152 jobs found

I'm partnering with a long-established UK engineering company in the power systems sector to appoint a Technical Director specialising in high-voltage (HV) and extra-high-voltage (EHV) substation testing and commissioning . This is a senior leadership position acting as the technical authority across grid infrastructure projects , combining strategic oversight with deep, hands-on expertise. You'll play a pivotal role in shaping engineering standards, leading commissioning activities, and ensuring the successful delivery of complex AIS and GIS substation projects across transmission and distribution (T&D) networks. Key responsibilities: Technical Governance & Strategy Define and implement engineering strategies, protection philosophies , and commissioning procedures Ensure alignment with international standards and UK utility requirements (e.g. National Grid, SSE, Scottish Power) Act as the ultimate technical authority across HV/EHV projects Project Oversight Provide leadership from FEED (Front End Engineering Design) through detailed design, construction, and final commissioning Oversee technical delivery across the full project lifecycle within transmission and distribution networks Site & Commissioning Support Lead and support complex testing and commissioning activities on HV/EHV substations Resolve critical site issues, technical queries, and design deviations Provide expert input on AIS (Air Insulated Switchgear) and GIS (Gas Insulated Switchgear) systems Quality & Safety Assurance Ensure all Factory Acceptance Tests (FAT) and Site Acceptance Tests (SAT) meet stringent quality, safety, and environmental standards Champion a "safety in design" and commissioning culture across all projects Leadership & Mentorship Mentor and develop engineering teams, including commissioning engineers and design staff Act as a subject matter expert in client and stakeholder engagements Drive continuous improvement in technical delivery and engineering excellence Requirements: Bachelor's degree in Electrical Engineering (or equivalent experience) Extensive experience in HV/EHV substation design, testing, and commissioning within T&D environments Deep knowledge of: Protection & Control (P&C) systems Primary plant (transformers, switchgear, CTs/VTs) Secondary systems and substation automation Strong experience with AIS and GIS substations Proven ability to develop test procedures , analyse protection relay settings , and lead commissioning teams on major infrastructure projects Demonstrated leadership experience in senior or principal engineering roles Desirable: Chartered Engineer (CEng) status or equivalent Experience working with National Grid, SSE, Scottish Power , or similar utilities Familiarity with IEC standards and modern substation automation protocols (e.g. IEC 61850) Track record of leading large-scale or multi-site commissioning programmes What's on offer: Executive-level technical leadership role within a specialist engineering business Opportunity to shape and influence delivery of critical UK energy infrastructure High-impact role combining strategy, leadership, and hands-on engineering Flexible working with site exposure across major grid projects Competitive salary and benefits package The salary is 80,000 to 100,000 (flex on this) plus car allowance and an annual bonus.

Technical Manager - BMS Systems London (Covering southern region) Perm Competitive salary + Car/Car/Travel Allowance + Flexible Benefits Summary We have an exciting new opportunity for a Technical Manager, with in depth experience of building management systems, to join our team. This role will ideally be based in London office, but will cover the southern region so travel will be required. In this role you will lead, own and manage the technical risk and opportunities within the business, from inception through to project completion, and client handover, focussing on design optimisation, opportunity identification, and mitigation of technical risk. You will ensure technical compliance with works information, scope, project specification and legislation, undertaking technical management of both internal and external designs. This is a permanent staff position with NG Bailey. Some of the key deliverables in this role will include: Demonstrate appropriate health and safety leadership to ensure the safety first and foremost message is visible and alive throughout all activities. Lead the technical engineering management on internally and externally designed projects to successful completion, ensuring best value design, management of opportunities and risk mitigation. Provide technical advice and assistance to other areas of the business, and support business development from a technical perspective. Assist the Regional Design & Engineering Manager in the production of technical management fees for projects. Ensure the accuracy and integrity of technical management costs, values, and programme forecasts, seeking opportunities to suggest actions which mitigate risk and maximise profitability. Support the Principal Technical manager in the identification, delivery and attendance of CPDs, ensuring that the development of design/technical team's competence is maintained. Provide technical advice and assistance to other areas for the business Prepare monthly project reports for senior stakeholders, highlighting progress, risks, opportunities, and resource issues. Advise on commercial progress against plan, any variances from plan, and the corrective actions being taken. On external designs, take ownership of the completion of the responsibilities matrix, ensuring scope gaps are mitigated. Build and maintain mutually beneficial customer, key supplier and internal relationships. Promote the design team and actively seek out new opportunities Communicate proactively with project stakeholders to improve our collaboration with operational teams. Conduct regular independent design/technical reviews, ensuring designs are technically correct and represent best value, and comply with all legal and contractual requirements. Apply current legislation regarding building regulations, standards, CDM, quality control, commissioning, safety & environmental issues. What we're looking for : Extensive experience of building management systems Operational experience on project installation Good understanding of design and build, and traditional construction contracts Significant experience of commercial management on design projects Strong communication skills Qualifications or professional memberships (desirable) I.Eng, MCIBSE, MIET, B.Eng (Hons) or equivalent Benefits: We're always evolving our benefits to ensure we're attracting and retaining great people. Some of what you can expect includes: Car/Car allowance Salary sacrifice car scheme (Hybrid/Electric Vehicle) Pension with a leading provider and up to 8% employer contribution Personal Wellbeing and Volunteer Days Private Medical Insurance Free 24/7 365 Employee Assistance Program to support mental health and well-being (including counselling sessions and legal advice) Flexible benefits to suit from Dental Insurance, Gym Memberships, Give As You Earn, Travel Insurance, Tax Free Bikes. Personal development programme Next Steps: As a business, we're on a journey to build on our culture where everyone is included, treated fairly and with respect. This starts with recruitment and how we bring people into the organisation. We'll do our best to outline the recruitment process to you ahead of time with plenty of notice. If you require any accommodations to participate in the application or interview process, please let us know and we will work with you to ensure your needs are met. About Us: We are one of the leading independent engineering and services businesses in the UK. Founded in 1921, with a turnover of £500m and 3000 employees, we are proud of our history of developing great people through our investment in training. Working across a variety of sectors within the building and infrastructure industry, our innovative, responsible and forward-thinking approach allows us to work on fantastic ground-breaking projects, providing solutions using the latest tools and technologies. Progression is something we value, and we will make sure that when you join us you have a clearly defined development path, supported by regular reviews, training and ongoing support to enable you to be the best you can be.

