Lead Subsea Acoustics Engineer Near Farnborough £Competitive + Bonus + Great Benefits Were seeking an innovative Lead or Principal Engineer to guide the development of next-generation underwater positioning and communication systems. This is a high-impact technical leadership role at the intersection of acoustics, embedded systems, and subsea engineering delivering reliable, secure, and intuitive sol click apply for full job details
May 16, 2026
Full time
Lead Subsea Acoustics Engineer Near Farnborough £Competitive + Bonus + Great Benefits Were seeking an innovative Lead or Principal Engineer to guide the development of next-generation underwater positioning and communication systems. This is a high-impact technical leadership role at the intersection of acoustics, embedded systems, and subsea engineering delivering reliable, secure, and intuitive sol click apply for full job details
Construction Lecturer Location: NCG Sites - Southwark College, Lewisham College & NCG Higher Education Centre (London) Contract: Temporary / Permanent (subject to experience and availability) Hours: Full-time / Part-time opportunities available Start Date: To be confirmed Advertised by: The Supply Register Job Summary The Supply Register is recruiting on behalf of NCG for knowledgeable and passionate Construction Lecturers to support teaching across construction and built environment programmes at Southwark College, Lewisham College, and the NCG Higher Education Centre in London . This is an excellent opportunity for experienced construction professionals or qualified lecturers who are passionate about sharing their industry knowledge and helping students develop the practical skills and technical understanding needed to succeed in the construction sector. NCG delivers a wide range of vocational and higher education construction programmes , preparing learners for careers across the built environment and skilled trades industries. About the Role As a Construction Lecturer, you will: • Deliver high-quality teaching, learning, and assessment across construction programmes • Teach within areas such as Carpentry & Joinery, Brickwork, Plumbing, Electrical Installation, Construction Management, or Built Environment (depending on experience) • Plan and deliver engaging lessons that combine practical and theoretical learning • Assess student work and provide constructive feedback to support progress and achievement • Support students in developing industry-relevant skills and employability knowledge • Contribute to course development, curriculum planning, and quality assurance processes • Maintain a safe and inclusive learning environment, particularly within workshops or practical settings • Work collaboratively with colleagues to support student success and programme delivery Requirements Essential • A qualification or significant industry experience in a construction trade or built environment discipline (e.g. carpentry, brickwork, plumbing, electrical, or construction management) • Experience teaching, training, mentoring, or supervising apprentices/learners • Strong industry knowledge and practical skills • Ability to engage and motivate students from diverse backgrounds • Good communication and organisational skills Desirable • A recognised teaching qualification (PGCE, Cert Ed, or equivalent) • Experience delivering further education or higher education construction programmes • Relevant assessor or verifier qualifications • Industry-recognised trade or professional qualifications What We Offer • Opportunity to teach across NCG's construction provision in London • Competitive pay rates, dependent on experience • Weekly payroll through The Supply Register • Ongoing support and professional development • A professional and supportive working environment Safeguarding Statement The Supply Register and NCG are committed to safeguarding and promoting the welfare of children, young people, and vulnerable adults. All successful applicants will be required to undertake appropriate safeguarding checks, including an enhanced DBS where applicable. Interested? Apply now with your CV via The Supply Register to be considered for this Construction Lecturer opportunity supporting NCG sites across Southwark, Lewisham, and the NCG Higher Education Centre in London.
May 16, 2026
Seasonal
Construction Lecturer Location: NCG Sites - Southwark College, Lewisham College & NCG Higher Education Centre (London) Contract: Temporary / Permanent (subject to experience and availability) Hours: Full-time / Part-time opportunities available Start Date: To be confirmed Advertised by: The Supply Register Job Summary The Supply Register is recruiting on behalf of NCG for knowledgeable and passionate Construction Lecturers to support teaching across construction and built environment programmes at Southwark College, Lewisham College, and the NCG Higher Education Centre in London . This is an excellent opportunity for experienced construction professionals or qualified lecturers who are passionate about sharing their industry knowledge and helping students develop the practical skills and technical understanding needed to succeed in the construction sector. NCG delivers a wide range of vocational and higher education construction programmes , preparing learners for careers across the built environment and skilled trades industries. About the Role As a Construction Lecturer, you will: • Deliver high-quality teaching, learning, and assessment across construction programmes • Teach within areas such as Carpentry & Joinery, Brickwork, Plumbing, Electrical Installation, Construction Management, or Built Environment (depending on experience) • Plan and deliver engaging lessons that combine practical and theoretical learning • Assess student work and provide constructive feedback to support progress and achievement • Support students in developing industry-relevant skills and employability knowledge • Contribute to course development, curriculum planning, and quality assurance processes • Maintain a safe and inclusive learning environment, particularly within workshops or practical settings • Work collaboratively with colleagues to support student success and programme delivery Requirements Essential • A qualification or significant industry experience in a construction trade or built environment discipline (e.g. carpentry, brickwork, plumbing, electrical, or construction management) • Experience teaching, training, mentoring, or supervising apprentices/learners • Strong industry knowledge and practical skills • Ability to engage and motivate students from diverse backgrounds • Good communication and organisational skills Desirable • A recognised teaching qualification (PGCE, Cert Ed, or equivalent) • Experience delivering further education or higher education construction programmes • Relevant assessor or verifier qualifications • Industry-recognised trade or professional qualifications What We Offer • Opportunity to teach across NCG's construction provision in London • Competitive pay rates, dependent on experience • Weekly payroll through The Supply Register • Ongoing support and professional development • A professional and supportive working environment Safeguarding Statement The Supply Register and NCG are committed to safeguarding and promoting the welfare of children, young people, and vulnerable adults. All successful applicants will be required to undertake appropriate safeguarding checks, including an enhanced DBS where applicable. Interested? Apply now with your CV via The Supply Register to be considered for this Construction Lecturer opportunity supporting NCG sites across Southwark, Lewisham, and the NCG Higher Education Centre in London.
Senior Document Controller We are seeking an experienced Senior Document Controller with a proven track record in managing and maintaining document control processes. The ideal candidate will have experience in document control, be highly skilled in Electronic Document Management Systems (EDMS), and possess excellent communication and organisational abilities. Key Responsibilities: Maintain and update project documentation in compliance with company standards. Ensure accurate filing, retrieval, and distribution of documents across teams. Monitor document workflows and approvals within EDMS systems. Act as the primary point of contact for EDMS-related queries. Configure and manage document control settings in Asite and other platforms. Train and mentor new starters on document control processes and EDMS systems. Provide ongoing support to project teams on document management best practices. Ensure all documentation meets regulatory and project requirements. Conduct periodic audits to maintain data integrity and compliance. Liaise with internal teams, contractors, and clients to ensure smooth document flow. Support project managers with reporting and document status updates. Work across multiple platforms and systems to ensure consistency of data. Verify that all project information is captured and consolidated within Asite, maintaining a single source of truth for documentation. Department: Information Management Reports to: Document Control Manager Key Skills and qualifications: Proficient in Microsoft Office Suite (Word, Excel, Outlook, PowerPoint). Ability to create formulas and macros in Microsoft Excel Ability to manage large volumes of documentation accurately and efficiently. Desirable: Experience with Power BI Excellent communication and interpersonal skills. Strong attention to detail and organisational ability. Ability to work under pressure and meet deadlines. Experience in document control within construction, engineering, or related sectors. Strong knowledge of EDMS platforms. Essential: Hands-on experience with Asite (System Admin). Desirable: Familiarity with EB and ProjectWise. Certification in Document Control or EDMS systems (advantageous). Key relationships: Operational Delivery Teams, Design, Planning, Construction, Information Management, Quality & Assurance. Please note that this job description does not represent a comprehensive list of activities and employees may be requested to undertake other reasonable duties. Seize the challenge. Move the world together! Innovative, creative, respectful, and diverse are some of the ways we describe ourselves. We are motivated by challenges, and we collaborate across our business units to move the world together. Your journey to a fulfilling career starts here! Ferrovial is an equal opportunity employer. We treat all jobs applications equally, regardless of gender, color, race, ethnicity, religion, national origin, age, disability, pregnancy, sexual orientation, gender identity and expression, covered veteran status or protected genetic information (each, a Protected Class ), or any other protected class in accordance with applicable laws.
