ServiceNow Test Analyst Hybrid Salary up to 65k A QA Engineer is required to join a growing ServiceNow implementation team within an IT Systems provider. The role is a vital position; and the successful candidate will have a pivotal role in system delivery with the chance to make a significant impact on the quality of output. You will be both responsible for testing in-house developments and third-party platforms. Your tasks will include: Working closely with the whole implementation team to create, review, and execute test plans and scripts for functional testing; both manual and automated. Analysing technical/functional specifications and user stories to drive out test scripts & steps. Overcoming risks and any issues found during testing. To be successful in the role you will: Have previous experience of software testing, manual or automated, ideally with ServiceNow - ITSM, CSM. Working experience of test and defect management tools, ideally Jira, Zephyr or DevOps. An understanding of ITIL, and experience of advising best practices, methodologies and test execution. Knowledge & experience of designing, developing and executing ATF test cases in ServiceNow. ServiceNow certification is advantageous as is ISTQB Test Certification.
May 15, 2026
Full time
ServiceNow Test Analyst Hybrid Salary up to 65k A QA Engineer is required to join a growing ServiceNow implementation team within an IT Systems provider. The role is a vital position; and the successful candidate will have a pivotal role in system delivery with the chance to make a significant impact on the quality of output. You will be both responsible for testing in-house developments and third-party platforms. Your tasks will include: Working closely with the whole implementation team to create, review, and execute test plans and scripts for functional testing; both manual and automated. Analysing technical/functional specifications and user stories to drive out test scripts & steps. Overcoming risks and any issues found during testing. To be successful in the role you will: Have previous experience of software testing, manual or automated, ideally with ServiceNow - ITSM, CSM. Working experience of test and defect management tools, ideally Jira, Zephyr or DevOps. An understanding of ITIL, and experience of advising best practices, methodologies and test execution. Knowledge & experience of designing, developing and executing ATF test cases in ServiceNow. ServiceNow certification is advantageous as is ISTQB Test Certification.
# Graduate Flood Risk and Drainage ConsultantApply Now Graduate Flood Risk and Drainage Consultant Salary: £24,000-£26,000 per annum (full-time), depending on qualifications and experience, plus bi-annual performance bonus Contract: Permanent Location: Crawley, West Sussex Supporting the preparation of Sequential and Exception Test documentation where required Applying knowledge of the NPPF, local policy and national standards to inform site advice Contributing to planning strategy discussions where flood risk constraints influence development proposals Supporting early-stage site appraisal and constraint analysis to inform development feasibility prior to planning submission Bachelor's and/or Master's degree in a relevant discipline (e.g. Geography, Environmental Science, Civil Engineering or related subject) Genuine interest in flood risk management and sustainable drainage systems Intellectual curiosity and a genuine interest in understanding the underlying mechanisms of flood risk and drainage design, rather than simply applying standard guidance Strong written communication skills, with the ability to structure clear and defensible technical reports Willingness to discuss technical findings in internal and client discussions Comfortable working with technical datasets, maps and modelling outputs Organised and capable of managing workload across multiple live projects Analytical and methodical approach to interpreting technical data Proficiency with IT and GIS software (QGIS preferred) Commitment to maintaining high professional and QA standards Willingness to take responsibility for work outputs and engage constructively in technical discussion and review Exposure to drainage modelling software such as Causeway Flow, MicroDrainage or InfoDrainage (Causeway Flow preferred) Experience using AutoCAD to prepare technical drawings Prior internship, placement or relevant work experience Knowledge of NPPF and TAN15 planning policy and understanding of planning processes in England and Wales Awareness of or membership with CIWEM Awareness of emerging AI-assisted tools and experience using them to support research, analysis or drafting, alongside an understanding of their limitations
May 15, 2026
Full time
# Graduate Flood Risk and Drainage ConsultantApply Now Graduate Flood Risk and Drainage Consultant Salary: £24,000-£26,000 per annum (full-time), depending on qualifications and experience, plus bi-annual performance bonus Contract: Permanent Location: Crawley, West Sussex Supporting the preparation of Sequential and Exception Test documentation where required Applying knowledge of the NPPF, local policy and national standards to inform site advice Contributing to planning strategy discussions where flood risk constraints influence development proposals Supporting early-stage site appraisal and constraint analysis to inform development feasibility prior to planning submission Bachelor's and/or Master's degree in a relevant discipline (e.g. Geography, Environmental Science, Civil Engineering or related subject) Genuine interest in flood risk management and sustainable drainage systems Intellectual curiosity and a genuine interest in understanding the underlying mechanisms of flood risk and drainage design, rather than simply applying standard guidance Strong written communication skills, with the ability to structure clear and defensible technical reports Willingness to discuss technical findings in internal and client discussions Comfortable working with technical datasets, maps and modelling outputs Organised and capable of managing workload across multiple live projects Analytical and methodical approach to interpreting technical data Proficiency with IT and GIS software (QGIS preferred) Commitment to maintaining high professional and QA standards Willingness to take responsibility for work outputs and engage constructively in technical discussion and review Exposure to drainage modelling software such as Causeway Flow, MicroDrainage or InfoDrainage (Causeway Flow preferred) Experience using AutoCAD to prepare technical drawings Prior internship, placement or relevant work experience Knowledge of NPPF and TAN15 planning policy and understanding of planning processes in England and Wales Awareness of or membership with CIWEM Awareness of emerging AI-assisted tools and experience using them to support research, analysis or drafting, alongside an understanding of their limitations
LTM Recruitment Specialists Ltd
Newcastle Upon Tyne, Tyne And Wear
My client, arguably one of the best companies in the sector, are an expanding international M&E consultancy, with a proven track record in low energy design, focused on providing excellent design solutions to clients. They are looking to employ an experienced Senior / Principal Engineer to be based in our NE office. You will have experience in the delivery of European data centres and mission-critical projects, along with other sector experience including process pharmaceutical, healthcare, commercial, labs and/or clean rooms would be desirable. Role Responsibilities • Responsible for the running of large projects. Undertakes a client facing role in the development and design and coordination of engineering project services for Mechanical or Electrical installations, systems, equipment, facilities etc. (Several building types) • Develops and specifies applications of controls, instruments, and operating systems for all building engineering services purposes • Surveys, tests, carries out dilapidation reports on existing electrical/mechanical installations • Specifies activities to ensure that manufacturing, construction, installation, and operational testing confirm to functional specifications and customer requirements • Day to day decision making on project progress and direct liaison with and provides advice to client • Represents Company at technical meetings with customers, professional teams and contractors teams • Ensures engineering calculations and drawings meet required robust industry and legal standards • Leads on the coordination of engineering services • Takes a holistic view in the selection and application of engineering concepts and solutions Role Requirements You will need to possess the following professional and technical expertise: • BSc/BEng or degree in appropriate engineering discipline or have sufficient equivalent experience • MCIBSE/MIEE or HNC/HND plus appropriate experience or equivalent • Working towards Chartered Eng status • Significant experience of specification design for several building types • Sound knowledge of key Health and Safety issues and legislation • Knowledge of MS Office applications word, excel etc • Ability to use IT based calculation and spreadsheet software • Good understanding of BS standards/ UK Regulations/Codes • Ability to prioritise own workload • Ability to work to deadlines • Managerial skills • Presentation skills • Support the delivery of projects in accordance with the expectations of the Project Delivery Process from a Project Management, Financial Management, QA/QC and Technical Review perspective.
May 15, 2026
Full time
My client, arguably one of the best companies in the sector, are an expanding international M&E consultancy, with a proven track record in low energy design, focused on providing excellent design solutions to clients. They are looking to employ an experienced Senior / Principal Engineer to be based in our NE office. You will have experience in the delivery of European data centres and mission-critical projects, along with other sector experience including process pharmaceutical, healthcare, commercial, labs and/or clean rooms would be desirable. Role Responsibilities • Responsible for the running of large projects. Undertakes a client facing role in the development and design and coordination of engineering project services for Mechanical or Electrical installations, systems, equipment, facilities etc. (Several building types) • Develops and specifies applications of controls, instruments, and operating systems for all building engineering services purposes • Surveys, tests, carries out dilapidation reports on existing electrical/mechanical installations • Specifies activities to ensure that manufacturing, construction, installation, and operational testing confirm to functional specifications and customer requirements • Day to day decision making on project progress and direct liaison with and provides advice to client • Represents Company at technical meetings with customers, professional teams and contractors teams • Ensures engineering calculations and drawings meet required robust industry and legal standards • Leads on the coordination of engineering services • Takes a holistic view in the selection and application of engineering concepts and solutions Role Requirements You will need to possess the following professional and technical expertise: • BSc/BEng or degree in appropriate engineering discipline or have sufficient equivalent experience • MCIBSE/MIEE or HNC/HND plus appropriate experience or equivalent • Working towards Chartered Eng status • Significant experience of specification design for several building types • Sound knowledge of key Health and Safety issues and legislation • Knowledge of MS Office applications word, excel etc • Ability to use IT based calculation and spreadsheet software • Good understanding of BS standards/ UK Regulations/Codes • Ability to prioritise own workload • Ability to work to deadlines • Managerial skills • Presentation skills • Support the delivery of projects in accordance with the expectations of the Project Delivery Process from a Project Management, Financial Management, QA/QC and Technical Review perspective.
Role: QA Lead Location: Manchester Working arrangement: hybrid - 2 days a week in the office Salary: up to £75k About the role This is a role for someone who cares about building reliable software and wants to shape how quality is handled across an entire platform. You will take ownership of how testing is approached across a complex product set, from core systems to AI-driven features. The focus is on making quality part of everyday development, not something checked at the end. You will still be hands-on. That means working with automation, exploring edge cases, supporting releases, and helping teams understand where risks sit and how to reduce them. You will also guide how AI-based features are tested in a way that is practical and safe. You will work closely with engineers, product managers, and platform teams to make sure releases are steady, predictable, and based on clear evidence. What you will do Set the direction for testing across the platform, from planning through to production monitoring Build and improve automated test coverage using tools such as C#, xUnit, Selenium and Playwright Support teams with test design, risk awareness, and release readiness Put in place clear processes for defect handling and release validation Help teams test both traditional systems and AI-driven features in a consistent way What we are looking for You are someone who understands software quality in practice, not just in theory. You have worked with automation and know where it adds value and where it does not. You are comfortable getting into the detail when needed, but also able to step back and improve how teams work overall. You can work with engineers as a peer, guiding rather than directing. You are able to explain trade-offs clearly and make decisions based on risk and impact. Experience with AI-based systems is useful, but what matters more is your approach to testing complex and less predictable behaviour. What you can expect You will have the space to shape how quality is done, not just maintain what is already there. The work will be varied, covering both established systems and newer AI features. The team environment is collaborative, with a focus on solving problems and improving how things are done over time. If you are looking for a role where you can influence how software is built and released, while staying close to the technical work, this is worth exploring. We welcome diverse applicants and are dedicated to treating all applicants with dignity and respect, regardless of background.
