Job Title: Health and Safety Advisor - Capital Delivery and Engineering Location: Flexible across Southern Water's region (Isle of Wight to Kent) - Hybrid working (with an expectation of site/office presence for 3 days of the week which may be at either one of our sites or at our Falmer office) Contract Type: Permanent Hours: 37 hours per week Salary: Up to £58,500 for candidates who hold NEBOSH Level 6 Diploma (or equivalent) and have relevant industry and engineering experience. Circa £50,500 for candidates with a NEBOSH Level 3 General Certificate and relevant engineering or environmental experience, and ideally working towards NEBOSH Level 6 Diploma Where applicable, Southern Water will support progression to NEBOSH Level 6 as part of the role. About the role Are you passionate about creating safe, secure environments where employees and contractors can thrive? We are seeking a proactive and experienced Health and Safety Advisor to join our Capital Delivery team within the wider Health, Safety and Security (HSS) function at Southern Water. In this key role, you will provide professional health and safety advice and assurance across engineering and capital delivery projects, supporting compliance with legislation and helping to embed a strong safety culture across our infrastructure development and maintenance activities. You will work closely with engineering, design and project teams to influence safety from the earliest stages of project design, supporting HAZOP and safety design reviews, conduct site inspections as part of the pre-construction and commissioning phases, carry out auditing activities on our contractor management systems, and monitor safety performance and compliance with our CDM procedures, ensuring risks are effectively managed and lessons learned are shared. What you will be responsible for: Delivering and monitoring performance against Southern Water's Health, Safety and Security strategy and objectives within the Capital Delivery function. Providing expert health and safety advice to design, engineering and project teams, ensuring compliance with relevant legislation, industry best practice and Southern Water standards. Leading site inspections, hazard identification activities and root cause investigations on capital delivery projects. Supporting and influencing engineering and design teams through practical coaching and mentoring to strengthen health and safety compliance and capability. Providing technical advice in high-risk areas, including temporary works, Construction Design and Management (CDM), site set-up, excavations, service avoidance, chemical storage and hazardous substances. Leading and supporting incident investigations within your area of responsibility, producing clear reports and recommending corrective and preventative actions. What you'll bring to the role: Essential Comprehensive knowledge of UK health and safety legislation and its practical application within design, planning and construction environments. Proven experience working in a health and safety advisory role, ideally within construction, engineering or capital delivery. NEBOSH Level 6 Diploma (or equivalent) qualification. Strong knowledge and application of CDM 2015 Regulations, especially from the client and Principal Designer perspective. Excellent communication skills, including investigation interviewing, report writing and the ability to influence a wide range of stakeholders. Full UK driving licence, due to the multi-site nature of the role. Desirable Membership of IOSH at CertIOSH level as a minimum (CMIOSH or CFIOSH highly desirable). Exposure to process safety. An engineering background, particularly mechanical or electrical. Water Industry experience.
May 05, 2026
Full time
Job Title: Health and Safety Advisor - Capital Delivery and Engineering Location: Flexible across Southern Water's region (Isle of Wight to Kent) - Hybrid working (with an expectation of site/office presence for 3 days of the week which may be at either one of our sites or at our Falmer office) Contract Type: Permanent Hours: 37 hours per week Salary: Up to £58,500 for candidates who hold NEBOSH Level 6 Diploma (or equivalent) and have relevant industry and engineering experience. Circa £50,500 for candidates with a NEBOSH Level 3 General Certificate and relevant engineering or environmental experience, and ideally working towards NEBOSH Level 6 Diploma Where applicable, Southern Water will support progression to NEBOSH Level 6 as part of the role. About the role Are you passionate about creating safe, secure environments where employees and contractors can thrive? We are seeking a proactive and experienced Health and Safety Advisor to join our Capital Delivery team within the wider Health, Safety and Security (HSS) function at Southern Water. In this key role, you will provide professional health and safety advice and assurance across engineering and capital delivery projects, supporting compliance with legislation and helping to embed a strong safety culture across our infrastructure development and maintenance activities. You will work closely with engineering, design and project teams to influence safety from the earliest stages of project design, supporting HAZOP and safety design reviews, conduct site inspections as part of the pre-construction and commissioning phases, carry out auditing activities on our contractor management systems, and monitor safety performance and compliance with our CDM procedures, ensuring risks are effectively managed and lessons learned are shared. What you will be responsible for: Delivering and monitoring performance against Southern Water's Health, Safety and Security strategy and objectives within the Capital Delivery function. Providing expert health and safety advice to design, engineering and project teams, ensuring compliance with relevant legislation, industry best practice and Southern Water standards. Leading site inspections, hazard identification activities and root cause investigations on capital delivery projects. Supporting and influencing engineering and design teams through practical coaching and mentoring to strengthen health and safety compliance and capability. Providing technical advice in high-risk areas, including temporary works, Construction Design and Management (CDM), site set-up, excavations, service avoidance, chemical storage and hazardous substances. Leading and supporting incident investigations within your area of responsibility, producing clear reports and recommending corrective and preventative actions. What you'll bring to the role: Essential Comprehensive knowledge of UK health and safety legislation and its practical application within design, planning and construction environments. Proven experience working in a health and safety advisory role, ideally within construction, engineering or capital delivery. NEBOSH Level 6 Diploma (or equivalent) qualification. Strong knowledge and application of CDM 2015 Regulations, especially from the client and Principal Designer perspective. Excellent communication skills, including investigation interviewing, report writing and the ability to influence a wide range of stakeholders. Full UK driving licence, due to the multi-site nature of the role. Desirable Membership of IOSH at CertIOSH level as a minimum (CMIOSH or CFIOSH highly desirable). Exposure to process safety. An engineering background, particularly mechanical or electrical. Water Industry experience.
Job Title: CFD Engineer Location: Barrow in Furness - On-site Role Type: Permanent Salary: 42,000 - 50,000 + benefits Our client, an established defence engineering firm, require an experienced CFD Engineer to join their multi-disciplined team in Barrow in Furness. Working on cutting-edge marine systems, this role offers hands-on experience with high-performance computing (HPC) systems and advanced CFD tools. Support with relocation costs can be discussed and included in an offer package, subject to HR approval. What the role of the CFD Engineer entails: Support the Principal Engineer - Numerical Modelling with the development of the Stealth Engineering CFD capability Running and interpreting CFD simulations to assess fluid dynamics and their impact on acoustic and non-acoustic signatures Supporting concept development, design iterations, and verification activities using commercial CFD tools Preparing technical reports and presenting findings to internal teams and stakeholders Working closely with engineers from other disciplines to integrate CFD insights into whole-platform solutions Assisting in the development of testing strategies and experimental validation where appropriate What experience you need to be the successful CFD Engineer: Degree in a STEM discipline, such as Mechanical Engineering, Aerospace Engineering, Applied Physics, or Mathematics Experience using CFD software (such as ANSYS Fluent, STAR-CCM+, or OpenFOAM) Strong understanding of fluid mechanics The ability to interpret and communicate multi-layered data clearly A self-motivated approach Candidates would need to hold British nationality and have lived & worked in the UK for 5+ years and be eligible for SC security clearance. This really is a fantastic opportunity for a CFD to progress their career. If you are interested please apply as soon as possible as this position will be filled quickly so don't miss out! Services advertised by Gold Group are those of an Agency and/or an Employment Business. We will contact you within the next 14 days if you are selected for interview. For a copy of our privacy policy please visit our website.
May 05, 2026
Full time
Job Title: CFD Engineer Location: Barrow in Furness - On-site Role Type: Permanent Salary: 42,000 - 50,000 + benefits Our client, an established defence engineering firm, require an experienced CFD Engineer to join their multi-disciplined team in Barrow in Furness. Working on cutting-edge marine systems, this role offers hands-on experience with high-performance computing (HPC) systems and advanced CFD tools. Support with relocation costs can be discussed and included in an offer package, subject to HR approval. What the role of the CFD Engineer entails: Support the Principal Engineer - Numerical Modelling with the development of the Stealth Engineering CFD capability Running and interpreting CFD simulations to assess fluid dynamics and their impact on acoustic and non-acoustic signatures Supporting concept development, design iterations, and verification activities using commercial CFD tools Preparing technical reports and presenting findings to internal teams and stakeholders Working closely with engineers from other disciplines to integrate CFD insights into whole-platform solutions Assisting in the development of testing strategies and experimental validation where appropriate What experience you need to be the successful CFD Engineer: Degree in a STEM discipline, such as Mechanical Engineering, Aerospace Engineering, Applied Physics, or Mathematics Experience using CFD software (such as ANSYS Fluent, STAR-CCM+, or OpenFOAM) Strong understanding of fluid mechanics The ability to interpret and communicate multi-layered data clearly A self-motivated approach Candidates would need to hold British nationality and have lived & worked in the UK for 5+ years and be eligible for SC security clearance. This really is a fantastic opportunity for a CFD to progress their career. If you are interested please apply as soon as possible as this position will be filled quickly so don't miss out! Services advertised by Gold Group are those of an Agency and/or an Employment Business. We will contact you within the next 14 days if you are selected for interview. For a copy of our privacy policy please visit our website.
Senior Principal Associate - Mechanical Engineering 60,000 per annum (Negotiable) Office based, with occasional site visits Market Leading Client in Wales Overview My client is seeking a highly skilled and experienced Senior Principal Associate with a strong mechanical engineering background to join our Cardiff-based team. This is an exciting opportunity to work with one of Wales' leading specialist consultancies in Mechanical, Electrical, Public Health, and Sustainability engineering. Their projects span a wide range of sectors, including education, healthcare, heritage, industrial, commercial offices, residential developments, and community infrastructure. This role is ideal for a professional with senior-level expertise in mechanical design, excellent client-facing skills, and the ability to lead and deliver innovative, sustainable design solutions. Benefits Competitive salary of 60,000 (negotiable based on experience). Opportunity to work on diverse and impactful projects across multiple sectors. Professional development and career progression opportunities. Collaborative and supportive work environment. Mileage reimbursement for site visits. Flexible salary negotiation to attract the right candidate. Day-to-Day Work from our Cardiff-based office, collaborating with a dynamic and professional team. Attend client meetings to discuss project requirements and provide updates. Conduct site visits, including occasional travel to Haverfordwest, to inspect and supervise ongoing projects. Develop and review mechanical design solutions tailored to client needs. Provide guidance and support to junior engineers and team members. Ensure all work complies with industry standards, regulations, and best practices. Responsibilities Lead mechanical design projects from concept to completion, ensuring high-quality and sustainable solutions. Conduct site inspections, including occasional visits to Haverfordwest, to oversee project progress and ensure compliance with design specifications. Act as the primary point of contact for clients, fostering strong relationships and ensuring their needs are met. Collaborate with multidisciplinary teams to deliver tailored engineering solutions across various sectors. Provide technical leadership and mentorship to junior team members. Prepare and review technical reports, drawings, and specifications. Ensure projects are delivered on time, within budget, and to the highest standards of quality. Qualifications A degree in Mechanical Engineering or a related field. Extensive experience in mechanical design, with a proven track record of delivering complex projects. Strong client-facing skills, with the ability to communicate effectively and build lasting relationships. A valid driver's license and willingness to travel for site visits as required. Senior-level knowledge and expertise in mechanical engineering principles and practices. Proficiency in relevant design software and tools. Chartered Engineer status (or working towards it) is highly desirable. If you are a seasoned mechanical engineering professional with a passion for delivering innovative solutions and building strong client relationships, we would love to hear from you. Join our client in shaping the future of sustainable engineering design. Apply today to take the next step in your career!
May 05, 2026
Full time
Senior Principal Associate - Mechanical Engineering 60,000 per annum (Negotiable) Office based, with occasional site visits Market Leading Client in Wales Overview My client is seeking a highly skilled and experienced Senior Principal Associate with a strong mechanical engineering background to join our Cardiff-based team. This is an exciting opportunity to work with one of Wales' leading specialist consultancies in Mechanical, Electrical, Public Health, and Sustainability engineering. Their projects span a wide range of sectors, including education, healthcare, heritage, industrial, commercial offices, residential developments, and community infrastructure. This role is ideal for a professional with senior-level expertise in mechanical design, excellent client-facing skills, and the ability to lead and deliver innovative, sustainable design solutions. Benefits Competitive salary of 60,000 (negotiable based on experience). Opportunity to work on diverse and impactful projects across multiple sectors. Professional development and career progression opportunities. Collaborative and supportive work environment. Mileage reimbursement for site visits. Flexible salary negotiation to attract the right candidate. Day-to-Day Work from our Cardiff-based office, collaborating with a dynamic and professional team. Attend client meetings to discuss project requirements and provide updates. Conduct site visits, including occasional travel to Haverfordwest, to inspect and supervise ongoing projects. Develop and review mechanical design solutions tailored to client needs. Provide guidance and support to junior engineers and team members. Ensure all work complies with industry standards, regulations, and best practices. Responsibilities Lead mechanical design projects from concept to completion, ensuring high-quality and sustainable solutions. Conduct site inspections, including occasional visits to Haverfordwest, to oversee project progress and ensure compliance with design specifications. Act as the primary point of contact for clients, fostering strong relationships and ensuring their needs are met. Collaborate with multidisciplinary teams to deliver tailored engineering solutions across various sectors. Provide technical leadership and mentorship to junior team members. Prepare and review technical reports, drawings, and specifications. Ensure projects are delivered on time, within budget, and to the highest standards of quality. Qualifications A degree in Mechanical Engineering or a related field. Extensive experience in mechanical design, with a proven track record of delivering complex projects. Strong client-facing skills, with the ability to communicate effectively and build lasting relationships. A valid driver's license and willingness to travel for site visits as required. Senior-level knowledge and expertise in mechanical engineering principles and practices. Proficiency in relevant design software and tools. Chartered Engineer status (or working towards it) is highly desirable. If you are a seasoned mechanical engineering professional with a passion for delivering innovative solutions and building strong client relationships, we would love to hear from you. Join our client in shaping the future of sustainable engineering design. Apply today to take the next step in your career!
Job Title: Principal Engineer -Site Asset Safety Verification Location: Barrow-in-Furness. Hybrid - once a quarter onsite We offer a range of hybrid and flexible working arrangements - please speak to your recruiter about the options for this particular role Salary: £60,000 depending on experience Who we are: Join BAE Systems and you'll be part of something bigger. As a valued member of our global colleague network, you'll bring your unique skills and perspectives to help pioneer progress and protect what matters most. You'll be trusted to play your part in delivering the advanced, technology-led defence, aerospace and security solutions of tomorrow, shaping a safer future, for all of us. From the depths of the ocean, to the far reaches of space, there's no limit to where a career at BAE Systems could take you. Job Description: As a member of the Site Engineering Nuclear Substantiation team Your role is responsible for authoring and managing site assets' & infrastructure design substantiation documentation supporting the site nuclear safety case. This will include reviewing analyses , assessments, and calculations supporting nuclear design substantiation. You'll support periodic review of safety. You'll take ownership of deliverables and demonstrate high levels of autonomy and leadership . Core duties: You will support the implementation of design substantiation requirements. You will work closely with a broad range of stakeholders including Site Safety Case, Human Factors, and Engineering Authority Teams. You will collaborate with the wider business on site assets nuclear design substantiation related activities. Essential Skills: You will bring your experience in a complex or high-risk industry (i.e. Aerospace, Oil & Gas, OME, Shipbuilding, Weapons etc.) to this role You will be degree qualified or time served apprentice in a STEM subject or equivalent working experience You will showcase your ability to produce high quality technical reports The Site Engineering - Nuclear Substantiation Team: You will be joining a key team with some great development opportunities both in the technical and managerial streams. Native to the team, there are opportunities to get involved in the design substantiation and safety justification of a variety of site assets and facilities spanning mechanical, civil and structural. This role offers plenty of development opportunities through various avenues, engaging cross functionally to help drive and deliver an exceptionally varied and diverse scope, to suite you and your career aspirations. This could be an exciting and fulfilling opportunity waiting for you at the Nuclear Substantiation team - SEA (DDC) at BAE Systems. . We offer relocation support packages across all Submarine roles, subject to meeting eligibility criteria. Why BAE Systems? Here you'll build a career with purpose and limitless possibilities. With lifelong learning and meaningful work, this is a place where you can grow your career with confidence and be empowered to be your best. You'll be recognised for your contribution and enjoy rewards tailored to what's most important to you and your family, support for your financial and personal wellbeing, as well as a balanced lifestyle. In an environment embracing sustainable ways of working and with a strong sense of shared purpose, our supportive culture is a place you can feel you belong and proud of the difference you make. A place where everyone can thrive: We're committed to building an inclusive workplace where everyone feels valued and supported. We know that a diversity of backgrounds, perspectives and experiences strengthens our teams and is vital to the work we do. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date: 13th May 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible.