Principal Technical Safety Engineer with knowledge and experience of Software Development Warrington and Other Locations Risktec is looking for a Principal Technical Safety Engineer who not only has strong technical safety expertise, but also a genuine interest in and aptitude for software development. Specifically, we are seeking someone who can maintain and further develop our internal software tools that support our consultancy services. Background Risktec Solutions is an established, independent and specialist risk management consulting and training company, and is part of the TÜV Rheinland Group. We help clients to manage health, safety, security, environmental and business risk in sectors where the impact of loss is significant. Our people are high calibre professionals, with a strong focus on meeting clients expectations and we have offices across the UK and in the Netherlands, Dubai, Muscat, Houston and Calgary. Role Description The successful candidate will be part of an energetic, expanding team, and will be expected to work effectively and collaboratively with colleagues on multiple projects in a supportive, progressive environment. This permanent position would be based preferably at our Warrington office, but our other office locations will also be considered. The role may involve some occasional travel within the UK and world-wide locations to meet project requirements. This varied and challenging role will help drive forward Risktec s risk management consulting services, with your focus in two key areas: Technical safety project work and consultancy for external clients; and Maintenance and development of internal software packages supporting consultancy services. Consulting Key Skills and Experience Applicants should have a relevant Science, Mathematics or Engineering Degree , and possess strong analytical thinking, numerical, written and verbal communication skills. The candidate must have a minimum of eight years of relevant experience in some of the following areas: QRA and other technical safety studies (BRA, EERA, ESSA, FERA, Facility Siting Studies, etc.) Consequence and physical effects modelling Computational Fluid Dynamics (CFD) Fire and Gas Mapping Reliability, Availability and Maintainability (RAM) studies Experience in the use of software packages such as SAFETI, PHAST, FRED, SHEPHERD, FLACS, FDS, Reliability/ Availability Workbench Software Development Key Skills and Experience Due to the varied nature of the role, candidates must have a broad experience base, with the ability to select the optimum technology for a particular problem. To this end, the candidate must have some experience in several of the following areas: Full stack development Python (and associated data analysis libraries such as Numpy and Pandas) C#, .NET, and JavaScript/Typescript Visual Basic for Applications (VBA) Linux, including bash scripting Git You will maintain, develop and use internal software relating to our risk modelling capabilities, supporting consultancy projects across the company. This will include routine development of our existing internal tools, as well as ad-hoc support to other consultants where automated software solutions are required. Tasks may include scripting of simulation data analyses, 3D and mathematical modelling, process automation and development of bespoke risk modelling software solutions based on specific client requests. To fulfil this responsibility, applicants should be experienced in both front-end and back-end development languages, frameworks and third-party libraries. You will be the driving force behind the software maintenance/ development programme leading, managing and implementing it assisted by Directors, subject matter experts and consultants. Our Offer We have an established competence framework, with regular appraisals and a defined pathway for progression. In addition, a competitive package of salary and benefits is offered for permanent staff, including: 33 days annual leave (including public holidays) Flexible working Company-wide, inclusive profit share scheme Private medical insurance Life insurance 7.5% contribution into a pension scheme Payment of subscription fees for membership of one professional body

Shape how safety-critical software is verified at the highest level. We're partnering with a growing, highly respected engineering SME specialising in safety-critical embedded systems . They are looking for a Principal Software Engineer to play a key role in developing and assuring high-integrity embedded software, including a safety-certified real-time operating system. This is a hands-on software engineering role within the verification team, combining technical leadership with deep involvement in verification, validation, and certification activities. The Role You'll operate as a senior technical authority while remaining close to the code. Responsibilities include: Leading verification strategy and approach for embedded software systems Designing, developing, and maintaining test frameworks, tools, and automation Performing low-level software verification across multiple architectures Contributing directly to code-level activities (primarily C / embedded environments) Driving verification activities across the full software lifecycle Supporting certification to standards such as IEC 61508, DO-178C, ISO 26262 Mentoring engineers and setting best practices within the verification team Working closely with customers to provide technical guidance and support What We're Looking For Essential: Degree in Engineering, Computer Science, Maths or similar Experience with Real-Time Operating Systems (e.g. FreeRTOS, SafeRTOS or similar) Strong background in embedded software engineering (C) Significant experience in software verification / validation Experience developing test tools, frameworks, or automation Understanding of low-level / hardware-near software behaviour Experience working in a controlled or safety-critical environment Degree in Engineering, Computer Science, Maths or similar Strong communication skills and ability to engage with stakeholders Highly Desirable: Knowledge of safety standards ( IEC 61508, DO-178C, ISO 26262, IEC 62304 ) Experience with ARM architectures (Cortex M / A) or similar Understanding of debugging at processor level Knowledge of software lifecycle, requirements, and configuration management Exposure to networking, multicore systems, or embedded security Working Environment Bristol-based Hybrid working (minimum 3 days onsite; more during onboarding) Collaborative, engineering-led environment with strong technical depth Package & Benefits Competitive salary with annual review Performance-related bonus Generous pension contribution Private healthcare, income protection & life assurance 25+ days holiday (increasing with service) Flexible working hours Ongoing professional development and training

