8 jobs found

CSWIP 3.1 Welding Inspector An excellent opportunity for a proactive CSWIP 3.1 Welding Inspector to support quality assurance, welding inspection, fabrication processes and documentation control within a fast-paced manufacturing environment. If you've also worked in the following roles, we'd also like to hear from you: Weld Inspector, Quality Inspector, Welding Coordinator, NDT Technician, Quality Technician, Fabrication Inspector, Mechanical Technician SALARY: Competitive + Benefits LOCATION: Great Yarmouth, Norfolk (NR31) - candidates must live within a commutable distance JOB TYPE: Full-Time, Permanent WORKING HOURS: 38 hours per week (early finish on Fridays) JOB OVERVIEW We have a fantastic new job opportunity for a CSWIP 3.1 Welding Inspector supporting fabrication, welding, NDT activities and inspection processes across the organisation. As a CSWIP 3.1 Welding Inspector you will monitor welded fabrications, review documentation, maintain quality standards and ensure compliance with specifications and welding procedures. Working as a CSWIP 3.1 Welding Inspector you will contribute to product traceability, support continuous improvement and encourage open communication on safety, quality and working practices. APPLY TODAY Ready to make your next career move? Apply Now for our Recruitment Team to review. DUTIES Your duties as the CSWIP 3.1 Welding Inspector include: Setting Quality and Welding Standards: Maintaining quality levels across fabrication activities Raising NDT Reports: Creating and reviewing documentation for inspection processes Checking Weld Setups: Verifying weld preparations and compliance with specifications Completing Dimensional Checks: Inspecting tack-ups and final fabrications for release Supporting Efficiency Targets: Contributing to planned versus actual hours for the department Reviewing Procedures and Training: Ensuring welding procedures and staff competencies remain up to date Maintaining Documentation: Completing weld mapping, WPS creation, history sheets and consumable control Ensuring Safe Working Practices: Promoting safe systems of work targeting zero lost time accidents Preparing for Audits: Maintaining systems for audit readiness Producing Inspection Reports: Creating clear inspection documentation and highlighting non-conformances Supporting Site Activities: Assisting with installation project inspections when required CANDIDATE REQUIREMENTS Previous experience working in both manufacturing and off-site environments CSWIP 3.1 (minimum qualification requirement) RWC (Responsible Weld Coordinator) or willingness to achieve via TWI interview Experience working within a lead / supervisory role Trained on all aspects of welding equipment Knowledge of ASME, BS Standards Accuracy & Discretion Being able to Read Technical Drawings Teamwork & Motivation Computer Skill (MS Software) BENEFITS 23 days annual holiday allowance plus Bank Holidays and Christmas Eve Birthday leave Wellbeing day Contributory pension scheme Life assurance Occupational health screening HOW TO APPLY To be considered for this job vacancy, please submit your CV to our Recruitment Team who will review your details. CV's of Job Applicants meeting this requirement will be submitted to our Client for consideration. By submitting your job application to us you are hereby giving us your express consent to submit your details to our Client for this purpose. JOB REF: AWDO-P14611 Full-Time, Permanent Welding and Fabrication Inspection Jobs, Careers and Vacancies. Find a new job and work in Great Yarmouth, Norfolk. Multi-Job Board Advertising and CV Sourcing Recruitment Services provided by AWD online. AWD online specialise in sourcing candidates and advertising vacancies on multiple job boards for companies on a non-commission basis. AWD online operates as an employment agency. AWD-IN-SPJ

Field Service Engineer - Heavy & MOD Trailers Department: Service & Maintenance Location: Field-based (UK only) Reports to: Service Coordinator Overview Founded in 1985, Andover Trailers Limited has become a leader in the field of specialist body and trailer manufacturing. We are renowned for our unrivalled engineering standards and the highest quality materials, ensuring our products offer an unmatched combination of strength, durability, and operational ease. Each trailer and body leaving our facility is a testament to our commitment to "Better by Design," tailored to meet the precise needs of our customers now and in the future. Role Purpose To provide high-quality on-site servicing, fault diagnosis, and repair of heavy commercial trailers and MOD trailers. The role requires strong mechanical and electrical skills, a proactive approach, and a commitment to safety and reliability. Key Responsibilities Perform routine maintenance, inspections, and repairs on trailers at customer locations. Diagnose and fix faults in braking systems, suspension, electrical wiring, chassis, and pneumatics. Replace worn or damaged parts and perform minor welding or fabrication when needed. Complete all job documentation, service reports, and timesheets accurately Communicate