May 16, 2026
Full time
Senior Document Controller We are seeking an experienced Senior Document Controller with a proven track record in managing and maintaining document control processes. The ideal candidate will have experience in document control, be highly skilled in Electronic Document Management Systems (EDMS), and possess excellent communication and organisational abilities. Key Responsibilities: Maintain and update project documentation in compliance with company standards. Ensure accurate filing, retrieval, and distribution of documents across teams. Monitor document workflows and approvals within EDMS systems. Act as the primary point of contact for EDMS-related queries. Configure and manage document control settings in Asite and other platforms. Train and mentor new starters on document control processes and EDMS systems. Provide ongoing support to project teams on document management best practices. Ensure all documentation meets regulatory and project requirements. Conduct periodic audits to maintain data integrity and compliance. Liaise with internal teams, contractors, and clients to ensure smooth document flow. Support project managers with reporting and document status updates. Work across multiple platforms and systems to ensure consistency of data. Verify that all project information is captured and consolidated within Asite, maintaining a single source of truth for documentation. Department: Information Management Reports to: Document Control Manager Key Skills and qualifications: Proficient in Microsoft Office Suite (Word, Excel, Outlook, PowerPoint). Ability to create formulas and macros in Microsoft Excel Ability to manage large volumes of documentation accurately and efficiently. Desirable: Experience with Power BI Excellent communication and interpersonal skills. Strong attention to detail and organisational ability. Ability to work under pressure and meet deadlines. Experience in document control within construction, engineering, or related sectors. Strong knowledge of EDMS platforms. Essential: Hands-on experience with Asite (System Admin). Desirable: Familiarity with EB and ProjectWise. Certification in Document Control or EDMS systems (advantageous). Key relationships: Operational Delivery Teams, Design, Planning, Construction, Information Management, Quality & Assurance. Please note that this job description does not represent a comprehensive list of activities and employees may be requested to undertake other reasonable duties. Seize the challenge. Move the world together! Innovative, creative, respectful, and diverse are some of the ways we describe ourselves. We are motivated by challenges, and we collaborate across our business units to move the world together. Your journey to a fulfilling career starts here! Ferrovial is an equal opportunity employer. We treat all jobs applications equally, regardless of gender, color, race, ethnicity, religion, national origin, age, disability, pregnancy, sexual orientation, gender identity and expression, covered veteran status or protected genetic information (each, a Protected Class ), or any other protected class in accordance with applicable laws.
Mechanical Service Engineer A well-established manufacturer of high quality, specialist equipment now has a need for an additional Service Engineer. The organisation offers excellent working conditions, career development and benefits. The Service Engineer will support the service team by carrying out a wide range of hands-on engineering and workshop activities. This role is ideal for an experienced mechanical Technician or engineer who enjoys practical fault-finding, repairs and testing, in a workshop environment. Role responsibilities include: Workshop Engineering Support Carry out strip-down, inspection, repair, build, and reassembly of components and systems. Support the service team with workshop-based tasks, including preparation and completion of service work. Produce clear and accurate inspection reports and repair documentation. Testing and Quality Carry out functional testing of repaired or serviced equipment. Ensure work is completed to required quality and safety standards. Workshop Control Maintain good standards of workshop organisation and housekeeping. Manage workshop stock, tools, and test equipment. Maintain existing work and test kits and assist with the preparation of new kits as required. Equipment and Product Handling Clean, check, and prepare hire equipment Carry out general repairs on returned customer equipment and systems. Test calibrated products, following documented procedures. Skills & Experience: Mechanical engineering background with hands-on workshop experience. Strong fault-finding and problem-solving skills. Ability to write clear and accurate reports. Good communication skills, both verbal and written. Reliable team player with a positive attitude. Previous experience working in a service or repair environment. Previous hydraulic equipment repair experience is highly desirable Interested, please contact Graeme at Vibe Recruitment on (phone number removed) or apply immediately Vibe Recruit is acting as an Employment Agency in relation to this vacancy.
May 16, 2026
Full time
Mechanical Service Engineer A well-established manufacturer of high quality, specialist equipment now has a need for an additional Service Engineer. The organisation offers excellent working conditions, career development and benefits. The Service Engineer will support the service team by carrying out a wide range of hands-on engineering and workshop activities. This role is ideal for an experienced mechanical Technician or engineer who enjoys practical fault-finding, repairs and testing, in a workshop environment. Role responsibilities include: Workshop Engineering Support Carry out strip-down, inspection, repair, build, and reassembly of components and systems. Support the service team with workshop-based tasks, including preparation and completion of service work. Produce clear and accurate inspection reports and repair documentation. Testing and Quality Carry out functional testing of repaired or serviced equipment. Ensure work is completed to required quality and safety standards. Workshop Control Maintain good standards of workshop organisation and housekeeping. Manage workshop stock, tools, and test equipment. Maintain existing work and test kits and assist with the preparation of new kits as required. Equipment and Product Handling Clean, check, and prepare hire equipment Carry out general repairs on returned customer equipment and systems. Test calibrated products, following documented procedures. Skills & Experience: Mechanical engineering background with hands-on workshop experience. Strong fault-finding and problem-solving skills. Ability to write clear and accurate reports. Good communication skills, both verbal and written. Reliable team player with a positive attitude. Previous experience working in a service or repair environment. Previous hydraulic equipment repair experience is highly desirable Interested, please contact Graeme at Vibe Recruitment on (phone number removed) or apply immediately Vibe Recruit is acting as an Employment Agency in relation to this vacancy.
Panel Beater Pay: £35,000-£55,000 per year Job Description: Market 36 Recruitment are currently recruiting for an experienced and reliable Panel Beater to join one of our clients based in a busy and fast-paced repair environment. This is an excellent opportunity for someone with strong vehicle body repair experience who takes pride in high-quality workmanship and attention to detail. Working Hours: Full-time contract Occasional overtime available Roles & Responsibilities: Repair damaged vehicle panels to manufacturer standards Remove and replace damaged vehicle parts Carry out panel alignment and body repairs Prepare vehicles for paintwork Work efficiently while maintaining high-quality repair standards Collaborate with workshop staff and paint technicians Follow health & safety procedures at all times Maintain a clean and organised work area Production Duties: Use hand tools and power tools relevant to vehicle body repairs Carry out detailed repair work on damaged vehicles Complete body preparation work ready for paint Work to daily repair targets and changing workshop priorities Ensure all repairs are completed accurately and efficiently Quality & Inspection: Inspect completed repairs to ensure quality standards are met Check repairs for imperfections, dents, scratches, and alignment issues Report equipment malfunctions or quality concerns promptly Maintain consistent workmanship across all repairs About You: Proven experience as a Panel Beater or Vehicle Body Repair Technician Strong knowledge of modern repair techniques Ability to work independently and as part of a team High attention to detail and commitment to quality standards Comfortable working in a fast-paced environment Full UK driving licence preferred Job Types: Full-time Permanent Benefits: Bereavement leave Free parking On-site parking Market 36 Recruitment Ltd cover a range of sectors including Commercial, Industrial, Engineering, HR & Finance & ITAD. This vacancy is being advertised by Market 36 Recruitment Ltd. We operate as an Employment Business for temporary roles and as an Employment Agency for permanent roles.
May 16, 2026
Full time
Panel Beater Pay: £35,000-£55,000 per year Job Description: Market 36 Recruitment are currently recruiting for an experienced and reliable Panel Beater to join one of our clients based in a busy and fast-paced repair environment. This is an excellent opportunity for someone with strong vehicle body repair experience who takes pride in high-quality workmanship and attention to detail. Working Hours: Full-time contract Occasional overtime available Roles & Responsibilities: Repair damaged vehicle panels to manufacturer standards Remove and replace damaged vehicle parts Carry out panel alignment and body repairs Prepare vehicles for paintwork Work efficiently while maintaining high-quality repair standards Collaborate with workshop staff and paint technicians Follow health & safety procedures at all times Maintain a clean and organised work area Production Duties: Use hand tools and power tools relevant to vehicle body repairs Carry out detailed repair work on damaged vehicles Complete body preparation work ready for paint Work to daily repair targets and changing workshop priorities Ensure all repairs are completed accurately and efficiently Quality & Inspection: Inspect completed repairs to ensure quality standards are met Check repairs for imperfections, dents, scratches, and alignment issues Report equipment malfunctions or quality concerns promptly Maintain consistent workmanship across all repairs About You: Proven experience as a Panel Beater or Vehicle Body Repair Technician Strong knowledge of modern repair techniques Ability to work independently and as part of a team High attention to detail and commitment to quality standards Comfortable working in a fast-paced environment Full UK driving licence preferred Job Types: Full-time Permanent Benefits: Bereavement leave Free parking On-site parking Market 36 Recruitment Ltd cover a range of sectors including Commercial, Industrial, Engineering, HR & Finance & ITAD. This vacancy is being advertised by Market 36 Recruitment Ltd. We operate as an Employment Business for temporary roles and as an Employment Agency for permanent roles.
