Compliance Manager Competitive Salary Monday - Friday / General Office Hours Caernarfon Our client based in the Caernarfon area are currently recruiting a Compliance Manager on a permanent basis. Reporting to the Head of Technical you will ensure the ongoing BRC and customer accreditation, food safety, legal and ethical, integrity and compliance of the company. Performance Objectives Maintaining BRC, customer and local authority approval and customer codes of practice. Responsible for Food Safety and Legality site wide. Maintain the company audit schedule, root cause analysis, and corrective actions in collaboration with the operations team - ensure non-conformances are raised, followed through and closed off. Liaison with the external and internal customers Supporting the QA manager with QA employees, across the shifts to complete the required workload and drive forward departmental policies and procedures. Manage, mentor and support Technical Compliance Auditor to ensure continuous learning and workload. Ensuring a culture of continuous improvement and challenging current practice To manage and monitor standards throughout the site and to ensure that the business is compliant with our and customer codes of practice Supporting HR department with implementing and managing SEDEX/SMETA requirements. Implementing new procedures and standards within the factory to make sure the site is complying with legislation and customer codes of practice Complete risk assessments where necessary to ensure compliance with legislation and customer codes of practice Record, investigate logging and responding. Working with all teams across the site to ensure the quality requirements are understood and practised by all. To champion hygiene across all aspects of the factory and drive the development of food safety culture, prompting awareness of the importance of hygiene & good manufacturing practice Maintain and develop the Q pulse system Manage the requirements of export documents ensuring that documentation is correct and complete for each load despatched. Quality and Food Safety training across the site in conjunction with HR and external training contractors. Coordinate and deliver accredited food safety training. Accident reporting - Ensure that all accidents /near miss forms are completed properly and that accident analysis forms are completed (appropriate evidence needs to be gathered at the time of the incident. Ensure that all appropriate and relevant H&S practices are being followed by team members, i.e. wearing of appropriate PPE. Person Specification Ability to work under pressure and to deadlines. Ability to manage own workload without supervision. Good personal planning skills. Strong verbal, numeracy and written communication skills. Assertiveness, delegation and analytical skills. Ability to work with cross-functional teams at all levels. Decision maker. Educated to degree level and experience of working in a Quality management role, with a food manufacturing, HACCP, COSHH, Health and Safety qualified. Able to deliver Food Safety and related training - a training qualification preferable. Experience of working with multiple retailers and aware of their standards and codes of practice. Benefits Holidays - 25 days plus Bank Holidays. 5% pension contribution. Full sickness payment based on qualifying criteria. gap personnel group is committed to the selection, recruitment and development of the best people, basing judgments solely on suitability for the job. By applying for the above position and providing your personal data to us you understand that your data will be processed in line with our Privacy Policy. Whilst we endeavour to respond to all applications individually, due to high volumes, this is not always possible. Thank you for your interest in this role and we look forward to working with you in the future.
May 17, 2026
Full time
Compliance Manager Competitive Salary Monday - Friday / General Office Hours Caernarfon Our client based in the Caernarfon area are currently recruiting a Compliance Manager on a permanent basis. Reporting to the Head of Technical you will ensure the ongoing BRC and customer accreditation, food safety, legal and ethical, integrity and compliance of the company. Performance Objectives Maintaining BRC, customer and local authority approval and customer codes of practice. Responsible for Food Safety and Legality site wide. Maintain the company audit schedule, root cause analysis, and corrective actions in collaboration with the operations team - ensure non-conformances are raised, followed through and closed off. Liaison with the external and internal customers Supporting the QA manager with QA employees, across the shifts to complete the required workload and drive forward departmental policies and procedures. Manage, mentor and support Technical Compliance Auditor to ensure continuous learning and workload. Ensuring a culture of continuous improvement and challenging current practice To manage and monitor standards throughout the site and to ensure that the business is compliant with our and customer codes of practice Supporting HR department with implementing and managing SEDEX/SMETA requirements. Implementing new procedures and standards within the factory to make sure the site is complying with legislation and customer codes of practice Complete risk assessments where necessary to ensure compliance with legislation and customer codes of practice Record, investigate logging and responding. Working with all teams across the site to ensure the quality requirements are understood and practised by all. To champion hygiene across all aspects of the factory and drive the development of food safety culture, prompting awareness of the importance of hygiene & good manufacturing practice Maintain and develop the Q pulse system Manage the requirements of export documents ensuring that documentation is correct and complete for each load despatched. Quality and Food Safety training across the site in conjunction with HR and external training contractors. Coordinate and deliver accredited food safety training. Accident reporting - Ensure that all accidents /near miss forms are completed properly and that accident analysis forms are completed (appropriate evidence needs to be gathered at the time of the incident. Ensure that all appropriate and relevant H&S practices are being followed by team members, i.e. wearing of appropriate PPE. Person Specification Ability to work under pressure and to deadlines. Ability to manage own workload without supervision. Good personal planning skills. Strong verbal, numeracy and written communication skills. Assertiveness, delegation and analytical skills. Ability to work with cross-functional teams at all levels. Decision maker. Educated to degree level and experience of working in a Quality management role, with a food manufacturing, HACCP, COSHH, Health and Safety qualified. Able to deliver Food Safety and related training - a training qualification preferable. Experience of working with multiple retailers and aware of their standards and codes of practice. Benefits Holidays - 25 days plus Bank Holidays. 5% pension contribution. Full sickness payment based on qualifying criteria. gap personnel group is committed to the selection, recruitment and development of the best people, basing judgments solely on suitability for the job. By applying for the above position and providing your personal data to us you understand that your data will be processed in line with our Privacy Policy. Whilst we endeavour to respond to all applications individually, due to high volumes, this is not always possible. Thank you for your interest in this role and we look forward to working with you in the future.
Quality Auditor Salary: Competitive salary Benefits: Company share save scheme, Competitive matched pension contributions , Life insurance up to 4x salary Location: Holbeach Ways of Working: 3s & 2s (Blue Days) Hours of work: 06:00am-18:00pm Contract Type: Permanent Why Greencore? Following the combination with Bakkavor in January 2026, we're one of the UK's leading creators of convenience food, driven by a simple purpose: to make every day taste better. As a vibrant and fast-moving business, we're proud to employ over 28,000 talented colleagues across 36 manufacturing sites and 21 distribution depots in the UK and the US. Together, we bring delicious food to life. Our products cover every meal occasion from breakfast through to dinner and dessert, with lunch and snacking in between. In FY25, our shared passion helped us achieve combined revenues of approximately £4bn. Our extensive direct to store (DTS) network, with 17 depots across the UK, allows us to deliver fresh and frozen food, both our own and from trusted partners, to thousands of stores every day, ensuring consumers enjoy the very best, whenever and wherever they shop. Our site in Holbeach St Marks, Lincolnshire, specialises in producing chilled pizzas and employs around 880 people, operating in a fast-paced, high-volume environment. What you'll be doing In this busy and hands-on role as a Quality Auditor, you'll audit, monitor, and continuously improve quality systems and procedures across site operations. Working closely with operational teams, you'll provide practical technical support while maintaining and promoting quality and food safety standards in line with Greencore, customer, and legal requirements, with guidance from the QA Supervisor or Manager. Role Accountabilities • Audit compliance with QMS, GMP, and HACCP, raising clear non-conformances and driving corrective actions to closure • Apply an inquisitive audit mindset to identify root causes and reduce repeat non-conformances • Conduct traceability audits, efficiently retrieving data and presenting findings clearly • Complete sampling activities to schedule, including microbiological, nutritional, swabs, and organoleptic testing • Prepare, facilitate, and trend taste panels, escalating out-of-specification results and recommending improvements • Calibrate factory measurement equipment to schedule and manage out-of-tolerance actions • Support investigations into complaints, incidents, and out-of-specification results through audits and data analysis • Support NPD trials and product launches, including testing, shelf-life assessment, and taste panels • Provide day-to-day technical support to factory teams, audits, and customer visits • Contribute to Technical KPI delivery through audits, investigations, and proactive improvement actions • Work safely at all times, promoting strong health, safety, and environmental standards What we're looking for • A strong understanding of quality systems, GMP, HACCP, and traceability within a manufacturing environment • A proactive, detail-focused approach with a natural curiosity to challenge and improve standards • Confidence working hands-on on the factory floor, providing clear and practical technical guidance • Ability to audit effectively, identify root causes, and drive corrective and preventative actions • Strong communication skills, able to engage confidently with colleagues at all levels • A collaborative mindset, working effectively within cross-functional teams • Good organisational skills, with the ability to manage multiple priorities to deadlines • Commitment to continuous improvement and personal development • A positive, resilient approach aligned to Greencore values We're not all the same at Greencore and our differences help us to make every day taste better for all our stakeholders. We truly put our people at the core and are proud of our diversity. If this sounds like you, join us and grow with Greencore, and be a part of driving our future success. What you'll get in return • Competitive salary and job-related benefits • Holidays • Competitive matched pension • Life insurance up to 4x salary • Company share save scheme • Greencore Qualifications • Exclusive Greencore employee discount platform • Access to a full Wellbeing Centre platform • Enhanced parental leave and menopause policies Throughout your time at Greencore, you will be supported with on-the-job training and development opportunities to further your career.
May 17, 2026
Full time
Quality Auditor Salary: Competitive salary Benefits: Company share save scheme, Competitive matched pension contributions , Life insurance up to 4x salary Location: Holbeach Ways of Working: 3s & 2s (Blue Days) Hours of work: 06:00am-18:00pm Contract Type: Permanent Why Greencore? Following the combination with Bakkavor in January 2026, we're one of the UK's leading creators of convenience food, driven by a simple purpose: to make every day taste better. As a vibrant and fast-moving business, we're proud to employ over 28,000 talented colleagues across 36 manufacturing sites and 21 distribution depots in the UK and the US. Together, we bring delicious food to life. Our products cover every meal occasion from breakfast through to dinner and dessert, with lunch and snacking in between. In FY25, our shared passion helped us achieve combined revenues of approximately £4bn. Our extensive direct to store (DTS) network, with 17 depots across the UK, allows us to deliver fresh and frozen food, both our own and from trusted partners, to thousands of stores every day, ensuring consumers enjoy the very best, whenever and wherever they shop. Our site in Holbeach St Marks, Lincolnshire, specialises in producing chilled pizzas and employs around 880 people, operating in a fast-paced, high-volume environment. What you'll be doing In this busy and hands-on role as a Quality Auditor, you'll audit, monitor, and continuously improve quality systems and procedures across site operations. Working closely with operational teams, you'll provide practical technical support while maintaining and promoting quality and food safety standards in line with Greencore, customer, and legal requirements, with guidance from the QA Supervisor or Manager. Role Accountabilities • Audit compliance with QMS, GMP, and HACCP, raising clear non-conformances and driving corrective actions to closure • Apply an inquisitive audit mindset to identify root causes and reduce repeat non-conformances • Conduct traceability audits, efficiently retrieving data and presenting findings clearly • Complete sampling activities to schedule, including microbiological, nutritional, swabs, and organoleptic testing • Prepare, facilitate, and trend taste panels, escalating out-of-specification results and recommending improvements • Calibrate factory measurement equipment to schedule and manage out-of-tolerance actions • Support investigations into complaints, incidents, and out-of-specification results through audits and data analysis • Support NPD trials and product launches, including testing, shelf-life assessment, and taste panels • Provide day-to-day technical support to factory teams, audits, and customer visits • Contribute to Technical KPI delivery through audits, investigations, and proactive improvement actions • Work safely at all times, promoting strong health, safety, and environmental standards What we're looking for • A strong understanding of quality systems, GMP, HACCP, and traceability within a manufacturing environment • A proactive, detail-focused approach with a natural curiosity to challenge and improve standards • Confidence working hands-on on the factory floor, providing clear and practical technical guidance • Ability to audit effectively, identify root causes, and drive corrective and preventative actions • Strong communication skills, able to engage confidently with colleagues at all levels • A collaborative mindset, working effectively within cross-functional teams • Good organisational skills, with the ability to manage multiple priorities to deadlines • Commitment to continuous improvement and personal development • A positive, resilient approach aligned to Greencore values We're not all the same at Greencore and our differences help us to make every day taste better for all our stakeholders. We truly put our people at the core and are proud of our diversity. If this sounds like you, join us and grow with Greencore, and be a part of driving our future success. What you'll get in return • Competitive salary and job-related benefits • Holidays • Competitive matched pension • Life insurance up to 4x salary • Company share save scheme • Greencore Qualifications • Exclusive Greencore employee discount platform • Access to a full Wellbeing Centre platform • Enhanced parental leave and menopause policies Throughout your time at Greencore, you will be supported with on-the-job training and development opportunities to further your career.
