Role - Quality Inspector Location - Buckinghamshire Salary - £40,000 - £45,000 per annum We are seeking a Senior Quality Inspector to join a busy manufacturing business. This role involves carrying out detailed inspection activities while also supporting the inspection team and helping maintain high quality standards across production. Key Responsibilities Carry out first-off, in-process, and final inspections on manufactured components and assemblies Support and guide members of the inspection team where required Conduct NDT dye penetrant testing on parts and finished assemblies Produce First Article Inspection Reports (FAIRs) when required Program and operate CMM and Faro Arm measurement equipment Review engineering drawings and geometric tolerances to ensure parts meet specification Investigate and record non-conformances, assisting with root cause analysis and corrective actions Ensure inspection equipment is calibrated and maintained Inspect incoming components from suppliers as well as internally manufactured parts Maintain clear and accurate inspection records and documentation Liaise with internal departments and occasionally support customer-related quality queries Skills & Experience Solid experience within a quality inspection role in a manufacturing environment Level 2 certification in Dye Penetrant Testing (NDT) Practical experience operating CMM and Faro Arm equipment Strong understanding of engineering drawings and tolerancing Experience creating or supporting First Article Inspection Reports Comfortable using a variety of manual inspection tools and measurement equipment Good organisational skills and the ability to communicate effectively with colleagues across production, engineering, and quality teams
Apr 28, 2026
Full time
Role - Quality Inspector Location - Buckinghamshire Salary - £40,000 - £45,000 per annum We are seeking a Senior Quality Inspector to join a busy manufacturing business. This role involves carrying out detailed inspection activities while also supporting the inspection team and helping maintain high quality standards across production. Key Responsibilities Carry out first-off, in-process, and final inspections on manufactured components and assemblies Support and guide members of the inspection team where required Conduct NDT dye penetrant testing on parts and finished assemblies Produce First Article Inspection Reports (FAIRs) when required Program and operate CMM and Faro Arm measurement equipment Review engineering drawings and geometric tolerances to ensure parts meet specification Investigate and record non-conformances, assisting with root cause analysis and corrective actions Ensure inspection equipment is calibrated and maintained Inspect incoming components from suppliers as well as internally manufactured parts Maintain clear and accurate inspection records and documentation Liaise with internal departments and occasionally support customer-related quality queries Skills & Experience Solid experience within a quality inspection role in a manufacturing environment Level 2 certification in Dye Penetrant Testing (NDT) Practical experience operating CMM and Faro Arm equipment Strong understanding of engineering drawings and tolerancing Experience creating or supporting First Article Inspection Reports Comfortable using a variety of manual inspection tools and measurement equipment Good organisational skills and the ability to communicate effectively with colleagues across production, engineering, and quality teams
Night Shift Quality Control Inspector Precision Manufacturing Monday-Thursday 17:00 - 03:15 If you're someone who takes real pride in precision and enjoys being the final checkpoint between production and perfection, this night shift QC role offers the autonomy and responsibility to make a genuine impact. Working at the heart of the inspection function, you'll be trusted to ensure that every component leaving the facility meets exacting standards - from first-off approval through to final verification. The Role - What You'll Own This isn't just ticking boxes - you'll be a key part of safeguarding product integrity across the full manufacturing lifecycle. Carry out detailed inspection of parts, assemblies, and sub-assemblies against engineering drawings and customer specifications Take responsibility for first-off inspection to keep production running efficiently and right-first-time Produce and compile First Article Inspection Reports (FAIRs) with full traceability Ensure all inspection records are accurate, complete, and audit-ready Support goods inward inspection and verify incoming components Identify, log, and escalate non-conformances in line with company procedures Work closely with production and quality engineering to resolve issues and prevent recurrence Contribute to root cause analysis and continuous improvement activity Maintain strict adherence to Quality, HSE, and compliance standards What You'll Bring We're looking for someone who combines technical capability with a proactive, quality-first mindset. Strong experience in precision inspection within a manufacturing environment Confident using a range of inspection tools, gauges, and measuring equipment , including CMM Ability to read and interpret complex engineering drawings (metric & imperial) Experience producing or supporting FAIR documentation Knowledge of quality standards and inspection processes Comfortable working independently on a night shift Desirable (but not essential) Aerospace or highly regulated industry experience Exposure to ERP/MRP systems (Javelin advantageous) Awareness of MSA, SPC, NDT, ISO/ASME standards How to Apply To apply for this exclusive opportunity, please submit an up-to-date CV by clicking the Apply button, or contact me directly for a confidential discussion. If you have not been contacted by A1 Personnel within two weeks of submitting your application, please assume that your CV has not been shortlisted on this occasion. A1 Personnel is acting as a specialist recruitment consultancy in relation to this vacancy
Apr 25, 2026
Full time
