Job Role: Junior Accounts and Administration Assistant Working hours: 34 - 38 hours per week (Start times flexible) Pay: 10.00 - 12.71 Location: Stourbridge We're working on behalf of a well-established manufacturing business that's looking to recruit a Trainee Accounts & Administration Assistant - a rare opportunity to learn the ins and outs of a business from the ground up. This isn't your typical office role. You'll be at the heart of the operation, gaining exposure to multiple departments and learning "a bit of everything" - from finance and admin to stock control and day-to-day site support. The Role This is a hands-on, varied position where no two days will be the same. You'll be supporting the business across accounts, administration, and general operations, while building a solid foundation for a long-term career. You'll spend time getting to know the workforce, understanding the products, and becoming a key part of the team. Key Responsibilities Supporting accounts and finance administration Data entry and maintaining accurate records Creating and uploading invoices Assisting with payroll administration Raising purchase orders and ordering stock Distributing PPE to shop floor staff (You'll even get your own safety boots to go out into the works when required) Getting to know the team and supporting day-to-day operations Providing cover for colleagues during holidays and busy periods General administrative support across the business The Environment This role is based in a working foundry - it's busy, hands-on, and full of personality. There's a lot of banter and a strong team culture You'll be working with a wide variety of people across the business It can be dusty and industrial, so it's not suited to someone looking for a pristine office environment If you're someone who enjoys being around people, doesn't mind getting stuck in, and wants to be part of a real working operation, you'll fit right in. What We're Looking For A hardworking and committed individual Someone willing to learn and turn their hand to anything Strong reliability and a good work ethic Basic IT skills and willingness to learn systems A positive attitude and ability to work as part of a team Career Opportunity This isn't just a job, it is a long-term career opportunity. You'll be working alongside experienced professionals who know the business inside out and are keen to pass on their knowledge. The team is inclusive, supportive, and full of people who take pride in what they do. As time goes on, there will be genuine opportunities to progress into senior roles, especially as experienced team members eventually retire. For the right person, this could become a position for life. Click apply now to be considered for our Administration role. Oliver Rae is an Established Recruitment Business with offices based in Walsall and Halesowen. We supply Temporary and Permanent Staffing to Manufacturing, Engineering, Logistics and Food Production businesses. INDPERM
May 02, 2026
Full time
Job Role: Junior Accounts and Administration Assistant Working hours: 34 - 38 hours per week (Start times flexible) Pay: 10.00 - 12.71 Location: Stourbridge We're working on behalf of a well-established manufacturing business that's looking to recruit a Trainee Accounts & Administration Assistant - a rare opportunity to learn the ins and outs of a business from the ground up. This isn't your typical office role. You'll be at the heart of the operation, gaining exposure to multiple departments and learning "a bit of everything" - from finance and admin to stock control and day-to-day site support. The Role This is a hands-on, varied position where no two days will be the same. You'll be supporting the business across accounts, administration, and general operations, while building a solid foundation for a long-term career. You'll spend time getting to know the workforce, understanding the products, and becoming a key part of the team. Key Responsibilities Supporting accounts and finance administration Data entry and maintaining accurate records Creating and uploading invoices Assisting with payroll administration Raising purchase orders and ordering stock Distributing PPE to shop floor staff (You'll even get your own safety boots to go out into the works when required) Getting to know the team and supporting day-to-day operations Providing cover for colleagues during holidays and busy periods General administrative support across the business The Environment This role is based in a working foundry - it's busy, hands-on, and full of personality. There's a lot of banter and a strong team culture You'll be working with a wide variety of people across the business It can be dusty and industrial, so it's not suited to someone looking for a pristine office environment If you're someone who enjoys being around people, doesn't mind getting stuck in, and wants to be part of a real working operation, you'll fit right in. What We're Looking For A hardworking and committed individual Someone willing to learn and turn their hand to anything Strong reliability and a good work ethic Basic IT skills and willingness to learn systems A positive attitude and ability to work as part of a team Career Opportunity This isn't just a job, it is a long-term career opportunity. You'll be working alongside experienced professionals who know the business inside out and are keen to pass on their knowledge. The team is inclusive, supportive, and full of people who take pride in what they do. As time goes on, there will be genuine opportunities to progress into senior roles, especially as experienced team members eventually retire. For the right person, this could become a position for life. Click apply now to be considered for our Administration role. Oliver Rae is an Established Recruitment Business with offices based in Walsall and Halesowen. We supply Temporary and Permanent Staffing to Manufacturing, Engineering, Logistics and Food Production businesses. INDPERM
Role Overview A growing and well-established Managed Service Provider is looking to bring in an experienced 2nd to 3rd Line IT Support Engineer to join their high performing team. This is a great opportunity for someone who thrives in a fast-paced MSP environment and wants exposure to a wide range of technologies, clients, and project work. Your New Role You will be working across both support and project delivery, taking ownership of technical issues and contributing to the ongoing improvement of client environments. Your Responsibilities Administering and supporting Microsoft 365 including Exchange Online, SharePoint, Teams, Entra ID, Intune and compliance tools Managing Windows and macOS environments Delivering email migrations including cloud to cloud and hybrid setups Supporting and troubleshooting networking equipment including Cisco Meraki, HP Aruba, Ubiquiti and SonicWall Leading infrastructure projects from design through to deployment Using tools such as Datto RMM, Autotask and IT Glue to monitor and manage environments Supporting server, backup, security and firewall configurations Attending client sites when required for installs and issue resolution Working with video conferencing equipment Tech Environment Microsoft 365, Exchange Online, SharePoint, Google Workspace Intune, JAMF, Entra ID, Endpoint Manager Cisco Meraki, HP Aruba, Ubiquiti, SonicWall, VLANs Datto RMM, Autotask, IT Glue Security and backup tools including Bitdefender and SaaS protection platforms You Will Have Previous experience in an MSP environment Strong hands-on Microsoft 365 experience end to end Comfortable working across 2nd and 3rd line support Experience with migrations and hybrid environments Strong communication skills and ability to work with a range of users including senior stakeholders Someone proactive, reliable and able to take ownership of issues and projects Desirable Exposure to Linux Experience in creative or production environments
May 02, 2026
Full time
Role Overview A growing and well-established Managed Service Provider is looking to bring in an experienced 2nd to 3rd Line IT Support Engineer to join their high performing team. This is a great opportunity for someone who thrives in a fast-paced MSP environment and wants exposure to a wide range of technologies, clients, and project work. Your New Role You will be working across both support and project delivery, taking ownership of technical issues and contributing to the ongoing improvement of client environments. Your Responsibilities Administering and supporting Microsoft 365 including Exchange Online, SharePoint, Teams, Entra ID, Intune and compliance tools Managing Windows and macOS environments Delivering email migrations including cloud to cloud and hybrid setups Supporting and troubleshooting networking equipment including Cisco Meraki, HP Aruba, Ubiquiti and SonicWall Leading infrastructure projects from design through to deployment Using tools such as Datto RMM, Autotask and IT Glue to monitor and manage environments Supporting server, backup, security and firewall configurations Attending client sites when required for installs and issue resolution Working with video conferencing equipment Tech Environment Microsoft 365, Exchange Online, SharePoint, Google Workspace Intune, JAMF, Entra ID, Endpoint Manager Cisco Meraki, HP Aruba, Ubiquiti, SonicWall, VLANs Datto RMM, Autotask, IT Glue Security and backup tools including Bitdefender and SaaS protection platforms You Will Have Previous experience in an MSP environment Strong hands-on Microsoft 365 experience end to end Comfortable working across 2nd and 3rd line support Experience with migrations and hybrid environments Strong communication skills and ability to work with a range of users including senior stakeholders Someone proactive, reliable and able to take ownership of issues and projects Desirable Exposure to Linux Experience in creative or production environments
On behalf of our client, we are seeking to recruit someone as a C# Software Engineer for 12 months. As the C# Software Engineer, you will be joining a team who are integral in the development of weapon systems and system architectures, and as a result we have developed a capability supporting developments across the full product life cycle. The team integrate real products, models and synthetic environments to provide visualisations, demonstrations, verification & validation as well as training capability and support. Role: C# Software Engineer Pay : 65 per hour via Umbrella Contract: Monday- Friday, 37 Hours per week,12-month contract Location: Stevenage or Bristol IR35 Status : Inside Security Clearance: BPSS, SC to start, UK Eyes only project Responsibilities The role support the development of the worlds most advanced defence systems from the initial concept all the way through to in service support and training, using a range of simulation technologies, including digital twins and emulators. Working with Project Leads and Simulation Architects to design and develop simulation components as an end to end representation of a weapon System in a synthetic environment using C#, C++ and integration simulations, supporting a number of industry standards. You will work as part of a heterogeneous agile development team, made up of mixed discipline engineers working in synergy to develop simulations and representations of real equipment. Our approach to software development includes Configuration control Continuous Integration Continuous Delivery or Deployment. Unit testing and test driven development. Essential Requirements/Skills/Experience Proficient in C# / C++ Microsoft Visual Studio, Eclipse, Ability to work from high level/system view into technical detail. Excellent verbal, presentation and written communication skills Knowledge of using Microsoft Windows and Linux operating systems Desirable Requirements/Skills/Experience Distributed simulation standards / Protocols (DIS, HLA, DDS) and web services development (JavaScript, Node JS or similar) Military Communications, Datalinks and Interfaces such as 1553/1760 and Ethernet TCP/IP Practical knowledge of System integration principles and processes Other Work structure- 3-4 days on site & the rest remote (some programmes require fully onsite). First 3 months full time on site regardless. Potential travel - programme dependent & UK travel only. If you are interested in applying for this position and you meet the requirements, please send your updated CV to: Natalie Dalkin at Line Up Aviation Line Up Aviation has carved its own place in the recruitment of Aviation and Aerospace personnel all over the world for more than 30 years. We work with some of the industry's best known companies who demand the highest standard of applicants. " on Twitter for all of our latest vacancies, news and pictures from our busy UK Head Office. Interact with us using the tag at anytime! Thank you for your follow!"
May 02, 2026
Contractor
On behalf of our client, we are seeking to recruit someone as a C# Software Engineer for 12 months. As the C# Software Engineer, you will be joining a team who are integral in the development of weapon systems and system architectures, and as a result we have developed a capability supporting developments across the full product life cycle. The team integrate real products, models and synthetic environments to provide visualisations, demonstrations, verification & validation as well as training capability and support. Role: C# Software Engineer Pay : 65 per hour via Umbrella Contract: Monday- Friday, 37 Hours per week,12-month contract Location: Stevenage or Bristol IR35 Status : Inside Security Clearance: BPSS, SC to start, UK Eyes only project Responsibilities The role support the development of the worlds most advanced defence systems from the initial concept all the way through to in service support and training, using a range of simulation technologies, including digital twins and emulators. Working with Project Leads and Simulation Architects to design and develop simulation components as an end to end representation of a weapon System in a synthetic environment using C#, C++ and integration simulations, supporting a number of industry standards. You will work as part of a heterogeneous agile development team, made up of mixed discipline engineers working in synergy to develop simulations and representations of real equipment. Our approach to software development includes Configuration control Continuous Integration Continuous Delivery or Deployment. Unit testing and test driven development. Essential Requirements/Skills/Experience Proficient in C# / C++ Microsoft Visual Studio, Eclipse, Ability to work from high level/system view into technical detail. Excellent verbal, presentation and written communication skills Knowledge of using Microsoft Windows and Linux operating systems Desirable Requirements/Skills/Experience Distributed simulation standards / Protocols (DIS, HLA, DDS) and web services development (JavaScript, Node JS or similar) Military Communications, Datalinks and Interfaces such as 1553/1760 and Ethernet TCP/IP Practical knowledge of System integration principles and processes Other Work structure- 3-4 days on site & the rest remote (some programmes require fully onsite). First 3 months full time on site regardless. Potential travel - programme dependent & UK travel only. If you are interested in applying for this position and you meet the requirements, please send your updated CV to: Natalie Dalkin at Line Up Aviation Line Up Aviation has carved its own place in the recruitment of Aviation and Aerospace personnel all over the world for more than 30 years. We work with some of the industry's best known companies who demand the highest standard of applicants. " on Twitter for all of our latest vacancies, news and pictures from our busy UK Head Office. Interact with us using the tag at anytime! Thank you for your follow!"
