Location: Cambridge (CB25) Duration: Permanent Hours: 37.5 per week 8am - 4pm (Monday to Friday) Salary: Competitive Job Reference: 36074 An exciting opportunity has arisen for a Software Engineer to support the development and optimisation of software systems within a high-tech manufacturing environment. Our Cambridge based client is looking to expand their busy team. This role focuses on production test automation, new product introduction (NPI) and continuous improvement of engineering processes. Key Responsibilities - Support the transfer of new products from development into manufacturing - Develop and maintain automated test solutions for production, including verification and calibration - Collaborate with engineering teams to improve product testability and manufacturing efficiency - Implement and manage processes for software deployment, firmware programming and configuration control - Drive automation and process improvements to increase throughput and reduce manual intervention - Provide production support, including fault diagnosis, root cause analysis and corrective actions - Maintain clear technical documentation and support change control processes - Work cross-functionally with engineering, production and quality teams Skills and Experience - Degree or equivalent experience in Software Engineering, Computer Science, or similar - Experience developing software for test automation or manufacturing environments - Strong knowledge of configuration control and software release processes - Experience with tools such as LabVIEW (preferred) and ideally Python or C/C++ - Ability to troubleshoot software and embedded systems in a hardware-integrated environment - Strong attention to detail and documentation skills Desirable - Experience supporting NPI through to production - Familiarity with embedded systems and manufacturing test equipment - Understanding of quality standards and controlled engineering environments Please contact us as soon as possible for more details or apply below!
May 14, 2026
Full time
Location: Cambridge (CB25) Duration: Permanent Hours: 37.5 per week 8am - 4pm (Monday to Friday) Salary: Competitive Job Reference: 36074 An exciting opportunity has arisen for a Software Engineer to support the development and optimisation of software systems within a high-tech manufacturing environment. Our Cambridge based client is looking to expand their busy team. This role focuses on production test automation, new product introduction (NPI) and continuous improvement of engineering processes. Key Responsibilities - Support the transfer of new products from development into manufacturing - Develop and maintain automated test solutions for production, including verification and calibration - Collaborate with engineering teams to improve product testability and manufacturing efficiency - Implement and manage processes for software deployment, firmware programming and configuration control - Drive automation and process improvements to increase throughput and reduce manual intervention - Provide production support, including fault diagnosis, root cause analysis and corrective actions - Maintain clear technical documentation and support change control processes - Work cross-functionally with engineering, production and quality teams Skills and Experience - Degree or equivalent experience in Software Engineering, Computer Science, or similar - Experience developing software for test automation or manufacturing environments - Strong knowledge of configuration control and software release processes - Experience with tools such as LabVIEW (preferred) and ideally Python or C/C++ - Ability to troubleshoot software and embedded systems in a hardware-integrated environment - Strong attention to detail and documentation skills Desirable - Experience supporting NPI through to production - Familiarity with embedded systems and manufacturing test equipment - Understanding of quality standards and controlled engineering environments Please contact us as soon as possible for more details or apply below!
This position is not suitable for a person who has allergies to materials such as glue, resins, oils, grease and hydraulic fluids. The role involves working with magnets or being in and around magnetic fields and heavy lifting. Responsibilities Skills Manual dexterity, soldering, crimp and use of general hand assembly tools. Read, interpret and work from engineering drawings, method sheets or samples. Use of process materials including resins, glues and curing systems and/or agents. Use of computerised assembly, test and stock control systems & peripheral equipment. Assembly of optical units, wiring looms, cables, electro mechanical assemblies and finished products adhering to Company documentation and to agreed QA standards. Ensure that the integrity and quality of the materials used in the process meet the required standards. Testing & Packing Test or calibration of assemblies using a range of Company bespoke processes; PC based, mechanical and manually operated equipment. Ensure the integrity & quality of the product passed to the next stage of the process. Packing operations ranging from bagging and labelling individual items to site kits containing multiple products and accessories into bespoke carry cases. General Working in all areas of production using a range of different processes. Handling process materials safely to prevent degradation. Health & Safety Comply with Company H&S procedures and legislation at all times. Identify any hazards, make safe and report as per Company H&S procedures. Ensure correct use and storage of PPE and RPE. Any additional duties deemed appropriate which are within the job holders capabilities. About You Assembly, test, packing and material handling processes. Optical assembly or detailed fine assembly work. Computer based processes. Mechanical and electronic processes. Use of documentation (bill of materials, assembly drawings). Health & Safety Working within a disciplined ISO9001 environment. Skills Good organisational skills. Ability to work on own initiative and to strict timescales. IT literate, good working knowledge of MS Excel, Word and Outlook. Company Competencies Communicating and Influencing Level 1. Drive and Determination Level 1. Problem Solving/Initiative Level 2. Technical/Functional Excellence Level 2. Planning and Business Performance Level 1. Skills Good organisational skills. Ability to work on own initiative and to strict timescales. IT literate, good working knowledge of MS Excel, Word and Outlook.
May 14, 2026
Full time
This position is not suitable for a person who has allergies to materials such as glue, resins, oils, grease and hydraulic fluids. The role involves working with magnets or being in and around magnetic fields and heavy lifting. Responsibilities Skills Manual dexterity, soldering, crimp and use of general hand assembly tools. Read, interpret and work from engineering drawings, method sheets or samples. Use of process materials including resins, glues and curing systems and/or agents. Use of computerised assembly, test and stock control systems & peripheral equipment. Assembly of optical units, wiring looms, cables, electro mechanical assemblies and finished products adhering to Company documentation and to agreed QA standards. Ensure that the integrity and quality of the materials used in the process meet the required standards. Testing & Packing Test or calibration of assemblies using a range of Company bespoke processes; PC based, mechanical and manually operated equipment. Ensure the integrity & quality of the product passed to the next stage of the process. Packing operations ranging from bagging and labelling individual items to site kits containing multiple products and accessories into bespoke carry cases. General Working in all areas of production using a range of different processes. Handling process materials safely to prevent degradation. Health & Safety Comply with Company H&S procedures and legislation at all times. Identify any hazards, make safe and report as per Company H&S procedures. Ensure correct use and storage of PPE and RPE. Any additional duties deemed appropriate which are within the job holders capabilities. About You Assembly, test, packing and material handling processes. Optical assembly or detailed fine assembly work. Computer based processes. Mechanical and electronic processes. Use of documentation (bill of materials, assembly drawings). Health & Safety Working within a disciplined ISO9001 environment. Skills Good organisational skills. Ability to work on own initiative and to strict timescales. IT literate, good working knowledge of MS Excel, Word and Outlook. Company Competencies Communicating and Influencing Level 1. Drive and Determination Level 1. Problem Solving/Initiative Level 2. Technical/Functional Excellence Level 2. Planning and Business Performance Level 1. Skills Good organisational skills. Ability to work on own initiative and to strict timescales. IT literate, good working knowledge of MS Excel, Word and Outlook.
Electrical Calibration Operator 12-Month Contract Based in Bolton Offering 28.35ph Inside IR35 Apprenticeship required - Electrical/Electronic Do you hold an Electrical/Electronic Apprenticeship? Do you have experience conducting calibrations on instruments? Do you want to work with an industry-leading company? If the answer is yes to these, then this role could be for you. You will be working as the Electrical Calibration Operator with a market-leading Defence and Aerospace company who are constantly growing and developing. They are always looking to bring on new talents such as yourself and further develop your skills to enable you to grow within the company and industry. You will be a key member of the Manufacturing function within the business where you will be tasked to carry out routine calibration of Special To Type Test Equipment (STTE) and Commercial Off The Shelf (COTS) equipment. This role will not be working with products so it is not essential you have experience with products, rather Test and process equipment experience is ideal. For this role, you will be required to hold an approved apprenticeship relating to Electrical/Electronic Engineering to NVQ Level 3/TR23/TR21. Your responsibilities will involve: Working in a multi-disciplined team to support the Operations team. Initial calibration, routine calibration, and maintenance of test and measurement equipment. Ensure that both factory and proprietary test and measuring equipment are maintained in line with current procedures. Carry out calibration and repair tasks in accordance with departmental processes and procedures. Generating clear and comprehensive calibration/maintenance records for traceability purposes. The skillset/experience you may have includes: Generate clear and comprehensive calibration & maintenance records. Experience in calibrating COTS/Special to Type Test Equipment Experience in calibrating electrical equipment such as Power Supplies, Multimeters, Oscilloscopes, Function Generators, etc. Experience in In-service Inspection and Testing of Electrical Equipment Be competent in following the manufacturer's instructions. A good understanding of SAP would be desirable. Time served apprenticeship/modern apprenticeship or NVQ Level 3 City & Guilds part 2 & 3/ONC/HNC in Electronics Experience working on Environmental Stress Screening Facilities (ESS) If this sounds like an opportunity you want to be involved in and could see yourself growing in, then simply apply and we can discuss further! Electrical Calibration Operator 12-Month Contract Based in Bolton Offering 28.35ph Inside IR35 Apprenticeship required - Electrical/Electronic Disclaimer: This vacancy is being advertised by either Advanced Resource Managers Limited, Advanced Resource Managers IT Limited or Advanced Resource Managers Engineering Limited ("ARM"). ARM is a specialist talent acquisition and management consultancy. We provide technical contingency recruitment and a portfolio of more complex resource solutions. Our specialist recruitment divisions cover the entire technical arena, including some of the most economically and strategically important industries in the UK and the world today. We will never send your CV without your permission. Where the role is marked as Outside IR35 in the advertisement this is subject to receipt of a final Status Determination Statement from the end Client and may be subject to change.
