NG Bailey
Principal Electrical Design Engineer - Protection & Control Scotland Region Permanent - Full Time, hybrid Salary Competitive + Car Allowance + Flexible Benefits Summary: This role involves designing and overseeing the implementation of protection schemes, control systems, and related equipment to ensure the safe and reliable operation of power networks, substations, and Transmissions and Distribution electrical infrastructure. Position requires technical expertise and vast experience working in Transmission and Distribution sector for protection & control and Substation Automation system/SCADA design (from 11kV up to 400kV). Candidate should lead the design and specification of protection and control systems for electrical substations, powerplants, and transmission/distribution networks. Roles & Responsibilities: Candidate is responsible to develop protection settings, relay PSL files, coordination studies, including fault detection and isolation strategies. Candidates should have complete knowledge of all TSO/DNO standards & specifications with respect to P&C Design & Calculations, as well as overall Substation Design Works. He/She should ensure compliance with relevant national and international standards (e.g., IEC, BS, IEEE) in protection system design. Candidate should have good knowledge of substation primary design and substation equipment/switchgear specifications. He/She should ensure that the design meets safety standards and regulatory requirements, incorporating protection against electrical hazards, arc flash, and other safety concerns. Design, implement and maintain SCADA/communication systems for a variety of clients in sectors including utilities, oil and gas, manufacturing, industrial automation and various other communication networks. Configure and optimize network infrastructure & communication protocols such as IEC 61850; Distributed Network Protocol (DNP 3); Parallel Redundancy Protocol (PRP); Precision Time Protocol (PTP); Network Time Protocol (NTP); Simplified Network Time Protocol (NTP), Modbus, OPC, Profibus, etc for seamless integration with field devices, including RTUs, PLCs, IEDs, etc, also ensure stable connectivity between SCADA centres & remote sites, and configure secure VPNs & remote access protocols to allow for safe, off-site monitoring and control. Understand client requirements & produce network architecture philosophy diagram, IED telecommunication diagram, SCADA & Telecommunications Panel design, Network IP allocation, I/O Schedules, Cable & Core schedules, etc. Assist with the setup and commissioning of SCADA systems at client sites, troubleshoot field devices and network communication issues, perform preventive and corrective maintenance on SCADA infrastructure and associated hardware. Efficiently design/develop the SCADA/communication systems (e.g., Ignition, Siemens WinCC, GE iFIX, etc) to ensure real-time data acquisition and control for critical infrastructure. Provide remote support for troubleshooting SCADA system and network issues, ensuring minimal downtime and swift resolution of critical incidents. Conduct system upgrades, testing, and validation for new features, components, and patches. Implement cybersecurity measures to safeguard SCADA systems against emerging threats. Collaborate with cross-functional teams to ensure smooth integration and deployment of SCADA systems. Candidate should have experience in tendering, pricing jobs, proposal creation. Candidate should be actively participating in work winning process. Candidate should be capable of technically assessing engineering problems and critically evaluating a range of technical solutions. Unwavering confidence in technically assessing engineering problems and critically evaluating a range of technical solutions will be instrumental in pursuit of engineering excellence. Exemplary communication skills to demonstrate diligence, prioritize tasks effectively, and ensure a thorough understanding of relevant legislation, including CDM and ESQCR. This knowledge will be pivotal in managing Transmission and Distribution network. Collaborate closely with other designers, construction professionals, and engineering teams. Liaise effectively with the Power Systems, Primary and Civil design departments to ensure that all objectives are met and that the best possible design is submitted. Review and provide constructive feedback on the reports and drawings done by Junior & Senior Engineers. Provide technical leadership and mentoring to junior engineers in the design, analysis, and commissioning of protection systems. What we're looking for : Experience: Extensive experience in electrical protection and control system design, Substation Automation and SCADA system typically 12-15 years, with a proven track record of delivering complex projects within the power sector. Technical and Professional knowledge and experience associated with the role. Candidate should have vast experience in crafting Single Line Diagrams, AC & DC Schematic Drawings, Panel General Arrangements, Panel Wiring Diagrams, Switchgear Termination/interconnection drawings, Block Cable Diagrams/Schedules, and performing cable specification/sizing calculations, battery sizing calculations, CT/VT sizing, multicore sizing, Relays CORTEC/specifications. Candidate should have experience in testing & commissioning