21 jobs found

Principal Electrical Design Engineer - Protection & Control Scotland Region Permanent - Full Time, hybrid Salary Competitive + Car Allowance + Flexible Benefits Summary: This role involves designing and overseeing the implementation of protection schemes, control systems, and related equipment to ensure the safe and reliable operation of power networks, substations, and Transmissions and Distribution electrical infrastructure. Position requires technical expertise and vast experience working in Transmission and Distribution sector for protection & control and Substation Automation system/SCADA design (from 11kV up to 400kV). Candidate should lead the design and specification of protection and control systems for electrical substations, powerplants, and transmission/distribution networks. Roles & Responsibilities: Candidate is responsible to develop protection settings, relay PSL files, coordination studies, including fault detection and isolation strategies. Candidates should have complete knowledge of all TSO/DNO standards & specifications with respect to P&C Design & Calculations, as well as overall Substation Design Works. He/She should ensure compliance with relevant national and international standards (e.g., IEC, BS, IEEE) in protection system design. Candidate should have good knowledge of substation primary design and substation equipment/switchgear specifications. He/She should ensure that the design meets safety standards and regulatory requirements, incorporating protection against electrical hazards, arc flash, and other safety concerns. Design, implement and maintain SCADA/communication systems for a variety of clients in sectors including utilities, oil and gas, manufacturing, industrial automation and various other communication networks. Configure and optimize network infrastructure & communication protocols such as IEC 61850; Distributed Network Protocol (DNP 3); Parallel Redundancy Protocol (PRP); Precision Time Protocol (PTP); Network Time Protocol (NTP); Simplified Network Time Protocol (NTP), Modbus, OPC, Profibus, etc for seamless integration with field devices, including RTUs, PLCs, IEDs, etc, also ensure stable connectivity between SCADA centres & remote sites, and configure secure VPNs & remote access protocols to allow for safe, off-site monitoring and control. Understand client requirements & produce network architecture philosophy diagram, IED telecommunication diagram, SCADA & Telecommunications Panel design, Network IP allocation, I/O Schedules, Cable & Core schedules, etc. Assist with the setup and commissioning of SCADA systems at client sites, troubleshoot field devices and network communication issues, perform preventive and corrective maintenance on SCADA infrastructure and associated hardware. Efficiently design/develop the SCADA/communication systems (e.g., Ignition, Siemens WinCC, GE iFIX, etc) to ensure real-time data acquisition and control for critical infrastructure. Provide remote support for troubleshooting SCADA system and network issues, ensuring minimal downtime and swift resolution of critical incidents. Conduct system upgrades, testing, and validation for new features, components, and patches. Implement cybersecurity measures to safeguard SCADA systems against emerging threats. Collaborate with cross-functional teams to ensure smooth integration and deployment of SCADA systems. Candidate should have experience in tendering, pricing jobs, proposal creation. Candidate should be actively participating in work winning process. Candidate should be capable of technically assessing engineering problems and critically evaluating a range of technical solutions. Unwavering confidence in technically assessing engineering problems and critically evaluating a range of technical solutions will be instrumental in pursuit of engineering excellence. Exemplary communication skills to demonstrate diligence, prioritize tasks effectively, and ensure a thorough understanding of relevant legislation, including CDM and ESQCR. This knowledge will be pivotal in managing Transmission and Distribution network. Collaborate closely with other designers, construction professionals, and engineering teams. Liaise effectively with the Power Systems, Primary and Civil design departments to ensure that all objectives are met and that the best possible design is submitted. Review and provide constructive feedback on the reports and drawings done by Junior & Senior Engineers. Provide technical leadership and mentoring to junior engineers in the design, analysis, and commissioning of protection systems. What we're looking for : Experience: Extensive experience in electrical protection and control system design, Substation Automation and SCADA system typically 12-15 years, with a proven track record of delivering complex projects within the power sector. Technical and Professional knowledge and experience associated with the role. Candidate should have vast experience in crafting Single Line Diagrams, AC & DC Schematic Drawings, Panel General Arrangements, Panel Wiring Diagrams, Switchgear Termination/interconnection drawings, Block Cable Diagrams/Schedules, and performing cable specification/sizing calculations, battery sizing calculations, CT/VT sizing, multicore sizing, Relays CORTEC/specifications. Candidate should have experience in testing & commissioning of P&C, SCADA/Communication/SAS panels. Should be able to Identify potential risks and failures within protection and SCADA systems and propose mitigation strategies. Candidate should have good knowledge & experience working with AutoCAD. Qualifications: Education: Bachelor's degree in electrical engineering (typically 2:1 or above) in Electrical Engineering, Power Systems, or a related field. A master's degree may be preferred for senior roles.Chartered Status (Preferred): Chartered Engineer (CEng) status with a professional body such as the Institution of Engineering and Technology (IET) or the Institution of Electrical Engineers (IEE) is highly desirable.Certifications (Optional): Professional certifications such as NEBOSH for health and safety, or specific training in protection and control system design, may be beneficial.Candidate should have experience working in Substation Automation Syste

Job Title: Principal Cyber Security Engineer Location: Barrow-In-Furness - We offer a range of hybrid and flexible working arrangements - please speak to your recruiter about the options for this particular role. Salary: Negotiable, depending on experience What you'll be doing: Manage and deliver a Submarines Business Unit Product Security Assurance Audit schedule within the scope of EPAD Be able to plan and manage work concurrently across multiple security work programmes Be able to select appropriate Product Security Assurance techniques which are consistent and repeatable for use across a programme Represent the EPAD at Design Reviews and other various engagements, to ensure that Product Security is appropriately considered at each stage of the design lifecycle Be able to contribute and influence the development of Product Security strategies, policies, guidance, good practices and awareness Ensure that Product Security activities within a programme, a project, system or equipment, are delivered and managed using recognised techniques and in accordance with the Submarines Product Security Management System (PsecMS) Provide regular updates on assurance status/progress in accordance with programme/project specific reporting cycles Your skills and experiences: Essential: Degree (or equivalent experience) in a relevant STEM subject or Information Security related. Relevant Professional certification such as CISSP, CISM or CCP SIRA status (or able to achieve) Desirable: Experience in Cyber Security in relation to DEFCON 658, DEFSTAN 05-138, MOD Accreditation/Secure by Design ISO 27001 Lead Auditor or Implementer Benefits: As well as a competitive pension scheme, BAE Systems also offers employee share plans, an extensive range of flexible discounted health, wellbeing and lifestyle benefits, including a green car scheme, private health plans and shopping discounts - you may also be eligible for an annual incentive. The Engineering Product Assurance Department: The Product Security Assurance Principal Engineer will be a focal point for security and information risk matters within the Engineering Product Assurance Department (EPAD). They will have Governance, Risk and Compliance (GRC) subject matter expertise and will be responsible for development of the strategy within the scope of EPAD. The Principal Engineer will be able to apply their deep level of subject matter expertise and experience to ensure that submarine systems and products are delivered and can be managed and supported through-life. Why BAE Systems? This is a place where you'll be able to make a real difference. You'll be part of an inclusive culture that values diversity of thought, rewards integrity, and merit, and where you'll be empowered to fulfil your potential. We welcome people from all backgrounds and want to make sure that our recruitment processes are as inclusive as possible. If you have a disability or health condition (for example dyslexia, autism, an anxiety disorder etc.) that may affect your performance in certain assessment types, please speak to your recruiter about potential reasonable adjustments. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role, to allow for meaningful security vetting checks. Closing Date: 7 th October 2025 We reserve the right to close this vacancy early if we receive sufficient applications for the role. Therefore, if you are interested, please submit your application as early as possible.

