8 jobs found

Our client is a successful and well-established manufacturer. They are looking for a Multiskilled Maintenance Engineer (Mechanical & Electrical Maintenance Engineer) to join their team. Competitive salary + Shift allowance (to be discussed on application) Shift pattern: 3 on 3 off, alternating days and nights, 6:30-18:30, 18:30-6:30, average 42 hours week. Responsibilities: Carry out reactive maintenance and PPM activities in line with any legal compliance. Support days engineering team with PPM s and planned repairs across the factory when volume of breakdown work allows. Identify and implement proactive improvement opportunities, inclusive of JDI (Just Do It) activities and PPM. Drive continuous improvement across site. To operate in line with all company H&S Standards. Implementation and adherence to safe working practices in accordance with legislation. Complete all administrative tasks on Agility (CMMS) to ensure all activities are captured. Develop new activities where and when required to do so. Have an active involvement with site project work where applicable. PLEASE ONLY APPLY IF YOU MEET THE MAJORITY OF THE BELOW REQUIREMENTS: NVQ Level 3 / Apprentice trained in Engineering Previous experience as a Maintenance Engineer in a manufacturing / production environment Able to read mechanical, electrical and other drawings associated with complexing manufacturing machinery Knowledge of hydraulics, pneumatics Knowledge of PLC s and automated systems Knowledge of electrical systems Knowledge of Health and Safety regulations Knowledge of using cranes Working with Injection Moulders and Extrusion equipment (desirable, not essential) Experience of PPM execution on complex manufacturing equipment Experience of working under pressure to resolve complex breakdowns Similar job titles include: Electrical Engineer / Maintenance Engineer / Maintenance Electrician / Mechanical Fitter / M&E Maintenance Engineer / Shift Engineer / Dual Skilled Maintenance Engineer / Engineering Technician / Electrical Engineer / Multi Skilled Maintenance Engineer / Multi Skilled Maintenance Technician / Maintenance Electrician / Electrical Technician / Shift Engineer / M&E Maintenance Engineering roles / etc.

Maintenance Technician 23.00 - 25.00 - PAYE Blackburn Continental Days & Nights (2Days/2nights/4off) gap technical are proud to be representing this global manufacturing business in their search for an Operator Maintainer (Extrusion) to work at their facility based near Blackburn Performance Objectives To work individually and within a team to operate & maintain all Extrusion equipment, working pro-actively to raise standards in the department. To ensure product quality standards and maximum output are achieved, while supporting the policies, goals, and objectives of the business. Key responsibilities: Work in a safe, timely and cost-effective manner whilst operating & maintaining relevant equipment and processes. Responsibility for the maintenance and performance of all extrusion process equipment, within scope of role. Work in a team to carry out risk assessments and or be involved in projects involving changes to process equipment or procedures. Problem solving process/production problems, showcasing, and generating knowledge and skills in the area of process improvement, contributing to overall team performance. Supporting engineering on scheduled maintenance and assisting in breakdowns on plant equipment. Person Specification Full engineering apprenticeship in mechanical or plant engineering or equivalent. Good all round engineering background including knowledge and skill in mechanical maintenance, mechanical fitting, pipefitting, welding oxy-acetylene, cutting, pneumatics, hydraulics, centre lathe, steam control / regulation. Understanding of Extrusion machinery and the skills and ability to pass this knowledge on to Extrusion operators / Technicians / Fitter Operators. Knowledge of the relevant health and safety and accident and incident procedures to ensure safe running of plant and machinery. Apply Please send your CV via the Apply now option on the website If you have any questions or are interested in any other opportunities we may have, please do not hesitate to get in touch This vacancy is being advertised on behalf of gap technical who are operating as an employment agency. gap technical are committed to the selection, recruitment and development of the best people, basing judgements solely on suitability for the job. Closing Date: 29/05/2026 "By applying for the above position and providing your personal data to us you understand that your data will be processed in line with our Privacy Policy."

Mechanical Maintenance Engineer Dalbeattie 44,000 - 46,000 Basic + 4 on 4 off days and nights + Unrivalled Job Stability + Training + Pension + Benefits Package Work as a mechanical maintenance engineer for a UK leading industrial manufacturing company who can offer unrivalled long term job stability. Work in a highly skilled technical team for a growing company where you will be treated as more than just another number. This industrial manufacturing company supplies to a range of large, well-known businesses UK wide and continues to grow! They require an additional mechanical maintenance engineer to join their experienced team. Work a role where you will feel appreciated in a good environment for a business that recognises your importance. Your Role As A Mechanical Maintenance Engineer: Mechanical Maintenance role - 4 on 4 off days and nights Carry out planned / reactive maintenance and breakdowns Conduct mechanical fault finding and repairs (Hydraulics, Pneumatics, Conveyors etc) As A Mechanical Maintenance Engineer You Will Have: A background as a mechanical fitter / maintenance engineer or similar (manufacturing / industrial / ex forces welcome) Strong mechanical engineering skills - Industrial / Manufacturing / Production experience You must be commutable to Dalbeattie Please apply or contact Georgia Daly for immediate consideration This vacancy is being advertised by Future Engineering Recruitment Ltd. The services of Future Engineering Recruitment Ltd are that of an Employment Agency. Future Engineering Recruitment Ltd can only accept applications from candidates who have a valid legal permit or right to work in the United Kingdom. Potential candidates who do not have this right or permit, or are pending an application to obtain this right or permit should not apply as your details will not be processed. We will endeavour to respond to all applicants however due to the sheer volume of response, we can only guarantee that candidates who have been shortlisted will be contacted.