May 13, 2026
Contractor
Electrical Calibration Operator 12-Month Contract Based in Bolton Offering 28.35ph Inside IR35 Apprenticeship required - Electrical/Electronic Do you hold an Electrical/Electronic Apprenticeship? Do you have experience conducting calibrations on instruments? Do you want to work with an industry-leading company? If the answer is yes to these, then this role could be for you. You will be working as the Electrical Calibration Operator with a market-leading Defence and Aerospace company who are constantly growing and developing. They are always looking to bring on new talents such as yourself and further develop your skills to enable you to grow within the company and industry. You will be a key member of the Manufacturing function within the business where you will be tasked to carry out routine calibration of Special To Type Test Equipment (STTE) and Commercial Off The Shelf (COTS) equipment. This role will not be working with products so it is not essential you have experience with products, rather Test and process equipment experience is ideal. For this role, you will be required to hold an approved apprenticeship relating to Electrical/Electronic Engineering to NVQ Level 3/TR23/TR21. Your responsibilities will involve: Working in a multi-disciplined team to support the Operations team. Initial calibration, routine calibration, and maintenance of test and measurement equipment. Ensure that both factory and proprietary test and measuring equipment are maintained in line with current procedures. Carry out calibration and repair tasks in accordance with departmental processes and procedures. Generating clear and comprehensive calibration/maintenance records for traceability purposes. The skillset/experience you may have includes: Generate clear and comprehensive calibration & maintenance records. Experience in calibrating COTS/Special to Type Test Equipment Experience in calibrating electrical equipment such as Power Supplies, Multimeters, Oscilloscopes, Function Generators, etc. Experience in In-service Inspection and Testing of Electrical Equipment Be competent in following the manufacturer's instructions. A good understanding of SAP would be desirable. Time served apprenticeship/modern apprenticeship or NVQ Level 3 City & Guilds part 2 & 3/ONC/HNC in Electronics Experience working on Environmental Stress Screening Facilities (ESS) If this sounds like an opportunity you want to be involved in and could see yourself growing in, then simply apply and we can discuss further! Electrical Calibration Operator 12-Month Contract Based in Bolton Offering 28.35ph Inside IR35 Apprenticeship required - Electrical/Electronic Disclaimer: This vacancy is being advertised by either Advanced Resource Managers Limited, Advanced Resource Managers IT Limited or Advanced Resource Managers Engineering Limited ("ARM"). ARM is a specialist talent acquisition and management consultancy. We provide technical contingency recruitment and a portfolio of more complex resource solutions. Our specialist recruitment divisions cover the entire technical arena, including some of the most economically and strategically important industries in the UK and the world today. We will never send your CV without your permission. Where the role is marked as Outside IR35 in the advertisement this is subject to receipt of a final Status Determination Statement from the end Client and may be subject to change.
Job Title: Quality Inspector Location: Stonehouse Hours: 7.30am - 4.30pm Mon to Thurs, 7.30am - 12.30pm Friday Salary: 30,000 Key Responsibilities of a Quality Inspector: Perform first-off inspections and complete first article reports in line with customer and internal requirements Carry out in-process and final inspections against engineering drawings and specifications Conduct incoming goods inspection Use a range of inspection equipment and guages Maintain accurate inspection records and quality documentation Identify and report non-conforming products in line with procedures Support root cause analysis and corrective action activities Ensure all equipment is within calibration prior to use Maintain a clean, organised inspection area Support internal audits, 5S activities and continuous improvement initiatives Key Skills of a Quality Inspector: Previous experience in a manufacturing or precision engineering environment Experience using inspection devices and guages High level of attention to detail and accuracy Able to work independently and as part of a team Willingness to learn and develop skills in an inspection department Good communication skills, both written and verbal IT literate with experience completing electronic inspection reports
May 13, 2026
Full time
Job Title: Quality Inspector Location: Stonehouse Hours: 7.30am - 4.30pm Mon to Thurs, 7.30am - 12.30pm Friday Salary: 30,000 Key Responsibilities of a Quality Inspector: Perform first-off inspections and complete first article reports in line with customer and internal requirements Carry out in-process and final inspections against engineering drawings and specifications Conduct incoming goods inspection Use a range of inspection equipment and guages Maintain accurate inspection records and quality documentation Identify and report non-conforming products in line with procedures Support root cause analysis and corrective action activities Ensure all equipment is within calibration prior to use Maintain a clean, organised inspection area Support internal audits, 5S activities and continuous improvement initiatives Key Skills of a Quality Inspector: Previous experience in a manufacturing or precision engineering environment Experience using inspection devices and guages High level of attention to detail and accuracy Able to work independently and as part of a team Willingness to learn and develop skills in an inspection department Good communication skills, both written and verbal IT literate with experience completing electronic inspection reports
The company are an established and leading manufacturer of precision components and assemblies to the aerospace industry. Pertemps are working on their behalf to recruit a Laboratory Manager for their operations in Redditch. Salary - 42,000 to 52,000 per annum. The role is days (Monday to Friday). Main Responsibilities Responsible for the scheduling and testing or work in progress. Training, certification and management of lab technicians. Maintaining calibration of the test equipment and ensuring NADCAP MTL requirements are adhered to. Liaise with quality, logistics, manufacturing and engineering teams. Skills and experience required Previous lab experience. Experience in managing a team. Experience in mechanical testing. Able to work to very tight tolerances. Knowledge of NADCAP Qualification in Metallurgy, Metallurgical Engineering or Material Science (Advantageous not essential) Able to interpret industry standards for test requirements. The company offers a modern, friendly working environment, onsite parking, social company events and progression opportunities. The company are based in the Redditch area so is commutable from Birmingham, Bromsgrove, Solihull, Studley, Alcester, Droitwich. The role is being advertised on behalf of Pertemps who operate as a recruitment agency.
May 13, 2026
Full time
The company are an established and leading manufacturer of precision components and assemblies to the aerospace industry. Pertemps are working on their behalf to recruit a Laboratory Manager for their operations in Redditch. Salary - 42,000 to 52,000 per annum. The role is days (Monday to Friday). Main Responsibilities Responsible for the scheduling and testing or work in progress. Training, certification and management of lab technicians. Maintaining calibration of the test equipment and ensuring NADCAP MTL requirements are adhered to. Liaise with quality, logistics, manufacturing and engineering teams. Skills and experience required Previous lab experience. Experience in managing a team. Experience in mechanical testing. Able to work to very tight tolerances. Knowledge of NADCAP Qualification in Metallurgy, Metallurgical Engineering or Material Science (Advantageous not essential) Able to interpret industry standards for test requirements. The company offers a modern, friendly working environment, onsite parking, social company events and progression opportunities. The company are based in the Redditch area so is commutable from Birmingham, Bromsgrove, Solihull, Studley, Alcester, Droitwich. The role is being advertised on behalf of Pertemps who operate as a recruitment agency.
Maintenance Technician Swansea £37,000 to £39,000 What You'll Do: You'll join a skilled maintenance team within a manufacturing environment, supporting the ongoing performance, safety and reliability of production equipment. The role is hands-on and varied, covering planned and reactive maintenance on various machinery, as well as supporting new equipment installation and commissioning. You'll be involved in fault finding, root cause analysis and continuous improvement activity, helping to maximise uptime and productivity. You'll also contribute to PPM schedules, manage critical spares, carry out calibrations and support engineering projects aimed at improving equipment performance and reliability. What You'll Bring: Time-served background in electrical or mechanical engineering Proven experience maintaining production line or bespoke manufacturing equipment Strong electrical fault-finding skills, including relay logic and drive systems Experience working with pneumatic systems and automation equipment Ability to interpret electrical and pneumatic drawings A methodical and analytical approach to fault diagnosis Strong awareness of health and safety procedures, including lockout tagout Clear communication skills and the ability to work effectively with engineering and production teams A proactive mindset with a focus on continuous improvement Desirable but not essential: HNC in Electrical or Mechanical Engineering General awareness of PLC-controlled equipment Why You Should Apply: This is a days-based role offering stability and consistency within a manufacturing environment. You'll work with a wide range of technically interesting equipment while being supported by an experienced engineering team. It's an ideal opportunity for a practical maintenance engineer looking for long-term security and technical challenge without shift work. Ready to Apply? Contact Jacob Purcell to find out more. Please apply with a CV and a cover letter outlining why you're perfect for the role. Know someone great for the job? We offer a referral scheme-just get in touch! Note: We do our best to respond to every application, but due to volume, we can't always guarantee it. If you haven't heard back within 7 days, unfortunately, you haven't been successful this time. Keep an eye on our site for new opportunities!
May 13, 2026
Full time
Maintenance Technician Swansea £37,000 to £39,000 What You'll Do: You'll join a skilled maintenance team within a manufacturing environment, supporting the ongoing performance, safety and reliability of production equipment. The role is hands-on and varied, covering planned and reactive maintenance on various machinery, as well as supporting new equipment installation and commissioning. You'll be involved in fault finding, root cause analysis and continuous improvement activity, helping to maximise uptime and productivity. You'll also contribute to PPM schedules, manage critical spares, carry out calibrations and support engineering projects aimed at improving equipment performance and reliability. What You'll Bring: Time-served background in electrical or mechanical engineering Proven experience maintaining production line or bespoke manufacturing equipment Strong electrical fault-finding skills, including relay logic and drive systems Experience working with pneumatic systems and automation equipment Ability to interpret electrical and pneumatic drawings A methodical and analytical approach to fault diagnosis Strong awareness of health and safety procedures, including lockout tagout Clear communication skills and the ability to work effectively with engineering and production teams A proactive mindset with a focus on continuous improvement Desirable but not essential: HNC in Electrical or Mechanical Engineering General awareness of PLC-controlled equipment Why You Should Apply: This is a days-based role offering stability and consistency within a manufacturing environment. You'll work with a wide range of technically interesting equipment while being supported by an experienced engineering team. It's an ideal opportunity for a practical maintenance engineer looking for long-term security and technical challenge without shift work. Ready to Apply? Contact Jacob Purcell to find out more. Please apply with a CV and a cover letter outlining why you're perfect for the role. Know someone great for the job? We offer a referral scheme-just get in touch! Note: We do our best to respond to every application, but due to volume, we can't always guarantee it. If you haven't heard back within 7 days, unfortunately, you haven't been successful this time. Keep an eye on our site for new opportunities!