Job Title: Principal FEA Engineer Location: Barrow in Furness - On-site Role Type: Permanent Salary: 60,000 - 65,000 + benefits Our client, an established defence engineering firm, require an experienced Principal FEA Engineer to join their multi-disciplined team in Barrow in Furness. Working on cutting-edge marine systems, this role offers hands-on experience with high-performance computing (HPC) systems and advanced CFD tools. Support with relocation costs can be discussed and included in an offer package, subject to HR approval. What you'll be doing as Principal FEA Engineer: You'll lead the development of the Stealth Engineering FEA capability. You'll Perform detailed FEA simulations to assess structural behaviour and its effect on stealth-related performance. You'll analyse structure-borne vibration and fluid-borne noise characteristics across components and systems. You'll prepare clear technical reports and presenting findings to design teams and stakeholders. You will be collaborating with multi-disciplinary teams to ensure that stealth, structural, and safety requirements are fully met. You'll assist in model validation, correlation with physical tests, and refinement of analysis techniques. What experience you need to be the successful Principal FEA Engineer: A degree in Mechanical Engineering, Structural Engineering, Aerospace Engineering, or a related STEM discipline Experience with FEA software (such as ANSYS, Abaqus, COMSOL, or similar). Strong understanding of structural mechanics and finite element principles. Ability to interpret results and communicate complex findings in a clear, concise way. A methodical approach and attention to detail. Familiarity with dynamic, thermal, or coupled analyses. Candidates would need to hold British nationality and have lived & worked in the UK for 5+ years and be eligible for SC security clearance. This really is a fantastic opportunity for a Principal FEA Engineer to progress their career. If you are interested please apply as soon as possible as this position will be filled quickly so don't miss out! Services advertised by Gold Group are those of an Agency and/or an Employment Business. We will contact you within the next 14 days if you are selected for interview. For a copy of our privacy policy please visit our website.

Principal Civil Engineer Location: Fareham, Hampshire Hours: Monday to Friday, Flexible Opportunity with Core Hours Required Salary: Competitive Holiday: 32 days including bank holidays, Increasing with length of service. Sector: Civil Engineering Our client is a well-established, multi-disciplinary consultancy specialising in transport planning, travel planning, and civil and structural engineering services. The business has grown steadily in recent years and now operates across the UK, supporting both public and private sector clients on a wide range of development and infrastructure projects. They are known for delivering practical, high-quality solutions from early feasibility through to detailed design and project delivery, with a strong emphasis on collaboration and client-focused outcomes. With an experienced and technically strong team, the company provides end-to-end support, combining commercial awareness with in-depth knowledge of current legislation and industry standards. Our client places a strong emphasis on communication, long-term relationships, and continuous improvement, underpinned by their core values of customer focus, openness, results, and excellence. They have built a solid reputation for delivering reliable and innovative engineering solutions that enable successful development across a diverse portfolio of projects nationwide. Position Duties Lead and manage civil engineering projects across drainage, highways, and external works from planning through to construction Oversee and coordinate design teams, including mentoring, appraising, and developing junior staff Plan, allocate, and control resources to ensure efficient project delivery and team performance Produce and review engineering designs, reports, and drawings in line with relevant standards and regulations Collaborate with clients, local authorities, developers, architects, and sub-consultants Manage project budgets, costs, and fee proposals while maintaining commercial awareness Ensure compliance with quality management systems, best practice, and continuous improvement processes Identify and manage design risks, ensuring health, safety, and sustainability are embedded in all projects Attend client meetings and site visits, maintaining strong professional relationships and communication Support business development through client engagement, marketing input, and promotion of the company's services Position Requirements Chartered Engineer (CEng) or Incorporated Engineer (IEng) working towards CEng with the Institution of Civil Engineers A degree or HND in Civil Engineering Background in collaborating with local authorities, developers, and architects on the civil engineering aspects of various schemes Consultancy experience is essential for this position Project management experience in civil engineering, covering schemes that integrate drainage, external works, and highways elements Experience with the design of on- and off-site highway features, in accordance with relevant standards and guidance (e.g. Design Manual for Roads and Bridges, Manual for Streets) Previous experience in delivering drainage designs, highway layouts, and S278/S38 schemes Skilled in the use of AutoCAD and Site 3D, or equivalent 3D design software A thorough understanding of Sewers for Adoption, building regulations, and the SuDS Manual Experience in line management, including conducting appraisals, identifying training requirements, and supporting the performance of junior team members Position Remuneration 5-hour workdays with flexible working hours, with a core hour requirement allowing for lifestyle and work life balance 24 days annual leave, increasing with length of service plus 8 bank holidays Day off on your birthday if it falls on a working day One community or charity day a year to allow you to support the person projects you love Salary sacrifice scheme with the opportunity to purchase or sell annual leave days. Christmas shut down Quarterly and yearly bonus schemes, offering the potential to earn more Private healthcare upon completion of probation period Bike to work scheme Streamline Search is a technical recruitment agency based in Chichester, West Sussex operating across the United Kingdom. We are acting as a Recruitment Agency in relation to this vacancy, and in accordance with GDPR by applying to this post you are granting us consent to process your data and contact you in relation to this application.