May 05, 2026
Full time
Job Title: Principal Engineer -Site Asset Safety Verification Location: Barrow-in-Furness. Hybrid - once a quarter onsite We offer a range of hybrid and flexible working arrangements - please speak to your recruiter about the options for this particular role Salary: £60,000 depending on experience Who we are: Join BAE Systems and you'll be part of something bigger. As a valued member of our global colleague network, you'll bring your unique skills and perspectives to help pioneer progress and protect what matters most. You'll be trusted to play your part in delivering the advanced, technology-led defence, aerospace and security solutions of tomorrow, shaping a safer future, for all of us. From the depths of the ocean, to the far reaches of space, there's no limit to where a career at BAE Systems could take you. Job Description: As a member of the Site Engineering Nuclear Substantiation team Your role is responsible for authoring and managing site assets' & infrastructure design substantiation documentation supporting the site nuclear safety case. This will include reviewing analyses , assessments, and calculations supporting nuclear design substantiation. You'll support periodic review of safety. You'll take ownership of deliverables and demonstrate high levels of autonomy and leadership . Core duties: You will support the implementation of design substantiation requirements. You will work closely with a broad range of stakeholders including Site Safety Case, Human Factors, and Engineering Authority Teams. You will collaborate with the wider business on site assets nuclear design substantiation related activities. Essential Skills: You will bring your experience in a complex or high-risk industry (i.e. Aerospace, Oil & Gas, OME, Shipbuilding, Weapons etc.) to this role You will be degree qualified or time served apprentice in a STEM subject or equivalent working experience You will showcase your ability to produce high quality technical reports The Site Engineering - Nuclear Substantiation Team: You will be joining a key team with some great development opportunities both in the technical and managerial streams. Native to the team, there are opportunities to get involved in the design substantiation and safety justification of a variety of site assets and facilities spanning mechanical, civil and structural. This role offers plenty of development opportunities through various avenues, engaging cross functionally to help drive and deliver an exceptionally varied and diverse scope, to suite you and your career aspirations. This could be an exciting and fulfilling opportunity waiting for you at the Nuclear Substantiation team - SEA (DDC) at BAE Systems. . We offer relocation support packages across all Submarine roles, subject to meeting eligibility criteria. Why BAE Systems? Here you'll build a career with purpose and limitless possibilities. With lifelong learning and meaningful work, this is a place where you can grow your career with confidence and be empowered to be your best. You'll be recognised for your contribution and enjoy rewards tailored to what's most important to you and your family, support for your financial and personal wellbeing, as well as a balanced lifestyle. In an environment embracing sustainable ways of working and with a strong sense of shared purpose, our supportive culture is a place you can feel you belong and proud of the difference you make. A place where everyone can thrive: We're committed to building an inclusive workplace where everyone feels valued and supported. We know that a diversity of backgrounds, perspectives and experiences strengthens our teams and is vital to the work we do. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date: 13th May 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible.
Babcock Mission Critical Services España SA.
Carlisle, Cumbria
Principal Mechanical Engineer Location: Egremont, Carlisle, GB, CA24 3HZ Onsite or Hybrid: Hybrid Role Type: Full time / Permanent Role ID: SF70329 Lead Engineering Excellence in Nuclear Decommissioning At Cavendish Nuclear, we're working to create a safe and secure world. If you join us, you can play your part as a Principal Mechanical Engineer at either of our Westlake's Science Park, Moor Row, or Warrington, Cheshire sites. The Role As a Principal Mechanical Engineer, you'll play a pivotal role in one of the UK's major civil nuclear decommissioning programmes. Working as a senior technical authority within a multidisciplinary engineering environment, you'll drive the integration of complex mechanical systems and develop innovative solutions that directly support the safe deconstruction and long term management of nuclear facilities. You'll lead engineering teams, oversee high integrity technical outputs, safeguard design quality, and act as a primary interface for customers-while mentoring engineers and championing continuous improvement across projects. This role places you at the technical forefront of a major expansion within the Cavendish Nuclear Design Services Alliance. Day-to-day Responsibilities Lead and manage multidisciplinary engineering teams to deliver high quality technical solutions. Supervise and mentor engineers and technical specialists to ensure performance and development. Act as a key liaison with customers, ensuring transparent communication and technical clarity. Oversee production, review, and approval of engineering outputs-including calculations, specifications, and reports. Champion safety, quality, and engineering best practice across all project activities. This is a full time position working 37 hours, 5 days per week, based at either Westlake's Science Park, Moor Row, or Warrington, Cheshire sites. Essential Experience Extensive experience leading multidisciplinary engineering teams and delivering complex technical projects. Proven ability to supervise and mentor engineers and technical specialists. Strong background in producing, reviewing, and approving detailed engineering outputs. Demonstrated expertise in applying procedures, codes, and standards to ensure compliance and integrity. Track record of effective customer engagement, issue resolution, and technical support. Qualifications Engineering degree (or equivalent) in a relevant engineering discipline. Benefits Matched contribution pension scheme, with life assurance. Access to a Digital GP, annual health check, and nutritional consultations through Aviva DigiCare+. Employee share scheme. Employee shopping savings portal. Payment of Professional Fees. Reservists in the armed forces receive 10 days of special paid leave. Holiday Trading allows employees to buy additional leave or sell up to one working week of annual leave from their entitlement (available February through March). 'Be Kind Day' enables employees to take one paid leave day a year (or equivalent hours) to volunteer with their chosen charity. Excellent development opportunities and benefits package, including an employee assistance programme supporting physical, mental, and financial wellbeing. Additional Information We are a disability confident committed employer. If you have a disability or need any reasonable adjustments during the application and selection stages, please email with the subject header "Reasonable adjustments requirement". We're committed to building an inclusive culture where everyone's free to thrive. We are happy to talk about flexible working - please ask about alternative patterns of work at interview.
May 05, 2026
Full time
Principal Mechanical Engineer Location: Egremont, Carlisle, GB, CA24 3HZ Onsite or Hybrid: Hybrid Role Type: Full time / Permanent Role ID: SF70329 Lead Engineering Excellence in Nuclear Decommissioning At Cavendish Nuclear, we're working to create a safe and secure world. If you join us, you can play your part as a Principal Mechanical Engineer at either of our Westlake's Science Park, Moor Row, or Warrington, Cheshire sites. The Role As a Principal Mechanical Engineer, you'll play a pivotal role in one of the UK's major civil nuclear decommissioning programmes. Working as a senior technical authority within a multidisciplinary engineering environment, you'll drive the integration of complex mechanical systems and develop innovative solutions that directly support the safe deconstruction and long term management of nuclear facilities. You'll lead engineering teams, oversee high integrity technical outputs, safeguard design quality, and act as a primary interface for customers-while mentoring engineers and championing continuous improvement across projects. This role places you at the technical forefront of a major expansion within the Cavendish Nuclear Design Services Alliance. Day-to-day Responsibilities Lead and manage multidisciplinary engineering teams to deliver high quality technical solutions. Supervise and mentor engineers and technical specialists to ensure performance and development. Act as a key liaison with customers, ensuring transparent communication and technical clarity. Oversee production, review, and approval of engineering outputs-including calculations, specifications, and reports. Champion safety, quality, and engineering best practice across all project activities. This is a full time position working 37 hours, 5 days per week, based at either Westlake's Science Park, Moor Row, or Warrington, Cheshire sites. Essential Experience Extensive experience leading multidisciplinary engineering teams and delivering complex technical projects. Proven ability to supervise and mentor engineers and technical specialists. Strong background in producing, reviewing, and approving detailed engineering outputs. Demonstrated expertise in applying procedures, codes, and standards to ensure compliance and integrity. Track record of effective customer engagement, issue resolution, and technical support. Qualifications Engineering degree (or equivalent) in a relevant engineering discipline. Benefits Matched contribution pension scheme, with life assurance. Access to a Digital GP, annual health check, and nutritional consultations through Aviva DigiCare+. Employee share scheme. Employee shopping savings portal. Payment of Professional Fees. Reservists in the armed forces receive 10 days of special paid leave. Holiday Trading allows employees to buy additional leave or sell up to one working week of annual leave from their entitlement (available February through March). 'Be Kind Day' enables employees to take one paid leave day a year (or equivalent hours) to volunteer with their chosen charity. Excellent development opportunities and benefits package, including an employee assistance programme supporting physical, mental, and financial wellbeing. Additional Information We are a disability confident committed employer. If you have a disability or need any reasonable adjustments during the application and selection stages, please email with the subject header "Reasonable adjustments requirement". We're committed to building an inclusive culture where everyone's free to thrive. We are happy to talk about flexible working - please ask about alternative patterns of work at interview.
Select how often (in days) to receive an alert: Posting Date: 20 Mar 2026 City: Manchester Location: Manchester, GB, M1 3LD Contract Type: Permanent Division: Power Engineering and Renewables Level of experience: Senior RINA is currently recruiting for a Power Systems Principal Consultant to join its office in Manchester. Why RINA? RINA is a global engineering and consulting company providing technical advisory, assurance, testing, inspection, and certification services across energy and infrastructure markets. With more than 150 years of engineering heritage and a global network of professionals operating in over 70 countries, RINA delivers innovative, safe, and sustainable solutions across the full project lifecycle. Our UK operations trace their origins to 1920 through the British Electrical and Allied Industries Research Association and continue to support complex electrical and infrastructure projects across multiple sectors. The Role This is a hybrid role: you will both manage the established Power Systems Engineering team and be the technical lead for Substation design and construction projects, the focus being electro mechanical engineering, to deliver a wide range of local and international projects for commercial, industrial and utility clients. Technical Responsibilities Act as technical lead for substation design deliverables from 11 kV to 400 kV, including HV/EHV AIS and GIS substations. Develop and maintain project execution plans and ensure alignment with client and internal teams. Support project financial performance by meeting budget targets and adjusting constraints as needed. Produce detailed substation electrical design packages compliant with client, national, and international standards (ENA, BS, IEC, IEEE, ANSI, etc.). Develop design documentation including reports, scheme evaluations, FEED deliverables, and concept stage presentations. Review supplier designs, documentation, FAT plans, and participate in factory/site acceptance testing. Conduct technical quality assurance reviews and provide design approval/sign off for Protection & Control (P&C) and/or Primary design deliverables. Work closely with P&C, Civil/Structural, and other engineering disciplines to support multidisciplinary delivery. Contribute to tender schemes, technical options, and scope development. Preferred Skills and Professional Attributes Chartered Engineer (CEng) status or professional registration as an Incorporated Engineer (IEng) with the Engineering Council. Relevant Health & Safety qualification, such as IOSH Managing Safely, NEBOSH Certificate or Diploma, or NVQ Level 3 (or equivalent) in a Health & Safety-related discipline. Substation safety and access training, such as NSI 30, BESC: AIM, or equivalent authorizations. Formal training in CDM 2015, construction safety, and impressed voltage hazards. Strong understanding of UK Health & Safety legislation applicable to design and construction activities in the electricity supply industry. Good understanding of UK environmental and waste management legislation and associated compliance requirements Must be eligible to work within the UK without sponsorship and willing to commute or relocate to Manchester. In addition to the below, you will become part of our growing global team, you will find yourself working with world class professionals and clients in a global market. 25 days leave (plus bank holidays) Option to buy more holiday Up to 12 days smart working per month (post probation period) Support of Military Reservists - 10 additional paid days Healthcare cover (Family can be added at an additional cost) Life Assurance Professional development to become chartered Pay for professional membership Cycle to work scheme Generous recruitment referral bonus 4 half days paid leave for STEM Ambassadors
May 05, 2026
Full time
Select how often (in days) to receive an alert: Posting Date: 20 Mar 2026 City: Manchester Location: Manchester, GB, M1 3LD Contract Type: Permanent Division: Power Engineering and Renewables Level of experience: Senior RINA is currently recruiting for a Power Systems Principal Consultant to join its office in Manchester. Why RINA? RINA is a global engineering and consulting company providing technical advisory, assurance, testing, inspection, and certification services across energy and infrastructure markets. With more than 150 years of engineering heritage and a global network of professionals operating in over 70 countries, RINA delivers innovative, safe, and sustainable solutions across the full project lifecycle. Our UK operations trace their origins to 1920 through the British Electrical and Allied Industries Research Association and continue to support complex electrical and infrastructure projects across multiple sectors. The Role This is a hybrid role: you will both manage the established Power Systems Engineering team and be the technical lead for Substation design and construction projects, the focus being electro mechanical engineering, to deliver a wide range of local and international projects for commercial, industrial and utility clients. Technical Responsibilities Act as technical lead for substation design deliverables from 11 kV to 400 kV, including HV/EHV AIS and GIS substations. Develop and maintain project execution plans and ensure alignment with client and internal teams. Support project financial performance by meeting budget targets and adjusting constraints as needed. Produce detailed substation electrical design packages compliant with client, national, and international standards (ENA, BS, IEC, IEEE, ANSI, etc.). Develop design documentation including reports, scheme evaluations, FEED deliverables, and concept stage presentations. Review supplier designs, documentation, FAT plans, and participate in factory/site acceptance testing. Conduct technical quality assurance reviews and provide design approval/sign off for Protection & Control (P&C) and/or Primary design deliverables. Work closely with P&C, Civil/Structural, and other engineering disciplines to support multidisciplinary delivery. Contribute to tender schemes, technical options, and scope development. Preferred Skills and Professional Attributes Chartered Engineer (CEng) status or professional registration as an Incorporated Engineer (IEng) with the Engineering Council. Relevant Health & Safety qualification, such as IOSH Managing Safely, NEBOSH Certificate or Diploma, or NVQ Level 3 (or equivalent) in a Health & Safety-related discipline. Substation safety and access training, such as NSI 30, BESC: AIM, or equivalent authorizations. Formal training in CDM 2015, construction safety, and impressed voltage hazards. Strong understanding of UK Health & Safety legislation applicable to design and construction activities in the electricity supply industry. Good understanding of UK environmental and waste management legislation and associated compliance requirements Must be eligible to work within the UK without sponsorship and willing to commute or relocate to Manchester. In addition to the below, you will become part of our growing global team, you will find yourself working with world class professionals and clients in a global market. 25 days leave (plus bank holidays) Option to buy more holiday Up to 12 days smart working per month (post probation period) Support of Military Reservists - 10 additional paid days Healthcare cover (Family can be added at an additional cost) Life Assurance Professional development to become chartered Pay for professional membership Cycle to work scheme Generous recruitment referral bonus 4 half days paid leave for STEM Ambassadors
Principal Mechanical Engineer page is loaded Principal Mechanical Engineerremote type: Hybridlocations: Cambridgetime type: Full timeposted on: Posted 2 Days Agojob requisition id: R45925Xylem is a Fortune 500 global water solutions company dedicated to advancing sustainable impact and empowering the people who make water work every day. As a leading water technology company with 23,000 employees operating in over 150 countries, Xylem is at the forefront of addressing the world's most critical water challenges. We invite passionate individuals to join our team, dedicated to exceeding customer expectations through innovative and sustainable solutions.Sentec, a Xylem brand, seeks to hire an Principal Mechanical Engineer to lead our talented mechanical engineering skill group.As Principal, you will lead a mechanical engineering team on high-value, technically challenging projects, internal to Xylem and external clients. You will own mechanical architecture and key technical decisions and act as subject-matter expert in mechanical design, materials, and manufacturing. You will deliver innovative mechanical solutions from early concept through detailed design and industrialisation and validation testing. You will work directly with Xylem partners and external clients to understand requirements and translate them into robust engineering solutions, contribute to project planning, technical reporting and support proposal writing, technical scoping, and effort estimation.As a senior colleague, you will mentor and develop junior and mid-level engineers and scientists, foster a collaborative, high-performance engineering culture and set engineering best practice. You will also be responsible for supporting project management as well as business development activities under the guidance of the respective teams. The position is largely based in our Cambridge office however you will have the opportunity for some travel, this could be UK-wide, within Europe, the United States or the Far East. At Sentec you will be working in a rapidly evolving industry at an exciting time for technologists developing solutions in multiple sectors with a strong emphasis on sustainability. In order to be successful you will need to demonstrate leadership in pursuit of technical solutions and novel ideas, have a hands-on approach to problem solving and ultimately managing projects against time, budget and client expectations. This role combines hands-on engineering, technical decision-making, project and team leadership within a fast-paced consultancy environment spanning multiple sectors, working towards deadlines and delivering excellent technical solutions. You will be required to communicate effectively in a wide range of environments, both with colleagues and clients and will have the opportunity to develop your negotiation skills and expand your technical knowledge. Minimum Qualifications: Education, Experience, Skills, Abilities, License/Certification: Extensive experience (10+ years) in mechanical engineering / product development Experience in people leadership, preferably in mechanical engineering Strong 3D CAD capability (principally Creo but SolidWorks also advantageous) Proven experience taking products from concept to manufacture Hands-on experience making parts and building prototypes Experience dealing with 3rd party suppliers such as engineering workshops, plastic fabricators, hardware suppliers Excellent understanding of materials, tolerancing, and manufacturing processes Experience working in multidisciplinary teams (physics, electronics, software) Minimum 2/1 Degree (or equivalent) in Mechanical Engineering or related discipline Desirable Skills/Knowledge: Background in consultancy or contract R&D environments Experience with machinery such as lathes and milling machines Experience with 3D printing, both internal and bureau Experience in one or more sectors such as: Sensing technology such as optical, magnetic, ultrasonic Consumer and industrial products Scientific instrumentation Water infrastructure Sustainable energy Knowledge of regulatory or quality systems (e.g. ISO 13485, ISO 9001) Experience with FEA, thermal analysis, or other simulation Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Regularly required to sit or stand, reach, bend and move about the facility Work Environment: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Office: Standard office equipment; work usually performed in an office or site laboratory setting Estimated 10 % or less travel requirement Standard weekly job hours: 37.5 hours Benefits Include: Competitive salaries Holiday of 25 days per year, increases with length of service Group life cover at 4 times basic salary Private health care Salary sacrifice pension scheme Relocation expenses as appropriate Annual performance and merit process Discretionary 10% All staff bonus scheme Employee referral bonus scheme Access to flexible benefits including cycle to work, critical illness cover and green car leasing Flexible and remote workingJoin the global Xylem team to be a part of innovative technology solutions transforming water usage, conservation, and re-use. Our products impact public utilities, industrial sectors, residential areas, and commercial buildings, with a commitment to providing smart metering, network technologies, and advanced analytics for water, electric, and gas utilities. Partner with us in creating a world where water challenges are met with ingenuity and dedication; where we recognize the power of inclusion and belonging in driving innovation and allowing us to compete more effectively around the world.background, skills and interests.
