15 jobs found

We are seeking a skilled and experienced Welder to support refinery operations. This is an excellent opportunity to work with a leading company and be part of a new dynamic workshop team. Key Responsibilities Weld ferrous and non-ferrous pipework in support of pipe fabrication activities worked from isometric drawings. Produce butt welds and fillet welds using TIG and MMA welding processes, also able to use MIG for supports / steelwork. Carry out welding in accordance with approved site Welding Procedure Specifications (WPS) and site standards. Maintain a safe, clean, and organised work area in compliance with UK health and safety regulations. Requirements Proven experience welding Ferrous and Non Ferrous pipework within the oil & gas or heavy industrial sectors e.g. refining, petrochemical, nuclear, shipbuilding. Ability to read and interpret isometric drawings, WPS, and welding documentation Qualified to ISO 9606 standards, including but not limited to Butt weld -6G position (TIG / MMA) in carbon steel and (TIG) in stainless steel. Valid welder coding to ISO 9606-1 for relevant processes (TIG and / or MMA), with supporting procedure qualifications (ISO 15614). Strong commitment to safety, quality, and teamwork. This role is inside IR35. Rates advertised are PAYE. The site location is SO45 1TX. Candidates must have a driving license to enable independent commuting to work and travel on site.

As a Pipe Fitter Welder you will be required to work on FMCG project located in the Bradford, Yorkshire area. Applicants must be competent with fitting and welding thin wall stainless steel, 1 - 2 inch in diameter pipework. Desired applicants will be fully competent with reading from engineering drawing and being able to weld thin wall stainless in a TIG process, to a coded standard. As a Pipe Fitter Welder you will be required to work on FMCG project located in the Bradford, Yorkshire area. Applicants must be competent with fitting and welding thin wall stainless steel, 1 - 2 inch in diameter pipework. Desired applicants will be fully competent with reading from engineering drawing and being able to weld thin wall stainless in a TIG process, to a coded standard. Lodge allowance available if further than 40 miles from site. Working Hours: 07:30am - 17:30pm (10 hours paid)

Mike Collins Recruitment are recruiting a skilled TIG Welder/Fabricator to join our busy client based in Brierley Hill. Duties: TIG welding and fabrication of industrial pipework, working from engineering drawings, Set up and operate welding equipment, including power tools and hand tools, Clean and prepare surfaces for welding by removing rust, dirt, and debris, Assemble fabricated metal parts using various techniques such as bolting, riveting, or welding, Inspect welded joints for quality and accuracy, Will be required to MIG Weld as and when needed so must have previous MIG experience, Perform basic math calculations to measure and cut materials accurately, Follow safety protocols and maintain a clean work area. Skills: Previous TIG welding and fabrication experience, Strong mechanical knowledge and understanding of metal fabrication principles, Ability to read engineering drawings, and welding symbols, Use of power tools and hand tools used in metal fabrication, Knowledge of pipe fabrication is preferred, Basic math skills for measurements and calculations. Hours of work: Monday to Thursday 7.30am - 4.30pm, Friday 7.30am - 1.30pm Rate of pay: 15ph while on 12 week temp to perm, will increase once taken on permanent. We DO NOT offer sponsorships so please only apply if you are a UK resident and have the correct Right to Work documentation.

Metal-core arc welders wanted! (MCAW process) 10-Month Contract 4-Day Week Great Rates 26 Days PAYE 31 Nights PAYE Premium rate overtime available Digs allowance (if commuting over 50 miles) Working hours : DAYS Monday-Thursday: 06:30-18:00 NIGHTS Monday-Thursday: 19:10-06:40 Ready to get stuck into a well-paid contract without giving up your weekends? We've got an exciting opportunity for experienced Pipe Welders to join a dynamic project based in Thirsk- with excellent day and night rates, a 4-day working week, and digs support for those travelling in. What's on Offer: 10-month contract - steady work through the year 4-day week - Monday to Thursday only Great rates : 26.00 per hour Days (PAYE) 31.00 per hour Nights (PAYE) Overtime available digs allowance if you live over 50 miles away from site Shifts Available: Day Shift : 06:30 - 18:00 (Monday to Thursday) Night Shift : 19:10 - 06:40 (Monday to Thursday) (30 mins paid + 30 mins unpaid break) The Role: We're looking for highly skilled Pipe Welders with strong offshore or heavy industrial experience. You'll be performing high-precision welding in multiple positions on carbon and alloy steels, working to tight specs and delivering top-tier results every time. Duties include: Welding using MCAW - Metal core arc welding process Reading and working from WPS and engineering drawings Performing structural and pressure welds with confidence Completing fillet and full-pen butt welds to spec Maintaining full compliance with quality and traceability standards Using grinders, gougers, and other tools for a high-quality finish What You'll Need: Proven experience in offshore, oil & gas, or marine welding Current or past weld certification in metal - core arc welding (MCAW) Able to interpret fabrication drawings and isometrics Strong QA/QC focus and able to pass trade tests Bonus if you have: Background in large-scale offshore or heavy fabrication projects Experience with self-checking and weld inspections Weld Tests & Interviews: Taking place from week commencing 13th October 2025. The weld test will consists of a Pipe-to-plate fillet and an inline butt weld. Interested and ready to get started? Click apply now or contact Dean Carthy at Employment Solutions for full details.