Business Development Manager Company Overview: For over 75 years, WIKA has been a renowned partner and competent specialist for any task in the field of measurement technology. With steadily growing efficiency, innovative technologies are applied when developing new products and system solutions. The reliability of the products and the readiness to face all challenges of the market have been the key factors for WIKA achieving a leading position in the global market. Within the WIKA Group, currently 11,200 employees are dedicated to maintain and improve technology in pressure, temperature, force and level measurement, and also in the fields of flow measurement, calibration and SF 6 gas solutions. WIKA Optical Sensing Ltd, previously known as Oxsensis, was acquired by WIKA in 2023 and brings expertise in optical sensing technology, particularly for pressure and temperature measurement. Your Activities: Own annual sales targets for existing products and new product introductions (excluding R&D NRE income). Manage major sales accounts. Develop and implement growth strategies, tactics, and action plans. Collaborate with WIKA colleagues on product and segment management activities. Engage with customer procurement teams to secure scheduled orders. Communicate value propositions and provide feedback on product gaps for future portfolio development. Evaluate and manage customer enquiries, liaising with Engineering to select appropriate solutions. Lead internal reviews and manage input to business processes. Own technical management of customer trials, including specification negotiation, test data review, and troubleshooting. Prepare manuals, user instructions, and marketing literature. Conduct product demonstrations and installation support. Work with Engineering and Operations to ensure effective scheduling, manufacturing, testing, and logistics. Maintain commercial documentation and ERP entries for material traceability. Operate within WIKA s Quality Management System and Employee Handbook. Your Profile: Essential: Proven experience in Business Development and Sales, with ability to manage full BD process. Engineering degree; STEM background preferred. Excellent communication skills across disciplines and organizational levels. Minimum 10 years experience in Power generation, Industrial systems, or Aerospace. Ability to combine strategic vision with hands-on technical capability. Desirable: Knowledge of optical principles and instrumentation. Experience in turbomachinery, industrial, power generation, or aerospace sectors. Familiarity with regulated industry Quality Management Systems. Membership of a Professional Engineering Institution. Business Development Manager
May 13, 2026
Full time
Business Development Manager Company Overview: For over 75 years, WIKA has been a renowned partner and competent specialist for any task in the field of measurement technology. With steadily growing efficiency, innovative technologies are applied when developing new products and system solutions. The reliability of the products and the readiness to face all challenges of the market have been the key factors for WIKA achieving a leading position in the global market. Within the WIKA Group, currently 11,200 employees are dedicated to maintain and improve technology in pressure, temperature, force and level measurement, and also in the fields of flow measurement, calibration and SF 6 gas solutions. WIKA Optical Sensing Ltd, previously known as Oxsensis, was acquired by WIKA in 2023 and brings expertise in optical sensing technology, particularly for pressure and temperature measurement. Your Activities: Own annual sales targets for existing products and new product introductions (excluding R&D NRE income). Manage major sales accounts. Develop and implement growth strategies, tactics, and action plans. Collaborate with WIKA colleagues on product and segment management activities. Engage with customer procurement teams to secure scheduled orders. Communicate value propositions and provide feedback on product gaps for future portfolio development. Evaluate and manage customer enquiries, liaising with Engineering to select appropriate solutions. Lead internal reviews and manage input to business processes. Own technical management of customer trials, including specification negotiation, test data review, and troubleshooting. Prepare manuals, user instructions, and marketing literature. Conduct product demonstrations and installation support. Work with Engineering and Operations to ensure effective scheduling, manufacturing, testing, and logistics. Maintain commercial documentation and ERP entries for material traceability. Operate within WIKA s Quality Management System and Employee Handbook. Your Profile: Essential: Proven experience in Business Development and Sales, with ability to manage full BD process. Engineering degree; STEM background preferred. Excellent communication skills across disciplines and organizational levels. Minimum 10 years experience in Power generation, Industrial systems, or Aerospace. Ability to combine strategic vision with hands-on technical capability. Desirable: Knowledge of optical principles and instrumentation. Experience in turbomachinery, industrial, power generation, or aerospace sectors. Familiarity with regulated industry Quality Management Systems. Membership of a Professional Engineering Institution. Business Development Manager
Maintenance Engineer - CNC / PLC (Automation / Manufacturing) Bristol Onsite Permanent Competitive Salary Are you an experienced PLC Engineer looking to work on cutting-edge automated manufacturing equipment? We're hiring a Field Service Engineer / Maintenance Engineer to support highly advanced CNC and automation systems at a major aerospace facility in Bristol. This is a long-term, stable role where you'll play a key part in keeping complex, high-value machinery running at peak performance. What You'll Be Doing Diagnose and repair faults on special purpose CNC machines and PLC-controlled equipment (Siemens, FANUC) Carry out corrective maintenance, fault finding, and root cause analysis Perform machine calibration, alignment, and optimisation Support and oversee preventive maintenance activities Work closely with remote engineering teams to resolve technical issues Maintain clear service reports and technical documentation Act as the onsite technical expert in a customer-facing environment What You'll Be Working On Advanced multi-axis CNC machinery Siemens Sinumerik & TIA Portal PLC systems FANUC robotics and automation systems High-precision equipment used in aerospace manufacturing What We're Looking For Experience as a Field Service Engineer, Maintenance Engineer, CNC Engineer, or Automation Engineer Strong fault-finding skills on CNC machines and/or PLC systems Experience with Siemens PLC (TIA Portal) or similar platforms Ability to read electrical and mechanical schematics Hands-on mechanical and electrical maintenance experience Comfortable working independently in an onsite, customer-facing role Nice to Have (Not Essential) Experience with FANUC robots Knowledge of advanced manufacturing Exposure to automated fibre placement or tape laying systems What's in It for You Long-term, stable position with a leading technology environment Opportunity to work on high-end, specialist manufacturing equipment Structured onboarding and training (including international exposure) Clear path to becoming a site technical specialist Working Hours Monday to Friday, approx. 08:00-17:00 Fully onsite role in Bristol Your CV will be forwarded to Jonathan Lee Recruitment, a leading engineering and manufacturing recruitment consultancy established in 1978. The services advertised by Jonathan Lee Recruitment are those of an Employment Agency.In order for your CV to be processed effectively, please ensure your name, email address, phone number and location (post code OR town OR county, as a minimum) are included.
May 13, 2026
Full time
Maintenance Engineer - CNC / PLC (Automation / Manufacturing) Bristol Onsite Permanent Competitive Salary Are you an experienced PLC Engineer looking to work on cutting-edge automated manufacturing equipment? We're hiring a Field Service Engineer / Maintenance Engineer to support highly advanced CNC and automation systems at a major aerospace facility in Bristol. This is a long-term, stable role where you'll play a key part in keeping complex, high-value machinery running at peak performance. What You'll Be Doing Diagnose and repair faults on special purpose CNC machines and PLC-controlled equipment (Siemens, FANUC) Carry out corrective maintenance, fault finding, and root cause analysis Perform machine calibration, alignment, and optimisation Support and oversee preventive maintenance activities Work closely with remote engineering teams to resolve technical issues Maintain clear service reports and technical documentation Act as the onsite technical expert in a customer-facing environment What You'll Be Working On Advanced multi-axis CNC machinery Siemens Sinumerik & TIA Portal PLC systems FANUC robotics and automation systems High-precision equipment used in aerospace manufacturing What We're Looking For Experience as a Field Service Engineer, Maintenance Engineer, CNC Engineer, or Automation Engineer Strong fault-finding skills on CNC machines and/or PLC systems Experience with Siemens PLC (TIA Portal) or similar platforms Ability to read electrical and mechanical schematics Hands-on mechanical and electrical maintenance experience Comfortable working independently in an onsite, customer-facing role Nice to Have (Not Essential) Experience with FANUC robots Knowledge of advanced manufacturing Exposure to automated fibre placement or tape laying systems What's in It for You Long-term, stable position with a leading technology environment Opportunity to work on high-end, specialist manufacturing equipment Structured onboarding and training (including international exposure) Clear path to becoming a site technical specialist Working Hours Monday to Friday, approx. 08:00-17:00 Fully onsite role in Bristol Your CV will be forwarded to Jonathan Lee Recruitment, a leading engineering and manufacturing recruitment consultancy established in 1978. The services advertised by Jonathan Lee Recruitment are those of an Employment Agency.In order for your CV to be processed effectively, please ensure your name, email address, phone number and location (post code OR town OR county, as a minimum) are included.
Software Engineer Cambridge £55,000 Are you a Software Engineer who thrives on precision, structure, and seeing your work perform in real-world production environments? This is an opportunity for a Software Engineer to play a pivotal role in taking advanced technology from development into scalable manufacture. As a Software Engineer , you will benefit from: 23 days holiday + bank holidays Pension and life insurance Social events Growing company with opportunity to progress As a Software Engineer , your responsibilities will include: Developing and supporting software-driven automation and test solutions for new products Implementing design-for-test principles throughout the product development lifecycle Defining and maintaining processes for firmware programming, configuration, and calibration data handling Creating automated test processes to support scalable, repeatable manufacturing Providing hands-on support during NPI builds, troubleshooting software and system-level issues Driving continuous improvement in production test speed and manufacturing readiness As a Software Engineer , your experience will include: A Degree in Software Engineering or a related discipline Strong experience developing production test or process automation software Proven expertise in C# development using WPF and MVVM methodologies Experience working with software release processes and configuration control The ability to troubleshoot software interacting with embedded or hardware-integrated systems A methodical, detail-focused approach to documentation and controlled change environments If you're ready to take the next step in your career and see your software deliver measurable impact in production, we d love to hear from you. Apply today with an up-to-date CV or call Josh at Rubicon for more information.