May 05, 2026
Full time
Principal Mechanical Engineer page is loaded Principal Mechanical Engineerremote type: Hybridlocations: Cambridgetime type: Full timeposted on: Posted 2 Days Agojob requisition id: R45925Xylem is a Fortune 500 global water solutions company dedicated to advancing sustainable impact and empowering the people who make water work every day. As a leading water technology company with 23,000 employees operating in over 150 countries, Xylem is at the forefront of addressing the world's most critical water challenges. We invite passionate individuals to join our team, dedicated to exceeding customer expectations through innovative and sustainable solutions.Sentec, a Xylem brand, seeks to hire an Principal Mechanical Engineer to lead our talented mechanical engineering skill group.As Principal, you will lead a mechanical engineering team on high-value, technically challenging projects, internal to Xylem and external clients. You will own mechanical architecture and key technical decisions and act as subject-matter expert in mechanical design, materials, and manufacturing. You will deliver innovative mechanical solutions from early concept through detailed design and industrialisation and validation testing. You will work directly with Xylem partners and external clients to understand requirements and translate them into robust engineering solutions, contribute to project planning, technical reporting and support proposal writing, technical scoping, and effort estimation.As a senior colleague, you will mentor and develop junior and mid-level engineers and scientists, foster a collaborative, high-performance engineering culture and set engineering best practice. You will also be responsible for supporting project management as well as business development activities under the guidance of the respective teams. The position is largely based in our Cambridge office however you will have the opportunity for some travel, this could be UK-wide, within Europe, the United States or the Far East. At Sentec you will be working in a rapidly evolving industry at an exciting time for technologists developing solutions in multiple sectors with a strong emphasis on sustainability. In order to be successful you will need to demonstrate leadership in pursuit of technical solutions and novel ideas, have a hands-on approach to problem solving and ultimately managing projects against time, budget and client expectations. This role combines hands-on engineering, technical decision-making, project and team leadership within a fast-paced consultancy environment spanning multiple sectors, working towards deadlines and delivering excellent technical solutions. You will be required to communicate effectively in a wide range of environments, both with colleagues and clients and will have the opportunity to develop your negotiation skills and expand your technical knowledge. Minimum Qualifications: Education, Experience, Skills, Abilities, License/Certification: Extensive experience (10+ years) in mechanical engineering / product development Experience in people leadership, preferably in mechanical engineering Strong 3D CAD capability (principally Creo but SolidWorks also advantageous) Proven experience taking products from concept to manufacture Hands-on experience making parts and building prototypes Experience dealing with 3rd party suppliers such as engineering workshops, plastic fabricators, hardware suppliers Excellent understanding of materials, tolerancing, and manufacturing processes Experience working in multidisciplinary teams (physics, electronics, software) Minimum 2/1 Degree (or equivalent) in Mechanical Engineering or related discipline Desirable Skills/Knowledge: Background in consultancy or contract R&D environments Experience with machinery such as lathes and milling machines Experience with 3D printing, both internal and bureau Experience in one or more sectors such as: Sensing technology such as optical, magnetic, ultrasonic Consumer and industrial products Scientific instrumentation Water infrastructure Sustainable energy Knowledge of regulatory or quality systems (e.g. ISO 13485, ISO 9001) Experience with FEA, thermal analysis, or other simulation Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Regularly required to sit or stand, reach, bend and move about the facility Work Environment: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Office: Standard office equipment; work usually performed in an office or site laboratory setting Estimated 10 % or less travel requirement Standard weekly job hours: 37.5 hours Benefits Include: Competitive salaries Holiday of 25 days per year, increases with length of service Group life cover at 4 times basic salary Private health care Salary sacrifice pension scheme Relocation expenses as appropriate Annual performance and merit process Discretionary 10% All staff bonus scheme Employee referral bonus scheme Access to flexible benefits including cycle to work, critical illness cover and green car leasing Flexible and remote workingJoin the global Xylem team to be a part of innovative technology solutions transforming water usage, conservation, and re-use. Our products impact public utilities, industrial sectors, residential areas, and commercial buildings, with a commitment to providing smart metering, network technologies, and advanced analytics for water, electric, and gas utilities. Partner with us in creating a world where water challenges are met with ingenuity and dedication; where we recognize the power of inclusion and belonging in driving innovation and allowing us to compete more effectively around the world.background, skills and interests.
# Principal Testing Rigs & Labs TechnicianMechanical Engineering Job DetailsLocationAbingdon, United KingdomEmployment TypeFull-timeSalary£57kLevelIndividual ContributorPosted# Principal Testing Rigs & Labs Technician Overview of ResponsibilitiesThe salary for this role is £57,117 (inclusive of a Specialist Allowance) . Onsite working is expected for 5 days each week. This role can be based at any of the following sites; Culham, Oxfordshire This role requires employees to complete an online Baseline Personnel Security Standard (BPSS), including The Disclosure & Barring Service (DBS) checks for criminal convictions and possibly a search of open source data. The Role We are recruiting a Principal Testing Rigs & Labs Technician to provide senior level technical leadership within our experimental laboratories.This is a highly practical role, combining deep hands on expertise with day to day operational responsibility for testing rigs, laboratory equipment and experimental activities. You will be the principal technical authority for laboratory operations, ensuring experiments are built, commissioned and run safely, efficiently and to a high technical standard.Working closely with engineers, scientists and programme teams, you will translate experimental designs into robust, real world test setups, mentor technicians and apprentices, and help evolve laboratory capability to meet the needs of novel and emerging technologies. Key Accountabilities: Take day to day ownership of the safe and effective operation of testing rigs and laboratory facilities Act as the technical lead for experimental build, commissioning, operation and decommissioning activities Translate experimental designs into safe, buildable and high quality physical test setups Provide hands on leadership during complex or novel experimental work, troubleshooting issues and reducing technical risk Ensure laboratory assets, tooling and equipment are maintained, organised, calibrated and fit for purpose Lead risk assessment, safe systems of work and incident investigation within laboratory environments Generate and maintain technical procedures, experimental documentation and high quality test data records Support continuous improvement of laboratory processes, workflows, tooling and instrumentation Supervise, mentor and develop technicians and apprentices, setting high standards of professionalism and safety Engage with internal and external stakeholders to clarify requirements, provide expert guidance and manage expectations Deputise for the Testing Rigs and Labs Operations Manager when requiredSalary£57,117 (inclusive of Specialist Allowance) + excellent benefits including outstanding pensionProgrammeDepartmentTechnology DepartmentDisciplineSite LocationType of EmploymentFull-timeReference NumberREF4128H Qualifications Essential Requirements: A relevant technical qualification in a STEM discipline, or equivalent practical experience Extensive hands on experience in laboratory, prototype or experimental test environments Strong mechanical and/or electrical technical capability Experience delivering and operating complex experimental setups (e.g. pressure, vacuum, cryogenic or high voltage systems) Proven ability to take ownership of laboratory operations and experimental delivery Ability to interpret and produce engineering and technical documentation Experience supervising, mentoring or coaching technical staff or apprentices Strong organisational and problem solving skills, with the ability to work autonomously Desirable Requirements: Degree in engineering or a related discipline Knowledge of manufacturing machining (e.g. milling & turning) Experience working in R&D or novel technology environments Familiarity with laboratory compliance frameworks (e.g. COSHH, PUWER, LOLER or similar) Experience integrating instrumentation, control systems or data acquisition into experimental rigs Involvement in laboratory upgrades, facility fit out or new capability introduction Additional Information: This role requires regular hands on work in laboratory and workshop environments Additional InformationA full list of our benefits can be found hereUKAEA's mission is clean energy for all, and we welcome talented people from all backgrounds to help us achieve this goal. We are committed to equality, diversity, and inclusion and strive to ensure fair representation across our workforce. We particularly encourage applications from groups currently underrepresented in STEM, including women and individuals from diverse ethnic backgrounds, while ensuring all appointments are made on merit.UK Atomic Energy Authority is committed to being accessible. Please email if you have any questions or require help or adjustments to compete on a fair basis, for example, changes to the way we interview or share information. Please note that vacancies are generally advertised for 4 weeks but may close earlier if we receive a large number of applications. Get Fusion Job AlertsNew fusion energy jobs delivered to your inbox.LocationAbingdon, United Kingdom
May 04, 2026
Full time
# Principal Testing Rigs & Labs TechnicianMechanical Engineering Job DetailsLocationAbingdon, United KingdomEmployment TypeFull-timeSalary£57kLevelIndividual ContributorPosted# Principal Testing Rigs & Labs Technician Overview of ResponsibilitiesThe salary for this role is £57,117 (inclusive of a Specialist Allowance) . Onsite working is expected for 5 days each week. This role can be based at any of the following sites; Culham, Oxfordshire This role requires employees to complete an online Baseline Personnel Security Standard (BPSS), including The Disclosure & Barring Service (DBS) checks for criminal convictions and possibly a search of open source data. The Role We are recruiting a Principal Testing Rigs & Labs Technician to provide senior level technical leadership within our experimental laboratories.This is a highly practical role, combining deep hands on expertise with day to day operational responsibility for testing rigs, laboratory equipment and experimental activities. You will be the principal technical authority for laboratory operations, ensuring experiments are built, commissioned and run safely, efficiently and to a high technical standard.Working closely with engineers, scientists and programme teams, you will translate experimental designs into robust, real world test setups, mentor technicians and apprentices, and help evolve laboratory capability to meet the needs of novel and emerging technologies. Key Accountabilities: Take day to day ownership of the safe and effective operation of testing rigs and laboratory facilities Act as the technical lead for experimental build, commissioning, operation and decommissioning activities Translate experimental designs into safe, buildable and high quality physical test setups Provide hands on leadership during complex or novel experimental work, troubleshooting issues and reducing technical risk Ensure laboratory assets, tooling and equipment are maintained, organised, calibrated and fit for purpose Lead risk assessment, safe systems of work and incident investigation within laboratory environments Generate and maintain technical procedures, experimental documentation and high quality test data records Support continuous improvement of laboratory processes, workflows, tooling and instrumentation Supervise, mentor and develop technicians and apprentices, setting high standards of professionalism and safety Engage with internal and external stakeholders to clarify requirements, provide expert guidance and manage expectations Deputise for the Testing Rigs and Labs Operations Manager when requiredSalary£57,117 (inclusive of Specialist Allowance) + excellent benefits including outstanding pensionProgrammeDepartmentTechnology DepartmentDisciplineSite LocationType of EmploymentFull-timeReference NumberREF4128H Qualifications Essential Requirements: A relevant technical qualification in a STEM discipline, or equivalent practical experience Extensive hands on experience in laboratory, prototype or experimental test environments Strong mechanical and/or electrical technical capability Experience delivering and operating complex experimental setups (e.g. pressure, vacuum, cryogenic or high voltage systems) Proven ability to take ownership of laboratory operations and experimental delivery Ability to interpret and produce engineering and technical documentation Experience supervising, mentoring or coaching technical staff or apprentices Strong organisational and problem solving skills, with the ability to work autonomously Desirable Requirements: Degree in engineering or a related discipline Knowledge of manufacturing machining (e.g. milling & turning) Experience working in R&D or novel technology environments Familiarity with laboratory compliance frameworks (e.g. COSHH, PUWER, LOLER or similar) Experience integrating instrumentation, control systems or data acquisition into experimental rigs Involvement in laboratory upgrades, facility fit out or new capability introduction Additional Information: This role requires regular hands on work in laboratory and workshop environments Additional InformationA full list of our benefits can be found hereUKAEA's mission is clean energy for all, and we welcome talented people from all backgrounds to help us achieve this goal. We are committed to equality, diversity, and inclusion and strive to ensure fair representation across our workforce. We particularly encourage applications from groups currently underrepresented in STEM, including women and individuals from diverse ethnic backgrounds, while ensuring all appointments are made on merit.UK Atomic Energy Authority is committed to being accessible. Please email if you have any questions or require help or adjustments to compete on a fair basis, for example, changes to the way we interview or share information. Please note that vacancies are generally advertised for 4 weeks but may close earlier if we receive a large number of applications. Get Fusion Job AlertsNew fusion energy jobs delivered to your inbox.LocationAbingdon, United Kingdom
Job Title: Principal Mechanical Engineer Location: Rochester; Kent: Onsite Salary: Up to £65,000 depending on experience Who we are: Join BAE Systems and you'll be part of something bigger. As a valued member of our global colleague network, you'll bring your unique skills and perspectives to help pioneer progress and protect what matters most. You'll be trusted to play your part in delivering the advanced, technology-led defence, aerospace and security solutions of tomorrow, shaping a safer future, for all of us. From the depths of the ocean, to the far reaches of space, there's no limit to where a career at BAE Systems could take you. Job Description: The main duty of this role is to provide expert Mechanical Engineering support for the design and development of new innovative designs through to fault finding, diagnostics and salvage of existing products. As a Principal Mechanical Engineer, you will have the ability to lead innovation and provide technical direction to other Engineers/Technicians to develop ideas into a detailed scheme supported by calculations and reports to demonstrate compliance with requirements, which will include support to risk reduction and qualification testing as required. The expectation of a Principal Mechanical Engineer is to provide a high quality service to customers, on time and within budget with minimum management oversight, and be able to present the design detail directly to our high profile customers. Core duties: Using product knowledge and advanced engineering understanding, generate design concepts and solutions from first principals to meet project and customer requirements Prepare and present concise Mechanical Development Plans, Design Scheme Data Packs and other engineering detail for internal review and in a customer forum Taking a Design Authority role in checking and approving datasets (drawings/MBD) to ensure they correct to required standards, that they reflect design intent correctly, and that they adequately define parts for manufacture and inspection Work collaboratively across all engineering disciplines, liaising with technical specialists as required, and supporting Team Leads , Projects and Mechanical Functional Managers in preparing estimates for future design activities Complete Design Authority level checks on the work of other mechanical engineers, which will include designs, design data, hand calculations and technical reports Understand and provide governance on the adherence of Engineers and Technicians to departmental and company policies and procedures It may be required to travel and represent the company, providing presentations, carrying out product installation surveys etc ., away from the Rochester home base Essential Skills: Degree qualified in Mechanical Engineering, or related discipline, or an equivalent combination of other qualifications and experience. Meet the requirements of UK-SPEC at the Chartered Engineer Level Comprehensive experience of the full product design lifecycle, from concept through to production, within an engineering environment Experience in preparing technical datasets (drawings/MBD) and design review datasets Competence in the use of CAD tools to prepare design models, along with proficiency in the CREO CAD system and experience of Teamcenter, DOORS and JIRA, would be advantageous Experience in leading a mechanical, or cross-discipline, design team The Service & Industrialisation (S&I) Team: The team provides engineering support to the wider Service organisation, working closely with Hardware and Systems Engineering teams. The Mechanical Team comprises seven engineers ranging from Apprentice to Principal level. We support a wide portfolio of products across lifecycles exceeding 25 years, ensuring equipment remains safe, reliable, and operational throughout its service life. Our role focuses on keeping aircraft flying by resolving obsolescence issues, carrying out redesign and modification work, and developing repair solutions. This long-term support is critical to maintaining customer capability, meeting airworthiness requirements, and ensuring continued operational availability. Why BAE Systems? Here you'll build a career with purpose and limitless possibilities. With lifelong learning and meaningful work, this is a place where you can grow your career with confidence and be empowered to be your best. You'll be recognised for your contribution and enjoy rewards tailored to what's most important to you and your family, support for your financial and personal wellbeing, as well as a balanced lifestyle. In an environment embracing sustainable ways of working and with a strong sense of shared purpose, our supportive culture is a place you can feel you belong and proud of the difference you make. A place where everyone can thrive: We're committed to building an inclusive workplace where everyone feels valued and supported. We know that a diversity of backgrounds, perspectives and experiences strengthens our teams and is vital to the work we do. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date: 15th May 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible.
