About the Role We are seeking a skilled Mechanical Maintenance Technician to support the inspection, servicing, overhaul, and repair of aircraft ground support equipment (GSE) and associated tooling. This role is split between our workshop facility and customer sites across the UK. You will carry out both planned preventative maintenance (PPM) and reactive repair activities, ensuring equipment remains safe, compliant, and operational within demanding aviation environments. While hydraulic knowledge is advantageous, this position is primarily mechanically focused, involving strip-downs, rebuilds, inspections, and general engineering maintenance. Key Responsibilities Carry out planned preventative maintenance (PPM) on aircraft ground support equipment and generic tooling. Conduct mechanical inspections, servicing, and overhaul activities Diagnose and repair mechanical faults on customer sites and within the workshop Strip, inspect, refurbish, and rebuild mechanical assemblies Working on items such as lifting equipment, jacks, tow-bars, and ground handling equipment etc Replace bearings, seals, bushes, mechanical linkages, and associated components Assist with hydraulic system maintenance where required Interpret engineering drawings and maintenance manuals Complete service reports and customer documentation accurately Ensure compliance with UK safety regulations and industry standards Maintain high housekeeping and workshop safety standards Essential Skills & Experience Strong background in mechanical maintenance and repair Experience carrying out planned preventative maintenance (PPM) Confident in mechanical fault finding and diagnostics Experience working on-site at customer premises Ability to read and interpret engineering drawings Good understanding of safe working practices Full manual UK driving licence (essential for site visits) Ability to use a tablet to complete maintenance report write ups Must be able to gain an airport pass - therefore clean personal record and ability to show previous work/educational history up to 5 years prior with references. Desirable Experience working with aircraft ground support equipment Hydraulic maintenance experience NVQ Level 3 (or equivalent) in Mechanical Engineering / Maintenance Experience with lifting equipment inspections (LOLER knowledge beneficial) Basic electrical fault-finding skills About You You will be: Mechanically minded and hands-on Customer-focused with good communication skills Organised and able to manage site-based responsibilities Safety-conscious with strong attention to detail Comfortable working independently and as part of a team What We Offer Competitive salary (dependent on experience) Overtime and site allowance opportunities Company vehicle (if applicable) Company pension scheme Ongoing technical training and development
May 03, 2026
Full time
About the Role We are seeking a skilled Mechanical Maintenance Technician to support the inspection, servicing, overhaul, and repair of aircraft ground support equipment (GSE) and associated tooling. This role is split between our workshop facility and customer sites across the UK. You will carry out both planned preventative maintenance (PPM) and reactive repair activities, ensuring equipment remains safe, compliant, and operational within demanding aviation environments. While hydraulic knowledge is advantageous, this position is primarily mechanically focused, involving strip-downs, rebuilds, inspections, and general engineering maintenance. Key Responsibilities Carry out planned preventative maintenance (PPM) on aircraft ground support equipment and generic tooling. Conduct mechanical inspections, servicing, and overhaul activities Diagnose and repair mechanical faults on customer sites and within the workshop Strip, inspect, refurbish, and rebuild mechanical assemblies Working on items such as lifting equipment, jacks, tow-bars, and ground handling equipment etc Replace bearings, seals, bushes, mechanical linkages, and associated components Assist with hydraulic system maintenance where required Interpret engineering drawings and maintenance manuals Complete service reports and customer documentation accurately Ensure compliance with UK safety regulations and industry standards Maintain high housekeeping and workshop safety standards Essential Skills & Experience Strong background in mechanical maintenance and repair Experience carrying out planned preventative maintenance (PPM) Confident in mechanical fault finding and diagnostics Experience working on-site at customer premises Ability to read and interpret engineering drawings Good understanding of safe working practices Full manual UK driving licence (essential for site visits) Ability to use a tablet to complete maintenance report write ups Must be able to gain an airport pass - therefore clean personal record and ability to show previous work/educational history up to 5 years prior with references. Desirable Experience working with aircraft ground support equipment Hydraulic maintenance experience NVQ Level 3 (or equivalent) in Mechanical Engineering / Maintenance Experience with lifting equipment inspections (LOLER knowledge beneficial) Basic electrical fault-finding skills About You You will be: Mechanically minded and hands-on Customer-focused with good communication skills Organised and able to manage site-based responsibilities Safety-conscious with strong attention to detail Comfortable working independently and as part of a team What We Offer Competitive salary (dependent on experience) Overtime and site allowance opportunities Company vehicle (if applicable) Company pension scheme Ongoing technical training and development
Commercial Mechanic Howard Civil Engineering is one of the North's leading civil engineering companies; a client focussed organisation who prides itself on building strong, trustworthy relationships that are made to last. We listen to our customers needs and endeavour to deliver a bespoke package to ensure outstanding results every time. Howard Plant Hire, a division of Howard Civil Engineering, are currently seeking experienced light commercial vehicle technician in response to an increased workload. The right candidate will be workshop based with some requirements for call outs as required. Role Overview: Perform routine maintenance tasks such as oil changes, filter replacements, and lubrication of components. Inspect and diagnose mechanical, electrical, and hydraulic systems for faults and failures. Conduct repairs on engines, transmissions, brakes, suspension systems, and other components. Ensure compliance with manufacturer specifications and maintenance schedules. Utilize diagnostic equipment and tools to identify issues with LCV s. Troubleshoot electrical systems, including wiring, lighting, and electronic controls. Interpret diagnostic codes and repair manuals to rectify problems efficiently. Repair or replace faulty parts, ensuring proper installation and functionality. Adhere to health and safety regulations, including the use of personal protective equipment (PPE) and safe working practices. Perform safety inspections and assessments on LCV to identify potential hazards or compliance issues. Maintain accurate records of maintenance and repair activities, including parts used and hours worked. Ensure compliance with legal requirements, including vehicle roadworthiness and emissions standards. Requirements: At least 5 years experience in a similar role Stay updated on industry developments, technological advancements, and regulatory changes related to LCV maintenance and repair. Competent with MOT s, repairs and maintenance of commercial vehicles. Experience with Citroen & Peugeot vehicles is beneficial. NVQ Level 3 in Light Vehicle Maintenance is preferred. Clean Driving License Organised and familiar with vehicle paperwork Safety conscious with awareness of hazards in the work place. Share expertise and best practices with team members to improve overall efficiency and service quality.
