Jonathan Lee Recruitment Ltd
Binley Woods, Warwickshire
WORKSHOP SUPERVISOR NEEDED IN COVENTRY Are you an experienced Workshop Supervisor, Production Supervisor, Manufacturing Supervisor, Lead Technician, Lead Fitter or Section Supervisor who has experience from within the Automotive, Re-manufacturing or Defence sector, and are you looking for a permanent job on day shifts within Coventry?! We are seeking an experienced Workshop Supervisor to join a leading re manufacturing business in Coventry, the working hours are 8am - 4.30pm Monday to Friday (40 hours per week), with a competitive salary on offer (which will be discussed during the application and pre-screening stage). We are looking for someone who will be a hands-on supervisor that is still prepared to be on the tools and get their hands dirty, previous experience in a similar hands-on role is ESSENTIAL. The hiring manager would like someone who has previous experience and knowledge working with diesel engine repairs (reconditioning and overhaul) and/or experience in repairing diesel power generators. Previous experience working on military vehicles would be highly advantageous, and the hiring manager would also prefer someone to have a minimum of a NVQ Level 2 (or equivalent) in Mechanical and/or Electrical Engineering. What You Will Do: Supervise the Reman/Plant Team, ensuring daily production targets and departmental objectives are consistently achieved. Actively oversee and support workshop activities, maintaining high-quality standards and ensuring all outputs meet customer expectations. Complete essential documentation accurately, including job cards, survey reports, production tracking sheets, and compliance records. Maintain a clean and organised workspace, fostering an environment that supports efficiency and teamwork. Operate as a hands-on Lead Technician, combining technical expertise with leadership to achieve operational goals. Support and drive continuous improvement initiatives across the section. What You Will Bring: Proven experience in a lead technician role within a workshop or re-manufacturing environment - ESSENTIAL Previous experience within the Automotive, Re-manufacturing or Defence sector - ESSENTIAL A proven background in diesel engine repair, and/or experience servicing and repairing diesel power generators - ESSENTIAL Minimum of a NVQ Level 2 (or equivalent) in Mechanical and/or Electrical Engineering Excellent fault-finding and diagnostic skills in both mechanical and electrical systems. Previous experience working with/on military vehicles - PREFERRED As a Workshop Supervisor, you will play a pivotal role in driving the company's commitment to quality, efficiency, and innovation. Your leadership and technical skills will contribute to achieving production excellence while fostering a collaborative and motivated team environment. The company values dedication, expertise, and a proactive mindset, making this an excellent opportunity for someone looking to make a significant impact in their field. Location: This role is based in Coventry. Interested?: If you're ready to take on this exciting challenge and lead a team to success, apply now! Don't miss the chance to advance your career as a Workshop Supervisor in a rewarding and supportive environment. Your CV will be forwarded to Jonathan Lee Recruitment, a leading engineering and manufacturing recruitment consultancy established in 1978. The services advertised by Jonathan Lee Recruitment are those of an Employment Agency. In order for your CV to be processed effectively, please ensure your name, email address, phone number and location (post code OR town OR county, as a minimum) are included.
May 16, 2026
Full time
WORKSHOP SUPERVISOR NEEDED IN COVENTRY Are you an experienced Workshop Supervisor, Production Supervisor, Manufacturing Supervisor, Lead Technician, Lead Fitter or Section Supervisor who has experience from within the Automotive, Re-manufacturing or Defence sector, and are you looking for a permanent job on day shifts within Coventry?! We are seeking an experienced Workshop Supervisor to join a leading re manufacturing business in Coventry, the working hours are 8am - 4.30pm Monday to Friday (40 hours per week), with a competitive salary on offer (which will be discussed during the application and pre-screening stage). We are looking for someone who will be a hands-on supervisor that is still prepared to be on the tools and get their hands dirty, previous experience in a similar hands-on role is ESSENTIAL. The hiring manager would like someone who has previous experience and knowledge working with diesel engine repairs (reconditioning and overhaul) and/or experience in repairing diesel power generators. Previous experience working on military vehicles would be highly advantageous, and the hiring manager would also prefer someone to have a minimum of a NVQ Level 2 (or equivalent) in Mechanical and/or Electrical Engineering. What You Will Do: Supervise the Reman/Plant Team, ensuring daily production targets and departmental objectives are consistently achieved. Actively oversee and support workshop activities, maintaining high-quality standards and ensuring all outputs meet customer expectations. Complete essential documentation accurately, including job cards, survey reports, production tracking sheets, and compliance records. Maintain a clean and organised workspace, fostering an environment that supports efficiency and teamwork. Operate as a hands-on Lead Technician, combining technical expertise with leadership to achieve operational goals. Support and drive continuous improvement initiatives across the section. What You Will Bring: Proven experience in a lead technician role within a workshop or re-manufacturing environment - ESSENTIAL Previous experience within the Automotive, Re-manufacturing or Defence sector - ESSENTIAL A proven background in diesel engine repair, and/or experience servicing and repairing diesel power generators - ESSENTIAL Minimum of a NVQ Level 2 (or equivalent) in Mechanical and/or Electrical Engineering Excellent fault-finding and diagnostic skills in both mechanical and electrical systems. Previous experience working with/on military vehicles - PREFERRED As a Workshop Supervisor, you will play a pivotal role in driving the company's commitment to quality, efficiency, and innovation. Your leadership and technical skills will contribute to achieving production excellence while fostering a collaborative and motivated team environment. The company values dedication, expertise, and a proactive mindset, making this an excellent opportunity for someone looking to make a significant impact in their field. Location: This role is based in Coventry. Interested?: If you're ready to take on this exciting challenge and lead a team to success, apply now! Don't miss the chance to advance your career as a Workshop Supervisor in a rewarding and supportive environment. Your CV will be forwarded to Jonathan Lee Recruitment, a leading engineering and manufacturing recruitment consultancy established in 1978. The services advertised by Jonathan Lee Recruitment are those of an Employment Agency. In order for your CV to be processed effectively, please ensure your name, email address, phone number and location (post code OR town OR county, as a minimum) are included.
Construction Lecturer / Assessor Salary: £25 - £50 per hour / Ranging from £28,000 - £45,000 per annum Location: We are recruiting in several FE locations across the North. Job Type: Temporary and Permanent positions available. Working Hours: Part-time and Full-time positions available. Are you an experienced and resilient Construction Lecturer ? Would you like to work with young people undertaking vocational study programmes? If so, read on to find out how to join the UK's leading Further Education recruiter with additional benefits, offers and referral schemes. Reed Further Education are a leading recruitment agency working with Colleges, Prisons, Universities, and Training Providers across the UK. We are always looking for talented and aspiring Lecturers to join our team and help us deliver high-quality education to learners. Available Roles Reed Further Education are excited to work with Further Education Colleges across the North to recruit Lecturers to deliver accredited courses to young people.We are particularly interested in speaking to Lecturers of: Bricklaying Electrical Installation Multi-Skills Plumbing and Gas Plastering Carpentry and Joinery Construction Plant Operations HVAC (Heating, Ventilation & Air Conditioning) Fabrication and Welding Renewable Technologies CAD Day-to-Day of the role: Plan, deliver and assess vocational courses in the College. Co-ordinate the teaching and assessment of programmes, as identified by the Head of School, which includes liaison with other College staff. Fulfil the role of class tutor with administrative and pastoral responsibilities. Requirements: Occupationally competent in relevant subject. Possession of a relevant teaching or training qualification (e.g. QTS, QTLS, DTTLS, PGCE, A1, CAVA, TAQA). Experience of teaching on and assessing accredited qualifications from Entry Level to Level 3, 4 or 5. Benefits of working for Reed Further Education/our client: Exclusive representation to leading FE colleges and training providers in the area 1-2-1 Specialist Consultant who will search for jobs on your behalf. CV writing and job interview tips! The ability to sign up to a Health Cash Plan and Reed Discount Club. Entitlement to Statutory Sick Pay, Statutory Maternity, Paternity and Adoption Pay, Parental Leave and Antenatal/Pre-Adoption Appointment Payment Access to Training and Development - Reed Assessment Centre - Reed Learning. Eye Test and Spectacle Vouchers Great referral bonus' (up to £200 per successful referral!) To apply for this role, please send us your updated CV by clicking 'Apply Now'. Your application should demonstrate your passion for educational support and your commitment to safeguarding and promoting the welfare of children and young people. Not looking for a teaching role? We are also registering support staff, assessors and technicians, and other FE positions including HR, finance, facilities, administrators. We also have a specialist team of interim and senior management consultants with over 20 years' experience in the sector. "All candidates who register with Reed Further Education will have 2 years' referencing taken up and will be required to have a DBS check completed. All offers are conditional upon satisfactory background checks - If you are on the Barred List, it is against the law to apply and to be hired for a role that includes regulated activity with the concerned group."
May 16, 2026
Seasonal
Construction Lecturer / Assessor Salary: £25 - £50 per hour / Ranging from £28,000 - £45,000 per annum Location: We are recruiting in several FE locations across the North. Job Type: Temporary and Permanent positions available. Working Hours: Part-time and Full-time positions available. Are you an experienced and resilient Construction Lecturer ? Would you like to work with young people undertaking vocational study programmes? If so, read on to find out how to join the UK's leading Further Education recruiter with additional benefits, offers and referral schemes. Reed Further Education are a leading recruitment agency working with Colleges, Prisons, Universities, and Training Providers across the UK. We are always looking for talented and aspiring Lecturers to join our team and help us deliver high-quality education to learners. Available Roles Reed Further Education are excited to work with Further Education Colleges across the North to recruit Lecturers to deliver accredited courses to young people.We are particularly interested in speaking to Lecturers of: Bricklaying Electrical Installation Multi-Skills Plumbing and Gas Plastering Carpentry and Joinery Construction Plant Operations HVAC (Heating, Ventilation & Air Conditioning) Fabrication and Welding Renewable Technologies CAD Day-to-Day of the role: Plan, deliver and assess vocational courses in the College. Co-ordinate the teaching and assessment of programmes, as identified by the Head of School, which includes liaison with other College staff. Fulfil the role of class tutor with administrative and pastoral responsibilities. Requirements: Occupationally competent in relevant subject. Possession of a relevant teaching or training qualification (e.g. QTS, QTLS, DTTLS, PGCE, A1, CAVA, TAQA). Experience of teaching on and assessing accredited qualifications from Entry Level to Level 3, 4 or 5. Benefits of working for Reed Further Education/our client: Exclusive representation to leading FE colleges and training providers in the area 1-2-1 Specialist Consultant who will search for jobs on your behalf. CV writing and job interview tips! The ability to sign up to a Health Cash Plan and Reed Discount Club. Entitlement to Statutory Sick Pay, Statutory Maternity, Paternity and Adoption Pay, Parental Leave and Antenatal/Pre-Adoption Appointment Payment Access to Training and Development - Reed Assessment Centre - Reed Learning. Eye Test and Spectacle Vouchers Great referral bonus' (up to £200 per successful referral!) To apply for this role, please send us your updated CV by clicking 'Apply Now'. Your application should demonstrate your passion for educational support and your commitment to safeguarding and promoting the welfare of children and young people. Not looking for a teaching role? We are also registering support staff, assessors and technicians, and other FE positions including HR, finance, facilities, administrators. We also have a specialist team of interim and senior management consultants with over 20 years' experience in the sector. "All candidates who register with Reed Further Education will have 2 years' referencing taken up and will be required to have a DBS check completed. All offers are conditional upon satisfactory background checks - If you are on the Barred List, it is against the law to apply and to be hired for a role that includes regulated activity with the concerned group."
