81 jobs found

Elevation Recruitment Group are currently working in partnership with a leader in high precision forging industry. They currently have an opportunity for a CNC Turner to join their existing team. PAY: £18.68 - £19.67 (£40,745 - £42,959) inclusive of shift allowance, with the opportunity to progress further. HOURS: Week 1: Wednesday, Thursday, Friday - Days Week 2: Sunday, Monday, Tuesday, Wednesday - Nights Week 3: Monday, Tuesday - Days / Thursday, Friday - Nights ( 6 hours on Friday night or the opportunity to work additional 6 hours at time & half) Reverts back to week one Average of 42 hours per week with unlimited overtime paid at time & half JOB OVERVIEW This CNC Machinist role will work amongst the machining forging and tooling team, on specified drawings for both manual and CNC machining centres. The parts machined feed both the commercial and aerospace markets therefore, attention to detail is key. RESPONSIBILITIES • Tool Setting and operating of cnc lathes• Editing using Fanuc Controls • First line daily maintenance & 5 'S' • First line inspection • Operating powered cranes and lifting equipment • Producing high precision medium to large components • Small batch Machining environment - typically 6-12 pieces SKILLS & EXPERIENCE • Must be a strong CNC Machinist with extensive knowledge machining large components • Must have worked within high precision industry • Competent in the use of inspection equipment • Continuous Improvement experience • Be prepared to get involved with any process improvement • A flexible approach to working hours and be prepared to travel if required for training purposes COMPANY BENEFITS • Cycle to Work Scheme • Electric Car Scheme • Discounted Health Scheme Plan (Westfield Health Cash Plan Scheme) • Lifestyle Savings (Discounts across major UK retailers and supermarkets • Well-being (Employee Assistance) • High-five (Employee Recognition Scheme) • Costco Membership • Long Service Recognition 15, 25 and 40 Years • Opportunity to apply for additional unpaid holiday (maximum 40 Hours) per calendar year, to be taken in one block • Enhanced Maternity Leave • Enhanced Paternity Leave • Health Screening • Department Specific PPE Work Wear

CNC Turning Operator / Machinist Location: Corsham Wiltshire Hours: 39/week (Mon-Thu 8am-5pm, Fri 8am-1pm) Overtime: Available Eligibility: Must be eligible to work in the UK About Us The company has over 60 years of manufacturing experience. We operate 11 CNC lathes (Puma Lynx to Puma 700) and 2 CNC mill/turn machines, all using Fanuc controls. We are expanding and seeking a reliable, skilled CNC Machinist. Key Responsibilities Manufacture precision components to CAD drawings Set, operate, and (ideally) program CNC lathes Run multiple machines during peak periods Inspect parts to maintain quality standards Maintain tooling and program records Suggest improvements to machining methods and programs Follow health and safety procedures Requirements Minimum 2 years' experience with CNC lathes Apprentice trained (preferred) CAD/CAM experience (advantageous) What We Offer Competitive pay (based on experience/ability) Company pension (after 3 months) Mileage subsidy 25 days holiday + bank holidays (includes Xmas shutdown) PPE and uniform provided Onsite parking, free tea/coffee Cycle to work scheme