We are recruiting for an experienced Air Traffic Management (ATM) Systems Engineer to join a growing Aviation Consultancy. This role is suited to an engineer with strong experience across ATM / CNS environments and a background in safety-critical systems engineering within regulated aviation domains. You will play a key role in the development, integration and assurance of complex ATM systems supporting UK and international airspace operations. The ATM Systems Engineer will be responsible for: Applying systems engineering principles across the full lifecycle (Concept, Requirements, Design, Integration, Verification & Validation, Acceptance). Develop and manage system requirements (operational, functional and performance-based). Support system architecture definition across ATM and CNS domains. Contribute to safety assessments and regulatory compliance documentation. Support integration and testing of ATM systems within operational environments. Engage with operational stakeholders, regulators and programme teams. Produce high-quality technical documentation in line with aviation standards. Essential Experience: Proven experience within Airports, Air Traffic Management, Air Traffic Control or CNS systems. Strong understanding of ATM architectures (Surveillance, Radar, ADS-B, Voice Communications, Data Processing, Flight Data Systems). Experience working within safety-critical and regulated aviation environments. Knowledge of ICAO, EUROCONTROL, EASA or UK CAA regulatory frameworks. Systems Engineering background (INCOSE-aligned approach desirable). Ability to communicate effectively with both technical and operational stakeholders. Desirable Experience: Experience supporting Airspace Modernisation or ATM transformation programmes. Familiarity with networked ATM systems and software integration. Safety assessment experience (FHA, PSSA, SSA). Model-Based Systems Engineering (MBSE) tools.
May 16, 2026
Full time
We are recruiting for an experienced Air Traffic Management (ATM) Systems Engineer to join a growing Aviation Consultancy. This role is suited to an engineer with strong experience across ATM / CNS environments and a background in safety-critical systems engineering within regulated aviation domains. You will play a key role in the development, integration and assurance of complex ATM systems supporting UK and international airspace operations. The ATM Systems Engineer will be responsible for: Applying systems engineering principles across the full lifecycle (Concept, Requirements, Design, Integration, Verification & Validation, Acceptance). Develop and manage system requirements (operational, functional and performance-based). Support system architecture definition across ATM and CNS domains. Contribute to safety assessments and regulatory compliance documentation. Support integration and testing of ATM systems within operational environments. Engage with operational stakeholders, regulators and programme teams. Produce high-quality technical documentation in line with aviation standards. Essential Experience: Proven experience within Airports, Air Traffic Management, Air Traffic Control or CNS systems. Strong understanding of ATM architectures (Surveillance, Radar, ADS-B, Voice Communications, Data Processing, Flight Data Systems). Experience working within safety-critical and regulated aviation environments. Knowledge of ICAO, EUROCONTROL, EASA or UK CAA regulatory frameworks. Systems Engineering background (INCOSE-aligned approach desirable). Ability to communicate effectively with both technical and operational stakeholders. Desirable Experience: Experience supporting Airspace Modernisation or ATM transformation programmes. Familiarity with networked ATM systems and software integration. Safety assessment experience (FHA, PSSA, SSA). Model-Based Systems Engineering (MBSE) tools.
An exciting job opportunity has arisen for a Production Manager based in Eastbourne to join a globally recognised organisation, whose solutions are a key part of many industries including electronics, medical research, renewable energy plus more. Duties of the Production Manager job based in Eastbourne include: Managing multi-discipline production teams and cells across SMT manufacturer and product assembly. Coaching team leaders Implementing Lean principles and develop action plans, complying with IS(phone number removed) Develop and implement strategies aimed at improvements to achieve cost reduction, quality improvement and systems development. Key skills and experience for the Production Manager job based in Eastbourne are: Electronics background preferred. Excellent communication skills both written and verbal. Self-starter, effective with time management and line management. The successful candidate for the Production Manager job will likely have a degree in engineering or a HNC/ HND with practical experience in implementing principles of lean manufacturing. This is an exciting job opportunity for a Production professional to join a fast growing, exciting company based in Eastbourne. APPLY NOW for the position of Production Manager, Eastbourne by sending an up-to-date CV to (url removed) or alternatively to discuss any other Manufacturing jobs please contact Ricky Wilcocks on (phone number removed)
May 16, 2026
Full time
An exciting job opportunity has arisen for a Production Manager based in Eastbourne to join a globally recognised organisation, whose solutions are a key part of many industries including electronics, medical research, renewable energy plus more. Duties of the Production Manager job based in Eastbourne include: Managing multi-discipline production teams and cells across SMT manufacturer and product assembly. Coaching team leaders Implementing Lean principles and develop action plans, complying with IS(phone number removed) Develop and implement strategies aimed at improvements to achieve cost reduction, quality improvement and systems development. Key skills and experience for the Production Manager job based in Eastbourne are: Electronics background preferred. Excellent communication skills both written and verbal. Self-starter, effective with time management and line management. The successful candidate for the Production Manager job will likely have a degree in engineering or a HNC/ HND with practical experience in implementing principles of lean manufacturing. This is an exciting job opportunity for a Production professional to join a fast growing, exciting company based in Eastbourne. APPLY NOW for the position of Production Manager, Eastbourne by sending an up-to-date CV to (url removed) or alternatively to discuss any other Manufacturing jobs please contact Ricky Wilcocks on (phone number removed)
Sheet Metal Worker / Fabricator Dartford Permanent From £16.00 per hour DOE Premier Recruitment Group are working in partnership with a well established engineering company based in Dartford who are looking to recruit two experienced Sheet Metal Worker / Fabricators to join their workshop team on a permanent basis. This is an excellent opportunity to join a professional and stable engineering environment offering consistent overtime and long term security. Pay: From £16.00 per hour, dependent on experience Hours: Monday to Thursday 7:30am - 4:00pm Friday 7:30am - 2:00pm Overtime is available at Time and a half Holiday: 20 days per annum plus bank holidays in the first year of service 25 days per annum plus bank holidays thereafter Duties and Experience Required: Experience working within a precision sheet metal environment to tolerances of +/- 0.2mm Strong workshop knowledge working with aluminium, stainless steel, and mild steel Experience operating a CNC brake press TIG and MIG welding advantageous Excellent attention to detail Ideally time served This role would suit an experienced Sheet Metal Worker / Fabricator seeking a secure, long term position within a reputable engineering company. To apply, please contact: Kirsty Cutts Premier Recruitment Group INDDART
May 16, 2026
Full time
Sheet Metal Worker / Fabricator Dartford Permanent From £16.00 per hour DOE Premier Recruitment Group are working in partnership with a well established engineering company based in Dartford who are looking to recruit two experienced Sheet Metal Worker / Fabricators to join their workshop team on a permanent basis. This is an excellent opportunity to join a professional and stable engineering environment offering consistent overtime and long term security. Pay: From £16.00 per hour, dependent on experience Hours: Monday to Thursday 7:30am - 4:00pm Friday 7:30am - 2:00pm Overtime is available at Time and a half Holiday: 20 days per annum plus bank holidays in the first year of service 25 days per annum plus bank holidays thereafter Duties and Experience Required: Experience working within a precision sheet metal environment to tolerances of +/- 0.2mm Strong workshop knowledge working with aluminium, stainless steel, and mild steel Experience operating a CNC brake press TIG and MIG welding advantageous Excellent attention to detail Ideally time served This role would suit an experienced Sheet Metal Worker / Fabricator seeking a secure, long term position within a reputable engineering company. To apply, please contact: Kirsty Cutts Premier Recruitment Group INDDART
We're seeking a skilled Escalator Service Engineer to carry out call-outs, repairs, and planned maintenance on a wide range of escalators. Escalator Service Engineer Permanent 4 on / 4 off shift pattern (12-hour shifts) Competitive Salary Greater London Escalator Service Engineer Job Description Attend breakdowns, repairs, and routine maintenance visits Work safely at all times, following health & safety procedures Deliver a high standard of service and customer care Use digital systems to log work and support first-time fixes Take part in the out-of-hours call-out rota Escalator Service Engineer Essential Experience/Skills/Qualifications Experience with escalators and/or moving walkways Strong mechanical and electrical engineering knowledge NVQ Level 3 (or working towards with good progress) Great communication and a customer-focused mindset Full UK driving licence Escalator Service Engineer Company Benefits 25 days + bank holidays Company vehicle, tools, and PPE provided Flexible working hours Voluntary Activities Cycle to work scheme Rewards scheme Life Assurance Scheme Learning and Development Opportunities Sports and Social Club If you feel you're a good fit for this position, please click 'apply'
