425 jobs found

HVAC Engineer Servicing & Breakdowns Commercial Environments East Anglia 44,000 + Van & Package Travel Time Package Expected Earnings: 50-60K Leading Service Provider We are actively recruiting for a HVAC / Air Conditioning Engineer to carry out servicing and breakdowns within commercial environments across East Anglia. As the HVAC / Air Conditioning Engineer, you will be attending servicing, breakdowns, planned maintenance and remedial works to VRVs, VRFs, VAVs, split units, multi split units, DX units and similar commercial HVAC equipment. Employment Package: Role: HVAC / Air Conditioning Engineer Industry: Building Services / Maintenance Works: Servicing & Breakdowns Base Salary: Up to 44,000 Expected Earnings: 50,000 - 60,000 per annum Location/s: East Anglia / Up to maximum of 2 hour radius of home address. Hours: Monday - Friday, 08:00am - 5:00pm / 9 hour working day. Travel time pay: Paid after 30 minutes each way. Paid overtime available: x1.5 - x2 rate. Call out rota: 1 in 6-8 weeks. 100 weekly standby + minimum of 4 hours pay if called out. Company Van & Fuel Card provided (business use only) 26 days holiday + bank holidays (total 34 days) Company pension, income protection, private health & dental plans etc. Employer: Leading UK Service Provider Requirements: Must hold F-Gas certification Must hold experience carrying out servicing and breakdown works across Air Conditioning / HVAC equipment within commercial environments. Must hold a UK driving license with 9 points or under. If you are an experienced, qualified HVAC Engineer / Air Conditioning Engineer and would be interested in this role, then please apply today by submitting a full CV.

HVAC Engineer Servicing & Breakdowns Commercial Environments East Midlands 44,000 + Van & Package Travel Time Package Expected Earnings: 50-60K Leading Service Provider We are actively recruiting for a HVAC / Air Conditioning Engineer to carry out servicing and breakdowns within commercial environments across East Anglia. As the HVAC / Air Conditioning Engineer, you will be attending servicing, breakdowns, planned maintenance and remedial works to VRVs, VRFs, VAVs, split units, multi split units, DX units and similar commercial HVAC equipment. Employment Package: Role: HVAC / Air Conditioning Engineer Industry: Building Services / Maintenance Works: Servicing & Breakdowns Base Salary: Up to 44,000 Expected Earnings: 50,000 - 60,000 per annum Location/s: East Midlands / Up to maximum of 2 hour radius of home address. Hours: Monday - Friday, 08:00am - 5:00pm / 9 hour working day. Travel time pay: Paid after 30 minutes each way. Paid overtime available: x1.5 - x2 rate. Call out rota: 1 in 6-8 weeks. 100 weekly standby + minimum of 4 hours pay if called out. Company Van & Fuel Card provided (business use only) 26 days holiday + bank holidays (total 34 days) Company pension, income protection, private health & dental plans etc. Employer: Leading UK Service Provider Requirements: Must hold F-Gas certification Must hold experience carrying out servicing and breakdown works across Air Conditioning / HVAC equipment within commercial environments. Must hold a UK driving license with 9 points or under. If you are an experienced, qualified HVAC Engineer / Air Conditioning Engineer and would be interested in this role, then please apply today by submitting a full CV.

