Expleo are actively recruiting for Development and Prototype Technicians to work within a state-of-the-art factory facility, with high performance road vehicles. Working within their highly experienced team, we are offering contract inside of IR35 opportunities, based in Surrey, where you will be working to assemble, maintain, prepare, and support the operation of, multi-project test and development vehicles and rigs. Please note Unsocial hours and frequent travel may be required as part of this role including regular off-site UK, European and occasional worldwide test support duties. Responsibilities: Build multi-project concept/mule/prototype and production level vehicles and simulation rigs to the highest standards, using specified processes where applicable. Preparation and operation of such vehicles for test and development activities at multiple locations, including industry proving grounds and racing circuits. Two-way interaction with design and engineering staff to establish and achieve requirements, specifications and targets. Knowledge, Skills & Experience: Extensive experience in motorsport/prototype/low volume/high performance complete vehicle builds, covering the manufacture, assembly and operating of such vehicles. Welding, machining and fabrication skills are preferred. Understanding of current automotive electrical and electronic systems to enable fault finding and repair would be advantageous. Experience of diagnostic platforms, especially MONaco, CANape and INCA is desirable. Clean driving licence & passport. IT literate in various packages e.g. Microsoft Office suite, Virtual Car. To make an application and to hear more about the roles available, please send your CV to (url removed) or call (phone number removed)
May 14, 2026
Contractor
Expleo are actively recruiting for Development and Prototype Technicians to work within a state-of-the-art factory facility, with high performance road vehicles. Working within their highly experienced team, we are offering contract inside of IR35 opportunities, based in Surrey, where you will be working to assemble, maintain, prepare, and support the operation of, multi-project test and development vehicles and rigs. Please note Unsocial hours and frequent travel may be required as part of this role including regular off-site UK, European and occasional worldwide test support duties. Responsibilities: Build multi-project concept/mule/prototype and production level vehicles and simulation rigs to the highest standards, using specified processes where applicable. Preparation and operation of such vehicles for test and development activities at multiple locations, including industry proving grounds and racing circuits. Two-way interaction with design and engineering staff to establish and achieve requirements, specifications and targets. Knowledge, Skills & Experience: Extensive experience in motorsport/prototype/low volume/high performance complete vehicle builds, covering the manufacture, assembly and operating of such vehicles. Welding, machining and fabrication skills are preferred. Understanding of current automotive electrical and electronic systems to enable fault finding and repair would be advantageous. Experience of diagnostic platforms, especially MONaco, CANape and INCA is desirable. Clean driving licence & passport. IT literate in various packages e.g. Microsoft Office suite, Virtual Car. To make an application and to hear more about the roles available, please send your CV to (url removed) or call (phone number removed)
A facilities management firm in the East Midlands is seeking a Mobile Fabric Technician to deliver planned and reactive maintenance across railway stations. The ideal candidate will have proven experience in fabric maintenance, be comfortable with a mobile role covering multiple sites, and possess a full UK driver's license. The position offers extensive training, a generous pension contribution, and flexible working arrangements to support a balanced work-life culture.
May 14, 2026
Full time
A facilities management firm in the East Midlands is seeking a Mobile Fabric Technician to deliver planned and reactive maintenance across railway stations. The ideal candidate will have proven experience in fabric maintenance, be comfortable with a mobile role covering multiple sites, and possess a full UK driver's license. The position offers extensive training, a generous pension contribution, and flexible working arrangements to support a balanced work-life culture.
Allegis Global Solutions Limited (AGS)
Reading, Berkshire
Duties and Responsibilities: Operate all systems within the buildings in a competent, effective, and efficient manner. Issue relevant site Permits as part of the Safe System of Work. Completion of PPM and Reactive Tasks and update the electronic workflow system keeping the records compliant. Ensure that daily checks are completed and repair, report any defects found via the FM helpdesk. Identification of materials required to be ordered & installed in a timely manner. Comply with both statutory and company health, safety and environmental regulations and policies. Ensure that Specialist Service Provider worksheets are reviewed & signed off, the quality of work is inspected, and recommendations are escalated to the Supervisor. The Site team will ensure that Plant areas, workshops, stores, changing/rest areas etc. are kept to the highest level of housekeeping The Engineer will be expected to work, and trouble shoot all building systems but not be limited to the following: Decorating and general fabric repairs Small plumbing repairs Building Management Systems & Minor Electrical Monitoring (Training Given). HVAC Systems, Including Humidifiers (Training Given). Air Handling, Air Conditioning & Chillers (Training Given). Domestic Water Services & Plumbing. Pumps, Motors & Variable Speed Drive (Training Given). Hot Water Calorifiers (Training Given). Fire Systems (Training Given). Previous knowledge of a compliance role an advantage Skills: Appropriate experience within Building Fabric Services Excellent communication skills and the ability to deal with staff and Customers at all levels Experience as an end user of a Building Management Systems (Trend). (Training Given). Intermediate computer literacy using Windows Office applications (Word, Excel, and Outlook) PDA & Tablet use. Self-motivated and able to work on own initiative as well as part of a team. Excellent numeracy and literacy skills, with experience of report writing. Be able to adapt and work as a team outside of their trade but within their capabilities. Qualifications: Advantage C&G or equivalent experience in Fabric Engineering. Legionella Awareness - L8 ACOP. Be conversant with current Health and Safety legislation with relevance to safe working practices. Sound level of administration/organisational skills & computer skills.
May 13, 2026
Contractor
Duties and Responsibilities: Operate all systems within the buildings in a competent, effective, and efficient manner. Issue relevant site Permits as part of the Safe System of Work. Completion of PPM and Reactive Tasks and update the electronic workflow system keeping the records compliant. Ensure that daily checks are completed and repair, report any defects found via the FM helpdesk. Identification of materials required to be ordered & installed in a timely manner. Comply with both statutory and company health, safety and environmental regulations and policies. Ensure that Specialist Service Provider worksheets are reviewed & signed off, the quality of work is inspected, and recommendations are escalated to the Supervisor. The Site team will ensure that Plant areas, workshops, stores, changing/rest areas etc. are kept to the highest level of housekeeping The Engineer will be expected to work, and trouble shoot all building systems but not be limited to the following: Decorating and general fabric repairs Small plumbing repairs Building Management Systems & Minor Electrical Monitoring (Training Given). HVAC Systems, Including Humidifiers (Training Given). Air Handling, Air Conditioning & Chillers (Training Given). Domestic Water Services & Plumbing. Pumps, Motors & Variable Speed Drive (Training Given). Hot Water Calorifiers (Training Given). Fire Systems (Training Given). Previous knowledge of a compliance role an advantage Skills: Appropriate experience within Building Fabric Services Excellent communication skills and the ability to deal with staff and Customers at all levels Experience as an end user of a Building Management Systems (Trend). (Training Given). Intermediate computer literacy using Windows Office applications (Word, Excel, and Outlook) PDA & Tablet use. Self-motivated and able to work on own initiative as well as part of a team. Excellent numeracy and literacy skills, with experience of report writing. Be able to adapt and work as a team outside of their trade but within their capabilities. Qualifications: Advantage C&G or equivalent experience in Fabric Engineering. Legionella Awareness - L8 ACOP. Be conversant with current Health and Safety legislation with relevance to safe working practices. Sound level of administration/organisational skills & computer skills.
Mobile Building Fabric Technician / Handyperson Location: M1 3BN. Mobile across the North West Hours: Monday - Friday, 08:00 - 17:00 Benefits 25 days holiday plus Bank Holidays Company Van Life assurance Employee discounts via Perkbox Access to a virtual GP Access to a health & wellbeing app Training & Development Enhanced overtime rates Responsibilities Plan and perform reactive maintenance at client premises. Install, maintain and repair fabric systems and components. Assist with other duties including plumbing PPM and reactive tasks. Diagnose and correct problems; select appropriate materials and provide advice to clients, contractors and other professionals. Communicate professionally with clients/tenants as required. Work 40 hours per week, with flexibility for service delivery. Qualifications and Requirements Recognised industry qualifications or equivalent training in electrical, mechanical, plumbing or carpentry, or previous experience in a similar role. Broad knowledge and experience of building services systems, maintenance management and health and safety procedures. IT literacy. Valid UK Driving licence. Basic knowledge of plumbing, carpentry, or electrical.
