About the Role We are seeking an experienced Agricultural Mechanic with a proven track record in the preparation of agricultural machinery for phytosanitary certification and international export. The successful candidate will combine strong mechanical ability with a thorough understanding of phytosanitary regulations, biosecurity protocols, and the standards required to ensure machinery is certified clean and pest-free for shipment across international borders. Key Responsibilities • Carry out thorough mechanical inspections, servicing, and repairs on a wide range of agricultural machinery including tractors, combines, cultivators, drills, and sprayers • Prepare machinery to phytosanitary standards by performing deep cleaning, steam washing, decontamination, and removal of all soil, plant material, seeds, and biological contaminants • Inspect machinery post-clean to ensure it meets the requirements for phytosanitary certification, documenting the process with photographs and written records as required • Liaise with APHA (Animal and Plant Health Agency) inspectors or equivalent bodies to facilitate inspections and obtain phytosanitary certificates for export consignments • Disassemble and reassemble machine components where necessary to access hard-to-reach areas for cleaning and inspection (e.g., undercarriages, auger housings, seed metering units) • Carry out pre-export mechanical preparation including fluid changes, safety checks, transport securing, and cosmetic presentation • Maintain detailed records of all preparation work, including cleaning logs, inspection checklists, and certification paperwork • Diagnose and repair mechanical, hydraulic, and basic electrical faults across a range of farm equipment • Coordinate with the logistics and sales teams on export timelines and machinery readiness • Ensure all work complies with health and safety regulations and environmental standards for wash-down and waste disposal Skills & Requirements • Proven experience as an agricultural mechanic, ideally within a dealership, export, or contracting environment • Hands-on experience preparing machinery for phytosanitary inspection and international export• Strong understanding of ISPM 15, phytosanitary regulations, and biosecurity requirements for used machinery exports • City & Guilds / NVQ Level 2 or 3 in Agricultural or Land-Based Engineering (or equivalent) • Good working knowledge of hydraulic systems, transmissions, and engine diagnostics • Meticulous attention to detail the ability to ensure every component is free from contaminants • Ability to read and interpret technical manuals, parts diagrams, and service bulletins • Full UK driving licence (essential) • Strong organisational skills with the ability to manage multiple machines to tight export deadlines • Professional and reliable with excellent communication skills Desirable • Experience with APHA inspection processes and export documentation • Forklift or telehandler licence • Welding and fabrication skills (MIG/TIG) • PA1/PA2 spraying certificates • Experience with specific manufacturer brands (e.g., John Deere, Case IH, New Holland, Fendt, CLAAS) • Knowledge of international shipping and container loading procedures for machinery What's on Offer • Competitive salary dependent on experience • Ongoing training and professional development • Pension scheme and holiday entitlement • Opportunity to work on a diverse range of machinery destined for markets worldwide • Supportive team environment with genuine career progression How to Apply For a confidential discussion or to apply, please contact Sam at (url removed). We truly value each and every candidate and are committed to finding the right opportunity for you.
May 01, 2026
Full time
About the Role We are seeking an experienced Agricultural Mechanic with a proven track record in the preparation of agricultural machinery for phytosanitary certification and international export. The successful candidate will combine strong mechanical ability with a thorough understanding of phytosanitary regulations, biosecurity protocols, and the standards required to ensure machinery is certified clean and pest-free for shipment across international borders. Key Responsibilities • Carry out thorough mechanical inspections, servicing, and repairs on a wide range of agricultural machinery including tractors, combines, cultivators, drills, and sprayers • Prepare machinery to phytosanitary standards by performing deep cleaning, steam washing, decontamination, and removal of all soil, plant material, seeds, and biological contaminants • Inspect machinery post-clean to ensure it meets the requirements for phytosanitary certification, documenting the process with photographs and written records as required • Liaise with APHA (Animal and Plant Health Agency) inspectors or equivalent bodies to facilitate inspections and obtain phytosanitary certificates for export consignments • Disassemble and reassemble machine components where necessary to access hard-to-reach areas for cleaning and inspection (e.g., undercarriages, auger housings, seed metering units) • Carry out pre-export mechanical preparation including fluid changes, safety checks, transport securing, and cosmetic presentation • Maintain detailed records of all preparation work, including cleaning logs, inspection checklists, and certification paperwork • Diagnose and repair mechanical, hydraulic, and basic electrical faults across a range of farm equipment • Coordinate with the logistics and sales teams on export timelines and machinery readiness • Ensure all work complies with health and safety regulations and environmental standards for wash-down and waste disposal Skills & Requirements • Proven experience as an agricultural mechanic, ideally within a dealership, export, or contracting environment • Hands-on experience preparing machinery for phytosanitary inspection and international export• Strong understanding of ISPM 15, phytosanitary regulations, and biosecurity requirements for used machinery exports • City & Guilds / NVQ Level 2 or 3 in Agricultural or Land-Based Engineering (or equivalent) • Good working knowledge of hydraulic systems, transmissions, and engine diagnostics • Meticulous attention to detail the ability to ensure every component is free from contaminants • Ability to read and interpret technical manuals, parts diagrams, and service bulletins • Full UK driving licence (essential) • Strong organisational skills with the ability to manage multiple machines to tight export deadlines • Professional and reliable with excellent communication skills Desirable • Experience with APHA inspection processes and export documentation • Forklift or telehandler licence • Welding and fabrication skills (MIG/TIG) • PA1/PA2 spraying certificates • Experience with specific manufacturer brands (e.g., John Deere, Case IH, New Holland, Fendt, CLAAS) • Knowledge of international shipping and container loading procedures for machinery What's on Offer • Competitive salary dependent on experience • Ongoing training and professional development • Pension scheme and holiday entitlement • Opportunity to work on a diverse range of machinery destined for markets worldwide • Supportive team environment with genuine career progression How to Apply For a confidential discussion or to apply, please contact Sam at (url removed). We truly value each and every candidate and are committed to finding the right opportunity for you.
Team Manager Data Intelligence and Analytics - SEO Closing date: 18/05/2026, 16:00 Advertising basis: Permanent Actual starting salary: £47,675 Salary range or pay band: £47,675 to £56,445 Work pattern: Full time (applications are welcome from people who work part time, as part of a job share or who work full time) Directorate: Care Inspectorate Wales Location: Pan Wales - The role can be based in one of the Care Inspectorate Wales (CIW) main offices these are Merthyr, Carmarthen or Llandudno Junction. 'Pan Wales' means the post holder can be based in any Welsh Government office, subject to business needs. Roles based outside Wales, including London, are not available unless explicitly stated in the advert. Purpose of post: CIW is the independent regulator of social care and childcare. CIW registers, inspects and takes action to improve the quality and safety of services for the well-being of the people of Wales. The post holder will report to the Senior Manager Project, Data and ICT Services and will shape and oversee the management of data collection, analysis and performance management on behalf of CIW. This role will involve working with colleagues to identify their information requirements, developing information solutions and engagement with internal and external stakeholders on the collection and use of information across the organisation. CIW is an intelligence-led organisation and this role is key to enabling this. Welsh language skills are not essential for this post, they are however desirable and will be considered if two or more candidates receive the same score at the application or interview stage. Key tasks: Work with the Senior Manager to develop a strategy to shape and deliver a data service enabling the organisation to be truly intelligence-led. Work with colleagues across CIW to identify their information requirements and lead on the development of appropriate solutions, including reports and self-service data tools. Advance the use of data analysis techniques to produce analysis and predictive models, providing greater insight from the data. Build and maintain networks with the providers of social care and childcare related knowledge for Wales, ensuring CIW is aware of data sources and CIW's information needs are represented. Direct line management of 5 x HEOs and 1 x EO. Responsible for planning the work of the team, ensuring it follows the overall business objectives of CIW and implementing appropriate performance management arrangements to underpin and evidence delivery. Management of data collection, data dissemination, analysis and presentation of data. Lead on the production of regular and ad-hoc performance reports to the Executive Leadership Team. Lead on the development of an annual plan of work to ensure adequate coverage for the audit and review of the CRM system to ensure that data integrity is achieved and maintained. Contribute to Digital Development including leading on the information and reporting requirements. Managing own professional development and seeking appropriate opportunities in discussion with the Senior Manager, Project, Data & ICT Services. Rheolwr Tîm, Deallusrwydd Data a Dadansoddeg - Uwch-swyddog Gweithredol Dyddiad cau: 18/05/2026, 16:00 Sail hysbysebu: Parhaol Union gyflog cychwynnol: £47,675 Ystod cyflog neu fand cyflog: Uwch Swyddog Gweithredol £47,675 i £56,445 Patrwm Gwaith: Llawn amser (croesewir ceisiadau gan bobl sy'n gweithio rhan-amser, fel rhan o rannu swydd neu sy'n gweithio'n llawn amser) Cyfarwyddiaeth: Arolygiaeth Gofal Cymru Lleoliad: Ledled Cymru - Gall y rôl gael ei lleoli yn un o brif swyddfeydd Arolygiaeth Gofal Cymru (AGC) ym Merthyr Tudful, Caerfyrddin neu Gyffordd Llandudno Ystyr 'Cymru Gyfan' yw y gall deiliad y swydd fod wedi'i leoli mewn unrhyw swyddfa Llywodraeth Cymru, gan ddibynnu ar anghenion y busnes. Nid yw rolau sydd wedi'u lleoli y tu allan i Gymru, gan gynnwys Llundain, ar gael oni bai eu bod wedi'u nodi'n benodol yn yr hysbyseb. Pwrpas y swydd: AGC yw rheoleiddiwr annibynnol gofal cymdeithasol a gofal plant. Mae AGC yn cofrestru, yn arolygu ac yn gweithredu i wella ansawdd a diogelwch gwasanaethau er lles pobl Cymru. Bydd deiliad y swydd yn adrodd i'r Uwch-reolwr Prosiect, Data a Gwasanaethau TGCh, a bydd yn llywio'r broses o gasglu data, dadansoddi a rheoli perfformiad ac yn ei goruchwylio ar ran AGC. Bydd y rôl hon yn cynnwys gweithio gyda chydweithwyr i nodi eu gofynion o ran gwybodaeth, datblygu datrysiadau gwybodaeth ac ymgysylltu â rhanddeiliaid mewnol ac allanol ynghylch y broses o gasglu a defnyddio gwybodaeth ym mhob rhan o'r sefydliad. Mae AGC yn sefydliad a arweinir gan ddeallusrwydd ac mae'r rôl hon yn allweddol i alluogi hyn. Tasgau Allweddol: Gweithio gyda'r Uwch-reolwr i ddatblygu strategaeth i lywio a darparu gwasanaeth data sy'n galluogi'r sefydliad i sicrhau ei fod yn cael ei arwain gan ddeallusrwydd. Gweithio gyda chydweithwyr ym mhob rhan o AGC i nodi eu gofynion o ran gwybodaeth ac arwain y gwaith o ddatblygu datrysiadau priodol, gan gynnwys adroddiadau ac offer data hunanwasanaeth. Datblygu'r defnydd o dechnegau dadansoddi data i lunio modelau dadansoddi a rhagweld, gan ddarparu deallusrwydd gwell o'r data. Meithrin a chynnal rhwydweithiau â darparwyr gwybodaeth sy'n gysylltiedig â gofal cymdeithasol a gofal plant yng Nghymru, gan sicrhau bod AGC yn ymwybodol o ffynonellau data a bod anghenion AGC o ran gwybodaeth yn cael eu cynrychioli. Bod yn rheolwr llinell uniongyrchol ar bum Swyddog Gweithredol Uwch ac un Swyddog Gweithredol. Bod yn gyfrifol am gynllunio gwaith y tîm, gan sicrhau ei fod yn dilyn amcanion busnes cyffredinol AGC, a rhoi trefniadau rheoli perfformiad priodol ar waith i ategu a dangos y gwasanaeth a ddarperir. Rheoli'r broses o gasglu data, dosbarthu data, dadansoddi a chyflwyno data. Arwain y gwaith o lunio adroddiadau rheolaidd ac ad-hoc ar berfformiad i'r Tîm Arwain Gweithredol. Arwain y broses o ddatblygu cynllun gwaith blynyddol i sicrhau cwmpas digonol ar gyfer y gwaith o archwilio ac adolygu system CRM er mwyn sicrhau a chynnal cywirdeb data. Cyfrannu at Ddatblygiad Digidol, gan gynnwys arwain y gofynion o ran gwybodaeth ac adrodd. Rheoli eich datblygiad proffesiynol eich hun a cheisio cyfleoedd priodol drwy drafod â'r Uwch-reolwr, Prosiect, Data a Gwasanaethau TGCh.