Production Supervisor Location: Hungerford Salary: £33,500 per annum Hours: 14:00-22:00, Monday to Friday Reporting To Cereal Plant Production Manager Role Overview The Production Supervisor is responsible for overseeing the day-to-day operation of the cereal production plant, ensuring efficient, safe, and high-quality production. This includes leading and supervising the production team, operating and monitoring key equipment, and maintaining full compliance with food safety, quality, and legal standards. The role requires a hands-on approach and a strong focus on continuous improvement. Key Responsibilities Organise and coordinate the daily activities of cereal plant operators. Lead and supervise all aspects of cereal plant production, ensuring smooth operation of production equipment including, but not limited to, extruders and syrup coating systems. Prepare production mixes using various equipment, including checking, weighing, and mixing dry and wet ingredients. Operate and monitor production machinery such as extruders, conditioners, flaking mills, toasters, and associated equipment. Carry out in-process quality checks, including bulk density and Brix measurements. Manage raw material usage and stock control in line with FIFO principles. Conduct final product inspections to ensure specification and quality standards are met. Complete all production, quality, and technical documentation accurately, ensuring full traceability. Ensure all department workspaces are maintained to a high standard of cleanliness and hygiene, in compliance with BRC and food safety requirements. Maintain accurate records and complete all documentation relevant to the role. Provide cover for the Production Manager when required. Support a safe working environment through compliance with relevant UK legislation, health and safety standards, and company procedures. Undertake additional duties as required to support operational needs. Person Specification Essential Sound general education. Experience managing or supervising a team. Strong communication skills with the ability to lead and motivate others. A collaborative, team-focused approach. Adaptable and flexible, with strong problem-solving skills. Knowledge of MRP systems. Awareness of health and safety requirements within a manufacturing environment. Desirable HACCP training. Health and Safety certification. Experience working with extrusion systems. Forklift truck qualification. First Aid certification.
May 17, 2026
Full time
Production Supervisor Location: Hungerford Salary: £33,500 per annum Hours: 14:00-22:00, Monday to Friday Reporting To Cereal Plant Production Manager Role Overview The Production Supervisor is responsible for overseeing the day-to-day operation of the cereal production plant, ensuring efficient, safe, and high-quality production. This includes leading and supervising the production team, operating and monitoring key equipment, and maintaining full compliance with food safety, quality, and legal standards. The role requires a hands-on approach and a strong focus on continuous improvement. Key Responsibilities Organise and coordinate the daily activities of cereal plant operators. Lead and supervise all aspects of cereal plant production, ensuring smooth operation of production equipment including, but not limited to, extruders and syrup coating systems. Prepare production mixes using various equipment, including checking, weighing, and mixing dry and wet ingredients. Operate and monitor production machinery such as extruders, conditioners, flaking mills, toasters, and associated equipment. Carry out in-process quality checks, including bulk density and Brix measurements. Manage raw material usage and stock control in line with FIFO principles. Conduct final product inspections to ensure specification and quality standards are met. Complete all production, quality, and technical documentation accurately, ensuring full traceability. Ensure all department workspaces are maintained to a high standard of cleanliness and hygiene, in compliance with BRC and food safety requirements. Maintain accurate records and complete all documentation relevant to the role. Provide cover for the Production Manager when required. Support a safe working environment through compliance with relevant UK legislation, health and safety standards, and company procedures. Undertake additional duties as required to support operational needs. Person Specification Essential Sound general education. Experience managing or supervising a team. Strong communication skills with the ability to lead and motivate others. A collaborative, team-focused approach. Adaptable and flexible, with strong problem-solving skills. Knowledge of MRP systems. Awareness of health and safety requirements within a manufacturing environment. Desirable HACCP training. Health and Safety certification. Experience working with extrusion systems. Forklift truck qualification. First Aid certification.
Birmingham, United Kingdom Posted on 19/04/2026 About the Company TCS Consulting is recruiting on behalf of a growing automation business that works with leading manufacturers across automotive, aerospace, and food & beverage. They deliver full automation and digital transformation projects and are known for taking ownership from concept through to commissioning. Due to continued growth, they are now looking to bring in an Electrical Project Engineer to strengthen their delivery team. The Role This is a hands-on, project-focused role where you will take ownership of the electrical delivery across automation projects . You will work closely with the Project Manager and be responsible for everything from panel build and installation through to commissioning and start of production . This role will suit someone who is comfortable being both hands-on and commercially aware , with the ability to manage projects while still getting involved technically when needed. Key Responsibilities Take ownership of electrical projects from sales handover through to completion Plan and coordinate all electrical activities in line with project timelines Manage on-site installation teams and ensure safe delivery of work Oversee panel build activities within the workshop Manage electrical materials and ensure availability across workshop and site Select and source installation materials (cabling, containment, etc.) Support installation teams on-site and ensure quality standards are met Carry out commissioning of control panels, I/O and drives Support with hands-on installation and panel build where required Work closely with Project Managers to track progress and mitigate risks Act as a key point of contact for customers throughout delivery Produce RAMS (Risk Assessments and Method Statements) Support with project costing and estimates where required What We're Looking For Minimum 3-5 years' experience within electrical engineering / automation projects Strong background in electrical installation, panel build and commissioning Experience working on industrial automation or manufacturing projects Ability to manage projects while remaining hands-on Comfortable working on-site and leading installation teams Strong communication skills with both internal teams and customers Qualifications NVQ Level 3 in Electrical Installation (or equivalent) Completed electrical apprenticeship 18th Edition Wiring Regulations (BS 7671) 2391 Inspection & Testing (preferred) Additional Information Hybrid working (Birmingham base) Around 25% travel to customer sites Overtime available (including weekends where required)
May 17, 2026
Full time
Birmingham, United Kingdom Posted on 19/04/2026 About the Company TCS Consulting is recruiting on behalf of a growing automation business that works with leading manufacturers across automotive, aerospace, and food & beverage. They deliver full automation and digital transformation projects and are known for taking ownership from concept through to commissioning. Due to continued growth, they are now looking to bring in an Electrical Project Engineer to strengthen their delivery team. The Role This is a hands-on, project-focused role where you will take ownership of the electrical delivery across automation projects . You will work closely with the Project Manager and be responsible for everything from panel build and installation through to commissioning and start of production . This role will suit someone who is comfortable being both hands-on and commercially aware , with the ability to manage projects while still getting involved technically when needed. Key Responsibilities Take ownership of electrical projects from sales handover through to completion Plan and coordinate all electrical activities in line with project timelines Manage on-site installation teams and ensure safe delivery of work Oversee panel build activities within the workshop Manage electrical materials and ensure availability across workshop and site Select and source installation materials (cabling, containment, etc.) Support installation teams on-site and ensure quality standards are met Carry out commissioning of control panels, I/O and drives Support with hands-on installation and panel build where required Work closely with Project Managers to track progress and mitigate risks Act as a key point of contact for customers throughout delivery Produce RAMS (Risk Assessments and Method Statements) Support with project costing and estimates where required What We're Looking For Minimum 3-5 years' experience within electrical engineering / automation projects Strong background in electrical installation, panel build and commissioning Experience working on industrial automation or manufacturing projects Ability to manage projects while remaining hands-on Comfortable working on-site and leading installation teams Strong communication skills with both internal teams and customers Qualifications NVQ Level 3 in Electrical Installation (or equivalent) Completed electrical apprenticeship 18th Edition Wiring Regulations (BS 7671) 2391 Inspection & Testing (preferred) Additional Information Hybrid working (Birmingham base) Around 25% travel to customer sites Overtime available (including weekends where required)
Technical Manager Salary: Competitive salary Benefits: Company share save scheme, Competitive matched pension contributions, Life insurance up to 4x salary Location: Sutton Bridge Ways of Working: Site Based Hours of work: Monday - Friday, 08.30 -17.00 Contract Type: Permanent Why Greencore? Following the combination with Bakkavor in January 2026, we're one of the UK's leading creators of convenience food, driven by a simple purpose: to make every day taste better. As a vibrant and fast-moving business, we're proud to employ over 28,000 talented colleagues across 36 manufacturing sites and 21 distribution depots in the UK and the US. Together, we bring delicious food to life. Our products cover every meal occasion from breakfast through to dinner and dessert, with lunch and snacking in between. In FY25, our shared passion helped us achieve combined revenues of approximately £4bn. Our extensive direct to store (DTS) network, with 17 depots across the UK, allows us to deliver fresh and frozen food both our own and from trusted partners to thousands of stores every day, ensuring consumers enjoy the very best, whenever and wherever they shop. Our site in Sutton Bridge is home to around 225 colleagues, producing chilled Indian ready meals for a dedicated customer. What you'll be doing In this integral role as Technical Manager, you will ensure robust controls are in place to consistently deliver food safety, quality, legality and customer technical requirements. You will take a proactive approach to preventing food safety issues, while ensuring effective systems and controls are in place to manage incidents or crises should they arise. You will lead and motivate the technical team across all aspects of the function, setting the technical agenda for the business unit in line with the site strategy. A key part of the role is defining and embedding a strong quality culture across customer service, raw material management and factory standards, driving continuous improvement and operational excellence throughout the site. Role Accountabilities: Ensure food safety, quality, legality and customer standards are clearly defined, implemented, communicated and monitored across the site Lead, maintain and continuously improve HACCP and quality management systems, including risk assessments for new products, processes and raw materials Drive and host technical audits, manage non-conformances and use KPIs, complaints and microbiological data to identify trends and deliver continuous improvement Own technical communication with customers, suppliers and internal stakeholders, defining and delivering the customer technical agenda Lead, motivate and develop the technical team through training, PDPs and succession planning, embedding a culture aligned to Greencore values Support NPD and process development, ensuring technical standards are met from concept through to launch Manage the technical budget, support profit improvement initiatives and champion a strong food safety, quality and health & safety culture across the site What we're looking for Strong technical leadership capability within a chilled food manufacturing environment In-depth knowledge of food safety, quality, legality and customer technical standards Proven ability to lead HACCP, quality management systems and technical audits Confidence managing customer and supplier technical relationships Ability to analyse data, identify trends and drive continuous improvement Strong people leadership skills with a focus on coaching, development and succession planning Commercial awareness and the ability to align technical priorities with site and business objectives Excellent communication and influencing skills across all levels We're not all the same at Greencore and our differences help us to make every day taste better for all our stakeholders. We truly put our people at the core and are proud of our diversity. If this sounds like you, join us and grow with Greencore, and be a part of driving our future success. What you'll get in return Competitive salary and job-related benefits Holidays Competitive matched pension contributions Life insurance up to 4x salary Company share save scheme Greencore Qualifications Exclusive Greencore employee discount platform Access to a full Wellbeing Centre platform Enhanced parental leave and menopause policies Throughout your time at Greencore, you will be supported with on-the-job training and development opportunities to further your career.