May 13, 2026
Full time
Mobile Building Fabric Technician / Handyperson Location: M1 3BN. Mobile across the North West Hours: Monday - Friday, 08:00 - 17:00 Benefits 25 days holiday plus Bank Holidays Company Van Life assurance Employee discounts via Perkbox Access to a virtual GP Access to a health & wellbeing app Training & Development Enhanced overtime rates Responsibilities Plan and perform reactive maintenance at client premises. Install, maintain and repair fabric systems and components. Assist with other duties including plumbing PPM and reactive tasks. Diagnose and correct problems; select appropriate materials and provide advice to clients, contractors and other professionals. Communicate professionally with clients/tenants as required. Work 40 hours per week, with flexibility for service delivery. Qualifications and Requirements Recognised industry qualifications or equivalent training in electrical, mechanical, plumbing or carpentry, or previous experience in a similar role. Broad knowledge and experience of building services systems, maintenance management and health and safety procedures. IT literacy. Valid UK Driving licence. Basic knowledge of plumbing, carpentry, or electrical.
Location: Hailsham, East Sussex, UK Salary: Up to 26,860 DOE Job Type: Full-Time, Permanent Overview We have an exciting opportunity for a Manufacturing Prep Technician to join a highly respected engineering and manufacturing business specialising in precision-engineered components and advanced manufacturing processes. This role will involve cleaning, inspecting, packaging, and preparing components and assemblies to extremely high standards within a fast-paced manufacturing environment. You will also support bead blasting activities, leak checking operations, quality inspections, and ensure all work is completed in line with strict quality and health & safety standards. Working Hours Full-time permanent position Flexible shifts within opening hours Monday to Thursday Early finish on Fridays No weekend work Qualifications Engineering or manufacturing qualifications advantageous but not essential Essential Requirements Candidates will only be considered if they meet all essential requirements below: Previous experience within a manufacturing, engineering, or production environment Ability to follow work instructions and quality procedures accurately Experience working with chemicals and understanding associated health and safety requirements Strong attention to detail and quality standards Ability to work to deadlines without compromising quality Good understanding of workplace health and safety Reliable, motivated, and able to work effectively within a team Desirable Requirements Experience with bead blasting Previous vacuum industry experience Knowledge of welding or fabrication processes BTEC/HNC/HND in Engineering or Manufacturing Interest in engineering or technology environments Apply Now If you are looking to build your career within a precision engineering and manufacturing environment, apply today with your latest CV. Due to the high volume of applications Recruited UK receives, we will make every effort to respond with feedback although this is not always possible. If you have not been contacted within 5 days, then unfortunately you have not been successful on this occasion, but we may keep your details on file and contact you with future opportunities.
May 13, 2026
Full time
Location: Hailsham, East Sussex, UK Salary: Up to 26,860 DOE Job Type: Full-Time, Permanent Overview We have an exciting opportunity for a Manufacturing Prep Technician to join a highly respected engineering and manufacturing business specialising in precision-engineered components and advanced manufacturing processes. This role will involve cleaning, inspecting, packaging, and preparing components and assemblies to extremely high standards within a fast-paced manufacturing environment. You will also support bead blasting activities, leak checking operations, quality inspections, and ensure all work is completed in line with strict quality and health & safety standards. Working Hours Full-time permanent position Flexible shifts within opening hours Monday to Thursday Early finish on Fridays No weekend work Qualifications Engineering or manufacturing qualifications advantageous but not essential Essential Requirements Candidates will only be considered if they meet all essential requirements below: Previous experience within a manufacturing, engineering, or production environment Ability to follow work instructions and quality procedures accurately Experience working with chemicals and understanding associated health and safety requirements Strong attention to detail and quality standards Ability to work to deadlines without compromising quality Good understanding of workplace health and safety Reliable, motivated, and able to work effectively within a team Desirable Requirements Experience with bead blasting Previous vacuum industry experience Knowledge of welding or fabrication processes BTEC/HNC/HND in Engineering or Manufacturing Interest in engineering or technology environments Apply Now If you are looking to build your career within a precision engineering and manufacturing environment, apply today with your latest CV. Due to the high volume of applications Recruited UK receives, we will make every effort to respond with feedback although this is not always possible. If you have not been contacted within 5 days, then unfortunately you have not been successful on this occasion, but we may keep your details on file and contact you with future opportunities.
About the Role: As a CBRE Fabric Technician, you will be responsible for proactive and reactive building maintenance and repair services for client contracts. This job is part of the Engineering and Technical Services job function. They are responsible for providing support, preventive maintenance, and repairs on equipment and systems. What You'll Do: Support clients in an efficient and courteous manner, with a strong focus on customer care. Perform ongoing preventive maintenance and repairs on facilities. Assist with the installation and modification of building equipment and systems. Inspect new or existing installations for compliance with building codes and safety regulations. Assist engineering staff in a wide range of duties as required. Respond to common inquiries or complaints from clients, co-workers, and supervisors. Take measures to ensure that all systems are operating in the most efficient manner. Use existing procedures to solve straightforward problems while having a limited opportunity to exercise discretion. Impact through clearly defined duties, methods, and tasks are described in detail. Deliver own output by following defined procedures and processes under close supervision and guidance. What You'll Need: High School Diploma, GED, or trade school diploma with 1-2 years of job-related experience. In lieu of a diploma, a combination of experience and education will be considered. Valid Driver's license required. Meet the physical requirements of this role including stooping, standing, walking, climbing stairs/ladders, and the ability to lift/carry heavy loads of 50 lbs. or more. Ability to follow basic work routines and standards in the application of work. Communication skills to exchange straightforward information. Working knowledge of Microsoft Office products. Examples include Word, Excel, Outlook, etc. Strong organizational skills with an inquisitive mindset.
May 13, 2026
Full time
About the Role: As a CBRE Fabric Technician, you will be responsible for proactive and reactive building maintenance and repair services for client contracts. This job is part of the Engineering and Technical Services job function. They are responsible for providing support, preventive maintenance, and repairs on equipment and systems. What You'll Do: Support clients in an efficient and courteous manner, with a strong focus on customer care. Perform ongoing preventive maintenance and repairs on facilities. Assist with the installation and modification of building equipment and systems. Inspect new or existing installations for compliance with building codes and safety regulations. Assist engineering staff in a wide range of duties as required. Respond to common inquiries or complaints from clients, co-workers, and supervisors. Take measures to ensure that all systems are operating in the most efficient manner. Use existing procedures to solve straightforward problems while having a limited opportunity to exercise discretion. Impact through clearly defined duties, methods, and tasks are described in detail. Deliver own output by following defined procedures and processes under close supervision and guidance. What You'll Need: High School Diploma, GED, or trade school diploma with 1-2 years of job-related experience. In lieu of a diploma, a combination of experience and education will be considered. Valid Driver's license required. Meet the physical requirements of this role including stooping, standing, walking, climbing stairs/ladders, and the ability to lift/carry heavy loads of 50 lbs. or more. Ability to follow basic work routines and standards in the application of work. Communication skills to exchange straightforward information. Working knowledge of Microsoft Office products. Examples include Word, Excel, Outlook, etc. Strong organizational skills with an inquisitive mindset.
