Job Title: Health and Safety Advisor - Capital Delivery and Engineering Location: Flexible across Southern Water's region (Isle of Wight to Kent) - Hybrid working (with an expectation of site/office presence for 3 days of the week which may be at either one of our sites or at our Falmer office) Contract Type: Permanent Hours: 37 hours per week Salary: Up to £58,500 for candidates who hold NEBOSH Level 6 Diploma (or equivalent) and have relevant industry and engineering experience. Circa £50,500 for candidates with a NEBOSH Level 3 General Certificate and relevant engineering or environmental experience, and ideally working towards NEBOSH Level 6 Diploma Where applicable, Southern Water will support progression to NEBOSH Level 6 as part of the role. About the role Are you passionate about creating safe, secure environments where employees and contractors can thrive? We are seeking a proactive and experienced Health and Safety Advisor to join our Capital Delivery team within the wider Health, Safety and Security (HSS) function at Southern Water. In this key role, you will provide professional health and safety advice and assurance across engineering and capital delivery projects, supporting compliance with legislation and helping to embed a strong safety culture across our infrastructure development and maintenance activities. You will work closely with engineering, design and project teams to influence safety from the earliest stages of project design, supporting HAZOP and safety design reviews, conduct site inspections as part of the pre-construction and commissioning phases, carry out auditing activities on our contractor management systems, and monitor safety performance and compliance with our CDM procedures, ensuring risks are effectively managed and lessons learned are shared. What you will be responsible for: Delivering and monitoring performance against Southern Water's Health, Safety and Security strategy and objectives within the Capital Delivery function. Providing expert health and safety advice to design, engineering and project teams, ensuring compliance with relevant legislation, industry best practice and Southern Water standards. Leading site inspections, hazard identification activities and root cause investigations on capital delivery projects. Supporting and influencing engineering and design teams through practical coaching and mentoring to strengthen health and safety compliance and capability. Providing technical advice in high-risk areas, including temporary works, Construction Design and Management (CDM), site set-up, excavations, service avoidance, chemical storage and hazardous substances. Leading and supporting incident investigations within your area of responsibility, producing clear reports and recommending corrective and preventative actions. What you'll bring to the role: Essential Comprehensive knowledge of UK health and safety legislation and its practical application within design, planning and construction environments. Proven experience working in a health and safety advisory role, ideally within construction, engineering or capital delivery. NEBOSH Level 6 Diploma (or equivalent) qualification. Strong knowledge and application of CDM 2015 Regulations, especially from the client and Principal Designer perspective. Excellent communication skills, including investigation interviewing, report writing and the ability to influence a wide range of stakeholders. Full UK driving licence, due to the multi-site nature of the role. Desirable Membership of IOSH at CertIOSH level as a minimum (CMIOSH or CFIOSH highly desirable). Exposure to process safety. An engineering background, particularly mechanical or electrical. Water Industry experience.
May 05, 2026
Full time
Job Title: Health and Safety Advisor - Capital Delivery and Engineering Location: Flexible across Southern Water's region (Isle of Wight to Kent) - Hybrid working (with an expectation of site/office presence for 3 days of the week which may be at either one of our sites or at our Falmer office) Contract Type: Permanent Hours: 37 hours per week Salary: Up to £58,500 for candidates who hold NEBOSH Level 6 Diploma (or equivalent) and have relevant industry and engineering experience. Circa £50,500 for candidates with a NEBOSH Level 3 General Certificate and relevant engineering or environmental experience, and ideally working towards NEBOSH Level 6 Diploma Where applicable, Southern Water will support progression to NEBOSH Level 6 as part of the role. About the role Are you passionate about creating safe, secure environments where employees and contractors can thrive? We are seeking a proactive and experienced Health and Safety Advisor to join our Capital Delivery team within the wider Health, Safety and Security (HSS) function at Southern Water. In this key role, you will provide professional health and safety advice and assurance across engineering and capital delivery projects, supporting compliance with legislation and helping to embed a strong safety culture across our infrastructure development and maintenance activities. You will work closely with engineering, design and project teams to influence safety from the earliest stages of project design, supporting HAZOP and safety design reviews, conduct site inspections as part of the pre-construction and commissioning phases, carry out auditing activities on our contractor management systems, and monitor safety performance and compliance with our CDM procedures, ensuring risks are effectively managed and lessons learned are shared. What you will be responsible for: Delivering and monitoring performance against Southern Water's Health, Safety and Security strategy and objectives within the Capital Delivery function. Providing expert health and safety advice to design, engineering and project teams, ensuring compliance with relevant legislation, industry best practice and Southern Water standards. Leading site inspections, hazard identification activities and root cause investigations on capital delivery projects. Supporting and influencing engineering and design teams through practical coaching and mentoring to strengthen health and safety compliance and capability. Providing technical advice in high-risk areas, including temporary works, Construction Design and Management (CDM), site set-up, excavations, service avoidance, chemical storage and hazardous substances. Leading and supporting incident investigations within your area of responsibility, producing clear reports and recommending corrective and preventative actions. What you'll bring to the role: Essential Comprehensive knowledge of UK health and safety legislation and its practical application within design, planning and construction environments. Proven experience working in a health and safety advisory role, ideally within construction, engineering or capital delivery. NEBOSH Level 6 Diploma (or equivalent) qualification. Strong knowledge and application of CDM 2015 Regulations, especially from the client and Principal Designer perspective. Excellent communication skills, including investigation interviewing, report writing and the ability to influence a wide range of stakeholders. Full UK driving licence, due to the multi-site nature of the role. Desirable Membership of IOSH at CertIOSH level as a minimum (CMIOSH or CFIOSH highly desirable). Exposure to process safety. An engineering background, particularly mechanical or electrical. Water Industry experience.
Babcock Mission Critical Services España SA.
Carlisle, Cumbria
Principal Mechanical Engineer Location: Egremont, Carlisle, GB, CA24 3HZ Onsite or Hybrid: Hybrid Role Type: Full time / Permanent Role ID: SF70329 Lead Engineering Excellence in Nuclear Decommissioning At Cavendish Nuclear, we're working to create a safe and secure world. If you join us, you can play your part as a Principal Mechanical Engineer at either of our Westlake's Science Park, Moor Row, or Warrington, Cheshire sites. The Role As a Principal Mechanical Engineer, you'll play a pivotal role in one of the UK's major civil nuclear decommissioning programmes. Working as a senior technical authority within a multidisciplinary engineering environment, you'll drive the integration of complex mechanical systems and develop innovative solutions that directly support the safe deconstruction and long term management of nuclear facilities. You'll lead engineering teams, oversee high integrity technical outputs, safeguard design quality, and act as a primary interface for customers-while mentoring engineers and championing continuous improvement across projects. This role places you at the technical forefront of a major expansion within the Cavendish Nuclear Design Services Alliance. Day-to-day Responsibilities Lead and manage multidisciplinary engineering teams to deliver high quality technical solutions. Supervise and mentor engineers and technical specialists to ensure performance and development. Act as a key liaison with customers, ensuring transparent communication and technical clarity. Oversee production, review, and approval of engineering outputs-including calculations, specifications, and reports. Champion safety, quality, and engineering best practice across all project activities. This is a full time position working 37 hours, 5 days per week, based at either Westlake's Science Park, Moor Row, or Warrington, Cheshire sites. Essential Experience Extensive experience leading multidisciplinary engineering teams and delivering complex technical projects. Proven ability to supervise and mentor engineers and technical specialists. Strong background in producing, reviewing, and approving detailed engineering outputs. Demonstrated expertise in applying procedures, codes, and standards to ensure compliance and integrity. Track record of effective customer engagement, issue resolution, and technical support. Qualifications Engineering degree (or equivalent) in a relevant engineering discipline. Benefits Matched contribution pension scheme, with life assurance. Access to a Digital GP, annual health check, and nutritional consultations through Aviva DigiCare+. Employee share scheme. Employee shopping savings portal. Payment of Professional Fees. Reservists in the armed forces receive 10 days of special paid leave. Holiday Trading allows employees to buy additional leave or sell up to one working week of annual leave from their entitlement (available February through March). 'Be Kind Day' enables employees to take one paid leave day a year (or equivalent hours) to volunteer with their chosen charity. Excellent development opportunities and benefits package, including an employee assistance programme supporting physical, mental, and financial wellbeing. Additional Information We are a disability confident committed employer. If you have a disability or need any reasonable adjustments during the application and selection stages, please email with the subject header "Reasonable adjustments requirement". We're committed to building an inclusive culture where everyone's free to thrive. We are happy to talk about flexible working - please ask about alternative patterns of work at interview.
May 05, 2026
Full time
Principal Mechanical Engineer Location: Egremont, Carlisle, GB, CA24 3HZ Onsite or Hybrid: Hybrid Role Type: Full time / Permanent Role ID: SF70329 Lead Engineering Excellence in Nuclear Decommissioning At Cavendish Nuclear, we're working to create a safe and secure world. If you join us, you can play your part as a Principal Mechanical Engineer at either of our Westlake's Science Park, Moor Row, or Warrington, Cheshire sites. The Role As a Principal Mechanical Engineer, you'll play a pivotal role in one of the UK's major civil nuclear decommissioning programmes. Working as a senior technical authority within a multidisciplinary engineering environment, you'll drive the integration of complex mechanical systems and develop innovative solutions that directly support the safe deconstruction and long term management of nuclear facilities. You'll lead engineering teams, oversee high integrity technical outputs, safeguard design quality, and act as a primary interface for customers-while mentoring engineers and championing continuous improvement across projects. This role places you at the technical forefront of a major expansion within the Cavendish Nuclear Design Services Alliance. Day-to-day Responsibilities Lead and manage multidisciplinary engineering teams to deliver high quality technical solutions. Supervise and mentor engineers and technical specialists to ensure performance and development. Act as a key liaison with customers, ensuring transparent communication and technical clarity. Oversee production, review, and approval of engineering outputs-including calculations, specifications, and reports. Champion safety, quality, and engineering best practice across all project activities. This is a full time position working 37 hours, 5 days per week, based at either Westlake's Science Park, Moor Row, or Warrington, Cheshire sites. Essential Experience Extensive experience leading multidisciplinary engineering teams and delivering complex technical projects. Proven ability to supervise and mentor engineers and technical specialists. Strong background in producing, reviewing, and approving detailed engineering outputs. Demonstrated expertise in applying procedures, codes, and standards to ensure compliance and integrity. Track record of effective customer engagement, issue resolution, and technical support. Qualifications Engineering degree (or equivalent) in a relevant engineering discipline. Benefits Matched contribution pension scheme, with life assurance. Access to a Digital GP, annual health check, and nutritional consultations through Aviva DigiCare+. Employee share scheme. Employee shopping savings portal. Payment of Professional Fees. Reservists in the armed forces receive 10 days of special paid leave. Holiday Trading allows employees to buy additional leave or sell up to one working week of annual leave from their entitlement (available February through March). 'Be Kind Day' enables employees to take one paid leave day a year (or equivalent hours) to volunteer with their chosen charity. Excellent development opportunities and benefits package, including an employee assistance programme supporting physical, mental, and financial wellbeing. Additional Information We are a disability confident committed employer. If you have a disability or need any reasonable adjustments during the application and selection stages, please email with the subject header "Reasonable adjustments requirement". We're committed to building an inclusive culture where everyone's free to thrive. We are happy to talk about flexible working - please ask about alternative patterns of work at interview.
Select how often (in days) to receive an alert: Posting Date: 20 Mar 2026 City: Manchester Location: Manchester, GB, M1 3LD Contract Type: Permanent Division: Power Engineering and Renewables Level of experience: Senior RINA is currently recruiting for a Power Systems Principal Consultant to join its office in Manchester. Why RINA? RINA is a global engineering and consulting company providing technical advisory, assurance, testing, inspection, and certification services across energy and infrastructure markets. With more than 150 years of engineering heritage and a global network of professionals operating in over 70 countries, RINA delivers innovative, safe, and sustainable solutions across the full project lifecycle. Our UK operations trace their origins to 1920 through the British Electrical and Allied Industries Research Association and continue to support complex electrical and infrastructure projects across multiple sectors. The Role This is a hybrid role: you will both manage the established Power Systems Engineering team and be the technical lead for Substation design and construction projects, the focus being electro mechanical engineering, to deliver a wide range of local and international projects for commercial, industrial and utility clients. Technical Responsibilities Act as technical lead for substation design deliverables from 11 kV to 400 kV, including HV/EHV AIS and GIS substations. Develop and maintain project execution plans and ensure alignment with client and internal teams. Support project financial performance by meeting budget targets and adjusting constraints as needed. Produce detailed substation electrical design packages compliant with client, national, and international standards (ENA, BS, IEC, IEEE, ANSI, etc.). Develop design documentation including reports, scheme evaluations, FEED deliverables, and concept stage presentations. Review supplier designs, documentation, FAT plans, and participate in factory/site acceptance testing. Conduct technical quality assurance reviews and provide design approval/sign off for Protection & Control (P&C) and/or Primary design deliverables. Work closely with P&C, Civil/Structural, and other engineering disciplines to support multidisciplinary delivery. Contribute to tender schemes, technical options, and scope development. Preferred Skills and Professional Attributes Chartered Engineer (CEng) status or professional registration as an Incorporated Engineer (IEng) with the Engineering Council. Relevant Health & Safety qualification, such as IOSH Managing Safely, NEBOSH Certificate or Diploma, or NVQ Level 3 (or equivalent) in a Health & Safety-related discipline. Substation safety and access training, such as NSI 30, BESC: AIM, or equivalent authorizations. Formal training in CDM 2015, construction safety, and impressed voltage hazards. Strong understanding of UK Health & Safety legislation applicable to design and construction activities in the electricity supply industry. Good understanding of UK environmental and waste management legislation and associated compliance requirements Must be eligible to work within the UK without sponsorship and willing to commute or relocate to Manchester. In addition to the below, you will become part of our growing global team, you will find yourself working with world class professionals and clients in a global market. 25 days leave (plus bank holidays) Option to buy more holiday Up to 12 days smart working per month (post probation period) Support of Military Reservists - 10 additional paid days Healthcare cover (Family can be added at an additional cost) Life Assurance Professional development to become chartered Pay for professional membership Cycle to work scheme Generous recruitment referral bonus 4 half days paid leave for STEM Ambassadors
May 05, 2026
Full time
Select how often (in days) to receive an alert: Posting Date: 20 Mar 2026 City: Manchester Location: Manchester, GB, M1 3LD Contract Type: Permanent Division: Power Engineering and Renewables Level of experience: Senior RINA is currently recruiting for a Power Systems Principal Consultant to join its office in Manchester. Why RINA? RINA is a global engineering and consulting company providing technical advisory, assurance, testing, inspection, and certification services across energy and infrastructure markets. With more than 150 years of engineering heritage and a global network of professionals operating in over 70 countries, RINA delivers innovative, safe, and sustainable solutions across the full project lifecycle. Our UK operations trace their origins to 1920 through the British Electrical and Allied Industries Research Association and continue to support complex electrical and infrastructure projects across multiple sectors. The Role This is a hybrid role: you will both manage the established Power Systems Engineering team and be the technical lead for Substation design and construction projects, the focus being electro mechanical engineering, to deliver a wide range of local and international projects for commercial, industrial and utility clients. Technical Responsibilities Act as technical lead for substation design deliverables from 11 kV to 400 kV, including HV/EHV AIS and GIS substations. Develop and maintain project execution plans and ensure alignment with client and internal teams. Support project financial performance by meeting budget targets and adjusting constraints as needed. Produce detailed substation electrical design packages compliant with client, national, and international standards (ENA, BS, IEC, IEEE, ANSI, etc.). Develop design documentation including reports, scheme evaluations, FEED deliverables, and concept stage presentations. Review supplier designs, documentation, FAT plans, and participate in factory/site acceptance testing. Conduct technical quality assurance reviews and provide design approval/sign off for Protection & Control (P&C) and/or Primary design deliverables. Work closely with P&C, Civil/Structural, and other engineering disciplines to support multidisciplinary delivery. Contribute to tender schemes, technical options, and scope development. Preferred Skills and Professional Attributes Chartered Engineer (CEng) status or professional registration as an Incorporated Engineer (IEng) with the Engineering Council. Relevant Health & Safety qualification, such as IOSH Managing Safely, NEBOSH Certificate or Diploma, or NVQ Level 3 (or equivalent) in a Health & Safety-related discipline. Substation safety and access training, such as NSI 30, BESC: AIM, or equivalent authorizations. Formal training in CDM 2015, construction safety, and impressed voltage hazards. Strong understanding of UK Health & Safety legislation applicable to design and construction activities in the electricity supply industry. Good understanding of UK environmental and waste management legislation and associated compliance requirements Must be eligible to work within the UK without sponsorship and willing to commute or relocate to Manchester. In addition to the below, you will become part of our growing global team, you will find yourself working with world class professionals and clients in a global market. 25 days leave (plus bank holidays) Option to buy more holiday Up to 12 days smart working per month (post probation period) Support of Military Reservists - 10 additional paid days Healthcare cover (Family can be added at an additional cost) Life Assurance Professional development to become chartered Pay for professional membership Cycle to work scheme Generous recruitment referral bonus 4 half days paid leave for STEM Ambassadors
Design Manager Required - West London Office - Projects across London - Hybrid - 2/3 days from home - 350 - 600 a day Key requirement for this role is strong experience with the Building Safety Regulator (BSR) and the Gateway process. We are currently seeking an experienced Design Manager to lead the technical and design coordination for a complex High-Risk Building residential scheme in South West London. The successful candidate will have strong experience delivering multi-storey residential developments, along with a solid understanding of the Building Safety Act, including the gateway process, duty holder responsibilities and safety case requirements. This role will play a key part in delivering a major London regeneration project, working closely with internal technical teams, external consultants and stakeholders to ensure fully compliant, high-quality design delivery. Key Responsibilities - Lead the coordination, review and approval of architectural, structural and MEP design packages. -Manage design delivery across all RIBA stages , ensuring alignment with programme and construction sequencing. - Chair design team meetings, track design actions and maintain clear communication between consultants, subcontractors and internal project teams. - Coordinate design information to support buildability, logistics, quality benchmarks and high-rise construction sequencing. Building Safety Act & HRB Compliance - Ensure all design information complies with the Building Safety Act, including Gateways 2 and 3, duty holder obligations and the Golden Thread of information. -Oversee the preparation and coordination of documentation for the Safety Case, Fire & Emergency File, digital records and change control procedures. -Liaise with Principal Designer (CDM and Building Regulations), Building Control, Fire Engineers and Safety Consultants to ensure compliance throughout the project lifecycle. -Identify and manage design risks, ensuring mitigation strategies meet HRB regulatory standards. Technical Oversight & Quality Assurance -Review and approve technical drawings, subcontractor designs, specifications and calculations. -Ensure compliance with UK Building Regulations, Approved Documents, warranty provider requirements and planning conditions. -Support the development and management of the Design Delivery Programme (DDP) in line with the overall project programme. - Manage technical queries and RFIs from site, ensuring timely resolution. Project Delivery Support -Provide technical leadership during procurement, including subcontractor tender reviews, technical assessments and scope definition. - Coordinate the issue of construction information so site teams are working from the latest design packages. - Support client meetings, progress reporting and technical presentations where required. Experience & Skills Required Proven experience as a Design Manager (or Senior Design Coordinator ready to step up) within a main contractor or developer environment delivering HRB residential projects. Strong working knowledge of the Building Safety Act, including Gateway submissions and Golden Thread requirements. Experience coordinating multi-disciplinary design teams on medium to high-rise residential developments. Ability to interpret complex technical drawings across architecture, structural, MEP and fire engineering disciplines. Strong understanding of construction methodology, fa ade systems, fire compliance and building regulations. Excellent communication, organisation and problem-solving skills. Desirable Experience on London regeneration or mixed-use schemes. Familiarity with digital information management systems such as Procore. Relevant professional membership (RIBA, CIAT, CIOB or similar).
