TIG welders required Good TIG welders will be considered even with no Aviation experience. 37 hour week, early finish on Fridays 18.31 ph, overtime is paid at time and a half. Role Profile-TIG welder This role is a hands-on position that is responsible for the welding of Aviation components. Working to tight tolerances, this position will primarily work on productionised components but should also have the flexibility to work on new product introduction. Key Accountabilities and Responsibilities-TIG welder Participate in a positive and proactive EHS culture across the site. Experience in fitting small diameter tubes for Orbital welding to precise tolerances. Trade qualified with a recognised apprenticeship (City and Guilds etc.) Undertake TIG welding (manual, automatic and Orbital) to aircraft standards to fall in line with welding controls and processes. Read and interpret Engineering drawings. Read, interpret and follow batch cards ensuring that batch card discipline is adhered to at all times. General maintenance of machinery, jigs and fixtures is required to ensure a clean and healthy working environment. Working alongside the Operational team, reduce welding non-conformances and work to best practices. Assist with corrective actions and assist with route cause analysis to prevent issues from re-occurring. Support business improvement initiatives. Person Specification-TIG welder Good knowledge of fusion welding, with at least five years' experience working in the Aviation sector. Experience of working with a variety of materials including exotic metals such as Nickel and Titanium based alloys. Ability to work within in Team environment. Ability to work on own initiative or as part of a wider team. Ability to read, understand and work towards engineering drawings. Ability to communicate in an effective manner to different levels within the organisation.
Apr 28, 2026
Full time
TIG welders required Good TIG welders will be considered even with no Aviation experience. 37 hour week, early finish on Fridays 18.31 ph, overtime is paid at time and a half. Role Profile-TIG welder This role is a hands-on position that is responsible for the welding of Aviation components. Working to tight tolerances, this position will primarily work on productionised components but should also have the flexibility to work on new product introduction. Key Accountabilities and Responsibilities-TIG welder Participate in a positive and proactive EHS culture across the site. Experience in fitting small diameter tubes for Orbital welding to precise tolerances. Trade qualified with a recognised apprenticeship (City and Guilds etc.) Undertake TIG welding (manual, automatic and Orbital) to aircraft standards to fall in line with welding controls and processes. Read and interpret Engineering drawings. Read, interpret and follow batch cards ensuring that batch card discipline is adhered to at all times. General maintenance of machinery, jigs and fixtures is required to ensure a clean and healthy working environment. Working alongside the Operational team, reduce welding non-conformances and work to best practices. Assist with corrective actions and assist with route cause analysis to prevent issues from re-occurring. Support business improvement initiatives. Person Specification-TIG welder Good knowledge of fusion welding, with at least five years' experience working in the Aviation sector. Experience of working with a variety of materials including exotic metals such as Nickel and Titanium based alloys. Ability to work within in Team environment. Ability to work on own initiative or as part of a wider team. Ability to read, understand and work towards engineering drawings. Ability to communicate in an effective manner to different levels within the organisation.
Job Description Job Title: Power Beam Welding Engineer - Submarines Working Pattern: Full time Working location: Derby (Raynesway) What you will be doing: You will influence how electron beam technology affects manufacture of key components that sit within the heart of the Submarines Pressurised Water Reactor system by ensuring the selection of appropriate welding techniques, processes and procedures. With quality, simplification and delivery at the forefront of your mind, you will drive continuous improvement projects from initial concepts to final completion and implementation, liaising with the wider Manufacturing and Engineering teams to collaboratively deliver the right outcomes for the business. Why join Rolls-Royce? At Rolls-Royce we are proud to be a business that has truly helped to shape the modern world and are committed to always being a force for progress; powering, protecting and connecting people everywhere. By joining Rolls-Royce, you'll have the opportunity to work on world-class solutions, supported by a culture that believes individuality is our greatest strength, and all perspectives, experiences and backgrounds help us innovate and enable our high-performance culture. What you will be doing: With this exciting opportunity you will get a chance to be involved with the following: Using your existing Electron beam or Laser welding knowledge to develop Welds in complex assemblies and take them through Qualification, Production implementation and improvement. Drive continuous improvement projects from initial concepts to final completion and implementation Play a key role in ensuring an uninterrupted manufacturing plant. Support a mixture of emergent shop floor issues, from product non-conformance, root cause investigations and cell performance, to supporting welders and managing Welder Qualifications in line with industry and internal standards Support manufacturing meetings and reviews with the goal of ensuring SQCDP metrics are on target and in line with business requirements. Liaising with the wider Manufacturing and Engineering teams to provide expertise and knowledge is vital within this role. Who we're looking for: At Rolls-Royce embrace agility, are bold, pursue collaboration and seek simplicity in everything we do. These principles form our values and behaviours and are an essential component of our assessment process and are fundamental qualities that we seek for all roles. To be successful in this role you will need to meet the following criteria: Prior experience in electron beam or laser processing (welding, additive manufacture, cladding, cutting/drilling). Strong analytical capability and sound judgement; broad technical background. Experience with special processes such as welding, NDE, or heat treatment. Proven ability to conduct root cause investigations involving fundamental process data as well as consideration of human factors. Competence in developing special process data cards and implementing associated process controls. Experience working with high-integrity products in highly regulated industries. Awareness of and commitment to product safety. Professionally Qualified Engineer (e.g. UK minimum HND/foundation degree or other national equivalent) in an engineering discipline. Desirable skills and experience: Professional welding qualifications (e.g. International Institute of Welding (IIW) / European Welding Federation (EWF) Welding Engineer or Technologist status, IEng or Ceng status, NVQ in welding, MSc Welding Engineering) For more than 60 years Rolls-Royce Submarines has designed, supplied and supported the nuclear propulsion plant, providing power for all UK Royal Navy nuclear submarines. To work for Rolls-Royce Submarines an individual must hold a Security Check clearance. We will support the application for Security Clearance if you don't already have it. Due to the nature of work we conduct, we can only progress applications from individuals who are a UK national or, in MoD approved cases, a dual national. Our vision is to ensure that the excellence and ingenuity that shaped our history continues into our future. Our multi-year transformation programme aims to turn Rolls-Royce into a high-performing, competitive, resilient and growing company. Join us, and it can be your future vision too. Rolls-Royce are committed to being a respectful, inclusive, and non-discriminatory workplace where individuality is valued, diverse perspectives fuel innovation, and everyone can thrive. As part of our selection process, candidates in certain locations may be asked to complete an online assessment, which can include cognitive and behavioural aptitude testing relevant to the role. If required, full instructions for the next steps will be provided. Job Category Manufacturing Engineering Posting Date 22 Apr 2026; 00:04 Posting End Date 05 May 2026PandoLogic.