Mechanical Maintenance Technician Warrington £13.00 per hour A well-established industrial engineering business in Warrington is seeking a hands-on Mechanical Maintenance Technician to support the Maintenance Manager in a varied and physically active role. This position is part of a long-term succession plan. The successful candidate will work closely with the Maintenance Manager, gaining in-depth knowledge of specialist refractory equipment and site operations, with the opportunity to take ownership of the role over time. This role would suit someone from a small plant, workshop, or heavy equipment background who is comfortable working with robust, heavy-duty machinery and enjoys practical, hands-on work. Mechanical Maintenance Technician Key Responsibilities: Support the Maintenance Manager in maintaining and repairing specialised refractory and industrial equipment Carry out mechanical maintenance, fault finding, and general workshop repairs Undertake basic fabrication tasks including welding, cutting, and grinding Assist with upkeep of plant machinery and workshop equipment Support goods-inwards operations, including unloading deliveries using a forklift truck Assist with stock control, parts management, and general organisation of the workshop Maintain safe working practices and high housekeeping standards Mechanical Maintenance Technician Requirements: Experience maintaining industrial machinery, plant equipment, or similar heavy-duty kit Strong mechanical background (engineering, maintenance, or workshop-based) Basic welding, cutting, and grinding skills Good all-round workshop repair capability Basic understanding of electrical systems and safe working practices (not an electrician role) Valid Forklift Truck licence Comfortable working in a physically demanding, industrial environment Ideal Candidate Hands-on, practical thinker who enjoys problem-solving Takes pride in their work and maintains high standards Organised and detail-focused, particularly with stock and parts control Reliable, self-motivated, and proactive Willing to learn and develop within a specialist industry Comfortable working with heavy, sometimes rough equipment What's on Offer £13.00 per hour Full training on specialised refractory equipment Clear long-term progression into a senior/lead maintenance role Opportunity to take ownership of the function over time Stable role within a well-established industrial business BH35661
May 13, 2026
Full time
Mechanical Maintenance Technician Warrington £13.00 per hour A well-established industrial engineering business in Warrington is seeking a hands-on Mechanical Maintenance Technician to support the Maintenance Manager in a varied and physically active role. This position is part of a long-term succession plan. The successful candidate will work closely with the Maintenance Manager, gaining in-depth knowledge of specialist refractory equipment and site operations, with the opportunity to take ownership of the role over time. This role would suit someone from a small plant, workshop, or heavy equipment background who is comfortable working with robust, heavy-duty machinery and enjoys practical, hands-on work. Mechanical Maintenance Technician Key Responsibilities: Support the Maintenance Manager in maintaining and repairing specialised refractory and industrial equipment Carry out mechanical maintenance, fault finding, and general workshop repairs Undertake basic fabrication tasks including welding, cutting, and grinding Assist with upkeep of plant machinery and workshop equipment Support goods-inwards operations, including unloading deliveries using a forklift truck Assist with stock control, parts management, and general organisation of the workshop Maintain safe working practices and high housekeeping standards Mechanical Maintenance Technician Requirements: Experience maintaining industrial machinery, plant equipment, or similar heavy-duty kit Strong mechanical background (engineering, maintenance, or workshop-based) Basic welding, cutting, and grinding skills Good all-round workshop repair capability Basic understanding of electrical systems and safe working practices (not an electrician role) Valid Forklift Truck licence Comfortable working in a physically demanding, industrial environment Ideal Candidate Hands-on, practical thinker who enjoys problem-solving Takes pride in their work and maintains high standards Organised and detail-focused, particularly with stock and parts control Reliable, self-motivated, and proactive Willing to learn and develop within a specialist industry Comfortable working with heavy, sometimes rough equipment What's on Offer £13.00 per hour Full training on specialised refractory equipment Clear long-term progression into a senior/lead maintenance role Opportunity to take ownership of the function over time Stable role within a well-established industrial business BH35661
CBRE Global Workplace Solutions is a leading global provider of integrated facilities and corporate real estate management. Reporting to the Site Facilities Manager, the Technical Services Manager will be accountable for the successful management and delivery of all onsite technical/engineering services. They will demonstrate strong leadership qualities of a team of 5 technicians (including a supervisor), the Technical Services Team are responsible for ensuring the site and team are compliant with statutory and legislative requirements. Working with the Facilities Manager and wider FM Team (on site and on account) the Technical Services Manager will support our client in creating and overseeing maintenance strategies, such as asset life cycle plans, 5-year asset management plans and energy saving initiatives. Responsibilities Accountable for successful management and delivery of all onsite technical/engineering services. Demonstrate strong leadership qualities to drive performance across the expanding business and team. Develop and oversee engineering/technical strategies for site/s, including life cycle management plan of site assets and energy savings initiatives. Maintaining and updating asset lists and PPM schedules. Ensure the overall performance of the site/s and required deliverables, including; contract compliance, performance management against KPIs, cost saving initiatives and customer satisfaction. To successfully implement initiatives and programs including; financial savings program, energy program, training and development of technical team, and succession planning. Lead technical team, including Technical Supervisor and 4x technicians. Enhance culture of 'best in class' for wider team to adopt and follow. Developing scope of works for technical works/projects. Provide advice and information to projects team to support with successful delivery of capital projects. Driving continuous improvement of CMMS/CAFM systems. Build positive relationships with client and key stakeholders. Ensure company and client QHSE/HSE standards and expectations are always met through the delivery of technical services. Ensure compliance with regulatory and legislative requirements relating to all onsite technical/engineering services. Experience Required Previous experience in a corporate facilities management environment. Extensive building management/technical services experience and understanding of legislative requirements Excellent understanding of technical services (HVAC, BMS, life safety systems, building structure, fabric/fa ade, lighting systems etc. Excellent understanding of CMMS/CAFM systems operation. Understanding and experience with SFG20 standard. Circumstances Full time - 40 Hours, Monday to Friday. Core hours 7:30 to 16:30, but site is managed flexibly. Some out of hours/weekend support may be required.
May 12, 2026
Full time
CBRE Global Workplace Solutions is a leading global provider of integrated facilities and corporate real estate management. Reporting to the Site Facilities Manager, the Technical Services Manager will be accountable for the successful management and delivery of all onsite technical/engineering services. They will demonstrate strong leadership qualities of a team of 5 technicians (including a supervisor), the Technical Services Team are responsible for ensuring the site and team are compliant with statutory and legislative requirements. Working with the Facilities Manager and wider FM Team (on site and on account) the Technical Services Manager will support our client in creating and overseeing maintenance strategies, such as asset life cycle plans, 5-year asset management plans and energy saving initiatives. Responsibilities Accountable for successful management and delivery of all onsite technical/engineering services. Demonstrate strong leadership qualities to drive performance across the expanding business and team. Develop and oversee engineering/technical strategies for site/s, including life cycle management plan of site assets and energy savings initiatives. Maintaining and updating asset lists and PPM schedules. Ensure the overall performance of the site/s and required deliverables, including; contract compliance, performance management against KPIs, cost saving initiatives and customer satisfaction. To successfully implement initiatives and programs including; financial savings program, energy program, training and development of technical team, and succession planning. Lead technical team, including Technical Supervisor and 4x technicians. Enhance culture of 'best in class' for wider team to adopt and follow. Developing scope of works for technical works/projects. Provide advice and information to projects team to support with successful delivery of capital projects. Driving continuous improvement of CMMS/CAFM systems. Build positive relationships with client and key stakeholders. Ensure company and client QHSE/HSE standards and expectations are always met through the delivery of technical services. Ensure compliance with regulatory and legislative requirements relating to all onsite technical/engineering services. Experience Required Previous experience in a corporate facilities management environment. Extensive building management/technical services experience and understanding of legislative requirements Excellent understanding of technical services (HVAC, BMS, life safety systems, building structure, fabric/fa ade, lighting systems etc. Excellent understanding of CMMS/CAFM systems operation. Understanding and experience with SFG20 standard. Circumstances Full time - 40 Hours, Monday to Friday. Core hours 7:30 to 16:30, but site is managed flexibly. Some out of hours/weekend support may be required.