May 03, 2026
Full time
Commercial Mechanic Howard Civil Engineering is one of the North's leading civil engineering companies; a client focussed organisation who prides itself on building strong, trustworthy relationships that are made to last. We listen to our customers needs and endeavour to deliver a bespoke package to ensure outstanding results every time. Howard Plant Hire, a division of Howard Civil Engineering, are currently seeking experienced light commercial vehicle technician in response to an increased workload. The right candidate will be workshop based with some requirements for call outs as required. Role Overview: Perform routine maintenance tasks such as oil changes, filter replacements, and lubrication of components. Inspect and diagnose mechanical, electrical, and hydraulic systems for faults and failures. Conduct repairs on engines, transmissions, brakes, suspension systems, and other components. Ensure compliance with manufacturer specifications and maintenance schedules. Utilize diagnostic equipment and tools to identify issues with LCV s. Troubleshoot electrical systems, including wiring, lighting, and electronic controls. Interpret diagnostic codes and repair manuals to rectify problems efficiently. Repair or replace faulty parts, ensuring proper installation and functionality. Adhere to health and safety regulations, including the use of personal protective equipment (PPE) and safe working practices. Perform safety inspections and assessments on LCV to identify potential hazards or compliance issues. Maintain accurate records of maintenance and repair activities, including parts used and hours worked. Ensure compliance with legal requirements, including vehicle roadworthiness and emissions standards. Requirements: At least 5 years experience in a similar role Stay updated on industry developments, technological advancements, and regulatory changes related to LCV maintenance and repair. Competent with MOT s, repairs and maintenance of commercial vehicles. Experience with Citroen & Peugeot vehicles is beneficial. NVQ Level 3 in Light Vehicle Maintenance is preferred. Clean Driving License Organised and familiar with vehicle paperwork Safety conscious with awareness of hazards in the work place. Share expertise and best practices with team members to improve overall efficiency and service quality.
Line Up Aviation is a specialist aviation and aerospace recruitment company that has been operating worldwide for more than 35 years. We work with some of the industry's best-known companies who demand the highest standard of service. We are currently recruiting for the following position on behalf of our global aviation client, a leading aerospace tooling support company. Our client is a world-renowned specialist in the design, manufacturing, and servicing of aircraft tooling, engine tooling, engine stands, and aviation ground support equipment. If you are a dynamic, customer orientated Mechanical Engineer we would like to hear from you. Job Title: Mechanical Technician (Field Service Technician) Location: Colnbrook/Poyle Contract Type: Permanent, Fulltime. Package: Competitive Basic + Bens We are seeking skilled Mechanical Technicians to maintain, troubleshoot, and improve mechanical systems for airline tooling, including aircraft engine stands and ground support equipment. The role ensures the safe, efficient, and reliable operation of tooling critical to aircraft maintenance operations. This opportunity will be visiting customer sites in and around London Heathrow Airport. Key Duties: Perform inspections, diagnostics, repairs, modifications, and preventive maintenance mainly on mechanical and hydraulic aeronautical tooling (lifting equipment, support tools, measuring tools, GSE). Carry out technical expertise, functional tests, and load tests to validate the conformity of repaired equipment. Establish diagnostic methods and propose repair solutions when standard procedures are not sufficient. Dismantle, reassemble, adjust, and calibrate equipment, ensuring accuracy and compliance with technical standards. Conduct quality control checks before shipment and prepare equipment for delivery to customers. Perform on-site interventions at customer locations (airlines, MROs, OEMs). Ensure proper use of ERP and workshop documentation to track work progress and maintain records. Maintain workshop organization: cleanliness, tooling storage, stock management, and compliance with safety rules. Act as the main customer focal point for after-sales services, ensuring clear communication and trustful relationships. Principal skills and Qualifications Required Technical diploma or degree in mechanics (automotive, motorcycle, heavy vehicles, agricultural machinery, industrial mechanics, or equivalent). Proven experience in mechanical repair and maintenance (hydraulic, pneumatic, or mechanical systems). Strong ability to read and interpret technical drawings and documentation. Manual dexterity, precision, and a practical approach to problem-solving. Preferred: Experience in an airline, MRO (Maintenance, Repair, Overhaul), or aerospace environment. Knowledge of regulatory standards (e.g., EASA Part 145)
May 01, 2026
Full time
Line Up Aviation is a specialist aviation and aerospace recruitment company that has been operating worldwide for more than 35 years. We work with some of the industry's best-known companies who demand the highest standard of service. We are currently recruiting for the following position on behalf of our global aviation client, a leading aerospace tooling support company. Our client is a world-renowned specialist in the design, manufacturing, and servicing of aircraft tooling, engine tooling, engine stands, and aviation ground support equipment. If you are a dynamic, customer orientated Mechanical Engineer we would like to hear from you. Job Title: Mechanical Technician (Field Service Technician) Location: Colnbrook/Poyle Contract Type: Permanent, Fulltime. Package: Competitive Basic + Bens We are seeking skilled Mechanical Technicians to maintain, troubleshoot, and improve mechanical systems for airline tooling, including aircraft engine stands and ground support equipment. The role ensures the safe, efficient, and reliable operation of tooling critical to aircraft maintenance operations. This opportunity will be visiting customer sites in and around London Heathrow Airport. Key Duties: Perform inspections, diagnostics, repairs, modifications, and preventive maintenance mainly on mechanical and hydraulic aeronautical tooling (lifting equipment, support tools, measuring tools, GSE). Carry out technical expertise, functional tests, and load tests to validate the conformity of repaired equipment. Establish diagnostic methods and propose repair solutions when standard procedures are not sufficient. Dismantle, reassemble, adjust, and calibrate equipment, ensuring accuracy and compliance with technical standards. Conduct quality control checks before shipment and prepare equipment for delivery to customers. Perform on-site interventions at customer locations (airlines, MROs, OEMs). Ensure proper use of ERP and workshop documentation to track work progress and maintain records. Maintain workshop organization: cleanliness, tooling storage, stock management, and compliance with safety rules. Act as the main customer focal point for after-sales services, ensuring clear communication and trustful relationships. Principal skills and Qualifications Required Technical diploma or degree in mechanics (automotive, motorcycle, heavy vehicles, agricultural machinery, industrial mechanics, or equivalent). Proven experience in mechanical repair and maintenance (hydraulic, pneumatic, or mechanical systems). Strong ability to read and interpret technical drawings and documentation. Manual dexterity, precision, and a practical approach to problem-solving. Preferred: Experience in an airline, MRO (Maintenance, Repair, Overhaul), or aerospace environment. Knowledge of regulatory standards (e.g., EASA Part 145)
If you are an experienced Multi-Skilled Maintenance Technician with an accredited apprenticeship and both electrical and mechanical expertise, please apply with your updated CV. Our team will contact you to discuss the role in more detail. Job title : Maintenance Technician Job type: Temporary - Ongoing Location : Peterlee,SR8 2HX Pay Rates: Up to 46,514 Dependant on Experience (paid overtime available) Working Hours: 36.5 hours per week Shifts: 4 Crew, 3 Shifts per week (days/nights rotation, Mon - Sat) Key Tasks and Responsibilities may include, but are not limited to: Completing planned preventative maintenance and reactive breakdown maintenance on: Automated Metal Cutting Equipment including Laser and Plasma Automated Paint Plant Robotic Welding Systems Welding equipment Hydraulic and Pneumatic Systems Electronic Torque equipment Automated Moving Lines/AGVs Hydraulic Presses Overhead and Semi Goliath Cranes Completing Dynamic Risk Assessments along with adhering to the company's Health and Safety policy Utilising the Computerised Maintenance Management System (SAP PM, Agility etc) to review previous breakdown data and record actions taken on breakdown recoveries Diagnosing PLC concerns and implementing program changes Complete training and further learning as required Breakdown root cause identification and countermeasure implementation Requirements: Experience relevant to an industrial manufacturing environment Completed an accredited apprenticeship and be multi-skilled in electrical and mechanical functions (electrical preferred) Benefits: On-going assignment with the potential for permanent employment should the opportunity arise. 16 Rest Days during 4-week shift cycle (57%) 182.5 Annual holiday hours plus bank holidays (Pro-rata) Additional holiday hours awarded every 2-years (max x40 hours) Monthly bonus Free onsite parking Onsite Gym If you're passionate about working for a world-renowned manufacturing leader, then apply today! This is an ongoing, long term temporary contract role. Please be aware that PPE is mandatory on the factory floor. This will include ear defenders, overalls and safety boots and will be supplied to you. Previous applicants are welcome to reapply Due to the volume of applications we receive, if you haven't heard back from us within 2 weeks please assume you have been unsuccessful on this occasion. "We are an equal opportunities employer and welcome applications from all suitably qualified persons regardless of their race, sex, disability, religion/belief, sexual orientation or age".