Night Shift Quality Control Inspector Precision Manufacturing Monday-Thursday 17:00 - 03:15 If you're someone who takes real pride in precision and enjoys being the final checkpoint between production and perfection, this night shift QC role offers the autonomy and responsibility to make a genuine impact. Working at the heart of the inspection function, you'll be trusted to ensure that every component leaving the facility meets exacting standards - from first-off approval through to final verification. The Role - What You'll Own This isn't just ticking boxes - you'll be a key part of safeguarding product integrity across the full manufacturing lifecycle. Carry out detailed inspection of parts, assemblies, and sub-assemblies against engineering drawings and customer specifications Take responsibility for first-off inspection to keep production running efficiently and right-first-time Produce and compile First Article Inspection Reports (FAIRs) with full traceability Ensure all inspection records are accurate, complete, and audit-ready Support goods inward inspection and verify incoming components Identify, log, and escalate non-conformances in line with company procedures Work closely with production and quality engineering to resolve issues and prevent recurrence Contribute to root cause analysis and continuous improvement activity Maintain strict adherence to Quality, HSE, and compliance standards What You'll Bring We're looking for someone who combines technical capability with a proactive, quality-first mindset. Strong experience in precision inspection within a manufacturing environment Confident using a range of inspection tools, gauges, and measuring equipment , including CMM Ability to read and interpret complex engineering drawings (metric & imperial) Experience producing or supporting FAIR documentation Knowledge of quality standards and inspection processes Comfortable working independently on a night shift Desirable (but not essential) Aerospace or highly regulated industry experience Exposure to ERP/MRP systems (Javelin advantageous) Awareness of MSA, SPC, NDT, ISO/ASME standards How to Apply To apply for this exclusive opportunity, please submit an up-to-date CV by clicking the Apply button, or contact me directly for a confidential discussion. If you have not been contacted by A1 Personnel within two weeks of submitting your application, please assume that your CV has not been shortlisted on this occasion. A1 Personnel is acting as a specialist recruitment consultancy in relation to this vacancy
Principal Quality Engineer Role Purpose The Principal Quality Engineer is responsible for overseeing the execution and continuous improvement of quality processes to ensure compliance with customer, regulatory, and internal standards, particularly AS9100, ITAR, and NADCAP. This role provides technical leadership in quality engineering, supports strategic quality initiatives, and mentors the wider quality team to uphold rigorous standards in aerospace and defence gear manufacturing. Key Responsibilities Leadership and Oversight: Lead day-to-day quality engineering activities and provide mentorship to other Quality Engineers and Inspectors. Act as deputy to the Quality Manager where appropriate and support high-level decision-making on quality matters. Represent the Quality function in internal project teams, customer quality meetings, and regulatory audits. Compliance and Systems Management: Ensure ongoing compliance with AS9100, NADCAP, ISO 9001, ITAR, and customer-specific requirements. Drive maintenance and continual improvement of the Quality Management System (QMS), ensuring documentation, records, and procedures are fully aligned with certification standards. Support preparation and execution of external audits (certification, NADCAP, customer, and regulatory). Technical Quality Engineering: Lead or coordinate advanced quality planning activities including APQP, PPAP, control plans, FMEAs, and FAIRs (AS9102). Ensure robust inspection and test methods are in place for gear manufacturing processes (e.g. hobbing, grinding, heat treatment, NDT). Champion the use of risk-based thinking and structured problem-solving methodologies. NADCAP and Special Processes: Oversee compliance and audit readiness for NADCAP-accredited processes (e.g. heat treatment, NDT, coatings). Liaise with special process owners to ensure qualification and requalification activities meet NADCAP requirements. ITAR and Export Compliance: Ensure quality activities, data handling, and document control meet ITAR and UK Export Control requirements. Act as quality liaison for defence contracts requiring export licensing and controlled technical data. Root Cause and Continuous Improvement: Lead high-priority root cause investigations and corrective/preventive actions (RCA/CAPA). Drive cross-functional initiatives for process capability improvement, yield enhancement, and defect reduction. Monitor and report on key quality metrics (KPIs), using data to identify trends and opportunities for improvement. Required Skills and Competencies: Expert knowledge of AS9100, NADCAP, ITAR, and ISO 9001 standards. Proven leadership in Quality engineering within aerospace or defence sectors, including training and mentoring. Experience with gear manufacturing processes and associated quality challenges. Strong analytical and problem-solving skills (8D, DMAIC, 5 Whys, Fishbone). Ability to interpret complex technical drawings, specifications, and GD&T. Familiarity with quality tools: SPC, MSA, FMEA, APQP, PPAP, FAIRs. Comfortable working in regulated environments with strong attention to detail and compliance. Qualifications and Experience: Degree or HND/HNC in Engineering, Manufacturing, or Quality (or equivalent). Minimum 7 years experience in quality roles within aerospace/defence. Trained AS9100 and NADCAP internal auditor. Demonstrable experience managing NADCAP-accredited special processes. Knowledge of ITAR and UK Export Control compliance in a manufacturing context. Six Sigma Green or Black Belt certification (desirable). Chartered Engineer (CEng) status or working toward (desirable). Benefits: Employer pension contribution (6%) Annual bonus 25+ days holiday Training and development funding Life assurance
Apr 24, 2026
Full time