Role: Mechanical Maintenance Engineer / Mechanical Fitter Hours: 7:00pm till 3:30am / 3pm till 12:00am, Mon to Fri - Permanent nights - some flex on start/finish times and working days (can do Sunday to Thursday etc) Salary: 43,000- 45,000, plus Benefits and Career opportunities Location: Commutable from Spalding, Grantham, Peterborough, Bourne, Sleaford, and surrounding areas Company We are currently recruiting a Mechanical Maintenance Engineer / Mechanical Fitter to work within a small maintenance team for a Food manufacturing company. You will benefit from joining this very friendly and family feel environment, backed by a supported company who are their to ensure you get the best out from them and are given all what you need to be successful. The role is working permanent nights with some flexibility around start/finish times and the working days. If you have a background in Mechanical Maintenance and/or Service in any environment, such as industrial, manufacturing, production FMCG or similiar, we want to hear from you! Don't delay and apply now to be considered for this exciting opportunity with a successful company that continues to grow. Responsibilities This roles primary focus is proactive maintenance, working through planned preventative maintenance of the machinery and equipment throughout the site. With it being a very small small team, the role is extremely varied, rather autonomous and will give you the opportunity to make it your own. Machinery mainly consists of conveyors and packaging machinery. In and around the above, you will also assist with any reactive work, attending to and resolving breakdowns urgently, general project work, machinery upgrades, installation, ad-hoc facilities, coordinating any specialist contractors when on-site and help support continuous improvements. Requirements Mechanical Maintenance Engineer / Mechanical Fitter Holding qualifications or equivalent experience in mechanical or similar Maintenance or Service Engineer background in any environment, ideally industrial, manufacturing, production or automated etc. Have maintenance and troubleshooting skills across SOME of the following; motors, belts, bearings, chains, gears, pumps, pneumatics, hydraulics etc. Planned preventative maintenance experience Good troubleshooting & fault-finding skills. Friendly and adaptable with the ability to work well as part of a close-knit team Proactive, self-starter work attitude and can be flexible and able to give & take on start & finish times when necessary. Ensure all activities are carried out in accordance with the Site Health and Safety instructions. If this role sounds of interest, please apply now and send your most up to date CV to Wesley at TechNichols Resourcing to be considered. Or call TechNichols Resourcing and speak with Wesley for further information. We will endeavour to get back to all applicants but if you have not heard back within 5 working days unfortunately your application has been unsuccessful.

Role: Mechanical Maintenance Engineer - Nights Salary : £47,000 to £49,000 per annum + overtime paid at x1.5 & x2.0 AND benefits Hours: Monday to Thursday, 9.00pm to 7.30am (permanent nights) Location : Commutable from Howden, Hull, Selby, Goole, Doncaster, Brough, York, Market Weighton and surrounding areas Only 4 shifts per week - Monday to Thursday 9pm to 7.30am This global heavy plant manufacturing company offer challenging and rewarding careers to their Maintenance Fitters & Engineers, with scope for further training and qualifications, together with development of skills and future progression. With a sizeable team of over 30 Engineers, the company try to keep all engineering works inhouse, minimising the need and use of external contractors, so you really do get involved across the full range of reactive, proactive and project work.If you're after a role where you can get your hands dirty, be challenged as well as supported, with opportunities to grow and progress, this job is for you.It would suit a Mechanical Fitter or Mechanical Maintenance Engineer with a background in an industrial or manufacturing environment with ANY/SOME mechanical experience of bearings, shafts, belts, chains, motors, gears, pumps, hydraulics, pneumatics, welding (MIG) - please apply. Responsibilities Your role will be to focus on Mechanical Maintenance in the factory, including: Maintenance of various equipment and machinery across their factory, dealing with and overcoming problems in a fast paced environment. Working through a planned preventative maintenance program as well as project and continuous improvement work. There is a lot of future planned projects involving upgrades and refurbs that all Engineers get a hand in doing. Reactive maintenance, working at pace attending to and resolving breakdowns swiftly and getting production lines back up and running again. Dealing with conveyors, belts, bearings, motors, gears, pumps, chains, hydraulics, pneumatics etc. Requirements Time served apprentice or mechanical engineering qualification Experience with mechanical maintenance or mechanical fitting work, within an industrial and/or manufacturing environment Machinery maintenance experience Any experience of belts, chains, bearings, pumps, motors, gears, hydraulics, pneumatics would be desirable Any MIG welding experience would be desirable Heavy plant/machinery experience would be great but not essential Proactive work attitude and keen to get stuck in Friendly and adaptable working attitude If this role sounds of interest, please apply now and send your most up to date CV to Jane at TechNichols Resourcing to be considered. Or call TechNichols Resourcing and speak with Jane for further information.We will endeavour to get back to all applicants but if you have not heard back within 5 working days unfortunately your application has been unsuccessful.