Apr 28, 2026
Full time
Job Description Job Title: Power Beam Welding Engineer - Submarines Working Pattern: Full time Working location: Derby (Raynesway) What you will be doing: You will influence how electron beam technology affects manufacture of key components that sit within the heart of the Submarines Pressurised Water Reactor system by ensuring the selection of appropriate welding techniques, processes and procedures. With quality, simplification and delivery at the forefront of your mind, you will drive continuous improvement projects from initial concepts to final completion and implementation, liaising with the wider Manufacturing and Engineering teams to collaboratively deliver the right outcomes for the business. Why join Rolls-Royce? At Rolls-Royce we are proud to be a business that has truly helped to shape the modern world and are committed to always being a force for progress; powering, protecting and connecting people everywhere. By joining Rolls-Royce, you'll have the opportunity to work on world-class solutions, supported by a culture that believes individuality is our greatest strength, and all perspectives, experiences and backgrounds help us innovate and enable our high-performance culture. What you will be doing: With this exciting opportunity you will get a chance to be involved with the following: Using your existing Electron beam or Laser welding knowledge to develop Welds in complex assemblies and take them through Qualification, Production implementation and improvement. Drive continuous improvement projects from initial concepts to final completion and implementation Play a key role in ensuring an uninterrupted manufacturing plant. Support a mixture of emergent shop floor issues, from product non-conformance, root cause investigations and cell performance, to supporting welders and managing Welder Qualifications in line with industry and internal standards Support manufacturing meetings and reviews with the goal of ensuring SQCDP metrics are on target and in line with business requirements. Liaising with the wider Manufacturing and Engineering teams to provide expertise and knowledge is vital within this role. Who we're looking for: At Rolls-Royce embrace agility, are bold, pursue collaboration and seek simplicity in everything we do. These principles form our values and behaviours and are an essential component of our assessment process and are fundamental qualities that we seek for all roles. To be successful in this role you will need to meet the following criteria: Prior experience in electron beam or laser processing (welding, additive manufacture, cladding, cutting/drilling). Strong analytical capability and sound judgement; broad technical background. Experience with special processes such as welding, NDE, or heat treatment. Proven ability to conduct root cause investigations involving fundamental process data as well as consideration of human factors. Competence in developing special process data cards and implementing associated process controls. Experience working with high-integrity products in highly regulated industries. Awareness of and commitment to product safety. Professionally Qualified Engineer (e.g. UK minimum HND/foundation degree or other national equivalent) in an engineering discipline. Desirable skills and experience: Professional welding qualifications (e.g. International Institute of Welding (IIW) / European Welding Federation (EWF) Welding Engineer or Technologist status, IEng or Ceng status, NVQ in welding, MSc Welding Engineering) For more than 60 years Rolls-Royce Submarines has designed, supplied and supported the nuclear propulsion plant, providing power for all UK Royal Navy nuclear submarines. To work for Rolls-Royce Submarines an individual must hold a Security Check clearance. We will support the application for Security Clearance if you don't already have it. Due to the nature of work we conduct, we can only progress applications from individuals who are a UK national or, in MoD approved cases, a dual national. Our vision is to ensure that the excellence and ingenuity that shaped our history continues into our future. Our multi-year transformation programme aims to turn Rolls-Royce into a high-performing, competitive, resilient and growing company. Join us, and it can be your future vision too. Rolls-Royce are committed to being a respectful, inclusive, and non-discriminatory workplace where individuality is valued, diverse perspectives fuel innovation, and everyone can thrive. As part of our selection process, candidates in certain locations may be asked to complete an online assessment, which can include cognitive and behavioural aptitude testing relevant to the role. If required, full instructions for the next steps will be provided. Job Category Manufacturing Engineering Posting Date 22 Apr 2026; 00:04 Posting End Date 05 May 2026PandoLogic.
Fabricator / Welder (Full-Time) Location: Livingston I am working with my client who is an internationally recognised leader within the food processing industry, operating across more than 100 countries worldwide. Due to continued growth, they are seeking experienced Fabricator/Welders to join their team, on a permanent basis. The Role This is a hands-on position involving a wide range of fabrication work including general sheet metalwork, light fabrications, and pipework-primarily in steel and stainless steel. Every project is different, and you will be responsible for managing jobs from start to finish, working both independently and as part of a team. You will be expected to : Work from detailed fabrication and engineering drawings where available Accurately measure and work within tight tolerances Perform high-quality MIG and TIG welding Use hand and air tools (e.g. grinders) competently Maintain a clean and organised work area Support the Production Team with additional tasks as required Adapt to bespoke projects, including working from sketches or improvising solutions where necessary Skills & Experience Required Proven ability to read and interpret engineering and fabrication drawings Strong MIG and TIG welding skills (essential) Experience working with stainless steel Minimum 1 year's experience in sheet metal and fabrication Time-served or equivalent practical experience Strong communication skills and a proactive, problem-solving approach Ability to work both independently and collaboratively Assessment All successful candidates will be required to complete a weld test prior to starting. This will be arranged either on the day of interview or at a mutually convenient time. Working Hours & Benefits 38 hours per week (Monday-Thursday only) Overtime available when required 26.5 days paid annual leave (pro rata) If you are a skilled Fabricator/Welder looking for your next opportunity in a dynamic and varied environment, we would like to hear from you - apply today! Search is an equal opportunities recruiter and we welcome applications from all suitably skilled or qualified applicants, regardless of their race, sex, disability, religion/beliefs, sexual orientation or age.
Apr 28, 2026
Full time
Fabricator / Welder (Full-Time) Location: Livingston I am working with my client who is an internationally recognised leader within the food processing industry, operating across more than 100 countries worldwide. Due to continued growth, they are seeking experienced Fabricator/Welders to join their team, on a permanent basis. The Role This is a hands-on position involving a wide range of fabrication work including general sheet metalwork, light fabrications, and pipework-primarily in steel and stainless steel. Every project is different, and you will be responsible for managing jobs from start to finish, working both independently and as part of a team. You will be expected to : Work from detailed fabrication and engineering drawings where available Accurately measure and work within tight tolerances Perform high-quality MIG and TIG welding Use hand and air tools (e.g. grinders) competently Maintain a clean and organised work area Support the Production Team with additional tasks as required Adapt to bespoke projects, including working from sketches or improvising solutions where necessary Skills & Experience Required Proven ability to read and interpret engineering and fabrication drawings Strong MIG and TIG welding skills (essential) Experience working with stainless steel Minimum 1 year's experience in sheet metal and fabrication Time-served or equivalent practical experience Strong communication skills and a proactive, problem-solving approach Ability to work both independently and collaboratively Assessment All successful candidates will be required to complete a weld test prior to starting. This will be arranged either on the day of interview or at a mutually convenient time. Working Hours & Benefits 38 hours per week (Monday-Thursday only) Overtime available when required 26.5 days paid annual leave (pro rata) If you are a skilled Fabricator/Welder looking for your next opportunity in a dynamic and varied environment, we would like to hear from you - apply today! Search is an equal opportunities recruiter and we welcome applications from all suitably skilled or qualified applicants, regardless of their race, sex, disability, religion/beliefs, sexual orientation or age.
