48 jobs found

Job Title: Maritime Electrical Engineer Location: Portsmouth Naval Base. We offer a range of hybrid and flexible working arrangements. Please speak to your recruiter about the options for this particular role Salary: Up to £42,000 depending on skills and experience What you'll be doing: Applies knowledge, skill & experience in company products, services, approaches, techniques and governance. Applies experience and works across a range of standard products and services, resolves common engineering problems. Working under technical supervision Obtain confirmation beyond reasonable doubt by review, surveillance and audit that those assumptions, underpinning engineering data, analysis methodologies, and interpretation of results have been validated Define the qualification obligations for the assurance hold points during build, test and commissioning Working under technical supervision, undertake functional design and/or provide advice and qualification for the scope of responsibility and provide evidence for acceptance, fitness for purpose, regulatory & legislative requirements, and safety Liaise with both internal and external stakeholders as required ensuring that their requirements are adequately supported and that their needs are fully considered and incorporated where appropriate and agreed Contribute to identification and closure of issues emerging from all product lifecycle stages and to manage the resulting change embodiment activities Provide realistic programme status, identify problem areas and implement agreed recovery plans Provide support for assurance that the design is adequate i.e. it is robust and provide supporting documentation for the safety case Your skills and experiences: Relevant experience within an Electrical Engineering discipline Systems knowledge of power and distribution & controls systems experience Understands engineering approaches, processes and procedures HNC/HND or an electrical apprenticeship is preferred Benefits: As well as a competitive pension scheme, BAE Systems also offers employee share plans, an extensive range of flexible discounted health, wellbeing and lifestyle benefits, including a green car scheme, private health plans and shopping discounts - you may also be eligible for an annual incentive. The Warship Technical Authority Power and Propulsion team: The primary responsibility of this role is to ensure the design intent and safety of the QEC platform and to collate the assurance evidence of this for the corresponding Warship Assurance Team while working as directed by the QEC principal Electrical Engineer - Power and Propulsion, under the definitive engineering authority of the QEC WTA (Warship Technical Authority) Class Lead Engineer. Why BAE Systems? This is a place where you'll be able to make a real difference. You'll be part of an inclusive culture that values diversity of thought, rewards integrity, and merit, and where you'll be empowered to fulfil your potential. We welcome people from all backgrounds and want to make sure that our recruitment processes are as inclusive as possible. If you have a disability or health condition (for example dyslexia, autism, an anxiety disorder etc .) that may affect your performance in certain assessment types, please speak to your recruiter about potential reasonable adjustments. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date: 1st May 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible.

Job Title: Maritime Electrical Engineer Location: Portsmouth Naval Base. We offer a range of hybrid and flexible working arrangements. Please speak to your recruiter about the options for this particular role Salary: Up to £42,000 depending on skills and experience What you'll be doing: Applies knowledge, skill & experience in company products, services, approaches, techniques and governance. Applies experience and works across a range of standard products and services, resolves common engineering problems. Working under technical supervision Obtain confirmation beyond reasonable doubt by review, surveillance and audit that those assumptions, underpinning engineering data, analysis methodologies, and interpretation of results have been validated Define the qualification obligations for the assurance hold points during build, test and commissioning Working under technical supervision, undertake functional design and/or provide advice and qualification for the scope of responsibility and provide evidence for acceptance, fitness for purpose, regulatory & legislative requirements, and safety Liaise with both internal and external stakeholders as required ensuring that their requirements are adequately supported and that their needs are fully considered and incorporated where appropriate and agreed Contribute to identification and closure of issues emerging from all product lifecycle stages and to manage the resulting change embodiment activities Provide realistic programme status, identify problem areas and implement agreed recovery plans Provide support for assurance that the design is adequate i.e. it is robust and provide supporting documentation for the safety case Your skills and experiences: Relevant experience within an Electrical Engineering discipline Systems knowledge of power and distribution & controls systems experience Understands engineering approaches, processes and procedures HNC/HND or an electrical apprenticeship is preferred Benefits: As well as a competitive pension scheme, BAE Systems also offers employee share plans, an extensive range of flexible discounted health, wellbeing and lifestyle benefits, including a green car scheme, private health plans and shopping discounts - you may also be eligible for an annual incentive. The Warship Technical Authority Power and Propulsion team: The primary responsibility of this role is to ensure the design intent and safety of the QEC platform and to collate the assurance evidence of this for the corresponding Warship Assurance Team while working as directed by the QEC principal Electrical Engineer - Power and Propulsion, under the definitive engineering authority of the QEC WTA (Warship Technical Authority) Class Lead Engineer. Why BAE Systems? This is a place where you'll be able to make a real difference. You'll be part of an inclusive culture that values diversity of thought, rewards integrity, and merit, and where you'll be empowered to fulfil your potential. We welcome people from all backgrounds and want to make sure that our recruitment processes are as inclusive as possible. If you have a disability or health condition (for example dyslexia, autism, an anxiety disorder etc .) that may affect your performance in certain assessment types, please speak to your recruiter about potential reasonable adjustments. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date: 1st May 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible.