May 04, 2026
Full time
Job Title: Principal Mechanical Engineer Location: Rochester; Kent: Onsite Salary: Up to £65,000 depending on experience Who we are: Join BAE Systems and you'll be part of something bigger. As a valued member of our global colleague network, you'll bring your unique skills and perspectives to help pioneer progress and protect what matters most. You'll be trusted to play your part in delivering the advanced, technology-led defence, aerospace and security solutions of tomorrow, shaping a safer future, for all of us. From the depths of the ocean, to the far reaches of space, there's no limit to where a career at BAE Systems could take you. Job Description: The main duty of this role is to provide expert Mechanical Engineering support for the design and development of new innovative designs through to fault finding, diagnostics and salvage of existing products. As a Principal Mechanical Engineer, you will have the ability to lead innovation and provide technical direction to other Engineers/Technicians to develop ideas into a detailed scheme supported by calculations and reports to demonstrate compliance with requirements, which will include support to risk reduction and qualification testing as required. The expectation of a Principal Mechanical Engineer is to provide a high quality service to customers, on time and within budget with minimum management oversight, and be able to present the design detail directly to our high profile customers. Core duties: Using product knowledge and advanced engineering understanding, generate design concepts and solutions from first principals to meet project and customer requirements Prepare and present concise Mechanical Development Plans, Design Scheme Data Packs and other engineering detail for internal review and in a customer forum Taking a Design Authority role in checking and approving datasets (drawings/MBD) to ensure they correct to required standards, that they reflect design intent correctly, and that they adequately define parts for manufacture and inspection Work collaboratively across all engineering disciplines, liaising with technical specialists as required, and supporting Team Leads , Projects and Mechanical Functional Managers in preparing estimates for future design activities Complete Design Authority level checks on the work of other mechanical engineers, which will include designs, design data, hand calculations and technical reports Understand and provide governance on the adherence of Engineers and Technicians to departmental and company policies and procedures It may be required to travel and represent the company, providing presentations, carrying out product installation surveys etc ., away from the Rochester home base Essential Skills: Degree qualified in Mechanical Engineering, or related discipline, or an equivalent combination of other qualifications and experience. Meet the requirements of UK-SPEC at the Chartered Engineer Level Comprehensive experience of the full product design lifecycle, from concept through to production, within an engineering environment Experience in preparing technical datasets (drawings/MBD) and design review datasets Competence in the use of CAD tools to prepare design models, along with proficiency in the CREO CAD system and experience of Teamcenter, DOORS and JIRA, would be advantageous Experience in leading a mechanical, or cross-discipline, design team The Service & Industrialisation (S&I) Team: The team provides engineering support to the wider Service organisation, working closely with Hardware and Systems Engineering teams. The Mechanical Team comprises seven engineers ranging from Apprentice to Principal level. We support a wide portfolio of products across lifecycles exceeding 25 years, ensuring equipment remains safe, reliable, and operational throughout its service life. Our role focuses on keeping aircraft flying by resolving obsolescence issues, carrying out redesign and modification work, and developing repair solutions. This long-term support is critical to maintaining customer capability, meeting airworthiness requirements, and ensuring continued operational availability. Why BAE Systems? Here you'll build a career with purpose and limitless possibilities. With lifelong learning and meaningful work, this is a place where you can grow your career with confidence and be empowered to be your best. You'll be recognised for your contribution and enjoy rewards tailored to what's most important to you and your family, support for your financial and personal wellbeing, as well as a balanced lifestyle. In an environment embracing sustainable ways of working and with a strong sense of shared purpose, our supportive culture is a place you can feel you belong and proud of the difference you make. A place where everyone can thrive: We're committed to building an inclusive workplace where everyone feels valued and supported. We know that a diversity of backgrounds, perspectives and experiences strengthens our teams and is vital to the work we do. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date: 15th May 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible.
We are ambitious That's why we need people like you to help us. Our Design team is recruiting Are you an experienced Engineer with a passion for leading high-impact projects? If so, keep reading as we're seeking a skilled Design Manager to join our team in either Fareham or Brighton. As a Design Manager, you will take a leading role in managing and coordinating the design process on contractor led waste and water infrastructure projects. Working as part of the project delivery team, you will drive design from tender through to construction and handover, ensuring solutions are safe, buildable, compliant, cost effective and aligned with programme constraints. Projects may include water and wastewater treatment works, pumping stations, pipelines and rising mains, storage assets and complex MEICA installations delivered within live operational environments. Here are some of the things that you'll get involved in Lead and manage the contractor led design process from tender stage through detailed design and construction support. Coordinate multidisciplinary design teams including civil, structural, mechanical, electrical, ICA and process designers. Act as the primary interface between design, construction, commercial and planning teams, ensuring design solutions support safe and efficient delivery. Plan and manage design deliverables, information release schedules and design programmes to support construction sequencing and key milestones. Chair and lead design coordination and design review meetings, ensuring timely decision making and closure of actions. Ensure designs meet contractual requirements, client specifications, regulatory standards and water industry best practice. Drive buildability, operability and maintainability reviews, challenging design solutions where necessary to optimise delivery and whole life performance. Manage and control design development and design change, including assessment of impacts on cost, programme, risk and construction methodology. Coordinate design risk management, ensuring hazards are identified and mitigated through design in collaboration with construction and CDM teams. Work closely with the Principal Designer to ensure health and safety considerations are embedded within the design process and supported in Pre Construction Information. Support resolution of site based technical queries, RFIs and design related construction issues. Attend site regularly to engage with delivery teams and maintain alignment between design intent and construction. Produce progress updates and reports for project leadership and client teams. We would love to hear from you if you can demonstrate Experience delivering waste and water infrastructure projects, ideally within regulated water frameworks. Strong understanding of construction methodologies, temporary works, and sequencing in live operational environments. Experience managing external consultants and in-house designers to deliver coordinated, high-quality design outputs. Knowledge of CDM 2015 and the role design plays in managing construction and operational risk. An engineering qualification in Civil, Structural, Mechanical, Electrical, or Process Engineering (minimum HNC or equivalent NVQ Level 4). Professional membership (e.g. ICE, IMechE, CIHT, or equivalent) is desirable. Strong commercial awareness with the ability to understand design impacts on cost and programme. Excellent communication and stakeholder management skills. High level of IT literacy, including Microsoft Office and design coordination systems. A full UK driving licence. Our Company Every day we work smarter, greener and use our imaginations. Our purpose at Clancy is simple - we make life better for everyone's growing families. We play a vital role in providing fresh drinking water and power to millions of homes and businesses and so much more. We are one of the biggest family owned construction businesses in the UK and we care about our people, our clients and the environment. What Next You apply, and we respond within two weeks (we know how annoying it is not to hear anything back)! If you don't receive feedback within that timescale, please don't be afraid to chase us - one of our values is to do what we say we will do! In addition to helping you reach your career goals, a competitive salary, pension, healthcare and holiday allowance starting at 24-26 days per annum, we also offer perks including Clancy Xtras, our employee benefits programme with discounts for numerous well-known retailers such as Tesco, Sainsbury's, Currys PC World and Vue Cinemas, cycle to work scheme as well as an Employee Assistance Programme. Clancy is an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all our employees. If you require any reasonable adjustments to be made for you to attend an interview, please do let us know and we will be happy to accommodate. We are proud signatories of the Armed Forces Covenant and Disability Confident Committed.
May 04, 2026
Full time
We are ambitious That's why we need people like you to help us. Our Design team is recruiting Are you an experienced Engineer with a passion for leading high-impact projects? If so, keep reading as we're seeking a skilled Design Manager to join our team in either Fareham or Brighton. As a Design Manager, you will take a leading role in managing and coordinating the design process on contractor led waste and water infrastructure projects. Working as part of the project delivery team, you will drive design from tender through to construction and handover, ensuring solutions are safe, buildable, compliant, cost effective and aligned with programme constraints. Projects may include water and wastewater treatment works, pumping stations, pipelines and rising mains, storage assets and complex MEICA installations delivered within live operational environments. Here are some of the things that you'll get involved in Lead and manage the contractor led design process from tender stage through detailed design and construction support. Coordinate multidisciplinary design teams including civil, structural, mechanical, electrical, ICA and process designers. Act as the primary interface between design, construction, commercial and planning teams, ensuring design solutions support safe and efficient delivery. Plan and manage design deliverables, information release schedules and design programmes to support construction sequencing and key milestones. Chair and lead design coordination and design review meetings, ensuring timely decision making and closure of actions. Ensure designs meet contractual requirements, client specifications, regulatory standards and water industry best practice. Drive buildability, operability and maintainability reviews, challenging design solutions where necessary to optimise delivery and whole life performance. Manage and control design development and design change, including assessment of impacts on cost, programme, risk and construction methodology. Coordinate design risk management, ensuring hazards are identified and mitigated through design in collaboration with construction and CDM teams. Work closely with the Principal Designer to ensure health and safety considerations are embedded within the design process and supported in Pre Construction Information. Support resolution of site based technical queries, RFIs and design related construction issues. Attend site regularly to engage with delivery teams and maintain alignment between design intent and construction. Produce progress updates and reports for project leadership and client teams. We would love to hear from you if you can demonstrate Experience delivering waste and water infrastructure projects, ideally within regulated water frameworks. Strong understanding of construction methodologies, temporary works, and sequencing in live operational environments. Experience managing external consultants and in-house designers to deliver coordinated, high-quality design outputs. Knowledge of CDM 2015 and the role design plays in managing construction and operational risk. An engineering qualification in Civil, Structural, Mechanical, Electrical, or Process Engineering (minimum HNC or equivalent NVQ Level 4). Professional membership (e.g. ICE, IMechE, CIHT, or equivalent) is desirable. Strong commercial awareness with the ability to understand design impacts on cost and programme. Excellent communication and stakeholder management skills. High level of IT literacy, including Microsoft Office and design coordination systems. A full UK driving licence. Our Company Every day we work smarter, greener and use our imaginations. Our purpose at Clancy is simple - we make life better for everyone's growing families. We play a vital role in providing fresh drinking water and power to millions of homes and businesses and so much more. We are one of the biggest family owned construction businesses in the UK and we care about our people, our clients and the environment. What Next You apply, and we respond within two weeks (we know how annoying it is not to hear anything back)! If you don't receive feedback within that timescale, please don't be afraid to chase us - one of our values is to do what we say we will do! In addition to helping you reach your career goals, a competitive salary, pension, healthcare and holiday allowance starting at 24-26 days per annum, we also offer perks including Clancy Xtras, our employee benefits programme with discounts for numerous well-known retailers such as Tesco, Sainsbury's, Currys PC World and Vue Cinemas, cycle to work scheme as well as an Employee Assistance Programme. Clancy is an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all our employees. If you require any reasonable adjustments to be made for you to attend an interview, please do let us know and we will be happy to accommodate. We are proud signatories of the Armed Forces Covenant and Disability Confident Committed.
Job Title: Senior/Principal Platform Systems Mechanical Engineer Location: Barrow-In-Furness (Onsite) Salary: Competitive Who we are: Join BAE Systems and you'll be part of something bigger. As a valued member of our global colleague network, you'll bring your unique skills and perspectives to help pioneer progress and protect what matters most. You'll be trusted to play your part in delivering advanced, technology-led defence, aerospace and security solutions, shaping a safer future for all of us. From the depths of the ocean to the far reaches of space, there's no limit to where a career at BAE Systems could take you. What you will be doing: In this role, you will support the development and delivery of mechanical platform systems, ensuring robust design evidence is generated to support safe and effective engineering solutions. You will contribute to testing and commissioning activities, support issue resolution, and work closely with multidisciplinary teams to maintain design intent across complex submarine programmes. You will also mentor junior engineers, contribute to technical outputs, and engage with stakeholders to support successful programme delivery. Core duties: Develop and deliver design evidence to justify safe and effective engineering solutions, ensuring customer confidence in system designs Specify and support the build of prototypes, products, and systems for testing and validation activities Provide timely resolution of defects and issues, ensuring corrective actions are identified, tracked, and implemented Ensure engineering commitments are defined, reviewed, and delivered in line with programme requirements Support technical presentations and communications to engineering and management audiences, maintaining awareness of emerging technologies Author and contribute to technical reports, papers, and presentations to support engineering activities and knowledge sharing Mentor and support junior engineers, providing technical guidance and supporting professional development Apply mechanical engineering expertise across design, testing, commissioning, and analysis activities, utilising CAD tools and standard engineering software Essential Skills: Mechanical engineering knowledge across the full lifecycle (design, testing, commissioning, validation) Experience developing and justifying design evidence for engineering solutions Ability to support prototype development, testing, and validation activities Strong problem-solving skills with experience resolving defects and engineering issues Experience delivering engineering tasks in line with programme requirements and milestones Ability to produce and review technical documentation (reports, calculations, presentations) Experience using CAD tools and standard engineering/IT software Strong communication skills, with the ability to present technical information to varied audiences Mentoring or supporting junior engineers and contributing to team capability development The Mechanical Platform Systems Team: The Mechanical Platform Systems team plays a key role in supporting the planning and execution of testing and commissioning activities across complex submarine programmes. You will contribute to ensuring engineering activities are delivered safely and effectively while maintaining design intent. This role offers exposure to some of the most complex engineering projects within the Submarines business, alongside strong opportunities for career development. Relocation support may be available, subject to eligibility criteria. A place where everyone can thrive: We're committed to building an inclusive workplace where everyone feels valued and supported. We welcome applications from all suitably qualified people and encourage discussion of reasonable adjustments where needed. Please be aware that many roles at BAE Systems are subject to security and export control restrictions. Applicants must meet Baseline Personnel Security Standard, and many roles require higher levels of National Security Vetting, including 5-10 years continuous UK residency depending on the role . Why BAE Systems? Here you'll build a career with purpose and limitless possibilities. Lifelong learning, meaningful work, and a supportive culture enable you to grow with confidence . You'll be recognised for your contribution and supported with rewards that matter most to you. Closing Date: 24th May 2026 We reserve the right to close this vacancy early if we receive sufficient applications. If you are interested, please apply as early as possible.