Job Title: Principal Mechanical Engineer Location: Rochester; Kent: Onsite Salary: Up to £65,000 depending on experience Who we are: Join BAE Systems and you'll be part of something bigger. As a valued member of our global colleague network, you'll bring your unique skills and perspectives to help pioneer progress and protect what matters most. You'll be trusted to play your part in delivering the advanced, technology-led defence, aerospace and security solutions of tomorrow, shaping a safer future, for all of us. From the depths of the ocean, to the far reaches of space, there's no limit to where a career at BAE Systems could take you. Job Description: The main duty of this role is to provide expert Mechanical Engineering support for the design and development of new innovative designs through to fault finding, diagnostics and salvage of existing products. As a Principal Mechanical Engineer, you will have the ability to lead innovation and provide technical direction to other Engineers/Technicians to develop ideas into a detailed scheme supported by calculations and reports to demonstrate compliance with requirements, which will include support to risk reduction and qualification testing as required. The expectation of a Principal Mechanical Engineer is to provide a high quality service to customers, on time and within budget with minimum management oversight, and be able to present the design detail directly to our high profile customers. Core duties: Using product knowledge and advanced engineering understanding, generate design concepts and solutions from first principals to meet project and customer requirements Prepare and present concise Mechanical Development Plans, Design Scheme Data Packs and other engineering detail for internal review and in a customer forum Taking a Design Authority role in checking and approving datasets (drawings/MBD) to ensure they correct to required standards, that they reflect design intent correctly, and that they adequately define parts for manufacture and inspection Work collaboratively across all engineering disciplines, liaising with technical specialists as required, and supporting Team Leads , Projects and Mechanical Functional Managers in preparing estimates for future design activities Complete Design Authority level checks on the work of other mechanical engineers, which will include designs, design data, hand calculations and technical reports Understand and provide governance on the adherence of Engineers and Technicians to departmental and company policies and procedures It may be required to travel and represent the company, providing presentations, carrying out product installation surveys etc ., away from the Rochester home base Essential Skills: Degree qualified in Mechanical Engineering, or related discipline, or an equivalent combination of other qualifications and experience. Meet the requirements of UK-SPEC at the Chartered Engineer Level Comprehensive experience of the full product design lifecycle, from concept through to production, within an engineering environment Experience in preparing technical datasets (drawings/MBD) and design review datasets Competence in the use of CAD tools to prepare design models, along with proficiency in the CREO CAD system and experience of Teamcenter, DOORS and JIRA, would be advantageous Experience in leading a mechanical, or cross-discipline, design team The Service & Industrialisation (S&I) Team: The team provides engineering support to the wider Service organisation, working closely with Hardware and Systems Engineering teams. The Mechanical Team comprises seven engineers ranging from Apprentice to Principal level. We support a wide portfolio of products across lifecycles exceeding 25 years, ensuring equipment remains safe, reliable, and operational throughout its service life. Our role focuses on keeping aircraft flying by resolving obsolescence issues, carrying out redesign and modification work, and developing repair solutions. This long-term support is critical to maintaining customer capability, meeting airworthiness requirements, and ensuring continued operational availability. Why BAE Systems? Here you'll build a career with purpose and limitless possibilities. With lifelong learning and meaningful work, this is a place where you can grow your career with confidence and be empowered to be your best. You'll be recognised for your contribution and enjoy rewards tailored to what's most important to you and your family, support for your financial and personal wellbeing, as well as a balanced lifestyle. In an environment embracing sustainable ways of working and with a strong sense of shared purpose, our supportive culture is a place you can feel you belong and proud of the difference you make. A place where everyone can thrive: We're committed to building an inclusive workplace where everyone feels valued and supported. We know that a diversity of backgrounds, perspectives and experiences strengthens our teams and is vital to the work we do. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date: 15th May 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible.
May 02, 2026
Full time
Job Title: Principal Mechanical Engineer Location: Rochester; Kent: Onsite Salary: Up to £65,000 depending on experience Who we are: Join BAE Systems and you'll be part of something bigger. As a valued member of our global colleague network, you'll bring your unique skills and perspectives to help pioneer progress and protect what matters most. You'll be trusted to play your part in delivering the advanced, technology-led defence, aerospace and security solutions of tomorrow, shaping a safer future, for all of us. From the depths of the ocean, to the far reaches of space, there's no limit to where a career at BAE Systems could take you. Job Description: The main duty of this role is to provide expert Mechanical Engineering support for the design and development of new innovative designs through to fault finding, diagnostics and salvage of existing products. As a Principal Mechanical Engineer, you will have the ability to lead innovation and provide technical direction to other Engineers/Technicians to develop ideas into a detailed scheme supported by calculations and reports to demonstrate compliance with requirements, which will include support to risk reduction and qualification testing as required. The expectation of a Principal Mechanical Engineer is to provide a high quality service to customers, on time and within budget with minimum management oversight, and be able to present the design detail directly to our high profile customers. Core duties: Using product knowledge and advanced engineering understanding, generate design concepts and solutions from first principals to meet project and customer requirements Prepare and present concise Mechanical Development Plans, Design Scheme Data Packs and other engineering detail for internal review and in a customer forum Taking a Design Authority role in checking and approving datasets (drawings/MBD) to ensure they correct to required standards, that they reflect design intent correctly, and that they adequately define parts for manufacture and inspection Work collaboratively across all engineering disciplines, liaising with technical specialists as required, and supporting Team Leads , Projects and Mechanical Functional Managers in preparing estimates for future design activities Complete Design Authority level checks on the work of other mechanical engineers, which will include designs, design data, hand calculations and technical reports Understand and provide governance on the adherence of Engineers and Technicians to departmental and company policies and procedures It may be required to travel and represent the company, providing presentations, carrying out product installation surveys etc ., away from the Rochester home base Essential Skills: Degree qualified in Mechanical Engineering, or related discipline, or an equivalent combination of other qualifications and experience. Meet the requirements of UK-SPEC at the Chartered Engineer Level Comprehensive experience of the full product design lifecycle, from concept through to production, within an engineering environment Experience in preparing technical datasets (drawings/MBD) and design review datasets Competence in the use of CAD tools to prepare design models, along with proficiency in the CREO CAD system and experience of Teamcenter, DOORS and JIRA, would be advantageous Experience in leading a mechanical, or cross-discipline, design team The Service & Industrialisation (S&I) Team: The team provides engineering support to the wider Service organisation, working closely with Hardware and Systems Engineering teams. The Mechanical Team comprises seven engineers ranging from Apprentice to Principal level. We support a wide portfolio of products across lifecycles exceeding 25 years, ensuring equipment remains safe, reliable, and operational throughout its service life. Our role focuses on keeping aircraft flying by resolving obsolescence issues, carrying out redesign and modification work, and developing repair solutions. This long-term support is critical to maintaining customer capability, meeting airworthiness requirements, and ensuring continued operational availability. Why BAE Systems? Here you'll build a career with purpose and limitless possibilities. With lifelong learning and meaningful work, this is a place where you can grow your career with confidence and be empowered to be your best. You'll be recognised for your contribution and enjoy rewards tailored to what's most important to you and your family, support for your financial and personal wellbeing, as well as a balanced lifestyle. In an environment embracing sustainable ways of working and with a strong sense of shared purpose, our supportive culture is a place you can feel you belong and proud of the difference you make. A place where everyone can thrive: We're committed to building an inclusive workplace where everyone feels valued and supported. We know that a diversity of backgrounds, perspectives and experiences strengthens our teams and is vital to the work we do. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date: 15th May 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible.
IT Deployment Support (Contract - 1 Month) Location: Primary: Andover Additional: Occasional travel to Barton Stacey Contract Length: Start Date: Monday, 25th May 2026 Approximately 1 month Working Hours: 8:30am - 5:00pm, Monday to Friday 45-minute unpaid lunch break Are you ready to take on an exciting challenge in the world of IT? We are on the lookout for an enthusiastic IT SUpport to join our client's team for a short-term contract! This is your chance to make a significant impact as we embark on a business-wide laptop upgrade programme. What You'll Be Doing: As an IT Deployment Engineer, you will play a vital role in upgrading from Windows 23H2 to the latest Windows 25H2 across 63 endpoint devices. Your expertise will help streamline the deployment process, ensuring a smooth transition with minimal disruption for users. Here's a glimpse of your key responsibilities: Rollout Windows 25H2 across 63 endpoint devices Utilise Clonezilla imaging software for efficient device deployment Create, test, and optimise standardised Windows images tailored to hardware configurations Deploy and implement images to laptops seamlessly Create local and domain user accounts and profiles Join devices to the Active Directory domain Enroll devices into Intune and Microsoft Defender for Endpoint Install additional approved software as required Create backup images for deployed devices Ensure device encryption aligns with company security standards Update IT asset and deployment records accurately Test systems and complete handover to end users Required Skills & Experience: Previous experience in PC/Desktop Support Strong understanding of Domain-joined PCs Proficient knowledge of Active Directory Experience deploying and configuring Windows operating systems Desirable Skills: Familiarity with Clonezilla or similar imaging tools Knowledge of Intune , endpoint security, and device management tools Why Join Us? This is a hands-on, site-based role perfect for someone who enjoys delivering a structured rollout programme while maintaining an excellent end-user experience. You will be part of a dynamic team, working to tight timescales and ensuring that our clients' needs are met with utmost professionalism. If you're ready to make a difference and take on this exciting opportunity, we want to hear from you! How to Apply: To apply, please send your CV and a brief cover letter outlining your relevant experience. Don't miss out on this fantastic opportunity to be part of a vital IT upgrade project! Join us in making technology work for everyone. Apply today! Adecco is a disability-confident employer. It is important to us that we run an inclusive and accessible recruitment process to support candidates of all backgrounds and all abilities to apply. Adecco is committed to building a supportive environment for you to explore the next steps in your career. If you require reasonable adjustments at any stage, please let us know and we will be happy to support you. Adecco acts as an employment agency for permanent recruitment and an employment business for the supply of temporary workers. The Adecco Group UK & Ireland is an Equal Opportunities Employer. By applying for this role your details will be submitted to Adecco. Our Candidate Privacy Information Statement explaining how we will use your information is available on our website.