May 05, 2026
Full time
Design Manager Required - West London Office - Projects across London - Hybrid - 2/3 days from home - 350 - 600 a day Key requirement for this role is strong experience with the Building Safety Regulator (BSR) and the Gateway process. We are currently seeking an experienced Design Manager to lead the technical and design coordination for a complex High-Risk Building residential scheme in South West London. The successful candidate will have strong experience delivering multi-storey residential developments, along with a solid understanding of the Building Safety Act, including the gateway process, duty holder responsibilities and safety case requirements. This role will play a key part in delivering a major London regeneration project, working closely with internal technical teams, external consultants and stakeholders to ensure fully compliant, high-quality design delivery. Key Responsibilities - Lead the coordination, review and approval of architectural, structural and MEP design packages. -Manage design delivery across all RIBA stages , ensuring alignment with programme and construction sequencing. - Chair design team meetings, track design actions and maintain clear communication between consultants, subcontractors and internal project teams. - Coordinate design information to support buildability, logistics, quality benchmarks and high-rise construction sequencing. Building Safety Act & HRB Compliance - Ensure all design information complies with the Building Safety Act, including Gateways 2 and 3, duty holder obligations and the Golden Thread of information. -Oversee the preparation and coordination of documentation for the Safety Case, Fire & Emergency File, digital records and change control procedures. -Liaise with Principal Designer (CDM and Building Regulations), Building Control, Fire Engineers and Safety Consultants to ensure compliance throughout the project lifecycle. -Identify and manage design risks, ensuring mitigation strategies meet HRB regulatory standards. Technical Oversight & Quality Assurance -Review and approve technical drawings, subcontractor designs, specifications and calculations. -Ensure compliance with UK Building Regulations, Approved Documents, warranty provider requirements and planning conditions. -Support the development and management of the Design Delivery Programme (DDP) in line with the overall project programme. - Manage technical queries and RFIs from site, ensuring timely resolution. Project Delivery Support -Provide technical leadership during procurement, including subcontractor tender reviews, technical assessments and scope definition. - Coordinate the issue of construction information so site teams are working from the latest design packages. - Support client meetings, progress reporting and technical presentations where required. Experience & Skills Required Proven experience as a Design Manager (or Senior Design Coordinator ready to step up) within a main contractor or developer environment delivering HRB residential projects. Strong working knowledge of the Building Safety Act, including Gateway submissions and Golden Thread requirements. Experience coordinating multi-disciplinary design teams on medium to high-rise residential developments. Ability to interpret complex technical drawings across architecture, structural, MEP and fire engineering disciplines. Strong understanding of construction methodology, fa ade systems, fire compliance and building regulations. Excellent communication, organisation and problem-solving skills. Desirable Experience on London regeneration or mixed-use schemes. Familiarity with digital information management systems such as Procore. Relevant professional membership (RIBA, CIAT, CIOB or similar).
Job Title: Senior Engineer - Metrology (Instrumentation Calibration) Location: Barrow-in-Furness - Primarily on site with potentially 1 day per week WFH. We offer a range of hybrid and flexible working arrangements - please speak to your recruiter about the options for this particular role Salary: Circa £48,000 Who we are: Join BAE Systems and you'll be part of something bigger. As a valued member of our global colleague network, you'll bring your unique skills and perspectives to help pioneer progress and protect what matters most. You'll be trusted to play your part in delivering the advanced, technology-led defence, aerospace and security solutions of tomorrow, shaping a safer future, for all of us. From the depths of the ocean, to the far reaches of space, there's no limit to where a career at BAE Systems could take you. Job Description: As a Senior Engineer - Metrology (Instrumentation), you will support senior and principal engineers, as well as external specialists, in the development of testing regimes and verification activities for electronic systems. The role involves working closely with customers to develop and clarify requirements, designing and delivering instrumentation solutions, and carrying out testing activities. You will perform data analysis and produce technical reports that support system verification, qualification, and lifecycle management . Core duties: Engage with internal customers to capture and deliver clear requirements Install bespoke instrumentation across site to meet customer needs Fault find and maintain legacy equipment Work with supply chain and suppliers to deliver fit for purpose equipment Support factory acceptance tests and submarine trials, analysing results as required Undertake peer review, verification, and assurance activities Produce lifecycle management (LCM) documentation and safety/qualification evidence Coach and mentor early career colleagues Essential Skills: Minimum HNC or Degree in Electronic or Electrical Engineering with good knowledge of Electrical and Electronic Principles Proficient in trouble shooting and repairing Complex instrumentation Systems Experience & working knowledge of project lifecycle Ability to read and Interpret technical/schematic drawings Demonstrable experience of defining and conducting test procedures The Instrumentation Development Services (IDS) team: You will join a team of around 20 specialists supporting the Dreadnought programme. The team develops customer requirements, delivers bespoke instrumentation and works closely with Radiation Protection and Shielding across the Barrow-in-Furness site. We offer relocation support packages across all Submarines roles, subject to meeting eligibility criteria. Why BAE Systems? Here you'll build a career with purpose and limitless possibilities. With lifelong learning and meaningful work, this is a place where you can grow your career with confidence and be empowered to be your best. You'll be recognised for your contribution and enjoy rewards tailored to what's most important to you and your family, support for your financial and personal wellbeing, as well as a balanced lifestyle. In an environment embracing sustainable ways of working and with a strong sense of shared purpose, our supportive culture is a place you can feel you belong and proud of the difference you make. A place where everyone can thrive: We're committed to building an inclusive workplace where everyone feels valued and supported. We know that a diversity of backgrounds, perspectives and experiences strengthens our teams and is vital to the work we do. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date: 15th May 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role. Therefore, if you are interested, please submit your application as early as possible.
May 04, 2026
Full time
Job Title: Senior Engineer - Metrology (Instrumentation Calibration) Location: Barrow-in-Furness - Primarily on site with potentially 1 day per week WFH. We offer a range of hybrid and flexible working arrangements - please speak to your recruiter about the options for this particular role Salary: Circa £48,000 Who we are: Join BAE Systems and you'll be part of something bigger. As a valued member of our global colleague network, you'll bring your unique skills and perspectives to help pioneer progress and protect what matters most. You'll be trusted to play your part in delivering the advanced, technology-led defence, aerospace and security solutions of tomorrow, shaping a safer future, for all of us. From the depths of the ocean, to the far reaches of space, there's no limit to where a career at BAE Systems could take you. Job Description: As a Senior Engineer - Metrology (Instrumentation), you will support senior and principal engineers, as well as external specialists, in the development of testing regimes and verification activities for electronic systems. The role involves working closely with customers to develop and clarify requirements, designing and delivering instrumentation solutions, and carrying out testing activities. You will perform data analysis and produce technical reports that support system verification, qualification, and lifecycle management . Core duties: Engage with internal customers to capture and deliver clear requirements Install bespoke instrumentation across site to meet customer needs Fault find and maintain legacy equipment Work with supply chain and suppliers to deliver fit for purpose equipment Support factory acceptance tests and submarine trials, analysing results as required Undertake peer review, verification, and assurance activities Produce lifecycle management (LCM) documentation and safety/qualification evidence Coach and mentor early career colleagues Essential Skills: Minimum HNC or Degree in Electronic or Electrical Engineering with good knowledge of Electrical and Electronic Principles Proficient in trouble shooting and repairing Complex instrumentation Systems Experience & working knowledge of project lifecycle Ability to read and Interpret technical/schematic drawings Demonstrable experience of defining and conducting test procedures The Instrumentation Development Services (IDS) team: You will join a team of around 20 specialists supporting the Dreadnought programme. The team develops customer requirements, delivers bespoke instrumentation and works closely with Radiation Protection and Shielding across the Barrow-in-Furness site. We offer relocation support packages across all Submarines roles, subject to meeting eligibility criteria. Why BAE Systems? Here you'll build a career with purpose and limitless possibilities. With lifelong learning and meaningful work, this is a place where you can grow your career with confidence and be empowered to be your best. You'll be recognised for your contribution and enjoy rewards tailored to what's most important to you and your family, support for your financial and personal wellbeing, as well as a balanced lifestyle. In an environment embracing sustainable ways of working and with a strong sense of shared purpose, our supportive culture is a place you can feel you belong and proud of the difference you make. A place where everyone can thrive: We're committed to building an inclusive workplace where everyone feels valued and supported. We know that a diversity of backgrounds, perspectives and experiences strengthens our teams and is vital to the work we do. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date: 15th May 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role. Therefore, if you are interested, please submit your application as early as possible.
Overview Shape the future of our cities and environments. You might know us for the great work we do across our wide variety of projects. We're proud to say it's thanks to our people's diversity of thought, expertise and knowledge. And when you join us, you'll be a part of this genuinely collaborative environment, where everyone's voice is valued and treated equally. We're passionate about what we do, but we don't take ourselves too seriously. Simply put, this a great place to be. So, when it comes to your life outside of work, ask us about our flexible and remote working policies designed to help you get the most out of life. Our ecology team truly strives to make a positive difference to the natural environment, by working closely with other disciplines across our business to engage in projects from the outset, ensuring ecology is considered at the earliest possible stage. This collaborative working helps to drive forward nature positive schemes that we are proud of. Our award winning team of over 130 ecologists (including the President of the Chartered Institute of Ecology and Environmental Management (CIEEM) and three CIEEM Fellows) work across a range of exciting habitat creation, research, development and major infrastructure projects; we also design new innovations and help inform policy. At AtkinsRéalis our people are the foundation of our business and that's why we put our people first. With this in mind, we provide an incredibly flexible and inclusive working environment with staff wellbeing being front and centre of all our decisions. We also understand that not everyone chooses to take the university route in terms of education - we are open to taking on ecologists without a degree and we are working closely with the Chartered Institute of Ecology and Environmental Management (CIEEM) to make entry into the environmental industry more inclusive for all. For us, it is the experience, knowledge and, above all, your ability to fit in well with our existing team of ecologists, that really matters. Your role Working individually but also, collaboratively, in a team environment. Undertaking ecological assessment and habitat design for a variety of development and nature recovery projects. Developing innovative and pragmatic approaches to ecological mitigation and compensation. Collaborating within multi disciplinary teams and engaging with stakeholders / clients. Delivering clear and concise, high quality ecological deliverables in line with current guidance and good practice. Quality assurance of ecological deliverables. Acting as ecology lead on projects. Task / project management. Mentoring of staff, Line Management. About you A passion for ecology. A good working knowledge of the natural environment and wildlife legislation. The ability to undertake UKHab surveys, Preliminary Ecological Assessment, Ecological Impact Assessment, Habitats Regulations Assessment and Biodiversity Net Gain assessments. Good report writing skills. Strong botanical skills, including Field Identification Skills Certificate (FISC) level 3+, or demonstrable botanical ability matching this level. Experience in protected species survey, mitigation and licensing. An understanding of the importance of work winning, through both bidding and maintaining strong client relationships. The ability to manage ecology deliverables / projects from bidding through to completion. Membership of CIEEM or equivalent and Chartership (CEnv or CEcol) or the current ability to achieve chartership. Full driving licence. Reward & benefits Explore the rewards and benefits that help you thrive - at every stage of your life and your career. Enjoy competitive salaries, employee rewards and a brilliant range of benefits you can tailor to suit your own health, wellbeing, financial and lifestyle choices. Make the most of a myriad of opportunities for training and professional development to grow your skills and expertise. And combine our hybrid working culture and flexible holiday allowances to balance a great job and fulfilling personal life. About AtkinsRéalis We're AtkinsRéalis, a world-class engineering services and nuclear organization. We connect people, data and technology to transform the world's'infrastructure and energy systems. Together, with our industry partners and clients, and our global team of consultants, designers, engineers and project managers, we can change the world. We're committed to leading our clients across our various end markets to engineer a better future for our planet and its people. Additional information Security clearance This role may require security clearance and offers of employment will be dependent on obtaining the relevant level of clearance. If this is necessary, it will be discussed with you at interview. The vetting process is delivered by United Kingdom Security Vetting (UKSV) and may require candidates to provide proof of residency in the UK of 5 years or longer. If applying to this role please do not make reference to (in conversation) or include in your application or CV, details of any current or previously held security clearance. We are committed to creating a culture where everyone feels that they belong - a place where we can all be ourselves, thrive and develop to be the best we can be. So, we offer a range of family friendly, inclusive employment policies, flexible working arrangements and employee resource groups to support all employees. As an Equal Opportunities Employer, we value applications from all backgrounds, cultures and ability.
