171 jobs found

Workshop Fleet Technician Vehicle Management Unit - Monday to Friday (days) Your career path will see you upskilled on new products and put through various courses that will make you miore effifcient in your role. We are looking for a qualified and time served HGV Technician who can demonstrate a thorough understanding of commercial vehicle mechanical dynamics. You can expect to be situated in a positive and vibrant working environment where your efforts will be rewarded. A skills shortage can be trained by way of upskilling. What cannot be trained however is the right attitude and the desire to give your clients a first class service. You will be carrying out inspections to a varied and diverse fleet. You could be working on main dealer heavy goods vehicles (HGV) refuse collection vehicles, road sweepers, hook loaders, light commercials (vans), trailers and tippers- The type of work you can expect to be carrying out includes (but is not limited to) Routine (and preventative) maintenance MOT preparation Scheduled servicing to DVSA standards 6 (or 8) weekly inspections Correction of running defects Chassis and fabrication work Hydraulics and pneumatics Improvement of vehicle standards Electrical and wiring inspections and corrections Ideally you will be fully qualified (City & Guilds), NVQ or equivalent. Additional accreditations such as IRTEC would be desirable, as would a HGV Class 1 or licence. So what are you waiting for. Get in touch for further details and start that next journey on your career. HGV, heavy goods vehicle, commercial vehicle, RCV, refuse collection vehicle, tipper, sweeper, gritter, mechanic, vehicle engineer, vehicle technician, fitter, workshop. VMU

Mobile Vehicle Engineer - Gloucester Day shifts Monday to Friday Are you ready to go on the road and take your technical skills to a dedicated network of customer sites? If so, then this could be the role for you? We are looking for a self motivated and independent Vehicle Engineer who can travel to our clients various workshops in a designated area providing: Your day starts when you start your vehicle! Day shifts - 45 hour week Are you ready to go on the road and take your technical skills to a dedicated network of customer sites? If so, then this could be the role for you? In this role, no 2 days will ever be the same and the products that you work on will be diverse. HGV s, Ground Support GSE, RORO (Roll on Roll Off), Fire and rescue, Tractors and Tugs plus other bespoke operating platforms. We are looking for a self motivated and independent HGV Vehicle Engineer who can travel to our clients various workshops in a designated area providing: Callouts Preventative Maintenance Emergency Breakdowns Pre-arranged servicing at rural sites MOT Preparation Engine work and diagnostic investigations Correction of running defects Chassis and fabrication work Hydraulics and pneumatics Improvement of vehicle standards Electrical and wiring inspections and corrections Your industry is moving faster with every day that passes. Electric & Hydrogen Vehicles are now part of the present and you will be trained on the newest products and repair techniques when required. A Class2 Licence would be beneficial. You will need to be a fully qualified Commercial Vehicle Technician or have been accredited via an authorised Apprenticeship. Benefits you will start with 24 days annual holiday (plus bank holidays) per annum, you will also be enrolled in the pension scheme and qualify for the private healthcare scheme. If this role isn t for you but you are looking for a move, then please get in touch. Kautec Recruitment is a fast growing automotive people business that recruits the right way. HGV, heavy goods vehicle, commercial vehicle, RCV, refuse collection vehicle, tipper, sweeper, gritter, mechanic, vehicle engineer, vehicle technician, fitter, workshop. A problem solver with a can-do mindset Abiding by health and safety rules You will be travelling within an area of Gloucester and surrounding We require an excellent understanding of vehicle technology, and be capable of following the repair process from fault analysis to completion The personal qualities that my client are looking for are simple, these are the ethos of an exemplary team member that can represent the company in the best way possible; Reliable and punctual Enthusiastic, proactive and an innovative thinker