May 02, 2026
Seasonal
IT Deployment Support (Contract - 1 Month) Location: Primary: Andover Additional: Occasional travel to Barton Stacey Contract Length: Start Date: Monday, 25th May 2026 Approximately 1 month Working Hours: 8:30am - 5:00pm, Monday to Friday 45-minute unpaid lunch break Are you ready to take on an exciting challenge in the world of IT? We are on the lookout for an enthusiastic IT SUpport to join our client's team for a short-term contract! This is your chance to make a significant impact as we embark on a business-wide laptop upgrade programme. What You'll Be Doing: As an IT Deployment Engineer, you will play a vital role in upgrading from Windows 23H2 to the latest Windows 25H2 across 63 endpoint devices. Your expertise will help streamline the deployment process, ensuring a smooth transition with minimal disruption for users. Here's a glimpse of your key responsibilities: Rollout Windows 25H2 across 63 endpoint devices Utilise Clonezilla imaging software for efficient device deployment Create, test, and optimise standardised Windows images tailored to hardware configurations Deploy and implement images to laptops seamlessly Create local and domain user accounts and profiles Join devices to the Active Directory domain Enroll devices into Intune and Microsoft Defender for Endpoint Install additional approved software as required Create backup images for deployed devices Ensure device encryption aligns with company security standards Update IT asset and deployment records accurately Test systems and complete handover to end users Required Skills & Experience: Previous experience in PC/Desktop Support Strong understanding of Domain-joined PCs Proficient knowledge of Active Directory Experience deploying and configuring Windows operating systems Desirable Skills: Familiarity with Clonezilla or similar imaging tools Knowledge of Intune , endpoint security, and device management tools Why Join Us? This is a hands-on, site-based role perfect for someone who enjoys delivering a structured rollout programme while maintaining an excellent end-user experience. You will be part of a dynamic team, working to tight timescales and ensuring that our clients' needs are met with utmost professionalism. If you're ready to make a difference and take on this exciting opportunity, we want to hear from you! How to Apply: To apply, please send your CV and a brief cover letter outlining your relevant experience. Don't miss out on this fantastic opportunity to be part of a vital IT upgrade project! Join us in making technology work for everyone. Apply today! Adecco is a disability-confident employer. It is important to us that we run an inclusive and accessible recruitment process to support candidates of all backgrounds and all abilities to apply. Adecco is committed to building a supportive environment for you to explore the next steps in your career. If you require reasonable adjustments at any stage, please let us know and we will be happy to support you. Adecco acts as an employment agency for permanent recruitment and an employment business for the supply of temporary workers. The Adecco Group UK & Ireland is an Equal Opportunities Employer. By applying for this role your details will be submitted to Adecco. Our Candidate Privacy Information Statement explaining how we will use your information is available on our website.
Commercial Gas Installation Engineer Projects Division £45,000 £50,000 Basic + Overtime (OTE £70,000+) National Role Fully Remote UK Travel Required We re proud to be partnering with a reputable FM service provider to recruit a highly skilled Commercial Gas Installation Engineer to join their growing Projects Team. This is an exciting opportunity for an experienced and hands-on engineer looking to step into a dynamic, client-facing role delivering large-scale commercial gas and HVAC installations across the UK. If you enjoy variety, autonomy, and working in a fast-paced, project-led environment this role offers both challenge and long-term career progression. The Opportunity As part of a specialist Projects division, you ll play a key role in the surveying, installation, and commissioning of commercial gas systems nationwide. This is a fully remote position with frequent travel and overnight stays, supporting project delivery wherever needed. You ll be working directly with clients, project managers, and engineering teams, ensuring installations are delivered safely, efficiently, and to the highest standards. What You ll Be Doing Delivering large-scale commercial gas installations in line with industry regulations Installing and commissioning a wide range of systems including boilers, warm air heaters, AHUs, and pipework systems Producing commissioning reports, technical documentation, and site calculations Supporting client relationships and attending project meetings Collaborating with internal teams and subcontractors to ensure smooth project delivery Mentoring junior engineers and supporting team development Identifying additional work opportunities and assisting with project scoping What We re Looking For Fully qualified Commercial Gas Engineer with a valid CSCS card Extensive experience working on construction sites and commercial installations Strong technical knowledge across HVAC and gas systems IPAF and Asbestos Awareness certified Full UK driving licence Confident working independently in a client-facing role Desirable: OFTEC or LPG qualifications What s On Offer £45,000 £50,000 basic salary + significant overtime (OTE £70,000+) 33 days holiday (including bank holidays) + birthday off Private medical insurance (no excess) Dental & optical cashback scheme Life assurance (4x salary) Enhanced family leave policies Ongoing professional development and training Comprehensive wellbeing support including EAP and virtual GP access Why Apply? This is a fantastic opportunity to join a well-established and forward-thinking FM provider where you ll have real impact on project delivery. You ll gain exposure to high-profile commercial work, develop your technical expertise, and progress within a supportive and growing business. Interested? Apply now or get in touch to learn more about this opportunity and how it could be the next step in your career.
May 02, 2026
Full time
Commercial Gas Installation Engineer Projects Division £45,000 £50,000 Basic + Overtime (OTE £70,000+) National Role Fully Remote UK Travel Required We re proud to be partnering with a reputable FM service provider to recruit a highly skilled Commercial Gas Installation Engineer to join their growing Projects Team. This is an exciting opportunity for an experienced and hands-on engineer looking to step into a dynamic, client-facing role delivering large-scale commercial gas and HVAC installations across the UK. If you enjoy variety, autonomy, and working in a fast-paced, project-led environment this role offers both challenge and long-term career progression. The Opportunity As part of a specialist Projects division, you ll play a key role in the surveying, installation, and commissioning of commercial gas systems nationwide. This is a fully remote position with frequent travel and overnight stays, supporting project delivery wherever needed. You ll be working directly with clients, project managers, and engineering teams, ensuring installations are delivered safely, efficiently, and to the highest standards. What You ll Be Doing Delivering large-scale commercial gas installations in line with industry regulations Installing and commissioning a wide range of systems including boilers, warm air heaters, AHUs, and pipework systems Producing commissioning reports, technical documentation, and site calculations Supporting client relationships and attending project meetings Collaborating with internal teams and subcontractors to ensure smooth project delivery Mentoring junior engineers and supporting team development Identifying additional work opportunities and assisting with project scoping What We re Looking For Fully qualified Commercial Gas Engineer with a valid CSCS card Extensive experience working on construction sites and commercial installations Strong technical knowledge across HVAC and gas systems IPAF and Asbestos Awareness certified Full UK driving licence Confident working independently in a client-facing role Desirable: OFTEC or LPG qualifications What s On Offer £45,000 £50,000 basic salary + significant overtime (OTE £70,000+) 33 days holiday (including bank holidays) + birthday off Private medical insurance (no excess) Dental & optical cashback scheme Life assurance (4x salary) Enhanced family leave policies Ongoing professional development and training Comprehensive wellbeing support including EAP and virtual GP access Why Apply? This is a fantastic opportunity to join a well-established and forward-thinking FM provider where you ll have real impact on project delivery. You ll gain exposure to high-profile commercial work, develop your technical expertise, and progress within a supportive and growing business. Interested? Apply now or get in touch to learn more about this opportunity and how it could be the next step in your career.
Job Title: Fabricator - Plater Location: Glasgow, Govan and Scotstoun, Onsite - Must be able to attend a recruitment day in Glasgow Salary: £38,662 - plus 33% shift allowance where applicable Shift Pattern: Days - Mon-Thurs, 07:00-16:30, Nights - Mon-Thurs 20:30-06:00, Weekends - Fri-Sun, 07:00-19:30 Requirements: Modern Apprenticeship / Trade Papers must be provided when submitting your application Who we are: Join BAE Systems and you'll be part of something bigger. As a valued member of our global colleague network, you'll bring your unique skills and perspectives to help pioneer progress and protect what matters most. You'll be trusted to play your part in delivering the advanced, technology-led defence, aerospace and security solutions of tomorrow, shaping a safer future, for all of us. From the depths of the ocean, to the far reaches of space, there's no limit to where a career at BAE Systems could take you. What you'll be doing: Interpret engineering drawings, mark off materials and prepare plate using methods such as oxy fuel cutting and hand grinding Assemble ship structures - including shell, decks, bulkheads, frames and longitudinals - ensuring all components are accurately fitted, faired and tack welded Fabricate ship items such as seats, ladders, false flooring, panels, hatches, watertight doors, equipment seats and flooring systems Form materials using machine tools, including rolling, flanging and cutting equipment such as guillotines, croppers and mechanical saws Essential skills: You are required to hold a Modern Apprenticeship certificate also known as Trade Papers (you will be required to provide these papers on application and in person) and relevant mechanical qualifications (e.g., SVQ3, City & Guilds, or equivalent) Demonstrating up to date fabrication knowledge and hands on experience in construction or manufacturing environments Understanding and applying core manufacturing processes and completing tack welding to required safety and quality standards Demonstrate you are able to operate oxy fuel and/or plasma cutting equipment confidently and responsibly You will follow SHE principles and risk assessment requirements in all working conditions You'll have experience of working safely in confined spaces or at height, supported by relevant safety certifications The Fabricator Team: BAE Systems designs and builds world class naval ships and our Fabricator Platers play a vital role in delivering the Type 26 frigates. Working in teams of 6-12, you'll apply SVQ3 level training and marine fabrication experience to produce high quality steelwork that supports essential defence projects. Why BAE Systems? Here you'll build a career with purpose and limitless possibilities. With lifelong learning and meaningful work, this is a place where you can grow your career with confidence and be empowered to be your best. You'll be recognised for your contribution and enjoy rewards tailored to what's most important to you and your family, support for your financial and personal wellbeing, as well as a balanced lifestyle. In an environment embracing sustainable ways of working and with a strong sense of shared purpose, our supportive culture is a place you can feel you belong and proud of the difference you make. A place where everyone can thrive: We're committed to building an inclusive workplace where everyone feels valued and supported. We know that a diversity of backgrounds, perspectives and experiences strengthens our teams and is vital to the work we do. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date: 15th May 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible.
May 02, 2026
Full time
Job Title: Fabricator - Plater Location: Glasgow, Govan and Scotstoun, Onsite - Must be able to attend a recruitment day in Glasgow Salary: £38,662 - plus 33% shift allowance where applicable Shift Pattern: Days - Mon-Thurs, 07:00-16:30, Nights - Mon-Thurs 20:30-06:00, Weekends - Fri-Sun, 07:00-19:30 Requirements: Modern Apprenticeship / Trade Papers must be provided when submitting your application Who we are: Join BAE Systems and you'll be part of something bigger. As a valued member of our global colleague network, you'll bring your unique skills and perspectives to help pioneer progress and protect what matters most. You'll be trusted to play your part in delivering the advanced, technology-led defence, aerospace and security solutions of tomorrow, shaping a safer future, for all of us. From the depths of the ocean, to the far reaches of space, there's no limit to where a career at BAE Systems could take you. What you'll be doing: Interpret engineering drawings, mark off materials and prepare plate using methods such as oxy fuel cutting and hand grinding Assemble ship structures - including shell, decks, bulkheads, frames and longitudinals - ensuring all components are accurately fitted, faired and tack welded Fabricate ship items such as seats, ladders, false flooring, panels, hatches, watertight doors, equipment seats and flooring systems Form materials using machine tools, including rolling, flanging and cutting equipment such as guillotines, croppers and mechanical saws Essential skills: You are required to hold a Modern Apprenticeship certificate also known as Trade Papers (you will be required to provide these papers on application and in person) and relevant mechanical qualifications (e.g., SVQ3, City & Guilds, or equivalent) Demonstrating up to date fabrication knowledge and hands on experience in construction or manufacturing environments Understanding and applying core manufacturing processes and completing tack welding to required safety and quality standards Demonstrate you are able to operate oxy fuel and/or plasma cutting equipment confidently and responsibly You will follow SHE principles and risk assessment requirements in all working conditions You'll have experience of working safely in confined spaces or at height, supported by relevant safety certifications The Fabricator Team: BAE Systems designs and builds world class naval ships and our Fabricator Platers play a vital role in delivering the Type 26 frigates. Working in teams of 6-12, you'll apply SVQ3 level training and marine fabrication experience to produce high quality steelwork that supports essential defence projects. Why BAE Systems? Here you'll build a career with purpose and limitless possibilities. With lifelong learning and meaningful work, this is a place where you can grow your career with confidence and be empowered to be your best. You'll be recognised for your contribution and enjoy rewards tailored to what's most important to you and your family, support for your financial and personal wellbeing, as well as a balanced lifestyle. In an environment embracing sustainable ways of working and with a strong sense of shared purpose, our supportive culture is a place you can feel you belong and proud of the difference you make. A place where everyone can thrive: We're committed to building an inclusive workplace where everyone feels valued and supported. We know that a diversity of backgrounds, perspectives and experiences strengthens our teams and is vital to the work we do. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date: 15th May 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible.