regularly with the Service Coordinator regarding job status and requirements Ensure all work complies with VOSA, IVA, and MOD standards and specifications Maintain the service van, tools, and stock in a safe and organised manner Work safely and complete site-specific risk assessments prior to starting work Deliver a professional and courteous service to all customers Essential Skills & Experience Proven experience in trailer maintenance and repair (commercial or MOD Strong diagnostic ability across mechanical, pneumatic, and electrical systems. Full UK driving licence Ability to work independently in the field. Good communication and documentation skills Understanding of health and safety practices. Desirable Knowledge of MOD-spec trailer requirements Welding and basic fabrication skills IRTEC certification or similar. Familiarity with EBS/ABS systems and hydraulic components. Working Hours: Monday to Friday, 40 hours per week Overtime available Benefits: Competitive hourly rate or salary (based on experience) Company van, fuel card, and tools provided -Free on site Parking 20 days holiday plus bank holidays -2/3 days gifted by the company for Christmas/New Year Closures No company sick pay (Statutory Sick Pay only) Statutory pension scheme Training and development opportunities Job Types: Full-time, Permanent Pay: £35,000.00-£38,000.00 per year Benefits: Company events Company pension Free parking Life insurance On-site parking Ability to commute/relocate: Andover SP10: reliably commute or be willing to relocate with an employer-provided relocation package (preferred) Work authorisation: United Kingdom (required) Work Location: In person Reference ID: Field Service Engineer - Heavy & MOD Trailers

We need an experienced Production Manager to run our manufacturing facility in Rutland. Reporting into the Managing Director and running a facility which is engineering and assembly, including production planning. There is a genuine Director level career path for you if you are the right person. Your leadership experience should cover some of all the following: machining, fabrication, welding, assembly, coating/spraying. If this is you, please get in touch! BASIC SALARY: Up to £55,000 dependant on your relevant experience BENEFITS: No shifts : Monday - Friday 24 Days Holiday (rises with service) & 8 Bank Holidays Pension Early Friday finish LOCATION: Rutland COMMUTABLE LOCATIONS: Melton Mowbray, Oakham, Corby, Peterborough, Grantham, Stamford, Market Harborough, Leicester, Kettering, Peterborough, Market Deeping, Uppinghan, Desborough, Kettering, Raunds, Wellingborough, Rushden, Oadby, Wigston, Bourne Why you should join us: Production Manager, Manufacturing Manager, Engineering Manager- Engineering, Manufacturing Our parent company is a multi-billion turnover global organisation which is supporting us in our investment into the high growth power sector We have further aggressive growth plans which, will in turn, offer you excellent career prospects in the next 5 years towards senior management Office hours Monday-Friday, no shifts and early finish Friday JOB DESCRIPTION: Production Manager, Manufacturing Manager, Engineering Manager- Engineering, Manufacturing We are looking for our new Production Manager, we are open on where your production experience comes from - but it will be engineering, industrial or machinery related - that could be machinery, equipment or vehicle manufacturing and covering relevant manufacturing processes like machining, fabrication, welding, assembly etc. Our environment is low volume manufacturing, a lot of 1's and 2's and prototyping too. You will be responsible for production planning, and you will be supported by three very capable shop floor Supervisors who are responsible for different areas. About 50% of our machinery and equipment is manufactured for stock, and the other 50% is bespoke machinery or re-engineered to the clients' exact specification - you will be challenged to help improve the functionality of our production facility. You will lead the weekly production meeting with Team Leaders and also report to other Managers and Senior Managers on a regular basis. You will report directly to the Managing Director. RESPONSIBILITIES: Production Manager, Manufacturing Manager, Engineering Manager- Engineering, Manufacturing As our Production Manager, you will : Have responsibility for the successful production and despatch of products to customers Oversee production planning and procurement to ensure parts, components and raw materials are available when needed - so production isn't disrupted Have accountably for reviewing WIP and closing WIP jobs down fully when they're completed Manage production time sheets to ensure production accuracy Support your Supervisors to resolve production issues and manage the shop floor teams Develop and lead the production facility - you can delve into the world of continuous improvement here, but applying a hands-on approach to management where needed REQUIREMENTS: Production Manager, Manufacturing Manager, Engineering Manager- Engineering, Manufacturing You will have proven work