Forklift Engineer / Field Service Engineer / Mobile Plant Engineer Up to 40,000 + Overtime + Company Van 45 hours per week Nationwide Role Are you a skilled Forklift Engineer, Field Service Engineer, Mobile Engineer, Plant Engineer, or Mechanical Engineer tired of being undervalued, underpaid, or stuck in the same routine? What if you could take your expertise on the road as a Mobile Forklift Engineer / Field Service Technician, earn what you're truly worth, and join a company that actually respects your time and skill? This is your opportunity. What's In It For You? Up to 40,000 basic salary Uncapped overtime Fully equipped company van Nationwide coverage 45-hour working week Supportive team & management - whether you're a Forklift Technician, Plant Fitter, or Service Technician The Role As a National Forklift Engineer / Field Service Engineer / Mobile Plant Engineer, you'll be responsible for: Servicing, maintaining, and repairing a wide range of forklift trucks, material handling equipment, and plant machinery Diagnosing electrical, mechanical, and hydraulic faults as a Service Technician / Maintenance Engineer Delivering excellent customer service on-site as a Field Service Engineer / Mobile Technician Managing your own workload and travel across the UK as an Autonomous Engineer / Mobile Service Engineer What We're Looking For Proven experience as a Forklift Engineer, Plant Engineer, Field Service Engineer, or Mobile Engineer Strong mechanical, electrical, and hydraulic knowledge (ideal for Multi-Skilled Engineers) A self-motivated Service Engineer / Maintenance Technician who enjoys working independently Full UK driving licence (essential for Mobile / Field-Based Engineers) Flexibility to travel nationwide Forklift Engineer, Field Service Engineer, Mobile Engineer, Plant Engineer, Service Technician, Maintenance Engineer, Mechanical Engineer, Electrical Engineer, Forklift Technician, Plant Fitter, Material Handling Engineer, Mobile Service Engineer, Field Technician, Workshop Engineer, Engineer Jobs UK, Nationwide Engineer If you don't like being on the road, solving problems under pressure, or taking ownership of your work, this won't suit you. But if you're the kind of Field Service Engineer / Forklift Technician who takes pride in fixing things right the first time, enjoys variety, and wants to maximise your earnings, then we want to hear from you. Apply Now Apply today and take the next step in your career as a Forklift Engineer / Mobile Engineer / Field Service Technician. INDHP If you would like to know more about this position, then please forward your CV to (url removed) immediately. If you would like to discuss this position, please call (phone number removed) ext 223 and ask to speak to Chloe. Please note Alecto Recruitment are acting as an employment business in relation to this vacancy.

Electrical Maintenance Fitter (Manufacturing) £45,000 - £50,000 + Days Based + Mon-Fri + Tailored Training + Continued Progression + Flexible Working + Healthcare + Mon-Fri + Optional Overtime + Career Progression Inverness, Scotland Are you Electrical Maintenance Fitter or similar with some manufacturing or Industrial experience, looking for a stable role with an industry leading manufacturer who will provide full training in Electrical Engineering and PLC's, continued progression and a long-term career? In this role you will be working on a variety of machinery and automated manufacturing equipment. This will include full training, working reactively and preventatively, troubleshooting and repairing a range of equipment. This forward-thinking manufacturer has established themselves as a staple supplier of construction materials across the UK and Europe. This company's manufacturing process spans across the whole production process from raw materials to packaging and distribution. This role would suit an Electrical Maintenance Fitter or similar from a manufacturing or industrial background looking for full training and a stable career. The Role Reactive and preventative electrical maintenance Working on automated manufacturing equipment Tailored training to bring you up to speed Working from Monday to Friday 8:00am to 4:00pm Call out rota The Person Electrical maintenance fitter or similar Commutable to Inverness Reference Number: BBBH24925a Engineering, Engineer, Electrical, Maintenance, NVQ, Manufacturing, Machinery, Fitter, PLC, Automation, Repair, Service, Technician, Workshop, Factory, Scotland, Inverness If you're interested in this role, click 'apply now' to forward an up-to-date copy of your CV. We are an equal opportunities employer and welcome applications from all suitable candidates. The salary advertised is a guideline for this position. The offered renumeration will be dependent on the extent of your experience, qualifications, and skill set. Ernest Gordon Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job, you accept the T&C's, Privacy Policy and Disclaimers which can be found at our website.