Construction Lecturer / Assessor Salary: £25 - £50 per hour / Ranging from £28,000 - £45,000 per annum Location: We are recruiting in several FE locations across the North. Job Type: Temporary and Permanent positions available. Working Hours: Part-time and Full-time positions available. Are you an experienced and resilient Construction Lecturer ? Would you like to work with young people undertaking vocational study programmes? If so, read on to find out how to join the UK's leading Further Education recruiter with additional benefits, offers and referral schemes. Reed Further Education are a leading recruitment agency working with Colleges, Prisons, Universities, and Training Providers across the UK. We are always looking for talented and aspiring Lecturers to join our team and help us deliver high-quality education to learners. Available Roles Reed Further Education are excited to work with Further Education Colleges across the North to recruit Lecturers to deliver accredited courses to young people.We are particularly interested in speaking to Lecturers of: Bricklaying Electrical Installation Multi-Skills Plumbing and Gas Plastering Carpentry and Joinery Construction Plant Operations HVAC (Heating, Ventilation & Air Conditioning) Fabrication and Welding Renewable Technologies CAD Day-to-Day of the role: Plan, deliver and assess vocational courses in the College. Co-ordinate the teaching and assessment of programmes, as identified by the Head of School, which includes liaison with other College staff. Fulfil the role of class tutor with administrative and pastoral responsibilities. Requirements: Occupationally competent in relevant subject. Possession of a relevant teaching or training qualification (e.g. QTS, QTLS, DTTLS, PGCE, A1, CAVA, TAQA). Experience of teaching on and assessing accredited qualifications from Entry Level to Level 3, 4 or 5. Benefits of working for Reed Further Education/our client: Exclusive representation to leading FE colleges and training providers in the area 1-2-1 Specialist Consultant who will search for jobs on your behalf. CV writing and job interview tips! The ability to sign up to a Health Cash Plan and Reed Discount Club. Entitlement to Statutory Sick Pay, Statutory Maternity, Paternity and Adoption Pay, Parental Leave and Antenatal/Pre-Adoption Appointment Payment Access to Training and Development - Reed Assessment Centre - Reed Learning. Eye Test and Spectacle Vouchers Great referral bonus' (up to £200 per successful referral!) To apply for this role, please send us your updated CV by clicking 'Apply Now'. Your application should demonstrate your passion for educational support and your commitment to safeguarding and promoting the welfare of children and young people. Not looking for a teaching role? We are also registering support staff, assessors and technicians, and other FE positions including HR, finance, facilities, administrators. We also have a specialist team of interim and senior management consultants with over 20 years' experience in the sector. "All candidates who register with Reed Further Education will have 2 years' referencing taken up and will be required to have a DBS check completed. All offers are conditional upon satisfactory background checks - If you are on the Barred List, it is against the law to apply and to be hired for a role that includes regulated activity with the concerned group."
May 16, 2026
Seasonal
Construction Lecturer / Assessor Salary: £25 - £50 per hour / Ranging from £28,000 - £45,000 per annum Location: We are recruiting in several FE locations across the North. Job Type: Temporary and Permanent positions available. Working Hours: Part-time and Full-time positions available. Are you an experienced and resilient Construction Lecturer ? Would you like to work with young people undertaking vocational study programmes? If so, read on to find out how to join the UK's leading Further Education recruiter with additional benefits, offers and referral schemes. Reed Further Education are a leading recruitment agency working with Colleges, Prisons, Universities, and Training Providers across the UK. We are always looking for talented and aspiring Lecturers to join our team and help us deliver high-quality education to learners. Available Roles Reed Further Education are excited to work with Further Education Colleges across the North to recruit Lecturers to deliver accredited courses to young people.We are particularly interested in speaking to Lecturers of: Bricklaying Electrical Installation Multi-Skills Plumbing and Gas Plastering Carpentry and Joinery Construction Plant Operations HVAC (Heating, Ventilation & Air Conditioning) Fabrication and Welding Renewable Technologies CAD Day-to-Day of the role: Plan, deliver and assess vocational courses in the College. Co-ordinate the teaching and assessment of programmes, as identified by the Head of School, which includes liaison with other College staff. Fulfil the role of class tutor with administrative and pastoral responsibilities. Requirements: Occupationally competent in relevant subject. Possession of a relevant teaching or training qualification (e.g. QTS, QTLS, DTTLS, PGCE, A1, CAVA, TAQA). Experience of teaching on and assessing accredited qualifications from Entry Level to Level 3, 4 or 5. Benefits of working for Reed Further Education/our client: Exclusive representation to leading FE colleges and training providers in the area 1-2-1 Specialist Consultant who will search for jobs on your behalf. CV writing and job interview tips! The ability to sign up to a Health Cash Plan and Reed Discount Club. Entitlement to Statutory Sick Pay, Statutory Maternity, Paternity and Adoption Pay, Parental Leave and Antenatal/Pre-Adoption Appointment Payment Access to Training and Development - Reed Assessment Centre - Reed Learning. Eye Test and Spectacle Vouchers Great referral bonus' (up to £200 per successful referral!) To apply for this role, please send us your updated CV by clicking 'Apply Now'. Your application should demonstrate your passion for educational support and your commitment to safeguarding and promoting the welfare of children and young people. Not looking for a teaching role? We are also registering support staff, assessors and technicians, and other FE positions including HR, finance, facilities, administrators. We also have a specialist team of interim and senior management consultants with over 20 years' experience in the sector. "All candidates who register with Reed Further Education will have 2 years' referencing taken up and will be required to have a DBS check completed. All offers are conditional upon satisfactory background checks - If you are on the Barred List, it is against the law to apply and to be hired for a role that includes regulated activity with the concerned group."
Construction Lecturer / Assessor Salary: £25 - £50 per hour / Ranging from £28,000 - £45,000 per annum Location: We are recruiting in several FE locations across the North. Job Type: Temporary and Permanent positions available. Working Hours: Part-time and Full-time positions available. Are you an experienced and resilient Construction Lecturer ? Would you like to work with young people undertaking vocational study programmes? If so, read on to find out how to join the UK's leading Further Education recruiter with additional benefits, offers and referral schemes. Reed Further Education are a leading recruitment agency working with Colleges, Prisons, Universities, and Training Providers across the UK. We are always looking for talented and aspiring Lecturers to join our team and help us deliver high-quality education to learners. Available Roles Reed Further Education are excited to work with Further Education Colleges across the North to recruit Lecturers to deliver accredited courses to young people.We are particularly interested in speaking to Lecturers of: Bricklaying Electrical Installation Multi-Skills Plumbing and Gas Plastering Carpentry and Joinery Construction Plant Operations HVAC (Heating, Ventilation & Air Conditioning) Fabrication and Welding Renewable Technologies CAD Day-to-Day of the role: Plan, deliver and assess vocational courses in the College. Co-ordinate the teaching and assessment of programmes, as identified by the Head of School, which includes liaison with other College staff. Fulfil the role of class tutor with administrative and pastoral responsibilities. Requirements: Occupationally competent in relevant subject. Possession of a relevant teaching or training qualification (e.g. QTS, QTLS, DTTLS, PGCE, A1, CAVA, TAQA). Experience of teaching on and assessing accredited qualifications from Entry Level to Level 3, 4 or 5. Benefits of working for Reed Further Education/our client: Exclusive representation to leading FE colleges and training providers in the area 1-2-1 Specialist Consultant who will search for jobs on your behalf. CV writing and job interview tips! The ability to sign up to a Health Cash Plan and Reed Discount Club. Entitlement to Statutory Sick Pay, Statutory Maternity, Paternity and Adoption Pay, Parental Leave and Antenatal/Pre-Adoption Appointment Payment Access to Training and Development - Reed Assessment Centre - Reed Learning. Eye Test and Spectacle Vouchers Great referral bonus' (up to £200 per successful referral!) To apply for this role, please send us your updated CV by clicking 'Apply Now'. Your application should demonstrate your passion for educational support and your commitment to safeguarding and promoting the welfare of children and young people. Not looking for a teaching role? We are also registering support staff, assessors and technicians, and other FE positions including HR, finance, facilities, administrators. We also have a specialist team of interim and senior management consultants with over 20 years' experience in the sector. "All candidates who register with Reed Further Education will have 2 years' referencing taken up and will be required to have a DBS check completed. All offers are conditional upon satisfactory background checks - If you are on the Barred List, it is against the law to apply and to be hired for a role that includes regulated activity with the concerned group."
May 16, 2026
Seasonal
Construction Lecturer / Assessor Salary: £25 - £50 per hour / Ranging from £28,000 - £45,000 per annum Location: We are recruiting in several FE locations across the North. Job Type: Temporary and Permanent positions available. Working Hours: Part-time and Full-time positions available. Are you an experienced and resilient Construction Lecturer ? Would you like to work with young people undertaking vocational study programmes? If so, read on to find out how to join the UK's leading Further Education recruiter with additional benefits, offers and referral schemes. Reed Further Education are a leading recruitment agency working with Colleges, Prisons, Universities, and Training Providers across the UK. We are always looking for talented and aspiring Lecturers to join our team and help us deliver high-quality education to learners. Available Roles Reed Further Education are excited to work with Further Education Colleges across the North to recruit Lecturers to deliver accredited courses to young people.We are particularly interested in speaking to Lecturers of: Bricklaying Electrical Installation Multi-Skills Plumbing and Gas Plastering Carpentry and Joinery Construction Plant Operations HVAC (Heating, Ventilation & Air Conditioning) Fabrication and Welding Renewable Technologies CAD Day-to-Day of the role: Plan, deliver and assess vocational courses in the College. Co-ordinate the teaching and assessment of programmes, as identified by the Head of School, which includes liaison with other College staff. Fulfil the role of class tutor with administrative and pastoral responsibilities. Requirements: Occupationally competent in relevant subject. Possession of a relevant teaching or training qualification (e.g. QTS, QTLS, DTTLS, PGCE, A1, CAVA, TAQA). Experience of teaching on and assessing accredited qualifications from Entry Level to Level 3, 4 or 5. Benefits of working for Reed Further Education/our client: Exclusive representation to leading FE colleges and training providers in the area 1-2-1 Specialist Consultant who will search for jobs on your behalf. CV writing and job interview tips! The ability to sign up to a Health Cash Plan and Reed Discount Club. Entitlement to Statutory Sick Pay, Statutory Maternity, Paternity and Adoption Pay, Parental Leave and Antenatal/Pre-Adoption Appointment Payment Access to Training and Development - Reed Assessment Centre - Reed Learning. Eye Test and Spectacle Vouchers Great referral bonus' (up to £200 per successful referral!) To apply for this role, please send us your updated CV by clicking 'Apply Now'. Your application should demonstrate your passion for educational support and your commitment to safeguarding and promoting the welfare of children and young people. Not looking for a teaching role? We are also registering support staff, assessors and technicians, and other FE positions including HR, finance, facilities, administrators. We also have a specialist team of interim and senior management consultants with over 20 years' experience in the sector. "All candidates who register with Reed Further Education will have 2 years' referencing taken up and will be required to have a DBS check completed. All offers are conditional upon satisfactory background checks - If you are on the Barred List, it is against the law to apply and to be hired for a role that includes regulated activity with the concerned group."
Shift Engineer - London Join our team at CBRE Global Workplace Solutions We're seeking a skilled and experienced Shift Engineer to join our team in London. As a Shift Engineer, you will play a critical role in delivering high quality maintenance services to our clients on this high end commercial. About the Role Delivering routine planned preventative maintenance tasks across HV and LV distribution systems, plant and equipment, and HVAC mechanical cooling and heating systems Monitoring Building Management Systems (BMS) for running and alarm conditions Attending to air conditioning related client issues Conducting building walk rounds, taking meter readings, and investigating faults Preparing accurate and timely reports Ensuring corrective and repair works are carried out in accordance with current regulations Assisting with installation works and participating in emergency call out rosters Developing a comprehensive understanding of our portfolio buildings, their layouts, functions, and complexities Building strong relationships with Facilities Managers, client staff, and representatives Endorsing safe working practices, quality standards, and best practice methods Volunteering ideas and initiatives to improve service levels and delivery Requirements City & Guilds Electrical Competency Parts 1 & 2 or equivalent Good building services knowledge and experience in critical environments Excellent customer relationship skills Working knowledge of "Permit to work" systems and technical drawings Experience with CMMS and BMS systems Time served electrical apprenticeship or equivalent experience Experience working in a banking environment or similar sector HV switching qualification/experience 17th Edition IEE Regulations Experience with Microsoft Office applicationsACoPs L8 What We Offer Competitive salary and benefits package Opportunity to work with a leading global provider of integrated facilities and corporate real estate management Collaborative and dynamic work environment Professional development and growth opportunities If you're a skilled and experienced Shift Engineer looking for a new challenge, apply now!
May 16, 2026
Full time
Shift Engineer - London Join our team at CBRE Global Workplace Solutions We're seeking a skilled and experienced Shift Engineer to join our team in London. As a Shift Engineer, you will play a critical role in delivering high quality maintenance services to our clients on this high end commercial. About the Role Delivering routine planned preventative maintenance tasks across HV and LV distribution systems, plant and equipment, and HVAC mechanical cooling and heating systems Monitoring Building Management Systems (BMS) for running and alarm conditions Attending to air conditioning related client issues Conducting building walk rounds, taking meter readings, and investigating faults Preparing accurate and timely reports Ensuring corrective and repair works are carried out in accordance with current regulations Assisting with installation works and participating in emergency call out rosters Developing a comprehensive understanding of our portfolio buildings, their layouts, functions, and complexities Building strong relationships with Facilities Managers, client staff, and representatives Endorsing safe working practices, quality standards, and best practice methods Volunteering ideas and initiatives to improve service levels and delivery Requirements City & Guilds Electrical Competency Parts 1 & 2 or equivalent Good building services knowledge and experience in critical environments Excellent customer relationship skills Working knowledge of "Permit to work" systems and technical drawings Experience with CMMS and BMS systems Time served electrical apprenticeship or equivalent experience Experience working in a banking environment or similar sector HV switching qualification/experience 17th Edition IEE Regulations Experience with Microsoft Office applicationsACoPs L8 What We Offer Competitive salary and benefits package Opportunity to work with a leading global provider of integrated facilities and corporate real estate management Collaborative and dynamic work environment Professional development and growth opportunities If you're a skilled and experienced Shift Engineer looking for a new challenge, apply now!