GREAT OPPORTUNITY Long term welding work based near Hull. Work involves producing modular frames and fabrication of Large structural frames from detailed drawings. Work could include welding of galvanised steel. Long term work for the right candidates. Very nice and friendly company to work for. 38 Hours per week (starting at 16 per hour) and overtime available at time and half - ALL TEMP - PERM contracts
Apr 28, 2026
Contractor
GREAT OPPORTUNITY Long term welding work based near Hull. Work involves producing modular frames and fabrication of Large structural frames from detailed drawings. Work could include welding of galvanised steel. Long term work for the right candidates. Very nice and friendly company to work for. 38 Hours per week (starting at 16 per hour) and overtime available at time and half - ALL TEMP - PERM contracts
What we offer: Fixed Working Hours : 37.5 hours per week across a 3-shift rotation with overtime opportunities Nights : Sunday - Thursday, 10:00pm - 6:00am Days : Monday - Friday, 6:00am - 2:00pm Backs : Monday - Thursday, 2:00pm - 10:00pm & Friday, 2:00pm - 7:10pm Supportive environment : Work with a team that values collaboration and respect. Development opportunities : Continuous learning and skills training to help you grow. Salary : £32,514 per annum, increasing to £34,226 after 12 months plus shift allowance Benefits you'll enjoy: Competitive hourly pay and overtime opportunities Health & Wellbeing support: Access to employee assistance programs Onsite Occupational Health including nurse and physiotherapy services Employee Rewards & Discount Program Employee Bonus scheme linked to Company performance Paid holidays and pension contributions Training and career progression within a global company On-site facilities including free gym RESPONSIBILITIES Your impact: Keep work areas organised and safe. Safely and efficiently assemble world class engines. Perform quality checks and maintain high standards. Contribute to process improvements and problem-solving. What we're looking for: A proactive approach to safety and quality. Strong communication and teamwork skills. Ability to meet production targets with confidence. QUALIFICATIONS Experience: Must have a recognized MIG welding qualification i.e. NVQ Level 3 Fabrication and Welding. Must have recent, relevant experience of MIG welding in a manufacturing or fabrication organization. If you're ready to join a company that values your voice, your ideas, and your growth, apply today and be part of something bigger.
Apr 28, 2026
Full time
What we offer: Fixed Working Hours : 37.5 hours per week across a 3-shift rotation with overtime opportunities Nights : Sunday - Thursday, 10:00pm - 6:00am Days : Monday - Friday, 6:00am - 2:00pm Backs : Monday - Thursday, 2:00pm - 10:00pm & Friday, 2:00pm - 7:10pm Supportive environment : Work with a team that values collaboration and respect. Development opportunities : Continuous learning and skills training to help you grow. Salary : £32,514 per annum, increasing to £34,226 after 12 months plus shift allowance Benefits you'll enjoy: Competitive hourly pay and overtime opportunities Health & Wellbeing support: Access to employee assistance programs Onsite Occupational Health including nurse and physiotherapy services Employee Rewards & Discount Program Employee Bonus scheme linked to Company performance Paid holidays and pension contributions Training and career progression within a global company On-site facilities including free gym RESPONSIBILITIES Your impact: Keep work areas organised and safe. Safely and efficiently assemble world class engines. Perform quality checks and maintain high standards. Contribute to process improvements and problem-solving. What we're looking for: A proactive approach to safety and quality. Strong communication and teamwork skills. Ability to meet production targets with confidence. QUALIFICATIONS Experience: Must have a recognized MIG welding qualification i.e. NVQ Level 3 Fabrication and Welding. Must have recent, relevant experience of MIG welding in a manufacturing or fabrication organization. If you're ready to join a company that values your voice, your ideas, and your growth, apply today and be part of something bigger.
MIG Welder Location: Brierley Hill Pay Rate: £13.50 Hours: Monday to Friday 8am-4.30pm We are recruiting on behalf of a well-established manufacturing client based in the Brierley Hill area, currently looking to add an experienced MIG Welder to their team click apply for full job details
Apr 28, 2026
Seasonal
MIG Welder Location: Brierley Hill Pay Rate: £13.50 Hours: Monday to Friday 8am-4.30pm We are recruiting on behalf of a well-established manufacturing client based in the Brierley Hill area, currently looking to add an experienced MIG Welder to their team click apply for full job details
MIG Welder / Fabricator Monday Friday 8AM - 5PM 18-Month Fixed-Term Contract Salary £33,000 per annum Our client, a well-established and respected engineering business, is seeking an experienced Mild Steel MIG Welder / Fabricator to join their team on an 18-month fixed-term contract click apply for full job details
Apr 28, 2026
Full time
MIG Welder / Fabricator Monday Friday 8AM - 5PM 18-Month Fixed-Term Contract Salary £33,000 per annum Our client, a well-established and respected engineering business, is seeking an experienced Mild Steel MIG Welder / Fabricator to join their team on an 18-month fixed-term contract click apply for full job details
MIG Welder / Fabricator Daventry, Northamptonshire £15.00-£17.00 an hour Mon-Thurs (08:00-17:00) Fri (08:00-13:00) Are you an experienced MIG Welder/Fabricator looking to work on high-quality, safety-critical components within a stable and supportive environment? We're recruiting for a MIG Welder/Fabricator to join a well-established, family-run manufacturing business in Daventry click apply for full job details
Apr 27, 2026
Full time
MIG Welder / Fabricator Daventry, Northamptonshire £15.00-£17.00 an hour Mon-Thurs (08:00-17:00) Fri (08:00-13:00) Are you an experienced MIG Welder/Fabricator looking to work on high-quality, safety-critical components within a stable and supportive environment? We're recruiting for a MIG Welder/Fabricator to join a well-established, family-run manufacturing business in Daventry click apply for full job details
MIG Welder Stourbridge Temp to Perm Opportunity Working Hours: Monday to Thursday: 8am 4:30pm Friday: 8am 4pm Pay Rate: £14.00 £14.50 per hour (dependent on experience) We are currently recruiting on behalf of a manufacturing company based in Stourbridge click apply for full job details
Apr 27, 2026
Seasonal
MIG Welder Stourbridge Temp to Perm Opportunity Working Hours: Monday to Thursday: 8am 4:30pm Friday: 8am 4pm Pay Rate: £14.00 £14.50 per hour (dependent on experience) We are currently recruiting on behalf of a manufacturing company based in Stourbridge click apply for full job details
We are seeking a skilled Press Brake Operator and TIG Welder to join our dynamic team. The ideal candidate will have a strong mechanical aptitude and experience in operating press brake machinery to fabricate and assemble sheet metal components. This role is essential in ensuring the production of high-quality products while adhering to safety standards and efficiency guidelines. Key Responsibilities TIG Weld Light Gauge metal. Operate press brake machinery to bend, form, and shape sheet metal according to specifications. Fabricate components by reading and interpreting technical drawings and blueprints. Conduct routine maintenance on machinery and tooling to ensure optimal performance. Collaborate with team members to troubleshoot issues and improve production processes. Maintain a clean and organised work environment, adhering to health and safety regulations. Qualifications & Experience Proven experience as a Press Brake Operator or in a similar role within a manufacturing environment. Strong mechanical knowledge with the ability to operate various types of machinery effectively. Familiarity with tooling, fabrication techniques, and sheet metal processes. Proficient in basic maths for measurements and calculations related to fabrication tasks. Ability to work with hand tools safely and efficiently. Excellent attention to detail with a commitment to producing high-quality work. Strong problem-solving skills and the ability to work independently or as part of a team. If you are passionate about manufacturing and possess the necessary skills, we encourage you to apply for this exciting opportunity as a Press Brake Operator. Market 36 Recruitment Ltd cover a range of sectors including Commercial, Industrial, Engineering, HR & Finance & ITAD. This vacancy is being advertised by Market 36 Recruitment Ltd. We operate as an Employment Business for temporary roles and as an Employment Agency for permanent roles.