of P&C, SCADA/Communication/SAS panels. Should be able to Identify potential risks and failures within protection and SCADA systems and propose mitigation strategies. Candidate should have good knowledge & experience working with AutoCAD. Qualifications: Education: Bachelor's degree in electrical engineering (typically 2:1 or above) in Electrical Engineering, Power Systems, or a related field. A master's degree may be preferred for senior roles.Chartered Status (Preferred): Chartered Engineer (CEng) status with a professional body such as the Institution of Engineering and Technology (IET) or the Institution of Electrical Engineers (IEE) is highly desirable.Certifications (Optional): Professional certifications such as NEBOSH for health and safety, or specific training in protection and control system design, may be beneficial.Candidate should have experience working in Substation Automation Syste
Principal Electrical Design Engineer - Protection & Control Scotland Region Permanent - Full Time, hybrid Salary Competitive + Car Allowance + Flexible Benefits Summary: This role involves designing and overseeing the implementation of protection schemes, control systems, and related equipment to ensure the safe and reliable operation of power networks, substations, and Transmissions and Distribution electrical infrastructure. Position requires technical expertise and vast experience working in Transmission and Distribution sector for protection & control and Substation Automation system/SCADA design (from 11kV up to 400kV). Candidate should lead the design and specification of protection and control systems for electrical substations, powerplants, and transmission/distribution networks. Roles & Responsibilities: Candidate is responsible to develop protection settings, relay PSL files, coordination studies, including fault detection and isolation strategies. Candidates should have complete knowledge of all TSO/DNO standards & specifications with respect to P&C Design & Calculations, as well as overall Substation Design Works. He/She should ensure compliance with relevant national and international standards (e.g., IEC, BS, IEEE) in protection system design. Candidate should have good knowledge of substation primary design and substation equipment/switchgear specifications. He/She should ensure that the design meets safety standards and regulatory requirements, incorporating protection against electrical hazards, arc flash, and other safety concerns. Design, implement and maintain SCADA/communication systems for a variety of clients in sectors including utilities, oil and gas, manufacturing, industrial automation and various other communication networks. Configure and optimize network infrastructure & communication protocols such as IEC 61850; Distributed Network Protocol (DNP 3); Parallel Redundancy Protocol (PRP); Precision Time Protocol (PTP); Network Time Protocol (NTP); Simplified Network Time Protocol (NTP), Modbus, OPC, Profibus, etc for seamless integration with field devices, including RTUs, PLCs, IEDs, etc, also ensure stable connectivity between SCADA centres & remote sites, and configure secure VPNs & remote access protocols to allow for safe, off-site monitoring and control. Understand client requirements & produce network architecture philosophy diagram, IED telecommunication diagram, SCADA & Telecommunications Panel design, Network IP allocation, I/O Schedules, Cable & Core schedules, etc. Assist with the setup and commissioning of SCADA systems at client sites, troubleshoot field devices and network communication issues, perform preventive and corrective maintenance on SCADA infrastructure and associated hardware. Efficiently design/develop the SCADA/communication systems (e.g., Ignition, Siemens WinCC, GE iFIX, etc) to ensure real-time data acquisition and control for critical infrastructure. Provide remote support for troubleshooting SCADA system and network issues, ensuring minimal downtime and swift resolution of critical incidents. Conduct system upgrades, testing, and validation for new features, components, and patches. Implement cybersecurity measures to safeguard SCADA systems against emerging threats. Collaborate with cross-functional teams to ensure smooth integration and deployment of SCADA systems. Candidate should have experience in tendering, pricing jobs, proposal creation. Candidate should be actively participating in work winning process. Candidate should be capable of technically assessing engineering problems and critically evaluating a range of technical solutions. Unwavering confidence in technically assessing engineering problems and critically evaluating a range of technical solutions will be instrumental in pursuit of engineering excellence. Exemplary communication skills to demonstrate diligence, prioritize tasks effectively, and ensure a thorough understanding of relevant legislation, including CDM and ESQCR. This knowledge will be pivotal in managing Transmission and Distribution network. Collaborate closely with other designers, construction professionals, and engineering teams. Liaise effectively with the Power Systems, Primary and Civil design departments to ensure that all objectives are met and that the best possible design is submitted. Review and provide constructive feedback on the reports and drawings done by Junior & Senior Engineers. Provide