Construction Lecturer / Assessor Salary: £25 - £50 per hour / Ranging from £28,000 - £45,000 per annum Location: We are recruiting in several FE locations across the North. Job Type: Temporary and Permanent positions available. Working Hours: Part-time and Full-time positions available. Are you an experienced and resilient Construction Lecturer ? Would you like to work with young people undertaking vocational study programmes? If so, read on to find out how to join the UK's leading Further Education recruiter with additional benefits, offers and referral schemes. Reed Further Education are a leading recruitment agency working with Colleges, Prisons, Universities, and Training Providers across the UK. We are always looking for talented and aspiring Lecturers to join our team and help us deliver high-quality education to learners. Available Roles Reed Further Education are excited to work with Further Education Colleges across the North to recruit Lecturers to deliver accredited courses to young people.We are particularly interested in speaking to Lecturers of: Bricklaying Electrical Installation Multi-Skills Plumbing and Gas Plastering Carpentry and Joinery Construction Plant Operations HVAC (Heating, Ventilation & Air Conditioning) Fabrication and Welding Renewable Technologies CAD Day-to-Day of the role: Plan, deliver and assess vocational courses in the College. Co-ordinate the teaching and assessment of programmes, as identified by the Head of School, which includes liaison with other College staff. Fulfil the role of class tutor with administrative and pastoral responsibilities. Requirements: Occupationally competent in relevant subject. Possession of a relevant teaching or training qualification (e.g. QTS, QTLS, DTTLS, PGCE, A1, CAVA, TAQA). Experience of teaching on and assessing accredited qualifications from Entry Level to Level 3, 4 or 5. Benefits of working for Reed Further Education/our client: Exclusive representation to leading FE colleges and training providers in the area 1-2-1 Specialist Consultant who will search for jobs on your behalf. CV writing and job interview tips! The ability to sign up to a Health Cash Plan and Reed Discount Club. Entitlement to Statutory Sick Pay, Statutory Maternity, Paternity and Adoption Pay, Parental Leave and Antenatal/Pre-Adoption Appointment Payment Access to Training and Development - Reed Assessment Centre - Reed Learning. Eye Test and Spectacle Vouchers Great referral bonus' (up to £200 per successful referral!) To apply for this role, please send us your updated CV by clicking 'Apply Now'. Your application should demonstrate your passion for educational support and your commitment to safeguarding and promoting the welfare of children and young people. Not looking for a teaching role? We are also registering support staff, assessors and technicians, and other FE positions including HR, finance, facilities, administrators. We also have a specialist team of interim and senior management consultants with over 20 years' experience in the sector. "All candidates who register with Reed Further Education will have 2 years' referencing taken up and will be required to have a DBS check completed. All offers are conditional upon satisfactory background checks - If you are on the Barred List, it is against the law to apply and to be hired for a role that includes regulated activity with the concerned group."
May 15, 2026
Seasonal
Construction Lecturer / Assessor Salary: £25 - £50 per hour / Ranging from £28,000 - £45,000 per annum Location: We are recruiting in several FE locations across the North. Job Type: Temporary and Permanent positions available. Working Hours: Part-time and Full-time positions available. Are you an experienced and resilient Construction Lecturer ? Would you like to work with young people undertaking vocational study programmes? If so, read on to find out how to join the UK's leading Further Education recruiter with additional benefits, offers and referral schemes. Reed Further Education are a leading recruitment agency working with Colleges, Prisons, Universities, and Training Providers across the UK. We are always looking for talented and aspiring Lecturers to join our team and help us deliver high-quality education to learners. Available Roles Reed Further Education are excited to work with Further Education Colleges across the North to recruit Lecturers to deliver accredited courses to young people.We are particularly interested in speaking to Lecturers of: Bricklaying Electrical Installation Multi-Skills Plumbing and Gas Plastering Carpentry and Joinery Construction Plant Operations HVAC (Heating, Ventilation & Air Conditioning) Fabrication and Welding Renewable Technologies CAD Day-to-Day of the role: Plan, deliver and assess vocational courses in the College. Co-ordinate the teaching and assessment of programmes, as identified by the Head of School, which includes liaison with other College staff. Fulfil the role of class tutor with administrative and pastoral responsibilities. Requirements: Occupationally competent in relevant subject. Possession of a relevant teaching or training qualification (e.g. QTS, QTLS, DTTLS, PGCE, A1, CAVA, TAQA). Experience of teaching on and assessing accredited qualifications from Entry Level to Level 3, 4 or 5. Benefits of working for Reed Further Education/our client: Exclusive representation to leading FE colleges and training providers in the area 1-2-1 Specialist Consultant who will search for jobs on your behalf. CV writing and job interview tips! The ability to sign up to a Health Cash Plan and Reed Discount Club. Entitlement to Statutory Sick Pay, Statutory Maternity, Paternity and Adoption Pay, Parental Leave and Antenatal/Pre-Adoption Appointment Payment Access to Training and Development - Reed Assessment Centre - Reed Learning. Eye Test and Spectacle Vouchers Great referral bonus' (up to £200 per successful referral!) To apply for this role, please send us your updated CV by clicking 'Apply Now'. Your application should demonstrate your passion for educational support and your commitment to safeguarding and promoting the welfare of children and young people. Not looking for a teaching role? We are also registering support staff, assessors and technicians, and other FE positions including HR, finance, facilities, administrators. We also have a specialist team of interim and senior management consultants with over 20 years' experience in the sector. "All candidates who register with Reed Further Education will have 2 years' referencing taken up and will be required to have a DBS check completed. All offers are conditional upon satisfactory background checks - If you are on the Barred List, it is against the law to apply and to be hired for a role that includes regulated activity with the concerned group."
JLL empowers you to shape a brighter way .Our people at JLL are shaping the future of real estate for a better world by combining world class services, advisory and technology for our clients. We are committed to hiring the best, most talented people and empowering them to thrive, grow meaningful careers and to find a place where they belong. Whether you've got deep experience in commercial real estate, skilled trades or technology, or you're looking to apply your relevant experience to a new industry, join our team as we help shape a brighter way forward. We are currently recruiting for a Residential Maintenance Engineer to work on one of our high-end, prestigious client sites in London Mayfair. The site in itself is a mixed commercial and retail and residential building and one of newest in the local area. The main aim of this is to support the Supervisor and the team on maintaining the mechanical and electrical equipment and ensure we deliver our SLA and KPI as outlined and agreed. You will be an integral part of the established team on this site. The successful candidate will be required required to work Monday to Friday, 8-5pm. Purpose: Provision of all-round engineering support, maintaining the building infrastructure. Have a detailed understanding of all new or current Building Services systems and contingency procedures within the buildings and complying with the Health & Safety/building codes of practice.It is the Engineers role to support the Contract Delivery Manager at Park House Apartments by being the dedicated engineer for the apartments and an integral member of the team delivering engineering excellence across the full spectrum of services.The hours of work are days only (08:00 - 17:00) "this could change based on the requirements of the property" there will also be a need to be on a ON-CALL rota for out of hours attendance in the event of emergency. Duties and Responsibilities: Operate all systems within the buildings in a competent, effective and efficient manner Issue relevant site Permits as part of the Safe System of Work Completion of PPM and reactive tasks and update the system. Ensure that daily tours are completed and repair or report any defects found via the Landlord helpdesk Identification of materials required to be ordered in a timely manner and completion of the internal Materials Request Form Comply with both statutory and company health, safety and environmental regulations and policies. Timely implementation and recording of statutory inspections including accurate recording of fire, access equipment and water hygiene records within their specified folders. Ensure that Specialist Service Provider worksheets are signed off, the quality of work is inspected and recommendations are escalated to the Contract Delivery Manager The Shift team will ensure that Plant areas, workshops, stores, changing/rest areas etc. are kept to the highest level of housekeepingThe Engineer will be expected to operate and trouble shoot all building systems but not be limited to the following: Building Management Systems and electrical monitoring Blind Control system Air handling, air conditioning and terminal units - VAV and CRAC Window Vent Systems Cooling tower plant Domestic water services Fire prevention and detection systems + Sprinklers and wet risers Fire alarm and voice alarm VESDA Fire suppression Variable speed drives Generators, load banks and controls AC, DC single phase and three phase motors UPS systems, batteries, static switches and associated controls Emergency lighting High and Low voltage switch panels and associated breakers Skills: Approved apprenticeship or appropriate experience within Building Services Excellent communication skills and the ability to deal with staff and Customers at all levels Formal qualification in mechanical engineering Experience as an end user of a Building Management Systems Intermediate computer literacy using Windows Office applications (Word, Excel and Outlook) Self-motivated and able to work on own initiative as well as part of a team Excellent numeracy and literacy skills, with experience of report writing Qualifications: Previously Pressure systems Authorised Person C&G or equivilent in Mechanical Engineering HND/HNC Qualified Be conversant with current Health and Safety legislation with relevance to safe working practices. Sound level of administration/organisational skills Personal Attributes: Reliable and conscientious Pro-active in achieving the highest standard of operation - must be enthusiastic to deliver a good service to the Customer Ability to lead, motivate and direct a small team of technicians/operatives Well-presented and approachable manner Confidence and commitment to providing a high quality, professional service Ability to develop a good understanding of the customers' business requirements Good written and verbal communication skills Ability to prioritise work tasks Adaptable and flexible in approach to work required Effective problem solving skills Ability to remain calm under pressure Reliable Detail conscious Employee Benefits: Overtime x1.5 on weekday and x2 on weekends + day in lieu on bank holidays Standby rate is £15 per day and £50 on bank holidays 24 days holiday plus bank holidays (pro rata into shifts for shift workers) Ability to buy and sell holidays - buy 5 days & sell 2 days Life assurance Auto-enrolment company pension scheme Employee Assistance Program (EAP) Cycle to work scheme Purchase an electric vehicle via salary sacrifice Employee discounts with various brands Learning and development programs, training and career opportunities. Location: On-site -London, GBRIf this job description resonates with you, we encourage you to apply even if you don't meet all of the requirements. We're interested in getting to know you and what you bring to the table!At JLL, we harness the power of artificial intelligence (AI) to efficiently accelerate meaningful connections between candidates and opportunities. Using AI capabilities, we analyze your application for relevant skills, experiences, and qualifications to generate valuable insights about how your unique profile aligns with the specific requirements of the role you're pursuing. JLL Privacy Notice Jones Lang LaSalle (JLL), together with its subsidiaries and affiliates, is a leading global provider of real estate and investment management services. We take our responsibility to protect the personal information provided to us seriously. Generally the personal information we collect from you are for the purposes of processing in connection with JLL's recruitment process. We endeavour to keep your personal information secure with appropriate level of security and keep for as long as we need it for legitimate business or legal reasons. We will then delete it safely and securely.For more information about how JLL processes your personal data, please view our .For additional details please see our career site pages for each country.For candidates in the United States, please see a full copy of our Equal Employment Opportunity policy .Jones Lang LaSalle ("JLL") is an Equal Opportunity Employer and is committed to working with and providing reasonable accommodations to individuals with disabilities. If you need a reasonable accommodation because of a disability for any part of the employment process - including the online application and/or overall selection process - you may email us at . This email is only to request an accommodation. Please direct any other general recruiting inquiries to our page > I want to work for JLL.At JLL, we give you the opportunity, knowledge and tools to own your success, because we value what makes each of us unique. We help our people
May 15, 2026
Full time