Apr 27, 2026
Full time
We are seeking a skilled Press Brake Operator and TIG Welder to join our dynamic team. The ideal candidate will have a strong mechanical aptitude and experience in operating press brake machinery to fabricate and assemble sheet metal components. This role is essential in ensuring the production of high-quality products while adhering to safety standards and efficiency guidelines. Key Responsibilities TIG Weld Light Gauge metal. Operate press brake machinery to bend, form, and shape sheet metal according to specifications. Fabricate components by reading and interpreting technical drawings and blueprints. Conduct routine maintenance on machinery and tooling to ensure optimal performance. Collaborate with team members to troubleshoot issues and improve production processes. Maintain a clean and organised work environment, adhering to health and safety regulations. Qualifications & Experience Proven experience as a Press Brake Operator or in a similar role within a manufacturing environment. Strong mechanical knowledge with the ability to operate various types of machinery effectively. Familiarity with tooling, fabrication techniques, and sheet metal processes. Proficient in basic maths for measurements and calculations related to fabrication tasks. Ability to work with hand tools safely and efficiently. Excellent attention to detail with a commitment to producing high-quality work. Strong problem-solving skills and the ability to work independently or as part of a team. If you are passionate about manufacturing and possess the necessary skills, we encourage you to apply for this exciting opportunity as a Press Brake Operator. Market 36 Recruitment Ltd cover a range of sectors including Commercial, Industrial, Engineering, HR & Finance & ITAD. This vacancy is being advertised by Market 36 Recruitment Ltd. We operate as an Employment Business for temporary roles and as an Employment Agency for permanent roles.
TIG Welder South Leicester Permanent 2-Shift Rotation £18.92/hr + Bonus & Overtime Immediate Start Join agrowing, precision component manufacturerwith a strong reputation inaerospace and power generation. Work on components ranging from small aerospace parts to large industrial gas turbines, withexcellent training, pay progression, and career prospects click apply for full job details
Apr 27, 2026
Full time
TIG Welder South Leicester Permanent 2-Shift Rotation £18.92/hr + Bonus & Overtime Immediate Start Join agrowing, precision component manufacturerwith a strong reputation inaerospace and power generation. Work on components ranging from small aerospace parts to large industrial gas turbines, withexcellent training, pay progression, and career prospects click apply for full job details
Role : TIG Welder Start Date : Immediate Start Hours : Monday to Friday, 08:00 - 17:00 Location : Outskirts of Bury St Edmunds, Suffolk (own transport required) Pay : 18.00 p/hour (DOE, negotiable based on experience) Contract : Temp to Perm OVERTIME REGULARLY AVAILABLE AT ENHANCED RATES OF PAY! We are recruiting a TIG Welder to join a small, specialist engineering firm in Bury St Edmunds, Suffolk. The company produces high-quality architectural metalwork, working on both bespoke one-off pieces and larger batch orders. This is a hands-on fabrication role requiring a flexible and adaptable approach to varied work. Duties : TIG welding a range of architectural metalwork components Fabricating and assembling bespoke and batch-produced items Cutting, grinding, drilling, tapping, bending, and fettling materials Operating workshop machinery (desirable but not essential) Reading and working from engineering drawings Ensuring all work meets required quality and finish standards Maintaining a clean and safe working environment Skills & Requirements: Proven TIG welding and fabrication experience Ability to read and interpret engineering drawings Strong all-round metalwork and finishing skills Flexible approach to varied, custom-based work High attention to detail and quality Able to work independently and as part of a small team Must have own transport due to rural location Pay & Hours: 18.00 p/hour (depending on experience) Monday to Friday, 08:00 - 17:00 40-hour working week Overtime available at enhanced rates Temporary to permanent opportunity Potential pay review after 3 months If you are an experienced TIG Welder looking for a varied and hands-on role within a specialist engineering environment, apply today or contact Appointments for more information.
Apr 27, 2026
Seasonal
Role : TIG Welder Start Date : Immediate Start Hours : Monday to Friday, 08:00 - 17:00 Location : Outskirts of Bury St Edmunds, Suffolk (own transport required) Pay : 18.00 p/hour (DOE, negotiable based on experience) Contract : Temp to Perm OVERTIME REGULARLY AVAILABLE AT ENHANCED RATES OF PAY! We are recruiting a TIG Welder to join a small, specialist engineering firm in Bury St Edmunds, Suffolk. The company produces high-quality architectural metalwork, working on both bespoke one-off pieces and larger batch orders. This is a hands-on fabrication role requiring a flexible and adaptable approach to varied work. Duties : TIG welding a range of architectural metalwork components Fabricating and assembling bespoke and batch-produced items Cutting, grinding, drilling, tapping, bending, and fettling materials Operating workshop machinery (desirable but not essential) Reading and working from engineering drawings Ensuring all work meets required quality and finish standards Maintaining a clean and safe working environment Skills & Requirements: Proven TIG welding and fabrication experience Ability to read and interpret engineering drawings Strong all-round metalwork and finishing skills Flexible approach to varied, custom-based work High attention to detail and quality Able to work independently and as part of a small team Must have own transport due to rural location Pay & Hours: 18.00 p/hour (depending on experience) Monday to Friday, 08:00 - 17:00 40-hour working week Overtime available at enhanced rates Temporary to permanent opportunity Potential pay review after 3 months If you are an experienced TIG Welder looking for a varied and hands-on role within a specialist engineering environment, apply today or contact Appointments for more information.