technical leadership and mentoring to junior engineers in the design, analysis, and commissioning of protection systems. What we're looking for : Experience: Extensive experience in electrical protection and control system design, Substation Automation and SCADA system typically 12-15 years, with a proven track record of delivering complex projects within the power sector. Technical and Professional knowledge and experience associated with the role. Candidate should have vast experience in crafting Single Line Diagrams, AC & DC Schematic Drawings, Panel General Arrangements, Panel Wiring Diagrams, Switchgear Termination/interconnection drawings, Block Cable Diagrams/Schedules, and performing cable specification/sizing calculations, battery sizing calculations, CT/VT sizing, multicore sizing, Relays CORTEC/specifications. Candidate should have experience in testing & commissioning of P&C, SCADA/Communication/SAS panels. Should be able to Identify potential risks and failures within protection and SCADA systems and propose mitigation strategies. Candidate should have good knowledge & experience working with AutoCAD. Qualifications: Education: Bachelor's degree in electrical engineering (typically 2:1 or above) in Electrical Engineering, Power Systems, or a related field. A master's degree may be preferred for senior roles.Chartered Status (Preferred): Chartered Engineer (CEng) status with a professional body such as the Institution of Engineering and Technology (IET) or the Institution of Electrical Engineers (IEE) is highly desirable.Certifications (Optional): Professional certifications such as NEBOSH for health and safety, or specific training in protection and control system design, may be beneficial.Candidate should have experience working in Substation Automation Syste
Hays Construction and Property
City, Manchester
Your new company You will be working for a social housing organisation in Manchester Your new role As a Building Surveyor you join the Complex Repairs & Maintenance team on a permanent basis. The successful candidate will be based at the Manchester office, with travel required across the region. The purpose of this role is to assess and deliver bespoke projects providing technical advice, support and property evaluation on the condition and delivery / investment requirements of the property portfolio within the Group. This is a fast-paced role, with reactive assessments and action necessary. Stock Sustainability Effectively contribute towards stock sustainability, option appraisal of stock and delivery options, including any associated regeneration initiatives. Project Management Taking account of long-term maintenance needs, develop and project manage bespoke investment/refurbishment projects through appraisal in conjunction with other directorates across the business providing commercial solutions to address poor performing assets. Surveys and Project Appraisal Undertake high quality dilapidation/diagnostic building surveys across the Group providing detailed project appraisals and technical advice and support on property condition and investment requirements. Validate identified investment requirements and ensure investment is in line with the Asset Management Strategy. Investment Planning Support the investment programme assessing compatibility with the neighbourhood plan, in line with the organisation's and Regulatory standards, including the development of comprehensive detailed specifications that will ensure effective delivery whilst working in collaboration with Landlord Compliance, Capital Delivery and Repairs and Maintenance Teams considering whole life maintenance, and innovative solutions where applicable. Health and Safety Be responsible for health and safety and compliance with legislative requirements including CDM for all Major Works Projects activities across the Group and support the wider directorate in knowledge and expertise. What you'll need to succeed Skills & ExperienceEssential Demonstrable knowledge of building construction, building standards, planning regulations, regulatory standards, and leasehold legislation (including Awaab's Law). Commercial understanding and experience of value for money drivers in construction with delivery of bespoke investment programmes. Detailed knowledge of construction specifications, contracts and their effective management. Knowledge of project financial valuation and evaluation, performance assessment and budget management. Experience of performing the role of 'principal designer' and knowledge of the requirements of CDM. Self-motivated, organised and ability to work autonomously Experience managing relationships with internal and external stakeholders. A Full UK Driving Licence and access to your own car. Desirable Previous experience of managing similar projects. IT skills - Microsoft office and Auto CAD com. Qualifications Essential Building related Degree or equivalent qualification/ building related specialism. What you'll get in return Salary 47,500 per annum 32 days annual leave plus bank holidays Opportunity to further increase annual leave with service or through the holiday purchase scheme. Immediate entry to our Pension scheme (matched contributions up to 10%). A great flexible working environment, with a range of family friendly policies. Simply Health cash plan with financial benefits