Ready to take your machining skills to the next level? Our client, based in West Yorkshire, is seeking a talented and motivated CNC Machinist to join their dynamic team within the engineering industry. This is a fantastic opportunity for someone who is passionate about precision engineering, enjoys working with cutting-edge technology, and thrives in a collaborative, fast-paced environment. If you take pride in delivering high-quality work and are eager to grow your skills with a forward-thinking company, we want to hear from you. Your Role: As a CNC Machinist, you will play a vital role in their production team. Your expertise will contribute to the creation of high-quality components that meet our clients' specifications. Key Responsibilities: Set up and operate CNC machines with precision and accuracy. Read and interpret blueprints, technical drawings, and work orders. Monitor machining processes to ensure quality standards are met. Perform routine maintenance on machines to ensure optimal performance. Collaborate with team members to improve processes and efficiency. Who You Are: Experienced: A minimum of 3 years of experience as a CNC Machinist is preferred. Qualifications: Apprentice trained NVQ L3 (Essential) Detail-Oriented: You have an eye for detail and a commitment to producing top-quality work. Problem Solver: You enjoy tackling challenges and finding innovative solutions. Team Player: You thrive in a collaborative environment and communicate effectively. Technical Skills: Proficient in operating CNC lathes, mills, and programming (G-code, M-code). If you're excited about this opportunity and want to be part of a thriving engineering team, we'd love to hear from you!. Be sure to tell us why you're the perfect fit for our CNC Machinist position. We are an equal opportunity employer and welcome applications from all qualified individuals. We celebrate diversity and are committed to creating an inclusive environment for all employees. Take the next step in your career! Your future awaits! Adecco is a disability-confident employer. It is important to us that we run an inclusive and accessible recruitment process to support candidates of all backgrounds and all abilities to apply. Adecco is committed to building a supportive environment for you to explore the next steps in your career. If you require reasonable adjustments at any stage, please let us know and we will be happy to support you. Adecco acts as an employment agency for permanent recruitment and an employment business for the supply of temporary workers. The Adecco Group UK & Ireland is an Equal Opportunities Employer. By applying for this role your details will be submitted to Adecco. Our Candidate Privacy Information Statement explaining how we will use your information is available on our website.

About the Role Our client is a market-leading manufacturer of high-end precision machined components and assemblies, serving STEM markets including Bio-Tech & Medical Equipment, High-Tech Industrial Applications, Defence and Aerospace. Based in Bedfordshire, they are looking for an experienced CNC Production Manager to lead site operations and drive delivery of their production plan. This is a hands-on leadership role suited to someone with a strong CNC machining background who can hit the ground running, maintain quality and delivery standards, and lead a skilled production team. Key Responsibilities Production & Delivery Lead all production activities, placing health and safety as the top priority at all times Deliver monthly sales targets and maintain daily delivery schedules Ensure critical promise dates are met and communicated to all relevant parties Report machine breakdowns and propose corrective actions Ensure Preventative Machine Maintenance is conducted Quality Achieve on-time delivery in excess of 90% Maintain reject rates below 1% of turnover Drive quality ownership back to the shopfloor - "Build in Quality" culture Promote continuous improvement and lean thinking to eliminate process waste People & Leadership Manage and lead the production team - staffing, holidays, training, appraisals, attendance and discipline Motivate and coach team leaders and machinists to operational success Set departmental KPIs and review ongoing performance Promote and uphold high standards through personal example Support tool utilisation and overhead tooling budget management Ensure full compliance with Health & Safety and environmental regulations What We're Looking For Essential: CNC machining experience - this is a firm requirement; candidates without a CNC background will not be considered Minimum 5 years' production experience in the engineering or precision manufacturing sector At least 3 years in a leadership, supervisory or management role Time-served CNC machinist (milling or turning) from an apprenticeship or equivalent practical experience Strong communication, analytical and problem-solving skills Solid understanding of precision engineering processes and materials Desirable: Relevant management qualification Estimation or project management certifications Practical knowledge of MRP, master scheduling and capacity planning Familiarity with Progress MIS or similar production management systems How to Apply If you have the CNC background and leadership experience we're looking for, we'd love to hear from you. Please get in touch with Kim or Aimee directly: CNC / CNC Machinist / CNC Turner / CNC Miller / CNC Manager / CNC Team Leader / CNC Production Manager / Response Personnel are acting as a recruitment agency in relation to this vacancy. All applications are treated in strict confidence.