May 03, 2026
Full time
Overview Shape the future of our cities and environments. You might know us for the great work we do across our wide variety of projects. We're proud to say it's thanks to our people's diversity of thought, expertise and knowledge. And when you join us, you'll be a part of this genuinely collaborative environment, where everyone's voice is valued and treated equally. We're passionate about what we do, but we don't take ourselves too seriously. Simply put, this a great place to be. So, when it comes to your life outside of work, ask us about our flexible and remote working policies designed to help you get the most out of life. Our ecology team truly strives to make a positive difference to the natural environment, by working closely with other disciplines across our business to engage in projects from the outset, ensuring ecology is considered at the earliest possible stage. This collaborative working helps to drive forward nature positive schemes that we are proud of. Our award winning team of over 130 ecologists (including the President of the Chartered Institute of Ecology and Environmental Management (CIEEM) and three CIEEM Fellows) work across a range of exciting habitat creation, research, development and major infrastructure projects; we also design new innovations and help inform policy. At AtkinsRéalis our people are the foundation of our business and that's why we put our people first. With this in mind, we provide an incredibly flexible and inclusive working environment with staff wellbeing being front and centre of all our decisions. We also understand that not everyone chooses to take the university route in terms of education - we are open to taking on ecologists without a degree and we are working closely with the Chartered Institute of Ecology and Environmental Management (CIEEM) to make entry into the environmental industry more inclusive for all. For us, it is the experience, knowledge and, above all, your ability to fit in well with our existing team of ecologists, that really matters. Your role Working individually but also, collaboratively, in a team environment. Undertaking ecological assessment and habitat design for a variety of development and nature recovery projects. Developing innovative and pragmatic approaches to ecological mitigation and compensation. Collaborating within multi disciplinary teams and engaging with stakeholders / clients. Delivering clear and concise, high quality ecological deliverables in line with current guidance and good practice. Quality assurance of ecological deliverables. Acting as ecology lead on projects. Task / project management. Mentoring of staff, Line Management. About you A passion for ecology. A good working knowledge of the natural environment and wildlife legislation. The ability to undertake UKHab surveys, Preliminary Ecological Assessment, Ecological Impact Assessment, Habitats Regulations Assessment and Biodiversity Net Gain assessments. Good report writing skills. Strong botanical skills, including Field Identification Skills Certificate (FISC) level 3+, or demonstrable botanical ability matching this level. Experience in protected species survey, mitigation and licensing. An understanding of the importance of work winning, through both bidding and maintaining strong client relationships. The ability to manage ecology deliverables / projects from bidding through to completion. Membership of CIEEM or equivalent and Chartership (CEnv or CEcol) or the current ability to achieve chartership. Full driving licence. Reward & benefits Explore the rewards and benefits that help you thrive - at every stage of your life and your career. Enjoy competitive salaries, employee rewards and a brilliant range of benefits you can tailor to suit your own health, wellbeing, financial and lifestyle choices. Make the most of a myriad of opportunities for training and professional development to grow your skills and expertise. And combine our hybrid working culture and flexible holiday allowances to balance a great job and fulfilling personal life. About AtkinsRéalis We're AtkinsRéalis, a world-class engineering services and nuclear organization. We connect people, data and technology to transform the world's'infrastructure and energy systems. Together, with our industry partners and clients, and our global team of consultants, designers, engineers and project managers, we can change the world. We're committed to leading our clients across our various end markets to engineer a better future for our planet and its people. Additional information Security clearance This role may require security clearance and offers of employment will be dependent on obtaining the relevant level of clearance. If this is necessary, it will be discussed with you at interview. The vetting process is delivered by United Kingdom Security Vetting (UKSV) and may require candidates to provide proof of residency in the UK of 5 years or longer. If applying to this role please do not make reference to (in conversation) or include in your application or CV, details of any current or previously held security clearance. We are committed to creating a culture where everyone feels that they belong - a place where we can all be ourselves, thrive and develop to be the best we can be. So, we offer a range of family friendly, inclusive employment policies, flexible working arrangements and employee resource groups to support all employees. As an Equal Opportunities Employer, we value applications from all backgrounds, cultures and ability.
Job Title: Senior Engineer - Metrology (Instrumentation Calibration) Location: Barrow-in-Furness - Primarily on site with potentially 1 day per week WFH. We offer a range of hybrid and flexible working arrangements - please speak to your recruiter about the options for this particular role Salary: Circa £48,000 Who we are: Join BAE Systems and you'll be part of something bigger. As a valued member of our global colleague network, you'll bring your unique skills and perspectives to help pioneer progress and protect what matters most. You'll be trusted to play your part in delivering the advanced, technology-led defence, aerospace and security solutions of tomorrow, shaping a safer future, for all of us. From the depths of the ocean, to the far reaches of space, there's no limit to where a career at BAE Systems could take you. Job Description: As a Senior Engineer - Metrology (Instrumentation), you will support senior and principal engineers, as well as external specialists, in the development of testing regimes and verification activities for electronic systems. The role involves working closely with customers to develop and clarify requirements, designing and delivering instrumentation solutions, and carrying out testing activities. You will perform data analysis and produce technical reports that support system verification, qualification, and lifecycle management . Core duties: Engage with internal customers to capture and deliver clear requirements Install bespoke instrumentation across site to meet customer needs Fault find and maintain legacy equipment Work with supply chain and suppliers to deliver fit for purpose equipment Support factory acceptance tests and submarine trials, analysing results as required Undertake peer review, verification, and assurance activities Produce lifecycle management (LCM) documentation and safety/qualification evidence Coach and mentor early career colleagues Essential Skills: Minimum HNC or Degree in Electronic or Electrical Engineering with good knowledge of Electrical and Electronic Principles Proficient in trouble shooting and repairing Complex instrumentation Systems Experience & working knowledge of project lifecycle Ability to read and Interpret technical/schematic drawings Demonstrable experience of defining and conducting test procedures The Instrumentation Development Services (IDS) team: You will join a team of around 20 specialists supporting the Dreadnought programme. The team develops customer requirements, delivers bespoke instrumentation and works closely with Radiation Protection and Shielding across the Barrow-in-Furness site. We offer relocation support packages across all Submarines roles, subject to meeting eligibility criteria. Why BAE Systems? Here you'll build a career with purpose and limitless possibilities. With lifelong learning and meaningful work, this is a place where you can grow your career with confidence and be empowered to be your best. You'll be recognised for your contribution and enjoy rewards tailored to what's most important to you and your family, support for your financial and personal wellbeing, as well as a balanced lifestyle. In an environment embracing sustainable ways of working and with a strong sense of shared purpose, our supportive culture is a place you can feel you belong and proud of the difference you make. A place where everyone can thrive: We're committed to building an inclusive workplace where everyone feels valued and supported. We know that a diversity of backgrounds, perspectives and experiences strengthens our teams and is vital to the work we do. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date: 15th May 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role. Therefore, if you are interested, please submit your application as early as possible.
May 03, 2026
Full time
Job Title: Senior Engineer - Metrology (Instrumentation Calibration) Location: Barrow-in-Furness - Primarily on site with potentially 1 day per week WFH. We offer a range of hybrid and flexible working arrangements - please speak to your recruiter about the options for this particular role Salary: Circa £48,000 Who we are: Join BAE Systems and you'll be part of something bigger. As a valued member of our global colleague network, you'll bring your unique skills and perspectives to help pioneer progress and protect what matters most. You'll be trusted to play your part in delivering the advanced, technology-led defence, aerospace and security solutions of tomorrow, shaping a safer future, for all of us. From the depths of the ocean, to the far reaches of space, there's no limit to where a career at BAE Systems could take you. Job Description: As a Senior Engineer - Metrology (Instrumentation), you will support senior and principal engineers, as well as external specialists, in the development of testing regimes and verification activities for electronic systems. The role involves working closely with customers to develop and clarify requirements, designing and delivering instrumentation solutions, and carrying out testing activities. You will perform data analysis and produce technical reports that support system verification, qualification, and lifecycle management . Core duties: Engage with internal customers to capture and deliver clear requirements Install bespoke instrumentation across site to meet customer needs Fault find and maintain legacy equipment Work with supply chain and suppliers to deliver fit for purpose equipment Support factory acceptance tests and submarine trials, analysing results as required Undertake peer review, verification, and assurance activities Produce lifecycle management (LCM) documentation and safety/qualification evidence Coach and mentor early career colleagues Essential Skills: Minimum HNC or Degree in Electronic or Electrical Engineering with good knowledge of Electrical and Electronic Principles Proficient in trouble shooting and repairing Complex instrumentation Systems Experience & working knowledge of project lifecycle Ability to read and Interpret technical/schematic drawings Demonstrable experience of defining and conducting test procedures The Instrumentation Development Services (IDS) team: You will join a team of around 20 specialists supporting the Dreadnought programme. The team develops customer requirements, delivers bespoke instrumentation and works closely with Radiation Protection and Shielding across the Barrow-in-Furness site. We offer relocation support packages across all Submarines roles, subject to meeting eligibility criteria. Why BAE Systems? Here you'll build a career with purpose and limitless possibilities. With lifelong learning and meaningful work, this is a place where you can grow your career with confidence and be empowered to be your best. You'll be recognised for your contribution and enjoy rewards tailored to what's most important to you and your family, support for your financial and personal wellbeing, as well as a balanced lifestyle. In an environment embracing sustainable ways of working and with a strong sense of shared purpose, our supportive culture is a place you can feel you belong and proud of the difference you make. A place where everyone can thrive: We're committed to building an inclusive workplace where everyone feels valued and supported. We know that a diversity of backgrounds, perspectives and experiences strengthens our teams and is vital to the work we do. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date: 15th May 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role. Therefore, if you are interested, please submit your application as early as possible.
Job Title: Senior Engineer - Metrology (Instrumentation Calibration) Location: Barrow-in-Furness - Primarily on site with potentially 1 day per week WFH. We offer a range of hybrid and flexible working arrangements - please speak to your recruiter about the options for this particular role Salary: Circa £48,000 Who we are: Join BAE Systems and you'll be part of something bigger. As a valued member of our global colleague network, you'll bring your unique skills and perspectives to help pioneer progress and protect what matters most. You'll be trusted to play your part in delivering the advanced, technology-led defence, aerospace and security solutions of tomorrow, shaping a safer future, for all of us. From the depths of the ocean, to the far reaches of space, there's no limit to where a career at BAE Systems could take you. Job Description: As a Senior Engineer - Metrology (Instrumentation), you will support senior and principal engineers, as well as external specialists, in the development of testing regimes and verification activities for electronic systems. The role involves working closely with customers to develop and clarify requirements, designing and delivering instrumentation solutions, and carrying out testing activities. You will perform data analysis and produce technical reports that support system verification, qualification, and lifecycle management . Core duties: Engage with internal customers to capture and deliver clear requirements Install bespoke instrumentation across site to meet customer needs Fault find and maintain legacy equipment Work with supply chain and suppliers to deliver fit for purpose equipment Support factory acceptance tests and submarine trials, analysing results as required Undertake peer review, verification, and assurance activities Produce lifecycle management (LCM) documentation and safety/qualification evidence Coach and mentor early career colleagues Essential Skills: Minimum HNC or Degree in Electronic or Electrical Engineering with good knowledge of Electrical and Electronic Principles Proficient in trouble shooting and repairing Complex instrumentation Systems Experience & working knowledge of project lifecycle Ability to read and Interpret technical/schematic drawings Demonstrable experience of defining and conducting test procedures The Instrumentation Development Services (IDS) team: You will join a team of around 20 specialists supporting the Dreadnought programme. The team develops customer requirements, delivers bespoke instrumentation and works closely with Radiation Protection and Shielding across the Barrow-in-Furness site. We offer relocation support packages across all Submarines roles, subject to meeting eligibility criteria. Why BAE Systems? Here you'll build a career with purpose and limitless possibilities. With lifelong learning and meaningful work, this is a place where you can grow your career with confidence and be empowered to be your best. You'll be recognised for your contribution and enjoy rewards tailored to what's most important to you and your family, support for your financial and personal wellbeing, as well as a balanced lifestyle. In an environment embracing sustainable ways of working and with a strong sense of shared purpose, our supportive culture is a place you can feel you belong and proud of the difference you make. A place where everyone can thrive: We're committed to building an inclusive workplace where everyone feels valued and supported. We know that a diversity of backgrounds, perspectives and experiences strengthens our teams and is vital to the work we do. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date: 15th May 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role. Therefore, if you are interested, please submit your application as early as possible.
May 02, 2026
Full time
Job Title: Senior Engineer - Metrology (Instrumentation Calibration) Location: Barrow-in-Furness - Primarily on site with potentially 1 day per week WFH. We offer a range of hybrid and flexible working arrangements - please speak to your recruiter about the options for this particular role Salary: Circa £48,000 Who we are: Join BAE Systems and you'll be part of something bigger. As a valued member of our global colleague network, you'll bring your unique skills and perspectives to help pioneer progress and protect what matters most. You'll be trusted to play your part in delivering the advanced, technology-led defence, aerospace and security solutions of tomorrow, shaping a safer future, for all of us. From the depths of the ocean, to the far reaches of space, there's no limit to where a career at BAE Systems could take you. Job Description: As a Senior Engineer - Metrology (Instrumentation), you will support senior and principal engineers, as well as external specialists, in the development of testing regimes and verification activities for electronic systems. The role involves working closely with customers to develop and clarify requirements, designing and delivering instrumentation solutions, and carrying out testing activities. You will perform data analysis and produce technical reports that support system verification, qualification, and lifecycle management . Core duties: Engage with internal customers to capture and deliver clear requirements Install bespoke instrumentation across site to meet customer needs Fault find and maintain legacy equipment Work with supply chain and suppliers to deliver fit for purpose equipment Support factory acceptance tests and submarine trials, analysing results as required Undertake peer review, verification, and assurance activities Produce lifecycle management (LCM) documentation and safety/qualification evidence Coach and mentor early career colleagues Essential Skills: Minimum HNC or Degree in Electronic or Electrical Engineering with good knowledge of Electrical and Electronic Principles Proficient in trouble shooting and repairing Complex instrumentation Systems Experience & working knowledge of project lifecycle Ability to read and Interpret technical/schematic drawings Demonstrable experience of defining and conducting test procedures The Instrumentation Development Services (IDS) team: You will join a team of around 20 specialists supporting the Dreadnought programme. The team develops customer requirements, delivers bespoke instrumentation and works closely with Radiation Protection and Shielding across the Barrow-in-Furness site. We offer relocation support packages across all Submarines roles, subject to meeting eligibility criteria. Why BAE Systems? Here you'll build a career with purpose and limitless possibilities. With lifelong learning and meaningful work, this is a place where you can grow your career with confidence and be empowered to be your best. You'll be recognised for your contribution and enjoy rewards tailored to what's most important to you and your family, support for your financial and personal wellbeing, as well as a balanced lifestyle. In an environment embracing sustainable ways of working and with a strong sense of shared purpose, our supportive culture is a place you can feel you belong and proud of the difference you make. A place where everyone can thrive: We're committed to building an inclusive workplace where everyone feels valued and supported. We know that a diversity of backgrounds, perspectives and experiences strengthens our teams and is vital to the work we do. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date: 15th May 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role. Therefore, if you are interested, please submit your application as early as possible.