Manufacturing Engineer 8 month contract - Outside IR35 Immediate start Sunbury on Thames Our client are a leading manufacturer providing specialist solutions to a variety of industries such as aerospace, power generation, rail and oil and gas industries. They are looking for an experienced Manufacturing Engineer to join the team. Manufacturing Engineer Working across operations, supply chain and design engineering to provide manufacturing engineering expertise in supporting existing and new products, defining new and supporting existing processes. You will assist in the implementation of strategic Lean initiatives throughout the Company, leading some Continuous Improvement projects. Main Duties/Responsibilities Work with manufacturing cell leaders, lean co-ordinator and design engineering to improve process efficiencies Implement 'Standard work', generating & maintaining manufacturing documentation (SOP's, Routings, "Visual Factory" displays) Creation & Maintenance of Routings in the MRP system Implement lean manufacturing methods (e.g. 1-piece flow lines, visual factory) to reduce throughput times, rework/scrap and work in progress Implement basic improvement tools, from 5S, 7 Wastes, Visual Management and Standardised Work balanced assembly lines where single (best) piece flow philosophies are employed Implement any required layout changes, ensuring both the facilities and maintenance teams are fully involved Support the Manufacturing Cells with their recording, and analysis of production data, and ensure the correct focus is placed on the main issues arising Initiate and / or lead improvement projects and CAPEX to enable new process and product introductions. Work with Engineering on product documentation modifications and parts obsolescence Provide day-to-day manufacturing engineering support for the production cells to enable customer schedule adherence (Fracas/concessions, change notes or MRB (material review board) Lead and work in teams to develop process FMEA, in their construction and implementation. Manage new product introductions and the manufacture of legacy products from release to production through the product life cycle. Mentor for cell leaders for improved methods of manufacturing assembly and test. Manufacturing Engineer Essential Skills/Experience/Qualifications; 5+ years experience within a manufacturing/engineering environment, ideally for the aerospace industry Previous experience of NPI Experience of implementing Standard Work processes Proven record of successfully implementing Lean in an industrial environment (either as a co-ordinator or as a leader) A proven track record of generating and maintaining process maps, PFMEA's and control plans Strong knowledge of lean manufacturing principles Experience of using problem solving techniques (5 Why's, Fishbone/Ishikawa diagrams, 8D) Significant technical & problem solving experience in an electro-mech. manufacturing environment. Good time management with a significant track record of planning / managing complex long term projects.

Principal Technical Safety Engineer with knowledge and experience of Software Development Warrington and Other Locations Risktec is looking for a Principal Technical Safety Engineer who not only has strong technical safety expertise, but also a genuine interest in and aptitude for software development. Specifically, we are seeking someone who can maintain and further develop our internal software tools that support our consultancy services. Background Risktec Solutions is an established, independent and specialist risk management consulting and training company, and is part of the TÜV Rheinland Group. We help clients to manage health, safety, security, environmental and business risk in sectors where the impact of loss is significant. Our people are high calibre professionals, with a strong focus on meeting clients expectations and we have offices across the UK and in the Netherlands, Dubai, Muscat, Houston and Calgary. Role Description The successful candidate will be part of an energetic, expanding team, and will be expected to work effectively and collaboratively with colleagues on multiple projects in a supportive, progressive environment. This permanent position would be based preferably at our Warrington office, but our other office locations will also be considered. The role may involve some occasional travel within the UK and world-wide locations to meet project requirements. This varied and challenging role will help drive forward Risktec s risk management consulting services, with your focus in two key areas: Technical safety project work and consultancy for external clients; and Maintenance and development of internal software packages supporting consultancy services. Consulting Key Skills and Experience Applicants should have a relevant Science, Mathematics or Engineering Degree , and possess strong analytical thinking, numerical, written and verbal communication skills. The candidate must have a minimum of eight years of relevant experience in some of the following areas: QRA and other technical safety studies (BRA, EERA, ESSA, FERA, Facility Siting Studies, etc.) Consequence and physical effects modelling Computational Fluid Dynamics (CFD) Fire and Gas Mapping Reliability, Availability and Maintainability (RAM) studies Experience in the use of software packages such as SAFETI, PHAST, FRED, SHEPHERD, FLACS, FDS, Reliability/ Availability Workbench Software Development Key Skills and Experience Due to the varied nature of the role, candidates must have a broad experience base, with the ability to select the optimum technology for a particular problem. To this end, the candidate must have some experience in several of the following areas: Full stack development Python (and associated data analysis libraries such as Numpy and Pandas) C#, .NET, and