and the option to extend to your family. Cover includes dental, optical, physiotherapy, 24HR private GP access and much more. Paid leave for absence including sickness, maternity, paternity, and adoption leave. Access of up to 150 annually through the 'Learning for life' scheme. Access to a wide range of discounts and cash back offers, ranging from retail and automotive to holidays and cycle to work scheme. Develop your career with support and access to training and qualifications. What you need to do now If you're interested in this role, click 'apply now' to forward an up-to-date copy of your CV, or call us now. If this job isn't quite right for you, but you are looking for a new position, please contact us for a confidential discussion about your career. Hays Specialist Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job you accept the T&C's, Privacy Policy and Disclaimers which can be found at (url removed)
Your new company You will be working for a social housing organisation in Manchester Your new role As a Building Surveyor you join the Complex Repairs & Maintenance team on a permanent basis. The successful candidate will be based at the Manchester office, with travel required across the region. The purpose of this role is to assess and deliver bespoke projects providing technical advice, support and property evaluation on the condition and delivery / investment requirements of the property portfolio within the Group. This is a fast-paced role, with reactive assessments and action necessary. Stock Sustainability Effectively contribute towards stock sustainability, option appraisal of stock and delivery options, including any associated regeneration initiatives. Project Management Taking account of long-term maintenance needs, develop and project manage bespoke investment/refurbishment projects through appraisal in conjunction with other directorates across the business providing commercial solutions to address poor performing assets. Surveys and Project Appraisal Undertake high quality dilapidation/diagnostic building surveys across the Group providing detailed project appraisals and technical advice and support on property condition and investment requirements. Validate identified investment requirements and ensure investment is in line with the Asset Management Strategy. Investment Planning Support the investment programme assessing compatibility with the neighbourhood plan, in line with the organisation's and Regulatory standards, including the development of comprehensive detailed specifications that will ensure effective delivery whilst working in collaboration with Landlord Compliance, Capital Delivery and Repairs and Maintenance Teams considering whole life maintenance, and innovative solutions where applicable. Health and Safety Be responsible for health and safety and compliance with legislative requirements including CDM for all Major Works Projects activities across the Group and support the wider directorate in knowledge and expertise. What you'll need to succeed Skills & ExperienceEssential Demonstrable knowledge of building construction, building standards, planning regulations, regulatory standards, and leasehold legislation (including Awaab's Law). Commercial understanding and experience of value for money drivers in construction with delivery of bespoke investment programmes. Detailed knowledge of construction specifications, contracts and their effective management. Knowledge of project financial valuation and evaluation, performance assessment and budget management. Experience of performing the role of 'principal designer' and knowledge of the requirements of CDM. Self-motivated, organised and ability to work autonomously Experience managing relationships with internal and external stakeholders. A Full UK Driving Licence and access to your own car. Desirable Previous experience of managing similar projects. IT skills - Microsoft office and Auto CAD com. Qualifications Essential Building related Degree or equivalent qualification/ building related specialism. What you'll get in return Salary 47,500 per annum 32 days annual leave plus bank holidays Opportunity to further increase annual leave with service or through the holiday purchase scheme. Immediate entry to our Pension scheme (matched contributions up to 10%). A great flexible working environment, with a range of family friendly policies. Simply Health cash plan with financial benefits and the option to extend to your family. Cover includes dental, optical, physiotherapy, 24HR private GP access and much more. Paid leave for absence including sickness, maternity, paternity, and adoption leave. Access of up to 150 annually through the 'Learning for life' scheme. Access to a wide range of discounts and cash back offers, ranging from retail and automotive to holidays and cycle to work scheme. Develop your career with support and access to training and qualifications. What you need to do now If you're interested in this role, click 'apply now' to forward an up-to-date copy of your CV, or call us now. If this job isn't quite right for you, but you are looking for a new position, please contact us for a confidential discussion about your career. Hays Specialist Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job you accept the T&C's, Privacy Policy and Disclaimers which can be found at (url removed)