Job Title: Maritime Electrical Engineer Location: Portsmouth Naval Base. We offer a range of hybrid and flexible working arrangements. Please speak to your recruiter about the options for this particular role Salary: Up to £42,000 depending on skills and experience What you'll be doing: Applies knowledge, skill & experience in company products, services, approaches, techniques and governance. Applies experience and works across a range of standard products and services, resolves common engineering problems. Working under technical supervision Obtain confirmation beyond reasonable doubt by review, surveillance and audit that those assumptions, underpinning engineering data, analysis methodologies, and interpretation of results have been validated Define the qualification obligations for the assurance hold points during build, test and commissioning Working under technical supervision, undertake functional design and/or provide advice and qualification for the scope of responsibility and provide evidence for acceptance, fitness for purpose, regulatory & legislative requirements, and safety Liaise with both internal and external stakeholders as required ensuring that their requirements are adequately supported and that their needs are fully considered and incorporated where appropriate and agreed Contribute to identification and closure of issues emerging from all product lifecycle stages and to manage the resulting change embodiment activities Provide realistic programme status, identify problem areas and implement agreed recovery plans Provide support for assurance that the design is adequate i.e. it is robust and provide supporting documentation for the safety case Your skills and experiences: Relevant experience within an Electrical Engineering discipline Systems knowledge of power and distribution & controls systems experience Understands engineering approaches, processes and procedures HNC/HND or an electrical apprenticeship is preferred Benefits: As well as a competitive pension scheme, BAE Systems also offers employee share plans, an extensive range of flexible discounted health, wellbeing and lifestyle benefits, including a green car scheme, private health plans and shopping discounts - you may also be eligible for an annual incentive. The Warship Technical Authority Power and Propulsion team: The primary responsibility of this role is to ensure the design intent and safety of the QEC platform and to collate the assurance evidence of this for the corresponding Warship Assurance Team while working as directed by the QEC principal Electrical Engineer - Power and Propulsion, under the definitive engineering authority of the QEC WTA (Warship Technical Authority) Class Lead Engineer. Why BAE Systems? This is a place where you'll be able to make a real difference. You'll be part of an inclusive culture that values diversity of thought, rewards integrity, and merit, and where you'll be empowered to fulfil your potential. We welcome people from all backgrounds and want to make sure that our recruitment processes are as inclusive as possible. If you have a disability or health condition (for example dyslexia, autism, an anxiety disorder etc .) that may affect your performance in certain assessment types, please speak to your recruiter about potential reasonable adjustments. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date: 1st May 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible.

Job Title: Maritime Electrical Engineer Location: Portsmouth Naval Base. We offer a range of hybrid and flexible working arrangements. Please speak to your recruiter about the options for this particular role Salary: Up to £42,000 depending on skills and experience What you'll be doing: Applies knowledge, skill & experience in company products, services, approaches, techniques and governance. Applies experience and works across a range of standard products and services, resolves common engineering problems. Working under technical supervision Obtain confirmation beyond reasonable doubt by review, surveillance and audit that those assumptions, underpinning engineering data, analysis methodologies, and interpretation of results have been validated Define the qualification obligations for the assurance hold points during build, test and commissioning Working under technical supervision, undertake functional design and/or provide advice and qualification for the scope of responsibility and provide evidence for acceptance, fitness for purpose, regulatory & legislative requirements, and safety Liaise with both internal and external stakeholders as required ensuring that their requirements are adequately supported and that their needs are fully considered and incorporated where appropriate and agreed Contribute to identification and closure of issues emerging from all product lifecycle stages and to manage the resulting change embodiment activities Provide realistic programme status, identify problem areas and implement agreed recovery plans Provide support for assurance that the design is adequate i.e. it is robust and provide supporting documentation for the safety case Your skills and experiences: Relevant experience within an Electrical Engineering discipline Systems knowledge of power and distribution & controls systems experience Understands engineering approaches, processes and procedures HNC/HND or an electrical apprenticeship is preferred Benefits: As well as a competitive pension scheme, BAE Systems also offers employee share plans, an extensive range of flexible discounted health, wellbeing and lifestyle benefits, including a green car scheme, private health plans and shopping discounts - you may also be eligible for an annual incentive. The Warship Technical Authority Power and Propulsion team: The primary responsibility of this role is to ensure the design intent and safety of the QEC platform and to collate the assurance evidence of this for the corresponding Warship Assurance Team while working as directed by the QEC principal Electrical Engineer - Power and Propulsion, under the definitive engineering authority of the QEC WTA (Warship Technical Authority) Class Lead Engineer. Why BAE Systems? This is a place where you'll be able to make a real difference. You'll be part of an inclusive culture that values diversity of thought, rewards integrity, and merit, and where you'll be empowered to fulfil your potential. We welcome people from all backgrounds and want to make sure that our recruitment processes are as inclusive as possible. If you have a disability or health condition (for example dyslexia, autism, an anxiety disorder etc .) that may affect your performance in certain assessment types, please speak to your recruiter about potential reasonable adjustments. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date: 1st May 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible.

Job Title: Maritime Electrical Engineer Location: Portsmouth Naval Base. We offer a range of hybrid and flexible working arrangements. Please speak to your recruiter about the options for this particular role Salary: Up to £42,000 depending on skills and experience What you'll be doing: Applies knowledge, skill & experience in company products, services, approaches, techniques and governance. Applies experience and works across a range of standard products and services, resolves common engineering problems. Working under technical supervision Obtain confirmation beyond reasonable doubt by review, surveillance and audit that those assumptions, underpinning engineering data, analysis methodologies, and interpretation of results have been validated Define the qualification obligations for the assurance hold points during build, test and commissioning Working under technical supervision, undertake functional design and/or provide advice and qualification for the scope of responsibility and provide evidence for acceptance, fitness for purpose, regulatory & legislative requirements, and safety Liaise with both internal and external stakeholders as required ensuring that their requirements are adequately supported and that their needs are fully considered and incorporated where appropriate and agreed Contribute to identification and closure of issues emerging from all product lifecycle stages and to manage the resulting change embodiment activities Provide realistic programme status, identify problem areas and implement agreed recovery plans Provide support for assurance that the design is adequate i.e. it is robust and provide supporting documentation for the safety case Your skills and experiences: Relevant experience within an Electrical Engineering discipline Systems knowledge of power and distribution & controls systems experience Understands engineering approaches, processes and procedures HNC/HND or an electrical apprenticeship is preferred Benefits: As well as a competitive pension scheme, BAE Systems also offers employee share plans, an extensive range of flexible discounted health, wellbeing and lifestyle benefits, including a green car scheme, private health plans and shopping discounts - you may also be eligible for an annual incentive. The Warship Technical Authority Power and Propulsion team: The primary responsibility of this role is to ensure the design intent and safety of the QEC platform and to collate the assurance evidence of this for the corresponding Warship Assurance Team while working as directed by the QEC principal Electrical Engineer - Power and Propulsion, under the definitive engineering authority of the QEC WTA (Warship Technical Authority) Class Lead Engineer. Why BAE Systems? This is a place where you'll be able to make a real difference. You'll be part of an inclusive culture that values diversity of thought, rewards integrity, and merit, and where you'll be empowered to fulfil your potential. We welcome people from all backgrounds and want to make sure that our recruitment processes are as inclusive as possible. If you have a disability or health condition (for example dyslexia, autism, an anxiety disorder etc .) that may affect your performance in certain assessment types, please speak to your recruiter about potential reasonable adjustments. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date: 1st May 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible.