JavaScript/Typescript Visual Basic for Applications (VBA) Linux, including bash scripting Git You will maintain, develop and use internal software relating to our risk modelling capabilities, supporting consultancy projects across the company. This will include routine development of our existing internal tools, as well as ad-hoc support to other consultants where automated software solutions are required. Tasks may include scripting of simulation data analyses, 3D and mathematical modelling, process automation and development of bespoke risk modelling software solutions based on specific client requests. To fulfil this responsibility, applicants should be experienced in both front-end and back-end development languages, frameworks and third-party libraries. You will be the driving force behind the software maintenance/ development programme leading, managing and implementing it assisted by Directors, subject matter experts and consultants. Our Offer We have an established competence framework, with regular appraisals and a defined pathway for progression. In addition, a competitive package of salary and benefits is offered for permanent staff, including: 33 days annual leave (including public holidays) Flexible working Company-wide, inclusive profit share scheme Private medical insurance Life insurance 7.5% contribution into a pension scheme Payment of subscription fees for membership of one professional body

Job title: EC&I Engineer Location: Royston, Hertfordshire, UK (Site based role) This role is a 24-month fixed term contract. World-changing careers, enabled by Johnson Matthey. With more than 200 years history, join us and help to accelerate the transition to net-zero! As an EC&I Engineer, you'll contribute to JM's mission as a world leader in sustainable technology, transforming energy and reducing carbon emissions for a cleaner, brighter future. Reporting into the Senior Electrical Engineer within the Royston Engineering team, the EC&I Engineer is responsible for providing second level technical support and expertise across a diverse range of industrial equipment. The role will drive implementation the delivery of EC&I improvement plans to ensure business needs both now and in the future are met. The role: As an EC&I Engineer, you will help drive our goals by: Ensures programmes are in place to manage compliance inspections across EC&I equipment on site (ATEX, Functional Safety, Gas Detection, Fire Alarms, Environmental Analysers, Fire Suppression, Test Equipment calibration etc). Provide second level technical support to the Maintenance shift teams to assist root cause analysis of complex plant EC&I breakdowns. Ownership of EC&I maintenance plans ensuring industry best practice is embedded across the plant. Ensure instrument loop calibrations are completed to satisfy ISO9001 and 14001 requirements. Working with the Senior Electrical Engineer, ensure contingency plans are in place to support site controls systems and instrumentation as well as the power distribution to meet the business/operational needs. Lead root cause analysis (RCA) of complex breakdowns of plant issues. Key skills that will help you succeed in this role: Minimum 3 years' experience in a similar role Experience managing maintenance of industrial EC&I equipment within a similar industry (chemical, pharma, food etc) Good understanding of maintenance techniques and their application Knowledge of applicable international standards (e.g., IEC 60079, IEC 61511) Experience working in a regulated environment (e.g., COMAH, Chemical, Oil & Gas etc.) is not essential but highly desirable Even if you only match some of the skills, we'd love to hear from you to discuss further! What we offer: We make sure salaries are fair, competitive and aligned to individual roles, experience and responsibilities. We are also supportive of hybrid and flexible working and where applicable, offer life, medical and other benefits that support our employees' financial and physical wellbeing, such as: Retirement savings Share plans Saving accounts House saving funds Life and disability insurance Commuter allowances and loans Medical plans / health assessments Fitness discounts Ready to make a meaningful impact on your career and the environment? Join us and help shape a sustainable future while advancing your career! At JM, inclusivity is central to our values. We create an environment where everyone can thrive, embracing diverse perspectives to tackle challenges and ensure all colleagues feel valued and connected. For any queries or accessibility requirements, please contact (url removed). We will work with you to make suitable adjustments at any stage of the recruitment process. All conversations are confidential, and your feedback is welcome to help us provide an accessible and positive recruitment experience. Closing date for applications: This job advertisement will be posted for a minimum of 2 weeks, early application is advised. To submit your application, please click the "Apply" button online. All applications are carefully considered and your details will be stored on our secure Application Management System. This is used throughout Johnson Matthey for the selection of suitable candidates for our vacancies as they arise.Johnson Matthey respects your privacy and is committed to protecting your personal information. For more information about how your personal data is used please view our privacy notice: Johnson Matthey Privacy Notice . By applying for this role and creating an account you are agreeing to the notice. Johnson Matthey Plc is an equal opportunities employer and positively encourages applications from suitably qualified and eligible candidates regardless of sex, race, disability, age, sexual orientation, marriage or civil partnership, pregnancy or maternity, religion or belief.