May 01, 2026
Contractor
If you are an experienced Multi-Skilled Maintenance Technician with an accredited apprenticeship and both electrical and mechanical expertise, please apply with your updated CV. Our team will contact you to discuss the role in more detail. Job title : Maintenance Technician Job type: Temporary - Ongoing Location : Peterlee,SR8 2HX Pay Rates: Up to 46,514 Dependant on Experience (paid overtime available) Working Hours: 36.5 hours per week Shifts: 4 Crew, 3 Shifts per week (days/nights rotation, Mon - Sat) Key Tasks and Responsibilities may include, but are not limited to: Completing planned preventative maintenance and reactive breakdown maintenance on: Automated Metal Cutting Equipment including Laser and Plasma Automated Paint Plant Robotic Welding Systems Welding equipment Hydraulic and Pneumatic Systems Electronic Torque equipment Automated Moving Lines/AGVs Hydraulic Presses Overhead and Semi Goliath Cranes Completing Dynamic Risk Assessments along with adhering to the company's Health and Safety policy Utilising the Computerised Maintenance Management System (SAP PM, Agility etc) to review previous breakdown data and record actions taken on breakdown recoveries Diagnosing PLC concerns and implementing program changes Complete training and further learning as required Breakdown root cause identification and countermeasure implementation Requirements: Experience relevant to an industrial manufacturing environment Completed an accredited apprenticeship and be multi-skilled in electrical and mechanical functions (electrical preferred) Benefits: On-going assignment with the potential for permanent employment should the opportunity arise. 16 Rest Days during 4-week shift cycle (57%) 182.5 Annual holiday hours plus bank holidays (Pro-rata) Additional holiday hours awarded every 2-years (max x40 hours) Monthly bonus Free onsite parking Onsite Gym If you're passionate about working for a world-renowned manufacturing leader, then apply today! This is an ongoing, long term temporary contract role. Please be aware that PPE is mandatory on the factory floor. This will include ear defenders, overalls and safety boots and will be supplied to you. Previous applicants are welcome to reapply Due to the volume of applications we receive, if you haven't heard back from us within 2 weeks please assume you have been unsuccessful on this occasion. "We are an equal opportunities employer and welcome applications from all suitably qualified persons regardless of their race, sex, disability, religion/belief, sexual orientation or age".
Field Service Technician Kingswinford, West Midlands 32,000- 55,000 + Travel Pay + Benefits The Opportunity We're partnering with a globally established, privately owned engineering manufacturer recognised as a market leader in advanced technologies. Backed by almost a century of innovation and sustained global growth, this business supplies critical equipment into aerospace, automotive, defence, and energy markets worldwide. This is a key hire into a growing international service function, offering genuine exposure to complex machinery, global travel, and long term career development within a highly respected, people first engineering organisation. What You'll Do Reporting to the Director of Operations, you'll take ownership of field installation, commissioning, testing, and servicing of advanced automation systems. Day to day responsibilities will include: - Installing, commissioning, testing, and debugging bespoke machines at customer sites - Fault finding and repairing mechanical, electrical, hydraulic, and pneumatic systems - Programming, modifying, and supporting PLC controlled systems (Siemens S7 1200 / S7 1500 and Allen Bradley ControlLogix) - Diagnosing machine performance issues in collaboration with customer engineering teams - Delivering operator and maintenance training, ensuring safe and effective machine use You'll also play a key role in continuous improvement initiatives, supporting machine upgrades, safety enhancements, and global service best practice as the business continues to expand. What's On Offer - Salary: 32,000- 55,000 depending on experience - Additional travel compensation under a global travel policy - Extensive technical training and ongoing development - Pension scheme - Holiday entitlement plus bank holidays - Long term career progression within a stable, family owned global business - Day shift , full time position - Site base: Kingswinford, West Midlands (non remote) Travel will typically be 30-50% , with short periods of higher international travel. What We're Looking For You'll be an experienced hands on technician, comfortable working independently in customer environments and across international locations. Ideally, you'll bring: - Strong mechanical and electrical fault finding experience - Working knowledge of PLCs (Siemens preferred; Allen Bradley advantageous) - Experience with hydraulics, pneumatics, and automation systems - Ability to read and interpret electrical schematics and engineering drawings - A professional, customer focused approach and strong communication skills Experience with robotics, machine safety systems, and international field service is advantageous but not essential for the right technician with the right mindset. Call to Action If this sounds like the right next step in your engineering career, apply directly through this advert or contact me for a confidential conversation before applying. Please note: the client's full identity will be shared with shortlisted candidates at interview stage.
Apr 30, 2026
Full time
Field Service Technician Kingswinford, West Midlands 32,000- 55,000 + Travel Pay + Benefits The Opportunity We're partnering with a globally established, privately owned engineering manufacturer recognised as a market leader in advanced technologies. Backed by almost a century of innovation and sustained global growth, this business supplies critical equipment into aerospace, automotive, defence, and energy markets worldwide. This is a key hire into a growing international service function, offering genuine exposure to complex machinery, global travel, and long term career development within a highly respected, people first engineering organisation. What You'll Do Reporting to the Director of Operations, you'll take ownership of field installation, commissioning, testing, and servicing of advanced automation systems. Day to day responsibilities will include: - Installing, commissioning, testing, and debugging bespoke machines at customer sites - Fault finding and repairing mechanical, electrical, hydraulic, and pneumatic systems - Programming, modifying, and supporting PLC controlled systems (Siemens S7 1200 / S7 1500 and Allen Bradley ControlLogix) - Diagnosing machine performance issues in collaboration with customer engineering teams - Delivering operator and maintenance training, ensuring safe and effective machine use You'll also play a key role in continuous improvement initiatives, supporting machine upgrades, safety enhancements, and global service best practice as the business continues to expand. What's On Offer - Salary: 32,000- 55,000 depending on experience - Additional travel compensation under a global travel policy - Extensive technical training and ongoing development - Pension scheme - Holiday entitlement plus bank holidays - Long term career progression within a stable, family owned global business - Day shift , full time position - Site base: Kingswinford, West Midlands (non remote) Travel will typically be 30-50% , with short periods of higher international travel. What We're Looking For You'll be an experienced hands on technician, comfortable working independently in customer environments and across international locations. Ideally, you'll bring: - Strong mechanical and electrical fault finding experience - Working knowledge of PLCs (Siemens preferred; Allen Bradley advantageous) - Experience with hydraulics, pneumatics, and automation systems - Ability to read and interpret electrical schematics and engineering drawings - A professional, customer focused approach and strong communication skills Experience with robotics, machine safety systems, and international field service is advantageous but not essential for the right technician with the right mindset. Call to Action If this sounds like the right next step in your engineering career, apply directly through this advert or contact me for a confidential conversation before applying. Please note: the client's full identity will be shared with shortlisted candidates at interview stage.