Production Operative / Assembler Location: Wokingham, Berkshire, RG41 2QY Salary: Competitive, DOE + Excellent Benefits! Contract: Full Time (37.5hours) Permanent Benefits: Permanent position (full time and part time roles available), 25 days annual holiday entitlement, plus bank holidays, Employer contributed pension scheme, Competitive salaries for a 37.5-hour week, Excellent overtime rates, Cycle to work scheme, progression & development opportunities, Training provided, On-site parking, Friendly environment in a family run business Surelock McGill is a world leader in high security locking systems that protect the nation from terrorists and other ballistic and blast threats. As a family run business for over 60 years we have a busy team that we are looking to expand and have a variety of full and part time production roles available. Working as a Production Operative / Assembler within the production team, you will help ensure products are manufactured, assembled, inspected and shipped efficiently with minimum waste and to the highest levels of consistent quality. You will be responsible for: • Carry out a variety of required production operations or supported tasks in line with Company requirements including but not limited to : Production and assembly of components, Operating various pieces of factory machinery and equipment by having a flexible approach, Inspection of final product, Packing and label checking finished products • Take ownership and responsibility for the area you are working in or task you are performing. • Follow all Standard Operating procedures and help review when required. • Ensure that you are aware of the Company Health, Safety and Environmental policies and procedures and that you adhere to them at all times • Maintain a positive working atmosphere by acting and communicating in a manner that promotes cooperation with colleagues • Supporting the team to ensure no production down time, that customers orders go out on time and that quality of the final products are of the highest quality In order to be successful in this role you should have: • Ideally have worked in the manufacturing industry before but not essential as training will be provided • Experience with a hands-on role or interested in engineering and not afraid of manual handling • Excellent attendance and time keeping is essential. Those who demonstrate this and show willing will be rewarded with development opportunities. • Can-do attitude, self-motivated & keen to contribute to the success of the team If you feel you have the necessary skills and experience to be successful in this role click on APPLY today! No Agencies Please.
May 02, 2026
Full time
Production Operative / Assembler Location: Wokingham, Berkshire, RG41 2QY Salary: Competitive, DOE + Excellent Benefits! Contract: Full Time (37.5hours) Permanent Benefits: Permanent position (full time and part time roles available), 25 days annual holiday entitlement, plus bank holidays, Employer contributed pension scheme, Competitive salaries for a 37.5-hour week, Excellent overtime rates, Cycle to work scheme, progression & development opportunities, Training provided, On-site parking, Friendly environment in a family run business Surelock McGill is a world leader in high security locking systems that protect the nation from terrorists and other ballistic and blast threats. As a family run business for over 60 years we have a busy team that we are looking to expand and have a variety of full and part time production roles available. Working as a Production Operative / Assembler within the production team, you will help ensure products are manufactured, assembled, inspected and shipped efficiently with minimum waste and to the highest levels of consistent quality. You will be responsible for: • Carry out a variety of required production operations or supported tasks in line with Company requirements including but not limited to : Production and assembly of components, Operating various pieces of factory machinery and equipment by having a flexible approach, Inspection of final product, Packing and label checking finished products • Take ownership and responsibility for the area you are working in or task you are performing. • Follow all Standard Operating procedures and help review when required. • Ensure that you are aware of the Company Health, Safety and Environmental policies and procedures and that you adhere to them at all times • Maintain a positive working atmosphere by acting and communicating in a manner that promotes cooperation with colleagues • Supporting the team to ensure no production down time, that customers orders go out on time and that quality of the final products are of the highest quality In order to be successful in this role you should have: • Ideally have worked in the manufacturing industry before but not essential as training will be provided • Experience with a hands-on role or interested in engineering and not afraid of manual handling • Excellent attendance and time keeping is essential. Those who demonstrate this and show willing will be rewarded with development opportunities. • Can-do attitude, self-motivated & keen to contribute to the success of the team If you feel you have the necessary skills and experience to be successful in this role click on APPLY today! No Agencies Please.
SOC Lead 6 months Bath - hybrid x3 days onsite x2 remote Active SC/DV clearance required 700 per day outside IR35 The SOC Lead - Threat Hunting & Investigations is responsible for leading advanced threat detection, proactive threat hunting, and complex security investigations across the enterprise. This role focuses on identifying unknown threats, coordinating deep-dive investigations, and elevating the maturity of SOC investigative and hunting capabilities. The role combines technical leadership, hands-on expertise, and mentorship of analysts. Key Responsibilities Threat Hunting Lead proactive, hypothesis-driven threat hunting activities across endpoint, network, cloud, identity, and SaaS environments Develop and maintain threat hunting playbooks aligned to MITRE ATT&CK techniques Identify stealthy, low-and-slow, and novel attack patterns not detected by automated controls Translate threat intelligence into actionable hunt hypotheses Continuously refine detection logic based on hunt outcomes and emerging threats Investigations & Incident Response Lead complex and high-severity security investigations from triage through containment and remediation Act as the technical escalation point for advanced SOC investigations Conduct root cause analysis and attacker kill-chain reconstruction Produce clear, defensible investigation documentation suitable for executive, legal, and regulatory audiences Coordinate incident response activities with IR, IT, Legal, Risk, and external partners as required SOC Technical Leadership Define investigation standards, workflows, and quality benchmarks Mentor and upskill SOC analysts in hunting methodologies and investigative techniques Review and improve alert fidelity, detection coverage, and response effectiveness Provide technical oversight for tooling such as SIEM, EDR/XDR, NDR, SOAR, and cloud-native security platforms Detection Engineering & Improvement Collaborate with detection engineers to convert hunt findings into new or improved detections Identify visibility gaps and recommend logging, telemetry, and tooling improvements Validate detection performance through purple team activities and simulation Threat Intelligence & Collaboration Consume and operationalise internal and external threat intelligence Maintain awareness of attacker tactics, tools, and campaigns relevant to the organisation Act as a key interface between SOC, Threat Intel, Red Team, and Vulnerability Management Reporting & Metrics Track and report on hunt coverage, outcomes, dwell time, MTTR, and investigation quality Provide regular insights to senior leadership on threat trends and risk posture Required Skills & Experience Technical Experience 7+ years in Security Operations, Threat Hunting, or Incident Response Proven experience leading investigations involving advanced persistent threats, insider threats, or targeted attacks Strong hands-on expertise with: SIEM platforms (e.g. Sentinel, Splunk, Elastic) EDR/XDR solutions (e.g. Defender, CrowdStrike, SentinelOne) Network and cloud security telemetry Strong understanding of: MITRE ATT&CK Windows, Linux, and cloud attack techniques Malware behaviours, credential abuse, lateral movement, and persistence mechanisms Leadership & Soft Skills Demonstrated ability to lead and mentor technical teams Strong investigative mindset with attention to detail Excellent written and verbal communication skills Ability to translate technical findings into business and risk context Desirable Skills Experience with detection engineering or SOAR automation Purple team or red team collaboration experience Forensic analysis experience (memory, disk, network) Exposure to regulatory environments (e.g. ISO 27001, NIST, GDPR) Apply now to be part of this impactful opportunity!
May 02, 2026
Contractor
SOC Lead 6 months Bath - hybrid x3 days onsite x2 remote Active SC/DV clearance required 700 per day outside IR35 The SOC Lead - Threat Hunting & Investigations is responsible for leading advanced threat detection, proactive threat hunting, and complex security investigations across the enterprise. This role focuses on identifying unknown threats, coordinating deep-dive investigations, and elevating the maturity of SOC investigative and hunting capabilities. The role combines technical leadership, hands-on expertise, and mentorship of analysts. Key Responsibilities Threat Hunting Lead proactive, hypothesis-driven threat hunting activities across endpoint, network, cloud, identity, and SaaS environments Develop and maintain threat hunting playbooks aligned to MITRE ATT&CK techniques Identify stealthy, low-and-slow, and novel attack patterns not detected by automated controls Translate threat intelligence into actionable hunt hypotheses Continuously refine detection logic based on hunt outcomes and emerging threats Investigations & Incident Response Lead complex and high-severity security investigations from triage through containment and remediation Act as the technical escalation point for advanced SOC investigations Conduct root cause analysis and attacker kill-chain reconstruction Produce clear, defensible investigation documentation suitable for executive, legal, and regulatory audiences Coordinate incident response activities with IR, IT, Legal, Risk, and external partners as required SOC Technical Leadership Define investigation standards, workflows, and quality benchmarks Mentor and upskill SOC analysts in hunting methodologies and investigative techniques Review and improve alert fidelity, detection coverage, and response effectiveness Provide technical oversight for tooling such as SIEM, EDR/XDR, NDR, SOAR, and cloud-native security platforms Detection Engineering & Improvement Collaborate with detection engineers to convert hunt findings into new or improved detections Identify visibility gaps and recommend logging, telemetry, and tooling improvements Validate detection performance through purple team activities and simulation Threat Intelligence & Collaboration Consume and operationalise internal and external threat intelligence Maintain awareness of attacker tactics, tools, and campaigns relevant to the organisation Act as a key interface between SOC, Threat Intel, Red Team, and Vulnerability Management Reporting & Metrics Track and report on hunt coverage, outcomes, dwell time, MTTR, and investigation quality Provide regular insights to senior leadership on threat trends and risk posture Required Skills & Experience Technical Experience 7+ years in Security Operations, Threat Hunting, or Incident Response Proven experience leading investigations involving advanced persistent threats, insider threats, or targeted attacks Strong hands-on expertise with: SIEM platforms (e.g. Sentinel, Splunk, Elastic) EDR/XDR solutions (e.g. Defender, CrowdStrike, SentinelOne) Network and cloud security telemetry Strong understanding of: MITRE ATT&CK Windows, Linux, and cloud attack techniques Malware behaviours, credential abuse, lateral movement, and persistence mechanisms Leadership & Soft Skills Demonstrated ability to lead and mentor technical teams Strong investigative mindset with attention to detail Excellent written and verbal communication skills Ability to translate technical findings into business and risk context Desirable Skills Experience with detection engineering or SOAR automation Purple team or red team collaboration experience Forensic analysis experience (memory, disk, network) Exposure to regulatory environments (e.g. ISO 27001, NIST, GDPR) Apply now to be part of this impactful opportunity!
Job Title: Principal Engineer - Electrical Engineering (HV) Location: Barrow - Hybrid - 3 days per week on site (Dependent on business needs) We offer a range of hybrid and flexible working arrangements - please speak to your recruiter about the options for this particular role Salary: £45,628 - £61,500 (Commensurate with skills and experience) Who we are: Join BAE Systems and you'll be part of something bigger. As a valued member of our global colleague network, you'll bring your unique skills and perspectives to help pioneer progress and protect what matters most. You'll be trusted to play your part in delivering the advanced, technology-led defence, aerospace and security solutions of tomorrow, shaping a safer future, for all of us. From the depths of the ocean, to the far reaches of space, there's no limit to where a career at BAE Systems could take you. Job Description: As a Principal Engineer -Electrical Engineering (HV) you will be part of the Site Specialist Engineering Electrical team providing specialist support to the business with respect to setting electrical standards and requirements for equipment/systems/facilities in accordance with legislation/processes. You will be Point of contact for High Voltage issues regarding standards for site electrical systems and support a wide range of electrical disciplines, with opportunities to learn and develop in LV, HV, C&I and Communications, each day varies with the chance to problem solve and drive innovative solutions from your experiences. Core duties: You'll define site standards, processes and technical requirements in terms of electrical engineering for equipment, systems and facilities You'll conduct reviews and assessments of design proposals to ensure that the equipment/facilities are designed, constructed, commissioned, operated and maintained in accordance with the appropriate processes and standards You'll produce technical documentation and reports You'll have input into problem solving, engineering issues relating to the subject matter You'll be point of contact for High Voltage issues regarding standards for site electrical systems You will chair and lead improvements (policy, equipment, capabilities) with site risk cells set up to ensure compliance with relevant regulations Essential Skills: Electrical engineer with demonstratable High Voltage engineering experience of 11kV systems Demonstrable experience of working in an industrial engineering environment with familiarity of commercial standards Degree qualified in electrical engineering or equivalent (e.g. HND with relevant experience) Registered with an Engineering professional institute and have the ability to achieve chartered status Demonstrable experience of leadership within an engineering environment and familiarity with commercial British standards The Site Specialist Engineering (SSE) team The Site Specialist Engineering Electrical team provide specialist support to the business with respect to setting electrical standards and requirements for equipment/systems/facilities in accordance with legislation/processes. The team support a wide range of electrical disciplines and there are opportunities to learn and develop in LV, HV, C&I and Communications, each day varies with the chance to problem solve and drive innovative solutions from your experiences. As the Barrow site infrastructure grows you can play a part in the development of new facilities and help drive improvements in aging and existing systems, structures and components. We offer relocation support packages across all Submarines roles, subject to meeting eligibility criteria. Why BAE Systems? Here you'll build a career with purpose and limitless possibilities. With lifelong learning and meaningful work, this is a place where you can grow your career with confidence and be empowered to be your best. You'll be recognised for your contribution and enjoy rewards tailored to what's most important to you and your family, support for your financial and personal wellbeing, as well as a balanced lifestyle. In an environment embracing sustainable ways of working and with a strong sense of shared purpose, our supportive culture is a place you can feel you belong and proud of the difference you make. A place where everyone can thrive: We're committed to building an inclusive workplace where everyone feels valued and supported. We know that a diversity of backgrounds, perspectives and experiences strengthens our teams and is vital to the work we do. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date: 24th May 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible.