Metrology Laboratory Maintenance Engineer - (phone number removed) - £27.30/hr umbrella rate Do you have a NVQ Level 4 or an indentured apprenticeship in Mechanical, Electrical, or Maintenance Engineering? along with familiarity with scientific instruments like CMM, surface finish, and CT/X-Ray equipment, coupled with a background in quality standards? Are you ready to step into a role that combines technical expertise with a dynamic and innovative environment? This is your chance to become a Metrology Laboratory Maintenance Engineer and play a critical part in supporting a world-class Metrology Laboratory. This position offers the opportunity to contribute to engineering excellence, support cutting-edge prototype developments, and make a tangible impact on quality within the automotive sector. If you're passionate about precision, problem-solving, and delivering results, this role is tailored for you. What You Will Do: - Maintain and control laboratory environmental conditions, including temperature, humidity, and pressure, ensuring a safe and compliant workspace. - Support and coordinate maintenance activities for a variety of specialist equipment such as CMM, surface finish, CT/X-Ray, and optical metrology tools. - Act as the responsible person for Contract Job Registrations (CJR), including managing RAMS and coordinating contractors and suppliers. - Ensure statutory and safety assessments, including PUWER, LEV, COSHH, and equipment risk assessments, are up to date and adhered to. - Raise and manage purchase orders for maintenance and equipment support, ensuring accurate invoicing and supplier collaboration. - Work closely with Metrology Engineers, facilities teams, and external suppliers to meet technical requirements and deliver right-first-time results. What You Will Bring: - A vocational qualification such as an NVQ Level 4 or an indentured apprenticeship in Mechanical, Electrical, or Maintenance Engineering. - Strong knowledge of fluid and gas management systems, with proven experience in fault finding and rectification within facility environments. - Familiarity with scientific instruments like CMM, surface finish, and CT/X-Ray equipment, coupled with a background in quality standards. - A working knowledge of Health and Safety requirements, including Risk Assessment, COSHH, and PUWER, ensuring compliance at all times. - Excellent communication skills, a proactive attitude, and a natural ability to collaborate with diverse teams and stakeholders. This role is pivotal to the success of the Metrology Laboratory, which serves as a cornerstone for engineering development, root cause analysis, and benchmarking. By ensuring the laboratory's facilities and equipment operate at the highest standards, you will contribute to the company's mission of setting benchmarks for quality and innovation in the automotive industry. Your technical expertise and dedication will help drive results and maintain the laboratory's reputation for excellence. Location: This exciting opportunity is based in Whitley, a location that offers a blend of accessibility and a collaborative work environment. Interested?: Don't miss the chance to elevate your career as a Metrology Laboratory Maintenance Engineer. Apply now to join a forward-thinking company where your skills will make a difference. Take the first step towards an exciting and rewarding future today. This role is Inside IR35. Your CV will be forwarded to Jonathan Lee Recruitment, a leading engineering and manufacturing recruitment consultancy established in 1978. The services advertised by Jonathan Lee Recruitment are those of an Employment Agency. In order for your CV to be processed effectively, please ensure your name, email address, phone number and location (post code OR town OR county, as a minimum) are included.