Principal Quality Engineer Role Purpose The Principal Quality Engineer is responsible for overseeing the execution and continuous improvement of quality processes to ensure compliance with customer, regulatory, and internal standards, particularly AS9100, ITAR, and NADCAP. This role provides technical leadership in quality engineering, supports strategic quality initiatives, and mentors the wider quality team to uphold rigorous standards in aerospace and defence gear manufacturing. Key Responsibilities Leadership and Oversight: Lead day-to-day quality engineering activities and provide mentorship to other Quality Engineers and Inspectors. Act as deputy to the Quality Manager where appropriate and support high-level decision-making on quality matters. Represent the Quality function in internal project teams, customer quality meetings, and regulatory audits. Compliance and Systems Management: Ensure ongoing compliance with AS9100, NADCAP, ISO 9001, ITAR, and customer-specific requirements. Drive maintenance and continual improvement of the Quality Management System (QMS), ensuring documentation, records, and procedures are fully aligned with certification standards. Support preparation and execution of external audits (certification, NADCAP, customer, and regulatory). Technical Quality Engineering: Lead or coordinate advanced quality planning activities including APQP, PPAP, control plans, FMEAs, and FAIRs (AS9102). Ensure robust inspection and test methods are in place for gear manufacturing processes (e.g. hobbing, grinding, heat treatment, NDT). Champion the use of risk-based thinking and structured problem-solving methodologies. NADCAP and Special Processes: Oversee compliance and audit readiness for NADCAP-accredited processes (e.g. heat treatment, NDT, coatings). Liaise with special process owners to ensure qualification and requalification activities meet NADCAP requirements. ITAR and Export Compliance: Ensure quality activities, data handling, and document control meet ITAR and UK Export Control requirements. Act as quality liaison for defence contracts requiring export licensing and controlled technical data. Root Cause and Continuous Improvement: Lead high-priority root cause investigations and corrective/preventive actions (RCA/CAPA). Drive cross-functional initiatives for process capability improvement, yield enhancement, and defect reduction. Monitor and report on key quality metrics (KPIs), using data to identify trends and opportunities for improvement. Required Skills and Competencies: Expert knowledge of AS9100, NADCAP, ITAR, and ISO 9001 standards. Proven leadership in Quality engineering within aerospace or defence sectors, including training and mentoring. Experience with gear manufacturing processes and associated quality challenges. Strong analytical and problem-solving skills (8D, DMAIC, 5 Whys, Fishbone). Ability to interpret complex technical drawings, specifications, and GD&T. Familiarity with quality tools: SPC, MSA, FMEA, APQP, PPAP, FAIRs. Comfortable working in regulated environments with strong attention to detail and compliance. Qualifications and Experience: Degree or HND/HNC in Engineering, Manufacturing, or Quality (or equivalent). Minimum 7 years experience in quality roles within aerospace/defence. Trained AS9100 and NADCAP internal auditor. Demonstrable experience managing NADCAP-accredited special processes. Knowledge of ITAR and UK Export Control compliance in a manufacturing context. Six Sigma Green or Black Belt certification (desirable). Chartered Engineer (CEng) status or working toward (desirable). Benefits: Employer pension contribution (6%) Annual bonus 25+ days holiday Training and development funding Life assurance
About the Role We are seeking an experienced Agricultural Mechanic with a proven track record in the preparation of agricultural machinery for phytosanitary certification and international export. The successful candidate will combine strong mechanical ability with a thorough understanding of phytosanitary regulations, biosecurity protocols, and the standards required to ensure machinery is certified clean and pest-free for shipment across international borders. Key Responsibilities • Carry out thorough mechanical inspections, servicing, and repairs on a wide range of agricultural machinery including tractors, combines, cultivators, drills, and sprayers • Prepare machinery to phytosanitary standards by performing deep cleaning, steam washing, decontamination, and removal of all soil, plant material, seeds, and biological contaminants • Inspect machinery post-clean to ensure it meets the requirements for phytosanitary certification, documenting the process with photographs and written records as required • Liaise with APHA (Animal and Plant Health Agency) inspectors or equivalent bodies to facilitate inspections and obtain phytosanitary certificates for export consignments • Disassemble and reassemble machine components where necessary to access hard-to-reach areas for cleaning and inspection (e.g., undercarriages, auger housings, seed metering units) • Carry out pre-export mechanical preparation including fluid changes, safety checks, transport securing, and cosmetic presentation • Maintain detailed records of all preparation work, including cleaning logs, inspection checklists, and certification paperwork • Diagnose and repair mechanical, hydraulic, and basic electrical faults across a range of farm equipment • Coordinate with the logistics and sales teams on export timelines and machinery readiness • Ensure all work complies with health and safety regulations and environmental standards for wash-down and waste disposal Skills & Requirements • Proven experience as an agricultural mechanic, ideally within a dealership, export, or contracting environment • Hands-on experience preparing machinery for phytosanitary inspection and international export• Strong understanding of ISPM 15, phytosanitary regulations, and biosecurity requirements for used machinery exports • City & Guilds / NVQ Level 2 or 3 in Agricultural or Land-Based Engineering (or equivalent) • Good working knowledge of hydraulic systems, transmissions, and engine diagnostics • Meticulous attention to detail the ability to ensure every component is free from contaminants • Ability to read and interpret technical manuals, parts diagrams, and service bulletins • Full UK driving licence (essential) • Strong organisational skills with the ability to manage multiple machines to tight export deadlines • Professional and reliable with excellent communication skills Desirable • Experience with APHA inspection processes and export documentation • Forklift or telehandler licence • Welding and fabrication skills (MIG/TIG) • PA1/PA2 spraying certificates • Experience with specific manufacturer brands (e.g., John Deere, Case IH, New Holland, Fendt, CLAAS) • Knowledge of international shipping and container loading procedures for machinery What's on Offer • Competitive salary dependent on experience • Ongoing training and professional development • Pension scheme and holiday entitlement • Opportunity to work on a diverse range of machinery destined for markets worldwide • Supportive team environment with genuine career progression How to Apply For a confidential discussion or to apply, please contact Sam at (url removed). We truly value each and every candidate and are committed to finding the right opportunity for you.