CNC Operator/Miller/Turner/Machinist (Precision Engineering) Preston £35,000 - £40,000 + 4 Day Work Week + Overtime 1.4x + Company Pension + Life Insurance + Free Parking + Sick Pay Are you a CNC Turner or similar looking to join a well-established engineering company with over 35 years of industry expertise, manufacturing high-precision components for the Aerospace, Rail, and Motorsport sectors? Do you want to join a business that not only offers a great work-life balance through a 4-day working week, but also provides overtime opportunities, long-term stability, and the chance to work with advanced CNC machinery in a supportive team environment? On offer is a fantastic opportunity to become part of a highly respected engineering company that invests in its people, maintains high manufacturing standards, and delivers precision-machined components to some of the UK's most demanding industries. This role would suit a skilled CNC Turner or similar, with experience programming and setting CNC Lathes, who is confident interpreting engineering drawings, maintaining tight tolerances, and working to high quality standards within a precision engineering environment. In this role, the successful candidate will be responsible for programming, setting, and operating CNC Lathes, ensuring components are manufactured accurately and efficiently while maintaining excellent quality and health & safety standards across production. The Role: Programming, setting, and operating CNC Turners and Lathes Working with XYZ Lathes using ProtoTRAK controls Interpreting engineering drawings and tolerances Manufacturing precision components for Aerospace, Rail, and Motorsport Maintaining high quality and health & safety standards Optional opportunity to develop CNC Milling skills Working Monday to Thursday, 06:45 - 17:00 Overtime available paid at 1.4x The Person: CNC Turner or similar background Apprenticeship trained or 3+ years machining experience Experience programming and setting CNC Lathes ProtoTRAK or Mazatrol experience advantageous Strong understanding of tooling, materials, and tolerances Good communication skills and team-oriented attitude Reference Number: BBH25229H If you're interested in this role, click 'apply now' to forward an up-to-date copy of your CV, or call us now. If this job is not quite right for you but you are looking for a new position, please contact us for a confidential discussion on your career. Ernest Gordon Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job, you accept the T&C's, Privacy Policy and Disclaimers which can be found at our website.

CNC Turner Commutable from Nottinghamshire, Leicestershire and surroundings. Salary up to £38,000 per annum - Days Day Shift Permanent Do you have experience working within precision machining and high-quality solutions, from either aerospace or subcontracting industries. We are you looking for experienced CNC Turner's to deliver critical work to a variety of clients and suppliers. What you will be doing: Operating and setting up CNC Turning Machines Knowledge of Fanuc, Siemens or Heidenhain controls Daily maintenance and inspections on machinery Ensure all work completed to a high standard Following complex engineering drawings Skills Experience Proven CNC experience Knowledge ideally with Fanuc, Heidenhain or Siemens but not essential Able to use measuring equipment for quality checking Able to follow health and safety Able to read engineering drawings If this role appeals and would like to know more contact Sasha Atkinson on (url removed)

CNC Setter OperatorNottingham (South)£32000-£37800 + Shift Pay when applicable + 5% Bonus +Pension + 33 Holidays + GymMon-Fri role, willing to consider permanent mornings (6-2), permanent afternoons (2-10) or permanent nights (10-6) Are you an experienced CNC Machinist, with experience of setting/operating on both milling and turning machines looking for a well paid permanent Mon-Fri role.My client can offer a range of different shift patterns from permanent mornings, to afternoons to nights. Shift allowance is 10% of afternoon shifts, 20% on nights. This is an opportunity to work in excellent working conditions (onsite gym and subsidised restaurant) and earn shift pay, overtime (1.5x / 2x Sundays) working within a busy and large CNC workshop.The company are specialist manufacturers and operate on a global scale. They have a wide range of Machinery and you will be working with metals and plastics.This role would suit a CNC Miller and Turner who can set and operate on 5 axis machines. The Role: Permanent role working Mon-Fri with great Benefits including: Shift pay on afternoon/night shift, bonus, overtime, 5% Pension, 33 holidays, Onsite Restaurant and Gym Flexibility of shift pattern Setting and operating CNC 5 axis Milling and Turning machines Performs in-process inspection using a wide variety of measuring devices, including CMM's The Candidate: Experience of setting and operating within a Manufacturing environment. Working knowledge of CNC Milling and turning machines Ability to use required gauges or instruments. Reference Number: BBBH273817To apply for this role or to be considered for further roles, please click "Apply Now" or contact Nick Smith at Rise Technical Recruitment. Rise Technical Recruitment Ltd acts an employment agency for permanent roles and an employment business for temporary roles. The salary advertised is the bracket available for this position. The actual salary paid will be dependent on your level of experience, qualifications and skill set and will be decided by our client, the employer. Rise are not responsible or liable for any hiring decisions made by the end client. We are an equal opportunities company and welcome applications from all suitable candidates.