May 13, 2026
Full time
Software Engineer Cambridge £55,000 Are you a Software Engineer who thrives on precision, structure, and seeing your work perform in real-world production environments? This is an opportunity for a Software Engineer to play a pivotal role in taking advanced technology from development into scalable manufacture. As a Software Engineer , you will benefit from: 23 days holiday + bank holidays Pension and life insurance Social events Growing company with opportunity to progress As a Software Engineer , your responsibilities will include: Developing and supporting software-driven automation and test solutions for new products Implementing design-for-test principles throughout the product development lifecycle Defining and maintaining processes for firmware programming, configuration, and calibration data handling Creating automated test processes to support scalable, repeatable manufacturing Providing hands-on support during NPI builds, troubleshooting software and system-level issues Driving continuous improvement in production test speed and manufacturing readiness As a Software Engineer , your experience will include: A Degree in Software Engineering or a related discipline Strong experience developing production test or process automation software Proven expertise in C# development using WPF and MVVM methodologies Experience working with software release processes and configuration control The ability to troubleshoot software interacting with embedded or hardware-integrated systems A methodical, detail-focused approach to documentation and controlled change environments If you're ready to take the next step in your career and see your software deliver measurable impact in production, we d love to hear from you. Apply today with an up-to-date CV or call Josh at Rubicon for more information.
Job title: Mechanical Technician (Shift-Based Role) Location: Royston, UK (on-site) 2 positions open for day's shift - Salary £44,113 + 20% shift allowance - lunch allowance £396.25 = £53,331.85 + benefits 1 position open for 24/7 shift - Salary £44,113 + 35% shift allowance - lunch allowance £792.50 = £60,345.05 + benefits World-changing careers, enabled by Johnson Matthey. With more than 200 years history, join us and help to accelerate the transition to net-zero! You'll contribute to JM's mission as a world leader in sustainable technology, transforming energy and reducing carbon emissions for a cleaner, brighter future. As a mechanical Technician, you will join an established Mechanical Team within our top tier COMAH site, this role requires an experienced Industrial Mechanically biased maintenance technician who is able to demonstrate and execute a wide range of practical Mechanical skills, ranging from basic workshop skills including fabrication of pipework, steelwork, and plastics to working out on plant in a methodical & logical manner such that reactive faults can be identified and repaired safely, alongside working proactively by working on Planned maintenance & Routines scheduled by our Maintenance planner. As a Mechanical Technician, you will help drive our goals by: Responsible for the delivery of preventative/proactive maintenance of Mechanical systems and its sub or support systems Attending to any reactive/corrective maintenance that arises Fault finding, completing any repairs/replacements/calibration or set-up, installation of new systems/equipment, commissioning alongside operations on returning to service Contribute to improving the site performance in all aspects of safe operation, regulatory compliance, productive output and cost efficiency by improving the engineering reliability of site equipment and ensuring appropriate maintenance frequency of assets is complied with. Key skills that will help you succeed in this role: Previous Manufacturing/Chemical industry experience Knowledge and experience of site services, Gas, Compressed air, Steam, cooling water and how to deenergise and work on safely. Knowledge and use of technical drawings & operator manuals alongside Mechanical exploded view/cross sectional drawings & P&ID's to aid fault diagnosis process. Even if you only match some of the skills, we'd love to hear from you to discuss further! What we offer: We make sure salaries are fair, competitive and aligned to individual roles, experience and responsibilities. We are also supportive of hybrid and flexible working and offer benefits that support our employees' financial and physical wellbeing, such as: Competitive Retirement savings Company-matched Share Incentive Plan Life Assurance, Income Protection and Critical Illness Medical Plans/Health Assessments Retailer and Wellbeing Discounts Competitive Annual Incentive Plan Ready to make a meaningful impact on your career and the environment? Join us and help shape a sustainable future while advancing your career! At JM, inclusivity is central to our values. We create an environment where everyone can thrive, embracing diverse perspectives to tackle challenges and ensure all colleagues feel valued and connected. For any queries or accessibility requirements, please contact (url removed). We will work with you to make suitable adjustments at any stage of the recruitment process. All conversations are confidential, and your feedback is welcome to help us provide an accessible and positive recruitment experience. Closing date for applications: This job advertisement will be posted for a minimum of 2 weeks, early application is advised. To submit your application, please click the "Apply" button online. All applications are carefully considered and your details will be stored on our secure Application Management System. This is used throughout Johnson Matthey for the selection of suitable candidates for our vacancies as they arise.Johnson Matthey respects your privacy and is committed to protecting your personal information. For more information about how your personal data is used please view our privacy notice: Johnson Matthey Privacy Notice . By applying for this role and creating an account you are agreeing to the notice. Johnson Matthey Plc is an equal opportunities employer and positively encourages applications from suitably qualified and eligible candidates regardless of sex, race, disability, age, sexual orientation, marriage or civil partnership, pregnancy or maternity, religion or belief.
May 12, 2026
Full time
Job title: Mechanical Technician (Shift-Based Role) Location: Royston, UK (on-site) 2 positions open for day's shift - Salary £44,113 + 20% shift allowance - lunch allowance £396.25 = £53,331.85 + benefits 1 position open for 24/7 shift - Salary £44,113 + 35% shift allowance - lunch allowance £792.50 = £60,345.05 + benefits World-changing careers, enabled by Johnson Matthey. With more than 200 years history, join us and help to accelerate the transition to net-zero! You'll contribute to JM's mission as a world leader in sustainable technology, transforming energy and reducing carbon emissions for a cleaner, brighter future. As a mechanical Technician, you will join an established Mechanical Team within our top tier COMAH site, this role requires an experienced Industrial Mechanically biased maintenance technician who is able to demonstrate and execute a wide range of practical Mechanical skills, ranging from basic workshop skills including fabrication of pipework, steelwork, and plastics to working out on plant in a methodical & logical manner such that reactive faults can be identified and repaired safely, alongside working proactively by working on Planned maintenance & Routines scheduled by our Maintenance planner. As a Mechanical Technician, you will help drive our goals by: Responsible for the delivery of preventative/proactive maintenance of Mechanical systems and its sub or support systems Attending to any reactive/corrective maintenance that arises Fault finding, completing any repairs/replacements/calibration or set-up, installation of new systems/equipment, commissioning alongside operations on returning to service Contribute to improving the site performance in all aspects of safe operation, regulatory compliance, productive output and cost efficiency by improving the engineering reliability of site equipment and ensuring appropriate maintenance frequency of assets is complied with. Key skills that will help you succeed in this role: Previous Manufacturing/Chemical industry experience Knowledge and experience of site services, Gas, Compressed air, Steam, cooling water and how to deenergise and work on safely. Knowledge and use of technical drawings & operator manuals alongside Mechanical exploded view/cross sectional drawings & P&ID's to aid fault diagnosis process. Even if you only match some of the skills, we'd love to hear from you to discuss further! What we offer: We make sure salaries are fair, competitive and aligned to individual roles, experience and responsibilities. We are also supportive of hybrid and flexible working and offer benefits that support our employees' financial and physical wellbeing, such as: Competitive Retirement savings Company-matched Share Incentive Plan Life Assurance, Income Protection and Critical Illness Medical Plans/Health Assessments Retailer and Wellbeing Discounts Competitive Annual Incentive Plan Ready to make a meaningful impact on your career and the environment? Join us and help shape a sustainable future while advancing your career! At JM, inclusivity is central to our values. We create an environment where everyone can thrive, embracing diverse perspectives to tackle challenges and ensure all colleagues feel valued and connected. For any queries or accessibility requirements, please contact (url removed). We will work with you to make suitable adjustments at any stage of the recruitment process. All conversations are confidential, and your feedback is welcome to help us provide an accessible and positive recruitment experience. Closing date for applications: This job advertisement will be posted for a minimum of 2 weeks, early application is advised. To submit your application, please click the "Apply" button online. All applications are carefully considered and your details will be stored on our secure Application Management System. This is used throughout Johnson Matthey for the selection of suitable candidates for our vacancies as they arise.Johnson Matthey respects your privacy and is committed to protecting your personal information. For more information about how your personal data is used please view our privacy notice: Johnson Matthey Privacy Notice . By applying for this role and creating an account you are agreeing to the notice. Johnson Matthey Plc is an equal opportunities employer and positively encourages applications from suitably qualified and eligible candidates regardless of sex, race, disability, age, sexual orientation, marriage or civil partnership, pregnancy or maternity, religion or belief.