Apr 30, 2026
Full time
Team Manager Data Intelligence and Analytics - SEO Closing date: 18/05/2026, 16:00 Advertising basis: Permanent Actual starting salary: £47,675 Salary range or pay band: £47,675 to £56,445 Work pattern: Full time (applications are welcome from people who work part time, as part of a job share or who work full time) Directorate: Care Inspectorate Wales Location: Pan Wales - The role can be based in one of the Care Inspectorate Wales (CIW) main offices these are Merthyr, Carmarthen or Llandudno Junction. 'Pan Wales' means the post holder can be based in any Welsh Government office, subject to business needs. Roles based outside Wales, including London, are not available unless explicitly stated in the advert. Purpose of post: CIW is the independent regulator of social care and childcare. CIW registers, inspects and takes action to improve the quality and safety of services for the well-being of the people of Wales. The post holder will report to the Senior Manager Project, Data and ICT Services and will shape and oversee the management of data collection, analysis and performance management on behalf of CIW. This role will involve working with colleagues to identify their information requirements, developing information solutions and engagement with internal and external stakeholders on the collection and use of information across the organisation. CIW is an intelligence-led organisation and this role is key to enabling this. Welsh language skills are not essential for this post, they are however desirable and will be considered if two or more candidates receive the same score at the application or interview stage. Key tasks: Work with the Senior Manager to develop a strategy to shape and deliver a data service enabling the organisation to be truly intelligence-led. Work with colleagues across CIW to identify their information requirements and lead on the development of appropriate solutions, including reports and self-service data tools. Advance the use of data analysis techniques to produce analysis and predictive models, providing greater insight from the data. Build and maintain networks with the providers of social care and childcare related knowledge for Wales, ensuring CIW is aware of data sources and CIW's information needs are represented. Direct line management of 5 x HEOs and 1 x EO. Responsible for planning the work of the team, ensuring it follows the overall business objectives of CIW and implementing appropriate performance management arrangements to underpin and evidence delivery. Management of data collection, data dissemination, analysis and presentation of data. Lead on the production of regular and ad-hoc performance reports to the Executive Leadership Team. Lead on the development of an annual plan of work to ensure adequate coverage for the audit and review of the CRM system to ensure that data integrity is achieved and maintained. Contribute to Digital Development including leading on the information and reporting requirements. Managing own professional development and seeking appropriate opportunities in discussion with the Senior Manager, Project, Data & ICT Services. Rheolwr Tîm, Deallusrwydd Data a Dadansoddeg - Uwch-swyddog Gweithredol Dyddiad cau: 18/05/2026, 16:00 Sail hysbysebu: Parhaol Union gyflog cychwynnol: £47,675 Ystod cyflog neu fand cyflog: Uwch Swyddog Gweithredol £47,675 i £56,445 Patrwm Gwaith: Llawn amser (croesewir ceisiadau gan bobl sy'n gweithio rhan-amser, fel rhan o rannu swydd neu sy'n gweithio'n llawn amser) Cyfarwyddiaeth: Arolygiaeth Gofal Cymru Lleoliad: Ledled Cymru - Gall y rôl gael ei lleoli yn un o brif swyddfeydd Arolygiaeth Gofal Cymru (AGC) ym Merthyr Tudful, Caerfyrddin neu Gyffordd Llandudno Ystyr 'Cymru Gyfan' yw y gall deiliad y swydd fod wedi'i leoli mewn unrhyw swyddfa Llywodraeth Cymru, gan ddibynnu ar anghenion y busnes. Nid yw rolau sydd wedi'u lleoli y tu allan i Gymru, gan gynnwys Llundain, ar gael oni bai eu bod wedi'u nodi'n benodol yn yr hysbyseb. Pwrpas y swydd: AGC yw rheoleiddiwr annibynnol gofal cymdeithasol a gofal plant. Mae AGC yn cofrestru, yn arolygu ac yn gweithredu i wella ansawdd a diogelwch gwasanaethau er lles pobl Cymru. Bydd deiliad y swydd yn adrodd i'r Uwch-reolwr Prosiect, Data a Gwasanaethau TGCh, a bydd yn llywio'r broses o gasglu data, dadansoddi a rheoli perfformiad ac yn ei goruchwylio ar ran AGC. Bydd y rôl hon yn cynnwys gweithio gyda chydweithwyr i nodi eu gofynion o ran gwybodaeth, datblygu datrysiadau gwybodaeth ac ymgysylltu â rhanddeiliaid mewnol ac allanol ynghylch y broses o gasglu a defnyddio gwybodaeth ym mhob rhan o'r sefydliad. Mae AGC yn sefydliad a arweinir gan ddeallusrwydd ac mae'r rôl hon yn allweddol i alluogi hyn. Tasgau Allweddol: Gweithio gyda'r Uwch-reolwr i ddatblygu strategaeth i lywio a darparu gwasanaeth data sy'n galluogi'r sefydliad i sicrhau ei fod yn cael ei arwain gan ddeallusrwydd. Gweithio gyda chydweithwyr ym mhob rhan o AGC i nodi eu gofynion o ran gwybodaeth ac arwain y gwaith o ddatblygu datrysiadau priodol, gan gynnwys adroddiadau ac offer data hunanwasanaeth. Datblygu'r defnydd o dechnegau dadansoddi data i lunio modelau dadansoddi a rhagweld, gan ddarparu deallusrwydd gwell o'r data. Meithrin a chynnal rhwydweithiau â darparwyr gwybodaeth sy'n gysylltiedig â gofal cymdeithasol a gofal plant yng Nghymru, gan sicrhau bod AGC yn ymwybodol o ffynonellau data a bod anghenion AGC o ran gwybodaeth yn cael eu cynrychioli. Bod yn rheolwr llinell uniongyrchol ar bum Swyddog Gweithredol Uwch ac un Swyddog Gweithredol. Bod yn gyfrifol am gynllunio gwaith y tîm, gan sicrhau ei fod yn dilyn amcanion busnes cyffredinol AGC, a rhoi trefniadau rheoli perfformiad priodol ar waith i ategu a dangos y gwasanaeth a ddarperir. Rheoli'r broses o gasglu data, dosbarthu data, dadansoddi a chyflwyno data. Arwain y gwaith o lunio adroddiadau rheolaidd ac ad-hoc ar berfformiad i'r Tîm Arwain Gweithredol. Arwain y broses o ddatblygu cynllun gwaith blynyddol i sicrhau cwmpas digonol ar gyfer y gwaith o archwilio ac adolygu system CRM er mwyn sicrhau a chynnal cywirdeb data. Cyfrannu at Ddatblygiad Digidol, gan gynnwys arwain y gofynion o ran gwybodaeth ac adrodd. Rheoli eich datblygiad proffesiynol eich hun a cheisio cyfleoedd priodol drwy drafod â'r Uwch-reolwr, Prosiect, Data a Gwasanaethau TGCh.