HGV Technician - Earn 60,000+ in a Stable, Well-Paid Workshop Role West Thurrock, Essex 49,140 Basic + Overtime OTE 60,000+ Full-Time 45 Hours Per Week Tired of Being Undervalued? If you're an experienced HGV Technician who's fed up with poor management, unrealistic workloads, or workshops that don't appreciate skilled engineers - this is the opportunity you've been waiting for. We're looking for a proven HGV Unit/Trailer Technician to join a busy, established workshop in West Thurrock where your experience is respected, your overtime is available, and your earning potential is real. This is not a dead-end role. It's a long-term opportunity with a company that has built its reputation over 35+ years by investing in good people and keeping skilled technicians happy. What's In It For You? 49,140 guaranteed basic salary Overtime paid at 26 per hour Realistic 60,000+ earnings Stable, full-time position Supportive workshop environment Modern facilities and varied work Ongoing training and development On-site parking Pension scheme 28 days holiday including bank holidays The Work You'll be working on a wide range of HGV units and trailers carrying out: Servicing and maintenance Diagnostics and fault finding Repairs and MOT prep Trailer work Welding/fabrication work where applicable You'll have the freedom to get on with the job properly while working alongside experienced professionals who know the industry inside out. What We Need From You Minimum 5 years' HGV/trailer experience NVQ Level 3 or equivalent qualification Strong diagnostic skills Ability to work independently and as part of a team Full UK driving licence Bonus points if you hold a Class 1 licence or welding qualifications - and support can be provided to gain additional licences. Why Technicians Stay Here Because the workshop is organised. Because the overtime is there if you want it. Because management understands the trade. Because good technicians are treated properly. To apply, send your CV to (url removed) For more information, call (phone number removed) If this role is not right for you but would suit a friend or colleague, paid referral fees are available for successful placements. INDHP
May 12, 2026
Full time
HGV Technician - Earn 60,000+ in a Stable, Well-Paid Workshop Role West Thurrock, Essex 49,140 Basic + Overtime OTE 60,000+ Full-Time 45 Hours Per Week Tired of Being Undervalued? If you're an experienced HGV Technician who's fed up with poor management, unrealistic workloads, or workshops that don't appreciate skilled engineers - this is the opportunity you've been waiting for. We're looking for a proven HGV Unit/Trailer Technician to join a busy, established workshop in West Thurrock where your experience is respected, your overtime is available, and your earning potential is real. This is not a dead-end role. It's a long-term opportunity with a company that has built its reputation over 35+ years by investing in good people and keeping skilled technicians happy. What's In It For You? 49,140 guaranteed basic salary Overtime paid at 26 per hour Realistic 60,000+ earnings Stable, full-time position Supportive workshop environment Modern facilities and varied work Ongoing training and development On-site parking Pension scheme 28 days holiday including bank holidays The Work You'll be working on a wide range of HGV units and trailers carrying out: Servicing and maintenance Diagnostics and fault finding Repairs and MOT prep Trailer work Welding/fabrication work where applicable You'll have the freedom to get on with the job properly while working alongside experienced professionals who know the industry inside out. What We Need From You Minimum 5 years' HGV/trailer experience NVQ Level 3 or equivalent qualification Strong diagnostic skills Ability to work independently and as part of a team Full UK driving licence Bonus points if you hold a Class 1 licence or welding qualifications - and support can be provided to gain additional licences. Why Technicians Stay Here Because the workshop is organised. Because the overtime is there if you want it. Because management understands the trade. Because good technicians are treated properly. To apply, send your CV to (url removed) For more information, call (phone number removed) If this role is not right for you but would suit a friend or colleague, paid referral fees are available for successful placements. INDHP
Fabric Technician We are looking for a multi skilled and proactive Fabric Technician to join our dynamic Workplace Management team at a prestigious client site in London. In this hands-on role, you will be responsible for maintaining the physical fabric of the building to the highest standards, ensuring a safe, compliant, and first-class environment for our clients and their employees click apply for full job details
May 12, 2026
Full time
Fabric Technician We are looking for a multi skilled and proactive Fabric Technician to join our dynamic Workplace Management team at a prestigious client site in London. In this hands-on role, you will be responsible for maintaining the physical fabric of the building to the highest standards, ensuring a safe, compliant, and first-class environment for our clients and their employees click apply for full job details
Job title: Mechanical Technician (Shift-Based Role) Location: Royston, UK (on-site) 2 positions open for day's shift - Salary £44,113 + 20% shift allowance - lunch allowance £396.25 = £53,331.85 + benefits 1 position open for 24/7 shift - Salary £44,113 + 35% shift allowance - lunch allowance £792.50 = £60,345.05 + benefits World-changing careers, enabled by Johnson Matthey. With more than 200 years history, join us and help to accelerate the transition to net-zero! You'll contribute to JM's mission as a world leader in sustainable technology, transforming energy and reducing carbon emissions for a cleaner, brighter future. As a mechanical Technician, you will join an established Mechanical Team within our top tier COMAH site, this role requires an experienced Industrial Mechanically biased maintenance technician who is able to demonstrate and execute a wide range of practical Mechanical skills, ranging from basic workshop skills including fabrication of pipework, steelwork, and plastics to working out on plant in a methodical & logical manner such that reactive faults can be identified and repaired safely, alongside working proactively by working on Planned maintenance & Routines scheduled by our Maintenance planner. As a Mechanical Technician, you will help drive our goals by: Responsible for the delivery of preventative/proactive maintenance of Mechanical systems and its sub or support systems Attending to any reactive/corrective maintenance that arises Fault finding, completing any repairs/replacements/calibration or set-up, installation of new systems/equipment, commissioning alongside operations on returning to service Contribute to improving the site performance in all aspects of safe operation, regulatory compliance, productive output and cost efficiency by improving the engineering reliability of site equipment and ensuring appropriate maintenance frequency of assets is complied with. Key skills that will help you succeed in this role: Previous Manufacturing/Chemical industry experience Knowledge and experience of site services, Gas, Compressed air, Steam, cooling water and how to deenergise and work on safely. Knowledge and use of technical drawings & operator manuals alongside Mechanical exploded view/cross sectional drawings & P&ID's to aid fault diagnosis process. Even if you only match some of the skills, we'd love to hear from you to discuss further! What we offer: We make sure salaries are fair, competitive and aligned to individual roles, experience and responsibilities. We are also supportive of hybrid and flexible working and offer benefits that support our employees' financial and physical wellbeing, such as: Competitive Retirement savings Company-matched Share Incentive Plan Life Assurance, Income Protection and Critical Illness Medical Plans/Health Assessments Retailer and Wellbeing Discounts Competitive Annual Incentive Plan Ready to make a meaningful impact on your career and the environment? Join us and help shape a sustainable future while advancing your career! At JM, inclusivity is central to our values. We create an environment where everyone can thrive, embracing diverse perspectives to tackle challenges and ensure all colleagues feel valued and connected. For any queries or accessibility requirements, please contact (url removed). We will work with you to make suitable adjustments at any stage of the recruitment process. All conversations are confidential, and your feedback is welcome to help us provide an accessible and positive recruitment experience. Closing date for applications: This job advertisement will be posted for a minimum of 2 weeks, early application is advised. To submit your application, please click the "Apply" button online. All applications are carefully considered and your details will be stored on our secure Application Management System. This is used throughout Johnson Matthey for the selection of suitable candidates for our vacancies as they arise.Johnson Matthey respects your privacy and is committed to protecting your personal information. For more information about how your personal data is used please view our privacy notice: Johnson Matthey Privacy Notice . By applying for this role and creating an account you are agreeing to the notice. Johnson Matthey Plc is an equal opportunities employer and positively encourages applications from suitably qualified and eligible candidates regardless of sex, race, disability, age, sexual orientation, marriage or civil partnership, pregnancy or maternity, religion or belief.