May 17, 2026
Full time
Technical Manager Salary: Competitive salary Benefits: Company share save scheme, Competitive matched pension contributions, Life insurance up to 4x salary Location: Sutton Bridge Ways of Working: Site Based Hours of work: Monday - Friday, 08.30 -17.00 Contract Type: Permanent Why Greencore? Following the combination with Bakkavor in January 2026, we're one of the UK's leading creators of convenience food, driven by a simple purpose: to make every day taste better. As a vibrant and fast-moving business, we're proud to employ over 28,000 talented colleagues across 36 manufacturing sites and 21 distribution depots in the UK and the US. Together, we bring delicious food to life. Our products cover every meal occasion from breakfast through to dinner and dessert, with lunch and snacking in between. In FY25, our shared passion helped us achieve combined revenues of approximately £4bn. Our extensive direct to store (DTS) network, with 17 depots across the UK, allows us to deliver fresh and frozen food both our own and from trusted partners to thousands of stores every day, ensuring consumers enjoy the very best, whenever and wherever they shop. Our site in Sutton Bridge is home to around 225 colleagues, producing chilled Indian ready meals for a dedicated customer. What you'll be doing In this integral role as Technical Manager, you will ensure robust controls are in place to consistently deliver food safety, quality, legality and customer technical requirements. You will take a proactive approach to preventing food safety issues, while ensuring effective systems and controls are in place to manage incidents or crises should they arise. You will lead and motivate the technical team across all aspects of the function, setting the technical agenda for the business unit in line with the site strategy. A key part of the role is defining and embedding a strong quality culture across customer service, raw material management and factory standards, driving continuous improvement and operational excellence throughout the site. Role Accountabilities: Ensure food safety, quality, legality and customer standards are clearly defined, implemented, communicated and monitored across the site Lead, maintain and continuously improve HACCP and quality management systems, including risk assessments for new products, processes and raw materials Drive and host technical audits, manage non-conformances and use KPIs, complaints and microbiological data to identify trends and deliver continuous improvement Own technical communication with customers, suppliers and internal stakeholders, defining and delivering the customer technical agenda Lead, motivate and develop the technical team through training, PDPs and succession planning, embedding a culture aligned to Greencore values Support NPD and process development, ensuring technical standards are met from concept through to launch Manage the technical budget, support profit improvement initiatives and champion a strong food safety, quality and health & safety culture across the site What we're looking for Strong technical leadership capability within a chilled food manufacturing environment In-depth knowledge of food safety, quality, legality and customer technical standards Proven ability to lead HACCP, quality management systems and technical audits Confidence managing customer and supplier technical relationships Ability to analyse data, identify trends and drive continuous improvement Strong people leadership skills with a focus on coaching, development and succession planning Commercial awareness and the ability to align technical priorities with site and business objectives Excellent communication and influencing skills across all levels We're not all the same at Greencore and our differences help us to make every day taste better for all our stakeholders. We truly put our people at the core and are proud of our diversity. If this sounds like you, join us and grow with Greencore, and be a part of driving our future success. What you'll get in return Competitive salary and job-related benefits Holidays Competitive matched pension contributions Life insurance up to 4x salary Company share save scheme Greencore Qualifications Exclusive Greencore employee discount platform Access to a full Wellbeing Centre platform Enhanced parental leave and menopause policies Throughout your time at Greencore, you will be supported with on-the-job training and development opportunities to further your career.
Quality Auditor Salary: Competitive salary Benefits: Company share save scheme, Competitive matched pension up contributions, Life insurance up to 4x salary Location: Old Leake (PE22 9PN) Near Boston Ways of Working: Site Based Hours of work: 3's & 2's - 06:00 - 18:00 Contract Type: Fixed Term Contract - 12 months (Mat cover) Why Greencore? Following the combination with Bakkavor in January 2026, we're one of the UK's leading creators of convenience food, driven by a simple purpose: to make every day taste better. As a vibrant and fast-moving business, we're proud to employ over 28,000 talented colleagues across 36 manufacturing sites and 21 distribution depots in the UK and the US. Together, we bring delicious food to life. Our products cover every meal occasion from breakfast through to dinner and dessert, with lunch and snacking in between. In FY25, our shared passion helped us achieve combined revenues of approximately £4bn. Our extensive direct to store (DTS) network, with 17 depots across the UK, allows us to deliver fresh and frozen food, both our own and from trusted partners, to thousands of stores every day, ensuring consumers enjoy the very best, whenever and wherever they shop. Our site in Old Leake, just outside Boston, Lincolnshire, specialises in chilled Italian ready meals and modern deli products for a dedicated customer. The site employs around 700 people and operates in a fast-paced production environment. What you'll be doing In this busy and hands-on role as a Quality Auditor, you'll audit, monitor, and continuously improve quality systems and procedures across site operations. Working closely with operational teams, you'll provide practical technical support while maintaining and promoting quality and food safety standards in line with Greencore, customer, and legal requirements, with guidance from the QA Supervisor or Manager. Role Accountabilities • Audit compliance with QMS, GMP, and HACCP, raising clear non-conformances and driving corrective actions to closure • Apply an inquisitive audit mindset to identify root causes and reduce repeat non-conformances • Conduct traceability audits, efficiently retrieving data and presenting findings clearly • Complete sampling activities to schedule, including microbiological, nutritional, swabs, and organoleptic testing • Prepare, facilitate, and trend taste panels, escalating out-of-specification results and recommending improvements • Calibrate factory measurement equipment to schedule and manage out-of-tolerance actions • Support investigations into complaints, incidents, and out-of-specification results through audits and data analysis • Support NPD trials and product launches, including testing, shelf-life assessment, and taste panels • Provide day-to-day technical support to factory teams, audits, and customer visits • Contribute to Technical KPI delivery through audits, investigations, and proactive improvement actions • Work safely at all times, promoting strong health, safety, and environmental standards What we're looking for • A strong understanding of quality systems, GMP, HACCP, and traceability within a manufacturing environment • A proactive, detail-focused approach with a natural curiosity to challenge and improve standards • Confidence working hands-on on the factory floor, providing clear and practical technical guidance • Ability to audit effectively, identify root causes, and drive corrective and preventative actions • Strong communication skills, able to engage confidently with colleagues at all levels • A collaborative mindset, working effectively within cross-functional teams • Good organisational skills, with the ability to manage multiple priorities to deadlines • Commitment to continuous improvement and personal development • A positive, resilient approach aligned to Greencore values We're not all the same at Greencore and our differences help us to make every day taste better for all our stakeholders. We truly put our people at the core and are proud of our diversity. If this sounds like you, join us and grow with Greencore, and be a part of driving our future success. What you'll get in return • Competitive salary and job-related benefits • Holidays • Competitive matched pension up contributions • Life insurance up to 4x salary • Company share save scheme • Greencore Qualifications • Exclusive Greencore employee discount platform • Access to a full Wellbeing Centre platform • Enhanced parental leave and menopause policies Throughout your time at Greencore, you will be supported with on-the-job training and development opportunities to further your career.
May 17, 2026
Seasonal
Quality Auditor Salary: Competitive salary Benefits: Company share save scheme, Competitive matched pension up contributions, Life insurance up to 4x salary Location: Old Leake (PE22 9PN) Near Boston Ways of Working: Site Based Hours of work: 3's & 2's - 06:00 - 18:00 Contract Type: Fixed Term Contract - 12 months (Mat cover) Why Greencore? Following the combination with Bakkavor in January 2026, we're one of the UK's leading creators of convenience food, driven by a simple purpose: to make every day taste better. As a vibrant and fast-moving business, we're proud to employ over 28,000 talented colleagues across 36 manufacturing sites and 21 distribution depots in the UK and the US. Together, we bring delicious food to life. Our products cover every meal occasion from breakfast through to dinner and dessert, with lunch and snacking in between. In FY25, our shared passion helped us achieve combined revenues of approximately £4bn. Our extensive direct to store (DTS) network, with 17 depots across the UK, allows us to deliver fresh and frozen food, both our own and from trusted partners, to thousands of stores every day, ensuring consumers enjoy the very best, whenever and wherever they shop. Our site in Old Leake, just outside Boston, Lincolnshire, specialises in chilled Italian ready meals and modern deli products for a dedicated customer. The site employs around 700 people and operates in a fast-paced production environment. What you'll be doing In this busy and hands-on role as a Quality Auditor, you'll audit, monitor, and continuously improve quality systems and procedures across site operations. Working closely with operational teams, you'll provide practical technical support while maintaining and promoting quality and food safety standards in line with Greencore, customer, and legal requirements, with guidance from the QA Supervisor or Manager. Role Accountabilities • Audit compliance with QMS, GMP, and HACCP, raising clear non-conformances and driving corrective actions to closure • Apply an inquisitive audit mindset to identify root causes and reduce repeat non-conformances • Conduct traceability audits, efficiently retrieving data and presenting findings clearly • Complete sampling activities to schedule, including microbiological, nutritional, swabs, and organoleptic testing • Prepare, facilitate, and trend taste panels, escalating out-of-specification results and recommending improvements • Calibrate factory measurement equipment to schedule and manage out-of-tolerance actions • Support investigations into complaints, incidents, and out-of-specification results through audits and data analysis • Support NPD trials and product launches, including testing, shelf-life assessment, and taste panels • Provide day-to-day technical support to factory teams, audits, and customer visits • Contribute to Technical KPI delivery through audits, investigations, and proactive improvement actions • Work safely at all times, promoting strong health, safety, and environmental standards What we're looking for • A strong understanding of quality systems, GMP, HACCP, and traceability within a manufacturing environment • A proactive, detail-focused approach with a natural curiosity to challenge and improve standards • Confidence working hands-on on the factory floor, providing clear and practical technical guidance • Ability to audit effectively, identify root causes, and drive corrective and preventative actions • Strong communication skills, able to engage confidently with colleagues at all levels • A collaborative mindset, working effectively within cross-functional teams • Good organisational skills, with the ability to manage multiple priorities to deadlines • Commitment to continuous improvement and personal development • A positive, resilient approach aligned to Greencore values We're not all the same at Greencore and our differences help us to make every day taste better for all our stakeholders. We truly put our people at the core and are proud of our diversity. If this sounds like you, join us and grow with Greencore, and be a part of driving our future success. What you'll get in return • Competitive salary and job-related benefits • Holidays • Competitive matched pension up contributions • Life insurance up to 4x salary • Company share save scheme • Greencore Qualifications • Exclusive Greencore employee discount platform • Access to a full Wellbeing Centre platform • Enhanced parental leave and menopause policies Throughout your time at Greencore, you will be supported with on-the-job training and development opportunities to further your career.
Calling all Commissioning and Qualification Engineers who have worked on high end capital equipment within the Pharma, Cosmetics or Food and Beverage industry. I want to speak to you about a critical role. Our client who supplies reference level process manufacturing equipment from their European principal suppliers to top tier pharmaceutical manufacturers in the UK and Ireland are looking to appoint a highly skilled and experienced Commissioning Engineer to work on the high profile projects. The projects can range from low complexity modifications to larger capital equipment contracts which are in the range of £250k-£2m and typically have a 2month design phase, 4month build phase and a 5-12 month installation, testing and qualification stage. As part of the Operations Team the C&Q Engineer will provide pre-delivery testing, installation, re-assembly, start up, commissioning, IQOQ, cycle development, novel project works and breakdown support in line with contractual commitments. The role is site based and involves frequent travel and stays away. Our client are technical experts in their field and this customer facing hands on technical role is crucial to delivering compliant projects to agreed scope and timelines. Key Attributes Excellent written and spoken English & communication skills, Excellent customer handling, planning and organisational skills An engineering or technology qualification (degree or equivalent) Must have an analytical way of thinking and understand how process equipment works and interacts with its environment. Must like the challenge of working with bespoke equipment where bugs are not all found before delivery and where commissioning could be seen as the final part of the design-set-up of customised plant. Therefore, the operation of all our equipment needs to be understood from core principles rather than reading from a manual or work repetition. High attention to detail with the ability to pre-empt problems and seek solutions Must have a good understanding of automation/controls technology and mechanical/electrical engineering. Knowledge of sterile process technology and pharmaceutical industry would be useful. Minimum 5 years' experience in similar site role. Must be able to demonstrate proficiency with commonly used computer programs. These include MS Windows, MS Word and MS Excel Able to work effectively and efficiently autonomously whilst being an integral part of a team Frequent travel and stays away of multiple consecutive weeks are a fundamental element of the role. Normally travel will be within the UK and Ireland but occasional travel to elsewhere in Europe can be expected Must have a flexible and adaptive attitude and be able to work on own initiative, sometimes under pressure Have a full and clean driving licence Hold a valid passport for travel within Europe Job Description Role Reporting to the Technical Manager and working closely with the Project team and Technology SME's the C&Q Engineer in engaged with the installation, commissioning, testing, optimisation and validation of process equipment to make sure it is functioning correctly and produces the expected results. In doing so the C&Q engineer brings an item of equipment or a system to the point at which it can be used most effectively, the C&Q engineer must therefore possess a thorough understanding of the equipment design, its intended use and what Steritech are committed to provide. Primary: (in no particular order) Provide installation, re-assembly, start up, commissioning, IQOQ, cycle development, novel project works and breakdown support in line with contractual commitments and to a standard consistent with the high quality of the equipment and services our client supply, representing the company in a professional and dutiful manner at all times. Role specific administration such as reporting, invoicing, expenses, and time sheets Effective communications to our customers, internally at our client and with their suppliers. Proper and conscientious management when in control of our clients equipment, including test equipment, computer equipment etc. As requested by management be an active contributor in new equipment design qualification process discussions When requested by management support colleagues in meetings where expertise/experience can be beneficial e.g., Risk Assessment, FMECA, HAZOP and RCA In the pursuit of site activities be a front-line interface with principal supplier automation, engineering and process departments. Disseminate information as required Provision of Technical Support to both to customers and internally to colleagues Support the wider operations teams through the provision of routine services as and when requested e.g., equipment maintenance, calibration and technical intervention services Secondary: (in no particular order) Train and gain experience in the equipment and services our client offers, plus the market and expectations of our customers. Contribute to other departments initiatives (technical research, training preparation and/or delivery, special project management, documentation improvements, technical report preparation etc.) Any other tasks as may be reasonably required.
