We are currently recruiting for an experienced Hydraulics Fitter to join a well-established and growing engineering business. This is an excellent opportunity for a hands-on individual with a solid background in hydraulic systems to work on a variety of equipment in a fast-paced environment. Key Responsibilities Assemble, install, and maintain hydraulic systems and components Diagnose faults and carry out repairs on hydraulic equipment Read and interpret hydraulic schematics and technical drawings Conduct pressure testing and system checks to ensure performance and safety Replace hoses, seals, valves, pumps, and cylinders as required Carry out preventative maintenance to minimise downtime Work both in the workshop and occasionally on-site (if required) Ensure all work is completed in line with health & safety regulations Requirements Proven experience working as a Hydraulics Fitter or similar role Strong knowledge of hydraulic systems, components, and troubleshooting Ability to read and interpret engineering drawings and schematics Experience with fault finding and diagnostics Good mechanical aptitude and hands-on skills Full UK driving licence (preferred/required depending on role) Relevant engineering qualification (advantageous but not essential) Experience with mobile plant, heavy machinery, or industrial equipment Welding or fabrication experience Knowledge of pneumatics or electrical systems
May 04, 2026
Full time
We are currently recruiting for an experienced Hydraulics Fitter to join a well-established and growing engineering business. This is an excellent opportunity for a hands-on individual with a solid background in hydraulic systems to work on a variety of equipment in a fast-paced environment. Key Responsibilities Assemble, install, and maintain hydraulic systems and components Diagnose faults and carry out repairs on hydraulic equipment Read and interpret hydraulic schematics and technical drawings Conduct pressure testing and system checks to ensure performance and safety Replace hoses, seals, valves, pumps, and cylinders as required Carry out preventative maintenance to minimise downtime Work both in the workshop and occasionally on-site (if required) Ensure all work is completed in line with health & safety regulations Requirements Proven experience working as a Hydraulics Fitter or similar role Strong knowledge of hydraulic systems, components, and troubleshooting Ability to read and interpret engineering drawings and schematics Experience with fault finding and diagnostics Good mechanical aptitude and hands-on skills Full UK driving licence (preferred/required depending on role) Relevant engineering qualification (advantageous but not essential) Experience with mobile plant, heavy machinery, or industrial equipment Welding or fabrication experience Knowledge of pneumatics or electrical systems
About the role - Assembly Fitter First Achieve's Engineering Division are seeking an Assembly Fitter for a global leader in today's top performing industrial pumps and motors sector. As an Assembly Fitter, you will ensure the units are assembled to specifications on time and in full and at the required quality standards, whilst being in full compliance with all health and safety and quality requirements. What you will do: Read detailed engineering drawings. Understand quality plans and procedures. Assemble/disassemble & Rig/de-rig all units. Paint and preparing units for despatch. Demonstrate competent use of measuring equipment. Produce dimensional reports and strip inspections reports. Conduct pressure testing on components and units whilst ensuring that the relevant documents are completed. Demonstrate ability to safely use air powered and electrical tools. Book onto and close operations on completion using the ERP system. Work within team and all cross functional teams to ensure contractual obligations are achieved Right First Time (RFT) and On Time in Full (OTIF). Ensure that regular 5S duties are carried out to sustain a clean environment. Adhere to all health and safety aspects related to Assembly and ensure that a zero-accident environment is maintained. Maintain high standards at all times, report problems or deviations associated with H&S to the responsible Manager/Supervisor. Ensure that Health & Safety, Quality and Environment assurance, control and regulatory compliance are demonstrated, by working in accordance with the documented Health, Safety and Environmental procedures and instructions. What you will need: 4 years' experience working in a manufacturing environment utilising fitting skill. Recognised qualification in a mechanical discipline. Effective communication and problem-solving skills. Time served craft apprenticeship and experience with rotating assemblies are desirable. All candidates must be able to prove that they have the right to work in the UK. Why work for us? Competitive compensation and benefits packages. Excellent training and development opportunities. Generous annual leave and option to purchase additional holidays. Contributory pension plan with associated life assurance. Recognition reward schemes. Healthcare scheme offering cash back on medical services (optician/dental etc.). Virtual GP surgery and employee assistance programme. Cycle-to-work scheme. Range of employee discounts (including gyms, high street and online retailers).
May 04, 2026
Full time
About the role - Assembly Fitter First Achieve's Engineering Division are seeking an Assembly Fitter for a global leader in today's top performing industrial pumps and motors sector. As an Assembly Fitter, you will ensure the units are assembled to specifications on time and in full and at the required quality standards, whilst being in full compliance with all health and safety and quality requirements. What you will do: Read detailed engineering drawings. Understand quality plans and procedures. Assemble/disassemble & Rig/de-rig all units. Paint and preparing units for despatch. Demonstrate competent use of measuring equipment. Produce dimensional reports and strip inspections reports. Conduct pressure testing on components and units whilst ensuring that the relevant documents are completed. Demonstrate ability to safely use air powered and electrical tools. Book onto and close operations on completion using the ERP system. Work within team and all cross functional teams to ensure contractual obligations are achieved Right First Time (RFT) and On Time in Full (OTIF). Ensure that regular 5S duties are carried out to sustain a clean environment. Adhere to all health and safety aspects related to Assembly and ensure that a zero-accident environment is maintained. Maintain high standards at all times, report problems or deviations associated with H&S to the responsible Manager/Supervisor. Ensure that Health & Safety, Quality and Environment assurance, control and regulatory compliance are demonstrated, by working in accordance with the documented Health, Safety and Environmental procedures and instructions. What you will need: 4 years' experience working in a manufacturing environment utilising fitting skill. Recognised qualification in a mechanical discipline. Effective communication and problem-solving skills. Time served craft apprenticeship and experience with rotating assemblies are desirable. All candidates must be able to prove that they have the right to work in the UK. Why work for us? Competitive compensation and benefits packages. Excellent training and development opportunities. Generous annual leave and option to purchase additional holidays. Contributory pension plan with associated life assurance. Recognition reward schemes. Healthcare scheme offering cash back on medical services (optician/dental etc.). Virtual GP surgery and employee assistance programme. Cycle-to-work scheme. Range of employee discounts (including gyms, high street and online retailers).
Mechanical Fitter / Mechanical Maintenance Engineer £40,000 Days Role (Monday-Friday) 33 Days Holiday 3% Company Pension Contribution Healthcare Cashplan 2x Salary Death in Service Are you an experienced Mechanical Fitter or Maintenance Engineer looking for a stable days-based role with a well-established business? We are looking for a skilled and hands-on Mechanical Maintenance Engineer to join a growing engineering team. This role is ideal for someone who can hit the ground running, bringing strong mechanical knowledge and experience from a heavy or medium engineering environment. As a Mechanical Fitter / Maintenance Engineer your responsibilities will include: Carrying out mechanical maintenance, repair, and installation work across a range of plant equipment. Working on gearboxes, motors, pulleys, couplings, fans, pumps, mixers, bearings, and rollers. Completing fabrication work including MIG and MMA welding (TIG beneficial). Supporting site projects, upgrades, and continuous improvement activities. Undertaking milling and turning tasks where required. Responding to breakdowns and carrying out fault finding efficiently. Performing planned preventative maintenance (PPM) and logging all work via systems such as Pirana. Maintaining and servicing L.E.V systems including filter changes and duct cleaning. Managing stores, ordering spare parts, and ensuring stock levels are maintained. Completing LOLER testing and ensuring compliance with safety standards. Maintaining high standards of housekeeping across the site. Ensuring all required training (e.g. iHASCO) is kept up to date. Essential Skills & Experience: ONC, HNC or City & Guilds qualified in a relevant discipline. Strong experience with hydraulics and pneumatics. MIG and MMA welding experience is essential (TIG advantageous). Background in heavy or medium engineering environments. Lifting and slinging experience. Computer literate, including Microsoft Office and PPM systems (e.g. Pirana). Full UK driving licence. Able to work independently and bring experience to immediately add value.
May 02, 2026
Full time
Mechanical Fitter / Mechanical Maintenance Engineer £40,000 Days Role (Monday-Friday) 33 Days Holiday 3% Company Pension Contribution Healthcare Cashplan 2x Salary Death in Service Are you an experienced Mechanical Fitter or Maintenance Engineer looking for a stable days-based role with a well-established business? We are looking for a skilled and hands-on Mechanical Maintenance Engineer to join a growing engineering team. This role is ideal for someone who can hit the ground running, bringing strong mechanical knowledge and experience from a heavy or medium engineering environment. As a Mechanical Fitter / Maintenance Engineer your responsibilities will include: Carrying out mechanical maintenance, repair, and installation work across a range of plant equipment. Working on gearboxes, motors, pulleys, couplings, fans, pumps, mixers, bearings, and rollers. Completing fabrication work including MIG and MMA welding (TIG beneficial). Supporting site projects, upgrades, and continuous improvement activities. Undertaking milling and turning tasks where required. Responding to breakdowns and carrying out fault finding efficiently. Performing planned preventative maintenance (PPM) and logging all work via systems such as Pirana. Maintaining and servicing L.E.V systems including filter changes and duct cleaning. Managing stores, ordering spare parts, and ensuring stock levels are maintained. Completing LOLER testing and ensuring compliance with safety standards. Maintaining high standards of housekeeping across the site. Ensuring all required training (e.g. iHASCO) is kept up to date. Essential Skills & Experience: ONC, HNC or City & Guilds qualified in a relevant discipline. Strong experience with hydraulics and pneumatics. MIG and MMA welding experience is essential (TIG advantageous). Background in heavy or medium engineering environments. Lifting and slinging experience. Computer literate, including Microsoft Office and PPM systems (e.g. Pirana). Full UK driving licence. Able to work independently and bring experience to immediately add value.