May 12, 2026
Full time
Job title: Mechanical Technician (Shift-Based Role) Location: Royston, UK (on-site) 2 positions open for day's shift - Salary £44,113 + 20% shift allowance - lunch allowance £396.25 = £53,331.85 + benefits 1 position open for 24/7 shift - Salary £44,113 + 35% shift allowance - lunch allowance £792.50 = £60,345.05 + benefits World-changing careers, enabled by Johnson Matthey. With more than 200 years history, join us and help to accelerate the transition to net-zero! You'll contribute to JM's mission as a world leader in sustainable technology, transforming energy and reducing carbon emissions for a cleaner, brighter future. As a mechanical Technician, you will join an established Mechanical Team within our top tier COMAH site, this role requires an experienced Industrial Mechanically biased maintenance technician who is able to demonstrate and execute a wide range of practical Mechanical skills, ranging from basic workshop skills including fabrication of pipework, steelwork, and plastics to working out on plant in a methodical & logical manner such that reactive faults can be identified and repaired safely, alongside working proactively by working on Planned maintenance & Routines scheduled by our Maintenance planner. As a Mechanical Technician, you will help drive our goals by: Responsible for the delivery of preventative/proactive maintenance of Mechanical systems and its sub or support systems Attending to any reactive/corrective maintenance that arises Fault finding, completing any repairs/replacements/calibration or set-up, installation of new systems/equipment, commissioning alongside operations on returning to service Contribute to improving the site performance in all aspects of safe operation, regulatory compliance, productive output and cost efficiency by improving the engineering reliability of site equipment and ensuring appropriate maintenance frequency of assets is complied with. Key skills that will help you succeed in this role: Previous Manufacturing/Chemical industry experience Knowledge and experience of site services, Gas, Compressed air, Steam, cooling water and how to deenergise and work on safely. Knowledge and use of technical drawings & operator manuals alongside Mechanical exploded view/cross sectional drawings & P&ID's to aid fault diagnosis process. Even if you only match some of the skills, we'd love to hear from you to discuss further! What we offer: We make sure salaries are fair, competitive and aligned to individual roles, experience and responsibilities. We are also supportive of hybrid and flexible working and offer benefits that support our employees' financial and physical wellbeing, such as: Competitive Retirement savings Company-matched Share Incentive Plan Life Assurance, Income Protection and Critical Illness Medical Plans/Health Assessments Retailer and Wellbeing Discounts Competitive Annual Incentive Plan Ready to make a meaningful impact on your career and the environment? Join us and help shape a sustainable future while advancing your career! At JM, inclusivity is central to our values. We create an environment where everyone can thrive, embracing diverse perspectives to tackle challenges and ensure all colleagues feel valued and connected. For any queries or accessibility requirements, please contact (url removed). We will work with you to make suitable adjustments at any stage of the recruitment process. All conversations are confidential, and your feedback is welcome to help us provide an accessible and positive recruitment experience. Closing date for applications: This job advertisement will be posted for a minimum of 2 weeks, early application is advised. To submit your application, please click the "Apply" button online. All applications are carefully considered and your details will be stored on our secure Application Management System. This is used throughout Johnson Matthey for the selection of suitable candidates for our vacancies as they arise.Johnson Matthey respects your privacy and is committed to protecting your personal information. For more information about how your personal data is used please view our privacy notice: Johnson Matthey Privacy Notice . By applying for this role and creating an account you are agreeing to the notice. Johnson Matthey Plc is an equal opportunities employer and positively encourages applications from suitably qualified and eligible candidates regardless of sex, race, disability, age, sexual orientation, marriage or civil partnership, pregnancy or maternity, religion or belief.
Manual Machinist (Lathe Experience) Permanent Position Salary: Dependant on experience Location: Swindon Our client is a leading company specialising in the development and production of advanced materials and solutions. They are currently seeking a skilled Manual Machinist to join their workshop team. The successful candidate will primarily be responsible for the manual machining of precision components using centre lathes, along with supporting the assembly and testing of plasma torches and related equipment.The role will also involve general workshop activities including fabrication and mechanical assembly. TIG welding experience would be advantageous but is not essential. Manual Machinist - Job Description Manual machining of components using centre lathes and other workshop machinery. Manufacture and testing of mechanical components and assemblies. Assemble, inspect, and test special-purpose machinery. Perform fitting and maintenance on plant and workshop equipment. Support workshop operations during plasma trials when required. Carry out additional tasks as required in line with business needs. Manual Machinist - Essential Qualifications / Experience / Skills Minimum 3 years' experience in a manual machining role. Strong experience using manual centre lathes. Ability to interpret technical drawings and manufacture components to specification. Experience using manual workshop machinery such as turret mills and pillar drills. Good mechanical assembly and fitting skills. Desirable Skills TIG welding experience (advantageous but not essential). General fabrication or workshop experience.
May 12, 2026
Full time
Manual Machinist (Lathe Experience) Permanent Position Salary: Dependant on experience Location: Swindon Our client is a leading company specialising in the development and production of advanced materials and solutions. They are currently seeking a skilled Manual Machinist to join their workshop team. The successful candidate will primarily be responsible for the manual machining of precision components using centre lathes, along with supporting the assembly and testing of plasma torches and related equipment.The role will also involve general workshop activities including fabrication and mechanical assembly. TIG welding experience would be advantageous but is not essential. Manual Machinist - Job Description Manual machining of components using centre lathes and other workshop machinery. Manufacture and testing of mechanical components and assemblies. Assemble, inspect, and test special-purpose machinery. Perform fitting and maintenance on plant and workshop equipment. Support workshop operations during plasma trials when required. Carry out additional tasks as required in line with business needs. Manual Machinist - Essential Qualifications / Experience / Skills Minimum 3 years' experience in a manual machining role. Strong experience using manual centre lathes. Ability to interpret technical drawings and manufacture components to specification. Experience using manual workshop machinery such as turret mills and pillar drills. Good mechanical assembly and fitting skills. Desirable Skills TIG welding experience (advantageous but not essential). General fabrication or workshop experience.
Job Title: Electrical and Multi- Skilled Technician Location: Royston, UK & Enfield, North London (site based) 1 Multi Skilled Technician (M&E)- Day shift, Monday- Friday - Salary: £45,589 plus free lunch, discretionary bonus and benefits 2 Electrical Engineer's - 24/7 shift - Salary £ 44,113.00 + 35% shift allowance + lunch allowance = £60,345.05 1 Instrument Technician - 24/7 shift - Salary £43,765.00 % shift allowance + lunch allowance = £59,875.25 World-changing careers, enabled by Johnson Matthey. With more than 200 years history, join us and help to accelerate the transition to net-zero! As an Electrical Technician, you'll contribute to JM's mission as a world leader in sustainable technology, transforming energy and reducing carbon emissions for a cleaner, brighter future. Here at JM, we are hiring Electrical, Instrument and Multi skilled Technician's to join our PGMS business. Platinum Group Metal Services (PGMS) is one of four businesses within the Efficient Natural Resources Sector that manages, distributes, refines and recycles precious metals and fabricates products using precious metals and related materials. The business unit also manufactures platinum group metals, minor metal compounds, organometallics and fine metal powders for high technology applications, as well as providing a range of management services for platinum group metals. The role: As an Electrical Technician, you will help drive our goals by: Safety should always be the highest priority for any tasks undertaken, in conjunction with our life saving policies and procedures Use of technical drawings & operator manuals alongside electrical schematic drawings & P&ID's to aid fault diagnosis process Reduce Plant downtime by proposing/implementing improvements in both the Electrical and instrumentation facets of the role Contribute to improving the site performance in all aspects of safe operation, regulatory compliance, productive output and cost efficiency by improving the engineering reliability of site equipment and ensuring appropriate maintenance frequency of assets is complied with and keep accurate written records of work carried out using SAP CMMS system Work alongside compliance & technical author to support the technical review of written maintenance documents and operational procedures Conducting Inspections, testing, calibration, adjustments and monitoring tasks as required to maintain efficient plant and build-in equipment reliability Key skills that will help you succeed in this role: An industrial Electrical and Instrumentation -based qualification to HNC/ONC level or equivalent Time served Apprenticeship with a further 5 years' experience Previous Manufacturing/Chemical industry experience Experience of structured problem-solving techniques, fault diagnosis What we offer: We make sure salaries are fair, competitive and aligned to individual roles, experience and responsibilities. We are also supportive of hybrid and flexible working and where applicable, offer life, medical and other benefits that support our employees' financial and physical wellbeing, such as: Retirement savings Share plans Saving accounts House saving funds Life and disability insurance Commuter allowances and loans Medical plans / health assessments Fitness discounts Ready to make a meaningful impact on your career and the environment? Join us and help shape a sustainable future while advancing your career! At JM, inclusivity is central to our values. We create an environment where everyone can thrive, embracing diverse perspectives to tackle challenges and ensure all colleagues feel valued and connected. For any queries or accessibility requirements, please contact (url removed). We will work with you to make suitable adjustments at any stage of the recruitment process. All conversations are confidential, and your feedback is welcome to help us provide an accessible and positive recruitment experience. Closing date for applications: This job advertisement will be posted for a minimum of 2 weeks, early application is advised. To submit your application, please click the "Apply" button online. All applications are carefully considered and your details will be stored on our secure Application Management System. This is used throughout Johnson Matthey for the selection of suitable candidates for our vacancies as they arise.Johnson Matthey respects your privacy and is committed to protecting your personal information. For more information about how your personal data is used please view our privacy notice: Johnson Matthey Privacy Notice . By applying for this role and creating an account you are agreeing to the notice. Johnson Matthey Plc is an equal opportunities employer and positively encourages applications from suitably qualified and eligible candidates regardless of sex, race, disability, age, sexual orientation, marriage or civil partnership, pregnancy or maternity, religion or belief.