Job Title: Principal Cyber Security Engineer Location: Barrow-In-Furness - We offer a range of hybrid and flexible working arrangements - please speak to your recruiter about the options for this particular role. Salary: Negotiable, depending on experience What you'll be doing: Manage and deliver a Submarines Business Unit Product Security Assurance Audit schedule within the scope of EPAD Be able to plan and manage work concurrently across multiple security work programmes Be able to select appropriate Product Security Assurance techniques which are consistent and repeatable for use across a programme Represent the EPAD at Design Reviews and other various engagements, to ensure that Product Security is appropriately considered at each stage of the design lifecycle Be able to contribute and influence the development of Product Security strategies, policies, guidance, good practices and awareness Ensure that Product Security activities within a programme, a project, system or equipment, are delivered and managed using recognised techniques and in accordance with the Submarines Product Security Management System (PsecMS) Provide regular updates on assurance status/progress in accordance with programme/project specific reporting cycles Your skills and experiences: Essential: Degree (or equivalent experience) in a relevant STEM subject or Information Security related. Relevant Professional certification such as CISSP, CISM or CCP SIRA status (or able to achieve) Desirable: Experience in Cyber Security in relation to DEFCON 658, DEFSTAN 05-138, MOD Accreditation/Secure by Design ISO 27001 Lead Auditor or Implementer Benefits: As well as a competitive pension scheme, BAE Systems also offers employee share plans, an extensive range of flexible discounted health, wellbeing and lifestyle benefits, including a green car scheme, private health plans and shopping discounts - you may also be eligible for an annual incentive. The Engineering Product Assurance Department: The Product Security Assurance Principal Engineer will be a focal point for security and information risk matters within the Engineering Product Assurance Department (EPAD). They will have Governance, Risk and Compliance (GRC) subject matter expertise and will be responsible for development of the strategy within the scope of EPAD. The Principal Engineer will be able to apply their deep level of subject matter expertise and experience to ensure that submarine systems and products are delivered and can be managed and supported through-life. Why BAE Systems? This is a place where you'll be able to make a real difference. You'll be part of an inclusive culture that values diversity of thought, rewards integrity, and merit, and where you'll be empowered to fulfil your potential. We welcome people from all backgrounds and want to make sure that our recruitment processes are as inclusive as possible. If you have a disability or health condition (for example dyslexia, autism, an anxiety disorder etc.) that may affect your performance in certain assessment types, please speak to your recruiter about potential reasonable adjustments. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role, to allow for meaningful security vetting checks. Closing Date: 7 th October 2025 We reserve the right to close this vacancy early if we receive sufficient applications for the role. Therefore, if you are interested, please submit your application as early as possible.

Job Title: Principal Cyber Security Engineer Location: Barrow-In-Furness - We offer a range of hybrid and flexible working arrangements - please speak to your recruiter about the options for this particular role. Salary: Negotiable, depending on experience What you'll be doing: Manage and deliver a Submarines Business Unit Product Security Assurance Audit schedule within the scope of EPAD Be able to plan and manage work concurrently across multiple security work programmes Be able to select appropriate Product Security Assurance techniques which are consistent and repeatable for use across a programme Represent the EPAD at Design Reviews and other various engagements, to ensure that Product Security is appropriately considered at each stage of the design lifecycle Be able to contribute and influence the development of Product Security strategies, policies, guidance, good practices and awareness Ensure that Product Security activities within a programme, a project, system or equipment, are delivered and managed using recognised techniques and in accordance with the Submarines Product Security Management System (PsecMS) Provide regular updates on assurance status/progress in accordance with programme/project specific reporting cycles Your skills and experiences: Essential: Degree (or equivalent experience) in a relevant STEM subject or Information Security related. Relevant Professional certification such as CISSP, CISM or CCP SIRA status (or able to achieve) Desirable: Experience in Cyber Security in relation to DEFCON 658, DEFSTAN 05-138, MOD Accreditation/Secure by Design ISO 27001 Lead Auditor or Implementer Benefits: As well as a competitive pension scheme, BAE Systems also offers employee share plans, an extensive range of flexible discounted health, wellbeing and lifestyle benefits, including a green car scheme, private health plans and shopping discounts - you may also be eligible for an annual incentive. The Engineering Product Assurance Department: The Product Security Assurance Principal Engineer will be a focal point for security and information risk matters within the Engineering Product Assurance Department (EPAD). They will have Governance, Risk and Compliance (GRC) subject matter expertise and will be responsible for development of the strategy within the scope of EPAD. The Principal Engineer will be able to apply their deep level of subject matter expertise and experience to ensure that submarine systems and products are delivered and can be managed and supported through-life. Why BAE Systems? This is a place where you'll be able to make a real difference. You'll be part of an inclusive culture that values diversity of thought, rewards integrity, and merit, and where you'll be empowered to fulfil your potential. We welcome people from all backgrounds and want to make sure that our recruitment processes are as inclusive as possible. If you have a disability or health condition (for example dyslexia, autism, an anxiety disorder etc.) that may affect your performance in certain assessment types, please speak to your recruiter about potential reasonable adjustments. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role, to allow for meaningful security vetting checks. Closing Date: 7 th October 2025 We reserve the right to close this vacancy early if we receive sufficient applications for the role. Therefore, if you are interested, please submit your application as early as possible.

