Principal Electrical Design Engineer - Protection & Control Scotland Region Permanent - Full Time, hybrid Salary Competitive + Car Allowance + Flexible Benefits Summary: This role involves designing and overseeing the implementation of protection schemes, control systems, and related equipment to ensure the safe and reliable operation of power networks, substations, and Transmissions and Distribution electrical infrastructure. Position requires technical expertise and vast experience working in Transmission and Distribution sector for protection & control and Substation Automation system/SCADA design (from 11kV up to 400kV). Candidate should lead the design and specification of protection and control systems for electrical substations, powerplants, and transmission/distribution networks. Roles & Responsibilities: Candidate is responsible to develop protection settings, relay PSL files, coordination studies, including fault detection and isolation strategies. Candidates should have complete knowledge of all TSO/DNO standards & specifications with respect to P&C Design & Calculations, as well as overall Substation Design Works. He/She should ensure compliance with relevant national and international standards (e.g., IEC, BS, IEEE) in protection system design. Candidate should have good knowledge of substation primary design and substation equipment/switchgear specifications. He/She should ensure that the design meets safety standards and regulatory requirements, incorporating protection against electrical hazards, arc flash, and other safety concerns. Design, implement and maintain SCADA/communication systems for a variety of clients in sectors including utilities, oil and gas, manufacturing, industrial automation and various other communication networks. Configure and optimize network infrastructure & communication protocols such as IEC 61850; Distributed Network Protocol (DNP 3); Parallel Redundancy Protocol (PRP); Precision Time Protocol (PTP); Network Time Protocol (NTP); Simplified Network Time Protocol (NTP), Modbus, OPC, Profibus, etc for seamless integration with field devices, including RTUs, PLCs, IEDs, etc, also ensure stable connectivity between SCADA centres & remote sites, and configure secure VPNs & remote access protocols to allow for safe, off-site monitoring and control. Understand client requirements & produce network architecture philosophy diagram, IED telecommunication diagram, SCADA & Telecommunications Panel design, Network IP allocation, I/O Schedules, Cable & Core schedules, etc. Assist with the setup and commissioning of SCADA systems at client sites, troubleshoot field devices and network communication issues, perform preventive and corrective maintenance on SCADA infrastructure and associated hardware. Efficiently design/develop the SCADA/communication systems (e.g., Ignition, Siemens WinCC, GE iFIX, etc) to ensure real-time data acquisition and control for critical infrastructure. Provide remote support for troubleshooting SCADA system and network issues, ensuring minimal downtime and swift resolution of critical incidents. Conduct system upgrades, testing, and validation for new features, components, and patches. Implement cybersecurity measures to safeguard SCADA systems against emerging threats. Collaborate with cross-functional teams to ensure smooth integration and deployment of SCADA systems. Candidate should have experience in tendering, pricing jobs, proposal creation. Candidate should be actively participating in work winning process. Candidate should be capable of technically assessing engineering problems and critically evaluating a range of technical solutions. Unwavering confidence in technically assessing engineering problems and critically evaluating a range of technical solutions will be instrumental in pursuit of engineering excellence. Exemplary communication skills to demonstrate diligence, prioritize tasks effectively, and ensure a thorough understanding of relevant legislation, including CDM and ESQCR. This knowledge will be pivotal in managing Transmission and Distribution network. Collaborate closely with other designers, construction professionals, and engineering teams. Liaise effectively with the Power Systems, Primary and Civil design departments to ensure that all objectives are met and that the best possible design is submitted. Review and provide constructive feedback on the reports and drawings done by Junior & Senior Engineers. Provide technical leadership and mentoring to junior engineers in the design, analysis, and commissioning of protection systems. What we're looking for : Experience: Extensive experience in electrical protection and control system design, Substation Automation and SCADA system typically 12-15 years, with a proven track record of delivering complex projects within the power sector. Technical and Professional knowledge and experience associated with the role. Candidate should have vast experience in crafting Single Line Diagrams, AC & DC Schematic Drawings, Panel General Arrangements, Panel Wiring Diagrams, Switchgear Termination/interconnection drawings, Block Cable Diagrams/Schedules, and performing cable specification/sizing calculations, battery sizing calculations, CT/VT sizing, multicore sizing, Relays CORTEC/specifications. Candidate should have experience in testing & commissioning of P&C, SCADA/Communication/SAS panels. Should be able to Identify potential risks and failures within protection and SCADA systems and propose mitigation strategies. Candidate should have good knowledge & experience working with AutoCAD. Qualifications: Education: Bachelor's degree in electrical engineering (typically 2:1 or above) in Electrical Engineering, Power Systems, or a related field. A master's degree may be preferred for senior roles.Chartered Status (Preferred): Chartered Engineer (CEng) status with a professional body such as the Institution of Engineering and Technology (IET) or the Institution of Electrical Engineers (IEE) is highly desirable.Certifications (Optional): Professional certifications such as NEBOSH for health and safety, or specific training in protection and control system design, may be beneficial.Candidate should have experience working in Substation Automation Syste
May 13, 2026
Full time
Principal Electrical Design Engineer - Protection & Control Scotland Region Permanent - Full Time, hybrid Salary Competitive + Car Allowance + Flexible Benefits Summary: This role involves designing and overseeing the implementation of protection schemes, control systems, and related equipment to ensure the safe and reliable operation of power networks, substations, and Transmissions and Distribution electrical infrastructure. Position requires technical expertise and vast experience working in Transmission and Distribution sector for protection & control and Substation Automation system/SCADA design (from 11kV up to 400kV). Candidate should lead the design and specification of protection and control systems for electrical substations, powerplants, and transmission/distribution networks. Roles & Responsibilities: Candidate is responsible to develop protection settings, relay PSL files, coordination studies, including fault detection and isolation strategies. Candidates should have complete knowledge of all TSO/DNO standards & specifications with respect to P&C Design & Calculations, as well as overall Substation Design Works. He/She should ensure compliance with relevant national and international standards (e.g., IEC, BS, IEEE) in protection system design. Candidate should have good knowledge of substation primary design and substation equipment/switchgear specifications. He/She should ensure that the design meets safety standards and regulatory requirements, incorporating protection against electrical hazards, arc flash, and other safety concerns. Design, implement and maintain SCADA/communication systems for a variety of clients in sectors including utilities, oil and gas, manufacturing, industrial automation and various other communication networks. Configure and optimize network infrastructure & communication protocols such as IEC 61850; Distributed Network Protocol (DNP 3); Parallel Redundancy Protocol (PRP); Precision Time Protocol (PTP); Network Time Protocol (NTP); Simplified Network Time Protocol (NTP), Modbus, OPC, Profibus, etc for seamless integration with field devices, including RTUs, PLCs, IEDs, etc, also ensure stable connectivity between SCADA centres & remote sites, and configure secure VPNs & remote access protocols to allow for safe, off-site monitoring and control. Understand client requirements & produce network architecture philosophy diagram, IED telecommunication diagram, SCADA & Telecommunications Panel design, Network IP allocation, I/O Schedules, Cable & Core schedules, etc. Assist with the setup and commissioning of SCADA systems at client sites, troubleshoot field devices and network communication issues, perform preventive and corrective maintenance on SCADA infrastructure and associated hardware. Efficiently design/develop the SCADA/communication systems (e.g., Ignition, Siemens WinCC, GE iFIX, etc) to ensure real-time data acquisition and control for critical infrastructure. Provide remote support for troubleshooting SCADA system and network issues, ensuring minimal downtime and swift resolution of critical incidents. Conduct system upgrades, testing, and validation for new features, components, and patches. Implement cybersecurity measures to safeguard SCADA systems against emerging threats. Collaborate with cross-functional teams to ensure smooth integration and deployment of SCADA systems. Candidate should have experience in tendering, pricing jobs, proposal creation. Candidate should be actively participating in work winning process. Candidate should be capable of technically assessing engineering problems and critically evaluating a range of technical solutions. Unwavering confidence in technically assessing engineering problems and critically evaluating a range of technical solutions will be instrumental in pursuit of engineering excellence. Exemplary communication skills to demonstrate diligence, prioritize tasks effectively, and ensure a thorough understanding of relevant legislation, including CDM and ESQCR. This knowledge will be pivotal in managing Transmission and Distribution network. Collaborate closely with other designers, construction professionals, and engineering teams. Liaise effectively with the Power Systems, Primary and Civil design departments to ensure that all objectives are met and that the best possible design is submitted. Review and provide constructive feedback on the reports and drawings done by Junior & Senior Engineers. Provide technical leadership and mentoring to junior engineers in the design, analysis, and commissioning of protection systems. What we're looking for : Experience: Extensive experience in electrical protection and control system design, Substation Automation and SCADA system typically 12-15 years, with a proven track record of delivering complex projects within the power sector. Technical and Professional knowledge and experience associated with the role. Candidate should have vast experience in crafting Single Line Diagrams, AC & DC Schematic Drawings, Panel General Arrangements, Panel Wiring Diagrams, Switchgear Termination/interconnection drawings, Block Cable Diagrams/Schedules, and performing cable specification/sizing calculations, battery sizing calculations, CT/VT sizing, multicore sizing, Relays CORTEC/specifications. Candidate should have experience in testing & commissioning of P&C, SCADA/Communication/SAS panels. Should be able to Identify potential risks and failures within protection and SCADA systems and propose mitigation strategies. Candidate should have good knowledge & experience working with AutoCAD. Qualifications: Education: Bachelor's degree in electrical engineering (typically 2:1 or above) in Electrical Engineering, Power Systems, or a related field. A master's degree may be preferred for senior roles.Chartered Status (Preferred): Chartered Engineer (CEng) status with a professional body such as the Institution of Engineering and Technology (IET) or the Institution of Electrical Engineers (IEE) is highly desirable.Certifications (Optional): Professional certifications such as NEBOSH for health and safety, or specific training in protection and control system design, may be beneficial.Candidate should have experience working in Substation Automation Syste
We're looking for a Principal Electrical or Mechanical Engineering Team Leader to join our MEP team based in Liverpool, Manchester, or Leeds. Location: Liverpool, Manchester, or Leeds - with opportunity for agile working Hours: 40 hours per week - some flexibility on hours available if desired, just let us know when you speak to us. Salary: Starting from £70,000 per annum Sector: MEP - across a variety of industry sectors We are unable to offer certificates of sponsorship to any candidates in this role. The role involves leading the design and delivery of complex M&E building services projects within a variety of sectors. As a Chartered Engineer and Design Team Leader, you will manage MEP teams, coordinate with multi-disciplinary design teams, ensure technical excellence and compliance, and work closely with project teams and clients for a major main contractor. The position requires strong leadership, significant industry experience, and the ability to deliver safe, efficient, and innovative engineering solutions from concept through construction. Are you A Chartered Engineer and member of CIBSE or IET? A Design Team Leader with strong M&E experience? A Design Team Leader looking to take the next step for a Main Contractor with a secured workload in a variety of industry sectors? Passionate about working for a collaborative, trusted, and delivery-focused organisation? Do you Hold a Degree in Mechanical or Electrical Building Services Design Engineering or related subject? Bring experience of working across both public and private sector projects? Want to work for a highly regarded Main Contractor, recognised as a Top 30 employer on Glassdoor? What will you be responsible for? As a Principal Electrical or Mechanical Engineering Team Leader, you'll be working within the MEP Design team, supporting them in delivering high-quality, coordinated engineering solutions across public and private sector projects. Your day to day will include: Lead the design delivery of high-quality M&E designs across new build, refurbishment, and minor works projects, ensuring outputs meet programme, budget, quality, and safety standards Support the Head of Service in leading and managing the M&E design teams, working closely with project leads to deliver coordinated multi-disciplinary design solutions Manage team performance, utilisation, and development, ensuring capability aligns with workload and business targets Oversee technical delivery including feasibility studies, multi-stage designs, specifications, condition reports, and technical advice Maintain and apply engineering standards, QA procedures, document control, and Health & Safety policies Build and maintain strong client relationships across public and private sector projects, ensuring high levels of customer satisfaction Contribute to business development, including compiling fee proposals, quality submissions, bids, presentations, and winning new work Provide senior technical leadership and ensure integrated design solutions through to completion Promote continuous improvement, innovation, and best practice across the M&E service. Represent Kier within relevant industry sectors, contributing to forums, working groups, and industry engagement Drive standards, innovation, best practice, safety, wellbeing and customer satisfaction Supervise and mentor junior and less experienced members of the team with their journey to chartered status What are we looking for? This role of Principal Electrical or Mechanical Engineering Team Leader is great for you if: Chartered Engineer (CIBSE or IET) with a degree in Mechanical or Electrical Building Services Engineering design or similar subject Proven senior leadership experience managing multi-disciplinary engineering teams Strong communicator able to translate complex technical information clearly Experienced in quality management and design governance Fluent in use of industry related software and calculation methods Able to meet BPSS security requirements Rewards and benefits We're proud to be able to offer our brilliant people a wide variety of benefits that you can tailor to your needs. You can see more information of benefits here. Diversity and inclusion Making Kier a diverse and inclusive place to work is a huge priority for us. We're proud of the steps we've taken so far, but we know we must always do more. Our employees are key in shaping Kier's diversity and inclusion initiatives and our people have made a huge impact on how we work, by using their experiences to shape our policies. You can see our D&I action plan here. As a Disability Confident employer, we will ensure that a fair and proportionate number of disabled applicants that meet the minimum criteria for this role will be offered an interview. Due to the nature of this role, you will also be required to complete a Basic Disclosure and Barring Service Check (applicants with convictions will be treated on a case-by-case basis. We do not discriminate based on an applicant's conviction history or the details of any convictions disclosed to us). Some roles may also be subject to further pre-employment checks. We look forward to seeing your application to . Matched pension scheme up to 7.5%, Life Assurance, Enhanced Family Friendly Policies, Discounts on go-to brands, Free Heath and wellbeing services, Training and development schemes, Electric Vehicle Leasing, Paid volunteering leave.