May 16, 2026
Full time
We're seeking a skilled Escalator Service Engineer to carry out call-outs, repairs, and planned maintenance on a wide range of escalators. Escalator Service Engineer Permanent 4 on / 4 off shift pattern (12-hour shifts) Competitive Salary Greater London Escalator Service Engineer Job Description Attend breakdowns, repairs, and routine maintenance visits Work safely at all times, following health & safety procedures Deliver a high standard of service and customer care Use digital systems to log work and support first-time fixes Take part in the out-of-hours call-out rota Escalator Service Engineer Essential Experience/Skills/Qualifications Experience with escalators and/or moving walkways Strong mechanical and electrical engineering knowledge NVQ Level 3 (or working towards with good progress) Great communication and a customer-focused mindset Full UK driving licence Escalator Service Engineer Company Benefits 25 days + bank holidays Company vehicle, tools, and PPE provided Flexible working hours Voluntary Activities Cycle to work scheme Rewards scheme Life Assurance Scheme Learning and Development Opportunities Sports and Social Club If you feel you're a good fit for this position, please click 'apply'
Service Service Employment Agency Limited
Lichfield, Staffordshire
Our client, a precision engineering company based in Lichfield, is seeking an experienced CNC Turner to join their growing manufacturing team. This role focuses on producing high-precision components within a modern machining environment, working on technically challenging parts and small batch production. Key Responsibilities: Set and operate CNC turning machines to produce precision components Interpret engineering drawings and technical documentation Work to tight tolerances while maintaining high quality standards Select appropriate tooling and machining strategies Carry out first-off and in-process inspection using precision measuring equipment Work closely with engineering and quality teams to resolve machining issues Experience Required: Proven experience in CNC turning Experience with CNC controls such as FANUC, Siemens, or Mazatrol desirable Ability to read engineering drawings and work to tight tolerances Experience using precision measuring equipment Hours: Monday - Thursday: 7:30am - 4:30pm Friday: 7:30am - 11:30am (38 hours per week) This is a great opportunity to join a well-equipped engineering business working on high-precision components. Click "Apply Now " if you are ready for your next challenge.
May 16, 2026
Full time
Our client, a precision engineering company based in Lichfield, is seeking an experienced CNC Turner to join their growing manufacturing team. This role focuses on producing high-precision components within a modern machining environment, working on technically challenging parts and small batch production. Key Responsibilities: Set and operate CNC turning machines to produce precision components Interpret engineering drawings and technical documentation Work to tight tolerances while maintaining high quality standards Select appropriate tooling and machining strategies Carry out first-off and in-process inspection using precision measuring equipment Work closely with engineering and quality teams to resolve machining issues Experience Required: Proven experience in CNC turning Experience with CNC controls such as FANUC, Siemens, or Mazatrol desirable Ability to read engineering drawings and work to tight tolerances Experience using precision measuring equipment Hours: Monday - Thursday: 7:30am - 4:30pm Friday: 7:30am - 11:30am (38 hours per week) This is a great opportunity to join a well-equipped engineering business working on high-precision components. Click "Apply Now " if you are ready for your next challenge.
Radio Engineer Coax termination • Rate: £210 - per day LTD • Location- Various LU network sites • Hours - 11pm - 5am / Sunday to Thursday evening • Duration 6 months, could go on longer. Tickets required before starting - • DBS check - Within last 6 months • Facefit Ticket & mask • Asbestos awareness • Manual handling • Sentinel card - LU access. Summary: We are seeking two competent Radio Frequency (RF) Radio Engineers, who will be from a rail background, to join our team working across various London Underground (LU) network sites. The role involves night shifts from Sunday to Thursday, typically between 11pm and 5am, with hours potentially varying depending on location and job requirements. The successful candidates will be responsible for COAX termination, installing, terminating, and testing various RF cables, including 7/8 and RF cables, ensuring reliable wireless communication systems in rail environments such as tunnels, stations, and trackside areas. Key duties include designing and optimising RF coverage using Distributed Antenna Systems (DAS) and leaky feeder systems, conducting RF surveys, testing, and troubleshooting to maintain communication performance, and supporting installation, commissioning, and integration with rail telecoms technologies such as GSM-R and LTE/5G. Engineers must be familiar with schematics and have hands-on experience with coaxial cable termination, specifically SCF12, LCF12, and LCF78 connectors. Testing experience using Anritsu equipment would be an advantage, with Passive Intermodulation (PIM) testing considered a bonus. Compliance with safety and industry standards is critical, and candidates must hold valid tickets and certifications including a recent DBS check (within 6 months), Facefit ticket and mask, asbestos awareness, manual handling, and a Sentinel card for LU access. Skills: • Coax termination -proficient coax termination experience with SCF12, LCF12, and LCF78 connectors. • From a Rail background • Installation and testing of various sized RF cables (7/8 and RF cables) essential • Design, testing, and maintenance of wireless communication systems in rail environments • RF propagation, link budget calculations, and interference mitigation • Familiarity with RF schematics and documentation • Testing experience using Anritsu test equipment. • Knowledge of Passive Intermodulation (PIM) testing (advantageous) • Experience with Distributed Antenna Systems (DAS) and leaky feeder systems • Understanding of rail telecoms systems such as GSM-R and LTE/5G • Strong problem-solving skills and ability to work effectively within a team. • Software/Tools: • Anritsu RF test equipment • RF planning and design tools (e.g., iBwave, Atoll) desirable • Certifications & Standards: • DBS check (within last 6 months) • Facefit ticket and mask • Asbestos awareness • Manual handling • Sentinel card for London Underground access.
May 16, 2026
Contractor
Radio Engineer Coax termination • Rate: £210 - per day LTD • Location- Various LU network sites • Hours - 11pm - 5am / Sunday to Thursday evening • Duration 6 months, could go on longer. Tickets required before starting - • DBS check - Within last 6 months • Facefit Ticket & mask • Asbestos awareness • Manual handling • Sentinel card - LU access. Summary: We are seeking two competent Radio Frequency (RF) Radio Engineers, who will be from a rail background, to join our team working across various London Underground (LU) network sites. The role involves night shifts from Sunday to Thursday, typically between 11pm and 5am, with hours potentially varying depending on location and job requirements. The successful candidates will be responsible for COAX termination, installing, terminating, and testing various RF cables, including 7/8 and RF cables, ensuring reliable wireless communication systems in rail environments such as tunnels, stations, and trackside areas. Key duties include designing and optimising RF coverage using Distributed Antenna Systems (DAS) and leaky feeder systems, conducting RF surveys, testing, and troubleshooting to maintain communication performance, and supporting installation, commissioning, and integration with rail telecoms technologies such as GSM-R and LTE/5G. Engineers must be familiar with schematics and have hands-on experience with coaxial cable termination, specifically SCF12, LCF12, and LCF78 connectors. Testing experience using Anritsu equipment would be an advantage, with Passive Intermodulation (PIM) testing considered a bonus. Compliance with safety and industry standards is critical, and candidates must hold valid tickets and certifications including a recent DBS check (within 6 months), Facefit ticket and mask, asbestos awareness, manual handling, and a Sentinel card for LU access. Skills: • Coax termination -proficient coax termination experience with SCF12, LCF12, and LCF78 connectors. • From a Rail background • Installation and testing of various sized RF cables (7/8 and RF cables) essential • Design, testing, and maintenance of wireless communication systems in rail environments • RF propagation, link budget calculations, and interference mitigation • Familiarity with RF schematics and documentation • Testing experience using Anritsu test equipment. • Knowledge of Passive Intermodulation (PIM) testing (advantageous) • Experience with Distributed Antenna Systems (DAS) and leaky feeder systems • Understanding of rail telecoms systems such as GSM-R and LTE/5G • Strong problem-solving skills and ability to work effectively within a team. • Software/Tools: • Anritsu RF test equipment • RF planning and design tools (e.g., iBwave, Atoll) desirable • Certifications & Standards: • DBS check (within last 6 months) • Facefit ticket and mask • Asbestos awareness • Manual handling • Sentinel card for London Underground access.