Fabricator / Welder Location: Barton upon Humber Salary: £48,000 + Overtime + Excellent Benefits The Business An excellent opportunity has arisen for a Fabricator / Welder to join a leading bulk terminal and port logistics operation. Major UK port group handling millions of tonnes of cargo annually Key player supporting energy, construction, manufacturing and agriculture sectors Ongoing investment in engineering, infrastructure and equipment Stable, long-term environment within a critical UK industry The Role of the Fabricator / Welder The Fabricator / Welder will carry out fabrication, welding and maintenance across heavy industrial plant and bulk handling equipment. Fabrication and welding of structural components, platforms, walkways and handrails Repair and manufacture of loading shovel buckets and plant components Cutting out and replacing floors, sides and worn sections of equipment Measuring, marking out and producing components from drawings Working on conveyors, elevators, pipework and associated plant Use of MIG and Stick welding, plasma cutting and oxy fuel burning equipment Supporting maintenance and breakdown activities across site Working at height and within a heavy industrial environment Requirements of the Fabricator / Welder Essential: Minimum Level 3 qualification in Fabrication and Welding At least 3 years experience in a heavy industrial environment Strong experience in MIG and Stick (MMA) welding Competent in basic fabrication, marking out and reading drawings Experience working with carbon steel and pipework Comfortable working at height Good understanding of structural and plant based fabrication Must be flexible to work occasional weekends in line with operational requirements Desirable: Welding codings (beneficial) Experience in plating and heavy fabrication Background in quarrying, oil & gas, mining or similar industries Experience with conveyors, elevators and bulk handling systems Slinging, rigging or overhead crane experience IPAF or other plant tickets Benefits of the Fabricator / Welder Tonnage bonus 27 days holiday plus bank holidays 10% employer pension contribution Healthcare cash plan Critical illness cover Employee assistance programme Salary sacrifice car scheme Life assurance Travel insurance If you would like to find out more, please get in touch with Adele Lewis: Mobile: (phone number removed) Office: (phone number removed) (url removed) ASPLIV
Apr 27, 2026
Full time
Fabricator / Welder Location: Barton upon Humber Salary: £48,000 + Overtime + Excellent Benefits The Business An excellent opportunity has arisen for a Fabricator / Welder to join a leading bulk terminal and port logistics operation. Major UK port group handling millions of tonnes of cargo annually Key player supporting energy, construction, manufacturing and agriculture sectors Ongoing investment in engineering, infrastructure and equipment Stable, long-term environment within a critical UK industry The Role of the Fabricator / Welder The Fabricator / Welder will carry out fabrication, welding and maintenance across heavy industrial plant and bulk handling equipment. Fabrication and welding of structural components, platforms, walkways and handrails Repair and manufacture of loading shovel buckets and plant components Cutting out and replacing floors, sides and worn sections of equipment Measuring, marking out and producing components from drawings Working on conveyors, elevators, pipework and associated plant Use of MIG and Stick welding, plasma cutting and oxy fuel burning equipment Supporting maintenance and breakdown activities across site Working at height and within a heavy industrial environment Requirements of the Fabricator / Welder Essential: Minimum Level 3 qualification in Fabrication and Welding At least 3 years experience in a heavy industrial environment Strong experience in MIG and Stick (MMA) welding Competent in basic fabrication, marking out and reading drawings Experience working with carbon steel and pipework Comfortable working at height Good understanding of structural and plant based fabrication Must be flexible to work occasional weekends in line with operational requirements Desirable: Welding codings (beneficial) Experience in plating and heavy fabrication Background in quarrying, oil & gas, mining or similar industries Experience with conveyors, elevators and bulk handling systems Slinging, rigging or overhead crane experience IPAF or other plant tickets Benefits of the Fabricator / Welder Tonnage bonus 27 days holiday plus bank holidays 10% employer pension contribution Healthcare cash plan Critical illness cover Employee assistance programme Salary sacrifice car scheme Life assurance Travel insurance If you would like to find out more, please get in touch with Adele Lewis: Mobile: (phone number removed) Office: (phone number removed) (url removed) ASPLIV
Welder (Friday's Off) Truro £15.07 Per Hour + Career Progression + Overtime + PPE + Company Benefits/Bonus + 4-Day Working Week Are you a Welder or similar, looking for an exciting role within a successful and well-established company that provides a manageable working week through sociable hours and a 4-day working week with Friday's off, with the option to work Fridays for overtime rates? Do you wan click apply for full job details
Apr 26, 2026
Full time
Welder (Friday's Off) Truro £15.07 Per Hour + Career Progression + Overtime + PPE + Company Benefits/Bonus + 4-Day Working Week Are you a Welder or similar, looking for an exciting role within a successful and well-established company that provides a manageable working week through sociable hours and a 4-day working week with Friday's off, with the option to work Fridays for overtime rates? Do you wan click apply for full job details
Job Title Mechanical Supervisor (Boiler Installation Bias) Location Various - Nationwide Project Type New Build Industrial Project Mechanical & Boiler Installation Employment Type 12-18 month contract Pay Rate TBC Position Overview The Mechanical Supervisor will oversee the installation and coordination of all mechanical systems associated with boiler installation and auxiliary plant equipment on a new-build industrial facility. The role requires a strong background in heavy mechanical installation, with a specific focus on boilers, pressure parts, pipework, and associated mechanical systems. Key Responsibilities Supervise and coordinate mechanical installation activities related to boiler systems, pressure parts, ducting, pipework, pumps, and associated mechanical assemblies. Ensure all installation works are executed in line with project specifications, engineering drawings, and quality standards. Lead and manage mechanical fitters, welders, and rigging crews to ensure safe, efficient progress in line with the construction schedule. Oversee pre-fabrication, lifting, alignment, and installation of major mechanical components. Ensure all works comply with site safety procedures, risk assessments, and method statements. Liaise closely with the engineering and QA/QC teams to ensure mechanical systems are installed to the required standards and tolerances. Supervise pressure testing, flushing, and commissioning preparation works. Coordinate with other trades (electrical, structural, and civil) to maintain smooth interface management. Conduct daily briefings, toolbox talks, and ensure that all personnel under supervision are fully aware of their duties and safety responsibilities. Monitor productivity, report progress, and contribute to short-term planning and lookahead schedules. Maintain accurate site records, inspection documentation, and ensure all quality assurance paperwork is completed. Requirements Proven experience as a Mechanical Supervisor on large-scale industrial or energy sector projects (e.g., power generation, process plants, refineries). Strong background in boiler installation, pressure part assembly, and heavy mechanical installation works. Sound knowledge of mechanical systems, pressure equipment, and relevant installation standards (e.g., BS EN, ASME). Excellent leadership and communication skills, with the ability to coordinate multi-disciplinary teams. Strong focus on safety, quality, and efficiency. Up-to-date certifications including: CSCS Gold/Black Card (Supervisory Level) SSSTS or SMSTS Confined Space and Working at Height (desirable) First Aid at Work (preferred) Pressure Systems awareness (desirable) Additional Qualifications Ability to read and interpret mechanical drawings, isometrics, and P&IDs. Experience overseeing heavy lifts, pressure testing, and mechanical commissioning activities.