Job Title: Maritime Electrical Engineer Location: Portsmouth Naval Base. We offer a range of hybrid and flexible working arrangements. Please speak to your recruiter about the options for this particular role Salary: Up to £42,000 depending on skills and experience What you'll be doing: Applies knowledge, skill & experience in company products, services, approaches, techniques and governance. Applies experience and works across a range of standard products and services, resolves common engineering problems. Working under technical supervision Obtain confirmation beyond reasonable doubt by review, surveillance and audit that those assumptions, underpinning engineering data, analysis methodologies, and interpretation of results have been validated Define the qualification obligations for the assurance hold points during build, test and commissioning Working under technical supervision, undertake functional design and/or provide advice and qualification for the scope of responsibility and provide evidence for acceptance, fitness for purpose, regulatory & legislative requirements, and safety Liaise with both internal and external stakeholders as required ensuring that their requirements are adequately supported and that their needs are fully considered and incorporated where appropriate and agreed Contribute to identification and closure of issues emerging from all product lifecycle stages and to manage the resulting change embodiment activities Provide realistic programme status, identify problem areas and implement agreed recovery plans Provide support for assurance that the design is adequate i.e. it is robust and provide supporting documentation for the safety case Your skills and experiences: Relevant experience within an Electrical Engineering discipline Systems knowledge of power and distribution & controls systems experience Understands engineering approaches, processes and procedures HNC/HND or an electrical apprenticeship is preferred Benefits: As well as a competitive pension scheme, BAE Systems also offers employee share plans, an extensive range of flexible discounted health, wellbeing and lifestyle benefits, including a green car scheme, private health plans and shopping discounts - you may also be eligible for an annual incentive. The Warship Technical Authority Power and Propulsion team: The primary responsibility of this role is to ensure the design intent and safety of the QEC platform and to collate the assurance evidence of this for the corresponding Warship Assurance Team while working as directed by the QEC principal Electrical Engineer - Power and Propulsion, under the definitive engineering authority of the QEC WTA (Warship Technical Authority) Class Lead Engineer. Why BAE Systems? This is a place where you'll be able to make a real difference. You'll be part of an inclusive culture that values diversity of thought, rewards integrity, and merit, and where you'll be empowered to fulfil your potential. We welcome people from all backgrounds and want to make sure that our recruitment processes are as inclusive as possible. If you have a disability or health condition (for example dyslexia, autism, an anxiety disorder etc .) that may affect your performance in certain assessment types, please speak to your recruiter about potential reasonable adjustments. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date: 1st May 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible.

Important: All applicants must be able to obtain Security Clearance and must hold sole British Nationality as a minimum. Working: The role offers flexible & hybrid working. It would be beneficial to be on-site 5 days a week - We are seeking a Multi Skilled Maintenance Operator to join our one of our major defence clients to service Equipment. This will involve working on Process and Plant equipment, Nitrogen Systems, Environmental Chambers, high- and low-pressure systems and ESD Protective areas and equipment. You will work on extremely varied, interesting and challenging. - Role Responsibilities: Working in a multi discipline team to support the Operations team. Ensure that both factory and proprietary test and measuring equipment is maintained in line with current procedures. Carry out repair tasks in accordance with departmental processes and procedures. Generating clear and comprehensive maintenance records for traceability purposes. The work is challenging, rewarding and extremely varied. Qualifications required (all of the below): Electrical Engineering / Manufacturing Apprenticeship (Advanced Level or L3 Standard) Electrical Engineering / Manufacturing Level 3 academic qualification (ONC, diploma, etc.) Electrical Engineering / Manufacturing Level 3 vocational qualification (NVQ - not required if you have achieved a L3 apprenticeship standard Skill and Experience; Experience in the maintenance and repair of plant and process equipment. Be competent in following manufacturer's instructions on preventative and routine maintenance requirements. Proactive attitude to daily tasking and be able to deal with multiple issues, tasks and priorities concurrently. Demonstrated knowledge of defect investigations and fault diagnosis. Good attitude to quality and safety. Desirable Experience; Experience in the Defence or safety regulated environment would be advantageous Experience in the Naval / Maritime domain would be advantageous. Familiarity with vacuum systems, temperature cycling systems and dew-point testing would be an advantage. A good understanding of SAP would be desirable. Desirable: 18th Edition IET Wiring Regulations, IET Code of Practice for In-Service inspection & Testing of Electrical Equipment. Experience of operating low- and high-pressure air processing and test facilities (including bottled gas systems) beneficial. Experience of working on Environmental Chambers an advantage. Experience in an electronics manufacturing environment an advantage - - Even If you feel like you don't meet every qualification, we encourage you to reach out an apply. - Company Benefits; Bonus : Up to 2,500 (based on performance). Pension : Up to 14% total contribution. Parental Leave : Enhanced parental, maternity, and shared parental leave. Flexi Leave : Up to 15 additional days. Facilities : On-site perks like subsidised meals and free parking. Training and Development : Excellent opportunities for career progression and skill development Company Details; The company are a multi-national group, being No 1 in Europe for what they do! With a number of awards and recognitions, with great career progression and opportunities across the business! It's no wonder, they have been among the winners of the annual Glassdoor Employees' Choice Awards, 2022, and most recently receiving three accreditation gold standard awards with Investors in People! "Interesting work. Good work-life balance. Employees made to feel valued." Software Engineer, 5 Dec 2022. Glassdoor review. "Promotes and believes in a good work/life balance interesting work on most programmes Encourages internal mobility. Offers good development/training opportunities" Principal Systems Engineer, 19 Dec 2022. Glassdoor review. True advocates of ED&I as an Equal Opportunity Employer! With over 10 Networking groups and communities across the business advocating Equity, Diversity and Inclusion. Enhanced parental leave: Offers up to 26 weeks for maternity, adoption and shared parental leave. Enhancements are available for paternity leave, neonatal leave and fertility testing and treatments. For full information, please get in touch