Telecoms Fibre Engineer / FTTP Engineer We are hiring for an award-winning company offering exceptional telecoms fibre training & fibre engineer job opportunities. Start date of Telecoms Fibre Engineer / FTTP Engineer - Immediately Pay of Telecoms Fibre Engineer / FTTP Engineer - Telecoms fibre engineer will be working from a rate card, If you work hard and put in the effort there is no cap on their earnings. Job Description of Telecoms Fibre Engineer / FTTP Engineer : - Completing Fibre Installations - Overhead / Underground jobs - Completing Fibre Surveying / Repairing Orders - You will be given full and continuous training in this role, and support throughout your working day. - Site Inspection Evaluations Including, Traffic Management to be conducted - Respond professionally and effectively to all customer requests and enquiries Key Requirements of Telecoms Fibre Engineer / FTTP Engineer : - Full UK driver's license with no more than 6 points on. Training provided for Telecoms Fibre Engineer / FTTP Engineer : - If you are successful in your application, you first day of engagement will be at one of our national training centres to complete your training. - Full attendance every day, Monday to Friday, is mandatory, missing days is not an option, as it will affect your ability to complete the course and progress within the role into your buddy period. Telecom Fibre Engineer / FTTP Engineer physical requirements: - The ability to lift objects regularly -The ability to safely climb ladders - The ability to bend and stretch with comfort - The ability to wear personal protective gear correctly most of the day
May 16, 2026
Full time
Telecoms Fibre Engineer / FTTP Engineer We are hiring for an award-winning company offering exceptional telecoms fibre training & fibre engineer job opportunities. Start date of Telecoms Fibre Engineer / FTTP Engineer - Immediately Pay of Telecoms Fibre Engineer / FTTP Engineer - Telecoms fibre engineer will be working from a rate card, If you work hard and put in the effort there is no cap on their earnings. Job Description of Telecoms Fibre Engineer / FTTP Engineer : - Completing Fibre Installations - Overhead / Underground jobs - Completing Fibre Surveying / Repairing Orders - You will be given full and continuous training in this role, and support throughout your working day. - Site Inspection Evaluations Including, Traffic Management to be conducted - Respond professionally and effectively to all customer requests and enquiries Key Requirements of Telecoms Fibre Engineer / FTTP Engineer : - Full UK driver's license with no more than 6 points on. Training provided for Telecoms Fibre Engineer / FTTP Engineer : - If you are successful in your application, you first day of engagement will be at one of our national training centres to complete your training. - Full attendance every day, Monday to Friday, is mandatory, missing days is not an option, as it will affect your ability to complete the course and progress within the role into your buddy period. Telecom Fibre Engineer / FTTP Engineer physical requirements: - The ability to lift objects regularly -The ability to safely climb ladders - The ability to bend and stretch with comfort - The ability to wear personal protective gear correctly most of the day
Step Up. Lead. Make an Impact. Are you ready to transform operations and drive results in a fast-paced manufacturing or production environment? We're looking for an ambitious, high-potential professional with expertise in production management, continuous improvement, and health & safety leadership to join our team and shape the future of our site in Norfolk. Your Opportunity: Lead Operations with Impact As Operations Manager, you will take ownership of our site's operational performance, focusing on engineering, production, and H&S. This is a unique opportunity to drive operational excellence, foster a safe and efficient workplace, and build a high-performing team. For those who excel, there is clear potential to progress into further leadership roles within the business. Your Mission: Lead, Inspire, Deliver Lead & Inspire Teams: Motivate and empower cross-functional teams in production and engineering, building a culture of collaboration, trust, and high performance. Take Ownership: Oversee the P&L, manage budgets, and achieve ambitious operational targets while safeguarding revenue. Develop People: Mentor and coach your team to foster growth, engagement, and a highly valued workforce. Drive Continuous Improvement: Lead Lean, Six Sigma, and CI initiatives to enhance processes, boost efficiency, and embed best practices across operations. Champion Health & Safety: Maintain and elevate H&S standards, ensuring compliance and a culture where safety is a priority. IOSH or NEBOSH qualifications are a strong advantage. Shape the Future: Identify opportunities for process innovation, efficiency gains, and operational excellence, aligning daily operations with strategic goals. Deliver Exceptional Standards: Maintain high standards in production quality, engineering reliability, and operational safety. What You Bring to the Table Operations & Production Expertise: Significant experience in production or manufacturing management, with a track record of leading high-performing operational teams. Continuous Improvement Mindset: Strong experience with Lean, Six Sigma, or continuous improvement methodologies. Commercial Acumen: Skilled in managing P&L, budgets, KPIs, and operational performance metrics. Health & Safety Focus: Demonstrated commitment to H&S excellence; IOSH or NEBOSH qualifications preferred. Leadership Experience: Proven ability to motivate teams, manage performance, and deliver results in challenging operational settings. Highly Organised: Exceptional organisational skills to manage multiple priorities, processes, and teams efficiently. Project & Change Management: Comfortable leading projects and guiding teams through procedural changes. Engineering Team Leadership: Ability to manage engineers effectively; technical qualifications are not required. Career Ambition: Motivated to grow into broader leadership roles Why Join Us? Impactful Leadership: Lead a site that values operational excellence, engineering leadership, and safe working environments. Career Growth: Gain hands-on experience driving operational performance, continuous improvement, and team leadership. Incredible Culture: Be part of a resilient, results-driven team that celebrates contributions and prioritises professional development. Your Moment to Lead If you are driven, highly organised, and thrive in challenging production environments, this is your chance to make a tangible impact. Step into a leadership role where you can champion operational excellence, continuous improvement, and health & safety, while building the foundation for future leadership opportunities. Barker Ross Group values diversity and promotes equality. No terminology in this advert is intended to discriminate against any of the protected characteristics that fall under the Equality Act 2010. We encourage and welcome applications from all sections of society and are more than happy to discuss reasonable adjustments and/or additional arrangements as required to support your application. For the purposes of the Conduct Regulations 2003, when advertising permanent vacancies we are acting as an Employment Agency, and when advertising temporary/contract vacancies we are acting as an Employment Business.
May 16, 2026
Full time
Step Up. Lead. Make an Impact. Are you ready to transform operations and drive results in a fast-paced manufacturing or production environment? We're looking for an ambitious, high-potential professional with expertise in production management, continuous improvement, and health & safety leadership to join our team and shape the future of our site in Norfolk. Your Opportunity: Lead Operations with Impact As Operations Manager, you will take ownership of our site's operational performance, focusing on engineering, production, and H&S. This is a unique opportunity to drive operational excellence, foster a safe and efficient workplace, and build a high-performing team. For those who excel, there is clear potential to progress into further leadership roles within the business. Your Mission: Lead, Inspire, Deliver Lead & Inspire Teams: Motivate and empower cross-functional teams in production and engineering, building a culture of collaboration, trust, and high performance. Take Ownership: Oversee the P&L, manage budgets, and achieve ambitious operational targets while safeguarding revenue. Develop People: Mentor and coach your team to foster growth, engagement, and a highly valued workforce. Drive Continuous Improvement: Lead Lean, Six Sigma, and CI initiatives to enhance processes, boost efficiency, and embed best practices across operations. Champion Health & Safety: Maintain and elevate H&S standards, ensuring compliance and a culture where safety is a priority. IOSH or NEBOSH qualifications are a strong advantage. Shape the Future: Identify opportunities for process innovation, efficiency gains, and operational excellence, aligning daily operations with strategic goals. Deliver Exceptional Standards: Maintain high standards in production quality, engineering reliability, and operational safety. What You Bring to the Table Operations & Production Expertise: Significant experience in production or manufacturing management, with a track record of leading high-performing operational teams. Continuous Improvement Mindset: Strong experience with Lean, Six Sigma, or continuous improvement methodologies. Commercial Acumen: Skilled in managing P&L, budgets, KPIs, and operational performance metrics. Health & Safety Focus: Demonstrated commitment to H&S excellence; IOSH or NEBOSH qualifications preferred. Leadership Experience: Proven ability to motivate teams, manage performance, and deliver results in challenging operational settings. Highly Organised: Exceptional organisational skills to manage multiple priorities, processes, and teams efficiently. Project & Change Management: Comfortable leading projects and guiding teams through procedural changes. Engineering Team Leadership: Ability to manage engineers effectively; technical qualifications are not required. Career Ambition: Motivated to grow into broader leadership roles Why Join Us? Impactful Leadership: Lead a site that values operational excellence, engineering leadership, and safe working environments. Career Growth: Gain hands-on experience driving operational performance, continuous improvement, and team leadership. Incredible Culture: Be part of a resilient, results-driven team that celebrates contributions and prioritises professional development. Your Moment to Lead If you are driven, highly organised, and thrive in challenging production environments, this is your chance to make a tangible impact. Step into a leadership role where you can champion operational excellence, continuous improvement, and health & safety, while building the foundation for future leadership opportunities. Barker Ross Group values diversity and promotes equality. No terminology in this advert is intended to discriminate against any of the protected characteristics that fall under the Equality Act 2010. We encourage and welcome applications from all sections of society and are more than happy to discuss reasonable adjustments and/or additional arrangements as required to support your application. For the purposes of the Conduct Regulations 2003, when advertising permanent vacancies we are acting as an Employment Agency, and when advertising temporary/contract vacancies we are acting as an Employment Business.