May 03, 2026
Full time
Job Title: Senior/Principal Platform Systems Mechanical Engineer Location: Barrow-In-Furness (Onsite) Salary: Competitive Who we are: Join BAE Systems and you'll be part of something bigger. As a valued member of our global colleague network, you'll bring your unique skills and perspectives to help pioneer progress and protect what matters most. You'll be trusted to play your part in delivering advanced, technology-led defence, aerospace and security solutions, shaping a safer future for all of us. From the depths of the ocean to the far reaches of space, there's no limit to where a career at BAE Systems could take you. What you will be doing: In this role, you will support the development and delivery of mechanical platform systems, ensuring robust design evidence is generated to support safe and effective engineering solutions. You will contribute to testing and commissioning activities, support issue resolution, and work closely with multidisciplinary teams to maintain design intent across complex submarine programmes. You will also mentor junior engineers, contribute to technical outputs, and engage with stakeholders to support successful programme delivery. Core duties: Develop and deliver design evidence to justify safe and effective engineering solutions, ensuring customer confidence in system designs Specify and support the build of prototypes, products, and systems for testing and validation activities Provide timely resolution of defects and issues, ensuring corrective actions are identified, tracked, and implemented Ensure engineering commitments are defined, reviewed, and delivered in line with programme requirements Support technical presentations and communications to engineering and management audiences, maintaining awareness of emerging technologies Author and contribute to technical reports, papers, and presentations to support engineering activities and knowledge sharing Mentor and support junior engineers, providing technical guidance and supporting professional development Apply mechanical engineering expertise across design, testing, commissioning, and analysis activities, utilising CAD tools and standard engineering software Essential Skills: Mechanical engineering knowledge across the full lifecycle (design, testing, commissioning, validation) Experience developing and justifying design evidence for engineering solutions Ability to support prototype development, testing, and validation activities Strong problem-solving skills with experience resolving defects and engineering issues Experience delivering engineering tasks in line with programme requirements and milestones Ability to produce and review technical documentation (reports, calculations, presentations) Experience using CAD tools and standard engineering/IT software Strong communication skills, with the ability to present technical information to varied audiences Mentoring or supporting junior engineers and contributing to team capability development The Mechanical Platform Systems Team: The Mechanical Platform Systems team plays a key role in supporting the planning and execution of testing and commissioning activities across complex submarine programmes. You will contribute to ensuring engineering activities are delivered safely and effectively while maintaining design intent. This role offers exposure to some of the most complex engineering projects within the Submarines business, alongside strong opportunities for career development. Relocation support may be available, subject to eligibility criteria. A place where everyone can thrive: We're committed to building an inclusive workplace where everyone feels valued and supported. We welcome applications from all suitably qualified people and encourage discussion of reasonable adjustments where needed. Please be aware that many roles at BAE Systems are subject to security and export control restrictions. Applicants must meet Baseline Personnel Security Standard, and many roles require higher levels of National Security Vetting, including 5-10 years continuous UK residency depending on the role . Why BAE Systems? Here you'll build a career with purpose and limitless possibilities. Lifelong learning, meaningful work, and a supportive culture enable you to grow with confidence . You'll be recognised for your contribution and supported with rewards that matter most to you. Closing Date: 24th May 2026 We reserve the right to close this vacancy early if we receive sufficient applications. If you are interested, please apply as early as possible.
Job Title: Principal Mechanical Engineer Location: Rochester; Kent: Onsite Salary: Up to £65,000 depending on experience Who we are: Join BAE Systems and you'll be part of something bigger. As a valued member of our global colleague network, you'll bring your unique skills and perspectives to help pioneer progress and protect what matters most. You'll be trusted to play your part in delivering the advanced, technology-led defence, aerospace and security solutions of tomorrow, shaping a safer future, for all of us. From the depths of the ocean, to the far reaches of space, there's no limit to where a career at BAE Systems could take you. Job Description: The main duty of this role is to provide expert Mechanical Engineering support for the design and development of new innovative designs through to fault finding, diagnostics and salvage of existing products. As a Principal Mechanical Engineer, you will have the ability to lead innovation and provide technical direction to other Engineers/Technicians to develop ideas into a detailed scheme supported by calculations and reports to demonstrate compliance with requirements, which will include support to risk reduction and qualification testing as required. The expectation of a Principal Mechanical Engineer is to provide a high quality service to customers, on time and within budget with minimum management oversight, and be able to present the design detail directly to our high profile customers. Core duties: Using product knowledge and advanced engineering understanding, generate design concepts and solutions from first principals to meet project and customer requirements Prepare and present concise Mechanical Development Plans, Design Scheme Data Packs and other engineering detail for internal review and in a customer forum Taking a Design Authority role in checking and approving datasets (drawings/MBD) to ensure they correct to required standards, that they reflect design intent correctly, and that they adequately define parts for manufacture and inspection Work collaboratively across all engineering disciplines, liaising with technical specialists as required, and supporting Team Leads , Projects and Mechanical Functional Managers in preparing estimates for future design activities Complete Design Authority level checks on the work of other mechanical engineers, which will include designs, design data, hand calculations and technical reports Understand and provide governance on the adherence of Engineers and Technicians to departmental and company policies and procedures It may be required to travel and represent the company, providing presentations, carrying out product installation surveys etc ., away from the Rochester home base Essential Skills: Degree qualified in Mechanical Engineering, or related discipline, or an equivalent combination of other qualifications and experience. Meet the requirements of UK-SPEC at the Chartered Engineer Level Comprehensive experience of the full product design lifecycle, from concept through to production, within an engineering environment Experience in preparing technical datasets (drawings/MBD) and design review datasets Competence in the use of CAD tools to prepare design models, along with proficiency in the CREO CAD system and experience of Teamcenter, DOORS and JIRA, would be advantageous Experience in leading a mechanical, or cross-discipline, design team The Service & Industrialisation (S&I) Team: The team provides engineering support to the wider Service organisation, working closely with Hardware and Systems Engineering teams. The Mechanical Team comprises seven engineers ranging from Apprentice to Principal level. We support a wide portfolio of products across lifecycles exceeding 25 years, ensuring equipment remains safe, reliable, and operational throughout its service life. Our role focuses on keeping aircraft flying by resolving obsolescence issues, carrying out redesign and modification work, and developing repair solutions. This long-term support is critical to maintaining customer capability, meeting airworthiness requirements, and ensuring continued operational availability. Why BAE Systems? Here you'll build a career with purpose and limitless possibilities. With lifelong learning and meaningful work, this is a place where you can grow your career with confidence and be empowered to be your best. You'll be recognised for your contribution and enjoy rewards tailored to what's most important to you and your family, support for your financial and personal wellbeing, as well as a balanced lifestyle. In an environment embracing sustainable ways of working and with a strong sense of shared purpose, our supportive culture is a place you can feel you belong and proud of the difference you make. A place where everyone can thrive: We're committed to building an inclusive workplace where everyone feels valued and supported. We know that a diversity of backgrounds, perspectives and experiences strengthens our teams and is vital to the work we do. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date: 15th May 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible.
May 03, 2026
Full time
Job Title: Principal Mechanical Engineer Location: Rochester; Kent: Onsite Salary: Up to £65,000 depending on experience Who we are: Join BAE Systems and you'll be part of something bigger. As a valued member of our global colleague network, you'll bring your unique skills and perspectives to help pioneer progress and protect what matters most. You'll be trusted to play your part in delivering the advanced, technology-led defence, aerospace and security solutions of tomorrow, shaping a safer future, for all of us. From the depths of the ocean, to the far reaches of space, there's no limit to where a career at BAE Systems could take you. Job Description: The main duty of this role is to provide expert Mechanical Engineering support for the design and development of new innovative designs through to fault finding, diagnostics and salvage of existing products. As a Principal Mechanical Engineer, you will have the ability to lead innovation and provide technical direction to other Engineers/Technicians to develop ideas into a detailed scheme supported by calculations and reports to demonstrate compliance with requirements, which will include support to risk reduction and qualification testing as required. The expectation of a Principal Mechanical Engineer is to provide a high quality service to customers, on time and within budget with minimum management oversight, and be able to present the design detail directly to our high profile customers. Core duties: Using product knowledge and advanced engineering understanding, generate design concepts and solutions from first principals to meet project and customer requirements Prepare and present concise Mechanical Development Plans, Design Scheme Data Packs and other engineering detail for internal review and in a customer forum Taking a Design Authority role in checking and approving datasets (drawings/MBD) to ensure they correct to required standards, that they reflect design intent correctly, and that they adequately define parts for manufacture and inspection Work collaboratively across all engineering disciplines, liaising with technical specialists as required, and supporting Team Leads , Projects and Mechanical Functional Managers in preparing estimates for future design activities Complete Design Authority level checks on the work of other mechanical engineers, which will include designs, design data, hand calculations and technical reports Understand and provide governance on the adherence of Engineers and Technicians to departmental and company policies and procedures It may be required to travel and represent the company, providing presentations, carrying out product installation surveys etc ., away from the Rochester home base Essential Skills: Degree qualified in Mechanical Engineering, or related discipline, or an equivalent combination of other qualifications and experience. Meet the requirements of UK-SPEC at the Chartered Engineer Level Comprehensive experience of the full product design lifecycle, from concept through to production, within an engineering environment Experience in preparing technical datasets (drawings/MBD) and design review datasets Competence in the use of CAD tools to prepare design models, along with proficiency in the CREO CAD system and experience of Teamcenter, DOORS and JIRA, would be advantageous Experience in leading a mechanical, or cross-discipline, design team The Service & Industrialisation (S&I) Team: The team provides engineering support to the wider Service organisation, working closely with Hardware and Systems Engineering teams. The Mechanical Team comprises seven engineers ranging from Apprentice to Principal level. We support a wide portfolio of products across lifecycles exceeding 25 years, ensuring equipment remains safe, reliable, and operational throughout its service life. Our role focuses on keeping aircraft flying by resolving obsolescence issues, carrying out redesign and modification work, and developing repair solutions. This long-term support is critical to maintaining customer capability, meeting airworthiness requirements, and ensuring continued operational availability. Why BAE Systems? Here you'll build a career with purpose and limitless possibilities. With lifelong learning and meaningful work, this is a place where you can grow your career with confidence and be empowered to be your best. You'll be recognised for your contribution and enjoy rewards tailored to what's most important to you and your family, support for your financial and personal wellbeing, as well as a balanced lifestyle. In an environment embracing sustainable ways of working and with a strong sense of shared purpose, our supportive culture is a place you can feel you belong and proud of the difference you make. A place where everyone can thrive: We're committed to building an inclusive workplace where everyone feels valued and supported. We know that a diversity of backgrounds, perspectives and experiences strengthens our teams and is vital to the work we do. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date: 15th May 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible.
Job Title: Senior/Principal Platform Systems Mechanical Engineer Location: Barrow-In-Furness (Onsite) Salary: Competitive Who we are: Join BAE Systems and you'll be part of something bigger. As a valued member of our global colleague network, you'll bring your unique skills and perspectives to help pioneer progress and protect what matters most. You'll be trusted to play your part in delivering advanced, technology-led defence, aerospace and security solutions, shaping a safer future for all of us. From the depths of the ocean to the far reaches of space, there's no limit to where a career at BAE Systems could take you. What you will be doing: In this role, you will support the development and delivery of mechanical platform systems, ensuring robust design evidence is generated to support safe and effective engineering solutions. You will contribute to testing and commissioning activities, support issue resolution, and work closely with multidisciplinary teams to maintain design intent across complex submarine programmes. You will also mentor junior engineers, contribute to technical outputs, and engage with stakeholders to support successful programme delivery. Core duties: Develop and deliver design evidence to justify safe and effective engineering solutions, ensuring customer confidence in system designs Specify and support the build of prototypes, products, and systems for testing and validation activities Provide timely resolution of defects and issues, ensuring corrective actions are identified, tracked, and implemented Ensure engineering commitments are defined, reviewed, and delivered in line with programme requirements Support technical presentations and communications to engineering and management audiences, maintaining awareness of emerging technologies Author and contribute to technical reports, papers, and presentations to support engineering activities and knowledge sharing Mentor and support junior engineers, providing technical guidance and supporting professional development Apply mechanical engineering expertise across design, testing, commissioning, and analysis activities, utilising CAD tools and standard engineering software Essential Skills: Mechanical engineering knowledge across the full lifecycle (design, testing, commissioning, validation) Experience developing and justifying design evidence for engineering solutions Ability to support prototype development, testing, and validation activities Strong problem-solving skills with experience resolving defects and engineering issues Experience delivering engineering tasks in line with programme requirements and milestones Ability to produce and review technical documentation (reports, calculations, presentations) Experience using CAD tools and standard engineering/IT software Strong communication skills, with the ability to present technical information to varied audiences Mentoring or supporting junior engineers and contributing to team capability development The Mechanical Platform Systems Team: The Mechanical Platform Systems team plays a key role in supporting the planning and execution of testing and commissioning activities across complex submarine programmes. You will contribute to ensuring engineering activities are delivered safely and effectively while maintaining design intent. This role offers exposure to some of the most complex engineering projects within the Submarines business, alongside strong opportunities for career development. Relocation support may be available, subject to eligibility criteria. A place where everyone can thrive: We're committed to building an inclusive workplace where everyone feels valued and supported. We welcome applications from all suitably qualified people and encourage discussion of reasonable adjustments where needed. Please be aware that many roles at BAE Systems are subject to security and export control restrictions. Applicants must meet Baseline Personnel Security Standard, and many roles require higher levels of National Security Vetting, including 5-10 years continuous UK residency depending on the role . Why BAE Systems? Here you'll build a career with purpose and limitless possibilities. Lifelong learning, meaningful work, and a supportive culture enable you to grow with confidence . You'll be recognised for your contribution and supported with rewards that matter most to you. Closing Date: 24th May 2026 We reserve the right to close this vacancy early if we receive sufficient applications. If you are interested, please apply as early as possible.
May 03, 2026
Full time
Job Title: Senior/Principal Platform Systems Mechanical Engineer Location: Barrow-In-Furness (Onsite) Salary: Competitive Who we are: Join BAE Systems and you'll be part of something bigger. As a valued member of our global colleague network, you'll bring your unique skills and perspectives to help pioneer progress and protect what matters most. You'll be trusted to play your part in delivering advanced, technology-led defence, aerospace and security solutions, shaping a safer future for all of us. From the depths of the ocean to the far reaches of space, there's no limit to where a career at BAE Systems could take you. What you will be doing: In this role, you will support the development and delivery of mechanical platform systems, ensuring robust design evidence is generated to support safe and effective engineering solutions. You will contribute to testing and commissioning activities, support issue resolution, and work closely with multidisciplinary teams to maintain design intent across complex submarine programmes. You will also mentor junior engineers, contribute to technical outputs, and engage with stakeholders to support successful programme delivery. Core duties: Develop and deliver design evidence to justify safe and effective engineering solutions, ensuring customer confidence in system designs Specify and support the build of prototypes, products, and systems for testing and validation activities Provide timely resolution of defects and issues, ensuring corrective actions are identified, tracked, and implemented Ensure engineering commitments are defined, reviewed, and delivered in line with programme requirements Support technical presentations and communications to engineering and management audiences, maintaining awareness of emerging technologies Author and contribute to technical reports, papers, and presentations to support engineering activities and knowledge sharing Mentor and support junior engineers, providing technical guidance and supporting professional development Apply mechanical engineering expertise across design, testing, commissioning, and analysis activities, utilising CAD tools and standard engineering software Essential Skills: Mechanical engineering knowledge across the full lifecycle (design, testing, commissioning, validation) Experience developing and justifying design evidence for engineering solutions Ability to support prototype development, testing, and validation activities Strong problem-solving skills with experience resolving defects and engineering issues Experience delivering engineering tasks in line with programme requirements and milestones Ability to produce and review technical documentation (reports, calculations, presentations) Experience using CAD tools and standard engineering/IT software Strong communication skills, with the ability to present technical information to varied audiences Mentoring or supporting junior engineers and contributing to team capability development The Mechanical Platform Systems Team: The Mechanical Platform Systems team plays a key role in supporting the planning and execution of testing and commissioning activities across complex submarine programmes. You will contribute to ensuring engineering activities are delivered safely and effectively while maintaining design intent. This role offers exposure to some of the most complex engineering projects within the Submarines business, alongside strong opportunities for career development. Relocation support may be available, subject to eligibility criteria. A place where everyone can thrive: We're committed to building an inclusive workplace where everyone feels valued and supported. We welcome applications from all suitably qualified people and encourage discussion of reasonable adjustments where needed. Please be aware that many roles at BAE Systems are subject to security and export control restrictions. Applicants must meet Baseline Personnel Security Standard, and many roles require higher levels of National Security Vetting, including 5-10 years continuous UK residency depending on the role . Why BAE Systems? Here you'll build a career with purpose and limitless possibilities. Lifelong learning, meaningful work, and a supportive culture enable you to grow with confidence . You'll be recognised for your contribution and supported with rewards that matter most to you. Closing Date: 24th May 2026 We reserve the right to close this vacancy early if we receive sufficient applications. If you are interested, please apply as early as possible.
