80 jobs found

Graduate Energy Modeller / Airtightness Bradford 28,000+ (DOE) Bradford area Are you a recent graduate or at the beginning of your career with a passion for sustainability, energy efficiency, and building performance? This is a fantastic opportunity to join a well-established consultancy known for its expertise in building performance, compliance, and sustainable design. This role offers a structured development pathway where you'll build your skills in energy modelling, regulatory compliance, and airtightness testing, while contributing to innovative, low-carbon building solutions. The Role As a Graduate Energy Modeller, you'll support the delivery of sustainable and energy-efficient building projects. Working closely with experienced engineers, you'll gain practical experience across modelling, analysis, and on-site testing. This position is ideal for someone looking to begin a career in building physics and environmental design. What's on Offer Starting salary from 28,000+ (depending on experience) Structured training programme with clear progression opportunities Exposure to a wide variety of projects across multiple sectors Collaborative and supportive team environment Opportunity to contribute to net-zero and sustainable design initiatives Key Responsibilities Assist with energy modelling to evaluate building performance and efficiency Support on-site airtightness testing and data collection Contribute to ensuring compliance with Part L and other building regulations Produce technical reports and develop 3D models for project delivery Work closely with engineers and consultants on live projects Day-to-Day Duties Carry out building performance analysis using industry-standard software Visit project sites to assist with testing and surveys Use tools such as Bluebeam for measurements and scaling Create models using software including IES and SketchUp Attend team meetings and training sessions to develop your knowledge About You Degree in Mechanical Engineering, Building Services, Architecture, or similar Exposure to IES software through studies or placement experience Strong interest in sustainability and building performance Eager to learn, with a proactive and positive attitude Apply Now Looking to kickstart your career in building physics and make a real impact in sustainable design? We'd love to hear from you-apply today and take the next step in your career.

Applications Engineer Salary: Competitive + Bonus + Pension (4%) + Hybrid Working + Training & Progression Location: Cheshire Are you an ambitious engineering graduate with 1-2+ years' industry experience, looking to accelerate your career in a high-growth, cutting-edge engineering business? We are working with a rapidly expanding UK-based engineering specialist operating at the forefront of electromechanical systems, motion control and advanced engineering solutions. Supporting industries such as aerospace, defence, subsea and industrial automation, this business offers a unique opportunity to work on high-value, technically challenging projects with real-world impact. The Role This is a fantastic opportunity to step into a hybrid Applications / Technical Sales Engineering role, where you will act as the link between customers, sales and engineering teams. You will be: Supporting customers with technical enquiries and product selection Producing quotes and proposals for a range of engineering solutions Working on projects ranging from standard products to bespoke engineered systems Collaborating with internal engineering teams to develop tailored solutions Building your commercial awareness in a consultative, customer-facing environment This role offers a unique blend of hands-on engineering knowledge and commercial exposure , ideal for someone looking to broaden their career beyond pure design or manufacturing. About You Qualified in a Mechanical, Electrical, Mechatronics or similar engineering discipline. 1-2+ years' experience in an engineering environment (placement year considered) Strong interest in how engineering solutions are applied in real-world scenarios Confident communicator with a proactive, can-do attitude Keen to learn and develop within a fast-paced, customer-focused environment Experience or interest in motion control, automation or mechanical systems would be advantageous but not essential. Why Join? Work on exciting, real engineering projects - from catalogue solutions through to fully bespoke systems Fast-track your development in a growing SME where your contribution is visible and valued Structured progression into technical specialist, engineering or commercial career paths Exposure to multiple industries - aerospace, defence, marine, oil & gas and more Collaborative, supportive culture with direct access to experienced engineers and leadership Ongoing training & development in specialist technologies and customer applications If you're looking for a role where you can develop quickly, work on exciting projects and build a long-term engineering career, we'd love to hear from you. Unfortunately, this company does not hold a licence to provide sponsorship At Morgan Ryder we can provide you with a full range of employment opportunities from short term and fixed term temporary vacancies to permanent positions. We recruit for companies that operate in the following industries: Defence Equipment, Food and Drink Manufacturers, FMCG, Packaging, Engineering, Automotive, Aerospace, Warehousing, Logistics, Waste Management, Petro Chemical, Pharmaceutical, Power & Renewable Energy. Our commitment: Equal opportunities are important to us. We believe that diversity and inclusion at Morgan Ryder Associates are critical to our success as DE&I positive company, so we want to recruit, develop, and keep the best talent. We encourage applications from everyone, regardless of background, gender identity, sexual orientation, disability status, ethnicity, belief, age, family or parental status, and any other characteristic. Please note that calls to and from the offices of Morgan Ryder Associates Ltd. may be monitored or recorded. This is to ensure compliance with regulatory procedures, record business transactions and for training purposes.

Seeking a skilled Senior Test Engineer with expertise in space propulsion. Responsible for overseeing firing site operations, including site preparation, maintenance, fuel and oxidizer handling, pressure systems. Key Responsibilities Design and manufacture of liquid propellant and high-pressure gas feed systems. Advanced training provision in key operational skills on firing sites. Proficient analysis and assessment of test data, producing high-quality analysis material. Adherence to COMAH controlled testing standards. Minimum Requirements: Mechanical fitter or practical engineering skills Ideally qualified to OU or equivalent graduate level course in engineering. Level 4 training on the Skills and Competency Matrix with in-depth experience.