Senior Electronics Hardware Design Engineer up to 60k Base + Benefits South East Ref: ABJ6489 Onsite: Perm An experienced Senior Electronics Hardware Design Engineer is required to join a highly regarded engineering R&D team developing advanced hydraulic and control systems for large machinery. This is an excellent opportunity to work at the centre of a multidisciplinary engineering environment, contributing to the development of innovative electronic hardware from concept through to production and customer support. You will play a key role in both n ew product development and the ongoing support of existing electronic systems, working closely with software, project, production and sales teams. The role offers a varied mix of hardware design, embedded development, prototyping, testing and technical support, with genuine scope to influence future product architecture and innovation. Key Responsibilities Design and develop new electronic hardware and support existing products within control system applications Develop embedded firmware for DSPs and microcontrollers, including new functions and features Produce and maintain electronic schematics, PCB layouts and technical documentation Create and test prototype hardware and software, including validation and compliance testing Ensure electronic hardware meets relevant technical and quality standards Work closely with software engineers to support hardware integration and prototype development Support production with calibration, setup, testing and manufacturing queries Prepare and maintain Bills of Materials and support electronic component procurement Interface with sales teams to clarify technical requirements and assess feasibility Provide technical input to quotations and project planning Develop alternative technical solutions to meet customer requirements Contribute to research, product development strategy and future system architectures Support occasional hands-on assembly, modification and testing activities Collaborate with cross-functional teams across engineering, production and purchasing Qualifications & Experience Degree-qualified in Electronics Engineering or equivalent. Strong experience in electronic hardware design within control or instrumentation environments Experience working in a similar senior or design-focused role Strong problem-solving ability and attention to detail Digital circuit design including FPGA devices (e.g., Altera Cyclone) Embedded DSP and microcontroller integration (e.g., Texas Instruments DSP series) Embedded C development and firmware support FPGA development using VHDL (Quartus/Modelsim desirable) Low-noise analogue circuit design for sensor and transducer interfaces ADC and DAC interfacing Schematic capture and PCB layout (Altium desirable) Hardware/software integration and PC interface support Understanding of complete electronic systems and control architectures Practical electronics skills including soldering and assembly Industrial electronic packaging including connectors and enclosures Long-term career development; competitive salary and flexible benefits package. Onsite Full-time Permanent Competitive base salary up to 60k (dependent on experience) Flexible benefits package. To Apply: Contact Alison Basson on (phone number removed) / (phone number removed) Email: Ref: ABJ6489
May 12, 2026
Full time
Senior Electronics Hardware Design Engineer up to 60k Base + Benefits South East Ref: ABJ6489 Onsite: Perm An experienced Senior Electronics Hardware Design Engineer is required to join a highly regarded engineering R&D team developing advanced hydraulic and control systems for large machinery. This is an excellent opportunity to work at the centre of a multidisciplinary engineering environment, contributing to the development of innovative electronic hardware from concept through to production and customer support. You will play a key role in both n ew product development and the ongoing support of existing electronic systems, working closely with software, project, production and sales teams. The role offers a varied mix of hardware design, embedded development, prototyping, testing and technical support, with genuine scope to influence future product architecture and innovation. Key Responsibilities Design and develop new electronic hardware and support existing products within control system applications Develop embedded firmware for DSPs and microcontrollers, including new functions and features Produce and maintain electronic schematics, PCB layouts and technical documentation Create and test prototype hardware and software, including validation and compliance testing Ensure electronic hardware meets relevant technical and quality standards Work closely with software engineers to support hardware integration and prototype development Support production with calibration, setup, testing and manufacturing queries Prepare and maintain Bills of Materials and support electronic component procurement Interface with sales teams to clarify technical requirements and assess feasibility Provide technical input to quotations and project planning Develop alternative technical solutions to meet customer requirements Contribute to research, product development strategy and future system architectures Support occasional hands-on assembly, modification and testing activities Collaborate with cross-functional teams across engineering, production and purchasing Qualifications & Experience Degree-qualified in Electronics Engineering or equivalent. Strong experience in electronic hardware design within control or instrumentation environments Experience working in a similar senior or design-focused role Strong problem-solving ability and attention to detail Digital circuit design including FPGA devices (e.g., Altera Cyclone) Embedded DSP and microcontroller integration (e.g., Texas Instruments DSP series) Embedded C development and firmware support FPGA development using VHDL (Quartus/Modelsim desirable) Low-noise analogue circuit design for sensor and transducer interfaces ADC and DAC interfacing Schematic capture and PCB layout (Altium desirable) Hardware/software integration and PC interface support Understanding of complete electronic systems and control architectures Practical electronics skills including soldering and assembly Industrial electronic packaging including connectors and enclosures Long-term career development; competitive salary and flexible benefits package. Onsite Full-time Permanent Competitive base salary up to 60k (dependent on experience) Flexible benefits package. To Apply: Contact Alison Basson on (phone number removed) / (phone number removed) Email: Ref: ABJ6489
Job Title: Electrical and Multi- Skilled Technician Location: Royston, UK & Enfield, North London (site based) 1 Multi Skilled Technician (M&E)- Day shift, Monday- Friday - Salary: £45,589 plus free lunch, discretionary bonus and benefits 2 Electrical Engineer's - 24/7 shift - Salary £ 44,113.00 + 35% shift allowance + lunch allowance = £60,345.05 1 Instrument Technician - 24/7 shift - Salary £43,765.00 % shift allowance + lunch allowance = £59,875.25 World-changing careers, enabled by Johnson Matthey. With more than 200 years history, join us and help to accelerate the transition to net-zero! As an Electrical Technician, you'll contribute to JM's mission as a world leader in sustainable technology, transforming energy and reducing carbon emissions for a cleaner, brighter future. Here at JM, we are hiring Electrical, Instrument and Multi skilled Technician's to join our PGMS business. Platinum Group Metal Services (PGMS) is one of four businesses within the Efficient Natural Resources Sector that manages, distributes, refines and recycles precious metals and fabricates products using precious metals and related materials. The business unit also manufactures platinum group metals, minor metal compounds, organometallics and fine metal powders for high technology applications, as well as providing a range of management services for platinum group metals. The role: As an Electrical Technician, you will help drive our goals by: Safety should always be the highest priority for any tasks undertaken, in conjunction with our life saving policies and procedures Use of technical drawings & operator manuals alongside electrical schematic drawings & P&ID's to aid fault diagnosis process Reduce Plant downtime by proposing/implementing improvements in both the Electrical and instrumentation facets of the role Contribute to improving the site performance in all aspects of safe operation, regulatory compliance, productive output and cost efficiency by improving the engineering reliability of site equipment and ensuring appropriate maintenance frequency of assets is complied with and keep accurate written records of work carried out using SAP CMMS system Work alongside compliance & technical author to support the technical review of written maintenance documents and operational procedures Conducting Inspections, testing, calibration, adjustments and monitoring tasks as required to maintain efficient plant and build-in equipment reliability Key skills that will help you succeed in this role: An industrial Electrical and Instrumentation -based qualification to HNC/ONC level or equivalent Time served Apprenticeship with a further 5 years' experience Previous Manufacturing/Chemical industry experience Experience of structured problem-solving techniques, fault diagnosis What we offer: We make sure salaries are fair, competitive and aligned to individual roles, experience and responsibilities. We are also supportive of hybrid and flexible working and where applicable, offer life, medical and other benefits that support our employees' financial and physical wellbeing, such as: Retirement savings Share plans Saving accounts House saving funds Life and disability insurance Commuter allowances and loans Medical plans / health assessments Fitness discounts Ready to make a meaningful impact on your career and the environment? Join us and help shape a sustainable future while advancing your career! At JM, inclusivity is central to our values. We create an environment where everyone can thrive, embracing diverse perspectives to tackle challenges and ensure all colleagues feel valued and connected. For any queries or accessibility requirements, please contact (url removed). We will work with you to make suitable adjustments at any stage of the recruitment process. All conversations are confidential, and your feedback is welcome to help us provide an accessible and positive recruitment experience. Closing date for applications: This job advertisement will be posted for a minimum of 2 weeks, early application is advised. To submit your application, please click the "Apply" button online. All applications are carefully considered and your details will be stored on our secure Application Management System. This is used throughout Johnson Matthey for the selection of suitable candidates for our vacancies as they arise.Johnson Matthey respects your privacy and is committed to protecting your personal information. For more information about how your personal data is used please view our privacy notice: Johnson Matthey Privacy Notice . By applying for this role and creating an account you are agreeing to the notice. Johnson Matthey Plc is an equal opportunities employer and positively encourages applications from suitably qualified and eligible candidates regardless of sex, race, disability, age, sexual orientation, marriage or civil partnership, pregnancy or maternity, religion or belief.
May 12, 2026
Full time
Job Title: Electrical and Multi- Skilled Technician Location: Royston, UK & Enfield, North London (site based) 1 Multi Skilled Technician (M&E)- Day shift, Monday- Friday - Salary: £45,589 plus free lunch, discretionary bonus and benefits 2 Electrical Engineer's - 24/7 shift - Salary £ 44,113.00 + 35% shift allowance + lunch allowance = £60,345.05 1 Instrument Technician - 24/7 shift - Salary £43,765.00 % shift allowance + lunch allowance = £59,875.25 World-changing careers, enabled by Johnson Matthey. With more than 200 years history, join us and help to accelerate the transition to net-zero! As an Electrical Technician, you'll contribute to JM's mission as a world leader in sustainable technology, transforming energy and reducing carbon emissions for a cleaner, brighter future. Here at JM, we are hiring Electrical, Instrument and Multi skilled Technician's to join our PGMS business. Platinum Group Metal Services (PGMS) is one of four businesses within the Efficient Natural Resources Sector that manages, distributes, refines and recycles precious metals and fabricates products using precious metals and related materials. The business unit also manufactures platinum group metals, minor metal compounds, organometallics and fine metal powders for high technology applications, as well as providing a range of management services for platinum group metals. The role: As an Electrical Technician, you will help drive our goals by: Safety should always be the highest priority for any tasks undertaken, in conjunction with our life saving policies and procedures Use of technical drawings & operator manuals alongside electrical schematic drawings & P&ID's to aid fault diagnosis process Reduce Plant downtime by proposing/implementing improvements in both the Electrical and instrumentation facets of the role Contribute to improving the site performance in all aspects of safe operation, regulatory compliance, productive output and cost efficiency by improving the engineering reliability of site equipment and ensuring appropriate maintenance frequency of assets is complied with and keep accurate written records of work carried out using SAP CMMS system Work alongside compliance & technical author to support the technical review of written maintenance documents and operational procedures Conducting Inspections, testing, calibration, adjustments and monitoring tasks as required to maintain efficient plant and build-in equipment reliability Key skills that will help you succeed in this role: An industrial Electrical and Instrumentation -based qualification to HNC/ONC level or equivalent Time served Apprenticeship with a further 5 years' experience Previous Manufacturing/Chemical industry experience Experience of structured problem-solving techniques, fault diagnosis What we offer: We make sure salaries are fair, competitive and aligned to individual roles, experience and responsibilities. We are also supportive of hybrid and flexible working and where applicable, offer life, medical and other benefits that support our employees' financial and physical wellbeing, such as: Retirement savings Share plans Saving accounts House saving funds Life and disability insurance Commuter allowances and loans Medical plans / health assessments Fitness discounts Ready to make a meaningful impact on your career and the environment? Join us and help shape a sustainable future while advancing your career! At JM, inclusivity is central to our values. We create an environment where everyone can thrive, embracing diverse perspectives to tackle challenges and ensure all colleagues feel valued and connected. For any queries or accessibility requirements, please contact (url removed). We will work with you to make suitable adjustments at any stage of the recruitment process. All conversations are confidential, and your feedback is welcome to help us provide an accessible and positive recruitment experience. Closing date for applications: This job advertisement will be posted for a minimum of 2 weeks, early application is advised. To submit your application, please click the "Apply" button online. All applications are carefully considered and your details will be stored on our secure Application Management System. This is used throughout Johnson Matthey for the selection of suitable candidates for our vacancies as they arise.Johnson Matthey respects your privacy and is committed to protecting your personal information. For more information about how your personal data is used please view our privacy notice: Johnson Matthey Privacy Notice . By applying for this role and creating an account you are agreeing to the notice. Johnson Matthey Plc is an equal opportunities employer and positively encourages applications from suitably qualified and eligible candidates regardless of sex, race, disability, age, sexual orientation, marriage or civil partnership, pregnancy or maternity, religion or belief.