Quality Inspector/Trainee We are now recruiting for a Trainee Quality Inspector. The main purpose of the role is to verify components are correct against specifications and drawings. You will be trained on how to conduct difficult inspections on components using detailed drawings, with complex datum points. You will be trained to measure components at CNC machines or as presented "First Offs" using a variety of metrology equipment including the use of Faro Arms and Coordinate Measuring Machines (CMM). The main requirements of your role will be: You will need to maintain accurate records of each inspection, in line with our current filing systems, allowing easy retrieval as required. You will be trained in using a large variety of handheld inspection equipment, that is used on various types of testing and inspection, where you will become skilled and confident in using. You will be required to complete "Product Identification Form" (PIF) with the details of the non-conformance and communicate this to the relevant Team leaders. Test and validate components and assemblies using a variety of test equipment. Essential Skills and Experience The essential skills/experience required for this role are: You should be able to read drawings to an intermediate level, including geometric tolerancing (Training will be given). Have some experience of working with tight tolerances. Have some experience using handheld inspection equipment (Micromotors, Verniers, GO-NOGO Thread and Plug gauges). Able to work from documented instructions. Have a good understanding of the various finishing, sub-con process used in engineering parts. Good attention to detail. Able to communicate at all levels. Have good Microsoft Office skills, Excel, Word. Able to pick-up and use ERP systems. Desirable Skills and Experience The skills and experience we would like the employee in this role to have are: Some work experience within CNC machine shops or similar manufacturing engineering environment and possess a good understanding of Quality and Process management tools. Examples SPC, AQL. R&Rs, Calibration. Some experience of using CMM or Faro Arm devices and proficient with a range of handheld metrology equipment typically used in machine shop environments. Able to read and understand technical drawings and engineering specifications. Knowledge or experience of welding and fabrication processes would be beneficial. Previous experience of working in the vacuum industry would be advantageous. Qualifications Required Qualifications: Qualified to ONC/HNC level in Mechanical Engineering or Manufacturing or relevant Quality professional qualification. Desired Qualifications: Degree qualified Mechanical Engineer. Personal Qualities/Attributes Positive attitude to modern Quality practices and manufacturing processes. Must have good communication skills. A willingness to develop and take opportunities to learn and progress within the Company. Please note: As part of your normal duties you may be required to travel to and work at client premises or other locations as reasonably necessary for the proper performance of your duties. While your normal place of work will be Lower Dicker, you agree to undertake such travel as is reasonably required by the Company. The Company will provide reasonable notice of such requirements and will reimburse authorised travel expenses.
Apr 30, 2026
Full time
Quality Inspector/Trainee We are now recruiting for a Trainee Quality Inspector. The main purpose of the role is to verify components are correct against specifications and drawings. You will be trained on how to conduct difficult inspections on components using detailed drawings, with complex datum points. You will be trained to measure components at CNC machines or as presented "First Offs" using a variety of metrology equipment including the use of Faro Arms and Coordinate Measuring Machines (CMM). The main requirements of your role will be: You will need to maintain accurate records of each inspection, in line with our current filing systems, allowing easy retrieval as required. You will be trained in using a large variety of handheld inspection equipment, that is used on various types of testing and inspection, where you will become skilled and confident in using. You will be required to complete "Product Identification Form" (PIF) with the details of the non-conformance and communicate this to the relevant Team leaders. Test and validate components and assemblies using a variety of test equipment. Essential Skills and Experience The essential skills/experience required for this role are: You should be able to read drawings to an intermediate level, including geometric tolerancing (Training will be given). Have some experience of working with tight tolerances. Have some experience using handheld inspection equipment (Micromotors, Verniers, GO-NOGO Thread and Plug gauges). Able to work from documented instructions. Have a good understanding of the various finishing, sub-con process used in engineering parts. Good attention to detail. Able to communicate at all levels. Have good Microsoft Office skills, Excel, Word. Able to pick-up and use ERP systems. Desirable Skills and Experience The skills and experience we would like the employee in this role to have are: Some work experience within CNC machine shops or similar manufacturing engineering environment and possess a good understanding of Quality and Process management tools. Examples SPC, AQL. R&Rs, Calibration. Some experience of using CMM or Faro Arm devices and proficient with a range of handheld metrology equipment typically used in machine shop environments. Able to read and understand technical drawings and engineering specifications. Knowledge or experience of welding and fabrication processes would be beneficial. Previous experience of working in the vacuum industry would be advantageous. Qualifications Required Qualifications: Qualified to ONC/HNC level in Mechanical Engineering or Manufacturing or relevant Quality professional qualification. Desired Qualifications: Degree qualified Mechanical Engineer. Personal Qualities/Attributes Positive attitude to modern Quality practices and manufacturing processes. Must have good communication skills. A willingness to develop and take opportunities to learn and progress within the Company. Please note: As part of your normal duties you may be required to travel to and work at client premises or other locations as reasonably necessary for the proper performance of your duties. While your normal place of work will be Lower Dicker, you agree to undertake such travel as is reasonably required by the Company. The Company will provide reasonable notice of such requirements and will reimburse authorised travel expenses.
Welding Inspector (CSWIP 3.1 / 3.2) Glasgow Permanent Days Circa 37k We are working with an established engineering business to recruit a Welding Inspector to support quality control across fabrication, welding and assembly activities. This is a hands-on role where you will be responsible for ensuring products meet required specifications, codes and standards. You will be involved from pre-weld setup through to final inspection. Key Responsibilities Carry out visual inspection of welds (pre, in-process and final) Verify fabricated and assembled products against drawings and specifications Monitor weld consumables and compliance with WPS/PQR Conduct weld surveillance and maintain inspection records Produce weld maps where required Perform dimensional inspection on final assemblies Support welder qualification testing Work closely with internal teams to resolve quality issues Ensure compliance with ISO, ASME and relevant standards What You'll Need CSWIP 3.1 or 3.2 certification (essential) Background in fabrication, welding and assembly Knowledge of NDT processes and acceptance criteria Familiarity with ISO 9001 / ASME standards Strong attention to detail and ability to work independently What's on Offer Competitive salary Bonus 33 days holiday Pension & life cover Ongoing development opportunities You must have the right to work in the UK and be able to obtain security clearance.
Apr 28, 2026
Full time
Welding Inspector (CSWIP 3.1 / 3.2) Glasgow Permanent Days Circa 37k We are working with an established engineering business to recruit a Welding Inspector to support quality control across fabrication, welding and assembly activities. This is a hands-on role where you will be responsible for ensuring products meet required specifications, codes and standards. You will be involved from pre-weld setup through to final inspection. Key Responsibilities Carry out visual inspection of welds (pre, in-process and final) Verify fabricated and assembled products against drawings and specifications Monitor weld consumables and compliance with WPS/PQR Conduct weld surveillance and maintain inspection records Produce weld maps where required Perform dimensional inspection on final assemblies Support welder qualification testing Work closely with internal teams to resolve quality issues Ensure compliance with ISO, ASME and relevant standards What You'll Need CSWIP 3.1 or 3.2 certification (essential) Background in fabrication, welding and assembly Knowledge of NDT processes and acceptance criteria Familiarity with ISO 9001 / ASME standards Strong attention to detail and ability to work independently What's on Offer Competitive salary Bonus 33 days holiday Pension & life cover Ongoing development opportunities You must have the right to work in the UK and be able to obtain security clearance.