Job Title: Principal Cyber Security Engineer Location: Barrow-In-Furness - We offer a range of hybrid and flexible working arrangements - please speak to your recruiter about the options for this particular role. Salary: Negotiable, depending on experience What you'll be doing: Manage and deliver a Submarines Business Unit Product Security Assurance Audit schedule within the scope of EPAD Be able to plan and manage work concurrently across multiple security work programmes Be able to select appropriate Product Security Assurance techniques which are consistent and repeatable for use across a programme Represent the EPAD at Design Reviews and other various engagements, to ensure that Product Security is appropriately considered at each stage of the design lifecycle Be able to contribute and influence the development of Product Security strategies, policies, guidance, good practices and awareness Ensure that Product Security activities within a programme, a project, system or equipment, are delivered and managed using recognised techniques and in accordance with the Submarines Product Security Management System (PsecMS) Provide regular updates on assurance status/progress in accordance with programme/project specific reporting cycles Your skills and experiences: Essential: Degree (or equivalent experience) in a relevant STEM subject or Information Security related. Relevant Professional certification such as CISSP, CISM or CCP SIRA status (or able to achieve) Desirable: Experience in Cyber Security in relation to DEFCON 658, DEFSTAN 05-138, MOD Accreditation/Secure by Design ISO 27001 Lead Auditor or Implementer Benefits: As well as a competitive pension scheme, BAE Systems also offers employee share plans, an extensive range of flexible discounted health, wellbeing and lifestyle benefits, including a green car scheme, private health plans and shopping discounts - you may also be eligible for an annual incentive. The Engineering Product Assurance Department: The Product Security Assurance Principal Engineer will be a focal point for security and information risk matters within the Engineering Product Assurance Department (EPAD). They will have Governance, Risk and Compliance (GRC) subject matter expertise and will be responsible for development of the strategy within the scope of EPAD. The Principal Engineer will be able to apply their deep level of subject matter expertise and experience to ensure that submarine systems and products are delivered and can be managed and supported through-life. Why BAE Systems? This is a place where you'll be able to make a real difference. You'll be part of an inclusive culture that values diversity of thought, rewards integrity, and merit, and where you'll be empowered to fulfil your potential. We welcome people from all backgrounds and want to make sure that our recruitment processes are as inclusive as possible. If you have a disability or health condition (for example dyslexia, autism, an anxiety disorder etc.) that may affect your performance in certain assessment types, please speak to your recruiter about potential reasonable adjustments. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role, to allow for meaningful security vetting checks. Closing Date: 7 th October 2025 We reserve the right to close this vacancy early if we receive sufficient applications for the role. Therefore, if you are interested, please submit your application as early as possible.

Job Title: Principal Cyber Security Engineer Location: Barrow-In-Furness - We offer a range of hybrid and flexible working arrangements - please speak to your recruiter about the options for this particular role. Salary: Negotiable, depending on experience What you'll be doing: Manage and deliver a Submarines Business Unit Product Security Assurance Audit schedule within the scope of EPAD Be able to plan and manage work concurrently across multiple security work programmes Be able to select appropriate Product Security Assurance techniques which are consistent and repeatable for use across a programme Represent the EPAD at Design Reviews and other various engagements, to ensure that Product Security is appropriately considered at each stage of the design lifecycle Be able to contribute and influence the development of Product Security strategies, policies, guidance, good practices and awareness Ensure that Product Security activities within a programme, a project, system or equipment, are delivered and managed using recognised techniques and in accordance with the Submarines Product Security Management System (PsecMS) Provide regular updates on assurance status/progress in accordance with programme/project specific reporting cycles Your skills and experiences: Essential: Degree (or equivalent experience) in a relevant STEM subject or Information Security related. Relevant Professional certification such as CISSP, CISM or CCP SIRA status (or able to achieve) Desirable: Experience in Cyber Security in relation to DEFCON 658, DEFSTAN 05-138, MOD Accreditation/Secure by Design ISO 27001 Lead Auditor or Implementer Benefits: As well as a competitive pension scheme, BAE Systems also offers employee share plans, an extensive range of flexible discounted health, wellbeing and lifestyle benefits, including a green car scheme, private health plans and shopping discounts - you may also be eligible for an annual incentive. The Engineering Product Assurance Department: The Product Security Assurance Principal Engineer will be a focal point for security and information risk matters within the Engineering Product Assurance Department (EPAD). They will have Governance, Risk and Compliance (GRC) subject matter expertise and will be responsible for development of the strategy within the scope of EPAD. The Principal Engineer will be able to apply their deep level of subject matter expertise and experience to ensure that submarine systems and products are delivered and can be managed and supported through-life. Why BAE Systems? This is a place where you'll be able to make a real difference. You'll be part of an inclusive culture that values diversity of thought, rewards integrity, and merit, and where you'll be empowered to fulfil your potential. We welcome people from all backgrounds and want to make sure that our recruitment processes are as inclusive as possible. If you have a disability or health condition (for example dyslexia, autism, an anxiety disorder etc.) that may affect your performance in certain assessment types, please speak to your recruiter about potential reasonable adjustments. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role, to allow for meaningful security vetting checks. Closing Date: 7 th October 2025 We reserve the right to close this vacancy early if we receive sufficient applications for the role. Therefore, if you are interested, please submit your application as early as possible.

Job Title: Principal Cyber Security Engineer Location: Barrow-In-Furness - We offer a range of hybrid and flexible working arrangements - please speak to your recruiter about the options for this particular role. Salary: Negotiable, depending on experience What you'll be doing: Manage and deliver a Submarines Business Unit Product Security Assurance Audit schedule within the scope of EPAD Be able to plan and manage work concurrently across multiple security work programmes Be able to select appropriate Product Security Assurance techniques which are consistent and repeatable for use across a programme Represent the EPAD at Design Reviews and other various engagements, to ensure that Product Security is appropriately considered at each stage of the design lifecycle Be able to contribute and influence the development of Product Security strategies, policies, guidance, good practices and awareness Ensure that Product Security activities within a programme, a project, system or equipment, are delivered and managed using recognised techniques and in accordance with the Submarines Product Security Management System (PsecMS) Provide regular updates on assurance status/progress in accordance with programme/project specific reporting cycles Your skills and experiences: Essential: Degree (or equivalent experience) in a relevant STEM subject or Information Security related. Relevant Professional certification such as CISSP, CISM or CCP SIRA status (or able to achieve) Desirable: Experience in Cyber Security in relation to DEFCON 658, DEFSTAN 05-138, MOD Accreditation/Secure by Design ISO 27001 Lead Auditor or Implementer Benefits: As well as a competitive pension scheme, BAE Systems also offers employee share plans, an extensive range of flexible discounted health, wellbeing and lifestyle benefits, including a green car scheme, private health plans and shopping discounts - you may also be eligible for an annual incentive. The Engineering Product Assurance Department: The Product Security Assurance Principal Engineer will be a focal point for security and information risk matters within the Engineering Product Assurance Department (EPAD). They will have Governance, Risk and Compliance (GRC) subject matter expertise and will be responsible for development of the strategy within the scope of EPAD. The Principal Engineer will be able to apply their deep level of subject matter expertise and experience to ensure that submarine systems and products are delivered and can be managed and supported through-life. Why BAE Systems? This is a place where you'll be able to make a real difference. You'll be part of an inclusive culture that values diversity of thought, rewards integrity, and merit, and where you'll be empowered to fulfil your potential. We welcome people from all backgrounds and want to make sure that our recruitment processes are as inclusive as possible. If you have a disability or health condition (for example dyslexia, autism, an anxiety disorder etc.) that may affect your performance in certain assessment types, please speak to your recruiter about potential reasonable adjustments. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role, to allow for meaningful security vetting checks. Closing Date: 7 th October 2025 We reserve the right to close this vacancy early if we receive sufficient applications for the role. Therefore, if you are interested, please submit your application as early as possible.