Turning Setter / Operator - Permanent Role (Relocation Support up to 3,000) Location: Aldershot, Hampshire, GU12 Salary: 20.00 - 25.00 per hour (DOE) Hours: Monday - Thursday, 06:30 - 15:15; Friday, 06:00 - 13:00 Relocation Support: Up to 3,000 We are seeking a skilled Turning Setter / Operator to join a leading precision engineering team, working on high-quality components for aerospace and automotive clients. This is a permanent, full-time role offering excellent pay, day shifts, and relocation support. Key Responsibilities: Set and operate CNC turn/mill machines (including Mazak). Prepare materials, tooling, and set machines for new jobs. Read and interpret engineering drawings and programs. Carry out precision checks using micrometers, verniers, and other inspection equipment. Ensure all components meet quality and specification standards. Support colleagues, resolve technical queries, and maintain smooth workflow. Follow quality systems, health & safety protocols, and company processes. Skills & Experience Required: Engineering qualification or equivalent experience. 3-5 years' experience in a similar setting/role. Strong knowledge of CNC operations and inspection tools. Ability to problem-solve systematically. Proactive, adaptable, and detail-oriented team player. Excellent technical and mathematical skills. What's on Offer: Permanent, stable employment. Competitive hourly rate ( 20 - 25 DOE). 4.5-day working week with early Friday finish. Relocation package up to 3,000. To apply, send your CV to (url removed) For more details, call (phone number removed) Proactive Global is committed to equality in the workplace and is an equal opportunity employer. Proactive Global is acting as an Employment Business in relation to this vacancy.

CNC Turner - Multiple Roles (PAYE Contract) Location: Titchfield, near Fareham, Hampshire Contract Type: PAYE (until end of December 2026!) About the Roles We are expanding our team and have multiple contract vacancies for experienced machinists at our well-equipped manufacturing facility in Titchfield, Hampshire. Roles are available across CNC Turning machining, offering a supportive and busy engineering environment. Shift Pattern Training: Day shifts initially After Training: Early or late shifts Shift Details & Rates: Shift Hours First 12 Weeks After 12 Weeks Day (training)7:30 am - 4:15 pm Mon-Thu, 7:30 am - 11:30 am Fri 18.72 ( 21.44 inc. holiday) 19.29 ( 22.09 inc. holiday) Early 6:00 am - 2:00 pm Mon-Thu, 6:00 am - 1:30 pm Fri 20.59 ( 23.59 inc. holiday) 21.22 ( 24.30 inc. holiday) Late 2:00 pm - 11:45 pm Mon-Thu 22.46 ( 25.73 inc. holiday) 23.15 ( 26.51 inc. holiday) Overtime As required 28.08 ( 32.16 inc. holiday) 28.93 ( 33.14 inc. holiday) Sundays As required 37.44 ( 42.88 inc. holiday) 38.58 ( 44.18 inc. holiday) Vacancies Available 1x Grinder 3x CNC Turner HT42 1xNH Fast tems 1x H242 & Alphas Key Responsibilities Set up and operate CNC lathes, mills, grinders, or sliding head machines Work from engineering drawings and work instructions Record and interpret SPC data Use precision measuring tools (verniers, micrometers, plug gauges) Perform manual machining, toolmaking, and deburring tasks Maintain safe working practices and support continuous improvement initiatives Experience Required Proven machining experience in relevant roles CNC machinists: experience on machines such as Mori Seiki NH5000, Hardinge Conquest, Citizen Sliding Head, etc. Fastems experience preferred for CNC Machining Centre roles Ability to read and work from engineering drawings Competence in SPC recording and precision measuring tools Apprenticeship or equivalent practical experience Aerospace, defence, or regulated industry experience desirable Right to work in the UK and eligible for ITAR-controlled work If you have CNC or manual machining experience and want to join a busy, supportive engineering team, we'd love to hear from you.