Junior IT Business Systems Advisor (Graduate / Early-Career Opportunity) £23 per hour Inside IR35 On-site, Birmingham (5 days per week - must live within 30 minutes of Coleshill B46) Want a career where tech meets real-world manufacturing - not just screens and spreadsheets? This is a hands-on graduate role based at a leading manufacturing plant for an iconic global brand in Birmingham. You'll be on site every day, learning how large-scale systems actually run, supported by a friendly team who expect you to ask questions, learn fast, and grow into the role.This is a starter role with a future - designed to help you build confidence, experience, and direction in IT and systems within an automotive manufacturing environment. What you'll learn on the jobYou don't need to know all of this yet - that's the point. You'll be trained and supported while learning how to: Support and improve business and IT systems used on a live manufacturing site Understand how incidents, problems, and system changes are handled in the real world Get involved in small projects and change releases Use reporting and tracking to understand what's working (and what isn't) Learn IT service management (ITIL / ITSM) in both Agile and Waterfall environments Work with tools like Confluence, MS tools (including AI), and service dashboards Get exposure to SQL, testing, and data analysis Take part in workshops and collaborate with teams across the site This is practical, hands-on learning - not classroom theory. Who this is perfect forThis role is ideal if you're a graduate or early-career professional (0-2 years' experience) who wants to build a career, not just get a job.You'll suit this role if you: Have (or are finishing) a degree in something like: Mechanical, Automotive, or Manufacturing Engineering Business Analysis or Project Management Information Systems, IT, Data, or Engineering-related subjects Are curious and comfortable asking questions Communicate well and enjoy working with people Want to understand how systems support real-world operations Are keen to be on site, learn fast, and build strong foundations Attitude, communication, curiosity, and willingness to learn matter more than experience. What this role is notTo be clear (and fair), this role is not: A senior, specialist, or expert-level IT role A role for experienced developers, architects, or consultants A remote or hybrid position (you'll be on site to learn properly) A role where you're expected to already know everything If you have several years of experience and are looking for autonomy from day one, this role likely won't be the right fit. The environment & progression Fully on-site in Birmingham (5 days per week) Friendly, down-to-earth manufacturing environment Lots of support, mentoring, and learning time built in Clear progression toward more specialist IT, systems, or analysis roles If you're early in your career and want to learn how tech really works inside a major manufacturing operation, this is a brilliant place to start. Hays Specialist Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job you accept the T&C's, Privacy Policy and Disclaimers which can be found at hays.co.uk

Senior Power Systems Engineer Our client, a leading consultancy in the power distribution sector, is currently seeking a Senior Power Systems Engineer to join their team in Manchester. This permanent role involves executing the electro-mechanical design of substations, leading multidisciplinary teams, and ensuring solutions meet client requirements, legislation, and industry standards. The role spans a wide range of local and international projects for commercial, industrial, and utility clients. Key Responsibilities: Designing power systems up to 132 kV, with preference for experience up to 400 kV Leading the engineering of utility substations, including primary design and protection & control design Developing SCADA systems and creating single-line diagrams and substation layouts Selecting and calculating CT/VTs, and managing auxiliary AC/DC power systems Preparing technical reports and client documentation Assessing broader system contexts and understanding cross-disciplinary impacts Mentoring and developing graduate engineers and consultants Job Requirements: Experience in transmission and distribution engineering Strong knowledge of UK electrical engineering standards and regulations Extensive utility substation engineering experience Excellent written and verbal communication skills Understanding of SCADA system design and development Experience with substation safety and access training Ability to support business development and consulting activities Experience in installation and commissioning activities (desirable) Preferred Skills and Attributes: Professional registration as an Incorporated Engineer (IEng) with the Engineering Council Relevant Health & Safety qualifications (e.g., IOSH, NEBOSH) Good understanding of UK environmental and waste management legislation Strong team collaboration skills and experience in knowledge sharing Benefits: 25 days' annual leave plus bank holidays with an option to purchase additional holiday Up to 12 smart-working days per month (post-probation) Support for Military Reservists with 10 additional paid days Healthcare cover (family members can be added at extra cost) 6% matched pension and life assurance Professional development support to achieve chartership Payment of professional membership fees Cycle-to-work scheme and employee perks, including retail discounts Generous recruitment referral bonus Four half-days of paid leave for STEM Ambassador activities Season ticket loan If you are an experienced Senior Power Systems Engineer looking for a new opportunity to further develop your career, we would love to hear from you. Apply now to join our client's dynamic and talented team in Manchester.

Job Description About the Role NOV Fiber Glass Systems UK Ltd is seeking a Graduate Engineer to join our Plymouth engineering team in a full-time position commencing in July 2026. This role is ideally suited to a graduate with an interest or background in structural or composite engineering who is eager to develop practical engineering design experience within a leading global organisation. Reporting to the Senior Engineering Manager, the successful candidate will support a variety of projects across the Civil, Construction, and Oil & Gas sectors. The role offers exposure to structural calculations, product design, finite element analysis, technical documentation, and innovative engineering solutions, alongside sponsored professional development through MSc to Chartered Engineer (CEng) progression. About the Company NOV Fiber Glass Systems UK Ltd designs, manufactures, and installs advanced composite and thermoplastic solutions for a broad range of industries, including Oil & Gas, Marine & Offshore, Waste Water, and Naval sectors. Bespoke systems are engineered to meet customer-specific requirements while maintaining high standards of safety, quality, and innovation. As part of NOV, a globally recognised leader in energy industry technology and services, we are committed to delivering engineering excellence and supporting the development of future talent. What We Offer Opportunity to join an industry-leading engineering business Exposure to diverse and technically challenging projects Structured development and mentoring from experienced engineering professionals Sponsored progression through MSc to Chartered Engineer (CEng) status Career development opportunities within a global organisation Collaborative and professional working environment Hands-on experience with advanced engineering technologies and methodologies Key Responsibilities Essential Responsibilities Provide engineering support across structural and civil engineering activities, including structural calculations, laminate and joint design, finite element analysis (FEA), structural system design, and product innovation. Produce draft engineering designs for review by the Senior Engineering Manager. Revise and correct engineering designs for client review under the direction of the Senior Engineering Manager. Prepare technical documentation for approval. Complete NOV software, technical, and general training requirements. Support additional engineering and operational activities as required by the business and line management. Qualifications & Skills Essential Qualifications Degree in Structural Engineering, Civil Engineering, Mechanical Engineering, Composite Engineering, or a related discipline, ensures strong foundational engineering knowledge. Engineering fundamentals: Strong understanding of mechanics, stress analysis principles, technical drawing (3D CAD proficiency), materials science with some knowledge of fibre reinforced composite materials and related manufacturing methods Ability to manage workload effectively and prioritise tasks to meet deadlines. Good written and verbal communication skills for technical reporting and collaboration. Proficiency in Microsoft Office and willingness to learn specialist engineering software and tools. Desired Qualifications Exposure to Finite Element Analysis (FEA) software or structural design tools. Knowledge of composite materials and structural systems. Previous internship, placement, or project experience within engineering or manufacturing environments. Understanding of engineering standards, regulations, and best practices relevant to Civil, Construction, or Oil & Gas sectors. Soft Skills Strategic thinker with the ability to quickly learn and adapt to new challenges. Strong customer focus with commitment to internal and external stakeholder support. Collaborative team player who works effectively with peers to solve problems. Professional and confident communicator in both written and verbal interactions. Self-motivated with a commitment to continuous learning and career development. Able to exercise sound judgement while working under pressure and within deadlines. Positive attitude toward challenges and continuous improvement opportunities. Why Join Us? Join our Global Family: We offer an inspiring place to work with great opportunities to develop your skills and the opportunity to work with the brightest minds in the oil and gas industry. You will become part of a professional culture where we work together in teams with other dedicated professionals to achieve common goals. At NOV, we are committed to supporting your personal, financial, and professional wellbeing. Our comprehensive benefits package includes: Health & Wellbeing Private Medical Insurance Employee Assistance Programme (EAP) Finance & Protection Pension Plan Income Protection Life Assurance Personal Accident Coverage Flexible Benefits (via salary sacrifice options for you and your family) Dental Insurance Healthcare Cash Plan Partner Life Assurance Critical Illness Cover Retail Vouchers Gym Membership Cycle to Work Scheme Travel Insurance About Us Every day, the oil and gas industry's best minds put more than 150 years of experience to work to help our customers achieve lasting success. We Power the Industry that Powers the World Throughout every region in the world and across every area of drilling and production, our family of companies has provided the technical expertise, advanced equipment, and operational support necessary for success-now and in the future. Global Family We are a global family of thousands of individuals, working as one team to create a lasting impact for ourselves, our customers, and the communities where we live and work. Purposeful Innovation Through purposeful business innovation, product creation, and service delivery, we are driven to power the industry that powers the world better. Service Above All This drives us to anticipate our customers' needs and work with them to deliver the finest products and services on time and on budget. About the Team