Job Title: Principal Cyber Security Engineer Location: Barrow-In-Furness - We offer a range of hybrid and flexible working arrangements - please speak to your recruiter about the options for this particular role. Salary: Negotiable, depending on experience What you'll be doing: Manage and deliver a Submarines Business Unit Product Security Assurance Audit schedule within the scope of EPAD Be able to plan and manage work concurrently across multiple security work programmes Be able to select appropriate Product Security Assurance techniques which are consistent and repeatable for use across a programme Represent the EPAD at Design Reviews and other various engagements, to ensure that Product Security is appropriately considered at each stage of the design lifecycle Be able to contribute and influence the development of Product Security strategies, policies, guidance, good practices and awareness Ensure that Product Security activities within a programme, a project, system or equipment, are delivered and managed using recognised techniques and in accordance with the Submarines Product Security Management System (PsecMS) Provide regular updates on assurance status/progress in accordance with programme/project specific reporting cycles Your skills and experiences: Essential: Degree (or equivalent experience) in a relevant STEM subject or Information Security related. Relevant Professional certification such as CISSP, CISM or CCP SIRA status (or able to achieve) Desirable: Experience in Cyber Security in relation to DEFCON 658, DEFSTAN 05-138, MOD Accreditation/Secure by Design ISO 27001 Lead Auditor or Implementer Benefits: As well as a competitive pension scheme, BAE Systems also offers employee share plans, an extensive range of flexible discounted health, wellbeing and lifestyle benefits, including a green car scheme, private health plans and shopping discounts - you may also be eligible for an annual incentive. The Engineering Product Assurance Department: The Product Security Assurance Principal Engineer will be a focal point for security and information risk matters within the Engineering Product Assurance Department (EPAD). They will have Governance, Risk and Compliance (GRC) subject matter expertise and will be responsible for development of the strategy within the scope of EPAD. The Principal Engineer will be able to apply their deep level of subject matter expertise and experience to ensure that submarine systems and products are delivered and can be managed and supported through-life. Why BAE Systems? This is a place where you'll be able to make a real difference. You'll be part of an inclusive culture that values diversity of thought, rewards integrity, and merit, and where you'll be empowered to fulfil your potential. We welcome people from all backgrounds and want to make sure that our recruitment processes are as inclusive as possible. If you have a disability or health condition (for example dyslexia, autism, an anxiety disorder etc.) that may affect your performance in certain assessment types, please speak to your recruiter about potential reasonable adjustments. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role, to allow for meaningful security vetting checks. Closing Date: 7 th October 2025 We reserve the right to close this vacancy early if we receive sufficient applications for the role. Therefore, if you are interested, please submit your application as early as possible.

Job Title: Principal Cyber Security Engineer Location: Barrow-In-Furness - We offer a range of hybrid and flexible working arrangements - please speak to your recruiter about the options for this particular role. Salary: Negotiable, depending on experience What you'll be doing: Manage and deliver a Submarines Business Unit Product Security Assurance Audit schedule within the scope of EPAD Be able to plan and manage work concurrently across multiple security work programmes Be able to select appropriate Product Security Assurance techniques which are consistent and repeatable for use across a programme Represent the EPAD at Design Reviews and other various engagements, to ensure that Product Security is appropriately considered at each stage of the design lifecycle Be able to contribute and influence the development of Product Security strategies, policies, guidance, good practices and awareness Ensure that Product Security activities within a programme, a project, system or equipment, are delivered and managed using recognised techniques and in accordance with the Submarines Product Security Management System (PsecMS) Provide regular updates on assurance status/progress in accordance with programme/project specific reporting cycles Your skills and experiences: Essential: Degree (or equivalent experience) in a relevant STEM subject or Information Security related. Relevant Professional certification such as CISSP, CISM or CCP SIRA status (or able to achieve) Desirable: Experience in Cyber Security in relation to DEFCON 658, DEFSTAN 05-138, MOD Accreditation/Secure by Design ISO 27001 Lead Auditor or Implementer Benefits: As well as a competitive pension scheme, BAE Systems also offers employee share plans, an extensive range of flexible discounted health, wellbeing and lifestyle benefits, including a green car scheme, private health plans and shopping discounts - you may also be eligible for an annual incentive. The Engineering Product Assurance Department: The Product Security Assurance Principal Engineer will be a focal point for security and information risk matters within the Engineering Product Assurance Department (EPAD). They will have Governance, Risk and Compliance (GRC) subject matter expertise and will be responsible for development of the strategy within the scope of EPAD. The Principal Engineer will be able to apply their deep level of subject matter expertise and experience to ensure that submarine systems and products are delivered and can be managed and supported through-life. Why BAE Systems? This is a place where you'll be able to make a real difference. You'll be part of an inclusive culture that values diversity of thought, rewards integrity, and merit, and where you'll be empowered to fulfil your potential. We welcome people from all backgrounds and want to make sure that our recruitment processes are as inclusive as possible. If you have a disability or health condition (for example dyslexia, autism, an anxiety disorder etc.) that may affect your performance in certain assessment types, please speak to your recruiter about potential reasonable adjustments. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role, to allow for meaningful security vetting checks. Closing Date: 7 th October 2025 We reserve the right to close this vacancy early if we receive sufficient applications for the role. Therefore, if you are interested, please submit your application as early as possible.