Your new company A well established fabrication and engineering facility with over 40 years of expertise in laser cutting, welding, and heavy fabrication. It operates from a modern large manufacturing space and employs around 110 skilled team members, known for delivering high quality, precision engineered components. The Role As a Quality Controller, you will play a key role in inspecting chassis, fabricated parts, and associated equipment. You'll support quality checks, audits, and process improvements while ensuring all products meet strict quality and safety standards.39 Hour Week. Monday - Thursday 7:00am - 3:45pm, Friday 7:00am - 1:00pm What You'll Do Address and raise quality concerns on a daily basis Carry out PDI inspections using 3D model software and complete associated reports Perform paint checks on chassis, horns, and power units Inspect internally fabricated parts and subassemblies before main build Complete PDI reports, participate in morning meetings, and maintain documentation Support the resolution of customer non-conformances (FRACAS) Maintain quality gates within designated areas Escalate non-conformances using the internal red tag process Contribute to quality investigations where required Conduct internal audits (5S, LSOP, etc.) Work collaboratively to support continuous improvement initiatives Ensure compliance with all Health & Safety regulations What You'll Bring Experience in a Quality or Inspection role Experience working within a Quality Management System Knowledge of measurement equipment (weld gauge, taper gauge, angle finder, etc.) Understanding of manufacturing processes and the weld process Basic computer skills Strong teamwork and communication abilities Good awareness of Health & Safety requirements Ability to produce clear handwritten reports Experience in continuous improvement (Desirable) Knowledge of cut/fold processes Why Join Us? Competitive rates of pay, Team Member bonus, Westfield healthcare, 33 holidays, pension, life assurance, LinkedIn Learning, on site free parking, and Perks discount card. You'll be part of a supportive and committed team that values quality, continuous improvement, and a collaborative work environment. This role offers variety, responsibility, and the opportunity to make a real impact on product quality. What you need to do now If you're interested in this role, click 'apply now' to forward an up-to-date copy of your CV, or call us now. If this job isn't quite right for you, but you are looking for a new position, please contact us for a confidential discussion about your career. Hays Specialist Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job you accept the T&C's, Privacy Policy and Disclaimers which can be found at hays.co.uk
Apr 27, 2026
Full time
Your new company A well established fabrication and engineering facility with over 40 years of expertise in laser cutting, welding, and heavy fabrication. It operates from a modern large manufacturing space and employs around 110 skilled team members, known for delivering high quality, precision engineered components. The Role As a Quality Controller, you will play a key role in inspecting chassis, fabricated parts, and associated equipment. You'll support quality checks, audits, and process improvements while ensuring all products meet strict quality and safety standards.39 Hour Week. Monday - Thursday 7:00am - 3:45pm, Friday 7:00am - 1:00pm What You'll Do Address and raise quality concerns on a daily basis Carry out PDI inspections using 3D model software and complete associated reports Perform paint checks on chassis, horns, and power units Inspect internally fabricated parts and subassemblies before main build Complete PDI reports, participate in morning meetings, and maintain documentation Support the resolution of customer non-conformances (FRACAS) Maintain quality gates within designated areas Escalate non-conformances using the internal red tag process Contribute to quality investigations where required Conduct internal audits (5S, LSOP, etc.) Work collaboratively to support continuous improvement initiatives Ensure compliance with all Health & Safety regulations What You'll Bring Experience in a Quality or Inspection role Experience working within a Quality Management System Knowledge of measurement equipment (weld gauge, taper gauge, angle finder, etc.) Understanding of manufacturing processes and the weld process Basic computer skills Strong teamwork and communication abilities Good awareness of Health & Safety requirements Ability to produce clear handwritten reports Experience in continuous improvement (Desirable) Knowledge of cut/fold processes Why Join Us? Competitive rates of pay, Team Member bonus, Westfield healthcare, 33 holidays, pension, life assurance, LinkedIn Learning, on site free parking, and Perks discount card. You'll be part of a supportive and committed team that values quality, continuous improvement, and a collaborative work environment. This role offers variety, responsibility, and the opportunity to make a real impact on product quality. What you need to do now If you're interested in this role, click 'apply now' to forward an up-to-date copy of your CV, or call us now. If this job isn't quite right for you, but you are looking for a new position, please contact us for a confidential discussion about your career. Hays Specialist Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job you accept the T&C's, Privacy Policy and Disclaimers which can be found at hays.co.uk
We are excited to offer a permanent opportunity for an accomplished Avonmouth Bridge Manager join our Specialist Bridges Inspection and Maintenance (SBIM) team in Bristol. The Avonmouth Bridge Manager oversees all technical, engineering, and operational aspects of the Avonmouth Bridge, ensuring its safety, resilience, and compliance with statutory and contractual standards. You'll lead inspections, maintenance, renewals, and enhancements, acting as the main point of contact for the Client's team. The Avonmouth Bridge is a crucial M5 crossing over the River Avon, a 1,388-metre steel box-girder structure carrying over 100,000 vehicles daily. As a vital gateway, it connects Bristol and the wider region, enduring heavy traffic and challenging conditions. As Bridge Manager, you'll steward this complex crossing, lead safe operations and targeted renewals, and proactively maintain its deck, welds, and access systems. Your leadership will keep the bridge resilient for road users, communities, and businesses alike. A central aspect of the role is to maximise value for money by driving operational efficiency and productivity. You'll coordinate workbanks, access, resources, and supply chains for smooth delivery and minimal disruption. The standard hours of work are 40 per week What You'll Do: Manage specialist bridge inspections, cyclic and reactive maintenance, and renewal schemes including design coordination and operational delivery. Ensure compliance and delivery of operations in accordance with CDM Regulations. Deliver maintenance solutions. Deliver incident response and instant repairs. Support delivery of renewal schemes including design, construction, and site supervision. Ensure compliance with ISO standards including ISO31000 (Risk Management), ISO22301 (Business Continuity), ISO9001 (Quality), and ISO14001 (Environmental). Maintain and manage Client's Stocks and Premises. Implement a management system that addresses the 'Purple book' and gantry O&M manuals for their respective bridge. Line management of an inspection and operations team. Provide technical leadership to a team of inspectors, Project Managers and delivery teams. Coordinate all work activities to maximise productivity, efficiency and value for money, ensuring seamless integration of inspections, maintenance, renewals and access operations. Why Join Us? At Amey, we don't just offer jobs, we offer opportunities to build fulfilling careers. As one of the top 1% of employers recognised by Investors in People, we are committed to your professional growth and wellbeing. Here's what you can expect when you join our team: Competitive Salary: Enjoy a competitive annual salary with the potential for yearly reviews to ensure you're rewarded for your contributions. Company Car / Car allowance Career Growth: Propel your career with clear, dynamic advancement opportunities to roles. Training Opportunities: Unlock your potential with comprehensive training tailored to your growth. Personal Development Opportunities: Advance your personal growth through mentorship and access to our award-winning programs like our Leadership Development, and Multicultural Leadership programs. Pension: Benefit from a generous pension scheme with company contributions for your future peace of mind. Holidays: Enjoy at least 24 days of holiday plus bank holidays, and the opportunity to buy further 5 days! Giving you plenty of time to relax and recharge. Flexible Benefits: Customise your benefits package with options like additional leave, cycle-to-work schemes, charitable giving, and gym memberships. Exclusive Discounts: Access our online portal filled with discounts from leading retailers, healthcare services, and more, helping you save on the things that matter. Social Impact: Take part in our community initiatives with 2x paid volunteering days a year, plus other opportunities to support fundraising and local projects. What You'll Bring: Essential Extensive technical expertise in large structures. Ability to manage complex portfolios, including inspections, design, and project delivery. Experience leading operational teams and projects from start to finish. Proven client relationship management with senior and sensitive stakeholders. Experience managing multiple projects and balancing tasks in live environments. Strong contract delivery experience, including NEC contracts, and understanding of programme, cost, risk, and safety. Ability to coordinate traffic, access, resources, and supply chain for safe and efficient works. Experience in high-risk, time-critical settings with rapid decision-making. Ability to integrate multiple workstreams and minimise disruption. Principal Contractor experience, with CDM and safe site operations knowledge. Leadership of multidisciplinary teams, ensuring compliance and safe delivery. Experience in contracting environments, with commercial awareness and risk mitigation. Understanding and delivery of commercial contracts, meeting business targets. Desirable Chartered Civil or Structural Engineer (MICE/MIStructE) or working towards chartership. NEC 4 Accredited Project Manager. Chartered APM, Prince 2, or equivalent qualification. Experience with remote monitoring systems (CCTV, WIM, wind monitoring, dehumidification). If you are passionate about engineering, thrive on technical challenges, and are ready to take a leading role in maintaining some of the UK's most significant bridges, we encourage you to apply. Application Guidance At Amey, we value a culture of diversity and inclusion. We encourage applications from individuals who are passionate about making a positive impact, no matter their background, gender, race, or personal circumstances. We believe everyone deserves the opportunity to shine. As a Disability Confident leader, we're proud to offer applicants with a disability an interview if they meet the minimum requirements for the role. If you have any questions or need any adjustments during the recruitment process, don't hesitate to reach out to Kayla Caruth, our recruiter for this role, at (url removed)
Apr 24, 2026
Full time