May 12, 2026
Full time
We're looking for a Principal Electrical or Mechanical Engineering Team Leader to join our MEP team based in Liverpool, Manchester, or Leeds. Location: Liverpool, Manchester, or Leeds - with opportunity for agile working Hours: 40 hours per week - some flexibility on hours available if desired, just let us know when you speak to us. Salary: Starting from £70,000 per annum Sector: MEP - across a variety of industry sectors We are unable to offer certificates of sponsorship to any candidates in this role. The role involves leading the design and delivery of complex M&E building services projects within a variety of sectors. As a Chartered Engineer and Design Team Leader, you will manage MEP teams, coordinate with multi-disciplinary design teams, ensure technical excellence and compliance, and work closely with project teams and clients for a major main contractor. The position requires strong leadership, significant industry experience, and the ability to deliver safe, efficient, and innovative engineering solutions from concept through construction. Are you A Chartered Engineer and member of CIBSE or IET? A Design Team Leader with strong M&E experience? A Design Team Leader looking to take the next step for a Main Contractor with a secured workload in a variety of industry sectors? Passionate about working for a collaborative, trusted, and delivery-focused organisation? Do you Hold a Degree in Mechanical or Electrical Building Services Design Engineering or related subject? Bring experience of working across both public and private sector projects? Want to work for a highly regarded Main Contractor, recognised as a Top 30 employer on Glassdoor? What will you be responsible for? As a Principal Electrical or Mechanical Engineering Team Leader, you'll be working within the MEP Design team, supporting them in delivering high-quality, coordinated engineering solutions across public and private sector projects. Your day to day will include: Lead the design delivery of high-quality M&E designs across new build, refurbishment, and minor works projects, ensuring outputs meet programme, budget, quality, and safety standards Support the Head of Service in leading and managing the M&E design teams, working closely with project leads to deliver coordinated multi-disciplinary design solutions Manage team performance, utilisation, and development, ensuring capability aligns with workload and business targets Oversee technical delivery including feasibility studies, multi-stage designs, specifications, condition reports, and technical advice Maintain and apply engineering standards, QA procedures, document control, and Health & Safety policies Build and maintain strong client relationships across public and private sector projects, ensuring high levels of customer satisfaction Contribute to business development, including compiling fee proposals, quality submissions, bids, presentations, and winning new work Provide senior technical leadership and ensure integrated design solutions through to completion Promote continuous improvement, innovation, and best practice across the M&E service. Represent Kier within relevant industry sectors, contributing to forums, working groups, and industry engagement Drive standards, innovation, best practice, safety, wellbeing and customer satisfaction Supervise and mentor junior and less experienced members of the team with their journey to chartered status What are we looking for? This role of Principal Electrical or Mechanical Engineering Team Leader is great for you if: Chartered Engineer (CIBSE or IET) with a degree in Mechanical or Electrical Building Services Engineering design or similar subject Proven senior leadership experience managing multi-disciplinary engineering teams Strong communicator able to translate complex technical information clearly Experienced in quality management and design governance Fluent in use of industry related software and calculation methods Able to meet BPSS security requirements Rewards and benefits We're proud to be able to offer our brilliant people a wide variety of benefits that you can tailor to your needs. You can see more information of benefits here. Diversity and inclusion Making Kier a diverse and inclusive place to work is a huge priority for us. We're proud of the steps we've taken so far, but we know we must always do more. Our employees are key in shaping Kier's diversity and inclusion initiatives and our people have made a huge impact on how we work, by using their experiences to shape our policies. You can see our D&I action plan here. As a Disability Confident employer, we will ensure that a fair and proportionate number of disabled applicants that meet the minimum criteria for this role will be offered an interview. Due to the nature of this role, you will also be required to complete a Basic Disclosure and Barring Service Check (applicants with convictions will be treated on a case-by-case basis. We do not discriminate based on an applicant's conviction history or the details of any convictions disclosed to us). Some roles may also be subject to further pre-employment checks. We look forward to seeing your application to . Matched pension scheme up to 7.5%, Life Assurance, Enhanced Family Friendly Policies, Discounts on go-to brands, Free Heath and wellbeing services, Training and development schemes, Electric Vehicle Leasing, Paid volunteering leave.
Hours Full Time - 40 hours - Monday to Friday Purpose of Role We are recruiting a Site Works Facilities Manager to join our team at RAF Odiham, a large and complex MOD Defence site. This role is an excellent opportunity for someone currently working as an Assistant Facilities Manager, Supervisor, or Senior Engineer who is ready to take the next step into a full management position. This role will particularly suit someone who has worked previously on the tools (mechanical or electrical), progressed into a supervisory role, and is now looking to develop their career within Facilities Management. We offer strong career progression, access to further qualifications and accreditations, and the support needed to succeed at management level. Job Description As Site Works Facilities Manager, you will play a key role in delivering a seamless, customer-focused facilities service, managing M&E, plumbing and air conditioning service streams on site. You will be responsible for the effective delivery of planned and reactive maintenance, small works, and compliance activity while maintaining excellent client relationships. You will work closely with the Defence Infrastructure Organisation (DIO) and the MOD, attending weekly and monthly meetings and acting as a key site representative. Responsibilities Day-to-day management of client relationships with local intelligent client representatives and MOD end users Managing Planned Preventative Maintenance (PPM) and reactive maintenance delivery Raising and managing works via Maximo (reactive jobs, PPMs, billable works) Managing principal and specialist subcontractors, including performance and compliance Oversight and coordination of small works projects up to £10k Supporting projects delivered through the core programme Ensuring compliance with Health & Safety, safe systems of work, and site procedures Supporting and preparing for site audits Ensuring contract quality and assurance in line with customer guidelines Undertaking general facilities contract management activitiesMonitoring KPIs and performance against SLAs Producing and analysing reports, largely using Microsoft Excel (Maximo data exports) Essential Qualifications/Skills Background in mechanical or electrical engineering, ideally with hands on experience Experience working in facilities or building services within a large, complex site Previously worked in a Supervisor or Assistant Facilities Manager role, or similar Strong working knowledge of Facilities Management Experience using Maximo or similar CAFM systems (or willingness to learn quickly) High level of competence with Microsoft Excel Good understanding of asbestos and Legionella management Able to manage subcontractors and multiple service streams Confident communicator with excellent stakeholder and client-facing skills Comfortable attending and contributing to formal client meetings Experience working to KPIs and SLAs In return for your hard work we offer additional training and development, 26 days holiday (+ bank holidays), generous pension contribution, life assurance and much more. We are committed to working towards a lower carbon society, focusing on sustainable and innovative methods to exceed our partners' goals and add value for all stakeholders. Fairness, Inclusion and Respect (FIR) at VINCI Facilities is about recognising and celebrating each other's differences and what they bring to the team. Harnessing this diversity and applying the experiences, abilities and unique qualities of individuals will enhance our business; therefore, we commit to equity of opportunity and fair treatment of all current and potential employees and encourage job applications from all.
May 12, 2026
Full time
Hours Full Time - 40 hours - Monday to Friday Purpose of Role We are recruiting a Site Works Facilities Manager to join our team at RAF Odiham, a large and complex MOD Defence site. This role is an excellent opportunity for someone currently working as an Assistant Facilities Manager, Supervisor, or Senior Engineer who is ready to take the next step into a full management position. This role will particularly suit someone who has worked previously on the tools (mechanical or electrical), progressed into a supervisory role, and is now looking to develop their career within Facilities Management. We offer strong career progression, access to further qualifications and accreditations, and the support needed to succeed at management level. Job Description As Site Works Facilities Manager, you will play a key role in delivering a seamless, customer-focused facilities service, managing M&E, plumbing and air conditioning service streams on site. You will be responsible for the effective delivery of planned and reactive maintenance, small works, and compliance activity while maintaining excellent client relationships. You will work closely with the Defence Infrastructure Organisation (DIO) and the MOD, attending weekly and monthly meetings and acting as a key site representative. Responsibilities Day-to-day management of client relationships with local intelligent client representatives and MOD end users Managing Planned Preventative Maintenance (PPM) and reactive maintenance delivery Raising and managing works via Maximo (reactive jobs, PPMs, billable works) Managing principal and specialist subcontractors, including performance and compliance Oversight and coordination of small works projects up to £10k Supporting projects delivered through the core programme Ensuring compliance with Health & Safety, safe systems of work, and site procedures Supporting and preparing for site audits Ensuring contract quality and assurance in line with customer guidelines Undertaking general facilities contract management activitiesMonitoring KPIs and performance against SLAs Producing and analysing reports, largely using Microsoft Excel (Maximo data exports) Essential Qualifications/Skills Background in mechanical or electrical engineering, ideally with hands on experience Experience working in facilities or building services within a large, complex site Previously worked in a Supervisor or Assistant Facilities Manager role, or similar Strong working knowledge of Facilities Management Experience using Maximo or similar CAFM systems (or willingness to learn quickly) High level of competence with Microsoft Excel Good understanding of asbestos and Legionella management Able to manage subcontractors and multiple service streams Confident communicator with excellent stakeholder and client-facing skills Comfortable attending and contributing to formal client meetings Experience working to KPIs and SLAs In return for your hard work we offer additional training and development, 26 days holiday (+ bank holidays), generous pension contribution, life assurance and much more. We are committed to working towards a lower carbon society, focusing on sustainable and innovative methods to exceed our partners' goals and add value for all stakeholders. Fairness, Inclusion and Respect (FIR) at VINCI Facilities is about recognising and celebrating each other's differences and what they bring to the team. Harnessing this diversity and applying the experiences, abilities and unique qualities of individuals will enhance our business; therefore, we commit to equity of opportunity and fair treatment of all current and potential employees and encourage job applications from all.
AV Installation Engineer - 32,000/ 37,000 per annum - Hull Principal IT are supporting a leading AV and technology solutions provider delivering high-quality audio visual installations and integrated technology solutions across commercial environments throughout the UK and beyond. Due to continued growth, they are looking to recruit an experienced AV Installation Engineer to join their engineering team. Hull-based with frequent travel to customer sites across the UK and occasional overseas travel. The Role The successful candidate will play a key role in leading and delivering professional AV installation projects across a variety of commercial environments. This is a hands-on position responsible for overseeing all aspects of AV installations including cabling, equipment installation, rack building, system configuration, testing, commissioning, and client handover. The role will also involve mentoring junior engineers, maintaining installation quality standards, and acting as a key point of contact on-site. Key Responsibilities: Lead and carry out 1st and 2nd fix AV installations Install, terminate, and test structured cabling systems Mount and configure AV equipment including displays, audio systems, conferencing systems, and control equipment Perform system testing, fault finding, commissioning, and final handovers Read and interpret technical drawings and schematics Work closely with project managers and technical teams to ensure successful project delivery Supervise and mentor junior engineers and apprentices on-site Ensure all works are completed in line with company quality standards and health & safety requirements Maintain accurate installation documentation and records Act as a professional and customer-focused representative on client sites Support remedial works, servicing, and maintenance activities where required Requirements: Extensive experience within commercial AV installations Strong understanding of AV systems, signal flow, and integration Experience with structured cabling, containment, rack building, and commissioning Excellent troubleshooting and problem-solving skills Strong client-facing and communication skills Site Supervisors Safety Training Scheme - SSSTS certification Full UK driving licence Desirable Skills & Certifications: CTS or CTS-I certification Experience leading installation teams on large-scale AV projects Networking knowledge and AV-over-IP experience Formal electrical, electronic, or network engineering qualifications The Package: If successful our client is offering a salary of 32,000 - 37,000 per annum, favourable holiday allowance, ongoing development and training plus many more. How to Apply : If you are interested in hearing more about this AV installation engineer vacancy or interested in applying for the role please email me at or contact Principal IT Directly on LinkedIn. INDGH
May 12, 2026
Full time
AV Installation Engineer - 32,000/ 37,000 per annum - Hull Principal IT are supporting a leading AV and technology solutions provider delivering high-quality audio visual installations and integrated technology solutions across commercial environments throughout the UK and beyond. Due to continued growth, they are looking to recruit an experienced AV Installation Engineer to join their engineering team. Hull-based with frequent travel to customer sites across the UK and occasional overseas travel. The Role The successful candidate will play a key role in leading and delivering professional AV installation projects across a variety of commercial environments. This is a hands-on position responsible for overseeing all aspects of AV installations including cabling, equipment installation, rack building, system configuration, testing, commissioning, and client handover. The role will also involve mentoring junior engineers, maintaining installation quality standards, and acting as a key point of contact on-site. Key Responsibilities: Lead and carry out 1st and 2nd fix AV installations Install, terminate, and test structured cabling systems Mount and configure AV equipment including displays, audio systems, conferencing systems, and control equipment Perform system testing, fault finding, commissioning, and final handovers Read and interpret technical drawings and schematics Work closely with project managers and technical teams to ensure successful project delivery Supervise and mentor junior engineers and apprentices on-site Ensure all works are completed in line with company quality standards and health & safety requirements Maintain accurate installation documentation and records Act as a professional and customer-focused representative on client sites Support remedial works, servicing, and maintenance activities where required Requirements: Extensive experience within commercial AV installations Strong understanding of AV systems, signal flow, and integration Experience with structured cabling, containment, rack building, and commissioning Excellent troubleshooting and problem-solving skills Strong client-facing and communication skills Site Supervisors Safety Training Scheme - SSSTS certification Full UK driving licence Desirable Skills & Certifications: CTS or CTS-I certification Experience leading installation teams on large-scale AV projects Networking knowledge and AV-over-IP experience Formal electrical, electronic, or network engineering qualifications The Package: If successful our client is offering a salary of 32,000 - 37,000 per annum, favourable holiday allowance, ongoing development and training plus many more. How to Apply : If you are interested in hearing more about this AV installation engineer vacancy or interested in applying for the role please email me at or contact Principal IT Directly on LinkedIn. INDGH
Select how often (in days) to receive an alert: Posting Date: 20 Mar 2026 City: Manchester Location: Manchester, GB, M1 3LD Contract Type: Permanent Division: Power Engineering and Renewables Level of experience: Senior RINA is currently recruiting for a Power Systems Principal Consultant to join its office in Manchester. Why RINA? RINA is a global engineering and consulting company providing technical advisory, assurance, testing, inspection, and certification services across energy and infrastructure markets. With more than 150 years of engineering heritage and a global network of professionals operating in over 70 countries, RINA delivers innovative, safe, and sustainable solutions across the full project lifecycle. Our UK operations trace their origins to 1920 through the British Electrical and Allied Industries Research Association and continue to support complex electrical and infrastructure projects across multiple sectors. The Role This is a hybrid role: you will both manage the established Power Systems Engineering team and be the technical lead for Substation design and construction projects, the focus being electro mechanical engineering, to deliver a wide range of local and international projects for commercial, industrial and utility clients. Technical Responsibilities Act as technical lead for substation design deliverables from 11 kV to 400 kV, including HV/EHV AIS and GIS substations. Develop and maintain project execution plans and ensure alignment with client and internal teams. Support project financial performance by meeting budget targets and adjusting constraints as needed. Produce detailed substation electrical design packages compliant with client, national, and international standards (ENA, BS, IEC, IEEE, ANSI, etc.). Develop design documentation including reports, scheme evaluations, FEED deliverables, and concept stage presentations. Review supplier designs, documentation, FAT plans, and participate in factory/site acceptance testing. Conduct technical quality assurance reviews and provide design approval/sign off for Protection & Control (P&C) and/or Primary design deliverables. Work closely with P&C, Civil/Structural, and other engineering disciplines to support multidisciplinary delivery. Contribute to tender schemes, technical options, and scope development. Preferred Skills and Professional Attributes Chartered Engineer (CEng) status or professional registration as an Incorporated Engineer (IEng) with the Engineering Council. Relevant Health & Safety qualification, such as IOSH Managing Safely, NEBOSH Certificate or Diploma, or NVQ Level 3 (or equivalent) in a Health & Safety-related discipline. Substation safety and access training, such as NSI 30, BESC: AIM, or equivalent authorizations. Formal training in CDM 2015, construction safety, and impressed voltage hazards. Strong understanding of UK Health & Safety legislation applicable to design and construction activities in the electricity supply industry. Good understanding of UK environmental and waste management legislation and associated compliance requirements Must be eligible to work within the UK without sponsorship and willing to commute or relocate to Manchester. In addition to the below, you will become part of our growing global team, you will find yourself working with world class professionals and clients in a global market. 25 days leave (plus bank holidays) Option to buy more holiday Up to 12 days smart working per month (post probation period) Support of Military Reservists - 10 additional paid days Healthcare cover (Family can be added at an additional cost) Life Assurance Professional development to become chartered Pay for professional membership Cycle to work scheme Generous recruitment referral bonus 4 half days paid leave for STEM Ambassadors