Regulatory Compliance Engineer Remote, (occasional travel, 1-2 days per month) £50 - 60 p/hour Initial 12 month fixed term contract Talent Locker are pleased to be partnered with an innovative engineering consultancy, recruiting for a Regulatory Compliance Engineer. This is a fantastic opportunity to work closely with one of the UK's key Defence customers, ensuring products meet strict regulatory, safety and legislative requirements across complex, electrical and electronic systems within the maritime environment. This is a pure regulatory compliance role, focused on ensuring engineering products meet UK and international compliance standards. You will act as a key point of expertise for CE/UKCA marking and associated legislation, working across engineering teams, suppliers, and technical stakeholders to ensure full product conformity. The role sits within a highly regulated Defence environment, supporting both new product development and in-service equipment. Responsibilities Review supplier documentation including technical files, declarations of conformity, bills of materials, and compliance reports Ensure products meet CE/UKCA marking requirements and associated legislation Assess compliance against relevant directives including EMC, Low Voltage, RoHS, and REACH Liaise with engineers, programme managers, and suppliers to resolve compliance gaps Support peer review of technical requirements, compliance matrices, and contract documentation Provide expert guidance on regulatory compliance to engineering teams Contribute to continuous improvement of compliance processes and governance Attend occasional supplier or stakeholder meetings Key experience required Strong experience in product regulatory compliance (CE/UKCA marking essential) Background in electrical, electronic, or electro-mechanical engineering Experience working with regulated products in industries such as Defence, Aerospace, Maritime, Rail, or similar Working knowledge of key regulations including EMC, Low Voltage Directive, RoHS, and REACH Experience reviewing technical documentation and supplier compliance evidence Experience of working in a defence or maritime engineering environment would be advantageous but is not essential. This position operates a flexible working model and is predominantly remote, with adhoc travel to client sites (likely 1-2 days per week). Initial 12 month contract with strong potential for extension or permanent employment.

Job Title: Maritime Electrical Engineer Location: Portsmouth Naval Base. We offer a range of hybrid and flexible working arrangements. Please speak to your recruiter about the options for this particular role Salary: Up to £42,000 depending on skills and experience What you'll be doing: Applies knowledge, skill & experience in company products, services, approaches, techniques and governance. Applies experience and works across a range of standard products and services, resolves common engineering problems. Working under technical supervision Obtain confirmation beyond reasonable doubt by review, surveillance and audit that those assumptions, underpinning engineering data, analysis methodologies, and interpretation of results have been validated Define the qualification obligations for the assurance hold points during build, test and commissioning Working under technical supervision, undertake functional design and/or provide advice and qualification for the scope of responsibility and provide evidence for acceptance, fitness for purpose, regulatory & legislative requirements, and safety Liaise with both internal and external stakeholders as required ensuring that their requirements are adequately supported and that their needs are fully considered and incorporated where appropriate and agreed Contribute to identification and closure of issues emerging from all product lifecycle stages and to manage the resulting change embodiment activities Provide realistic programme status, identify problem areas and implement agreed recovery plans Provide support for assurance that the design is adequate i.e. it is robust and provide supporting documentation for the safety case Your skills and experiences: Relevant experience within an Electrical Engineering discipline Systems knowledge of power and distribution & controls systems experience Understands engineering approaches, processes and procedures HNC/HND or an electrical apprenticeship is preferred Benefits: As well as a competitive pension scheme, BAE Systems also offers employee share plans, an extensive range of flexible discounted health, wellbeing and lifestyle benefits, including a green car scheme, private health plans and shopping discounts - you may also be eligible for an annual incentive. The Warship Technical Authority Power and Propulsion team: The primary responsibility of this role is to ensure the design intent and safety of the QEC platform and to collate the assurance evidence of this for the corresponding Warship Assurance Team while working as directed by the QEC principal Electrical Engineer - Power and Propulsion, under the definitive engineering authority of the QEC WTA (Warship Technical Authority) Class Lead Engineer. Why BAE Systems? This is a place where you'll be able to make a real difference. You'll be part of an inclusive culture that values diversity of thought, rewards integrity, and merit, and where you'll be empowered to fulfil your potential. We welcome people from all backgrounds and want to make sure that our recruitment processes are as inclusive as possible. If you have a disability or health condition (for example dyslexia, autism, an anxiety disorder etc .) that may affect your performance in certain assessment types, please speak to your recruiter about potential reasonable adjustments. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date: 1st May 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible.