Quality Inspector We currently have a fantastic role for a Quality Inspector to work for a leading manufacturing company based in Eastleigh. Introduction The primary duties of the Quality Inspector will be to carry out mechanical inspection of component parts and support with the inspection of manufactured electronic assemblies and sub-assemblies. To prepare FAIR - First Article Inspection Reports to AS9102. Responsibilities To carry out inspection of machined and moulded parts Carry out First Article Inspections and produce reports - FAIRs to AS9102 standards. Perform internal calibration activities on instruments such as gauges and weighing scales. In-process and final inspection of electronic and electro-mechanical assemblies & sub-assemblies. Support the quality team with investigations, audits, and customer returns. Promote quality awareness across production teams by providing feedback and support. Champion continuous improvement where opportunities have been identified. Adhere to health, safety, and environmental standards in line with company policies. Ideal Skills & Experience Currently / previous experience in quality inspection within a manufacturing or engineering environment. Ability to read and interpret engineering drawings and specifications. Competent in using manual measurement tools (calipers, micrometers, gauges) Familiarity with AS9100 / ISO 9001 Strong attention to detail and accuracy Good communication skills Methodical, organised, and able to follow processes. Confident in using inspection measurement equipment and interpreting technical drawings. Good team player Desirable / Not Essential Skills Experience in aerospace, defence, or similarly regulated industries. Certification to IPC-A-610 and / or IPC/WHMA-A-620. CMM experience. Salary: Up to 32K Hours: Days Monday to Friday Benefits: Enhanced pension contributions Healthcare cashback plan Employee assistance programme Site incentive plan Share-save scheme Discounted memberships including RAC and Gym If you could be interested in this fantastic Quality Inspector opportunity, please apply and we'll be in touch to discuss further.
May 12, 2026
Full time
Quality Inspector We currently have a fantastic role for a Quality Inspector to work for a leading manufacturing company based in Eastleigh. Introduction The primary duties of the Quality Inspector will be to carry out mechanical inspection of component parts and support with the inspection of manufactured electronic assemblies and sub-assemblies. To prepare FAIR - First Article Inspection Reports to AS9102. Responsibilities To carry out inspection of machined and moulded parts Carry out First Article Inspections and produce reports - FAIRs to AS9102 standards. Perform internal calibration activities on instruments such as gauges and weighing scales. In-process and final inspection of electronic and electro-mechanical assemblies & sub-assemblies. Support the quality team with investigations, audits, and customer returns. Promote quality awareness across production teams by providing feedback and support. Champion continuous improvement where opportunities have been identified. Adhere to health, safety, and environmental standards in line with company policies. Ideal Skills & Experience Currently / previous experience in quality inspection within a manufacturing or engineering environment. Ability to read and interpret engineering drawings and specifications. Competent in using manual measurement tools (calipers, micrometers, gauges) Familiarity with AS9100 / ISO 9001 Strong attention to detail and accuracy Good communication skills Methodical, organised, and able to follow processes. Confident in using inspection measurement equipment and interpreting technical drawings. Good team player Desirable / Not Essential Skills Experience in aerospace, defence, or similarly regulated industries. Certification to IPC-A-610 and / or IPC/WHMA-A-620. CMM experience. Salary: Up to 32K Hours: Days Monday to Friday Benefits: Enhanced pension contributions Healthcare cashback plan Employee assistance programme Site incentive plan Share-save scheme Discounted memberships including RAC and Gym If you could be interested in this fantastic Quality Inspector opportunity, please apply and we'll be in touch to discuss further.
Production Supervisor Gloucester UK Shift based: Rotation Salary: - Starting (80%) = 45,867 + 7,460 - 12,120 shift premium - Fully competent & consistently performing well (90%) = 51,590 + 7,460 - 12,120 shift premium - Max, Over performance & identified as talent development (100%) = 57,322 + 7,460 - 12,120 shift premium Why Safran? Safran Landing Systems are a global leader in aircraft landing and braking systems, from commercial and business travel to military and defence fleets. Our expertise cover the entire life cycle of our products from end-to-end; OEM Design, Engineering & Manufacturing, through to Maintenance, Repair, and Overhaul (MRO). A global presence: Be part of a global aerospace, defence & space business with over 100,000 Colleagues, across 300 sites in 30 countries. Inclusive & empowering environment: We celebrate our differences and believe they make us stronger. We know that a fulfilling work environment is a key driver for innovative ideas and team success. Innovation at the core: Join our mission to decarbonise aerospace and make the world a safer place. Your ambitions can take us further. Mobility & training opportunities: We can support your ambitions with training, development, a personalised career plan and mobility opportunities. If you have big dreams, we'll support you to make them a reality. A culture of excellence: Join a team that values collaboration, integrity, and continuous improvement. Whatever your background, together we aim for excellence. We are looking for passionate individuals to join our Production team as a Supervisor at our Landing Systems MRO site in Gloucester. Your Role: The Supervisor role is a critical position within our MRO (maintenance, repair, and overhaul) operations where you will play an active role in the completion of production plans (MPS) with responsibility for the operational processes for multiple Landing Gears. You'll lead from the front and collaborate with other supervisors to coordinate completion of kits prior to despatch. Technically strong, drive and a structured approach will be vital! Key responsibilities: Lead the team, ensuring effective people management and use of reports and application of tool kits to support performance, conduct, absence, wellbeing, annual leave management, overtime reviews Take accountability for dedicated focals in your area of responsibility to control key processes, including but not limited to 5S, Calibration, Maintenance, Health & Safety, Tooling, technical documentation reviews and GPI's Ensure that works procedures and SOP's are adhered to at all times Lead on Continuous Improvement initiatives including process mapping, kaizen events, 5S etc Effectively cascade policy deployment initiatives and information across your team and wider business Effective control of WIP levels, rotable piece parts and SPT reduction. Champion adherence to the Airworthiness regulations and ensure compliance via robust and accurate works procedure reviews Enhance Employee Engagement - Contribute to QRQC meetings and own action plans associated to improvements in internal quality/rejects. Update during monthly reviews What You'll Bring: A strong engineering background is highly desired, ideally within a production, manufacturing or assembly environment (aerospace would be advantageous but not essential!) Demonstrable experience of leading & managing a team A working knowledge of lean principles, ideally to Green Belt level, and how to deploy these to drive continuous improvement within your area The ability to adopt an efficient 'hands-on' approach as appropriate Capable of interpreting and communicating KPI's and developing appropriate actions Good knowledge of Microsoft applications, in particular Power Point, Word, Excel Familiarity of 8D and QRQC tools would be advantageous At Safran, we understand that diversity and inclusion make teams stronger and more effective, and as an organisation, we are committed to fair and equitable employment practices for everyone. We also know that some candidates may be put off applying for jobs where they don't meet 100% of the criteria outlined in the advert, however, we encourage anybody to apply if you can demonstrate a variety of skills and experience relevant to the requirements of this role. Please let us know if you would like to discuss any reasonable adjustments to the application or hiring process that may better facilitate your participation.
May 12, 2026
Full time
Production Supervisor Gloucester UK Shift based: Rotation Salary: - Starting (80%) = 45,867 + 7,460 - 12,120 shift premium - Fully competent & consistently performing well (90%) = 51,590 + 7,460 - 12,120 shift premium - Max, Over performance & identified as talent development (100%) = 57,322 + 7,460 - 12,120 shift premium Why Safran? Safran Landing Systems are a global leader in aircraft landing and braking systems, from commercial and business travel to military and defence fleets. Our expertise cover the entire life cycle of our products from end-to-end; OEM Design, Engineering & Manufacturing, through to Maintenance, Repair, and Overhaul (MRO). A global presence: Be part of a global aerospace, defence & space business with over 100,000 Colleagues, across 300 sites in 30 countries. Inclusive & empowering environment: We celebrate our differences and believe they make us stronger. We know that a fulfilling work environment is a key driver for innovative ideas and team success. Innovation at the core: Join our mission to decarbonise aerospace and make the world a safer place. Your ambitions can take us further. Mobility & training opportunities: We can support your ambitions with training, development, a personalised career plan and mobility opportunities. If you have big dreams, we'll support you to make them a reality. A culture of excellence: Join a team that values collaboration, integrity, and continuous improvement. Whatever your background, together we aim for excellence. We are looking for passionate individuals to join our Production team as a Supervisor at our Landing Systems MRO site in Gloucester. Your Role: The Supervisor role is a critical position within our MRO (maintenance, repair, and overhaul) operations where you will play an active role in the completion of production plans (MPS) with responsibility for the operational processes for multiple Landing Gears. You'll lead from the front and collaborate with other supervisors to coordinate completion of kits prior to despatch. Technically strong, drive and a structured approach will be vital! Key responsibilities: Lead the team, ensuring effective people management and use of reports and application of tool kits to support performance, conduct, absence, wellbeing, annual leave management, overtime reviews Take accountability for dedicated focals in your area of responsibility to control key processes, including but not limited to 5S, Calibration, Maintenance, Health & Safety, Tooling, technical documentation reviews and GPI's Ensure that works procedures and SOP's are adhered to at all times Lead on Continuous Improvement initiatives including process mapping, kaizen events, 5S etc Effectively cascade policy deployment initiatives and information across your team and wider business Effective control of WIP levels, rotable piece parts and SPT reduction. Champion adherence to the Airworthiness regulations and ensure compliance via robust and accurate works procedure reviews Enhance Employee Engagement - Contribute to QRQC meetings and own action plans associated to improvements in internal quality/rejects. Update during monthly reviews What You'll Bring: A strong engineering background is highly desired, ideally within a production, manufacturing or assembly environment (aerospace would be advantageous but not essential!) Demonstrable experience of leading & managing a team A working knowledge of lean principles, ideally to Green Belt level, and how to deploy these to drive continuous improvement within your area The ability to adopt an efficient 'hands-on' approach as appropriate Capable of interpreting and communicating KPI's and developing appropriate actions Good knowledge of Microsoft applications, in particular Power Point, Word, Excel Familiarity of 8D and QRQC tools would be advantageous At Safran, we understand that diversity and inclusion make teams stronger and more effective, and as an organisation, we are committed to fair and equitable employment practices for everyone. We also know that some candidates may be put off applying for jobs where they don't meet 100% of the criteria outlined in the advert, however, we encourage anybody to apply if you can demonstrate a variety of skills and experience relevant to the requirements of this role. Please let us know if you would like to discuss any reasonable adjustments to the application or hiring process that may better facilitate your participation.