Apr 23, 2026
Full time
About the Role We are seeking an experienced Agricultural Mechanic with a proven track record in the preparation of agricultural machinery for phytosanitary certification and international export. The successful candidate will combine strong mechanical ability with a thorough understanding of phytosanitary regulations, biosecurity protocols, and the standards required to ensure machinery is certified clean and pest-free for shipment across international borders. Key Responsibilities • Carry out thorough mechanical inspections, servicing, and repairs on a wide range of agricultural machinery including tractors, combines, cultivators, drills, and sprayers • Prepare machinery to phytosanitary standards by performing deep cleaning, steam washing, decontamination, and removal of all soil, plant material, seeds, and biological contaminants • Inspect machinery post-clean to ensure it meets the requirements for phytosanitary certification, documenting the process with photographs and written records as required • Liaise with APHA (Animal and Plant Health Agency) inspectors or equivalent bodies to facilitate inspections and obtain phytosanitary certificates for export consignments • Disassemble and reassemble machine components where necessary to access hard-to-reach areas for cleaning and inspection (e.g., undercarriages, auger housings, seed metering units) • Carry out pre-export mechanical preparation including fluid changes, safety checks, transport securing, and cosmetic presentation • Maintain detailed records of all preparation work, including cleaning logs, inspection checklists, and certification paperwork • Diagnose and repair mechanical, hydraulic, and basic electrical faults across a range of farm equipment • Coordinate with the logistics and sales teams on export timelines and machinery readiness • Ensure all work complies with health and safety regulations and environmental standards for wash-down and waste disposal Skills & Requirements • Proven experience as an agricultural mechanic, ideally within a dealership, export, or contracting environment • Hands-on experience preparing machinery for phytosanitary inspection and international export• Strong understanding of ISPM 15, phytosanitary regulations, and biosecurity requirements for used machinery exports • City & Guilds / NVQ Level 2 or 3 in Agricultural or Land-Based Engineering (or equivalent) • Good working knowledge of hydraulic systems, transmissions, and engine diagnostics • Meticulous attention to detail the ability to ensure every component is free from contaminants • Ability to read and interpret technical manuals, parts diagrams, and service bulletins • Full UK driving licence (essential) • Strong organisational skills with the ability to manage multiple machines to tight export deadlines • Professional and reliable with excellent communication skills Desirable • Experience with APHA inspection processes and export documentation • Forklift or telehandler licence • Welding and fabrication skills (MIG/TIG) • PA1/PA2 spraying certificates • Experience with specific manufacturer brands (e.g., John Deere, Case IH, New Holland, Fendt, CLAAS) • Knowledge of international shipping and container loading procedures for machinery What's on Offer • Competitive salary dependent on experience • Ongoing training and professional development • Pension scheme and holiday entitlement • Opportunity to work on a diverse range of machinery destined for markets worldwide • Supportive team environment with genuine career progression How to Apply For a confidential discussion or to apply, please contact Sam at (url removed). We truly value each and every candidate and are committed to finding the right opportunity for you.
A long-established manufacturing and fabrication business is seeking a skilled Dimensional Quality Inspector to join its quality and inspection team. This role plays a key part in ensuring products meet required specifications, standards, and customer expectations. Key Responsibilities of a Dimensional Quality Inspector Carry out detailed dimensional inspections on fabricated and machined components Verify components against engineering drawings, tolerances, and quality requirements Perform in-process and final inspections throughout the production cycle Use a range of precision measuring equipment (verniers, micrometers, height gauges, etc.) Identify, record, and report non-conformances and inspection results Support root cause investigations and corrective actions where required Liaise with production and quality personnel to ensure compliance with internal and customer standards Skills & Experience of a Dimensional Quality Inspector Required Demonstrated experience in a Dimensional or Quality Inspection role within an engineering or manufacturing environment Strong ability to read and interpret technical drawings and specifications High level of attention to detail and a methodical approach to inspection tasks Ability to work independently and manage inspection priorities Highly Regarded Experience in Non-Destructive Testing (NDT), particularly: Ultrasonic Testing (UT) Current or previous NDT certifications Hours of Work Monday to Thursday: 7:00am - 3:45pm Friday: 7:00am - 12:30pm
Apr 23, 2026
Full time
A long-established manufacturing and fabrication business is seeking a skilled Dimensional Quality Inspector to join its quality and inspection team. This role plays a key part in ensuring products meet required specifications, standards, and customer expectations. Key Responsibilities of a Dimensional Quality Inspector Carry out detailed dimensional inspections on fabricated and machined components Verify components against engineering drawings, tolerances, and quality requirements Perform in-process and final inspections throughout the production cycle Use a range of precision measuring equipment (verniers, micrometers, height gauges, etc.) Identify, record, and report non-conformances and inspection results Support root cause investigations and corrective actions where required Liaise with production and quality personnel to ensure compliance with internal and customer standards Skills & Experience of a Dimensional Quality Inspector Required Demonstrated experience in a Dimensional or Quality Inspection role within an engineering or manufacturing environment Strong ability to read and interpret technical drawings and specifications High level of attention to detail and a methodical approach to inspection tasks Ability to work independently and manage inspection priorities Highly Regarded Experience in Non-Destructive Testing (NDT), particularly: Ultrasonic Testing (UT) Current or previous NDT certifications Hours of Work Monday to Thursday: 7:00am - 3:45pm Friday: 7:00am - 12:30pm
Orchard Professional Solutions Ltd
Hull, Yorkshire
Job Overview Here at Orchard we are seeking a skilled and detail-oriented Fabricator/Welder to join our manufacturing team. The successful candidate will be responsible for fabricating and welding metal components with precision and efficiency, contributing to the production of high-quality products. This role offers an excellent opportunity for individuals with a strong mechanical aptitude and experience in various welding techniques, particularly MIG welding, to develop their skills within a professional environment. Responsibilities Carry out coded welding on structural steel and fabricated assemblies in accordance with approved Welding Procedure Specifications (WPS) Perform MIG / MAG coded welding (FM1 + FM2) using approved gases (M24) on EN 10025 / EN 1090 CE marked materials Weld material thicknesses ranging from 1mm up to 50mm in all qualified welding positions including PA, PB, PC, PD, PE, PF (OVERHEAD / UPHILL) Read and interpret fabrication drawings, weld symbols, and blueprint drawings accurately Set up welding equipment correctly, selecting appropriate consumables and parameters to match WPS requirements Complete pre-weld checks and post-weld visual inspections to required acceptance criteria Work alongside welding inspectors and NDT inspectors, supporting MPI / UT / RT activities as required Rectify weld defects and carry out approved repairs in line with WPS and quality procedures Maintain accurate weld traceability, records, and quality documentation in line with BMS requirements Support manufacture of complex one-off prototypes as well as repeat production components Ensure all welding activities comply with ISO 9001, EN 1090, and internal quality systems Maintain a clean, safe, and organised work area in accordance with Health, Safety & Environmental (HSE) requirements Work collaboratively with the wider production team to meet deadlines and output targets Identify and report defects, material issues, or deviations from specification promptly Assist with mentoring apprentices or less experienced welders when required Contribute to continuous improvement and lean manufacturing initiatives within the fabrication area Desirable Qualifications NVQ Level 2 or 3 in Fabrication & Welding or equivalent qualification. CSCS or CCNSG Safety Passport. Previous experience in structural steel, modular construction, or off-site manufacturing. Understanding of lean manufacturing and quality-controlled production environment Benefits: Perm role from day one Overtime Great pay rates While we will endeavour to respond to every applicant personally, on occasion this is not always possible, therefore, if you have not heard back from us within 14 days of applying, you have been unsuccessful.