Telehandler Driver - CPCS Lifton, Devon, PL16 0AA Monday - Friday 7.30am - 5.30pm Contract Position: Minimum 4 months leading to further work The company is a UK leading organisation specialising in major mechanical and electrical installations within the food process industry. The huge range of work carried out by the company includes process pipework and plant installation along with planned and preventive maintenance. This is a fantastic opportunity for Telehandler Driver CPCS to join the company supporting a major project in Lifton, Devon. Duties As an experienced and suitably qualified Telehandler Driver CPCS you will be working within a Food production facility in Lifton, Devon on a project to remove and re install process pipework and equipment. The primary duties will be to safely unload and distribute as necessary; all new process equipment and pipe spools delivered to site. Specific items will include high value pumps, motors, valve sets and one-off pieces of specialist equipment. Other duties will include assisting fitters with basic installation works, typically tightening bolts, painting pipework and installing pipework. Full training will be given for this aspect of the job. About You Based ideally in Lifton, Devon you will need to live within a commutable distance of PL16 0AA. Demonstrable experience of operating a rough terrain telescopic forklift with 9m boom. The machine you'll be driving will most likely be a 9.55m Merlo P72.10 Telehandler 7200kg. Current in date CPCS Telehandler with boom licence is required for this role. Interested? In return for your experience, you will receive an hourly rate between 18.00PAYE and 24.00 CIS as well as a range of benefits. Please get in touch by sending your current CV or calling David on (phone number removed) and we can discuss your application in more detail. This job starts as soon as possible. Guidant, Carbon60, Lorien & SRG - The Impellam Group Portfolio are acting as an Employment Business in relation to this vacancy.
May 01, 2026
Contractor
Telehandler Driver - CPCS Lifton, Devon, PL16 0AA Monday - Friday 7.30am - 5.30pm Contract Position: Minimum 4 months leading to further work The company is a UK leading organisation specialising in major mechanical and electrical installations within the food process industry. The huge range of work carried out by the company includes process pipework and plant installation along with planned and preventive maintenance. This is a fantastic opportunity for Telehandler Driver CPCS to join the company supporting a major project in Lifton, Devon. Duties As an experienced and suitably qualified Telehandler Driver CPCS you will be working within a Food production facility in Lifton, Devon on a project to remove and re install process pipework and equipment. The primary duties will be to safely unload and distribute as necessary; all new process equipment and pipe spools delivered to site. Specific items will include high value pumps, motors, valve sets and one-off pieces of specialist equipment. Other duties will include assisting fitters with basic installation works, typically tightening bolts, painting pipework and installing pipework. Full training will be given for this aspect of the job. About You Based ideally in Lifton, Devon you will need to live within a commutable distance of PL16 0AA. Demonstrable experience of operating a rough terrain telescopic forklift with 9m boom. The machine you'll be driving will most likely be a 9.55m Merlo P72.10 Telehandler 7200kg. Current in date CPCS Telehandler with boom licence is required for this role. Interested? In return for your experience, you will receive an hourly rate between 18.00PAYE and 24.00 CIS as well as a range of benefits. Please get in touch by sending your current CV or calling David on (phone number removed) and we can discuss your application in more detail. This job starts as soon as possible. Guidant, Carbon60, Lorien & SRG - The Impellam Group Portfolio are acting as an Employment Business in relation to this vacancy.
Position: Diesel EngineerLocation: Dalcross, InvernessSalary: £34,000 My client is a leading supplier and maintainer of Pumping and Power Generation equipment across England. They are looking to bring on board a Regional Service Engineer to look after their Power Generation sets across the North of Scotland. The ideal candidate will have hands on Generator Experience, will have experience across fault finding, diagnosis, maintenance and repair of Pumping or Power systems and will be based locally to Inverness. You will need a full Driving licence for this position. Service Engineer Position Overview To service equipment on customer sites and to respond to call-outs when needed To work closely with the Hire Controller, Driver and Fitters to ensure all hires proceed smoothly To work on the repair and maintenance of Generators To service, repair and overhaul equipment and associated components both within the depot, at customer premises and third-party sites To assist with the loading and unloading of pumps and generators onto the lorry for deliveries through the use of Hi-Ab Lorry Mounted Crane and Forklift Truck Travelling throughout the North of Scotland as required Service Engineer Position Requirements Previous experience in a Service Engineer position essential with the ability to work autonomously Strong working knowledge of Diesel Engines and Pumps First-hand experience with Fault Finding, Diagnosis, Maintenance and Repair ECS Card / CSCS Card desirable Full Driving licence Based within a commutable distance of Inverness Service Engineer Position Remuneration Salary £34,000 per annum Company Van, Fuel card, Specialist Tools provided 40 hours a week Monday - Friday 8:00 - 16:30 33 Days holiday inclusive of public holidays Pension Bennett & Game Recruitment are acting as a Recruitment Agency in relation to this vacancy. Bennett and Game Recruitment are a multi-disciplined technical recruitment agency based in Chichester, West Sussex operating across the UK with specialist teams covering a range of industries.We are acting as a Recruitment Agency in relation to this vacancy, and in accordance with GDPR by applying you are granting us consent to process your data, contact you about the services we offer, and submit your CV for the role you have applied for.
May 01, 2026
Full time
Position: Diesel EngineerLocation: Dalcross, InvernessSalary: £34,000 My client is a leading supplier and maintainer of Pumping and Power Generation equipment across England. They are looking to bring on board a Regional Service Engineer to look after their Power Generation sets across the North of Scotland. The ideal candidate will have hands on Generator Experience, will have experience across fault finding, diagnosis, maintenance and repair of Pumping or Power systems and will be based locally to Inverness. You will need a full Driving licence for this position. Service Engineer Position Overview To service equipment on customer sites and to respond to call-outs when needed To work closely with the Hire Controller, Driver and Fitters to ensure all hires proceed smoothly To work on the repair and maintenance of Generators To service, repair and overhaul equipment and associated components both within the depot, at customer premises and third-party sites To assist with the loading and unloading of pumps and generators onto the lorry for deliveries through the use of Hi-Ab Lorry Mounted Crane and Forklift Truck Travelling throughout the North of Scotland as required Service Engineer Position Requirements Previous experience in a Service Engineer position essential with the ability to work autonomously Strong working knowledge of Diesel Engines and Pumps First-hand experience with Fault Finding, Diagnosis, Maintenance and Repair ECS Card / CSCS Card desirable Full Driving licence Based within a commutable distance of Inverness Service Engineer Position Remuneration Salary £34,000 per annum Company Van, Fuel card, Specialist Tools provided 40 hours a week Monday - Friday 8:00 - 16:30 33 Days holiday inclusive of public holidays Pension Bennett & Game Recruitment are acting as a Recruitment Agency in relation to this vacancy. Bennett and Game Recruitment are a multi-disciplined technical recruitment agency based in Chichester, West Sussex operating across the UK with specialist teams covering a range of industries.We are acting as a Recruitment Agency in relation to this vacancy, and in accordance with GDPR by applying you are granting us consent to process your data, contact you about the services we offer, and submit your CV for the role you have applied for.
About the Role We are looking for a skilled and motivated Agricultural Fitter with strong expertise in hydraulic and electronic systems to join a well-established agricultural dealership or contracting operation. The successful candidate will be responsible for the maintenance, diagnostics, and repair of modern agricultural machinery, with a particular focus on hydraulic circuits, electronic control systems, GPS/auto-steer technology, and precision farming equipment. Key Responsibilities • Carry out diagnostics, servicing, and repair of hydraulic systems including pumps, rams, valves, hoses, and hydraulic motors on a wide range of agricultural machinery • Diagnose and repair electronic and electrical faults on tractors, combines, sprayers, drills, and ancillary equipment using manufacturer diagnostic software • Install, calibrate, and maintain GPS guidance systems, auto-steer, variable rate controllers, and ISOBUS-compatible implements • Perform routine servicing, pre-season inspections, and PDIs (pre-delivery inspections) on new and used machinery • Carry out both workshop-based and on-farm repairs, providing a responsive and professional field service when required • Read and interpret hydraulic schematics, wiring diagrams, and technical service bulletins • Maintain accurate service records and job cards, ensuring parts are ordered efficiently • Liaise with customers in a professional and courteous manner, providing clear communication on repair progress and timescales • Support the wider workshop team during peak periods such as harvest and drilling seasons • Stay up to date with new machinery technology, attending manufacturer training courses as required Skills & Requirements • Proven experience as an agricultural or plant fitter, ideally with a focus on hydraulic and electronic systems • City & Guilds / NVQ Level 3 in Land-Based Engineering or equivalent qualification • Strong working knowledge of hydraulic circuits and electronic control units (ECUs) • Experience using manufacturer diagnostic tools (e.g., John Deere Service Advisor, AGCO EDT, CNH EST, CLAAS CDS)• Ability to read and interpret technical drawings, hydraulic schematics, and wiring diagrams • Full UK driving licence (essential) • Excellent problem-solving skills and a methodical approach to fault-finding • Ability to work independently and as part of a team in a fast-paced environment • Willingness to undertake on-farm callouts, including occasional weekend and evening work during peak seasons Desirable • Manufacturer-specific training certifications (e.g., John Deere, Case IH, New Holland, Fendt, CLAAS) • Experience with precision agriculture technology and telematics systems • Welding and fabrication skills (MIG/TIG) • Forklift or telehandler licence What's on Offer • Competitive salary dependent on experience • Company vehicle or van (for field service roles) • Manufacturer training and ongoing professional development • Pension scheme and holiday entitlement • Supportive team environment with genuine career progression opportunities How to Apply For a confidential discussion or to apply, please contact Sam at (url removed). We truly value each and every candidate and are committed to finding the right opportunity for you.