We are recruiting for both a Skilled or Semi CNC Mill/Turn Machinist for a well established Aerospace company based on Poole, Dorset. Responsibilities: Programming, setting and operating CNC MILL/TURN Lathe machines FANUC operating control system to produce turned components to customer drawings and specifications Producing offline and online CNC programs click apply for full job details

Are you an experienced CNC Miller looking for your next contract opportunity?Our client, a leading aerospace precision manufacturer based in Sheffield , is seeking skilled CNC Miller to support increased production demand This role involves setting and operating CNC Milling machines using Fanuc controls to produce high-precision aerospace components. Candidates with experience machining exotic materials such as Inconel and working to tight aerospace tolerances will be highly desirable. CNC Miller 3-Month Contract Outside IR35Competitive Rates 37 hours per week - Early & Late shifts (continental shifts also available) CNC Miller Job Description• Set and operate CNC Milling machines (Hartford 3+ axis) with Fanuc controls• Manufacture high-precision aerospace components including structural parts, engine components, and complex machined details• Work from engineering drawings and job cards to produce components to tight tolerances• Machine exotic materials such as Inconel• Carry out drilling, trimming, and finishing operations on formed components (e.g. titanium parts)• Ensure all work is completed in line with aerospace and quality standards CNC Miller Essential Experience/Skills/Qualifications• Proven experience setting and operating CNC milling machines (3-axis or above, Fanuc controls essential)• Strong background in precision machining within aerospace or similarly regulated industries• Experience machining exotic materials (e.g. Inconel) is highly desirable• Ability to read and interpret engineering drawings• Flexible approach to shift work (earlies, lates, or continental)• Must be eligible to work in the UK (ITAR regulated site - no restrictions) CNC Miller Additional Information• Immediate start available following a one-stage, on-site interview with the Head of Production and CNC Team Leader• Candidates must bring passport and safety boots to interview• 1 CNC Miller position available• Candidates must bring passport and safety boots to interview• Multiple CNC Turner positions available

Are you a CNC Turner looking for your next opportunity? Our client located in Basildon is growing their team, and looking for an experienced CNC Turner to join them! Job Title: CNC Turner Location: Basildon, Essex Salary: £18.00 - £21.00 per hour (depending on experience) Job Type: Full-time, Permanent Company Overview A well-established precision engineering company based in Basildon is looking to expand its skilled workforce with the addition of an experienced CNC Turner. The business operates within high-spec manufacturing sectors and prides itself on quality, precision, and reliability. Role Overview The CNC Turner will be responsible for setting, operating, and programming CNC lathes to produce precision components in line with detailed engineering drawings. This is a hands-on role suited to a motivated individual with a strong background in CNC machining and a keen eye for detail. Key Responsibilities Set, operate, and program CNC turning machines (Fanuc controls preferred) Work from detailed engineering drawings and specifications Produce high-quality components to tight tolerances Conduct first-off inspections and in-process checks using measuring equipment Make program edits and tooling adjustments as required Ensure efficient machine operation and minimise downtime Maintain a safe and organised working environment Collaborate with colleagues across production and quality departments Candidate Requirements Proven experience as a CNC Turner in a precision engineering environment Strong knowledge of CNC setting and operation; programming experience highly desirable Experience using Fanuc controls Ability to read and interpret complex engineering drawings Skilled in the use of inspection and measuring equipment (e.g. micrometers, verniers) High attention to detail and commitment to quality Ability to work independently and as part of a team Desirable Skills & Experience Experience working with a variety of materials including stainless steel, aluminium, and exotic alloys Background in subcontract or batch production environments Engineering apprenticeship or equivalent qualification Working Hours Monday to Friday Day shift (overtime available) Benefits Competitive hourly rate (£18-£21 per hour DOE) Overtime opportunities at enhanced rates Pension scheme 20 days holiday plus bank holidays Stable, long-term employment with progression opportunities How to Apply To apply for this exclusive opportunity, please submit an up-to-date CV by clicking the Apply button, or contact me directly for a confidential discussion. If you have not been contacted by A1 Personnel within two weeks of submitting your application, please assume that your CV has not been shortlisted on this occasion. A1 Personnel is acting as a specialist recruitment consultancy in relation to this vacancy.