experience as a Production Manager, Controller, Coordinator or similar from an engineered, industrial or machinery manufacturing environment We are open on the machinery or equipment you have been involved with producing - but we will give preference to your background if it's Automotive, Special Purpose Machinery, Vehicles or Industrial You will be commercially minded and will focus on customer needs, understanding the impact that your production department can have on the overall business THE COMPANY: Part of a Global group, we design and manufacture our own special purpose machinery and equipment. We supply machines and equipment to the National Grid / Power Grid & smaller energy contractors. We also supply into multiple industry sectors such as Civil Engineering & Telecoms, so you'll be joining a very stable business within solid industry sectors. PROSPECTS: There is a genuine Director level career path for you if you are the right person. It is highly likely you will have worked in any of the following roles and/or markets and worked with the following products and/or services: Production Manager, Production Supervisor, Manufacturing Manager, Engineering Manager, Workshop Manager - production, assembly, fabrication, mechanical, hydraulic, welder, welding. INTERESTED? Please click apply. You will receive an acknowledgement of your application. Wallace Hind Selection, alongside our client embrace diversity, champion equality, and foster inclusion to create a work environment where everyone belongs and thrives. Please Note: Wallace Hind Selection have been chosen as the retained recruitment partner of our client and therefore any direct applications to our client from candidates or agencies will be forwarded on to us direct. REF: JAC18267, Wallace Hind Selection

We need an experienced Production Manager to run our manufacturing facility in Rutland. Reporting into the Managing Director and running a facility which is engineering and assembly, including production planning. There is a genuine Director level career path for you if you are the right person. Your leadership experience should cover some of all the following: machining, fabrication, welding, assembly, coating/spraying. If this is you, please get in touch! BASIC SALARY: Up to £55,000 dependant on your relevant experience BENEFITS: No shifts : Monday - Friday 24 Days Holiday (rises with service) & 8 Bank Holidays Pension Early Friday finish LOCATION: Rutland COMMUTABLE LOCATIONS: Melton Mowbray, Oakham, Corby, Peterborough, Grantham, Stamford, Market Harborough, Leicester, Kettering, Peterborough, Market Deeping, Uppinghan, Desborough, Kettering, Raunds, Wellingborough, Rushden, Oadby, Wigston, Bourne Why you should join us: Production Manager, Manufacturing Manager, Engineering Manager- Engineering, Manufacturing Our parent company is a multi-billion turnover global organisation which is supporting us in our investment into the high growth power sector We have further aggressive growth plans which, will in turn, offer you excellent career prospects in the next 5 years towards senior management Office hours Monday-Friday, no shifts and early finish Friday JOB DESCRIPTION: Production Manager, Manufacturing Manager, Engineering Manager- Engineering, Manufacturing We are looking for our new Production Manager, we are open on where your production experience comes from - but it will be engineering, industrial or machinery related - that could be machinery, equipment or vehicle manufacturing and covering relevant manufacturing processes like machining, fabrication, welding, assembly etc. Our environment is low volume manufacturing, a lot of 1's and 2's and prototyping too. You will be responsible for production planning, and you will be supported by three very capable shop floor Supervisors who are responsible for different areas. About 50% of our machinery and equipment is manufactured for stock, and the other 50% is bespoke machinery or re-engineered to the clients' exact specification - you will be challenged to help improve the functionality of our production facility. You will lead the weekly production meeting with Team Leaders and also report to other Managers and Senior Managers on a regular basis. You will report directly to the Managing Director. RESPONSIBILITIES: Production Manager, Manufacturing Manager, Engineering Manager- Engineering, Manufacturing As our Production Manager, you will : Have responsibility for the successful production and despatch of products to customers Oversee production planning and procurement to ensure parts, components and raw materials are available when needed - so production isn't disrupted Have accountably for reviewing WIP and closing WIP jobs down fully when they're completed Manage production time sheets to ensure production accuracy Support your Supervisors to resolve production issues and manage the shop floor teams Develop and lead the production facility - you can delve into the world of continuous improvement here, but applying a hands-on approach to management where needed REQUIREMENTS: Production Manager, Manufacturing Manager, Engineering