May 12, 2026
Full time
Select how often (in days) to receive an alert: Posting Date: 20 Mar 2026 City: Manchester Location: Manchester, GB, M1 3LD Contract Type: Permanent Division: Power Engineering and Renewables Level of experience: Senior RINA is currently recruiting for a Power Systems Principal Consultant to join its office in Manchester. Why RINA? RINA is a global engineering and consulting company providing technical advisory, assurance, testing, inspection, and certification services across energy and infrastructure markets. With more than 150 years of engineering heritage and a global network of professionals operating in over 70 countries, RINA delivers innovative, safe, and sustainable solutions across the full project lifecycle. Our UK operations trace their origins to 1920 through the British Electrical and Allied Industries Research Association and continue to support complex electrical and infrastructure projects across multiple sectors. The Role This is a hybrid role: you will both manage the established Power Systems Engineering team and be the technical lead for Substation design and construction projects, the focus being electro mechanical engineering, to deliver a wide range of local and international projects for commercial, industrial and utility clients. Technical Responsibilities Act as technical lead for substation design deliverables from 11 kV to 400 kV, including HV/EHV AIS and GIS substations. Develop and maintain project execution plans and ensure alignment with client and internal teams. Support project financial performance by meeting budget targets and adjusting constraints as needed. Produce detailed substation electrical design packages compliant with client, national, and international standards (ENA, BS, IEC, IEEE, ANSI, etc.). Develop design documentation including reports, scheme evaluations, FEED deliverables, and concept stage presentations. Review supplier designs, documentation, FAT plans, and participate in factory/site acceptance testing. Conduct technical quality assurance reviews and provide design approval/sign off for Protection & Control (P&C) and/or Primary design deliverables. Work closely with P&C, Civil/Structural, and other engineering disciplines to support multidisciplinary delivery. Contribute to tender schemes, technical options, and scope development. Preferred Skills and Professional Attributes Chartered Engineer (CEng) status or professional registration as an Incorporated Engineer (IEng) with the Engineering Council. Relevant Health & Safety qualification, such as IOSH Managing Safely, NEBOSH Certificate or Diploma, or NVQ Level 3 (or equivalent) in a Health & Safety-related discipline. Substation safety and access training, such as NSI 30, BESC: AIM, or equivalent authorizations. Formal training in CDM 2015, construction safety, and impressed voltage hazards. Strong understanding of UK Health & Safety legislation applicable to design and construction activities in the electricity supply industry. Good understanding of UK environmental and waste management legislation and associated compliance requirements Must be eligible to work within the UK without sponsorship and willing to commute or relocate to Manchester. In addition to the below, you will become part of our growing global team, you will find yourself working with world class professionals and clients in a global market. 25 days leave (plus bank holidays) Option to buy more holiday Up to 12 days smart working per month (post probation period) Support of Military Reservists - 10 additional paid days Healthcare cover (Family can be added at an additional cost) Life Assurance Professional development to become chartered Pay for professional membership Cycle to work scheme Generous recruitment referral bonus 4 half days paid leave for STEM Ambassadors
Job Title: Principal Embedded Software Engineer Location: Bradford Salary: Up to £75k (depending on experience) We re partnering with an established technology engineering organisation seeking a Principal Embedded Software Engineer to lead software architecture, technical delivery, and development strategy across advanced embedded systems. This is a senior, hands-on role combining system architecture, embedded software development, and project ownership. You will guide technical direction and ensure high-quality delivery across the full software lifecycle. A key aspect of this position is applying electrical power systems knowledge and protection function theory within embedded control and communication environments. If you re a senior embedded engineer looking to influence architecture, lead delivery, and work on complex real-time systems, we want to hear from you! About the Role Define and own embedded software architecture and technical direction Lead delivery of complex embedded projects to time and quality targets Develop and maintain robust C/C++ embedded codebases Translate system requirements into structured deliverables and work packages Guide design decisions and review implementation approaches Oversee testing strategy, documentation, and release quality Identify technical risks and implement mitigation strategies Drive Agile processes and continuous improvement practices Collaborate cross-functionally with engineering and project stakeholders About you Degree (or equivalent experience) in Computer Science, Electronics, or similar Advanced C/C++ embedded development experience Strong background in embedded systems design Experience working with real-time operating systems (e.g., FreeRTOS) Solid understanding of multithreading and concurrency Networking knowledge including TCP/IP, UDP and secure communications Experience with embedded Linux or RTOS environments Knowledge of electrical power systems and protection function theory Experience delivering commercial embedded products end-to-end Peripheral interfacing experience (SPI, I2C, memory interfaces) Debugging complex real-time or multithreaded systems Desirable Experience Linux-based embedded platforms or containerised environments Python or scripting languages CI/CD pipelines and DevOps tooling Industrial communication protocols or automation systems Cybersecurity concepts within embedded environments Cloud or enterprise platform integration Wireless communications (WiFi, Bluetooth, Zigbee) Please note, we cannot offer sponsorship for this role. If interested, please send over an updated CV.
May 12, 2026
Full time
Job Title: Principal Embedded Software Engineer Location: Bradford Salary: Up to £75k (depending on experience) We re partnering with an established technology engineering organisation seeking a Principal Embedded Software Engineer to lead software architecture, technical delivery, and development strategy across advanced embedded systems. This is a senior, hands-on role combining system architecture, embedded software development, and project ownership. You will guide technical direction and ensure high-quality delivery across the full software lifecycle. A key aspect of this position is applying electrical power systems knowledge and protection function theory within embedded control and communication environments. If you re a senior embedded engineer looking to influence architecture, lead delivery, and work on complex real-time systems, we want to hear from you! About the Role Define and own embedded software architecture and technical direction Lead delivery of complex embedded projects to time and quality targets Develop and maintain robust C/C++ embedded codebases Translate system requirements into structured deliverables and work packages Guide design decisions and review implementation approaches Oversee testing strategy, documentation, and release quality Identify technical risks and implement mitigation strategies Drive Agile processes and continuous improvement practices Collaborate cross-functionally with engineering and project stakeholders About you Degree (or equivalent experience) in Computer Science, Electronics, or similar Advanced C/C++ embedded development experience Strong background in embedded systems design Experience working with real-time operating systems (e.g., FreeRTOS) Solid understanding of multithreading and concurrency Networking knowledge including TCP/IP, UDP and secure communications Experience with embedded Linux or RTOS environments Knowledge of electrical power systems and protection function theory Experience delivering commercial embedded products end-to-end Peripheral interfacing experience (SPI, I2C, memory interfaces) Debugging complex real-time or multithreaded systems Desirable Experience Linux-based embedded platforms or containerised environments Python or scripting languages CI/CD pipelines and DevOps tooling Industrial communication protocols or automation systems Cybersecurity concepts within embedded environments Cloud or enterprise platform integration Wireless communications (WiFi, Bluetooth, Zigbee) Please note, we cannot offer sponsorship for this role. If interested, please send over an updated CV.
# Principal Testing Rigs & Labs TechnicianMechanical Engineering Job DetailsLocationAbingdon, United KingdomEmployment TypeFull-timeSalary£57kLevelIndividual ContributorPosted# Principal Testing Rigs & Labs Technician Overview of ResponsibilitiesThe salary for this role is £57,117 (inclusive of a Specialist Allowance) . Onsite working is expected for 5 days each week. This role can be based at any of the following sites; Culham, Oxfordshire This role requires employees to complete an online Baseline Personnel Security Standard (BPSS), including The Disclosure & Barring Service (DBS) checks for criminal convictions and possibly a search of open source data. The Role We are recruiting a Principal Testing Rigs & Labs Technician to provide senior level technical leadership within our experimental laboratories.This is a highly practical role, combining deep hands on expertise with day to day operational responsibility for testing rigs, laboratory equipment and experimental activities. You will be the principal technical authority for laboratory operations, ensuring experiments are built, commissioned and run safely, efficiently and to a high technical standard.Working closely with engineers, scientists and programme teams, you will translate experimental designs into robust, real world test setups, mentor technicians and apprentices, and help evolve laboratory capability to meet the needs of novel and emerging technologies. Key Accountabilities: Take day to day ownership of the safe and effective operation of testing rigs and laboratory facilities Act as the technical lead for experimental build, commissioning, operation and decommissioning activities Translate experimental designs into safe, buildable and high quality physical test setups Provide hands on leadership during complex or novel experimental work, troubleshooting issues and reducing technical risk Ensure laboratory assets, tooling and equipment are maintained, organised, calibrated and fit for purpose Lead risk assessment, safe systems of work and incident investigation within laboratory environments Generate and maintain technical procedures, experimental documentation and high quality test data records Support continuous improvement of laboratory processes, workflows, tooling and instrumentation Supervise, mentor and develop technicians and apprentices, setting high standards of professionalism and safety Engage with internal and external stakeholders to clarify requirements, provide expert guidance and manage expectations Deputise for the Testing Rigs and Labs Operations Manager when requiredSalary£57,117 (inclusive of Specialist Allowance) + excellent benefits including outstanding pensionProgrammeDepartmentTechnology DepartmentDisciplineSite LocationType of EmploymentFull-timeReference NumberREF4128H Qualifications Essential Requirements: A relevant technical qualification in a STEM discipline, or equivalent practical experience Extensive hands on experience in laboratory, prototype or experimental test environments Strong mechanical and/or electrical technical capability Experience delivering and operating complex experimental setups (e.g. pressure, vacuum, cryogenic or high voltage systems) Proven ability to take ownership of laboratory operations and experimental delivery Ability to interpret and produce engineering and technical documentation Experience supervising, mentoring or coaching technical staff or apprentices Strong organisational and problem solving skills, with the ability to work autonomously Desirable Requirements: Degree in engineering or a related discipline Knowledge of manufacturing machining (e.g. milling & turning) Experience working in R&D or novel technology environments Familiarity with laboratory compliance frameworks (e.g. COSHH, PUWER, LOLER or similar) Experience integrating instrumentation, control systems or data acquisition into experimental rigs Involvement in laboratory upgrades, facility fit out or new capability introduction Additional Information: This role requires regular hands on work in laboratory and workshop environments Additional InformationA full list of our benefits can be found hereUKAEA's mission is clean energy for all, and we welcome talented people from all backgrounds to help us achieve this goal. We are committed to equality, diversity, and inclusion and strive to ensure fair representation across our workforce. We particularly encourage applications from groups currently underrepresented in STEM, including women and individuals from diverse ethnic backgrounds, while ensuring all appointments are made on merit.UK Atomic Energy Authority is committed to being accessible. Please email if you have any questions or require help or adjustments to compete on a fair basis, for example, changes to the way we interview or share information. Please note that vacancies are generally advertised for 4 weeks but may close earlier if we receive a large number of applications. Get Fusion Job AlertsNew fusion energy jobs delivered to your inbox.LocationAbingdon, United Kingdom
May 12, 2026
Full time
# Principal Testing Rigs & Labs TechnicianMechanical Engineering Job DetailsLocationAbingdon, United KingdomEmployment TypeFull-timeSalary£57kLevelIndividual ContributorPosted# Principal Testing Rigs & Labs Technician Overview of ResponsibilitiesThe salary for this role is £57,117 (inclusive of a Specialist Allowance) . Onsite working is expected for 5 days each week. This role can be based at any of the following sites; Culham, Oxfordshire This role requires employees to complete an online Baseline Personnel Security Standard (BPSS), including The Disclosure & Barring Service (DBS) checks for criminal convictions and possibly a search of open source data. The Role We are recruiting a Principal Testing Rigs & Labs Technician to provide senior level technical leadership within our experimental laboratories.This is a highly practical role, combining deep hands on expertise with day to day operational responsibility for testing rigs, laboratory equipment and experimental activities. You will be the principal technical authority for laboratory operations, ensuring experiments are built, commissioned and run safely, efficiently and to a high technical standard.Working closely with engineers, scientists and programme teams, you will translate experimental designs into robust, real world test setups, mentor technicians and apprentices, and help evolve laboratory capability to meet the needs of novel and emerging technologies. Key Accountabilities: Take day to day ownership of the safe and effective operation of testing rigs and laboratory facilities Act as the technical lead for experimental build, commissioning, operation and decommissioning activities Translate experimental designs into safe, buildable and high quality physical test setups Provide hands on leadership during complex or novel experimental work, troubleshooting issues and reducing technical risk Ensure laboratory assets, tooling and equipment are maintained, organised, calibrated and fit for purpose Lead risk assessment, safe systems of work and incident investigation within laboratory environments Generate and maintain technical procedures, experimental documentation and high quality test data records Support continuous improvement of laboratory processes, workflows, tooling and instrumentation Supervise, mentor and develop technicians and apprentices, setting high standards of professionalism and safety Engage with internal and external stakeholders to clarify requirements, provide expert guidance and manage expectations Deputise for the Testing Rigs and Labs Operations Manager when requiredSalary£57,117 (inclusive of Specialist Allowance) + excellent benefits including outstanding pensionProgrammeDepartmentTechnology DepartmentDisciplineSite LocationType of EmploymentFull-timeReference NumberREF4128H Qualifications Essential Requirements: A relevant technical qualification in a STEM discipline, or equivalent practical experience Extensive hands on experience in laboratory, prototype or experimental test environments Strong mechanical and/or electrical technical capability Experience delivering and operating complex experimental setups (e.g. pressure, vacuum, cryogenic or high voltage systems) Proven ability to take ownership of laboratory operations and experimental delivery Ability to interpret and produce engineering and technical documentation Experience supervising, mentoring or coaching technical staff or apprentices Strong organisational and problem solving skills, with the ability to work autonomously Desirable Requirements: Degree in engineering or a related discipline Knowledge of manufacturing machining (e.g. milling & turning) Experience working in R&D or novel technology environments Familiarity with laboratory compliance frameworks (e.g. COSHH, PUWER, LOLER or similar) Experience integrating instrumentation, control systems or data acquisition into experimental rigs Involvement in laboratory upgrades, facility fit out or new capability introduction Additional Information: This role requires regular hands on work in laboratory and workshop environments Additional InformationA full list of our benefits can be found hereUKAEA's mission is clean energy for all, and we welcome talented people from all backgrounds to help us achieve this goal. We are committed to equality, diversity, and inclusion and strive to ensure fair representation across our workforce. We particularly encourage applications from groups currently underrepresented in STEM, including women and individuals from diverse ethnic backgrounds, while ensuring all appointments are made on merit.UK Atomic Energy Authority is committed to being accessible. Please email if you have any questions or require help or adjustments to compete on a fair basis, for example, changes to the way we interview or share information. Please note that vacancies are generally advertised for 4 weeks but may close earlier if we receive a large number of applications. Get Fusion Job AlertsNew fusion energy jobs delivered to your inbox.LocationAbingdon, United Kingdom
Job Title: Principal Embedded Software Engineer Location: North West & Yorkshire Offices Salary: Up to £75k (depending on experience) We re partnering with an established technology engineering organisation seeking a Principal Embedded Software Engineer to lead software architecture, technical delivery, and development strategy across advanced embedded systems. This is a senior, hands-on role combining system architecture, embedded software development, and project ownership. A key aspect of this position is applying electrical power systems knowledge and protection function theory within embedded control environments. If you re a senior embedded engineer looking to influence architecture, lead delivery, and work on complex real-time systems, we want to hear from you! About the Role Define and own embedded software architecture and technical direction Lead delivery of complex embedded projects to time and quality targets Develop and maintain robust C/C++ embedded codebases Translate system requirements into structured deliverables Guide design decisions and review implementation approaches Oversee testing strategy, documentation, and release quality Identify technical risks and implement mitigation strategies Drive Agile processes and continuous improvement practices Collaborate cross-functionally with engineering and project stakeholders About you Degree (or equivalent experience) in Computer Science, Electronics, or similar Advanced C/C++ embedded development experience Strong background in embedded systems design Experience working with real-time operating systems (e.g., FreeRTOS) Solid understanding of multithreading and concurrency Networking knowledge including TCP/IP, UDP and secure communications Experience with embedded Linux or RTOS environments Knowledge of electrical power systems and protection function theory Experience delivering commercial embedded products end-to-end Peripheral interfacing experience (SPI, I2C, memory interfaces) Debugging complex real-time or multithreaded systems Desirable Experience Linux-based embedded platforms or containerised environments Python or scripting languages CI/CD pipelines and DevOps tooling Industrial communication protocols or automation systems Cybersecurity concepts within embedded environments Cloud or enterprise platform integration Wireless communications (WiFi, Bluetooth, Zigbee) Please note, we cannot offer sponsorship for this role. If interested, please send over an updated CV.