May 15, 2026
Full time
Role: QA Lead Location: Manchester Working arrangement: hybrid - 2 days a week in the office Salary: up to £75k About the role This is a role for someone who cares about building reliable software and wants to shape how quality is handled across an entire platform. You will take ownership of how testing is approached across a complex product set, from core systems to AI-driven features. The focus is on making quality part of everyday development, not something checked at the end. You will still be hands-on. That means working with automation, exploring edge cases, supporting releases, and helping teams understand where risks sit and how to reduce them. You will also guide how AI-based features are tested in a way that is practical and safe. You will work closely with engineers, product managers, and platform teams to make sure releases are steady, predictable, and based on clear evidence. What you will do Set the direction for testing across the platform, from planning through to production monitoring Build and improve automated test coverage using tools such as C#, xUnit, Selenium and Playwright Support teams with test design, risk awareness, and release readiness Put in place clear processes for defect handling and release validation Help teams test both traditional systems and AI-driven features in a consistent way What we are looking for You are someone who understands software quality in practice, not just in theory. You have worked with automation and know where it adds value and where it does not. You are comfortable getting into the detail when needed, but also able to step back and improve how teams work overall. You can work with engineers as a peer, guiding rather than directing. You are able to explain trade-offs clearly and make decisions based on risk and impact. Experience with AI-based systems is useful, but what matters more is your approach to testing complex and less predictable behaviour. What you can expect You will have the space to shape how quality is done, not just maintain what is already there. The work will be varied, covering both established systems and newer AI features. The team environment is collaborative, with a focus on solving problems and improving how things are done over time. If you are looking for a role where you can influence how software is built and released, while staying close to the technical work, this is worth exploring. We welcome diverse applicants and are dedicated to treating all applicants with dignity and respect, regardless of background.
Lead QA Engineer Location: Nottingham, 2 days a week in the office Salary: up to £60k depending on experience We re looking for a passionate and detail-driven QA professional who wants to take ownership of quality, improve how software is built, and play a key role in shaping how products are delivered to users at scale. This is a hands-on technical leadership role where you ll work closely with developers, business analysts, and cloud engineering teams to strengthen testing practices, reduce defects in production, and continuously improve the delivery pipeline. You ll be central to defining what good quality looks like and ensuring it is consistently achieved. You ll thrive in this role if you enjoy getting into the detail of how systems work, identifying issues before they reach customers, and building confidence in every release that goes out the door. What You ll Be Doing You ll take ownership of quality assurance across the development lifecycle, working closely with stakeholders to shape clear, testable requirements and ensure defects are well understood, documented, and resolved effectively. You ll design, maintain, and improve automated test coverage using modern testing frameworks, while also contributing to broader testing strategy, including API and performance testing. You ll work within CI/CD pipelines to help ensure smooth, reliable, and efficient releases. You ll also play a key role in release readiness, collaborating with engineering and product teams to ensure every deployment meets agreed quality standards and is delivered with confidence. Alongside hands-on testing, you ll help define QA standards across the team, contribute to continuous improvement initiatives, and provide meaningful reporting on quality metrics and release efficiency. What You Bring You ll bring strong hands-on experience in modern QA engineering, along with a mindset focused on prevention rather than just detection of issues. We re looking for someone comfortable working across: TypeScript and modern browser debugging tools Test automation frameworks such as Cypress, Playwright, or Selenium API testing tools such as Postman or Bruno Git-based workflows and CI/CD environments (including Bitbucket) Performance and load testing tools such as k6 or JMeter You ll also be confident working in Agile environments, collaborating with cross-functional teams, and clearly communicating complex technical issues in a simple, structured way. A strong understanding of SQL, AWS (particularly monitoring tools such as CloudWatch), and front-end technologies such as CSS selectors will be valuable. Experience with Vue.js is also beneficial. You ll ideally have some exposure to test case management tools and release management practices, along with an interest in improving automation, efficiency, and delivery quality. Leadership or mentoring experience within a small team will be an advantage, as this role has a natural progression into broader QA ownership and influence. The Kind of Person Who Thrives Here You re someone who notices the small details others miss. You enjoy understanding how systems behave under pressure, and you take pride in improving both product quality and engineering processes. You re proactive, collaborative, and comfortable working across technical and non-technical teams to get things done properly. We welcome diverse applicants and are dedicated to treating all applicants with dignity and respect, regardless of background.
May 15, 2026
Full time
Lead QA Engineer Location: Nottingham, 2 days a week in the office Salary: up to £60k depending on experience We re looking for a passionate and detail-driven QA professional who wants to take ownership of quality, improve how software is built, and play a key role in shaping how products are delivered to users at scale. This is a hands-on technical leadership role where you ll work closely with developers, business analysts, and cloud engineering teams to strengthen testing practices, reduce defects in production, and continuously improve the delivery pipeline. You ll be central to defining what good quality looks like and ensuring it is consistently achieved. You ll thrive in this role if you enjoy getting into the detail of how systems work, identifying issues before they reach customers, and building confidence in every release that goes out the door. What You ll Be Doing You ll take ownership of quality assurance across the development lifecycle, working closely with stakeholders to shape clear, testable requirements and ensure defects are well understood, documented, and resolved effectively. You ll design, maintain, and improve automated test coverage using modern testing frameworks, while also contributing to broader testing strategy, including API and performance testing. You ll work within CI/CD pipelines to help ensure smooth, reliable, and efficient releases. You ll also play a key role in release readiness, collaborating with engineering and product teams to ensure every deployment meets agreed quality standards and is delivered with confidence. Alongside hands-on testing, you ll help define QA standards across the team, contribute to continuous improvement initiatives, and provide meaningful reporting on quality metrics and release efficiency. What You Bring You ll bring strong hands-on experience in modern QA engineering, along with a mindset focused on prevention rather than just detection of issues. We re looking for someone comfortable working across: TypeScript and modern browser debugging tools Test automation frameworks such as Cypress, Playwright, or Selenium API testing tools such as Postman or Bruno Git-based workflows and CI/CD environments (including Bitbucket) Performance and load testing tools such as k6 or JMeter You ll also be confident working in Agile environments, collaborating with cross-functional teams, and clearly communicating complex technical issues in a simple, structured way. A strong understanding of SQL, AWS (particularly monitoring tools such as CloudWatch), and front-end technologies such as CSS selectors will be valuable. Experience with Vue.js is also beneficial. You ll ideally have some exposure to test case management tools and release management practices, along with an interest in improving automation, efficiency, and delivery quality. Leadership or mentoring experience within a small team will be an advantage, as this role has a natural progression into broader QA ownership and influence. The Kind of Person Who Thrives Here You re someone who notices the small details others miss. You enjoy understanding how systems behave under pressure, and you take pride in improving both product quality and engineering processes. You re proactive, collaborative, and comfortable working across technical and non-technical teams to get things done properly. We welcome diverse applicants and are dedicated to treating all applicants with dignity and respect, regardless of background.
Lead Developer - VP - XVA Technology Engineer the future of global finance. At Citi, our Tech team doesn't just support finance - we are helping to redefine it. Every day, $5 trillion crosses through our network. We do business in 180+ countries operating at a scale few can match. From deploying advanced AI to helping shape global markets, we build systems that matter. Look to join a team where your work helps influence economies, your ideas can drive innovation and outcomes, and your growth is backed by mentorship, continuous learning and flexibility with potential hybrid work opportunities. Help solve real world challenges that touch millions and get the opportunity to build the future of finance with Citi Tech. Equities Tech Equities Technology at Citi is undertaking a bold, multi year transformation to build a best in class global platform across execution, prime, clearing and cross product margining. We are re engineering our technology estate to achieve world leading performance and resiliency, enabling new capabilities in advanced execution, global market connectivity, and modernised post trade, clearing and margin processes. Our ambition is to deliver a seamlessly integrated, highly automated platform that drives outstanding client outcomes and accelerates growth across our global franchise. As part of the team, you'll collaborate closely with high calibre engineers and deeply engaged business and product partners - working together to define and deliver the next generation of Equities technology at Citi. The Team XVA Technology at Citi is undertaking a bold, multi year transformation to build a best in class centralised cross asset platform risk system. We are re engineering our technology estate to achieve world leading performance and resiliency, enabling new capabilities. Our ambition is to deliver a seamlessly integrated, highly automated platform that drives outstanding client outcomes and accelerates growth across our global franchise. As part of the team, you'll collaborate closely with high calibre engineers and deeply engaged business and product partners - working together to define and deliver the next generation of XVA technology at Citi. Role Overview / What will you do: As an Applications Development Technology Lead Analyst, you will be instrumental in shaping the future of our product quality and delivery, working towards a target state of a fully automated platform with minimal manual QA intervention. This role combines strategic vision with rigorous quality assurance expertise, with a strong emphasis on driving value through automation, particularly in the realm of Generative AI. Lead application systems analysis and programming activities, ensuring application design adheres to the overall architecture blueprint. Drive product quality and delivery through automation initiatives, especially in generative AI, targeting a fully automated platform with minimal manual QA intervention. Partner with management teams to define necessary system enhancements, deploy new products, and resolve high impact problems through in depth evaluation of complex business processes. Collaborate with development teams and Product Owners to formulate comprehensive requirements and propose innovative, efficient solutions. Define and drive the strategy for quality automation, overseeing testing priorities, road mapping for releases, and continuous improvement. Act as a central point of contact for interdepartmental communication, ensuring alignment and seamless collaboration across various project impacts. Provide technical expertise, mentor mid level developers and analysts, and establish standards for coding, testing, debugging, and implementation. Proactively assess risk, ensure compliance with laws and regulations, and maintain clear, concise communication across all organizational levels. Key Skills and Experience required Bachelor's degree in Computer Science, Engineering, or a related field (Master's degree preferred). Proven relevant experience in Applications Development, systems analysis, or a similar tech lead role. Proven experience in product ownership, quality assurance management, or a hybrid role within a technology driven environment. Extensive experience with system analysis, software application programming, and managing successful projects. Strong understanding of the Software Development Lifecycle (SDLC) and various testing methodologies, with experience driving automation initiatives. Demonstrated leadership, project management, and Subject Matter Expertise in at least one area of Applications Development. Excellent written, verbal, and interpersonal communication skills, ensuring effective dissemination of information. Any Beneficial / Nice to have skills and experience Experience with Generative AI (Gen AI) concepts and their application in product development or quality assurance. Familiarity with AI powered development tools such as Copilot. Strong analytical and problem solving abilities, with an ability to adjust priorities quickly. Experience working in an Agile/Scrum development environment. Ability to think strategically and translate vision into actionable plans. This job description provides a high level review of the types of work performed. Other job related duties may be assigned as required. What we'll provide you By joining Citi, you will not only be part of a business casual workplace with a hybrid working model (up to 2 days working at home per week), but also receive a competitive base salary (which is annually reviewed), and enjoy a whole host of additional benefits such as: 27 days annual leave (plus bank holidays) A discretional annual performance related bonus Private Medical Care & Life Insurance Employee Assistance Program Pension Plan Paid Parental Leave Special discounts for employees, family, and friends Access to an array of learning and development resources Alongside these benefits Citi is committed to ensuring our workplace is where everyone feels comfortable coming to work as their whole self, every day. We want the best talent around the world to be energized to join us, motivated to stay and empowered to thrive. Citi is an equal opportunity employer, and qualified candidates will receive consideration without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability, status as a protected veteran, or any other characteristic protected by law. If you are a person with a disability and need a reasonable accommodation to use our search tools and/or apply for a career opportunity review Accessibility at Citi. View Citi's EEO Policy Statement and the Know Your Rights poster.