Job Title: Principal Cyber Security Engineer Location: Barrow-In-Furness - We offer a range of hybrid and flexible working arrangements - please speak to your recruiter about the options for this particular role. Salary: Negotiable, depending on experience What you'll be doing: Manage and deliver a Submarines Business Unit Product Security Assurance Audit schedule within the scope of EPAD Be able to plan and manage work concurrently across multiple security work programmes Be able to select appropriate Product Security Assurance techniques which are consistent and repeatable for use across a programme Represent the EPAD at Design Reviews and other various engagements, to ensure that Product Security is appropriately considered at each stage of the design lifecycle Be able to contribute and influence the development of Product Security strategies, policies, guidance, good practices and awareness Ensure that Product Security activities within a programme, a project, system or equipment, are delivered and managed using recognised techniques and in accordance with the Submarines Product Security Management System (PsecMS) Provide regular updates on assurance status/progress in accordance with programme/project specific reporting cycles Your skills and experiences: Essential: Degree (or equivalent experience) in a relevant STEM subject or Information Security related. Relevant Professional certification such as CISSP, CISM or CCP SIRA status (or able to achieve) Desirable: Experience in Cyber Security in relation to DEFCON 658, DEFSTAN 05-138, MOD Accreditation/Secure by Design ISO 27001 Lead Auditor or Implementer Benefits: As well as a competitive pension scheme, BAE Systems also offers employee share plans, an extensive range of flexible discounted health, wellbeing and lifestyle benefits, including a green car scheme, private health plans and shopping discounts - you may also be eligible for an annual incentive. The Engineering Product Assurance Department: The Product Security Assurance Principal Engineer will be a focal point for security and information risk matters within the Engineering Product Assurance Department (EPAD). They will have Governance, Risk and Compliance (GRC) subject matter expertise and will be responsible for development of the strategy within the scope of EPAD. The Principal Engineer will be able to apply their deep level of subject matter expertise and experience to ensure that submarine systems and products are delivered and can be managed and supported through-life. Why BAE Systems? This is a place where you'll be able to make a real difference. You'll be part of an inclusive culture that values diversity of thought, rewards integrity, and merit, and where you'll be empowered to fulfil your potential. We welcome people from all backgrounds and want to make sure that our recruitment processes are as inclusive as possible. If you have a disability or health condition (for example dyslexia, autism, an anxiety disorder etc.) that may affect your performance in certain assessment types, please speak to your recruiter about potential reasonable adjustments. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role, to allow for meaningful security vetting checks. Closing Date: 7 th October 2025 We reserve the right to close this vacancy early if we receive sufficient applications for the role. Therefore, if you are interested, please submit your application as early as possible.

Job Title: Principal Cyber Security Engineer Location: Barrow-In-Furness - We offer a range of hybrid and flexible working arrangements - please speak to your recruiter about the options for this particular role. Salary: Negotiable, depending on experience What you'll be doing: Manage and deliver a Submarines Business Unit Product Security Assurance Audit schedule within the scope of EPAD Be able to plan and manage work concurrently across multiple security work programmes Be able to select appropriate Product Security Assurance techniques which are consistent and repeatable for use across a programme Represent the EPAD at Design Reviews and other various engagements, to ensure that Product Security is appropriately considered at each stage of the design lifecycle Be able to contribute and influence the development of Product Security strategies, policies, guidance, good practices and awareness Ensure that Product Security activities within a programme, a project, system or equipment, are delivered and managed using recognised techniques and in accordance with the Submarines Product Security Management System (PsecMS) Provide regular updates on assurance status/progress in accordance with programme/project specific reporting cycles Your skills and experiences: Essential: Degree (or equivalent experience) in a relevant STEM subject or Information Security related. Relevant Professional certification such as CISSP, CISM or CCP SIRA status (or able to achieve) Desirable: Experience in Cyber Security in relation to DEFCON 658, DEFSTAN 05-138, MOD Accreditation/Secure by Design ISO 27001 Lead Auditor or Implementer Benefits: As well as a competitive pension scheme, BAE Systems also offers employee share plans, an extensive range of flexible discounted health, wellbeing and lifestyle benefits, including a green car scheme, private health plans and shopping discounts - you may also be eligible for an annual incentive. The Engineering Product Assurance Department: The Product Security Assurance Principal Engineer will be a focal point for security and information risk matters within the Engineering Product Assurance Department (EPAD). They will have Governance, Risk and Compliance (GRC) subject matter expertise and will be responsible for development of the strategy within the scope of EPAD. The Principal Engineer will be able to apply their deep level of subject matter expertise and experience to ensure that submarine systems and products are delivered and can be managed and supported through-life. Why BAE Systems? This is a place where you'll be able to make a real difference. You'll be part of an inclusive culture that values diversity of thought, rewards integrity, and merit, and where you'll be empowered to fulfil your potential. We welcome people from all backgrounds and want to make sure that our recruitment processes are as inclusive as possible. If you have a disability or health condition (for example dyslexia, autism, an anxiety disorder etc.) that may affect your performance in certain assessment types, please speak to your recruiter about potential reasonable adjustments. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role, to allow for meaningful security vetting checks. Closing Date: 7 th October 2025 We reserve the right to close this vacancy early if we receive sufficient applications for the role. Therefore, if you are interested, please submit your application as early as possible.

Job Title: Principal Cyber Security Engineer Location: Barrow-In-Furness - We offer a range of hybrid and flexible working arrangements - please speak to your recruiter about the options for this particular role. Salary: Negotiable, depending on experience What you'll be doing: Manage and deliver a Submarines Business Unit Product Security Assurance Audit schedule within the scope of EPAD Be able to plan and manage work concurrently across multiple security work programmes Be able to select appropriate Product Security Assurance techniques which are consistent and repeatable for use across a programme Represent the EPAD at Design Reviews and other various engagements, to ensure that Product Security is appropriately considered at each stage of the design lifecycle Be able to contribute and influence the development of Product Security strategies, policies, guidance, good practices and awareness Ensure that Product Security activities within a programme, a project, system or equipment, are delivered and managed using recognised techniques and in accordance with the Submarines Product Security Management System (PsecMS) Provide regular updates on assurance status/progress in accordance with programme/project specific reporting cycles Your skills and experiences: Essential: Degree (or equivalent experience) in a relevant STEM subject or Information Security related. Relevant Professional certification such as CISSP, CISM or CCP SIRA status (or able to achieve) Desirable: Experience in Cyber Security in relation to DEFCON 658, DEFSTAN 05-138, MOD Accreditation/Secure by Design ISO 27001 Lead Auditor or Implementer Benefits: As well as a competitive pension scheme, BAE Systems also offers employee share plans, an extensive range of flexible discounted health, wellbeing and lifestyle benefits, including a green car scheme, private health plans and shopping discounts - you may also be eligible for an annual incentive. The Engineering Product Assurance Department: The Product Security Assurance Principal Engineer will be a focal point for security and information risk matters within the Engineering Product Assurance Department (EPAD). They will have Governance, Risk and Compliance (GRC) subject matter expertise and will be responsible for development of the strategy within the scope of EPAD. The Principal Engineer will be able to apply their deep level of subject matter expertise and experience to ensure that submarine systems and products are delivered and can be managed and supported through-life. Why BAE Systems? This is a place where you'll be able to make a real difference. You'll be part of an inclusive culture that values diversity of thought, rewards integrity, and merit, and where you'll be empowered to fulfil your potential. We welcome people from all backgrounds and want to make sure that our recruitment processes are as inclusive as possible. If you have a disability or health condition (for example dyslexia, autism, an anxiety disorder etc.) that may affect your performance in certain assessment types, please speak to your recruiter about potential reasonable adjustments. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role, to allow for meaningful security vetting checks. Closing Date: 7 th October 2025 We reserve the right to close this vacancy early if we receive sufficient applications for the role. Therefore, if you are interested, please submit your application as early as possible.