We're looking to hire a M&E Recruitment resourcer who gets genuinely excited about technology and the possibilities of automation. In this role, you'll work closely with our most experienced and highest billers, and it's perfect for an ambitious, people focused individual who thrives in a fast paced environment. You'll enjoy problem solving, building strong relationships, and working towards clear goals. To shine in this role, you'll need resilience, adaptability, excellent communication skills, a keen eye for detail, and a strong drive to get results. You will be reaching out and engaging with blue collar Mechanical and Electrical trades who predominantly work in the contractor market. Every day you'll be speaking to an array candidates from all over the UK working within the M&E market including: Pipefitters Pipe welders Site Welders (MMA / FCAW / TIG) Installation / Approved Electricians Electrical improvers Mechanical fitters Electrical / Mechanical mates We've invested in a fantastic tech stack to make your job easier and more effective including Bullhorn CRM, automated data tools, AI support, Sourcebreaker, LinkedIn Recruiter, multiple job boards, and marketing systems that help us stand out in the market. We're also proud to say we're ranked in the UK for engineering and manufacturing recruitment on Trustpilot with a 5 star rating across 400 glowing reviews from happy clients and candidates. Key Responsibilities Source and select candidates using job boards, databases, LinkedIn, and adverts. Conduct interviews and match candidates to the right roles. Write engaging job adverts to attract top talent. Build and maintain strong candidate relationships, offering ongoing support. Gather market intelligence to help with lead generation and spotting trends. What you'll get in return: Salary - 27- 30k + competitive commission scheme 25 days holiday + 3 days off for Christmas + your birthday off Plenty of extra perks including past prizes like trips to New York, Las Vegas, and our most recent was VIP tickets to see Oasis! If you're ready for a recruitment role where you'll have the opportunity to learn from some of the best contract recruiters around and have fun along the way, email Dean Carthy at (url removed)

TIG Welder / Fitter Didcot £17.00 per hour Our well-established client is currently looking to hire a skilled Welder/Fitter on a permanent basis. This is a fantastic opportunity to join a respected company that offers a stable work environment, competitive benefits, and opportunities for long-term development. TIG Welder Fitter Roles and Responsibilities: Perform TIG welding on pipework, primarily using stainless steel Collaborate effectively with a team of experienced welder fitters Manufacture vacuum-insulated pipework to precise specifications Carry out installation work as required, both on-site and off-site Work with a variety of metals, particularly stainless steel Accurately read and interpret engineering drawings and technical schematics TIG Welder / Fitter Ideal Candidate: Proven TIG welding experience, specifically on pipework Confident in reading and interpreting detailed engineering drawings Be a coded welder - beneficial Strong attention to detail and a commitment to high-quality workmanship Previous experience with stainless steel and other industrial metals Hold a CSCS card - ideal Full UK driving licence is essential Welder / Fitter Benefits: Monday Thursday, 07 30 Friday, 07 30 Pay structure including a 10% premium for onsite working All overtime outside the base 39 hours is paid at time + half Permanent position 20 days holiday, rising to 25 days after 5 years of service + statutory days Jackie Kerr Recruitment is an independent agency that has been established for 28 years. We strive to provide the ultimate consultancy service to all our candidates. Whether you are looking for permanent or temporary work we pride ourselves in understanding our candidates' requirements to ensure that we place you in your ideal role. We have recently heavily invested in new Recruitment Software that provides an online portal. Simply visit jackiekerrrecruitment. com to enter your details and you will receive job alerts, hot off the press. The portal enables you to update your information and CV at any time, so we always have your latest employment details on record. So please visit our website and let us help you to find your dream job! Please note: At Jackie Kerr Recruitment we receive a huge number of applications for each job that is posted. If you do not hear from us within 2 weeks of your original application, please go to our website jackiekerrrecruitment. com to apply for other jobs that may be suitable to you.