Manager- Engineering, Manufacturing You will have proven work experience as a Production Manager, Controller, Coordinator or similar from an engineered, industrial or machinery manufacturing environment We are open on the machinery or equipment you have been involved with producing - but we will give preference to your background if it's Automotive, Special Purpose Machinery, Vehicles or Industrial You will be commercially minded and will focus on customer needs, understanding the impact that your production department can have on the overall business THE COMPANY: Part of a Global group, we design and manufacture our own special purpose machinery and equipment. We supply machines and equipment to the National Grid / Power Grid & smaller energy contractors. We also supply into multiple industry sectors such as Civil Engineering & Telecoms, so you'll be joining a very stable business within solid industry sectors. PROSPECTS: There is a genuine Director level career path for you if you are the right person. It is highly likely you will have worked in any of the following roles and/or markets and worked with the following products and/or services: Production Manager, Production Supervisor, Manufacturing Manager, Engineering Manager, Workshop Manager - production, assembly, fabrication, mechanical, hydraulic, welder, welding. INTERESTED? Please click apply. You will receive an acknowledgement of your application. Wallace Hind Selection, alongside our client embrace diversity, champion equality, and foster inclusion to create a work environment where everyone belongs and thrives. Please Note: Wallace Hind Selection have been chosen as the retained recruitment partner of our client and therefore any direct applications to our client from candidates or agencies will be forwarded on to us direct. REF: JAC18267, Wallace Hind Selection

We need an experienced Production Manager to run our manufacturing facility in Rutland. Reporting into the Managing Director and running a facility which is engineering and assembly, including production planning. There is a genuine Director level career path for you if you are the right person. Your leadership experience should cover some of all the following: machining, fabrication, welding, assembly, coating/spraying. If this is you, please get in touch! BASIC SALARY: Up to £55,000 dependant on your relevant experience BENEFITS: No shifts : Monday - Friday 24 Days Holiday (rises with service) & 8 Bank Holidays Pension Early Friday finish LOCATION: Rutland COMMUTABLE LOCATIONS: Melton Mowbray, Oakham, Corby, Peterborough, Grantham, Stamford, Market Harborough, Leicester, Kettering, Peterborough, Market Deeping, Uppinghan, Desborough, Kettering, Raunds, Wellingborough, Rushden, Oadby, Wigston, Bourne Why you should join us: Production Manager, Manufacturing Manager, Engineering Manager- Engineering, Manufacturing Our parent company is a multi-billion turnover global organisation which is supporting us in our investment into the high growth power sector We have further aggressive growth plans which, will in turn, offer you excellent career prospects in the next 5 years towards senior management Office hours Monday-Friday, no shifts and early finish Friday JOB DESCRIPTION: Production Manager, Manufacturing Manager, Engineering Manager- Engineering, Manufacturing We are looking for our new Production Manager, we are open on where your production experience comes from - but it will be engineering, industrial or machinery related - that could be machinery, equipment or vehicle manufacturing and covering relevant manufacturing processes like machining, fabrication, welding, assembly etc. Our environment is low volume manufacturing, a lot of 1's and 2's and prototyping too. You will be responsible for production planning, and you will be supported by three very capable shop floor Supervisors who are responsible for different areas. About 50% of our machinery and equipment is manufactured for stock, and the other 50% is bespoke machinery or re-engineered to the clients' exact specification - you will be challenged to help improve the functionality of our production facility. You will lead the weekly production meeting with Team Leaders and also report to other Managers and Senior Managers on a regular basis. You will report directly to the Managing Director. RESPONSIBILITIES: Production Manager, Manufacturing Manager, Engineering Manager- Engineering, Manufacturing As our Production Manager, you will : Have responsibility for the successful production and despatch of products to customers Oversee production planning and procurement to ensure parts, components and raw materials are available when needed - so production isn't disrupted Have accountably for reviewing WIP and closing WIP jobs down fully when they're completed Manage production time sheets to ensure production accuracy Support your Supervisors to resolve production issues and manage the shop floor teams Develop and lead the production facility - you can delve into the world of continuous improvement here, but applying a hands-on approach to management where needed REQUIREMENTS: Production Manager, Manufacturing Manager, Engineering Manager- Engineering, Manufacturing You will have proven work experience as a Production Manager, Controller, Coordinator or similar from an engineered, industrial or machinery manufacturing environment We are open on the machinery or equipment you have been involved with producing - but we will give preference to your background if it's Automotive, Special Purpose Machinery, Vehicles or Industrial You will be commercially minded and will focus on customer needs, understanding the impact that your production department can have on the overall business THE COMPANY: Part of a Global group, we design and manufacture our own special purpose machinery and equipment. We supply machines and equipment to the National Grid / Power Grid & smaller energy contractors. We also supply into multiple industry sectors such as Civil Engineering & Telecoms, so you'll be joining a very stable business within solid industry sectors. PROSPECTS: There is a genuine Director level career path for you if you are the right person. It is highly likely you will have worked in any of the following roles and/or markets and worked with the following products and/or services: Production Manager, Production Supervisor, Manufacturing Manager, Engineering Manager, Workshop Manager - production, assembly, fabrication, mechanical, hydraulic, welder, welding. INTERESTED? Please click apply. You will receive an acknowledgement of your application. Wallace Hind Selection, alongside our client embrace diversity, champion equality, and foster inclusion to create a work environment where everyone belongs and thrives. Please Note: Wallace Hind Selection have been chosen as the retained recruitment partner of our client and therefore any direct applications to our client from candidates or agencies will be forwarded on to us direct. REF: JAC18267, Wallace Hind Selection

We need an experienced Production Manager to run our manufacturing facility in Rutland. Reporting into the Managing Director and running a facility which is engineering and assembly, including production planning. There is a genuine Director level career path for you if you are the right person. Your leadership experience should cover some of all the following: machining, fabrication, welding, assembly, coating/spraying. If this is you, please get in touch! BASIC SALARY: Up to £55,000 dependant on your relevant experience BENEFITS: No shifts : Monday - Friday 24 Days Holiday (rises with service) & 8 Bank Holidays Pension Early Friday finish LOCATION: Rutland COMMUTABLE LOCATIONS: Melton Mowbray, Oakham, Corby, Peterborough, Grantham, Stamford, Market Harborough, Leicester, Kettering, Peterborough, Market Deeping, Uppinghan, Desborough, Kettering, Raunds, Wellingborough, Rushden, Oadby, Wigston, Bourne Why you should join us: Production Manager, Manufacturing Manager, Engineering Manager- Engineering, Manufacturing Our parent company is a multi-billion turnover global organisation which is supporting us in our investment into the high growth power sector We have further aggressive growth plans which, will in turn, offer you excellent career prospects in the next 5 years towards senior management Office hours Monday-Friday, no shifts and early finish Friday JOB DESCRIPTION: Production Manager, Manufacturing Manager, Engineering Manager- Engineering, Manufacturing We are looking for our new Production Manager, we are open on where your production experience comes from - but it will be engineering, industrial or machinery related - that could be machinery, equipment or vehicle manufacturing and covering relevant manufacturing processes like machining, fabrication, welding, assembly etc. Our environment is low volume manufacturing, a lot of 1's and 2's and prototyping too. You will be responsible for production planning, and you will be supported by three very capable shop floor Supervisors who are responsible for different areas. About 50% of our machinery and equipment is manufactured for stock, and the other 50% is bespoke machinery or re-engineered to the clients' exact specification - you will be challenged to help improve the functionality of our production facility. You will lead the weekly production meeting with Team Leaders and also report to other Managers and Senior Managers on a regular basis. You will report directly to the Managing Director. RESPONSIBILITIES: Production Manager, Manufacturing Manager, Engineering Manager- Engineering, Manufacturing As our Production Manager, you will : Have responsibility for the successful production and despatch of products to customers Oversee production planning and procurement to ensure parts, components and raw materials are available when needed - so production isn't disrupted Have accountably for reviewing WIP and closing WIP jobs down fully when they're completed Manage production time sheets to ensure production accuracy Support your Supervisors to resolve production issues and manage the shop floor teams Develop and lead the production facility - you can delve into the world of continuous improvement here, but