May 15, 2026
Full time
Lead Developer - VP - XVA Technology Engineer the future of global finance. At Citi, our Tech team doesn't just support finance - we are helping to redefine it. Every day, $5 trillion crosses through our network. We do business in 180+ countries operating at a scale few can match. From deploying advanced AI to helping shape global markets, we build systems that matter. Look to join a team where your work helps influence economies, your ideas can drive innovation and outcomes, and your growth is backed by mentorship, continuous learning and flexibility with potential hybrid work opportunities. Help solve real world challenges that touch millions and get the opportunity to build the future of finance with Citi Tech. Equities Tech Equities Technology at Citi is undertaking a bold, multi year transformation to build a best in class global platform across execution, prime, clearing and cross product margining. We are re engineering our technology estate to achieve world leading performance and resiliency, enabling new capabilities in advanced execution, global market connectivity, and modernised post trade, clearing and margin processes. Our ambition is to deliver a seamlessly integrated, highly automated platform that drives outstanding client outcomes and accelerates growth across our global franchise. As part of the team, you'll collaborate closely with high calibre engineers and deeply engaged business and product partners - working together to define and deliver the next generation of Equities technology at Citi. The Team XVA Technology at Citi is undertaking a bold, multi year transformation to build a best in class centralised cross asset platform risk system. We are re engineering our technology estate to achieve world leading performance and resiliency, enabling new capabilities. Our ambition is to deliver a seamlessly integrated, highly automated platform that drives outstanding client outcomes and accelerates growth across our global franchise. As part of the team, you'll collaborate closely with high calibre engineers and deeply engaged business and product partners - working together to define and deliver the next generation of XVA technology at Citi. Role Overview / What will you do: As an Applications Development Technology Lead Analyst, you will be instrumental in shaping the future of our product quality and delivery, working towards a target state of a fully automated platform with minimal manual QA intervention. This role combines strategic vision with rigorous quality assurance expertise, with a strong emphasis on driving value through automation, particularly in the realm of Generative AI. Lead application systems analysis and programming activities, ensuring application design adheres to the overall architecture blueprint. Drive product quality and delivery through automation initiatives, especially in generative AI, targeting a fully automated platform with minimal manual QA intervention. Partner with management teams to define necessary system enhancements, deploy new products, and resolve high impact problems through in depth evaluation of complex business processes. Collaborate with development teams and Product Owners to formulate comprehensive requirements and propose innovative, efficient solutions. Define and drive the strategy for quality automation, overseeing testing priorities, road mapping for releases, and continuous improvement. Act as a central point of contact for interdepartmental communication, ensuring alignment and seamless collaboration across various project impacts. Provide technical expertise, mentor mid level developers and analysts, and establish standards for coding, testing, debugging, and implementation. Proactively assess risk, ensure compliance with laws and regulations, and maintain clear, concise communication across all organizational levels. Key Skills and Experience required Bachelor's degree in Computer Science, Engineering, or a related field (Master's degree preferred). Proven relevant experience in Applications Development, systems analysis, or a similar tech lead role. Proven experience in product ownership, quality assurance management, or a hybrid role within a technology driven environment. Extensive experience with system analysis, software application programming, and managing successful projects. Strong understanding of the Software Development Lifecycle (SDLC) and various testing methodologies, with experience driving automation initiatives. Demonstrated leadership, project management, and Subject Matter Expertise in at least one area of Applications Development. Excellent written, verbal, and interpersonal communication skills, ensuring effective dissemination of information. Any Beneficial / Nice to have skills and experience Experience with Generative AI (Gen AI) concepts and their application in product development or quality assurance. Familiarity with AI powered development tools such as Copilot. Strong analytical and problem solving abilities, with an ability to adjust priorities quickly. Experience working in an Agile/Scrum development environment. Ability to think strategically and translate vision into actionable plans. This job description provides a high level review of the types of work performed. Other job related duties may be assigned as required. What we'll provide you By joining Citi, you will not only be part of a business casual workplace with a hybrid working model (up to 2 days working at home per week), but also receive a competitive base salary (which is annually reviewed), and enjoy a whole host of additional benefits such as: 27 days annual leave (plus bank holidays) A discretional annual performance related bonus Private Medical Care & Life Insurance Employee Assistance Program Pension Plan Paid Parental Leave Special discounts for employees, family, and friends Access to an array of learning and development resources Alongside these benefits Citi is committed to ensuring our workplace is where everyone feels comfortable coming to work as their whole self, every day. We want the best talent around the world to be energized to join us, motivated to stay and empowered to thrive. Citi is an equal opportunity employer, and qualified candidates will receive consideration without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability, status as a protected veteran, or any other characteristic protected by law. If you are a person with a disability and need a reasonable accommodation to use our search tools and/or apply for a career opportunity review Accessibility at Citi. View Citi's EEO Policy Statement and the Know Your Rights poster.
Our client is looking for a Product Assurance Manager to join them on a permanent basis. As the Product Assurance Manager, you will be ensuring projects meet their objectives in a safe and reliable way. In this role you will ensure that delivered hardware meets contractual, regulatory, and internal requirements while enabling informed trade-offs on cost, schedule, and technical risk through evidence-based assurance Role: Product Assurance Manager Location: Oxfordshire Hours: Full Time Salary: Discussed Upon Application What you'll be doing: Own the Non-Conformance review (NCR) process by facilitating the identification, correction, and prevention of non-conformances Chair PA boards and gate reviews, e.g. design, assembly, test, and readiness reviews Manage project configuration activities such as approving changes and producing as designed/as built configuration lists Own the delivery of project PA documentation, e.g. PA plan, Declared Lists, Requests for Waiver/Deviation, CoC, etc. Perform or approve all project/product inspections (incoming inspection, Key/Mandatory Inspection points, final inspections) Provide PA monitoring and support of production activities - review of manufacturing, assembly, integration and test procedures, observe on-site activities. Supply chain development via supplier audits and inspection activities Support business development team with required PA input for new bids Continuous improvement of the QMS Collect, evaluate, and disseminate quality-related KPIs for the prevention of problems Conduct internal audits as required Complete any other tasks as commensurate with the level and nature of the post as delegated by the line manager or management team Ensure project deliverables are in line with project PA plan Where appropriate, provide training related to Product Assurance methods and procedures Essential Requirements: Bachelor's or Master's degree-level in relevant subject or HNC minimum with relevant experience Experience in Product Assurance and/or Quality Assurance, preferably in the Space or Aerospace domain, or another highly regulated sector Knowledge and understanding of ECSS (or equivalent) and lean commercial PA / QA approaches Good understanding of mechanical, thermal and radiation tolerance properties of materials and their practical implementation Demonstrate a common sense/pragmatic and logical approach to problem solving Ability to find simple solutions to complex problems Root cause analysis Excellent use of Windows 10 and MS Office, including Outlook, PowerPoint, Word, Excel. Excellent technical English written/verbal communication and presentation skills Comfortable working with and adapting to new IT systems and software Excellent team player with good interpersonal skills to build relationships A practical and positive attitude to new and challenging situations. Self-starter, responsive, acts as soon as issues get identified Takes ownership of a problem from start to finish, presenting findings and solutions. Produces outputs of good quality, with attention to detail. Ability to work within defined timescales to meet programme milestones Ability to work on several projects/tasks Driven by technical challenges, problem solving and practical implementation of new ideas Good judgement to make sound decisions within the role's parameters Desirable Requirements: Internal auditor experience and/or familiarity with ISO 9001. Experience delivering projects against ECSS & MIL standards Hands-on practical experience in mechanical or RF engineering fields Knowledge of configuration management Advanced knowledge of MS Excel (functions, pivot tables, macros, conditional formatting, charts, etc.) Experience with MS Visio Benefits: 28 days holiday + Bank Holidays Yearly Bonus Pension Contribution EAP Assistance Discounted Gym Membership Flexible working subject to role
May 15, 2026
Full time
Our client is looking for a Product Assurance Manager to join them on a permanent basis. As the Product Assurance Manager, you will be ensuring projects meet their objectives in a safe and reliable way. In this role you will ensure that delivered hardware meets contractual, regulatory, and internal requirements while enabling informed trade-offs on cost, schedule, and technical risk through evidence-based assurance Role: Product Assurance Manager Location: Oxfordshire Hours: Full Time Salary: Discussed Upon Application What you'll be doing: Own the Non-Conformance review (NCR) process by facilitating the identification, correction, and prevention of non-conformances Chair PA boards and gate reviews, e.g. design, assembly, test, and readiness reviews Manage project configuration activities such as approving changes and producing as designed/as built configuration lists Own the delivery of project PA documentation, e.g. PA plan, Declared Lists, Requests for Waiver/Deviation, CoC, etc. Perform or approve all project/product inspections (incoming inspection, Key/Mandatory Inspection points, final inspections) Provide PA monitoring and support of production activities - review of manufacturing, assembly, integration and test procedures, observe on-site activities. Supply chain development via supplier audits and inspection activities Support business development team with required PA input for new bids Continuous improvement of the QMS Collect, evaluate, and disseminate quality-related KPIs for the prevention of problems Conduct internal audits as required Complete any other tasks as commensurate with the level and nature of the post as delegated by the line manager or management team Ensure project deliverables are in line with project PA plan Where appropriate, provide training related to Product Assurance methods and procedures Essential Requirements: Bachelor's or Master's degree-level in relevant subject or HNC minimum with relevant experience Experience in Product Assurance and/or Quality Assurance, preferably in the Space or Aerospace domain, or another highly regulated sector Knowledge and understanding of ECSS (or equivalent) and lean commercial PA / QA approaches Good understanding of mechanical, thermal and radiation tolerance properties of materials and their practical implementation Demonstrate a common sense/pragmatic and logical approach to problem solving Ability to find simple solutions to complex problems Root cause analysis Excellent use of Windows 10 and MS Office, including Outlook, PowerPoint, Word, Excel. Excellent technical English written/verbal communication and presentation skills Comfortable working with and adapting to new IT systems and software Excellent team player with good interpersonal skills to build relationships A practical and positive attitude to new and challenging situations. Self-starter, responsive, acts as soon as issues get identified Takes ownership of a problem from start to finish, presenting findings and solutions. Produces outputs of good quality, with attention to detail. Ability to work within defined timescales to meet programme milestones Ability to work on several projects/tasks Driven by technical challenges, problem solving and practical implementation of new ideas Good judgement to make sound decisions within the role's parameters Desirable Requirements: Internal auditor experience and/or familiarity with ISO 9001. Experience delivering projects against ECSS & MIL standards Hands-on practical experience in mechanical or RF engineering fields Knowledge of configuration management Advanced knowledge of MS Excel (functions, pivot tables, macros, conditional formatting, charts, etc.) Experience with MS Visio Benefits: 28 days holiday + Bank Holidays Yearly Bonus Pension Contribution EAP Assistance Discounted Gym Membership Flexible working subject to role