Our client BAE Systems, a prominent player in the Defence & Security sector, is currently seeking a Principal Electrical Engineer to join their team on a contract basis. This opportunity involves working on vital projects within the maritime services business unit. The role will be predominantly site-based at either Cowes, Great Baddow or Broad Oak in Portsmouth with hybrid arrangements allowing for 4 days on-site. You will be working within a high-security clearance environment, contributing to critical design and engineering activities over a period of 6 months. Key Responsibilities: Apply depth and breadth of design expertise to generate electrical design solutions for new products and technology integrations into legacy products. Generate detailed designs from concept to completion, addressing a range of complex engineering issues. Function as an engineering, technical, or design authority for Line Replacement Units or subsystems. Core Duties: Design AC & DC distribution systems including sizing, protection, control, and specifying power supplies and converters. Work on motor drives, control, and positioning systems. Manage data links, protocols, networks, and EMC verification. Specify bespoke procured hardware. Conduct design verification using simulation, analysis, and test techniques, including support to EMC test houses and customer installations. Engage in integration activities within a complex equipment environment. Generate design documentation and technical reports; vet documentation generated by others. Interface with related disciplines like systems engineering, mechanical/thermal engineering, Integrated Logistics Support, Safety, and manufacturing. Ensure adherence to the Engineering Lifecycle and conduct progress, peer, and design reviews. Contribute to bids, proposals, and estimates; provide technical leadership and guidance on electrical matters. Job Requirements: Experience in generating component-level designs for volume production. Previous experience in operating within a defence or high safety integrity environment. Familiarity with the IET 17th Edition Wiring Regulations, Low Voltage Directive, European Electrical Safety Standards, and EMC qualification to DEF STAN 59-411. Experience in design proving, integration, and defect resolution. Rigorous approach to the safety aspects associated with high power/high voltage equipment. Degree in Electrical Engineering or a strongly related subject. Skills: Proficient in technical specifications aligned to the functional area of activity. Recognised within the team or project as a source of authoritative knowledge. Experience acting as Design Authority, Technical Authority, or Engineering Authority. Capable of performing analysis, evaluation, and resolution of complex engineering issues and specifications. Safety Responsibilities: Take reasonable care for your own health and safety. Ensure high standards for safety, health, and environment (SHE) in the organisation. Cooperate and follow all reasonable instructions, information, and training. Report work-related hazards or incidents and use equipment for its intended purpose. If you are an experienced Electrical Engineer looking for a challenging role within the defence sector, we encourage you to apply now to join our client's dynamic team.

Regulatory Compliance Engineer Remote, (occasional travel, 1-2 days per month) 50 - 60 p/hour Initial 12 month fixed term contract Talent Locker are pleased to be partnered with an innovative engineering consultancy, recruiting for a Regulatory Compliance Engineer. This is a fantastic opportunity to work closely with one of the UK's key Defence customers, ensuring products meet strict regulatory, safety and legislative requirements across complex, electrical and electronic systems within the maritime environment. This is a pure regulatory compliance role, focused on ensuring engineering products meet UK and international compliance standards. You will act as a key point of expertise for CE/UKCA marking and associated legislation, working across engineering teams, suppliers, and technical stakeholders to ensure full product conformity. The role sits within a highly regulated Defence environment, supporting both new product development and in-service equipment. Responsibilities Review supplier documentation including technical files, declarations of conformity, bills of materials, and compliance reports Ensure products meet CE / UKCA marking requirements and associated legislation Assess compliance against relevant directives including EMC, Low Voltage, RoHS, and REACH Liaise with engineers, programme managers, and suppliers to resolve compliance gaps Support peer review of technical requirements, compliance matrices, and contract documentation Provide expert guidance on regulatory compliance to engineering teams Contribute to continuous improvement of compliance processes and governance Attend occasional supplier or stakeholder meetings Key experience required Strong experience in product regulatory compliance (CE / UKCA marking essential) Background in electrical, electronic, or electro-mechanical engineering Experience working with regulated products in industries such as Defence, Aerospace, Maritime, Rail, or similar Working knowledge of key regulations including EMC, Low Voltage Directive, RoHS, and REACH Experience reviewing technical documentation and supplier compliance evidence Experience of working in a defence or maritime engineering environment would be advantageous but is not essential. This position operates a flexible working model and is predominantly remote, with adhoc travel to client sites (likely 1-2 days per week). Initial 12 month contract with strong potential for extension or permanent employment.

Role: Assistant Project Manager Location: Plymouth Duration: 12 months Inside IR35 About our client: Our client in Devonport is a leading engineering and maritime organisation specialising in the maintenance, repair, and overhaul of naval vessels. The site operates with a skilled workforce across mechanical, electrical, and technical disciplines, delivering high-quality and complex engineering projects. It offers a structured and collaborative working environment with opportunities for hands-on experience and professional development. Purpose of the role The Assistant Project Manager shall support the Package Manager in managing the delivery of the Building C design. This new post shall help the team in managing the new changes to the Building C designs brought about by the electrical change and allow for a dedicated resource to manage the change. This post shall support the current programme challenge and support the handover to ops date as efficiently as possible. The Major Infrastructure Projects directorate provides major new or upgraded dock, berth and building infrastructure projects to provide facilities for the ship and submarine sustainment programmes at Devonport. This is an exciting opportunity to progress your career and assist in the delivery of Defence design and safety engineering projects, with opportunities for further development and progression within the Company. Required Knowledge, Skills, Experience and Competences The candidate must have experience of working within a project environment managing Civil and or Mechanical Systems designs packages, ideally with client side NEC4 contract experience. Knowledge of highly regulated environments (preferably Nuclear) and complex document management systems. The project will be on the Nuclear Licensed site and therefore experience in delivery of Nuclear safety implicated structures, equipment or services would be of benefit. A Bachelors or Master's Degree - desired. APM project management qualification PFQ/PMQ (or equivalent) - desired. NEC4 Accredited Project Manager - desired Please apply if you want to join a Global Defence and Security organisation!

Systems Engineer required ideally with Maritime Defence or Radio Naval Navigation industry experience to manage external customer driven product concept, design, development and delivery with cross functional internal teams including Software, Mechanical and Electrical disciplines. Requirements British Citizen eligible for UK Security clearance. Defence engineering experience of systems and product lifecycles from concept design, integration and test. Valid UK Driving License Beneficial Radar, Radio System, communications protocols systems and bid proposal knowledge. Naval Platform, Navigation equipment electronics EMC, ESD skills. This is a fantastic opportunity to join a cutting edge technical team working on very exciting detection and navigation military systems.