Position: Embedded Software Engineer Location: Manchester Salary: Up to 45,000 + benefits An exciting new position has now been created for an Embedded Software Engineer to join our growing start up client's team, working out of their brand-new offices in the South Manchester area. Our client is working towards the 2nd generation of their cutting-edge medical device and are looking to expand their engineering team. They are seeking an embedded software engineer with previous medical devices and medical standards (IEC62304) experience who will play a pivotal role in the engineering team. Key Skills and Experience Required: Embedded C programming STM32 Microcontrollers Medical device and medical standards experience - IEC62304 ideally Degree qualified - Computer Science or similar In this role you will be responsible for the development of firmware and related software for the next and future generations of their devices, you will report directly to the Technical Director and can expect to work closely with other engineers (mechanical, electronics and test). In this role you can expect plenty of variety in your daily tasks, the autonomy to manage your own workload and can expect your core responsibilities to include: The design and development of firmware on SMT32 microcontrollers The design and development of software for embedded controls and firmware interfaces Writing embedded level software in C System integration and integration testing Conducting unit testing and participating in software validation processes Producing accurate and detailed documentation This role will best suit a graduate qualified Embedded Software Engineer with a few years industry experience who is keen to join an exciting startup. You will have the chance to work with passionate engineers towards the development of a state-of-the-art medical device that will make a positive impact in people's lives around the globe. Desirable Skills and Experience: C++, Python or C# Azure, Aws or Google Cloud interfacing GitHub or TFS Apply today for this fantastic Embedded Software Engineer opportunity with an up-to-date CV or contact Laurence Powell at KO2 Embedded Recruitment Solutions for more details.

Job Description About the Role We are looking for a Mechanical Design Engineer to join our Manchester based team. This role will support the design and development of engineered products and systems, ensuring solutions are robust, compliant, and fit for purpose. The successful candidate will be responsible for delivering design work from concept through to manufacture, working closely with internal teams including Production, Projects, and Procurement to ensure designs meet operational and customer requirements. This is not a graduate or entry level role, and candidates should have prior experience delivering design work within an engineering or manufacturing environment. About the Company NOV is a global leader in providing technology-driven solutions to the energy industry. We deliver innovative equipment and components used in oil and gas drilling and production operations, industrial and renewable sectors. Our commitment to excellence drives us to constantly evolve and enhance our product offerings to better serve our customers worldwide. What We Offer Opportunity to work on diverse and exciting engineering projects Collaborative, inclusive, and innovative work environment Professional growth and development opportunities Access to cutting-edge tools and technologies Key Responsibilities Maintain a strong awareness of global market trends and demands Innovate, design, and develop customer-centric equipment solutions Simplify new and existing product designs to reduce costs and improve production throughput Conduct engineering analyses such as FEA and hand calculations to support modifications and upgrades Produce and review mechanical engineering documentation Ensure all outputs comply with company policies and regulatory standards Participate in internal design reviews and understand their commercial implications Maintain thorough and accurate project documentation Adhere to internal checking, approval, and Engineering Change Procedures Prioritize customer care and uphold quality standards Investigate and resolve engineering queries in a timely and technically sound manner Qualifications & Skills HND in an Engineering discipline or equivalent (Essential) Tertiary education in an Engineering discipline (Desirable) Proficient in 3D CAD software for engineering design and drawings Strong understanding of mechanical engineering principles and related calculations Familiarity with Design for Manufacture, Assembly, and Maintenance Knowledge of industry materials and their applications Understanding of regulatory standards including Machinery (Safety) Directive, PED, ATEX, and REACH Proficient in Microsoft Excel, Word, and Outlook Additional Information This is not a graduate or entry level role Candidates should have prior experience delivering design work within an engineering or manufacturing environment Why Join Us? Join our Global Family At NOV, we are committed to supporting your personal, financial, and professional wellbeing. Our comprehensive benefits package includes: Health & Wellbeing Private Medical Insurance Employee Assistance Programme (EAP) Finance & Protection Pension Plan Income Protection Life Assurance Personal Accident Coverage Flexible Benefits (via salary sacrifice options for you and your family) Dental Insurance Healthcare Cash Plan Partner Life Assurance Critical Illness Cover Retail Vouchers Gym Membership Cycle to Work Scheme Travel Insurance About Us Every day, the oil and gas industry's best minds put more than 150 years of experience to work to help our customers achieve lasting success. We Power the Industry that Powers the World Throughout every region in the world and across every area of drilling and production, our family of companies has provided the technical expertise, advanced equipment, and operational support necessary for success-now and in the future. Global Family We are a global family of thousands of individuals, working as one team to create a lasting impact for ourselves, our customers, and the communities where we live and work. Purposeful Innovation Through purposeful business innovation, product creation, and service delivery, we are driven to power the industry that powers the world better. Service Above All This drives us to anticipate our customers' needs and work with them to deliver the finest products and services on time and on budget. About the Team Corporate Our family of companies is supported by our global Corporate teams, providing expert knowledge from functions including Human Resources, Information Technology, Compliance, Finance, QHSE, Marketing and Legal centers of expertise. We are structured to provide guidance and service above all to all our business operations.