Description A senior engineering leader who is responsible for the technical health, delivery performance, and professional development of their team. The Tech Lead is the primary engineering owner for one or more teams - setting technical direction, building culture, and bridging the gap between engineering and the broader organisation. Tech Leads are expected to actively drive AI-native culture within their team and model best practice for everyone they manage. The step from Technical Project Lead to Tech Lead is the most significant transition in the engineering career path. The TPL role is delivery-focused; the Tech Lead role adds sustained people leadership, team design, and function-level accountability. You are no longer primarily measured by what you build or what your project delivers - you are measured by the health and capability of your team over time. This means investing in people who may not yet be performing, having difficult conversations, and sometimes slowing down delivery to get the team architecture right. It is a fundamentally different role, and the instincts that made you a great TPL will need to evolve. Hands-on contribution remains significant. Approximately 60% of time is spent on direct technical work - coding, design, review, and architectural decision-making - and 40% on line management, stakeholder communication, hiring, and engineering strategy. This reflects Ignite's current scale and the importance of Tech Lead technical credibility. Responsibilities Own the technical health of one or more delivery teams: architecture, standards, quality, and culture Line manage up to 6 engineers directly or up to 10 indirectly, including regular 1:1s, objective setting, development support, and performance management Make or delegate architectural decisions with confidence, maintaining long-term codebase coherence Balance hands-on technical contribution with management and leadership responsibilities Drive quality and delivery standards across the team, setting clear expectations and holding them consistently Contribute to sprint planning and prioritisation alongside the Programme Manager and Analysts Lead incident response for the team, ensuring post-mortems produce systemic improvements and address root causes Represent engineering in stakeholder conversations, communicating clearly on delivery status, technical risk, and capacity Partner with the Head of Engineering on resourcing, team design, and delivery strategy Contribute to hiring by defining role requirements, leading technical interviews, and making recommendations Support the development of Senior Engineers towards greater leadership capability Operate with commercial awareness, understanding the revenue and margin implications of technical decisions Contribute to cross-function engineering strategy and platform-wide architectural decisions Develop or contribute to the Ignite repeatability and AI-native agenda Contribute to hiring strategy and team design conversations with the Head of Engineering Carry full line management responsibility for direct reports, including probation management and formal performance processes Support pay review and promotion recommendations to the Head of Engineering Manage indirect accountability for QA leads and their reports within the Ignite structure AI Leadership Responsibilities Actively use and champion coding harnesses, building team-level harnesses that standardize AI usage for common tasks Understand AI agents at an implementation level, including design, risks, and appropriate usage Understand and work with skills as reusable AI capabilities Have a strong working knowledge of MCP (Model Context Protocol), including tool access, context management, and security implications Set expectations for AI tool use within the team, defining what is encouraged, what requires review, and where human verification is required Stay current with the AI tooling landscape and share relevant developments with the Head of Engineering Qualifications Languages: TypeScript and C#/.NET (sufficient depth to review and guide work in both stacks) Frontend: Vue.js (Customer Portal stack - review and governance level) Databases: SQL Server, PostgreSQL (design, performance, governance) Cloud & Infrastructure: Azure (architecture, cost management, security posture) Container Orchestration: Kubernetes (operational and governance level) CI/CD: GitHub Actions, GitOps (ownership and governance) Security: ISO 27001 controls implementation and penetration test coordination Tooling: Linear, Git/GitHub, Copilot, monitoring and alerting platforms
May 15, 2026
Full time
Description A senior engineering leader who is responsible for the technical health, delivery performance, and professional development of their team. The Tech Lead is the primary engineering owner for one or more teams - setting technical direction, building culture, and bridging the gap between engineering and the broader organisation. Tech Leads are expected to actively drive AI-native culture within their team and model best practice for everyone they manage. The step from Technical Project Lead to Tech Lead is the most significant transition in the engineering career path. The TPL role is delivery-focused; the Tech Lead role adds sustained people leadership, team design, and function-level accountability. You are no longer primarily measured by what you build or what your project delivers - you are measured by the health and capability of your team over time. This means investing in people who may not yet be performing, having difficult conversations, and sometimes slowing down delivery to get the team architecture right. It is a fundamentally different role, and the instincts that made you a great TPL will need to evolve. Hands-on contribution remains significant. Approximately 60% of time is spent on direct technical work - coding, design, review, and architectural decision-making - and 40% on line management, stakeholder communication, hiring, and engineering strategy. This reflects Ignite's current scale and the importance of Tech Lead technical credibility. Responsibilities Own the technical health of one or more delivery teams: architecture, standards, quality, and culture Line manage up to 6 engineers directly or up to 10 indirectly, including regular 1:1s, objective setting, development support, and performance management Make or delegate architectural decisions with confidence, maintaining long-term codebase coherence Balance hands-on technical contribution with management and leadership responsibilities Drive quality and delivery standards across the team, setting clear expectations and holding them consistently Contribute to sprint planning and prioritisation alongside the Programme Manager and Analysts Lead incident response for the team, ensuring post-mortems produce systemic improvements and address root causes Represent engineering in stakeholder conversations, communicating clearly on delivery status, technical risk, and capacity Partner with the Head of Engineering on resourcing, team design, and delivery strategy Contribute to hiring by defining role requirements, leading technical interviews, and making recommendations Support the development of Senior Engineers towards greater leadership capability Operate with commercial awareness, understanding the revenue and margin implications of technical decisions Contribute to cross-function engineering strategy and platform-wide architectural decisions Develop or contribute to the Ignite repeatability and AI-native agenda Contribute to hiring strategy and team design conversations with the Head of Engineering Carry full line management responsibility for direct reports, including probation management and formal performance processes Support pay review and promotion recommendations to the Head of Engineering Manage indirect accountability for QA leads and their reports within the Ignite structure AI Leadership Responsibilities Actively use and champion coding harnesses, building team-level harnesses that standardize AI usage for common tasks Understand AI agents at an implementation level, including design, risks, and appropriate usage Understand and work with skills as reusable AI capabilities Have a strong working knowledge of MCP (Model Context Protocol), including tool access, context management, and security implications Set expectations for AI tool use within the team, defining what is encouraged, what requires review, and where human verification is required Stay current with the AI tooling landscape and share relevant developments with the Head of Engineering Qualifications Languages: TypeScript and C#/.NET (sufficient depth to review and guide work in both stacks) Frontend: Vue.js (Customer Portal stack - review and governance level) Databases: SQL Server, PostgreSQL (design, performance, governance) Cloud & Infrastructure: Azure (architecture, cost management, security posture) Container Orchestration: Kubernetes (operational and governance level) CI/CD: GitHub Actions, GitOps (ownership and governance) Security: ISO 27001 controls implementation and penetration test coordination Tooling: Linear, Git/GitHub, Copilot, monitoring and alerting platforms
C# Software Developer Energy Sector Experience Essential Are you a talented C# Software Developer with proven experience delivering software solutions within the energy sector? Our client, an established software group working across energy, AI, and technology-led industries, is looking for a strong C# Software Developer who can demonstrate a consistent track record of delivering complex, long-term projects aligned to the kind of work their teams undertake. This is an opportunity to join a collaborative engineering environment where you will help design, build, and enhance scalable cloud-based applications used by both growing startups and established global organisations. The successful candidate must have hands-on experience working on ongoing energy industry projects and be able to demonstrate delivery across enterprise-scale or business-critical platforms. Key Responsibilities Develop, maintain, and enhance applications using ASP.NET MVC and C# Deliver scalable, secure, cloud-based solutions within energy-focused environments Work with Postgres and Azure SQL to optimise database performance and structure Build and maintain serverless applications using Azure Functions Support and improve CI/CD pipelines using Azure DevOps Collaborate closely with senior developers, DevOps engineers, QA teams, and stakeholders Participate in code reviews, testing, and continuous improvement initiatives Contribute to architectural discussions and technical decision-making Work across long-term, continuous delivery projects with evolving client requirements Essential Skills & Experience Strong background in ASP.NET MVC and C# Proven experience delivering projects within the energy sector Evidence of working on ongoing, business-critical software projects similar to enterprise delivery environments Strong experience with Postgres and/or Azure SQL Experience with Azure cloud services, including Azure Functions Solid understanding of CI/CD processes, ideally using Azure DevOps Strong problem-solving and analytical skills Excellent communication and stakeholder engagement skills Ability to work effectively within Agile development teams Desirable / Nice-to-Have Skills Experience with Azure App Services and Azure Service Bus Experience working within Agile environments (Scrum/Kanban) Knowledge of front-end technologies including HTML, CSS, and JavaScript Experience working on data-heavy or operational systems within utilities or infrastructure sectors Benefits 34 days holiday plus extended Christmas shutdown Pension scheme Flexible hybrid/remote working Long-term career progression opportunities Ongoing training and professional development Supportive and collaborative team environment If you are a passionate C# Software Developer with strong energy sector experience and a track record of delivering impactful long-term projects, we would love to hear from you. Interested? Click Apply Now! C# Software Developer Energy Sector Experience Essential
May 14, 2026
Full time
C# Software Developer Energy Sector Experience Essential Are you a talented C# Software Developer with proven experience delivering software solutions within the energy sector? Our client, an established software group working across energy, AI, and technology-led industries, is looking for a strong C# Software Developer who can demonstrate a consistent track record of delivering complex, long-term projects aligned to the kind of work their teams undertake. This is an opportunity to join a collaborative engineering environment where you will help design, build, and enhance scalable cloud-based applications used by both growing startups and established global organisations. The successful candidate must have hands-on experience working on ongoing energy industry projects and be able to demonstrate delivery across enterprise-scale or business-critical platforms. Key Responsibilities Develop, maintain, and enhance applications using ASP.NET MVC and C# Deliver scalable, secure, cloud-based solutions within energy-focused environments Work with Postgres and Azure SQL to optimise database performance and structure Build and maintain serverless applications using Azure Functions Support and improve CI/CD pipelines using Azure DevOps Collaborate closely with senior developers, DevOps engineers, QA teams, and stakeholders Participate in code reviews, testing, and continuous improvement initiatives Contribute to architectural discussions and technical decision-making Work across long-term, continuous delivery projects with evolving client requirements Essential Skills & Experience Strong background in ASP.NET MVC and C# Proven experience delivering projects within the energy sector Evidence of working on ongoing, business-critical software projects similar to enterprise delivery environments Strong experience with Postgres and/or Azure SQL Experience with Azure cloud services, including Azure Functions Solid understanding of CI/CD processes, ideally using Azure DevOps Strong problem-solving and analytical skills Excellent communication and stakeholder engagement skills Ability to work effectively within Agile development teams Desirable / Nice-to-Have Skills Experience with Azure App Services and Azure Service Bus Experience working within Agile environments (Scrum/Kanban) Knowledge of front-end technologies including HTML, CSS, and JavaScript Experience working on data-heavy or operational systems within utilities or infrastructure sectors Benefits 34 days holiday plus extended Christmas shutdown Pension scheme Flexible hybrid/remote working Long-term career progression opportunities Ongoing training and professional development Supportive and collaborative team environment If you are a passionate C# Software Developer with strong energy sector experience and a track record of delivering impactful long-term projects, we would love to hear from you. Interested? Click Apply Now! C# Software Developer Energy Sector Experience Essential
Electronics Test Engineer - Exeter - Salary: 40,000 - 50,000 - Permanent About the role: Hands-on Electronics Test Engineer role supporting the development, testing, and validation of low-voltage (12-24V) electronic products. The position sits between design and QA, focusing on PCB fault-finding, prototype testing, and product verification. A practical, workshop-based role with direct impact on product reliability and improvement. Why join the team: Hands-on, workshop-based role focused on real-world testing and fault-finding Direct impact on product quality, reliability, and design improvements Broad exposure to low-voltage power electronics (12-24V systems, charging, control circuits) Opportunity to influence product development from prototype through to production Chance to help build and shape internal electronics capability within a growing engineering team What you'll be doing: Product Development & Test Support Build, modify, and test electronic prototypes and pre-production units Develop and execute functional and performance tests on PCB assemblies Analyse low-voltage circuits including power regulation, charging systems, and control electronics Interpret schematics, PCB layouts, and BOMs Identify design weaknesses and work with product teams to support iterative improvements Testing, Diagnostics & Quality Assurance Conduct verification and validation testing against product requirements Perform PCB and component-level fault diagnosis, including production and field failures Investigate failures from production, endurance, and field returns Support root cause analysis, corrective actions (CAPA), and pre-compliance test What you need: Strong hands-on electronics experience with low-voltage (12-24V) systems Proven PCB fault-finding and component-level diagnostic skills Ability to interpret schematics, PCB layouts, and technical BOMs Experience using test equipment (multimeters, oscilloscopes, power supplies, electronic loads) HNC/HND (or equivalent) in Electrical/Electronic Engineering with mid-level engineering experience What next? If you're interested in this opportunity, please submit your CV outlining your relevant experience and technical expertise for consideration.