Senior CDM Principal Designer An employee-owned and family-feel consultancy CDM Consultancy are growing their team and looking for a Senior CDM Principal Designer. You will work remote and hybrid, as you will be offered full auutonomy to manage your work and schedule. This CDM specialist consultancy have a great reputation and take compliance extremely seriously, which allows for a lot of repeat business being won from their clients. You will receive a profit share bonus and car allowance, on top of you basic salary. They have paid their CDM Principal Designers a bonus every year since becoming employe owned. The Senior CDM Principal Designer role As you carry out the role of Principal Designer, you will offer clients and design teams advisory service on Design Risks. Attend sites to spot potential risk, as well as gathering Pre-Construction Information (PCI), collate/review Construction Phase Plans (CPP) and manage the H&S file. The Senior CDM Principal Designer will have Minimum of 5 years within CDM Principal Design (essential) NEBOSH Construction (essential) Membership with IOSH and APS (essential) Technical qualification/degree (e.g. Architecture, Building Surveying, Engineering etc.) (preferred) In Return? Up to 60,000 Profit share bonus Car Allowance Extremely good career progression Full professional development and training support Annual Leave plus Bank Holidays and Christmas Pension scheme Support with achieving chartership Collaborative and progressive working environment Contact Bex Ellinger at Brandon James on (phone number removed) CDM / Principal Designer / Construction / NEBOSH / IOSH / Tech IOSH / Health and Safety / Building Control / CertIOSH / GradIOSH / CMIOSH / APS / IMaPS / AaPS / CMaPS / CDM Consultant / CDM Advisor / H&S / Design Safety / Architecture / MIIRSM

Principal Electrical Design Engineer - Protection & Control Scotland Region Permanent - Full Time, hybrid Salary Competitive + Car Allowance + Flexible Benefits Summary: This role involves designing and overseeing the implementation of protection schemes, control systems, and related equipment to ensure the safe and reliable operation of power networks, substations, and Transmissions and Distribution electrical infrastructure. Position requires technical expertise and vast experience working in Transmission and Distribution sector for protection & control and Substation Automation system/SCADA design (from 11kV up to 400kV). Candidate should lead the design and specification of protection and control systems for electrical substations, powerplants, and transmission/distribution networks. Roles & Responsibilities: Candidate is responsible to develop protection settings, relay PSL files, coordination studies, including fault detection and isolation strategies. Candidates should have complete knowledge of all TSO/DNO standards & specifications with respect to P&C Design & Calculations, as well as overall Substation Design Works. He/She should ensure compliance with relevant national and international standards (e.g., IEC, BS, IEEE) in protection system design. Candidate should have good knowledge of substation primary design and substation equipment/switchgear specifications. He/She should ensure that the design meets safety standards and regulatory requirements, incorporating protection against electrical hazards, arc flash, and other safety concerns. Design, implement and maintain SCADA/communication systems for a variety of clients in sectors including utilities, oil and gas, manufacturing, industrial automation and various other communication networks. Configure and optimize network infrastructure & communication protocols such as IEC 61850; Distributed Network Protocol (DNP 3); Parallel Redundancy Protocol (PRP); Precision Time Protocol (PTP); Network Time Protocol (NTP); Simplified Network Time Protocol (NTP), Modbus, OPC, Profibus, etc for seamless integration with field devices, including RTUs, PLCs, IEDs, etc, also ensure stable connectivity between SCADA centres & remote sites, and configure secure VPNs & remote access protocols to allow for safe, off-site monitoring and control. Understand client requirements & produce network architecture philosophy diagram, IED telecommunication diagram, SCADA & Telecommunications Panel design, Network IP allocation, I/O Schedules, Cable & Core schedules, etc. Assist with the setup and commissioning of SCADA systems at client sites, troubleshoot field devices and network communication issues, perform preventive and corrective maintenance on SCADA infrastructure and associated hardware. Efficiently design/develop the SCADA/communication systems (e.g., Ignition, Siemens WinCC, GE iFIX, etc) to ensure real-time data acquisition and control for critical infrastructure. Provide remote support for troubleshooting SCADA system and network issues, ensuring minimal downtime and swift resolution of critical incidents. Conduct system upgrades, testing, and validation for new features, components, and patches. Implement cybersecurity measures to safeguard SCADA systems against emerging threats. Collaborate with cross-functional teams to ensure smooth integration and deployment of SCADA systems. Candidate should have experience in tendering, pricing jobs, proposal creation. Candidate should be actively participating in work winning process. Candidate should be capable of technically assessing engineering problems and critically evaluating a range of technical solutions. Unwavering confidence in technically assessing engineering problems and critically evaluating a range of technical solutions will be instrumental in pursuit of engineering excellence. Exemplary communication skills to demonstrate diligence, prioritize tasks effectively, and ensure a thorough understanding of relevant legislation, including CDM and ESQCR. This knowledge will be pivotal in managing Transmission and Distribution network. Collaborate closely with other designers, construction professionals, and engineering teams. Liaise effectively with the Power Systems, Primary and Civil design departments to ensure that all objectives are met and that the best possible design is submitted. Review and provide constructive feedback on the reports and drawings done by Junior & Senior Engineers. Provide technical leadership and mentoring to junior engineers in the design, analysis, and commissioning of protection systems. What we're looking for : Experience: Extensive experience in electrical protection and control system design, Substation Automation and SCADA system typically 12-15 years, with a proven track record of delivering complex projects within the power sector. Technical and Professional knowledge and experience associated with the role. Candidate should have vast experience in crafting Single Line Diagrams, AC & DC Schematic Drawings, Panel General Arrangements, Panel Wiring Diagrams, Switchgear Termination/interconnection drawings, Block Cable Diagrams/Schedules, and performing cable specification/sizing calculations, battery sizing calculations, CT/VT sizing, multicore sizing, Relays CORTEC/specifications. Candidate should have experience in testing & commissioning of P&C, SCADA/Communication/SAS panels. Should be able to Identify potential risks and failures within protection and SCADA systems and propose mitigation strategies. Candidate should have good knowledge & experience working with AutoCAD. Qualifications: Education: Bachelor's degree in electrical engineering (typically 2:1 or above) in Electrical Engineering, Power Systems, or a related field. A master's degree may be preferred for senior roles.Chartered Status (Preferred): Chartered Engineer (CEng) status with a professional body such as the Institution of Engineering and Technology (IET) or the Institution of Electrical Engineers (IEE) is highly desirable.Certifications (Optional): Professional certifications such as NEBOSH for health and safety, or specific training in protection and control system design, may be beneficial.Candidate should have experience working in Substation Automation Syste