SG Personnel are working with a busy and highly reputable manufacturing/engineering business in Sunderland, who are looking to recruit an Electrical Fitter on a long term basis, or possibly permanent. This is an excellent opportunity with a good business and a superb working environment. The work will involve skilled assembly of bespoke units and panels which are built to order. Candidates must be time served in electrical fitting and panel wiring. Hours of work are: Monday to Thursday, 8am-4.30pm. Friday, 8am-1pm. Rate of pay is 18 per hour. Overtime is available.

MULTISKILLED BODYSHOP TECHNICIAN OTE - £58,000 Multiskilled Bodyshop Technician - Dual skilled in Panel Beating & Mechanical, Electrical & Trim (MET) Basic Salary: £46,000+ - Plenty of Overtime available - Quarterly Team Bonus Working Hours: Monday - Friday (7.30am - 4.30pm) Location: Swindon, Wiltshire A fantastic opportunity has arisen for a dual-skilled Panel Beater & MET Technician to join a leading accident repair team at a state-of-the-art Bodyshop facility. We are seeking a talented professional who is comfortable in all aspects of panel beating and experienced in mechanical, electrical and trim (MET) duties, including geometry checks, mechanical work and suspension-related tasks. You'll be repairing and reinstating damaged vehicles to manufacturer standards using modern equipment, advanced repair methods, and working within a fast-paced, professional repair centre. Key Responsibilities Carry out high-quality panel repairs, reshaping, welding, filling and structural work to manufacturer and industry standards. Perform MET duties, including strip & refit, mechanical repairs, suspension work, and geometry/diagnostic checks. Work efficiently to maximise productivity and bonus opportunities. Follow correct repair methods and produce results in line with factory specifications. Ensure all repairs are completed safely and deliver excellent customer satisfaction. Utilise modern tools, equipment and repair techniques in a brand new, state-of-the-art Bodyshop. Skills & Qualifications Completed a recognised apprenticeship in Panel Beating and/or MET (NVQ / VCQ / SVQ / ATA or equivalent). Proven experience working in a busy Bodyshop environment as both a Panel Beater and MET Technician. Strong understanding of vehicle repair techniques, including modern body repair methods and mechanical procedures. Competent with geometry equipment, mechanical inspection, and suspension-related repair tasks. A proactive team player with the motivation to earn bonus hours. Able to produce work to the highest standard with an up-to-date knowledge of industry best practice. Interested? If you believe you are a strong fit for this Dual-Skilled Panel Beater / MET Technician position, please contact Skills and quote reference job number 53685. About Auto Skills UK Auto Skills UK is a market-leading provider of temporary and permanent Bodyshop talent, from productive trades to senior management. We are always interested in speaking to skilled candidates across the Bodyshop sector, including: Panel Beater MET Technician Strip Fitter Bodyshop Technician Mechanical & Electrical Technicians

Dual Skilled - Mechanical and Electrical Fitters required to work within Rolling Stock. Rullion have a requirement for Maintenance Team Members, with strong electrical and mechanical skills, backed up with associated qualifications, to work on a contract for a leading rail company. You will be working as part of a large maintenance team on the Trans-Pennine Express fleet, based at Manchester Train C click apply for full job details

Labourer - Site Based £26,500 + Training + Progression + Bonus Monday- Friday 7:30am- 5pm Crawley Are you looking to work within a market leading company that offers training and progression?The company are a nationwide market leader in specialist industrial equipment rental which is used in industries such as construction, infrastructure, electrical site work, utilities and alike.Due to the continued growing and increasing demand for the services of my client, they are looking to expand their team and seeking a Labourer to support at their Southampton site. The successful candidate will be responsible for loading and offloading of equipment in the yard and assisting in the maintenance and upkeep of the depots rental fleet.This is an excellent opportunity to step into a forward-thinking, growing company that invests heavily in its people - offering first-class training, ongoing development, and genuine prospects for career progression.For more information please click apply and contact Alice Holwell - REFERENCE 4985 - The Role Supporting the team in preparing, testing and repairing diesel generators Occasional travel to customer sites Maintaining a tidy work space The Candidate Driving license essential Forklift training provided Confident working alone and as part of a teamYard Operative, Labourer, PDI, Fitter, Yard, Technician, Yard engineer, Crawley, East Grinstead, Copthorne, Crawley Down, Felbridge, Graduate, Operative, Mechanical, HND, HNC, NVQ, Beng, Grad