SG Personnel are working with a market leading manufacturing business in Gateshead who are looking to recruit a Facilities Co-Ordinator on a permanent basis. This is a superb opportunity with an established business who have seen significant capital expenditure over recent years. Key Accountabilities: The following are the main accountabilities for the job. Other duties, commensurate with the grading of the job, may also be assigned from time to time. Organise all Engineering and maintenance service contracts to be completed on schedule this covers Gas inspections, water checks, LOLER, fire alarm and prevention systems etc Manage relationships with contractors and service providers, review and renew service contracts as required. Organise repairs and/or inspections of site fire equipment. Improve site safety and security. Organise the repairs/replacement of site infrastructure as required Fabric of building, civils, grounds, welfare etc. Organise site inspections in relation to HSE - PUWER/LOLER (fixed ladders, platforms, lifting equipment). Be an advocate for Facilities and increase the departments knowledge. Liaise with Maintenance and Engineering to get the required support to repair and maintain the facility, plan work around the cycles and priority Maintenance work. Person Specification: Minimum 5 years Facilities Management or Co-ordination Rounded & legislative knowledge of statutory inspections Self managing Budget control experience in a budgetary controlled environment Working Hours 7am to 3.45pm Monday to Thursday 7am to 11.30am Friday

Procurement Coordinator Haydock Up to 32,000 + Benefits Permanent Hybrid Working Available We are currently recruiting on behalf of a leading national FM and engineering provider for a Procurement Coordinator to join their growing team based in Haydock. This is a fantastic opportunity for somebody with previous procurement or supply chain administration experience who is looking to develop their career within a fast-paced facilities management and engineering environment. The successful candidate will play a key role in supporting procurement operations, supplier compliance and subcontractor management across a national portfolio. Key Responsibilities: Ensuring subcontractor and supplier insurances, accreditations, RAMS and schedules of rates are maintained and up to date on internal systems Managing procurement inbox enquiries and day-to-day administrative support Supporting subcontractor and supplier PQQ applications Assisting with drafting Framework Agreements and Statements of Work Supporting rebate agreements and renewals Delivering subcontractor portal demonstrations to supply chain partners Supporting supplier onboarding, engagement and compliance processes Reviewing supplier documentation, terms and conditions, and amendments Assisting with subcontractor maintenance contracts, supplier proposals and negotiations Supporting contract mobilisations and internal procurement activities Ensuring procurement activity aligns with company policies and relevant legislation Supporting compliance across gas, electrical, fire and water hygiene supplier requirements Requirements: Previous experience within a procurement, supply chain or administration role Experience within facilities management, engineering or construction would be advantageous Previous experience working with PQQs, schedules of rates, PPVs and/or Framework Agreements would be beneficial Strong administrative and organisational skills with excellent attention to detail Confident communication and stakeholder management skills Commercial awareness with the ability to support supplier negotiations Ability to work effectively within a fast-paced environment and manage multiple priorities Strong problem-solving skills and ability to use initiative CIPS qualified or working towards qualification is desirable Package: Competitive salary up to 32,000 Annual pay reviews and bonus scheme 25 days holiday plus bank holidays Hybrid working flexibility Personal development and progression opportunities Employee wellbeing assistance programme Healthcare and medical insurance after qualifying period Company events and competitions