Salary: £74,126 - £92,658 FTE DOE+ Benefits + Bonus Location: Newingreen, Kent Fully office based We care deeply about inclusive working practices and diverse teams. If you'd prefer to work full time, part time or as a job share, we'll facilitate this wherever we can - whether to help you meet other commitments or to help you strike a great work life balance. About At Holiday Extras, we're creating a workplace where everyone can thrive, build their careers and reach their limitless potential. As a Sunday Times Best Place to Work 2025, we're proud to offer a world of benefits designed to enhance your lifestyle and well being. By joining our team, you'll feel supported and rewarded every day. We create seamless digital experiences that help travellers make the most of their trips. From the moment they book to the moment they fly, we remove hassle so they can focus on what really matters - their holiday. Payments are a critical part of that journey. We're dedicated to building a frictionless, reliable checkout experience using Node.js and TypeScript at its core. In 2025 we made significant strides in our payment platform - including introducing alternative payment methods - and we're continuing to evolve our architecture for scalability, reliability, and compliance. We're also going all in on AI. We believe it will fundamentally change how we build and operate our products, and we're investing across the business to make it a core part of how we deliver for customers. In this role, you'll be encouraged to champion AI assisted tooling and automation within your team - finding smart, pragmatic ways to raise the quality and pace of what you ship. The Role This is a hands on technical leadership role with line management responsibility for a small team of engineers. You'll combine deep backend expertise with the ability to develop, support, and grow the people around you - setting a high bar for quality while creating the conditions for your team to thrive. You'll be leading a small, talented team of full stack engineers, many of whom have a strong frontend background. As AI reshapes how we build, we're deliberately pivoting towards deeper backend capability - and a meaningful part of this role is guiding that shift. That means upskilling the team, setting the technical standard, and creating an environment where engineers are genuinely excited to grow. By joining our team, you will: Lead and line manage a small team of engineers, owning their development, wellbeing, and performance. Define and champion best practices for Node.js and TypeScript backend development within the Payments team. Set the technical direction for our payment platform, making sound architectural decisions that balance innovation with pragmatism. Be the go to expert for complex payment problems - from integration challenges to compliance requirements like PCI DSS and Payment Services Directives. Collaborate closely with Product, Delivery, Finance, Fraud, and Data teams, as well as third party Payment Service Providers. Drive a culture of technical excellence, coaching engineers and fostering professional growth through mentorship and feedback. Champion AI tools and automation to increase team productivity and code quality - identifying where they can genuinely add value. Keep pace with the evolving payments landscape, surfacing opportunities and risks for the business. Represent your team's work in regular stakeholder demos and updates. Balance delivery pace with long term sustainability, managing technical debt strategically. Dedicate 10% of your time to your own learning and development. What You Can Bring to Our Team Substantial experience in backend development, with expertise in building scalable, reliable, and secure systems using Node.js and TypeScript. Experience leading and line managing engineers - you understand what it means to be accountable for someone's development and career progression. A track record of technical mentorship and helping engineers grow through feedback, pairing, and coaching. Strong knowledge of payment systems, including PSPs, alternative payment methods, PCI DSS, and Payment Services Directives. An outcome driven mindset - you can articulate how your work has improved key metrics for payment platforms. A pragmatic approach to technical decisions, balancing innovation with the need to keep things moving. Strong communication skills, with the ability to adapt your style for technical and non technical audiences alike. Experience managing stakeholders across a range of teams and disciplines. A proactive attitude to identifying new opportunities and technologies that can enhance the platform. A genuine passion for sharing knowledge - internally through your team, and externally in the wider engineering community. Openness to adopting AI tools and practices where they add real value to how your team works. Everyone's career path is individual and different, so this is just a guide. If your experience doesn't precisely match this, you're encouraged to apply so we can discover your unique talents! How We Hire for This Role We know your time is precious, so we keep our recruitment process as straightforward as possible. If we think you could be a match, you'll move through these stages: Initial conversation with our Recruitment Lead - a chance to learn more about the role and tell us about yourself. On site interview with our Principal Engineers and Solution Architects, including a technical discussion and problem solving exercise. Meet the team - an informal opportunity to spend time with the people you'd be working with and get a real feel for the culture and environment. Cultivating a diverse and inclusive culture is paramount for us. If you need us to adapt the process for any reason, please get in touch at . We reserve the right to close this role before the closing date due to high application volumes. Please apply as soon as possible to be considered. Why Choose Holiday Extras? We believe that holidays are the most precious time of all, so we create products, tech and services that make travel and holidays memorable and fun. We're on a mission to be the only place to go for your holiday extras, offering unparalleled choice, value and service, turning our customers' ordinary trips into extraordinarily good times. This role is based full time at our office in Newingreen, in the heart of the Kent countryside - just minutes from Folkestone and the M20, where face to face collaboration genuinely matters. You'll find free parking, an on site café, and a state of the art campus that makes the commute worth it. At Holiday Extras, we're creating a workplace where everyone can thrive, build their careers and reach their limitless potential. As a Sunday Times Best Place to Work 2025, we're proud to offer a world of benefits designed to enhance your lifestyle and well being. By joining our team, you'll feel supported and rewarded every day. Learn more about our culture and benefits. Time is precious: 25 days annual leave (+BH's), extra holidays through Holiday Buy, Birthday Day Off, and Sabbaticals at each milestone. Parental Leave: Enhanced parental leave - Up to 1 year off, including 13 weeks at 100% pay, 13 weeks at 50% pay Road to well being: Access to Gym Discounts, Private Dental Insurance and Private Medical Insurance (after 4 years) Celebrate success together: Enjoy a Profit Share Bonus and a pension scheme with Aviva. Good for the soul: Join our Social Club for 25 % off any ticket or event in the UK, Discounts on the latest tech, or give back to your community with our Volunteering Scheme. Plan ahead: Income protection, Critical illness cover and Life assurance
May 02, 2026
Full time
Salary: £74,126 - £92,658 FTE DOE+ Benefits + Bonus Location: Newingreen, Kent Fully office based We care deeply about inclusive working practices and diverse teams. If you'd prefer to work full time, part time or as a job share, we'll facilitate this wherever we can - whether to help you meet other commitments or to help you strike a great work life balance. About At Holiday Extras, we're creating a workplace where everyone can thrive, build their careers and reach their limitless potential. As a Sunday Times Best Place to Work 2025, we're proud to offer a world of benefits designed to enhance your lifestyle and well being. By joining our team, you'll feel supported and rewarded every day. We create seamless digital experiences that help travellers make the most of their trips. From the moment they book to the moment they fly, we remove hassle so they can focus on what really matters - their holiday. Payments are a critical part of that journey. We're dedicated to building a frictionless, reliable checkout experience using Node.js and TypeScript at its core. In 2025 we made significant strides in our payment platform - including introducing alternative payment methods - and we're continuing to evolve our architecture for scalability, reliability, and compliance. We're also going all in on AI. We believe it will fundamentally change how we build and operate our products, and we're investing across the business to make it a core part of how we deliver for customers. In this role, you'll be encouraged to champion AI assisted tooling and automation within your team - finding smart, pragmatic ways to raise the quality and pace of what you ship. The Role This is a hands on technical leadership role with line management responsibility for a small team of engineers. You'll combine deep backend expertise with the ability to develop, support, and grow the people around you - setting a high bar for quality while creating the conditions for your team to thrive. You'll be leading a small, talented team of full stack engineers, many of whom have a strong frontend background. As AI reshapes how we build, we're deliberately pivoting towards deeper backend capability - and a meaningful part of this role is guiding that shift. That means upskilling the team, setting the technical standard, and creating an environment where engineers are genuinely excited to grow. By joining our team, you will: Lead and line manage a small team of engineers, owning their development, wellbeing, and performance. Define and champion best practices for Node.js and TypeScript backend development within the Payments team. Set the technical direction for our payment platform, making sound architectural decisions that balance innovation with pragmatism. Be the go to expert for complex payment problems - from integration challenges to compliance requirements like PCI DSS and Payment Services Directives. Collaborate closely with Product, Delivery, Finance, Fraud, and Data teams, as well as third party Payment Service Providers. Drive a culture of technical excellence, coaching engineers and fostering professional growth through mentorship and feedback. Champion AI tools and automation to increase team productivity and code quality - identifying where they can genuinely add value. Keep pace with the evolving payments landscape, surfacing opportunities and risks for the business. Represent your team's work in regular stakeholder demos and updates. Balance delivery pace with long term sustainability, managing technical debt strategically. Dedicate 10% of your time to your own learning and development. What You Can Bring to Our Team Substantial experience in backend development, with expertise in building scalable, reliable, and secure systems using Node.js and TypeScript. Experience leading and line managing engineers - you understand what it means to be accountable for someone's development and career progression. A track record of technical mentorship and helping engineers grow through feedback, pairing, and coaching. Strong knowledge of payment systems, including PSPs, alternative payment methods, PCI DSS, and Payment Services Directives. An outcome driven mindset - you can articulate how your work has improved key metrics for payment platforms. A pragmatic approach to technical decisions, balancing innovation with the need to keep things moving. Strong communication skills, with the ability to adapt your style for technical and non technical audiences alike. Experience managing stakeholders across a range of teams and disciplines. A proactive attitude to identifying new opportunities and technologies that can enhance the platform. A genuine passion for sharing knowledge - internally through your team, and externally in the wider engineering community. Openness to adopting AI tools and practices where they add real value to how your team works. Everyone's career path is individual and different, so this is just a guide. If your experience doesn't precisely match this, you're encouraged to apply so we can discover your unique talents! How We Hire for This Role We know your time is precious, so we keep our recruitment process as straightforward as possible. If we think you could be a match, you'll move through these stages: Initial conversation with our Recruitment Lead - a chance to learn more about the role and tell us about yourself. On site interview with our Principal Engineers and Solution Architects, including a technical discussion and problem solving exercise. Meet the team - an informal opportunity to spend time with the people you'd be working with and get a real feel for the culture and environment. Cultivating a diverse and inclusive culture is paramount for us. If you need us to adapt the process for any reason, please get in touch at . We reserve the right to close this role before the closing date due to high application volumes. Please apply as soon as possible to be considered. Why Choose Holiday Extras? We believe that holidays are the most precious time of all, so we create products, tech and services that make travel and holidays memorable and fun. We're on a mission to be the only place to go for your holiday extras, offering unparalleled choice, value and service, turning our customers' ordinary trips into extraordinarily good times. This role is based full time at our office in Newingreen, in the heart of the Kent countryside - just minutes from Folkestone and the M20, where face to face collaboration genuinely matters. You'll find free parking, an on site café, and a state of the art campus that makes the commute worth it. At Holiday Extras, we're creating a workplace where everyone can thrive, build their careers and reach their limitless potential. As a Sunday Times Best Place to Work 2025, we're proud to offer a world of benefits designed to enhance your lifestyle and well being. By joining our team, you'll feel supported and rewarded every day. Learn more about our culture and benefits. Time is precious: 25 days annual leave (+BH's), extra holidays through Holiday Buy, Birthday Day Off, and Sabbaticals at each milestone. Parental Leave: Enhanced parental leave - Up to 1 year off, including 13 weeks at 100% pay, 13 weeks at 50% pay Road to well being: Access to Gym Discounts, Private Dental Insurance and Private Medical Insurance (after 4 years) Celebrate success together: Enjoy a Profit Share Bonus and a pension scheme with Aviva. Good for the soul: Join our Social Club for 25 % off any ticket or event in the UK, Discounts on the latest tech, or give back to your community with our Volunteering Scheme. Plan ahead: Income protection, Critical illness cover and Life assurance
Job Title: Senior Engineer - Metrology (Instrumentation Calibration) Location: Barrow-in-Furness - Primarily on site with potentially 1 day per week WFH. We offer a range of hybrid and flexible working arrangements - please speak to your recruiter about the options for this particular role Salary: Circa £48,000 Who we are: Join BAE Systems and you'll be part of something bigger. As a valued member of our global colleague network, you'll bring your unique skills and perspectives to help pioneer progress and protect what matters most. You'll be trusted to play your part in delivering the advanced, technology-led defence, aerospace and security solutions of tomorrow, shaping a safer future, for all of us. From the depths of the ocean, to the far reaches of space, there's no limit to where a career at BAE Systems could take you. Job Description: As a Senior Engineer - Metrology (Instrumentation), you will support senior and principal engineers, as well as external specialists, in the development of testing regimes and verification activities for electronic systems. The role involves working closely with customers to develop and clarify requirements, designing and delivering instrumentation solutions, and carrying out testing activities. You will perform data analysis and produce technical reports that support system verification, qualification, and lifecycle management . Core duties: Engage with internal customers to capture and deliver clear requirements Install bespoke instrumentation across site to meet customer needs Fault find and maintain legacy equipment Work with supply chain and suppliers to deliver fit for purpose equipment Support factory acceptance tests and submarine trials, analysing results as required Undertake peer review, verification, and assurance activities Produce lifecycle management (LCM) documentation and safety/qualification evidence Coach and mentor early career colleagues Essential Skills: Minimum HNC or Degree in Electronic or Electrical Engineering with good knowledge of Electrical and Electronic Principles Proficient in trouble shooting and repairing Complex instrumentation Systems Experience & working knowledge of project lifecycle Ability to read and Interpret technical/schematic drawings Demonstrable experience of defining and conducting test procedures The Instrumentation Development Services (IDS) team: You will join a team of around 20 specialists supporting the Dreadnought programme. The team develops customer requirements, delivers bespoke instrumentation and works closely with Radiation Protection and Shielding across the Barrow-in-Furness site. We offer relocation support packages across all Submarines roles, subject to meeting eligibility criteria. Why BAE Systems? Here you'll build a career with purpose and limitless possibilities. With lifelong learning and meaningful work, this is a place where you can grow your career with confidence and be empowered to be your best. You'll be recognised for your contribution and enjoy rewards tailored to what's most important to you and your family, support for your financial and personal wellbeing, as well as a balanced lifestyle. In an environment embracing sustainable ways of working and with a strong sense of shared purpose, our supportive culture is a place you can feel you belong and proud of the difference you make. A place where everyone can thrive: We're committed to building an inclusive workplace where everyone feels valued and supported. We know that a diversity of backgrounds, perspectives and experiences strengthens our teams and is vital to the work we do. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date: 15th May 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role. Therefore, if you are interested, please submit your application as early as possible.