JLL empowers you to shape a brighter way .Our people at JLL are shaping the future of real estate for a better world by combining world class services, advisory and technology for our clients. We are committed to hiring the best, most talented people and empowering them to thrive, grow meaningful careers and to find a place where they belong. Whether you've got deep experience in commercial real estate, skilled trades or technology, or you're looking to apply your relevant experience to a new industry, join our team as we help shape a brighter way forward. We are currently recruiting for a Residential Maintenance Engineer to work on one of our high-end, prestigious client sites in London Mayfair. The site in itself is a mixed commercial and retail and residential building and one of newest in the local area. The main aim of this is to support the Supervisor and the team on maintaining the mechanical and electrical equipment and ensure we deliver our SLA and KPI as outlined and agreed. You will be an integral part of the established team on this site. The successful candidate will be required required to work Monday to Friday, 8-5pm. Purpose: Provision of all-round engineering support, maintaining the building infrastructure. Have a detailed understanding of all new or current Building Services systems and contingency procedures within the buildings and complying with the Health & Safety/building codes of practice.It is the Engineers role to support the Contract Delivery Manager at Park House Apartments by being the dedicated engineer for the apartments and an integral member of the team delivering engineering excellence across the full spectrum of services.The hours of work are days only (08:00 - 17:00) "this could change based on the requirements of the property" there will also be a need to be on a ON-CALL rota for out of hours attendance in the event of emergency. Duties and Responsibilities: Operate all systems within the buildings in a competent, effective and efficient manner Issue relevant site Permits as part of the Safe System of Work Completion of PPM and reactive tasks and update the system. Ensure that daily tours are completed and repair or report any defects found via the Landlord helpdesk Identification of materials required to be ordered in a timely manner and completion of the internal Materials Request Form Comply with both statutory and company health, safety and environmental regulations and policies. Timely implementation and recording of statutory inspections including accurate recording of fire, access equipment and water hygiene records within their specified folders. Ensure that Specialist Service Provider worksheets are signed off, the quality of work is inspected and recommendations are escalated to the Contract Delivery Manager The Shift team will ensure that Plant areas, workshops, stores, changing/rest areas etc. are kept to the highest level of housekeepingThe Engineer will be expected to operate and trouble shoot all building systems but not be limited to the following: Building Management Systems and electrical monitoring Blind Control system Air handling, air conditioning and terminal units - VAV and CRAC Window Vent Systems Cooling tower plant Domestic water services Fire prevention and detection systems + Sprinklers and wet risers Fire alarm and voice alarm VESDA Fire suppression Variable speed drives Generators, load banks and controls AC, DC single phase and three phase motors UPS systems, batteries, static switches and associated controls Emergency lighting High and Low voltage switch panels and associated breakers Skills: Approved apprenticeship or appropriate experience within Building Services Excellent communication skills and the ability to deal with staff and Customers at all levels Formal qualification in mechanical engineering Experience as an end user of a Building Management Systems Intermediate computer literacy using Windows Office applications (Word, Excel and Outlook) Self-motivated and able to work on own initiative as well as part of a team Excellent numeracy and literacy skills, with experience of report writing Qualifications: Previously Pressure systems Authorised Person C&G or equivilent in Mechanical Engineering HND/HNC Qualified Be conversant with current Health and Safety legislation with relevance to safe working practices. Sound level of administration/organisational skills Personal Attributes: Reliable and conscientious Pro-active in achieving the highest standard of operation - must be enthusiastic to deliver a good service to the Customer Ability to lead, motivate and direct a small team of technicians/operatives Well-presented and approachable manner Confidence and commitment to providing a high quality, professional service Ability to develop a good understanding of the customers' business requirements Good written and verbal communication skills Ability to prioritise work tasks Adaptable and flexible in approach to work required Effective problem solving skills Ability to remain calm under pressure Reliable Detail conscious Employee Benefits: Overtime x1.5 on weekday and x2 on weekends + day in lieu on bank holidays Standby rate is £15 per day and £50 on bank holidays 24 days holiday plus bank holidays (pro rata into shifts for shift workers) Ability to buy and sell holidays - buy 5 days & sell 2 days Life assurance Auto-enrolment company pension scheme Employee Assistance Program (EAP) Cycle to work scheme Purchase an electric vehicle via salary sacrifice Employee discounts with various brands Learning and development programs, training and career opportunities. Location: On-site -London, GBRIf this job description resonates with you, we encourage you to apply even if you don't meet all of the requirements. We're interested in getting to know you and what you bring to the table!At JLL, we harness the power of artificial intelligence (AI) to efficiently accelerate meaningful connections between candidates and opportunities. Using AI capabilities, we analyze your application for relevant skills, experiences, and qualifications to generate valuable insights about how your unique profile aligns with the specific requirements of the role you're pursuing. JLL Privacy Notice Jones Lang LaSalle (JLL), together with its subsidiaries and affiliates, is a leading global provider of real estate and investment management services. We take our responsibility to protect the personal information provided to us seriously. Generally the personal information we collect from you are for the purposes of processing in connection with JLL's recruitment process. We endeavour to keep your personal information secure with appropriate level of security and keep for as long as we need it for legitimate business or legal reasons. We will then delete it safely and securely.For more information about how JLL processes your personal data, please view our .For additional details please see our career site pages for each country.For candidates in the United States, please see a full copy of our Equal Employment Opportunity policy .Jones Lang LaSalle ("JLL") is an Equal Opportunity Employer and is committed to working with and providing reasonable accommodations to individuals with disabilities. If you need a reasonable accommodation because of a disability for any part of the employment process - including the online application and/or overall selection process - you may email us at . This email is only to request an accommodation. Please direct any other general recruiting inquiries to our page > I want to work for JLL.At JLL, we give you the opportunity, knowledge and tools to own your success, because we value what makes each of us unique. We help our people
Service Technician / HVAC Engineer Southampton Regional Travel £40K-£50K + OTE A leading HVAC manufacturer is looking to expand its growing service team with experienced Service Technicians and Junior Engineers looking to break into the industry. With over 20 engineers across the team, a strong pipeline of work, and ongoing investment into apprenticeships and development, this is an excellent opportunity to join a supportive and long-standing engineering business. The Role Planned Preventative Maintenance (PPM) Breakdown, warranty & commissioning work Fault finding, diagnostics & repair of HVAC equipment Customer-facing service work across regional sites Using modern diagnostic software and tools Regional travel typically within 1-2 hours Requirements F-Gas Category 1 essential for experienced engineers NVQ or relevant engineering qualification HVAC / Air Conditioning / Maintenance background preferred Junior engineers & apprentices also considered Strong fault-finding and communication skills Full UK Driving Licence The Package Salary circa £40K-£50K depending on experience Overtime & call-out opportunities New fully equipped Ford Transit van Pension & holiday increases with service Structured training and progression opportunities Supportive multicultural team with engineers ranging from apprentices to senior-level experience This is a great opportunity to join a busy, expanding manufacturer with long-term career prospects and a strong team environment.
May 15, 2026
Full time
Service Technician / HVAC Engineer Southampton Regional Travel £40K-£50K + OTE A leading HVAC manufacturer is looking to expand its growing service team with experienced Service Technicians and Junior Engineers looking to break into the industry. With over 20 engineers across the team, a strong pipeline of work, and ongoing investment into apprenticeships and development, this is an excellent opportunity to join a supportive and long-standing engineering business. The Role Planned Preventative Maintenance (PPM) Breakdown, warranty & commissioning work Fault finding, diagnostics & repair of HVAC equipment Customer-facing service work across regional sites Using modern diagnostic software and tools Regional travel typically within 1-2 hours Requirements F-Gas Category 1 essential for experienced engineers NVQ or relevant engineering qualification HVAC / Air Conditioning / Maintenance background preferred Junior engineers & apprentices also considered Strong fault-finding and communication skills Full UK Driving Licence The Package Salary circa £40K-£50K depending on experience Overtime & call-out opportunities New fully equipped Ford Transit van Pension & holiday increases with service Structured training and progression opportunities Supportive multicultural team with engineers ranging from apprentices to senior-level experience This is a great opportunity to join a busy, expanding manufacturer with long-term career prospects and a strong team environment.
IT Support Engineer - Business Continuity Recovery Centre Technician Farnborough, Hampshire - UK Drives License is essential Full-time Permanent On-call rota for 1 week (7 days out of a month - paid) Overview We're recruiting for an IT Support Technician to work within a Business Continuity / Disaster Recovery Centre environment. This is a hands-on, technically varied role supporting business-critical IT systems during customer rehearsals and live recovery scenarios. You'll be responsible for ensuring the recovery centre is operational, technically ready, and capable of supporting customers during high-impact events. This role offers exposure to infrastructure, networking, Windows environments, and customer-facing incident support. Key Responsibilities Provide technical support to customers during recovery rehearsals and live invocations Support desktop, hardware, connectivity, and infrastructure-related issues Attend pre-test meetings and produce pre- and post-test documentation Troubleshoot and resolve incidents through to completion Support relocation and invocation activity at customer sites when required Assist with the implementation of services for new customers, including IT and communications installations Act as a failover support resource to other regional recovery centres Ensure full functionality of site facilities including UPS, generators, air conditioning, lighting, and connectivity Provide out-of-hours and on-call support as part of a 24/7 rota Maintain technical documentation, site guides, and user guides Support health & safety, site security, and compliance requirements Monitor and report potential security or fraudulent activity in line with company policies Technical Skills & Experience Required Windows desktop support (Intel/Windows environments) Experience using imaging tools such as Symantec Ghost Knowledge of Windows Server operating systems Understanding of networking concepts , including switches and routers Exposure to voice and data communications Strong fault-finding and diagnostic skills Experience supporting hardware, peripherals, and connectivity Ability to work in a structured, process-driven technical environment Personal & Professional Attributes Professional, presentable, and customer-focused Confident communicating with internal teams and external customers Comfortable working under pressure in live incident scenarios Able to work independently and use initiative Flexible approach to working hours, including participation in an on-call rota due to it being a enviroment that operates 24?7 Strong work ethic with a proactive mindset What's On Offer A technically hands-on role supporting business-critical IT environments Exposure to infrastructure, networking, and recovery technologies Paid on-call rota and out-of-hours support Clear opportunities for technical development and progression A fast-paced, operational environment where no two days are the same ECS Recruitment Group Ltd is acting as an Employment Agency in relation to this vacancy.
May 15, 2026
Full time
IT Support Engineer - Business Continuity Recovery Centre Technician Farnborough, Hampshire - UK Drives License is essential Full-time Permanent On-call rota for 1 week (7 days out of a month - paid) Overview We're recruiting for an IT Support Technician to work within a Business Continuity / Disaster Recovery Centre environment. This is a hands-on, technically varied role supporting business-critical IT systems during customer rehearsals and live recovery scenarios. You'll be responsible for ensuring the recovery centre is operational, technically ready, and capable of supporting customers during high-impact events. This role offers exposure to infrastructure, networking, Windows environments, and customer-facing incident support. Key Responsibilities Provide technical support to customers during recovery rehearsals and live invocations Support desktop, hardware, connectivity, and infrastructure-related issues Attend pre-test meetings and produce pre- and post-test documentation Troubleshoot and resolve incidents through to completion Support relocation and invocation activity at customer sites when required Assist with the implementation of services for new customers, including IT and communications installations Act as a failover support resource to other regional recovery centres Ensure full functionality of site facilities including UPS, generators, air conditioning, lighting, and connectivity Provide out-of-hours and on-call support as part of a 24/7 rota Maintain technical documentation, site guides, and user guides Support health & safety, site security, and compliance requirements Monitor and report potential security or fraudulent activity in line with company policies Technical Skills & Experience Required Windows desktop support (Intel/Windows environments) Experience using imaging tools such as Symantec Ghost Knowledge of Windows Server operating systems Understanding of networking concepts , including switches and routers Exposure to voice and data communications Strong fault-finding and diagnostic skills Experience supporting hardware, peripherals, and connectivity Ability to work in a structured, process-driven technical environment Personal & Professional Attributes Professional, presentable, and customer-focused Confident communicating with internal teams and external customers Comfortable working under pressure in live incident scenarios Able to work independently and use initiative Flexible approach to working hours, including participation in an on-call rota due to it being a enviroment that operates 24?7 Strong work ethic with a proactive mindset What's On Offer A technically hands-on role supporting business-critical IT environments Exposure to infrastructure, networking, and recovery technologies Paid on-call rota and out-of-hours support Clear opportunities for technical development and progression A fast-paced, operational environment where no two days are the same ECS Recruitment Group Ltd is acting as an Employment Agency in relation to this vacancy.
Allegis Global Solutions Limited (AGS)
Reading, Berkshire
Duties and Responsibilities: Operate all systems within the buildings in a competent, effective, and efficient manner. Issue relevant site Permits as part of the Safe System of Work. Completion of PPM and Reactive Tasks and update the electronic workflow system keeping the records compliant. Ensure that daily checks are completed and repair, report any defects found via the FM helpdesk. Identification of materials required to be ordered & installed in a timely manner. Comply with both statutory and company health, safety and environmental regulations and policies. Ensure that Specialist Service Provider worksheets are reviewed & signed off, the quality of work is inspected, and recommendations are escalated to the Supervisor. The Site team will ensure that Plant areas, workshops, stores, changing/rest areas etc. are kept to the highest level of housekeeping The Engineer will be expected to work, and trouble shoot all building systems but not be limited to the following: Decorating and general fabric repairs Small plumbing repairs Building Management Systems & Minor Electrical Monitoring (Training Given). HVAC Systems, Including Humidifiers (Training Given). Air Handling, Air Conditioning & Chillers (Training Given). Domestic Water Services & Plumbing. Pumps, Motors & Variable Speed Drive (Training Given). Hot Water Calorifiers (Training Given). Fire Systems (Training Given). Previous knowledge of a compliance role an advantage Skills: Appropriate experience within Building Fabric Services Excellent communication skills and the ability to deal with staff and Customers at all levels Experience as an end user of a Building Management Systems (Trend). (Training Given). Intermediate computer literacy using Windows Office applications (Word, Excel, and Outlook) PDA & Tablet use. Self-motivated and able to work on own initiative as well as part of a team. Excellent numeracy and literacy skills, with experience of report writing. Be able to adapt and work as a team outside of their trade but within their capabilities. Qualifications: Advantage C&G or equivalent experience in Fabric Engineering. Legionella Awareness - L8 ACOP. Be conversant with current Health and Safety legislation with relevance to safe working practices. Sound level of administration/organisational skills & computer skills.