Wallace Hind Selection LTD
Northampton, Northamptonshire
Are you a Sales Manager looking to grow your career with a market leading company providing temperature monitoring solutions to a wide range of sectors including Aerospace, Automotive and Food, or are you looking to develop an international sales career? Based in the UK you will have occasional travel (up to 3 months a year, usually 2 weeks per trip to the US). BASIC SALARY: £50,000 to £60,000 BENEFITS: Uncappped Bonus, paid Quarterly 25 Days Holiday & Bank Holidays Company Pension Scheme LOCATION: East Midlands / East Anglia COMMUTABLE LOCATIONS: Cambridge, Peterborough, Northampton, Welwyn Garden City, Stevenage, Lincoln, Nottingham, Leicester JOB DESCRIPTION: Sales Manager, Sales Engineer, Technical Sales, International Sales Temperature Monitoring, Technical Solutions As our Sales Manager, you ll be responsible for driving business growth to agreed targets, working with existing representatives while also developing new business opportunities. You ll receive comprehensive product training across our diverse range (AOV circa £20,000), enabling you to confidently demonstrate, sell and support our innovative industrial, industry specific solutions. KEY RESPONSIBILITIES: Sales Manager, Sales Engineer, Technical Sales, International Sales Temperature Monitoring, Technical Solutions As our Sales Manager, you will be: Visiting customers, supporting representatives and handling direct sales. Delivering technical product demonstrations and running trials at customer sites. Establishing, managing and growing key account relationships. Providing installation support, on-site training, and ongoing technical assistance. Identifying customer requirements and offering the best solutions through a consultative sales approach. Generating leads and developing new routes to market to complement our existing structure and increase brand awareness. PERSON SPECIFICATION: Sales Manager, Sales Engineer, Technical Sales, International Sales Temperature Monitoring, Technical Solutions We are looking for a driven and progressive Sales Manager, ideally with experience of selling a technical solution who has a proven track record of success and who is now looking to develop their career into an internal role, with a forward thinking company looking to grow business in the US. We re looking for someone who: Has experience of selling a technical solution, consumable or components Has proven B2B technical sales experience (capital equipment, components, services etc) Any knowledge of the Food, Automotive, Aerospace markets would be of particular interest, but not essential. Enjoys solving customer problems and building long term relationships. THE COMPANY: We are an expanding company specialising in industrial temperature measurement systems. With a strong worldwide presence and ambitious plans to accelerate overseas growth, we provide cutting-edge solutions to a wide range of industries, including heat treatment, paint finishing, and food processing. This is an exciting opportunity to join a forward-thinking business that invests in its people and offers long-term career progression. PROSPECTS: This role offers significant opportunity for an ambitious, driven, experienced professional with a desire to develop their career. It is highly likely you will have worked in any of the following roles, Sales Engineer, Technical Sales Engineer, Technical sales Manager, Export Sales, International Sales, Distributor Sales INTERESTED? Please click apply. You will receive an acknowledgement of your application. Wallace Hind Selection, alongside our client embrace diversity, champion equality, and foster inclusion to create a work environment where everyone belongs and thrives. Please Note: Wallace Hind Selection have been chosen as the retained recruitment partner of our client and therefore any direct applications to our client from candidates or agencies will be forwarded on to us direct. REF: IP18250, Wallace Hind Selection
May 16, 2026
Full time
Are you a Sales Manager looking to grow your career with a market leading company providing temperature monitoring solutions to a wide range of sectors including Aerospace, Automotive and Food, or are you looking to develop an international sales career? Based in the UK you will have occasional travel (up to 3 months a year, usually 2 weeks per trip to the US). BASIC SALARY: £50,000 to £60,000 BENEFITS: Uncappped Bonus, paid Quarterly 25 Days Holiday & Bank Holidays Company Pension Scheme LOCATION: East Midlands / East Anglia COMMUTABLE LOCATIONS: Cambridge, Peterborough, Northampton, Welwyn Garden City, Stevenage, Lincoln, Nottingham, Leicester JOB DESCRIPTION: Sales Manager, Sales Engineer, Technical Sales, International Sales Temperature Monitoring, Technical Solutions As our Sales Manager, you ll be responsible for driving business growth to agreed targets, working with existing representatives while also developing new business opportunities. You ll receive comprehensive product training across our diverse range (AOV circa £20,000), enabling you to confidently demonstrate, sell and support our innovative industrial, industry specific solutions. KEY RESPONSIBILITIES: Sales Manager, Sales Engineer, Technical Sales, International Sales Temperature Monitoring, Technical Solutions As our Sales Manager, you will be: Visiting customers, supporting representatives and handling direct sales. Delivering technical product demonstrations and running trials at customer sites. Establishing, managing and growing key account relationships. Providing installation support, on-site training, and ongoing technical assistance. Identifying customer requirements and offering the best solutions through a consultative sales approach. Generating leads and developing new routes to market to complement our existing structure and increase brand awareness. PERSON SPECIFICATION: Sales Manager, Sales Engineer, Technical Sales, International Sales Temperature Monitoring, Technical Solutions We are looking for a driven and progressive Sales Manager, ideally with experience of selling a technical solution who has a proven track record of success and who is now looking to develop their career into an internal role, with a forward thinking company looking to grow business in the US. We re looking for someone who: Has experience of selling a technical solution, consumable or components Has proven B2B technical sales experience (capital equipment, components, services etc) Any knowledge of the Food, Automotive, Aerospace markets would be of particular interest, but not essential. Enjoys solving customer problems and building long term relationships. THE COMPANY: We are an expanding company specialising in industrial temperature measurement systems. With a strong worldwide presence and ambitious plans to accelerate overseas growth, we provide cutting-edge solutions to a wide range of industries, including heat treatment, paint finishing, and food processing. This is an exciting opportunity to join a forward-thinking business that invests in its people and offers long-term career progression. PROSPECTS: This role offers significant opportunity for an ambitious, driven, experienced professional with a desire to develop their career. It is highly likely you will have worked in any of the following roles, Sales Engineer, Technical Sales Engineer, Technical sales Manager, Export Sales, International Sales, Distributor Sales INTERESTED? Please click apply. You will receive an acknowledgement of your application. Wallace Hind Selection, alongside our client embrace diversity, champion equality, and foster inclusion to create a work environment where everyone belongs and thrives. Please Note: Wallace Hind Selection have been chosen as the retained recruitment partner of our client and therefore any direct applications to our client from candidates or agencies will be forwarded on to us direct. REF: IP18250, Wallace Hind Selection
Wireless Network Engineer (Solutions Engineer) 55,000 - 65,000 + Excellent Benefits Package (Up to 43 Paid Days Off, Gym, Training, Enhanced Family Leave, Paid Charity Days, Subsidised On-Site Facilities, Free Parking and More) Farnborough, Hampshire (Office-based, hybrid after 6 months) Are you a CCNA certified Wireless Network Engineer looking to join a scaling, award-winning business where you can take technical ownership, work on genuinely interesting project-based deployments, and play a key role as the senior escalation point within a growing NOC team? This is an excellent opportunity to join a highly respected connectivity and wireless solutions provider operating in complex and challenging environments. Due to continued growth, they are expanding their Network Operations Centre and are looking for an experienced engineer to act as the technical lead for network and wireless solutions. In this role, you will sit within the NOC as the final escalation point for complex incidents, while also delivering professional services across customer sites. You will design, deploy, optimise and support wireless and network solutions, carry out Wi?Fi surveys, and contribute to high-quality project delivery across a diverse customer base. You will thrive in this role if you enjoy working in an MSP environment, take pride in service quality and customer experience, and enjoy mentoring junior engineers. In return, you will benefit from a long-term approach to development, a welcoming team culture, and one of the most generous benefits packages in the market. The Role: Acting as the senior technical escalation point within the NOC Designing, deploying and optimising wireless and network solutions Delivering professional services including installs, upgrades and migrations Conducting Wi?Fi surveys and producing technical documentation Mentoring and supporting junior engineers within the team The Person: CCNA certified (in-date not required) Strong experience with Wi?Fi and wireless networking MSP or Service Desk background preferred Ekahau experience beneficial but not essential Able to commute to Farnborough five days a week for the first six months Full UK right to work and minimum five years UK residency Reference Number: BBBH(phone number removed) Rise Technical Recruitment Ltd acts an employment agency for permanent roles and an employment business for temporary roles. The salary advertised is the bracket available for this position. The actual salary paid will be dependent on your level of experience, qualifications and skill set and will be decided by our client, the employer. Rise are not responsible or liable for any hiring decisions made by the end client. We are an equal opportunities company and welcome applications from all suitable candidates.