May 02, 2026
Full time
Job Title: Senior Engineer - Metrology (Instrumentation Calibration) Location: Barrow-in-Furness - Primarily on site with potentially 1 day per week WFH. We offer a range of hybrid and flexible working arrangements - please speak to your recruiter about the options for this particular role Salary: Circa £48,000 Who we are: Join BAE Systems and you'll be part of something bigger. As a valued member of our global colleague network, you'll bring your unique skills and perspectives to help pioneer progress and protect what matters most. You'll be trusted to play your part in delivering the advanced, technology-led defence, aerospace and security solutions of tomorrow, shaping a safer future, for all of us. From the depths of the ocean, to the far reaches of space, there's no limit to where a career at BAE Systems could take you. Job Description: As a Senior Engineer - Metrology (Instrumentation), you will support senior and principal engineers, as well as external specialists, in the development of testing regimes and verification activities for electronic systems. The role involves working closely with customers to develop and clarify requirements, designing and delivering instrumentation solutions, and carrying out testing activities. You will perform data analysis and produce technical reports that support system verification, qualification, and lifecycle management . Core duties: Engage with internal customers to capture and deliver clear requirements Install bespoke instrumentation across site to meet customer needs Fault find and maintain legacy equipment Work with supply chain and suppliers to deliver fit for purpose equipment Support factory acceptance tests and submarine trials, analysing results as required Undertake peer review, verification, and assurance activities Produce lifecycle management (LCM) documentation and safety/qualification evidence Coach and mentor early career colleagues Essential Skills: Minimum HNC or Degree in Electronic or Electrical Engineering with good knowledge of Electrical and Electronic Principles Proficient in trouble shooting and repairing Complex instrumentation Systems Experience & working knowledge of project lifecycle Ability to read and Interpret technical/schematic drawings Demonstrable experience of defining and conducting test procedures The Instrumentation Development Services (IDS) team: You will join a team of around 20 specialists supporting the Dreadnought programme. The team develops customer requirements, delivers bespoke instrumentation and works closely with Radiation Protection and Shielding across the Barrow-in-Furness site. We offer relocation support packages across all Submarines roles, subject to meeting eligibility criteria. Why BAE Systems? Here you'll build a career with purpose and limitless possibilities. With lifelong learning and meaningful work, this is a place where you can grow your career with confidence and be empowered to be your best. You'll be recognised for your contribution and enjoy rewards tailored to what's most important to you and your family, support for your financial and personal wellbeing, as well as a balanced lifestyle. In an environment embracing sustainable ways of working and with a strong sense of shared purpose, our supportive culture is a place you can feel you belong and proud of the difference you make. A place where everyone can thrive: We're committed to building an inclusive workplace where everyone feels valued and supported. We know that a diversity of backgrounds, perspectives and experiences strengthens our teams and is vital to the work we do. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date: 15th May 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role. Therefore, if you are interested, please submit your application as early as possible.
Job Title: Senior Engineer - Metrology (Instrumentation Calibration) Location: Barrow-in-Furness - Primarily on site with potentially 1 day per week WFH. We offer a range of hybrid and flexible working arrangements - please speak to your recruiter about the options for this particular role Salary: Circa £48,000 Who we are: Join BAE Systems and you'll be part of something bigger. As a valued member of our global colleague network, you'll bring your unique skills and perspectives to help pioneer progress and protect what matters most. You'll be trusted to play your part in delivering the advanced, technology-led defence, aerospace and security solutions of tomorrow, shaping a safer future, for all of us. From the depths of the ocean, to the far reaches of space, there's no limit to where a career at BAE Systems could take you. Job Description: As a Senior Engineer - Metrology (Instrumentation), you will support senior and principal engineers, as well as external specialists, in the development of testing regimes and verification activities for electronic systems. The role involves working closely with customers to develop and clarify requirements, designing and delivering instrumentation solutions, and carrying out testing activities. You will perform data analysis and produce technical reports that support system verification, qualification, and lifecycle management . Core duties: Engage with internal customers to capture and deliver clear requirements Install bespoke instrumentation across site to meet customer needs Fault find and maintain legacy equipment Work with supply chain and suppliers to deliver fit for purpose equipment Support factory acceptance tests and submarine trials, analysing results as required Undertake peer review, verification, and assurance activities Produce lifecycle management (LCM) documentation and safety/qualification evidence Coach and mentor early career colleagues Essential Skills: Minimum HNC or Degree in Electronic or Electrical Engineering with good knowledge of Electrical and Electronic Principles Proficient in trouble shooting and repairing Complex instrumentation Systems Experience & working knowledge of project lifecycle Ability to read and Interpret technical/schematic drawings Demonstrable experience of defining and conducting test procedures The Instrumentation Development Services (IDS) team: You will join a team of around 20 specialists supporting the Dreadnought programme. The team develops customer requirements, delivers bespoke instrumentation and works closely with Radiation Protection and Shielding across the Barrow-in-Furness site. We offer relocation support packages across all Submarines roles, subject to meeting eligibility criteria. Why BAE Systems? Here you'll build a career with purpose and limitless possibilities. With lifelong learning and meaningful work, this is a place where you can grow your career with confidence and be empowered to be your best. You'll be recognised for your contribution and enjoy rewards tailored to what's most important to you and your family, support for your financial and personal wellbeing, as well as a balanced lifestyle. In an environment embracing sustainable ways of working and with a strong sense of shared purpose, our supportive culture is a place you can feel you belong and proud of the difference you make. A place where everyone can thrive: We're committed to building an inclusive workplace where everyone feels valued and supported. We know that a diversity of backgrounds, perspectives and experiences strengthens our teams and is vital to the work we do. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date: 15th May 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role. Therefore, if you are interested, please submit your application as early as possible.
May 02, 2026
Full time
Job Title: Senior Engineer - Metrology (Instrumentation Calibration) Location: Barrow-in-Furness - Primarily on site with potentially 1 day per week WFH. We offer a range of hybrid and flexible working arrangements - please speak to your recruiter about the options for this particular role Salary: Circa £48,000 Who we are: Join BAE Systems and you'll be part of something bigger. As a valued member of our global colleague network, you'll bring your unique skills and perspectives to help pioneer progress and protect what matters most. You'll be trusted to play your part in delivering the advanced, technology-led defence, aerospace and security solutions of tomorrow, shaping a safer future, for all of us. From the depths of the ocean, to the far reaches of space, there's no limit to where a career at BAE Systems could take you. Job Description: As a Senior Engineer - Metrology (Instrumentation), you will support senior and principal engineers, as well as external specialists, in the development of testing regimes and verification activities for electronic systems. The role involves working closely with customers to develop and clarify requirements, designing and delivering instrumentation solutions, and carrying out testing activities. You will perform data analysis and produce technical reports that support system verification, qualification, and lifecycle management . Core duties: Engage with internal customers to capture and deliver clear requirements Install bespoke instrumentation across site to meet customer needs Fault find and maintain legacy equipment Work with supply chain and suppliers to deliver fit for purpose equipment Support factory acceptance tests and submarine trials, analysing results as required Undertake peer review, verification, and assurance activities Produce lifecycle management (LCM) documentation and safety/qualification evidence Coach and mentor early career colleagues Essential Skills: Minimum HNC or Degree in Electronic or Electrical Engineering with good knowledge of Electrical and Electronic Principles Proficient in trouble shooting and repairing Complex instrumentation Systems Experience & working knowledge of project lifecycle Ability to read and Interpret technical/schematic drawings Demonstrable experience of defining and conducting test procedures The Instrumentation Development Services (IDS) team: You will join a team of around 20 specialists supporting the Dreadnought programme. The team develops customer requirements, delivers bespoke instrumentation and works closely with Radiation Protection and Shielding across the Barrow-in-Furness site. We offer relocation support packages across all Submarines roles, subject to meeting eligibility criteria. Why BAE Systems? Here you'll build a career with purpose and limitless possibilities. With lifelong learning and meaningful work, this is a place where you can grow your career with confidence and be empowered to be your best. You'll be recognised for your contribution and enjoy rewards tailored to what's most important to you and your family, support for your financial and personal wellbeing, as well as a balanced lifestyle. In an environment embracing sustainable ways of working and with a strong sense of shared purpose, our supportive culture is a place you can feel you belong and proud of the difference you make. A place where everyone can thrive: We're committed to building an inclusive workplace where everyone feels valued and supported. We know that a diversity of backgrounds, perspectives and experiences strengthens our teams and is vital to the work we do. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date: 15th May 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role. Therefore, if you are interested, please submit your application as early as possible.
Job Title: Senior Engineer - Metrology (Instrumentation Calibration) Location: Barrow-in-Furness - Primarily on site with potentially 1 day per week WFH. We offer a range of hybrid and flexible working arrangements - please speak to your recruiter about the options for this particular role Salary: Circa £48,000 Who we are: Join BAE Systems and you'll be part of something bigger. As a valued member of our global colleague network, you'll bring your unique skills and perspectives to help pioneer progress and protect what matters most. You'll be trusted to play your part in delivering the advanced, technology-led defence, aerospace and security solutions of tomorrow, shaping a safer future, for all of us. From the depths of the ocean, to the far reaches of space, there's no limit to where a career at BAE Systems could take you. Job Description: As a Senior Engineer - Metrology (Instrumentation), you will support senior and principal engineers, as well as external specialists, in the development of testing regimes and verification activities for electronic systems. The role involves working closely with customers to develop and clarify requirements, designing and delivering instrumentation solutions, and carrying out testing activities. You will perform data analysis and produce technical reports that support system verification, qualification, and lifecycle management . Core duties: Engage with internal customers to capture and deliver clear requirements Install bespoke instrumentation across site to meet customer needs Fault find and maintain legacy equipment Work with supply chain and suppliers to deliver fit for purpose equipment Support factory acceptance tests and submarine trials, analysing results as required Undertake peer review, verification, and assurance activities Produce lifecycle management (LCM) documentation and safety/qualification evidence Coach and mentor early career colleagues Essential Skills: Minimum HNC or Degree in Electronic or Electrical Engineering with good knowledge of Electrical and Electronic Principles Proficient in trouble shooting and repairing Complex instrumentation Systems Experience & working knowledge of project lifecycle Ability to read and Interpret technical/schematic drawings Demonstrable experience of defining and conducting test procedures The Instrumentation Development Services (IDS) team: You will join a team of around 20 specialists supporting the Dreadnought programme. The team develops customer requirements, delivers bespoke instrumentation and works closely with Radiation Protection and Shielding across the Barrow-in-Furness site. We offer relocation support packages across all Submarines roles, subject to meeting eligibility criteria. Why BAE Systems? Here you'll build a career with purpose and limitless possibilities. With lifelong learning and meaningful work, this is a place where you can grow your career with confidence and be empowered to be your best. You'll be recognised for your contribution and enjoy rewards tailored to what's most important to you and your family, support for your financial and personal wellbeing, as well as a balanced lifestyle. In an environment embracing sustainable ways of working and with a strong sense of shared purpose, our supportive culture is a place you can feel you belong and proud of the difference you make. A place where everyone can thrive: We're committed to building an inclusive workplace where everyone feels valued and supported. We know that a diversity of backgrounds, perspectives and experiences strengthens our teams and is vital to the work we do. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date: 15th May 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role. Therefore, if you are interested, please submit your application as early as possible.
May 02, 2026
Full time
Job Title: Senior Engineer - Metrology (Instrumentation Calibration) Location: Barrow-in-Furness - Primarily on site with potentially 1 day per week WFH. We offer a range of hybrid and flexible working arrangements - please speak to your recruiter about the options for this particular role Salary: Circa £48,000 Who we are: Join BAE Systems and you'll be part of something bigger. As a valued member of our global colleague network, you'll bring your unique skills and perspectives to help pioneer progress and protect what matters most. You'll be trusted to play your part in delivering the advanced, technology-led defence, aerospace and security solutions of tomorrow, shaping a safer future, for all of us. From the depths of the ocean, to the far reaches of space, there's no limit to where a career at BAE Systems could take you. Job Description: As a Senior Engineer - Metrology (Instrumentation), you will support senior and principal engineers, as well as external specialists, in the development of testing regimes and verification activities for electronic systems. The role involves working closely with customers to develop and clarify requirements, designing and delivering instrumentation solutions, and carrying out testing activities. You will perform data analysis and produce technical reports that support system verification, qualification, and lifecycle management . Core duties: Engage with internal customers to capture and deliver clear requirements Install bespoke instrumentation across site to meet customer needs Fault find and maintain legacy equipment Work with supply chain and suppliers to deliver fit for purpose equipment Support factory acceptance tests and submarine trials, analysing results as required Undertake peer review, verification, and assurance activities Produce lifecycle management (LCM) documentation and safety/qualification evidence Coach and mentor early career colleagues Essential Skills: Minimum HNC or Degree in Electronic or Electrical Engineering with good knowledge of Electrical and Electronic Principles Proficient in trouble shooting and repairing Complex instrumentation Systems Experience & working knowledge of project lifecycle Ability to read and Interpret technical/schematic drawings Demonstrable experience of defining and conducting test procedures The Instrumentation Development Services (IDS) team: You will join a team of around 20 specialists supporting the Dreadnought programme. The team develops customer requirements, delivers bespoke instrumentation and works closely with Radiation Protection and Shielding across the Barrow-in-Furness site. We offer relocation support packages across all Submarines roles, subject to meeting eligibility criteria. Why BAE Systems? Here you'll build a career with purpose and limitless possibilities. With lifelong learning and meaningful work, this is a place where you can grow your career with confidence and be empowered to be your best. You'll be recognised for your contribution and enjoy rewards tailored to what's most important to you and your family, support for your financial and personal wellbeing, as well as a balanced lifestyle. In an environment embracing sustainable ways of working and with a strong sense of shared purpose, our supportive culture is a place you can feel you belong and proud of the difference you make. A place where everyone can thrive: We're committed to building an inclusive workplace where everyone feels valued and supported. We know that a diversity of backgrounds, perspectives and experiences strengthens our teams and is vital to the work we do. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date: 15th May 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role. Therefore, if you are interested, please submit your application as early as possible.
Job Title: Senior Engineer - Metrology (Instrumentation Calibration) Location: Barrow-in-Furness - Primarily on site with potentially 1 day per week WFH. We offer a range of hybrid and flexible working arrangements - please speak to your recruiter about the options for this particular role Salary: Circa £48,000 Who we are: Join BAE Systems and you'll be part of something bigger. As a valued member of our global colleague network, you'll bring your unique skills and perspectives to help pioneer progress and protect what matters most. You'll be trusted to play your part in delivering the advanced, technology-led defence, aerospace and security solutions of tomorrow, shaping a safer future, for all of us. From the depths of the ocean, to the far reaches of space, there's no limit to where a career at BAE Systems could take you. Job Description: As a Senior Engineer - Metrology (Instrumentation), you will support senior and principal engineers, as well as external specialists, in the development of testing regimes and verification activities for electronic systems. The role involves working closely with customers to develop and clarify requirements, designing and delivering instrumentation solutions, and carrying out testing activities. You will perform data analysis and produce technical reports that support system verification, qualification, and lifecycle management . Core duties: Engage with internal customers to capture and deliver clear requirements Install bespoke instrumentation across site to meet customer needs Fault find and maintain legacy equipment Work with supply chain and suppliers to deliver fit for purpose equipment Support factory acceptance tests and submarine trials, analysing results as required Undertake peer review, verification, and assurance activities Produce lifecycle management (LCM) documentation and safety/qualification evidence Coach and mentor early career colleagues Essential Skills: Minimum HNC or Degree in Electronic or Electrical Engineering with good knowledge of Electrical and Electronic Principles Proficient in trouble shooting and repairing Complex instrumentation Systems Experience & working knowledge of project lifecycle Ability to read and Interpret technical/schematic drawings Demonstrable experience of defining and conducting test procedures The Instrumentation Development Services (IDS) team: You will join a team of around 20 specialists supporting the Dreadnought programme. The team develops customer requirements, delivers bespoke instrumentation and works closely with Radiation Protection and Shielding across the Barrow-in-Furness site. We offer relocation support packages across all Submarines roles, subject to meeting eligibility criteria. Why BAE Systems? Here you'll build a career with purpose and limitless possibilities. With lifelong learning and meaningful work, this is a place where you can grow your career with confidence and be empowered to be your best. You'll be recognised for your contribution and enjoy rewards tailored to what's most important to you and your family, support for your financial and personal wellbeing, as well as a balanced lifestyle. In an environment embracing sustainable ways of working and with a strong sense of shared purpose, our supportive culture is a place you can feel you belong and proud of the difference you make. A place where everyone can thrive: We're committed to building an inclusive workplace where everyone feels valued and supported. We know that a diversity of backgrounds, perspectives and experiences strengthens our teams and is vital to the work we do. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date: 15th May 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role. Therefore, if you are interested, please submit your application as early as possible.