Interaction Engineering Job Title: MIG & TIG Welder Fabricator Huntingdon About the Company: Our client is a well-established and respected engineering and fabrication company known for delivering high-quality, bespoke metalwork solutions across a variety of sectors. Due to continued growth and increased project demand, they are now looking to recruit an experienced MIG & TIG Welder Fabricator to join their skilled team. Key Responsibilities: Carry out MIG and TIG welding on a variety of materials, including mild steel, stainless steel, and aluminium Interpret and work from technical drawings and fabrication plans Fabricate components with a high level of accuracy and attention to detail Use workshop machinery and tools safely and effectively Ensure all work meets quality standards and project deadlines Assist with general workshop duties as required Requirements: Proven experience in both MIG and TIG welding Strong fabrication skills and experience working from technical drawings Competent with a range of materials and thicknesses Ability to work independently and as part of a team Excellent attention to detail and commitment to high standards Relevant welding certifications (desirable but not essential) What s on Offer: Competitive salary based on experience Opportunities for overtime and progression Supportive team environment Stable and growing company with a strong pipeline of work

Job Role: Pipe Fitter/ Welder Area: Kent, London & Surrey Salary: £55k - £60k My client is looking for a Pipe Fitter/ Welder to join their team covering various site in Kent, London & Surry. This will be covering Commercial, Healthcare, Education & MOD installations and maintenance. Responsibilities: Installation of carbon steel, stainless steel, and copper pipework (crimped, screwed, welded, and soldered). Carrying out TIG/MMA welding to high standards. Interpreting technical drawings and schematics. Working independently and as part of a team to meet project deadlines. Ensuring work complies with all safety and quality standards. The ideal candidate will be: Proven experience in commercial pipe fitting and welding Proficient in TIG and MIG welding Strong understanding of health & safety procedures on construction sites Full driving licence This role is being handled by Chloe, PW Construction Recruitment. Please apply with your CV or alternatively call (phone number removed) or email (url removed) for more information. Not quite the right role but still looking? Whether you are entry or Executive level, our team of experienced Recruitment specialists can help you with your career. We are Kent s leading independent consultancy and pride ourselves on delivering an exceptional service to both candidates and clients. Find us on and

Shorterm Group are looking for Pipefitter/Welders in Slough Location: Slough Start Date: ASAP Shift: Monday - Friday, 7am - 6pm (10 hours paid) possible weekend work Rate: 26 per hour CIS Ticket: Must have CSCS card, IPAF beneficial Duties: Working on food equipment, stainless steel and dairy pipework Experience: Must have stainless steel experience and TIG welding. Length: 4 months work If you are interested, please call Natalie on (phone number removed)

Job Title: Welder (TIG / Gas Process) Location: Gainsborough Salary: 14.01 - 16.61 per hour depending on experience Job Type: Full-Time - Temporary to Permanent Start Date: Immediate starts available Key Responsibilities: Perform TIG welding on automotive exhaust components, including pipes, mufflers, and flanges. Work with thin-gauge stainless steel and mild steel , ensuring clean, accurate welds with minimal distortion. Interpret technical drawings and fabrication specs related to exhaust systems. Fit, assemble, and weld parts to meet OEM or aftermarket specifications . Inspect completed welds for strength, accuracy, and appearance in line with industry and safety standards. Maintain welding equipment and ensure a clean, organised work environment. Requirements: Proven experience in TIG welding , particularly in the automotive or metal fabrication industry . Strong ability to weld thin materials without burn-through or distortion. Ability to read and interpret engineering drawings and welding symbols . PERKS Paid weekly Holidays between 24 and 29 days depending on length of service Annual profit share scheme Free parking Life insurance Annual pay increase Welding School on site to increase skills Search is an equal opportunities recruiter and we welcome applications from all suitably skilled or qualified applicants, regardless of their race, sex, disability, religion/beliefs, sexual orientation or age

Workshop Tig Welder (Also recruiting semi skilled welders) Aermech Ltd is a fabricator, supplier and site installer of Water Treatment pipework and equipment throughout the UK and Ireland. Due to continued growth, we are now recruiting experienced Welders to join the team at our workshop based in Pembroke, South Wales. The successful candidates will be working alongside other welders and fabricators in our modern workshop, training will be provided to carry out the role successfully. Job Type: Full-time Permanent for the right candidate. Competitive pay rates negotiated depending on experience. Working Hours: (Workshop-based) Monday to Thursday 8.00am - 4.30pm. Friday 8.00am - 2.30pm. Occasional overtime opportunities. 25 Days Holiday, plus Bank Holidays. Job Role & Responsibilities: (Preferred, but not essential) Experience in Stainless Steel Tig Welding on various pipe diameters and wall thicknesses. (Generally 2mm-6mm thick.) Experience in Stainless Steel and mild steel Mig Welding. Able to complete fabrication tasks. Able to complete welds to a high quality, in accordance with project/company requirements. Experience working with Engineering drawings. Knowledge and experience of Health and Safety policies and procedures at work. Must be able to work well in a team and have the right attitude. Occasional site work and site welding if required. Company Benefits: Cycle to work scheme. Company Pension scheme. Company transport provided when traveling to sites. Overnight lodge allowance. Successful candidates would have the option for training progression. Competitive salaries depending on experience. References: Two work-related references are ideal. 3-month probationary period will apply to all positions. To be considered for this role, please apply today by sending your CV or covering letter.