Instrumentation Calibration Engineer / Field Service Technician A fantastic opportunity for an instrumentation, calibration and field service professional to support sophisticated process instrumentation across industrial customer sites throughout the UK. If youve also worked in the following roles, wed also like to hear from you: EC&I Engineer, Calibration Technician, Controls Technician, Instrumen click apply for full job details
May 12, 2026
Full time
Instrumentation Calibration Engineer / Field Service Technician A fantastic opportunity for an instrumentation, calibration and field service professional to support sophisticated process instrumentation across industrial customer sites throughout the UK. If youve also worked in the following roles, wed also like to hear from you: EC&I Engineer, Calibration Technician, Controls Technician, Instrumen click apply for full job details
Ernest Gordon Recruitment Limited
Holmfirth, Yorkshire
Plant Technician (Plant Machinery / Wiring) £35,000 - £40,000 + GPS Manufacturer Training + Progression + Company Vehicle + Tools + Company Benefits + Performance Review Full Manufacturer Training Holmfirth (UK Travel) Are you a Plant Fitter or Technician with an interest in GPS, digital technology, or construction plant, looking to build a career in machine control with full manufacturer training? You will support the installation, calibration, and servicing of machine control systems on a range of construction plant equipment. This is a varied, hands-on role combining field-based work, technical support, and customer interaction, with full training provided as you develop your skills. The company is a respected name within the plant and construction sector, with a growing machine control division and strong plans for expansion. You will benefit from ongoing training, exposure to new technologies, and clear progression opportunities as the business grows. This role would suit a junior engineer, plant technician, or GPS systems enthusiast looking to step into a specialist technical role with excellent long-term career prospects. The Role: Install and calibrate GPS machine control systems (Leica, Trimble, Topcon) Provide technical support remotely and on-site Carry out servicing, repairs, and system calibration Deliver basic operator training to customers Assist with equipment checks, testing, and stock control Work closely with customers and internal teams The Person: Background or interest in plant, construction, GPS, or engineering Hands-on skills (mechanical, electrical, or hydraulic desirable) Full UK driving licence If you are interested in this role, click 'apply now' to forward an up-to-date copy of your CV. Reference Number: BBBH24591c We are an equal opportunities employer and welcome applications from all suitable candidates. The salary advertised is a guideline for this position. The offered remuneration will be dependent on the extent of your experience, qualifications, and skill set. Ernest Gordon Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job, you accept the T&C's, Privacy Policy and Disclaimers which can be found at our website.
May 11, 2026
Full time
Plant Technician (Plant Machinery / Wiring) £35,000 - £40,000 + GPS Manufacturer Training + Progression + Company Vehicle + Tools + Company Benefits + Performance Review Full Manufacturer Training Holmfirth (UK Travel) Are you a Plant Fitter or Technician with an interest in GPS, digital technology, or construction plant, looking to build a career in machine control with full manufacturer training? You will support the installation, calibration, and servicing of machine control systems on a range of construction plant equipment. This is a varied, hands-on role combining field-based work, technical support, and customer interaction, with full training provided as you develop your skills. The company is a respected name within the plant and construction sector, with a growing machine control division and strong plans for expansion. You will benefit from ongoing training, exposure to new technologies, and clear progression opportunities as the business grows. This role would suit a junior engineer, plant technician, or GPS systems enthusiast looking to step into a specialist technical role with excellent long-term career prospects. The Role: Install and calibrate GPS machine control systems (Leica, Trimble, Topcon) Provide technical support remotely and on-site Carry out servicing, repairs, and system calibration Deliver basic operator training to customers Assist with equipment checks, testing, and stock control Work closely with customers and internal teams The Person: Background or interest in plant, construction, GPS, or engineering Hands-on skills (mechanical, electrical, or hydraulic desirable) Full UK driving licence If you are interested in this role, click 'apply now' to forward an up-to-date copy of your CV. Reference Number: BBBH24591c We are an equal opportunities employer and welcome applications from all suitable candidates. The salary advertised is a guideline for this position. The offered remuneration will be dependent on the extent of your experience, qualifications, and skill set. Ernest Gordon Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job, you accept the T&C's, Privacy Policy and Disclaimers which can be found at our website.
The Role We are hiring a Field Service Engineer to support growing customer demand at our Bridport, UK location. This is a hands-on, field-based role focused on calibration and metrology work at customer sites. You will work closely with experienced engineers to learn the trade and gradually build toward full independence. This role is ideal for someone who enjoys working with their hands, solving technical problems, and being out in the field rather than behind a desk . What You ll Do Perform calibration, testing, and servicing of equipment at customer sites Travel to client locations and support on-site service work Assist experienced engineers during the onboarding period Learn and apply technical procedures, standards, and best practices Complete service documentation and reports accurately and thoroughly Communicate professionally with customers and technical teams Ensure all work meets quality and compliance standards Contribute to a strong team environment while developing technical expertise Training & Development This is a learn-on-the-job role with a structured ramp-up : 0 3 months: Shadow experienced engineers and assist with basic tasks 3 6 months: Begin handling simpler calibrations independently 9 12 months: Fully trained and operating independently What We re Looking For Strong hands-on technical aptitude (mechanical, electrical, or similar) Willingness to travel and work in the field regularly Ability to learn and apply technical concepts over time Strong work ethic, reliability, and follow-through Comfortable working both independently and as part of a team Good communication skills and professionalism with customers Detail-oriented with the ability to complete accurate documentation Positive attitude and willingness to get hands dirty and learn Preferred Backgrounds We welcome candidates from a variety of hands-on technical backgrounds, including: Mechanical or electrical technicians Field service or equipment repair roles Manufacturing or production environments Military technical experience Early-career engineers seeking hands-on experience Formal calibration experience is not required we will train the right person.
May 11, 2026
Full time
The Role We are hiring a Field Service Engineer to support growing customer demand at our Bridport, UK location. This is a hands-on, field-based role focused on calibration and metrology work at customer sites. You will work closely with experienced engineers to learn the trade and gradually build toward full independence. This role is ideal for someone who enjoys working with their hands, solving technical problems, and being out in the field rather than behind a desk . What You ll Do Perform calibration, testing, and servicing of equipment at customer sites Travel to client locations and support on-site service work Assist experienced engineers during the onboarding period Learn and apply technical procedures, standards, and best practices Complete service documentation and reports accurately and thoroughly Communicate professionally with customers and technical teams Ensure all work meets quality and compliance standards Contribute to a strong team environment while developing technical expertise Training & Development This is a learn-on-the-job role with a structured ramp-up : 0 3 months: Shadow experienced engineers and assist with basic tasks 3 6 months: Begin handling simpler calibrations independently 9 12 months: Fully trained and operating independently What We re Looking For Strong hands-on technical aptitude (mechanical, electrical, or similar) Willingness to travel and work in the field regularly Ability to learn and apply technical concepts over time Strong work ethic, reliability, and follow-through Comfortable working both independently and as part of a team Good communication skills and professionalism with customers Detail-oriented with the ability to complete accurate documentation Positive attitude and willingness to get hands dirty and learn Preferred Backgrounds We welcome candidates from a variety of hands-on technical backgrounds, including: Mechanical or electrical technicians Field service or equipment repair roles Manufacturing or production environments Military technical experience Early-career engineers seeking hands-on experience Formal calibration experience is not required we will train the right person.