May 16, 2026
Full time
Wireless Network Engineer (Solutions Engineer) 55,000 - 65,000 + Excellent Benefits Package (Up to 43 Paid Days Off, Gym, Training, Enhanced Family Leave, Paid Charity Days, Subsidised On-Site Facilities, Free Parking and More) Farnborough, Hampshire (Office-based, hybrid after 6 months) Are you a CCNA certified Wireless Network Engineer looking to join a scaling, award-winning business where you can take technical ownership, work on genuinely interesting project-based deployments, and play a key role as the senior escalation point within a growing NOC team? This is an excellent opportunity to join a highly respected connectivity and wireless solutions provider operating in complex and challenging environments. Due to continued growth, they are expanding their Network Operations Centre and are looking for an experienced engineer to act as the technical lead for network and wireless solutions. In this role, you will sit within the NOC as the final escalation point for complex incidents, while also delivering professional services across customer sites. You will design, deploy, optimise and support wireless and network solutions, carry out Wi?Fi surveys, and contribute to high-quality project delivery across a diverse customer base. You will thrive in this role if you enjoy working in an MSP environment, take pride in service quality and customer experience, and enjoy mentoring junior engineers. In return, you will benefit from a long-term approach to development, a welcoming team culture, and one of the most generous benefits packages in the market. The Role: Acting as the senior technical escalation point within the NOC Designing, deploying and optimising wireless and network solutions Delivering professional services including installs, upgrades and migrations Conducting Wi?Fi surveys and producing technical documentation Mentoring and supporting junior engineers within the team The Person: CCNA certified (in-date not required) Strong experience with Wi?Fi and wireless networking MSP or Service Desk background preferred Ekahau experience beneficial but not essential Able to commute to Farnborough five days a week for the first six months Full UK right to work and minimum five years UK residency Reference Number: BBBH(phone number removed) Rise Technical Recruitment Ltd acts an employment agency for permanent roles and an employment business for temporary roles. The salary advertised is the bracket available for this position. The actual salary paid will be dependent on your level of experience, qualifications and skill set and will be decided by our client, the employer. Rise are not responsible or liable for any hiring decisions made by the end client. We are an equal opportunities company and welcome applications from all suitable candidates.
OUTSIDE IR35 CONTRACT ECS Resource Group are currently working in partnership with a global managed service provider, assisting them with the search for a Service Designer on a contract basis. Key Responsibilities: Lead end-to end service design within a telecommunications environment, focusing on improving customer and network service experiences Design and optimise services across fixed connectivity and mobile network products, ensuring seamless user and technical integration Apply understanding of mobile network configurations, including APN settings, to support reliable data connectivity and service performance Collaborate with network engineers, product managers, and operations teams to translate technical capabilities into customer-centric services Identify and resolve service experience issues across connectivity journeys, from onboarding through to ongoing usage and support Key Skills: Extensive experience working within the telecommunications (Telco) industry Proven expertise as a Senior Service Designer delivering complex, end-to-end service improvements Strong knowledge of fixed connectivity products and underlying infrastructure (e.g., broadband, fibre, or enterprise connectivity) Solid understanding of mobile networks, including Access Point Name (APN) configuration and its role in enablingdata, MMS, and network access across public and private networks Ability to bridge technical network concepts with customer experience design, including stakeholder management across technical and non-technical teams Further details available upon application. ECS Recruitment Group Ltd is acting as an Employment Business in relation to this vacancy.
May 16, 2026
Contractor
OUTSIDE IR35 CONTRACT ECS Resource Group are currently working in partnership with a global managed service provider, assisting them with the search for a Service Designer on a contract basis. Key Responsibilities: Lead end-to end service design within a telecommunications environment, focusing on improving customer and network service experiences Design and optimise services across fixed connectivity and mobile network products, ensuring seamless user and technical integration Apply understanding of mobile network configurations, including APN settings, to support reliable data connectivity and service performance Collaborate with network engineers, product managers, and operations teams to translate technical capabilities into customer-centric services Identify and resolve service experience issues across connectivity journeys, from onboarding through to ongoing usage and support Key Skills: Extensive experience working within the telecommunications (Telco) industry Proven expertise as a Senior Service Designer delivering complex, end-to-end service improvements Strong knowledge of fixed connectivity products and underlying infrastructure (e.g., broadband, fibre, or enterprise connectivity) Solid understanding of mobile networks, including Access Point Name (APN) configuration and its role in enablingdata, MMS, and network access across public and private networks Ability to bridge technical network concepts with customer experience design, including stakeholder management across technical and non-technical teams Further details available upon application. ECS Recruitment Group Ltd is acting as an Employment Business in relation to this vacancy.
Location: Knaresborough, HG5 Pay Rate: £15.23 per hour Contract: Temporary to Permanent Opportunity Shift Pattern: 12-hour day and night shifts We are currently recruiting for a Crane Operator to join a busy waste recovery and processing site based in Knaresborough. Full training will be provided, so previous overhead crane experience is not essential. This is an excellent opportunity for candidates with plant, production, manufacturing, warehouse, recycling, or heavy industrial experience looking to develop new skills in a long-term role. This position involves working a favourable 35-day shift cycle, consisting of 14 working days and 21 non-working days. Key Responsibilities: Carrying out daily safety and operational checks on machinery Operating overhead grab cranes safely and efficiently Moving and loading materials around the site Working closely with operational teams to maintain plant performance Reporting faults and assisting with minor maintenance tasks Maintaining accurate operational records and shift handovers Supporting maintenance teams and service engineers when required Ensuring high standards of housekeeping and site safety Skills and Experience: Strong communication and teamwork skills Ability to remain calm under pressure Good attention to detail and spatial awareness Reliable, punctual, and flexible with shift work Ability to work at heights and in an industrial environment Previous experience within manufacturing, production, plant operations, recycling, or similar environments would be advantageous If you are interested in the role, please apply with your CV today.
May 16, 2026
Full time
Location: Knaresborough, HG5 Pay Rate: £15.23 per hour Contract: Temporary to Permanent Opportunity Shift Pattern: 12-hour day and night shifts We are currently recruiting for a Crane Operator to join a busy waste recovery and processing site based in Knaresborough. Full training will be provided, so previous overhead crane experience is not essential. This is an excellent opportunity for candidates with plant, production, manufacturing, warehouse, recycling, or heavy industrial experience looking to develop new skills in a long-term role. This position involves working a favourable 35-day shift cycle, consisting of 14 working days and 21 non-working days. Key Responsibilities: Carrying out daily safety and operational checks on machinery Operating overhead grab cranes safely and efficiently Moving and loading materials around the site Working closely with operational teams to maintain plant performance Reporting faults and assisting with minor maintenance tasks Maintaining accurate operational records and shift handovers Supporting maintenance teams and service engineers when required Ensuring high standards of housekeeping and site safety Skills and Experience: Strong communication and teamwork skills Ability to remain calm under pressure Good attention to detail and spatial awareness Reliable, punctual, and flexible with shift work Ability to work at heights and in an industrial environment Previous experience within manufacturing, production, plant operations, recycling, or similar environments would be advantageous If you are interested in the role, please apply with your CV today.