Apr 23, 2026
Full time
Job Overview Here at Orchard we are seeking a skilled and detail-oriented Fabricator/Welder to join our manufacturing team. The successful candidate will be responsible for fabricating and welding metal components with precision and efficiency, contributing to the production of high-quality products. This role offers an excellent opportunity for individuals with a strong mechanical aptitude and experience in various welding techniques, particularly MIG welding, to develop their skills within a professional environment. Responsibilities Carry out coded welding on structural steel and fabricated assemblies in accordance with approved Welding Procedure Specifications (WPS) Perform MIG / MAG coded welding (FM1 + FM2) using approved gases (M24) on EN 10025 / EN 1090 CE marked materials Weld material thicknesses ranging from 1mm up to 50mm in all qualified welding positions including PA, PB, PC, PD, PE, PF (OVERHEAD / UPHILL) Read and interpret fabrication drawings, weld symbols, and blueprint drawings accurately Set up welding equipment correctly, selecting appropriate consumables and parameters to match WPS requirements Complete pre-weld checks and post-weld visual inspections to required acceptance criteria Work alongside welding inspectors and NDT inspectors, supporting MPI / UT / RT activities as required Rectify weld defects and carry out approved repairs in line with WPS and quality procedures Maintain accurate weld traceability, records, and quality documentation in line with BMS requirements Support manufacture of complex one-off prototypes as well as repeat production components Ensure all welding activities comply with ISO 9001, EN 1090, and internal quality systems Maintain a clean, safe, and organised work area in accordance with Health, Safety & Environmental (HSE) requirements Work collaboratively with the wider production team to meet deadlines and output targets Identify and report defects, material issues, or deviations from specification promptly Assist with mentoring apprentices or less experienced welders when required Contribute to continuous improvement and lean manufacturing initiatives within the fabrication area Desirable Qualifications NVQ Level 2 or 3 in Fabrication & Welding or equivalent qualification. CSCS or CCNSG Safety Passport. Previous experience in structural steel, modular construction, or off-site manufacturing. Understanding of lean manufacturing and quality-controlled production environment Benefits: Perm role from day one Overtime Great pay rates While we will endeavour to respond to every applicant personally, on occasion this is not always possible, therefore, if you have not heard back from us within 14 days of applying, you have been unsuccessful.
CSWIP 3.1 Welding Inspector An excellent opportunity for a proactive CSWIP 3.1 Welding Inspector to support quality assurance, welding inspection, fabrication processes and documentation control within a fast-paced manufacturing environment. If you've also worked in the following roles, we'd also like to hear from you: Weld Inspector, Quality Inspector, Welding Coordinator, NDT Technician, Quality Technician, Fabrication Inspector, Mechanical Technician SALARY: Competitive + Benefits LOCATION: Great Yarmouth, Norfolk (NR31) - candidates must live within a commutable distance JOB TYPE: Full-Time, Permanent WORKING HOURS: 38 hours per week (early finish on Fridays) JOB OVERVIEW We have a fantastic new job opportunity for a CSWIP 3.1 Welding Inspector supporting fabrication, welding, NDT activities and inspection processes across the organisation. As a CSWIP 3.1 Welding Inspector you will monitor welded fabrications, review documentation, maintain quality standards and ensure compliance with specifications and welding procedures. Working as a CSWIP 3.1 Welding Inspector you will contribute to product traceability, support continuous improvement and encourage open communication on safety, quality and working practices. APPLY TODAY Ready to make your next career move? Apply Now for our Recruitment Team to review. DUTIES Your duties as the CSWIP 3.1 Welding Inspector include: Setting Quality and Welding Standards: Maintaining quality levels across fabrication activities Raising NDT Reports: Creating and reviewing documentation for inspection processes Checking Weld Setups: Verifying weld preparations and compliance with specifications Completing Dimensional Checks: Inspecting tack-ups and final fabrications for release Supporting Efficiency Targets: Contributing to planned versus actual hours for the department Reviewing Procedures and Training: Ensuring welding procedures and staff competencies remain up to date Maintaining Documentation: Completing weld mapping, WPS creation, history sheets and consumable control Ensuring Safe Working Practices: Promoting safe systems of work targeting zero lost time accidents Preparing for Audits: Maintaining systems for audit readiness Producing Inspection Reports: Creating clear inspection documentation and highlighting non-conformances Supporting Site Activities: Assisting with installation project inspections when required CANDIDATE REQUIREMENTS Previous experience working in both manufacturing and off-site environments CSWIP 3.1 (minimum qualification requirement) RWC (Responsible Weld Coordinator) or willingness to achieve via TWI interview Experience working within a lead / supervisory role Trained on all aspects of welding equipment Knowledge of ASME, BS Standards Accuracy & Discretion Being able to Read Technical Drawings Teamwork & Motivation Computer Skill (MS Software) BENEFITS 23 days annual holiday allowance plus Bank Holidays and Christmas Eve Birthday leave Wellbeing day Contributory pension scheme Life assurance Occupational health screening HOW TO APPLY To be considered for this job vacancy, please submit your CV to our Recruitment Team who will review your details. CV's of Job Applicants meeting this requirement will be submitted to our Client for consideration. By submitting your job application to us you are hereby giving us your express consent to submit your details to our Client for this purpose. JOB REF: AWDO-P14611 Full-Time, Permanent Welding and Fabrication Inspection Jobs, Careers and Vacancies. Find a new job and work in Great Yarmouth, Norfolk. Multi-Job Board Advertising and CV Sourcing Recruitment Services provided by AWD online. AWD online specialise in sourcing candidates and advertising vacancies on multiple job boards for companies on a non-commission basis. AWD online operates as an employment agency. AWD-IN-SPJ