We are excited to offer a permanent opportunity for an accomplished Avonmouth Bridge Manager join our Specialist Bridges Inspection and Maintenance (SBIM) team in Bristol. The Avonmouth Bridge Manager oversees all technical, engineering, and operational aspects of the Avonmouth Bridge, ensuring its safety, resilience, and compliance with statutory and contractual standards. You'll lead inspections, maintenance, renewals, and enhancements, acting as the main point of contact for the Client's team. The Avonmouth Bridge is a crucial M5 crossing over the River Avon, a 1,388-metre steel box-girder structure carrying over 100,000 vehicles daily. As a vital gateway, it connects Bristol and the wider region, enduring heavy traffic and challenging conditions. As Bridge Manager, you'll steward this complex crossing, lead safe operations and targeted renewals, and proactively maintain its deck, welds, and access systems. Your leadership will keep the bridge resilient for road users, communities, and businesses alike. A central aspect of the role is to maximise value for money by driving operational efficiency and productivity. You'll coordinate workbanks, access, resources, and supply chains for smooth delivery and minimal disruption. The standard hours of work are 40 per week What You'll Do: Manage specialist bridge inspections, cyclic and reactive maintenance, and renewal schemes including design coordination and operational delivery. Ensure compliance and delivery of operations in accordance with CDM Regulations. Deliver maintenance solutions. Deliver incident response and instant repairs. Support delivery of renewal schemes including design, construction, and site supervision. Ensure compliance with ISO standards including ISO31000 (Risk Management), ISO22301 (Business Continuity), ISO9001 (Quality), and ISO14001 (Environmental). Maintain and manage Client's Stocks and Premises. Implement a management system that addresses the 'Purple book' and gantry O&M manuals for their respective bridge. Line management of an inspection and operations team. Provide technical leadership to a team of inspectors, Project Managers and delivery teams. Coordinate all work activities to maximise productivity, efficiency and value for money, ensuring seamless integration of inspections, maintenance, renewals and access operations. Why Join Us? At Amey, we don't just offer jobs, we offer opportunities to build fulfilling careers. As one of the top 1% of employers recognised by Investors in People, we are committed to your professional growth and wellbeing. Here's what you can expect when you join our team: Competitive Salary: Enjoy a competitive annual salary with the potential for yearly reviews to ensure you're rewarded for your contributions. Company Car / Car allowance Career Growth: Propel your career with clear, dynamic advancement opportunities to roles. Training Opportunities: Unlock your potential with comprehensive training tailored to your growth. Personal Development Opportunities: Advance your personal growth through mentorship and access to our award-winning programs like our Leadership Development, and Multicultural Leadership programs. Pension: Benefit from a generous pension scheme with company contributions for your future peace of mind. Holidays: Enjoy at least 24 days of holiday plus bank holidays, and the opportunity to buy further 5 days! Giving you plenty of time to relax and recharge. Flexible Benefits: Customise your benefits package with options like additional leave, cycle-to-work schemes, charitable giving, and gym memberships. Exclusive Discounts: Access our online portal filled with discounts from leading retailers, healthcare services, and more, helping you save on the things that matter. Social Impact: Take part in our community initiatives with 2x paid volunteering days a year, plus other opportunities to support fundraising and local projects. What You'll Bring: Essential Extensive technical expertise in large structures. Ability to manage complex portfolios, including inspections, design, and project delivery. Experience leading operational teams and projects from start to finish. Proven client relationship management with senior and sensitive stakeholders. Experience managing multiple projects and balancing tasks in live environments. Strong contract delivery experience, including NEC contracts, and understanding of programme, cost, risk, and safety. Ability to coordinate traffic, access, resources, and supply chain for safe and efficient works. Experience in high-risk, time-critical settings with rapid decision-making. Ability to integrate multiple workstreams and minimise disruption. Principal Contractor experience, with CDM and safe site operations knowledge. Leadership of multidisciplinary teams, ensuring compliance and safe delivery. Experience in contracting environments, with commercial awareness and risk mitigation. Understanding and delivery of commercial contracts, meeting business targets. Desirable Chartered Civil or Structural Engineer (MICE/MIStructE) or working towards chartership. NEC 4 Accredited Project Manager. Chartered APM, Prince 2, or equivalent qualification. Experience with remote monitoring systems (CCTV, WIM, wind monitoring, dehumidification). If you are passionate about engineering, thrive on technical challenges, and are ready to take a leading role in maintaining some of the UK's most significant bridges, we encourage you to apply. Application Guidance At Amey, we value a culture of diversity and inclusion. We encourage applications from individuals who are passionate about making a positive impact, no matter their background, gender, race, or personal circumstances. We believe everyone deserves the opportunity to shine. As a Disability Confident leader, we're proud to offer applicants with a disability an interview if they meet the minimum requirements for the role. If you have any questions or need any adjustments during the recruitment process, don't hesitate to reach out to Kayla Caruth, our recruiter for this role, at (url removed)
We are excited to offer a permanent opportunity for an accomplished Severn Bridge Manager join our Specialist Bridges Inspection and Maintenance (SBIM) team in Bristol. The Severn Bridge Manager is responsible for the management of all technical, engineering and operational aspects relating to the Severn Bridge. This includes ensuring operational and structural safety, resilience, and compliance with statutory and contractual obligations. The Bridge Manager leads the planning and delivery of inspections, maintenance, renewals, and enhancements, and acts as the primary interface with the Client's team. The Severn Bridge is a nationally significant, Grade I listed suspension structure that has connected England and Wales since 1966, embodying engineering innovation through its pioneering aerodynamic deck design and enduring resilience in a challenging estuarial environment. As Bridge Manager, you will take stewardship of an asset that helped set new global standards for long-span bridge design, ensuring it remains safe, reliable, and future-ready for the millions who depend on it. This role is an opportunity to lead with purpose - preserving a landmark of engineering excellence while delivering high-quality service, robust maintenance, and operational assurance for one of the UK's most iconic crossings. As Bridge Manager, you'll steward this complex crossing, lead safe operations and targeted renewals, and proactively maintain its deck, welds, and access systems. Your leadership will keep the bridge resilient for road users, communities, and businesses alike. A central aspect of the role is to maximise value for money by driving operational efficiency and productivity. You'll coordinate workbanks, access, resources, and supply chains for smooth delivery and minimal disruption. The standard hours of work are 40 per week What You'll Do: Manage specialist bridge inspections, cyclic and reactive maintenance, and renewal schemes including design coordination and operational delivery. Ensure compliance and delivery of operations in accordance with CDM Regulations. Deliver maintenance solutions. Deliver incident response and instant repairs. Support delivery of renewal schemes including design, construction, and site supervision. Ensure compliance with ISO standards including ISO31000 (Risk Management), ISO22301 (Business Continuity), ISO9001 (Quality), and ISO14001 (Environmental). Maintain and manage Client's Stocks and Premises. Implement a management system that addresses the 'Purple book' and gantry O&M manuals for their respective bridge. Line management of an inspection and operations team. Provide technical leadership to a team of inspectors, Project Managers and delivery teams. Coordinate all work activities to maximise productivity, efficiency and value for money, ensuring seamless integration of inspections, maintenance, renewals and access operations. Why Join Us? At Amey, we don't just offer jobs, we offer opportunities to build fulfilling careers. As one of the top 1% of employers recognised by Investors in People, we are committed to your professional growth and wellbeing. Here's what you can expect when you join our team: Competitive Salary: Enjoy a competitive annual salary with the potential for yearly reviews to ensure you're rewarded for your contributions. Company Car / Car allowance Career Growth: Propel your career with clear, dynamic advancement opportunities to roles. Training Opportunities: Unlock your potential with comprehensive training tailored to your growth. Personal Development Opportunities: Advance your personal growth through mentorship and access to our award-winning programs like our Leadership Development, and Multicultural Leadership programs. Pension: Benefit from a generous pension scheme with company contributions for your future peace of mind. Holidays: Enjoy at least 24 days of holiday plus bank holidays, and the opportunity to buy further 5 days! Giving you plenty of time to relax and recharge. Flexible Benefits: Customise your benefits package with options like additional leave, cycle-to-work schemes, charitable giving, and gym memberships. Exclusive Discounts: Access our online portal filled with discounts from leading retailers, healthcare services, and more, helping you save on the things that matter. Social Impact: Take part in our community initiatives with 2x paid volunteering days a year, plus other opportunities to support fundraising and local projects. What You'll Bring: Essential Extensive technical expertise in large structures. Ability to manage complex portfolios, including inspections, design, and project delivery. Experience leading operational teams and projects from start to finish. Proven client relationship management with senior and sensitive stakeholders. Experience managing multiple projects and balancing tasks in live environments. Strong contract delivery experience, including NEC contracts, and understanding of programme, cost, risk, and safety. Ability to coordinate traffic, access, resources, and supply chain for safe and efficient works. Experience in high-risk, time-critical settings with rapid decision-making. Ability to integrate multiple workstreams and minimise disruption. Principal Contractor experience, with CDM and safe site operations knowledge. Leadership of multidisciplinary teams, ensuring compliance and safe delivery. Experience in contracting environments, with commercial awareness and risk mitigation. Understanding and delivery of commercial contracts, meeting business targets. Desirable Chartered Civil or Structural Engineer (MICE/MIStructE) or working towards chartership. NEC 4 Accredited Project Manager. Chartered APM, Prince 2, or equivalent qualification. Experience with remote monitoring systems (CCTV, WIM, wind monitoring, dehumidification). If you are passionate about engineering, thrive on technical challenges, and are ready to take a leading role in maintaining some of the UK's most significant bridges, we encourage you to apply. Application Guidance At Amey, we value a culture of diversity and inclusion. We encourage applications from individuals who are passionate about making a positive impact, no matter their background, gender, race, or personal circumstances. We believe everyone deserves the opportunity to shine. As a Disability Confident leader, we're proud to offer applicants with a disability an interview if they meet the minimum requirements for the role. If you have any questions or need any adjustments during the recruitment process, don't hesitate to reach out to Kayla Caruth, our recruiter for this role, at (url removed)
Apr 24, 2026
Full time
We are excited to offer a permanent opportunity for an accomplished Severn Bridge Manager join our Specialist Bridges Inspection and Maintenance (SBIM) team in Bristol. The Severn Bridge Manager is responsible for the management of all technical, engineering and operational aspects relating to the Severn Bridge. This includes ensuring operational and structural safety, resilience, and compliance with statutory and contractual obligations. The Bridge Manager leads the planning and delivery of inspections, maintenance, renewals, and enhancements, and acts as the primary interface with the Client's team. The Severn Bridge is a nationally significant, Grade I listed suspension structure that has connected England and Wales since 1966, embodying engineering innovation through its pioneering aerodynamic deck design and enduring resilience in a challenging estuarial environment. As Bridge Manager, you will take stewardship of an asset that helped set new global standards for long-span bridge design, ensuring it remains safe, reliable, and future-ready for the millions who depend on it. This role is an opportunity to lead with purpose - preserving a landmark of engineering excellence while delivering high-quality service, robust maintenance, and operational assurance for one of the UK's most iconic crossings. As Bridge Manager, you'll steward this complex crossing, lead safe operations and targeted renewals, and proactively maintain its deck, welds, and access systems. Your leadership will keep the bridge resilient for road users, communities, and businesses alike. A central aspect of the role is to maximise value for money by driving operational efficiency and productivity. You'll coordinate workbanks, access, resources, and supply chains for smooth delivery and minimal disruption. The standard hours of work are 40 per week What You'll Do: Manage specialist bridge inspections, cyclic and reactive maintenance, and renewal schemes including design coordination and operational delivery. Ensure compliance and delivery of operations in accordance with CDM Regulations. Deliver maintenance solutions. Deliver incident response and instant repairs. Support delivery of renewal