May 11, 2026
Full time
Job Title: Principal Embedded Software Engineer Location: North West & Yorkshire Offices Salary: Up to £75k (depending on experience) We re partnering with an established technology engineering organisation seeking a Principal Embedded Software Engineer to lead software architecture, technical delivery, and development strategy across advanced embedded systems. This is a senior, hands-on role combining system architecture, embedded software development, and project ownership. A key aspect of this position is applying electrical power systems knowledge and protection function theory within embedded control environments. If you re a senior embedded engineer looking to influence architecture, lead delivery, and work on complex real-time systems, we want to hear from you! About the Role Define and own embedded software architecture and technical direction Lead delivery of complex embedded projects to time and quality targets Develop and maintain robust C/C++ embedded codebases Translate system requirements into structured deliverables Guide design decisions and review implementation approaches Oversee testing strategy, documentation, and release quality Identify technical risks and implement mitigation strategies Drive Agile processes and continuous improvement practices Collaborate cross-functionally with engineering and project stakeholders About you Degree (or equivalent experience) in Computer Science, Electronics, or similar Advanced C/C++ embedded development experience Strong background in embedded systems design Experience working with real-time operating systems (e.g., FreeRTOS) Solid understanding of multithreading and concurrency Networking knowledge including TCP/IP, UDP and secure communications Experience with embedded Linux or RTOS environments Knowledge of electrical power systems and protection function theory Experience delivering commercial embedded products end-to-end Peripheral interfacing experience (SPI, I2C, memory interfaces) Debugging complex real-time or multithreaded systems Desirable Experience Linux-based embedded platforms or containerised environments Python or scripting languages CI/CD pipelines and DevOps tooling Industrial communication protocols or automation systems Cybersecurity concepts within embedded environments Cloud or enterprise platform integration Wireless communications (WiFi, Bluetooth, Zigbee) Please note, we cannot offer sponsorship for this role. If interested, please send over an updated CV.
Our client is one of the UK's leading infrastructure contractors, working nationwide on iconic projects and frameworks. Due to continual growth and successfully winning a number of new frameworks and projects, our client is looking to recruit a Senior Estimator from an E&P (Electrification & Plant and Power Supply Upgrades) background to join their established Preconstruction & Bid team. As the successful candidate, you will be crucial to the success of our bid teams and ultimately our projects, as you will be responsible for accurately pricing work from first principles, and working with the preconstruction and wider delivery team to create industry leading bids. You will be from a railway industry background, with experience pricing and previously delivering E&P tenders and work (including: HV Switchgear & Feeder Cable renewals, DC Switchgear renewals, DC & HV Protection Installations, DNO Supply, DNO Supply Installations, Station lighting and rewires, Depot Protection Installations, Earthing Renewals, Conductor Rail Renewals, ETE Installations, Signal Power Supply Installations). Estimator - Electrification and Plant (E&P) roles and responsibilities: Reporting to the Head of Estimating and working alongside the wider pre-construction team, you will have experience in pricing works from 1st principles, possessing a sound knowledge of Electrification & Plant construction techniques, outputs and resources. You will develop and manage cost estimates that align with tender documentation and project / framework requirements. Work with Preconstruction team to produce budgets, cost plans, and design to cost budgets. Be responsible for producing and delivering accurate cost estimates, tender summaries, and costed risk registers. Comfortable presenting cost estimates at internal and external meetings. Able to provide support on other frameworks, projects and tenders as required. Estimator - Electrification and Plant (E&P) requirements: Engineering background and degree qualified in Electrical Engineering or similar qualification and relevant experience. 5+ years' railway experience as an Engineer on site &/or Estimating experience working on Power Supply upgrades, and Electrification and Plant (E&P) Renewals. Previous site, commercial or estimating experience of Network Rail projects. Conversant with different types of Estimating Software and generally strong IT Skills. Experience in pricing works from 1st principles and able to read drawings. Awareness of current construction technologies and methods and how these impact on outputs and costs. Understanding of engineering resources, their costs and outputs and how these translate to the overall project cost. Understanding the significance of project constraints on cost of delivery. Knowledge of risk management procedures and how these impact on cost estimates. Commercial acumen and contractual awareness. Ability to take off quantities from drawings. Ability to liaise with internal and external customers. Estimator - Electrification and Plant (E&P) Benefits: Flexibility to work from home remotely, with 1-2 days every other week in a local office. Work for a leading Principal Contractor within the UK infrastructure market. Excellent training, support and opportunity to progress your career will be provided. Competitive salary and car or car allowance. A competitive rewards package, including a Company Car scheme, Private Healthcare, Pension, and Life Assurance cover. 25 days Annual Leave and your birthday off. Immediate role.
May 11, 2026
Full time
Our client is one of the UK's leading infrastructure contractors, working nationwide on iconic projects and frameworks. Due to continual growth and successfully winning a number of new frameworks and projects, our client is looking to recruit a Senior Estimator from an E&P (Electrification & Plant and Power Supply Upgrades) background to join their established Preconstruction & Bid team. As the successful candidate, you will be crucial to the success of our bid teams and ultimately our projects, as you will be responsible for accurately pricing work from first principles, and working with the preconstruction and wider delivery team to create industry leading bids. You will be from a railway industry background, with experience pricing and previously delivering E&P tenders and work (including: HV Switchgear & Feeder Cable renewals, DC Switchgear renewals, DC & HV Protection Installations, DNO Supply, DNO Supply Installations, Station lighting and rewires, Depot Protection Installations, Earthing Renewals, Conductor Rail Renewals, ETE Installations, Signal Power Supply Installations). Estimator - Electrification and Plant (E&P) roles and responsibilities: Reporting to the Head of Estimating and working alongside the wider pre-construction team, you will have experience in pricing works from 1st principles, possessing a sound knowledge of Electrification & Plant construction techniques, outputs and resources. You will develop and manage cost estimates that align with tender documentation and project / framework requirements. Work with Preconstruction team to produce budgets, cost plans, and design to cost budgets. Be responsible for producing and delivering accurate cost estimates, tender summaries, and costed risk registers. Comfortable presenting cost estimates at internal and external meetings. Able to provide support on other frameworks, projects and tenders as required. Estimator - Electrification and Plant (E&P) requirements: Engineering background and degree qualified in Electrical Engineering or similar qualification and relevant experience. 5+ years' railway experience as an Engineer on site &/or Estimating experience working on Power Supply upgrades, and Electrification and Plant (E&P) Renewals. Previous site, commercial or estimating experience of Network Rail projects. Conversant with different types of Estimating Software and generally strong IT Skills. Experience in pricing works from 1st principles and able to read drawings. Awareness of current construction technologies and methods and how these impact on outputs and costs. Understanding of engineering resources, their costs and outputs and how these translate to the overall project cost. Understanding the significance of project constraints on cost of delivery. Knowledge of risk management procedures and how these impact on cost estimates. Commercial acumen and contractual awareness. Ability to take off quantities from drawings. Ability to liaise with internal and external customers. Estimator - Electrification and Plant (E&P) Benefits: Flexibility to work from home remotely, with 1-2 days every other week in a local office. Work for a leading Principal Contractor within the UK infrastructure market. Excellent training, support and opportunity to progress your career will be provided. Competitive salary and car or car allowance. A competitive rewards package, including a Company Car scheme, Private Healthcare, Pension, and Life Assurance cover. 25 days Annual Leave and your birthday off. Immediate role.
We are ambitious That's why we need people like you to help us. Our Design team is recruiting Are you an experienced Engineer with a passion for leading high-impact projects? If so, keep reading as we're seeking a skilled Design Manager to join our team in either Fareham or Brighton. As a Design Manager, you will take a leading role in managing and coordinating the design process on contractor led waste and water infrastructure projects. Working as part of the project delivery team, you will drive design from tender through to construction and handover, ensuring solutions are safe, buildable, compliant, cost effective and aligned with programme constraints. Projects may include water and wastewater treatment works, pumping stations, pipelines and rising mains, storage assets and complex MEICA installations delivered within live operational environments. Here are some of the things that you'll get involved in Lead and manage the contractor led design process from tender stage through detailed design and construction support. Coordinate multidisciplinary design teams including civil, structural, mechanical, electrical, ICA and process designers. Act as the primary interface between design, construction, commercial and planning teams, ensuring design solutions support safe and efficient delivery. Plan and manage design deliverables, information release schedules and design programmes to support construction sequencing and key milestones. Chair and lead design coordination and design review meetings, ensuring timely decision making and closure of actions. Ensure designs meet contractual requirements, client specifications, regulatory standards and water industry best practice. Drive buildability, operability and maintainability reviews, challenging design solutions where necessary to optimise delivery and whole life performance. Manage and control design development and design change, including assessment of impacts on cost, programme, risk and construction methodology. Coordinate design risk management, ensuring hazards are identified and mitigated through design in collaboration with construction and CDM teams. Work closely with the Principal Designer to ensure health and safety considerations are embedded within the design process and supported in Pre Construction Information. Support resolution of site based technical queries, RFIs and design related construction issues. Attend site regularly to engage with delivery teams and maintain alignment between design intent and construction. Produce progress updates and reports for project leadership and client teams. We would love to hear from you if you can demonstrate Experience delivering waste and water infrastructure projects, ideally within regulated water frameworks. Strong understanding of construction methodologies, temporary works, and sequencing in live operational environments. Experience managing external consultants and in-house designers to deliver coordinated, high-quality design outputs. Knowledge of CDM 2015 and the role design plays in managing construction and operational risk. An engineering qualification in Civil, Structural, Mechanical, Electrical, or Process Engineering (minimum HNC or equivalent NVQ Level 4). Professional membership (e.g. ICE, IMechE, CIHT, or equivalent) is desirable. Strong commercial awareness with the ability to understand design impacts on cost and programme. Excellent communication and stakeholder management skills. High level of IT literacy, including Microsoft Office and design coordination systems. A full UK driving licence. Our Company Every day we work smarter, greener and use our imaginations. Our purpose at Clancy is simple - we make life better for everyone's growing families. We play a vital role in providing fresh drinking water and power to millions of homes and businesses and so much more. We are one of the biggest family owned construction businesses in the UK and we care about our people, our clients and the environment. What Next You apply, and we respond within two weeks (we know how annoying it is not to hear anything back)! If you don't receive feedback within that timescale, please don't be afraid to chase us - one of our values is to do what we say we will do! In addition to helping you reach your career goals, a competitive salary, pension, healthcare and holiday allowance starting at 24-26 days per annum, we also offer perks including Clancy Xtras, our employee benefits programme with discounts for numerous well-known retailers such as Tesco, Sainsbury's, Currys PC World and Vue Cinemas, cycle to work scheme as well as an Employee Assistance Programme. Clancy is an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all our employees. If you require any reasonable adjustments to be made for you to attend an interview, please do let us know and we will be happy to accommodate. We are proud signatories of the Armed Forces Covenant and Disability Confident Committed.