Apr 23, 2026
Full time
CSWIP 3.1 Welding Inspector An excellent opportunity for a proactive CSWIP 3.1 Welding Inspector to support quality assurance, welding inspection, fabrication processes and documentation control within a fast-paced manufacturing environment. If you've also worked in the following roles, we'd also like to hear from you: Weld Inspector, Quality Inspector, Welding Coordinator, NDT Technician, Quality Technician, Fabrication Inspector, Mechanical Technician SALARY: Competitive + Benefits LOCATION: Great Yarmouth, Norfolk (NR31) - candidates must live within a commutable distance JOB TYPE: Full-Time, Permanent WORKING HOURS: 38 hours per week (early finish on Fridays) JOB OVERVIEW We have a fantastic new job opportunity for a CSWIP 3.1 Welding Inspector supporting fabrication, welding, NDT activities and inspection processes across the organisation. As a CSWIP 3.1 Welding Inspector you will monitor welded fabrications, review documentation, maintain quality standards and ensure compliance with specifications and welding procedures. Working as a CSWIP 3.1 Welding Inspector you will contribute to product traceability, support continuous improvement and encourage open communication on safety, quality and working practices. APPLY TODAY Ready to make your next career move? Apply Now for our Recruitment Team to review. DUTIES Your duties as the CSWIP 3.1 Welding Inspector include: Setting Quality and Welding Standards: Maintaining quality levels across fabrication activities Raising NDT Reports: Creating and reviewing documentation for inspection processes Checking Weld Setups: Verifying weld preparations and compliance with specifications Completing Dimensional Checks: Inspecting tack-ups and final fabrications for release Supporting Efficiency Targets: Contributing to planned versus actual hours for the department Reviewing Procedures and Training: Ensuring welding procedures and staff competencies remain up to date Maintaining Documentation: Completing weld mapping, WPS creation, history sheets and consumable control Ensuring Safe Working Practices: Promoting safe systems of work targeting zero lost time accidents Preparing for Audits: Maintaining systems for audit readiness Producing Inspection Reports: Creating clear inspection documentation and highlighting non-conformances Supporting Site Activities: Assisting with installation project inspections when required CANDIDATE REQUIREMENTS Previous experience working in both manufacturing and off-site environments CSWIP 3.1 (minimum qualification requirement) RWC (Responsible Weld Coordinator) or willingness to achieve via TWI interview Experience working within a lead / supervisory role Trained on all aspects of welding equipment Knowledge of ASME, BS Standards Accuracy & Discretion Being able to Read Technical Drawings Teamwork & Motivation Computer Skill (MS Software) BENEFITS 23 days annual holiday allowance plus Bank Holidays and Christmas Eve Birthday leave Wellbeing day Contributory pension scheme Life assurance Occupational health screening HOW TO APPLY To be considered for this job vacancy, please submit your CV to our Recruitment Team who will review your details. CV's of Job Applicants meeting this requirement will be submitted to our Client for consideration. By submitting your job application to us you are hereby giving us your express consent to submit your details to our Client for this purpose. JOB REF: AWDO-P14611 Full-Time, Permanent Welding and Fabrication Inspection Jobs, Careers and Vacancies. Find a new job and work in Great Yarmouth, Norfolk. Multi-Job Board Advertising and CV Sourcing Recruitment Services provided by AWD online. AWD online specialise in sourcing candidates and advertising vacancies on multiple job boards for companies on a non-commission basis. AWD online operates as an employment agency. AWD-IN-SPJ
NDT Technician required in South Leicester for an Aerospace component manufacturer - Permanent 3-Shift Rotation £19.16/hr + Bonus & Overtime Immediate Start available. A growing aerospace and power generation components manufacturer is recruiting a skilled NDT Technician / Inspector to join their professional, fast-paced team. Excellent working conditions, clear career progression, and a supportive environment await. Why this role is great 3-shift rotation (no weekends), days during training 37 hours/week with overtime available £18.53/hr including shift allowance, plus bonus 26 days holiday + 7 statutory days Work for a well-established, respected employer in precision manufacturing What you ll do as NDT Technician Perform fluorescent penetrant (FPI), visual, dimensional, and CMM inspections on aerospace and industrial components Ensure strict adherence to procedures, drawings, and specifications Sign off batch cards and raise any conformance issues Conduct first-off inspections, receipt inspections, and airflow tests Maintain FPI Level 1/2 accreditation Achieve quality and performance targets in a fast-paced production environment What we re looking for FPI Level 1 or 2 qualification Proven NDT experience, ideally in aerospace Strong understanding of engineering drawings and inspection methods Experience with conventional inspection tools and CMM machines Able to work independently, accurately, and under pressure Please note: Applicants must have the Right to Work in the UK. Sponsorship is not available. Apply now for a chance to join a reputable, growing company with great pay, bonuses, and career prospects.