SRT Marine Systems plc (SRT) is a market leader in the domain of international marine surveillance technology and systems. We are a respected, established, and an ambitious multi-national company headquartered in the UK with a global customer base. The company has a worldwide impact in the marine sector by leading the next generation of maritime domain awareness technologies, products, and systems that significantly enhance security, safety, environmental protection, and sustainability. Our customers are global and range from the largest national coast guards to individual vessel owners. SRT is an exciting company where high-quality results are rewarded. We are ambitious and constantly seek to innovate in order to deliver better products and services to our customers. We strive to make SRT a rewarding and challenging place to work, where talented, hard-working individuals have the opportunity to make a real impact across the marine industry. Role Overview - Programme Director The role of Programme Director will be permanently located in East Africa or willing to work a set in-country working pattern. You as an individual will have previous experience of working in the Africa's region and either already live in; or be willing to relocate to country for the duration of the project. The role is an extremely "hands-on" position where you will have overall management of SRT in-country teams. Here you will be instrumental in the management and execution of significant complex projects that involve the building of infrastructure such as data centres, control rooms, communication towers and commercial buildings, along with the installation of complex electrical systems that include power systems and sensitive communication equipment across a number of our projects in the East Africa region. The role is to understand, plan and manage the required process to complete the projects and to co-ordinate and actively manage the multiple contractors, and SRT's own resources and logistics to successfully complete each site and ultimately the whole project. You as our Programme Director will be able to demonstrate a track record of managing and delivering similar projects in non-Western countries. You will be highly organised and able to see the "big picture" whilst also being able to identify and manage critical path project streams effectively and efficiently. ESSENTIAL - Extensive experience as a Programme / Project Director for similar multi-site IT systems - ideally communication-based civil and technical infrastructure ESSENTIAL - Significant and demonstrable experience and success in the management and delivery of civil engineering and construction projects ESSENTIAL - Significant and demonstrable experience and success in the delivery of facilities installation and fit-out projects (internationally) ESSENTIAL - Previous working experience on projects whilst being located in the Africa's regions Responsibilities (not exhaustive) - Programme Director Work directly with and manage end customers and ICP in the field to manage and drive the project delivery plan, ensuring quality of delivery within the cost and time parameters set by the Chief Operating Officer Ensure that ICP works in strict accordance with SRT systems delivery methods, providing training and ongoing guidance and support to ensure successful installation and commissioning of the entire system Ensure a holistic project implementation approach such that the finished system installation meets both the contracted specifications and inevitable small finishing details are not missed to ensure complete end customer satisfaction and a project implementation that provides a platform for continued future business with the end customer Working with the Delivery Department, to continuously maintain and manage an accurate project plan and budget Frequent visits to customer countries and sites to review and manage activities, progress and maintain alignment in understanding of the project status, and to communicate and agree any changes in the project plan Manage and oversee the construction, installation and configuration work done by ICP and 3rd parties Arrange training for customers and ICP. Liaise with the Delivery Team to ensure delivery of training according to the agreed plan and contract requirements Provide clear and concise updates to SRT management on status, progress and potential risks and issues to the successful delivery of the project Experience & Qualifications - Programme Director Exceptionally experienced in a "hands-on" approach to projects and programme management, with being involved in the day-to-day activities of installation and troubleshooting, along with the overall management of the projects A Civil Engineering and / or IT networking background and / or qualification - degree Capable of understanding systems drawings down to installation design drawings (racks, servers, cameras, radar, civil work) with role being in-country conduit between in-country partner/customer back to our technical teams and Delivery Director Able to demonstrate the ability to diplomatically influence without authority with the ability to empathise and understand different cultures to flex approach whilst ensuring the target job is achieved Willingness to travel anywhere in the world for extended periods, with the role being primarily based in country with short trips back to UK during project execution What we offer in return: Highly Competitive salary Extensive and supportive relocation and ongoing benefits support package Private healthcare Flexible / Hybrid working options SRT Marine Systems plc are an equal opportunity employer. We are committed to creating an inclusive working environment for all employees and actively encourage applications from all sectors of the community. Please be aware you will be required to obtain in-country VISA for this position.

System Design Engineer - Redhill, Surrey Salary: Competitive Location: Redhill (Hybrid available after probation) Are you an experienced electrical or systems design engineer looking for a role where you can genuinely influence technical direction? This is an exciting opportunity to join a growing engineering team, working on sophisticated electro-mechanical projects that support critical maritime and defence technology. You'll collaborate with engineers across disciplines, shape design standards, and produce high-quality electrical and mechanical drawings used across major projects. What you'll be doing You'll take the lead on producing detailed technical drawings, documentation, and design outputs, including: Creating electrical and mechanical drawings to recognised industry standards (2D and 3D). Developing design concepts from first principles , including electrical enclosures, control panels, and 19" rack systems. Producing STEP files and other deliverables for internal teams and customers. Applying technical standards including BS7671 , BS8888:2017 , and regulations around EMC, LVD and the Electricity at Work Act. Using CAD tools (e.g. AutoCAD or electrical CAD packages) to deliver high-quality design outputs. Turning rough mechanical concepts into accurate, production-ready drawings. Supporting wider engineering and project teams with documentation, diagrams (including Visio), and technical input. What we're looking for You'll succeed in this role if you bring: A minimum HND/HNC, apprenticeship or equivalent qualification in a relevant engineering discipline. Five years' experience in electrical or systems design (desirable). Strong working knowledge of electrical safety directives , regulatory compliance , and engineering standards. Proficiency in CAD software (2D & 3D), with the confidence to help shape future CAD tool choices. Solid understanding of manufacturing techniques and material properties. A proactive, problem-solving attitude, with the ability to work independently and see tasks through to completion. Why this role stands out You'll have the chance to make a real impact on the technical direction of engineering projects. The work is varied, innovative, and technically rewarding-perfect for someone who thrives in a detailed, design-focused environment. You'll be working within a supportive team that values engineering excellence and continuous improvement. Work environment & progression Based in Redhill , with a hybrid working pattern available after probation. Opportunities for ongoing skills development and involvement in complex, high-value engineering programmes.