Looking for your first design job in the built environment? How about joining a building services design consultancy where your designs can make buildings come to life. Their Runcorn office has a Director, a mechanical engineer and an electrical engineer ready to mentor you helping your development into a capable engineer. You'll receive technical training both on courses and on the job. Learning how to use design software and understanding what mechanical services solve design problems for buildings such as offices, homes and schools. What you'll be doing: Drawing mechanical services such as heating, ventilation and air conditioning using an AutoCad package Learning how to size pumps and ducts which will enable you to select the right equipment to enable buildings to be heated, ventilated and aier conditioned. Going to site with senior staff members to learn how the construction process works and where design integrates with other disciplines You will receive support from senior engineers and assist with project delivery on a variety of schemes including residential and commercial projects. The company The company have a very strong client base and offer a very flexible working environment. This opportunity comes with a clear career path with a well structured team to support you through your development. You will have the chance to use the latest software AutoCad and other design packages. The company have been steadily expanding for the last 5 years to support their growing workload. This is an ideal position for a graduate who is ambitious and keen to learn. If you have an education in mechanical engineering and a strong personality then there are no limits to what you can achieve with this forward thinking consultancy.

Join MBDA UK Ltd as a Senior Test Engineer and become an integral part of our Manufacturing team. This role presents an outstanding chance to contribute to the testing of our products. By joining us, you will have the opportunity to play a crucial role in upholding the highest standards of quality and reliability for our products. Salary: Circa £45,000 dependent on experience Dynamic (hybrid) working: 4-5 days per week on-site due to workload classification Security Clearance: British Citizen only. Restrictions and/or limitations relating to nationality and/or rights to work may apply. As a minimum and after offer stage, all successful candidates will need to undergo HMG Basic Personnel Security Standard checks (BPSS), which are managed by the MBDA Personnel Security Team. What we can offer you: Company bonus: Up to £2,500 (based on company performance and will vary year to year) Pension: maximum total (employer and employee) contribution of up to 14% Overtime: opportunity for paid overtime Flexi Leave: Up to 15 additional days Enhanced parental leave: offers up to 26 weeks for maternity, adoption and shared parental leave. Enhancements are available for paternity leave, neonatal leave and fertility testing and treatments. Facilities: Fantastic site facilities including subsidised meals, free car parking and much more Training and Development: Excellent career progression, training and career development opportunities The opportunity: This opportunity is for a Test Engineer to join the Manufacturing team supporting test and diagnostics of electrical/electronic sub-systems and circuit cards during all phases of the product lifecycle. You will be providing technical support to the manufacturing test capability, to ensure programme targets are met to agreed time, cost and quality requirements. Providing Test Engineering support during Design / Development phases from initial concept through to Production Readiness Review and release to Operations. Supporting Test Facility introduction and ensuring that appropriate configuration control of equipment and facilities is in place prior to use, including generating supporting test specifications and operator instructions. Supporting testing of electrical/electronic sub-assemblies and circuit cards, with diagnosis of production test failures down to component level. Working closely with Operations, the design teams and other stakeholders to overcome any technical challenges. Always aiming to deliver in line with all programme and quality requirements, whilst maintaining Test Engineering functional governance and pursuing continuous improvement. You will be working with a small team of dedicated engineers in a fast-paced but friendly and inclusive manufacturing environment. The team has a great mix of people, ranging from apprentices and graduates through to experienced engineers, all striving to deliver technical excellence across a number of different missile systems in development and production. What we're looking for from you: Minimum HNC level of qualification or equivalent in a relevant subject (HND/Degree preferred) plus experience in digital and analogue electronics manufacture and test. A good understanding of electrical/electronic measurement and test principles and test equipment, as well as fault diagnosis techniques for electronic/electro-mechanical sub-assemblies. Experience of using both manual and automated test equipment, preferably in a defence organisation or similar manufacturing environment. Familiar with enterprise resource planning and manufacturing execution system programs (e.g. SAP, MES) for recording test activities and generating non-conformance reports and concessions. The ability to plan and organise own work in order to ensure multiple tasks can be prioritised and delivered against Project objectives. Good verbal and written communication skills, including generation of test specifications, operator instructions and technical reports based on higher-level requirements. Proven analytical and problem solving skills, with strong attention to detail. Our company: Peace is not a given, Freedom is not a given, Sovereignty is not a given MBDA is a leading defence organisation. We are proud of the role we play in supporting the Armed Forces who protect our nations. We partner with governments to work together towards a common goal, defending our freedom. We are proud of our employee-led networks, examples include: Gender Equality, Pride, Menopause Matters, Parents and Carers, Armed Forces, Ethnic Diversity, Neurodiversity and more We recognise that everyone is unique, and we encourage you to speak to us should you require any advice, support or adjustments throughout our recruitment process. Follow us on LinkedIn (MBDA), X Instagram (MBDA_UK) and Glassdoor or visit our MBDA Careers website for more information.