Apr 22, 2026
Full time
NDT Technician required in South Leicester for an Aerospace component manufacturer - Permanent 3-Shift Rotation £19.16/hr + Bonus & Overtime Immediate Start available. A growing aerospace and power generation components manufacturer is recruiting a skilled NDT Technician / Inspector to join their professional, fast-paced team. Excellent working conditions, clear career progression, and a supportive environment await. Why this role is great 3-shift rotation (no weekends), days during training 37 hours/week with overtime available £18.53/hr including shift allowance, plus bonus 26 days holiday + 7 statutory days Work for a well-established, respected employer in precision manufacturing What you ll do as NDT Technician Perform fluorescent penetrant (FPI), visual, dimensional, and CMM inspections on aerospace and industrial components Ensure strict adherence to procedures, drawings, and specifications Sign off batch cards and raise any conformance issues Conduct first-off inspections, receipt inspections, and airflow tests Maintain FPI Level 1/2 accreditation Achieve quality and performance targets in a fast-paced production environment What we re looking for FPI Level 1 or 2 qualification Proven NDT experience, ideally in aerospace Strong understanding of engineering drawings and inspection methods Experience with conventional inspection tools and CMM machines Able to work independently, accurately, and under pressure Please note: Applicants must have the Right to Work in the UK. Sponsorship is not available. Apply now for a chance to join a reputable, growing company with great pay, bonuses, and career prospects.
About the company We're partnered with a well-established aerospace and engineering services organisation supporting highly regulated, safety-critical environments. The business works closely with major OEMs and supply-chain partners, delivering high-quality inspection and testing services across manufacturing and in-service operations click apply for full job details
Apr 22, 2026
Full time
About the company We're partnered with a well-established aerospace and engineering services organisation supporting highly regulated, safety-critical environments. The business works closely with major OEMs and supply-chain partners, delivering high-quality inspection and testing services across manufacturing and in-service operations click apply for full job details
Recruit4staff are proud to be representing their client, a leading food manufacturing company in their search for a Production Technician to work in their leading facility in Telford. MUST BE HAPPY TO ATTEND PSYCHOMETRIC TESTING AT FIRST STAGE. For the successful Production Technician our client is offering; Starting salary of £33,733 which rises as experience/competence are signed off, if you can run all processes it can rise to £43,487 (For most this usually takes around 12 months but can be achieved sooner) 4 on 4 off, 12 hour shifts rotating days and nights, 07:25 - 19:35/19:35 - 07:25 Permanent role Benefits Health Cash Plan, tech schemes and many more. Holiday pay based on average hours worked, 5 weeks & 8 Bank Hols after 1st year. Health & Life assurance You will be part of a team working with technology that s always advancing, in a business that s constantly growing and pushing boundaries by liaising with development teams for improvements on standards. As a Production Technician your responsibilities will be: Stay hands-on with the machinery spotting potential faults, investigating issues and problem solving to prevent downtime. Ensure 100% compliance with Food Safety, Quality, and Health & Safety standards. Running the line to standard operating procedures, which include start- up and changeovers. Leading a line with machine operators, training and driving performance. Liaising with development teams for improvements on standards to drive continuous improvement, supporting refining processes to boost productivity. Taking ownership of the production line s performance, ensuring it runs efficiently and is complete control. What our client is looking for in a Production Technician: An individual with a strong technical mindset, who enjoys working with, setting and operating machinery- ESSENTIAL Technically competent to solve problems, taking action to ensure delivery, gaining support to ensure delivery Experience with changeovers/ basic machine maintenance- ESSENTIAL Someone excited by learning new techniques & technology, with a drive for continuous improvements and lean manufacturing. An effective communicator who listens and gives clear instructions, someone who isn t afraid of challenge, gaining support when from experts when needed. Ideally experienced within the food or processing industry although not essential Must be happy/available to attend a numerical and verbal reasoning test- ESSENTIAL Key skills or similar job titles; Production Technician, Process Operator, Process Technician, Quality Inspector, Quality Assurance, QA Technician, Quality Controller, Food Manufacturing, Food Packaging Commutable From; Telford/Shrewsbury/Wolverhampton/Bridgnorth/Cannock/Newport/Market Drayton/Whitchurch For further information about this and other positions please apply now This vacancy is being advertised on behalf of Recruit4staff (Wrexham) Limited who are operating as a recruitment agency, agent, agencies, employment agency or employment business. IndTel HJ
Oct 02, 2025
Full time
Recruit4staff are proud to be representing their client, a leading food manufacturing company in their search for a Production Technician to work in their leading facility in Telford. MUST BE HAPPY TO ATTEND PSYCHOMETRIC TESTING AT FIRST STAGE. For the successful Production Technician our client is offering; Starting salary of £33,733 which rises as experience/competence are signed off, if you can run all processes it can rise to £43,487 (For most this usually takes around 12 months but can be achieved sooner) 4 on 4 off, 12 hour shifts rotating days and nights, 07:25 - 19:35/19:35 - 07:25 Permanent role Benefits Health Cash Plan, tech schemes and many more. Holiday pay based on average hours worked, 5 weeks & 8 Bank Hols after 1st year. Health & Life assurance You will be part of a team working with technology that s always advancing, in a business that s constantly growing and pushing boundaries by liaising with development teams for improvements on standards. As a Production Technician your responsibilities will be: Stay hands-on with the machinery spotting potential faults, investigating issues and problem solving to prevent downtime. Ensure 100% compliance with Food Safety, Quality, and Health & Safety standards. Running the line to standard operating procedures, which include start- up and changeovers. Leading a line with machine operators, training and driving performance. Liaising with development teams for improvements on standards to drive continuous improvement, supporting refining processes to boost productivity. Taking ownership of the production line s performance, ensuring it runs efficiently and is complete control. What our client is looking for in a Production Technician: An individual with a strong technical mindset, who enjoys working with, setting and operating machinery- ESSENTIAL Technically competent to solve problems, taking