Job Title: Principal Cyber Security Engineer Location: Barrow-In-Furness - We offer a range of hybrid and flexible working arrangements - please speak to your recruiter about the options for this particular role. Salary: Negotiable, depending on experience What you'll be doing: Manage and deliver a Submarines Business Unit Product Security Assurance Audit schedule within the scope of EPAD Be able to plan and manage work concurrently across multiple security work programmes Be able to select appropriate Product Security Assurance techniques which are consistent and repeatable for use across a programme Represent the EPAD at Design Reviews and other various engagements, to ensure that Product Security is appropriately considered at each stage of the design lifecycle Be able to contribute and influence the development of Product Security strategies, policies, guidance, good practices and awareness Ensure that Product Security activities within a programme, a project, system or equipment, are delivered and managed using recognised techniques and in accordance with the Submarines Product Security Management System (PsecMS) Provide regular updates on assurance status/progress in accordance with programme/project specific reporting cycles Your skills and experiences: Essential: Degree (or equivalent experience) in a relevant STEM subject or Information Security related. Relevant Professional certification such as CISSP, CISM or CCP SIRA status (or able to achieve) Desirable: Experience in Cyber Security in relation to DEFCON 658, DEFSTAN 05-138, MOD Accreditation/Secure by Design ISO 27001 Lead Auditor or Implementer Benefits: As well as a competitive pension scheme, BAE Systems also offers employee share plans, an extensive range of flexible discounted health, wellbeing and lifestyle benefits, including a green car scheme, private health plans and shopping discounts - you may also be eligible for an annual incentive. The Engineering Product Assurance Department: The Product Security Assurance Principal Engineer will be a focal point for security and information risk matters within the Engineering Product Assurance Department (EPAD). They will have Governance, Risk and Compliance (GRC) subject matter expertise and will be responsible for development of the strategy within the scope of EPAD. The Principal Engineer will be able to apply their deep level of subject matter expertise and experience to ensure that submarine systems and products are delivered and can be managed and supported through-life. Why BAE Systems? This is a place where you'll be able to make a real difference. You'll be part of an inclusive culture that values diversity of thought, rewards integrity, and merit, and where you'll be empowered to fulfil your potential. We welcome people from all backgrounds and want to make sure that our recruitment processes are as inclusive as possible. If you have a disability or health condition (for example dyslexia, autism, an anxiety disorder etc.) that may affect your performance in certain assessment types, please speak to your recruiter about potential reasonable adjustments. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role, to allow for meaningful security vetting checks. Closing Date: 7 th October 2025 We reserve the right to close this vacancy early if we receive sufficient applications for the role. Therefore, if you are interested, please submit your application as early as possible.

Job Title: Principal Cyber Security Engineer Location: Barrow-In-Furness - We offer a range of hybrid and flexible working arrangements - please speak to your recruiter about the options for this particular role. Salary: Negotiable, depending on experience What you'll be doing: Manage and deliver a Submarines Business Unit Product Security Assurance Audit schedule within the scope of EPAD Be able to plan and manage work concurrently across multiple security work programmes Be able to select appropriate Product Security Assurance techniques which are consistent and repeatable for use across a programme Represent the EPAD at Design Reviews and other various engagements, to ensure that Product Security is appropriately considered at each stage of the design lifecycle Be able to contribute and influence the development of Product Security strategies, policies, guidance, good practices and awareness Ensure that Product Security activities within a programme, a project, system or equipment, are delivered and managed using recognised techniques and in accordance with the Submarines Product Security Management System (PsecMS) Provide regular updates on assurance status/progress in accordance with programme/project specific reporting cycles Your skills and experiences: Essential: Degree (or equivalent experience) in a relevant STEM subject or Information Security related. Relevant Professional certification such as CISSP, CISM or CCP SIRA status (or able to achieve) Desirable: Experience in Cyber Security in relation to DEFCON 658, DEFSTAN 05-138, MOD Accreditation/Secure by Design ISO 27001 Lead Auditor or Implementer Benefits: As well as a competitive pension scheme, BAE Systems also offers employee share plans, an extensive range of flexible discounted health, wellbeing and lifestyle benefits, including a green car scheme, private health plans and shopping discounts - you may also be eligible for an annual incentive. The Engineering Product Assurance Department: The Product Security Assurance Principal Engineer will be a focal point for security and information risk matters within the Engineering Product Assurance Department (EPAD). They will have Governance, Risk and Compliance (GRC) subject matter expertise and will be responsible for development of the strategy within the scope of EPAD. The Principal Engineer will be able to apply their deep level of subject matter expertise and experience to ensure that submarine systems and products are delivered and can be managed and supported through-life. Why BAE Systems? This is a place where you'll be able to make a real difference. You'll be part of an inclusive culture that values diversity of thought, rewards integrity, and merit, and where you'll be empowered to fulfil your potential. We welcome people from all backgrounds and want to make sure that our recruitment processes are as inclusive as possible. If you have a disability or health condition (for example dyslexia, autism, an anxiety disorder etc.) that may affect your performance in certain assessment types, please speak to your recruiter about potential reasonable adjustments. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role, to allow for meaningful security vetting checks. Closing Date: 7 th October 2025 We reserve the right to close this vacancy early if we receive sufficient applications for the role. Therefore, if you are interested, please submit your application as early as possible.