May 02, 2026
Full time
Job Title: Principal Engineer - Electrical Engineering (HV) Location: Barrow - Hybrid - 3 days per week on site (Dependent on business needs) We offer a range of hybrid and flexible working arrangements - please speak to your recruiter about the options for this particular role Salary: £45,628 - £61,500 (Commensurate with skills and experience) Who we are: Join BAE Systems and you'll be part of something bigger. As a valued member of our global colleague network, you'll bring your unique skills and perspectives to help pioneer progress and protect what matters most. You'll be trusted to play your part in delivering the advanced, technology-led defence, aerospace and security solutions of tomorrow, shaping a safer future, for all of us. From the depths of the ocean, to the far reaches of space, there's no limit to where a career at BAE Systems could take you. Job Description: As a Principal Engineer -Electrical Engineering (HV) you will be part of the Site Specialist Engineering Electrical team providing specialist support to the business with respect to setting electrical standards and requirements for equipment/systems/facilities in accordance with legislation/processes. You will be Point of contact for High Voltage issues regarding standards for site electrical systems and support a wide range of electrical disciplines, with opportunities to learn and develop in LV, HV, C&I and Communications, each day varies with the chance to problem solve and drive innovative solutions from your experiences. Core duties: You'll define site standards, processes and technical requirements in terms of electrical engineering for equipment, systems and facilities You'll conduct reviews and assessments of design proposals to ensure that the equipment/facilities are designed, constructed, commissioned, operated and maintained in accordance with the appropriate processes and standards You'll produce technical documentation and reports You'll have input into problem solving, engineering issues relating to the subject matter You'll be point of contact for High Voltage issues regarding standards for site electrical systems You will chair and lead improvements (policy, equipment, capabilities) with site risk cells set up to ensure compliance with relevant regulations Essential Skills: Electrical engineer with demonstratable High Voltage engineering experience of 11kV systems Demonstrable experience of working in an industrial engineering environment with familiarity of commercial standards Degree qualified in electrical engineering or equivalent (e.g. HND with relevant experience) Registered with an Engineering professional institute and have the ability to achieve chartered status Demonstrable experience of leadership within an engineering environment and familiarity with commercial British standards The Site Specialist Engineering (SSE) team The Site Specialist Engineering Electrical team provide specialist support to the business with respect to setting electrical standards and requirements for equipment/systems/facilities in accordance with legislation/processes. The team support a wide range of electrical disciplines and there are opportunities to learn and develop in LV, HV, C&I and Communications, each day varies with the chance to problem solve and drive innovative solutions from your experiences. As the Barrow site infrastructure grows you can play a part in the development of new facilities and help drive improvements in aging and existing systems, structures and components. We offer relocation support packages across all Submarines roles, subject to meeting eligibility criteria. Why BAE Systems? Here you'll build a career with purpose and limitless possibilities. With lifelong learning and meaningful work, this is a place where you can grow your career with confidence and be empowered to be your best. You'll be recognised for your contribution and enjoy rewards tailored to what's most important to you and your family, support for your financial and personal wellbeing, as well as a balanced lifestyle. In an environment embracing sustainable ways of working and with a strong sense of shared purpose, our supportive culture is a place you can feel you belong and proud of the difference you make. A place where everyone can thrive: We're committed to building an inclusive workplace where everyone feels valued and supported. We know that a diversity of backgrounds, perspectives and experiences strengthens our teams and is vital to the work we do. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date: 24th May 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible.
Dassault Trainer / Systems Trainer / TRM Trainer (Dassault) / 12 Month FTC - £60,000 / Hybrid / West Midlands We're supporting a leading engineering-focused organisation undergoing a major systems rollout and are looking for an experienced TRM Trainer to deliver high-impact training across the business. This role isn't just about system knowledge; we're looking for a well-rounded training professional who can design and deliver engaging learning across tools, processes, and user groups. The role Deliver instructor-led training (virtual and on-site) across TRM and associated platforms Facilitate engaging workshops for engineers, project teams, and business users Design and refine training materials aligned to real-world workflows Conduct training needs analysis and shape learning approaches Support user adoption and change initiatives Collaborate with stakeholders to align training with key programme milestones What we're looking for Proven experience delivering technical or systems training in complex environments (engineering, manufacturing, OEM or similar) Strong experience with Dassault TRM / 3DEXPERIENCE / Other PLM platforms A broad training background -a not limited to a single system Confident delivering both virtual and face-to-face training Strong communication skills with the ability to simplify complex concepts Experience creating high-quality training materials Nice to have Experience with ENOVIA, CATIA, SIMULIA Background in systems engineering, requirements management, or MBSE Exposure to change and adoption programmes Formal L&D or training qualification Package & working setup 12-month fixed-term contract £60,000 salary Hybrid working (mix of remote delivery and on-site workshops aligned to project milestones) Dassault Trainer / Systems Trainer / TRM Trainer (Dassault) / 12 Month FTC - £60,000 / Hybrid / West Midlands Dassault Trainer / Systems Trainer / TRM Trainer (Dassault) / 12 Month FTC - £60,000 / Hybrid / West Midlands
May 02, 2026
Full time
Dassault Trainer / Systems Trainer / TRM Trainer (Dassault) / 12 Month FTC - £60,000 / Hybrid / West Midlands We're supporting a leading engineering-focused organisation undergoing a major systems rollout and are looking for an experienced TRM Trainer to deliver high-impact training across the business. This role isn't just about system knowledge; we're looking for a well-rounded training professional who can design and deliver engaging learning across tools, processes, and user groups. The role Deliver instructor-led training (virtual and on-site) across TRM and associated platforms Facilitate engaging workshops for engineers, project teams, and business users Design and refine training materials aligned to real-world workflows Conduct training needs analysis and shape learning approaches Support user adoption and change initiatives Collaborate with stakeholders to align training with key programme milestones What we're looking for Proven experience delivering technical or systems training in complex environments (engineering, manufacturing, OEM or similar) Strong experience with Dassault TRM / 3DEXPERIENCE / Other PLM platforms A broad training background -a not limited to a single system Confident delivering both virtual and face-to-face training Strong communication skills with the ability to simplify complex concepts Experience creating high-quality training materials Nice to have Experience with ENOVIA, CATIA, SIMULIA Background in systems engineering, requirements management, or MBSE Exposure to change and adoption programmes Formal L&D or training qualification Package & working setup 12-month fixed-term contract £60,000 salary Hybrid working (mix of remote delivery and on-site workshops aligned to project milestones) Dassault Trainer / Systems Trainer / TRM Trainer (Dassault) / 12 Month FTC - £60,000 / Hybrid / West Midlands Dassault Trainer / Systems Trainer / TRM Trainer (Dassault) / 12 Month FTC - £60,000 / Hybrid / West Midlands
Agricultural Service Technician Salary: Up to £36,000 Base, 40K OTE Day Shifts Permanent / Company vehicle We are seeking a skilled Agricultural / plant engineer to join our growing engineering team, covering customer sites across the North Yorkshire Area click apply for full job details
May 02, 2026
Full time
Agricultural Service Technician Salary: Up to £36,000 Base, 40K OTE Day Shifts Permanent / Company vehicle We are seeking a skilled Agricultural / plant engineer to join our growing engineering team, covering customer sites across the North Yorkshire Area click apply for full job details
Role Title: EOL Network Engineer Duration: contract to run until 28/01/2027 Location: London, Hybrid 3 days per week onsite (weekend work may be required) Rate: up to 303.60 p/d Umbrella inside IR35 Role purpose / summary Provide a network engineer to complete the replacement of 50 end of life network switches in Client EMEA colo sites. Candidate should be located in the so they are in close proximity to stakeholders whose applications run on these EOL switches along with the Specialised Infra EMEA Lead Preconfigure devices in the lab Work with remote hands to rack devices Raise changes to communicate with stakeholders and obtain approval for the migration in an agreed window Migrate connections from old to new devices on agreed weekend with remote hands. Perform necessary checks and be ready for start of week checks on Sunday should any issues arise. Coordinate to decom, un-rack, and dispose of old kit Keep track of progress in our centralized tracking sheet. Candidate will possess a good attitude, work well with others, and an energetic approach to drive the project to completion, overcoming any obstacles in the way. Strong communication is important. Essential Skills Possess professional-level working knowledge of networks (TCP/IP, BGP routing, PIM routing, STP, route maps, access lists). Must have practical hands-on experience working with network routers and switches. Have experience working with Arista and Cisco switches. Possess strong analytical and project management skills to be able to manage the end of life project and communicate effectively with stakeholders Desirable Skills Experience in the financial sector a plus. Experience managing such a project end-to-end a plus Ideally have working-level knowledge of Ansible and other tooling to achieve objectives in an efficient manner. All profiles will be reviewed against the required skills and experience. Due to the high number of applications we will only be able to respond to successful applicants in the first instance. We thank you for your interest and the time taken to apply!
May 02, 2026
Contractor
Role Title: EOL Network Engineer Duration: contract to run until 28/01/2027 Location: London, Hybrid 3 days per week onsite (weekend work may be required) Rate: up to 303.60 p/d Umbrella inside IR35 Role purpose / summary Provide a network engineer to complete the replacement of 50 end of life network switches in Client EMEA colo sites. Candidate should be located in the so they are in close proximity to stakeholders whose applications run on these EOL switches along with the Specialised Infra EMEA Lead Preconfigure devices in the lab Work with remote hands to rack devices Raise changes to communicate with stakeholders and obtain approval for the migration in an agreed window Migrate connections from old to new devices on agreed weekend with remote hands. Perform necessary checks and be ready for start of week checks on Sunday should any issues arise. Coordinate to decom, un-rack, and dispose of old kit Keep track of progress in our centralized tracking sheet. Candidate will possess a good attitude, work well with others, and an energetic approach to drive the project to completion, overcoming any obstacles in the way. Strong communication is important. Essential Skills Possess professional-level working knowledge of networks (TCP/IP, BGP routing, PIM routing, STP, route maps, access lists). Must have practical hands-on experience working with network routers and switches. Have experience working with Arista and Cisco switches. Possess strong analytical and project management skills to be able to manage the end of life project and communicate effectively with stakeholders Desirable Skills Experience in the financial sector a plus. Experience managing such a project end-to-end a plus Ideally have working-level knowledge of Ansible and other tooling to achieve objectives in an efficient manner. All profiles will be reviewed against the required skills and experience. Due to the high number of applications we will only be able to respond to successful applicants in the first instance. We thank you for your interest and the time taken to apply!