May 13, 2026
Contractor
Duties and Responsibilities: Operate all systems within the buildings in a competent, effective, and efficient manner. Issue relevant site Permits as part of the Safe System of Work. Completion of PPM and Reactive Tasks and update the electronic workflow system keeping the records compliant. Ensure that daily checks are completed and repair, report any defects found via the FM helpdesk. Identification of materials required to be ordered & installed in a timely manner. Comply with both statutory and company health, safety and environmental regulations and policies. Ensure that Specialist Service Provider worksheets are reviewed & signed off, the quality of work is inspected, and recommendations are escalated to the Supervisor. The Site team will ensure that Plant areas, workshops, stores, changing/rest areas etc. are kept to the highest level of housekeeping The Engineer will be expected to work, and trouble shoot all building systems but not be limited to the following: Decorating and general fabric repairs Small plumbing repairs Building Management Systems & Minor Electrical Monitoring (Training Given). HVAC Systems, Including Humidifiers (Training Given). Air Handling, Air Conditioning & Chillers (Training Given). Domestic Water Services & Plumbing. Pumps, Motors & Variable Speed Drive (Training Given). Hot Water Calorifiers (Training Given). Fire Systems (Training Given). Previous knowledge of a compliance role an advantage Skills: Appropriate experience within Building Fabric Services Excellent communication skills and the ability to deal with staff and Customers at all levels Experience as an end user of a Building Management Systems (Trend). (Training Given). Intermediate computer literacy using Windows Office applications (Word, Excel, and Outlook) PDA & Tablet use. Self-motivated and able to work on own initiative as well as part of a team. Excellent numeracy and literacy skills, with experience of report writing. Be able to adapt and work as a team outside of their trade but within their capabilities. Qualifications: Advantage C&G or equivalent experience in Fabric Engineering. Legionella Awareness - L8 ACOP. Be conversant with current Health and Safety legislation with relevance to safe working practices. Sound level of administration/organisational skills & computer skills.
Vehicle & Plant Mechanic Location: Nuneaton Contract: Temporary Rate: 21.39 per hour (Umbrella) Overview Experienced Vehicle & Plant Mechanic required to support a busy local authority workshop. Role focuses on maintenance and repair of light vehicles (primarily Ford Transit and Isuzu D-Max), with some exposure to refuse vehicles, road sweepers and plant equipment. Suitable for a highly experienced technician able to work independently, or a semi-retired mechanic seeking flexible workshop-based work. Key Duties Service, repair and maintain light vehicles, plant and equipment Carry out preventative maintenance inspections MOT testing (Class 4 & 7) or working towards qualification Diagnostics, fault finding and breakdown support Welding, fabrication and tyre repairs (desirable) Support air conditioning servicing (desirable) Maintain accurate workshop records and compliance documentation Requirements Strong background in vehicle maintenance (light vehicles essential) Ability to work independently in a workshop environment MOT Tester (or working towards) Good understanding of health & safety Flexible approach to emergency and reactive work We can only consider applications from those eligible to work in the UK for this position. This position will require some additional checks, to ensure you can access the site worked as needed. For more information on this position, please contact Marika Powell at ARM on (phone number removed) or email your CV and covering letter to . Disclaimer: This vacancy is being advertised by either Advanced Resource Managers Limited, Advanced Resource Managers IT Limited or Advanced Resource Managers Engineering Limited ("ARM"). ARM is a specialist talent acquisition and management consultancy. We provide technical contingency recruitment and a portfolio of more complex resource solutions. Our specialist recruitment divisions cover the entire technical arena, including some of the most economically and strategically important industries in the UK and the world today. We will never send your CV without your permission. Where the role is marked as Outside IR35 in the advertisement this is subject to receipt of a final Status Determination Statement from the end Client and may be subject to change.
May 11, 2026
Contractor
Vehicle & Plant Mechanic Location: Nuneaton Contract: Temporary Rate: 21.39 per hour (Umbrella) Overview Experienced Vehicle & Plant Mechanic required to support a busy local authority workshop. Role focuses on maintenance and repair of light vehicles (primarily Ford Transit and Isuzu D-Max), with some exposure to refuse vehicles, road sweepers and plant equipment. Suitable for a highly experienced technician able to work independently, or a semi-retired mechanic seeking flexible workshop-based work. Key Duties Service, repair and maintain light vehicles, plant and equipment Carry out preventative maintenance inspections MOT testing (Class 4 & 7) or working towards qualification Diagnostics, fault finding and breakdown support Welding, fabrication and tyre repairs (desirable) Support air conditioning servicing (desirable) Maintain accurate workshop records and compliance documentation Requirements Strong background in vehicle maintenance (light vehicles essential) Ability to work independently in a workshop environment MOT Tester (or working towards) Good understanding of health & safety Flexible approach to emergency and reactive work We can only consider applications from those eligible to work in the UK for this position. This position will require some additional checks, to ensure you can access the site worked as needed. For more information on this position, please contact Marika Powell at ARM on (phone number removed) or email your CV and covering letter to . Disclaimer: This vacancy is being advertised by either Advanced Resource Managers Limited, Advanced Resource Managers IT Limited or Advanced Resource Managers Engineering Limited ("ARM"). ARM is a specialist talent acquisition and management consultancy. We provide technical contingency recruitment and a portfolio of more complex resource solutions. Our specialist recruitment divisions cover the entire technical arena, including some of the most economically and strategically important industries in the UK and the world today. We will never send your CV without your permission. Where the role is marked as Outside IR35 in the advertisement this is subject to receipt of a final Status Determination Statement from the end Client and may be subject to change.
Ernest Gordon Recruitment Limited
Taunton, Somerset
LEV Engineer (P601 Certified) £42,000 - £46,000 + Progress to Supervisor + Monday to Friday + Company Car + 1.5x Overtime + Hybrid Working Taunton, Somerset Are you an LEV Engineer or similar with your LEVP601, looking to join an industry leading manufacturer of LEV and filtration equipment who offer continued progression into senior management roles? On offer is the opportunity to work for an industry leader in the manufacture and distribution of bespoke filter products both in the UK and beyond. They also offer ongoing servicing and maintenance plans to ensure quality and reliability for their customers. After being established for the last 50 years, they are looking to expand their service team due to an increase in their workload. In this role, you will be provided with the support needed to further devel;op your skillset and move into a supervisory/management position. During this transition you will be working a varied role split between being hands-on and from home. Day to day you will be following up reports to survey remedials/defects highlighted and assisting with quotations. You will also be advising on testing reports as well as being on the tools commissioning, testing or servicing. This role would suit, a LEV Engineer or someone with a background in Local Exhaust Ventilation with LEVP601, looking to progress their career with an industry leading company. The Role Receive guidance and training to progress Hybrid working / In the field Assist with reports and follow servicing and testing Support junior technicians The Person LEV Engineer or similar Looking to step-up into management UK driving license Reference Number: BBBH24441b LEV, Local Exhaust Ventilation, Service, Fume Extraction, Maintenance, Testing, Commissioning, Ventilation, Duct, Airflow, HVAC, Air Conditioning, Bridgewater, Taunton, Somerset If you are interested in this role, click 'apply now' to forward an up-to-date copy of your CV. We are an equal opportunities employer and welcome applications from all suitable candidates. The salary advertised is a guideline for this position. The offered renumeration will be dependent on the extent of your experience, qualifications, and skill set. Ernest Gordon Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job, you accept the T&C's, Privacy Policy and Disclaimers which can be found at our website.
May 11, 2026
Full time
LEV Engineer (P601 Certified) £42,000 - £46,000 + Progress to Supervisor + Monday to Friday + Company Car + 1.5x Overtime + Hybrid Working Taunton, Somerset Are you an LEV Engineer or similar with your LEVP601, looking to join an industry leading manufacturer of LEV and filtration equipment who offer continued progression into senior management roles? On offer is the opportunity to work for an industry leader in the manufacture and distribution of bespoke filter products both in the UK and beyond. They also offer ongoing servicing and maintenance plans to ensure quality and reliability for their customers. After being established for the last 50 years, they are looking to expand their service team due to an increase in their workload. In this role, you will be provided with the support needed to further devel;op your skillset and move into a supervisory/management position. During this transition you will be working a varied role split between being hands-on and from home. Day to day you will be following up reports to survey remedials/defects highlighted and assisting with quotations. You will also be advising on testing reports as well as being on the tools commissioning, testing or servicing. This role would suit, a LEV Engineer or someone with a background in Local Exhaust Ventilation with LEVP601, looking to progress their career with an industry leading company. The Role Receive guidance and training to progress Hybrid working / In the field Assist with reports and follow servicing and testing Support junior technicians The Person LEV Engineer or similar Looking to step-up into management UK driving license Reference Number: BBBH24441b LEV, Local Exhaust Ventilation, Service, Fume Extraction, Maintenance, Testing, Commissioning, Ventilation, Duct, Airflow, HVAC, Air Conditioning, Bridgewater, Taunton, Somerset If you are interested in this role, click 'apply now' to forward an up-to-date copy of your CV. We are an equal opportunities employer and welcome applications from all suitable candidates. The salary advertised is a guideline for this position. The offered renumeration will be dependent on the extent of your experience, qualifications, and skill set. Ernest Gordon Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job, you accept the T&C's, Privacy Policy and Disclaimers which can be found at our website.