May 16, 2026
Full time
Calling all Commissioning and Qualification Engineers who have worked on high end capital equipment within the Pharma, Cosmetics or Food and Beverage industry. I want to speak to you about a critical role. Our client who supplies reference level process manufacturing equipment from their European principal suppliers to top tier pharmaceutical manufacturers in the UK and Ireland are looking to appoint a highly skilled and experienced Commissioning Engineer to work on the high profile projects. The projects can range from low complexity modifications to larger capital equipment contracts which are in the range of £250k-£2m and typically have a 2month design phase, 4month build phase and a 5-12 month installation, testing and qualification stage. As part of the Operations Team the C&Q Engineer will provide pre-delivery testing, installation, re-assembly, start up, commissioning, IQOQ, cycle development, novel project works and breakdown support in line with contractual commitments. The role is site based and involves frequent travel and stays away. Our client are technical experts in their field and this customer facing hands on technical role is crucial to delivering compliant projects to agreed scope and timelines. Key Attributes Excellent written and spoken English & communication skills, Excellent customer handling, planning and organisational skills An engineering or technology qualification (degree or equivalent) Must have an analytical way of thinking and understand how process equipment works and interacts with its environment. Must like the challenge of working with bespoke equipment where bugs are not all found before delivery and where commissioning could be seen as the final part of the design-set-up of customised plant. Therefore, the operation of all our equipment needs to be understood from core principles rather than reading from a manual or work repetition. High attention to detail with the ability to pre-empt problems and seek solutions Must have a good understanding of automation/controls technology and mechanical/electrical engineering. Knowledge of sterile process technology and pharmaceutical industry would be useful. Minimum 5 years' experience in similar site role. Must be able to demonstrate proficiency with commonly used computer programs. These include MS Windows, MS Word and MS Excel Able to work effectively and efficiently autonomously whilst being an integral part of a team Frequent travel and stays away of multiple consecutive weeks are a fundamental element of the role. Normally travel will be within the UK and Ireland but occasional travel to elsewhere in Europe can be expected Must have a flexible and adaptive attitude and be able to work on own initiative, sometimes under pressure Have a full and clean driving licence Hold a valid passport for travel within Europe Job Description Role Reporting to the Technical Manager and working closely with the Project team and Technology SME's the C&Q Engineer in engaged with the installation, commissioning, testing, optimisation and validation of process equipment to make sure it is functioning correctly and produces the expected results. In doing so the C&Q engineer brings an item of equipment or a system to the point at which it can be used most effectively, the C&Q engineer must therefore possess a thorough understanding of the equipment design, its intended use and what Steritech are committed to provide. Primary: (in no particular order) Provide installation, re-assembly, start up, commissioning, IQOQ, cycle development, novel project works and breakdown support in line with contractual commitments and to a standard consistent with the high quality of the equipment and services our client supply, representing the company in a professional and dutiful manner at all times. Role specific administration such as reporting, invoicing, expenses, and time sheets Effective communications to our customers, internally at our client and with their suppliers. Proper and conscientious management when in control of our clients equipment, including test equipment, computer equipment etc. As requested by management be an active contributor in new equipment design qualification process discussions When requested by management support colleagues in meetings where expertise/experience can be beneficial e.g., Risk Assessment, FMECA, HAZOP and RCA In the pursuit of site activities be a front-line interface with principal supplier automation, engineering and process departments. Disseminate information as required Provision of Technical Support to both to customers and internally to colleagues Support the wider operations teams through the provision of routine services as and when requested e.g., equipment maintenance, calibration and technical intervention services Secondary: (in no particular order) Train and gain experience in the equipment and services our client offers, plus the market and expectations of our customers. Contribute to other departments initiatives (technical research, training preparation and/or delivery, special project management, documentation improvements, technical report preparation etc.) Any other tasks as may be reasonably required.
Business Development Manager - Precision Engineering Solutions Location: UK (Field-Based, South) Salary: Up to 70,000 Basic + 20% Bonus + Car/Allowance + Excellent Benefits The Opportunity This role is built for a technically qualified sales professional who understands precision engineering - not just selling, but how things are made. You'll be driving new business for a well-established manufacturer delivering high-precision CNC machining and engineered solutions into complex, high-spec industries (including aerospace, defence, energy, industrial, and advanced manufacturing). This is a consultative, engineering-led sales role . You'll work closely with customers to interpret drawings, understand specifications, and position the business as a trusted manufacturing partner - not just a supplier. What You'll Be Doing Winning new business for precision CNC machining and complex engineered components Engaging with engineering, technical, and procurement stakeholders Interpreting customer requirements, drawings, and specifications Managing long, multi-stage sales cycles from initial engagement through to contract award Developing strategic relationships with OEMs and Tier-level manufacturers Collaborating closely with internal engineering teams to shape solutions Building a strong pipeline and delivering against revenue and margin targets What We're Looking For Engineering qualification (essential) - e.g. Mechanical Engineering, Manufacturing, or similar Proven track record in technical / engineering-led sales (e.g. CNC machining, precision engineering, fabrication, or similar) Ability to confidently engage with design engineers and technical stakeholders Strong understanding of manufacturing processes and engineering drawings Experience managing complex, consultative sales cycles Commercially astute with strong negotiation and closing skills Self-sufficient, driven, and comfortable in a field-based role Sector experience (Aerospace/Defence) is beneficial but not essential - we're more interested in your engineering mindset and solution-selling capability. What's in It for You Up to 70,000 basic salary 20% performance bonus Company car or allowance Pension scheme Life insurance Clear scope to grow and shape your territory Why Join? You'll be part of a highly capable precision engineering business with strong technical backing and the ability to deliver complex, high-value work. This is an opportunity to: Sell engineering solutions, not commodities Work with technically credible colleagues and customers Build long-term partnerships in demanding industries Play a key role in shaping commercial growth If you're an engineer who moved into sales - and want a role where your technical background is genuinely valued - this is the kind of position that will suit you. At Morgan Ryder we can provide you with a full range of employment opportunities from short term and fixed term temporary vacancies to permanent positions. We recruit for companies that operate in the following industries: Defence Equipment, Food and Drink Manufacturers, FMCG, Packaging, Engineering, Automotive, Aerospace, Warehousing, Logistics, Waste Management, Petro Chemical, Pharmaceutical, Power & Renewable Energy. Our commitment: Equal opportunities are important to us. We believe that diversity and inclusion at Morgan Ryder Associates are critical to our success as DE&I positive company, so we want to recruit, develop, and keep the best talent. We encourage applications from everyone, regardless of background, gender identity, sexual orientation, disability status, ethnicity, belief, age, family or parental status, and any other characteristic. Please note that calls to and from the offices of Morgan Ryder Associates Ltd. may be monitored or recorded. This is to ensure compliance with regulatory procedures, record business transactions and for training purposes.
May 16, 2026
Full time
Business Development Manager - Precision Engineering Solutions Location: UK (Field-Based, South) Salary: Up to 70,000 Basic + 20% Bonus + Car/Allowance + Excellent Benefits The Opportunity This role is built for a technically qualified sales professional who understands precision engineering - not just selling, but how things are made. You'll be driving new business for a well-established manufacturer delivering high-precision CNC machining and engineered solutions into complex, high-spec industries (including aerospace, defence, energy, industrial, and advanced manufacturing). This is a consultative, engineering-led sales role . You'll work closely with customers to interpret drawings, understand specifications, and position the business as a trusted manufacturing partner - not just a supplier. What You'll Be Doing Winning new business for precision CNC machining and complex engineered components Engaging with engineering, technical, and procurement stakeholders Interpreting customer requirements, drawings, and specifications Managing long, multi-stage sales cycles from initial engagement through to contract award Developing strategic relationships with OEMs and Tier-level manufacturers Collaborating closely with internal engineering teams to shape solutions Building a strong pipeline and delivering against revenue and margin targets What We're Looking For Engineering qualification (essential) - e.g. Mechanical Engineering, Manufacturing, or similar Proven track record in technical / engineering-led sales (e.g. CNC machining, precision engineering, fabrication, or similar) Ability to confidently engage with design engineers and technical stakeholders Strong understanding of manufacturing processes and engineering drawings Experience managing complex, consultative sales cycles Commercially astute with strong negotiation and closing skills Self-sufficient, driven, and comfortable in a field-based role Sector experience (Aerospace/Defence) is beneficial but not essential - we're more interested in your engineering mindset and solution-selling capability. What's in It for You Up to 70,000 basic salary 20% performance bonus Company car or allowance Pension scheme Life insurance Clear scope to grow and shape your territory Why Join? You'll be part of a highly capable precision engineering business with strong technical backing and the ability to deliver complex, high-value work. This is an opportunity to: Sell engineering solutions, not commodities Work with technically credible colleagues and customers Build long-term partnerships in demanding industries Play a key role in shaping commercial growth If you're an engineer who moved into sales - and want a role where your technical background is genuinely valued - this is the kind of position that will suit you. At Morgan Ryder we can provide you with a full range of employment opportunities from short term and fixed term temporary vacancies to permanent positions. We recruit for companies that operate in the following industries: Defence Equipment, Food and Drink Manufacturers, FMCG, Packaging, Engineering, Automotive, Aerospace, Warehousing, Logistics, Waste Management, Petro Chemical, Pharmaceutical, Power & Renewable Energy. Our commitment: Equal opportunities are important to us. We believe that diversity and inclusion at Morgan Ryder Associates are critical to our success as DE&I positive company, so we want to recruit, develop, and keep the best talent. We encourage applications from everyone, regardless of background, gender identity, sexual orientation, disability status, ethnicity, belief, age, family or parental status, and any other characteristic. Please note that calls to and from the offices of Morgan Ryder Associates Ltd. may be monitored or recorded. This is to ensure compliance with regulatory procedures, record business transactions and for training purposes.