Job Title: Fabricator - Plater Location: Glasgow, Govan and Scotstoun, Onsite - Must be able to attend a recruitment day in Glasgow Salary: £38,662 - plus 33% shift allowance where applicable Shift Pattern: Days - Mon-Thurs, 07:00-16:30, Nights - Mon-Thurs 20:30-06:00, Weekends - Fri-Sun, 07:00-19:30 Requirements: Modern Apprenticeship / Trade Papers must be provided when submitting your application Who we are: Join BAE Systems and you'll be part of something bigger. As a valued member of our global colleague network, you'll bring your unique skills and perspectives to help pioneer progress and protect what matters most. You'll be trusted to play your part in delivering the advanced, technology-led defence, aerospace and security solutions of tomorrow, shaping a safer future, for all of us. From the depths of the ocean, to the far reaches of space, there's no limit to where a career at BAE Systems could take you. What you'll be doing: Interpret engineering drawings, mark off materials and prepare plate using methods such as oxy fuel cutting and hand grinding Assemble ship structures - including shell, decks, bulkheads, frames and longitudinals - ensuring all components are accurately fitted, faired and tack welded Fabricate ship items such as seats, ladders, false flooring, panels, hatches, watertight doors, equipment seats and flooring systems Form materials using machine tools, including rolling, flanging and cutting equipment such as guillotines, croppers and mechanical saws Essential skills: You are required to hold a Modern Apprenticeship certificate also known as Trade Papers (you will be required to provide these papers on application and in person) and relevant mechanical qualifications (e.g., SVQ3, City & Guilds, or equivalent) Demonstrating up to date fabrication knowledge and hands on experience in construction or manufacturing environments Understanding and applying core manufacturing processes and completing tack welding to required safety and quality standards Demonstrate you are able to operate oxy fuel and/or plasma cutting equipment confidently and responsibly You will follow SHE principles and risk assessment requirements in all working conditions You'll have experience of working safely in confined spaces or at height, supported by relevant safety certifications The Fabricator Team: BAE Systems designs and builds world class naval ships and our Fabricator Platers play a vital role in delivering the Type 26 frigates. Working in teams of 6-12, you'll apply SVQ3 level training and marine fabrication experience to produce high quality steelwork that supports essential defence projects. Why BAE Systems? Here you'll build a career with purpose and limitless possibilities. With lifelong learning and meaningful work, this is a place where you can grow your career with confidence and be empowered to be your best. You'll be recognised for your contribution and enjoy rewards tailored to what's most important to you and your family, support for your financial and personal wellbeing, as well as a balanced lifestyle. In an environment embracing sustainable ways of working and with a strong sense of shared purpose, our supportive culture is a place you can feel you belong and proud of the difference you make. A place where everyone can thrive: We're committed to building an inclusive workplace where everyone feels valued and supported. We know that a diversity of backgrounds, perspectives and experiences strengthens our teams and is vital to the work we do. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date: 15th May 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible.
May 02, 2026
Full time
Job Title: Fabricator - Plater Location: Glasgow, Govan and Scotstoun, Onsite - Must be able to attend a recruitment day in Glasgow Salary: £38,662 - plus 33% shift allowance where applicable Shift Pattern: Days - Mon-Thurs, 07:00-16:30, Nights - Mon-Thurs 20:30-06:00, Weekends - Fri-Sun, 07:00-19:30 Requirements: Modern Apprenticeship / Trade Papers must be provided when submitting your application Who we are: Join BAE Systems and you'll be part of something bigger. As a valued member of our global colleague network, you'll bring your unique skills and perspectives to help pioneer progress and protect what matters most. You'll be trusted to play your part in delivering the advanced, technology-led defence, aerospace and security solutions of tomorrow, shaping a safer future, for all of us. From the depths of the ocean, to the far reaches of space, there's no limit to where a career at BAE Systems could take you. What you'll be doing: Interpret engineering drawings, mark off materials and prepare plate using methods such as oxy fuel cutting and hand grinding Assemble ship structures - including shell, decks, bulkheads, frames and longitudinals - ensuring all components are accurately fitted, faired and tack welded Fabricate ship items such as seats, ladders, false flooring, panels, hatches, watertight doors, equipment seats and flooring systems Form materials using machine tools, including rolling, flanging and cutting equipment such as guillotines, croppers and mechanical saws Essential skills: You are required to hold a Modern Apprenticeship certificate also known as Trade Papers (you will be required to provide these papers on application and in person) and relevant mechanical qualifications (e.g., SVQ3, City & Guilds, or equivalent) Demonstrating up to date fabrication knowledge and hands on experience in construction or manufacturing environments Understanding and applying core manufacturing processes and completing tack welding to required safety and quality standards Demonstrate you are able to operate oxy fuel and/or plasma cutting equipment confidently and responsibly You will follow SHE principles and risk assessment requirements in all working conditions You'll have experience of working safely in confined spaces or at height, supported by relevant safety certifications The Fabricator Team: BAE Systems designs and builds world class naval ships and our Fabricator Platers play a vital role in delivering the Type 26 frigates. Working in teams of 6-12, you'll apply SVQ3 level training and marine fabrication experience to produce high quality steelwork that supports essential defence projects. Why BAE Systems? Here you'll build a career with purpose and limitless possibilities. With lifelong learning and meaningful work, this is a place where you can grow your career with confidence and be empowered to be your best. You'll be recognised for your contribution and enjoy rewards tailored to what's most important to you and your family, support for your financial and personal wellbeing, as well as a balanced lifestyle. In an environment embracing sustainable ways of working and with a strong sense of shared purpose, our supportive culture is a place you can feel you belong and proud of the difference you make. A place where everyone can thrive: We're committed to building an inclusive workplace where everyone feels valued and supported. We know that a diversity of backgrounds, perspectives and experiences strengthens our teams and is vital to the work we do. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date: 15th May 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible.
Job title: Machine Operative Location: Bradford (BD4) Pay: 16.27 - 17.34 per hour We are currently recruiting Machine Operatives to join our manufacturing team in Bradford. This is a fantastic opportunity to work in a high-spec facility with excellent onsite perks. The Pay Rates Starting Rate: 16.27 ph After 12 Weeks: 16.80 ph (subject to review) After 26 Weeks: 17.34 ph (subject to review) Overtime: Available and paid at a higher rate. The Shift Pattern (Weekly Rotation) Days: Mon - Fri (06:00 - 14:00) Mids: Mon - Fri (14:00 - 22:00) Nights: Mon - Thu (22:00 - 06:00) You will be responsible for the smooth operation of production machinery. While all training is provided, we are specifically looking for individuals who can read engineering drawings and have an eye for detail. Loading and unloading materials and finished products. Setting up tooling and work-holding devices. Basic machine setting and machine minding. Conducting quality checks to ensure products meet standards. Manual handling of components. What We're Looking For Experience: CNC experience is highly preferable but not essential. Skills: Ability to read engineering drawings and schematics is a must. Attitude: Reliable, keen to learn, and comfortable with a rotating shift pattern. What's in it for you? Ongoing work with a stable, established company. Onsite Gym for your health and wellbeing. Subsidised Canteen and breakout areas. Facilities: Personal lockers, onsite parking, and large fridges for your lunch. How to Apply If you are ready to start a new career, apply today with your updated CV! Should you require any support or assistance, please contact your local Gi Group office. Gi Group Holdings Recruitment Limited are proud founding members of Menopause in business, corperate members for Neurodiversity in business, Disability Confident committed members, Gold status for the Armed Forces Covenant, Bronze trail blazers for Racial Equality matters and Age Freindly Employer pledge members. Gi Group Holdings Recruitment Limited group of companies includes Gi Recruitment Limited, Draefern Limited, Gi Group Recruitment Ltd, INTOO (UK) Limited, Marks Sattin (UK) Limited, TACK TMI UK Limited, Grafton Professional Staffing Limited, Encore Personnel Services, Gi Group Ireland Limited and Kelly Services (UK) Ltd. Gi Group Ireland Limited are acting as an Employment Agency in relation to this role. We are committed to protecting the privacy of all our candidates and clients. If you choose to apply, your information will be processed in accordance with the Gi Group Privacy Statement. To view a copy and to help you understand how we collect, use and process your personal data please visit the Privacy page on our Gi Group website.
May 02, 2026
Seasonal
Job title: Machine Operative Location: Bradford (BD4) Pay: 16.27 - 17.34 per hour We are currently recruiting Machine Operatives to join our manufacturing team in Bradford. This is a fantastic opportunity to work in a high-spec facility with excellent onsite perks. The Pay Rates Starting Rate: 16.27 ph After 12 Weeks: 16.80 ph (subject to review) After 26 Weeks: 17.34 ph (subject to review) Overtime: Available and paid at a higher rate. The Shift Pattern (Weekly Rotation) Days: Mon - Fri (06:00 - 14:00) Mids: Mon - Fri (14:00 - 22:00) Nights: Mon - Thu (22:00 - 06:00) You will be responsible for the smooth operation of production machinery. While all training is provided, we are specifically looking for individuals who can read engineering drawings and have an eye for detail. Loading and unloading materials and finished products. Setting up tooling and work-holding devices. Basic machine setting and machine minding. Conducting quality checks to ensure products meet standards. Manual handling of components. What We're Looking For Experience: CNC experience is highly preferable but not essential. Skills: Ability to read engineering drawings and schematics is a must. Attitude: Reliable, keen to learn, and comfortable with a rotating shift pattern. What's in it for you? Ongoing work with a stable, established company. Onsite Gym for your health and wellbeing. Subsidised Canteen and breakout areas. Facilities: Personal lockers, onsite parking, and large fridges for your lunch. How to Apply If you are ready to start a new career, apply today with your updated CV! Should you require any support or assistance, please contact your local Gi Group office. Gi Group Holdings Recruitment Limited are proud founding members of Menopause in business, corperate members for Neurodiversity in business, Disability Confident committed members, Gold status for the Armed Forces Covenant, Bronze trail blazers for Racial Equality matters and Age Freindly Employer pledge members. Gi Group Holdings Recruitment Limited group of companies includes Gi Recruitment Limited, Draefern Limited, Gi Group Recruitment Ltd, INTOO (UK) Limited, Marks Sattin (UK) Limited, TACK TMI UK Limited, Grafton Professional Staffing Limited, Encore Personnel Services, Gi Group Ireland Limited and Kelly Services (UK) Ltd. Gi Group Ireland Limited are acting as an Employment Agency in relation to this role. We are committed to protecting the privacy of all our candidates and clients. If you choose to apply, your information will be processed in accordance with the Gi Group Privacy Statement. To view a copy and to help you understand how we collect, use and process your personal data please visit the Privacy page on our Gi Group website.
Data Analyst Permanent 60,000 Hybrid working (3 days in office, 2 days remote) Wigan Sellick Partnership are supporting our industry leading client with the recruitment on a Data Analyst on a permanent basis as it looks to invest and transform the way it uses it's data. You'll work on top of the data platform being built, focusing on reporting, analysis, and decision support for senior stakeholders. The technology stack is Microsoft-led, with an Azure environment, Azure Data Lake, Power BI, and Power Apps, alongside a bespoke operational system and an ERP that need to be integrated. The business is experiencing a real time of growth and success both organically and through acquisition, with this newly created role designed to turn data into clear, actionable insight for the business. Key Responsibilities Build and maintain Power BI dashboards and reports for Board and PE stakeholders, Finance and operations teams. Analyse large volumes of transactional data to identify trends, risks, and opportunities for efficiency. Work with the Data Engineer to define data models, reporting requirements, business definitions, and metrics. Support the development of self-service reporting. Use Power Apps where appropriate to support data capture or operational workflows. Help the business understand and trust its data through clear storytelling and insight. Respond to ad-hoc analysis requests from senior stakeholders. Skills & Experience Strong experience as a Data Analyst in a commercial environment. Power BI development of Dashboards from a cloud-based data warehouse Solid SQL and data interrogation skills. Experience with Microsoft Fabric Experience working with large, high-volume datasets. Excellent communication skills and comfortable engaging with senior stakeholders. Please apply ASAP to be considered for the opportunity as CV's are being reviewed regularly. Sellick Partnership is proud to be an inclusive and accessible recruitment business and we support applications from candidates of all backgrounds and circumstances. Please note, our advertisements use years' experience, hourly rates, and salary levels purely as a guide and we assess applications based on the experience and skills evidenced on the CV. For information on how your personal details may be used by Sellick Partnership, please review our data processing notice on our website.