HVAC Engineer £45k-£50k Company based near Greenford Job Overview My client are seeking two skilled and motivated professionals to join their Engineering team: an HVAC Engineer and an HVAC Engineer (Ventilation Bias) . Both roles will be responsible for carrying out planned preventative maintenance, reactive callouts and minor project works across a range of HVAC and associated systems, including general fault finding and repair of assets and services. The successful candidates will ensure all work carried out on plant and equipment is accurately recorded and maintained within site manuals, both in hard copy and electronic formats. You will be required to participate in an out-of-hours emergency call-out rota and demonstrate flexibility outside of core working hours when required. Working as part of my clients team, you will develop and maintain effective working relationships with colleagues, clients and customers. A professional and courteous approach when dealing with clients, customers and the general public is essential to uphold and enhance the reputation of my client. You will be expected to continually demonstrate a strong commitment to customer care and maintain clear and effective communication with customers, line management and office support staff at all times. DUTIES Planning and undertaking scheduled maintenance Responding to breakdowns Diagnosing faults Repairing equipment Supervising engineering apprentices Obtaining specialist components, fixtures or fittings Maintaining accurate records Ensuring compliance with company/health and safety legislation Creating maintenance procedures Managing van stocks of supplies and equipment Out of Hours Rota 'on-call' work To develop an extensive knowledge of mechanical, electrical building services and a good understanding of their interfaces with general building works associated with them. To gain knowledge of the employee s handbook, my clients policies and processes and clients ISO system of works. KNOWLEDGE Fault finding, rectification, planned maintenance of split systems, multi systems and VRV systems. service chillers, pumps and all associated chilled water pipework, air handling units, ventilation systems, VRV, VRF, multi and split type air conditioning units, stand-alone/close control units, dry air coolers controls & panels. Sound knowledge of Health and Safety Legislation, Safe Systems of Work and contingency planning Ability to interpret from drawings, instructions and specifications Good communicator, verbally and written, and have a good level of computer literacy and working knowledge of IT systems and packages that include MSN Office, Outlook & Internet Explorer. Self-motivated with the ability to make decisions and resolve problems within clearly defined parameters HVAC Ventilation Bias Engineer Proven experience in the ventilation industry, including ductwork or fire damper testing/remedials - HVAC Ventilation Bias Engineer (E) Knowledge of TR19 guidelines and BSEN 15780 (E) Comfortable working in and around plant rooms, at height, or in confined spaces (E) E - Essential, D - Desirable for both positions; NVQ Level 2/3 (C&G) Heating and Ventilating - Industrial and Commercial Installation (6188-30) or Heating and Ventilating - Ductwork Installation (6188-31) or Planned and Reactive Maintenance on Heating and Ventilating Systems (6188-32) or equivalent (E) NVQ Level 2/3 in Refrigeration and Air Conditioning/City & Guilds 2079 Handling Refrigerants or F-Gas (Category I) certification (D) Fault finding, rectification and planned maintenance experience. (E) Full driving licence (UK (E Knowledge Skills Requirements: - Sound knowledge of Health and Safety Legislation, Safe Systems of Work and contingency planning (E) Ability to interpret from drawings, instructions and specifications (E) Good communicator, verbally and written, and have a good level of computer literacy and working knowledge of IT systems and packages that include MSN Office, Outlook & Internet Explorer. (E) Self-motivated with the ability to make decisions and resolve problems within clearly defined parameters. (E)Substantial practical experience: - have experience of mechanical services, plumbing and heating maintenance on domestic/industrial/commercial systems.(D)Also experience of mechanical maintenance and repairs. (D)Enhanced DBS Can be arranged (D)Confined Space (D)City & Guilds 2365 or 2357 in Electrical Installation or equivalent (D) SKILLS Substantial practical experience required: maintenance in a domestic/industrial/commercial scenario. Must have relevant mechanical qualifications. To always present a professional image: onsite, in the office and to clients. Ability to apply basic problem-solving skills to a variety of situations. Full - Clean driving license that enables the person to drive in the UK. Ability to establish good relationships with internal and external team members. Good levels of verbal and written communication skills. OTHER The ability to travel to a range of sites. Appreciation that there might be out of hours working, agreed in advance. Join our my client as an HVAC Technician where your expertise will contribute significantly to the comfort and satisfaction of our clients! Job Types: Full-time, Permanent Pay: £45,000.00-£50,000.00 per year Benefits: Company pension Cycle to work scheme Health & wellbeing programme Life insurance If this sounds like you please send George your cv in the first instance
May 11, 2026
Full time
HVAC Engineer £45k-£50k Company based near Greenford Job Overview My client are seeking two skilled and motivated professionals to join their Engineering team: an HVAC Engineer and an HVAC Engineer (Ventilation Bias) . Both roles will be responsible for carrying out planned preventative maintenance, reactive callouts and minor project works across a range of HVAC and associated systems, including general fault finding and repair of assets and services. The successful candidates will ensure all work carried out on plant and equipment is accurately recorded and maintained within site manuals, both in hard copy and electronic formats. You will be required to participate in an out-of-hours emergency call-out rota and demonstrate flexibility outside of core working hours when required. Working as part of my clients team, you will develop and maintain effective working relationships with colleagues, clients and customers. A professional and courteous approach when dealing with clients, customers and the general public is essential to uphold and enhance the reputation of my client. You will be expected to continually demonstrate a strong commitment to customer care and maintain clear and effective communication with customers, line management and office support staff at all times. DUTIES Planning and undertaking scheduled maintenance Responding to breakdowns Diagnosing faults Repairing equipment Supervising engineering apprentices Obtaining specialist components, fixtures or fittings Maintaining accurate records Ensuring compliance with company/health and safety legislation Creating maintenance procedures Managing van stocks of supplies and equipment Out of Hours Rota 'on-call' work To develop an extensive knowledge of mechanical, electrical building services and a good understanding of their interfaces with general building works associated with them. To gain knowledge of the employee s handbook, my clients policies and processes and clients ISO system of works. KNOWLEDGE Fault finding, rectification, planned maintenance of split systems, multi systems and VRV systems. service chillers, pumps and all associated chilled water pipework, air handling units, ventilation systems, VRV, VRF, multi and split type air conditioning units, stand-alone/close control units, dry air coolers controls & panels. Sound knowledge of Health and Safety Legislation, Safe Systems of Work and contingency planning Ability to interpret from drawings, instructions and specifications Good communicator, verbally and written, and have a good level of computer literacy and working knowledge of IT systems and packages that include MSN Office, Outlook & Internet Explorer. Self-motivated with the ability to make decisions and resolve problems within clearly defined parameters HVAC Ventilation Bias Engineer Proven experience in the ventilation industry, including ductwork or fire damper testing/remedials - HVAC Ventilation Bias Engineer (E) Knowledge of TR19 guidelines and BSEN 15780 (E) Comfortable working in and around plant rooms, at height, or in confined spaces (E) E - Essential, D - Desirable for both positions; NVQ Level 2/3 (C&G) Heating and Ventilating - Industrial and Commercial Installation (6188-30) or Heating and Ventilating - Ductwork Installation (6188-31) or Planned and Reactive Maintenance on Heating and Ventilating Systems (6188-32) or equivalent (E) NVQ Level 2/3 in Refrigeration and Air Conditioning/City & Guilds 2079 Handling Refrigerants or F-Gas (Category I) certification (D) Fault finding, rectification and planned maintenance experience. (E) Full driving licence (UK (E Knowledge Skills Requirements: - Sound knowledge of Health and Safety Legislation, Safe Systems of Work and contingency planning (E) Ability to interpret from drawings, instructions and specifications (E) Good communicator, verbally and written, and have a good level of computer literacy and working knowledge of IT systems and packages that include MSN Office, Outlook & Internet Explorer. (E) Self-motivated with the ability to make decisions and resolve problems within clearly defined parameters. (E)Substantial practical experience: - have experience of mechanical services, plumbing and heating maintenance on domestic/industrial/commercial systems.(D)Also experience of mechanical maintenance and repairs. (D)Enhanced DBS Can be arranged (D)Confined Space (D)City & Guilds 2365 or 2357 in Electrical Installation or equivalent (D) SKILLS Substantial practical experience required: maintenance in a domestic/industrial/commercial scenario. Must have relevant mechanical qualifications. To always present a professional image: onsite, in the office and to clients. Ability to apply basic problem-solving skills to a variety of situations. Full - Clean driving license that enables the person to drive in the UK. Ability to establish good relationships with internal and external team members. Good levels of verbal and written communication skills. OTHER The ability to travel to a range of sites. Appreciation that there might be out of hours working, agreed in advance. Join our my client as an HVAC Technician where your expertise will contribute significantly to the comfort and satisfaction of our clients! Job Types: Full-time, Permanent Pay: £45,000.00-£50,000.00 per year Benefits: Company pension Cycle to work scheme Health & wellbeing programme Life insurance If this sounds like you please send George your cv in the first instance
Overview Are you looking for a position where you can make a difference, constantly learn new things and be at the forefront of technology,working aspart of the Aviva family? Responsibilities TheRole: Solus MET Technicians are pivotal in our customers story, working in partnership with repair consultants and production team to get the best outcome. Reporting directly to the site Production Lead, it is our Solus MET's that remove and assess any additional damageandrefit to our high standards safeguarding customer satisfaction. Qualifications Desirable qualifications and experience: Working knowledge and experience of vehicle mechanical and suspension repairs ATA MET accreditation LCV experience Relevant mechanical and suspension qualifications Steering Geometry alignment and adjustment Glazing Air Conditioning system evacuation and recharge Working with Plastic repairs Who are Solus? Solus, who are owned by Aviva, are one of the UK leaders in vehicle repairs, returning cars to the road in just 11 days on average and a 4.6/5 star customer rating. With an award-winning apprenticeship programme and winners of other recognised industry awards Solus are proud to be shaping the future of vehicle repair. Why Join Solus? We have so much to offer when it comes to being a Solus colleague: Competitive salary based on location, skills, experience, and qualifications. Bonus opportunity tied to your performance and the overall success of Solus. Company pension scheme with employer contributions. 33 days' holiday (including bank holidays), with the option to buy or sell up to 5 days. Save money with up to 40% discount on Aviva products and other retailer discounts. Share in Aviva's success through the Aviva Save As You Earn scheme. Supportive policies including parental and carer's leave. Wellbeing focus with tools like Group Income Protection and 24/7 GP access. At Solus, we value inclusivity and welcome all applicants. If you're excited but don't tick every box, we encourage you to apply-your unique skills might be just what we need. We guarantee an interview for disabled applicants meeting the minimum criteria-just email us after applying to let us know. Ready to join us? Apply online today, and our team will be in touch within 14 days.
Apr 26, 2026
Full time
Overview Are you looking for a position where you can make a difference, constantly learn new things and be at the forefront of technology,working aspart of the Aviva family? Responsibilities TheRole: Solus MET Technicians are pivotal in our customers story, working in partnership with repair consultants and production team to get the best outcome. Reporting directly to the site Production Lead, it is our Solus MET's that remove and assess any additional damageandrefit to our high standards safeguarding customer satisfaction. Qualifications Desirable qualifications and experience: Working knowledge and experience of vehicle mechanical and suspension repairs ATA MET accreditation LCV experience Relevant mechanical and suspension qualifications Steering Geometry alignment and adjustment Glazing Air Conditioning system evacuation and recharge Working with Plastic repairs Who are Solus? Solus, who are owned by Aviva, are one of the UK leaders in vehicle repairs, returning cars to the road in just 11 days on average and a 4.6/5 star customer rating. With an award-winning apprenticeship programme and winners of other recognised industry awards Solus are proud to be shaping the future of vehicle repair. Why Join Solus? We have so much to offer when it comes to being a Solus colleague: Competitive salary based on location, skills, experience, and qualifications. Bonus opportunity tied to your performance and the overall success of Solus. Company pension scheme with employer contributions. 33 days' holiday (including bank holidays), with the option to buy or sell up to 5 days. Save money with up to 40% discount on Aviva products and other retailer discounts. Share in Aviva's success through the Aviva Save As You Earn scheme. Supportive policies including parental and carer's leave. Wellbeing focus with tools like Group Income Protection and 24/7 GP access. At Solus, we value inclusivity and welcome all applicants. If you're excited but don't tick every box, we encourage you to apply-your unique skills might be just what we need. We guarantee an interview for disabled applicants meeting the minimum criteria-just email us after applying to let us know. Ready to join us? Apply online today, and our team will be in touch within 14 days.
Overview Are you looking for a position where you can make a difference, constantly learn new things and be at the forefront of technology,working aspart of the Aviva family? Responsibilities TheRole: Solus MET Technicians are pivotal in our customers story, working in partnership with repair consultants and production team to get the best outcome. Reporting directly to the site Production Lead, it is our Solus MET's that remove and assess any additional damageandrefit to our high standards safeguarding customer satisfaction. Qualifications Desirable qualifications and experience: Working knowledge and experience of vehicle mechanical and suspension repairs ATA MET accreditation LCV experience Relevant mechanical and suspension qualifications Steering Geometry alignment and adjustment Glazing Air Conditioning system evacuation and recharge Working with Plastic repairs Who are Solus? Solus, who are owned by Aviva, are one of the UK leaders in vehicle repairs, returning cars to the road in just 11 days on average and a 4.6/5 star customer rating. With an award-winning apprenticeship programme and winners of other recognised industry awards Solus are proud to be shaping the future of vehicle repair. Why Join Solus? We have so much to offer when it comes to being a Solus colleague: Competitive salary based on location, skills, experience, and qualifications. Bonus opportunity tied to your performance and the overall success of Solus. Company pension scheme with employer contributions. 33 days' holiday (including bank holidays), with the option to buy or sell up to 5 days. Save money with up to 40% discount on Aviva products and other retailer discounts. Share in Aviva's success through the Aviva Save As You Earn scheme. Supportive policies including parental and carer's leave. Wellbeing focus with tools like Group Income Protection and 24/7 GP access. At Solus, we value inclusivity and welcome all applicants. If you're excited but don't tick every box, we encourage you to apply-your unique skills might be just what we need. We guarantee an interview for disabled applicants meeting the minimum criteria-just email us after applying to let us know. Ready to join us? Apply online today, and our team will be in touch within 14 days.
Apr 26, 2026
Full time
Overview Are you looking for a position where you can make a difference, constantly learn new things and be at the forefront of technology,working aspart of the Aviva family? Responsibilities TheRole: Solus MET Technicians are pivotal in our customers story, working in partnership with repair consultants and production team to get the best outcome. Reporting directly to the site Production Lead, it is our Solus MET's that remove and assess any additional damageandrefit to our high standards safeguarding customer satisfaction. Qualifications Desirable qualifications and experience: Working knowledge and experience of vehicle mechanical and suspension repairs ATA MET accreditation LCV experience Relevant mechanical and suspension qualifications Steering Geometry alignment and adjustment Glazing Air Conditioning system evacuation and recharge Working with Plastic repairs Who are Solus? Solus, who are owned by Aviva, are one of the UK leaders in vehicle repairs, returning cars to the road in just 11 days on average and a 4.6/5 star customer rating. With an award-winning apprenticeship programme and winners of other recognised industry awards Solus are proud to be shaping the future of vehicle repair. Why Join Solus? We have so much to offer when it comes to being a Solus colleague: Competitive salary based on location, skills, experience, and qualifications. Bonus opportunity tied to your performance and the overall success of Solus. Company pension scheme with employer contributions. 33 days' holiday (including bank holidays), with the option to buy or sell up to 5 days. Save money with up to 40% discount on Aviva products and other retailer discounts. Share in Aviva's success through the Aviva Save As You Earn scheme. Supportive policies including parental and carer's leave. Wellbeing focus with tools like Group Income Protection and 24/7 GP access. At Solus, we value inclusivity and welcome all applicants. If you're excited but don't tick every box, we encourage you to apply-your unique skills might be just what we need. We guarantee an interview for disabled applicants meeting the minimum criteria-just email us after applying to let us know. Ready to join us? Apply online today, and our team will be in touch within 14 days.