schemes including design, construction, and site supervision. Ensure compliance with ISO standards including ISO31000 (Risk Management), ISO22301 (Business Continuity), ISO9001 (Quality), and ISO14001 (Environmental). Maintain and manage Client's Stocks and Premises. Implement a management system that addresses the 'Purple book' and gantry O&M manuals for their respective bridge. Line management of an inspection and operations team. Provide technical leadership to a team of inspectors, Project Managers and delivery teams. Coordinate all work activities to maximise productivity, efficiency and value for money, ensuring seamless integration of inspections, maintenance, renewals and access operations. Why Join Us? At Amey, we don't just offer jobs, we offer opportunities to build fulfilling careers. As one of the top 1% of employers recognised by Investors in People, we are committed to your professional growth and wellbeing. Here's what you can expect when you join our team: Competitive Salary: Enjoy a competitive annual salary with the potential for yearly reviews to ensure you're rewarded for your contributions. Company Car / Car allowance Career Growth: Propel your career with clear, dynamic advancement opportunities to roles. Training Opportunities: Unlock your potential with comprehensive training tailored to your growth. Personal Development Opportunities: Advance your personal growth through mentorship and access to our award-winning programs like our Leadership Development, and Multicultural Leadership programs. Pension: Benefit from a generous pension scheme with company contributions for your future peace of mind. Holidays: Enjoy at least 24 days of holiday plus bank holidays, and the opportunity to buy further 5 days! Giving you plenty of time to relax and recharge. Flexible Benefits: Customise your benefits package with options like additional leave, cycle-to-work schemes, charitable giving, and gym memberships. Exclusive Discounts: Access our online portal filled with discounts from leading retailers, healthcare services, and more, helping you save on the things that matter. Social Impact: Take part in our community initiatives with 2x paid volunteering days a year, plus other opportunities to support fundraising and local projects. What You'll Bring: Essential Extensive technical expertise in large structures. Ability to manage complex portfolios, including inspections, design, and project delivery. Experience leading operational teams and projects from start to finish. Proven client relationship management with senior and sensitive stakeholders. Experience managing multiple projects and balancing tasks in live environments. Strong contract delivery experience, including NEC contracts, and understanding of programme, cost, risk, and safety. Ability to coordinate traffic, access, resources, and supply chain for safe and efficient works. Experience in high-risk, time-critical settings with rapid decision-making. Ability to integrate multiple workstreams and minimise disruption. Principal Contractor experience, with CDM and safe site operations knowledge. Leadership of multidisciplinary teams, ensuring compliance and safe delivery. Experience in contracting environments, with commercial awareness and risk mitigation. Understanding and delivery of commercial contracts, meeting business targets. Desirable Chartered Civil or Structural Engineer (MICE/MIStructE) or working towards chartership. NEC 4 Accredited Project Manager. Chartered APM, Prince 2, or equivalent qualification. Experience with remote monitoring systems (CCTV, WIM, wind monitoring, dehumidification). If you are passionate about engineering, thrive on technical challenges, and are ready to take a leading role in maintaining some of the UK's most significant bridges, we encourage you to apply. Application Guidance At Amey, we value a culture of diversity and inclusion. We encourage applications from individuals who are passionate about making a positive impact, no matter their background, gender, race, or personal circumstances. We believe everyone deserves the opportunity to shine. As a Disability Confident leader, we're proud to offer applicants with a disability an interview if they meet the minimum requirements for the role. If you have any questions or need any adjustments during the recruitment process, don't hesitate to reach out to Kayla Caruth, our recruiter for this role, at (url removed)
Quality Inspector Precision Engineering Location: Lower Dicker, UK Salary: Competitive + Excellent Benefits Benefits: 25 days Holiday(+ bank holidays), 9% Pension, Stocked Free Cafeteria, Free Parking, Life Insurance, Private Medical, Occupational Health Checks, Flexible working. We are seeking an experienced and detail-oriented Quality Inspector to join a cutting-edge engineering team, playing a key role in upholding high standards across the production process. As a Quality Inspector , you will be responsible for the inspection, testing, and validation of components and assemblies to ensure compliance with stringent engineering specifications. Key Responsibilities: Measure and inspect components and assemblies using metrology tools including Faro Arm (CMM). Conduct visual inspections of welds and finished goods to uphold product standards. Record defects and initiate corrective actions, including root cause analysis to prevent recurrence. Collaborate with teams to improve manufacturing processes and drive first-time quality. Maintain and update quality performance metrics to support continuous improvement. Essential Skills & Experience: Minimum 3 years experience in a machine shop or manufacturing environment. Solid knowledge of ISO 9001 and quality/process management tools (e.g., 5S, SPC, FMEA, Ishikawa). Proficient in using CMM or Faro Arm devices and other precision measurement equipment. Ability to read and interpret technical drawings and engineering specifications. Desirable: Knowledge of welding and fabrication processes. Experience in the vacuum or scientific equipment industry. Qualification to BTech/HNC/HND in Mechanical or Manufacturing Engineering. Personal Qualities: Strong initiative and ownership of tasks. Highly motivated with a proactive mindset. Effective communicator, both individually and within teams. Comfortable delivering technical input and engaging in collaborative problem-solving. As a Quality Inspector , you will join a supportive environment offering flexible working hours, excellent development opportunities, and a benefits package including a company pension, health checks, cycle-to-work scheme, and more. If you're a skilled Quality Inspector looking to take the next step in your career, apply now and become part of a business focused on innovation, precision, and excellence. TPA Recruit is a specialist recruitment agency acting on behalf of our client to source and assess suitable candidates for this position. All applications will be reviewed and processed by our team, who will liaise directly with shortlisted individuals throughout the hiring process.
Oct 07, 2025
Full time
Quality Inspector Precision Engineering Location: Lower Dicker, UK Salary: Competitive + Excellent Benefits Benefits: 25 days Holiday(+ bank holidays), 9% Pension, Stocked Free Cafeteria, Free Parking, Life Insurance, Private Medical, Occupational Health Checks, Flexible working. We are seeking an experienced and detail-oriented Quality Inspector to join a cutting-edge engineering team, playing a key role in upholding high standards across the production process. As a Quality Inspector , you will be responsible for the inspection, testing, and validation of components and assemblies to ensure compliance with stringent engineering specifications. Key Responsibilities: Measure and inspect components and assemblies using metrology tools including Faro Arm (CMM). Conduct visual inspections of welds and finished goods to uphold product standards. Record defects and initiate corrective actions, including root cause analysis to prevent recurrence. Collaborate with teams to improve manufacturing processes and drive first-time quality. Maintain and update quality performance metrics to support continuous improvement. Essential Skills & Experience: Minimum 3 years experience in a machine shop or manufacturing environment. Solid knowledge of ISO 9001 and quality/process management tools (e.g., 5S, SPC, FMEA, Ishikawa). Proficient in using CMM or Faro Arm devices and other precision measurement equipment. Ability to read and interpret technical drawings and engineering specifications. Desirable: Knowledge of welding and fabrication processes. Experience in the vacuum or scientific equipment industry. Qualification to BTech/HNC/HND in Mechanical or Manufacturing Engineering. Personal Qualities: Strong initiative and ownership of tasks. Highly motivated with a proactive mindset. Effective communicator, both individually and within teams. Comfortable delivering technical input and engaging in collaborative problem-solving. As a Quality Inspector , you will join a supportive environment offering flexible working hours, excellent development opportunities, and a benefits package including a company pension, health checks, cycle-to-work scheme, and more. If you're a skilled Quality Inspector looking to take the next step in your career, apply now and become part of a business focused on innovation, precision, and excellence. TPA Recruit is a specialist recruitment agency acting on behalf of our client to source and assess suitable candidates for this position. All applications will be reviewed and processed by our team, who will liaise directly with shortlisted individuals throughout the hiring process.
Quality Inspector As-Required 27.50 P/H Inside IR35 Job Description: Urgently seeking Quality Inspectors to provide on-demand / as-required support on a customer programme in Derby. Support will typically be requested with one week's notice and will run for periods of 2-3 weeks at a time. The desired candidates will have previous experience working in an Aerospace Inspection role, performing inspections to engineering drawings, customer purchase orders, industry standards, and specifications. Supporting the final inspection process, support will include: Visual inspection Dimensional inspection, using hand measurement equipment Review completeness of manufacturing documentation (e.g. CofCs, routers, etc.) Document inspection, preparing non-conformance reports as necessary Update customer systems Experience requirements: Demonstrate evidence of more than 2-years in the last 5-years of aerospace experience and poses experience of working within an engineering environment for a minimum of 3 years. Demonstrate knowledge of interpreting engineering drawings Demonstrate knowledge of geometric, dimensioning and tolerance Demonstrate evidence of product specific knowledge and experience in fabricated parts, which are welded and rivited Knowledge / experience of AS9100 and AS9102 standards highly advantageous Strong communications skills, both written and verbal Additional Requirements: To ensure access to technical data, we seek EU Nationals / Passport holders only. This activity is inside IR35 (Umbrella Company Required)
Oct 06, 2025
Contractor
Quality Inspector As-Required 27.50 P/H Inside IR35 Job Description: Urgently seeking Quality Inspectors to provide on-demand / as-required support on a customer programme in Derby. Support will typically be requested with one week's notice and will run for periods of 2-3 weeks at a time. The desired candidates will have previous experience working in an Aerospace Inspection role, performing inspections to engineering drawings, customer purchase orders, industry standards, and specifications. Supporting the final inspection process, support will include: Visual inspection Dimensional inspection, using hand measurement equipment Review completeness of manufacturing documentation (e.g. CofCs, routers, etc.) Document inspection, preparing non-conformance reports as necessary Update customer systems Experience requirements: Demonstrate evidence of more than 2-years in the last 5-years of aerospace experience and poses experience of working within an engineering environment for a minimum of 3 years. Demonstrate knowledge of interpreting engineering drawings Demonstrate knowledge of geometric, dimensioning and tolerance Demonstrate evidence of product specific knowledge and experience in fabricated parts, which are welded and rivited Knowledge / experience of AS9100 and AS9102 standards highly advantageous Strong communications skills, both written and verbal Additional Requirements: To ensure access to technical data, we seek EU Nationals / Passport holders only. This activity is inside IR35 (Umbrella Company Required)