May 11, 2026
Full time
We are ambitious That's why we need people like you to help us. Our Design team is recruiting Are you an experienced Engineer with a passion for leading high-impact projects? If so, keep reading as we're seeking a skilled Design Manager to join our team in either Fareham or Brighton. As a Design Manager, you will take a leading role in managing and coordinating the design process on contractor led waste and water infrastructure projects. Working as part of the project delivery team, you will drive design from tender through to construction and handover, ensuring solutions are safe, buildable, compliant, cost effective and aligned with programme constraints. Projects may include water and wastewater treatment works, pumping stations, pipelines and rising mains, storage assets and complex MEICA installations delivered within live operational environments. Here are some of the things that you'll get involved in Lead and manage the contractor led design process from tender stage through detailed design and construction support. Coordinate multidisciplinary design teams including civil, structural, mechanical, electrical, ICA and process designers. Act as the primary interface between design, construction, commercial and planning teams, ensuring design solutions support safe and efficient delivery. Plan and manage design deliverables, information release schedules and design programmes to support construction sequencing and key milestones. Chair and lead design coordination and design review meetings, ensuring timely decision making and closure of actions. Ensure designs meet contractual requirements, client specifications, regulatory standards and water industry best practice. Drive buildability, operability and maintainability reviews, challenging design solutions where necessary to optimise delivery and whole life performance. Manage and control design development and design change, including assessment of impacts on cost, programme, risk and construction methodology. Coordinate design risk management, ensuring hazards are identified and mitigated through design in collaboration with construction and CDM teams. Work closely with the Principal Designer to ensure health and safety considerations are embedded within the design process and supported in Pre Construction Information. Support resolution of site based technical queries, RFIs and design related construction issues. Attend site regularly to engage with delivery teams and maintain alignment between design intent and construction. Produce progress updates and reports for project leadership and client teams. We would love to hear from you if you can demonstrate Experience delivering waste and water infrastructure projects, ideally within regulated water frameworks. Strong understanding of construction methodologies, temporary works, and sequencing in live operational environments. Experience managing external consultants and in-house designers to deliver coordinated, high-quality design outputs. Knowledge of CDM 2015 and the role design plays in managing construction and operational risk. An engineering qualification in Civil, Structural, Mechanical, Electrical, or Process Engineering (minimum HNC or equivalent NVQ Level 4). Professional membership (e.g. ICE, IMechE, CIHT, or equivalent) is desirable. Strong commercial awareness with the ability to understand design impacts on cost and programme. Excellent communication and stakeholder management skills. High level of IT literacy, including Microsoft Office and design coordination systems. A full UK driving licence. Our Company Every day we work smarter, greener and use our imaginations. Our purpose at Clancy is simple - we make life better for everyone's growing families. We play a vital role in providing fresh drinking water and power to millions of homes and businesses and so much more. We are one of the biggest family owned construction businesses in the UK and we care about our people, our clients and the environment. What Next You apply, and we respond within two weeks (we know how annoying it is not to hear anything back)! If you don't receive feedback within that timescale, please don't be afraid to chase us - one of our values is to do what we say we will do! In addition to helping you reach your career goals, a competitive salary, pension, healthcare and holiday allowance starting at 24-26 days per annum, we also offer perks including Clancy Xtras, our employee benefits programme with discounts for numerous well-known retailers such as Tesco, Sainsbury's, Currys PC World and Vue Cinemas, cycle to work scheme as well as an Employee Assistance Programme. Clancy is an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all our employees. If you require any reasonable adjustments to be made for you to attend an interview, please do let us know and we will be happy to accommodate. We are proud signatories of the Armed Forces Covenant and Disability Confident Committed.
Job Title: Senior Engineer - Metrology (Instrumentation Calibration) Location: Barrow-in-Furness - Primarily on site with potentially 1 day per week WFH. We offer a range of hybrid and flexible working arrangements - please speak to your recruiter about the options for this particular role Salary: Circa £48,000 Who we are: Join BAE Systems and you'll be part of something bigger. As a valued member of our global colleague network, you'll bring your unique skills and perspectives to help pioneer progress and protect what matters most. You'll be trusted to play your part in delivering the advanced, technology-led defence, aerospace and security solutions of tomorrow, shaping a safer future, for all of us. From the depths of the ocean, to the far reaches of space, there's no limit to where a career at BAE Systems could take you. Job Description: As a Senior Engineer - Metrology (Instrumentation), you will support senior and principal engineers, as well as external specialists, in the development of testing regimes and verification activities for electronic systems. The role involves working closely with customers to develop and clarify requirements, designing and delivering instrumentation solutions, and carrying out testing activities. You will perform data analysis and produce technical reports that support system verification, qualification, and lifecycle management . Core duties: Engage with internal customers to capture and deliver clear requirements Install bespoke instrumentation across site to meet customer needs Fault find and maintain legacy equipment Work with supply chain and suppliers to deliver fit for purpose equipment Support factory acceptance tests and submarine trials, analysing results as required Undertake peer review, verification, and assurance activities Produce lifecycle management (LCM) documentation and safety/qualification evidence Coach and mentor early career colleagues Essential Skills: Minimum HNC or Degree in Electronic or Electrical Engineering with good knowledge of Electrical and Electronic Principles Proficient in trouble shooting and repairing Complex instrumentation Systems Experience & working knowledge of project lifecycle Ability to read and Interpret technical/schematic drawings Demonstrable experience of defining and conducting test procedures The Instrumentation Development Services (IDS) team: You will join a team of around 20 specialists supporting the Dreadnought programme. The team develops customer requirements, delivers bespoke instrumentation and works closely with Radiation Protection and Shielding across the Barrow-in-Furness site. We offer relocation support packages across all Submarines roles, subject to meeting eligibility criteria. Why BAE Systems? Here you'll build a career with purpose and limitless possibilities. With lifelong learning and meaningful work, this is a place where you can grow your career with confidence and be empowered to be your best. You'll be recognised for your contribution and enjoy rewards tailored to what's most important to you and your family, support for your financial and personal wellbeing, as well as a balanced lifestyle. In an environment embracing sustainable ways of working and with a strong sense of shared purpose, our supportive culture is a place you can feel you belong and proud of the difference you make. A place where everyone can thrive: We're committed to building an inclusive workplace where everyone feels valued and supported. We know that a diversity of backgrounds, perspectives and experiences strengthens our teams and is vital to the work we do. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date: 15th May 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role. Therefore, if you are interested, please submit your application as early as possible.
May 11, 2026
Full time
Job Title: Senior Engineer - Metrology (Instrumentation Calibration) Location: Barrow-in-Furness - Primarily on site with potentially 1 day per week WFH. We offer a range of hybrid and flexible working arrangements - please speak to your recruiter about the options for this particular role Salary: Circa £48,000 Who we are: Join BAE Systems and you'll be part of something bigger. As a valued member of our global colleague network, you'll bring your unique skills and perspectives to help pioneer progress and protect what matters most. You'll be trusted to play your part in delivering the advanced, technology-led defence, aerospace and security solutions of tomorrow, shaping a safer future, for all of us. From the depths of the ocean, to the far reaches of space, there's no limit to where a career at BAE Systems could take you. Job Description: As a Senior Engineer - Metrology (Instrumentation), you will support senior and principal engineers, as well as external specialists, in the development of testing regimes and verification activities for electronic systems. The role involves working closely with customers to develop and clarify requirements, designing and delivering instrumentation solutions, and carrying out testing activities. You will perform data analysis and produce technical reports that support system verification, qualification, and lifecycle management . Core duties: Engage with internal customers to capture and deliver clear requirements Install bespoke instrumentation across site to meet customer needs Fault find and maintain legacy equipment Work with supply chain and suppliers to deliver fit for purpose equipment Support factory acceptance tests and submarine trials, analysing results as required Undertake peer review, verification, and assurance activities Produce lifecycle management (LCM) documentation and safety/qualification evidence Coach and mentor early career colleagues Essential Skills: Minimum HNC or Degree in Electronic or Electrical Engineering with good knowledge of Electrical and Electronic Principles Proficient in trouble shooting and repairing Complex instrumentation Systems Experience & working knowledge of project lifecycle Ability to read and Interpret technical/schematic drawings Demonstrable experience of defining and conducting test procedures The Instrumentation Development Services (IDS) team: You will join a team of around 20 specialists supporting the Dreadnought programme. The team develops customer requirements, delivers bespoke instrumentation and works closely with Radiation Protection and Shielding across the Barrow-in-Furness site. We offer relocation support packages across all Submarines roles, subject to meeting eligibility criteria. Why BAE Systems? Here you'll build a career with purpose and limitless possibilities. With lifelong learning and meaningful work, this is a place where you can grow your career with confidence and be empowered to be your best. You'll be recognised for your contribution and enjoy rewards tailored to what's most important to you and your family, support for your financial and personal wellbeing, as well as a balanced lifestyle. In an environment embracing sustainable ways of working and with a strong sense of shared purpose, our supportive culture is a place you can feel you belong and proud of the difference you make. A place where everyone can thrive: We're committed to building an inclusive workplace where everyone feels valued and supported. We know that a diversity of backgrounds, perspectives and experiences strengthens our teams and is vital to the work we do. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date: 15th May 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role. Therefore, if you are interested, please submit your application as early as possible.
Principal Systems Engineer Modelling & Simulation Motorsport & High-Performance Vehicles We are working with a leading engineering organisation at the forefront of motorsport and high-performance vehicle technology to appoint a Principal Systems Engineer Modelling & Simulation. This role sits at the highest level of technical contribution (equivalent to Staff Engineer level globally) and offers the opportunity to define modelling strategy, lead complex system development, and directly influence next-generation electrohydraulic technologies. The Opportunity This is a senior, hands-on technical leadership role focused on model-based design, simulation capability, and system performance. You ll work across the full lifecycle from concept development and requirements definition through to integration, validation, and customer delivery. You will play a key role in both new product development and strategic growth initiatives, acting as a technical authority internally and with customers. Key Responsibilities Lead the development and deployment of advanced modelling and simulation tools, supporting system design, customer prototyping, and strategic growth initiatives Own and evolve simulation capability, maintaining, updating, and validating modelling tools to ensure accuracy and scalability Conduct detailed performance analysis using MATLAB/Simulink, driving engineering decisions through model-based insights Develop simulation and sizing tools to support system architecture and component selection Act as a technical lead in customer engagements, leveraging model-based design to define and deliver engineering solutions Translate customer requirements into robust engineering specifications through: Functional analysis Trade studies Requirements allocation and interface definition Lead system and subsystem integration and testing, including anomaly investigation and root cause analysis Define and drive Verification & Validation (V&V) strategies across product and system development Conduct failure analysis, implementing effective corrective actions to improve reliability and performance What We re Looking For Strong expertise in hydraulic systems and classical control theory Advanced capability in MATLAB/Simulink, including performance modelling and analysis Proven experience developing simulation and/or sizing tools Demonstrated ability to build and deploy model-based engineering environments Experience leading system integration, V&V, and customer-facing technical activities Background & Experience Degree in Electrical, Mechanical, Aerospace, or Systems Engineering (Master s preferred) 10+ years experience in a progressive engineering environment Proven experience in technical leadership and cross-functional engineering delivery Working knowledge of CFD, FEA, or magnetic analysis is advantageous Familiarity with servovalve design is beneficial Why This Role? Influence cutting-edge motorsport and high-performance vehicle technologies Own and shape modelling and simulation strategy Work at a level of true technical authority without moving into management Combine deep technical work with customer impact and innovation
May 11, 2026
Full time
Principal Systems Engineer Modelling & Simulation Motorsport & High-Performance Vehicles We are working with a leading engineering organisation at the forefront of motorsport and high-performance vehicle technology to appoint a Principal Systems Engineer Modelling & Simulation. This role sits at the highest level of technical contribution (equivalent to Staff Engineer level globally) and offers the opportunity to define modelling strategy, lead complex system development, and directly influence next-generation electrohydraulic technologies. The Opportunity This is a senior, hands-on technical leadership role focused on model-based design, simulation capability, and system performance. You ll work across the full lifecycle from concept development and requirements definition through to integration, validation, and customer delivery. You will play a key role in both new product development and strategic growth initiatives, acting as a technical authority internally and with customers. Key Responsibilities Lead the development and deployment of advanced modelling and simulation tools, supporting system design, customer prototyping, and strategic growth initiatives Own and evolve simulation capability, maintaining, updating, and validating modelling tools to ensure accuracy and scalability Conduct detailed performance analysis using MATLAB/Simulink, driving engineering decisions through model-based insights Develop simulation and sizing tools to support system architecture and component selection Act as a technical lead in customer engagements, leveraging model-based design to define and deliver engineering solutions Translate customer requirements into robust engineering specifications through: Functional analysis Trade studies Requirements allocation and interface definition Lead system and subsystem integration and testing, including anomaly investigation and root cause analysis Define and drive Verification & Validation (V&V) strategies across product and system development Conduct failure analysis, implementing effective corrective actions to improve reliability and performance What We re Looking For Strong expertise in hydraulic systems and classical control theory Advanced capability in MATLAB/Simulink, including performance modelling and analysis Proven experience developing simulation and/or sizing tools Demonstrated ability to build and deploy model-based engineering environments Experience leading system integration, V&V, and customer-facing technical activities Background & Experience Degree in Electrical, Mechanical, Aerospace, or Systems Engineering (Master s preferred) 10+ years experience in a progressive engineering environment Proven experience in technical leadership and cross-functional engineering delivery Working knowledge of CFD, FEA, or magnetic analysis is advantageous Familiarity with servovalve design is beneficial Why This Role? Influence cutting-edge motorsport and high-performance vehicle technologies Own and shape modelling and simulation strategy Work at a level of true technical authority without moving into management Combine deep technical work with customer impact and innovation
Job Title: Principal Engineer - Electrical Engineering (HV) Location: Barrow - Hybrid - 3 days per week on site (Dependent on business needs) We offer a range of hybrid and flexible working arrangements - please speak to your recruiter about the options for this particular role Salary: £45,628 - £61,500 (Commensurate with skills and experience) Who we are: Join BAE Systems and you'll be part of something bigger. As a valued member of our global colleague network, you'll bring your unique skills and perspectives to help pioneer progress and protect what matters most. You'll be trusted to play your part in delivering the advanced, technology-led defence, aerospace and security solutions of tomorrow, shaping a safer future, for all of us. From the depths of the ocean, to the far reaches of space, there's no limit to where a career at BAE Systems could take you. Job Description: As a Principal Engineer -Electrical Engineering (HV) you will be part of the Site Specialist Engineering Electrical team providing specialist support to the business with respect to setting electrical standards and requirements for equipment/systems/facilities in accordance with legislation/processes. You will be Point of contact for High Voltage issues regarding standards for site electrical systems and support a wide range of electrical disciplines, with opportunities to learn and develop in LV, HV, C&I and Communications, each day varies with the chance to problem solve and drive innovative solutions from your experiences. Core duties: You'll define site standards, processes and technical requirements in terms of electrical engineering for equipment, systems and facilities You'll conduct reviews and assessments of design proposals to ensure that the equipment/facilities are designed, constructed, commissioned, operated and maintained in accordance with the appropriate processes and standards You'll produce technical documentation and reports You'll have input into problem solving, engineering issues relating to the subject matter You'll be point of contact for High Voltage issues regarding standards for site electrical systems You will chair and lead improvements (policy, equipment, capabilities) with site risk cells set up to ensure compliance with relevant regulations Essential Skills: Electrical engineer with demonstratable High Voltage engineering experience of 11kV systems Demonstrable experience of working in an industrial engineering environment with familiarity of commercial standards Degree qualified in electrical engineering or equivalent (e.g. HND with relevant experience) Registered with an Engineering professional institute and have the ability to achieve chartered status Demonstrable experience of leadership within an engineering environment and familiarity with commercial British standards The Site Specialist Engineering (SSE) team The Site Specialist Engineering Electrical team provide specialist support to the business with respect to setting electrical standards and requirements for equipment/systems/facilities in accordance with legislation/processes. The team support a wide range of electrical disciplines and there are opportunities to learn and develop in LV, HV, C&I and Communications, each day varies with the chance to problem solve and drive innovative solutions from your experiences. As the Barrow site infrastructure grows you can play a part in the development of new facilities and help drive improvements in aging and existing systems, structures and components. We offer relocation support packages across all Submarines roles, subject to meeting eligibility criteria. Why BAE Systems? Here you'll build a career with purpose and limitless possibilities. With lifelong learning and meaningful work, this is a place where you can grow your career with confidence and be empowered to be your best. You'll be recognised for your contribution and enjoy rewards tailored to what's most important to you and your family, support for your financial and personal wellbeing, as well as a balanced lifestyle. In an environment embracing sustainable ways of working and with a strong sense of shared purpose, our supportive culture is a place you can feel you belong and proud of the difference you make. A place where everyone can thrive: We're committed to building an inclusive workplace where everyone feels valued and supported. We know that a diversity of backgrounds, perspectives and experiences strengthens our teams and is vital to the work we do. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date: 24th May 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible.