May 01, 2026
Full time
About the Role We are looking for a skilled and motivated Agricultural Fitter with strong expertise in hydraulic and electronic systems to join a well-established agricultural dealership or contracting operation. The successful candidate will be responsible for the maintenance, diagnostics, and repair of modern agricultural machinery, with a particular focus on hydraulic circuits, electronic control systems, GPS/auto-steer technology, and precision farming equipment. Key Responsibilities • Carry out diagnostics, servicing, and repair of hydraulic systems including pumps, rams, valves, hoses, and hydraulic motors on a wide range of agricultural machinery • Diagnose and repair electronic and electrical faults on tractors, combines, sprayers, drills, and ancillary equipment using manufacturer diagnostic software • Install, calibrate, and maintain GPS guidance systems, auto-steer, variable rate controllers, and ISOBUS-compatible implements • Perform routine servicing, pre-season inspections, and PDIs (pre-delivery inspections) on new and used machinery • Carry out both workshop-based and on-farm repairs, providing a responsive and professional field service when required • Read and interpret hydraulic schematics, wiring diagrams, and technical service bulletins • Maintain accurate service records and job cards, ensuring parts are ordered efficiently • Liaise with customers in a professional and courteous manner, providing clear communication on repair progress and timescales • Support the wider workshop team during peak periods such as harvest and drilling seasons • Stay up to date with new machinery technology, attending manufacturer training courses as required Skills & Requirements • Proven experience as an agricultural or plant fitter, ideally with a focus on hydraulic and electronic systems • City & Guilds / NVQ Level 3 in Land-Based Engineering or equivalent qualification • Strong working knowledge of hydraulic circuits and electronic control units (ECUs) • Experience using manufacturer diagnostic tools (e.g., John Deere Service Advisor, AGCO EDT, CNH EST, CLAAS CDS)• Ability to read and interpret technical drawings, hydraulic schematics, and wiring diagrams • Full UK driving licence (essential) • Excellent problem-solving skills and a methodical approach to fault-finding • Ability to work independently and as part of a team in a fast-paced environment • Willingness to undertake on-farm callouts, including occasional weekend and evening work during peak seasons Desirable • Manufacturer-specific training certifications (e.g., John Deere, Case IH, New Holland, Fendt, CLAAS) • Experience with precision agriculture technology and telematics systems • Welding and fabrication skills (MIG/TIG) • Forklift or telehandler licence What's on Offer • Competitive salary dependent on experience • Company vehicle or van (for field service roles) • Manufacturer training and ongoing professional development • Pension scheme and holiday entitlement • Supportive team environment with genuine career progression opportunities How to Apply For a confidential discussion or to apply, please contact Sam at (url removed). We truly value each and every candidate and are committed to finding the right opportunity for you.
We are recruiting for a Permanent Multi Trade Plumber for the local Council in Bournemouth, Dorset We're looking for passionate people who have worked on the installation of adapted living aids, preferred, but not essential the installation of level access shower rooms, these may include the digging and screeding of concrete floors. You will have a proven track record as a multi trade person, will have a strong background in the installation of bathrooms, which will include tiling, boxing and the installation of sanitary wear. You will have yourown tools required to undertake domestic plumbing, showers, waste pumps, radiator moves as well as basiccarpentry to create boxing, occasional studwork, installing tuff form trays and some minor dot and dab plastering and bonding walls. Be qualified, level two or greater in plumbing and heating or equivalent, be qualified or have a great understand of WRAS Water Supply Regs or proven time served in a multi trade role. Salary: £41,300 (PAYE) depending on experience Hours: 9am - 5pm Monday to Friday (39 hours per week) Essential Skills: Level Access Shower Room Installation : Proficient in installing level access shower rooms, including both preformed trays and the excavation and screeding of floors to create a graded shower area. Tiling : Tiling bathrooms with non-large format tiles, ensuring high-quality finishes. Plumbing and Heating : Must be Level 2 qualified or have proven time-served experience. If time-served, candidates will be required to provide references prior to the interview. General Building Works : Knowledgeable in general building tasks such as door widening and stud work. Bathroom Boxing and Fittings : Experienced in creating boxing within bathrooms and fitting handrails and wash dry toilets, such as Closomat. We also install a large amount of waste pumps, such as whale, they much have a degree of experience in the installation of these. Duties and Requirements: Have a validand current driving licence as Van is provided. You arehardworking,enthusiastic,and willing tolearn,with good people skills. You are able to work on your own initiative. Experience of working on Disability Adaptations is essential. You will work from an I-Pad and all workswillbe populated from our call centre and scheduled by your planner. The I-Pads are also used for many other applications, formsand inspection certification along with regular email communication. All uniform and PPE will be provided. You don't have any unspent criminal convictions. This position is subject to a Basic DBS check
Apr 30, 2026
Full time
We are recruiting for a Permanent Multi Trade Plumber for the local Council in Bournemouth, Dorset We're looking for passionate people who have worked on the installation of adapted living aids, preferred, but not essential the installation of level access shower rooms, these may include the digging and screeding of concrete floors. You will have a proven track record as a multi trade person, will have a strong background in the installation of bathrooms, which will include tiling, boxing and the installation of sanitary wear. You will have yourown tools required to undertake domestic plumbing, showers, waste pumps, radiator moves as well as basiccarpentry to create boxing, occasional studwork, installing tuff form trays and some minor dot and dab plastering and bonding walls. Be qualified, level two or greater in plumbing and heating or equivalent, be qualified or have a great understand of WRAS Water Supply Regs or proven time served in a multi trade role. Salary: £41,300 (PAYE) depending on experience Hours: 9am - 5pm Monday to Friday (39 hours per week) Essential Skills: Level Access Shower Room Installation : Proficient in installing level access shower rooms, including both preformed trays and the excavation and screeding of floors to create a graded shower area. Tiling : Tiling bathrooms with non-large format tiles, ensuring high-quality finishes. Plumbing and Heating : Must be Level 2 qualified or have proven time-served experience. If time-served, candidates will be required to provide references prior to the interview. General Building Works : Knowledgeable in general building tasks such as door widening and stud work. Bathroom Boxing and Fittings : Experienced in creating boxing within bathrooms and fitting handrails and wash dry toilets, such as Closomat. We also install a large amount of waste pumps, such as whale, they much have a degree of experience in the installation of these. Duties and Requirements: Have a validand current driving licence as Van is provided. You arehardworking,enthusiastic,and willing tolearn,with good people skills. You are able to work on your own initiative. Experience of working on Disability Adaptations is essential. You will work from an I-Pad and all workswillbe populated from our call centre and scheduled by your planner. The I-Pads are also used for many other applications, formsand inspection certification along with regular email communication. All uniform and PPE will be provided. You don't have any unspent criminal convictions. This position is subject to a Basic DBS check
TXM Recruit are recruiting a permanent Rail Support Technician (Electrical biased) based in Derby. Location: Derby Shifts: Monday - Thursday 08.00 5pm/ Friday 08.00am 2.30pm Salary: £30,000k - £32,000k We are looking for individuals from a rail or rolling stock background predominantly however individuals from the following Industries considered: Rolling Stock / RAIL/ Royal Navy / RAF / REME / British Army/ General Engineering/Aerospace/Automotive who have experience within the field of electrical engineering and overhaul experience. Primary Purpose of the Role: To carry out Overhauls and repairs in a workshop environment on various rail projects including: Traction motors Fans & heaters Water cooler pumps This will include the following: Isolate power sources and lockout/tagout all electrical systems Gather tools, cleaning agents, PPE, and documentation (electrical schematics, manuals) Set up a clean work bench, organized workspace for disassembly Disassembly Carefully dismantle all components in a logical sequence Store fasteners and small parts in clearly marked containers Inspection & Assessment Check all mechanical components for wear, corrosion, cracks, or deformation Inspect all electrical wiring, electrical connectors, and insulation for damage Identify any parts that need repair or replacement Clean components using appropriate chemicals (degreasers, contact cleaners, etc.) Remove dirt, corrosion, and old lubricants Ensure components are fully dry before moving on Electrical Testing Use a multimeter to test continuity, resistance, and voltage where applicable Verify integrity of electrical circuits, switches, and connections Flag any faulty components for replacement Repair or Replace damaged or worn parts Recondition components where possible (e.g. re-lubrication, minor fixes) Reassembly Reassemble in reverse order of disassembly Follow torque specs and alignment guidelines Reconnect all electrical systems carefully 8. Final Testing & Commissioning Perform functional testing of the full system Check for proper operation under normal conditions Verify safety systems and fail-safes Document results and sign off Ensuring that high levels of productivity, attendance and customer satisfaction are maintained at all times. Key Duties and Responsibilities: Your duties and responsibilities will include but are not limited to the following: Carry out routine maintenance and repairs on various mechanical equipment. Stripping and rewiring electrical components as well as electrical testing. Electrical knowledge, fault finding and exchanging electrical components Using in house reporting ensure all work is quoted and completed on time. Pressure washing and cleaning of components using various chemicals Read and interpret technical manuals and schematics. Complete maintenance records and documentation accurately. Electrical fault finding Ensure your workspace in clean and organised at all times. Ensure all Health and Safety procedures and adhered to at all times. Work as part of a team to meet operational deadlines Support continuous improvement and reliability initiatives. General: To work in a manner that reflects the Company values; deliver results, customer focus, insist on highest standards, ownership and accountability teamwork. Providing high standards of quality whilst promoting, building and maintaining effective working relationships with colleagues, suppliers and customers. Identifying training needs relevant to the job and participating in any training and development as required. Maintaining high levels of personal motivation, attendance and conduct. Person Specification: Essential: Experience of working within a similar role. Effective and professional communication skills - verbal and written. Detailed oriented and ability to multitask. Able to work individually or as part of a team. Logical troubleshooting skills. Desirable: Previous experience in the rolling stock/rail industry would be advantageous. Electrical knowledge, fault finding and exchanging electrical components Able to read mechanical engineering drawings. Full UK clean driving licence. Fork Lift Truck license. Overhead Crane License.