FABRICATION INSPECTOR - £39,520 per annum Knowledge of the following Working with plate form 10mm to 100mm Bridge fabrication Structural Fabrication Heavy beam and plate work. Job Summary: The Fabrication Inspector is responsible for ensuring that all fabricated components meet specified standards, drawings, codes, and customer requirements. This role involves inspecting materials, welds, dimensions, and finishes during and after the fabrication process to verify compliance with quality and safety standards. Responsibilities Perform in-process and final inspections of fabricated metal components and assemblies. Carry out NDE as required Following training Identify & record nonconforming products & oversee resolution as required Generate and maintain inspection documentation as necessary Ensure Inspection test plan is followed First off to final release inspection Inspection visits to sub suppliers Assist with customer visits Calibration / verification of equipment Maintaining welding parameters and welding stores Requirements Essential Ability to read engineering drawings, specification etc. Ability to use measuring equipment Tape measures etc. Ability to use Microsoft Office Ability to plan own workload Experience with QC of structural fabrications during all aspects of production. Familiar with ISO 9001 Driving licence recognised in the UK Good understanding of maths Good communicator Desirable PCN/CSWIP Visual qualification PCN/CSWIP MT qualification Working Conditions The role involves working in an industrial setting, which may include exposure to loud noise, dust, and varying weather conditions. Physical stamina is essential as the role involves manual labour and extended periods of standing. Pay £19.00 p/h + overtime Saturday x 1.5 time Sunday Double time Monday to Thursday 6am-2:30pm & Friday 6am-1pm 39 hour week with overtime available 24 days annual leave + bank holidays
Oct 06, 2025
Full time
FABRICATION INSPECTOR - £39,520 per annum Knowledge of the following Working with plate form 10mm to 100mm Bridge fabrication Structural Fabrication Heavy beam and plate work. Job Summary: The Fabrication Inspector is responsible for ensuring that all fabricated components meet specified standards, drawings, codes, and customer requirements. This role involves inspecting materials, welds, dimensions, and finishes during and after the fabrication process to verify compliance with quality and safety standards. Responsibilities Perform in-process and final inspections of fabricated metal components and assemblies. Carry out NDE as required Following training Identify & record nonconforming products & oversee resolution as required Generate and maintain inspection documentation as necessary Ensure Inspection test plan is followed First off to final release inspection Inspection visits to sub suppliers Assist with customer visits Calibration / verification of equipment Maintaining welding parameters and welding stores Requirements Essential Ability to read engineering drawings, specification etc. Ability to use measuring equipment Tape measures etc. Ability to use Microsoft Office Ability to plan own workload Experience with QC of structural fabrications during all aspects of production. Familiar with ISO 9001 Driving licence recognised in the UK Good understanding of maths Good communicator Desirable PCN/CSWIP Visual qualification PCN/CSWIP MT qualification Working Conditions The role involves working in an industrial setting, which may include exposure to loud noise, dust, and varying weather conditions. Physical stamina is essential as the role involves manual labour and extended periods of standing. Pay £19.00 p/h + overtime Saturday x 1.5 time Sunday Double time Monday to Thursday 6am-2:30pm & Friday 6am-1pm 39 hour week with overtime available 24 days annual leave + bank holidays
On behalf of our client we have an immediate and PERMANENT opportunity for an experienced Welding Inspector! With a pay rate of £19 per hour and premium rate overtime available, this is a rare and exciting opportunity offering long-term, secure employment with an award-winning manufacturing organisation! The successful candidate will be responsible for ensuring that all welding processes meet the required standards of quality and safety. This role is crucial in maintaining the integrity of our client s products and ensuring compliance with industry regulations. The Welding Inspector will work closely with the production team to identify any issues and implement corrective measures. Duties: Conduct thorough inspections of welded components to ensure compliance with specifications and standards. Perform visual inspections and non-destructive testing methods to assess weld quality. Document inspection results, including any defects or non-conformities, and communicate findings to relevant stakeholders. Collaborate with the welding team to provide guidance on best practices and quality assurance measures. Maintain accurate records of inspections, tests, and compliance reports. Participate in continuous improvement initiatives to enhance welding processes and overall product quality. Experience: Proven experience as a Welding Inspector or in a similar role within the welding/fabrication industry. Strong analysis skills with the ability to identify issues and propose effective solutions. Familiarity with quality assurance practices and standards related to welding. Excellent attention to detail and strong organisational skills. Ability to work independently as well as part of a team in a fast-paced environment. If you are passionate about quality assurance in welding processes and possess the necessary skills, we invite you to apply for this exciting opportunity. If you re an experience welding inspector looking for long-term, secure employment with an award-winning organisation APPLY NOW or call Recruitment for more details.
Oct 06, 2025
Full time
On behalf of our client we have an immediate and PERMANENT opportunity for an experienced Welding Inspector! With a pay rate of £19 per hour and premium rate overtime available, this is a rare and exciting opportunity offering long-term, secure employment with an award-winning manufacturing organisation! The successful candidate will be responsible for ensuring that all welding processes meet the required standards of quality and safety. This role is crucial in maintaining the integrity of our client s products and ensuring compliance with industry regulations. The Welding Inspector will work closely with the production team to identify any issues and implement corrective measures. Duties: Conduct thorough inspections of welded components to ensure compliance with specifications and standards. Perform visual inspections and non-destructive testing methods to assess weld quality. Document inspection results, including any defects or non-conformities, and communicate findings to relevant stakeholders. Collaborate with the welding team to provide guidance on best practices and quality assurance measures. Maintain accurate records of inspections, tests, and compliance reports. Participate in continuous improvement initiatives to enhance welding processes and overall product quality. Experience: Proven experience as a Welding Inspector or in a similar role within the welding/fabrication industry. Strong analysis skills with the ability to identify issues and propose effective solutions. Familiarity with quality assurance practices and standards related to welding. Excellent attention to detail and strong organisational skills. Ability to work independently as well as part of a team in a fast-paced environment. If you are passionate about quality assurance in welding processes and possess the necessary skills, we invite you to apply for this exciting opportunity. If you re an experience welding inspector looking for long-term, secure employment with an award-winning organisation APPLY NOW or call Recruitment for more details.
Quality Inspector £13.80 an hour Leicester (LE4) Precision Engineering Monday to Friday 6.30am to 2.30pm (early Friday finish) The Engineering & Manufacturing division of SF Recruitment is currently recruiting for a Quality Inspector to be part of an expanding team due to business growth. The temporary role with a permanent role offered after a successfully 12-week period. We are able to offer an immediate start on this role following a successful one stage interview process. Scope of role - Using customer specifications / engineering drawings to understand expected quality levels. - Inspection of machined and inspected parts - in process / spot inspection / first off. - Using CMM devices such as verniers, gauges & callipers to inspect components accurately. - Raise quality issues to line manager. - Carry out tool calibration duties. - Inspection of welded joints - Inspection of goods inward. The Quality Inspector - Experienced within quality inspection. - Can read engineering drawings. - ISO9001: 2015 standards - experience working to. - Experienced using CMM devices. - Welded joints experience is desirable but not essential. Please apply now to express an interest. All successful candidates will be contacted within 4 working days.
Oct 03, 2025
Seasonal
Quality Inspector £13.80 an hour Leicester (LE4) Precision Engineering Monday to Friday 6.30am to 2.30pm (early Friday finish) The Engineering & Manufacturing division of SF Recruitment is currently recruiting for a Quality Inspector to be part of an expanding team due to business growth. The temporary role with a permanent role offered after a successfully 12-week period. We are able to offer an immediate start on this role following a successful one stage interview process. Scope of role - Using customer specifications / engineering drawings to understand expected quality levels. - Inspection of machined and inspected parts - in process / spot inspection / first off. - Using CMM devices such as verniers, gauges & callipers to inspect components accurately. - Raise quality issues to line manager. - Carry out tool calibration duties. - Inspection of welded joints - Inspection of goods inward. The Quality Inspector - Experienced within quality inspection. - Can read engineering drawings. - ISO9001: 2015 standards - experience working to. - Experienced using CMM devices. - Welded joints experience is desirable but not essential. Please apply now to express an interest. All successful candidates will be contacted within 4 working days.
Job Title: NDE Co-ordinator Location: Oldham Salary: Competitive Oldham Engineering Limited is a well-established medium sized engineering business with a long history and exciting plans for business growth. We are looking to strengthen our team and appoint a NDE Co-ordinator based at our manufacturing sites in Oldham and Sheffield. The role of NDE Coordinator primarily involves undertaking non-destructive testing as well as organising, NDE activities, the successful candidate will be expected to inspect, interpret, evaluate and report in accordance with recommended practice, set procedures, national and international specifications and standards. The primary duties and responsibilities are listed as follows: Visual Inspection. Magnetic Inspection. Liquid Penetrant Inspection. Ultrasonic Inspection. Work to relevant procedures and specifications. Responsible for carrying out and recording daily, weekly, monthly validation checks. Responsible for the recording of results, with respect to interpreting, evaluation and providing a verdict on the results. Responsible for recording and reporting discrepancies, where necessary. Work under observation by clients and client appointed inspection personnel. Provide on-the-job training and guidance to Level I personnel as required. Occasional involvement in technical meetings with client's or client representatives to discuss and interpret NDE requirements. Writing non - / project specific practices procedures. Population of weld logs and NDE logs. Other ad-hoc duties as may be required from time to time to assist with the general operation of the facility. Skills Experience and Qualifications Operators shall be qualified as a minimum to the level of PCN/CSWIP Level II.: Magnetic Particle testing MT Liquid Penetrant Testing: PT Visual Inspection VT Ultrasonic Testing: 3.9 Weldments (Castings, Forgings & Wrought Products also desirable but not essential) The candidate must be competent in using a desktop computer and be fluent in the Microsoft Office suite of software to record, validate and issue appropriate inspection documents. Candidate Requirements The candidate must have the ability to work as part of a team, and on their own using their own initiative. Where required the operator will, as part of the team culture, develop the skill sets and flexibility required to provide continuous improvement and customer focus. The candidate must be flexible wherever possible to meet the company and customer requirements. The candidate must be able to communicate with customers, customers' representatives, external inspection authorities and with all levels of the organisation. As a Company we have a strong manufacturing capability and History, with over 160 years Manufacturing from the Oldham Site. The company has existing strong ties within our Sectors, supported by a strong Blue-Chip Client Base, and we look forward to developing our Team further. Please click on the APPLY button to send your CV and Cover Letter for this role. Candidates with experience of; NDE Coordinator, NDE Technician, Quality Control Inspector, Non-Destructive Testing Technician, Weld Inspector, Quality Assurance, PCN Level II, CSWIP Level II also be considered for this role.