applying a hands-on approach to management where needed REQUIREMENTS: Production Manager, Manufacturing Manager, Engineering Manager- Engineering, Manufacturing You will have proven work experience as a Production Manager, Controller, Coordinator or similar from an engineered, industrial or machinery manufacturing environment We are open on the machinery or equipment you have been involved with producing - but we will give preference to your background if it's Automotive, Special Purpose Machinery, Vehicles or Industrial You will be commercially minded and will focus on customer needs, understanding the impact that your production department can have on the overall business THE COMPANY: Part of a Global group, we design and manufacture our own special purpose machinery and equipment. We supply machines and equipment to the National Grid / Power Grid & smaller energy contractors. We also supply into multiple industry sectors such as Civil Engineering & Telecoms, so you'll be joining a very stable business within solid industry sectors. PROSPECTS: There is a genuine Director level career path for you if you are the right person. It is highly likely you will have worked in any of the following roles and/or markets and worked with the following products and/or services: Production Manager, Production Supervisor, Manufacturing Manager, Engineering Manager, Workshop Manager - production, assembly, fabrication, mechanical, hydraulic, welder, welding. INTERESTED? Please click apply. You will receive an acknowledgement of your application. Wallace Hind Selection, alongside our client embrace diversity, champion equality, and foster inclusion to create a work environment where everyone belongs and thrives. Please Note: Wallace Hind Selection have been chosen as the retained recruitment partner of our client and therefore any direct applications to our client from candidates or agencies will be forwarded on to us direct. REF: JAC18267, Wallace Hind Selection

We need an experienced Production Manager to run our manufacturing facility in Rutland. Reporting into the Managing Director and running a facility which is engineering and assembly, including production planning. There is a genuine Director level career path for you if you are the right person. Your leadership experience should cover some of all the following: machining, fabrication, welding, assembly, coating/spraying. If this is you, please get in touch! BASIC SALARY: Up to £55,000 dependant on your relevant experience BENEFITS: No shifts : Monday - Friday 24 Days Holiday (rises with service) & 8 Bank Holidays Pension Early Friday finish LOCATION: Rutland COMMUTABLE LOCATIONS: Melton Mowbray, Oakham, Corby, Peterborough, Grantham, Stamford, Market Harborough, Leicester, Kettering, Peterborough, Market Deeping, Uppinghan, Desborough, Kettering, Raunds, Wellingborough, Rushden, Oadby, Wigston, Bourne Why you should join us: Production Manager, Manufacturing Manager, Engineering Manager- Engineering, Manufacturing Our parent company is a multi-billion turnover global organisation which is supporting us in our investment into the high growth power sector We have further aggressive growth plans which, will in turn, offer you excellent career prospects in the next 5 years towards senior management Office hours Monday-Friday, no shifts and early finish Friday JOB DESCRIPTION: Production Manager, Manufacturing Manager, Engineering Manager- Engineering, Manufacturing We are looking for our new Production Manager, we are open on where your production experience comes from - but it will be engineering, industrial or machinery related - that could be machinery, equipment or vehicle manufacturing and covering relevant manufacturing processes like machining, fabrication, welding, assembly etc. Our environment is low volume manufacturing, a lot of 1's and 2's and prototyping too. You will be responsible for production planning, and you will be supported by three very capable shop floor Supervisors who are responsible for different areas. About 50% of our machinery and equipment is manufactured for stock, and the other 50% is bespoke machinery or re-engineered to the clients' exact specification - you will be challenged to help improve the functionality of our production facility. You will lead the weekly production meeting with Team Leaders and also report to other Managers and Senior Managers on a regular basis. You will report directly to the Managing Director. RESPONSIBILITIES: Production Manager, Manufacturing Manager, Engineering Manager- Engineering, Manufacturing As our Production Manager, you will : Have responsibility for the successful production and despatch of products to customers Oversee production planning and procurement to ensure parts, components and raw materials are available when needed - so production isn't disrupted Have accountably for reviewing WIP and closing WIP jobs down fully when they're completed Manage production time sheets to ensure production accuracy Support your Supervisors to resolve production issues and manage the shop floor teams Develop and lead the production facility - you can delve into the world of continuous improvement here, but applying a hands-on approach to management where needed REQUIREMENTS: Production Manager, Manufacturing Manager, Engineering Manager- Engineering, Manufacturing You will have proven work experience as a Production Manager, Controller, Coordinator or similar from an engineered, industrial or machinery manufacturing environment We are open on the machinery or equipment you have been involved with producing - but we will give preference to your background if it's Automotive, Special Purpose Machinery, Vehicles or Industrial You will be commercially minded and will focus on customer needs, understanding the impact that your production department can have on the overall business THE COMPANY: Part of a Global group, we design and manufacture our own special purpose machinery and equipment. We supply machines and equipment to the National Grid / Power Grid & smaller energy contractors. We also supply into multiple industry sectors such as Civil Engineering & Telecoms, so you'll be joining a very stable business within solid industry sectors. PROSPECTS: There is a genuine Director level career path for you if you are the right person. It is highly likely you will have worked in any of the following roles and/or markets and worked with the following products and/or services: Production Manager, Production Supervisor, Manufacturing Manager, Engineering Manager, Workshop Manager - production, assembly, fabrication, mechanical, hydraulic, welder, welding. INTERESTED? Please click apply. You will receive an acknowledgement of your application. Wallace Hind Selection, alongside our client embrace diversity, champion equality, and foster inclusion to create a work environment where everyone belongs and thrives. Please Note: Wallace Hind Selection have been chosen as the retained recruitment partner of our client and therefore any direct applications to our client from candidates or agencies will be forwarded on to us direct. REF: JAC18267, Wallace Hind Selection

Quality Manager & Responsible Welding Coordinator Steelway 6- Month FTC Competitive - based on experience (pro-rata) Queensgate Works, Bilston Road, Wolverhampton, West Midlands, WV2 2NJ Steelway are a leading metal fabrication specialist, committed to delivering high-quality products and services to our customers. We are now looking for an experienced Quality Manager to take ownership of our Quality Management System and act as our Responsible Welding Coordinator (RWC). This is a hands-on role, where you will review, develop, and implement processes that ensure compliance, efficiency, and continual improvement across the business. Key Responsibilities: Quality Management System (QMS): Review, update, and improve the company s QMS in line with current business needs. Align processes where possible with group systems, highlighting any gaps. Create and implement processes, procedures, and supporting documentation. Develop and roll out training and guidance to staff. Establish an internal audit schedule, conduct audits, and recruit/train internal auditors. Overhaul the QMS filing system to be user-friendly and accessible. Introduce and embed a robust internal and external NCR system. Quality Inspection: Define and implement inspection requirements for the manufacturing process. Asist in identifying, recruiting and managing quality inspectors as needed. Track and report on KPIs to demonstrate inspection effectiveness. Ensure NDT testing is carried out in line with requirements, monitoring results and corrective actions. Operational Quality Support: Develop quality plans for customer orders and agree these with internal teams and clients. Oversee adherence to quality plans, holding stakeholders accountable. Arrange and host internal and third-party inspections, managing external auditors and assessors. Responsible Welding Coordinator: Ensure compliance with EN1090, maintaining all required welding procedures. Oversee WPS and related documentation. Provide training and guidance to welding staff to meet required standards. Liaise with the external Welding Coordinator to improve processes and strengthen compliance. About You: Strong knowledge of EN1090 and welding requirements. Proven experience implementing and managing QMS systems (ISO9001 minimum). Background in quality within a steel fabrication environment. Practical, hands-on approach not a consultancy role, but someone who takes ownership. Excellent IT skills and ability to create clear, structured documentation. Strong communicator, with the ability to influence and support at all levels. What We Offer: 33 days holiday including Bank Holidays and Christmas shutdown Competitive salary, dependent on experience Company pension scheme On-site parking Opportunities for training and development Bank Holidays off & Christmas shutdown If you are a quality professional with a strong background in steel fabrication and a practical approach to leadership, this is an excellent opportunity to make a real impact. Apply today and join Steelway as our new Quality Manager & Responsible Welding Coordinator.