May 14, 2026
Full time
Electronics Test Engineer - Exeter - Salary: 40,000 - 50,000 - Permanent About the role: Hands-on Electronics Test Engineer role supporting the development, testing, and validation of low-voltage (12-24V) electronic products. The position sits between design and QA, focusing on PCB fault-finding, prototype testing, and product verification. A practical, workshop-based role with direct impact on product reliability and improvement. Why join the team: Hands-on, workshop-based role focused on real-world testing and fault-finding Direct impact on product quality, reliability, and design improvements Broad exposure to low-voltage power electronics (12-24V systems, charging, control circuits) Opportunity to influence product development from prototype through to production Chance to help build and shape internal electronics capability within a growing engineering team What you'll be doing: Product Development & Test Support Build, modify, and test electronic prototypes and pre-production units Develop and execute functional and performance tests on PCB assemblies Analyse low-voltage circuits including power regulation, charging systems, and control electronics Interpret schematics, PCB layouts, and BOMs Identify design weaknesses and work with product teams to support iterative improvements Testing, Diagnostics & Quality Assurance Conduct verification and validation testing against product requirements Perform PCB and component-level fault diagnosis, including production and field failures Investigate failures from production, endurance, and field returns Support root cause analysis, corrective actions (CAPA), and pre-compliance test What you need: Strong hands-on electronics experience with low-voltage (12-24V) systems Proven PCB fault-finding and component-level diagnostic skills Ability to interpret schematics, PCB layouts, and technical BOMs Experience using test equipment (multimeters, oscilloscopes, power supplies, electronic loads) HNC/HND (or equivalent) in Electrical/Electronic Engineering with mid-level engineering experience What next? If you're interested in this opportunity, please submit your CV outlining your relevant experience and technical expertise for consideration.
Senior C++ Developer (Hybrid, UK-Based) Location: London Salary : £80,000 - £100,000 + EMI Share Options + Private Medical Insurance Vacancy Type: Full-time, Permanent We take care of time, so our customers don t have to. At Hoptroff, we build nanosecond-accurate, software-driven timing systems used by global investment banks, telecoms operators, and broadcasters - including the MiFID II-compliant trade timestamping that financial regulators depend on. When microseconds aren t tight enough and milliseconds are an eternity, our software is what s keeping the world in sync. We re entering an exciting phase of growth and looking for a Senior C++ Developer to join our small, high-calibre engineering team. You ll write modern C++ (C+ or later) at the heart of our Linux-based clock and time synchronisation platform - tight, performance-sensitive code where jitter is measured in nanoseconds and correctness is non-negotiable. You ll own significant components of the platform, contribute to architecture, and work closely alongside a junior developer and a contractor on a tight, collaborative team. The Role Reporting to the Software Development Manager, you ll lead the design, development, and optimisation of C++ software within our Linux-based timing systems. Day to day, you will: Design, build, and optimise low-latency, high-precision C++ at the heart of our timing products - code where performance, determinism, and jitter really matter Make architectural decisions on systems that have to be correct, fast, and observable in production - balancing maintainability with the hard real-time constraints of precision timing Develop online and offline tooling to support time synchronisation and system monitoring Build and maintain automated test cases using Python-based system test frameworks Provide senior-level technical input across product, QA, hardware, and commercial conversations Share knowledge, review code, and support the development of our junior C++ developer Help shape engineering standards, tooling, and processes Essential Experience Extensive professional experience writing modern C++ in production - fluent in modern C++ idioms and confident with C+/23 features such as concepts, ranges, coroutines, and constant expressions (constexpr/consteval) A track record of delivering low-latency, performance-sensitive systems on Linux - production code where determinism, throughput, and tail latency matter Strong computer science fundamentals: data structures, algorithms, concurrency, performance optimisation Demonstrable ability to design software architecture and make sound technical trade-offs Strong debugging and profiling skills (perf, valgrind, sanitizers, flame graphs) - you ve cared about cache lines, lock contention, jitter, and tail latency, not just correctness Confident with Git, CI/CD pipelines, modern build tooling (CMake), and automated testing frameworks Clear technical communicator - you can explain trade-offs to engineers and non-engineers alike Nice to Have Linux networking experience (sockets, networking concepts and standard tooling) Experience interacting with hardware on Linux (device drivers, system interfaces, low-level I/O) Low-level Windows systems development (Windows APIs, system services, platform-specific debugging) PostgreSQL or other relational database experience Python and/or Go (Golang) for tooling, automation, or supporting services Familiarity with time synchronisation protocols such as PTP or NTP Open-source contributions or evidence of staying current with the C++ standard Open to integrating AI tools where they add value What We Offer Salary of £80,000 - £100,000, depending on experience EMI Share Options Private Medical Insurance Hybrid working - 2 days per week at our London (Shoreditch) office, with regular team events Based at a Shoreditch FinTech incubator - a thriving community of like-minded businesses with a full social calendar, networking opportunities, and (importantly) dog-friendly Your code will sit underneath MiFID II-compliant trade timestamps at major banks, broadcast sync at tier-1 broadcasters, and timing infrastructure at telecoms operators - tangible, high-stakes impact at global scale A team that invests in modern tooling and continuous learning To Apply If you feel you are a suitable candidate and would like to work for HopTroff, please do not hesitate to apply.
May 14, 2026
Full time
Senior C++ Developer (Hybrid, UK-Based) Location: London Salary : £80,000 - £100,000 + EMI Share Options + Private Medical Insurance Vacancy Type: Full-time, Permanent We take care of time, so our customers don t have to. At Hoptroff, we build nanosecond-accurate, software-driven timing systems used by global investment banks, telecoms operators, and broadcasters - including the MiFID II-compliant trade timestamping that financial regulators depend on. When microseconds aren t tight enough and milliseconds are an eternity, our software is what s keeping the world in sync. We re entering an exciting phase of growth and looking for a Senior C++ Developer to join our small, high-calibre engineering team. You ll write modern C++ (C+ or later) at the heart of our Linux-based clock and time synchronisation platform - tight, performance-sensitive code where jitter is measured in nanoseconds and correctness is non-negotiable. You ll own significant components of the platform, contribute to architecture, and work closely alongside a junior developer and a contractor on a tight, collaborative team. The Role Reporting to the Software Development Manager, you ll lead the design, development, and optimisation of C++ software within our Linux-based timing systems. Day to day, you will: Design, build, and optimise low-latency, high-precision C++ at the heart of our timing products - code where performance, determinism, and jitter really matter Make architectural decisions on systems that have to be correct, fast, and observable in production - balancing maintainability with the hard real-time constraints of precision timing Develop online and offline tooling to support time synchronisation and system monitoring Build and maintain automated test cases using Python-based system test frameworks Provide senior-level technical input across product, QA, hardware, and commercial conversations Share knowledge, review code, and support the development of our junior C++ developer Help shape engineering standards, tooling, and processes Essential Experience Extensive professional experience writing modern C++ in production - fluent in modern C++ idioms and confident with C+/23 features such as concepts, ranges, coroutines, and constant expressions (constexpr/consteval) A track record of delivering low-latency, performance-sensitive systems on Linux - production code where determinism, throughput, and tail latency matter Strong computer science fundamentals: data structures, algorithms, concurrency, performance optimisation Demonstrable ability to design software architecture and make sound technical trade-offs Strong debugging and profiling skills (perf, valgrind, sanitizers, flame graphs) - you ve cared about cache lines, lock contention, jitter, and tail latency, not just correctness Confident with Git, CI/CD pipelines, modern build tooling (CMake), and automated testing frameworks Clear technical communicator - you can explain trade-offs to engineers and non-engineers alike Nice to Have Linux networking experience (sockets, networking concepts and standard tooling) Experience interacting with hardware on Linux (device drivers, system interfaces, low-level I/O) Low-level Windows systems development (Windows APIs, system services, platform-specific debugging) PostgreSQL or other relational database experience Python and/or Go (Golang) for tooling, automation, or supporting services Familiarity with time synchronisation protocols such as PTP or NTP Open-source contributions or evidence of staying current with the C++ standard Open to integrating AI tools where they add value What We Offer Salary of £80,000 - £100,000, depending on experience EMI Share Options Private Medical Insurance Hybrid working - 2 days per week at our London (Shoreditch) office, with regular team events Based at a Shoreditch FinTech incubator - a thriving community of like-minded businesses with a full social calendar, networking opportunities, and (importantly) dog-friendly Your code will sit underneath MiFID II-compliant trade timestamps at major banks, broadcast sync at tier-1 broadcasters, and timing infrastructure at telecoms operators - tangible, high-stakes impact at global scale A team that invests in modern tooling and continuous learning To Apply If you feel you are a suitable candidate and would like to work for HopTroff, please do not hesitate to apply.
NDT Technician (Level 2 Radiographer) Location: Chalgrove, Oxfordshire Salary: Competitive + Annual Bonus + Industry-Leading Benefits Core Hours: Mon Thu (Full Day), Friday Midday Finish "Precision saves lives in aerospace safety. The Mission At Martin-Baker, we don t just manufacture aerospace components; we build the world s most trusted ejection seats. To date, our technology has saved over 7,700 lives. In this role, your expertise in Non-Destructive Testing (NDT) isn't just a quality check it is the final line of defence for aircrew around the globe. The Opportunity Based at our specialist site in Chalgrove, you will join an elite inspection team focusing on high-integrity digital X-Ray and NDT processes. We are looking for a certified Level 2 Radiographer (NAS410/EN4179) who thrives in an environment where "near enough" is never good enough. What You ll Do Expert Inspection: Capture and interpret high-resolution digital X-Ray images to identify structural irregularities in mission-critical components. Specialist Testing: Utilise helium leak testing and mass spectrometry to ensure absolute integrity. Data Integrity: Maintain meticulous records of test data, ensuring 100% traceability via SAP. Collaborate: Work closely with QA, Engineering, and Production teams to uphold our world-class quality standards. Continuous Improvement: Contribute to 5S initiatives and help refine our cutting-edge inspection processes. What We re Looking For Certification: Current NDT Level 2 Radiographer certification (NAS410 or EN4179). Experience: A proven track record in industrial X-Ray/NDT within Aerospace, Defence, or Automotive sectors. (Note: Medical radiography backgrounds are not suitable for this technical role). Technical Literacy: Ability to read complex engineering drawings and a proficiency with digital X-Ray systems and SAP. The Mindset: A self-starter with an uncompromising eye for detail and the ability to work autonomously. Why Join Martin-Baker? We value our people as much as our mission. Our benefits package is designed to support your life both inside and outside the lab: Unbeatable Work-Life Balance: Your weekend starts at 12:15 pm every Friday. Financial Security: A 9% non-contributory pension and 4x Life Assurance. Health & Wellbeing: Healthcare Cash Plan, nursery benefits, and the option to buy extra annual leave. Rewarding Excellence: Annual bonus scheme and exclusive discounts via the Martin-Baker+ platform. Future-Proof Your Career: A personalised training and development plan to help you grow with the global leader. The Selection Process Discovery Call: A deep-dive telephone interview with your Recruitment Business Partner. On-Site Interview: A formal discussion with the Hiring Manager and a practical Trade Test to showcase your technical expertise. Ready to join the team that saves lives? Click Apply now Note: This role requires BPSS security clearance. Applicants must have the existing right to work and reside in the UK.