Building Regulations Principal Designer - remote/hybrid with travel across various projects - £70k-£75k+benefits - well established, national consultancy working across education, residential, retail and commercial schemes. Job responsibilities:- The Building Regulations Principal Designer (BRPD) Consultant is responsible for delivering high-quality Building Regulations compliance and design risk management services in accordance with the Building Safety Act 2022 and associated regulations. The role provides senior-level technical leadership across projects, ensuring that design work complies with all relevant functional requirements of the Building Regulations and that compliance is planned, managed, and monitored throughout the design phase. In addition to technical delivery, the role plays a key part in developing client relationships, growing the BRPD service offering, and contributing to business development activities, positioning the business as a trusted compliance advisor. The BRPD Consultant represents the organisation at key project and client meetings, supports strategic growth, and drives consistent, high-quality service delivery across all commissions. Requirements:- Degree in Architecture, Architectural Technology, Building Surveying, Engineering, or related discipline Membership of a relevant professional body (RIBA, CIAT, CIOB, CABE or equivalent) Demonstrable competence in accordance with PAS 8671 (or working towards) Strong working knowledge of the Building Safety Act 2022 and Building Regulations Essential Minimum 5+ years experience in design, technical compliance, or Building Regulations advisory roles Demonstrable experience delivering Building Regulations compliance across multiple project types Strong understanding of Approved Documents and functional requirements (Parts A S as applicable) Experience coordinating design teams and managing compliance risk through design stages Experience engaging with Building Control Bodies / Registered Building Inspectors Ability to review and interpret complex technical design information Experience acting as Building Regulations Principal Designer Experience working on higher-risk or complex buildings Knowledge of Gateway processes (where applicable) Experience developing compliance trackers / strategies Experience mentoring or leading teams Desirable Experience acting as Building Regulations Principal Designer Experience working on higher-risk or complex buildings Knowledge of Gateway processes (where applicable) Experience developing compliance trackers / strategies Experience mentoring or leading teams