Service Engineer (Agriculture) Cheshire - Commutable from Crewe, Nantwich, Stoke-On-Trent, Winsford, Sandbach, Northwich and surrounding areas £30,000 - £45,000 + Training Opportunities + Company Vehicle + Pension + Days Based Role + Mostly Site Based Work Are you a Mechanical Service/ Maintenance Engineer or a Mechanical Fitter with experience working on plant machinery/HGVs, looking for a new role that provides training opportunities and the chance to develop your skillset in a new industry?On offer is a great opportunity to join a family run business that focuses on selling and conducting maintenance on machinery within the agriculture industry. They are offering long-term career stability and a chance to play a key role in their continued success and expansion.The company has a packed order book and are continuing to grow due to their strong performance within their industry. They are now looking for a Service/Maintenance Engineer to be a positive addition to their team. You'll be part of a highly professional team, contributing to the company's growth while advancing your skillset and career.In this role, you will be tasked with the maintenance of agricultural machinery, fault finding, conducting predelivery inspections on new machines, attending to breakdowns,. This is a fantastic chance to join a great organisation, where you will play an integral role in its future growth while building your expertise. The role: Maintenance of production machinery Fault finding on electrical panels Implementing planned maintenance schedules Attending to breakdowns Site based The person: Electrically bias Engineer Maintenance experience Can commute to site Reference Number: BBBH 273073To apply for this role or to be considered for further roles, please click "Apply Now" or contact Pelumi Salau at Rise Technical Recruitment.Rise Technical Recruitment Ltd acts an employment agency for permanent roles and an employment business for temporary roles.The salary advertised is the bracket available for this position. The actual salary paid will be dependent on your level of experience, qualifications and skill set. We are an equal opportunities employer and welcome applications from all suitable candidates Rise Technical Recruitment Ltd acts an employment agency for permanent roles and an employment business for temporary roles. The salary advertised is the bracket available for this position. The actual salary paid will be dependent on your level of experience, qualifications and skill set and will be decided by our client, the employer. Rise are not responsible or liable for any hiring decisions made by the end client. We are an equal opportunities company and welcome applications from all suitable candidates.

HGV Mechanics / Mechanical Fitter Technicians / Electrical Fitters required in Stockport. Due to business growth, this is an outstanding opportunity to join part of a global business operating in the defence industry, building and supplying Military Vehicles to the British Army. Working within a team of technicians responsible for the assembly process of the Boxer, working in line with the companys click apply for full job details