May 12, 2026
Full time
Job Title: Electrical and Multi- Skilled Technician Location: Royston, UK & Enfield, North London (site based) 1 Multi Skilled Technician (M&E)- Day shift, Monday- Friday - Salary: £45,589 plus free lunch, discretionary bonus and benefits 2 Electrical Engineer's - 24/7 shift - Salary £ 44,113.00 + 35% shift allowance + lunch allowance = £60,345.05 1 Instrument Technician - 24/7 shift - Salary £43,765.00 % shift allowance + lunch allowance = £59,875.25 World-changing careers, enabled by Johnson Matthey. With more than 200 years history, join us and help to accelerate the transition to net-zero! As an Electrical Technician, you'll contribute to JM's mission as a world leader in sustainable technology, transforming energy and reducing carbon emissions for a cleaner, brighter future. Here at JM, we are hiring Electrical, Instrument and Multi skilled Technician's to join our PGMS business. Platinum Group Metal Services (PGMS) is one of four businesses within the Efficient Natural Resources Sector that manages, distributes, refines and recycles precious metals and fabricates products using precious metals and related materials. The business unit also manufactures platinum group metals, minor metal compounds, organometallics and fine metal powders for high technology applications, as well as providing a range of management services for platinum group metals. The role: As an Electrical Technician, you will help drive our goals by: Safety should always be the highest priority for any tasks undertaken, in conjunction with our life saving policies and procedures Use of technical drawings & operator manuals alongside electrical schematic drawings & P&ID's to aid fault diagnosis process Reduce Plant downtime by proposing/implementing improvements in both the Electrical and instrumentation facets of the role Contribute to improving the site performance in all aspects of safe operation, regulatory compliance, productive output and cost efficiency by improving the engineering reliability of site equipment and ensuring appropriate maintenance frequency of assets is complied with and keep accurate written records of work carried out using SAP CMMS system Work alongside compliance & technical author to support the technical review of written maintenance documents and operational procedures Conducting Inspections, testing, calibration, adjustments and monitoring tasks as required to maintain efficient plant and build-in equipment reliability Key skills that will help you succeed in this role: An industrial Electrical and Instrumentation -based qualification to HNC/ONC level or equivalent Time served Apprenticeship with a further 5 years' experience Previous Manufacturing/Chemical industry experience Experience of structured problem-solving techniques, fault diagnosis What we offer: We make sure salaries are fair, competitive and aligned to individual roles, experience and responsibilities. We are also supportive of hybrid and flexible working and where applicable, offer life, medical and other benefits that support our employees' financial and physical wellbeing, such as: Retirement savings Share plans Saving accounts House saving funds Life and disability insurance Commuter allowances and loans Medical plans / health assessments Fitness discounts Ready to make a meaningful impact on your career and the environment? Join us and help shape a sustainable future while advancing your career! At JM, inclusivity is central to our values. We create an environment where everyone can thrive, embracing diverse perspectives to tackle challenges and ensure all colleagues feel valued and connected. For any queries or accessibility requirements, please contact (url removed). We will work with you to make suitable adjustments at any stage of the recruitment process. All conversations are confidential, and your feedback is welcome to help us provide an accessible and positive recruitment experience. Closing date for applications: This job advertisement will be posted for a minimum of 2 weeks, early application is advised. To submit your application, please click the "Apply" button online. All applications are carefully considered and your details will be stored on our secure Application Management System. This is used throughout Johnson Matthey for the selection of suitable candidates for our vacancies as they arise.Johnson Matthey respects your privacy and is committed to protecting your personal information. For more information about how your personal data is used please view our privacy notice: Johnson Matthey Privacy Notice . By applying for this role and creating an account you are agreeing to the notice. Johnson Matthey Plc is an equal opportunities employer and positively encourages applications from suitably qualified and eligible candidates regardless of sex, race, disability, age, sexual orientation, marriage or civil partnership, pregnancy or maternity, religion or belief.
A leading facilities services provider in the North West is seeking a Mobile Building Fabric Technician to perform maintenance and repairs across various client sites. The role involves installing and maintaining fabric systems while ensuring compliance with health and safety standards. Candidates should have relevant industry qualifications and experience in plumbing, carpentry, or electrical work. This position offers a company van, flexible working hours, and various employee benefits including holidays and wellbeing support.
May 11, 2026
Full time
A leading facilities services provider in the North West is seeking a Mobile Building Fabric Technician to perform maintenance and repairs across various client sites. The role involves installing and maintaining fabric systems while ensuring compliance with health and safety standards. Candidates should have relevant industry qualifications and experience in plumbing, carpentry, or electrical work. This position offers a company van, flexible working hours, and various employee benefits including holidays and wellbeing support.
Job Title: Sheet Metal Worker / Fabricator Location: Banham, Norfolk Salary: Starting from £19.00 per hour, negotiable depending on experience Job Type: Permanent, Full Time Hours: 40hr week (Monday to Friday) + time and a half overtime About us: Based in the heart of Banham, Norfolk, Full Circle Enterprises Ltd is a trusted name in vehicle care and accident repair. Founded in 2000 we have spent over 25 years building a reputation for quality, precision, and a personal touch that sets us apart. We're currently looking for an experienced Sheet Metal Worker / Fabricator to join our close-knit team in Banham, Norfolk About the role: Because of the bespoke nature of our business we're looking for someone who has a flexible approach to tasks but ideally you'll have experience of the following: Mig & Tig Welding in both Steel & Aluminium Using various machinery such as Brake press & Guillotine Fabricate from pattern/bespoke vehicle parts/panels Corrosion repairs to framework in situ Our team is very collaborative in the way they work so candidates must be able to work as part of a team in a busy workshop environment & use their own initiative. You will need to have access to your own vehicle as there's currently no public transport access to the site. What we offer: Excellent working environment Ongoing training provided We are a proud equal opportunities employer Please click on the APPLY button to send your CV and Cover Letter for this role. Candidates with experience of; Welder Fabricator, Coachbuilder, Panel Beater, MIG & TIG Welder, Aluminium Welding, Classic Car Restoration, Motorsport Fabricator, Body Shop Technician, Press Brake Operator, Bespoke Fabrication, Thin Gauge Welding, Panel Fabrication, Pattern Development, Custom Bodywork, and Structural Repair Technician also be considered for this role.