Apr 26, 2026
Full time
Job Title Mechanical Supervisor (Boiler Installation Bias) Location Various - Nationwide Project Type New Build Industrial Project Mechanical & Boiler Installation Employment Type 12-18 month contract Pay Rate TBC Position Overview The Mechanical Supervisor will oversee the installation and coordination of all mechanical systems associated with boiler installation and auxiliary plant equipment on a new-build industrial facility. The role requires a strong background in heavy mechanical installation, with a specific focus on boilers, pressure parts, pipework, and associated mechanical systems. Key Responsibilities Supervise and coordinate mechanical installation activities related to boiler systems, pressure parts, ducting, pipework, pumps, and associated mechanical assemblies. Ensure all installation works are executed in line with project specifications, engineering drawings, and quality standards. Lead and manage mechanical fitters, welders, and rigging crews to ensure safe, efficient progress in line with the construction schedule. Oversee pre-fabrication, lifting, alignment, and installation of major mechanical components. Ensure all works comply with site safety procedures, risk assessments, and method statements. Liaise closely with the engineering and QA/QC teams to ensure mechanical systems are installed to the required standards and tolerances. Supervise pressure testing, flushing, and commissioning preparation works. Coordinate with other trades (electrical, structural, and civil) to maintain smooth interface management. Conduct daily briefings, toolbox talks, and ensure that all personnel under supervision are fully aware of their duties and safety responsibilities. Monitor productivity, report progress, and contribute to short-term planning and lookahead schedules. Maintain accurate site records, inspection documentation, and ensure all quality assurance paperwork is completed. Requirements Proven experience as a Mechanical Supervisor on large-scale industrial or energy sector projects (e.g., power generation, process plants, refineries). Strong background in boiler installation, pressure part assembly, and heavy mechanical installation works. Sound knowledge of mechanical systems, pressure equipment, and relevant installation standards (e.g., BS EN, ASME). Excellent leadership and communication skills, with the ability to coordinate multi-disciplinary teams. Strong focus on safety, quality, and efficiency. Up-to-date certifications including: CSCS Gold/Black Card (Supervisory Level) SSSTS or SMSTS Confined Space and Working at Height (desirable) First Aid at Work (preferred) Pressure Systems awareness (desirable) Additional Qualifications Ability to read and interpret mechanical drawings, isometrics, and P&IDs. Experience overseeing heavy lifts, pressure testing, and mechanical commissioning activities.
Job Description Fabricator Welder Jobs in Andover at Stannah - Join Our Team! We have an exciting opportunity for a Fabricator Welder to join Stannah based at Andover. This is a permanent, full time position working Monday to Thursday 21:00 to 06:45, during these hours you will receive a 33% shift allowance. As a Fabricator Welder, you will be responsible for joining metal using a MAG welding technique to create the finished product. Your duties will include cutting and welding materials according to technical drawings created by our Rail Design Team. This is a great opportunity for a skilled Fabricator Welder looking to work in a dynamic environment. You will play a key role in ensuring our products meet the highest quality standards before reaching the next stage of production. To be successful as a Fabricator Welder, it is essential that you have previous experience in welding. Experience in reading technical drawings would be desirable. Fabricator Welder Responsibilities: Read and interpret product drawings to complete jobs within specifications. Deliver high-quality products while maintaining safety and quality standards. Work flexibly within a team environment to meet business needs. Ensure excellent housekeeping and compliance with safety guidelines. Please see the full job description here: Fabricator Welder Job Description Qualifications Fabricator Welder Requirements: Ability to read and work from technical drawings. Skilled in welding, polishing, and working with fine tolerances. Experience with Oxy-Acetylene heating equipment and digital bevel gauges. Strong commitment to a right first time (RFT) ethos and continuous improvement. Additional Information If you have previous experience working as a Fabricator Welder or Welder in a similar role and are looking for a new opportunity in Andover, click the "Apply Now" button or contact us for further information. Benefits Include: Competitive Salary, paid on a monthly basis Profit Share Bonus Scheme - a proportion of Company earnings shared equally between all employees and paid out at regular intervals 25 days holiday, plus bank holidays, with the option to purchase an additional 5 days Pension Scheme, matched contribution/salary sacrifice SimplyHealth Cash Plan which allows you to claim towards health costs such as dental and optical as well as physiotherapy, chiropody and flu vaccinations Life Assurance Scheme Long Service award scheme, with additional holiday benefit Company Benefits Discount and Rewards Scheme which includes shop discounts, hotel discounts, days out and more Employee Assistance Programme Company Sick Pay Enhanced maternity and paternity provision Free onsite parking Stannah Group is an equal opportunities employer. We welcome and encourage applications from candidates of all backgrounds, identities, and abilities. We are a Disability Confident Committed Employer. We treat all our job applicants fairly and with respect. Our employees are the heart of our business. We take great care to create a working environment where everyone feels valued. Join our team and be a part of our diverse and inclusive community! We reserve the right to close this vacancy early if we receive high numbers of applications for the role. Appropriate right to work must be held by applicants. Sponsorship is not available. PandoLogic.