We're looking for a Principal Electrical or Mechanical Engineering Team Leader to join our MEP team based in Liverpool, Manchester, or Leeds. Location: Liverpool, Manchester, or Leeds - with opportunity for agile working Hours: 40 hours per week - some flexibility on hours available if desired, just let us know when you speak to us. Salary: Starting from £70,000 per annum Sector: MEP - across a variety of industry sectors We are unable to offer certificates of sponsorship to any candidates in this role. The role involves leading the design and delivery of complex M&E building services projects within a variety of sectors. As a Chartered Engineer and Design Team Leader, you will manage MEP teams, coordinate with multi-disciplinary design teams, ensure technical excellence and compliance, and work closely with project teams and clients for a major main contractor. The position requires strong leadership, significant industry experience, and the ability to deliver safe, efficient, and innovative engineering solutions from concept through construction. Are you A Chartered Engineer and member of CIBSE or IET? A Design Team Leader with strong M&E experience? A Design Team Leader looking to take the next step for a Main Contractor with a secured workload in a variety of industry sectors? Passionate about working for a collaborative, trusted, and delivery-focused organisation? Do you Hold a Degree in Mechanical or Electrical Building Services Design Engineering or related subject? Bring experience of working across both public and private sector projects? Want to work for a highly regarded Main Contractor, recognised as a Top 30 employer on Glassdoor? What will you be responsible for? As a Principal Electrical or Mechanical Engineering Team Leader, you'll be working within the MEP Design team, supporting them in delivering high-quality, coordinated engineering solutions across public and private sector projects. Your day to day will include: Lead the design delivery of high-quality M&E designs across new build, refurbishment, and minor works projects, ensuring outputs meet programme, budget, quality, and safety standards Support the Head of Service in leading and managing the M&E design teams, working closely with project leads to deliver coordinated multi-disciplinary design solutions Manage team performance, utilisation, and development, ensuring capability aligns with workload and business targets Oversee technical delivery including feasibility studies, multi-stage designs, specifications, condition reports, and technical advice Maintain and apply engineering standards, QA procedures, document control, and Health & Safety policies Build and maintain strong client relationships across public and private sector projects, ensuring high levels of customer satisfaction Contribute to business development, including compiling fee proposals, quality submissions, bids, presentations, and winning new work Provide senior technical leadership and ensure integrated design solutions through to completion Promote continuous improvement, innovation, and best practice across the M&E service. Represent Kier within relevant industry sectors, contributing to forums, working groups, and industry engagement Drive standards, innovation, best practice, safety, wellbeing and customer satisfaction Supervise and mentor junior and less experienced members of the team with their journey to chartered status What are we looking for? This role of Principal Electrical or Mechanical Engineering Team Leader is great for you if: Chartered Engineer (CIBSE or IET) with a degree in Mechanical or Electrical Building Services Engineering design or similar subject Proven senior leadership experience managing multi-disciplinary engineering teams Strong communicator able to translate complex technical information clearly Experienced in quality management and design governance Fluent in use of industry related software and calculation methods Able to meet BPSS security requirements Rewards and benefits We're proud to be able to offer our brilliant people a wide variety of benefits that you can tailor to your needs. You can see more information of benefits here. Diversity and inclusion Making Kier a diverse and inclusive place to work is a huge priority for us. We're proud of the steps we've taken so far, but we know we must always do more. Our employees are key in shaping Kier's diversity and inclusion initiatives and our people have made a huge impact on how we work, by using their experiences to shape our policies. You can see our D&I action plan here. As a Disability Confident employer, we will ensure that a fair and proportionate number of disabled applicants that meet the minimum criteria for this role will be offered an interview. Due to the nature of this role, you will also be required to complete a Basic Disclosure and Barring Service Check (applicants with convictions will be treated on a case-by-case basis. We do not discriminate based on an applicant's conviction history or the details of any convictions disclosed to us). Some roles may also be subject to further pre-employment checks. We look forward to seeing your application to . Matched pension scheme up to 7.5%, Life Assurance, Enhanced Family Friendly Policies, Discounts on go-to brands, Free Heath and wellbeing services, Training and development schemes, Electric Vehicle Leasing, Paid volunteering leave.

Production Manager Offering £50,000 - £55,000 Basic Salary plus Great Benefits Our client is an established engineering business based in Harrogate. Now recruiting a Production Manager to join their fast moving operation. The Production Manager will be responsible for the technical management, supervision and control of the manufacturing processes, ensuring a safe, reliable and efficient work environment. Production Manager - Key Responsibilities Production management, oversee planning and prioritisation of manufacturing including scheduling, assessing resource/stock requirements and efficient completion of works orders. Lead on H&S initiatives and ensure safe working practices are followed. Implement and manage continuous improvement for performance, reliability and quality using modern manufacturing principals. Support R&D with new Product Implementation into manufacture, analysing processes and equipment effectiveness and reliability to meet demand. Minimise costs where possible and ensure the required best working practices are always maintained. Identify improvement measures and maintain standard operating procedures for the training of personnel. Including coaching, developing and supporting team leaders. Identify and implement new software, for process and or procedures to improve effectiveness and efficiency. Ensure KPI's are correctly set and appropriately managed. To monitor, control and report any manufacturing delays and deficiencies. Investigate defect issues using root cause analysis tools to identify issues and implement corrective actions. Communicate and liaise with other departmental managers regarding throughput of stock to ensure production targets are met. Including production quantity, quality, labour cost and waste. To plan and manage capital investments and resources in the department. Support the planned automation initiatives working closely with R&D. Production Manager - Candidate Experienced Production Manager with an in depth understanding of lean manufacturing principles. Strong leadership and people management skills, ideally, with experience of managing both team leader and operative levels. A safety champion, strengthening our HSQE compliance and commitment. Good communication and interpersonal skills. Strong problem-solving and decision-making abilities, able to act quickly and take ownership. The Production Manager position is offering £50,000 - £55,000 basic salary plus great benefits for the successful candidate! This is a full-time, permanent, site-based position in Harrogate. All successful candidates will be contacted within 5 days of application. Due to the volume of recent applications, if you do not receive a response within this time frame, please assume your application has been unsuccessful for the position of Production Manager. The Production Manager vacancy is being advertised by Technical Prospects Ltd. The services advertised by Technical Prospects Ltd are those of an Employment Agency.