Technical Services Manager - Inbound Logistics (BIL) Why Greencore? Following the combination with Bakkavor in January 2026, we're one of the UK's leading creators of convenience food, driven by a simple purpose: to make everyday taste better. As a vibrant and fast-moving business, we're proud to employ over 28,000 talented colleagues across 36 manufacturing sites and 21 distribution depots in the UK and the US. Together, we bring delicious food to life. Our products cover every meal occasion from breakfast through to dinner and dessert, with lunch and snacking in between. In FY25, our shared passion helped us achieve combined revenues of approximately £4bn. Our extensive direct to store (DTS) network, with 17 depots across the UK, allows us to deliver fresh and frozen food both our own and from trusted partners to thousands of stores every day, ensuring consumers enjoy the very best, whenever and wherever they shop. Role Purpose: Manage the Technical Services function for inbound supply chain, this may include; Raw Materials, Packaging control, Quality Systems and Technical Administration. Interfacing and providing effective communication with group services, sites, suppliers and authorities. Key Accountabilities: Raw Materials - Inbound Logistics (BIL) is technically responsible for the inbound supply chain of raw materials, but must ensure all raw material product approvals, specs, and other standards are compliant before launch via BIL. Any issues should be proactively dealt with and escalated to the relevant technical manager. Quality Management Systems - Manage and develop the Quality Management System across the BIL functions, ensuring that all QMS documentation is up to date, relevant & controlled and meets the requirements of accreditations held, legislation, industry standards and Greencore group. Where requirements for Inbound Supply chain are not specified, or not considered complete enough, then review customer, business and industry codes of practice (including AEO and other related areas) present proposals and actions to GM and Senior BIL team to ensure CI. Update QMS as appropriate, communicating to the business, central technical and sites effectively Inbound Supply Chain - Understand and apply relevant standards, codes of practice and ensure all legal requirements are achieved and maintained to ensure effective controls for assuring supply chain integrity and security. Including administration of relevant set up information for service suppliers and product controls through risk assessment. Communicating integrity controls for sites receiving materials through BIL operation. Audit - To establish and maintain a process of internal auditing against the QMS to ensure compliance, actions are communicated and closed out within agreed timescales to drive standards and compliance. To establish or review and amend procedures as required by accreditations held, new business initiatives or new internal systems. Management and support - Proactively participate in the Senior team, provide practical support across the different functional teams in BIL, to drive to promote a Quality Assurance culture in the business Communication - To positively communicate technical issues and horizon scan future concerns. To collate information relating to food issues / scares and similar events and communicate to Technical Management Team and other key business interfaces as required. Communication with GC Central technical function, Site Technical teams and BIL SLT HACCP - Analysis and implementation of appropriate controls for inbound supply chain, using risk assessment & HACCP protocols Health and Safety - To operate in a safe working manner and support the site/business on continuous improvement relating to health, safety and the environment. Knowledge, Skills and Experience Service Supplier Management Greencore site visits Advanced HACCP System management and auditing skills Influencing skills Presentation skills Customs and SPS controls for importing goods What you'll get in return: Competitive salary and job-related benefits 25 days Holiday Competitive matched pension contributions Company share save scheme Greencore Qualifications Exclusive Greencore employee discount platform Access to a full Wellbeing Centre platform
May 16, 2026
Full time
Technical Services Manager - Inbound Logistics (BIL) Why Greencore? Following the combination with Bakkavor in January 2026, we're one of the UK's leading creators of convenience food, driven by a simple purpose: to make everyday taste better. As a vibrant and fast-moving business, we're proud to employ over 28,000 talented colleagues across 36 manufacturing sites and 21 distribution depots in the UK and the US. Together, we bring delicious food to life. Our products cover every meal occasion from breakfast through to dinner and dessert, with lunch and snacking in between. In FY25, our shared passion helped us achieve combined revenues of approximately £4bn. Our extensive direct to store (DTS) network, with 17 depots across the UK, allows us to deliver fresh and frozen food both our own and from trusted partners to thousands of stores every day, ensuring consumers enjoy the very best, whenever and wherever they shop. Role Purpose: Manage the Technical Services function for inbound supply chain, this may include; Raw Materials, Packaging control, Quality Systems and Technical Administration. Interfacing and providing effective communication with group services, sites, suppliers and authorities. Key Accountabilities: Raw Materials - Inbound Logistics (BIL) is technically responsible for the inbound supply chain of raw materials, but must ensure all raw material product approvals, specs, and other standards are compliant before launch via BIL. Any issues should be proactively dealt with and escalated to the relevant technical manager. Quality Management Systems - Manage and develop the Quality Management System across the BIL functions, ensuring that all QMS documentation is up to date, relevant & controlled and meets the requirements of accreditations held, legislation, industry standards and Greencore group. Where requirements for Inbound Supply chain are not specified, or not considered complete enough, then review customer, business and industry codes of practice (including AEO and other related areas) present proposals and actions to GM and Senior BIL team to ensure CI. Update QMS as appropriate, communicating to the business, central technical and sites effectively Inbound Supply Chain - Understand and apply relevant standards, codes of practice and ensure all legal requirements are achieved and maintained to ensure effective controls for assuring supply chain integrity and security. Including administration of relevant set up information for service suppliers and product controls through risk assessment. Communicating integrity controls for sites receiving materials through BIL operation. Audit - To establish and maintain a process of internal auditing against the QMS to ensure compliance, actions are communicated and closed out within agreed timescales to drive standards and compliance. To establish or review and amend procedures as required by accreditations held, new business initiatives or new internal systems. Management and support - Proactively participate in the Senior team, provide practical support across the different functional teams in BIL, to drive to promote a Quality Assurance culture in the business Communication - To positively communicate technical issues and horizon scan future concerns. To collate information relating to food issues / scares and similar events and communicate to Technical Management Team and other key business interfaces as required. Communication with GC Central technical function, Site Technical teams and BIL SLT HACCP - Analysis and implementation of appropriate controls for inbound supply chain, using risk assessment & HACCP protocols Health and Safety - To operate in a safe working manner and support the site/business on continuous improvement relating to health, safety and the environment. Knowledge, Skills and Experience Service Supplier Management Greencore site visits Advanced HACCP System management and auditing skills Influencing skills Presentation skills Customs and SPS controls for importing goods What you'll get in return: Competitive salary and job-related benefits 25 days Holiday Competitive matched pension contributions Company share save scheme Greencore Qualifications Exclusive Greencore employee discount platform Access to a full Wellbeing Centre platform
Talent Guardian is proud to be partnering with a well-established and growing food manufacturing business in Wembley to recruit an ambitious Account Executive to join their commercial team. This is a fantastic opportunity for somebody looking to develop a long-term career within FMCG sales and account management. The business operates within a fast-paced food manufacturing environment, supplying major retail and convenience customers across the UK. You ll be joining a collaborative commercial team where you ll receive strong mentoring, coaching and development, with a clear pathway towards Junior Account Manager level and beyond. This role will support the commercial team across day-to-day account management, forecasting, customer administration and new product launch activity. You ll gain exposure to multiple areas of the business including NPD, operations, finance and technical, making it an excellent stepping stone into a fully customer-facing commercial role. This position would suit somebody who is highly organised, analytical, commercially curious and eager to build a career within FMCG. Key Responsibilities Supporting the commercial team with day-to-day customer management activities Managing forecasts and communicating any changes across the business Supporting promotions, pricing updates and customer administration Monitoring customer service levels and reporting on supply performance Sales forecasting and variance reporting by SKU/customer Supporting NPD launches and product lifecycle management Working cross-functionally with NPD, operations, technical and finance teams Managing and analysing customer sales data and reporting insights to the wider team Building strong relationships with customer buying teams and internal stakeholders Supporting product costings and commercial reporting About You Degree educated or equivalent preferred Previous food/FMCG experience beneficial but not essential Strong Excel, PowerPoint and data analysis skills Organised with excellent attention to detail Commercially minded with strong communication skills Able to manage multiple priorities within a fast-paced environment Keen to learn and develop within account management and FMCG sales Why Apply? Excellent development and progression opportunities Exposure to major UK retail and convenience customers Collaborative and supportive culture Fast-paced and commercially driven environment Opportunity to build a long-term career within FMCG If you re looking for an exciting opportunity to develop your commercial career within a growing food manufacturing business, we d love to hear from you. Apply directly or contact Talent Guardian for more information.
May 16, 2026
Full time
Talent Guardian is proud to be partnering with a well-established and growing food manufacturing business in Wembley to recruit an ambitious Account Executive to join their commercial team. This is a fantastic opportunity for somebody looking to develop a long-term career within FMCG sales and account management. The business operates within a fast-paced food manufacturing environment, supplying major retail and convenience customers across the UK. You ll be joining a collaborative commercial team where you ll receive strong mentoring, coaching and development, with a clear pathway towards Junior Account Manager level and beyond. This role will support the commercial team across day-to-day account management, forecasting, customer administration and new product launch activity. You ll gain exposure to multiple areas of the business including NPD, operations, finance and technical, making it an excellent stepping stone into a fully customer-facing commercial role. This position would suit somebody who is highly organised, analytical, commercially curious and eager to build a career within FMCG. Key Responsibilities Supporting the commercial team with day-to-day customer management activities Managing forecasts and communicating any changes across the business Supporting promotions, pricing updates and customer administration Monitoring customer service levels and reporting on supply performance Sales forecasting and variance reporting by SKU/customer Supporting NPD launches and product lifecycle management Working cross-functionally with NPD, operations, technical and finance teams Managing and analysing customer sales data and reporting insights to the wider team Building strong relationships with customer buying teams and internal stakeholders Supporting product costings and commercial reporting About You Degree educated or equivalent preferred Previous food/FMCG experience beneficial but not essential Strong Excel, PowerPoint and data analysis skills Organised with excellent attention to detail Commercially minded with strong communication skills Able to manage multiple priorities within a fast-paced environment Keen to learn and develop within account management and FMCG sales Why Apply? Excellent development and progression opportunities Exposure to major UK retail and convenience customers Collaborative and supportive culture Fast-paced and commercially driven environment Opportunity to build a long-term career within FMCG If you re looking for an exciting opportunity to develop your commercial career within a growing food manufacturing business, we d love to hear from you. Apply directly or contact Talent Guardian for more information.
New Product Development Manager (NPD) Currently recruiting for a NPD New Product Development Manager for a successful food manufacture. You will manage multiple projects from concept to launch working closely with commercial production and technical teams. This is a creative role, with exciting seasonal (award wining) launches especially over Summer and Christmas ranges The site has seen huge investment within their NPD showcase kitchen and facilities Skills / Experience Working in an NPD / new product development role for a food or drinks manufacture Liaising with key stakeholders plus customers ideally UK retailers Working in a fast paced environment able to prioritise workload Creative and passionate mindset for new products and innovation Role Salary - DOE Hours -9am- 5pm Days - Monday to Friday Pension Healthcare Genuine career development and progression Mach is acting as an agent for this vacancy
May 16, 2026
Full time
New Product Development Manager (NPD) Currently recruiting for a NPD New Product Development Manager for a successful food manufacture. You will manage multiple projects from concept to launch working closely with commercial production and technical teams. This is a creative role, with exciting seasonal (award wining) launches especially over Summer and Christmas ranges The site has seen huge investment within their NPD showcase kitchen and facilities Skills / Experience Working in an NPD / new product development role for a food or drinks manufacture Liaising with key stakeholders plus customers ideally UK retailers Working in a fast paced environment able to prioritise workload Creative and passionate mindset for new products and innovation Role Salary - DOE Hours -9am- 5pm Days - Monday to Friday Pension Healthcare Genuine career development and progression Mach is acting as an agent for this vacancy
A genuinely exciting Area Sales Manager/Industrial Weighing Equipment Sales Manager position has arisen with this successful and expanding weighbridge and weighbridge systems manufacturer. They are looking for an experienced sales professional to sell their range of equipment to a host of end users across the Southwest of England. If this role sounds of interest, please apply ASAP. LOCATION : Candidates will live in the Glasgow to Edinburgh area (central belt) and will cover the whole of Scotland as as a territory. You will manage your own diary, book your own appointments and work from home when not out visiting clients. SALARY: Circa 40k as a basic salary with an OTE of approximately 60k with a fully expensed company car, mobile, laptop and 25 days annual leave. As Area Sales Manager/Industrial Weighing Equipment Sales Manager; your responsibilities will be field based sale, to promote & sell the companies full range of weighing equipment and maintenance contracts into all areas of manufacturing, logistics, engineering, chemical, food and recycling industries. You will be able to demonstrate the following skills and attributes: Technically competent & able to specify systems & solutions from the simple to complex. Self-Motivated target driven individual. Consistent sales target achiever Management of sales territory with minimum supervision Managing & growing existing client accounts Managing & developing dormant clients Managing & developing new business opportunities across all industrial sectors Successful candidates will have minimum of 2 years Field Sales, Area Sales Manager or Territory Sales Manager experience. You are likely to have relevant engineering and commercial qualifications and have a proven track record within sales roles. Strong interpersonal and communication skills are a must as you will be building relationships at all levels to create success. Contact: In the first instance please send your CV to Kelly Duke ELIGIBILITY All vacancies are based in the UK. It is unlawful to employ a person who does not have permission to live and work in the UK and we will therefore only consider applications from candidates who are eligible to work in the EU. Scarlet Selection are UK-based recruitment specialists, placing experienced professionals across all industry sectors. The services Scarlet Selection provides are those of an employment agency.