May 11, 2026
Full time
Job Title: Sheet Metal Worker / Fabricator Location: Banham, Norfolk Salary: Starting from £19.00 per hour, negotiable depending on experience Job Type: Permanent, Full Time Hours: 40hr week (Monday to Friday) + time and a half overtime About us: Based in the heart of Banham, Norfolk, Full Circle Enterprises Ltd is a trusted name in vehicle care and accident repair. Founded in 2000 we have spent over 25 years building a reputation for quality, precision, and a personal touch that sets us apart. We're currently looking for an experienced Sheet Metal Worker / Fabricator to join our close-knit team in Banham, Norfolk About the role: Because of the bespoke nature of our business we're looking for someone who has a flexible approach to tasks but ideally you'll have experience of the following: Mig & Tig Welding in both Steel & Aluminium Using various machinery such as Brake press & Guillotine Fabricate from pattern/bespoke vehicle parts/panels Corrosion repairs to framework in situ Our team is very collaborative in the way they work so candidates must be able to work as part of a team in a busy workshop environment & use their own initiative. You will need to have access to your own vehicle as there's currently no public transport access to the site. What we offer: Excellent working environment Ongoing training provided We are a proud equal opportunities employer Please click on the APPLY button to send your CV and Cover Letter for this role. Candidates with experience of; Welder Fabricator, Coachbuilder, Panel Beater, MIG & TIG Welder, Aluminium Welding, Classic Car Restoration, Motorsport Fabricator, Body Shop Technician, Press Brake Operator, Bespoke Fabrication, Thin Gauge Welding, Panel Fabrication, Pattern Development, Custom Bodywork, and Structural Repair Technician also be considered for this role.
Maintenance Technician (University of Reading) £28,000-£32,000 + Overtime + £2,700 Call-Out Rota + £600 Skill Uplifts 36-Hour Week + 39 Days Holiday + Monday-Friday Reading Looking for a stable, days-based Maintenance Technician role with a 36-hour week, 39 days holiday and Overtime available to significantly boost earnings? This Maintenance Technician position is based across a large and beautiful university estate, carrying out planned and reactive maintenance within a structured and professional environment, with consistent workload and long-term job security. The Role General building fabric maintenance across campus buildings Plumbing repairs to sanitary ware and associated pipework Carpentry tasks including doors, ironmongery, shelving and fittings Minor roofing, guttering and external fabric repairs The Person NVQ Level 3 / City & Guilds or time-served equivalent Strong building maintenance background Able to work independently and manage workload Professional, customer-focused approach Full UK driving licence Hours, Overtime & Call-Out 36 hours per week, Monday-Friday Paid overtime available Call-out rota approx. 1 in 4-5 weekends £2,700 annual call-out rota payment Standby: £38.20 weekday / £70.20 weekend or bank holiday Attendance: approx. £15 per hour (minimum 2 hours per call-out) Call-outs are generally infrequent and short Salary Enhancements £600 per year skill uplifts available for additional skills: Lead roofing / flashing Sarnafil roofing systems Plaster patching / making good Why This Role / Package 36-hour working week (shorter than standard) 39 days holiday (including bank holidays) £2,700 annual call-out rota payment Permanent, in-house position Stable Monday-Friday working pattern Paid overtime and structured standby payments Skill-based salary increases available Long-term job security within a large estate
May 11, 2026
Full time
Maintenance Technician (University of Reading) £28,000-£32,000 + Overtime + £2,700 Call-Out Rota + £600 Skill Uplifts 36-Hour Week + 39 Days Holiday + Monday-Friday Reading Looking for a stable, days-based Maintenance Technician role with a 36-hour week, 39 days holiday and Overtime available to significantly boost earnings? This Maintenance Technician position is based across a large and beautiful university estate, carrying out planned and reactive maintenance within a structured and professional environment, with consistent workload and long-term job security. The Role General building fabric maintenance across campus buildings Plumbing repairs to sanitary ware and associated pipework Carpentry tasks including doors, ironmongery, shelving and fittings Minor roofing, guttering and external fabric repairs The Person NVQ Level 3 / City & Guilds or time-served equivalent Strong building maintenance background Able to work independently and manage workload Professional, customer-focused approach Full UK driving licence Hours, Overtime & Call-Out 36 hours per week, Monday-Friday Paid overtime available Call-out rota approx. 1 in 4-5 weekends £2,700 annual call-out rota payment Standby: £38.20 weekday / £70.20 weekend or bank holiday Attendance: approx. £15 per hour (minimum 2 hours per call-out) Call-outs are generally infrequent and short Salary Enhancements £600 per year skill uplifts available for additional skills: Lead roofing / flashing Sarnafil roofing systems Plaster patching / making good Why This Role / Package 36-hour working week (shorter than standard) 39 days holiday (including bank holidays) £2,700 annual call-out rota payment Permanent, in-house position Stable Monday-Friday working pattern Paid overtime and structured standby payments Skill-based salary increases available Long-term job security within a large estate
Vehicle & Plant Mechanic Location: Nuneaton Contract: Temporary Rate: 21.39 per hour (Umbrella) Overview Experienced Vehicle & Plant Mechanic required to support a busy local authority workshop. Role focuses on maintenance and repair of light vehicles (primarily Ford Transit and Isuzu D-Max), with some exposure to refuse vehicles, road sweepers and plant equipment. Suitable for a highly experienced technician able to work independently, or a semi-retired mechanic seeking flexible workshop-based work. Key Duties Service, repair and maintain light vehicles, plant and equipment Carry out preventative maintenance inspections MOT testing (Class 4 & 7) or working towards qualification Diagnostics, fault finding and breakdown support Welding, fabrication and tyre repairs (desirable) Support air conditioning servicing (desirable) Maintain accurate workshop records and compliance documentation Requirements Strong background in vehicle maintenance (light vehicles essential) Ability to work independently in a workshop environment MOT Tester (or working towards) Good understanding of health & safety Flexible approach to emergency and reactive work We can only consider applications from those eligible to work in the UK for this position. This position will require some additional checks, to ensure you can access the site worked as needed. For more information on this position, please contact Marika Powell at ARM on (phone number removed) or email your CV and covering letter to . Disclaimer: This vacancy is being advertised by either Advanced Resource Managers Limited, Advanced Resource Managers IT Limited or Advanced Resource Managers Engineering Limited ("ARM"). ARM is a specialist talent acquisition and management consultancy. We provide technical contingency recruitment and a portfolio of more complex resource solutions. Our specialist recruitment divisions cover the entire technical arena, including some of the most economically and strategically important industries in the UK and the world today. We will never send your CV without your permission. Where the role is marked as Outside IR35 in the advertisement this is subject to receipt of a final Status Determination Statement from the end Client and may be subject to change.
May 11, 2026
Contractor
Vehicle & Plant Mechanic Location: Nuneaton Contract: Temporary Rate: 21.39 per hour (Umbrella) Overview Experienced Vehicle & Plant Mechanic required to support a busy local authority workshop. Role focuses on maintenance and repair of light vehicles (primarily Ford Transit and Isuzu D-Max), with some exposure to refuse vehicles, road sweepers and plant equipment. Suitable for a highly experienced technician able to work independently, or a semi-retired mechanic seeking flexible workshop-based work. Key Duties Service, repair and maintain light vehicles, plant and equipment Carry out preventative maintenance inspections MOT testing (Class 4 & 7) or working towards qualification Diagnostics, fault finding and breakdown support Welding, fabrication and tyre repairs (desirable) Support air conditioning servicing (desirable) Maintain accurate workshop records and compliance documentation Requirements Strong background in vehicle maintenance (light vehicles essential) Ability to work independently in a workshop environment MOT Tester (or working towards) Good understanding of health & safety Flexible approach to emergency and reactive work We can only consider applications from those eligible to work in the UK for this position. This position will require some additional checks, to ensure you can access the site worked as needed. For more information on this position, please contact Marika Powell at ARM on (phone number removed) or email your CV and covering letter to . Disclaimer: This vacancy is being advertised by either Advanced Resource Managers Limited, Advanced Resource Managers IT Limited or Advanced Resource Managers Engineering Limited ("ARM"). ARM is a specialist talent acquisition and management consultancy. We provide technical contingency recruitment and a portfolio of more complex resource solutions. Our specialist recruitment divisions cover the entire technical arena, including some of the most economically and strategically important industries in the UK and the world today. We will never send your CV without your permission. Where the role is marked as Outside IR35 in the advertisement this is subject to receipt of a final Status Determination Statement from the end Client and may be subject to change.
A leading environmental services company is seeking an Electrical Assembly Technician in Peterborough with a salary of £40,000 - £45,000 for a 12-month FTC. The role involves fabricating and documenting electrical systems, troubleshooting issues, and working with PLCs. The ideal candidate will have the City and Guilds Level 3 qualification and experience in industrial electrical works. Benefits include private healthcare, generous annual leave, and a comprehensive pension scheme.