NavCom Field Service Engineer Salary: Up to £28,000 Location: Portsmouth (with UK & occasional international travel) Are you a hands-on engineer with a passion for maritime technology? This is an exciting opportunity to join a fast-paced, friendly engineering team working across an incredible variety of vessels-from super tankers to mega yachts. If you enjoy problem-solving, variety in your day, and the chance to work with cutting-edge navigation and communication systems, this role could be the perfect career step. What you'll be doing You'll play a key role in supporting maritime clients across the UK, delivering high-quality engineering services including: Conducting VDR-APTs and Radio Surveys . Installing, repairing, and maintaining GMDSS equipment , navigational systems , and VSAT satellite broadband . Working on retrofit projects , including full bridge system installations and major integrations. Travelling independently or with other engineers to vessel sites across the UK, with optional international assignments. What we're looking for A strong technical foundation: HNC/ONC/NVQ Level or equivalent in an engineering or IT-related discipline. Solid electronic/electrical engineering knowledge-marine experience highly desirable. A full UK driving licence and the ability to pass marine/offshore medical requirements. A valid passport for occasional overseas work. Ideally, experience as a Marine Service Engineer and/or a GMDSS Radio Operator/Maintainer Licence. What's in it for you Alongside a salary of up to £28,000 , you'll benefit from: Annual performance-related bonus. Pension contribution matched up to 7.5%. 25 days' holiday plus bank holidays. Free parking and access to an on-site gym (Redhill office) Why this role? You'll join a knowledgeable, supportive team with a genuine "can-do" attitude, working with leading technology brands and receiving ongoing manufacturer training. Every day brings something new, and your work will have a direct impact on keeping vessels safe, connected, and operational.

Are you a Sales or Business Development Engineer passionate about clean energy, electrification, and sustainable maritime solutions? We have an exciting opportunity if you have experience of developing strategic partnerships within major ports in the UK or Northern Europe. This position offers the opportunity to work at the forefront of global electrification and decarbonisation, delivering technically advanced solutions that have a tangible impact on the future of energy and infrastructure. This role provides direct influence on how ports across Northern Europe transition toward cleaner, electrified operations. Sales/Business Development Manager Ports & Shore Power £60k Basic + Excellent Bonus, Car Allowance & Healthcare Opportunity to work with a global industry leader Work from home. Ref: 25309 Proven experience in business development, sales, or solutions engineering within electrical power systems, industrial drives, or infrastructure projects, with a strong understanding of medium- and high-voltage electrical systems, power electronics and electrical infrastructure. Experience working with complex, engineered-to-order solutions and the ability to operate credibly with both engineering teams and senior customer stakeholders. Sales Manager / BDM - The Role: Drive business growth across the UK, Ireland, and Northern Europe within the ports and maritime infrastructure sector, with a focus on electrification and shore power solutions Develop and execute a regional business development strategy aligned with wider systems growth objectives. Identify, develop and convert opportunities in port electrification, shore power (LV/MV/HV), and supporting electrical infrastructure. Build and manage a strong sales pipeline using CRM tools and internal processes Act as the key technical-commercial interface with customers, supporting the development of compliant and competitive electrical system solutions. Support preparation of proposals, system designs and commercial offers, and participate in technical and contractual discussions Build and maintain relationships with port authorities, terminal operators, EPC contractors, utilities, and engineering consultants. Represent the business at industry events across the maritime and electrification sectors Collaborate internally with engineering, proposals, project management, and service teams to ensure smooth project handover and delivery. Regular travel across the UK, Ireland, and Northern Europe, with occasional international travel is required. Sales / BDM - The Person: Degree (or equivalent) in Electrical or Power Engineering, or a related discipline Strong experience in business development, technical sales, or solutions engineering within electrical power systems or industrial infrastructure Solid understanding of medium- and high-voltage systems, power electronics, and electrical distribution infrastructure Experience working with complex, engineered-to-order solutions Commercially astute with strong negotiation skills and a consultative approach to sales Able to engage confidently with both technical engineering teams and senior customer stakeholders Strategic thinker with the ability to execute and deliver results in a regional role Strong communication, presentation, and stakeholder management skills Self-motivated and able to work independently across a geographically dispersed region Ideal candidates will have direct experience in shore power (cold ironing) or port electrification projects, alongside a strong understanding of ports, terminals or heavy industrial environments. Familiarity with electrical standards and grid compliance across UK, Ireland and Northern Europe would be ideal as would an appreciation of decarbonisation drivers, funding mechanisms and regulatory pressures shaping the maritime sector. For further information and a confidential discussion, please contact Sharon Hill. AE1

Field Service Engineer Team Lead Portland 2/3 days pw on site FULL DRIVING LICENCE REQUIRED SC Clearance is required on a UKEO basis The Field Service Team Lead heads up the Field Service team who provide engineering support and maintenance through the engineering lifecycle of the product at designated customer locations. This will include planning, prioritising work, to ensure procurement, installation, testing and configuration requirements are met in accordance with relevant legislation, regulations and contractual requirements. Responsibilities, Accountabilities and Duties: To assist the Project Manager in the planning of engineering support, which includes (but not limited to) assembly and testing of manufactured items and cables in accordance with quality procedures and associated work instructions Head up the team to carry out installation and setting to work activities of project equipment, as detailed in the project installation and test plans Carry out installation and setting to work activities of project equipment, as detailed in the project installation and test plans Maintain and support routine maintenance cycles ensuring all quality and legal standards are met whilst helping to manage obsolescence Lead the Field Service Team through application of first line management skills Key Must Have skills: An engineering-based qualification at a minimum of HND level Experience of working with electrical/electronic systems, especially within the defence or maritime domain Lead a team with the ability to travel extensively both nationally and internationally as determined by customer field service requirements which can be at short notice Experience establishing and working to MoD Safety and regulatory standards with the ability to assess potential risks and document mitigating actions Ability to produce and or update project/technical documentation to meet Company, MoD and other customer standards Attendance at sea or land trials as required to measure, service and maintain equipment as necessary The experience/ability to establish and maintain good working relationships with internal and external stakeholders including, but not limited to, customers, suppliers, project teams and colleagues Desirable Knowledge of acoustics Knowledge of computer networks The ability to work in confined spaces Good interpersonal skills providing clear communication and documentation, with good oral and written skills If you have the skills and experience, please apply now and we will be in touch for a further converstion