Job Title: Principal Cyber Security Engineer Location: Barrow-In-Furness - We offer a range of hybrid and flexible working arrangements - please speak to your recruiter about the options for this particular role. Salary: Negotiable, depending on experience What you'll be doing: Manage and deliver a Submarines Business Unit Product Security Assurance Audit schedule within the scope of EPAD Be able to plan and manage work concurrently across multiple security work programmes Be able to select appropriate Product Security Assurance techniques which are consistent and repeatable for use across a programme Represent the EPAD at Design Reviews and other various engagements, to ensure that Product Security is appropriately considered at each stage of the design lifecycle Be able to contribute and influence the development of Product Security strategies, policies, guidance, good practices and awareness Ensure that Product Security activities within a programme, a project, system or equipment, are delivered and managed using recognised techniques and in accordance with the Submarines Product Security Management System (PsecMS) Provide regular updates on assurance status/progress in accordance with programme/project specific reporting cycles Your skills and experiences: Essential: Degree (or equivalent experience) in a relevant STEM subject or Information Security related. Relevant Professional certification such as CISSP, CISM or CCP SIRA status (or able to achieve) Desirable: Experience in Cyber Security in relation to DEFCON 658, DEFSTAN 05-138, MOD Accreditation/Secure by Design ISO 27001 Lead Auditor or Implementer Benefits: As well as a competitive pension scheme, BAE Systems also offers employee share plans, an extensive range of flexible discounted health, wellbeing and lifestyle benefits, including a green car scheme, private health plans and shopping discounts - you may also be eligible for an annual incentive. The Engineering Product Assurance Department: The Product Security Assurance Principal Engineer will be a focal point for security and information risk matters within the Engineering Product Assurance Department (EPAD). They will have Governance, Risk and Compliance (GRC) subject matter expertise and will be responsible for development of the strategy within the scope of EPAD. The Principal Engineer will be able to apply their deep level of subject matter expertise and experience to ensure that submarine systems and products are delivered and can be managed and supported through-life. Why BAE Systems? This is a place where you'll be able to make a real difference. You'll be part of an inclusive culture that values diversity of thought, rewards integrity, and merit, and where you'll be empowered to fulfil your potential. We welcome people from all backgrounds and want to make sure that our recruitment processes are as inclusive as possible. If you have a disability or health condition (for example dyslexia, autism, an anxiety disorder etc.) that may affect your performance in certain assessment types, please speak to your recruiter about potential reasonable adjustments. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role, to allow for meaningful security vetting checks. Closing Date: 7 th October 2025 We reserve the right to close this vacancy early if we receive sufficient applications for the role. Therefore, if you are interested, please submit your application as early as possible.

Job Title: Principal Cyber Security Engineer Location: Barrow-In-Furness - We offer a range of hybrid and flexible working arrangements - please speak to your recruiter about the options for this particular role. Salary: Negotiable, depending on experience What you'll be doing: Manage and deliver a Submarines Business Unit Product Security Assurance Audit schedule within the scope of EPAD Be able to plan and manage work concurrently across multiple security work programmes Be able to select appropriate Product Security Assurance techniques which are consistent and repeatable for use across a programme Represent the EPAD at Design Reviews and other various engagements, to ensure that Product Security is appropriately considered at each stage of the design lifecycle Be able to contribute and influence the development of Product Security strategies, policies, guidance, good practices and awareness Ensure that Product Security activities within a programme, a project, system or equipment, are delivered and managed using recognised techniques and in accordance with the Submarines Product Security Management System (PsecMS) Provide regular updates on assurance status/progress in accordance with programme/project specific reporting cycles Your skills and experiences: Essential: Degree (or equivalent experience) in a relevant STEM subject or Information Security related. Relevant Professional certification such as CISSP, CISM or CCP SIRA status (or able to achieve) Desirable: Experience in Cyber Security in relation to DEFCON 658, DEFSTAN 05-138, MOD Accreditation/Secure by Design ISO 27001 Lead Auditor or Implementer Benefits: As well as a competitive pension scheme, BAE Systems also offers employee share plans, an extensive range of flexible discounted health, wellbeing and lifestyle benefits, including a green car scheme, private health plans and shopping discounts - you may also be eligible for an annual incentive. The Engineering Product Assurance Department: The Product Security Assurance Principal Engineer will be a focal point for security and information risk matters within the Engineering Product Assurance Department (EPAD). They will have Governance, Risk and Compliance (GRC) subject matter expertise and will be responsible for development of the strategy within the scope of EPAD. The Principal Engineer will be able to apply their deep level of subject matter expertise and experience to ensure that submarine systems and products are delivered and can be managed and supported through-life. Why BAE Systems? This is a place where you'll be able to make a real difference. You'll be part of an inclusive culture that values diversity of thought, rewards integrity, and merit, and where you'll be empowered to fulfil your potential. We welcome people from all backgrounds and want to make sure that our recruitment processes are as inclusive as possible. If you have a disability or health condition (for example dyslexia, autism, an anxiety disorder etc.) that may affect your performance in certain assessment types, please speak to your recruiter about potential reasonable adjustments. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role, to allow for meaningful security vetting checks. Closing Date: 7 th October 2025 We reserve the right to close this vacancy early if we receive sufficient applications for the role. Therefore, if you are interested, please submit your application as early as possible.

Job Title: Principal Cyber Security Engineer Location: Barrow-In-Furness - We offer a range of hybrid and flexible working arrangements - please speak to your recruiter about the options for this particular role. Salary: Negotiable, depending on experience What you'll be doing: Manage and deliver a Submarines Business Unit Product Security Assurance Audit schedule within the scope of EPAD Be able to plan and manage work concurrently across multiple security work programmes Be able to select appropriate Product Security Assurance techniques which are consistent and repeatable for use across a programme Represent the EPAD at Design Reviews and other various engagements, to ensure that Product Security is appropriately considered at each stage of the design lifecycle Be able to contribute and influence the development of Product Security strategies, policies, guidance, good practices and awareness Ensure that Product Security activities within a programme, a project, system or equipment, are delivered and managed using recognised techniques and in accordance with the Submarines Product Security Management System (PsecMS) Provide regular updates on assurance status/progress in accordance with programme/project specific reporting cycles Your skills and experiences: Essential: Degree (or equivalent experience) in a relevant STEM subject or Information Security related. Relevant Professional certification such as CISSP, CISM or CCP SIRA status (or able to achieve) Desirable: Experience in Cyber Security in relation to DEFCON 658, DEFSTAN 05-138, MOD Accreditation/Secure by Design ISO 27001 Lead Auditor or Implementer Benefits: As well as a competitive pension scheme, BAE Systems also offers employee share plans, an extensive range of flexible discounted health, wellbeing and lifestyle benefits, including a green car scheme, private health plans and shopping discounts - you may also be eligible for an annual incentive. The Engineering Product Assurance Department: The Product Security Assurance Principal Engineer will be a focal point for security and information risk matters within the Engineering Product Assurance Department (EPAD). They will have Governance, Risk and Compliance (GRC) subject matter expertise and will be responsible for development of the strategy within the scope of EPAD. The Principal Engineer will be able to apply their deep level of subject matter expertise and experience to ensure that submarine systems and products are delivered and can be managed and supported through-life. Why BAE Systems? This is a place where you'll be able to make a real difference. You'll be part of an inclusive culture that values diversity of thought, rewards integrity, and merit, and where you'll be empowered to fulfil your potential. We welcome people from all backgrounds and want to make sure that our recruitment processes are as inclusive as possible. If you have a disability or health condition (for example dyslexia, autism, an anxiety disorder etc.) that may affect your performance in certain assessment types, please speak to your recruiter about potential reasonable adjustments. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role, to allow for meaningful security vetting checks. Closing Date: 7 th October 2025 We reserve the right to close this vacancy early if we receive sufficient applications for the role. Therefore, if you are interested, please submit your application as early as possible.