Why choose us? BRUSH Group provides the energy solutions that help power our built world . From power transformers to switchgear and engineering solutions, for generations, the BRUSH brand has stood for engineering excellence. We are committed to supporting the global effort for industrial decarbonisation and sustainable development and have set ambitious objectives to achieve our target of net zero greenhouse gas emissions by 2050. What's the role? This role will act as strategic partner to BRUSH Services leadership, playing a key role within the team.Providing insightful and informative financial reporting which provide the basis for strategic decision making for the leadership team. Ensure accurate, complete and timely financial reporting. Responsible for budgeting, forecasting, and financial planning and closely managing cashflow requirements for BRUSH Services.BRUSH Services is a newly established division, aiming to maximise potential of the services teams across the Group, this role will be instrumental in building the operational rhythm, working with various departments to ensure key initiatives are delivered - commercial, procurement and operational. Key Responsibilities: Provide financial advice and guidance to senior management. Develop and implement financial strategies to support BRUSH Services objectives. Monitor KPIs to identify trends, risks & opportunities. Including cost reduction, productivity, project margin & commercial KPIs Manage BRUSH Services cash flow and ensure sufficient liquidity, clear and timely communication of shortfalls to Group Finance. Trade Debt management. Lead the budgeting, forecasting and financial planning process for BRUSH Services. Oversee short-term forecasting to ensure "no-surprises" in financial results. Assessing Capex investment opportunities and managing spend What are we looking for: Qualified accountant or MBA or equivalent Experience within a multi-location/divisional business Ability to create and execute on medium- and long-term strategy Proven ability to complete projects and achieve results in an ambiguous work environment. Strong leadership and ability to manage multicultural teams Experience in business integration would be beneficial Experience in ERP implementation would be beneficial What's in it for you? Competitive salary Holiday allowance starting at 26 days per annum plus bank holidays (pro rata for part time roles) Flexible and Hybrid working options (role dependant) Life insurance - 4 x annual salary Enhanced Company Pension scheme 24/7 free and confidential Employee Assistance Programme GP24 Service - Access to remote, private GP services 24/7, 365 days a year plus Second Medical Opinions. BRUSHRewards - Discover plenty of ways to get more active and make great savings on everyday essentials as well as gifts for loved ones, holidays and special treats for yourself. Family friendly policies including Enhanced Maternity/Paternity Bike2work scheme Long Service Awards Developing our people is important to us - we support and encourage development by offering ongoing professional development and training. About The Organisation BRUSH Group provide agile and adaptive engineering solutions and products, including consultancy services, design, and project management as well as award-winning product technology, to a wide range of projects.A chosen partner for national and regional power generation and distribution network operators, through innovation and a commitment to delivering solutions that address grid-resilience and drive system change, we support the global drive to net-zero, helping create a future-proof Infrastructure.

Are you a skilled and qualified Commercial Gas Engineer looking for a permanent role in Didcot ? A leading FM and maintenance company is seeking a dedicated individual to join their team. This is a fantastic opportunity to work on a variety of projects and further develop your skills within a reputable organisation. Competitive salary and benefits package on offer. Experience Proven experience in commercial gas maintenance and minor remedial tasks in commercial environments. Skills Commercial Gas Tickets Commercial Catering Tickets (Highly Desirable) Domestic Gas Qualifications (Desirable) Driving Licence IPAF & PASMA OFTEC (Desirable) Multi-skilled experience in minor electrical/fabric tasks Qualifications Relevant qualifications and experience are required. Specific certifications are listed in the Skills section. What we offer Competitive Salary (up to £49,000) Overtime Available Core hours Monday to Friday (40 hour week) Annual leave + bank holidays Generous Pension Scheme Training and Development Courses Company Description A large, reputable FM and maintenance company. Randstad CPE values diversity and promotes equality. No terminology in this advert is intended to discriminate against any of the protected characteristics that fall under the Equality Act 2010. We encourage and welcome applications from all sections of society and are more than happy to discuss reasonable adjustments and/or additional arrangements as required to support your application. Candidates must be eligible to live and work in the UK. For the purposes of the Conduct Regulations 2003, when advertising permanent vacancies we are acting as an Employment Agency, and when advertising temporary/contract vacancies we are acting as an Employment Business.