May 02, 2026
Full time
Data Analyst Permanent 60,000 Hybrid working (3 days in office, 2 days remote) Wigan Sellick Partnership are supporting our industry leading client with the recruitment on a Data Analyst on a permanent basis as it looks to invest and transform the way it uses it's data. You'll work on top of the data platform being built, focusing on reporting, analysis, and decision support for senior stakeholders. The technology stack is Microsoft-led, with an Azure environment, Azure Data Lake, Power BI, and Power Apps, alongside a bespoke operational system and an ERP that need to be integrated. The business is experiencing a real time of growth and success both organically and through acquisition, with this newly created role designed to turn data into clear, actionable insight for the business. Key Responsibilities Build and maintain Power BI dashboards and reports for Board and PE stakeholders, Finance and operations teams. Analyse large volumes of transactional data to identify trends, risks, and opportunities for efficiency. Work with the Data Engineer to define data models, reporting requirements, business definitions, and metrics. Support the development of self-service reporting. Use Power Apps where appropriate to support data capture or operational workflows. Help the business understand and trust its data through clear storytelling and insight. Respond to ad-hoc analysis requests from senior stakeholders. Skills & Experience Strong experience as a Data Analyst in a commercial environment. Power BI development of Dashboards from a cloud-based data warehouse Solid SQL and data interrogation skills. Experience with Microsoft Fabric Experience working with large, high-volume datasets. Excellent communication skills and comfortable engaging with senior stakeholders. Please apply ASAP to be considered for the opportunity as CV's are being reviewed regularly. Sellick Partnership is proud to be an inclusive and accessible recruitment business and we support applications from candidates of all backgrounds and circumstances. Please note, our advertisements use years' experience, hourly rates, and salary levels purely as a guide and we assess applications based on the experience and skills evidenced on the CV. For information on how your personal details may be used by Sellick Partnership, please review our data processing notice on our website.
Kinetic are assisting a global company with their recruitment of experienced Assembly Operatives. With over 70 years behind them, they are a world leader in engine boosting turbo systems and due to continued growth are looking to add to the team. This is an on-going, temporary position based in Handforth. You will be working Monday to Thursday 8am to 4:30pm, and Friday 8am to 1pm. YOU WILL BE DRUG AND ALCOHOL TESTED PRIOR TO STARTING THIS POSITION Role: Rotating between manufacturing & re-manufacturing of the turbo charges Assembly of different sized turbo chargers, performing quality checks to ensure the turbo charger meets the job specification. Dis assembly of turbos for re manufacturing, stripping and tear down, with accurate recording of data working and accurate scrap rates, failure and outputs Working to high specifications and targets. Flexible to work within all areas and have a good understanding of the different processes Using different hand tools and able to interpret diagrams Meeting targets and working within different teams Quality checking all processes of assembly Requirements: Previous assembly experience Experience using a variety of different hand tools Able to carry out heavy manual duties Health & safety conscious Excellent communication skills both written and verbal Details: Monday to Thursday: 8am to 4:30pm / Friday 8am to 1pm Early finish on a Friday Free on-site parking Uniform provided On-going work If you have the relevant experience and are looking for a new opportunity, please apply below with an up-to-date CV. Kinetic plc is a Recruitment Consultancy with over 40 years of experience of delivering staffing solutions to the engineering, manufacturing and technical industries. Kinetic plc treats all applications with a high degree of care, we review all submissions and will attempt to contact applicants who match the job profile. Those that do not meet the specification may not be contacted but their CV retained to be considered against future opportunities.
May 02, 2026
Seasonal
Kinetic are assisting a global company with their recruitment of experienced Assembly Operatives. With over 70 years behind them, they are a world leader in engine boosting turbo systems and due to continued growth are looking to add to the team. This is an on-going, temporary position based in Handforth. You will be working Monday to Thursday 8am to 4:30pm, and Friday 8am to 1pm. YOU WILL BE DRUG AND ALCOHOL TESTED PRIOR TO STARTING THIS POSITION Role: Rotating between manufacturing & re-manufacturing of the turbo charges Assembly of different sized turbo chargers, performing quality checks to ensure the turbo charger meets the job specification. Dis assembly of turbos for re manufacturing, stripping and tear down, with accurate recording of data working and accurate scrap rates, failure and outputs Working to high specifications and targets. Flexible to work within all areas and have a good understanding of the different processes Using different hand tools and able to interpret diagrams Meeting targets and working within different teams Quality checking all processes of assembly Requirements: Previous assembly experience Experience using a variety of different hand tools Able to carry out heavy manual duties Health & safety conscious Excellent communication skills both written and verbal Details: Monday to Thursday: 8am to 4:30pm / Friday 8am to 1pm Early finish on a Friday Free on-site parking Uniform provided On-going work If you have the relevant experience and are looking for a new opportunity, please apply below with an up-to-date CV. Kinetic plc is a Recruitment Consultancy with over 40 years of experience of delivering staffing solutions to the engineering, manufacturing and technical industries. Kinetic plc treats all applications with a high degree of care, we review all submissions and will attempt to contact applicants who match the job profile. Those that do not meet the specification may not be contacted but their CV retained to be considered against future opportunities.
Job Title: Nuclear Commissioning Project Leader - Electrical (Reactor) Location: Barrow-In-Furness, onsite Salary: Negotiable depending on experience You're expected to have completed 12 months in role prior to applying for an advertised vacancy and you should also discuss the internal opportunity with your line manager to ensure sustained business continuity and to further support your career development. We know there may be exceptional individual circumstances that impact this, in the first instance please discuss this with your line manager . If you don't feel you can talk to your line manager , you can contact your HRBP. PLEASE NOTE: Should you be invited for interview; you acknowledge that the Recruitment team will contact you and your line manager regarding your application for this opportunity. Who we are: Join BAE Systems and you'll be part of something bigger. As a valued member of our global colleague network, you'll bring your unique skills and perspectives to help pioneer progress and protect what matters most. You'll be trusted to play your part in delivering advanced, technology-led defence, aerospace and security solutions, shaping a safer future for all of us. From the depths of the ocean to the far reaches of space, there's no limit to where a career at BAE Systems could take you. What you will be doing: In this role, you will lead the planning and delivery of electrical commissioning activities across a defined test section, ensuring alignment with wider Test & Commissioning (T&C) programme objectives . You will take ownership of commissioning strategy execution, driving performance against time, cost, and quality targets. You will support and lead a team of commissioning engineers, providing technical direction, oversight, and coaching within a complex nuclear environment. Working closely with the Reactor Test Group (RTG), you will authorise test documentation and ensure all commissioning activities are conducted safely and in compliance with regulatory and company standards. Core duties: Drive the delivery of test and commissioning plans in line with programme milestones Lead and support a team of nuclear electrical commissioning engineers Support the Reactor Test Group (RTG), including authorisation of test documentation Act as Authorised Person within the Permit to Work system Review and approve engineering outputs and technical documentation Plan and manage commissioning programmes across complex systems Embed Learning from Experience (LFE) to improve safety, quality, and delivery Coordinate with stakeholders to ensure safe and compliant execution of commissioning activities Essential Skills: Degree, HNC/HND in an engineering discipline or equivalent experience Strong understanding of nuclear systems and associated testing and commissioning activities Knowledge of submarine systems and their operation Experience working within nuclear, COMAH, or similarly highly regulated environments Proven ability to plan and deliver test and commissioning programmes Experience leading , mentoring, and developing teams in complex engineering environments Familiarity with Learning from Experience (LFE) principles and continuous improvement practices The RTS Commissioning Team: Working within the Reactor Test Section (RTS) Commissioning Team, you will lead the planning and delivery of commissioning activities across major engineering systems and platform assemblies. You will manage a large and diverse team of commissioning engineers, bringing together a wide range of technical skills to deliver a complex and unique project of national importance. This role provides the opportunity to influence commissioning strategy, drive continuous improvement, and contribute to the successful delivery of critical submarine systems. Relocation support packages are available across all Submarines roles, subject to eligibility criteria. A place where everyone can thrive: We're committed to building an inclusive workplace where everyone feels valued and supported. We welcome applications from all suitably qualified people and encourage discussion of reasonable adjustments where needed. Please be aware that many roles at BAE Systems are subject to security and export control restrictions. Applicants must meet Baseline Personnel Security Standard, and many roles require higher levels of National Security Vetting, including 5-10 years continuous UK residency depending on the role . Why BAE Systems? Here you'll build a career with purpose and limitless possibilities. Lifelong learning, meaningful work, and a supportive culture enable you to grow with confidence . You'll be recognised for your contribution and supported with rewards that matter most to you. Closing Date: 7th May 2026 We reserve the right to close this vacancy early if we receive sufficient applications. If you are interested, please apply as early as possible.
May 02, 2026
Full time
Job Title: Nuclear Commissioning Project Leader - Electrical (Reactor) Location: Barrow-In-Furness, onsite Salary: Negotiable depending on experience You're expected to have completed 12 months in role prior to applying for an advertised vacancy and you should also discuss the internal opportunity with your line manager to ensure sustained business continuity and to further support your career development. We know there may be exceptional individual circumstances that impact this, in the first instance please discuss this with your line manager . If you don't feel you can talk to your line manager , you can contact your HRBP. PLEASE NOTE: Should you be invited for interview; you acknowledge that the Recruitment team will contact you and your line manager regarding your application for this opportunity. Who we are: Join BAE Systems and you'll be part of something bigger. As a valued member of our global colleague network, you'll bring your unique skills and perspectives to help pioneer progress and protect what matters most. You'll be trusted to play your part in delivering advanced, technology-led defence, aerospace and security solutions, shaping a safer future for all of us. From the depths of the ocean to the far reaches of space, there's no limit to where a career at BAE Systems could take you. What you will be doing: In this role, you will lead the planning and delivery of electrical commissioning activities across a defined test section, ensuring alignment with wider Test & Commissioning (T&C) programme objectives . You will take ownership of commissioning strategy execution, driving performance against time, cost, and quality targets. You will support and lead a team of commissioning engineers, providing technical direction, oversight, and coaching within a complex nuclear environment. Working closely with the Reactor Test Group (RTG), you will authorise test documentation and ensure all commissioning activities are conducted safely and in compliance with regulatory and company standards. Core duties: Drive the delivery of test and commissioning plans in line with programme milestones Lead and support a team of nuclear electrical commissioning engineers Support the Reactor Test Group (RTG), including authorisation of test documentation Act as Authorised Person within the Permit to Work system Review and approve engineering outputs and technical documentation Plan and manage commissioning programmes across complex systems Embed Learning from Experience (LFE) to improve safety, quality, and delivery Coordinate with stakeholders to ensure safe and compliant execution of commissioning activities Essential Skills: Degree, HNC/HND in an engineering discipline or equivalent experience Strong understanding of nuclear systems and associated testing and commissioning activities Knowledge of submarine systems and their operation Experience working within nuclear, COMAH, or similarly highly regulated environments Proven ability to plan and deliver test and commissioning programmes Experience leading , mentoring, and developing teams in complex engineering environments Familiarity with Learning from Experience (LFE) principles and continuous improvement practices The RTS Commissioning Team: Working within the Reactor Test Section (RTS) Commissioning Team, you will lead the planning and delivery of commissioning activities across major engineering systems and platform assemblies. You will manage a large and diverse team of commissioning engineers, bringing together a wide range of technical skills to deliver a complex and unique project of national importance. This role provides the opportunity to influence commissioning strategy, drive continuous improvement, and contribute to the successful delivery of critical submarine systems. Relocation support packages are available across all Submarines roles, subject to eligibility criteria. A place where everyone can thrive: We're committed to building an inclusive workplace where everyone feels valued and supported. We welcome applications from all suitably qualified people and encourage discussion of reasonable adjustments where needed. Please be aware that many roles at BAE Systems are subject to security and export control restrictions. Applicants must meet Baseline Personnel Security Standard, and many roles require higher levels of National Security Vetting, including 5-10 years continuous UK residency depending on the role . Why BAE Systems? Here you'll build a career with purpose and limitless possibilities. Lifelong learning, meaningful work, and a supportive culture enable you to grow with confidence . You'll be recognised for your contribution and supported with rewards that matter most to you. Closing Date: 7th May 2026 We reserve the right to close this vacancy early if we receive sufficient applications. If you are interested, please apply as early as possible.