May 14, 2026
Full time
NDT Technician (Level 2 Radiographer) Location: Chalgrove, Oxfordshire Salary: Competitive + Annual Bonus + Industry-Leading Benefits Core Hours: Mon Thu (Full Day), Friday Midday Finish "Precision saves lives in aerospace safety. The Mission At Martin-Baker, we don t just manufacture aerospace components; we build the world s most trusted ejection seats. To date, our technology has saved over 7,700 lives. In this role, your expertise in Non-Destructive Testing (NDT) isn't just a quality check it is the final line of defence for aircrew around the globe. The Opportunity Based at our specialist site in Chalgrove, you will join an elite inspection team focusing on high-integrity digital X-Ray and NDT processes. We are looking for a certified Level 2 Radiographer (NAS410/EN4179) who thrives in an environment where "near enough" is never good enough. What You ll Do Expert Inspection: Capture and interpret high-resolution digital X-Ray images to identify structural irregularities in mission-critical components. Specialist Testing: Utilise helium leak testing and mass spectrometry to ensure absolute integrity. Data Integrity: Maintain meticulous records of test data, ensuring 100% traceability via SAP. Collaborate: Work closely with QA, Engineering, and Production teams to uphold our world-class quality standards. Continuous Improvement: Contribute to 5S initiatives and help refine our cutting-edge inspection processes. What We re Looking For Certification: Current NDT Level 2 Radiographer certification (NAS410 or EN4179). Experience: A proven track record in industrial X-Ray/NDT within Aerospace, Defence, or Automotive sectors. (Note: Medical radiography backgrounds are not suitable for this technical role). Technical Literacy: Ability to read complex engineering drawings and a proficiency with digital X-Ray systems and SAP. The Mindset: A self-starter with an uncompromising eye for detail and the ability to work autonomously. Why Join Martin-Baker? We value our people as much as our mission. Our benefits package is designed to support your life both inside and outside the lab: Unbeatable Work-Life Balance: Your weekend starts at 12:15 pm every Friday. Financial Security: A 9% non-contributory pension and 4x Life Assurance. Health & Wellbeing: Healthcare Cash Plan, nursery benefits, and the option to buy extra annual leave. Rewarding Excellence: Annual bonus scheme and exclusive discounts via the Martin-Baker+ platform. Future-Proof Your Career: A personalised training and development plan to help you grow with the global leader. The Selection Process Discovery Call: A deep-dive telephone interview with your Recruitment Business Partner. On-Site Interview: A formal discussion with the Hiring Manager and a practical Trade Test to showcase your technical expertise. Ready to join the team that saves lives? Click Apply now Note: This role requires BPSS security clearance. Applicants must have the existing right to work and reside in the UK.
This position is not suitable for a person who has allergies to materials such as glue, resins, oils, grease and hydraulic fluids. The role involves working with magnets or being in and around magnetic fields and heavy lifting. Responsibilities Skills Manual dexterity, soldering, crimp and use of general hand assembly tools. Read, interpret and work from engineering drawings, method sheets or samples. Use of process materials including resins, glues and curing systems and/or agents. Use of computerised assembly, test and stock control systems & peripheral equipment. Assembly of optical units, wiring looms, cables, electro mechanical assemblies and finished products adhering to Company documentation and to agreed QA standards. Ensure that the integrity and quality of the materials used in the process meet the required standards. Testing & Packing Test or calibration of assemblies using a range of Company bespoke processes; PC based, mechanical and manually operated equipment. Ensure the integrity & quality of the product passed to the next stage of the process. Packing operations ranging from bagging and labelling individual items to site kits containing multiple products and accessories into bespoke carry cases. General Working in all areas of production using a range of different processes. Handling process materials safely to prevent degradation. Health & Safety Comply with Company H&S procedures and legislation at all times. Identify any hazards, make safe and report as per Company H&S procedures. Ensure correct use and storage of PPE and RPE. Any additional duties deemed appropriate which are within the job holders capabilities. About You Assembly, test, packing and material handling processes. Optical assembly or detailed fine assembly work. Computer based processes. Mechanical and electronic processes. Use of documentation (bill of materials, assembly drawings). Health & Safety Working within a disciplined ISO9001 environment. Skills Good organisational skills. Ability to work on own initiative and to strict timescales. IT literate, good working knowledge of MS Excel, Word and Outlook. Company Competencies Communicating and Influencing Level 1. Drive and Determination Level 1. Problem Solving/Initiative Level 2. Technical/Functional Excellence Level 2. Planning and Business Performance Level 1. Skills Good organisational skills. Ability to work on own initiative and to strict timescales. IT literate, good working knowledge of MS Excel, Word and Outlook.
May 14, 2026
Full time
This position is not suitable for a person who has allergies to materials such as glue, resins, oils, grease and hydraulic fluids. The role involves working with magnets or being in and around magnetic fields and heavy lifting. Responsibilities Skills Manual dexterity, soldering, crimp and use of general hand assembly tools. Read, interpret and work from engineering drawings, method sheets or samples. Use of process materials including resins, glues and curing systems and/or agents. Use of computerised assembly, test and stock control systems & peripheral equipment. Assembly of optical units, wiring looms, cables, electro mechanical assemblies and finished products adhering to Company documentation and to agreed QA standards. Ensure that the integrity and quality of the materials used in the process meet the required standards. Testing & Packing Test or calibration of assemblies using a range of Company bespoke processes; PC based, mechanical and manually operated equipment. Ensure the integrity & quality of the product passed to the next stage of the process. Packing operations ranging from bagging and labelling individual items to site kits containing multiple products and accessories into bespoke carry cases. General Working in all areas of production using a range of different processes. Handling process materials safely to prevent degradation. Health & Safety Comply with Company H&S procedures and legislation at all times. Identify any hazards, make safe and report as per Company H&S procedures. Ensure correct use and storage of PPE and RPE. Any additional duties deemed appropriate which are within the job holders capabilities. About You Assembly, test, packing and material handling processes. Optical assembly or detailed fine assembly work. Computer based processes. Mechanical and electronic processes. Use of documentation (bill of materials, assembly drawings). Health & Safety Working within a disciplined ISO9001 environment. Skills Good organisational skills. Ability to work on own initiative and to strict timescales. IT literate, good working knowledge of MS Excel, Word and Outlook. Company Competencies Communicating and Influencing Level 1. Drive and Determination Level 1. Problem Solving/Initiative Level 2. Technical/Functional Excellence Level 2. Planning and Business Performance Level 1. Skills Good organisational skills. Ability to work on own initiative and to strict timescales. IT literate, good working knowledge of MS Excel, Word and Outlook.
Head of Engineering and QA - Hybrid working. London 80-95k with great benefits We're looking for an experienced Engineering Manager with strong QA knowledge to lead delivery across multiple product squads within a complex, evolving technology environment. This is a strategic leadership role suited to someone who thrives on shaping engineering practices, improving quality standards, and bringing structure to fragmented delivery ecosystems. The Role As part of a senior delivery leadership team, you will oversee engineering and quality assurance across three squads. You'll be responsible for directing external engineering partners while establishing strong internal standards, ensuring alignment with architecture, and driving continuous improvement across the development lifecycle. Key Responsibilities Lead and coordinate external engineering suppliers across a diverse, multi-technology landscape Establish and embed engineering and QA best practices across teams Define and implement a modern CI/CD pipeline, incorporating automated testing Assess and introduce AI-powered development tools to enhance team productivity Collaborate closely with architecture leadership to ensure technical alignment and coherence Bring structure and consistency to tooling and processes in a previously fragmented environment Team Environment Engineering capability is currently delivered primarily through contractors and external suppliers A small but growing internal capability, including a Dynamics subject matter expert reporting into this role QA capability includes an automation tester What We're Looking For Strong background in engineering leadership within complex delivery environments Experience working within the Microsoft ecosystem, particularly Power Platform or low-code/no-code solutions Solid understanding of test automation strategies and quality engineering principles Proven ability to bring order and governance to disjointed or "grown organically" toolsets and processes Comfortable leading through influence, particularly with external partners and distributed teams Current Focus Areas Quality assurance practices are in need of a full reassessment. While some automation exists, there is a significant opportunity to redefine the QA strategy and build a more robust, scalable approach to quality across all squads. Also a review across all engineering functions to align best practice and efficiency with future growth plans. This is a high-impact role with the opportunity to shape engineering maturity, influence technical direction, and introduce modern ways of working in a fast-moving environment. Ideally you will be in an engineering leadership role with a background in QA and Test Management. Please get in touch with your latest CV to have an informal chat.
May 13, 2026
Full time
Head of Engineering and QA - Hybrid working. London 80-95k with great benefits We're looking for an experienced Engineering Manager with strong QA knowledge to lead delivery across multiple product squads within a complex, evolving technology environment. This is a strategic leadership role suited to someone who thrives on shaping engineering practices, improving quality standards, and bringing structure to fragmented delivery ecosystems. The Role As part of a senior delivery leadership team, you will oversee engineering and quality assurance across three squads. You'll be responsible for directing external engineering partners while establishing strong internal standards, ensuring alignment with architecture, and driving continuous improvement across the development lifecycle. Key Responsibilities Lead and coordinate external engineering suppliers across a diverse, multi-technology landscape Establish and embed engineering and QA best practices across teams Define and implement a modern CI/CD pipeline, incorporating automated testing Assess and introduce AI-powered development tools to enhance team productivity Collaborate closely with architecture leadership to ensure technical alignment and coherence Bring structure and consistency to tooling and processes in a previously fragmented environment Team Environment Engineering capability is currently delivered primarily through contractors and external suppliers A small but growing internal capability, including a Dynamics subject matter expert reporting into this role QA capability includes an automation tester What We're Looking For Strong background in engineering leadership within complex delivery environments Experience working within the Microsoft ecosystem, particularly Power Platform or low-code/no-code solutions Solid understanding of test automation strategies and quality engineering principles Proven ability to bring order and governance to disjointed or "grown organically" toolsets and processes Comfortable leading through influence, particularly with external partners and distributed teams Current Focus Areas Quality assurance practices are in need of a full reassessment. While some automation exists, there is a significant opportunity to redefine the QA strategy and build a more robust, scalable approach to quality across all squads. Also a review across all engineering functions to align best practice and efficiency with future growth plans. This is a high-impact role with the opportunity to shape engineering maturity, influence technical direction, and introduce modern ways of working in a fast-moving environment. Ideally you will be in an engineering leadership role with a background in QA and Test Management. Please get in touch with your latest CV to have an informal chat.
Mobile Android QA Engineer- Rate: 250 PAYE/ 291 via an Umbrella a day Location: Hybrid 3 days/week ( London, Victoria ) YOU MUST LIVE IN THE UK - SPONSORSHIP IS NOT PROVIDED Overview- You'll be part of a Mobile Engineering team whose responsibility is to develop new products and platforms for their clients. Mobile Engineering's aim is to build interactive experiences at all touch points of a consumer's journey before and after the purchase. Job Responsibilities- Execute functional automated tests to verify the accuracy, completeness and reliability of functionality Contribute to the development and enhancement of UI automated testing frameworks built on Expresso (Android using Kotlin) Integrate automated tests into CI to identify issues during development cycle Contribute to PR reviews, submit PR's and contribute to the goal of 100% regression readiness Develop & maintain robust, scalable and reusable automated test scripts across applications Improve QA delivery through defining test strategies through coordination with multiple back-end teams Key Skills- Hands on mobile testing experience Strong Kotlin/Java experience Mobile engineering Expresso (Android) Automation skills to automate regression Tests (UI) 60% manual and 40% automation Must be able to Automate API's Make changes to QA processes Bonus- Banking/finance experience Job Title: Mobile Android QA Engineer Location: London, UK Job Type: Contract Trading as TEKsystems. Allegis Group Limited, Maxis 2, Western Road, Bracknell, RG12 1RT, United Kingdom. No. (phone number removed). Allegis Group Limited operates as an Employment Business and Employment Agency as set out in the Conduct of Employment Agencies and Employment Businesses Regulations 2003. TEKsystems is a company within the Allegis Group network of companies (collectively referred to as "Allegis Group"). Aerotek, Aston Carter, EASi, Talentis Solutions, TEKsystems, Stamford Consultants and The Stamford Group are Allegis Group brands. If you apply, your personal data will be processed as described in the Allegis Group Online Privacy Notice available at (url removed)> To access our Online Privacy Notice, which explains what information we may collect, use, share, and store about you, and describes your rights and choices about this, please go to (url removed)> We are part of a global network of companies and as a result, the personal data you provide will be shared within Allegis Group and transferred and processed outside the UK, Switzerland and European Economic Area subject to the protections described in the Allegis Group Online Privacy Notice. We store personal data in the UK, EEA, Switzerland and the USA. If you would like to exercise your privacy rights, please visit the "Contacting Us" section of our Online Privacy Notice at (url removed)/en-gb/privacy-notices for details on how to contact us. To protect your privacy and security, we may take steps to verify your identity, such as a password and user ID if there is an account associated with your request, or identifying information such as your address or date of birth, before proceeding with your request. If you are resident in the UK, EEA or Switzerland, we will process any access request you make in accordance with our commitments under the UK Data Protection Act, EU-U.S. Privacy Shield or the Swiss-U.S. Privacy Shield.