May 16, 2026
Full time
A genuinely exciting Area Sales Manager/Industrial Weighing Equipment Sales Manager position has arisen with this successful and expanding weighbridge and weighbridge systems manufacturer. They are looking for an experienced sales professional to sell their range of equipment to a host of end users across the Southwest of England. If this role sounds of interest, please apply ASAP. LOCATION : Candidates will live in the Glasgow to Edinburgh area (central belt) and will cover the whole of Scotland as as a territory. You will manage your own diary, book your own appointments and work from home when not out visiting clients. SALARY: Circa 40k as a basic salary with an OTE of approximately 60k with a fully expensed company car, mobile, laptop and 25 days annual leave. As Area Sales Manager/Industrial Weighing Equipment Sales Manager; your responsibilities will be field based sale, to promote & sell the companies full range of weighing equipment and maintenance contracts into all areas of manufacturing, logistics, engineering, chemical, food and recycling industries. You will be able to demonstrate the following skills and attributes: Technically competent & able to specify systems & solutions from the simple to complex. Self-Motivated target driven individual. Consistent sales target achiever Management of sales territory with minimum supervision Managing & growing existing client accounts Managing & developing dormant clients Managing & developing new business opportunities across all industrial sectors Successful candidates will have minimum of 2 years Field Sales, Area Sales Manager or Territory Sales Manager experience. You are likely to have relevant engineering and commercial qualifications and have a proven track record within sales roles. Strong interpersonal and communication skills are a must as you will be building relationships at all levels to create success. Contact: In the first instance please send your CV to Kelly Duke ELIGIBILITY All vacancies are based in the UK. It is unlawful to employ a person who does not have permission to live and work in the UK and we will therefore only consider applications from candidates who are eligible to work in the EU. Scarlet Selection are UK-based recruitment specialists, placing experienced professionals across all industry sectors. The services Scarlet Selection provides are those of an employment agency.
Quality Auditor Salary: Competitive salary Benefits: Company share save scheme, Competitive matched pension up contributions, Life insurance up to 4x salary Location: Devizes, SN10 2EU Ways of Working: Site Based Hours of work: 4 on 4 off / 18:00 - 06:00 Contract Type: Permanent Why Greencore? Following the combination with Bakkavor in January 2026, we're one of the UK's leading creators of convenience food, driven by a simple purpose: to make every day taste better. As a vibrant and fast-moving business, we're proud to employ over 28,000 talented colleagues across 36 manufacturing sites and 21 distribution depots in the UK and the US. Together, we bring delicious food to life. Our products cover every meal occasion from breakfast through to dinner and dessert, with lunch and snacking in between. In FY25, our shared passion helped us achieve combined revenues of approximately £4bn. Our extensive direct to store (DTS) network, with 17 depots across the UK, allows us to deliver fresh and frozen food, both our own and from trusted partners to thousands of stores every day, ensuring consumers enjoy the very best, whenever and wherever they shop. Greencore Desserts is based in Devizes, Wiltshire, and specialises in making chilled desserts such as tarts, yum yums, doughnuts, pies and pastries. The site employs over 550 people and is one of three factories that are part of the Bakkavor Desserts sector in the UK. What you'll be doing In this busy and hands-on role as a Quality Auditor, you'll audit, monitor, and continuously improve quality systems and procedures across site operations. Working closely with operational teams, you'll provide practical technical support while maintaining and promoting quality and food safety standards in line with Greencore, customer, and legal requirements, with guidance from the QA Supervisor or Manager. Role Accountabilities • Audit compliance with QMS, GMP, and HACCP, raising clear non-conformances and driving corrective actions to closure • Apply an inquisitive audit mindset to identify root causes and reduce repeat non-conformances • Conduct traceability audits, efficiently retrieving data and presenting findings clearly • Complete sampling activities to schedule, including microbiological, nutritional, swabs, and organoleptic testing • Prepare, facilitate, and trend taste panels, escalating out-of-specification results and recommending improvements • Calibrate factory measurement equipment to schedule and manage out-of-tolerance actions • Support investigations into complaints, incidents, and out-of-specification results through audits and data analysis • Support NPD trials and product launches, including testing, shelf-life assessment, and taste panels • Provide day-to-day technical support to factory teams, audits, and customer visits • Contribute to Technical KPI delivery through audits, investigations, and proactive improvement actions • Work safely at all times, promoting strong health, safety, and environmental standards What we're looking for • A strong understanding of quality systems, GMP, HACCP, and traceability within a manufacturing environment • A proactive, detail-focused approach with a natural curiosity to challenge and improve standards • Confidence working hands-on on the factory floor, providing clear and practical technical guidance • Ability to audit effectively, identify root causes, and drive corrective and preventative actions • Strong communication skills, able to engage confidently with colleagues at all levels • A collaborative mindset, working effectively within cross-functional teams • Good organisational skills, with the ability to manage multiple priorities to deadlines • Commitment to continuous improvement and personal development • A positive, resilient approach aligned to Greencore values We're not all the same at Greencore and our differences help us to make every day taste better for all our stakeholders. We truly put our people at the core and are proud of our diversity. If this sounds like you, join us and grow with Greencore, and be a part of driving our future success. What you'll get in return • Competitive salary and job-related benefits • Holidays • Competitive matched pension contributions • Life insurance up to 4x salary • Company share save scheme • Greencore Qualifications • Exclusive Greencore employee discount platform • Access to a full Wellbeing Centre platform • Enhanced parental leave and menopause policies Throughout your time at Greencore, you will be supported with on-the-job training and development opportunities to further your career.
May 16, 2026
Full time
Quality Auditor Salary: Competitive salary Benefits: Company share save scheme, Competitive matched pension up contributions, Life insurance up to 4x salary Location: Devizes, SN10 2EU Ways of Working: Site Based Hours of work: 4 on 4 off / 18:00 - 06:00 Contract Type: Permanent Why Greencore? Following the combination with Bakkavor in January 2026, we're one of the UK's leading creators of convenience food, driven by a simple purpose: to make every day taste better. As a vibrant and fast-moving business, we're proud to employ over 28,000 talented colleagues across 36 manufacturing sites and 21 distribution depots in the UK and the US. Together, we bring delicious food to life. Our products cover every meal occasion from breakfast through to dinner and dessert, with lunch and snacking in between. In FY25, our shared passion helped us achieve combined revenues of approximately £4bn. Our extensive direct to store (DTS) network, with 17 depots across the UK, allows us to deliver fresh and frozen food, both our own and from trusted partners to thousands of stores every day, ensuring consumers enjoy the very best, whenever and wherever they shop. Greencore Desserts is based in Devizes, Wiltshire, and specialises in making chilled desserts such as tarts, yum yums, doughnuts, pies and pastries. The site employs over 550 people and is one of three factories that are part of the Bakkavor Desserts sector in the UK. What you'll be doing In this busy and hands-on role as a Quality Auditor, you'll audit, monitor, and continuously improve quality systems and procedures across site operations. Working closely with operational teams, you'll provide practical technical support while maintaining and promoting quality and food safety standards in line with Greencore, customer, and legal requirements, with guidance from the QA Supervisor or Manager. Role Accountabilities • Audit compliance with QMS, GMP, and HACCP, raising clear non-conformances and driving corrective actions to closure • Apply an inquisitive audit mindset to identify root causes and reduce repeat non-conformances • Conduct traceability audits, efficiently retrieving data and presenting findings clearly • Complete sampling activities to schedule, including microbiological, nutritional, swabs, and organoleptic testing • Prepare, facilitate, and trend taste panels, escalating out-of-specification results and recommending improvements • Calibrate factory measurement equipment to schedule and manage out-of-tolerance actions • Support investigations into complaints, incidents, and out-of-specification results through audits and data analysis • Support NPD trials and product launches, including testing, shelf-life assessment, and taste panels • Provide day-to-day technical support to factory teams, audits, and customer visits • Contribute to Technical KPI delivery through audits, investigations, and proactive improvement actions • Work safely at all times, promoting strong health, safety, and environmental standards What we're looking for • A strong understanding of quality systems, GMP, HACCP, and traceability within a manufacturing environment • A proactive, detail-focused approach with a natural curiosity to challenge and improve standards • Confidence working hands-on on the factory floor, providing clear and practical technical guidance • Ability to audit effectively, identify root causes, and drive corrective and preventative actions • Strong communication skills, able to engage confidently with colleagues at all levels • A collaborative mindset, working effectively within cross-functional teams • Good organisational skills, with the ability to manage multiple priorities to deadlines • Commitment to continuous improvement and personal development • A positive, resilient approach aligned to Greencore values We're not all the same at Greencore and our differences help us to make every day taste better for all our stakeholders. We truly put our people at the core and are proud of our diversity. If this sounds like you, join us and grow with Greencore, and be a part of driving our future success. What you'll get in return • Competitive salary and job-related benefits • Holidays • Competitive matched pension contributions • Life insurance up to 4x salary • Company share save scheme • Greencore Qualifications • Exclusive Greencore employee discount platform • Access to a full Wellbeing Centre platform • Enhanced parental leave and menopause policies Throughout your time at Greencore, you will be supported with on-the-job training and development opportunities to further your career.
Do you thrive in a fast-paced laboratory environment? Passionate about analytical chemistry, method development, and solving complex quality challenges? Want to play a key role behind the scenes of one of the world s most recognisable FMCG brands? We re looking for a Senior Analytical Chemist to join Monster Energy s EMEA Quality & QA team. This is a role for someone who enjoys getting hands-on in the lab, thrives on problem solving, and can combine strong technical expertise with leadership and ownership. If you re experienced with HPLC, GCMS, LCMS, analytical investigations, and laboratory operations, this is your opportunity to join a high-performing international business operating at serious scale across EMEA. The Company Monster isn t corporate. We re bold, fast, disruptive and unapologetically ambitious. Founded in 2002, Monster Energy has grown into one of the leading brands in the global energy drinks category. With 4000+ employees worldwide and 138+ million cases sold across EMEA in 2023, we operate at serious scale, but with the mindset of a challenger brand. Our brand is aggressive, cool, dark, mysterious and fun. Our culture? High-energy, accountable, and built on people who take ownership. Quality and consistency are critical to everything we do. This role plays a key part in ensuring Monster products across EMEA meet the highest standards through robust analytical testing, investigation, and continuous laboratory improvement. The Role Reporting to the Laboratory Manager, you ll be responsible for analytical testing and chemistry support across raw materials, finished products, trial samples, and investigative work within the EMEA QC laboratory. You ll play a key role in supporting laboratory operations, improving analytical methods, troubleshooting issues, and helping drive quality standards across the wider business. This is a hands-on technical role with leadership responsibility, suited to someone who combines strong analytical capability with a proactive and solutions-focused mindset. Key Responsibilities Conducting routine analysis of raw materials, finished products, trial samples, and investigative samples Operating and troubleshooting HPLC and GCMS instrumentation Supporting method development and continuous laboratory improvement initiatives Investigating analytical issues, non-conformances, and quality concerns Supporting the Laboratory Manager with SOPs, documentation, and compliance activities Managing, mentoring, and developing junior team members Presenting laboratory data, trends, and metrics where required Supporting the wider QA function with chemistry-related queries Planning and prioritising laboratory workloads effectively Ensuring all work is carried out in line with GLP standards What We re Looking For Degree qualified in Chemistry or a related scientific discipline Strong hands-on HPLC and GCMS experience Experience within a QC, food, beverage, FMCG, or contract laboratory environment Method development and troubleshooting capability Previous experience working within GLP standards Strong attention to detail and analytical thinking skills Comfortable working independently whilst also collaborating within a wider team Previous leadership or supervisory experience is highly advantageous Strong Excel and documentation capability SAP exposure would be beneficial Someone adaptable, proactive, and comfortable operating in a fast-moving environment A practical, hands-on individual who enjoys solving problems and improving processes Interested? Click Apply or message me directly The Advocate Group is the exclusive talent partner for Monster Energy. All direct or third-party applicants will be forwarded to The Advocate Group for processing.