We have an exciting opportunity for a passionate Test Engineer to join our dynamic team within Manufacturing. Salary: Circa £44,000 depending on experience Dynamic (hybrid) working: 4-5 days per week on-site due to workload classification Security Clearance: British Citizen only. Restrictions and/or limitations relating to nationality and/or rights to work may apply. As a minimum and after offer stage, all successful candidates will need to undergo HMG Basic Personnel Security Standard checks (BPSS), which are managed by the MBDA Personnel Security Team. This role will require DV Clearance to be obtained. What we can offer you: Company bonus: Up to £2,500 (based on company performance and will vary year to year) Pension: maximum total (employer and employee) contribution of up to 14% Overtime: opportunity for paid overtime Flexi Leave: Up to 15 additional days Flexible working: We welcome applicants who are looking for flexible working arrangements Enhanced parental leave: offers up to 26 weeks for maternity, adoption and shared parental leave -enhancements are available for paternity leave, neonatal leave and fertility testing and treatments Facilities: Fantastic site facilities including subsidised meals, free car parking. Healthcare Cash Plan: The Healthcare Cash Plan benefit provides the option to claim cash back on everyday healthcare expenses such as optical, dental, health and wellbeing and more. The opportunity: This opportunity isfor a Senior Test Engineer to join the Manufacturing team supporting test and diagnostics of electrical/electronic sub-systems and circuit cards during early phases of the product lifecycle. You will be providing technical support to the manufacturing test capability, to ensure programme targets are met to agreed time, cost and quality requirements. Providing Test Engineering support during Design / Development phases from initial concept through to Production Readiness Review and release to Operations. Supporting Test Facility introduction and ensuring that appropriate configuration control of equipment and facilities is in place prior to use, including generating supporting test specifications and operator instructions. Supporting testing of electrical/electronic sub-assemblies and circuit cards, with diagnosis of production test failures down to component level. Working closely with Operations, the design teams and other stakeholders to overcome any technical challenges. Always aiming to deliver in line with all programme and quality requirements, whilst maintaining Test Engineering functional governance and pursuing continuous improvement. Work alongside Test Experts and design engineers to understand and implement the project test strategy and influence the design to include the appropriate testability solutions. Work alongside the Manufacturing management in compiling the initial process flows for new product. Create and maintain the test documentation for production test equipment. Support the Process FMEA, ensuring test mitigations are in place. Initialise test fixture designs for new product. Estimate the time taken to test new products Support the design engineers in carrying out the functional & Environmental testing of initial prototypes. You will be working with a small team of dedicated engineers in a fast-paced but friendly and inclusive manufacturing environment. The team has a great mix of people, ranging from apprentices and graduates through to experienced engineers, all striving to deliver technical excellence across a number of different missile systems in development and production. What we're looking for from you: Minimum Qualification Level Level 4 or greater in Engineering (preferably Electrical, Electronic, Aerospace or Mechanical), Physics or Maths. Must include modules for Electronic Principles (digital or analogue) or Electrical Principles. Several years' experience in related industry / manufacturing. A good understanding of electrical/electronic measurement and test principles and test equipment, as well as fault diagnosis techniques for electronic/electro-mechanical sub-assemblies. Experience of using both manual and automated test equipment, preferably in a defence organisation or similar manufacturing environment. Familiar with enterprise resource planning and manufacturing execution system programs (e.g. SAP, MES) for recording test activities and generating non-conformance reports and concessions. The ability to plan and organise own work in order to ensure multiple tasks can be prioritised and delivered against Project objectives. Good verbal and written communication skills, including generation of test specifications, operator instructions and technical reports based on higher-level requirements. Proven analytical and problem solving skills, with strong attention to detail. Our company: Peace is not a given, Freedom is not a given, Sovereignty is not a given MBDA is a leading defence organisation. We are proud of the role we play in supporting the Armed Forces who protect our nations. We partner with governments to work together towards a common goal, defending our freedom. We are proud of our employee-led networks, examples include: Gender Equality, Pride, Menopause Matters, Parents and Carers, Armed Forces, Ethnic Diversity, Neurodiversity and more We recognise that everyone is unique, and we encourage you to speak to us should you require any advice, support or adjustments throughout our recruitment process. Follow us on LinkedIn (MBDA), X Instagram (MBDA_UK) and Glassdoor or visit our MBDA Careers website for more information.

This role provides a unique chance to shape how MBDA undertakes production testing. Salary: Circa £50,000 depending on experience Dynamic (hybrid) working: 4-5 days per week on-site due to workload classification Security Clearance: British Citizen only. Restrictions and/or limitations relating to nationality and/or rights to work may apply. As a minimum and after offer stage, all successful candidates will need to undergo HMG Basic Personnel Security Standard checks (BPSS), which are managed by the MBDA Personnel Security Team. What we can offer you: Company bonus: Up to £2,500 (based on company performance and will vary year to year) Pension: maximum total (employer and employee) contribution of up to 14% Overtime: opportunity for paid overtime Flexi Leave: Up to 15 additional days Flexible working: We welcome applicants who are looking for flexible working arrangements Enhanced parental leave: offers up to 26 weeks for maternity, adoption and shared parental leave -enhancements are available for paternity leave, neonatal leave and fertility testing and treatments Facilities: Fantastic site facilities including subsidised meals, free car parking. Healthcare Cash Plan: The Healthcare Cash Plan benefit provides the option to claim cash back on everyday healthcare expenses such as optical, dental, health and wellbeing and more. The opportunity: This opportunity is for a Principal Test Engineer to join the Manufacturing organisation supporting test system introduction and test and diagnostics of electrical/electronic weapon systems and sub-assemblies during the development / early production phase. You will work as part of the Manufacturing UK Test Engineering function, responsible for development testing and ensuring production readiness of new products and their test solutions. Providing Test Engineering support during Design / Development phases from initial concept through to Production Readiness Review and release to Operations. Supporting Test Facility introduction and ensure that appropriate configuration control of equipment and facilities is in place prior to use, including generating supporting test specifications and operator instructions. Supporting testing of electrical/electronic weapon systems, sub-assemblies and circuit cards, with diagnosis of development test failures down to circuit card and potentially component level, including identification of proposed remedial and corrective actions. Working closely with Operations, design teams and other stakeholders to overcome any technical challenges. Providing technical support and advice to the Test Engineering Team Lead and guiding and mentoring less experienced test engineers within the team. You will be working with a small team of dedicated engineers in a fast-paced but friendly and inclusive manufacturing environment. The team has a great mix of personnel ranging from apprentices and graduate engineers through to experienced technical practitioners, all striving to deliver technical excellence across a number of different products in development and production. What we're looking for from you: Minimum Qualification Level Level 4 or greater in Engineering (preferably Electrical, Electronic, Aerospace or Mechanical), Physics or Maths. Must include modules for Electronic Principles (digital or analogue) or Electrical Principles. Several years' experience in related industry / manufacturing. A good understanding of electrical/electronic and RF measurement and test principles and test equipment, as well as systems-level functional testing. Experience of the product development lifecycle and supporting processes, in an electronics manufacturing environment. Significant experience of using both manual and automated test equipment, preferably in a defence organisation or similar manufacturing environment. The ability to plan and organise own work in order to ensure multiple tasks can be prioritised and delivered against Project objectives, whilst being available to support others. Good verbal and written communication skills, including working within a team, generation of test specifications, operator instructions and technical reports based on higher-level requirements. Our company: Peace is not a given, Freedom is not a given, Sovereignty is not a given MBDA is a leading defence organisation. We are proud of the role we play in supporting the Armed Forces who protect our nations. We partner with governments to work together towards a common goal, defending our freedom. We are proud of our employee-led networks, examples include: Gender Equality, Pride, Menopause Matters, Parents and Carers, Armed Forces, Ethnic Diversity, Neurodiversity, Disability and more We recognise that everyone is unique, and we encourage you to speak to us should you require any advice, support or adjustments throughout our recruitment process. Follow us on LinkedIn (MBDA), X Instagram (MBDA_UK) and Glassdoor or visit our MBDA Careers website for more information.