May 13, 2026
Contractor
Mobile Android QA Engineer- Rate: 250 PAYE/ 291 via an Umbrella a day Location: Hybrid 3 days/week ( London, Victoria ) YOU MUST LIVE IN THE UK - SPONSORSHIP IS NOT PROVIDED Overview- You'll be part of a Mobile Engineering team whose responsibility is to develop new products and platforms for their clients. Mobile Engineering's aim is to build interactive experiences at all touch points of a consumer's journey before and after the purchase. Job Responsibilities- Execute functional automated tests to verify the accuracy, completeness and reliability of functionality Contribute to the development and enhancement of UI automated testing frameworks built on Expresso (Android using Kotlin) Integrate automated tests into CI to identify issues during development cycle Contribute to PR reviews, submit PR's and contribute to the goal of 100% regression readiness Develop & maintain robust, scalable and reusable automated test scripts across applications Improve QA delivery through defining test strategies through coordination with multiple back-end teams Key Skills- Hands on mobile testing experience Strong Kotlin/Java experience Mobile engineering Expresso (Android) Automation skills to automate regression Tests (UI) 60% manual and 40% automation Must be able to Automate API's Make changes to QA processes Bonus- Banking/finance experience Job Title: Mobile Android QA Engineer Location: London, UK Job Type: Contract Trading as TEKsystems. Allegis Group Limited, Maxis 2, Western Road, Bracknell, RG12 1RT, United Kingdom. No. (phone number removed). Allegis Group Limited operates as an Employment Business and Employment Agency as set out in the Conduct of Employment Agencies and Employment Businesses Regulations 2003. TEKsystems is a company within the Allegis Group network of companies (collectively referred to as "Allegis Group"). Aerotek, Aston Carter, EASi, Talentis Solutions, TEKsystems, Stamford Consultants and The Stamford Group are Allegis Group brands. If you apply, your personal data will be processed as described in the Allegis Group Online Privacy Notice available at (url removed)> To access our Online Privacy Notice, which explains what information we may collect, use, share, and store about you, and describes your rights and choices about this, please go to (url removed)> We are part of a global network of companies and as a result, the personal data you provide will be shared within Allegis Group and transferred and processed outside the UK, Switzerland and European Economic Area subject to the protections described in the Allegis Group Online Privacy Notice. We store personal data in the UK, EEA, Switzerland and the USA. If you would like to exercise your privacy rights, please visit the "Contacting Us" section of our Online Privacy Notice at (url removed)/en-gb/privacy-notices for details on how to contact us. To protect your privacy and security, we may take steps to verify your identity, such as a password and user ID if there is an account associated with your request, or identifying information such as your address or date of birth, before proceeding with your request. If you are resident in the UK, EEA or Switzerland, we will process any access request you make in accordance with our commitments under the UK Data Protection Act, EU-U.S. Privacy Shield or the Swiss-U.S. Privacy Shield.
Job Title: Test Systems Software Engineer Rate: 70 per hour via Umbrella (Inside IR35) Location: Cheltenham (Onsite at least 3 days a week) Contract Length: 12 Months Role purpose On-going critical work that effects customer deliveries of ELMS panels, that needs on-going resourcing. Key Responsibilities Writing release documents Configuration control of code (in IBM ELM aka RTC) Configuration control of documentation (Windchill for Word document) Co-ordinating and leading document reviews and release tollgate meeting Co-ordinating with stakeholders any deviations or exceptions to process On-site informal verification of software and debugging On-site kicking off formal verification Hosting independent DQA Daily update to team, including proactive blocker reporting and task estimation Writing code from schematics (Automeg & C++) Qualifications / Requirements Good documentation skills. Good communication & interpersonal skills. Good problem-solving skills. Familiarity with a formal software lifecycle and documentation set. Ability to read and interpret schematics Coding skills. An ability to debug software on target hardware. Experience with formal configuration control (e.g. IBM ELM, Windchill)
May 12, 2026
Contractor
Job Title: Test Systems Software Engineer Rate: 70 per hour via Umbrella (Inside IR35) Location: Cheltenham (Onsite at least 3 days a week) Contract Length: 12 Months Role purpose On-going critical work that effects customer deliveries of ELMS panels, that needs on-going resourcing. Key Responsibilities Writing release documents Configuration control of code (in IBM ELM aka RTC) Configuration control of documentation (Windchill for Word document) Co-ordinating and leading document reviews and release tollgate meeting Co-ordinating with stakeholders any deviations or exceptions to process On-site informal verification of software and debugging On-site kicking off formal verification Hosting independent DQA Daily update to team, including proactive blocker reporting and task estimation Writing code from schematics (Automeg & C++) Qualifications / Requirements Good documentation skills. Good communication & interpersonal skills. Good problem-solving skills. Familiarity with a formal software lifecycle and documentation set. Ability to read and interpret schematics Coding skills. An ability to debug software on target hardware. Experience with formal configuration control (e.g. IBM ELM, Windchill)
Principal Security Consultant (CCSAM/CCRTM) - RTO NetSPI pioneered Penetration Testing as a Service (PTaaS) and leads the industry in modernpentesting. Combining world-class security professionals with AI and automation,NetSPIdelivers clarity, speed, and scale across 50+pentesttypes, attack surface management, and vulnerability prioritization. TheNetSPIplatform streamlines workflows and accelerates remediation, enabling our experts to focus on deep dive testing that uncovers vulnerabilities others miss. Trusted by the top 10 U.S. banks and Fortune 500 companies worldwide,NetSPIhas been driving security innovation since 2001. NetSPIis on an exciting growth journey as we disrupt and improve the proactive security market. We are looking for individuals with a collaborative, innovative, and customer-first mindset to join our team. Learn more about our award-winning workplace culture and get to know our A-Team at . Join our mission as a Principal Security Consultant. We're seeking a seasoned security professional who combines deep technical expertise in adversarial simulation with exceptional communication skills to engage both executives and technical teams with equal impact. On our globally deployed Red Team you will compromise some of the world's most sophisticated and heavily fortified networks. As an operator, you'll collaborate with industry-leading experts while wielding cutting-edge proprietary tools that set the standard for offensive security operations. In this role, you'll leverage your strategic problem-solving abilities, foster high-performance team dynamics, and drive innovative methodologies to deliver transformative engagements that consistently surpass client expectations. Responsibilities: Lead comprehensive red team operations by serving as the primary technical operator on standard adversarial engagements, where you'll strategically plan scenario execution, orchestrate team resources and timelines, and make critical technical decisions that drive successful outcomes in complex, high-stakes environments. Perform duties aligned to a red team manager and secondary operator on Regulated Red team engagements such as CBEST, TIBER, TLPT, iCAST, FEER etc. This is a dual responsibility where you will be an active operator as well as performing operational governance activities associated with this role in complex regulated red team engagements. Leverage deep technical expertise in operating systems, network architecture, and infrastructure fundamentals to execute sophisticated attack chains and navigate complex enterprise environments during red team operations. Pioneer cutting-edge offensive security capabilities in coordination with our dedicated malware and capability developers by researching, developing, and operationalizing innovative techniques, proprietary tools, and advanced methodologies that push the boundaries of adversarial simulation and red team effectiveness. Offer mentorship or coaching to growing team members, while sharing knowledge externally through blogs, webinar presentations, or presenting at conferences. Collaborate with cross-functional teams on key activities, including scoping initiatives, providing subject matter expertise in high-stakes sales presentations, and contributing strategic technical insights to marketing campaigns that showcase our capabilities. Help define, document, and continuously refine internal technical processes, service methodologies, and tactical procedures (TTPs) that standardize excellence across all engagements. Perform administrative tasks related to day-to-day consulting activities to ensure smooth business and engagement operations. Minimum Qualifications: Bachelor's degree or higher, with a focus on IT, Computer Science, Engineering or Math or equivalent experience 5+ years of work experience performing adversarial simulation related engagements Due to the nature of the role, the applicant must hold and be able to maintain a current CCRTM or CCSAM certification Familiarity with offensive tools, based on applicable skillset Deep technical familiarity with offensive and defensive IT concepts and protocols Working knowledge of Windows, Linux and MacOS operating systems internals Extensive understanding of the MITRE ATT&CK framework, OWASP Top 10, and other security frameworks Ability to work independently and as part of a team Proficient communication skills, both written and verbal Willingness to travel up to 10% minimum This position requires an 8-hour workday, with occasional evenings or weekends necessary to meet project deadlines or critical needs Preferred Qualifications: Ability to provide technical and QA oversight on the Red Team service line Experience in one or more of the following programming or scripting languages (e.g., Python, PowerShell, Perl, C, C++, C#, Java, Nim, Rust, etc.) We are an equal employment opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability status, protected veteran status or any other characteristic protected by law.
May 12, 2026
Full time
Principal Security Consultant (CCSAM/CCRTM) - RTO NetSPI pioneered Penetration Testing as a Service (PTaaS) and leads the industry in modernpentesting. Combining world-class security professionals with AI and automation,NetSPIdelivers clarity, speed, and scale across 50+pentesttypes, attack surface management, and vulnerability prioritization. TheNetSPIplatform streamlines workflows and accelerates remediation, enabling our experts to focus on deep dive testing that uncovers vulnerabilities others miss. Trusted by the top 10 U.S. banks and Fortune 500 companies worldwide,NetSPIhas been driving security innovation since 2001. NetSPIis on an exciting growth journey as we disrupt and improve the proactive security market. We are looking for individuals with a collaborative, innovative, and customer-first mindset to join our team. Learn more about our award-winning workplace culture and get to know our A-Team at . Join our mission as a Principal Security Consultant. We're seeking a seasoned security professional who combines deep technical expertise in adversarial simulation with exceptional communication skills to engage both executives and technical teams with equal impact. On our globally deployed Red Team you will compromise some of the world's most sophisticated and heavily fortified networks. As an operator, you'll collaborate with industry-leading experts while wielding cutting-edge proprietary tools that set the standard for offensive security operations. In this role, you'll leverage your strategic problem-solving abilities, foster high-performance team dynamics, and drive innovative methodologies to deliver transformative engagements that consistently surpass client expectations. Responsibilities: Lead comprehensive red team operations by serving as the primary technical operator on standard adversarial engagements, where you'll strategically plan scenario execution, orchestrate team resources and timelines, and make critical technical decisions that drive successful outcomes in complex, high-stakes environments. Perform duties aligned to a red team manager and secondary operator on Regulated Red team engagements such as CBEST, TIBER, TLPT, iCAST, FEER etc. This is a dual responsibility where you will be an active operator as well as performing operational governance activities associated with this role in complex regulated red team engagements. Leverage deep technical expertise in operating systems, network architecture, and infrastructure fundamentals to execute sophisticated attack chains and navigate complex enterprise environments during red team operations. Pioneer cutting-edge offensive security capabilities in coordination with our dedicated malware and capability developers by researching, developing, and operationalizing innovative techniques, proprietary tools, and advanced methodologies that push the boundaries of adversarial simulation and red team effectiveness. Offer mentorship or coaching to growing team members, while sharing knowledge externally through blogs, webinar presentations, or presenting at conferences. Collaborate with cross-functional teams on key activities, including scoping initiatives, providing subject matter expertise in high-stakes sales presentations, and contributing strategic technical insights to marketing campaigns that showcase our capabilities. Help define, document, and continuously refine internal technical processes, service methodologies, and tactical procedures (TTPs) that standardize excellence across all engagements. Perform administrative tasks related to day-to-day consulting activities to ensure smooth business and engagement operations. Minimum Qualifications: Bachelor's degree or higher, with a focus on IT, Computer Science, Engineering or Math or equivalent experience 5+ years of work experience performing adversarial simulation related engagements Due to the nature of the role, the applicant must hold and be able to maintain a current CCRTM or CCSAM certification Familiarity with offensive tools, based on applicable skillset Deep technical familiarity with offensive and defensive IT concepts and protocols Working knowledge of Windows, Linux and MacOS operating systems internals Extensive understanding of the MITRE ATT&CK framework, OWASP Top 10, and other security frameworks Ability to work independently and as part of a team Proficient communication skills, both written and verbal Willingness to travel up to 10% minimum This position requires an 8-hour workday, with occasional evenings or weekends necessary to meet project deadlines or critical needs Preferred Qualifications: Ability to provide technical and QA oversight on the Red Team service line Experience in one or more of the following programming or scripting languages (e.g., Python, PowerShell, Perl, C, C++, C#, Java, Nim, Rust, etc.) We are an equal employment opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability status, protected veteran status or any other characteristic protected by law.