Senior Machine Learning Engineer - Behavioural Modeling & Threat Detection - £150,000 - £180,000 - Fully Remote UK BASED CANDIDATES ONLY My client is looking for an experienced Machine Learning Engineer ready to play a pivotal role in shaping the technical direction of their behavioural modelling and threat detection systems. This position offers the opportunity to influence not just their engineering roadmap, but how they fundamentally approach solving complex, real-world security challenges with data. You'll work at the intersection of data science, ML infrastructure, and product innovation, leading efforts to build and evolve ML-driven capabilities, while also ensuring the reliability and scalability of their models in production environments. What You'll Do Spearhead the design and refinement of machine learning models focused on understanding behaviour patterns and identifying cybersecurity anomalies. Partner with product, engineering, and domain experts to translate strategic goals and customer needs into practical, scalable ML solutions. Drive model development end-to-end, from exploratory analysis, feature design, and prototyping to validation and deployment. Collaborate with platform and infra teams to operationalize models and ship ML-powered features into production. Continuously assess and iterate on production models, balancing long-term ML strategy with tactical improvements. Champion code quality, observability, and resilience within their ML systems through reviews and hands-on contributions. Help shape their internal ML standards and practices, ensuring they stay ahead of industry advancements. Offer technical mentorship and be a thought partner to colleagues across data, ML, and engineering disciplines. What We're Looking For Hands-on experience in developing and deploying machine learning models at scale. Deep familiarity with core ML concepts (classification, time-series, statistical modeling) and their real-world tradeoffs. Fluency in Python and commonly used ML libraries (e.g. pandas, scikit-learn; experience with PyTorch or TensorFlow is a plus). Experience with model lifecycle management (MLOps), including monitoring, retraining, and model versioning. Ability to work across data infrastructure, from SQL to large-scale distributed data tools (Spark, etc.). Strong written and verbal communication skills, especially in cross-functional contexts. Bonus Experience (Nice to Have) Exposure to large language models (LLMs) or foundational model adaptation. Previous work in cybersecurity, anomaly detection, or behavioural analytics. Familiarity with orchestration frameworks (Airflow or similar). Experience with scalable ML systems, pipelines, or real-time data processing. Advanced degree or equivalent experience in ML/AI research or applied science. Cloud platform proficiency (AWS, GCP, Azure). If this sounds like something you would be interested in, please apply with your latest CV, a number to reach you on and I will be in touch. Alternatively, you can email me at . RSG Plc is acting as an Employment Agency in relation to this vacancy.

Job Title: Lead Security Solution Architect- PAM Location: Hybrid-London, UK (Days/Week Onsite) Duration: 6months+ 550GBP/Day Inside IR35 Project Overview CLIENT is working on a strategic Identity and Access Management programme and is re-shaping the way Authentication, Federation, Privileged Access Management, Access Governance, Secrets Management and API Security is done across the bank. One of the pillars of that programe is Privileged Access Management (PAM). CLIENT is working on uplifting controls and capabilities in privileged access for the Group and introducing the strategic password vaulting solution that will enable to meet strategic requirements. We are seeking an experienced Lead Security Solution Architect that can complement an existing team of Solution Architects to progress with designs of different components of the PAM solution and other supporting systems it will need to integrate with as part of the end-to-end journey. Security Solution Architects manage end-to-end solution design and are responsible for delivering architecture design documents in line with functional and non-functional business requirements, strategies, principles, standards, and patterns. Alongside the creation of high-level designs, Security Solution Architects will be required to record key decisions, design deviations, and technical risks and issues where appropriate. Security Solution Architects should be comfortable presenting and sharing solutions at design authorities and senior leadership & stakeholders. The Lead Security Solution Architect will provide technical thought leadership and direction to their project team and may represent the project/programme as subject matter expert. This role will require someone experienced in managing a team of on-shore and off-shore resources to deliver High- and Low-level designs to the required quality and standard. Principal Preferred Requirements Cybersecurity Expertise: Significant experience and proven technical depth within one of the following domains of cybersecurity; security operations & incident response, threat & vulnerability management, identity & access management, cryptography, infrastructure, network, application, data, cloud Broad background across information technology with the ability to communicate clearly with non-security technical SMEs at a comfortable level Experience in both operational and transformation cybersecurity roles or a clear working understanding of both perspectives Experience working in large-scale IT transformation programmes Experience working with PAM solutions such as CyberArk, Centrify, Delinea and OneIdentity Preparing end-to-end configuration of the strategic PAM capability - including on-prem deployments as well as Cloud native toolings Assisting in preparation of demonstrable journeys on the configured PAM tooling Platform & Technology: BizzDesign, Archi, or generic UML visualisation experience for high-level designs High proficiency and expertise in Jira for project & tasks management Working proficiency in Confluence for documentation Principal Accountabilities and Responsibilities Architecture & Design: Produce, manage, and update end-to-end solution designs in line with reference architecture & business requirements (including High and Low Level Designs Articulate and publish key design decision records and options to ensure all solutions follow a logical, transparent decision-making process Articulate, publish, and ensure approval of any design deviations resulting in technical debt Ensure any technical risks or issues arising from a solution design are recorded and mitigated. Produces, manages and translates the requirements into the architecture for that solution, ensuring technology and services meet the customer needs and expected business outcomes Ensures the design of the solutions are efficient, timely and cost effective throughout the project life cycle Clear understanding of both the motivations of the business and technical security Promote strong documentation and clerkship Governance: Ensures all high-level designs, architecture patterns, decision records, deviation requests, and technical risks or issue records undergo architectural and project governance processes Ensure all architecture artefacts undergo appropriate peer review prior to design authority presentation Present publications at technical design authorities for input, feedback, and approval Risk and Dependency Management: Effectively manages and escalates both technical and project risks or issues Articulates solutions and remediation steps to technical risks & issues Ability to map design decisions to resultant technical risks & issues to articulate the cause and rationale which leads to any negatively impacting change Leadership & Teamwork Provides technical thought leadership to the Design Team and the Project Ability to manage a project team of technical architects, engineers, and/or analysts Ability to take a deputised role in programme management-related tasks where necessary Qualifications & Certifications: Masters or doctorate degree in cybersecurity, computer science, software engineering, or related field CISSP/CISM certification or other broad cybersecurity industry-recognised certificate SABSA or TOGAF certified preferred Priyanka Sharma Senior Delivery Consultant