Apr 30, 2026
Contractor
TXM Recruit are recruiting a permanent Rail Support Technician (Electrical biased) based in Derby. Location: Derby Shifts: Monday - Thursday 08.00 5pm/ Friday 08.00am 2.30pm Salary: £30,000k - £32,000k We are looking for individuals from a rail or rolling stock background predominantly however individuals from the following Industries considered: Rolling Stock / RAIL/ Royal Navy / RAF / REME / British Army/ General Engineering/Aerospace/Automotive who have experience within the field of electrical engineering and overhaul experience. Primary Purpose of the Role: To carry out Overhauls and repairs in a workshop environment on various rail projects including: Traction motors Fans & heaters Water cooler pumps This will include the following: Isolate power sources and lockout/tagout all electrical systems Gather tools, cleaning agents, PPE, and documentation (electrical schematics, manuals) Set up a clean work bench, organized workspace for disassembly Disassembly Carefully dismantle all components in a logical sequence Store fasteners and small parts in clearly marked containers Inspection & Assessment Check all mechanical components for wear, corrosion, cracks, or deformation Inspect all electrical wiring, electrical connectors, and insulation for damage Identify any parts that need repair or replacement Clean components using appropriate chemicals (degreasers, contact cleaners, etc.) Remove dirt, corrosion, and old lubricants Ensure components are fully dry before moving on Electrical Testing Use a multimeter to test continuity, resistance, and voltage where applicable Verify integrity of electrical circuits, switches, and connections Flag any faulty components for replacement Repair or Replace damaged or worn parts Recondition components where possible (e.g. re-lubrication, minor fixes) Reassembly Reassemble in reverse order of disassembly Follow torque specs and alignment guidelines Reconnect all electrical systems carefully 8. Final Testing & Commissioning Perform functional testing of the full system Check for proper operation under normal conditions Verify safety systems and fail-safes Document results and sign off Ensuring that high levels of productivity, attendance and customer satisfaction are maintained at all times. Key Duties and Responsibilities: Your duties and responsibilities will include but are not limited to the following: Carry out routine maintenance and repairs on various mechanical equipment. Stripping and rewiring electrical components as well as electrical testing. Electrical knowledge, fault finding and exchanging electrical components Using in house reporting ensure all work is quoted and completed on time. Pressure washing and cleaning of components using various chemicals Read and interpret technical manuals and schematics. Complete maintenance records and documentation accurately. Electrical fault finding Ensure your workspace in clean and organised at all times. Ensure all Health and Safety procedures and adhered to at all times. Work as part of a team to meet operational deadlines Support continuous improvement and reliability initiatives. General: To work in a manner that reflects the Company values; deliver results, customer focus, insist on highest standards, ownership and accountability teamwork. Providing high standards of quality whilst promoting, building and maintaining effective working relationships with colleagues, suppliers and customers. Identifying training needs relevant to the job and participating in any training and development as required. Maintaining high levels of personal motivation, attendance and conduct. Person Specification: Essential: Experience of working within a similar role. Effective and professional communication skills - verbal and written. Detailed oriented and ability to multitask. Able to work individually or as part of a team. Logical troubleshooting skills. Desirable: Previous experience in the rolling stock/rail industry would be advantageous. Electrical knowledge, fault finding and exchanging electrical components Able to read mechanical engineering drawings. Full UK clean driving licence. Fork Lift Truck license. Overhead Crane License.
Are you a hands-on Mechanical Fitter with a strong mechanical background? Do you enjoy building and assembling complex equipment from engineering drawings using a variety of tools? If so, we want to hear from you. Impact Recruitment are currently working with a well-established British manufacturing business based in Wellingborough who specialise in the design and manufacture of industrial pumps, compressors, and vacuum systems. They are looking to recruit a Mechanical Fitter to join their growing workshop team due to retirement within the business. This is a fantastic opportunity for someone with a mechanical background to join a supportive engineering environment with excellent training and development opportunities. Location: Wellingborough Hours: 39hours Mon - Thurs: 06:30 - 15:00, Fri: 2pm finish Salary: 30,000 per annum (Negotiable DOE) Contract: Permanent Duties: Assemble pumps, compressors, and vacuum systems from mechanical drawings Follow engineering and some electrical drawings accurately during assembly Use a variety of hand tools for measuring, drilling, tapping, and fitting Carry out pressure testing on large and small pump systems Ensure all assemblies are completed to high quality standards Support continuous improvement and workshop efficiency initiatives Maintain a clean, organised, and safe working environment The ideal candidate must: Have a strong mechanical background, either through work experience or education Be confident using hand tools and workshop equipment Be able to read and follow engineering drawings Have good measuring and assembly skills Be eager to learn and develop within a manufacturing environment Be reliable, hands-on, and proactive in their approach Experience with pumps, vacuums, or compressors would be advantageous but not essential Benefits: Early finish every Friday Internal training and development opportunities Clean and well-equipped workshop environment On-site parking and canteen facilities Stable permanent role within a growing manufacturer If this role sounds of interest to you then please apply with an up-to-date CV. Impact Recruitment is an employment agency working on behalf of our client.
Apr 30, 2026
Full time
Are you a hands-on Mechanical Fitter with a strong mechanical background? Do you enjoy building and assembling complex equipment from engineering drawings using a variety of tools? If so, we want to hear from you. Impact Recruitment are currently working with a well-established British manufacturing business based in Wellingborough who specialise in the design and manufacture of industrial pumps, compressors, and vacuum systems. They are looking to recruit a Mechanical Fitter to join their growing workshop team due to retirement within the business. This is a fantastic opportunity for someone with a mechanical background to join a supportive engineering environment with excellent training and development opportunities. Location: Wellingborough Hours: 39hours Mon - Thurs: 06:30 - 15:00, Fri: 2pm finish Salary: 30,000 per annum (Negotiable DOE) Contract: Permanent Duties: Assemble pumps, compressors, and vacuum systems from mechanical drawings Follow engineering and some electrical drawings accurately during assembly Use a variety of hand tools for measuring, drilling, tapping, and fitting Carry out pressure testing on large and small pump systems Ensure all assemblies are completed to high quality standards Support continuous improvement and workshop efficiency initiatives Maintain a clean, organised, and safe working environment The ideal candidate must: Have a strong mechanical background, either through work experience or education Be confident using hand tools and workshop equipment Be able to read and follow engineering drawings Have good measuring and assembly skills Be eager to learn and develop within a manufacturing environment Be reliable, hands-on, and proactive in their approach Experience with pumps, vacuums, or compressors would be advantageous but not essential Benefits: Early finish every Friday Internal training and development opportunities Clean and well-equipped workshop environment On-site parking and canteen facilities Stable permanent role within a growing manufacturer If this role sounds of interest to you then please apply with an up-to-date CV. Impact Recruitment is an employment agency working on behalf of our client.
£44,000 starting, Overtime paid at 150%, Door to Door payments, Company van and fuel card, Company pension plan, Phone and laptop, Travel benefits Wellness programme, Ongoing training and development The Mobile HGV Technician Role We are seeking a qualified and experienced Mobile HGV Technician to join a world-renowned, multinational company supporting the service, repair and maintenance of specialist HGVs. This role will be covering the Warrington area and is working with an International Vehicle Manufacturer providing service and repair support for their vehicles in transport depots, airports, MOD Sites etc. If you have experience as a Heavy Goods Engineer, PSV Technician/Bus Mechanic, or Heavy Plant Fitter, we would be very keen to speak with you. Key Responsibilities of the HGV Technician Carry out diagnostic analysis, repairs and preventative maintenance. Deliver customer-facing product support with a professional approach. Complete PDI inspections to ensure vehicles meet required standards. Repair equipment and vehicles either in the depot or on-site, following manufacturer specifications and company policies. Complete all required paperwork accurately - including engineer reports, inspections, calibration checks and job sheets. Perform mechanical maintenance, testing and repairs on hydraulic and pneumatic systems, pumps, compressors, motors and ancillary equipment. Experience & Requirements for our HGV Technician Proven background in auto-electrical fault diagnosis and repair, including use of diagnostic tools. Direct HGV Technician experience. Hands on experience working with HGVs and specialist vehicles. Competent with mechanical, hydraulic, pneumatic and electrical systems. Full UK Driving Licence. City & Guilds Level 3 in Vehicle Mechanical & Electronic Systems (or equivalent) is advantageous.
Apr 30, 2026
Full time
£44,000 starting, Overtime paid at 150%, Door to Door payments, Company van and fuel card, Company pension plan, Phone and laptop, Travel benefits Wellness programme, Ongoing training and development The Mobile HGV Technician Role We are seeking a qualified and experienced Mobile HGV Technician to join a world-renowned, multinational company supporting the service, repair and maintenance of specialist HGVs. This role will be covering the Warrington area and is working with an International Vehicle Manufacturer providing service and repair support for their vehicles in transport depots, airports, MOD Sites etc. If you have experience as a Heavy Goods Engineer, PSV Technician/Bus Mechanic, or Heavy Plant Fitter, we would be very keen to speak with you. Key Responsibilities of the HGV Technician Carry out diagnostic analysis, repairs and preventative maintenance. Deliver customer-facing product support with a professional approach. Complete PDI inspections to ensure vehicles meet required standards. Repair equipment and vehicles either in the depot or on-site, following manufacturer specifications and company policies. Complete all required paperwork accurately - including engineer reports, inspections, calibration checks and job sheets. Perform mechanical maintenance, testing and repairs on hydraulic and pneumatic systems, pumps, compressors, motors and ancillary equipment. Experience & Requirements for our HGV Technician Proven background in auto-electrical fault diagnosis and repair, including use of diagnostic tools. Direct HGV Technician experience. Hands on experience working with HGVs and specialist vehicles. Competent with mechanical, hydraulic, pneumatic and electrical systems. Full UK Driving Licence. City & Guilds Level 3 in Vehicle Mechanical & Electronic Systems (or equivalent) is advantageous.