Job Title: Principal Mechanical Engineer Location: Rochester; Kent: Onsite Salary: Up to £65,000 depending on experience Who we are: Join BAE Systems and you'll be part of something bigger. As a valued member of our global colleague network, you'll bring your unique skills and perspectives to help pioneer progress and protect what matters most. You'll be trusted to play your part in delivering the advanced, technology-led defence, aerospace and security solutions of tomorrow, shaping a safer future, for all of us. From the depths of the ocean, to the far reaches of space, there's no limit to where a career at BAE Systems could take you. Job Description: The main duty of this role is to provide expert Mechanical Engineering support for the design and development of new innovative designs through to fault finding, diagnostics and salvage of existing products. As a Principal Mechanical Engineer, you will have the ability to lead innovation and provide technical direction to other Engineers/Technicians to develop ideas into a detailed scheme supported by calculations and reports to demonstrate compliance with requirements, which will include support to risk reduction and qualification testing as required. The expectation of a Principal Mechanical Engineer is to provide a high quality service to customers, on time and within budget with minimum management oversight, and be able to present the design detail directly to our high profile customers. Core duties: Using product knowledge and advanced engineering understanding, generate design concepts and solutions from first principals to meet project and customer requirements Prepare and present concise Mechanical Development Plans, Design Scheme Data Packs and other engineering detail for internal review and in a customer forum Taking a Design Authority role in checking and approving datasets (drawings/MBD) to ensure they correct to required standards, that they reflect design intent correctly, and that they adequately define parts for manufacture and inspection Work collaboratively across all engineering disciplines, liaising with technical specialists as required, and supporting Team Leads , Projects and Mechanical Functional Managers in preparing estimates for future design activities Complete Design Authority level checks on the work of other mechanical engineers, which will include designs, design data, hand calculations and technical reports Understand and provide governance on the adherence of Engineers and Technicians to departmental and company policies and procedures It may be required to travel and represent the company, providing presentations, carrying out product installation surveys etc ., away from the Rochester home base Essential Skills: Degree qualified in Mechanical Engineering, or related discipline, or an equivalent combination of other qualifications and experience. Meet the requirements of UK-SPEC at the Chartered Engineer Level Comprehensive experience of the full product design lifecycle, from concept through to production, within an engineering environment Experience in preparing technical datasets (drawings/MBD) and design review datasets Competence in the use of CAD tools to prepare design models, along with proficiency in the CREO CAD system and experience of Teamcenter, DOORS and JIRA, would be advantageous Experience in leading a mechanical, or cross-discipline, design team The Service & Industrialisation (S&I) Team: The team provides engineering support to the wider Service organisation, working closely with Hardware and Systems Engineering teams. The Mechanical Team comprises seven engineers ranging from Apprentice to Principal level. We support a wide portfolio of products across lifecycles exceeding 25 years, ensuring equipment remains safe, reliable, and operational throughout its service life. Our role focuses on keeping aircraft flying by resolving obsolescence issues, carrying out redesign and modification work, and developing repair solutions. This long-term support is critical to maintaining customer capability, meeting airworthiness requirements, and ensuring continued operational availability. Why BAE Systems? Here you'll build a career with purpose and limitless possibilities. With lifelong learning and meaningful work, this is a place where you can grow your career with confidence and be empowered to be your best. You'll be recognised for your contribution and enjoy rewards tailored to what's most important to you and your family, support for your financial and personal wellbeing, as well as a balanced lifestyle. In an environment embracing sustainable ways of working and with a strong sense of shared purpose, our supportive culture is a place you can feel you belong and proud of the difference you make. A place where everyone can thrive: We're committed to building an inclusive workplace where everyone feels valued and supported. We know that a diversity of backgrounds, perspectives and experiences strengthens our teams and is vital to the work we do. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date: 15th May 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible.
May 03, 2026
Full time
Job Title: Principal Mechanical Engineer Location: Rochester; Kent: Onsite Salary: Up to £65,000 depending on experience Who we are: Join BAE Systems and you'll be part of something bigger. As a valued member of our global colleague network, you'll bring your unique skills and perspectives to help pioneer progress and protect what matters most. You'll be trusted to play your part in delivering the advanced, technology-led defence, aerospace and security solutions of tomorrow, shaping a safer future, for all of us. From the depths of the ocean, to the far reaches of space, there's no limit to where a career at BAE Systems could take you. Job Description: The main duty of this role is to provide expert Mechanical Engineering support for the design and development of new innovative designs through to fault finding, diagnostics and salvage of existing products. As a Principal Mechanical Engineer, you will have the ability to lead innovation and provide technical direction to other Engineers/Technicians to develop ideas into a detailed scheme supported by calculations and reports to demonstrate compliance with requirements, which will include support to risk reduction and qualification testing as required. The expectation of a Principal Mechanical Engineer is to provide a high quality service to customers, on time and within budget with minimum management oversight, and be able to present the design detail directly to our high profile customers. Core duties: Using product knowledge and advanced engineering understanding, generate design concepts and solutions from first principals to meet project and customer requirements Prepare and present concise Mechanical Development Plans, Design Scheme Data Packs and other engineering detail for internal review and in a customer forum Taking a Design Authority role in checking and approving datasets (drawings/MBD) to ensure they correct to required standards, that they reflect design intent correctly, and that they adequately define parts for manufacture and inspection Work collaboratively across all engineering disciplines, liaising with technical specialists as required, and supporting Team Leads , Projects and Mechanical Functional Managers in preparing estimates for future design activities Complete Design Authority level checks on the work of other mechanical engineers, which will include designs, design data, hand calculations and technical reports Understand and provide governance on the adherence of Engineers and Technicians to departmental and company policies and procedures It may be required to travel and represent the company, providing presentations, carrying out product installation surveys etc ., away from the Rochester home base Essential Skills: Degree qualified in Mechanical Engineering, or related discipline, or an equivalent combination of other qualifications and experience. Meet the requirements of UK-SPEC at the Chartered Engineer Level Comprehensive experience of the full product design lifecycle, from concept through to production, within an engineering environment Experience in preparing technical datasets (drawings/MBD) and design review datasets Competence in the use of CAD tools to prepare design models, along with proficiency in the CREO CAD system and experience of Teamcenter, DOORS and JIRA, would be advantageous Experience in leading a mechanical, or cross-discipline, design team The Service & Industrialisation (S&I) Team: The team provides engineering support to the wider Service organisation, working closely with Hardware and Systems Engineering teams. The Mechanical Team comprises seven engineers ranging from Apprentice to Principal level. We support a wide portfolio of products across lifecycles exceeding 25 years, ensuring equipment remains safe, reliable, and operational throughout its service life. Our role focuses on keeping aircraft flying by resolving obsolescence issues, carrying out redesign and modification work, and developing repair solutions. This long-term support is critical to maintaining customer capability, meeting airworthiness requirements, and ensuring continued operational availability. Why BAE Systems? Here you'll build a career with purpose and limitless possibilities. With lifelong learning and meaningful work, this is a place where you can grow your career with confidence and be empowered to be your best. You'll be recognised for your contribution and enjoy rewards tailored to what's most important to you and your family, support for your financial and personal wellbeing, as well as a balanced lifestyle. In an environment embracing sustainable ways of working and with a strong sense of shared purpose, our supportive culture is a place you can feel you belong and proud of the difference you make. A place where everyone can thrive: We're committed to building an inclusive workplace where everyone feels valued and supported. We know that a diversity of backgrounds, perspectives and experiences strengthens our teams and is vital to the work we do. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date: 15th May 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible.
Job Title: Principal Mechanical Engineer Location: Rochester; Kent: Onsite Salary: Up to £65,000 depending on experience Who we are: Join BAE Systems and you'll be part of something bigger. As a valued member of our global colleague network, you'll bring your unique skills and perspectives to help pioneer progress and protect what matters most. You'll be trusted to play your part in delivering the advanced, technology-led defence, aerospace and security solutions of tomorrow, shaping a safer future, for all of us. From the depths of the ocean, to the far reaches of space, there's no limit to where a career at BAE Systems could take you. Job Description: The main duty of this role is to provide expert Mechanical Engineering support for the design and development of new innovative designs through to fault finding, diagnostics and salvage of existing products. As a Principal Mechanical Engineer, you will have the ability to lead innovation and provide technical direction to other Engineers/Technicians to develop ideas into a detailed scheme supported by calculations and reports to demonstrate compliance with requirements, which will include support to risk reduction and qualification testing as required. The expectation of a Principal Mechanical Engineer is to provide a high quality service to customers, on time and within budget with minimum management oversight, and be able to present the design detail directly to our high profile customers. Core duties: Using product knowledge and advanced engineering understanding, generate design concepts and solutions from first principals to meet project and customer requirements Prepare and present concise Mechanical Development Plans, Design Scheme Data Packs and other engineering detail for internal review and in a customer forum Taking a Design Authority role in checking and approving datasets (drawings/MBD) to ensure they correct to required standards, that they reflect design intent correctly, and that they adequately define parts for manufacture and inspection Work collaboratively across all engineering disciplines, liaising with technical specialists as required, and supporting Team Leads , Projects and Mechanical Functional Managers in preparing estimates for future design activities Complete Design Authority level checks on the work of other mechanical engineers, which will include designs, design data, hand calculations and technical reports Understand and provide governance on the adherence of Engineers and Technicians to departmental and company policies and procedures It may be required to travel and represent the company, providing presentations, carrying out product installation surveys etc ., away from the Rochester home base Essential Skills: Degree qualified in Mechanical Engineering, or related discipline, or an equivalent combination of other qualifications and experience. Meet the requirements of UK-SPEC at the Chartered Engineer Level Comprehensive experience of the full product design lifecycle, from concept through to production, within an engineering environment Experience in preparing technical datasets (drawings/MBD) and design review datasets Competence in the use of CAD tools to prepare design models, along with proficiency in the CREO CAD system and experience of Teamcenter, DOORS and JIRA, would be advantageous Experience in leading a mechanical, or cross-discipline, design team The Service & Industrialisation (S&I) Team: The team provides engineering support to the wider Service organisation, working closely with Hardware and Systems Engineering teams. The Mechanical Team comprises seven engineers ranging from Apprentice to Principal level. We support a wide portfolio of products across lifecycles exceeding 25 years, ensuring equipment remains safe, reliable, and operational throughout its service life. Our role focuses on keeping aircraft flying by resolving obsolescence issues, carrying out redesign and modification work, and developing repair solutions. This long-term support is critical to maintaining customer capability, meeting airworthiness requirements, and ensuring continued operational availability. Why BAE Systems? Here you'll build a career with purpose and limitless possibilities. With lifelong learning and meaningful work, this is a place where you can grow your career with confidence and be empowered to be your best. You'll be recognised for your contribution and enjoy rewards tailored to what's most important to you and your family, support for your financial and personal wellbeing, as well as a balanced lifestyle. In an environment embracing sustainable ways of working and with a strong sense of shared purpose, our supportive culture is a place you can feel you belong and proud of the difference you make. A place where everyone can thrive: We're committed to building an inclusive workplace where everyone feels valued and supported. We know that a diversity of backgrounds, perspectives and experiences strengthens our teams and is vital to the work we do. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date: 15th May 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible.
May 03, 2026
Full time
Job Title: Principal Mechanical Engineer Location: Rochester; Kent: Onsite Salary: Up to £65,000 depending on experience Who we are: Join BAE Systems and you'll be part of something bigger. As a valued member of our global colleague network, you'll bring your unique skills and perspectives to help pioneer progress and protect what matters most. You'll be trusted to play your part in delivering the advanced, technology-led defence, aerospace and security solutions of tomorrow, shaping a safer future, for all of us. From the depths of the ocean, to the far reaches of space, there's no limit to where a career at BAE Systems could take you. Job Description: The main duty of this role is to provide expert Mechanical Engineering support for the design and development of new innovative designs through to fault finding, diagnostics and salvage of existing products. As a Principal Mechanical Engineer, you will have the ability to lead innovation and provide technical direction to other Engineers/Technicians to develop ideas into a detailed scheme supported by calculations and reports to demonstrate compliance with requirements, which will include support to risk reduction and qualification testing as required. The expectation of a Principal Mechanical Engineer is to provide a high quality service to customers, on time and within budget with minimum management oversight, and be able to present the design detail directly to our high profile customers. Core duties: Using product knowledge and advanced engineering understanding, generate design concepts and solutions from first principals to meet project and customer requirements Prepare and present concise Mechanical Development Plans, Design Scheme Data Packs and other engineering detail for internal review and in a customer forum Taking a Design Authority role in checking and approving datasets (drawings/MBD) to ensure they correct to required standards, that they reflect design intent correctly, and that they adequately define parts for manufacture and inspection Work collaboratively across all engineering disciplines, liaising with technical specialists as required, and supporting Team Leads , Projects and Mechanical Functional Managers in preparing estimates for future design activities Complete Design Authority level checks on the work of other mechanical engineers, which will include designs, design data, hand calculations and technical reports Understand and provide governance on the adherence of Engineers and Technicians to departmental and company policies and procedures It may be required to travel and represent the company, providing presentations, carrying out product installation surveys etc ., away from the Rochester home base Essential Skills: Degree qualified in Mechanical Engineering, or related discipline, or an equivalent combination of other qualifications and experience. Meet the requirements of UK-SPEC at the Chartered Engineer Level Comprehensive experience of the full product design lifecycle, from concept through to production, within an engineering environment Experience in preparing technical datasets (drawings/MBD) and design review datasets Competence in the use of CAD tools to prepare design models, along with proficiency in the CREO CAD system and experience of Teamcenter, DOORS and JIRA, would be advantageous Experience in leading a mechanical, or cross-discipline, design team The Service & Industrialisation (S&I) Team: The team provides engineering support to the wider Service organisation, working closely with Hardware and Systems Engineering teams. The Mechanical Team comprises seven engineers ranging from Apprentice to Principal level. We support a wide portfolio of products across lifecycles exceeding 25 years, ensuring equipment remains safe, reliable, and operational throughout its service life. Our role focuses on keeping aircraft flying by resolving obsolescence issues, carrying out redesign and modification work, and developing repair solutions. This long-term support is critical to maintaining customer capability, meeting airworthiness requirements, and ensuring continued operational availability. Why BAE Systems? Here you'll build a career with purpose and limitless possibilities. With lifelong learning and meaningful work, this is a place where you can grow your career with confidence and be empowered to be your best. You'll be recognised for your contribution and enjoy rewards tailored to what's most important to you and your family, support for your financial and personal wellbeing, as well as a balanced lifestyle. In an environment embracing sustainable ways of working and with a strong sense of shared purpose, our supportive culture is a place you can feel you belong and proud of the difference you make. A place where everyone can thrive: We're committed to building an inclusive workplace where everyone feels valued and supported. We know that a diversity of backgrounds, perspectives and experiences strengthens our teams and is vital to the work we do. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date: 15th May 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible.