AV Installation Engineer - 32,000/ 37,000 per annum - Hull Principal IT are supporting a leading AV and technology solutions provider delivering high-quality audio visual installations and integrated technology solutions across commercial environments throughout the UK and beyond. Due to continued growth, they are looking to recruit an experienced AV Installation Engineer to join their engineering team. Hull-based with frequent travel to customer sites across the UK and occasional overseas travel. The Role The successful candidate will play a key role in leading and delivering professional AV installation projects across a variety of commercial environments. This is a hands-on position responsible for overseeing all aspects of AV installations including cabling, equipment installation, rack building, system configuration, testing, commissioning, and client handover. The role will also involve mentoring junior engineers, maintaining installation quality standards, and acting as a key point of contact on-site. Key Responsibilities: Lead and carry out 1st and 2nd fix AV installations Install, terminate, and test structured cabling systems Mount and configure AV equipment including displays, audio systems, conferencing systems, and control equipment Perform system testing, fault finding, commissioning, and final handovers Read and interpret technical drawings and schematics Work closely with project managers and technical teams to ensure successful project delivery Supervise and mentor junior engineers and apprentices on-site Ensure all works are completed in line with company quality standards and health & safety requirements Maintain accurate installation documentation and records Act as a professional and customer-focused representative on client sites Support remedial works, servicing, and maintenance activities where required Requirements: Extensive experience within commercial AV installations Strong understanding of AV systems, signal flow, and integration Experience with structured cabling, containment, rack building, and commissioning Excellent troubleshooting and problem-solving skills Strong client-facing and communication skills Site Supervisors Safety Training Scheme - SSSTS certification Full UK driving licence Desirable Skills & Certifications: CTS or CTS-I certification Experience leading installation teams on large-scale AV projects Networking knowledge and AV-over-IP experience Formal electrical, electronic, or network engineering qualifications The Package: If successful our client is offering a salary of 32,000 - 37,000 per annum, favourable holiday allowance, ongoing development and training plus many more. How to Apply : If you are interested in hearing more about this AV installation engineer vacancy or interested in applying for the role please email me at or contact Principal IT Directly on LinkedIn. INDGH

Building Regulations Principal Designer (BRPD) - Technical Lead Shape safer buildings. Influence better outcomes. Be the trusted regulatory authority. We're looking for a Building Regulations Principal Designer (BRPD) Technical Lead to play a pivotal role in ensuring buildings are designed and delivered in full compliance with the UK Building Regulations and the evolving building safety regime. This is a highly influential, project facing role where your technical authority, regulatory insight and leadership will directly shape how complex projects are designed, coordinated and assured - from the earliest design stages through to delivery. If you're a Building Control professional ready to apply your expertise at scale, this role will feel like a natural next step. What you'll be doing As the Designated Individual (DI) under the Building Regulations, you will: Lead and oversee compliance with Part 2A of the Building Regulations Put robust arrangements in place to ensure designs meet regulatory and building safety requirements Act as the technical authority for building regulations and higher risk building work Coordinate designers, dutyholders and stakeholders to promote collaboration and competence Identify, manage and reduce building safety risks throughout the design lifecycle Support the development and implementation of a strong Building Safety Management System Translate regulatory change into practical guidance for project teams Contribute to training, upskilling and shared learning across the business Build trusted relationships with regulators and industry stakeholders You'll work across a diverse portfolio of projects, with the opportunity to influence standards, behaviours and outcomes on a wide scale. Who this role is ideal for This role is particularly well suited to experienced Building Control professionals - including those from local authority or approved inspector backgrounds - who want to: Apply their regulatory knowledge in a strategic, design led role Influence compliance upstream rather than only at inspection stage Operate as a senior technical leader within complex, multi disciplinary environments Work closely with designers, engineers and delivery teams to embed compliance by design You may also come from an architectural, engineering or design compliance background, provided you bring strong regulatory expertise and leadership capability. What you'll bring Around 10 years' experience in design, construction or regulatory compliance Deep understanding of the UK Building Regulations and building safety requirements Proven ability to guide and influence multi disciplinary teams Confidence working with higher risk buildings and complex regulatory frameworks Strong communication, organisation and stakeholder management skills A practical, solutions focused mindset with high technical credibility Qualifications Degree in Architecture, Civil Engineering, Structural Engineering or similar Chartered (or working towards) membership such as RIBA, CABE, RICS or equivalent Why join us You'll be part of an organisation that takes technical excellence and building safety seriously - investing in people, systems and innovation to deliver better outcomes for the built environment. In return, you'll gain: A genuinely influential role with real autonomy Exposure to complex, high profile projects A platform to shape best practice in building safety and regulation Long term career development within a values driven, technically led organisation Inclusive Hiring As part of the Disability Confident scheme, we would like to enable access to candidates with long term conditions and disabilities through the 'Offer an interview scheme'. This supports applicants that meet the essential criteria by offering an interview for the advertised position. Please let us know if you would like to opt in to this scheme and let us know if you require any adjustments for the interview process.

A leading construction firm in Dartford is seeking an experienced Building Regulations Principal Designer Technical Lead to ensure compliance with UK Building Regulations. The role involves overseeing and leading compliance efforts, acting as a technical authority, and influencing design workflows across a diverse portfolio of projects. Ideal for Building Control professionals eager to apply strategic insights in a collaborative, multi-disciplinary environment. The company offers significant career development opportunities within a values-led framework.