Job Description NOV's Industrial Pumps and Mixer business is seeking a Skilled Mechanical Fitter to join our team in Manchester. In this role you will work as part of an assembly team responsible for the assembly and testing of NOV products. You will take a customer service approach, both internal and external, with a view that the technical services you provide are there to support the efficient management of your workspace and assembled products. You will be responsible for your own productivity output, utilising various manufacturing processes and disciplines. As a Skilled Fitter you will be keen to take on challenges, develop your technical skills potential as well as expand your knowledge and experience through a variety of exciting initiatives. DUTIES & RESPONSIBILITIES: • Assemble Pump & Mixer equipment whilst working to company procedures • Fitting of components and/or modules as directed by engineering drawings and technical specifications • Work closely with colleagues during build/install to ensure a smooth and efficient build process • Ability to conduct production tests to established procedures, and complete accurate test reports • Ensure all components which are being assembled are fit for purpose • Operate machines or use hand tools and power tools to secure parts in place. • To operate equipment in a safe manner, producing products which conforms to quality specifications • Recording work carried out for tracking purposes • Providing cover for any other positions within the department • Working to and maintaining good housekeeping standards • Comply with all NOV Company, Quality + HSE policies and procedures • Travel as and when required • Perform any other work-related tasks and duties in accordance with the business needs QUALIFICATIONS & EXPERIENCE: • Time-served apprenticeship within a Mechanical Engineering discipline, equivalent to either City and Guilds Level 3, or NVQ Level 3 (Essential) • HNC / HND qualified or equivalent, with a Mechanical Engineering bias • Experience of PC pumps and waste water products, preferably within a service background • Mechanical Seal knowledge • Computer literacy (including good command of Microsoft Office Excel, Word and Outlook) • Manual handing training / Slinging & Lifting Training • HSE awareness • Basic Electrical experience (Desirable) • Motor Wiring certified (Desirable) About Us Every day, the oil and gas industry's best minds put more than 150 years of experience to work to help our customers achieve lasting success. We Power the Industry that Powers the World Throughout every region in the world and across every area of drilling and production, our family of companies has provided the technical expertise, advanced equipment, and operational support necessary for success-now and in the future. Global Family We are a global family of thousands of individuals, working as one team to create a lasting impact for ourselves, our customers, and the communities where we live and work. Purposeful Innovation Through purposeful business innovation, product creation, and service delivery, we are driven to power the industry that powers the world better. Service Above All This drives us to anticipate our customers' needs and work with them to deliver the finest products and services on time and on budget. About the Team Corporate Our family of companies is supported by our global Corporate teams, providing expert knowledge from functions including Human Resources, Information Technology, Compliance, Finance, QHSE, Marketing and Legal centers of expertise. We are structured to provide guidance and service above all to all our business operations.
Apr 29, 2026
Full time
Job Description NOV's Industrial Pumps and Mixer business is seeking a Skilled Mechanical Fitter to join our team in Manchester. In this role you will work as part of an assembly team responsible for the assembly and testing of NOV products. You will take a customer service approach, both internal and external, with a view that the technical services you provide are there to support the efficient management of your workspace and assembled products. You will be responsible for your own productivity output, utilising various manufacturing processes and disciplines. As a Skilled Fitter you will be keen to take on challenges, develop your technical skills potential as well as expand your knowledge and experience through a variety of exciting initiatives. DUTIES & RESPONSIBILITIES: • Assemble Pump & Mixer equipment whilst working to company procedures • Fitting of components and/or modules as directed by engineering drawings and technical specifications • Work closely with colleagues during build/install to ensure a smooth and efficient build process • Ability to conduct production tests to established procedures, and complete accurate test reports • Ensure all components which are being assembled are fit for purpose • Operate machines or use hand tools and power tools to secure parts in place. • To operate equipment in a safe manner, producing products which conforms to quality specifications • Recording work carried out for tracking purposes • Providing cover for any other positions within the department • Working to and maintaining good housekeeping standards • Comply with all NOV Company, Quality + HSE policies and procedures • Travel as and when required • Perform any other work-related tasks and duties in accordance with the business needs QUALIFICATIONS & EXPERIENCE: • Time-served apprenticeship within a Mechanical Engineering discipline, equivalent to either City and Guilds Level 3, or NVQ Level 3 (Essential) • HNC / HND qualified or equivalent, with a Mechanical Engineering bias • Experience of PC pumps and waste water products, preferably within a service background • Mechanical Seal knowledge • Computer literacy (including good command of Microsoft Office Excel, Word and Outlook) • Manual handing training / Slinging & Lifting Training • HSE awareness • Basic Electrical experience (Desirable) • Motor Wiring certified (Desirable) About Us Every day, the oil and gas industry's best minds put more than 150 years of experience to work to help our customers achieve lasting success. We Power the Industry that Powers the World Throughout every region in the world and across every area of drilling and production, our family of companies has provided the technical expertise, advanced equipment, and operational support necessary for success-now and in the future. Global Family We are a global family of thousands of individuals, working as one team to create a lasting impact for ourselves, our customers, and the communities where we live and work. Purposeful Innovation Through purposeful business innovation, product creation, and service delivery, we are driven to power the industry that powers the world better. Service Above All This drives us to anticipate our customers' needs and work with them to deliver the finest products and services on time and on budget. About the Team Corporate Our family of companies is supported by our global Corporate teams, providing expert knowledge from functions including Human Resources, Information Technology, Compliance, Finance, QHSE, Marketing and Legal centers of expertise. We are structured to provide guidance and service above all to all our business operations.
Mechanical Fitter (Workshop-Based) Location: Dalry, Ayrshire Duration: Until end of the year (approx. 9 months) Start Date: Immediate Work Environment: Workshop-based, onsite Working Hours: 38 hours per week Mon-Thu: 07:45 - 16:00 Fri: 07:45 - 14:30 Overtime: Available midweek on an adhoc basis and shutdowns Shutdowns: Up to 12 per year One major shutdown every six weeks (10-12 hour shifts) Additional planned shutdowns as required 38-hour working week with potential overtime subject to site needs. About the Role We are recruiting three Mechanical Fitters to support with workshop-based overhaul and repair activities. These roles are critical in ensuring the ongoing reliability of mechanical and rotating equipment across the site. Candidates will work as part of a high-performing maintenance team with a strong focus on equipment integrity, precision, and safe working practices. Key Responsibilities Workshop-Based Overhaul & Repairs Complete strip-down, inspection, overhaul, repair, and reassembly of mechanical equipment. Conduct workshop-based servicing across a range of rotating machinery. Perform detailed mechanical fault-finding and corrective maintenance. Rotating Equipment Work with pumps, gearboxes, motors, and associated rotating assets. Carry out component replacement, bearing changes, alignment tasks, and functional testing. Maintenance & Plant Support Support maintenance activities to ensure equipment reliability and availability. Interpret mechanical drawings, engineering schematics, and work instructions. Adhere to all site safety standards, procedures, and permit-to-work systems. Essential Requirements Proven experience as a Mechanical Fitter within industrial, manufacturing, or process environments. Strong knowledge of rotating equipment and workshop repair procedures. Demonstrable mechanical fault-finding and equipment overhaul skills. Ability to work onsite within an active plant environment. Preferred Experience & Qualifications Previous work in a plant environment , ideally within pharmaceuticals, chemicals, or similar regulated industries. Holding one or more industry safety cards (e.g., IC, CCNSG, or equivalent). Note: Exact card requirements are being confirmed with the client. Personal Attributes Methodical, safety-focused approach to all tasks. Strong practical engineering skills and attention to detail. Reliable, self-motivated, and able to work effectively within a workshop team. Additional Information Roles are workshop-based and not field installation roles. Umbrella Rates £48ph - Upto 38 hours Monday-Friday £67.20ph - Over 38 hours Monday-Friday and first 4 hours Saturday £96.40ph - Over 4 hours Saturday and all hours Sunday For more information, click apply
Apr 28, 2026
Contractor
Mechanical Fitter (Workshop-Based) Location: Dalry, Ayrshire Duration: Until end of the year (approx. 9 months) Start Date: Immediate Work Environment: Workshop-based, onsite Working Hours: 38 hours per week Mon-Thu: 07:45 - 16:00 Fri: 07:45 - 14:30 Overtime: Available midweek on an adhoc basis and shutdowns Shutdowns: Up to 12 per year One major shutdown every six weeks (10-12 hour shifts) Additional planned shutdowns as required 38-hour working week with potential overtime subject to site needs. About the Role We are recruiting three Mechanical Fitters to support with workshop-based overhaul and repair activities. These roles are critical in ensuring the ongoing reliability of mechanical and rotating equipment across the site. Candidates will work as part of a high-performing maintenance team with a strong focus on equipment integrity, precision, and safe working practices. Key Responsibilities Workshop-Based Overhaul & Repairs Complete strip-down, inspection, overhaul, repair, and reassembly of mechanical equipment. Conduct workshop-based servicing across a range of rotating machinery. Perform detailed mechanical fault-finding and corrective maintenance. Rotating Equipment Work with pumps, gearboxes, motors, and associated rotating assets. Carry out component replacement, bearing changes, alignment tasks, and functional testing. Maintenance & Plant Support Support maintenance activities to ensure equipment reliability and availability. Interpret mechanical drawings, engineering schematics, and work instructions. Adhere to all site safety standards, procedures, and permit-to-work systems. Essential Requirements Proven experience as a Mechanical Fitter within industrial, manufacturing, or process environments. Strong knowledge of rotating equipment and workshop repair procedures. Demonstrable mechanical fault-finding and equipment overhaul skills. Ability to work onsite within an active plant environment. Preferred Experience & Qualifications Previous work in a plant environment , ideally within pharmaceuticals, chemicals, or similar regulated industries. Holding one or more industry safety cards (e.g., IC, CCNSG, or equivalent). Note: Exact card requirements are being confirmed with the client. Personal Attributes Methodical, safety-focused approach to all tasks. Strong practical engineering skills and attention to detail. Reliable, self-motivated, and able to work effectively within a workshop team. Additional Information Roles are workshop-based and not field installation roles. Umbrella Rates £48ph - Upto 38 hours Monday-Friday £67.20ph - Over 38 hours Monday-Friday and first 4 hours Saturday £96.40ph - Over 4 hours Saturday and all hours Sunday For more information, click apply
We're looking for an experienced Mechanical Fitter to join a prominent Manufacturing company located in Selby. This role offers an hourly rate of up to 18.81PH with a day shift schedule from Monday to Friday, 7am to 4pm. In addition to competitive pay, you'll receive a comprehensive benefits package, including a 10% pension contribution, life assurance, private medical insurance, and 25 days annual leave which increases with tenure plus BH. As a Mechanical Fitter you will be responsible for equipment maintenance, repair, and troubleshooting. Experience in a manufacturing settings is essential, along with familiarity with pumps, valves, compressors, and related machinery. Responsibilities of the Mechanical Fitter:- Perform routine/preventative and reactive maintenance on all mechanical components of the plant safely and efficiently. Respond promptly to plant breakdowns as needed. Conduct regular inspections and maintenance in line with the plant's preventative maintenance system. Ensure all work meets high-quality standards. Adhere to all health and safety procedures, including permit-to-work protocols. Assist in preparing and implementing RAMS required for each task. Follow health and safety requirements outlined in training, policies, procedures, risk assessments, method statements, and safe systems of work. Report any health and safety issues, accidents, or near misses to the line manager. Participate in necessary training to maintain personal qualifications and competence. Please apply directly for further information regarding this Mechanical Fitter position.