Job Title: Senior/Principal Platform Systems Mechanical Engineer Location: Barrow-In-Furness (Onsite) Salary: Competitive Who we are: Join BAE Systems and you'll be part of something bigger. As a valued member of our global colleague network, you'll bring your unique skills and perspectives to help pioneer progress and protect what matters most. You'll be trusted to play your part in delivering advanced, technology-led defence, aerospace and security solutions, shaping a safer future for all of us. From the depths of the ocean to the far reaches of space, there's no limit to where a career at BAE Systems could take you. What you will be doing: In this role, you will support the development and delivery of mechanical platform systems, ensuring robust design evidence is generated to support safe and effective engineering solutions. You will contribute to testing and commissioning activities, support issue resolution, and work closely with multidisciplinary teams to maintain design intent across complex submarine programmes. You will also mentor junior engineers, contribute to technical outputs, and engage with stakeholders to support successful programme delivery. Core duties: Develop and deliver design evidence to justify safe and effective engineering solutions, ensuring customer confidence in system designs Specify and support the build of prototypes, products, and systems for testing and validation activities Provide timely resolution of defects and issues, ensuring corrective actions are identified, tracked, and implemented Ensure engineering commitments are defined, reviewed, and delivered in line with programme requirements Support technical presentations and communications to engineering and management audiences, maintaining awareness of emerging technologies Author and contribute to technical reports, papers, and presentations to support engineering activities and knowledge sharing Mentor and support junior engineers, providing technical guidance and supporting professional development Apply mechanical engineering expertise across design, testing, commissioning, and analysis activities, utilising CAD tools and standard engineering software Essential Skills: Mechanical engineering knowledge across the full lifecycle (design, testing, commissioning, validation) Experience developing and justifying design evidence for engineering solutions Ability to support prototype development, testing, and validation activities Strong problem-solving skills with experience resolving defects and engineering issues Experience delivering engineering tasks in line with programme requirements and milestones Ability to produce and review technical documentation (reports, calculations, presentations) Experience using CAD tools and standard engineering/IT software Strong communication skills, with the ability to present technical information to varied audiences Mentoring or supporting junior engineers and contributing to team capability development The Mechanical Platform Systems Team: The Mechanical Platform Systems team plays a key role in supporting the planning and execution of testing and commissioning activities across complex submarine programmes. You will contribute to ensuring engineering activities are delivered safely and effectively while maintaining design intent. This role offers exposure to some of the most complex engineering projects within the Submarines business, alongside strong opportunities for career development. Relocation support may be available, subject to eligibility criteria. A place where everyone can thrive: We're committed to building an inclusive workplace where everyone feels valued and supported. We welcome applications from all suitably qualified people and encourage discussion of reasonable adjustments where needed. Please be aware that many roles at BAE Systems are subject to security and export control restrictions. Applicants must meet Baseline Personnel Security Standard, and many roles require higher levels of National Security Vetting, including 5-10 years continuous UK residency depending on the role . Why BAE Systems? Here you'll build a career with purpose and limitless possibilities. Lifelong learning, meaningful work, and a supportive culture enable you to grow with confidence . You'll be recognised for your contribution and supported with rewards that matter most to you. Closing Date: 24th May 2026 We reserve the right to close this vacancy early if we receive sufficient applications. If you are interested, please apply as early as possible.
May 02, 2026
Full time
Job Title: Senior/Principal Platform Systems Mechanical Engineer Location: Barrow-In-Furness (Onsite) Salary: Competitive Who we are: Join BAE Systems and you'll be part of something bigger. As a valued member of our global colleague network, you'll bring your unique skills and perspectives to help pioneer progress and protect what matters most. You'll be trusted to play your part in delivering advanced, technology-led defence, aerospace and security solutions, shaping a safer future for all of us. From the depths of the ocean to the far reaches of space, there's no limit to where a career at BAE Systems could take you. What you will be doing: In this role, you will support the development and delivery of mechanical platform systems, ensuring robust design evidence is generated to support safe and effective engineering solutions. You will contribute to testing and commissioning activities, support issue resolution, and work closely with multidisciplinary teams to maintain design intent across complex submarine programmes. You will also mentor junior engineers, contribute to technical outputs, and engage with stakeholders to support successful programme delivery. Core duties: Develop and deliver design evidence to justify safe and effective engineering solutions, ensuring customer confidence in system designs Specify and support the build of prototypes, products, and systems for testing and validation activities Provide timely resolution of defects and issues, ensuring corrective actions are identified, tracked, and implemented Ensure engineering commitments are defined, reviewed, and delivered in line with programme requirements Support technical presentations and communications to engineering and management audiences, maintaining awareness of emerging technologies Author and contribute to technical reports, papers, and presentations to support engineering activities and knowledge sharing Mentor and support junior engineers, providing technical guidance and supporting professional development Apply mechanical engineering expertise across design, testing, commissioning, and analysis activities, utilising CAD tools and standard engineering software Essential Skills: Mechanical engineering knowledge across the full lifecycle (design, testing, commissioning, validation) Experience developing and justifying design evidence for engineering solutions Ability to support prototype development, testing, and validation activities Strong problem-solving skills with experience resolving defects and engineering issues Experience delivering engineering tasks in line with programme requirements and milestones Ability to produce and review technical documentation (reports, calculations, presentations) Experience using CAD tools and standard engineering/IT software Strong communication skills, with the ability to present technical information to varied audiences Mentoring or supporting junior engineers and contributing to team capability development The Mechanical Platform Systems Team: The Mechanical Platform Systems team plays a key role in supporting the planning and execution of testing and commissioning activities across complex submarine programmes. You will contribute to ensuring engineering activities are delivered safely and effectively while maintaining design intent. This role offers exposure to some of the most complex engineering projects within the Submarines business, alongside strong opportunities for career development. Relocation support may be available, subject to eligibility criteria. A place where everyone can thrive: We're committed to building an inclusive workplace where everyone feels valued and supported. We welcome applications from all suitably qualified people and encourage discussion of reasonable adjustments where needed. Please be aware that many roles at BAE Systems are subject to security and export control restrictions. Applicants must meet Baseline Personnel Security Standard, and many roles require higher levels of National Security Vetting, including 5-10 years continuous UK residency depending on the role . Why BAE Systems? Here you'll build a career with purpose and limitless possibilities. Lifelong learning, meaningful work, and a supportive culture enable you to grow with confidence . You'll be recognised for your contribution and supported with rewards that matter most to you. Closing Date: 24th May 2026 We reserve the right to close this vacancy early if we receive sufficient applications. If you are interested, please apply as early as possible.
Job Title: Senior/Principal Platform Systems Mechanical Engineer Location: Barrow-In-Furness (Onsite) Salary: Competitive Who we are: Join BAE Systems and you'll be part of something bigger. As a valued member of our global colleague network, you'll bring your unique skills and perspectives to help pioneer progress and protect what matters most. You'll be trusted to play your part in delivering advanced, technology-led defence, aerospace and security solutions, shaping a safer future for all of us. From the depths of the ocean to the far reaches of space, there's no limit to where a career at BAE Systems could take you. What you will be doing: In this role, you will support the development and delivery of mechanical platform systems, ensuring robust design evidence is generated to support safe and effective engineering solutions. You will contribute to testing and commissioning activities, support issue resolution, and work closely with multidisciplinary teams to maintain design intent across complex submarine programmes. You will also mentor junior engineers, contribute to technical outputs, and engage with stakeholders to support successful programme delivery. Core duties: Develop and deliver design evidence to justify safe and effective engineering solutions, ensuring customer confidence in system designs Specify and support the build of prototypes, products, and systems for testing and validation activities Provide timely resolution of defects and issues, ensuring corrective actions are identified, tracked, and implemented Ensure engineering commitments are defined, reviewed, and delivered in line with programme requirements Support technical presentations and communications to engineering and management audiences, maintaining awareness of emerging technologies Author and contribute to technical reports, papers, and presentations to support engineering activities and knowledge sharing Mentor and support junior engineers, providing technical guidance and supporting professional development Apply mechanical engineering expertise across design, testing, commissioning, and analysis activities, utilising CAD tools and standard engineering software Essential Skills: Mechanical engineering knowledge across the full lifecycle (design, testing, commissioning, validation) Experience developing and justifying design evidence for engineering solutions Ability to support prototype development, testing, and validation activities Strong problem-solving skills with experience resolving defects and engineering issues Experience delivering engineering tasks in line with programme requirements and milestones Ability to produce and review technical documentation (reports, calculations, presentations) Experience using CAD tools and standard engineering/IT software Strong communication skills, with the ability to present technical information to varied audiences Mentoring or supporting junior engineers and contributing to team capability development The Mechanical Platform Systems Team: The Mechanical Platform Systems team plays a key role in supporting the planning and execution of testing and commissioning activities across complex submarine programmes. You will contribute to ensuring engineering activities are delivered safely and effectively while maintaining design intent. This role offers exposure to some of the most complex engineering projects within the Submarines business, alongside strong opportunities for career development. Relocation support may be available, subject to eligibility criteria. A place where everyone can thrive: We're committed to building an inclusive workplace where everyone feels valued and supported. We welcome applications from all suitably qualified people and encourage discussion of reasonable adjustments where needed. Please be aware that many roles at BAE Systems are subject to security and export control restrictions. Applicants must meet Baseline Personnel Security Standard, and many roles require higher levels of National Security Vetting, including 5-10 years continuous UK residency depending on the role . Why BAE Systems? Here you'll build a career with purpose and limitless possibilities. Lifelong learning, meaningful work, and a supportive culture enable you to grow with confidence . You'll be recognised for your contribution and supported with rewards that matter most to you. Closing Date: 24th May 2026 We reserve the right to close this vacancy early if we receive sufficient applications. If you are interested, please apply as early as possible.
May 02, 2026
Full time
Job Title: Senior/Principal Platform Systems Mechanical Engineer Location: Barrow-In-Furness (Onsite) Salary: Competitive Who we are: Join BAE Systems and you'll be part of something bigger. As a valued member of our global colleague network, you'll bring your unique skills and perspectives to help pioneer progress and protect what matters most. You'll be trusted to play your part in delivering advanced, technology-led defence, aerospace and security solutions, shaping a safer future for all of us. From the depths of the ocean to the far reaches of space, there's no limit to where a career at BAE Systems could take you. What you will be doing: In this role, you will support the development and delivery of mechanical platform systems, ensuring robust design evidence is generated to support safe and effective engineering solutions. You will contribute to testing and commissioning activities, support issue resolution, and work closely with multidisciplinary teams to maintain design intent across complex submarine programmes. You will also mentor junior engineers, contribute to technical outputs, and engage with stakeholders to support successful programme delivery. Core duties: Develop and deliver design evidence to justify safe and effective engineering solutions, ensuring customer confidence in system designs Specify and support the build of prototypes, products, and systems for testing and validation activities Provide timely resolution of defects and issues, ensuring corrective actions are identified, tracked, and implemented Ensure engineering commitments are defined, reviewed, and delivered in line with programme requirements Support technical presentations and communications to engineering and management audiences, maintaining awareness of emerging technologies Author and contribute to technical reports, papers, and presentations to support engineering activities and knowledge sharing Mentor and support junior engineers, providing technical guidance and supporting professional development Apply mechanical engineering expertise across design, testing, commissioning, and analysis activities, utilising CAD tools and standard engineering software Essential Skills: Mechanical engineering knowledge across the full lifecycle (design, testing, commissioning, validation) Experience developing and justifying design evidence for engineering solutions Ability to support prototype development, testing, and validation activities Strong problem-solving skills with experience resolving defects and engineering issues Experience delivering engineering tasks in line with programme requirements and milestones Ability to produce and review technical documentation (reports, calculations, presentations) Experience using CAD tools and standard engineering/IT software Strong communication skills, with the ability to present technical information to varied audiences Mentoring or supporting junior engineers and contributing to team capability development The Mechanical Platform Systems Team: The Mechanical Platform Systems team plays a key role in supporting the planning and execution of testing and commissioning activities across complex submarine programmes. You will contribute to ensuring engineering activities are delivered safely and effectively while maintaining design intent. This role offers exposure to some of the most complex engineering projects within the Submarines business, alongside strong opportunities for career development. Relocation support may be available, subject to eligibility criteria. A place where everyone can thrive: We're committed to building an inclusive workplace where everyone feels valued and supported. We welcome applications from all suitably qualified people and encourage discussion of reasonable adjustments where needed. Please be aware that many roles at BAE Systems are subject to security and export control restrictions. Applicants must meet Baseline Personnel Security Standard, and many roles require higher levels of National Security Vetting, including 5-10 years continuous UK residency depending on the role . Why BAE Systems? Here you'll build a career with purpose and limitless possibilities. Lifelong learning, meaningful work, and a supportive culture enable you to grow with confidence . You'll be recognised for your contribution and supported with rewards that matter most to you. Closing Date: 24th May 2026 We reserve the right to close this vacancy early if we receive sufficient applications. If you are interested, please apply as early as possible.
We have an exciting opportunity for a Mechanical Design Engineer who possesses drive, enthusiasm, and both creative and logical thinking. This role involves leading a mechanical team within the Sparkworks portfolio of programmes, providing essential technical and management support to the team. Salary: Circa £ 60,000 depending on experience Dynamic (hybrid) working: 5 days per week on-site due to workload classification Security Clearance: British Citizen Restrictions and/or limitations relating to nationality and/or rights to work may apply. As a minimum and after offer stage, all successful candidates will need to undergo HMG Basic Personnel Security Standard checks (BPSS), which are managed by the MBDA Personnel Security Team. What we can offer you: Company bonus: Up to £2,500 (based on company performance and will vary year to year) Pension: maximum total (employer and employee) contribution of up to 14% Overtime: opportunity for paid overtime Flexi Leave: Up to 15 additional days Flexible working: We welcome applicants who are looking for flexible working arrangements Enhanced parental leave: offers up to 26 weeks for maternity, adoption and shared parental leave -enhancements are available for paternity leave, neonatal leave and fertility testing and treatments Facilities: Fantastic site facilities including subsidised meals, free car parking and much more Healthcare Cash Plan: The Healthcare Cash Plan benefit provides the option to claim cash back on everyday healthcare expenses such as optical, dental, health and wellbeing and more . The opportunity: You'll be providing technical oversight of the team's work, ensuring the team develop viable mechanical conceptual designs. As the primary mechanical engineering interface into other key stakeholders on the project. Keeping track of budgets, workloads and ensuring tasks are delivered on time. As the team lead you'll be providing day to day management support to the team and have responsibility for the development and performance management of the team. This is a great opportunity to work in a fast paced environment, working on novel and disruptive technologies within Sparkworks. It will also be an initial step in to a management role which is a great opportunity for someone looking for the next step. What we're looking for from you: Experience of mechanical design, early technology development, ideally taking parts through from conceptual design, through development and certification and people & project management experience. Relevant 3D CAD/CAE experience (training on our preferred CAE tools will be given) Strong communication skills, both written and verbal The ability to work with, influence and negotiate with stakeholders across the business. Our company: Peace is not a given, Freedom is not a given, Sovereignty is not a given MBDA is a leading defence organisation. We are proud of the role we play in supporting the Armed Forces who protect our nations. We partner with governments to work together towards a common goal, defending our freedom. We are proud of our employee-led networks, examples include: Gender Equality, Pride, Menopause Matters, Parents and Carers, Armed Forces, Ethnic Diversity, Neurodiversity, Disability and more We recognise that everyone is unique, and we encourage you to speak to us should you require any advice, support or adjustments throughout our recruitment process. Follow us on LinkedIn (MBDA), X Instagram (MBDA_UK) and Glassdoor or visit our MBDA Careers website for more information.