AMS is a global workforce solutions partner committed to creating inclusive, dynamic, and future-ready workplaces. We help organisations adapt, grow, and thrive in an ever-evolving world by building, shaping, and optimising diverse talent strategies. Our Contingent Workforce Solution (CWS) is one way we support our clients. Acting as an extension of their recruitment teams, we connect them with skilled interim and temporary professionals, fostering workplaces where everyone can contribute and succeed. On behalf of our globally respected client who develop cutting-edge technologies that deliver clean, safe and competitive solutions to meet the planet's vital power needs we are looking for a Buyer for a 12 month contract based in Bristol . This role is a hybrid position in which you would be required to be office based 3 days per week and working from home 2 days per week (37 hours per week). Purpose of the role: Support the development and execution of integrated category strategies within Group Procurement, focusing on complex indirect engineering spend Lead strategic sourcing, supplier engagement, and risk mitigation to ensure continuity of supply, performance, and capability delivery Act as a key procurement partner across high-value technical projects, driving commercially sound and compliant purchasing decisions As a Buyer, you will: Execute category strategies through end-to-end strategic sourcing, supplier selection, contracting, and in-contract supplier management Lead procurement activity across complex indirect categories, including test beds, facilities, and capability development projects Analyse and mitigate supply chain risks, identifying gaps and working cross-functionally to secure funding and solutions Collaborate with engineering and project teams on high-specification procurement initiatives with strong technical input Ensure all procurement activity aligns with governance, regulatory, and export control requirements Support strategic procurement initiatives, focusing on how purchasing is executed rather than transactional buying Travel within the UK to engage with internal stakeholders and suppliers as required The skills you'll need as a Buyer: Proven experience (5+ years) in procurement and sourcing, with a strong focus on strategic procurement and supplier management Background in technical or engineering environments (e.g. defence, aerospace, automotive, oil & gas, or other high-spec industries) Strong commercial acumen with the ability to balance technical and business requirements Experience analysing and mitigating supply chain risks within complex projects Strong stakeholder management and the ability to work across multidisciplinary, global teams Familiarity with procurement and supply chain processes, systems, and governance frameworks Next steps: We will only accept workers operating via an Umbrella or PAYE engagement model. If you are interested in applying for this Buyer position and meet the criteria outlined above, please click the link to apply and we will contact you with an update in due course. AMS, a Recruitment Process Outsourcing Company, may in the delivery of some of its services be deemed to operate as an Employment Agency or an Employment Business.

Our Property Management teams are at the heart of making our homes great places to live. You'll find us a secure place to build your long-term future. Working in the (Hampshire) locality, you will report directly to the Technical Manager - Gas and operate in a wider team. Here at Sovereign Network Group (SNG) we provide quality, affordable homes in happy, successful places. What we do makes a real difference to people's lives, and you'll share the satisfaction of doing something that really matters in a environment where your health and safety is important to ensure you and your colleagues stay safe and well, everywhere, every day. As a Heating Engineer , you will carry out Gas Servicing and Heating Breakdowns within Sovereign Network Group's customer homes in accordance with prescribed work schedules, the Gas Safety (Installation and Use) regulations and to Sovereign Network Group's established standard procedures set for delivery of exceptional customer service. You will also carry out planned maintenance checks on systems and equipment, repair gas leaks or old gas system parts , and be responsible for installing/repairing heating system pipe work , while advising customers about gas safety and energy efficiency. As you'll spend a fair amount of time on the road, we will provide you with a van and fuel card so you'll not be out of pocket. What we're looking for: Gas qualifications: CCN1 - Core Gas Safety CENWAT1 - Central Heating Boilers & Water Heaters MET1 - Meters CKR1 - Domestic Cookers HTR1 - Gas Fires & Wall Heaters Ideally, you'll have an NVQ Level 2 in Domestic Plumbing (or equivalent) Great communication skills A full UK driving licence with the ability to drive a company van Previous experience as a domestic gas service and breakdown engineer Preferably, experience of working within social housing Comfortable working independently and as part of a team Confidence in using IT equipment such as iPads Please note, this role is subject to a satisfactory licence check, essential qualifications check and a basic disclosure. About SNG SNG provide over 85,000 homes and invest in communities across London and the South of England. Our purpose is to provide good affordable homes in thriving communities that people love for generations. This is an incredibly exciting time to join us as Domestic Heating Engineer as we continue to deliver against our Sector Leading 'homes and place' strategy transforming how we operate and organise ourselves, delivering safe service and affordable housing to our customers.