Hello, We are currently looking for the below role, if this is something of interest then please get in touch. CNC Machninist (Turning) Required to work manufacturing company based in Milton Keynes. We are currently looking for CNC Programmer Setter Operator for an experienced Turner who can programme online ( at the machine) using Fanuc controlled machines; they will also need to set and operate the machine. We are willing to offer training for the right candidate, but they must have worked with CNC lathes previously and be able to set and operate. We have a simple pre screening test that we would like all potential candidates to complete prior to arranging interviews. This test will consist of point-to-point positions with G-code (G1, G2 & G3). The two lathe we have areas follows; Doosan Puma 2600SY II CNC lathe equipped with Doosan-Fanuc 0iTF Plus CNC Control System with Manual Guide 'i' with bar feeder. Live tooling with sub spindle. Leadwell Turning Centre LTC-25i LVM with Fanuc controls single spindle C axis live tooling. The rate of pay will be between 13- 19 per hour depending on experience. Hours of work are 7.45m to 4.30pm Monday to Thursday and 7.45am to 3.30pm on Fridays with a 45-minute unpaid lunchbreak each day, a total of 39 hours per week. There is also potential for overtime. Overtime payment is as follows. The first 4 hours worked in excess of normal hours are paid 1.5 times the hourly rate, thereafter, hours worked are paid at twice the hourly rate. Working extra hours on a Saturday, first 4 hours at 1.5 times the hourly rate, thereafter twice the hourly rate. Working extra hours on a Sunday, providing the preceding Saturday has been worked, you will be paid at twice the hourly rate. Working on a Bank Holiday will be paid at twice the hourly rate Upon successful completion of probation period, we can offer the following: 25 days annual leave plus bank holidays. Pension. Life Cover. Employee assistance programme. Cycle to work scheme. Costco Membership. If you are interested, please send a copy of your CV to (url removed) and from there we can arrange the test to be sent across providing you fit the requirements. Kind regards, Jared Raymond (url removed) Proactive Global is committed to equality in the workplace and is an equal opportunity employer. Proactive Global is acting as an Employment Business in relation to this vacancy.

We are recruiting for a Permanent CNC Turner for an engineering company in Verwood that has a long and established reputation for customer excellence and responsiveness in the supply of complex, quality critical precision machined components and related assemblies. The successful CNC Turner (Fanuc) will be responsible for the manufacture of quality parts. Responsibilities: - Run, set & operate CNC Turning (Lathes) Machine Centres- Setting tools & producing components- Loading/unloading of CNC machine tools and fixtures- Ability to select, set and change tools- Working on highly technical products to tight tolerances- Maintain safe operations by adhering to safety procedures and policy- Complete necessary daily documents such as Time Sheets Key Areas required: - Time Served- Excellent communication - Good Engineering Background- Ability to Program at the Machine Control- Ability to inspect own work- Programming in Fanuc - Manual Turning experience- Experience of CNC lathes- Ability to read engineering drawings- Ability to work to fine tolerances- Flexibility with regard to shifts and over-time Hours: 39 hours per week; Monday to Thursday 7:30am- 4:30pm and Friday 7:30am- 12:30pm Salary: up to £23 per hour depending on experience Occasional overtime at x1.33 (start early or finish later) What can you expect in return? Free life assurance 25 days holiday + 8 bank holidays Onsite parking Pension To apply for this excellent opportunity please apply now with your latest CV and we will be in touch in due course.

CNC Operator Location: Essex Salary: Competitive, Hours: Monday to Friday An established and growing precision engineering business is seeking an experienced CNC Turner Programmer Setter to join its machining team. This is an excellent opportunity to join a forward thinking manufacturer working across a range of specialist industries. Responsibilities Manufacture precision components for industrial sectors including scientific, communications, aerospace and medical applications. Program, set and operate CNC milling machines in line with customer specifications and production schedules. Ensure all programmes and set ups are completed within allocated time frames. Carry out first off inspections to confirm accuracy before full production runs. Support the introduction of new projects into manufacturing. Machine a wide variety of materials to exacting tolerances and high quality finishes. Provide support across the milling department as required. Troubleshoot machining issues in collaboration with the team. Provide cover within the milling team during periods of absence. Maintain a clean and organised work area at all times. Support colleagues and other departments when required. Work in accordance with health and safety regulations and company procedures. Undertake any other reasonable duties required to support manufacturing operations. Desired Skills and Experience Minimum five years programming and setting three, four and five axis CNC machines. Strong experience using CAD CAM software, ideally Hypermill. Confident reading and interpreting detailed engineering drawings. Ability to inspect components to a high level of accuracy. Excellent attention to detail with a strong focus on quality and finish. Able to work independently and use own initiative. If you are a skilled CNC professional looking for a new opportunity within a growing engineering environment, this role offers long term stability and the chance to work on technically interesting projects. Adecco acts as an employment agency for permanent recruitment and an employment business for the supply of temporary workers. The Adecco Group UK & Ireland is an Equal Opportunities Employer. By applying for this role your details will be submitted to Adecco. Our Candidate Privacy Information Statement explaining how we will use your information is available on our website.