An excellent opportunity for an experienced HGV Technician to join a well-established company. Job Type: Full-Time, Permanent. Salary: Up To £50,000 Per Annum, Depending on Experience. Location: Ashford TN23. About The Role: The company are currently looking to recruit a skilled and experienced HGV Technician to join their team. You will be responsible for maintaining and repairing heavy goods vehicles (HGVs) across a mixed fleet including Volvo, Scania, Mercedes, DAF and Renault vehicles. This is a full-time position offering a salary of up to £50,000 per year, no shift work and you will be required to work two Saturday mornings per month. Key Responsibilities: Carry out routine maintenance and inspections on HGVs and trailers, including annual MOT preparation Diagnose and troubleshoot mechanical, electrical, and hydraulic faults Repair or replace faulty components, parts, or systems Perform vehicle servicing, including oil changes, filter replacements, and fluid checks Use hand tools and specialist equipment to complete repairs and maintenance tasks Assemble and disassemble vehicle components as required Conduct diagnostic tests using computerized systems Maintain accurate records of repairs, servicing, and inspections Candidate Requirements: Proven experience as an HGV Technician/ Heavy Vehicle Mechanic Strong diagnostic and repair skills HGV licence preferred but not essential. Company Benefits: Salary up to £50,000 No Shift Work 20 days annual leave plus Bank Holidays If you feel that you have the relative skills/attributes to fulfil this role then please apply now for immediate consideration. The employer fully supports Equality in Employment. All employment is decided based on qualifications, merit and business need.
Apr 30, 2026
Full time
An excellent opportunity for an experienced HGV Technician to join a well-established company. Job Type: Full-Time, Permanent. Salary: Up To £50,000 Per Annum, Depending on Experience. Location: Ashford TN23. About The Role: The company are currently looking to recruit a skilled and experienced HGV Technician to join their team. You will be responsible for maintaining and repairing heavy goods vehicles (HGVs) across a mixed fleet including Volvo, Scania, Mercedes, DAF and Renault vehicles. This is a full-time position offering a salary of up to £50,000 per year, no shift work and you will be required to work two Saturday mornings per month. Key Responsibilities: Carry out routine maintenance and inspections on HGVs and trailers, including annual MOT preparation Diagnose and troubleshoot mechanical, electrical, and hydraulic faults Repair or replace faulty components, parts, or systems Perform vehicle servicing, including oil changes, filter replacements, and fluid checks Use hand tools and specialist equipment to complete repairs and maintenance tasks Assemble and disassemble vehicle components as required Conduct diagnostic tests using computerized systems Maintain accurate records of repairs, servicing, and inspections Candidate Requirements: Proven experience as an HGV Technician/ Heavy Vehicle Mechanic Strong diagnostic and repair skills HGV licence preferred but not essential. Company Benefits: Salary up to £50,000 No Shift Work 20 days annual leave plus Bank Holidays If you feel that you have the relative skills/attributes to fulfil this role then please apply now for immediate consideration. The employer fully supports Equality in Employment. All employment is decided based on qualifications, merit and business need.
Procters Coaches (North Yorkshire) Ltd
Gatenby, Yorkshire
Join Our Team at Leeming Bar Depot! Are you a skilled PCV technician looking for an exciting opportunity? Look no further! We are seeking a skilled and dependable Shift PSV Bus & Coach Technician to join our team in Leeming Bar, North Yorkshire . You will play a vital role in maintaining the safety, reliability, and roadworthiness of our modern fleet of Public Service Vehicles (PSVs), including buses and coaches. Key Responsibilities Perform scheduled servicing, inspections, and repairs on PSV vehicles. Diagnose and repair mechanical, electrical, pneumatic, and hydraulic faults. Prepare vehicles for MOT testing, ensuring compliance with DVSA safety and maintenance standards. Complete all relevant paperwork accurately, including job cards and inspection reports. Adhere to all health & safety policies and maintain a clean and safe work environment. Attend to urgent vehicle breakdowns or repairs during shift hours when required. Communicate additional defects or issues promptly to the Engineering Manager or Engineering Project Manager. Contribute to continuous improvement in workshop practices and operational efficiency. Requirements NVQ Level 3 (or equivalent) in Heavy Vehicle Maintenance or related field. Proven experience maintaining PSVs, coaches, buses, or HGVs. Strong knowledge of vehicle systems, including engines, suspension, braking, and electrics. Ability to work effectively on both early and late shifts. Full UK Driving Licence required ( Category D preferred but not essential). IRTEC accreditation desirable (or willingness to obtain it). High attention to detail and a strong commitment to safety, compliance, and quality. Working Conditions Shift-based workshop role: Early: 6:00 AM - 2:00 PM Late: 4:00 PM - 12:00 Midnight Occasional off-site work for breakdowns and urgent repairs. Full PPE and company uniform provided. What We Offer Structured shifts to promote work-life balance. Opportunity to work with a modern and well-maintained PSV fleet. Ongoing training and development, including IRTEC certification support. A professional, safety-led, and team-oriented environment. Interested? Apply now to become a key member of our experienced maintenance team-helping to keep our fleet on the road and our passengers moving safely every day. To apply, send your CV and cover letter to: Ashley Cowen - Philip Kenyon - For more information, contact us on: Job Type: Full-time Pay: £40,000.00-£45,000.00 per year Benefits: Company pension Flexitime Free parking On-site parking Ability to commute/relocate: Northallerton DL7 9DE: reliably commute or plan to relocate before starting work (required) Experience: LGV or PCV mechanical: 1 year (required) Work authorisation: United Kingdom (required) Work Location: In person
Oct 06, 2025
Full time
Join Our Team at Leeming Bar Depot! Are you a skilled PCV technician looking for an exciting opportunity? Look no further! We are seeking a skilled and dependable Shift PSV Bus & Coach Technician to join our team in Leeming Bar, North Yorkshire . You will play a vital role in maintaining the safety, reliability, and roadworthiness of our modern fleet of Public Service Vehicles (PSVs), including buses and coaches. Key Responsibilities Perform scheduled servicing, inspections, and repairs on PSV vehicles. Diagnose and repair mechanical, electrical, pneumatic, and hydraulic faults. Prepare vehicles for MOT testing, ensuring compliance with DVSA safety and maintenance standards. Complete all relevant paperwork accurately, including job cards and inspection reports. Adhere to all health & safety policies and maintain a clean and safe work environment. Attend to urgent vehicle breakdowns or repairs during shift hours when required. Communicate additional defects or issues promptly to the Engineering Manager or Engineering Project Manager. Contribute to continuous improvement in workshop practices and operational efficiency. Requirements NVQ Level 3 (or equivalent) in Heavy Vehicle Maintenance or related field. Proven experience maintaining PSVs, coaches, buses, or HGVs. Strong knowledge of vehicle systems, including engines, suspension, braking, and electrics. Ability to work effectively on both early and late shifts. Full UK Driving Licence required ( Category D preferred but not essential). IRTEC accreditation desirable (or willingness to obtain it). High attention to detail and a strong commitment to safety, compliance, and quality. Working Conditions Shift-based workshop role: Early: 6:00 AM - 2:00 PM Late: 4:00 PM - 12:00 Midnight Occasional off-site work for breakdowns and urgent repairs. Full PPE and company uniform provided. What We Offer Structured shifts to promote work-life balance. Opportunity to work with a modern and well-maintained PSV fleet. Ongoing training and development, including IRTEC certification support. A professional, safety-led, and team-oriented environment. Interested? Apply now to become a key member of our experienced maintenance team-helping to keep our fleet on the road and our passengers moving safely every day. To apply, send your CV and cover letter to: Ashley Cowen - Philip Kenyon - For more information, contact us on: Job Type: Full-time Pay: £40,000.00-£45,000.00 per year Benefits: Company pension Flexitime Free parking On-site parking Ability to commute/relocate: Northallerton DL7 9DE: reliably commute or plan to relocate before starting work (required) Experience: LGV or PCV mechanical: 1 year (required) Work authorisation: United Kingdom (required) Work Location: In person