May 02, 2026
Full time
Job Title: Senior Engineer - Metrology (Instrumentation Calibration) Location: Barrow-in-Furness - Primarily on site with potentially 1 day per week WFH. We offer a range of hybrid and flexible working arrangements - please speak to your recruiter about the options for this particular role Salary: Circa £48,000 Who we are: Join BAE Systems and you'll be part of something bigger. As a valued member of our global colleague network, you'll bring your unique skills and perspectives to help pioneer progress and protect what matters most. You'll be trusted to play your part in delivering the advanced, technology-led defence, aerospace and security solutions of tomorrow, shaping a safer future, for all of us. From the depths of the ocean, to the far reaches of space, there's no limit to where a career at BAE Systems could take you. Job Description: As a Senior Engineer - Metrology (Instrumentation), you will support senior and principal engineers, as well as external specialists, in the development of testing regimes and verification activities for electronic systems. The role involves working closely with customers to develop and clarify requirements, designing and delivering instrumentation solutions, and carrying out testing activities. You will perform data analysis and produce technical reports that support system verification, qualification, and lifecycle management . Core duties: Engage with internal customers to capture and deliver clear requirements Install bespoke instrumentation across site to meet customer needs Fault find and maintain legacy equipment Work with supply chain and suppliers to deliver fit for purpose equipment Support factory acceptance tests and submarine trials, analysing results as required Undertake peer review, verification, and assurance activities Produce lifecycle management (LCM) documentation and safety/qualification evidence Coach and mentor early career colleagues Essential Skills: Minimum HNC or Degree in Electronic or Electrical Engineering with good knowledge of Electrical and Electronic Principles Proficient in trouble shooting and repairing Complex instrumentation Systems Experience & working knowledge of project lifecycle Ability to read and Interpret technical/schematic drawings Demonstrable experience of defining and conducting test procedures The Instrumentation Development Services (IDS) team: You will join a team of around 20 specialists supporting the Dreadnought programme. The team develops customer requirements, delivers bespoke instrumentation and works closely with Radiation Protection and Shielding across the Barrow-in-Furness site. We offer relocation support packages across all Submarines roles, subject to meeting eligibility criteria. Why BAE Systems? Here you'll build a career with purpose and limitless possibilities. With lifelong learning and meaningful work, this is a place where you can grow your career with confidence and be empowered to be your best. You'll be recognised for your contribution and enjoy rewards tailored to what's most important to you and your family, support for your financial and personal wellbeing, as well as a balanced lifestyle. In an environment embracing sustainable ways of working and with a strong sense of shared purpose, our supportive culture is a place you can feel you belong and proud of the difference you make. A place where everyone can thrive: We're committed to building an inclusive workplace where everyone feels valued and supported. We know that a diversity of backgrounds, perspectives and experiences strengthens our teams and is vital to the work we do. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date: 15th May 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role. Therefore, if you are interested, please submit your application as early as possible.
Lead Substations Plant Engineer (m/f/d)- Transmission & Distribution Are you an experienced extra high voltage or high voltage engineer? Do you want to push the boundaries of your profession and develop in an open, collaborative, and empowering culture? Are you looking for an exciting new challenge? If this sounds like you, or you're curious to learn more, then this role could be the perfect opportunity. Join our Transmission and Distribution Department as our new Lead Substations Plant Engineer (m/f/d) and work with us to close the gap to a sustainable future. Your new role The principal function of this position is to lead and oversee electrical design activities within the team, directed by the Head of T&D, and to assist in developing the Group's capabilities in HV/EHV Engineering. The role includes a senior project role focused on coordinated and compliant design, client liaison, mentoring, and coaching junior team members. Responsibilities include meetings with clients, contractors, and designers, requiring strong communication skills and relevant experience. Site visits or visits to non-UK design offices may be required during design and delivery. The role involves taking responsibility for Work Package Design Management, including all reporting to satisfy design management requirements. Your key responsibilities will be Lead role for primary design of HV and EHV substations in compliance with relevant BS, IEC, and customer-specified standards. Responsibility for coordination of design of substation and/or OH/cable design from concept to detailed design as per client requirements. Multidisciplinary design management and client management. Liaison with other members of the T&D design team, power systems team and client engineers. Technical management of junior engineers and CAD draught professionals. Accountable for compliant and coordinated primary engineering design on own projects as well as for other team members. Attend technical meetings with the client to ensure client satisfaction. Development and training of junior engineers. About you HNC/HND/Degree qualified in Electrical Engineering with experience in the UK Electricity Transmission and Distribution industry. Ideally NG authorised. Membership of the IET, Chartered status, or working towards Chartered Engineer status. Experience of working and/or authorisation with major UK utilities such as NG or DNO companies. Possess a proficient understanding of the electricity industry & regulatory standards, policies, and their application to the role. Strong electrical knowledge and experience in the equipment design, specification, layout, and detailed engineering of extra and high voltage substation electrical equipment and product range. A good understanding of electrical plant, transformer, protection, relays, and control principles and construction disciplines and current ENA, BS, and IEC electrotechnical engineering standards, to ensure full application and compliance requirements can be achieved. Multi-disciplinary design management experience. An ability and willingness to work in a multi-disciplinary and multi-locational team environment in collaboration with our clients. Dedicated to a Net Zero future. What we can offer you Commitment to your development. Leaders guided by our Leadership Principles. A culture that welcomes you as the unique person you are. Inspiration from colleagues, clients, and projects. The long term thinking of a foundation owned company. Flexible work environment. 27 days annual leave plus bank holidays. Matched pension contributions. Private medical cover and life assurance. Equality, diversity, and inclusion are at the heart of what we do.
May 02, 2026
Full time
Lead Substations Plant Engineer (m/f/d)- Transmission & Distribution Are you an experienced extra high voltage or high voltage engineer? Do you want to push the boundaries of your profession and develop in an open, collaborative, and empowering culture? Are you looking for an exciting new challenge? If this sounds like you, or you're curious to learn more, then this role could be the perfect opportunity. Join our Transmission and Distribution Department as our new Lead Substations Plant Engineer (m/f/d) and work with us to close the gap to a sustainable future. Your new role The principal function of this position is to lead and oversee electrical design activities within the team, directed by the Head of T&D, and to assist in developing the Group's capabilities in HV/EHV Engineering. The role includes a senior project role focused on coordinated and compliant design, client liaison, mentoring, and coaching junior team members. Responsibilities include meetings with clients, contractors, and designers, requiring strong communication skills and relevant experience. Site visits or visits to non-UK design offices may be required during design and delivery. The role involves taking responsibility for Work Package Design Management, including all reporting to satisfy design management requirements. Your key responsibilities will be Lead role for primary design of HV and EHV substations in compliance with relevant BS, IEC, and customer-specified standards. Responsibility for coordination of design of substation and/or OH/cable design from concept to detailed design as per client requirements. Multidisciplinary design management and client management. Liaison with other members of the T&D design team, power systems team and client engineers. Technical management of junior engineers and CAD draught professionals. Accountable for compliant and coordinated primary engineering design on own projects as well as for other team members. Attend technical meetings with the client to ensure client satisfaction. Development and training of junior engineers. About you HNC/HND/Degree qualified in Electrical Engineering with experience in the UK Electricity Transmission and Distribution industry. Ideally NG authorised. Membership of the IET, Chartered status, or working towards Chartered Engineer status. Experience of working and/or authorisation with major UK utilities such as NG or DNO companies. Possess a proficient understanding of the electricity industry & regulatory standards, policies, and their application to the role. Strong electrical knowledge and experience in the equipment design, specification, layout, and detailed engineering of extra and high voltage substation electrical equipment and product range. A good understanding of electrical plant, transformer, protection, relays, and control principles and construction disciplines and current ENA, BS, and IEC electrotechnical engineering standards, to ensure full application and compliance requirements can be achieved. Multi-disciplinary design management experience. An ability and willingness to work in a multi-disciplinary and multi-locational team environment in collaboration with our clients. Dedicated to a Net Zero future. What we can offer you Commitment to your development. Leaders guided by our Leadership Principles. A culture that welcomes you as the unique person you are. Inspiration from colleagues, clients, and projects. The long term thinking of a foundation owned company. Flexible work environment. 27 days annual leave plus bank holidays. Matched pension contributions. Private medical cover and life assurance. Equality, diversity, and inclusion are at the heart of what we do.
Job Title: Senior Engineer - Metrology (Instrumentation Calibration) Location: Barrow-in-Furness - Primarily on site with potentially 1 day per week WFH. We offer a range of hybrid and flexible working arrangements - please speak to your recruiter about the options for this particular role Salary: Circa £48,000 Who we are: Join BAE Systems and you'll be part of something bigger. As a valued member of our global colleague network, you'll bring your unique skills and perspectives to help pioneer progress and protect what matters most. You'll be trusted to play your part in delivering the advanced, technology-led defence, aerospace and security solutions of tomorrow, shaping a safer future, for all of us. From the depths of the ocean, to the far reaches of space, there's no limit to where a career at BAE Systems could take you. Job Description: As a Senior Engineer - Metrology (Instrumentation), you will support senior and principal engineers, as well as external specialists, in the development of testing regimes and verification activities for electronic systems. The role involves working closely with customers to develop and clarify requirements, designing and delivering instrumentation solutions, and carrying out testing activities. You will perform data analysis and produce technical reports that support system verification, qualification, and lifecycle management . Core duties: Engage with internal customers to capture and deliver clear requirements Install bespoke instrumentation across site to meet customer needs Fault find and maintain legacy equipment Work with supply chain and suppliers to deliver fit for purpose equipment Support factory acceptance tests and submarine trials, analysing results as required Undertake peer review, verification, and assurance activities Produce lifecycle management (LCM) documentation and safety/qualification evidence Coach and mentor early career colleagues Essential Skills: Minimum HNC or Degree in Electronic or Electrical Engineering with good knowledge of Electrical and Electronic Principles Proficient in trouble shooting and repairing Complex instrumentation Systems Experience & working knowledge of project lifecycle Ability to read and Interpret technical/schematic drawings Demonstrable experience of defining and conducting test procedures The Instrumentation Development Services (IDS) team: You will join a team of around 20 specialists supporting the Dreadnought programme. The team develops customer requirements, delivers bespoke instrumentation and works closely with Radiation Protection and Shielding across the Barrow-in-Furness site. We offer relocation support packages across all Submarines roles, subject to meeting eligibility criteria. Why BAE Systems? Here you'll build a career with purpose and limitless possibilities. With lifelong learning and meaningful work, this is a place where you can grow your career with confidence and be empowered to be your best. You'll be recognised for your contribution and enjoy rewards tailored to what's most important to you and your family, support for your financial and personal wellbeing, as well as a balanced lifestyle. In an environment embracing sustainable ways of working and with a strong sense of shared purpose, our supportive culture is a place you can feel you belong and proud of the difference you make. A place where everyone can thrive: We're committed to building an inclusive workplace where everyone feels valued and supported. We know that a diversity of backgrounds, perspectives and experiences strengthens our teams and is vital to the work we do. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date: 15th May 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role. Therefore, if you are interested, please submit your application as early as possible.
May 02, 2026
Full time
Job Title: Senior Engineer - Metrology (Instrumentation Calibration) Location: Barrow-in-Furness - Primarily on site with potentially 1 day per week WFH. We offer a range of hybrid and flexible working arrangements - please speak to your recruiter about the options for this particular role Salary: Circa £48,000 Who we are: Join BAE Systems and you'll be part of something bigger. As a valued member of our global colleague network, you'll bring your unique skills and perspectives to help pioneer progress and protect what matters most. You'll be trusted to play your part in delivering the advanced, technology-led defence, aerospace and security solutions of tomorrow, shaping a safer future, for all of us. From the depths of the ocean, to the far reaches of space, there's no limit to where a career at BAE Systems could take you. Job Description: As a Senior Engineer - Metrology (Instrumentation), you will support senior and principal engineers, as well as external specialists, in the development of testing regimes and verification activities for electronic systems. The role involves working closely with customers to develop and clarify requirements, designing and delivering instrumentation solutions, and carrying out testing activities. You will perform data analysis and produce technical reports that support system verification, qualification, and lifecycle management . Core duties: Engage with internal customers to capture and deliver clear requirements Install bespoke instrumentation across site to meet customer needs Fault find and maintain legacy equipment Work with supply chain and suppliers to deliver fit for purpose equipment Support factory acceptance tests and submarine trials, analysing results as required Undertake peer review, verification, and assurance activities Produce lifecycle management (LCM) documentation and safety/qualification evidence Coach and mentor early career colleagues Essential Skills: Minimum HNC or Degree in Electronic or Electrical Engineering with good knowledge of Electrical and Electronic Principles Proficient in trouble shooting and repairing Complex instrumentation Systems Experience & working knowledge of project lifecycle Ability to read and Interpret technical/schematic drawings Demonstrable experience of defining and conducting test procedures The Instrumentation Development Services (IDS) team: You will join a team of around 20 specialists supporting the Dreadnought programme. The team develops customer requirements, delivers bespoke instrumentation and works closely with Radiation Protection and Shielding across the Barrow-in-Furness site. We offer relocation support packages across all Submarines roles, subject to meeting eligibility criteria. Why BAE Systems? Here you'll build a career with purpose and limitless possibilities. With lifelong learning and meaningful work, this is a place where you can grow your career with confidence and be empowered to be your best. You'll be recognised for your contribution and enjoy rewards tailored to what's most important to you and your family, support for your financial and personal wellbeing, as well as a balanced lifestyle. In an environment embracing sustainable ways of working and with a strong sense of shared purpose, our supportive culture is a place you can feel you belong and proud of the difference you make. A place where everyone can thrive: We're committed to building an inclusive workplace where everyone feels valued and supported. We know that a diversity of backgrounds, perspectives and experiences strengthens our teams and is vital to the work we do. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date: 15th May 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role. Therefore, if you are interested, please submit your application as early as possible.