82433 - Craft Attendant Jointer Shifted This Craft attendant jointer (shifted) will report to the field staff supervisor and will work within Network Operations based in our Central London, Covent Garden office. You will be a permanent employee in our UK Power Networks team. You will attract a salary of 40,144 + shift allowance and benefits, and a bonus of 3%. If you are successful, you will need to undertake a medical and DBS reference check Close Date: . 24/05/2026 We also provide the following additional benefits 25 Days Annual Leave plus bank holidays. Reservist Leave - Additional 18 days full pay and 22 unpaid Personal Pension Plan - Personal contribution rates of 4% or 5% (UK Power Networks will make a corresponding contribution of 8% or 10%) Tenancy Loan Deposit Scheme, Season Ticket Loan Tax efficient benefits: Cycle to Work, Home & Tech, and Green Car Leasing Schemes Occupational Health support Switched On - scheme providing discount on hundreds of retailers' products Discounted gym membership Employee Assistance Programme Role You will assist the craftsperson in their role in terms of network maintenance, reinforcement, alterations, and fault repairs on the LV/HV distribution network. This will also include assisting in the restoration of LV supplies as part of fault working and system emergencies involving switching and jointing work on the LV/HV distribution network. This will be done by observing the work in progress to ensure correct procedures are being followed regarding PPE and safe working practices for the task in hand. Craft Attendants will be required to demonstrate a responsible and safe approach to unplanned hazardous situations. They will be required to deal professionally with members of the public, emergency services and local authorities when representing UK Power Networks in emergency situations. You will work A 37-hour week, over a 24-hour shift pattern, that includes nights and weekends, working 12-hour shifts that includes public holidays. The post holder, along with the Craftsperson, reports to the Field Staff Supervisor which forms part of the Network Operations business unit. The unit is responsible, amongst other responsibilities, for the rapid restoration of customer supplies through the dispatch of first response technicians, fitters, and linesmen. Duties Observe all work being carried out on live LV apparatus with exposed conductors. Ensure safe use of equipment following health & safety procedures and network standards specifically that colleagues on site are also wearing the relevant PPE. (This forms part of the duty of care of all operational staff under the Health and Safety at Work Act 1974). Set equipment up for the Fitter/Jointer including preparation of work, laying out tools and equipment for a task and providing the vehicle to allow jobs to be carried out. Assist the Fitter/Jointer when you carry out work on live 240/415v apparatus, conductors or equipment following appropriate safety procedures. Use appropriate IT equipment such as Toughpad, SAP data collection devices- an electronic job issuing system. Assist the Fitter/Jointer with all aspects of maintaining and inspecting the LV and HV network. Support the Fitter/Jointer in terms of using their own judgement. They undertake risk assessments of a job, considering feasibility, safety, knowledge of tools and equipment, and timeliness. They also liaise with the Field Engineer as and when appropriate. You will undertake a system emergency storm role where you carry out in accordance with network standards and safety requirements. Essential Qualifications and Experience Educated to at least GCSE level or equivalent. An understanding of the Electricity at Work Act including understanding electrical diagrams and maps i.e., points of isolation/earthing New Roads & Street works Act (NRSWA) - Units 1, 2 and 3 successfully achieved. Training would initially be at a training centre for a basic grasp of policy and health & safety. Craft Attendants would be expected to learn on the job. Trained in First Aid Awareness of policies relating to network standards and Health & Safety. Leading to a sound knowledge of electrical distribution. The Craft Attendant has to be aware of such policies, but only enough so as to escalate to the craftsperson if you felt there was a failure to follow a policy. Full UK driving licence required.

Join Our Team as an Electrical Fitter! Location: GatesheadJob Type: Full-time, PermanentSalary: £33,000-£40,000 - dependent on experience Are you an enthusiastic Electrical Fitter looking to make your mark in the engineering and manufacturing industry? Our client, a well-established organisation, is seeking a skilled professional to join their dynamic production team! This hands-on role involves the assembly, wiring, and pre-testing of bespoke electrical panels and assemblies. Key Responsibilities: Assemble electrical panels and systems according to engineering drawings Perform electrical wiring, terminations, and interconnections with precision Ensure all work meets internal quality and safety standards Accurately complete build and test documentation Collaborate with production and engineering teams to meet schedules Maintain a clean and organised workspace Contribute to continuous improvement initiatives Essential Requirements: NVQ Level 3 (or equivalent) in Electrical Engineering, Electrical Installation, or similar Proven experience in electrical assembly, panel building, or manufacturing Ability to read and interpret electrical drawings and wiring schematics Strong knowledge of low voltage electrical systems Proficient with hand tools, crimping tools, and cable management High attention to detail and quality workmanship Desirable Skills: 18th Edition Wiring Regulations Experience in a fast-paced manufacturing environment ECS / CSCS card Familiarity with complex electrical assemblies or control panels What's on Offer: Competitive salary based on experience Comprehensive company benefits package 25 days annual leave plus bank holidays Pension scheme Ongoing training and development opportunities Stable, long-term employment with a growing business If you're ready to take the next step in your career and contribute to exciting projects, we want to hear from you! Apply today and be part of a team that values quality and innovation! Adecco is a disability-confident employer. It is important to us that we run an inclusive and accessible recruitment process to support candidates of all backgrounds and all abilities to apply. Adecco is committed to building a supportive environment for you to explore the next steps in your career. If you require reasonable adjustments at any stage, please let us know and we will be happy to support you. Adecco acts as an employment agency for permanent recruitment and an employment business for the supply of temporary workers. The Adecco Group UK & Ireland is an Equal Opportunities Employer. By applying for this role your details will be submitted to Adecco. Our Candidate Privacy Information Statement explaining how we will use your information is available on our website.