Job Summary We are seeking a skilled Mechanic to join our team. The ideal candidate will be responsible for diagnosing, repairing, and maintaining HGV's and machinery. This role requires a strong understanding of mechanical systems and the ability to work efficiently in a fast-paced environment. The Mechanic will play a crucial role in ensuring that all equipment is safe and operational. Duties Conduct thorough inspections of vehicles and machinery to identify issues. Perform routine maintenance tasks such as oil changes, brake repairs, and tyre rotations. Diagnose mechanical problems using diagnostic tools and equipment. Repair or replace faulty components. Maintain accurate records of repairs and services performed. Ensure compliance with safety regulations and company policies. Collaborate with team members to improve processes and enhance service quality. Stay updated on industry trends and advancements in technology. Skills Strong knowledge of mechanical systems, including engines, hydraulics, and electrical systems. Proficient in using diagnostic tools and equipment effectively. Excellent problem-solving skills with attention to detail. Ability to work independently as well as part of a team. Good communication skills to interact with clients and colleagues. Relevant qualifications or certifications in automotive technology or mechanics are advantageous. Previous experience in a similar role is preferred but not essential for the right candidate willing to learn. Join us as we strive for excellence in service delivery while ensuring the highest standards of safety and quality in our operations. Job Types: Full-time, Permanent Pay: £45,200.00-£47,300.00 per year Benefits: On-site parking Work Location: In person Reference ID: Mechanic
Oct 06, 2025
Full time
Job Summary We are seeking a skilled Mechanic to join our team. The ideal candidate will be responsible for diagnosing, repairing, and maintaining HGV's and machinery. This role requires a strong understanding of mechanical systems and the ability to work efficiently in a fast-paced environment. The Mechanic will play a crucial role in ensuring that all equipment is safe and operational. Duties Conduct thorough inspections of vehicles and machinery to identify issues. Perform routine maintenance tasks such as oil changes, brake repairs, and tyre rotations. Diagnose mechanical problems using diagnostic tools and equipment. Repair or replace faulty components. Maintain accurate records of repairs and services performed. Ensure compliance with safety regulations and company policies. Collaborate with team members to improve processes and enhance service quality. Stay updated on industry trends and advancements in technology. Skills Strong knowledge of mechanical systems, including engines, hydraulics, and electrical systems. Proficient in using diagnostic tools and equipment effectively. Excellent problem-solving skills with attention to detail. Ability to work independently as well as part of a team. Good communication skills to interact with clients and colleagues. Relevant qualifications or certifications in automotive technology or mechanics are advantageous. Previous experience in a similar role is preferred but not essential for the right candidate willing to learn. Join us as we strive for excellence in service delivery while ensuring the highest standards of safety and quality in our operations. Job Types: Full-time, Permanent Pay: £45,200.00-£47,300.00 per year Benefits: On-site parking Work Location: In person Reference ID: Mechanic
Excellent Salary HOURS: 40 HOURS PER WEEK Night Shift Monday - Thursday Due to our continued success as one of the country's leading suppliers of heavy commercial vehicle Hire we have an exciting opportunity for an experienced HGV Technician / Mechanic who takes pride in providing excellent customer service and has a passion for working with the best. Based at our Cheshire branch, you will have the opportunity to independently perform spot repairs on components in all mechanical, pneumatic and hydraulic vehicle systems and components by finding and understanding the service information within a professional workshop. You will also receive excellent training at our bespoke training centre to develop you to the next level. RESPONSIBILITIES: Carry out simple work on the vehicle's electrical system and use information from the wiring diagrams and manuals for electrical components Perform allocated work within the time frame given to the customers Diagnose, check and set the mechanical systems Set up accessories and specific equipment on the vehicles As required, attend to disabled vehicles at the roadside or on customer's premises, following appropriate routines and procedures including roadside safety laws and regulations Provide technical advice to customers and colleagues Carry out routine inspections, maintenance and repairs on all makes of vehicles and trailers to VOSA standard Ensure all vehicles worked upon are handled carefully and that all precautions are taken whilst on the premises Liaise with parts department to attain parts Ensure Health & Safety regulations and safe working practices are adhered to Ensure appropriate clocking is made, all job cards and service sheets are completed in a timely manner Maintain a thorough and current product knowledge and attend training courses KEY REQUIREMENTS FOR THE ROLE: Technical qualification (City & Guilds or NVQ qualified technician) or proven experience repairing & maintaining vehicles Ability to work within guidelines given and to strict deadlines Ability to work under pressure Ability to actively seek solutions to problems Ability to work as part of a team Good verbal communication skills Excellent customer care skills Flexibility to undertake a wide range of tasks Awareness and understanding of health and safety requirements LGV/HGV/PCV licence an advantage Working for Firow is not just about the job. It's about you too, and this is where the company goes the extra mile, and provides an industry leading employment package. Firow is dedicated to delivering exceptional products and services to our customers and the successful candidate will reflect our core values; Customer first, Respect for the Individual and Quality in all we do. If you feel you have the skills and expertise for this challenging role then please apply today. Firow Ltd is an equal opportunities employer. Benefits: On-site parking Job Types: Full-time, Permanent Pay: £41,600.00-£42,500.00 per year Experience: HGV REPAIR: 1 year (preferred) Work Location: In person Reference ID: HGV NIGHT SHIFT
Oct 04, 2025
Full time