Apr 26, 2026
Full time
Job Description Fabricator Welder Jobs in Andover at Stannah - Join Our Team! We have an exciting opportunity for a Fabricator Welder to join Stannah based at Andover. This is a permanent, full time position working Monday to Thursday 21:00 to 06:45, during these hours you will receive a 33% shift allowance. As a Fabricator Welder, you will be responsible for joining metal using a MAG welding technique to create the finished product. Your duties will include cutting and welding materials according to technical drawings created by our Rail Design Team. This is a great opportunity for a skilled Fabricator Welder looking to work in a dynamic environment. You will play a key role in ensuring our products meet the highest quality standards before reaching the next stage of production. To be successful as a Fabricator Welder, it is essential that you have previous experience in welding. Experience in reading technical drawings would be desirable. Fabricator Welder Responsibilities: Read and interpret product drawings to complete jobs within specifications. Deliver high-quality products while maintaining safety and quality standards. Work flexibly within a team environment to meet business needs. Ensure excellent housekeeping and compliance with safety guidelines. Please see the full job description here: Fabricator Welder Job Description Qualifications Fabricator Welder Requirements: Ability to read and work from technical drawings. Skilled in welding, polishing, and working with fine tolerances. Experience with Oxy-Acetylene heating equipment and digital bevel gauges. Strong commitment to a right first time (RFT) ethos and continuous improvement. Additional Information If you have previous experience working as a Fabricator Welder or Welder in a similar role and are looking for a new opportunity in Andover, click the "Apply Now" button or contact us for further information. Benefits Include: Competitive Salary, paid on a monthly basis Profit Share Bonus Scheme - a proportion of Company earnings shared equally between all employees and paid out at regular intervals 25 days holiday, plus bank holidays, with the option to purchase an additional 5 days Pension Scheme, matched contribution/salary sacrifice SimplyHealth Cash Plan which allows you to claim towards health costs such as dental and optical as well as physiotherapy, chiropody and flu vaccinations Life Assurance Scheme Long Service award scheme, with additional holiday benefit Company Benefits Discount and Rewards Scheme which includes shop discounts, hotel discounts, days out and more Employee Assistance Programme Company Sick Pay Enhanced maternity and paternity provision Free onsite parking Stannah Group is an equal opportunities employer. We welcome and encourage applications from candidates of all backgrounds, identities, and abilities. We are a Disability Confident Committed Employer. We treat all our job applicants fairly and with respect. Our employees are the heart of our business. We take great care to create a working environment where everyone feels valued. Join our team and be a part of our diverse and inclusive community! We reserve the right to close this vacancy early if we receive high numbers of applications for the role. Appropriate right to work must be held by applicants. Sponsorship is not available. PandoLogic.
Job Description Fabricator Welder Jobs in Andover at Stannah - Join Our Team! We have an exciting opportunity for a Fabricator Welder to join Stannah based at Andover. This is a permanent, full time position working Monday to Thursday 07:00 to 16:45. As a Fabricator Welder, you will be responsible for joining metal using a MAG welding technique to create the finished product. Your duties will include cutting and welding materials according to technical drawings created by our Rail Design Team. This is a great opportunity for a skilled Fabricator Welder looking to work in a dynamic environment. You will play a key role in ensuring our products meet the highest quality standards before reaching the next stage of production. To be successful as a Fabricator Welder, it is essential that you have previous experience in welding. Experience in reading technical drawings would be desirable. Fabricator Welder Responsibilities: Read and interpret product drawings to complete jobs within specifications. Deliver high-quality products while maintaining safety and quality standards. Work flexibly within a team environment to meet business needs. Ensure excellent housekeeping and compliance with safety guidelines. Please see the full job description here: Fabricator Welder Job Description Qualifications Fabricator Welder Requirements: Ability to read and work from technical drawings. Skilled in welding, polishing, and working with fine tolerances. Experience with Oxy-Acetylene heating equipment and digital bevel gauges. Strong commitment to a right first time (RFT) ethos and continuous improvement. Additional Information If you have previous experience working as a Fabricator Welder or Welder in a similar role and are looking for a new opportunity in Andover, click the "Apply Now" button or contact us for further information. Benefits Include: Competitive Salary, paid on a monthly basis Profit Share Bonus Scheme - a proportion of Company earnings shared equally between all employees and paid out at regular intervals 25 days holiday, plus bank holidays, with the option to purchase an additional 5 days Pension Scheme, matched contribution/salary sacrifice SimplyHealth Cash Plan which allows you to claim towards health costs such as dental and optical as well as physiotherapy, chiropody and flu vaccinations Life Assurance Scheme Long Service award scheme, with additional holiday benefit Company Benefits Discount and Rewards Scheme which includes shop discounts, hotel discounts, days out and more Employee Assistance Programme Company Sick Pay Enhanced maternity and paternity provision Free onsite parking Stannah Group is an equal opportunities employer. We welcome and encourage applications from candidates of all backgrounds, identities, and abilities. We are a Disability Confident Committed Employer. We treat all our job applicants fairly and with respect. Our employees are the heart of our business. We take great care to create a working environment where everyone feels valued. Join our team and be a part of our diverse and inclusive community! We reserve the right to close this vacancy early if we receive high numbers of applications for the role. Appropriate right to work must be held by applicants. Sponsorship is not available. PandoLogic.
Apr 26, 2026
Full time
Job Description Fabricator Welder Jobs in Andover at Stannah - Join Our Team! We have an exciting opportunity for a Fabricator Welder to join Stannah based at Andover. This is a permanent, full time position working Monday to Thursday 07:00 to 16:45. As a Fabricator Welder, you will be responsible for joining metal using a MAG welding technique to create the finished product. Your duties will include cutting and welding materials according to technical drawings created by our Rail Design Team. This is a great opportunity for a skilled Fabricator Welder looking to work in a dynamic environment. You will play a key role in ensuring our products meet the highest quality standards before reaching the next stage of production. To be successful as a Fabricator Welder, it is essential that you have previous experience in welding. Experience in reading technical drawings would be desirable. Fabricator Welder Responsibilities: Read and interpret product drawings to complete jobs within specifications. Deliver high-quality products while maintaining safety and quality standards. Work flexibly within a team environment to meet business needs. Ensure excellent housekeeping and compliance with safety guidelines. Please see the full job description here: Fabricator Welder Job Description Qualifications Fabricator Welder Requirements: Ability to read and work from technical drawings. Skilled in welding, polishing, and working with fine tolerances. Experience with Oxy-Acetylene heating equipment and digital bevel gauges. Strong commitment to a right first time (RFT) ethos and continuous improvement. Additional Information If you have previous experience working as a Fabricator Welder or Welder in a similar role and are looking for a new opportunity in Andover, click the "Apply Now" button or contact us for further information. Benefits Include: Competitive Salary, paid on a monthly basis Profit Share Bonus Scheme - a proportion of Company earnings shared equally between all employees and paid out at regular intervals 25 days holiday, plus bank holidays, with the option to purchase an additional 5 days Pension Scheme, matched contribution/salary sacrifice SimplyHealth Cash Plan which allows you to claim towards health costs such as dental and optical as well as physiotherapy, chiropody and flu vaccinations Life Assurance Scheme Long Service award scheme, with additional holiday benefit Company Benefits Discount and Rewards Scheme which includes shop discounts, hotel discounts, days out and more Employee Assistance Programme Company Sick Pay Enhanced maternity and paternity provision Free onsite parking Stannah Group is an equal opportunities employer. We welcome and encourage applications from candidates of all backgrounds, identities, and abilities. We are a Disability Confident Committed Employer. We treat all our job applicants fairly and with respect. Our employees are the heart of our business. We take great care to create a working environment where everyone feels valued. Join our team and be a part of our diverse and inclusive community! We reserve the right to close this vacancy early if we receive high numbers of applications for the role. Appropriate right to work must be held by applicants. Sponsorship is not available. PandoLogic.