Overview Are you looking for a position where you can make a difference, constantly learn new things and be at the forefront of technology,working aspart of the Aviva family? Responsibilities TheRole: Solus MET Technicians are pivotal in our customers story, working in partnership with repair consultants and production team to get the best outcome. Reporting directly to the site Production Lead, it is our Solus MET's that remove and assess any additional damageandrefit to our high standards safeguarding customer satisfaction. Qualifications Desirable qualifications and experience: Working knowledge and experience of vehicle mechanical and suspension repairs ATA MET accreditation LCV experience Relevant mechanical and suspension qualifications Steering Geometry alignment and adjustment Glazing Air Conditioning system evacuation and recharge Working with Plastic repairs Who are Solus? Solus, who are owned by Aviva, are one of the UK leaders in vehicle repairs, returning cars to the road in just 11 days on average and a 4.6/5 star customer rating. With an award-winning apprenticeship programme and winners of other recognised industry awards Solus are proud to be shaping the future of vehicle repair. Why Join Solus? We have so much to offer when it comes to being a Solus colleague: Competitive salary based on location, skills, experience, and qualifications. Bonus opportunity tied to your performance and the overall success of Solus. Company pension scheme with employer contributions. 33 days' holiday (including bank holidays), with the option to buy or sell up to 5 days. Save money with up to 40% discount on Aviva products and other retailer discounts. Share in Aviva's success through the Aviva Save As You Earn scheme. Supportive policies including parental and carer's leave. Wellbeing focus with tools like Group Income Protection and 24/7 GP access. At Solus, we value inclusivity and welcome all applicants. If you're excited but don't tick every box, we encourage you to apply-your unique skills might be just what we need. We guarantee an interview for disabled applicants meeting the minimum criteria-just email us after applying to let us know. Ready to join us? Apply online today, and our team will be in touch within 14 days.
Apr 26, 2026
Full time
Overview Are you looking for a position where you can make a difference, constantly learn new things and be at the forefront of technology,working aspart of the Aviva family? Responsibilities TheRole: Solus MET Technicians are pivotal in our customers story, working in partnership with repair consultants and production team to get the best outcome. Reporting directly to the site Production Lead, it is our Solus MET's that remove and assess any additional damageandrefit to our high standards safeguarding customer satisfaction. Qualifications Desirable qualifications and experience: Working knowledge and experience of vehicle mechanical and suspension repairs ATA MET accreditation LCV experience Relevant mechanical and suspension qualifications Steering Geometry alignment and adjustment Glazing Air Conditioning system evacuation and recharge Working with Plastic repairs Who are Solus? Solus, who are owned by Aviva, are one of the UK leaders in vehicle repairs, returning cars to the road in just 11 days on average and a 4.6/5 star customer rating. With an award-winning apprenticeship programme and winners of other recognised industry awards Solus are proud to be shaping the future of vehicle repair. Why Join Solus? We have so much to offer when it comes to being a Solus colleague: Competitive salary based on location, skills, experience, and qualifications. Bonus opportunity tied to your performance and the overall success of Solus. Company pension scheme with employer contributions. 33 days' holiday (including bank holidays), with the option to buy or sell up to 5 days. Save money with up to 40% discount on Aviva products and other retailer discounts. Share in Aviva's success through the Aviva Save As You Earn scheme. Supportive policies including parental and carer's leave. Wellbeing focus with tools like Group Income Protection and 24/7 GP access. At Solus, we value inclusivity and welcome all applicants. If you're excited but don't tick every box, we encourage you to apply-your unique skills might be just what we need. We guarantee an interview for disabled applicants meeting the minimum criteria-just email us after applying to let us know. Ready to join us? Apply online today, and our team will be in touch within 14 days.
Company Overview JCW Energy Services Ltd has evolved from a small mechanical installation company to a nationwide provider of mechanical and electrical installation and maintenance services. With a commitment to customer satisfaction, we deliver innovative solutions that ensure safe, comfortable, and energy-efficient environments. Summary As an HVAC Technician at JCW Energy Services Ltd, you will play a vital role in maintaining and installing ventilation (AHU), chilled water systems, and air conditioning systems. Your expertise will contribute to our mission of providing safe and efficient environments for our clients across the nation. Responsibilities Install, maintain, and repair HVAC systems in various commercial and residential settings. Conduct routine inspections to ensure HVAC systems operate efficiently. Diagnose issues with HVAC systems and provide effective solutions. Collaborate with team members to complete projects on time and within budget. Provide excellent customer service by communicating effectively with clients regarding their HVAC needs. Stay updated on industry trends and advancements in HVAC technology. Using an electronic system to follow your schedule and fill in technician reports. Will be carrying out many different jobs throughout the day in different locations. Cleanliness and organising of work van provided, and keeping it well stocked. To ensure that all tools and other Company issued equipment are maintained in good serviceable order. To attend courses and other training events in compliance with statutory requirements. Reporting to the office daily. Confident in using an electronic system day-to-day. Requirements Proven experience as an HVAC Technician or similar role. Relevant certifications in HVAC or related fields are preferred. Strong troubleshooting skills with attention to detail. Excellent communication skills for effective client interaction. Ability to work independently as well as part of a team. Essential Qualities: Hardworking and able to meet deadlines. Able to work in part of a team and independently. Friendly and professional with customers. Able to resolve unforeseen problems. A 'can do' attitude. An eye for detail. Package includes: Competitive salary of circa basic £54600.00 (this is including travel time which is paid door to door) Overtime available on top of the stated salary Additional payment of £100 per week as part of on call rota. (Currently 1 in every 7-8 days) Van and fuel card (personal use permitted) Up to 33 days annual leave (including bank holidays) Laptop and smartphone All tools supplied apart from hand tools Training and development courses Eligible to sign up to company Perkbox scheme () after probation period is complete. If you're ready to take your career to the next level with a company that values integrity and innovation, apply now to join our dedicated team at JCW Energy Services Ltd! Job Types: Full-time, Permanent Pay: £21.00-£22.00 per hour Benefits: Company car Company events Company pension Discounted or free food Employee discount Free or subsidised travel On-site parking Store discount Experience: HVAC: 4 years (required) Work authorisation: United Kingdom (required) Work Location: In person
Oct 09, 2025
Full time
Company Overview JCW Energy Services Ltd has evolved from a small mechanical installation company to a nationwide provider of mechanical and electrical installation and maintenance services. With a commitment to customer satisfaction, we deliver innovative solutions that ensure safe, comfortable, and energy-efficient environments. Summary As an HVAC Technician at JCW Energy Services Ltd, you will play a vital role in maintaining and installing ventilation (AHU), chilled water systems, and air conditioning systems. Your expertise will contribute to our mission of providing safe and efficient environments for our clients across the nation. Responsibilities Install, maintain, and repair HVAC systems in various commercial and residential settings. Conduct routine inspections to ensure HVAC systems operate efficiently. Diagnose issues with HVAC systems and provide effective solutions. Collaborate with team members to complete projects on time and within budget. Provide excellent customer service by communicating effectively with clients regarding their HVAC needs. Stay updated on industry trends and advancements in HVAC technology. Using an electronic system to follow your schedule and fill in technician reports. Will be carrying out many different jobs throughout the day in different locations. Cleanliness and organising of work van provided, and keeping it well stocked. To ensure that all tools and other Company issued equipment are maintained in good serviceable order. To attend courses and other training events in compliance with statutory requirements. Reporting to the office daily. Confident in using an electronic system day-to-day. Requirements Proven experience as an HVAC Technician or similar role. Relevant certifications in HVAC or related fields are preferred. Strong troubleshooting skills with attention to detail. Excellent communication skills for effective client interaction. Ability to work independently as well as part of a team. Essential Qualities: Hardworking and able to meet deadlines. Able to work in part of a team and independently. Friendly and professional with customers. Able to resolve unforeseen problems. A 'can do' attitude. An eye for detail. Package includes: Competitive salary of circa basic £54600.00 (this is including travel time which is paid door to door) Overtime available on top of the stated salary Additional payment of £100 per week as part of on call rota. (Currently 1 in every 7-8 days) Van and fuel card (personal use permitted) Up to 33 days annual leave (including bank holidays) Laptop and smartphone All tools supplied apart from hand tools Training and development courses Eligible to sign up to company Perkbox scheme () after probation period is complete. If you're ready to take your career to the next level with a company that values integrity and innovation, apply now to join our dedicated team at JCW Energy Services Ltd! Job Types: Full-time, Permanent Pay: £21.00-£22.00 per hour Benefits: Company car Company events Company pension Discounted or free food Employee discount Free or subsidised travel On-site parking Store discount Experience: HVAC: 4 years (required) Work authorisation: United Kingdom (required) Work Location: In person
Field Service Technician Salary : £28,730 pa Requirements for Birmingham centres Hours 8.00am-5.00pm Monday-Friday Job purpose: Working from our Birmingham and Leamington Spa depots to enable the Company to achieve the agreed contractual standard of service required by completing initial training in the workshop reconditioning wheelchair equipment to gain essential product knowledge. On completion of initial training this will enable you to work out in the field delivering and collecting equipment whilst undertaking further training for repairing and servicing wheelchairs. The expectation is that once fully trained most jobs will be completed on a first-time fix basis. Key Responsibilities: Servicing and repairing Powered & Manual wheelchairs in the field with the aim of achieving a first time fix whenever possible. Delivering and collecting wheelchairs to and from service user s homes and NHS departments, always ensuring that the Company Infection Control Policy is followed. Ensure all paperwork relating to each job is read carefully and completed with all the necessary information regarding parts used and action taken written onto the job card to enable the administration team to accurately update the data base. Ensure any PPE supplied for use in carrying out your duties is used as instructed. Once fully trained undertake out of hours responsibility when rostered. Observe all regulations covering the driving and use of the Company vehicle on the public highway and be aware of employee responsibility under the Health & Safety at Work Act. Keep the vehicle you use in a tidy state and ensure stocks of all necessary parts are replenished each day. Ensure the vehicle safety check and the van check sheet are done each week. Maintain a professional customer service attitude and always use discretion when dealing with all service users and other agencies, always wear your uniform and identification badge, and ensure the uniform is always kept clean and laundered. Prioritise and organise your workload, referring to Line Manager as and when appropriate. Be responsible for the maintenance and safe keeping of all tools and equipment provided by the Company as outlined in the Company handbook. Agree to undertake all training offered that is necessary to maintain the skills required for this role. Qualifications: Full UK driving licence Successful enhanced DBS check, company paid for. Able to move and handle loads and equipment safely. Experience of face-to-face customer contact preferred. An awareness and understanding of people with disabilities. Flexible approach to working conditions and working environment change. Ability to use own initiative within set boundaries of the role. Ability to use a mobile phone to relay photographs. Good written and verbal communication skills. Ability to relay clear instructions to clients. Basic computer skills for diagnostic purposes. Physical demands of the job: Moving and handling of equipment and accessories following handling guidelines Standing at a bench to work Kneeling/crouching Use of ramps and any other agreed moving equipment. Most challenging/difficult part of the role: Flexible working/responsive to changing priorities as set by Line Manager or Customer Service team. Committing to being available for short notice overtime if required necessitated by emergency response requirements. Responsibility of out of hour s duties. Confidentiality: Carrying out the work involved with this position, the employee will become party to confidential information including service user information. It is of paramount importance that all information is kept on a private and confidential basis and not disclosed to any other person. Health and Safety: The post holder is required to take reasonable care for his/her own health and safety and that of other persons who may be affected by his/her acts or omissions. The post holder is also required to co-operate with supervisory and managerial staff to ensure that all relevant statutory regulations, policies, codes of practise and departmental safety procedures are adhered to, and to attend relevant training programmes. Prevention and Control of infection: The prevention and control of infection is an integral part of the role of all Ross Care personnel. Staff members will contribute to the prevention and control of infection through standard infection control practises and compliance with the Company infection control policy. Service user/other agency/public engagement and involvement: Ross Care is committed to promoting and embedding equality, diversity and inclusiveness and expects that the post holder will actively promote and engage this commitment in all that they do. The post holder should ensure that in all their behaviours, attitudes and working they recognise and take account of the health needs and rights of all sections of the community including ethnicity, disability, gender, age, sexual orientation and religion/belief. The post holder will be expected to engage the service users, other agencies and the public where relevant and adhere to the Company s policies and procedures governing zero tolerance to discrimination, harassment, bullying, stereotyping and prejudicial treatment. Ross Care will be an equal opportunities employer. Its aim will be to ensure that neither applicants nor employees receive less favourable treatment on the grounds of sex, marital status, disability, religion, creed, colour, race, nationality, ethnic origins or social background, or are disadvantaged by conditions or requirements that cannot be shown to be justifiable. INDHS
Oct 08, 2025
Full time