May 11, 2026
Full time
A leading environmental services company is seeking an Electrical Assembly Technician in Peterborough with a salary of £40,000 - £45,000 for a 12-month FTC. The role involves fabricating and documenting electrical systems, troubleshooting issues, and working with PLCs. The ideal candidate will have the City and Guilds Level 3 qualification and experience in industrial electrical works. Benefits include private healthcare, generous annual leave, and a comprehensive pension scheme.
Workshop Vehicle Engineer (HGV Technician) Day Shifts Salary up to £54,000 + Overtime Our client is a well-established business with a long-standing reputation for delivering first-class fleet solutions. Their commitment to high workshop standards plays a key role in ensuring exceptional service and customer satisfaction. The Role You ll be responsible for inspecting, maintaining, and repairing a varied and diverse fleet. This is a hands-on role offering exposure to a wide range of vehicles, including: Heavy Goods Vehicles (HGVs) Refuse Collection Vehicles (RCVs) Road sweepers Hook loaders Light commercial vehicles (vans) Trailers and tippers Key Responsibilities Duties include, but are not limited to: Routine and preventative maintenance MOT preparation Servicing to DVSA standards 6- or 8-weekly safety inspections Diagnosing and rectifying faults Chassis and fabrication work Working with hydraulics and pneumatics Electrical diagnostics, wiring, and repairs Continuous improvement of vehicle standards About You We welcome applications from both qualified and time-served technicians, as well as those looking to further develop their skills. You will ideally have: A recognised qualification (City & Guilds, NVQ, or equivalent) A strong understanding of commercial vehicle mechanics A proactive attitude and commitment to high-quality workmanship Desirable (but not essential): IRTEC accreditation EV/Hybrid vehicle qualifications HGV Class 1 or Class 2 licence What s on Offer Competitive salary up to £54,000 plus overtime Ongoing training and development opportunities Support with gaining further accreditations A positive, supportive, and forward-thinking working environment This is an excellent opportunity to join a company that genuinely invests in its people. Skills can be developed but a strong work ethic and the drive to deliver outstanding service are essential.
May 11, 2026
Full time
Workshop Vehicle Engineer (HGV Technician) Day Shifts Salary up to £54,000 + Overtime Our client is a well-established business with a long-standing reputation for delivering first-class fleet solutions. Their commitment to high workshop standards plays a key role in ensuring exceptional service and customer satisfaction. The Role You ll be responsible for inspecting, maintaining, and repairing a varied and diverse fleet. This is a hands-on role offering exposure to a wide range of vehicles, including: Heavy Goods Vehicles (HGVs) Refuse Collection Vehicles (RCVs) Road sweepers Hook loaders Light commercial vehicles (vans) Trailers and tippers Key Responsibilities Duties include, but are not limited to: Routine and preventative maintenance MOT preparation Servicing to DVSA standards 6- or 8-weekly safety inspections Diagnosing and rectifying faults Chassis and fabrication work Working with hydraulics and pneumatics Electrical diagnostics, wiring, and repairs Continuous improvement of vehicle standards About You We welcome applications from both qualified and time-served technicians, as well as those looking to further develop their skills. You will ideally have: A recognised qualification (City & Guilds, NVQ, or equivalent) A strong understanding of commercial vehicle mechanics A proactive attitude and commitment to high-quality workmanship Desirable (but not essential): IRTEC accreditation EV/Hybrid vehicle qualifications HGV Class 1 or Class 2 licence What s on Offer Competitive salary up to £54,000 plus overtime Ongoing training and development opportunities Support with gaining further accreditations A positive, supportive, and forward-thinking working environment This is an excellent opportunity to join a company that genuinely invests in its people. Skills can be developed but a strong work ethic and the drive to deliver outstanding service are essential.
TIG Welder / TIG Fabricator Location : Hailsham, BN27 4EL Salary : Competitive, DOE + Excellent Benefits! Contract : Full time, Permanent Benefits : A competitive salary, private medical insurance, 25 days holiday, salary sacrifice company pension, life insurance, a state-of-the-art working environment! Take Your Career to the Next Level with VACGEN! For over 60 years, VACGEN has been driving innovation in ultra-high vacuum (UHV) technology, supporting cutting-edge research across the globe. From NASA and the European Space Agency to CERN, our high-precision products are trusted by world-leading institutions and researchers to deliver results. We are now recruiting for a TIG Welder to assume responsibility for fabricating and welding ultra-high vacuum chambers and components, pushing the boundaries of precision engineering. You will work closely with our Lead Technician, ensuring projects meet exacting standards and are completed within deadlines. Additionally, as our TIG Welder / TIG Fabricator you will: Fabricate and TIG weld vacuum chambers, components and sub-assemblies. Collaborate with the Lead Technician to align work schedules and project timelines. Conduct quality control evaluations to ensure all products meet our high standards. Set up and perform leak testing using helium mass spectrometers to verify the integrity of chamber vessels. In order to be successful in this role it s essential that you have: At least 3 years of TIG welding and fabrication experience. Proven skills in metal fabrication, including the use of precision measuring tools. Ability to read and interpret technical drawings. Confidence in meeting deadlines and working in a fast-paced environment. Basic knowledge of turning (advantageous). Strong commitment to maintaining and enhancing health and safety standards. No agencies please. Vacgen Limited is committed to fostering an inclusive and diverse workplace. We are proud to be an equal opportunity employer and do not discriminate based on race, ethnicity, religion, gender, gender identity, sexual orientation, disability, age, or any other protected status under the Equality Act 2010. Please Note : We cannot accept applications from Overseas or people who do not have the right to work in the UK. Working Conditions This role involves travel to client sites. While most work will be carried out from your usual base, you may be required to attend client meetings, site visits, or events as part of your duties. Travel will be planned in advance wherever possible, and all reasonable expenses will be covered. Click on APPLY today!
May 11, 2026
Full time
TIG Welder / TIG Fabricator Location : Hailsham, BN27 4EL Salary : Competitive, DOE + Excellent Benefits! Contract : Full time, Permanent Benefits : A competitive salary, private medical insurance, 25 days holiday, salary sacrifice company pension, life insurance, a state-of-the-art working environment! Take Your Career to the Next Level with VACGEN! For over 60 years, VACGEN has been driving innovation in ultra-high vacuum (UHV) technology, supporting cutting-edge research across the globe. From NASA and the European Space Agency to CERN, our high-precision products are trusted by world-leading institutions and researchers to deliver results. We are now recruiting for a TIG Welder to assume responsibility for fabricating and welding ultra-high vacuum chambers and components, pushing the boundaries of precision engineering. You will work closely with our Lead Technician, ensuring projects meet exacting standards and are completed within deadlines. Additionally, as our TIG Welder / TIG Fabricator you will: Fabricate and TIG weld vacuum chambers, components and sub-assemblies. Collaborate with the Lead Technician to align work schedules and project timelines. Conduct quality control evaluations to ensure all products meet our high standards. Set up and perform leak testing using helium mass spectrometers to verify the integrity of chamber vessels. In order to be successful in this role it s essential that you have: At least 3 years of TIG welding and fabrication experience. Proven skills in metal fabrication, including the use of precision measuring tools. Ability to read and interpret technical drawings. Confidence in meeting deadlines and working in a fast-paced environment. Basic knowledge of turning (advantageous). Strong commitment to maintaining and enhancing health and safety standards. No agencies please. Vacgen Limited is committed to fostering an inclusive and diverse workplace. We are proud to be an equal opportunity employer and do not discriminate based on race, ethnicity, religion, gender, gender identity, sexual orientation, disability, age, or any other protected status under the Equality Act 2010. Please Note : We cannot accept applications from Overseas or people who do not have the right to work in the UK. Working Conditions This role involves travel to client sites. While most work will be carried out from your usual base, you may be required to attend client meetings, site visits, or events as part of your duties. Travel will be planned in advance wherever possible, and all reasonable expenses will be covered. Click on APPLY today!