The Opportunity Wolviston Management Services are proud to be supporting long-standing clients within Teesside's thriving engineering and fabrication sectors. As demand continues to rise across prestigious infrastructure, energy and industrial projects, we're seeking time-served TIG Welders with proven experience delivering high-quality work to specification. This is an excellent opportunity to join a respected, safety-conscious team on secure, long-term works - contributing to high-profile builds and maintaining the region's reputation for engineering excellence. Key Responsibilities Carry out TIG welding on a variety of materials, including stainless steel and/or exotic alloys depending on project requirements Interpret and work from technical drawings, weld procedures and fabrication specs Ensure weld quality and dimensional accuracy , working to tight tolerances Clean and prepare weld areas to specification; post-weld dressing where required Adhere to all site safety procedures , including correct use of PPE and permits Support broader fabrication activities as part of a wider team when required Maintain clean working areas, following all QA/QC, HSE and environmental standards What We're Looking For Time-served Welder/Fabricator with demonstrable TIG experience Strong understanding of welding symbols, fabrication drawings and QA requirements Coded TIG Welders highly desirable - or willingness to test onsite Experience in pipework, pressure vessels, thin-wall or structural fabrications is advantageous CSCS / CCNSG Safety Passport preferred Ability to work under pressure to meet tight deadlines without compromising quality A positive, professional and safety-first attitude What You'll Get Long-term contract with regular hours Overtime available depending on site/project Supportive, well-established teams across Teesside Opportunity to work on major industrial and infrastructure projects Weekly pay

Welder MIG - Stainless Steel The COMPANY Our client is an independent company who have carved themselves a niche supplying/designing powertrain components (exhausts, and other specialist Automotive components) to OE Automotive customers. Their reputation and expertise is such that many of the most prestigious manufactures utilise their services. We are proud to be an integral part of our client's continuing success which has resulted in a bulging order book and a recent expansion to a new purpose designed production facility. The company received the Queens Award for Enterprise in 2016. The ROLE Due to continued expansion an opportunity has arisen for a skilled MiG welder to become an integral part of our Client's production team. Duties will include; Welding activities to a good standard using MIG welding on common welded joints Fabricate parts from drawings Prepare parts for welding (saw, pillar drill, grinding, pipe bending, pipe threading, weld preparation) The CANDIDATE The right candidate will possess; Experience within a similar environment Skilled at MIG Mechanical Engineering background Ability to read Manufacturing Drawings The desire and ability to contribute to the team Excellent verbal & written communication skills Salary: 26-31,000pa equivalent of 13.33ph to 15.90ph + Overtime The Package In return our offers; Company Pension Scheme A generous 25 days holiday + statutory holidays Variable, discretionary bonus Structured career development, setting SMART objectives together with the employee including training requirements Based in Daventry this role is commutable from: Daventry Corby Kettering Northampton Wellingborough Rushden Towcester Southam Leamington Spa Wellingborough Milton Keynes Rugby Coventry Warwick Banbury Leicester Market Harborough Mana Resourcing is a specialist recruitment company working within the Engineering, Sales, IT and Commercial sectors. We are established to service and support the recruitment requirements of modern businesses and candidates alike. Alternative Titles: MIG Welder, Welder, Skilled MiG Welder. Welder Fabricator, Multi-skilled Welder, Senior Welder, Class 1 Welder, Coded Welder, Fabricator INAND1

Mike Collins Recruitment are recruiting a skilled TIG Welder/Fabricator to join our busy client based in Brierley Hill. Duties: TIG welding and fabrication of industrial pipework, working from engineering drawings, Set up and operate welding equipment, including power tools and hand tools, Clean and prepare surfaces for welding by removing rust, dirt, and debris, Assemble fabricated metal parts using various techniques such as bolting, riveting, or welding, Inspect welded joints for quality and accuracy, Will be required to MIG Weld as and when needed so must have previous MIG experience, Perform basic math calculations to measure and cut materials accurately, Follow safety protocols and maintain a clean work area. Skills: Previous TIG welding and fabrication experience, Strong mechanical knowledge and understanding of metal fabrication principles, Ability to read engineering drawings, and welding symbols, Use of power tools and hand tools used in metal fabrication, Knowledge of pipe fabrication is preferred, Basic math skills for measurements and calculations. Hours of work: Monday to Thursday 7.30am - 4.30pm, Friday 7.30am - 1.30pm Rate of pay: 15ph while on 12 week temp to perm, will increase once taken on permanent. We DO NOT offer sponsorships so please only apply if you are a UK resident and have the correct Right to Work documentation.