CNC Setter / Operator (Days Based) £14 p/h - £18 p/h + 1.5x Overtime + Mon-Fri + Pension + Days Only + Early Finish Friday + 39hr Week + Training Bristol, South West England Are you a CNC Setter and Operator with milling experience, looking to join a leading manufacturer business with over 50 years history supplying some of the most prestigious names in the Aerospace and Defence industries and receive ongoing training and development? This company has specialised in manufacturing high end CNC machined components for the Aerospace, Defence, Oil and Gas industries for over 50 years. They provide a clean environment for precision working and offer plenty of progression to build a long-term career. You will be a CNC Setter Operator, and your role involves the setup, operation, and of 5-axis CNC Milling machines. Your expertise in machine setup, and precision machining will ensure the production of high-quality parts that meet strict industry standards and specifications. This role would suit a CNC Setter/Operator from a milling background, looking for a stable role with a longstanding manufacturer who offer ongoing training on programming and regular pay-reviews. The Role Experience in setting up and operating 5-axis CNC milling machines Create a variety of parts for Aerospace and Defence industries Monday to Thursday from 7:30am to 4:30pm and 12:30pm finishes on Fridays The Person CNC Miller Commutable to Bristol Reference Number: BBBH24899a CNC Operation, CNC Setter Operator, CNC Miller, CNC Turner, Machine Operator, Precision Engineering, Programmer, Production, Precision Engineering, Bristol If you're interested in this role, click 'apply now' to forward an up-to-date copy of your CV, or call us now. If this job isn't quite right for you but you are looking for a new position, please contact us for a confidential discussion on your career. Ernest Gordon Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job, you accept the T&C's, Privacy Policy and Disclaimers which can be found at our website.

CNC Turner (Setter / Operator) £36,000 - £39,000 + Training + Progression + Overtime + Commutable from Cumbernauld, Kilsyth, Lennoxtown, Glasgow, Croy, Denny, Falkirk, Kirkintilloch. Are you a CNC Setter/Operator looking for a permanent role, working Monday - Friday, with overtime available and an early finish at the end of the week? Excellent opportunity to join a UK industry-leading company, offering a great company benefits package as well as further on-the-job training to develop your skills. This well-established manufacturer continues to go from strength to strength, making this a fantastic time to work for them. They have a great reputation for progressing their Engineers. On offer is a secure, highly varied role in which you will set up and operate, and potentially programme, CNC machines to manufacture a range of components. This role suits a CNC Turner seeking a permanent position, working Monday-Friday, with a 4-day week on the back shift. The Role: Setting, operating and programming CNC machines. Manufacturing a range of components Early Shift - (Monday to Thursday 06:00 - 14:15) (Friday 06:00 - 11:10) Back Shift - (Monday to Thursday 14:15 - 23:45) (Friday OFF) The Person: CNC Turner Looking to work Monday - Friday, days-based, with overtime and an early finish at the end of the week. Wanting a great company benefits package, as well as further on-the-job training within mechanical engineering. Reference Number: BBBH271562 To apply for this role or to be considered for further roles, please click "Apply Now" or contact Kier Rees at Rise Technical Recruitment. Rise Technical Recruitment Ltd acts an employment agency for permanent roles and an employment business for temporary roles. The salary advertised is the bracket available for this position. The actual salary paid will be dependent on your level of experience, qualifications and skill set and will be decided by our client, the employer. Rise are not responsible or liable for any hiring decisions made by the end client. We are an equal opportunities company and welcome applications from all suitable candidates.