May 16, 2026
Full time
Do you thrive in a fast-paced laboratory environment? Passionate about analytical chemistry, method development, and solving complex quality challenges? Want to play a key role behind the scenes of one of the world s most recognisable FMCG brands? We re looking for a Senior Analytical Chemist to join Monster Energy s EMEA Quality & QA team. This is a role for someone who enjoys getting hands-on in the lab, thrives on problem solving, and can combine strong technical expertise with leadership and ownership. If you re experienced with HPLC, GCMS, LCMS, analytical investigations, and laboratory operations, this is your opportunity to join a high-performing international business operating at serious scale across EMEA. The Company Monster isn t corporate. We re bold, fast, disruptive and unapologetically ambitious. Founded in 2002, Monster Energy has grown into one of the leading brands in the global energy drinks category. With 4000+ employees worldwide and 138+ million cases sold across EMEA in 2023, we operate at serious scale, but with the mindset of a challenger brand. Our brand is aggressive, cool, dark, mysterious and fun. Our culture? High-energy, accountable, and built on people who take ownership. Quality and consistency are critical to everything we do. This role plays a key part in ensuring Monster products across EMEA meet the highest standards through robust analytical testing, investigation, and continuous laboratory improvement. The Role Reporting to the Laboratory Manager, you ll be responsible for analytical testing and chemistry support across raw materials, finished products, trial samples, and investigative work within the EMEA QC laboratory. You ll play a key role in supporting laboratory operations, improving analytical methods, troubleshooting issues, and helping drive quality standards across the wider business. This is a hands-on technical role with leadership responsibility, suited to someone who combines strong analytical capability with a proactive and solutions-focused mindset. Key Responsibilities Conducting routine analysis of raw materials, finished products, trial samples, and investigative samples Operating and troubleshooting HPLC and GCMS instrumentation Supporting method development and continuous laboratory improvement initiatives Investigating analytical issues, non-conformances, and quality concerns Supporting the Laboratory Manager with SOPs, documentation, and compliance activities Managing, mentoring, and developing junior team members Presenting laboratory data, trends, and metrics where required Supporting the wider QA function with chemistry-related queries Planning and prioritising laboratory workloads effectively Ensuring all work is carried out in line with GLP standards What We re Looking For Degree qualified in Chemistry or a related scientific discipline Strong hands-on HPLC and GCMS experience Experience within a QC, food, beverage, FMCG, or contract laboratory environment Method development and troubleshooting capability Previous experience working within GLP standards Strong attention to detail and analytical thinking skills Comfortable working independently whilst also collaborating within a wider team Previous leadership or supervisory experience is highly advantageous Strong Excel and documentation capability SAP exposure would be beneficial Someone adaptable, proactive, and comfortable operating in a fast-moving environment A practical, hands-on individual who enjoys solving problems and improving processes Interested? Click Apply or message me directly The Advocate Group is the exclusive talent partner for Monster Energy. All direct or third-party applicants will be forwarded to The Advocate Group for processing.
The CompanyA well-established specialist operating within the food ingredients and food processing supply chain, supplying chemical and functional ingredient solutions to food manufacturers and distributors across the UK. The business forms part of a wider international group, providing long-term stability and investment, while retaining a collaborative, agile, and people-focused culture at local level. The organisation is known for strong customer relationships, technical capability, and a reputation for quality and reliability.The Role An opportunity has become available with a well-established business operating in the food ingredients and food processing supply chain, supplying food manufacturers and distributors across the UK. The role focuses on driving commercial growth of food ingredient solutions, building on a strong and established platform that is ripe for further development. While part of a wider international group, the local operation offers a collaborative culture, autonomy, and the chance to make a visible impact. The position involves developing new opportunities, growing existing customer relationships, and actively building and managing a robust pipeline. Regular interaction with internal teams and customers is essential, along with planned attendance at head office two to three times per month. The Skills This role will suit a highly motivated, self-driven commercial professional with a hunter mindset. You will be comfortable opening new doors, developing pipeline, and maintaining momentum in a growth-focused environment. Experience as a Product Manager within food ingredients is essential. You will have a strong understanding of food manufacturing or food processing environments and be confident working with technical or functional ingredient solutions. You will be organised, resilient, commercially focused, and driven by results, with the ability to work independently while contributing to wider business objectives. BenefitsThe package is highly competitive and includes a strong base salary, excellent benefits package, company car, and performance-related bonus. The role offers long-term development opportunities, visibility within the business, and the chance to grow with an organisation investing in its people and portfolio.
May 16, 2026
Full time
The CompanyA well-established specialist operating within the food ingredients and food processing supply chain, supplying chemical and functional ingredient solutions to food manufacturers and distributors across the UK. The business forms part of a wider international group, providing long-term stability and investment, while retaining a collaborative, agile, and people-focused culture at local level. The organisation is known for strong customer relationships, technical capability, and a reputation for quality and reliability.The Role An opportunity has become available with a well-established business operating in the food ingredients and food processing supply chain, supplying food manufacturers and distributors across the UK. The role focuses on driving commercial growth of food ingredient solutions, building on a strong and established platform that is ripe for further development. While part of a wider international group, the local operation offers a collaborative culture, autonomy, and the chance to make a visible impact. The position involves developing new opportunities, growing existing customer relationships, and actively building and managing a robust pipeline. Regular interaction with internal teams and customers is essential, along with planned attendance at head office two to three times per month. The Skills This role will suit a highly motivated, self-driven commercial professional with a hunter mindset. You will be comfortable opening new doors, developing pipeline, and maintaining momentum in a growth-focused environment. Experience as a Product Manager within food ingredients is essential. You will have a strong understanding of food manufacturing or food processing environments and be confident working with technical or functional ingredient solutions. You will be organised, resilient, commercially focused, and driven by results, with the ability to work independently while contributing to wider business objectives. BenefitsThe package is highly competitive and includes a strong base salary, excellent benefits package, company car, and performance-related bonus. The role offers long-term development opportunities, visibility within the business, and the chance to grow with an organisation investing in its people and portfolio.
Operations Manager - Lean Manufacturing 55,000 - 63,000 + Uncapped Bonus North Belfast, County Antrim Monday-Friday, 8:30am-5pm Are you a Manufacturing or Operations leader with Lean Manufacturing experience and looking for an opportunity to leverage your knowledge by shaping a small & rapidly growing business from the ground up while progressing into General Management? This Soft Drinks company has been experiencing a significant increase in demand in recent years, supplying a range of products to major supermarkets covering things such as Juices and Flavoured Waters, and more recently Sports Drinks. They are looking for an ambitious individual to gradually inherit responsibility for the business, being supported by the owner to become familiarised with commercial and financial management as well as strategic planning and business development. The ideal candidate will have 5+ years' leadership experience in a Production, Manufacturing or Operations Management role within any area of Manufacturing and will have demonstrable experience with Lean Manufacturing & CI methodologies, along with a track record of implementing or improving processes, standards & performance. This is an amazing opportunity for a motivated and hard-working individual to take a significant step forward in their career towards the ultimate goal of business ownership. Day-to-day of the role: Leading overall site performance, including profit, customer satisfaction, compliance, and strategic business planning. Identifying areas for improvement such as waste reduction and OEE, and executing plans to increase overall profitability and compliance Overseeing factory operations, ensuring smooth production processes, effective maintenance, and appropriate escalation of technical issues. Managing food safety and quality, maintaining BRCGS standards, controlling documentation, and resolving customer complaints through corrective actions. Developing and leading the team, overseeing training, capability planning, performance management, and routine HR administration. Required Skills & Qualifications: 5+ years' Production, Manufacturing or Operations Management experience in a Manufacturing/Industrial environment Demonstrable knowledge of and experience with Lean Manufacturing methodologies and Continuous Improvement projects High level of organisation, accuracy, IT proficiency, and structured document management skills. Excellent communication skills and possessing the strong commercial acumen required to progression into general management Full driving license If you are interested in this position, click apply or contact Stuart Goble at Reed. FMCG, Manufacturing, Lean Manfuacturing, Operations Manager, Plant Manager, Factory Manager, Manufacturing Manager, Production Manager, Belfast, Northern Ireland, Antrim, County Antrim, Ballymena
May 16, 2026
Full time
Operations Manager - Lean Manufacturing 55,000 - 63,000 + Uncapped Bonus North Belfast, County Antrim Monday-Friday, 8:30am-5pm Are you a Manufacturing or Operations leader with Lean Manufacturing experience and looking for an opportunity to leverage your knowledge by shaping a small & rapidly growing business from the ground up while progressing into General Management? This Soft Drinks company has been experiencing a significant increase in demand in recent years, supplying a range of products to major supermarkets covering things such as Juices and Flavoured Waters, and more recently Sports Drinks. They are looking for an ambitious individual to gradually inherit responsibility for the business, being supported by the owner to become familiarised with commercial and financial management as well as strategic planning and business development. The ideal candidate will have 5+ years' leadership experience in a Production, Manufacturing or Operations Management role within any area of Manufacturing and will have demonstrable experience with Lean Manufacturing & CI methodologies, along with a track record of implementing or improving processes, standards & performance. This is an amazing opportunity for a motivated and hard-working individual to take a significant step forward in their career towards the ultimate goal of business ownership. Day-to-day of the role: Leading overall site performance, including profit, customer satisfaction, compliance, and strategic business planning. Identifying areas for improvement such as waste reduction and OEE, and executing plans to increase overall profitability and compliance Overseeing factory operations, ensuring smooth production processes, effective maintenance, and appropriate escalation of technical issues. Managing food safety and quality, maintaining BRCGS standards, controlling documentation, and resolving customer complaints through corrective actions. Developing and leading the team, overseeing training, capability planning, performance management, and routine HR administration. Required Skills & Qualifications: 5+ years' Production, Manufacturing or Operations Management experience in a Manufacturing/Industrial environment Demonstrable knowledge of and experience with Lean Manufacturing methodologies and Continuous Improvement projects High level of organisation, accuracy, IT proficiency, and structured document management skills. Excellent communication skills and possessing the strong commercial acumen required to progression into general management Full driving license If you are interested in this position, click apply or contact Stuart Goble at Reed. FMCG, Manufacturing, Lean Manfuacturing, Operations Manager, Plant Manager, Factory Manager, Manufacturing Manager, Production Manager, Belfast, Northern Ireland, Antrim, County Antrim, Ballymena
Pest Control Technician Cricklewood / West & North London 30,000 + 35,000 + Holiday + Pension + Training to Level 3 + Lab Training + Commercial Sites + Progression + Career Development Are you ready to take your pest control career to the next level? Do you want to work in commercial spaces, complete lab training, and progress to Level 3 qualifications-all while covering a small, manageable patch of clients? This is a well-established pest control business with a strong reputation for delivering high-quality service to food manufacturing and commercial clients. They invest in their people, offering hands-on support, lab training, and opportunities to progress to Level 3 qualifications. The company focuses on technical excellence, safety, and delivering work to the highest standards. You'll manage a small, defined patch across West and North London, delivering integrated pest management (IPM) solutions to commercial clients. All equipment and technical support are provided, along with in-house and external training. You'll have a strong support network of technical officers, biologists, and managers to help you succeed. The ideal candidate has at least 1 year of pest control experience, holds RSPH Level 2 / BPCA Level 2, and a full UK driving licence. You'll be hands-on, professional, and motivated to solve problems while maintaining excellent communication and attention to detail. The Role: Service customers across West & North London, providing IPM solutions Work with all equipment and technical support provided Deliver work to the highest standards in challenging environments Benefit from ongoing in-house and external training Enjoy career growth opportunities The Person: At least 1 year of pest control experience RSPH Level 2 / BPCA Level 2 qualified Excellent problem-solving and communication skills Fully motivated, professional, and hands-on Full UK driving licence Reference Number: (phone number removed) To apply for this role or to be considered for further roles, please click "Apply Now" or contact Maleek Randley at Rise Technical Recruitment. Rise Technical Recruitment Ltd acts an employment agency for permanent roles and an employment business for temporary roles. The salary advertised is the bracket available for this position. The actual salary paid will be dependent on your level of experience, qualifications and skill set. We are an equal opportunities employer and welcome applications from all suitable candidates Rise Technical Recruitment Ltd acts an employment agency for permanent roles and an employment business for temporary roles. The salary advertised is the bracket available for this position. The actual salary paid will be dependent on your level of experience, qualifications and skill set and will be decided by our client, the employer. Rise are not responsible or liable for any hiring decisions made by the end client. We are an equal opportunities company and welcome applications from all suitable candidates.