May 11, 2026
Full time
Job Title: Principal Engineer - Electrical Engineering (HV) Location: Barrow - Hybrid - 3 days per week on site (Dependent on business needs) We offer a range of hybrid and flexible working arrangements - please speak to your recruiter about the options for this particular role Salary: £45,628 - £61,500 (Commensurate with skills and experience) Who we are: Join BAE Systems and you'll be part of something bigger. As a valued member of our global colleague network, you'll bring your unique skills and perspectives to help pioneer progress and protect what matters most. You'll be trusted to play your part in delivering the advanced, technology-led defence, aerospace and security solutions of tomorrow, shaping a safer future, for all of us. From the depths of the ocean, to the far reaches of space, there's no limit to where a career at BAE Systems could take you. Job Description: As a Principal Engineer -Electrical Engineering (HV) you will be part of the Site Specialist Engineering Electrical team providing specialist support to the business with respect to setting electrical standards and requirements for equipment/systems/facilities in accordance with legislation/processes. You will be Point of contact for High Voltage issues regarding standards for site electrical systems and support a wide range of electrical disciplines, with opportunities to learn and develop in LV, HV, C&I and Communications, each day varies with the chance to problem solve and drive innovative solutions from your experiences. Core duties: You'll define site standards, processes and technical requirements in terms of electrical engineering for equipment, systems and facilities You'll conduct reviews and assessments of design proposals to ensure that the equipment/facilities are designed, constructed, commissioned, operated and maintained in accordance with the appropriate processes and standards You'll produce technical documentation and reports You'll have input into problem solving, engineering issues relating to the subject matter You'll be point of contact for High Voltage issues regarding standards for site electrical systems You will chair and lead improvements (policy, equipment, capabilities) with site risk cells set up to ensure compliance with relevant regulations Essential Skills: Electrical engineer with demonstratable High Voltage engineering experience of 11kV systems Demonstrable experience of working in an industrial engineering environment with familiarity of commercial standards Degree qualified in electrical engineering or equivalent (e.g. HND with relevant experience) Registered with an Engineering professional institute and have the ability to achieve chartered status Demonstrable experience of leadership within an engineering environment and familiarity with commercial British standards The Site Specialist Engineering (SSE) team The Site Specialist Engineering Electrical team provide specialist support to the business with respect to setting electrical standards and requirements for equipment/systems/facilities in accordance with legislation/processes. The team support a wide range of electrical disciplines and there are opportunities to learn and develop in LV, HV, C&I and Communications, each day varies with the chance to problem solve and drive innovative solutions from your experiences. As the Barrow site infrastructure grows you can play a part in the development of new facilities and help drive improvements in aging and existing systems, structures and components. We offer relocation support packages across all Submarines roles, subject to meeting eligibility criteria. Why BAE Systems? Here you'll build a career with purpose and limitless possibilities. With lifelong learning and meaningful work, this is a place where you can grow your career with confidence and be empowered to be your best. You'll be recognised for your contribution and enjoy rewards tailored to what's most important to you and your family, support for your financial and personal wellbeing, as well as a balanced lifestyle. In an environment embracing sustainable ways of working and with a strong sense of shared purpose, our supportive culture is a place you can feel you belong and proud of the difference you make. A place where everyone can thrive: We're committed to building an inclusive workplace where everyone feels valued and supported. We know that a diversity of backgrounds, perspectives and experiences strengthens our teams and is vital to the work we do. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date: 24th May 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible.
Job Title: Senior Engineer - Metrology (Instrumentation Calibration) Location: Barrow-in-Furness - Primarily on site with potentially 1 day per week WFH. We offer a range of hybrid and flexible working arrangements - please speak to your recruiter about the options for this particular role Salary: Circa £48,000 Who we are: Join BAE Systems and you'll be part of something bigger. As a valued member of our global colleague network, you'll bring your unique skills and perspectives to help pioneer progress and protect what matters most. You'll be trusted to play your part in delivering the advanced, technology-led defence, aerospace and security solutions of tomorrow, shaping a safer future, for all of us. From the depths of the ocean, to the far reaches of space, there's no limit to where a career at BAE Systems could take you. Job Description: As a Senior Engineer - Metrology (Instrumentation), you will support senior and principal engineers, as well as external specialists, in the development of testing regimes and verification activities for electronic systems. The role involves working closely with customers to develop and clarify requirements, designing and delivering instrumentation solutions, and carrying out testing activities. You will perform data analysis and produce technical reports that support system verification, qualification, and lifecycle management . Core duties: Engage with internal customers to capture and deliver clear requirements Install bespoke instrumentation across site to meet customer needs Fault find and maintain legacy equipment Work with supply chain and suppliers to deliver fit for purpose equipment Support factory acceptance tests and submarine trials, analysing results as required Undertake peer review, verification, and assurance activities Produce lifecycle management (LCM) documentation and safety/qualification evidence Coach and mentor early career colleagues Essential Skills: Minimum HNC or Degree in Electronic or Electrical Engineering with good knowledge of Electrical and Electronic Principles Proficient in trouble shooting and repairing Complex instrumentation Systems Experience & working knowledge of project lifecycle Ability to read and Interpret technical/schematic drawings Demonstrable experience of defining and conducting test procedures The Instrumentation Development Services (IDS) team: You will join a team of around 20 specialists supporting the Dreadnought programme. The team develops customer requirements, delivers bespoke instrumentation and works closely with Radiation Protection and Shielding across the Barrow-in-Furness site. We offer relocation support packages across all Submarines roles, subject to meeting eligibility criteria. Why BAE Systems? Here you'll build a career with purpose and limitless possibilities. With lifelong learning and meaningful work, this is a place where you can grow your career with confidence and be empowered to be your best. You'll be recognised for your contribution and enjoy rewards tailored to what's most important to you and your family, support for your financial and personal wellbeing, as well as a balanced lifestyle. In an environment embracing sustainable ways of working and with a strong sense of shared purpose, our supportive culture is a place you can feel you belong and proud of the difference you make. A place where everyone can thrive: We're committed to building an inclusive workplace where everyone feels valued and supported. We know that a diversity of backgrounds, perspectives and experiences strengthens our teams and is vital to the work we do. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date: 15th May 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role. Therefore, if you are interested, please submit your application as early as possible.
May 11, 2026
Full time
Job Title: Senior Engineer - Metrology (Instrumentation Calibration) Location: Barrow-in-Furness - Primarily on site with potentially 1 day per week WFH. We offer a range of hybrid and flexible working arrangements - please speak to your recruiter about the options for this particular role Salary: Circa £48,000 Who we are: Join BAE Systems and you'll be part of something bigger. As a valued member of our global colleague network, you'll bring your unique skills and perspectives to help pioneer progress and protect what matters most. You'll be trusted to play your part in delivering the advanced, technology-led defence, aerospace and security solutions of tomorrow, shaping a safer future, for all of us. From the depths of the ocean, to the far reaches of space, there's no limit to where a career at BAE Systems could take you. Job Description: As a Senior Engineer - Metrology (Instrumentation), you will support senior and principal engineers, as well as external specialists, in the development of testing regimes and verification activities for electronic systems. The role involves working closely with customers to develop and clarify requirements, designing and delivering instrumentation solutions, and carrying out testing activities. You will perform data analysis and produce technical reports that support system verification, qualification, and lifecycle management . Core duties: Engage with internal customers to capture and deliver clear requirements Install bespoke instrumentation across site to meet customer needs Fault find and maintain legacy equipment Work with supply chain and suppliers to deliver fit for purpose equipment Support factory acceptance tests and submarine trials, analysing results as required Undertake peer review, verification, and assurance activities Produce lifecycle management (LCM) documentation and safety/qualification evidence Coach and mentor early career colleagues Essential Skills: Minimum HNC or Degree in Electronic or Electrical Engineering with good knowledge of Electrical and Electronic Principles Proficient in trouble shooting and repairing Complex instrumentation Systems Experience & working knowledge of project lifecycle Ability to read and Interpret technical/schematic drawings Demonstrable experience of defining and conducting test procedures The Instrumentation Development Services (IDS) team: You will join a team of around 20 specialists supporting the Dreadnought programme. The team develops customer requirements, delivers bespoke instrumentation and works closely with Radiation Protection and Shielding across the Barrow-in-Furness site. We offer relocation support packages across all Submarines roles, subject to meeting eligibility criteria. Why BAE Systems? Here you'll build a career with purpose and limitless possibilities. With lifelong learning and meaningful work, this is a place where you can grow your career with confidence and be empowered to be your best. You'll be recognised for your contribution and enjoy rewards tailored to what's most important to you and your family, support for your financial and personal wellbeing, as well as a balanced lifestyle. In an environment embracing sustainable ways of working and with a strong sense of shared purpose, our supportive culture is a place you can feel you belong and proud of the difference you make. A place where everyone can thrive: We're committed to building an inclusive workplace where everyone feels valued and supported. We know that a diversity of backgrounds, perspectives and experiences strengthens our teams and is vital to the work we do. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date: 15th May 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role. Therefore, if you are interested, please submit your application as early as possible.