We are seeking a skilled and experienced Welder to support refinery operations. This is an excellent opportunity to work with a leading company and be part of a new dynamic workshop team. Key Responsibilities Weld ferrous and non-ferrous pipework in support of pipe fabrication activities worked from isometric drawings. Produce butt welds and fillet welds using TIG and MMA welding processes, also able to use MIG for supports / steelwork. Carry out welding in accordance with approved site Welding Procedure Specifications (WPS) and site standards. Maintain a safe, clean, and organised work area in compliance with UK health and safety regulations. Requirements Proven experience welding Ferrous and Non Ferrous pipework within the oil & gas or heavy industrial sectors e.g. refining, petrochemical, nuclear, shipbuilding. Ability to read and interpret isometric drawings, WPS, and welding documentation Qualified to ISO 9606 standards, including but not limited to Butt weld -6G position (TIG / MMA) in carbon steel and (TIG) in stainless steel. Valid welder coding to ISO 9606-1 for relevant processes (TIG and / or MMA), with supporting procedure qualifications (ISO 15614). Strong commitment to safety, quality, and teamwork. This role is inside IR35. Rates advertised are PAYE. The site location is SO45 1TX. Candidates must have a driving license to enable independent commuting to work and travel on site.
Apr 26, 2026
Contractor
We are seeking a skilled and experienced Welder to support refinery operations. This is an excellent opportunity to work with a leading company and be part of a new dynamic workshop team. Key Responsibilities Weld ferrous and non-ferrous pipework in support of pipe fabrication activities worked from isometric drawings. Produce butt welds and fillet welds using TIG and MMA welding processes, also able to use MIG for supports / steelwork. Carry out welding in accordance with approved site Welding Procedure Specifications (WPS) and site standards. Maintain a safe, clean, and organised work area in compliance with UK health and safety regulations. Requirements Proven experience welding Ferrous and Non Ferrous pipework within the oil & gas or heavy industrial sectors e.g. refining, petrochemical, nuclear, shipbuilding. Ability to read and interpret isometric drawings, WPS, and welding documentation Qualified to ISO 9606 standards, including but not limited to Butt weld -6G position (TIG / MMA) in carbon steel and (TIG) in stainless steel. Valid welder coding to ISO 9606-1 for relevant processes (TIG and / or MMA), with supporting procedure qualifications (ISO 15614). Strong commitment to safety, quality, and teamwork. This role is inside IR35. Rates advertised are PAYE. The site location is SO45 1TX. Candidates must have a driving license to enable independent commuting to work and travel on site.
Pay: £13.00-£14.00 per hour Job Description: We are seeking a skilled MIG Welder to join our manufacturing team. The successful candidate will be responsible for fabricating and welding metal components with precision and efficiency, ensuring high-quality standards are maintained. This role offers an excellent opportunity for individuals with a strong background in welding and fabrication to contribu click apply for full job details
Apr 26, 2026
Full time
Pay: £13.00-£14.00 per hour Job Description: We are seeking a skilled MIG Welder to join our manufacturing team. The successful candidate will be responsible for fabricating and welding metal components with precision and efficiency, ensuring high-quality standards are maintained. This role offers an excellent opportunity for individuals with a strong background in welding and fabrication to contribu click apply for full job details
MIG/TIG & Welder Fabricator Full-Time Monday - Friday 8:00am - 4:30pm (40 hours per week) We are currently recruiting for an experienced MIG/TIG & Welder Fabricato r to join a well-established business. This is a hands-on role working on both batch production and bespoke fabrication projects. Key Responsibilities Carry out MIG and TIG welding to a high standard Fabricate bespoke items from technical drawings Produce batch work products as required Work independently to fabricate items without the use of jigs Ensure all work meets quality and safety standards Support the development of apprentices , sharing knowledge and skills Requirements Proven experience in MIG and TIG welding and fabrication Ideally up to 10 years' experience in a similar role Ability to read and work from technical drawings Confidence working independently on projects Experience mentoring or training apprentices is desirable Apply now! Adecco is a disability-confident employer. It is important to us that we run an inclusive and accessible recruitment process to support candidates of all backgrounds and all abilities to apply. Adecco is committed to building a supportive environment for you to explore the next steps in your career. If you require reasonable adjustments at any stage, please let us know and we will be happy to support you. Adecco acts as an employment agency for permanent recruitment and an employment business for the supply of temporary workers. The Adecco Group UK & Ireland is an Equal Opportunities Employer. By applying for this role your details will be submitted to Adecco. Our Candidate Privacy Information Statement explaining how we will use your information is available on our website.
Apr 25, 2026
Full time
MIG/TIG & Welder Fabricator Full-Time Monday - Friday 8:00am - 4:30pm (40 hours per week) We are currently recruiting for an experienced MIG/TIG & Welder Fabricato r to join a well-established business. This is a hands-on role working on both batch production and bespoke fabrication projects. Key Responsibilities Carry out MIG and TIG welding to a high standard Fabricate bespoke items from technical drawings Produce batch work products as required Work independently to fabricate items without the use of jigs Ensure all work meets quality and safety standards Support the development of apprentices , sharing knowledge and skills Requirements Proven experience in MIG and TIG welding and fabrication Ideally up to 10 years' experience in a similar role Ability to read and work from technical drawings Confidence working independently on projects Experience mentoring or training apprentices is desirable Apply now! Adecco is a disability-confident employer. It is important to us that we run an inclusive and accessible recruitment process to support candidates of all backgrounds and all abilities to apply. Adecco is committed to building a supportive environment for you to explore the next steps in your career. If you require reasonable adjustments at any stage, please let us know and we will be happy to support you. Adecco acts as an employment agency for permanent recruitment and an employment business for the supply of temporary workers. The Adecco Group UK & Ireland is an Equal Opportunities Employer. By applying for this role your details will be submitted to Adecco. Our Candidate Privacy Information Statement explaining how we will use your information is available on our website.