May 02, 2026
Full time
We have an exciting opportunity for a Mechanical Design Engineer who possesses drive, enthusiasm, and both creative and logical thinking. This role involves leading a mechanical team within the Sparkworks portfolio of programmes, providing essential technical and management support to the team. Salary: Circa £ 60,000 depending on experience Dynamic (hybrid) working: 5 days per week on-site due to workload classification Security Clearance: British Citizen Restrictions and/or limitations relating to nationality and/or rights to work may apply. As a minimum and after offer stage, all successful candidates will need to undergo HMG Basic Personnel Security Standard checks (BPSS), which are managed by the MBDA Personnel Security Team. What we can offer you: Company bonus: Up to £2,500 (based on company performance and will vary year to year) Pension: maximum total (employer and employee) contribution of up to 14% Overtime: opportunity for paid overtime Flexi Leave: Up to 15 additional days Flexible working: We welcome applicants who are looking for flexible working arrangements Enhanced parental leave: offers up to 26 weeks for maternity, adoption and shared parental leave -enhancements are available for paternity leave, neonatal leave and fertility testing and treatments Facilities: Fantastic site facilities including subsidised meals, free car parking and much more Healthcare Cash Plan: The Healthcare Cash Plan benefit provides the option to claim cash back on everyday healthcare expenses such as optical, dental, health and wellbeing and more . The opportunity: You'll be providing technical oversight of the team's work, ensuring the team develop viable mechanical conceptual designs. As the primary mechanical engineering interface into other key stakeholders on the project. Keeping track of budgets, workloads and ensuring tasks are delivered on time. As the team lead you'll be providing day to day management support to the team and have responsibility for the development and performance management of the team. This is a great opportunity to work in a fast paced environment, working on novel and disruptive technologies within Sparkworks. It will also be an initial step in to a management role which is a great opportunity for someone looking for the next step. What we're looking for from you: Experience of mechanical design, early technology development, ideally taking parts through from conceptual design, through development and certification and people & project management experience. Relevant 3D CAD/CAE experience (training on our preferred CAE tools will be given) Strong communication skills, both written and verbal The ability to work with, influence and negotiate with stakeholders across the business. Our company: Peace is not a given, Freedom is not a given, Sovereignty is not a given MBDA is a leading defence organisation. We are proud of the role we play in supporting the Armed Forces who protect our nations. We partner with governments to work together towards a common goal, defending our freedom. We are proud of our employee-led networks, examples include: Gender Equality, Pride, Menopause Matters, Parents and Carers, Armed Forces, Ethnic Diversity, Neurodiversity, Disability and more We recognise that everyone is unique, and we encourage you to speak to us should you require any advice, support or adjustments throughout our recruitment process. Follow us on LinkedIn (MBDA), X Instagram (MBDA_UK) and Glassdoor or visit our MBDA Careers website for more information.
This role provides a unique chance to shape how MBDA undertakes production testing. Salary: Circa £50,000 depending on experience Dynamic (hybrid) working: 4-5 days per week on-site due to workload classification Security Clearance: British Citizen only. Restrictions and/or limitations relating to nationality and/or rights to work may apply. As a minimum and after offer stage, all successful candidates will need to undergo HMG Basic Personnel Security Standard checks (BPSS), which are managed by the MBDA Personnel Security Team. What we can offer you: Company bonus: Up to £2,500 (based on company performance and will vary year to year) Pension: maximum total (employer and employee) contribution of up to 14% Overtime: opportunity for paid overtime Flexi Leave: Up to 15 additional days Flexible working: We welcome applicants who are looking for flexible working arrangements Enhanced parental leave: offers up to 26 weeks for maternity, adoption and shared parental leave -enhancements are available for paternity leave, neonatal leave and fertility testing and treatments Facilities: Fantastic site facilities including subsidised meals, free car parking. Healthcare Cash Plan: The Healthcare Cash Plan benefit provides the option to claim cash back on everyday healthcare expenses such as optical, dental, health and wellbeing and more. The opportunity: This opportunity is for a Principal Test Engineer to join the Manufacturing organisation supporting test system introduction and test and diagnostics of electrical/electronic weapon systems and sub-assemblies during the development / early production phase. You will work as part of the Manufacturing UK Test Engineering function, responsible for development testing and ensuring production readiness of new products and their test solutions. Providing Test Engineering support during Design / Development phases from initial concept through to Production Readiness Review and release to Operations. Supporting Test Facility introduction and ensure that appropriate configuration control of equipment and facilities is in place prior to use, including generating supporting test specifications and operator instructions. Supporting testing of electrical/electronic weapon systems, sub-assemblies and circuit cards, with diagnosis of development test failures down to circuit card and potentially component level, including identification of proposed remedial and corrective actions. Working closely with Operations, design teams and other stakeholders to overcome any technical challenges. Providing technical support and advice to the Test Engineering Team Lead and guiding and mentoring less experienced test engineers within the team. You will be working with a small team of dedicated engineers in a fast-paced but friendly and inclusive manufacturing environment. The team has a great mix of personnel ranging from apprentices and graduate engineers through to experienced technical practitioners, all striving to deliver technical excellence across a number of different products in development and production. What we're looking for from you: Minimum Qualification Level Level 4 or greater in Engineering (preferably Electrical, Electronic, Aerospace or Mechanical), Physics or Maths. Must include modules for Electronic Principles (digital or analogue) or Electrical Principles. Several years' experience in related industry / manufacturing. A good understanding of electrical/electronic and RF measurement and test principles and test equipment, as well as systems-level functional testing. Experience of the product development lifecycle and supporting processes, in an electronics manufacturing environment. Significant experience of using both manual and automated test equipment, preferably in a defence organisation or similar manufacturing environment. The ability to plan and organise own work in order to ensure multiple tasks can be prioritised and delivered against Project objectives, whilst being available to support others. Good verbal and written communication skills, including working within a team, generation of test specifications, operator instructions and technical reports based on higher-level requirements. Our company: Peace is not a given, Freedom is not a given, Sovereignty is not a given MBDA is a leading defence organisation. We are proud of the role we play in supporting the Armed Forces who protect our nations. We partner with governments to work together towards a common goal, defending our freedom. We are proud of our employee-led networks, examples include: Gender Equality, Pride, Menopause Matters, Parents and Carers, Armed Forces, Ethnic Diversity, Neurodiversity, Disability and more We recognise that everyone is unique, and we encourage you to speak to us should you require any advice, support or adjustments throughout our recruitment process. Follow us on LinkedIn (MBDA), X Instagram (MBDA_UK) and Glassdoor or visit our MBDA Careers website for more information.
May 02, 2026
Full time
This role provides a unique chance to shape how MBDA undertakes production testing. Salary: Circa £50,000 depending on experience Dynamic (hybrid) working: 4-5 days per week on-site due to workload classification Security Clearance: British Citizen only. Restrictions and/or limitations relating to nationality and/or rights to work may apply. As a minimum and after offer stage, all successful candidates will need to undergo HMG Basic Personnel Security Standard checks (BPSS), which are managed by the MBDA Personnel Security Team. What we can offer you: Company bonus: Up to £2,500 (based on company performance and will vary year to year) Pension: maximum total (employer and employee) contribution of up to 14% Overtime: opportunity for paid overtime Flexi Leave: Up to 15 additional days Flexible working: We welcome applicants who are looking for flexible working arrangements Enhanced parental leave: offers up to 26 weeks for maternity, adoption and shared parental leave -enhancements are available for paternity leave, neonatal leave and fertility testing and treatments Facilities: Fantastic site facilities including subsidised meals, free car parking. Healthcare Cash Plan: The Healthcare Cash Plan benefit provides the option to claim cash back on everyday healthcare expenses such as optical, dental, health and wellbeing and more. The opportunity: This opportunity is for a Principal Test Engineer to join the Manufacturing organisation supporting test system introduction and test and diagnostics of electrical/electronic weapon systems and sub-assemblies during the development / early production phase. You will work as part of the Manufacturing UK Test Engineering function, responsible for development testing and ensuring production readiness of new products and their test solutions. Providing Test Engineering support during Design / Development phases from initial concept through to Production Readiness Review and release to Operations. Supporting Test Facility introduction and ensure that appropriate configuration control of equipment and facilities is in place prior to use, including generating supporting test specifications and operator instructions. Supporting testing of electrical/electronic weapon systems, sub-assemblies and circuit cards, with diagnosis of development test failures down to circuit card and potentially component level, including identification of proposed remedial and corrective actions. Working closely with Operations, design teams and other stakeholders to overcome any technical challenges. Providing technical support and advice to the Test Engineering Team Lead and guiding and mentoring less experienced test engineers within the team. You will be working with a small team of dedicated engineers in a fast-paced but friendly and inclusive manufacturing environment. The team has a great mix of personnel ranging from apprentices and graduate engineers through to experienced technical practitioners, all striving to deliver technical excellence across a number of different products in development and production. What we're looking for from you: Minimum Qualification Level Level 4 or greater in Engineering (preferably Electrical, Electronic, Aerospace or Mechanical), Physics or Maths. Must include modules for Electronic Principles (digital or analogue) or Electrical Principles. Several years' experience in related industry / manufacturing. A good understanding of electrical/electronic and RF measurement and test principles and test equipment, as well as systems-level functional testing. Experience of the product development lifecycle and supporting processes, in an electronics manufacturing environment. Significant experience of using both manual and automated test equipment, preferably in a defence organisation or similar manufacturing environment. The ability to plan and organise own work in order to ensure multiple tasks can be prioritised and delivered against Project objectives, whilst being available to support others. Good verbal and written communication skills, including working within a team, generation of test specifications, operator instructions and technical reports based on higher-level requirements. Our company: Peace is not a given, Freedom is not a given, Sovereignty is not a given MBDA is a leading defence organisation. We are proud of the role we play in supporting the Armed Forces who protect our nations. We partner with governments to work together towards a common goal, defending our freedom. We are proud of our employee-led networks, examples include: Gender Equality, Pride, Menopause Matters, Parents and Carers, Armed Forces, Ethnic Diversity, Neurodiversity, Disability and more We recognise that everyone is unique, and we encourage you to speak to us should you require any advice, support or adjustments throughout our recruitment process. Follow us on LinkedIn (MBDA), X Instagram (MBDA_UK) and Glassdoor or visit our MBDA Careers website for more information.
Job Title: Senior/Principal Platform Systems Mechanical Engineer Location: Barrow-In-Furness (Onsite) Salary: Competitive Who we are: Join BAE Systems and you'll be part of something bigger. As a valued member of our global colleague network, you'll bring your unique skills and perspectives to help pioneer progress and protect what matters most. You'll be trusted to play your part in delivering advanced, technology-led defence, aerospace and security solutions, shaping a safer future for all of us. From the depths of the ocean to the far reaches of space, there's no limit to where a career at BAE Systems could take you. What you will be doing: In this role, you will support the development and delivery of mechanical platform systems, ensuring robust design evidence is generated to support safe and effective engineering solutions. You will contribute to testing and commissioning activities, support issue resolution, and work closely with multidisciplinary teams to maintain design intent across complex submarine programmes. You will also mentor junior engineers, contribute to technical outputs, and engage with stakeholders to support successful programme delivery. Core duties: Develop and deliver design evidence to justify safe and effective engineering solutions, ensuring customer confidence in system designs Specify and support the build of prototypes, products, and systems for testing and validation activities Provide timely resolution of defects and issues, ensuring corrective actions are identified, tracked, and implemented Ensure engineering commitments are defined, reviewed, and delivered in line with programme requirements Support technical presentations and communications to engineering and management audiences, maintaining awareness of emerging technologies Author and contribute to technical reports, papers, and presentations to support engineering activities and knowledge sharing Mentor and support junior engineers, providing technical guidance and supporting professional development Apply mechanical engineering expertise across design, testing, commissioning, and analysis activities, utilising CAD tools and standard engineering software Essential Skills: Mechanical engineering knowledge across the full lifecycle (design, testing, commissioning, validation) Experience developing and justifying design evidence for engineering solutions Ability to support prototype development, testing, and validation activities Strong problem-solving skills with experience resolving defects and engineering issues Experience delivering engineering tasks in line with programme requirements and milestones Ability to produce and review technical documentation (reports, calculations, presentations) Experience using CAD tools and standard engineering/IT software Strong communication skills, with the ability to present technical information to varied audiences Mentoring or supporting junior engineers and contributing to team capability development The Mechanical Platform Systems Team: The Mechanical Platform Systems team plays a key role in supporting the planning and execution of testing and commissioning activities across complex submarine programmes. You will contribute to ensuring engineering activities are delivered safely and effectively while maintaining design intent. This role offers exposure to some of the most complex engineering projects within the Submarines business, alongside strong opportunities for career development. Relocation support may be available, subject to eligibility criteria. A place where everyone can thrive: We're committed to building an inclusive workplace where everyone feels valued and supported. We welcome applications from all suitably qualified people and encourage discussion of reasonable adjustments where needed. Please be aware that many roles at BAE Systems are subject to security and export control restrictions. Applicants must meet Baseline Personnel Security Standard, and many roles require higher levels of National Security Vetting, including 5-10 years continuous UK residency depending on the role . Why BAE Systems? Here you'll build a career with purpose and limitless possibilities. Lifelong learning, meaningful work, and a supportive culture enable you to grow with confidence . You'll be recognised for your contribution and supported with rewards that matter most to you. Closing Date: 24th May 2026 We reserve the right to close this vacancy early if we receive sufficient applications. If you are interested, please apply as early as possible.
May 02, 2026
Full time
Job Title: Senior/Principal Platform Systems Mechanical Engineer Location: Barrow-In-Furness (Onsite) Salary: Competitive Who we are: Join BAE Systems and you'll be part of something bigger. As a valued member of our global colleague network, you'll bring your unique skills and perspectives to help pioneer progress and protect what matters most. You'll be trusted to play your part in delivering advanced, technology-led defence, aerospace and security solutions, shaping a safer future for all of us. From the depths of the ocean to the far reaches of space, there's no limit to where a career at BAE Systems could take you. What you will be doing: In this role, you will support the development and delivery of mechanical platform systems, ensuring robust design evidence is generated to support safe and effective engineering solutions. You will contribute to testing and commissioning activities, support issue resolution, and work closely with multidisciplinary teams to maintain design intent across complex submarine programmes. You will also mentor junior engineers, contribute to technical outputs, and engage with stakeholders to support successful programme delivery. Core duties: Develop and deliver design evidence to justify safe and effective engineering solutions, ensuring customer confidence in system designs Specify and support the build of prototypes, products, and systems for testing and validation activities Provide timely resolution of defects and issues, ensuring corrective actions are identified, tracked, and implemented Ensure engineering commitments are defined, reviewed, and delivered in line with programme requirements Support technical presentations and communications to engineering and management audiences, maintaining awareness of emerging technologies Author and contribute to technical reports, papers, and presentations to support engineering activities and knowledge sharing Mentor and support junior engineers, providing technical guidance and supporting professional development Apply mechanical engineering expertise across design, testing, commissioning, and analysis activities, utilising CAD tools and standard engineering software Essential Skills: Mechanical engineering knowledge across the full lifecycle (design, testing, commissioning, validation) Experience developing and justifying design evidence for engineering solutions Ability to support prototype development, testing, and validation activities Strong problem-solving skills with experience resolving defects and engineering issues Experience delivering engineering tasks in line with programme requirements and milestones Ability to produce and review technical documentation (reports, calculations, presentations) Experience using CAD tools and standard engineering/IT software Strong communication skills, with the ability to present technical information to varied audiences Mentoring or supporting junior engineers and contributing to team capability development The Mechanical Platform Systems Team: The Mechanical Platform Systems team plays a key role in supporting the planning and execution of testing and commissioning activities across complex submarine programmes. You will contribute to ensuring engineering activities are delivered safely and effectively while maintaining design intent. This role offers exposure to some of the most complex engineering projects within the Submarines business, alongside strong opportunities for career development. Relocation support may be available, subject to eligibility criteria. A place where everyone can thrive: We're committed to building an inclusive workplace where everyone feels valued and supported. We welcome applications from all suitably qualified people and encourage discussion of reasonable adjustments where needed. Please be aware that many roles at BAE Systems are subject to security and export control restrictions. Applicants must meet Baseline Personnel Security Standard, and many roles require higher levels of National Security Vetting, including 5-10 years continuous UK residency depending on the role . Why BAE Systems? Here you'll build a career with purpose and limitless possibilities. Lifelong learning, meaningful work, and a supportive culture enable you to grow with confidence . You'll be recognised for your contribution and supported with rewards that matter most to you. Closing Date: 24th May 2026 We reserve the right to close this vacancy early if we receive sufficient applications. If you are interested, please apply as early as possible.