action to ensure delivery, gaining support to ensure delivery Experience with changeovers/ basic machine maintenance- ESSENTIAL Someone excited by learning new techniques & technology, with a drive for continuous improvements and lean manufacturing. An effective communicator who listens and gives clear instructions, someone who isn t afraid of challenge, gaining support when from experts when needed. Ideally experienced within the food or processing industry although not essential Must be happy/available to attend a numerical and verbal reasoning test- ESSENTIAL Key skills or similar job titles; Production Technician, Process Operator, Process Technician, Quality Inspector, Quality Assurance, QA Technician, Quality Controller, Food Manufacturing, Food Packaging Commutable From; Telford/Shrewsbury/Wolverhampton/Bridgnorth/Cannock/Newport/Market Drayton/Whitchurch For further information about this and other positions please apply now This vacancy is being advertised on behalf of Recruit4staff (Wrexham) Limited who are operating as a recruitment agency, agent, agencies, employment agency or employment business. IndTel HJ
Quality Manager & Responsible Welding Coordinator Steelway 6- Month FTC Competitive - based on experience (pro-rata) Queensgate Works, Bilston Road, Wolverhampton, West Midlands, WV2 2NJ Steelway are a leading metal fabrication specialist, committed to delivering high-quality products and services to our customers. We are now looking for an experienced Quality Manager to take ownership of our Quality Management System and act as our Responsible Welding Coordinator (RWC). This is a hands-on role, where you will review, develop, and implement processes that ensure compliance, efficiency, and continual improvement across the business. Key Responsibilities: Quality Management System (QMS): Review, update, and improve the company s QMS in line with current business needs. Align processes where possible with group systems, highlighting any gaps. Create and implement processes, procedures, and supporting documentation. Develop and roll out training and guidance to staff. Establish an internal audit schedule, conduct audits, and recruit/train internal auditors. Overhaul the QMS filing system to be user-friendly and accessible. Introduce and embed a robust internal and external NCR system. Quality Inspection: Define and implement inspection requirements for the manufacturing process. Asist in identifying, recruiting and managing quality inspectors as needed. Track and report on KPIs to demonstrate inspection effectiveness. Ensure NDT testing is carried out in line with requirements, monitoring results and corrective actions. Operational Quality Support: Develop quality plans for customer orders and agree these with internal teams and clients. Oversee adherence to quality plans, holding stakeholders accountable. Arrange and host internal and third-party inspections, managing external auditors and assessors. Responsible Welding Coordinator: Ensure compliance with EN1090, maintaining all required welding procedures. Oversee WPS and related documentation. Provide training and guidance to welding staff to meet required standards. Liaise with the external Welding Coordinator to improve processes and strengthen compliance. About You: Strong knowledge of EN1090 and welding requirements. Proven experience implementing and managing QMS systems (ISO9001 minimum). Background in quality within a steel fabrication environment. Practical, hands-on approach not a consultancy role, but someone who takes ownership. Excellent IT skills and ability to create clear, structured documentation. Strong communicator, with the ability to influence and support at all levels. What We Offer: 33 days holiday including Bank Holidays and Christmas shutdown Competitive salary, dependent on experience Company pension scheme On-site parking Opportunities for training and development Bank Holidays off & Christmas shutdown If you are a quality professional with a strong background in steel fabrication and a practical approach to leadership, this is an excellent opportunity to make a real impact. Apply today and join Steelway as our new Quality Manager & Responsible Welding Coordinator.
Sep 22, 2025
Contractor
Quality Manager & Responsible Welding Coordinator Steelway 6- Month FTC Competitive - based on experience (pro-rata) Queensgate Works, Bilston Road, Wolverhampton, West Midlands, WV2 2NJ Steelway are a leading metal fabrication specialist, committed to delivering high-quality products and services to our customers. We are now looking for an experienced Quality Manager to take ownership of our Quality Management System and act as our Responsible Welding Coordinator (RWC). This is a hands-on role, where you will review, develop, and implement processes that ensure compliance, efficiency, and continual improvement across the business. Key Responsibilities: Quality Management System (QMS): Review, update, and improve the company s QMS in line with current business needs. Align processes where possible with group systems, highlighting any gaps. Create and implement processes, procedures, and supporting documentation. Develop and roll out training and guidance to staff. Establish an internal audit schedule, conduct audits, and recruit/train internal auditors. Overhaul the QMS filing system to be user-friendly and accessible. Introduce and embed a robust internal and external NCR system. Quality Inspection: Define and implement inspection requirements for the manufacturing process. Asist in identifying, recruiting and managing quality inspectors as needed. Track and report on KPIs to demonstrate inspection effectiveness. Ensure NDT testing is carried out in line with requirements, monitoring results and corrective actions. Operational Quality Support: Develop quality plans for customer orders and agree these with internal teams and clients. Oversee adherence to quality plans, holding stakeholders accountable. Arrange and host internal and third-party inspections, managing external auditors and assessors. Responsible Welding Coordinator: Ensure compliance with EN1090, maintaining all required welding procedures. Oversee WPS and related documentation. Provide training and guidance to welding staff to meet required standards. Liaise with the external Welding Coordinator to improve processes and strengthen compliance. About You: Strong knowledge of EN1090 and welding requirements. Proven experience implementing and managing QMS systems (ISO9001 minimum). Background in quality within a steel fabrication environment. Practical, hands-on approach not a consultancy role, but someone who takes ownership. Excellent IT skills and ability to create clear, structured documentation. Strong communicator, with the ability to influence and support at all levels. What We Offer: 33 days holiday including Bank Holidays and Christmas shutdown Competitive salary, dependent on experience Company pension scheme On-site parking Opportunities for training and development Bank Holidays off & Christmas shutdown If you are a quality professional with a strong background in steel fabrication and a practical approach to leadership, this is an excellent opportunity to make a real impact. Apply today and join Steelway as our new Quality Manager & Responsible Welding Coordinator.