Oct 08, 2025
Full time
We're looking for an experienced Mechanical Fitter to join a prominent Manufacturing company located in Selby. This role offers an hourly rate of up to 18.81PH with a day shift schedule from Monday to Friday, 7am to 4pm. In addition to competitive pay, you'll receive a comprehensive benefits package, including a 10% pension contribution, life assurance, private medical insurance, and 25 days annual leave which increases with tenure plus BH. As a Mechanical Fitter you will be responsible for equipment maintenance, repair, and troubleshooting. Experience in a manufacturing settings is essential, along with familiarity with pumps, valves, compressors, and related machinery. Responsibilities of the Mechanical Fitter:- Perform routine/preventative and reactive maintenance on all mechanical components of the plant safely and efficiently. Respond promptly to plant breakdowns as needed. Conduct regular inspections and maintenance in line with the plant's preventative maintenance system. Ensure all work meets high-quality standards. Adhere to all health and safety procedures, including permit-to-work protocols. Assist in preparing and implementing RAMS required for each task. Follow health and safety requirements outlined in training, policies, procedures, risk assessments, method statements, and safe systems of work. Report any health and safety issues, accidents, or near misses to the line manager. Participate in necessary training to maintain personal qualifications and competence. Please apply directly for further information regarding this Mechanical Fitter position.
Pump Engineer/ Fitter North East Leicester Day shift Mon-Fri Permanent Role Up to £40k DOE Competitive Overtime Rates Our client is a well-established engineering business specialising in the repair and refurbishment of motors, pumps, and industrial equipment for clients across sectors including power generation, manufacturing, water and various commercial/industrial businesses. They are known for their high-quality repair work and technical expertise. This is a hands-on workshop-based role in North East Leicester, ideal for someone with pump repair, maintenance / mechanical experience. Other titles could include: Pump Engineer, Pump Fitter, Mechanical Fitter, Electro-Mechanical Fitter, Service Engineer, Workshop Engineer, Workshop Fitter, Gearbox Fitter, Repair Technician, Mechanical Technician, Industrial Fitter, Pump Technician or similar. Key Responsibilities - Pump Engineer / Fitter: Strip down, assess, and rebuild pumps, gearboxes. Diagnose faults and complete all work to high standards of quality and safety. Maintain accurate documentation and test records. Work collaboratively within a small, skilled workshop team. Experience & Skills Required - Pump Engineer / Fitter: Proven experience as a Pump Fitter/Engineer Hands-on experience stripping down and repairing pumps, gearboxes and fans (ESSENTIAL) Commutable to the Thurmaston area daily with a driving licence. Competent with both mechanical and electrical aspects of repair work. A flexible, cooperative attitude and commitment to quality workmanship. Package - Pump Engineer / Fitter: Salary up to £40,000 DOE Day Shifts 8:00am 4:30pm, Monday to Friday Competitive Overtime rates Company Pension Scheme Company Holidays Company courses to upskill. Long-term stability within a reputable, growing company Interested? To apply for this Pump Engineer/Fitter position, here are your two options: "This is the job for me! When can I start?" - Call now and let s talk through your experience. Ask for Emma Gilmore on (phone number removed) between 7.30am - 4.30pm. "I think I'm right for this position, but I'm not sure I have enough to get an interview" - Click "apply now" so I can read your CV and let you know - (url removed) PPDEL
Oct 07, 2025
Full time
Pump Engineer/ Fitter North East Leicester Day shift Mon-Fri Permanent Role Up to £40k DOE Competitive Overtime Rates Our client is a well-established engineering business specialising in the repair and refurbishment of motors, pumps, and industrial equipment for clients across sectors including power generation, manufacturing, water and various commercial/industrial businesses. They are known for their high-quality repair work and technical expertise. This is a hands-on workshop-based role in North East Leicester, ideal for someone with pump repair, maintenance / mechanical experience. Other titles could include: Pump Engineer, Pump Fitter, Mechanical Fitter, Electro-Mechanical Fitter, Service Engineer, Workshop Engineer, Workshop Fitter, Gearbox Fitter, Repair Technician, Mechanical Technician, Industrial Fitter, Pump Technician or similar. Key Responsibilities - Pump Engineer / Fitter: Strip down, assess, and rebuild pumps, gearboxes. Diagnose faults and complete all work to high standards of quality and safety. Maintain accurate documentation and test records. Work collaboratively within a small, skilled workshop team. Experience & Skills Required - Pump Engineer / Fitter: Proven experience as a Pump Fitter/Engineer Hands-on experience stripping down and repairing pumps, gearboxes and fans (ESSENTIAL) Commutable to the Thurmaston area daily with a driving licence. Competent with both mechanical and electrical aspects of repair work. A flexible, cooperative attitude and commitment to quality workmanship. Package - Pump Engineer / Fitter: Salary up to £40,000 DOE Day Shifts 8:00am 4:30pm, Monday to Friday Competitive Overtime rates Company Pension Scheme Company Holidays Company courses to upskill. Long-term stability within a reputable, growing company Interested? To apply for this Pump Engineer/Fitter position, here are your two options: "This is the job for me! When can I start?" - Call now and let s talk through your experience. Ask for Emma Gilmore on (phone number removed) between 7.30am - 4.30pm. "I think I'm right for this position, but I'm not sure I have enough to get an interview" - Click "apply now" so I can read your CV and let you know - (url removed) PPDEL
Mobile Plant Fitter Birmingham 35,000 - 37,000 + Van + Overtime OTE 45k + Holiday + Pension Are you from a mechanical background with an understanding of engines, motors, pumps or similar and looking for a role where you can boost your earning potential through overtime? Do you want a role where you will be field based and working for a market leading company who pride themselves on being the go to name in their industry? Having been established for nearly 20 years this company have established themselves as the market leader within their sector and are now part of a larger national group. Operating internationally they have seen consistent expansion and are now among the world leaders. With an ever growing portfolio of clients and contracts, they have grown from strength to strength, and are continue to see ongoing year on year growth with extensive expansion plans moving forward. They are now looking for an additional Mobile Fitter to join their Midlands team. In this role you will be traveling to customer sites around the Midlands. You will undertake servicing and preventative maintenance on a range of plant equipment as well as any diagnostics and repairs that are required. The role is Monday - Friday days based but will require you to be on call 1 in 5 weeks. Given the niche nature of the equipment the company are able to provide training on the specifics of their industry for the successful candidate however a Mechanical understanding of engines, pumps, motors or similar is required Applications from vehicle mechanics, plant engineers, REME or similar backgrounds would all be considered. This is the perfect opportunity to join a market leading business who can offer fantastic earning potential through extensive overtime. The role: Field based covering the Midlands Service, Repair and Maintenance of plant equipment Call out rota 1 in 5 weeks OTE 45k with overtime The person: Mechanical background Knowledge of engines, pumps, motors or similar. Vehicle Mechanics, REME, Plant or similar backgrounds ideal Full UK driving licence Reference no: (phone number removed) To apply for this role or to be considered for further roles, please click "Apply Now" or contact Jeremy Nicholls at Rise Technical Recruitment. Rise Technical Recruitment Ltd acts an employment agency for permanent roles and an employment business for temporary roles. The salary advertised is the bracket available for this position. The actual salary paid will be dependent on your level of experience, qualifications and skill set. We are an equal opportunities employer and welcome applications from all suitable candidates.