A growing UK-based engineering company, specialising in the design and build of state-of-the-art automation solutions, is looking to appoint a Mechanical Design Engineer. This organisation works with a wide variety of industries - from food and beverage to pharmaceuticals - delivering innovative machinery, robotics, and vision inspection systems that transform production processes. With two modern facilities in the Midlands and South West, and a strong international customer base, the business is expanding rapidly and investing in exciting, cutting-edge projects. This is a great opportunity to join a close-knit engineering team and play a key role in designing bespoke automation machinery for clients across the UK, Europe, and the USA. Mechanical Design Engineer Job Overview Reporting to the Engineering Director, you'll be responsible for bringing customers' automation concepts to life. You'll work across a wide range of projects, from standalone solutions to full turnkey automation systems. The role is predominantly office/factory-based but will involve occasional travel to customer sites. Responsibilities include: Designing and developing new and existing components/products Conceptual design of automation solutions Detailing and refining existing designs Site layout design Producing bills of materials (BoMs) Project management and ownership of customer projects from concept through to delivery Ensuring all projects meet high quality standards and are delivered on time Mechanical Design Engineer Job Requirements We're open to applications from both graduates and experienced engineers - what matters most is your passion, problem-solving ability, and positive attitude. Experience & Skills: Mechanical Engineering degree or equivalent, OR minimum 3 years' CAD draughting experience Proficiency with Autodesk Inventor (or similar 3D design software) Experience in special purpose machinery design (ideal) Knowledge of manufacturing industries and processes Strong customer/supplier liaison skills Excellent eye for detail and ability to work autonomously as well as within a team Fluent in English (a second language is a bonus) Eligible to work in the UK and able to travel when required Mechanical Design Engineer Salary & Benefits Competitive salary (DOE) Spot bonuses/awards for outstanding contributions Contributory pension scheme (post-probation) 21 days holiday plus statutory holidays (with additional days for long service) Private health insurance for you and your family (post-probation) Cycle to work scheme (post-probation) Supportive, friendly team environment Standard hours: Mon-Thurs 08:00-17:00, Fri 08:00-14:00 (with occasional travel/overtime) Please note: The site is not accessible by public transport, so a full driving licence and own transport are essential . Bennett & Game Recruitment are acting as a Recruitment Agency in relation to this vacancy. Bennett and Game Recruitment are a multi-disciplined technical recruitment agency based in Chichester, West Sussex operating across the UK with specialist teams covering a range of industries. We are acting as a Recruitment Agency in relation to this vacancy, and in accordance with GDPR by applying you are granting us consent to process your data, contact you about the services we offer, and submit your CV for the role you have applied for.

Junior Mechanical Design Engineer 30,000 - 35,000 + Progression + Company Benefits + International Travel + Early Friday Finish Cheltenham Are you a Graduate or similar with CAD Draughtsman experience with an interest in Engineering Design looking to join a growing company who can offer career progression, a host of company benefits and a range of unique projects to work on for companies all over the world? On offer is the opportunity to work for a company that design and manufacture bespoke automated machinery for a range of companies encompassing pharmaceutical, packing, manufacturing among many other industries. This role will involve the design of bespoke manufacturing machinery, working as part of a team on to create designs for individual parts of a larger solution. You will occasionally travel to clients sites to liaise and understand what is needed in terms of machinery. There will be plenty of support from senior members in order to enable your understanding, skillset growth and progression. This role would suit an Engineering Graduate or similar with CAD Draughtsman experience with an interest in Engineering Design looking to design unique machinery solutions for a range of international clients for a company that can offer career progression and a host of company benefits. The Role Design of Bespoke machinery Helping to manage projects Creation of bill of materials Travel around the UK and Abroad The Person Engineering Graduate or similar with CAD Draughtsman experience Commutable to Cheltenham Reference Number:BBBH21667A Key Words: Mechanical Design Engineer, Design Engineer, CAD Engineer, CAD, SolidWorks, Autodesk Inventor, Machinery Design, Automation Design, Cheltenham, Gloucester, Tewkesbury, Stroud, Worcester, Graduate If you're interested in this role, click 'apply now' to forward an up-to-date copy of your CV. We are an equal opportunities employer and welcome applications from all suitable candidates. The salary advertised is a guideline for this position. The offered renumeration will be dependent on the extent of your experience, qualifications, and skill set. Ernest Gordon Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job, you accept the T&C's, Privacy Policy and Disclaimers which can be found at our website.

Length of contract 12 months Start date (dd Month Year) 22nd June 2026 Qualification requirements As a minimum requirement you'll need to have obtained, or be predicted to obtain, a 2.2 in your Bachelor's or Master's degree in a relevant STEM subject, Structural, Mechanical or Civil Engineering. Description Length of Placement: 12 months Job Title: Undergraduate Submarines Structural Engineer Location: Barrow (Cumbria) We offer a range of hybrid and flexible working arrangements, however for this role you will be expected to attend your site 3-5 days per week. Salary: £24,300 What you'll be doing: • You'll join an exciting team who work throughout the whole Submarine life cycle, from concept through to activities with the operational fleet. • Supporting the Structural Design of Submarines. • Outfit design - including sheet metal, deck coverings, furniture, and fittings, to ensure a habitable submarine environment. • Designing equipment to withstand shock and dynamic movements of the submarine whilst in operation. • Lifting Arrangement Design and oversight of submarine movements • Structural and Stress Analysis. Benefits: As well as a competitive pension scheme, BAE Systems also offers employee share plans, an extensive range of flexible discounted health, wellbeing & lifestyle benefits, including a green car scheme, private health plans and shopping discounts - you may also be eligible for an annual incentive. The Submarines Team: Be a part of designing, building, testing, and commissioning the Astute and Dreadnought Class, the largest and most advanced submarines operated by the Royal Navy, providing a powerful and secure deterrent for the United Kingdom. Why BAE Systems? This is a place where you'll be able to make a real difference. You'll be part of an inclusive culture that values diversity of thought, rewards integrity, and merit, and where you'll be empowered to fulfil your potential. We welcome people from all backgrounds and want to make sure that our recruitment processes are as inclusive as possible. If you have a disability or health condition (for example dyslexia, autism, an anxiety disorder etc.) that may affect your performance in certain assessment types, please speak to your recruiter about potential reasonable adjustments. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role, to allow for meaningful security vetting checks.