Job Title: Principal Product Safety Engineer Location: Broad Oak, Frimley, New Malden or Filton. We offer a range of hybrid and flexible working arrangements. Please speak to your recruiter about the options for this particular role Salary: Circa £70,000 depending on skills and experience What you'll be doing: Providing support to the functions Technical Authority teams with the management of the hazards, risks and associated mitigations and contribute to the development of the hazard log and the maturity of information contained within Responsible for product safety strategy/argument assessment against major subsystems or key complex technologies Production of high-quality submissions including hazard logs, safety cases and safety plans Organising and facilitate HAZIDs and review meetings and contribute to other HAZIDs when required Working with the Technical Authority teams and embedded Safety Engineers in collating adequate product safety related evidence to support the safety case argument and acceptance via the Requirements and Acceptance Team Your skills and experiences: Knowledge of safety management processes and techniques Experience of working in more than one phase of the Engineering Lifecycle, with sufficient experience of design principles to enable a good understanding of adjacent phases and through life engineering issues Awareness of customer defence standards such as: DSA-02, JSP430, Def Stan 00-56, MilStn 882E, BS EN 61508 Familiar with the principles of a Safety Management System Experienced in writing technical documentation to an elevated level Experience in Product Safety within Software Systems would be advantageous Engineers at all levels should possess an academic qualification in Engineering or other related STEM subjects as well as specific (either academic or professional) qualifications and become recognised as Incorporated or Chartered Engineers through an appropriate recognised professional institution. Engineers are encouraged, and will be supported, to achieve the relevant accreditation. Preference will be given to candidates who are already professionally registered. Benefits: As well as a competitive pension scheme, BAE Systems also offers employee share plans, an extensive range of flexible discounted health, wellbeing and lifestyle benefits, including a green car scheme, private health plans and shopping discounts - you may also be eligible for an annual incentive. The Product Safety team: The Combat System is the heart of any platform, and being part of integrating these complex systems safely through design and assurance is the role of the Product Safety team. Working independently and collaboratively with a like-minded Product Safety Engineers, you will be critical is underpinning the integrity of cutting-edge technology from design concept through to disposal. As a valued stakeholder working alongside Design Technical Authorities, you will play a pivotal role challenging norm as well of bringing new ideas to table across a varied and ever-changing portfolio of Combat System projects. Why BAE Systems? This is a place where you'll be able to make a real difference. You'll be part of an inclusive culture that values diversity of thought, rewards integrity, and merit, and where you'll be empowered to fulfil your potential. We welcome people from all backgrounds and want to make sure that our recruitment processes are as inclusive as possible. If you have a disability or health condition (for example dyslexia, autism, an anxiety disorder etc .) that may affect your performance in certain assessment types, please speak to your recruiter about potential reasonable adjustments. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date: 19th May 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible.
May 02, 2026
Full time
Job Title: Principal Product Safety Engineer Location: Broad Oak, Frimley, New Malden or Filton. We offer a range of hybrid and flexible working arrangements. Please speak to your recruiter about the options for this particular role Salary: Circa £70,000 depending on skills and experience What you'll be doing: Providing support to the functions Technical Authority teams with the management of the hazards, risks and associated mitigations and contribute to the development of the hazard log and the maturity of information contained within Responsible for product safety strategy/argument assessment against major subsystems or key complex technologies Production of high-quality submissions including hazard logs, safety cases and safety plans Organising and facilitate HAZIDs and review meetings and contribute to other HAZIDs when required Working with the Technical Authority teams and embedded Safety Engineers in collating adequate product safety related evidence to support the safety case argument and acceptance via the Requirements and Acceptance Team Your skills and experiences: Knowledge of safety management processes and techniques Experience of working in more than one phase of the Engineering Lifecycle, with sufficient experience of design principles to enable a good understanding of adjacent phases and through life engineering issues Awareness of customer defence standards such as: DSA-02, JSP430, Def Stan 00-56, MilStn 882E, BS EN 61508 Familiar with the principles of a Safety Management System Experienced in writing technical documentation to an elevated level Experience in Product Safety within Software Systems would be advantageous Engineers at all levels should possess an academic qualification in Engineering or other related STEM subjects as well as specific (either academic or professional) qualifications and become recognised as Incorporated or Chartered Engineers through an appropriate recognised professional institution. Engineers are encouraged, and will be supported, to achieve the relevant accreditation. Preference will be given to candidates who are already professionally registered. Benefits: As well as a competitive pension scheme, BAE Systems also offers employee share plans, an extensive range of flexible discounted health, wellbeing and lifestyle benefits, including a green car scheme, private health plans and shopping discounts - you may also be eligible for an annual incentive. The Product Safety team: The Combat System is the heart of any platform, and being part of integrating these complex systems safely through design and assurance is the role of the Product Safety team. Working independently and collaboratively with a like-minded Product Safety Engineers, you will be critical is underpinning the integrity of cutting-edge technology from design concept through to disposal. As a valued stakeholder working alongside Design Technical Authorities, you will play a pivotal role challenging norm as well of bringing new ideas to table across a varied and ever-changing portfolio of Combat System projects. Why BAE Systems? This is a place where you'll be able to make a real difference. You'll be part of an inclusive culture that values diversity of thought, rewards integrity, and merit, and where you'll be empowered to fulfil your potential. We welcome people from all backgrounds and want to make sure that our recruitment processes are as inclusive as possible. If you have a disability or health condition (for example dyslexia, autism, an anxiety disorder etc .) that may affect your performance in certain assessment types, please speak to your recruiter about potential reasonable adjustments. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date: 19th May 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible.
Job Title: Principal Product Safety Engineer Location: Broad Oak, Frimley, New Malden or Filton. We offer a range of hybrid and flexible working arrangements. Please speak to your recruiter about the options for this particular role Salary: Circa £70,000 depending on skills and experience What you'll be doing: Providing support to the functions Technical Authority teams with the management of the hazards, risks and associated mitigations and contribute to the development of the hazard log and the maturity of information contained within Responsible for product safety strategy/argument assessment against major subsystems or key complex technologies Production of high-quality submissions including hazard logs, safety cases and safety plans Organising and facilitate HAZIDs and review meetings and contribute to other HAZIDs when required Working with the Technical Authority teams and embedded Safety Engineers in collating adequate product safety related evidence to support the safety case argument and acceptance via the Requirements and Acceptance Team Your skills and experiences: Knowledge of safety management processes and techniques Experience of working in more than one phase of the Engineering Lifecycle, with sufficient experience of design principles to enable a good understanding of adjacent phases and through life engineering issues Awareness of customer defence standards such as: DSA-02, JSP430, Def Stan 00-56, MilStn 882E, BS EN 61508 Familiar with the principles of a Safety Management System Experienced in writing technical documentation to an elevated level Experience in Product Safety within Software Systems would be advantageous Engineers at all levels should possess an academic qualification in Engineering or other related STEM subjects as well as specific (either academic or professional) qualifications and become recognised as Incorporated or Chartered Engineers through an appropriate recognised professional institution. Engineers are encouraged, and will be supported, to achieve the relevant accreditation. Preference will be given to candidates who are already professionally registered. Benefits: As well as a competitive pension scheme, BAE Systems also offers employee share plans, an extensive range of flexible discounted health, wellbeing and lifestyle benefits, including a green car scheme, private health plans and shopping discounts - you may also be eligible for an annual incentive. The Product Safety team: The Combat System is the heart of any platform, and being part of integrating these complex systems safely through design and assurance is the role of the Product Safety team. Working independently and collaboratively with a like-minded Product Safety Engineers, you will be critical is underpinning the integrity of cutting-edge technology from design concept through to disposal. As a valued stakeholder working alongside Design Technical Authorities, you will play a pivotal role challenging norm as well of bringing new ideas to table across a varied and ever-changing portfolio of Combat System projects. Why BAE Systems? This is a place where you'll be able to make a real difference. You'll be part of an inclusive culture that values diversity of thought, rewards integrity, and merit, and where you'll be empowered to fulfil your potential. We welcome people from all backgrounds and want to make sure that our recruitment processes are as inclusive as possible. If you have a disability or health condition (for example dyslexia, autism, an anxiety disorder etc .) that may affect your performance in certain assessment types, please speak to your recruiter about potential reasonable adjustments. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date: 19th May 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible.
May 01, 2026
Full time
Job Title: Principal Product Safety Engineer Location: Broad Oak, Frimley, New Malden or Filton. We offer a range of hybrid and flexible working arrangements. Please speak to your recruiter about the options for this particular role Salary: Circa £70,000 depending on skills and experience What you'll be doing: Providing support to the functions Technical Authority teams with the management of the hazards, risks and associated mitigations and contribute to the development of the hazard log and the maturity of information contained within Responsible for product safety strategy/argument assessment against major subsystems or key complex technologies Production of high-quality submissions including hazard logs, safety cases and safety plans Organising and facilitate HAZIDs and review meetings and contribute to other HAZIDs when required Working with the Technical Authority teams and embedded Safety Engineers in collating adequate product safety related evidence to support the safety case argument and acceptance via the Requirements and Acceptance Team Your skills and experiences: Knowledge of safety management processes and techniques Experience of working in more than one phase of the Engineering Lifecycle, with sufficient experience of design principles to enable a good understanding of adjacent phases and through life engineering issues Awareness of customer defence standards such as: DSA-02, JSP430, Def Stan 00-56, MilStn 882E, BS EN 61508 Familiar with the principles of a Safety Management System Experienced in writing technical documentation to an elevated level Experience in Product Safety within Software Systems would be advantageous Engineers at all levels should possess an academic qualification in Engineering or other related STEM subjects as well as specific (either academic or professional) qualifications and become recognised as Incorporated or Chartered Engineers through an appropriate recognised professional institution. Engineers are encouraged, and will be supported, to achieve the relevant accreditation. Preference will be given to candidates who are already professionally registered. Benefits: As well as a competitive pension scheme, BAE Systems also offers employee share plans, an extensive range of flexible discounted health, wellbeing and lifestyle benefits, including a green car scheme, private health plans and shopping discounts - you may also be eligible for an annual incentive. The Product Safety team: The Combat System is the heart of any platform, and being part of integrating these complex systems safely through design and assurance is the role of the Product Safety team. Working independently and collaboratively with a like-minded Product Safety Engineers, you will be critical is underpinning the integrity of cutting-edge technology from design concept through to disposal. As a valued stakeholder working alongside Design Technical Authorities, you will play a pivotal role challenging norm as well of bringing new ideas to table across a varied and ever-changing portfolio of Combat System projects. Why BAE Systems? This is a place where you'll be able to make a real difference. You'll be part of an inclusive culture that values diversity of thought, rewards integrity, and merit, and where you'll be empowered to fulfil your potential. We welcome people from all backgrounds and want to make sure that our recruitment processes are as inclusive as possible. If you have a disability or health condition (for example dyslexia, autism, an anxiety disorder etc .) that may affect your performance in certain assessment types, please speak to your recruiter about potential reasonable adjustments. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date: 19th May 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible.
Job Title: Principal Electronics Systems Engineer Location: Cowes, Portsmouth Broad Oak, Great Baddow, 3 days a week onsite We offer a range of flexible working arrangements - please speak to your recruiter about the options for this particular role Salary: Up to £87,200 (dependent on skills and experience) Part time & accruing hours available' Please let us know if you would like to discuss these options. Who we are: Join BAE Systems and you'll be part of something bigger. As a valued member of our global colleague network, you'll bring your unique skills and perspectives to help pioneer progress and protect what matters most. You'll be trusted to play your part in delivering the advanced, technology-led defence, aerospace and security solutions of tomorrow, shaping a safer future, for all of us. From the depths of the ocean, to the far reaches of space, there's no limit to where a career at BAE Systems could take you. Role description: A Principal Electronics Systems specialist who provides authoritative leadership across the full engineering lifecycle, solving complex electronic systems challenges , defining and assuring designs, and guiding multidisciplinary teams. The role applies deep electronics expertise , acts as design authority, and ensures consistent, high quality engineering across the entire radar system. Core Duties: Providing support to the SDA regarding overall Radar System design. Responsible for defining and capturing digital requirements from board level to sub-system level. Provide digital techniques support to the SDA and techniques groups (RF, software, digits, mechanical, DO) at all stagers throughout the design life cycle. Provide support to digital techniques team throughout the design process ensuring adherence to established design protocols. Provide analysis of system architectures with a view to providing guidance on make/buy/COTS decisions . Define test and integration plans from board to system level. System Design Assurance - ensuring there is enough built in functionality to support design assurance. Also contributing to the generation of the system design assurance specification. Essential Skills: You'll have a degree or significant experience in Electronic Engineering or a closely related subject. You'll have experience in digital electronics, including FPGA development, high speed interfaces (e.g., serial FPDP, JESD204), COTS hardware and PCB design. You'll have experience in sub system and system integration and test. You'll have familiarity with Xilinx/AMD FPGA products and Vivado design tools. You'll have experience in radar system data analysis . You'll have experience across the full design process, from requirements through to design assurance and sign off. You'll have a solid understanding of radar operation, particularly Active Electronically Scanned Array (AESA) radars. Benefits: As well as a competitive pension scheme, BAE Systems also offers employee share plans, an extensive range of flexible discounted health, wellbeing and lifestyle benefits, including a green car scheme, private health plans and shopping discounts - you may also be eligible for an annual incentive. The Future Radar Team: Join us in shaping the Future of Radar Technology. Building on our heritage of cutting edge, world leading radar products, we are rapidly evolving our portfolio to enhance existing capabilities while pioneering brand new systems designed to counter emerging and future threats across the battlespace. Through close collaboration with our customers and sustained investment in exceptional talent, we are committed to remaining at the forefront of defence innovation and defining the next generation of radar solutions for Future Air Dominance Our workplace in Cowes is an easily accessible commute from Southampton with a regular foot passenger ferry and BAE shuttle service from the ferry terminal to site. As the world has evolved, so has the way we work. Our working approach will enable you to have flexibility with your working hours, depending on your role and location. This could include accruing hours as well as flexibility around start and finish times, ensuring you can balance life at work, on site and life at home. Why BAE Systems? Here you'll build a career with purpose and limitless possibilities. With lifelong learning and meaningful work, this is a place where you can grow your career with confidence and be empowered to be your best. You'll be recognised for your contribution and enjoy rewards tailored to what's most important to you and your family, support for your financial and personal wellbeing, as well as a balanced lifestyle. In an environment embracing sustainable ways of working and with a strong sense of shared purpose, our supportive culture is a place you can feel you belong and proud of the difference you make. A place where everyone can thrive: We're committed to building an inclusive workplace where everyone feels valued and supported. We know that a diversity of backgrounds, perspectives and experiences strengthens our teams and is vital to the work we do. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date 19th May 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible.
May 01, 2026
Full time
Job Title: Principal Electronics Systems Engineer Location: Cowes, Portsmouth Broad Oak, Great Baddow, 3 days a week onsite We offer a range of flexible working arrangements - please speak to your recruiter about the options for this particular role Salary: Up to £87,200 (dependent on skills and experience) Part time & accruing hours available' Please let us know if you would like to discuss these options. Who we are: Join BAE Systems and you'll be part of something bigger. As a valued member of our global colleague network, you'll bring your unique skills and perspectives to help pioneer progress and protect what matters most. You'll be trusted to play your part in delivering the advanced, technology-led defence, aerospace and security solutions of tomorrow, shaping a safer future, for all of us. From the depths of the ocean, to the far reaches of space, there's no limit to where a career at BAE Systems could take you. Role description: A Principal Electronics Systems specialist who provides authoritative leadership across the full engineering lifecycle, solving complex electronic systems challenges , defining and assuring designs, and guiding multidisciplinary teams. The role applies deep electronics expertise , acts as design authority, and ensures consistent, high quality engineering across the entire radar system. Core Duties: Providing support to the SDA regarding overall Radar System design. Responsible for defining and capturing digital requirements from board level to sub-system level. Provide digital techniques support to the SDA and techniques groups (RF, software, digits, mechanical, DO) at all stagers throughout the design life cycle. Provide support to digital techniques team throughout the design process ensuring adherence to established design protocols. Provide analysis of system architectures with a view to providing guidance on make/buy/COTS decisions . Define test and integration plans from board to system level. System Design Assurance - ensuring there is enough built in functionality to support design assurance. Also contributing to the generation of the system design assurance specification. Essential Skills: You'll have a degree or significant experience in Electronic Engineering or a closely related subject. You'll have experience in digital electronics, including FPGA development, high speed interfaces (e.g., serial FPDP, JESD204), COTS hardware and PCB design. You'll have experience in sub system and system integration and test. You'll have familiarity with Xilinx/AMD FPGA products and Vivado design tools. You'll have experience in radar system data analysis . You'll have experience across the full design process, from requirements through to design assurance and sign off. You'll have a solid understanding of radar operation, particularly Active Electronically Scanned Array (AESA) radars. Benefits: As well as a competitive pension scheme, BAE Systems also offers employee share plans, an extensive range of flexible discounted health, wellbeing and lifestyle benefits, including a green car scheme, private health plans and shopping discounts - you may also be eligible for an annual incentive. The Future Radar Team: Join us in shaping the Future of Radar Technology. Building on our heritage of cutting edge, world leading radar products, we are rapidly evolving our portfolio to enhance existing capabilities while pioneering brand new systems designed to counter emerging and future threats across the battlespace. Through close collaboration with our customers and sustained investment in exceptional talent, we are committed to remaining at the forefront of defence innovation and defining the next generation of radar solutions for Future Air Dominance Our workplace in Cowes is an easily accessible commute from Southampton with a regular foot passenger ferry and BAE shuttle service from the ferry terminal to site. As the world has evolved, so has the way we work. Our working approach will enable you to have flexibility with your working hours, depending on your role and location. This could include accruing hours as well as flexibility around start and finish times, ensuring you can balance life at work, on site and life at home. Why BAE Systems? Here you'll build a career with purpose and limitless possibilities. With lifelong learning and meaningful work, this is a place where you can grow your career with confidence and be empowered to be your best. You'll be recognised for your contribution and enjoy rewards tailored to what's most important to you and your family, support for your financial and personal wellbeing, as well as a balanced lifestyle. In an environment embracing sustainable ways of working and with a strong sense of shared purpose, our supportive culture is a place you can feel you belong and proud of the difference you make. A place where everyone can thrive: We're committed to building an inclusive workplace where everyone feels valued and supported. We know that a diversity of backgrounds, perspectives and experiences strengthens our teams and is vital to the work we do. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date 19th May 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible.