May 16, 2026
Full time
Pest Control Technician Cricklewood / West & North London 30,000 + 35,000 + Holiday + Pension + Training to Level 3 + Lab Training + Commercial Sites + Progression + Career Development Are you ready to take your pest control career to the next level? Do you want to work in commercial spaces, complete lab training, and progress to Level 3 qualifications-all while covering a small, manageable patch of clients? This is a well-established pest control business with a strong reputation for delivering high-quality service to food manufacturing and commercial clients. They invest in their people, offering hands-on support, lab training, and opportunities to progress to Level 3 qualifications. The company focuses on technical excellence, safety, and delivering work to the highest standards. You'll manage a small, defined patch across West and North London, delivering integrated pest management (IPM) solutions to commercial clients. All equipment and technical support are provided, along with in-house and external training. You'll have a strong support network of technical officers, biologists, and managers to help you succeed. The ideal candidate has at least 1 year of pest control experience, holds RSPH Level 2 / BPCA Level 2, and a full UK driving licence. You'll be hands-on, professional, and motivated to solve problems while maintaining excellent communication and attention to detail. The Role: Service customers across West & North London, providing IPM solutions Work with all equipment and technical support provided Deliver work to the highest standards in challenging environments Benefit from ongoing in-house and external training Enjoy career growth opportunities The Person: At least 1 year of pest control experience RSPH Level 2 / BPCA Level 2 qualified Excellent problem-solving and communication skills Fully motivated, professional, and hands-on Full UK driving licence Reference Number: (phone number removed) To apply for this role or to be considered for further roles, please click "Apply Now" or contact Maleek Randley at Rise Technical Recruitment. Rise Technical Recruitment Ltd acts an employment agency for permanent roles and an employment business for temporary roles. The salary advertised is the bracket available for this position. The actual salary paid will be dependent on your level of experience, qualifications and skill set. We are an equal opportunities employer and welcome applications from all suitable candidates Rise Technical Recruitment Ltd acts an employment agency for permanent roles and an employment business for temporary roles. The salary advertised is the bracket available for this position. The actual salary paid will be dependent on your level of experience, qualifications and skill set and will be decided by our client, the employer. Rise are not responsible or liable for any hiring decisions made by the end client. We are an equal opportunities company and welcome applications from all suitable candidates.
More About The Role Our Technical / Quality team are a very important team when it comes to Morrisons Manufacturing. It's down to them to ensure we're legally compliant from a food safety point of view. Our sites are super busy, ever-demanding and our standards are high - keeping our Technical team busy every day. Reporting to the Shift Technical Manager, you will: Monitor, control and audit the production process Ensure that conformity and non-conformity are communicated, followed up and closed off. Investigate any food safety incidents applying root cause analysis and ensure that the day to day site technical function is achieved Support the site management team during any external accreditation such as BRC and Morrisons manufacturing standards Ensure that the site production is supported during the launch of any new product line About You As well as a keen eye for detail you will also need: The confidence to challenge with a proactive and can do attitude To be a team player and an effective communicator Good PC skills (especially Google) Food experience in a technical or similar type role. A HACCP qualification or a food safety qualification (ideally) In return for your hard work we will offer you: Six weeks holiday (including bank holidays) and a guaranteed day off that's important to you - whether that be a birthday, religious holiday or a special occasion 15% discount in our supermarkets and convenience stores available from the day you join us Additional 10% discount card for a Friend or Family member Career progression and development opportunities Subsidised staff canteen Competitive pension and life assurance Healthcare/Well-being benefits including Aviva Digital GP Morrisons MyPerks with discounts at high street shops, cinemas and gyms, and lots more Optional Payroll charity donations A range of family friendly policies including 26 weeks maternity and adoption leave along with neonatal and fertility leave About The Company You ll find a great big welcome here at Myton Food Group - the part of our business that looks after manufacturing, whilst maintaining strong roots within Morrisons Supermarkets. At Myton Food Group, we have a legacy to be proud of. We re British farming s biggest single direct customer. We buy from highly valued suppliers. And we re passionate about the quality of our food. Today, we have 19 manufacturing sites across the UK, where we pack and process fresh meats and fish, savoury and sweet pies, fruit and veg, flower bouquets, bread and lots more. We really do stand out in the world of food manufacturing. But what we re especially proud of is the way we all get stuck in and work as a team, in partnership across our supply chain. Read more about what we do at our Myton Food Group website.
May 16, 2026
Full time
More About The Role Our Technical / Quality team are a very important team when it comes to Morrisons Manufacturing. It's down to them to ensure we're legally compliant from a food safety point of view. Our sites are super busy, ever-demanding and our standards are high - keeping our Technical team busy every day. Reporting to the Shift Technical Manager, you will: Monitor, control and audit the production process Ensure that conformity and non-conformity are communicated, followed up and closed off. Investigate any food safety incidents applying root cause analysis and ensure that the day to day site technical function is achieved Support the site management team during any external accreditation such as BRC and Morrisons manufacturing standards Ensure that the site production is supported during the launch of any new product line About You As well as a keen eye for detail you will also need: The confidence to challenge with a proactive and can do attitude To be a team player and an effective communicator Good PC skills (especially Google) Food experience in a technical or similar type role. A HACCP qualification or a food safety qualification (ideally) In return for your hard work we will offer you: Six weeks holiday (including bank holidays) and a guaranteed day off that's important to you - whether that be a birthday, religious holiday or a special occasion 15% discount in our supermarkets and convenience stores available from the day you join us Additional 10% discount card for a Friend or Family member Career progression and development opportunities Subsidised staff canteen Competitive pension and life assurance Healthcare/Well-being benefits including Aviva Digital GP Morrisons MyPerks with discounts at high street shops, cinemas and gyms, and lots more Optional Payroll charity donations A range of family friendly policies including 26 weeks maternity and adoption leave along with neonatal and fertility leave About The Company You ll find a great big welcome here at Myton Food Group - the part of our business that looks after manufacturing, whilst maintaining strong roots within Morrisons Supermarkets. At Myton Food Group, we have a legacy to be proud of. We re British farming s biggest single direct customer. We buy from highly valued suppliers. And we re passionate about the quality of our food. Today, we have 19 manufacturing sites across the UK, where we pack and process fresh meats and fish, savoury and sweet pies, fruit and veg, flower bouquets, bread and lots more. We really do stand out in the world of food manufacturing. But what we re especially proud of is the way we all get stuck in and work as a team, in partnership across our supply chain. Read more about what we do at our Myton Food Group website.
This is a high-profile, client-facing Customer Technical Manager role with a fast-growing, award-winning manufacturing business supplying major UK retailers. This is a brand-newly created role due to continued business growth. You ll work alongside the existing Quality Management team, adding dedicated customer-facing technical support and strengthening the link between internal quality, compliance and customer expectations. The Role As Customer Technical Manager, you will: Act as a primary technical and quality contact for customers and retailers Work directly with customer technical and quality teams Support BRCGS and customer audits Oversee quality control processes and testing programmes Lead non-conformance investigations, root cause analysis and CAPA Maintain and develop the QMS Help improve quality standards, compliance, KPIs and customer confidence What We re Looking For You ll suit this role if you have experience as a: Customer Technical Manager Technical Manager Quality Manager QA Manager Quality Assurance Manager Technical Quality Manager You ll also bring: Experience in food, nutraceutical, pharma or regulated manufacturing Exposure to BRCGS audits and retailer standards Confidence dealing directly with customer technical teams Strong knowledge of HACCP, GMP, QMS, food safety and compliance A practical, improvement-focused approach to quality management Why Apply? Brand-newly created Customer Technical Manager role High-profile, client-facing position Work directly with major retailers and customer technical teams Join a growing, investment-led manufacturing business Work alongside an established Quality Management team Real opportunity to influence audit performance, compliance and standards Apply If you re ready to step into a more senior, customer-facing technical quality role where you can influence audit performance, customer confidence and quality standards, apply now.
May 15, 2026
Full time
This is a high-profile, client-facing Customer Technical Manager role with a fast-growing, award-winning manufacturing business supplying major UK retailers. This is a brand-newly created role due to continued business growth. You ll work alongside the existing Quality Management team, adding dedicated customer-facing technical support and strengthening the link between internal quality, compliance and customer expectations. The Role As Customer Technical Manager, you will: Act as a primary technical and quality contact for customers and retailers Work directly with customer technical and quality teams Support BRCGS and customer audits Oversee quality control processes and testing programmes Lead non-conformance investigations, root cause analysis and CAPA Maintain and develop the QMS Help improve quality standards, compliance, KPIs and customer confidence What We re Looking For You ll suit this role if you have experience as a: Customer Technical Manager Technical Manager Quality Manager QA Manager Quality Assurance Manager Technical Quality Manager You ll also bring: Experience in food, nutraceutical, pharma or regulated manufacturing Exposure to BRCGS audits and retailer standards Confidence dealing directly with customer technical teams Strong knowledge of HACCP, GMP, QMS, food safety and compliance A practical, improvement-focused approach to quality management Why Apply? Brand-newly created Customer Technical Manager role High-profile, client-facing position Work directly with major retailers and customer technical teams Join a growing, investment-led manufacturing business Work alongside an established Quality Management team Real opportunity to influence audit performance, compliance and standards Apply If you re ready to step into a more senior, customer-facing technical quality role where you can influence audit performance, customer confidence and quality standards, apply now.
Business Development Manager, Inspection Equipment Location: Ideally within 1-2 hours of the West Midlands Salary: 50,000- 60,000 + package Role Type: Field-based, new business development We are recruiting for a Business Development Manager to join a specialist manufacturer of high-end inspection and quality assurance equipment supplied into FMCG and pharmaceutical production environments. This is a pure business development role focused on generating new business across the UK, targeting manufacturers operating high-speed filling, packaging and production lines. The successful candidate will be selling technical inspection solutions used to improve product quality, safety, compliance and production efficiency. The Role Generate new business opportunities across FMCG, food, beverage and pharmaceutical manufacturing Sell technical inspection, detection or quality control equipment into production and packaging environments Build relationships with engineering, production, quality and senior management stakeholders Identify customer requirements and work closely with technical teams to develop tailored solutions Manage the full sales cycle from prospecting and site visits through to proposal, negotiation and close Represent a premium technology-led business with a strong reputation in automated inspection and line quality assurance The Candidate Proven business development experience selling inspection equipment, detection systems, QA equipment or related automation into FMCG or pharmaceutical environments Strong understanding of production lines, packaging lines or high-speed manufacturing processes Comfortable winning new business rather than managing an existing account base Able to engage technically with engineering, production and quality teams Based within 1-2 hours of the West Midlands, with flexibility to travel nationally Self-motivated, commercially driven and confident opening doors with new customers Package 50,000- 60,000 basic salary Company car or car allowance Pension and benefits Field-based role with national coverage This is an excellent opportunity for a commercially driven technical sales professional to join a specialist inspection equipment business and take ownership of new business growth across the UK. WR Engineering are the recruitment partner for engineering, manufacturing & technical sales jobs. We recruit for permanent jobs UK wide. WR is acting as an Employment Agency in relation to this vacancy.
May 15, 2026
Full time
Business Development Manager, Inspection Equipment Location: Ideally within 1-2 hours of the West Midlands Salary: 50,000- 60,000 + package Role Type: Field-based, new business development We are recruiting for a Business Development Manager to join a specialist manufacturer of high-end inspection and quality assurance equipment supplied into FMCG and pharmaceutical production environments. This is a pure business development role focused on generating new business across the UK, targeting manufacturers operating high-speed filling, packaging and production lines. The successful candidate will be selling technical inspection solutions used to improve product quality, safety, compliance and production efficiency. The Role Generate new business opportunities across FMCG, food, beverage and pharmaceutical manufacturing Sell technical inspection, detection or quality control equipment into production and packaging environments Build relationships with engineering, production, quality and senior management stakeholders Identify customer requirements and work closely with technical teams to develop tailored solutions Manage the full sales cycle from prospecting and site visits through to proposal, negotiation and close Represent a premium technology-led business with a strong reputation in automated inspection and line quality assurance The Candidate Proven business development experience selling inspection equipment, detection systems, QA equipment or related automation into FMCG or pharmaceutical environments Strong understanding of production lines, packaging lines or high-speed manufacturing processes Comfortable winning new business rather than managing an existing account base Able to engage technically with engineering, production and quality teams Based within 1-2 hours of the West Midlands, with flexibility to travel nationally Self-motivated, commercially driven and confident opening doors with new customers Package 50,000- 60,000 basic salary Company car or car allowance Pension and benefits Field-based role with national coverage This is an excellent opportunity for a commercially driven technical sales professional to join a specialist inspection equipment business and take ownership of new business growth across the UK. WR Engineering are the recruitment partner for engineering, manufacturing & technical sales jobs. We recruit for permanent jobs UK wide. WR is acting as an Employment Agency in relation to this vacancy.