A tech company in Lisbon is looking for a Backend QA Engineer to ensure the reliability and performance of backend systems. This fully onsite position involves collaborating with cross-functional teams and contributing to a high-quality standard in testing APIs and databases. Candidates should have 2-3 years of experience with backend technologies such as Node.js and TypeScript, as well as familiarity with testing tools like Postman and SQL databases including PostgreSQL.
May 12, 2026
Full time
A tech company in Lisbon is looking for a Backend QA Engineer to ensure the reliability and performance of backend systems. This fully onsite position involves collaborating with cross-functional teams and contributing to a high-quality standard in testing APIs and databases. Candidates should have 2-3 years of experience with backend technologies such as Node.js and TypeScript, as well as familiarity with testing tools like Postman and SQL databases including PostgreSQL.
Overview The Senior Engineer manages the engineering function as the senior representative, co-ordinates with the line manager and provides Engineering Leadership for their respective project(s). Sets the strategy for Engineering setting out and onsite control, along with the (Engineer/Assistant Engineer) and subordinates/supply chain. Is the primary point of reference for QA, record keeping and production ensuring the establishment and maintenance of the Sisk Quality procedures and requirements. Also takes responsibility for Temporary Works Control/Co-ordination and where required actively manages lifting operations. John Sisk & Son have been building excellence as a family-owned international construction company by offering trust, certainty and value to our clients whilst being at the heart of change. Responsibilities Competent and demonstrates advanced awareness in the best forms of dimensional control and is comfortable in rotating global grids into local grid format Ensures that site and graduate engineers take responsibility for the management of survey equipment Ensures that the engineering team completes as-built surveys for key elements. Understands key tolerances and can analyse details across several interfaces to highlight potential problems Completes an individual daily diary Competent in the principles of quality control for most packages. Can review and create Inspection & Test Plans. Can readily display advanced knowledge of key packages such as concrete, drainage, steelwork and brickwork Has a good awareness of the project specifications, in particular tolerances for vertical and horizontal structural elements Controls the components of the SISK Non-Conformance procedure. Is comfortable in creating and closing out Non-Conformances. Understands the cost of defects and remedial works. Works actively to close out NCR's in a timely manner Is competent in the issuing of "Permits to break ground" Can review and create method statements and risk assessments Identifies where information is missing and has an excellent working knowledge of the project RFI process Experience Is fully competent in understanding the dangers of underground services and the risk control procedures required Excellent verbal and written communication skills Good working knowledge of Microsoft Office Is competent in the use of digital information systems i.e. A-Site, Viewpoint for Projects, etc. Significant experience in the design management process A broad range of technical exposure, within the following trades - Piling, Geotechnical, Substructures (including Waterproofing) Qualifications B. Eng Civil Engineering Temporary Works Coordinator training Lifting Operations basic awareness course A61 CPCS Lifting would be beneficial Planning & programming software Additional Information Competitive salary 26 days annual leave Pension and benefits Unlimited learning and development opportunities Much more Our People and Recruitment Commitment At Sisk Group our people are at the heart of our success. We offer the chance to work with purpose, build a career with no limits and be part of a great team. All vacancies are managed directly by our Internal Recruitment Team. Unsolicited contact or speculative CVs from unapproved agencies will not be accepted and no introductory fees will apply. We are an equal opportunities employer. We welcome applications from all qualified candidates regardless of gender, race, ethnicity, disability, age, sexual orientation, religion or any other protected characteristic. Reasonable adjustments are available during the recruitment process. We know the confidence gap and imposter phenomenon can stop talented candidates applying. You do not need to meet every criterion - your skills and potential matter. Don't hold back we want to hear from you. All recruitment materials comply with legal and regulatory requirements including the EU Pay Transparency Directive and the Equality Acts UK and Ireland
May 11, 2026
Full time
Overview The Senior Engineer manages the engineering function as the senior representative, co-ordinates with the line manager and provides Engineering Leadership for their respective project(s). Sets the strategy for Engineering setting out and onsite control, along with the (Engineer/Assistant Engineer) and subordinates/supply chain. Is the primary point of reference for QA, record keeping and production ensuring the establishment and maintenance of the Sisk Quality procedures and requirements. Also takes responsibility for Temporary Works Control/Co-ordination and where required actively manages lifting operations. John Sisk & Son have been building excellence as a family-owned international construction company by offering trust, certainty and value to our clients whilst being at the heart of change. Responsibilities Competent and demonstrates advanced awareness in the best forms of dimensional control and is comfortable in rotating global grids into local grid format Ensures that site and graduate engineers take responsibility for the management of survey equipment Ensures that the engineering team completes as-built surveys for key elements. Understands key tolerances and can analyse details across several interfaces to highlight potential problems Completes an individual daily diary Competent in the principles of quality control for most packages. Can review and create Inspection & Test Plans. Can readily display advanced knowledge of key packages such as concrete, drainage, steelwork and brickwork Has a good awareness of the project specifications, in particular tolerances for vertical and horizontal structural elements Controls the components of the SISK Non-Conformance procedure. Is comfortable in creating and closing out Non-Conformances. Understands the cost of defects and remedial works. Works actively to close out NCR's in a timely manner Is competent in the issuing of "Permits to break ground" Can review and create method statements and risk assessments Identifies where information is missing and has an excellent working knowledge of the project RFI process Experience Is fully competent in understanding the dangers of underground services and the risk control procedures required Excellent verbal and written communication skills Good working knowledge of Microsoft Office Is competent in the use of digital information systems i.e. A-Site, Viewpoint for Projects, etc. Significant experience in the design management process A broad range of technical exposure, within the following trades - Piling, Geotechnical, Substructures (including Waterproofing) Qualifications B. Eng Civil Engineering Temporary Works Coordinator training Lifting Operations basic awareness course A61 CPCS Lifting would be beneficial Planning & programming software Additional Information Competitive salary 26 days annual leave Pension and benefits Unlimited learning and development opportunities Much more Our People and Recruitment Commitment At Sisk Group our people are at the heart of our success. We offer the chance to work with purpose, build a career with no limits and be part of a great team. All vacancies are managed directly by our Internal Recruitment Team. Unsolicited contact or speculative CVs from unapproved agencies will not be accepted and no introductory fees will apply. We are an equal opportunities employer. We welcome applications from all qualified candidates regardless of gender, race, ethnicity, disability, age, sexual orientation, religion or any other protected characteristic. Reasonable adjustments are available during the recruitment process. We know the confidence gap and imposter phenomenon can stop talented candidates applying. You do not need to meet every criterion - your skills and potential matter. Don't hold back we want to hear from you. All recruitment materials comply with legal and regulatory requirements including the EU Pay Transparency Directive and the Equality Acts UK and Ireland
Systems / Technical Business Analyst Glasgow 49,000 to 58,500 Are you a technically strong Business / Systems Analyst who enjoys working closely with engineers and architects to turn complex business needs into clear, deliverable system designs within large-scale agile environments? In this role, you will sit at the heart of software delivery, working across engineering, QA, architecture and product to translate validated business requirements into robust technical solutions. You will help shape system designs, manage competing architectural and business demands, and ensure teams have the clarity they need to deliver effectively. You will be heavily involved in backlog creation and refinement, breaking down complex ideas into epics, stories and tasks, while ensuring non-functional requirements such as performance, security and scalability are clearly defined. This is a hands-on role suited to someone comfortable operating as a developer or tester when required to support sprint goals. The role offers the opportunity to influence technical direction, reduce technical debt, and improve development processes, all while working within modern agile delivery teams using contemporary web technologies and toolsets. The Role: Translate business requirements into detailed system requirements and backlog items. Collaborate with engineers and architects to produce solution and system designs aligned to standards. Create and maintain technical documentation including UML and design artefacts. Break down work into clear epics, stories and tasks within Jira. Identify and mitigate technical delivery risks through reviews and proof-of-concepts. The Person: Experience as a Technical Analyst, Systems Analyst, Test Analyst or Software Engineer. Strong understanding of agile software development lifecycles. Experience with Jira, Confluence. While not being expected to code, you should have an understanding of Java, Python and SQL. Confident working across development, QA and architecture teams. Reference Number: BBBH(phone number removed) Rise Technical Recruitment Ltd acts an employment agency for permanent roles and an employment business for temporary roles. The salary advertised is the bracket available for this position. The actual salary paid will be dependent on your level of experience, qualifications and skill set and will be decided by our client, the employer. Rise are not responsible or liable for any hiring decisions made by the end client. We are an equal opportunities company and welcome applications from all suitable candidates.
May 11, 2026
Full time
Systems / Technical Business Analyst Glasgow 49,000 to 58,500 Are you a technically strong Business / Systems Analyst who enjoys working closely with engineers and architects to turn complex business needs into clear, deliverable system designs within large-scale agile environments? In this role, you will sit at the heart of software delivery, working across engineering, QA, architecture and product to translate validated business requirements into robust technical solutions. You will help shape system designs, manage competing architectural and business demands, and ensure teams have the clarity they need to deliver effectively. You will be heavily involved in backlog creation and refinement, breaking down complex ideas into epics, stories and tasks, while ensuring non-functional requirements such as performance, security and scalability are clearly defined. This is a hands-on role suited to someone comfortable operating as a developer or tester when required to support sprint goals. The role offers the opportunity to influence technical direction, reduce technical debt, and improve development processes, all while working within modern agile delivery teams using contemporary web technologies and toolsets. The Role: Translate business requirements into detailed system requirements and backlog items. Collaborate with engineers and architects to produce solution and system designs aligned to standards. Create and maintain technical documentation including UML and design artefacts. Break down work into clear epics, stories and tasks within Jira. Identify and mitigate technical delivery risks through reviews and proof-of-concepts. The Person: Experience as a Technical Analyst, Systems Analyst, Test Analyst or Software Engineer. Strong understanding of agile software development lifecycles. Experience with Jira, Confluence. While not being expected to code, you should have an understanding of Java, Python and SQL. Confident working across development, QA and architecture teams. Reference Number: BBBH(phone number removed) Rise Technical Recruitment Ltd acts an employment agency for permanent roles and an employment business for temporary roles. The salary advertised is the bracket available for this position. The actual salary paid will be dependent on your level of experience, qualifications and skill set and will be decided by our client, the employer. Rise are not responsible or liable for any hiring decisions made by the end client. We are an equal opportunities company and welcome applications from all suitable candidates.