Oct 02, 2025
Full time
Job Title: NDE Co-ordinator Location: Oldham Salary: Competitive Oldham Engineering Limited is a well-established medium sized engineering business with a long history and exciting plans for business growth. We are looking to strengthen our team and appoint a NDE Co-ordinator based at our manufacturing sites in Oldham and Sheffield. The role of NDE Coordinator primarily involves undertaking non-destructive testing as well as organising, NDE activities, the successful candidate will be expected to inspect, interpret, evaluate and report in accordance with recommended practice, set procedures, national and international specifications and standards. The primary duties and responsibilities are listed as follows: Visual Inspection. Magnetic Inspection. Liquid Penetrant Inspection. Ultrasonic Inspection. Work to relevant procedures and specifications. Responsible for carrying out and recording daily, weekly, monthly validation checks. Responsible for the recording of results, with respect to interpreting, evaluation and providing a verdict on the results. Responsible for recording and reporting discrepancies, where necessary. Work under observation by clients and client appointed inspection personnel. Provide on-the-job training and guidance to Level I personnel as required. Occasional involvement in technical meetings with client's or client representatives to discuss and interpret NDE requirements. Writing non - / project specific practices procedures. Population of weld logs and NDE logs. Other ad-hoc duties as may be required from time to time to assist with the general operation of the facility. Skills Experience and Qualifications Operators shall be qualified as a minimum to the level of PCN/CSWIP Level II.: Magnetic Particle testing MT Liquid Penetrant Testing: PT Visual Inspection VT Ultrasonic Testing: 3.9 Weldments (Castings, Forgings & Wrought Products also desirable but not essential) The candidate must be competent in using a desktop computer and be fluent in the Microsoft Office suite of software to record, validate and issue appropriate inspection documents. Candidate Requirements The candidate must have the ability to work as part of a team, and on their own using their own initiative. Where required the operator will, as part of the team culture, develop the skill sets and flexibility required to provide continuous improvement and customer focus. The candidate must be flexible wherever possible to meet the company and customer requirements. The candidate must be able to communicate with customers, customers' representatives, external inspection authorities and with all levels of the organisation. As a Company we have a strong manufacturing capability and History, with over 160 years Manufacturing from the Oldham Site. The company has existing strong ties within our Sectors, supported by a strong Blue-Chip Client Base, and we look forward to developing our Team further. Please click on the APPLY button to send your CV and Cover Letter for this role. Candidates with experience of; NDE Coordinator, NDE Technician, Quality Control Inspector, Non-Destructive Testing Technician, Weld Inspector, Quality Assurance, PCN Level II, CSWIP Level II also be considered for this role.
About the Role We are currently recruiting experienced Pipefitters to join a well-established engineering and fabrication team delivering key industrial projects across Teesside. This is an excellent opportunity to work on long-term assignments within the energy, chemical, and manufacturing sectors - offering stability, competitive rates, and a strong commitment to health, safety and quality. Key Responsibilities Read and interpret isometric, P&ID, and GA drawings Measure, cut, bend and prepare pipework using appropriate hand and power tools Install pipe systems using threaded, flanged, welded, or mechanical joints (carbon/stainless steel) Support pressure testing, hydrotesting and flushing activities as required Work to site-specific tolerances and project quality standards Assist in alignment of pipework to equipment and structural supports Collaborate with site supervisors, welders and inspectors to ensure safe, efficient progress Maintain a clean and safe working environment in line with site HSE protocols What We're Looking For Time-served apprenticeship or NVQ Level 3 in Pipefitting or Mechanical Engineering Previous experience working on industrial or heavy engineering sites (petrochemical, power, fabrication yards, etc.) Strong ability to work from drawings and understand complex pipe routes and layouts Valid CCNSG Safety Passport (required) Additional qualifications (e.g. IPAF, Confined Space, Welding appreciation) are desirable Must be eligible to work in the UK - due to the nature of some projects, UK National status may be required What You Need to Know All work is Teesside-based - no travel or lodging required Overtime opportunities available Site-specific induction and competency tests may be carried out
Sep 25, 2025
Seasonal
About the Role We are currently recruiting experienced Pipefitters to join a well-established engineering and fabrication team delivering key industrial projects across Teesside. This is an excellent opportunity to work on long-term assignments within the energy, chemical, and manufacturing sectors - offering stability, competitive rates, and a strong commitment to health, safety and quality. Key Responsibilities Read and interpret isometric, P&ID, and GA drawings Measure, cut, bend and prepare pipework using appropriate hand and power tools Install pipe systems using threaded, flanged, welded, or mechanical joints (carbon/stainless steel) Support pressure testing, hydrotesting and flushing activities as required Work to site-specific tolerances and project quality standards Assist in alignment of pipework to equipment and structural supports Collaborate with site supervisors, welders and inspectors to ensure safe, efficient progress Maintain a clean and safe working environment in line with site HSE protocols What We're Looking For Time-served apprenticeship or NVQ Level 3 in Pipefitting or Mechanical Engineering Previous experience working on industrial or heavy engineering sites (petrochemical, power, fabrication yards, etc.) Strong ability to work from drawings and understand complex pipe routes and layouts Valid CCNSG Safety Passport (required) Additional qualifications (e.g. IPAF, Confined Space, Welding appreciation) are desirable Must be eligible to work in the UK - due to the nature of some projects, UK National status may be required What You Need to Know All work is Teesside-based - no travel or lodging required Overtime opportunities available Site-specific induction and competency tests may be carried out
Quality Manager & Responsible Welding Coordinator Steelway 6- Month FTC Competitive - based on experience (pro-rata) Queensgate Works, Bilston Road, Wolverhampton, West Midlands, WV2 2NJ Steelway are a leading metal fabrication specialist, committed to delivering high-quality products and services to our customers. We are now looking for an experienced Quality Manager to take ownership of our Quality Management System and act as our Responsible Welding Coordinator (RWC). This is a hands-on role, where you will review, develop, and implement processes that ensure compliance, efficiency, and continual improvement across the business. Key Responsibilities: Quality Management System (QMS): Review, update, and improve the company s QMS in line with current business needs. Align processes where possible with group systems, highlighting any gaps. Create and implement processes, procedures, and supporting documentation. Develop and roll out training and guidance to staff. Establish an internal audit schedule, conduct audits, and recruit/train internal auditors. Overhaul the QMS filing system to be user-friendly and accessible. Introduce and embed a robust internal and external NCR system. Quality Inspection: Define and implement inspection requirements for the manufacturing process. Asist in identifying, recruiting and managing quality inspectors as needed. Track and report on KPIs to demonstrate inspection effectiveness. Ensure NDT testing is carried out in line with requirements, monitoring results and corrective actions. Operational Quality Support: Develop quality plans for customer orders and agree these with internal teams and clients. Oversee adherence to quality plans, holding stakeholders accountable. Arrange and host internal and third-party inspections, managing external auditors and assessors. Responsible Welding Coordinator: Ensure compliance with EN1090, maintaining all required welding procedures. Oversee WPS and related documentation. Provide training and guidance to welding staff to meet required standards. Liaise with the external Welding Coordinator to improve processes and strengthen compliance. About You: Strong knowledge of EN1090 and welding requirements. Proven experience implementing and managing QMS systems (ISO9001 minimum). Background in quality within a steel fabrication environment. Practical, hands-on approach not a consultancy role, but someone who takes ownership. Excellent IT skills and ability to create clear, structured documentation. Strong communicator, with the ability to influence and support at all levels. What We Offer: 33 days holiday including Bank Holidays and Christmas shutdown Competitive salary, dependent on experience Company pension scheme On-site parking Opportunities for training and development Bank Holidays off & Christmas shutdown If you are a quality professional with a strong background in steel fabrication and a practical approach to leadership, this is an excellent opportunity to make a real impact. Apply today and join Steelway as our new Quality Manager & Responsible Welding Coordinator.
Sep 22, 2025
Contractor
Quality Manager & Responsible Welding Coordinator Steelway 6- Month FTC Competitive - based on experience (pro-rata) Queensgate Works, Bilston Road, Wolverhampton, West Midlands, WV2 2NJ Steelway are a leading metal fabrication specialist, committed to delivering high-quality products and services to our customers. We are now looking for an experienced Quality Manager to take ownership of our Quality Management System and act as our Responsible Welding Coordinator (RWC). This is a hands-on role, where you will review, develop, and implement processes that ensure compliance, efficiency, and continual improvement across the business. Key Responsibilities: Quality Management System (QMS): Review, update, and improve the company s QMS in line with current business needs. Align processes where possible with group systems, highlighting any gaps. Create and implement processes, procedures, and supporting documentation. Develop and roll out training and guidance to staff. Establish an internal audit schedule, conduct audits, and recruit/train internal auditors. Overhaul the QMS filing system to be user-friendly and accessible. Introduce and embed a robust internal and external NCR system. Quality Inspection: Define and implement inspection requirements for the manufacturing process. Asist in identifying, recruiting and managing quality inspectors as needed. Track and report on KPIs to demonstrate inspection effectiveness. Ensure NDT testing is carried out in line with requirements, monitoring results and corrective actions. Operational Quality Support: Develop quality plans for customer orders and agree these with internal teams and clients. Oversee adherence to quality plans, holding stakeholders accountable. Arrange and host internal and third-party inspections, managing external auditors and assessors. Responsible Welding Coordinator: Ensure compliance with EN1090, maintaining all required welding procedures. Oversee WPS and related documentation. Provide training and guidance to welding staff to meet required standards. Liaise with the external Welding Coordinator to improve processes and strengthen compliance. About You: Strong knowledge of EN1090 and welding requirements. Proven experience implementing and managing QMS systems (ISO9001 minimum). Background in quality within a steel fabrication environment. Practical, hands-on approach not a consultancy role, but someone who takes ownership. Excellent IT skills and ability to create clear, structured documentation. Strong communicator, with the ability to influence and support at all levels. What We Offer: 33 days holiday including Bank Holidays and Christmas shutdown Competitive salary, dependent on experience Company pension scheme On-site parking Opportunities for training and development Bank Holidays off & Christmas shutdown If you are a quality professional with a strong background in steel fabrication and a practical approach to leadership, this is an excellent opportunity to make a real impact. Apply today and join Steelway as our new Quality Manager & Responsible Welding Coordinator.