Role : Mechanical Maintenance Engineer / Mechanical Fitter Salary : £45,000 - £48,000 per annum overtime paid at x 1.5 & x 2.0 benefits and opportunities to progress up through their salary grades and receive enhancement Hours: 4 on 4 off, 6am to 6pm (shift 1 and 2) / 7am to 7pm (shift 3) / 6pm to 6am (shift 4) Location: Commutable from Worcester, Bridgnorth, Kidderminster, Ludlow, Redditch and surrounding areas Company: We are currently recruiting for a Mechanical Maintenance Engineer/Fitter to work within a manufacturing company at one of their leading automated factories. You will benefit from a friendly and loyal team of Engineers working in this fast faced environment. The role is varied and enjoyable where you can expect to be challenged, be supported and help continuously improve machinery. You will also benefit from having opportunities to learn new skills, receive further training and develop your career in this factory and company. Progress up through their grades that offers salary enhancements and more responsibilities! If you're a mechanical fitter, qualified through an apprenticeship or similar, keen to secure yourself an exciting career opportunity, don't delay and apply now! Responsibilities for the Mechanical Maintenance Engineer/Fitter: Mechanical Maintenance Fitter, working a continental shift pattern of 4 days 6am till 6pm then 4 off, followed by 4 days 6am till 6pm then 4 off, followed by 4 days 7am to 7pm then 4 off, followed by 4 nights 6pm to 6am followed by 4 off. Therefore only working 4 nights in 1 month. Your role will include, although not limited to: Planned Preventative Maintenance across a range of equipment and machinery Dealing with machinery breakdowns and problems, fault finding, diagnostics and repairs. Assisting with planned shut-downs and project work, refurbishing machines and replacing worn parts. Requirements for the Mechanical Maintenance Engineer/Fitter: Completed a recognised Mechanical Engineering Apprenticeship or hold Mechanical Engineering qualification Experience in a similar environment; Industrial, Production or Manufacturing environments - most considered Maintenance experience; dealing with machinery and equipment problems and breakdowns and/or completing preventative maintenance of plant/industrial machinery Any experience of SOME of the following; Belts, Chains, Gear Boxes, Pumps, Bearings, Hydraulics, Pneumatics, Welding and Fabricating etc Motivated and driven to succeed Willing to take on and complete further training as part of your growth and development in the factory and company If this role sounds of interest, please apply now and send your most up to date CV to Vicky at TechNichols Resourcing to be considered. Or call TechNichols Resourcing and speak with Vicky for further information. We will endeavour to get back to all applicants but if you have not heard back within 5 working days unfortunately your application has been unsuccessful.

Maintenance Technician (Nights) - Waste and Recycling West Yorkshire £35,000-£45,000 Nights We're seeking a hands-on and enthusiastic Maintenance Fitter to support the smooth operation of our UK-based waste management facility. Responsibilities In this role, you ll maintain and repair essential machinery such as conveyors and excavators, ensuring everything runs safely and efficiently. Carry out scheduled and unscheduled maintenance on a range of plant machinery, including conveyor systems, shredders, excavators, and more. Diagnosis and Repair: Troubleshoot machinery issues, diagnose faults, and perform necessary repairs, replacements, or adjustments to ensure optimal performance. Preventative Maintenance: Implement preventative maintenance programs to minimize equipment breakdowns and downtime. Safety and Compliance: Ensure all maintenance activities comply with safety regulations and environmental standards, including proper waste handling. Documentation: Maintain comprehensive records of maintenance activities, including logs of inspections, repairs, and spare parts inventory. Team Collaboration: Collaborate with other maintenance staff and engineering teams to address complex issues and improve overall plant operations. Requirements Just a strong work ethic, a willingness to learn, and a passion for making a difference. Qualifications in plant maintenance, mechanical engineering, or a related field. Proven experience in plant maintenance, preferably in a waste management or industrial setting. Strong diagnostic and problem-solving skills. Knowledge of heavy plant machinery and associated equipment. Good communication and interpersonal abilities. Commitment to safety and environmental responsibility