Telecoms Fibre Engineer / FTTP Engineer We are hiring for an award-winning company offering exceptional telecoms fibre training & fibre engineer job opportunities. Start date of Telecoms Fibre Engineer / FTTP Engineer - Immediately Pay of Telecoms Fibre Engineer / FTTP Engineer - Telecoms fibre engineer will be working from a rate card, If you work hard and put in the effort there is no cap on their earnings. Job Description of Telecoms Fibre Engineer / FTTP Engineer : - Completing Fibre Installations - Overhead / Underground jobs - Completing Fibre Surveying / Repairing Orders - You will be given full and continuous training in this role, and support throughout your working day. - Site Inspection Evaluations Including, Traffic Management to be conducted - Respond professionally and effectively to all customer requests and enquiries Key Requirements of Telecoms Fibre Engineer / FTTP Engineer : - Full UK driver's license with no more than 6 points on. Training provided for Telecoms Fibre Engineer / FTTP Engineer : - If you are successful in your application, you first day of engagement will be at one of our national training centres to complete your training. - Full attendance every day, Monday to Friday, is mandatory, missing days is not an option, as it will affect your ability to complete the course and progress within the role into your buddy period. Telecom Fibre Engineer / FTTP Engineer physical requirements: - The ability to lift objects regularly -The ability to safely climb ladders - The ability to bend and stretch with comfort - The ability to wear personal protective gear correctly most of the day
May 16, 2026
Full time
Telecoms Fibre Engineer / FTTP Engineer We are hiring for an award-winning company offering exceptional telecoms fibre training & fibre engineer job opportunities. Start date of Telecoms Fibre Engineer / FTTP Engineer - Immediately Pay of Telecoms Fibre Engineer / FTTP Engineer - Telecoms fibre engineer will be working from a rate card, If you work hard and put in the effort there is no cap on their earnings. Job Description of Telecoms Fibre Engineer / FTTP Engineer : - Completing Fibre Installations - Overhead / Underground jobs - Completing Fibre Surveying / Repairing Orders - You will be given full and continuous training in this role, and support throughout your working day. - Site Inspection Evaluations Including, Traffic Management to be conducted - Respond professionally and effectively to all customer requests and enquiries Key Requirements of Telecoms Fibre Engineer / FTTP Engineer : - Full UK driver's license with no more than 6 points on. Training provided for Telecoms Fibre Engineer / FTTP Engineer : - If you are successful in your application, you first day of engagement will be at one of our national training centres to complete your training. - Full attendance every day, Monday to Friday, is mandatory, missing days is not an option, as it will affect your ability to complete the course and progress within the role into your buddy period. Telecom Fibre Engineer / FTTP Engineer physical requirements: - The ability to lift objects regularly -The ability to safely climb ladders - The ability to bend and stretch with comfort - The ability to wear personal protective gear correctly most of the day
Metal Finisher/Fettler (Friday's Off) Truro 13.45 Per Hour + Career Progression + In-House Training + 4-Day Working Week + Friday's Off + Optional Overtime Are you a Metal Finisher or similar, or have experience Metal Finishing or Fettling, looking for a hands-on and fast paced role at an internationally recognized Agricultural Machinery Manufacturer, that offers a 4-Day Working Week with Friday's off? Do you want to work in a large but organised and clean workshop environment, for an industry leading Agricultural Machinery Manufacturer, who are renowned for their high-quality products, with the added benefits of a 4-Day Working Week with Friday's off and overtime earning potential? On offer is the chance to become a key player in a reputable and renowned Agricultural Machinery Manufacturer, who distribute their products to a variety of clients across all continents, who are known for their great staff retention rate and great employee benefits. In this role you will be responsible for general Metal Finishing duties ensuring metal parts/welded fabrications are of high quality. You will be using power/hand tools as well as machinery to grind, deburr, and remove/clean marks and rough bits on metal parts/welded fabrications. This role would suit a Metal Finisher or similar, or someone with experience Fettling or Metal Finishing, looking for a stable and fast-paced role at an industry-leading Manufacturer, with the added benefits of a 4-Day Working Week with Fridays off, and overtime earning potential. The Role General Metal Finishing duties to metal parts/welded fabrications Using hand/power tools and machinery to grind, deburr and remove marks from metal parts/welded fabrications The Person Metal Finisher or similar, or someone with experience Fettling or Metal Finishing Competent with hand/power tools Commutable distance to Truro BBBH24824EC Key Words: Fettler, Fettling, Metal Finishing, Metal, Finishing, Engineering, Hand Tools, Power Tools, Agriculture, Agricultural, Engineering, Engineer, Manufacturer, Machinery, Blackwater, Truro, Redruth, Camborne If you are interested in this role, click 'Apply Now' to forward an up-to-date copy of your CV. We are an equal opportunities employer and welcome applications from all suitable candidates. The salary advertised is a guideline for this position. The offered remuneration will be dependent on the extent of your experience, qualifications, and skill set. Ernest Gordon Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job, you accept the T&C's, Privacy Policy and Disclaimers which can be found on our website.
May 16, 2026
Full time
Metal Finisher/Fettler (Friday's Off) Truro 13.45 Per Hour + Career Progression + In-House Training + 4-Day Working Week + Friday's Off + Optional Overtime Are you a Metal Finisher or similar, or have experience Metal Finishing or Fettling, looking for a hands-on and fast paced role at an internationally recognized Agricultural Machinery Manufacturer, that offers a 4-Day Working Week with Friday's off? Do you want to work in a large but organised and clean workshop environment, for an industry leading Agricultural Machinery Manufacturer, who are renowned for their high-quality products, with the added benefits of a 4-Day Working Week with Friday's off and overtime earning potential? On offer is the chance to become a key player in a reputable and renowned Agricultural Machinery Manufacturer, who distribute their products to a variety of clients across all continents, who are known for their great staff retention rate and great employee benefits. In this role you will be responsible for general Metal Finishing duties ensuring metal parts/welded fabrications are of high quality. You will be using power/hand tools as well as machinery to grind, deburr, and remove/clean marks and rough bits on metal parts/welded fabrications. This role would suit a Metal Finisher or similar, or someone with experience Fettling or Metal Finishing, looking for a stable and fast-paced role at an industry-leading Manufacturer, with the added benefits of a 4-Day Working Week with Fridays off, and overtime earning potential. The Role General Metal Finishing duties to metal parts/welded fabrications Using hand/power tools and machinery to grind, deburr and remove marks from metal parts/welded fabrications The Person Metal Finisher or similar, or someone with experience Fettling or Metal Finishing Competent with hand/power tools Commutable distance to Truro BBBH24824EC Key Words: Fettler, Fettling, Metal Finishing, Metal, Finishing, Engineering, Hand Tools, Power Tools, Agriculture, Agricultural, Engineering, Engineer, Manufacturer, Machinery, Blackwater, Truro, Redruth, Camborne If you are interested in this role, click 'Apply Now' to forward an up-to-date copy of your CV. We are an equal opportunities employer and welcome applications from all suitable candidates. The salary advertised is a guideline for this position. The offered remuneration will be dependent on the extent of your experience, qualifications, and skill set. Ernest Gordon Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job, you accept the T&C's, Privacy Policy and Disclaimers which can be found on our website.
My client are in need of a contract PMO Manager for an initial 6 month contract to help with their ongoing Digital Transformations. The role will be hybrid, with 2 days on-site per week and will be inside Ir35. Experience required: - minimum of 5 years working in PMO funcitons - Experience of managing sizeable teams within a PMO - Strong Stakeholder experience - Ideally worked with technical teams, especially DevOps engineers - RAID Log expertise
May 16, 2026
Contractor
My client are in need of a contract PMO Manager for an initial 6 month contract to help with their ongoing Digital Transformations. The role will be hybrid, with 2 days on-site per week and will be inside Ir35. Experience required: - minimum of 5 years working in PMO funcitons - Experience of managing sizeable teams within a PMO - Strong Stakeholder experience - Ideally worked with technical teams, especially DevOps engineers - RAID Log expertise