Oct 07, 2025
Full time
Mobile Plant Fitter Birmingham 35,000 - 37,000 + Van + Overtime OTE 45k + Holiday + Pension Are you from a mechanical background with an understanding of engines, motors, pumps or similar and looking for a role where you can boost your earning potential through overtime? Do you want a role where you will be field based and working for a market leading company who pride themselves on being the go to name in their industry? Having been established for nearly 20 years this company have established themselves as the market leader within their sector and are now part of a larger national group. Operating internationally they have seen consistent expansion and are now among the world leaders. With an ever growing portfolio of clients and contracts, they have grown from strength to strength, and are continue to see ongoing year on year growth with extensive expansion plans moving forward. They are now looking for an additional Mobile Fitter to join their Midlands team. In this role you will be traveling to customer sites around the Midlands. You will undertake servicing and preventative maintenance on a range of plant equipment as well as any diagnostics and repairs that are required. The role is Monday - Friday days based but will require you to be on call 1 in 5 weeks. Given the niche nature of the equipment the company are able to provide training on the specifics of their industry for the successful candidate however a Mechanical understanding of engines, pumps, motors or similar is required Applications from vehicle mechanics, plant engineers, REME or similar backgrounds would all be considered. This is the perfect opportunity to join a market leading business who can offer fantastic earning potential through extensive overtime. The role: Field based covering the Midlands Service, Repair and Maintenance of plant equipment Call out rota 1 in 5 weeks OTE 45k with overtime The person: Mechanical background Knowledge of engines, pumps, motors or similar. Vehicle Mechanics, REME, Plant or similar backgrounds ideal Full UK driving licence Reference no: (phone number removed) To apply for this role or to be considered for further roles, please click "Apply Now" or contact Jeremy Nicholls at Rise Technical Recruitment. Rise Technical Recruitment Ltd acts an employment agency for permanent roles and an employment business for temporary roles. The salary advertised is the bracket available for this position. The actual salary paid will be dependent on your level of experience, qualifications and skill set. We are an equal opportunities employer and welcome applications from all suitable candidates.
Mechanical Fitter required for work on various sites around the Northwest. You will service various Environment agency sites across the region providing service for the upgrading of the MEICA systems. The main depot is located in Warrington , so you will be based locally ideally. This role covers the entire Northwest region, so will involve a lot of driving to various sites across the region. A vehicle with a fuel card will be provided Required Skills include working on. - Process control 4-20mA 0-10V - Control panel Fault Finding, pump starter, thermistors, magnetic, earth leakage. Relays, safety relays, Pilz relays, contactor rating AC DC. - Level sensors calibration. - Knowledge of electric actuators (settings, torque, overload etc.) - Wier tilt gates, - Pumps types, vertical drive, submersible etc. - Pump, impellor, bearing, trust bearings, seals, dry and wet types. - VSD's, Starting currents, Torque setting, Ramps. - Cable Testing (iR, R1+R, Zs etc.) - Making off and glanding, SWA's. PWA. - Cable type SWA, LSF, PVC, XLPE, H07RNF and application. - Earthing, functional earth. - Gland Ratings CW, EW etc. Desirable: - Hydraulic circuit, systems. Pump, cylinders, valve (solenoids). - Signal isolators ICA interface - Experience of Rotork actuators - PLC programming - VSD drive settings - Generators G59 deapsea etc. - Pump, impellor material selection. This role is an ongoing freelance/temporary role and is deemed inside IR35, so weekly wages are paid via the PAYE Umbrella system. For more information please contact Bruno Bagi (phone number removed) or (phone number removed)
Oct 07, 2025
Contractor
Mechanical Fitter required for work on various sites around the Northwest. You will service various Environment agency sites across the region providing service for the upgrading of the MEICA systems. The main depot is located in Warrington , so you will be based locally ideally. This role covers the entire Northwest region, so will involve a lot of driving to various sites across the region. A vehicle with a fuel card will be provided Required Skills include working on. - Process control 4-20mA 0-10V - Control panel Fault Finding, pump starter, thermistors, magnetic, earth leakage. Relays, safety relays, Pilz relays, contactor rating AC DC. - Level sensors calibration. - Knowledge of electric actuators (settings, torque, overload etc.) - Wier tilt gates, - Pumps types, vertical drive, submersible etc. - Pump, impellor, bearing, trust bearings, seals, dry and wet types. - VSD's, Starting currents, Torque setting, Ramps. - Cable Testing (iR, R1+R, Zs etc.) - Making off and glanding, SWA's. PWA. - Cable type SWA, LSF, PVC, XLPE, H07RNF and application. - Earthing, functional earth. - Gland Ratings CW, EW etc. Desirable: - Hydraulic circuit, systems. Pump, cylinders, valve (solenoids). - Signal isolators ICA interface - Experience of Rotork actuators - PLC programming - VSD drive settings - Generators G59 deapsea etc. - Pump, impellor material selection. This role is an ongoing freelance/temporary role and is deemed inside IR35, so weekly wages are paid via the PAYE Umbrella system. For more information please contact Bruno Bagi (phone number removed) or (phone number removed)
Our client, a manufacturing business in, seek to appoint a Mechanical Fitter to their Service team. This is a site-based position without travel. The appointed Mechanical Fitter will be working on a wide range of machinery, stripping and inspecting products returned to site for repair, completing brief paperwork on faults, selecting parts for rebuild, and then re-assembling and testing products ready to be shipped back to the customer. You will receive an excellent salary in a positive atmosphere working for a large manufacturing business with excellent prospects. Mechanical Fitter - Role and Responsibilities Fitter / Mechanical Fitter / Flow Control / Pumps / Valves / Motors / Hydraulics Stripping and inspection of hydraulics returned for repair Report writing on faults and analysing for root cause of failure Rebuilding of stripped equipment, post build testing and associated paperwork Responsible for the general cleanliness and care of personal workbench area and that of the main workshop Mechanical Fitter - Role and Responsibilities Fitter / Mechanical Fitter / Flow Control / Pumps / Valves / Motors / Hydraulics Mechanical Engineering apprenticeship or equivalent Prior experience of working on hydraulics Able to carry out testing and fault finding to determine the serviceability of flow control equipment Mechanical Fitter, Flow Control, Pumps, Workshop Engineer, Valves, Motors / Hydraulics This is an excellent job for a skilled fitter, if you feel you meet the above requirements please do apply now.
Oct 07, 2025
Full time
Our client, a manufacturing business in, seek to appoint a Mechanical Fitter to their Service team. This is a site-based position without travel. The appointed Mechanical Fitter will be working on a wide range of machinery, stripping and inspecting products returned to site for repair, completing brief paperwork on faults, selecting parts for rebuild, and then re-assembling and testing products ready to be shipped back to the customer. You will receive an excellent salary in a positive atmosphere working for a large manufacturing business with excellent prospects. Mechanical Fitter - Role and Responsibilities Fitter / Mechanical Fitter / Flow Control / Pumps / Valves / Motors / Hydraulics Stripping and inspection of hydraulics returned for repair Report writing on faults and analysing for root cause of failure Rebuilding of stripped equipment, post build testing and associated paperwork Responsible for the general cleanliness and care of personal workbench area and that of the main workshop Mechanical Fitter - Role and Responsibilities Fitter / Mechanical Fitter / Flow Control / Pumps / Valves / Motors / Hydraulics Mechanical Engineering apprenticeship or equivalent Prior experience of working on hydraulics Able to carry out testing and fault finding to determine the serviceability of flow control equipment Mechanical Fitter, Flow Control, Pumps, Workshop Engineer, Valves, Motors / Hydraulics This is an excellent job for a skilled fitter, if you feel you meet the above requirements please do apply now.
Role: Mechanical Maintenance Engineer / Mechanical Fitter Hours: 7:00pm till 3:30am / 3pm till 12:00am, Mon to Fri - Permanent nights - some flex on start/finish times and working days (can do Sunday to Thursday etc) Salary: 43,000- 45,000, plus Benefits and Career opportunities Location: Commutable from Spalding, Grantham, Peterborough, Bourne, Sleaford, and surrounding areas Company We are currently recruiting a Mechanical Maintenance Engineer / Mechanical Fitter to work within a small maintenance team for a Food manufacturing company. You will benefit from joining this very friendly and family feel environment, backed by a supported company who are their to ensure you get the best out from them and are given all what you need to be successful. The role is working permanent nights with some flexibility around start/finish times and the working days. If you have a background in Mechanical Maintenance and/or Service in any environment, such as industrial, manufacturing, production FMCG or similiar, we want to hear from you! Don't delay and apply now to be considered for this exciting opportunity with a successful company that continues to grow. Responsibilities This roles primary focus is proactive maintenance, working through planned preventative maintenance of the machinery and equipment throughout the site. With it being a very small small team, the role is extremely varied, rather autonomous and will give you the opportunity to make it your own. Machinery mainly consists of conveyors and packaging machinery. In and around the above, you will also assist with any reactive work, attending to and resolving breakdowns urgently, general project work, machinery upgrades, installation, ad-hoc facilities, coordinating any specialist contractors when on-site and help support continuous improvements. Requirements Mechanical Maintenance Engineer / Mechanical Fitter Holding qualifications or equivalent experience in mechanical or similar Maintenance or Service Engineer background in any environment, ideally industrial, manufacturing, production or automated etc. Have maintenance and troubleshooting skills across SOME of the following; motors, belts, bearings, chains, gears, pumps, pneumatics, hydraulics etc. Planned preventative maintenance experience Good troubleshooting & fault-finding skills. Friendly and adaptable with the ability to work well as part of a close-knit team Proactive, self-starter work attitude and can be flexible and able to give & take on start & finish times when necessary. Ensure all activities are carried out in accordance with the Site Health and Safety instructions. If this role sounds of interest, please apply now and send your most up to date CV to Wesley at TechNichols Resourcing to be considered. Or call TechNichols Resourcing and speak with Wesley for further information. We will endeavour to get back to all applicants but if you have not heard back within 5 working days unfortunately your application has been unsuccessful.