Job Title: Senior Radiation Physicist Location: Barrow-in-Furness - Hybrid 3 days minimum onsite. We offer a range of hybrid and flexible working arrangements - please speak to your recruiter about the options for this particular role Salary: Competitive Who we are: Join BAE Systems and you'll be part of something bigger. As a valued member of our global colleague network, you'll bring your unique skills and perspectives to help pioneer progress and protect what matters most. You'll be trusted to play your part in delivering the advanced, technology-led defence, aerospace and security solutions of tomorrow, shaping a safer future, for all of us. From the depths of the ocean, to the far reaches of space, there's no limit to where a career at BAE Systems could take you. What you'll be doing: You will conduct radiological safety assessments and evaluate radiation damage risks to onboard electronics. Your role involves developing radiation detection systems and managing the systems engineering design of secondary shielding. Utilising point kernel and Monte Carlo calculations, you will support radiation transport modelling and provide technical guidance on design changes or defects to maintain safety standards. Additionally, you will develop ALARP justifications to support engineering decisions , ensuring all radiological risks are minimised to compliant and acceptable levels. Core duties: You'll hold a degree in Mathematics, Physics, Chemistry, Engineering, Nuclear Science, or a related field You'll possess demonstrable knowledge/experience of radiation physics, nuclear engineering, nuclear safety or similar You'll have knowledge/experience of Radiological safety assessments, ALARP justifications or similar You'll utilise your knowledge/experience of radiation transport methods (ATTILLA/MCBEND/MCNP etc .) The Radiation Physics & Shielding team: Our team designs and validates radiation shielding for the UK's nuclear submarine fleet across three major programmes. We handle shield design, build assessments, metrology, and safety studies, while developing novel detectors and electronics capability. We offer relocation support packages across all Submarines roles, subject to meeting eligibility criteria. Why BAE Systems? Here you'll build a career with purpose and limitless possibilities. With lifelong learning and meaningful work, this is a place where you can grow your career with confidence and be empowered to be your best. You'll be recognised for your contribution and enjoy rewards tailored to what's most important to you and your family, support for your financial and personal wellbeing, as well as a balanced lifestyle. In an environment embracing sustainable ways of working and with a strong sense of shared purpose, our supportive culture is a place you can feel you belong and proud of the difference you make. A place where everyone can thrive: We're committed to building an inclusive workplace where everyone feels valued and supported. We know that a diversity of backgrounds, perspectives and experiences strengthens our teams and is vital to the work we do. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date: 13th May 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible.
May 02, 2026
Full time
Job Title: Senior Radiation Physicist Location: Barrow-in-Furness - Hybrid 3 days minimum onsite. We offer a range of hybrid and flexible working arrangements - please speak to your recruiter about the options for this particular role Salary: Competitive Who we are: Join BAE Systems and you'll be part of something bigger. As a valued member of our global colleague network, you'll bring your unique skills and perspectives to help pioneer progress and protect what matters most. You'll be trusted to play your part in delivering the advanced, technology-led defence, aerospace and security solutions of tomorrow, shaping a safer future, for all of us. From the depths of the ocean, to the far reaches of space, there's no limit to where a career at BAE Systems could take you. What you'll be doing: You will conduct radiological safety assessments and evaluate radiation damage risks to onboard electronics. Your role involves developing radiation detection systems and managing the systems engineering design of secondary shielding. Utilising point kernel and Monte Carlo calculations, you will support radiation transport modelling and provide technical guidance on design changes or defects to maintain safety standards. Additionally, you will develop ALARP justifications to support engineering decisions , ensuring all radiological risks are minimised to compliant and acceptable levels. Core duties: You'll hold a degree in Mathematics, Physics, Chemistry, Engineering, Nuclear Science, or a related field You'll possess demonstrable knowledge/experience of radiation physics, nuclear engineering, nuclear safety or similar You'll have knowledge/experience of Radiological safety assessments, ALARP justifications or similar You'll utilise your knowledge/experience of radiation transport methods (ATTILLA/MCBEND/MCNP etc .) The Radiation Physics & Shielding team: Our team designs and validates radiation shielding for the UK's nuclear submarine fleet across three major programmes. We handle shield design, build assessments, metrology, and safety studies, while developing novel detectors and electronics capability. We offer relocation support packages across all Submarines roles, subject to meeting eligibility criteria. Why BAE Systems? Here you'll build a career with purpose and limitless possibilities. With lifelong learning and meaningful work, this is a place where you can grow your career with confidence and be empowered to be your best. You'll be recognised for your contribution and enjoy rewards tailored to what's most important to you and your family, support for your financial and personal wellbeing, as well as a balanced lifestyle. In an environment embracing sustainable ways of working and with a strong sense of shared purpose, our supportive culture is a place you can feel you belong and proud of the difference you make. A place where everyone can thrive: We're committed to building an inclusive workplace where everyone feels valued and supported. We know that a diversity of backgrounds, perspectives and experiences strengthens our teams and is vital to the work we do. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date: 13th May 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible.
Job Title: Fabricator - Plater Location: Glasgow, Govan and Scotstoun, Onsite - Must be able to attend a recruitment day in Glasgow Salary: £38,662 - plus 33% shift allowance where applicable Shift Pattern: Days - Mon-Thurs, 07:00-16:30, Nights - Mon-Thurs 20:30-06:00, Weekends - Fri-Sun, 07:00-19:30 Requirements: Modern Apprenticeship / Trade Papers must be provided when submitting your application Who we are: Join BAE Systems and you'll be part of something bigger. As a valued member of our global colleague network, you'll bring your unique skills and perspectives to help pioneer progress and protect what matters most. You'll be trusted to play your part in delivering the advanced, technology-led defence, aerospace and security solutions of tomorrow, shaping a safer future, for all of us. From the depths of the ocean, to the far reaches of space, there's no limit to where a career at BAE Systems could take you. What you'll be doing: Interpret engineering drawings, mark off materials and prepare plate using methods such as oxy fuel cutting and hand grinding Assemble ship structures - including shell, decks, bulkheads, frames and longitudinals - ensuring all components are accurately fitted, faired and tack welded Fabricate ship items such as seats, ladders, false flooring, panels, hatches, watertight doors, equipment seats and flooring systems Form materials using machine tools, including rolling, flanging and cutting equipment such as guillotines, croppers and mechanical saws Essential skills: You are required to hold a Modern Apprenticeship certificate also known as Trade Papers (you will be required to provide these papers on application and in person) and relevant mechanical qualifications (e.g., SVQ3, City & Guilds, or equivalent) Demonstrating up to date fabrication knowledge and hands on experience in construction or manufacturing environments Understanding and applying core manufacturing processes and completing tack welding to required safety and quality standards Demonstrate you are able to operate oxy fuel and/or plasma cutting equipment confidently and responsibly You will follow SHE principles and risk assessment requirements in all working conditions You'll have experience of working safely in confined spaces or at height, supported by relevant safety certifications The Fabricator Team: BAE Systems designs and builds world class naval ships and our Fabricator Platers play a vital role in delivering the Type 26 frigates. Working in teams of 6-12, you'll apply SVQ3 level training and marine fabrication experience to produce high quality steelwork that supports essential defence projects. Why BAE Systems? Here you'll build a career with purpose and limitless possibilities. With lifelong learning and meaningful work, this is a place where you can grow your career with confidence and be empowered to be your best. You'll be recognised for your contribution and enjoy rewards tailored to what's most important to you and your family, support for your financial and personal wellbeing, as well as a balanced lifestyle. In an environment embracing sustainable ways of working and with a strong sense of shared purpose, our supportive culture is a place you can feel you belong and proud of the difference you make. A place where everyone can thrive: We're committed to building an inclusive workplace where everyone feels valued and supported. We know that a diversity of backgrounds, perspectives and experiences strengthens our teams and is vital to the work we do. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date: 15th May 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible.
May 02, 2026
Full time
Job Title: Fabricator - Plater Location: Glasgow, Govan and Scotstoun, Onsite - Must be able to attend a recruitment day in Glasgow Salary: £38,662 - plus 33% shift allowance where applicable Shift Pattern: Days - Mon-Thurs, 07:00-16:30, Nights - Mon-Thurs 20:30-06:00, Weekends - Fri-Sun, 07:00-19:30 Requirements: Modern Apprenticeship / Trade Papers must be provided when submitting your application Who we are: Join BAE Systems and you'll be part of something bigger. As a valued member of our global colleague network, you'll bring your unique skills and perspectives to help pioneer progress and protect what matters most. You'll be trusted to play your part in delivering the advanced, technology-led defence, aerospace and security solutions of tomorrow, shaping a safer future, for all of us. From the depths of the ocean, to the far reaches of space, there's no limit to where a career at BAE Systems could take you. What you'll be doing: Interpret engineering drawings, mark off materials and prepare plate using methods such as oxy fuel cutting and hand grinding Assemble ship structures - including shell, decks, bulkheads, frames and longitudinals - ensuring all components are accurately fitted, faired and tack welded Fabricate ship items such as seats, ladders, false flooring, panels, hatches, watertight doors, equipment seats and flooring systems Form materials using machine tools, including rolling, flanging and cutting equipment such as guillotines, croppers and mechanical saws Essential skills: You are required to hold a Modern Apprenticeship certificate also known as Trade Papers (you will be required to provide these papers on application and in person) and relevant mechanical qualifications (e.g., SVQ3, City & Guilds, or equivalent) Demonstrating up to date fabrication knowledge and hands on experience in construction or manufacturing environments Understanding and applying core manufacturing processes and completing tack welding to required safety and quality standards Demonstrate you are able to operate oxy fuel and/or plasma cutting equipment confidently and responsibly You will follow SHE principles and risk assessment requirements in all working conditions You'll have experience of working safely in confined spaces or at height, supported by relevant safety certifications The Fabricator Team: BAE Systems designs and builds world class naval ships and our Fabricator Platers play a vital role in delivering the Type 26 frigates. Working in teams of 6-12, you'll apply SVQ3 level training and marine fabrication experience to produce high quality steelwork that supports essential defence projects. Why BAE Systems? Here you'll build a career with purpose and limitless possibilities. With lifelong learning and meaningful work, this is a place where you can grow your career with confidence and be empowered to be your best. You'll be recognised for your contribution and enjoy rewards tailored to what's most important to you and your family, support for your financial and personal wellbeing, as well as a balanced lifestyle. In an environment embracing sustainable ways of working and with a strong sense of shared purpose, our supportive culture is a place you can feel you belong and proud of the difference you make. A place where everyone can thrive: We're committed to building an inclusive workplace where everyone feels valued and supported. We know that a diversity of backgrounds, perspectives and experiences strengthens our teams and is vital to the work we do. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date: 15th May 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible.