Location; UK field based - head office Walsall We are working with a specialist engineering business supplying industrial washing and hygiene systems into food manufacturing, pharmaceutical and industrial processing environments across the UK. The business designs, installs and maintains bespoke washing systems, supporting customers where uptime, reliability and service response are critical. Due to continued growth, the business is looking to recruit a Field Service Mechanical Engineer to join a small, experienced engineering team. This is a field-based role working on customer sites across the UK, supporting planned maintenance, breakdown response, installation work and ongoing equipment reliability. You will be working on industrial washers, conveyor systems, spray bars, air knives, bin lifts and utensil washing equipment. The role combines hands-on mechanical maintenance with customer-facing service work, offering good variety and strong long-term stability. This role would suit a mechanically biased Maintenance Engineer or Mechanical Fitter who enjoys field-based problem solving, travel, varied site work and working with specialist industrial equipment. Electrical experience is useful, but the business is happy to provide training where needed. Responsibilities of a field service mechanical engineer: Carry out planned maintenance, repairs and first-line fault finding on industrial washing systems Replace worn or damaged components to maintain safe and reliable equipment performance Work on industrial conveyor systems, spray bars, air knives, bin lifts and utensil washers Support installations, commissioning and planned service work on customer sites across the UK Carry out TIG welding where required as part of repair and modification work Work independently on service visits or as part of a team on larger installations Maintain high standards of health, safety and customer service while working on site Complete service reports and communicate clearly with customers and internal teams Skills & qualifications of a field service mechanical engineer: Strong mechanical maintenance background within industrial, manufacturing or service environments Mechanical or maintenance qualifications beneficial but not essential TIG welding experience essential Experience working on conveyors, production equipment or industrial plant desirable Electrical fault-finding experience advantageous but not essential Ability to work independently and manage field-based workloads Good communication skills and customer-facing attitude Full UK driving licence required Benefits of a field service mechanical engineer: Salary: £33,000 £37,000 (with review based on experience) Monday to Thursday: 07 00 Friday: 07 00 Overtime paid at 1.5x UK-wide field-based role with varied customer sites and equipment Stop-out allowance including hotel accommodation plus meal allowance / £20 per night Pension scheme Training and development in electrical systems and specialist machinery Long-term stable role within a growing specialist engineering business If you feel this Field Service Mechanical Engineer role is right for you, please contact Dan Fergus at Maintech Recruitment for more information or click apply. Maintech Recruitment Engineering Great Careers Maintech Recruitment are an equal opportunities agency and welcome applications from all suitably qualified persons regardless of sex, religion, belief, political opinion, race, age, sexual orientation, marital status or disability. Please note by applying for this role your data will be processed in line with our privacy policy, available on our website. Top of Form Bottom of Form