Oct 07, 2025
Full time
Role: Mechanical Maintenance Engineer / Mechanical Fitter Hours: 7:00pm till 3:30am / 3pm till 12:00am, Mon to Fri - Permanent nights - some flex on start/finish times and working days (can do Sunday to Thursday etc) Salary: 43,000- 45,000, plus Benefits and Career opportunities Location: Commutable from Spalding, Grantham, Peterborough, Bourne, Sleaford, and surrounding areas Company We are currently recruiting a Mechanical Maintenance Engineer / Mechanical Fitter to work within a small maintenance team for a Food manufacturing company. You will benefit from joining this very friendly and family feel environment, backed by a supported company who are their to ensure you get the best out from them and are given all what you need to be successful. The role is working permanent nights with some flexibility around start/finish times and the working days. If you have a background in Mechanical Maintenance and/or Service in any environment, such as industrial, manufacturing, production FMCG or similiar, we want to hear from you! Don't delay and apply now to be considered for this exciting opportunity with a successful company that continues to grow. Responsibilities This roles primary focus is proactive maintenance, working through planned preventative maintenance of the machinery and equipment throughout the site. With it being a very small small team, the role is extremely varied, rather autonomous and will give you the opportunity to make it your own. Machinery mainly consists of conveyors and packaging machinery. In and around the above, you will also assist with any reactive work, attending to and resolving breakdowns urgently, general project work, machinery upgrades, installation, ad-hoc facilities, coordinating any specialist contractors when on-site and help support continuous improvements. Requirements Mechanical Maintenance Engineer / Mechanical Fitter Holding qualifications or equivalent experience in mechanical or similar Maintenance or Service Engineer background in any environment, ideally industrial, manufacturing, production or automated etc. Have maintenance and troubleshooting skills across SOME of the following; motors, belts, bearings, chains, gears, pumps, pneumatics, hydraulics etc. Planned preventative maintenance experience Good troubleshooting & fault-finding skills. Friendly and adaptable with the ability to work well as part of a close-knit team Proactive, self-starter work attitude and can be flexible and able to give & take on start & finish times when necessary. Ensure all activities are carried out in accordance with the Site Health and Safety instructions. If this role sounds of interest, please apply now and send your most up to date CV to Wesley at TechNichols Resourcing to be considered. Or call TechNichols Resourcing and speak with Wesley for further information. We will endeavour to get back to all applicants but if you have not heard back within 5 working days unfortunately your application has been unsuccessful.
Lead Recruitment Group Limited
Durham, County Durham
Our Client; Mechanical Installation Engineer / Pipefitter required for our client, they are a Mechanical Contractor based in Leeds. The Mechanical Installation Engineer / Mechanical Fitter will travel throughout the North East regions attending commercial mechanical fit out projects. Mechanical Installation Engineer / Pipefitter Key Responsibilities: - Working on occupied commercial and industrial properties carrying out plant room replacement work and occasionally commercial new builds - Responsibilities include installation of pipework for HVAC / Mechanical commercial systems including, radiators, cylinders, hot water systems, pumps, booster sets, boilers etc. - 1st and 2nd fix of commercial plumbing systems - Occasionally overseeing other engineers / installers and ensure work is complete to high standard - Attending sites throughout areas such as Newcastle, Sunderland, Durham, Middlesbrough, and occasionally further afield Mechanical Installation Engineer / Pipefitter Requirements: - NVQ Level 2 or equivalent in plumbing and heating - ACS Commercial Gas Tickets - desirable - Based in the North East - Full UK Driving License Mechanical Installation Engineer / Pipefitter remuneration: - Salary 42,000 - 46,000 (Expected earning 65,000 - 70,000) - Travel Pay (After 15 mins) - Overnight allowance of 35 per night - Overtime available - Company Van - Company Phone/ Tablet - 22 days holiday + BH - 4 day working week available - Further training and development - Pension
Oct 06, 2025
Full time
Our Client; Mechanical Installation Engineer / Pipefitter required for our client, they are a Mechanical Contractor based in Leeds. The Mechanical Installation Engineer / Mechanical Fitter will travel throughout the North East regions attending commercial mechanical fit out projects. Mechanical Installation Engineer / Pipefitter Key Responsibilities: - Working on occupied commercial and industrial properties carrying out plant room replacement work and occasionally commercial new builds - Responsibilities include installation of pipework for HVAC / Mechanical commercial systems including, radiators, cylinders, hot water systems, pumps, booster sets, boilers etc. - 1st and 2nd fix of commercial plumbing systems - Occasionally overseeing other engineers / installers and ensure work is complete to high standard - Attending sites throughout areas such as Newcastle, Sunderland, Durham, Middlesbrough, and occasionally further afield Mechanical Installation Engineer / Pipefitter Requirements: - NVQ Level 2 or equivalent in plumbing and heating - ACS Commercial Gas Tickets - desirable - Based in the North East - Full UK Driving License Mechanical Installation Engineer / Pipefitter remuneration: - Salary 42,000 - 46,000 (Expected earning 65,000 - 70,000) - Travel Pay (After 15 mins) - Overnight allowance of 35 per night - Overtime available - Company Van - Company Phone/ Tablet - 22 days holiday + BH - 4 day working week available - Further training and development - Pension
Service Engineer, up to 35K, Van, laptop, Fuel Card, permeant position, 8am - 4.30pm Monday - No weekend work, occasional international travel (all expenses paid - can also take family member if you wish) Location: Scunthorpe (with UK and occasional overseas travel) We are seeking a Mechanical or Auto Electrical engineer to work at a Service Engineer that will be based predominantly at a Scunthorpe site to manage the final preparation steps before tankers are handed over to truck OEMs (DAF, MAN, Scania, Volvo etc.) for PDI or final delivery. This role involves a blend of coordination, technical checks, and practical problem-solving, ensuring every unit is ready for customer use. The role a fairly niche so as result training will be provided where needed. The position would suit anyone that has worked as a HGV Technician, Generator Engineer, Fork Truck/ Pump engineer, Auto Electrician or somebody who has worked a mechanical fitter. Key Responsibilities: Arrange and track truck programming with OEMs, ensuring work is completed on schedule. Run checks on metering systems prior to calibration, including leak checks and minor repairs where necessary. Liaise with calibration providers and assist during on-site calibration. Coordinate with Clugston Distribution to move vehicles through ADR test bays and into workshop areas. Attend fortnightly planning meetings at the Leeds office. Travel to the European manufacturing plant when necessary for project or product support. Ideal Service Engineer background Experience working with diesel generators, diesel pumps, or similar equipment. Practical knowledge of mechanical systems; familiarity with 24V electrics and pneumatic systems would be advantageous. Organised and proactive, with strong coordination and communication skills. Flexible approach, willing to travel both in the UK and overseas. Ability to work independently as well as liaise effectively with subcontractors and OEM partners. Benefits of the Service Enginer role: 35K, plus Van, laptop/tablet, phone Opportunities for training and development within a growing business. Travel opportunities across the UK and Europe Be part of a supportive and ambitious team in a rapidly expanding company. All expenses paid team meetings/nights out If you would like a private chat about the role, please contact Rodger Morley at E3 Recruitment
Oct 05, 2025
Full time
Service Engineer, up to 35K, Van, laptop, Fuel Card, permeant position, 8am - 4.30pm Monday - No weekend work, occasional international travel (all expenses paid - can also take family member if you wish) Location: Scunthorpe (with UK and occasional overseas travel) We are seeking a Mechanical or Auto Electrical engineer to work at a Service Engineer that will be based predominantly at a Scunthorpe site to manage the final preparation steps before tankers are handed over to truck OEMs (DAF, MAN, Scania, Volvo etc.) for PDI or final delivery. This role involves a blend of coordination, technical checks, and practical problem-solving, ensuring every unit is ready for customer use. The role a fairly niche so as result training will be provided where needed. The position would suit anyone that has worked as a HGV Technician, Generator Engineer, Fork Truck/ Pump engineer, Auto Electrician or somebody who has worked a mechanical fitter. Key Responsibilities: Arrange and track truck programming with OEMs, ensuring work is completed on schedule. Run checks on metering systems prior to calibration, including leak checks and minor repairs where necessary. Liaise with calibration providers and assist during on-site calibration. Coordinate with Clugston Distribution to move vehicles through ADR test bays and into workshop areas. Attend fortnightly planning meetings at the Leeds office. Travel to the European manufacturing plant when necessary for project or product support. Ideal Service Engineer background Experience working with diesel generators, diesel pumps, or similar equipment. Practical knowledge of mechanical systems; familiarity with 24V electrics and pneumatic systems would be advantageous. Organised and proactive, with strong coordination and communication skills. Flexible approach, willing to travel both in the UK and overseas. Ability to work independently as well as liaise effectively with subcontractors and OEM partners. Benefits of the Service Enginer role: 35K, plus Van, laptop/tablet, phone Opportunities for training and development within a growing business. Travel opportunities across the UK and Europe Be part of a supportive and ambitious team in a rapidly expanding company. All expenses paid team meetings/nights out If you would like a private chat about the role, please contact Rodger Morley at E3 Recruitment