Senior RF Engineer Edinburgh 12-month contract Paying up to 80p/h (Inside IR35) The Opportunity Our client is seeking a Senior RF Engineer to join a leading defence technology organisation developing cutting-edge radar systems for modern fighter aircraft and advanced maritime and airborne surveillance platforms. Key Responsibilities As an RF/Microwave Engineer, you will: Support the full hardware lifecycle from system concept through design, prototyping, test, verification, integration, and production support. Develop high-quality RF PCB and module designs using modern microwave technologies. Create test prototypes to validate and verify designs. Carry out detailed design activities from requirements capture through to verification. Produce and maintain clear technical documentation and reports under configuration management. Prepare manufacturing data packs and support subcontractors and manufacturing teams. Work closely with systems, electronics and test engineers to resolve complex integration challenges. Participate in and support design reviews and lifecycle management activities. Essential Skills & Experience A degree in Electrical & Electronic Engineering (BSc, BEng, MEng, MSc, PhD, EngD) is preferred, although closely related disciplines such as Physics will also be considered. Microwave PCB materials and RF design techniques RF/Microwave subsystem design Microwave design tools (e.g. AWR, ADS, SystemVue, MATLAB) EM simulation techniques (2D/3D), e.g. CST GaAs/GaN MMIC design and applications RF synthesiser design (DDS and PLL technologies) RF downconverter and digitiser design Passive microwave structure design Non-linear circuit simulation PCB schematic capture tools (e.g. Mentor) RF laboratory measurements (signal generators, spectrum analysers, vector network analysers) Requirements capture and technical report writing Design for manufacture and cost Disclaimer: This vacancy is being advertised by either Advanced Resource Managers Limited, Advanced Resource Managers IT Limited or Advanced Resource Managers Engineering Limited ("ARM"). ARM is a specialist talent acquisition and management consultancy. We provide technical contingency recruitment and a portfolio of more complex resource solutions. Our specialist recruitment divisions cover the entire technical arena, including some of the most economically and strategically important industries in the UK and the world today. We will never send your CV without your permission. Where the role is marked as Outside IR35 in the advertisement this is subject to receipt of a final Status Determination Statement from the end Client and may be subject to change.

New Job Opportunity - HV Electrical Engineer - 12 Month Contract - Based in Glasgow Location: Glasgow Hybrid Contract: 12 Months ongoing Inside IR35 Rate: Negotiable dependent on experience Essential experience: High Voltage Electrical Engineering Summary of the Role The Electrical Engineer (High Voltage) will be working as part of a multi-disciplinary engineering team within the Approval Authority. The primary purpose of the role is to directly support current operations and future programmes in respect to the high voltage system requirements, supporting nuclear facilities & the delivery of services across both of Our client s Defence sites. The team consists of Mechanical, Civil, Structural, Building Services, Electrical and Naval Architects who are responsible for the authorship, development, assessment, and maintenance of Engineering Design Substantiation for Our Client s Nuclear Facilities, ensuring Design Intent, Critical Safety Factors and Safety and Operational Requirements are met and are consistent with current good practice and legislative/regulatory requirements. Tasks Authoring, development, assessment, maintenance and management of the suite of Our Client s Nuclear Infrastructure Design Substantiation documents Authoring, development, assessment, maintenance and management of design changes/concessions Presentation of Our Client s Design substantiations, to Our Client s Due Process nuclear safety committees Production and development of Examination, Inspection, Maintenance & Testing (EIMT) Schedule, operating procedures and results to satisfy design requirements and safety case through life Producing/assessing Periodic Review of Safety reports Providing advice and direction to internal and external stakeholders Production of Independent Technical Assessment (ITA)/Independent Peer Review (IPR) Scopes of work Use a combination of general and specialist engineering knowledge and understanding to apply existing and emerging technology Apply appropriate theoretical and practical methods to design, develop, manufacture, construct, commission, operate, maintain, decommission and re-cycle engineering processes, systems, services and products in a nuclear/high risk environment Producing robust technical justification to allow for relevant high voltage electrical design modifications to be authorised within a high hazard industry Review technical reports and other safety case submissions from external contractors Check and review calculations and technical documents written by other members of staff Position Requirements Experience Essential: Experienced Electrical Engineer with previous knowledge of industrial plant and machinery in an HV environment (i.e. HV electrical supply network including cabling, substations, etc.) Knowledge of current design standards and working practices including British & European Standards Theoretical and practical skill and experience across concept design, detailed design and construction stages across a range of electrical engineering projects (ideally including industrial and/or maritime) Experience in the design assessment of HV electrical plant and equipment to withstand hazards Experience of authoring and producing robust technical justification and supporting documentation to allow for relevant electrical design modifications to be authorised within a high hazard industry Experience working on multi-discipline projects providing engineering input (ideally within industrial and/or maritime) Desirable: Ideal candidates would already have experience within Defence or nuclear environment Familiarity with safety case development techniques e.g. HAZID/HAZOP studies Experience of working in the UK nuclear industry (energy or defence), particularly in the design and assessment of safety-related structures, systems and components Knowledge of UK and US nuclear industry regulation and practice, and application of relevant nuclear-specific codes and standards Qualifications & Training Essential: For non-nuclear background candidates, a Nuclear introductory course would be required to be undertaken within 6 months of joining Minimum HNC or equivalent qualification in a relevant discipline Incorporated Engineer status or equivalent experience Desirable: Engineering degree Chartered Engineer Company information At First Recruitment Group we understand just how important it is to secure the right people. That is why our Recruitment Consultants always take the time to understand requirements in detail and offer sound advice to both clients and candidates. We actively recruit at all levels and this is a superb opportunity for role looking for new employment. As part of putting people first, we strive to be an equal opportunities employer and we are always looking to increase the diversity of our workforce, working closely with our clients to ensure everyone is included.