Senior Substation Primary (HV Plant) Design Engineer Epsom, Birmingham, Leeds or Glasgow 12 months (Inside IR35) C-level vetting required The Opportunity We are seeking an experienced Senior Substation Primary (HV Plant) Design Engineer to support the delivery of major Transmission & Distribution projects across the UK energy sector. This is an exciting opportunity to work on high-profile infrastructure programmes that contribute directly to the UK s Net Zero ambitions. You will join a collaborative Power & Energy team delivering FEED and Detailed Design solutions for leading clients including National Grid, SSEN Transmission, and other UK and international utilities. The role offers the opportunity to work across multi-disciplinary engineering projects while developing your technical expertise within a supportive consultancy environment. Key Responsibilities Operate in a senior role within one of the Electrical Engineering teams based in Epsom, Birmingham, Leeds, or Glasgow Deliver technical leadership across FEED and Detailed Design workstreams Build strong and trusted relationships with clients and project stakeholders Interface directly with clients to understand requirements and develop successful project solutions Support the delivery of projects for National Grid, SSEN Transmission, and other T&D clients Ensure quality assurance across engineering studies, detailed designs, and tender submissions Support resource planning and mentoring within project teams Review and coordinate HV plant design activities including: HV layouts and elevations Maintenance access drawings Earthing design and reports Mechanical interlocking HV busbar calculations Technical specifications for HV plant equipment Act as Principal Designer Representative when required Coordinate with internal engineering teams, subcontractors, and suppliers Manage tender packages and contribute to technical submissions Lead and participate in Design Review and Hazard Review meetings Attend client and project site visits as required Support business development activities and identify client opportunities Experience & Qualifications Essential Experience in Electrical Engineering with a focus on HV Primary Plant / Substation Design Experience supporting FEED and Detailed Design projects Strong understanding of transmission and distribution systems Desirable Experience delivering projects up to 400kV Previous experience working with National Grid, SSEN, or other utility clients
May 11, 2026
Contractor
Senior Substation Primary (HV Plant) Design Engineer Epsom, Birmingham, Leeds or Glasgow 12 months (Inside IR35) C-level vetting required The Opportunity We are seeking an experienced Senior Substation Primary (HV Plant) Design Engineer to support the delivery of major Transmission & Distribution projects across the UK energy sector. This is an exciting opportunity to work on high-profile infrastructure programmes that contribute directly to the UK s Net Zero ambitions. You will join a collaborative Power & Energy team delivering FEED and Detailed Design solutions for leading clients including National Grid, SSEN Transmission, and other UK and international utilities. The role offers the opportunity to work across multi-disciplinary engineering projects while developing your technical expertise within a supportive consultancy environment. Key Responsibilities Operate in a senior role within one of the Electrical Engineering teams based in Epsom, Birmingham, Leeds, or Glasgow Deliver technical leadership across FEED and Detailed Design workstreams Build strong and trusted relationships with clients and project stakeholders Interface directly with clients to understand requirements and develop successful project solutions Support the delivery of projects for National Grid, SSEN Transmission, and other T&D clients Ensure quality assurance across engineering studies, detailed designs, and tender submissions Support resource planning and mentoring within project teams Review and coordinate HV plant design activities including: HV layouts and elevations Maintenance access drawings Earthing design and reports Mechanical interlocking HV busbar calculations Technical specifications for HV plant equipment Act as Principal Designer Representative when required Coordinate with internal engineering teams, subcontractors, and suppliers Manage tender packages and contribute to technical submissions Lead and participate in Design Review and Hazard Review meetings Attend client and project site visits as required Support business development activities and identify client opportunities Experience & Qualifications Essential Experience in Electrical Engineering with a focus on HV Primary Plant / Substation Design Experience supporting FEED and Detailed Design projects Strong understanding of transmission and distribution systems Desirable Experience delivering projects up to 400kV Previous experience working with National Grid, SSEN, or other utility clients
Job Title: Principal Engineer - Electrical Engineering (Power) Location: : Barrow-in-Furness / Filton - (Hybrid -2 days a fortnight (Barrow), or 1 day a week(Filton) dependent on business needs. We offer a range of hybrid and flexible working arrangements - please speak to your recruiter about the options for this particular role Salary: £47,241+ (Commensurate with skills and experience) Who we are: Join BAE Systems and you'll be part of something bigger. As a valued member of our global colleague network, you'll bring your unique skills and perspectives to help pioneer progress and protect what matters most. You'll be trusted to play your part in delivering the advanced, technology-led defence, aerospace and security solutions of tomorrow, shaping a safer future, for all of us. From the depths of the ocean, to the far reaches of space, there's no limit to where a career at BAE Systems could take you. Job Description: As part of the Electrical Engineering Power Team, you will be leading the development of design documents, reviewing supplier documentation, developing technical requirements and undertaking assessment of design compliance to support the development of our electrical systems. Core duties: You'll be developing design solutions to agreed time, cost and quality in accordance with project or business milestones You'll develop and manage requirements and acceptance criteria specific to a system or product and/or across a system of systems, platform or programme You'll understand the contractual and performance requirements for various systems, and support the definition and associated acceptance criteria and events through design, build, integration, installation and commissioning activities You'll produce documentation required to support the design review process, including diagrams; technical specifications; supporting calculations; design evidence and justifications You'll provide technical support to integrated performance and acceptance activities, including acceptance of equipment from suppliers through to system acceptance by the customer and support build activities, defect resolution and change management You'll support the development of estimates for the scope of work and resources required to deliver it to support bids, proposal development and project planning activities for various systems Essential Skills: BEng (Hons) / MEng or equivalent and CEng (or be able to satisfy requirements for CEng) Demonstrable experience of engineering lifecycle with knowledge of AC and DC electrical power systems Understanding of at least one of the following areas: Power system modelling; generators; switchgear; protection; power electronics In depth understanding of Power System Architecture, Power Generation and Distribution, Protection and Co-ordination or Power Earth Fault Monitoring Significant The Electrical Engineering Power Team: The Electrical Engineering Power Team are working on the UK's next-generation SSN design that incorporates technology from the UK, Australia and the United States. The team are responsible for defining the system elements required to feed into the submarine design and build process, including design documentation, spatial modelling and build outputs. We offer relocation support packages across all Submarines roles, subject to meeting eligibility criteria. Why BAE Systems? Here you'll build a career with purpose and limitless possibilities. With lifelong learning and meaningful work, this is a place where you can grow your career with confidence and be empowered to be your best. You'll be recognised for your contribution and enjoy rewards tailored to what's most important to you and your family, support for your financial and personal wellbeing, as well as a balanced lifestyle. In an environment embracing sustainable ways of working and with a strong sense of shared purpose, our supportive culture is a place you can feel you belong and proud of the difference you make. A place where everyone can thrive: We're committed to building an inclusive workplace where everyone feels valued and supported. We know that a diversity of backgrounds, perspectives and experiences strengthens our teams and is vital to the work we do. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date: 28th June 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible.
May 10, 2026
Full time
Job Title: Principal Engineer - Electrical Engineering (Power) Location: : Barrow-in-Furness / Filton - (Hybrid -2 days a fortnight (Barrow), or 1 day a week(Filton) dependent on business needs. We offer a range of hybrid and flexible working arrangements - please speak to your recruiter about the options for this particular role Salary: £47,241+ (Commensurate with skills and experience) Who we are: Join BAE Systems and you'll be part of something bigger. As a valued member of our global colleague network, you'll bring your unique skills and perspectives to help pioneer progress and protect what matters most. You'll be trusted to play your part in delivering the advanced, technology-led defence, aerospace and security solutions of tomorrow, shaping a safer future, for all of us. From the depths of the ocean, to the far reaches of space, there's no limit to where a career at BAE Systems could take you. Job Description: As part of the Electrical Engineering Power Team, you will be leading the development of design documents, reviewing supplier documentation, developing technical requirements and undertaking assessment of design compliance to support the development of our electrical systems. Core duties: You'll be developing design solutions to agreed time, cost and quality in accordance with project or business milestones You'll develop and manage requirements and acceptance criteria specific to a system or product and/or across a system of systems, platform or programme You'll understand the contractual and performance requirements for various systems, and support the definition and associated acceptance criteria and events through design, build, integration, installation and commissioning activities You'll produce documentation required to support the design review process, including diagrams; technical specifications; supporting calculations; design evidence and justifications You'll provide technical support to integrated performance and acceptance activities, including acceptance of equipment from suppliers through to system acceptance by the customer and support build activities, defect resolution and change management You'll support the development of estimates for the scope of work and resources required to deliver it to support bids, proposal development and project planning activities for various systems Essential Skills: BEng (Hons) / MEng or equivalent and CEng (or be able to satisfy requirements for CEng) Demonstrable experience of engineering lifecycle with knowledge of AC and DC electrical power systems Understanding of at least one of the following areas: Power system modelling; generators; switchgear; protection; power electronics In depth understanding of Power System Architecture, Power Generation and Distribution, Protection and Co-ordination or Power Earth Fault Monitoring Significant The Electrical Engineering Power Team: The Electrical Engineering Power Team are working on the UK's next-generation SSN design that incorporates technology from the UK, Australia and the United States. The team are responsible for defining the system elements required to feed into the submarine design and build process, including design documentation, spatial modelling and build outputs. We offer relocation support packages across all Submarines roles, subject to meeting eligibility criteria. Why BAE Systems? Here you'll build a career with purpose and limitless possibilities. With lifelong learning and meaningful work, this is a place where you can grow your career with confidence and be empowered to be your best. You'll be recognised for your contribution and enjoy rewards tailored to what's most important to you and your family, support for your financial and personal wellbeing, as well as a balanced lifestyle. In an environment embracing sustainable ways of working and with a strong sense of shared purpose, our supportive culture is a place you can feel you belong and proud of the difference you make. A place where everyone can thrive: We're committed to building an inclusive workplace where everyone feels valued and supported. We know that a diversity of backgrounds, perspectives and experiences strengthens our teams and is vital to the work we do. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date: 28th June 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible.
We are seeking an experienced and highly motivated Principal Product Assurance Engineer to join the Quality Assurance team in Bolton, providing support to the Manufacturing teams. Salary: Circa £50,000 depending on experience Dynamic (hybrid) working: 4 - 5 days per week on-site due to workload classification Security Clearance: British Citizen or a Dual UK national with British citizenship. Restrictions and/or limitations relating to nationality and/or rights to work may apply. As a minimum and after offer stage, all successful candidates will need to undergo HMG Basic Personnel Security Standard checks (BPSS), which are managed by the MBDA Personnel Security Team. What we can offer you: Company bonus: Up to £2,500 (based on company performance and will vary year to year) Pension: maximum total (employer and employee) contribution of up to 14% Overtime: opportunity for paid overtime Flexi Leave: Up to 15 additional days Flexible working: We welcome applicants who are looking for flexible working arrangements Enhanced parental leave: offers up to 26 weeks for maternity, adoption and shared parental leave -enhancements are available for paternity leave, neonatal leave and fertility testing and treatments Facilities: Fantastic site facilities including subsidised meals, free car parking and much more The opportunity: Facilitating practical problem solving activities, determining root causes and the effective implementation of robust corrective actions using the relevant quality tools Carrying out of process audits, issuing non-conformances and facilitating root cause and corrective actions Frontline provision of non-conformance management supporting the manufacturing functions, including the administration of non-conformities and containment activities Collation and analysis of non-conformance data through the business tool, Google NLP, highlighting any adverse trends and risks to the business and highlighting opportunities for improvement. Managing customer concerns and escapes, dealing with Inter company facilities across Europe including France, Italy and Germany and external customers Managing inscapes between business units within manufacturing Interface with the programmes quality representative and the wider quality teams, sharing data packs and progression of non-conformities and improvements Approval of FAI's, C of C's and other product related documents where required Supporting the successful transfer of new products into manufacturing, verifying PFMEA's, Risk register actions and supporting Industrial Validation activities What we're looking for from you: Able to demonstrate relevant work experience ideally backed up with qualifications Demonstrate excellent analytical skills with the ability to use data to identify trends and drive improvements Electrical / electrical test experience would be an advantage Ability and confidence to report to all levels of the business Strong practical problem solving skills being able to lead and facilitate activities leading to improvements Good planning and organising skills to ensure multiple tasks are prioritised and monitored to deliver set objectives Highly self-motivated and demonstrate a determination and persistence to deliver results despite obstacles and setbacks Our company: Peace is not a given, Freedom is not a given, Sovereignty is not a given MBDA is a leading defence organisation. We are proud of the role we play in supporting the Armed Forces who protect our nations. We partner with governments to work together towards a common goal, defending our freedom. We are proud of our employee-led networks, examples include: Gender Equality, Pride, Menopause Matters, Parents and Carers, Armed Forces, Ethnic Diversity, Neurodiversity, Disability and more We recognise that everyone is unique, and we encourage you to speak to us should you require any advice, support or adjustments throughout our recruitment process. Follow us on LinkedIn (MBDA), X Instagram (MBDA_UK) and Glassdoor or visit our MBDA Careers website for more information.
May 10, 2026
Full time
We are seeking an experienced and highly motivated Principal Product Assurance Engineer to join the Quality Assurance team in Bolton, providing support to the Manufacturing teams. Salary: Circa £50,000 depending on experience Dynamic (hybrid) working: 4 - 5 days per week on-site due to workload classification Security Clearance: British Citizen or a Dual UK national with British citizenship. Restrictions and/or limitations relating to nationality and/or rights to work may apply. As a minimum and after offer stage, all successful candidates will need to undergo HMG Basic Personnel Security Standard checks (BPSS), which are managed by the MBDA Personnel Security Team. What we can offer you: Company bonus: Up to £2,500 (based on company performance and will vary year to year) Pension: maximum total (employer and employee) contribution of up to 14% Overtime: opportunity for paid overtime Flexi Leave: Up to 15 additional days Flexible working: We welcome applicants who are looking for flexible working arrangements Enhanced parental leave: offers up to 26 weeks for maternity, adoption and shared parental leave -enhancements are available for paternity leave, neonatal leave and fertility testing and treatments Facilities: Fantastic site facilities including subsidised meals, free car parking and much more The opportunity: Facilitating practical problem solving activities, determining root causes and the effective implementation of robust corrective actions using the relevant quality tools Carrying out of process audits, issuing non-conformances and facilitating root cause and corrective actions Frontline provision of non-conformance management supporting the manufacturing functions, including the administration of non-conformities and containment activities Collation and analysis of non-conformance data through the business tool, Google NLP, highlighting any adverse trends and risks to the business and highlighting opportunities for improvement. Managing customer concerns and escapes, dealing with Inter company facilities across Europe including France, Italy and Germany and external customers Managing inscapes between business units within manufacturing Interface with the programmes quality representative and the wider quality teams, sharing data packs and progression of non-conformities and improvements Approval of FAI's, C of C's and other product related documents where required Supporting the successful transfer of new products into manufacturing, verifying PFMEA's, Risk register actions and supporting Industrial Validation activities What we're looking for from you: Able to demonstrate relevant work experience ideally backed up with qualifications Demonstrate excellent analytical skills with the ability to use data to identify trends and drive improvements Electrical / electrical test experience would be an advantage Ability and confidence to report to all levels of the business Strong practical problem solving skills being able to lead and facilitate activities leading to improvements Good planning and organising skills to ensure multiple tasks are prioritised and monitored to deliver set objectives Highly self-motivated and demonstrate a determination and persistence to deliver results despite obstacles and setbacks Our company: Peace is not a given, Freedom is not a given, Sovereignty is not a given MBDA is a leading defence organisation. We are proud of the role we play in supporting the Armed Forces who protect our nations. We partner with governments to work together towards a common goal, defending our freedom. We are proud of our employee-led networks, examples include: Gender Equality, Pride, Menopause Matters, Parents and Carers, Armed Forces, Ethnic Diversity, Neurodiversity, Disability and more We recognise that everyone is unique, and we encourage you to speak to us should you require any advice, support or adjustments throughout our recruitment process. Follow us on LinkedIn (MBDA), X Instagram (MBDA_UK) and Glassdoor or visit our MBDA Careers website for more information.