Job Title: Principal Electronics Systems Engineer Location: Cowes, Portsmouth Broad Oak, Great Baddow, 3 days a week onsite We offer a range of flexible working arrangements - please speak to your recruiter about the options for this particular role Salary: Up to £87,200 (dependent on skills and experience) Part time & accruing hours available' Please let us know if you would like to discuss these options. Who we are: Join BAE Systems and you'll be part of something bigger. As a valued member of our global colleague network, you'll bring your unique skills and perspectives to help pioneer progress and protect what matters most. You'll be trusted to play your part in delivering the advanced, technology-led defence, aerospace and security solutions of tomorrow, shaping a safer future, for all of us. From the depths of the ocean, to the far reaches of space, there's no limit to where a career at BAE Systems could take you. Role description: A Principal Electronics Systems specialist who provides authoritative leadership across the full engineering lifecycle, solving complex electronic systems challenges , defining and assuring designs, and guiding multidisciplinary teams. The role applies deep electronics expertise , acts as design authority, and ensures consistent, high quality engineering across the entire radar system. Core Duties: Providing support to the SDA regarding overall Radar System design. Responsible for defining and capturing digital requirements from board level to sub-system level. Provide digital techniques support to the SDA and techniques groups (RF, software, digits, mechanical, DO) at all stagers throughout the design life cycle. Provide support to digital techniques team throughout the design process ensuring adherence to established design protocols. Provide analysis of system architectures with a view to providing guidance on make/buy/COTS decisions . Define test and integration plans from board to system level. System Design Assurance - ensuring there is enough built in functionality to support design assurance. Also contributing to the generation of the system design assurance specification. Essential Skills: You'll have a degree or significant experience in Electronic Engineering or a closely related subject. You'll have experience in digital electronics, including FPGA development, high speed interfaces (e.g., serial FPDP, JESD204), COTS hardware and PCB design. You'll have experience in sub system and system integration and test. You'll have familiarity with Xilinx/AMD FPGA products and Vivado design tools. You'll have experience in radar system data analysis . You'll have experience across the full design process, from requirements through to design assurance and sign off. You'll have a solid understanding of radar operation, particularly Active Electronically Scanned Array (AESA) radars. Benefits: As well as a competitive pension scheme, BAE Systems also offers employee share plans, an extensive range of flexible discounted health, wellbeing and lifestyle benefits, including a green car scheme, private health plans and shopping discounts - you may also be eligible for an annual incentive. The Future Radar Team: Join us in shaping the Future of Radar Technology. Building on our heritage of cutting edge, world leading radar products, we are rapidly evolving our portfolio to enhance existing capabilities while pioneering brand new systems designed to counter emerging and future threats across the battlespace. Through close collaboration with our customers and sustained investment in exceptional talent, we are committed to remaining at the forefront of defence innovation and defining the next generation of radar solutions for Future Air Dominance Our workplace in Cowes is an easily accessible commute from Southampton with a regular foot passenger ferry and BAE shuttle service from the ferry terminal to site. As the world has evolved, so has the way we work. Our working approach will enable you to have flexibility with your working hours, depending on your role and location. This could include accruing hours as well as flexibility around start and finish times, ensuring you can balance life at work, on site and life at home. Why BAE Systems? Here you'll build a career with purpose and limitless possibilities. With lifelong learning and meaningful work, this is a place where you can grow your career with confidence and be empowered to be your best. You'll be recognised for your contribution and enjoy rewards tailored to what's most important to you and your family, support for your financial and personal wellbeing, as well as a balanced lifestyle. In an environment embracing sustainable ways of working and with a strong sense of shared purpose, our supportive culture is a place you can feel you belong and proud of the difference you make. A place where everyone can thrive: We're committed to building an inclusive workplace where everyone feels valued and supported. We know that a diversity of backgrounds, perspectives and experiences strengthens our teams and is vital to the work we do. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date 19th May 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible.
May 01, 2026
Full time
Job Title: Principal Electronics Systems Engineer Location: Cowes, Portsmouth Broad Oak, Great Baddow, 3 days a week onsite We offer a range of flexible working arrangements - please speak to your recruiter about the options for this particular role Salary: Up to £87,200 (dependent on skills and experience) Part time & accruing hours available' Please let us know if you would like to discuss these options. Who we are: Join BAE Systems and you'll be part of something bigger. As a valued member of our global colleague network, you'll bring your unique skills and perspectives to help pioneer progress and protect what matters most. You'll be trusted to play your part in delivering the advanced, technology-led defence, aerospace and security solutions of tomorrow, shaping a safer future, for all of us. From the depths of the ocean, to the far reaches of space, there's no limit to where a career at BAE Systems could take you. Role description: A Principal Electronics Systems specialist who provides authoritative leadership across the full engineering lifecycle, solving complex electronic systems challenges , defining and assuring designs, and guiding multidisciplinary teams. The role applies deep electronics expertise , acts as design authority, and ensures consistent, high quality engineering across the entire radar system. Core Duties: Providing support to the SDA regarding overall Radar System design. Responsible for defining and capturing digital requirements from board level to sub-system level. Provide digital techniques support to the SDA and techniques groups (RF, software, digits, mechanical, DO) at all stagers throughout the design life cycle. Provide support to digital techniques team throughout the design process ensuring adherence to established design protocols. Provide analysis of system architectures with a view to providing guidance on make/buy/COTS decisions . Define test and integration plans from board to system level. System Design Assurance - ensuring there is enough built in functionality to support design assurance. Also contributing to the generation of the system design assurance specification. Essential Skills: You'll have a degree or significant experience in Electronic Engineering or a closely related subject. You'll have experience in digital electronics, including FPGA development, high speed interfaces (e.g., serial FPDP, JESD204), COTS hardware and PCB design. You'll have experience in sub system and system integration and test. You'll have familiarity with Xilinx/AMD FPGA products and Vivado design tools. You'll have experience in radar system data analysis . You'll have experience across the full design process, from requirements through to design assurance and sign off. You'll have a solid understanding of radar operation, particularly Active Electronically Scanned Array (AESA) radars. Benefits: As well as a competitive pension scheme, BAE Systems also offers employee share plans, an extensive range of flexible discounted health, wellbeing and lifestyle benefits, including a green car scheme, private health plans and shopping discounts - you may also be eligible for an annual incentive. The Future Radar Team: Join us in shaping the Future of Radar Technology. Building on our heritage of cutting edge, world leading radar products, we are rapidly evolving our portfolio to enhance existing capabilities while pioneering brand new systems designed to counter emerging and future threats across the battlespace. Through close collaboration with our customers and sustained investment in exceptional talent, we are committed to remaining at the forefront of defence innovation and defining the next generation of radar solutions for Future Air Dominance Our workplace in Cowes is an easily accessible commute from Southampton with a regular foot passenger ferry and BAE shuttle service from the ferry terminal to site. As the world has evolved, so has the way we work. Our working approach will enable you to have flexibility with your working hours, depending on your role and location. This could include accruing hours as well as flexibility around start and finish times, ensuring you can balance life at work, on site and life at home. Why BAE Systems? Here you'll build a career with purpose and limitless possibilities. With lifelong learning and meaningful work, this is a place where you can grow your career with confidence and be empowered to be your best. You'll be recognised for your contribution and enjoy rewards tailored to what's most important to you and your family, support for your financial and personal wellbeing, as well as a balanced lifestyle. In an environment embracing sustainable ways of working and with a strong sense of shared purpose, our supportive culture is a place you can feel you belong and proud of the difference you make. A place where everyone can thrive: We're committed to building an inclusive workplace where everyone feels valued and supported. We know that a diversity of backgrounds, perspectives and experiences strengthens our teams and is vital to the work we do. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date 19th May 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible.
Job Title: Senior Combat Systems Engineer Location: Portsmouth Naval Base & Portsmouth Broad Oak - hybrid pattern of 3/4 days on site We offer a range of hybrid and flexible working arrangements - please speak to your recruiter about the options for this particular role Salary: Up to £49,000 depending on skills and experience Who we are: Join BAE Systems and you'll be part of something bigger. As a valued member of our global colleague network, you'll bring your unique skills and perspectives to help pioneer progress and protect what matters most. You'll be trusted to play your part in delivering the advanced, technology-led defence, aerospace and security solutions of tomorrow, shaping a safer future, for all of us. From the depths of the ocean, to the far reaches of space, there's no limit to where a career at BAE Systems could take you. What you'll be doing: Within the Warship Technical Authority, WTA, you will provide engineering support to programmes and projects across Warship Support, including Royal Navy surface ship contracts, international naval support, and internal and external consultancy activity. As a Senior Combat Systems Engineer, you will contribute to delivering core service elements such as design change, technical assurance, material state and obsolescence management , specialist support, and future support planning. You will support technical leadership and wider systems engineering, following agreed training and people management processes. Core duties: Providing combat systems engineering support across a wide range of platforms and programmes, encompassing Combat Management Systems, sensors, effectors, networks and weapons systems, while supporting CSM platforms, non CSM tasks and international naval programmes as directed Supporting assigned project(s) Principal and Senior Engineers liaising with internal and external stakeholders (MOD, Overseas Navies, OEMs and project teams) where requested Assisting with the maintenance platform of systems design integrity across diverse engineering contexts, including pan class and cross programme deployments Supporting structured investigations, impact assessments and integration analyses across platform systems for assigned projects to drive evidence-based decisions as directed by project(s) technical lead(s) Supporting safe, efficient implementation of platform systems design change by supporting maintenance of configuration control and holistic integration across affected domains supporting with collation of evidence for safety case maintenance and Naval Authority/Customer certification submissions Supporting the WTA Combat Systems technical lead for your assigned project(s) and the Hub as directed Essential skills: You will have knowledge of typical UK naval domains with background in combat systems, electrical engineering or munitions Understanding of defence and maritime standards applicable to UK MOD and an awareness for overseas customers. You will demonstrate a sound understanding of the engineering lifecycle Degree qualified or equivalent in Systems/Combat Systems/Electrical Engineering or a related discipline and a commitment to working towards Chartered Engineer (CEng) status The WTA Combat Systems Team: This position sits within the Warship Technical Authority (WTA) Service Hub, part of the Asset Management team within Warship Support. The WTA delivers Naval whole ship, systems and equipment engineering support and change management Why BAE Systems? Here you'll build a career with purpose and limitless possibilities. With lifelong learning and meaningful work, this is a place where you can grow your career with confidence and be empowered to be your best. You'll be recognised for your contribution and enjoy rewards tailored to what's most important to you and your family, support for your financial and personal wellbeing, as well as a balanced lifestyle. In an environment embracing sustainable ways of working and with a strong sense of shared purpose, our supportive culture is a place you can feel you belong and proud of the difference you make. A place where everyone can thrive: We're committed to building an inclusive workplace where everyone feels valued and supported. We know that a diversity of backgrounds, perspectives and experiences strengthens our teams and is vital to the work we do. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date: 14th May 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible.
May 01, 2026
Full time
Job Title: Senior Combat Systems Engineer Location: Portsmouth Naval Base & Portsmouth Broad Oak - hybrid pattern of 3/4 days on site We offer a range of hybrid and flexible working arrangements - please speak to your recruiter about the options for this particular role Salary: Up to £49,000 depending on skills and experience Who we are: Join BAE Systems and you'll be part of something bigger. As a valued member of our global colleague network, you'll bring your unique skills and perspectives to help pioneer progress and protect what matters most. You'll be trusted to play your part in delivering the advanced, technology-led defence, aerospace and security solutions of tomorrow, shaping a safer future, for all of us. From the depths of the ocean, to the far reaches of space, there's no limit to where a career at BAE Systems could take you. What you'll be doing: Within the Warship Technical Authority, WTA, you will provide engineering support to programmes and projects across Warship Support, including Royal Navy surface ship contracts, international naval support, and internal and external consultancy activity. As a Senior Combat Systems Engineer, you will contribute to delivering core service elements such as design change, technical assurance, material state and obsolescence management , specialist support, and future support planning. You will support technical leadership and wider systems engineering, following agreed training and people management processes. Core duties: Providing combat systems engineering support across a wide range of platforms and programmes, encompassing Combat Management Systems, sensors, effectors, networks and weapons systems, while supporting CSM platforms, non CSM tasks and international naval programmes as directed Supporting assigned project(s) Principal and Senior Engineers liaising with internal and external stakeholders (MOD, Overseas Navies, OEMs and project teams) where requested Assisting with the maintenance platform of systems design integrity across diverse engineering contexts, including pan class and cross programme deployments Supporting structured investigations, impact assessments and integration analyses across platform systems for assigned projects to drive evidence-based decisions as directed by project(s) technical lead(s) Supporting safe, efficient implementation of platform systems design change by supporting maintenance of configuration control and holistic integration across affected domains supporting with collation of evidence for safety case maintenance and Naval Authority/Customer certification submissions Supporting the WTA Combat Systems technical lead for your assigned project(s) and the Hub as directed Essential skills: You will have knowledge of typical UK naval domains with background in combat systems, electrical engineering or munitions Understanding of defence and maritime standards applicable to UK MOD and an awareness for overseas customers. You will demonstrate a sound understanding of the engineering lifecycle Degree qualified or equivalent in Systems/Combat Systems/Electrical Engineering or a related discipline and a commitment to working towards Chartered Engineer (CEng) status The WTA Combat Systems Team: This position sits within the Warship Technical Authority (WTA) Service Hub, part of the Asset Management team within Warship Support. The WTA delivers Naval whole ship, systems and equipment engineering support and change management Why BAE Systems? Here you'll build a career with purpose and limitless possibilities. With lifelong learning and meaningful work, this is a place where you can grow your career with confidence and be empowered to be your best. You'll be recognised for your contribution and enjoy rewards tailored to what's most important to you and your family, support for your financial and personal wellbeing, as well as a balanced lifestyle. In an environment embracing sustainable ways of working and with a strong sense of shared purpose, our supportive culture is a place you can feel you belong and proud of the difference you make. A place where everyone can thrive: We're committed to building an inclusive workplace where everyone feels valued and supported. We know that a diversity of backgrounds, perspectives and experiences strengthens our teams and is vital to the work we do. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date: 14th May 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible.