Excellent Salary HOURS: 40 HOURS PER WEEK Night Shift Monday - Thursday Due to our continued success as one of the country's leading suppliers of heavy commercial vehicle Hire we have an exciting opportunity for an experienced HGV Technician / Mechanic who takes pride in providing excellent customer service and has a passion for working with the best. Based at our Cheshire branch, you will have the opportunity to independently perform spot repairs on components in all mechanical, pneumatic and hydraulic vehicle systems and components by finding and understanding the service information within a professional workshop. You will also receive excellent training at our bespoke training centre to develop you to the next level. RESPONSIBILITIES: Carry out simple work on the vehicle's electrical system and use information from the wiring diagrams and manuals for electrical components Perform allocated work within the time frame given to the customers Diagnose, check and set the mechanical systems Set up accessories and specific equipment on the vehicles As required, attend to disabled vehicles at the roadside or on customer's premises, following appropriate routines and procedures including roadside safety laws and regulations Provide technical advice to customers and colleagues Carry out routine inspections, maintenance and repairs on all makes of vehicles and trailers to VOSA standard Ensure all vehicles worked upon are handled carefully and that all precautions are taken whilst on the premises Liaise with parts department to attain parts Ensure Health & Safety regulations and safe working practices are adhered to Ensure appropriate clocking is made, all job cards and service sheets are completed in a timely manner Maintain a thorough and current product knowledge and attend training courses KEY REQUIREMENTS FOR THE ROLE: Technical qualification (City & Guilds or NVQ qualified technician) or proven experience repairing & maintaining vehicles Ability to work within guidelines given and to strict deadlines Ability to work under pressure Ability to actively seek solutions to problems Ability to work as part of a team Good verbal communication skills Excellent customer care skills Flexibility to undertake a wide range of tasks Awareness and understanding of health and safety requirements LGV/HGV/PCV licence an advantage Working for Firow is not just about the job. It's about you too, and this is where the company goes the extra mile, and provides an industry leading employment package. Firow is dedicated to delivering exceptional products and services to our customers and the successful candidate will reflect our core values; Customer first, Respect for the Individual and Quality in all we do. If you feel you have the skills and expertise for this challenging role then please apply today. Firow Ltd is an equal opportunities employer. Benefits: On-site parking Job Types: Full-time, Permanent Pay: £41,600.00-£42,500.00 per year Experience: HGV REPAIR: 1 year (preferred) Work Location: In person Reference ID: HGV NIGHT SHIFT
Procters Coaches (North Yorkshire) Ltd
Gatenby, Yorkshire
Join Our Team at Leeming Bar Depot! Are you a skilled PCV technician looking for an exciting opportunity? Look no further! We are seeking a skilled and dependable Shift PSV Bus & Coach Technician to join our team in Leeming Bar, North Yorkshire . You will play a vital role in maintaining the safety, reliability, and roadworthiness of our modern fleet of Public Service Vehicles (PSVs), including buses and coaches. Key Responsibilities Perform scheduled servicing, inspections, and repairs on PSV vehicles. Diagnose and repair mechanical, electrical, pneumatic, and hydraulic faults. Prepare vehicles for MOT testing, ensuring compliance with DVSA safety and maintenance standards. Complete all relevant paperwork accurately, including job cards and inspection reports. Adhere to all health & safety policies and maintain a clean and safe work environment. Attend to urgent vehicle breakdowns or repairs during shift hours when required. Communicate additional defects or issues promptly to the Engineering Manager or Engineering Project Manager. Contribute to continuous improvement in workshop practices and operational efficiency. Requirements NVQ Level 3 (or equivalent) in Heavy Vehicle Maintenance or related field. Proven experience maintaining PSVs, coaches, buses, or HGVs. Strong knowledge of vehicle systems, including engines, suspension, braking, and electrics. Ability to work effectively on both early and late shifts. Full UK Driving Licence required ( Category D preferred but not essential). IRTEC accreditation desirable (or willingness to obtain it). High attention to detail and a strong commitment to safety, compliance, and quality. Working Conditions Shift-based workshop role: Early: 6:00 AM - 2:00 PM Late: 4:00 PM - 12:00 Midnight Occasional off-site work for breakdowns and urgent repairs. Full PPE and company uniform provided. What We Offer Structured shifts to promote work-life balance. Opportunity to work with a modern and well-maintained PSV fleet. Ongoing training and development, including IRTEC certification support. A professional, safety-led, and team-oriented environment. Interested? Apply now to become a key member of our experienced maintenance team-helping to keep our fleet on the road and our passengers moving safely every day. To apply, send your CV and cover letter to: Ashley Cowen - Philip Kenyon - For more information, contact us on: Job Type: Full-time Pay: £40,000.00-£45,000.00 per year Benefits: Company pension Flexitime Free parking On-site parking Ability to commute/relocate: Northallerton DL7 9DE: reliably commute or plan to relocate before starting work (required) Experience: LGV or PCV mechanical: 1 year (required) Work authorisation: United Kingdom (required) Work Location: In person
Oct 03, 2025
Full time
Join Our Team at Leeming Bar Depot! Are you a skilled PCV technician looking for an exciting opportunity? Look no further! We are seeking a skilled and dependable Shift PSV Bus & Coach Technician to join our team in Leeming Bar, North Yorkshire . You will play a vital role in maintaining the safety, reliability, and roadworthiness of our modern fleet of Public Service Vehicles (PSVs), including buses and coaches. Key Responsibilities Perform scheduled servicing, inspections, and repairs on PSV vehicles. Diagnose and repair mechanical, electrical, pneumatic, and hydraulic faults. Prepare vehicles for MOT testing, ensuring compliance with DVSA safety and maintenance standards. Complete all relevant paperwork accurately, including job cards and inspection reports. Adhere to all health & safety policies and maintain a clean and safe work environment. Attend to urgent vehicle breakdowns or repairs during shift hours when required. Communicate additional defects or issues promptly to the Engineering Manager or Engineering Project Manager. Contribute to continuous improvement in workshop practices and operational efficiency. Requirements NVQ Level 3 (or equivalent) in Heavy Vehicle Maintenance or related field. Proven experience maintaining PSVs, coaches, buses, or HGVs. Strong knowledge of vehicle systems, including engines, suspension, braking, and electrics. Ability to work effectively on both early and late shifts. Full UK Driving Licence required ( Category D preferred but not essential). IRTEC accreditation desirable (or willingness to obtain it). High attention to detail and a strong commitment to safety, compliance, and quality. Working Conditions Shift-based workshop role: Early: 6:00 AM - 2:00 PM Late: 4:00 PM - 12:00 Midnight Occasional off-site work for breakdowns and urgent repairs. Full PPE and company uniform provided. What We Offer Structured shifts to promote work-life balance. Opportunity to work with a modern and well-maintained PSV fleet. Ongoing training and development, including IRTEC certification support. A professional, safety-led, and team-oriented environment. Interested? Apply now to become a key member of our experienced maintenance team-helping to keep our fleet on the road and our passengers moving safely every day. To apply, send your CV and cover letter to: Ashley Cowen - Philip Kenyon - For more information, contact us on: Job Type: Full-time Pay: £40,000.00-£45,000.00 per year Benefits: Company pension Flexitime Free parking On-site parking Ability to commute/relocate: Northallerton DL7 9DE: reliably commute or plan to relocate before starting work (required) Experience: LGV or PCV mechanical: 1 year (required) Work authorisation: United Kingdom (required) Work Location: In person