Field Service Technician Salary : £28,730 pa Requirements for Birmingham centres Hours 8.00am-5.00pm Monday-Friday Job purpose: Working from our Birmingham and Leamington Spa depots to enable the Company to achieve the agreed contractual standard of service required by completing initial training in the workshop reconditioning wheelchair equipment to gain essential product knowledge. On completion of initial training this will enable you to work out in the field delivering and collecting equipment whilst undertaking further training for repairing and servicing wheelchairs. The expectation is that once fully trained most jobs will be completed on a first-time fix basis. Key Responsibilities: Servicing and repairing Powered & Manual wheelchairs in the field with the aim of achieving a first time fix whenever possible. Delivering and collecting wheelchairs to and from service user s homes and NHS departments, always ensuring that the Company Infection Control Policy is followed. Ensure all paperwork relating to each job is read carefully and completed with all the necessary information regarding parts used and action taken written onto the job card to enable the administration team to accurately update the data base. Ensure any PPE supplied for use in carrying out your duties is used as instructed. Once fully trained undertake out of hours responsibility when rostered. Observe all regulations covering the driving and use of the Company vehicle on the public highway and be aware of employee responsibility under the Health & Safety at Work Act. Keep the vehicle you use in a tidy state and ensure stocks of all necessary parts are replenished each day. Ensure the vehicle safety check and the van check sheet are done each week. Maintain a professional customer service attitude and always use discretion when dealing with all service users and other agencies, always wear your uniform and identification badge, and ensure the uniform is always kept clean and laundered. Prioritise and organise your workload, referring to Line Manager as and when appropriate. Be responsible for the maintenance and safe keeping of all tools and equipment provided by the Company as outlined in the Company handbook. Agree to undertake all training offered that is necessary to maintain the skills required for this role. Qualifications: Full UK driving licence Successful enhanced DBS check, company paid for. Able to move and handle loads and equipment safely. Experience of face-to-face customer contact preferred. An awareness and understanding of people with disabilities. Flexible approach to working conditions and working environment change. Ability to use own initiative within set boundaries of the role. Ability to use a mobile phone to relay photographs. Good written and verbal communication skills. Ability to relay clear instructions to clients. Basic computer skills for diagnostic purposes. Physical demands of the job: Moving and handling of equipment and accessories following handling guidelines Standing at a bench to work Kneeling/crouching Use of ramps and any other agreed moving equipment. Most challenging/difficult part of the role: Flexible working/responsive to changing priorities as set by Line Manager or Customer Service team. Committing to being available for short notice overtime if required necessitated by emergency response requirements. Responsibility of out of hour s duties. Confidentiality: Carrying out the work involved with this position, the employee will become party to confidential information including service user information. It is of paramount importance that all information is kept on a private and confidential basis and not disclosed to any other person. Health and Safety: The post holder is required to take reasonable care for his/her own health and safety and that of other persons who may be affected by his/her acts or omissions. The post holder is also required to co-operate with supervisory and managerial staff to ensure that all relevant statutory regulations, policies, codes of practise and departmental safety procedures are adhered to, and to attend relevant training programmes. Prevention and Control of infection: The prevention and control of infection is an integral part of the role of all Ross Care personnel. Staff members will contribute to the prevention and control of infection through standard infection control practises and compliance with the Company infection control policy. Service user/other agency/public engagement and involvement: Ross Care is committed to promoting and embedding equality, diversity and inclusiveness and expects that the post holder will actively promote and engage this commitment in all that they do. The post holder should ensure that in all their behaviours, attitudes and working they recognise and take account of the health needs and rights of all sections of the community including ethnicity, disability, gender, age, sexual orientation and religion/belief. The post holder will be expected to engage the service users, other agencies and the public where relevant and adhere to the Company s policies and procedures governing zero tolerance to discrimination, harassment, bullying, stereotyping and prejudicial treatment. Ross Care will be an equal opportunities employer. Its aim will be to ensure that neither applicants nor employees receive less favourable treatment on the grounds of sex, marital status, disability, religion, creed, colour, race, nationality, ethnic origins or social background, or are disadvantaged by conditions or requirements that cannot be shown to be justifiable. INDHS
Refrigeration Engineer - Food Manufacturing We are looking for a Refrigeration Engineer to join one of the UK's leading food manufacturing companies, supplying a wide range of products to both retailers and the foodservice sector. OPPORTUNITY HIGHLIGHTS Competitive Salary: £45,000 - £55,000 THE REFRIGERATION ENGINEER ROLE Repair & Maintenance of A/C, chiller and freezers. Mechanical and Electrical work knowledge for Refrigerant. Responsible for the safe and efficient installation. Able to be repair and fault finding. Ability to demonstrate a good level of understanding of commercial and industrial refrigeration electrics. Attend reactive service calls on a variety of air conditioning units including splits, ASHP and VRF systems. Carry out preventative maintenance on refrigerant unit, ASHP and ventilation units. Installation of air conditioning systems. THE IDEAL CANDIDATEYou'll have strong experience as a Refrigeration Engineer in the food manufacturing sector, along with the following: Fully qualified with F-Gas Certification Experience in Air Conditioning, Freezer/ Refrigerator Technician Having leadership abilities Being practical Having good written and spoken communication skills Having interpersonal abilities Being aware of safety issues Being able to read technical drawings Knowledge of ventilation installation would be an advantage Knowledge of Air Source Heat Pumps would be an advantage If this Refrigeration Engineer role sounds like the right fit for you, apply TODAY to explore this exciting opportunity further! Please Note: Kandhu Recruitment will consider all applications based on each candidate's suitability to the role or similar roles within the Food Sector. Suitable candidates will be added to our secure recruitment database, and we will be in contact to progress your application further. We do not contact unsuitable applicants. Kandhu GDPR & Privacy Policy StatementKandhu has fully implemented GDPR & Privacy Policies across its business. You can find our full Privacy Policy on our website. By applying for this role, Kandhu will add your details to our database, assuming you have the appropriate experience for the roles you apply for.
Oct 08, 2025
Full time
Refrigeration Engineer - Food Manufacturing We are looking for a Refrigeration Engineer to join one of the UK's leading food manufacturing companies, supplying a wide range of products to both retailers and the foodservice sector. OPPORTUNITY HIGHLIGHTS Competitive Salary: £45,000 - £55,000 THE REFRIGERATION ENGINEER ROLE Repair & Maintenance of A/C, chiller and freezers. Mechanical and Electrical work knowledge for Refrigerant. Responsible for the safe and efficient installation. Able to be repair and fault finding. Ability to demonstrate a good level of understanding of commercial and industrial refrigeration electrics. Attend reactive service calls on a variety of air conditioning units including splits, ASHP and VRF systems. Carry out preventative maintenance on refrigerant unit, ASHP and ventilation units. Installation of air conditioning systems. THE IDEAL CANDIDATEYou'll have strong experience as a Refrigeration Engineer in the food manufacturing sector, along with the following: Fully qualified with F-Gas Certification Experience in Air Conditioning, Freezer/ Refrigerator Technician Having leadership abilities Being practical Having good written and spoken communication skills Having interpersonal abilities Being aware of safety issues Being able to read technical drawings Knowledge of ventilation installation would be an advantage Knowledge of Air Source Heat Pumps would be an advantage If this Refrigeration Engineer role sounds like the right fit for you, apply TODAY to explore this exciting opportunity further! Please Note: Kandhu Recruitment will consider all applications based on each candidate's suitability to the role or similar roles within the Food Sector. Suitable candidates will be added to our secure recruitment database, and we will be in contact to progress your application further. We do not contact unsuitable applicants. Kandhu GDPR & Privacy Policy StatementKandhu has fully implemented GDPR & Privacy Policies across its business. You can find our full Privacy Policy on our website. By applying for this role, Kandhu will add your details to our database, assuming you have the appropriate experience for the roles you apply for.
We have a great opportunity for a Maintenance Technician Refrigeration. This will be to join our team based in Fleet Health Campus. The starting salary for this role is from £39,000 (depending on experience) This is a permanent, full time position working 37.5 hours per week. Monday-Friday 8am-4pm. This is a mobile role covering Kent. Requirements for the role: Qualifications At least one of the below: C&G Refrigeration and Air Conditioning (6187) Qualified to Level 2 NVQ in Air Conditioning and Refrigeration. C&G FGAS and ODS Regulations (2079) (Safe handling of Refrigerants Certificate) Formal apprenticeship or craft trained equivalent. Additional Requirements: Driving licence is essential Must be comfortable using technological devices to log jobs. On-Call availability Desirable to have industry experience Ability to work alone and/or as part of a wider team as this role will require you to work cohesively with other Technical Disciplines. Please note, DBS Checks & DVLA checks will be required for this role. Key Responsibilities: Ensure compliance in accordance with all NHSPS Health, Safety & Wellbeing Policies, relevant NHSPS Technical Guidance, Process and Procedures, Statutory Regulations, Approved Codes of Practice and any applicable aspects of HTMs. Ensue that new or revised practice and policies are implemented within own work areas Deliver Scheduled, Reactive and Remedial maintenance services as directed by the PPM planner (CAFM), helpdesk or Technical Services Supervisor, ensuring that operational standards are maintained at all times. Duties may include (but not limited to) testing and inspection of Commercial/Industrial Air Conditioning and Refrigeration services, fault finding, minor repairs or installations and maintaining services and equipment within critical environments, Commercial sites - including Hospitals, Clinics and Offices You may be required to undertake tasks in disciplines other than your own. Ability to assess problems to determine the best course of action, this would include complex technical issues and be able to communicate technical and or complex information to various stakeholders Benefits: On-Call allowance (rota dependant) Company van and tools provided. 27 days holiday (plus bank holidays on top) Access to grouppersonal pension plan including SMART contributions into which the company will contribute up to 6% towards your savings, Training and development opportunities NHS Bluelight discounts. Who are we? We are part of the NHS family with 6,000 professionals supporting over 3,000 healthcare properties across England. Our purpose is to enable excellent patient care by being the best property and facilities provider to the NHS. Our services include estate strategy and optimisation, property management, facilities management, property development and construction project management. We help support millions of patients and NHS colleagues in collaboration without 7,000 customers who range from Integrated Care Systems, health providers, charities and more. Our culture and values seek to place our NHS colleagues and their patients, at the heart of everything we do. We celebrate diversity, and we are working hard to create an inclusive environment where people love to work and can fulfil their potential. We would encourage all applicants to apply as soon as possible as we may close vacancies early should we receive a high number of applications. Best of luck with your application!
Oct 08, 2025
Full time
We have a great opportunity for a Maintenance Technician Refrigeration. This will be to join our team based in Fleet Health Campus. The starting salary for this role is from £39,000 (depending on experience) This is a permanent, full time position working 37.5 hours per week. Monday-Friday 8am-4pm. This is a mobile role covering Kent. Requirements for the role: Qualifications At least one of the below: C&G Refrigeration and Air Conditioning (6187) Qualified to Level 2 NVQ in Air Conditioning and Refrigeration. C&G FGAS and ODS Regulations (2079) (Safe handling of Refrigerants Certificate) Formal apprenticeship or craft trained equivalent. Additional Requirements: Driving licence is essential Must be comfortable using technological devices to log jobs. On-Call availability Desirable to have industry experience Ability to work alone and/or as part of a wider team as this role will require you to work cohesively with other Technical Disciplines. Please note, DBS Checks & DVLA checks will be required for this role. Key Responsibilities: Ensure compliance in accordance with all NHSPS Health, Safety & Wellbeing Policies, relevant NHSPS Technical Guidance, Process and Procedures, Statutory Regulations, Approved Codes of Practice and any applicable aspects of HTMs. Ensue that new or revised practice and policies are implemented within own work areas Deliver Scheduled, Reactive and Remedial maintenance services as directed by the PPM planner (CAFM), helpdesk or Technical Services Supervisor, ensuring that operational standards are maintained at all times. Duties may include (but not limited to) testing and inspection of Commercial/Industrial Air Conditioning and Refrigeration services, fault finding, minor repairs or installations and maintaining services and equipment within critical environments, Commercial sites - including Hospitals, Clinics and Offices You may be required to undertake tasks in disciplines other than your own. Ability to assess problems to determine the best course of action, this would include complex technical issues and be able to communicate technical and or complex information to various stakeholders Benefits: On-Call allowance (rota dependant) Company van and tools provided. 27 days holiday (plus bank holidays on top) Access to grouppersonal pension plan including SMART contributions into which the company will contribute up to 6% towards your savings, Training and development opportunities NHS Bluelight discounts. Who are we? We are part of the NHS family with 6,000 professionals supporting over 3,000 healthcare properties across England. Our purpose is to enable excellent patient care by being the best property and facilities provider to the NHS. Our services include estate strategy and optimisation, property management, facilities management, property development and construction project management. We help support millions of patients and NHS colleagues in collaboration without 7,000 customers who range from Integrated Care Systems, health providers, charities and more. Our culture and values seek to place our NHS colleagues and their patients, at the heart of everything we do. We celebrate diversity, and we are working hard to create an inclusive environment where people love to work and can fulfil their potential. We would encourage all applicants to apply as soon as possible as we may close vacancies early should we receive a high number of applications. Best of luck with your application!