My client is a leading FMCG manufacturing organisation with an impressive history and a fantastic reputation within the industries they serve. Due to a range of innovative developments and investment, they are going through an extensive period of growth. This includes new state-of-the-art manufacturing assets. They are now looking for a Mechanical Maintenance Engineer to join their site on the outskirts of Edinburgh. The successful candidate will be tasked with supporting the engineering team in reaching a higher level of standard. Responsibilities: Carry out planned and reactive maintenance on mechanical equipment as defined by our PPM schedule to the highest standard Work as part of a mechanical/electrical team, to keep our plant availability in line with operational commitments Assist with machine improvement projects Monitor, fault find, maintain and repair a wide variety of equipment including pumps, gearboxes, and specialist treatment process machinery Apply first level maintenance activities to all onsite assets Large plant complex repairs Using Breathing Apparatus and working in confined spaces if required (Training will be provided if required) Development of new skills both in and outside of your core discipline Working on fixed plant on Water and Waste Water Treatment sites to fault find, repair and maintain a wide variety of equipment including pumps, gearboxes, and specialist treatment process machinery. Work with other disciplines in a workshop team Follow the business and departmental rules associated with workflow and management An awareness of health and safety and works in a manner that keeps you and those around you safe Use our computerised maintenance management system to organise workload and work order response Education & Experience: All applicants should hold City & Guilds or similar vocational qualifications and have completed an apprenticeship or recognised training in mechanical discipline Relevant experience in a production / processing or manufacturing facility would be beneficial Well-developed interpersonal skills, ability to work in teams, to interact with colleagues and managers alike Excellent planning and organisational skills with the ability to take and respond to direction as required This is a Monday - Friday dayshift position

My client is a leading FMCG manufacturing organisation with an impressive history and a fantastic reputation within the industries they serve. Due to a range of innovative developments and investment, they are going through an extensive period of growth. This includes new state-of-the-art manufacturing assets. They are now looking for a Mechanical Maintenance Engineer to join their site on the outskirts of Edinburgh. The successful candidate will be tasked with supporting the engineering team in reaching a higher level of standard. Responsibilities: Carry out planned and reactive maintenance on mechanical equipment as defined by our PPM schedule to the highest standard Work as part of a mechanical/electrical team, to keep our plant availability in line with operational commitments Assist with machine improvement projects Monitor, fault find, maintain and repair a wide variety of equipment including pumps, gearboxes, and specialist treatment process machinery Apply first level maintenance activities to all onsite assets Large plant complex repairs Using Breathing Apparatus and working in confined spaces if required (Training will be provided if required) Development of new skills both in and outside of your core discipline Working on fixed plant on Water and Waste Water Treatment sites to fault find, repair and maintain a wide variety of equipment including pumps, gearboxes, and specialist treatment process machinery. Work with other disciplines in a workshop team Follow the business and departmental rules associated with workflow and management An awareness of health and safety and works in a manner that keeps you and those around you safe Use our computerised maintenance management system to organise workload and work order response Education & Experience: All applicants should hold City & Guilds or similar vocational qualifications and have completed an apprenticeship or recognised training in mechanical discipline Relevant experience in a production / processing or manufacturing facility would be beneficial Well-developed interpersonal skills, ability to work in teams, to interact with colleagues and managers alike Excellent planning and organisational skills with the ability to take and respond to direction as required This is a Monday - Friday dayshift position

Job Title: Electrical Fitter Location: Sunderland Hourly Rate: 18.25 per hour Shifts: Dayshift Early Finish Friday Benefits: Competitive hourly rate Overtime opportunities available Early finish every Friday Stable, long-term opportunity Supportive and safety-focused working environment Career progression and training opportunities The Company: An established and growing engineering business within the transport and commercial vehicle sector is looking to recruit an experienced Electrical Fitter to join its skilled workshop team. The company is recognised for delivering high-quality engineering and maintenance solutions while maintaining an excellent reputation for reliability, safety, and employee development. This is an exciting opportunity for an ambitious Electrical Fitter seeking long-term stability and career progression within a respected engineering environment. Job Description: As an Electrical Fitter , you will be responsible for carrying out electrical installation, maintenance, and repair work on a range of commercial and specialist vehicles. The successful Electrical Fitter will work from technical drawings and wiring diagrams to ensure all electrical systems are installed and maintained to the highest standards. Daily duties for the Electrical Fitter will include: Installing and fitting electrical components and systems Wiring, testing, and fault-finding on vehicle systems Reading and interpreting electrical drawings and schematics Diagnosing and repairing electrical faults Using electrical tools and testing equipment safely Supporting workshop teams to meet production deadlines Ensuring all work complies with health and safety regulations Skills & Experience: Previous experience as an Electrical Fitter or similar role Strong understanding of electrical systems and wiring Ability to read and interpret electrical diagrams Experience with fault-finding and diagnostics Knowledge of workshop tools and electrical testing equipment Strong attention to detail and problem-solving skills Experience within commercial vehicles, transport, or heavy engineering is advantageous