Excellent Salary HOURS: 40 HOURS PER WEEK Night Shift Monday - Thursday Due to our continued success as one of the country's leading suppliers of heavy commercial vehicle Hire we have an exciting opportunity for an experienced HGV Technician / Mechanic who takes pride in providing excellent customer service and has a passion for working with the best. Based at our Cheshire branch, you will have the opportunity to independently perform spot repairs on components in all mechanical, pneumatic and hydraulic vehicle systems and components by finding and understanding the service information within a professional workshop. You will also receive excellent training at our bespoke training centre to develop you to the next level. RESPONSIBILITIES: Carry out simple work on the vehicle's electrical system and use information from the wiring diagrams and manuals for electrical components Perform allocated work within the time frame given to the customers Diagnose, check and set the mechanical systems Set up accessories and specific equipment on the vehicles As required, attend to disabled vehicles at the roadside or on customer's premises, following appropriate routines and procedures including roadside safety laws and regulations Provide technical advice to customers and colleagues Carry out routine inspections, maintenance and repairs on all makes of vehicles and trailers to VOSA standard Ensure all vehicles worked upon are handled carefully and that all precautions are taken whilst on the premises Liaise with parts department to attain parts Ensure Health & Safety regulations and safe working practices are adhered to Ensure appropriate clocking is made, all job cards and service sheets are completed in a timely manner Maintain a thorough and current product knowledge and attend training courses KEY REQUIREMENTS FOR THE ROLE: Technical qualification (City & Guilds or NVQ qualified technician) or proven experience repairing & maintaining vehicles Ability to work within guidelines given and to strict deadlines Ability to work under pressure Ability to actively seek solutions to problems Ability to work as part of a team Good verbal communication skills Excellent customer care skills Flexibility to undertake a wide range of tasks Awareness and understanding of health and safety requirements LGV/HGV/PCV licence an advantage Working for Firow is not just about the job. It's about you too, and this is where the company goes the extra mile, and provides an industry leading employment package. Firow is dedicated to delivering exceptional products and services to our customers and the successful candidate will reflect our core values; Customer first, Respect for the Individual and Quality in all we do. If you feel you have the skills and expertise for this challenging role then please apply today. Firow Ltd is an equal opportunities employer. Benefits: On-site parking Job Types: Full-time, Permanent Pay: £41,600.00-£42,500.00 per year Experience: HGV REPAIR: 1 year (preferred) Work Location: In person Reference ID: HGV NIGHT SHIFT
Oct 03, 2025
Full time
Excellent Salary HOURS: 40 HOURS PER WEEK Night Shift Monday - Thursday Due to our continued success as one of the country's leading suppliers of heavy commercial vehicle Hire we have an exciting opportunity for an experienced HGV Technician / Mechanic who takes pride in providing excellent customer service and has a passion for working with the best. Based at our Cheshire branch, you will have the opportunity to independently perform spot repairs on components in all mechanical, pneumatic and hydraulic vehicle systems and components by finding and understanding the service information within a professional workshop. You will also receive excellent training at our bespoke training centre to develop you to the next level. RESPONSIBILITIES: Carry out simple work on the vehicle's electrical system and use information from the wiring diagrams and manuals for electrical components Perform allocated work within the time frame given to the customers Diagnose, check and set the mechanical systems Set up accessories and specific equipment on the vehicles As required, attend to disabled vehicles at the roadside or on customer's premises, following appropriate routines and procedures including roadside safety laws and regulations Provide technical advice to customers and colleagues Carry out routine inspections, maintenance and repairs on all makes of vehicles and trailers to VOSA standard Ensure all vehicles worked upon are handled carefully and that all precautions are taken whilst on the premises Liaise with parts department to attain parts Ensure Health & Safety regulations and safe working practices are adhered to Ensure appropriate clocking is made, all job cards and service sheets are completed in a timely manner Maintain a thorough and current product knowledge and attend training courses KEY REQUIREMENTS FOR THE ROLE: Technical qualification (City & Guilds or NVQ qualified technician) or proven experience repairing & maintaining vehicles Ability to work within guidelines given and to strict deadlines Ability to work under pressure Ability to actively seek solutions to problems Ability to work as part of a team Good verbal communication skills Excellent customer care skills Flexibility to undertake a wide range of tasks Awareness and understanding of health and safety requirements LGV/HGV/PCV licence an advantage Working for Firow is not just about the job. It's about you too, and this is where the company goes the extra mile, and provides an industry leading employment package. Firow is dedicated to delivering exceptional products and services to our customers and the successful candidate will reflect our core values; Customer first, Respect for the Individual and Quality in all we do. If you feel you have the skills and expertise for this challenging role then please apply today. Firow Ltd is an equal opportunities employer. Benefits: On-site parking Job Types: Full-time, Permanent Pay: £41,600.00-£42,500.00 per year Experience: HGV REPAIR: 1 year (preferred) Work Location: In person Reference ID: HGV NIGHT SHIFT
Fendt-Krone Agricultural Technician Location : Llanwrda, Carmarthenshire Job Type : Full-time, Permanent Arwel's Agri Services is a leading agricultural machinery dealer in West Wales covering Ceredigion ,Carmarthenshire and the Pembrokeshire regions, representing world-class brands including Fendt and Krone. We are seeking an experienced and motivated Agricultural Technician to join our dedicated workshop team. You will be responsible for the servicing, maintenance, and repair of a diverse range of high-tech agricultural machinery, including Fendt tractors and Krone forage and baling equipment. Key responsibilities Diagnostics and repair: Perform advanced diagnostics, servicing, and repairs on Fendt and Krone machinery, including tractors, combines, balers, and forage harvesters. Mechanical and electrical work: Troubleshoot and fix complex mechanical, electrical, and hydraulic faults using specialized equipment and manufacturer software. Routine maintenance: Conduct routine inspections and preventative maintenance to ensure optimal machine performance. Pre-delivery inspections (PDI): Assemble and perform PDI on new machinery before it is delivered to customers. Field service: Travel to customer sites for on-farm service and repairs, particularly during peak seasons. Customer support: Provide professional and knowledgeable technical support to customers. Training and development: Stay up-to-date with product advancements and technological innovations by attending manufacturer-specific training sessions. Record-keeping: Maintain accurate and detailed records of all work performed. Skills and qualifications Proven experience as an Agricultural Technician or Service Engineer, with specific knowledge of Fendt and Krone equipment preferred but not essential as full manufacturers training will be provided. Strong technical knowledge of mechanical, electrical, and hydraulic systems. Excellent diagnostic and problem-solving skills. Ability to work independently and manage your own workload effectively. A professional and flexible approach, with the willingness to work extended hours during peak seasons. Strong communication and customer service skills. A full UK driving license is essential. What we offer A very competitive salary based on experience. Comprehensive manufacturer-specific training to further your career. Opportunity to work with cutting-edge, high-tech agricultural machinery. A supportive and rewarding team environment. Company Pension / Company vehicle for field service. How to apply: If you have a passion for agricultural machinery and the skills to succeed in this role, please send your CV and a covering letter to You can also apply for this role by clicking the Apply Button.