Graduate/Junior Design Engineer (SolidWorks/Decorative Lighting) Blackpool £30,000 to £40,000 + Life Assurance Scheme + Staff Discount + Annual Bonus Scheme + Full Training Plan + Over Time Are you a Graduate Design Engineer or similar looking to join a manufacturing company with a distinguished reputation in designing, manufacturing and suppling products to the Hospitality sector internationally. Do you want to work for a reputable company who take pride in producing award winning products and values their employees, offering an industry-leading training to help progress your technical skills. This Monday to Friday fully on-site role is partnered with additional bonuses such as paid overtime, staff discount and a life assurance scheme. On offer is the opportunity for a Graduate Design Engineer or similar to join a company which prides itself on the quality of their products, taking advantage of their 75 years of experience. The company is one of the oldest manufactures in their specialised field, partnered with a historic past winning multiple awards and a distinguished global portfolio. In this role you will design and produce elegant and innovative decorative lighting, primarily through CAD modelling, using systems such as SolidWorks as well as PDM systems and KeyShot - SolidWorks being the main one. This role will also consist of assisting the Chief Design Officer as well as the Marketing team to create concepts and key promotional materials. Alongside this, you will also collaborate with internal teams such as engineering, production and procurement to help modify and update existing designs to help improve cost or performance. This role would suit a Graduate Design Engineer or similar looking for a role at a well-established and industry leading decorative lighting manufacturer, with the added benefit of an industry leading training scheme. For this position, you will need to have a degree in Product Design, Industrial Design, Mechanical Design or Graphic Design. Ideally the candidate will be able to digitally sketch and have an understanding with LEDs/lighting, adobe illustrator and metal/glass fabrication. The Role: Utilisation of CAD Systems - specifically SolidWorks Assisting internal teams Root analysis to improve designs The Person: Graduate Design Engineer Within 20 miles from Job site Eagerness to evolve skills If you're interested in this role, click 'apply now' to forward an up-to-date copy of your CV. We are an equal opportunities employer and welcome applications from all suitable candidates. The salary advertised is a guideline for this position. The offered renumeration will be dependent on the extent of your experience, qualifications, and skill set. Ernest Gordon Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job, you accept the T&C's, Privacy Policy and Disclaimers which can be found at our website. REF: BBBH21907

Description Length of placement: 6 months Job Title: Undergraduate Naval Ships Manufacturing Engineer Location: Govan (Glasgow) We offer a range of hybrid and flexible working arrangements, however for this role you will be expected to attend your site 3-4 days per week. Salary: £24,300 What you'll be doing: • Influence the design to ensure it is in line with current and evolving manufacturing capability. • Develop the manufacturing capability and technology (including IT) to ensure the design requirement can be met. • Translate the Engineering Design intent (Drawings, standards etc.) into Manufacturing Engineering data for use in Operations. • Ensure that Manufacturing Engineering output meets all the relevant Safety and Quality requirements. • Generate and progress Manufacturing Engineering output in-line with Project / Programme requirements. • Define and execute emergent work affecting manufacture, fabrication or construction. Benefits: As well as a competitive pension scheme, BAE Systems also offers employee share plans, an extensive range of flexible discounted health, wellbeing & lifestyle benefits, including a green car scheme, private health plans and shopping discounts - you may also be eligible for an annual incentive. The Naval Ships Team: We design and build offshore patrol vessels, giant aircraft carrier and provide complex warships including the Type 26 Frigate to the Royal Navy, giving the customer capability to fulfil operations around the world. Why BAE Systems? This is a place where you'll be able to make a real difference. You'll be part of an inclusive culture that values diversity of thought, rewards integrity, and merit, and where you'll be empowered to fulfil your potential. We welcome people from all backgrounds and want to make sure that our recruitment processes are as inclusive as possible. If you have a disability or health condition (for example dyslexia, autism, an anxiety disorder etc.) that may affect your performance in certain assessment types, please speak to your recruiter about potential reasonable adjustments. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role, to allow for meaningful security vetting checks. Qualification requirements As a minimum requirement you'll need to have obtained, or be predicted to obtain, a 2.2 in your Bachelor's or Master's degree in Production Engineering Management, Product Design Engineering, Industrial Engineering, Manufacturing Engineering or Mechanical Engineering. Start date (dd Month Year) 22nd June 2026 Length of contract 6 months