Overview Morgan Advanced Materials is a business rich in history and innovation. Founded in the UK in 1856, we have grown into a global organisation with 70 sites in 18 countries. Our model to serve our customers where they need us has led to a diversified product range using our unparalleled expertise in ceramic and carbon materials, which we exploit to solve difficult problems for our customers across a diverse range of markets. We are a purpose driven organisation. Our purpose is to use advanced materials to make the world more sustainable and to improve the quality of life. We deliver on that purpose through the products that we make, and the way that we make them. The Technical Ceramics business of Morgan Advanced Materials engineers high performance functional and structural ceramic materials, components and sub-assemblies to address customer-specific technical challenges. Key Figures:Revenue £1,100.7m (2024), 8,000 employees, manufacturing in 20+ countries, and a global customer portfolio. A UK PLC with head office located in Windsor, Berkshire UK. Listed on London Stock Exchange; Member of the FTSE 250 Index. Responsibilities Morgan Advanced Materials is a world leader in advanced materials development and production. We produce a wide range of specialist, high specification materials that have extraordinary attributes and properties. Despite the complexity of our technologies, our focus is simple - we supply innovative, differentiated products made from advanced materials which enable our customers' products to perform more efficiently, more reliably and for longer. Material science is pivotal to our Company's success as it is a key constituent to developing our distinctive competencies that differentiate our business from the competition. The Structural Ceramics Global Centre of Excellence serves our global customers by developing new, differentiated materials technologies for structural ceramics applications. The Centre of Excellence leads in innovating new formulations and processes, serves as a hub for academic collaboration on structural ceramics with key university faculties worldwide and acts as a focal point for R&D with raw material suppliers. It allows Morgan to focus on both idea generation and execution in one integrated facility, with the ultimate aim of maximising the performance of our customers' applications and processes. This Senior Materials Scientist role extends that of the Materials Scientist in taking individual lead on strategic projects for the business, providing a source of technology expertise within the CoE and across the wider business and in leading, guiding and mentoring Materials Scientists within the group. The individual will have demonstrable technical skill and an ability to apply their core skills across a wide range of technical challenges, being able to swiftly learn new technical areas and working beyond past discrete experiences. Principal Objectives Lead strategic development programmes to enhance material, processor product performance Lead the definition, planning and execution of the technology development programmes to achieve success. Act as a source of Materials Science and technology expertise across the CoE and the wider Morgan Global Business Units Represent the CoE at a GBU level in technology relevant activities and on a wider basis represent Morgan in external interactions Supervise, guide and mentor Materials Scientists Design, organise and carry out material analysis, development, production and processing trials at laboratory, pilot and production scales. Interact with global raw materials or equipment suppliers and research facilities to coordinate support for the R&D program, and to organise external testing programs to benchmark and develop capabilities. Define, plan, direct and supervise the day to day activities of technicians supporting projects Assess, analyse and interpret development results, adapting and iterating project activities to achieve the desired outcomes within an optimised timescale. Ensure high standards of operational management including measurement control and data recording. Where necessary to develop new or improved development or testing methods. Apply existing knowledge of materials and processes to maximise benefits to the business through increased sales revenue and lower operating costs. Develop quicker and more efficient routes and processes for materials development Identify, quantify and communicate improvement opportunities relating to materials science and manufacture. Support recruitment of technical employees and build links with technology contacts both within and external to the Morgan portfolio. Peer review the work of others to maintain technical standards Support and enhance the company's commitment to the highest standards of Health and Safety and ensure all policies are adhered to during daily working. Investigate and resolve technical issues that may arise in the manufacturing process or products. Qualifications Educated to PhD level or equivalent experience in Materials Science or a closely related scientific field. Candidates with proven R&D experience and expertise in ceramic manufacturing would be particularly attractive. Experience leading project delivery to meet stakeholder requirements, leading projects of scale; directing, supervising and mentoring technologists and technician staff, collaborating across multiple time zones and cultures. Ability to take ownership of a complex problem and work in a structured manner to develop a solution by following an evidence-led development path. Act as a source of technical competency both within the group and across the wider relevant business portfolio. Demonstrate a good understanding of the commercial drivers and benefits associated with development and the steer of activity towards pragmatic and fundamental goals. Excellent record keeping of laboratory experiments. Ability to communicate complex ideas clearly to a non-technical audience. Can understand and analyse complex data. Is able to spot flaws and trends and work around these. Able to apply scientific reasoning to complex industrial situations. Able to locate & exploit relevant technology from other industries. An innovative and logical thinker. Energetic, enthusiastic, flexible and adaptable. Willing to offer a 'hands on' approach. Willing to travel nationally and internationally. Able to prioritise work according to business need. Competent carrying out COSHH and risk assessments and works with a focus on Health and Safety. Able to delegate work according to business need and technical strategy. Attributes Be a self-motivated and proactive individual. Work effectively with people beyond educational / age / background peer group. Leadership and mentorship qualities. Be able to work as part of a team. Be able to communicate effectively with people at all levels. Be persistent, energetic & enthusiastic and adaptable to achieve objectives. Pursue continuous improvement, both in the workplace and in their own skills & knowledge. Be customer and supplier facing. Encourage and develop others to achieve personal and team objectives. Morgan Advanced Materials is an Equal Opportunity Employer. We are committed to creating an inclusive environment for all employees and applicants. We do not discriminate based on race, religion, gender, sexual orientation, gender identity, age, disability, national origin, veteran status, or any other legally protected status. Ind-1