Job Title: Principal Engineer - Electrical Engineering (Power) Location: : Barrow-in-Furness / Filton - (Hybrid -2 days a fortnight (Barrow), or 1 day a week(Filton) dependent on business needs. We offer a range of hybrid and flexible working arrangements - please speak to your recruiter about the options for this particular role Salary: £47,241+ (Commensurate with skills and experience) Who we are: Join BAE Systems and you'll be part of something bigger. As a valued member of our global colleague network, you'll bring your unique skills and perspectives to help pioneer progress and protect what matters most. You'll be trusted to play your part in delivering the advanced, technology-led defence, aerospace and security solutions of tomorrow, shaping a safer future, for all of us. From the depths of the ocean, to the far reaches of space, there's no limit to where a career at BAE Systems could take you. Job Description: As part of the Electrical Engineering Power Team, you will be leading the development of design documents, reviewing supplier documentation, developing technical requirements and undertaking assessment of design compliance to support the development of our electrical systems. Core duties: You'll be developing design solutions to agreed time, cost and quality in accordance with project or business milestones You'll develop and manage requirements and acceptance criteria specific to a system or product and/or across a system of systems, platform or programme You'll understand the contractual and performance requirements for various systems, and support the definition and associated acceptance criteria and events through design, build, integration, installation and commissioning activities You'll produce documentation required to support the design review process, including diagrams; technical specifications; supporting calculations; design evidence and justifications You'll provide technical support to integrated performance and acceptance activities, including acceptance of equipment from suppliers through to system acceptance by the customer and support build activities, defect resolution and change management You'll support the development of estimates for the scope of work and resources required to deliver it to support bids, proposal development and project planning activities for various systems Essential Skills: BEng (Hons) / MEng or equivalent and CEng (or be able to satisfy requirements for CEng) Demonstrable experience of engineering lifecycle with knowledge of AC and DC electrical power systems Understanding of at least one of the following areas: Power system modelling; generators; switchgear; protection; power electronics In depth understanding of Power System Architecture, Power Generation and Distribution, Protection and Co-ordination or Power Earth Fault Monitoring Significant The Electrical Engineering Power Team: The Electrical Engineering Power Team are working on the UK's next-generation SSN design that incorporates technology from the UK, Australia and the United States. The team are responsible for defining the system elements required to feed into the submarine design and build process, including design documentation, spatial modelling and build outputs. We offer relocation support packages across all Submarines roles, subject to meeting eligibility criteria. Why BAE Systems? Here you'll build a career with purpose and limitless possibilities. With lifelong learning and meaningful work, this is a place where you can grow your career with confidence and be empowered to be your best. You'll be recognised for your contribution and enjoy rewards tailored to what's most important to you and your family, support for your financial and personal wellbeing, as well as a balanced lifestyle. In an environment embracing sustainable ways of working and with a strong sense of shared purpose, our supportive culture is a place you can feel you belong and proud of the difference you make. A place where everyone can thrive: We're committed to building an inclusive workplace where everyone feels valued and supported. We know that a diversity of backgrounds, perspectives and experiences strengthens our teams and is vital to the work we do. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date: 28th June 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible.
May 09, 2026
Full time
Job Title: Principal Engineer - Electrical Engineering (Power) Location: : Barrow-in-Furness / Filton - (Hybrid -2 days a fortnight (Barrow), or 1 day a week(Filton) dependent on business needs. We offer a range of hybrid and flexible working arrangements - please speak to your recruiter about the options for this particular role Salary: £47,241+ (Commensurate with skills and experience) Who we are: Join BAE Systems and you'll be part of something bigger. As a valued member of our global colleague network, you'll bring your unique skills and perspectives to help pioneer progress and protect what matters most. You'll be trusted to play your part in delivering the advanced, technology-led defence, aerospace and security solutions of tomorrow, shaping a safer future, for all of us. From the depths of the ocean, to the far reaches of space, there's no limit to where a career at BAE Systems could take you. Job Description: As part of the Electrical Engineering Power Team, you will be leading the development of design documents, reviewing supplier documentation, developing technical requirements and undertaking assessment of design compliance to support the development of our electrical systems. Core duties: You'll be developing design solutions to agreed time, cost and quality in accordance with project or business milestones You'll develop and manage requirements and acceptance criteria specific to a system or product and/or across a system of systems, platform or programme You'll understand the contractual and performance requirements for various systems, and support the definition and associated acceptance criteria and events through design, build, integration, installation and commissioning activities You'll produce documentation required to support the design review process, including diagrams; technical specifications; supporting calculations; design evidence and justifications You'll provide technical support to integrated performance and acceptance activities, including acceptance of equipment from suppliers through to system acceptance by the customer and support build activities, defect resolution and change management You'll support the development of estimates for the scope of work and resources required to deliver it to support bids, proposal development and project planning activities for various systems Essential Skills: BEng (Hons) / MEng or equivalent and CEng (or be able to satisfy requirements for CEng) Demonstrable experience of engineering lifecycle with knowledge of AC and DC electrical power systems Understanding of at least one of the following areas: Power system modelling; generators; switchgear; protection; power electronics In depth understanding of Power System Architecture, Power Generation and Distribution, Protection and Co-ordination or Power Earth Fault Monitoring Significant The Electrical Engineering Power Team: The Electrical Engineering Power Team are working on the UK's next-generation SSN design that incorporates technology from the UK, Australia and the United States. The team are responsible for defining the system elements required to feed into the submarine design and build process, including design documentation, spatial modelling and build outputs. We offer relocation support packages across all Submarines roles, subject to meeting eligibility criteria. Why BAE Systems? Here you'll build a career with purpose and limitless possibilities. With lifelong learning and meaningful work, this is a place where you can grow your career with confidence and be empowered to be your best. You'll be recognised for your contribution and enjoy rewards tailored to what's most important to you and your family, support for your financial and personal wellbeing, as well as a balanced lifestyle. In an environment embracing sustainable ways of working and with a strong sense of shared purpose, our supportive culture is a place you can feel you belong and proud of the difference you make. A place where everyone can thrive: We're committed to building an inclusive workplace where everyone feels valued and supported. We know that a diversity of backgrounds, perspectives and experiences strengthens our teams and is vital to the work we do. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date: 28th June 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible.
The Opportunity: Maintenance Engineer - Mobile Contract: Permanent Location: Lincoln, Lincolnshire The Impact you will have: Adhering to safety guidelines set and all policies set out by customers and Briggs Equipment The service and maintenance of Diesel, Petrol and Electrically powered Small Plant, Agricultural and Ground Care Equipment This will involve attending Breakdowns, Fault Finding and completing planned Preventative Maintenance Ensuring customer service is kept to a high level and any queries are addressed Complete job activity electronically and ensure all required parts to complete tasks are ordered Ensuring the company vehicle is maintained to a high standard and has the correct parts stock Ensuring customer relationship are maintained and developed through high standards of service What will help you to excel in this role: Relevant technical qualification Previous experience within a similar role Good understanding of hydraulic, mechanical and electrical principals The ability to work independently and under pressure The ability to manage and prioritise workload Understanding customer needs What you can expect from us: 40 hour working week Overtime is payable at x1.5 Monday - Saturday and x2 on Sunday Vehicle is available for private use if desired (tax to be paid) Accessibility If you require any reasonable adjustments to assist you in the interview process, then please contact a member of the Recruitment team and inform them prior to attending so we can ensure these are met.
May 09, 2026
Full time
The Opportunity: Maintenance Engineer - Mobile Contract: Permanent Location: Lincoln, Lincolnshire The Impact you will have: Adhering to safety guidelines set and all policies set out by customers and Briggs Equipment The service and maintenance of Diesel, Petrol and Electrically powered Small Plant, Agricultural and Ground Care Equipment This will involve attending Breakdowns, Fault Finding and completing planned Preventative Maintenance Ensuring customer service is kept to a high level and any queries are addressed Complete job activity electronically and ensure all required parts to complete tasks are ordered Ensuring the company vehicle is maintained to a high standard and has the correct parts stock Ensuring customer relationship are maintained and developed through high standards of service What will help you to excel in this role: Relevant technical qualification Previous experience within a similar role Good understanding of hydraulic, mechanical and electrical principals The ability to work independently and under pressure The ability to manage and prioritise workload Understanding customer needs What you can expect from us: 40 hour working week Overtime is payable at x1.5 Monday - Saturday and x2 on Sunday Vehicle is available for private use if desired (tax to be paid) Accessibility If you require any reasonable adjustments to assist you in the interview process, then please contact a member of the Recruitment team and inform them prior to attending so we can ensure these are met.
This role provides a unique chance to shape how MBDA undertakes production testing. Salary: Circa £50,000 depending on experience Dynamic (hybrid) working: 4-5 days per week on-site due to workload classification Security Clearance: British Citizen only. Restrictions and/or limitations relating to nationality and/or rights to work may apply. As a minimum and after offer stage, all successful candidates will need to undergo HMG Basic Personnel Security Standard checks (BPSS), which are managed by the MBDA Personnel Security Team. What we can offer you: Company bonus: Up to £2,500 (based on company performance and will vary year to year) Pension: maximum total (employer and employee) contribution of up to 14% Overtime: opportunity for paid overtime Flexi Leave: Up to 15 additional days Flexible working: We welcome applicants who are looking for flexible working arrangements Enhanced parental leave: offers up to 26 weeks for maternity, adoption and shared parental leave -enhancements are available for paternity leave, neonatal leave and fertility testing and treatments Facilities: Fantastic site facilities including subsidised meals, free car parking. Healthcare Cash Plan: The Healthcare Cash Plan benefit provides the option to claim cash back on everyday healthcare expenses such as optical, dental, health and wellbeing and more. The opportunity: This opportunity is for a Principal Test Engineer to join the Manufacturing organisation supporting test system introduction and test and diagnostics of electrical/electronic weapon systems and sub-assemblies during the development / early production phase. You will work as part of the Manufacturing UK Test Engineering function, responsible for development testing and ensuring production readiness of new products and their test solutions. Providing Test Engineering support during Design / Development phases from initial concept through to Production Readiness Review and release to Operations. Supporting Test Facility introduction and ensure that appropriate configuration control of equipment and facilities is in place prior to use, including generating supporting test specifications and operator instructions. Supporting testing of electrical/electronic weapon systems, sub-assemblies and circuit cards, with diagnosis of development test failures down to circuit card and potentially component level, including identification of proposed remedial and corrective actions. Working closely with Operations, design teams and other stakeholders to overcome any technical challenges. Providing technical support and advice to the Test Engineering Team Lead and guiding and mentoring less experienced test engineers within the team. You will be working with a small team of dedicated engineers in a fast-paced but friendly and inclusive manufacturing environment. The team has a great mix of personnel ranging from apprentices and graduate engineers through to experienced technical practitioners, all striving to deliver technical excellence across a number of different products in development and production. What we're looking for from you: Minimum Qualification Level Level 4 or greater in Engineering (preferably Electrical, Electronic, Aerospace or Mechanical), Physics or Maths. Must include modules for Electronic Principles (digital or analogue) or Electrical Principles. Several years' experience in related industry / manufacturing. A good understanding of electrical/electronic and RF measurement and test principles and test equipment, as well as systems-level functional testing. Experience of the product development lifecycle and supporting processes, in an electronics manufacturing environment. Significant experience of using both manual and automated test equipment, preferably in a defence organisation or similar manufacturing environment. The ability to plan and organise own work in order to ensure multiple tasks can be prioritised and delivered against Project objectives, whilst being available to support others. Good verbal and written communication skills, including working within a team, generation of test specifications, operator instructions and technical reports based on higher-level requirements. Our company: Peace is not a given, Freedom is not a given, Sovereignty is not a given MBDA is a leading defence organisation. We are proud of the role we play in supporting the Armed Forces who protect our nations. We partner with governments to work together towards a common goal, defending our freedom. We are proud of our employee-led networks, examples include: Gender Equality, Pride, Menopause Matters, Parents and Carers, Armed Forces, Ethnic Diversity, Neurodiversity, Disability and more We recognise that everyone is unique, and we encourage you to speak to us should you require any advice, support or adjustments throughout our recruitment process. Follow us on LinkedIn (MBDA), X Instagram (MBDA_UK) and Glassdoor or visit our MBDA Careers website for more information.
May 09, 2026
Full time
This role provides a unique chance to shape how MBDA undertakes production testing. Salary: Circa £50,000 depending on experience Dynamic (hybrid) working: 4-5 days per week on-site due to workload classification Security Clearance: British Citizen only. Restrictions and/or limitations relating to nationality and/or rights to work may apply. As a minimum and after offer stage, all successful candidates will need to undergo HMG Basic Personnel Security Standard checks (BPSS), which are managed by the MBDA Personnel Security Team. What we can offer you: Company bonus: Up to £2,500 (based on company performance and will vary year to year) Pension: maximum total (employer and employee) contribution of up to 14% Overtime: opportunity for paid overtime Flexi Leave: Up to 15 additional days Flexible working: We welcome applicants who are looking for flexible working arrangements Enhanced parental leave: offers up to 26 weeks for maternity, adoption and shared parental leave -enhancements are available for paternity leave, neonatal leave and fertility testing and treatments Facilities: Fantastic site facilities including subsidised meals, free car parking. Healthcare Cash Plan: The Healthcare Cash Plan benefit provides the option to claim cash back on everyday healthcare expenses such as optical, dental, health and wellbeing and more. The opportunity: This opportunity is for a Principal Test Engineer to join the Manufacturing organisation supporting test system introduction and test and diagnostics of electrical/electronic weapon systems and sub-assemblies during the development / early production phase. You will work as part of the Manufacturing UK Test Engineering function, responsible for development testing and ensuring production readiness of new products and their test solutions. Providing Test Engineering support during Design / Development phases from initial concept through to Production Readiness Review and release to Operations. Supporting Test Facility introduction and ensure that appropriate configuration control of equipment and facilities is in place prior to use, including generating supporting test specifications and operator instructions. Supporting testing of electrical/electronic weapon systems, sub-assemblies and circuit cards, with diagnosis of development test failures down to circuit card and potentially component level, including identification of proposed remedial and corrective actions. Working closely with Operations, design teams and other stakeholders to overcome any technical challenges. Providing technical support and advice to the Test Engineering Team Lead and guiding and mentoring less experienced test engineers within the team. You will be working with a small team of dedicated engineers in a fast-paced but friendly and inclusive manufacturing environment. The team has a great mix of personnel ranging from apprentices and graduate engineers through to experienced technical practitioners, all striving to deliver technical excellence across a number of different products in development and production. What we're looking for from you: Minimum Qualification Level Level 4 or greater in Engineering (preferably Electrical, Electronic, Aerospace or Mechanical), Physics or Maths. Must include modules for Electronic Principles (digital or analogue) or Electrical Principles. Several years' experience in related industry / manufacturing. A good understanding of electrical/electronic and RF measurement and test principles and test equipment, as well as systems-level functional testing. Experience of the product development lifecycle and supporting processes, in an electronics manufacturing environment. Significant experience of using both manual and automated test equipment, preferably in a defence organisation or similar manufacturing environment. The ability to plan and organise own work in order to ensure multiple tasks can be prioritised and delivered against Project objectives, whilst being available to support others. Good verbal and written communication skills, including working within a team, generation of test specifications, operator instructions and technical reports based on higher-level requirements. Our company: Peace is not a given, Freedom is not a given, Sovereignty is not a given MBDA is a leading defence organisation. We are proud of the role we play in supporting the Armed Forces who protect our nations. We partner with governments to work together towards a common goal, defending our freedom. We are proud of our employee-led networks, examples include: Gender Equality, Pride, Menopause Matters, Parents and Carers, Armed Forces, Ethnic Diversity, Neurodiversity, Disability and more We recognise that everyone is unique, and we encourage you to speak to us should you require any advice, support or adjustments throughout our recruitment process. Follow us on LinkedIn (MBDA), X Instagram (MBDA_UK) and Glassdoor or visit our MBDA Careers website for more information.