DUE TO COMPANY GROWTH PLANS,OUR CLIENT IS LOOKING FOR A GRADUATE ELECTRONIC HARDWARE DESIGN ENGINEER TO WORK IN A BUSY, DYNAMIC ENVIRONMENT IN OUR OFFICES IN ASH VALE, SURREY. The role will involve working within the engineering side of the business which will include design and development work, product testing and manufacturing support activities. You will be working closely with a team of senior engineer and engineering technicians. Although the ability to self-manage is important, the senior engineers will support and mentor a successful candidate to allow them to grow and develop into the role. Beneficial Technical Skills Knowledge of, or willingness to learn, skills to be able to write test plans against formal product requirements to allow product compliance to be demonstrated. Mechanical assembly skills to be able to assist in the build and development of prototype products and test samples/bespoke test equipment. Understanding of, or willingness to learn, electromagnetic compatibility (EMC) design principles with the ability to consider EMC during system and sub-assembly design. A basic awareness of RF engineering may be of benefit in this respect although is not expected. Attributes needed Ability to adopt existing design processes/systems and provide input into developing existing processes. Ability to work independently, managing own time relative to the project time frames, as part of a dynamic and flexible multi-disciplinary team working of a variety of projects at any one time. Be adaptable to work both in a structured, pre-planned, work environment yet be able to effectively switch to reactive tasks, such as production support and failure investigations, when required. A successful candidate will be keen to progress and build a successful career from the role. Core Technical Requirements: Relevant 2:1 or higher degree in Electronic Engineering (or equivalent qualification). Relevant industry experience either following qualification or as a placement year during education. Practical electronics skills, including fine-pitch surface mount soldering and knowledge of general test equipment applications and use. Demonstrate an understanding of measurement and data acquisition techniques, to enable the candidate to select and apply appropriate test methods and equipment set ups to perform the required testing activities. Experience in prototyping, debugging and functional test of electronic systems. Ability to work from preprepared test specification and method to perform black box product testing as part of system qualification. Able to clear interpret and present test data to show compliance against a test plan. Demonstrate and understanding of analogue and digital components and circuit design theory knowledge to understand electronic assemblies at component level. Ability to work from preprepared test specification and method to perform PCB component level testing of sub-assemblies as part of formal product qualification Experience working with product specification and product standards such as EN, IEC, BS, Def-Stan and MIL-STD.

Job Description Design Safety Engineer Full Time Bristol - Hybrid - minimum 3 days on site per week Why Rolls-Royce? We have number of Design Safety career opportunities within our Defence business in Bristol and our satellite site in Derby. We are looking to fill a number of roles with a range of levels of experience from new graduates who are eager to develop, to experienced specialists. We are a market leader in aero engines for military transport and patrol aircraft, and also have significant scale in naval, and strong positions in combat and helicopter applications. We are pioneering more advanced and innovative power systems to ensure future combat air systems remain at the forefront of mission capability throughout their operational service. Work with us and we'll welcome you into an inclusive culture, one that invests in your continuous learning and development, and gives you access to a wide breadth and depth of experience. We offer excellent development, a competitive salary and remarkable benefits. These include bonus, employee support assistance and employee discounts. Your needs are as unique as you are. Hybrid working is a way in which our people can balance their time between the office, home or another remote location. It's a locally managed and flexed informal discretionary arrangement. As a minimum we're all expected to attend the workplace for collaboration and other specific reasons, on average three days per week. What you will be doing: Design Safety engineers influence design through understanding how failures will affect system operation, and analyse the resulting design, providing feedback on any impact this will have to the safety or reliability of the system and ensuring that the appropriate standards are met. This includes: Evaluation of design concepts (potential failures, failure consequences and product-level hazards) and to define hazard mitigation strategies. Evaluation of a component design to identify potential failure modes and their resulting failure effects and criticality (e.g. FMECA). Identification of critical and significant parts and systems through detailed analysis of product risk level. To analyse failures numerically using deterministic and probabilistic mathematical methods. Analyse and quantify risks associated with human / system interaction including Human Factors. Production of Safety Case reports. Operation of a Failure Reporting Analysis & Corrective Action System (FRACAS). Who we're looking for: Being a part of Rolls-Royce you'll know we embrace agility, are bold, pursue collaboration and seek simplicity in everything we do. These principles form our values and behaviours and are an essential component of our assessment process and are fundamental qualities that we seek for all roles. In addition, the following role specific skills are preferred: Qualification to degree level in a STEM subject and with experience in a relevant engineering environment (Mechanical, Aeronautical, Electrical or Controls). Good holistic approach to problem solving Analytical and logical approach. Familiarity with the design, operation and environment of gas turbine engines. Knowledge / experience of Safety & Reliability engineering techniques. We are an equal opportunities employer. We're committed to developing a diverse team and an inclusive working environment. We believe that people from different backgrounds and cultures give us different perspectives. And the more perspectives we have, the more successful we'll be. By building a culture of respect and appreciation, we give everyone who works here the opportunity to realise their full potential. You can learn more about our global Inclusion strategy at Our people Rolls-Royce To work for Rolls-Royce Defence you need to hold a Security Check (SC) clearance without any caveats to that clearance. Rolls-Royce will support the application for Security Clearance if you don't currently already have this in place. Due to the nature of work the business conducts and the protection of certain assets, you must hold a UK nationality. Any dual nationals will require additional scrutiny and background checks prior to commencing work with RRSL. Job Category Engineering for Services Posting Date 07 Oct 2025; 00:10 Posting End Date 13 Oct 2025PandoLogic.

Senior Mechanical Building Services Engineer - Client Summary My Client has an exciting opportunity for an experienced mechanical building services design engineer to join their rapidly growing practice at either an Intermediate or Senior level, depending on experience. My client was established in 2009 to bring together experienced engineers in the field of building services engineering. The practice is currently engaged in a wide range of building services engineering projects worldwide, including commercial, research and development, residential, retail, and utilities. Senior Mechanical Building Services Engineer - Duties Have responsibility for all aspects of assigned project work, and with a focus primarily on commercial, public sector and hospitality projects. Client facing on matters of both a commercial and technical nature. Take an active role in business development Support the senior leadership team in project planning and resource management Lead the mechanical design team in the coordination and delivery of individual projects and take an active role in the development of junior engineers Support the design team on technical aspects of the projects developing/mentoring the teams to successfully deliver the projects. Working and liaising with associated engineering disciplines as part of delivering technical support. Support the wider senior management team running the commercial aspects of projects, bidding for new projects, and developing client relationships Produce detailed engineering designs using Designbuilder, Designmaster, AutoCAD, and Revit software whilst meeting all relevant standards, including energy efficiency and low or net zero carbon requirements. Senior Mechanical Building Services Engineer - Requirements/Experience Be BEng or MEng degree qualified. Have Chartered Engineer status or be working towards. Member of associated Professional bodies such as MCIBSE or MIMechE, or working towards. Have a minimum of 5, ideally 10 years UK-based postgraduate experience working in design consultancy. Have exceptional skill associated with mechanical building services design and an awareness of all technical requirements, legislation, and best practice. Have sound commercial knowledge and experience of monitoring financial spend on projects against project targets. Have good project management skills and the ability to manage multiple projects of varying size/complexity. Demonstrate enthusiasm in all aspects of the role and have a positive can-do attitude. Demonstrate confidence both to the client and internally to project an appropriate image and support peers and colleagues. Be flexible in approach, to suit changing project/market forces.