An opportunity has arisen with my client for an Electrical Fitter to join them on a 12-month contract. As the Electrical Fitter you will be responsible for carrying out manufacturing and test tasks within the electrical department, in accordance with product certification procedures, defined workmanship standards, allocated budgets and timescales to meet project objectives. Role: Electrical Fitter Pay: 28.35 per hour via umbrella (rising to 29.70 per hour after 12 weeks) Location: Bolton Contract: 12 Months Hours: Monday - Friday, 37 hours per week Security Clearance: BPSS Responsibilities: Certify the product in line with Product Certification procedure. Demonstrated ability / willingness to certify own work in line with company quality standards. Maintain product certification and approval via regular audits. Possess a versatile skill base with the capability to apply these skills across a range of tasks. Be fully conversant with all equipment, tools and measuring instruments associated with the manufacturing cycle. Ensure manufacturing build, inspection and where relevant test times are met. Check and complete all paperwork associated with the manufacturing data pack. Maintain to the highest level, workmanship standards and product quality. Ensure compliance with all associated procedures applicable to the manufacturing process. Maintain a safe working environment. Maintain a good housekeeping policy. Willing to contribute to an environment of process improvement Education/Qualifications Approved Apprenticeship/Apprenticeship Framework/Modern Apprenticeship OR Vocational G or H Units with Further Education, City & Guilds Parts 1, 2 & 3 OR Vocational TR23 Units with Further Education, ONC or City & Guilds Parts 1, 2 & 3 OR Vocational NVQ3 with Further Education, BTEC ONC/HNC Skills/Experince IPC 610 certified/ trained preferred. Possess experience in electrical wiring and assembly. Previous experience in the aerospace or defence industry would be desirable. Manual handling training. Lifting and slinging (including overhead cranes) training. ESD training. Please send your updated CV to: Natalie Dalkin at Line Up Aviation Line Up Aviation has carved its own place in the recruitment of Aviation and Aerospace personnel all over the world for more than 30 years. We work with some of the industry's best-known companies who demand the highest standard of applicants. " on Twitter for all of our latest vacancies, news and pictures from our busy UK Head Office. Interact with us using the tag at anytime! Thank you for your follow!"

CNC Service Engineer Wigan 40k-45k Shopfloor based Role Are you a skilled Mechanical fitter with some electrical experience? Have you had experience maintaining and servicing CNC Millers and Turners? Would you like to join an innovative and rapidly growing manufacturing company? If so, this role is for you. Lodestone Recruitment are currently recruiting on behalf of a well established manufacturing company based in Wigan, who are looking for a skilled CNC Service Engineer to join their team. They are looking for someone who can conduct maintenance (mostly mechanical with some electrical maintenance) on their CNC Machines, in order to optimise the machines and reduce their downtime. They are a company with a great reputation of looking after their staff, and boast a great employee retention rate. If you: Are an experienced mechanical fitter with basic electrical experience. Have serviced and maintained CNC Milling and Turning machines. Have experience in heavy engineering. This role is for you. As well as a great working environment, the company provides: Salary: 40k-45k depending on experience. Days Only Shopfloor based role Would this be an opportunity that you are interested in? Apply now if so. Lodestone Recruitment are acting as an employment agency with regards to this vacancy.