We're looking for a Utility Consulting Engineer to join our Design team based in London. Location: London - remote working available, with occasional travel to the office required. Hours: 40 hours per week - some flexibility on hours available if desired, just let us know when you speak to us. Salary: Starting from £40,000 per annum Sector: Design - Utilities We are unable to offer certificates of sponsorship to any candidates in this role. Join our specialist utility consultancy team and play a vital role in delivering essential infrastructure connections across exciting developments. You'll advise clients on electricity, gas, water and telecoms connections, managing projects from initial feasibility through to successful delivery. This is an opportunity to work collaboratively with clients, developers and utility providers, ensuring projects are delivered efficiently whilst navigating technical, regulatory and programme requirements. Are you An experienced utility professional advising on electricity, gas, water and telecoms connections? Confident managing utility projects from feasibility through design, procurement and delivery? Comfortable acting as the interface between clients, developers and utility providers? Experienced navigating technical risk, programme constraints and regulatory requirements? Passionate about working for a collaborative, trusted and delivery-focused organisation? Do you Hold, or be working towards, a degree or equivalent qualification in engineering, project management or similar? Bring strong experience within the UK utility sector, ideally in a consultancy or B2B environment? Have knowledge of utility infrastructure design, loading calculations and network reinforcement? Understand the UK utility market, competition in connections and regulatory frameworks? Have experience procuring and managing utility works for developers or major projects? Demonstrate strong communication, negotiation and report-writing skills? Want to work for a highly regarded Main Contractor, recognised as a Top 30 employer on Glassdoor? What will you be responsible for? As a Utility Consulting Engineer, you'll be working within the Design team, supporting them in delivering utility connection projects across new developments and existing assets. Your day to day will include: Leading utility connection projects from concept to completion, managing programme and budget Undertaking utility feasibility studies, due diligence and infrastructure design strategies Acting as the primary point of contact with utility providers, regulators and project teams Identifying and managing utility-related risks, including network constraints and asset conflicts Advising clients on cost efficiency, procurement strategy, sustainability and net-zero objectives What are we looking for? This role of Utility Consulting Engineer is great for you if: You hold, or are working towards, a degree or equivalent qualification in engineering, project management or a related discipline You have strong understanding of utility infrastructure, connections and procurement processes You bring experience managing utility feasibility studies, design strategies and delivery programmes You have knowledge of relevant legislation and guidance (e.g. NRSWA, HSG47, HAUC) You demonstrate strong communication, negotiation and report-writing skills Rewards and benefits We're proud to be able to offer our brilliant people a wide variety of benefits that you can tailor to your needs. You can see more information of benefits here. Diversity and inclusion Making Kier a diverse and inclusive place to work is a huge priority for us. We're proud of the steps we've taken so far, but we know we must always do more. Our employees are key in shaping Kier's diversity and inclusion initiatives and our people have made a huge impact on how we work, by using their experiences to shape our policies. You can see our D&I action plan here. As a Disability Confident employer, we will ensure that a fair and proportionate number of disabled applicants that meet the minimum criteria for this role will be offered an interview. Due to the nature of this role, you will also be required to complete a Basic Disclosure and Barring Service Check (applicants with convictions will be treated on a case-by-case basis. We do not discriminate based on an applicant's conviction history or the details of any convictions disclosed to us). Some roles may also be subject to further pre-employment checks. We look forward to seeing your application to . Matched pension scheme up to 7.5%, Life Assurance, Enhanced Family Friendly Policies, Discounts on go-to brands, Free Heath and wellbeing services, Training and development schemes, Electric Vehicle Leasing, Paid volunteering leave.