Oct 03, 2025
Full time
Fendt-Krone Agricultural Technician Location : Llanwrda, Carmarthenshire Job Type : Full-time, Permanent Arwel's Agri Services is a leading agricultural machinery dealer in West Wales covering Ceredigion ,Carmarthenshire and the Pembrokeshire regions, representing world-class brands including Fendt and Krone. We are seeking an experienced and motivated Agricultural Technician to join our dedicated workshop team. You will be responsible for the servicing, maintenance, and repair of a diverse range of high-tech agricultural machinery, including Fendt tractors and Krone forage and baling equipment. Key responsibilities Diagnostics and repair: Perform advanced diagnostics, servicing, and repairs on Fendt and Krone machinery, including tractors, combines, balers, and forage harvesters. Mechanical and electrical work: Troubleshoot and fix complex mechanical, electrical, and hydraulic faults using specialized equipment and manufacturer software. Routine maintenance: Conduct routine inspections and preventative maintenance to ensure optimal machine performance. Pre-delivery inspections (PDI): Assemble and perform PDI on new machinery before it is delivered to customers. Field service: Travel to customer sites for on-farm service and repairs, particularly during peak seasons. Customer support: Provide professional and knowledgeable technical support to customers. Training and development: Stay up-to-date with product advancements and technological innovations by attending manufacturer-specific training sessions. Record-keeping: Maintain accurate and detailed records of all work performed. Skills and qualifications Proven experience as an Agricultural Technician or Service Engineer, with specific knowledge of Fendt and Krone equipment preferred but not essential as full manufacturers training will be provided. Strong technical knowledge of mechanical, electrical, and hydraulic systems. Excellent diagnostic and problem-solving skills. Ability to work independently and manage your own workload effectively. A professional and flexible approach, with the willingness to work extended hours during peak seasons. Strong communication and customer service skills. A full UK driving license is essential. What we offer A very competitive salary based on experience. Comprehensive manufacturer-specific training to further your career. Opportunity to work with cutting-edge, high-tech agricultural machinery. A supportive and rewarding team environment. Company Pension / Company vehicle for field service. How to apply: If you have a passion for agricultural machinery and the skills to succeed in this role, please send your CV and a covering letter to You can also apply for this role by clicking the Apply Button.
Mechanical Maintenance Technician Location : Peterborough Hourly Rate: £30 per hour Umbrella Duration : 12 months (with likely extension) Working Arrangements: On-site in Peterborough (no remote/flexible working) We are looking for a skilled Mechanical Maintenance Technician to join our client's team in Peterborough. This is a diverse and hands-on role, offering the opportunity to work across multiple teams, gain company-wide exposure, and continue to develop your technical career.What You'll Be Doing Carrying out a wide range of mechanical maintenance tasks in a busy facility/engine test environment. Supporting and servicing boilers (accreditation highly desirable). Reading and interpreting mechanical, hydraulic, pneumatic, and electrical drawings and schematics. Ensuring compliance with maintenance processes, quality objectives, and safety standards. Working closely with a team of 10 technicians and collaborating with wider facility teams. Using Microsoft Office and in-house CAT systems for reporting and maintenance tracking. What We're Looking For 10 years' experience (including NVQ) in manufacturing, maintenance, or plant equipment environments. Strong knowledge of maintenance processes, tools, and materials. Ability to work with precision while maintaining quality standards. NVQ Level 3 (minimum) in a relevant discipline - equivalent experience considered. Boiler servicing accreditation and/or facility test cell experience highly advantageous. Industrial or plant maintenance background preferred; food industry maintenance also considered. If you would like to be considered for this role please don't hesitate to click apply or call Daniel McShane on for more information. Inclusion statement Outsource UK is committed to creating a diverse and inclusive environment and is proud to be an equal opportunity employer. You'll receive fair consideration for your application regardless of your race, religion or belief, gender, gender identity or expression, sex, sexual orientation, disability, marriage and civil partnership, pregnancy and maternity, or age.We're proud Corporate Members of the Hidden Disabilities Sunflower. If you need any adjustments at any stage - from application to interview or in your new role - please let us know. We're here to support you every step of the way.We believe diversity of thought and background makes us stronger and we welcome applications from people of all backgrounds and life experiences.
Oct 02, 2025
Full time
Mechanical Maintenance Technician Location : Peterborough Hourly Rate: £30 per hour Umbrella Duration : 12 months (with likely extension) Working Arrangements: On-site in Peterborough (no remote/flexible working) We are looking for a skilled Mechanical Maintenance Technician to join our client's team in Peterborough. This is a diverse and hands-on role, offering the opportunity to work across multiple teams, gain company-wide exposure, and continue to develop your technical career.What You'll Be Doing Carrying out a wide range of mechanical maintenance tasks in a busy facility/engine test environment. Supporting and servicing boilers (accreditation highly desirable). Reading and interpreting mechanical, hydraulic, pneumatic, and electrical drawings and schematics. Ensuring compliance with maintenance processes, quality objectives, and safety standards. Working closely with a team of 10 technicians and collaborating with wider facility teams. Using Microsoft Office and in-house CAT systems for reporting and maintenance tracking. What We're Looking For 10 years' experience (including NVQ) in manufacturing, maintenance, or plant equipment environments. Strong knowledge of maintenance processes, tools, and materials. Ability to work with precision while maintaining quality standards. NVQ Level 3 (minimum) in a relevant discipline - equivalent experience considered. Boiler servicing accreditation and/or facility test cell experience highly advantageous. Industrial or plant maintenance background preferred; food industry maintenance also considered. If you would like to be considered for this role please don't hesitate to click apply or call Daniel McShane on for more information. Inclusion statement Outsource UK is committed to creating a diverse and inclusive environment and is proud to be an equal opportunity employer. You'll receive fair consideration for your application regardless of your race, religion or belief, gender, gender identity or expression, sex, sexual orientation, disability, marriage and civil partnership, pregnancy and maternity, or age.We're proud Corporate Members of the Hidden Disabilities Sunflower. If you need any adjustments at any stage - from application to interview or in your new role - please let us know. We're here to support you every step of the way.We believe diversity of thought and background makes us stronger and we welcome applications from people of all backgrounds and life experiences.