Service Engineer - Metrology Equipment (Field & Site Based) Location: UK (Field-Based with some site work)Salary: Competitive + BenefitsType: Full-time, Permanent We are working with a well-established and growing engineering business specialising in advanced metrology solutions, supporting clients across manufacturing, aerospace, automotive, and precision engineering sectors. Due to continued growth, they are looking to appoint a Service Engineer to support the installation, maintenance, and servicing of high-precision measurement equipment. This is a varied role combining field-based work at customer sites with time spent supporting operations at the company's facility. The Role Installation, calibration, and servicing of metrology equipment at customer sites. Diagnosing faults and carrying out repairs, both on-site and in-house. Providing technical support and training to customers on equipment use and maintenance. Supporting internal teams with technical expertise and product knowledge. Ensuring all work is completed in line with quality and safety standards. Maintaining accurate service records and documentation. Requirements Experience in a service, maintenance, or calibration role within engineering or manufacturing. Exposure to metrology equipment (e.g. CMMs, laser scanners, portable arms) is highly desirable. Strong fault-finding and problem-solving skills. Willingness to travel regularly across the UK (and occasionally further afield). Full UK driving licence. Strong communication skills with a customer-focused approach. What's on Offer Opportunity to work with cutting-edge metrology technology. Varied role with a mix of field and site-based work. Ongoing training and development. Competitive salary, company vehicle, and benefits package. This is an excellent opportunity for an engineer looking to develop their career within a specialist and growing sector, working with advanced measurement technologies and a diverse client base. INDENG DCS Recruitment and all associated companies are committed to creating a working environment where diversity is celebrated and everyone is treated fairly, regardless of gender, gender identity, disability, ethnic origin, religion or belief, sexual orientation, marital or transgender status, age, or nationality
May 10, 2026
Full time
Service Engineer - Metrology Equipment (Field & Site Based) Location: UK (Field-Based with some site work)Salary: Competitive + BenefitsType: Full-time, Permanent We are working with a well-established and growing engineering business specialising in advanced metrology solutions, supporting clients across manufacturing, aerospace, automotive, and precision engineering sectors. Due to continued growth, they are looking to appoint a Service Engineer to support the installation, maintenance, and servicing of high-precision measurement equipment. This is a varied role combining field-based work at customer sites with time spent supporting operations at the company's facility. The Role Installation, calibration, and servicing of metrology equipment at customer sites. Diagnosing faults and carrying out repairs, both on-site and in-house. Providing technical support and training to customers on equipment use and maintenance. Supporting internal teams with technical expertise and product knowledge. Ensuring all work is completed in line with quality and safety standards. Maintaining accurate service records and documentation. Requirements Experience in a service, maintenance, or calibration role within engineering or manufacturing. Exposure to metrology equipment (e.g. CMMs, laser scanners, portable arms) is highly desirable. Strong fault-finding and problem-solving skills. Willingness to travel regularly across the UK (and occasionally further afield). Full UK driving licence. Strong communication skills with a customer-focused approach. What's on Offer Opportunity to work with cutting-edge metrology technology. Varied role with a mix of field and site-based work. Ongoing training and development. Competitive salary, company vehicle, and benefits package. This is an excellent opportunity for an engineer looking to develop their career within a specialist and growing sector, working with advanced measurement technologies and a diverse client base. INDENG DCS Recruitment and all associated companies are committed to creating a working environment where diversity is celebrated and everyone is treated fairly, regardless of gender, gender identity, disability, ethnic origin, religion or belief, sexual orientation, marital or transgender status, age, or nationality
Job Title: Mechanical Technician Location: Stockton-on-Tees World-changing careers, enabled by Johnson Matthey. With more than 200 years history, join us and help to accelerate the transition to net-zero! As a Mechanical Technician, you'll contribute to JM's mission as a world leader in sustainable technology, transforming energy and reducing carbon emissions for a cleaner, brighter future. The role: As a Mechanical Technician, you will help drive our goals by: Ensuring compliance to all site and company EHS policies and procedures, as well as adhering to legislative, regulatory, and quality assurance protocols. Fabricating, constructing and commissioning bespoke R&D and pilot plant equipment to facilitate delivery of business-critical research and manufacturing programmes. Responsible for ensuring equipment installations meet site and statutory specification. Maintaining and repairing existing installations to sustain equipment effectiveness and reliability, developing and working to standardised work procedures in support of preventative maintenance programmes. Timely and detailed recording of information as input into safety, maintenance, and operations KPIs. Performing compliance testing of new and existing pilot and research engineering and utility equipment, including safety critical system inspection and calibration to meet the requirements of company safety policy, legislative guidelines, and quality requirements. Responsible for the sign-off and recording of inspection test records. Key skills that will help you succeed in this role: BTEC Level 3 or Advanced Apprenticeship as Engineering Technician or similar, or equivalent experience in engineering with demonstrable job specific skills. - Essential Hands on experience working within both a project, and maintenance environment. - Essential Experience with the inspection, test, and overhaul of equipment, and able to complete quality inspection reports. - Essential Knowledge, skills, and attitude to resolve discipline specific plant problems autonomously, managing own workload. - Essential What we offer: We make sure salaries are fair, competitive and aligned to individual roles, experience and responsibilities. We are also supportive of hybrid and flexible working and where applicable, offer life, medical and other benefits that support our employees' financial and physical wellbeing, such as: Retirement savings Share plans Saving accounts House saving funds Life and disability insurance Commuter allowances and loans Medical plans / health assessments Fitness discounts Ready to make a meaningful impact on your career and the environment? Join us and help shape a sustainable future while advancing your career! At JM, inclusivity is central to our values. We create an environment where everyone can thrive, embracing diverse perspectives to tackle challenges and ensure all colleagues feel valued and connected. For any queries or accessibility requirements, please contact (url removed). We will work with you to make suitable adjustments at any stage of the recruitment process. All conversations are confidential, and your feedback is welcome to help us provide an accessible and positive recruitment experience. Closing date for applications: This job advertisement will be posted for a minimum of 2 weeks, early application is advised. To submit your application, please click the "Apply" button online. All applications are carefully considered and your details will be stored on our secure Application Management System. This is used throughout Johnson Matthey for the selection of suitable candidates for our vacancies as they arise.Johnson Matthey respects your privacy and is committed to protecting your personal information. For more information about how your personal data is used please view our privacy notice: Johnson Matthey Privacy Notice . By applying for this role and creating an account you are agreeing to the notice. Johnson Matthey Plc is an equal opportunities employer and positively encourages applications from suitably qualified and eligible candidates regardless of sex, race, disability, age, sexual orientation, marriage or civil partnership, pregnancy or maternity, religion or belief.
May 09, 2026
Full time
Job Title: Mechanical Technician Location: Stockton-on-Tees World-changing careers, enabled by Johnson Matthey. With more than 200 years history, join us and help to accelerate the transition to net-zero! As a Mechanical Technician, you'll contribute to JM's mission as a world leader in sustainable technology, transforming energy and reducing carbon emissions for a cleaner, brighter future. The role: As a Mechanical Technician, you will help drive our goals by: Ensuring compliance to all site and company EHS policies and procedures, as well as adhering to legislative, regulatory, and quality assurance protocols. Fabricating, constructing and commissioning bespoke R&D and pilot plant equipment to facilitate delivery of business-critical research and manufacturing programmes. Responsible for ensuring equipment installations meet site and statutory specification. Maintaining and repairing existing installations to sustain equipment effectiveness and reliability, developing and working to standardised work procedures in support of preventative maintenance programmes. Timely and detailed recording of information as input into safety, maintenance, and operations KPIs. Performing compliance testing of new and existing pilot and research engineering and utility equipment, including safety critical system inspection and calibration to meet the requirements of company safety policy, legislative guidelines, and quality requirements. Responsible for the sign-off and recording of inspection test records. Key skills that will help you succeed in this role: BTEC Level 3 or Advanced Apprenticeship as Engineering Technician or similar, or equivalent experience in engineering with demonstrable job specific skills. - Essential Hands on experience working within both a project, and maintenance environment. - Essential Experience with the inspection, test, and overhaul of equipment, and able to complete quality inspection reports. - Essential Knowledge, skills, and attitude to resolve discipline specific plant problems autonomously, managing own workload. - Essential What we offer: We make sure salaries are fair, competitive and aligned to individual roles, experience and responsibilities. We are also supportive of hybrid and flexible working and where applicable, offer life, medical and other benefits that support our employees' financial and physical wellbeing, such as: Retirement savings Share plans Saving accounts House saving funds Life and disability insurance Commuter allowances and loans Medical plans / health assessments Fitness discounts Ready to make a meaningful impact on your career and the environment? Join us and help shape a sustainable future while advancing your career! At JM, inclusivity is central to our values. We create an environment where everyone can thrive, embracing diverse perspectives to tackle challenges and ensure all colleagues feel valued and connected. For any queries or accessibility requirements, please contact (url removed). We will work with you to make suitable adjustments at any stage of the recruitment process. All conversations are confidential, and your feedback is welcome to help us provide an accessible and positive recruitment experience. Closing date for applications: This job advertisement will be posted for a minimum of 2 weeks, early application is advised. To submit your application, please click the "Apply" button online. All applications are carefully considered and your details will be stored on our secure Application Management System. This is used throughout Johnson Matthey for the selection of suitable candidates for our vacancies as they arise.Johnson Matthey respects your privacy and is committed to protecting your personal information. For more information about how your personal data is used please view our privacy notice: Johnson Matthey Privacy Notice . By applying for this role and creating an account you are agreeing to the notice. Johnson Matthey Plc is an equal opportunities employer and positively encourages applications from suitably qualified and eligible candidates regardless of sex, race, disability, age, sexual orientation, marriage or civil partnership, pregnancy or maternity, religion or belief.
If you enjoy hands-on electronics work and take pride in accuracy, consistency and quality, this role offers the chance to work on advanced RF technology without needing to be a specialist design engineer. This is not a theoretical engineering role. It is about what you can do with your hands. You will join a specialist manufacturing environment where your work directly impacts the performance of high-precision electronic systems used in critical applications. Why this role stands out You will sit at the centre of engineering, production and test, giving you real exposure across the full manufacturing lifecycle You will work with advanced RF and electronic systems, building valuable technical capability in a growing sector You will develop highly transferable skills in calibration, alignment and precision assembly Shift options allow you to significantly increase your earnings What you will be doing Aligning, tuning and calibrating electronic and RF components to tight specifications Carrying out test and verification activities using specialist equipment Supporting production by ensuring consistent, repeatable quality standards Working at PCB and component level to identify and resolve issues Recording results and maintaining accurate documentation Supporting continuous improvement of alignment and test processes What we are looking for Essential experience Hands-on electronics experience within a manufacturing, test or production environment Experience working with electronic assemblies or PCB-level work Strong manual dexterity and the ability to carry out precise, repetitive tasks High attention to detail and ability to work to tight specifications Useful but not essential Exposure to RF, microwave or similar technologies Experience using test equipment such as spectrum analysers, network analysers or signal generators Background in aerospace, defence, telecoms, instrumentation or electronics manufacturing Working pattern and salary Basic salary of 30,000 Shift options available 2-shift pattern with approximately 12.5% uplift Continental shift pattern with approximately 30% uplift The continental shift offers the strongest earning potential and is likely to attract candidates seeking higher take-home pay Security and eligibility BPSS clearance required You must have full right to work in the UK What this role really suits This role is ideal for a hands-on Electronics Technician, Test Technician or Calibration Technician who enjoys precision work and wants to build capability in a high-spec manufacturing environment It is not suited to purely theoretical engineers or senior RF design specialists Apply now If you are looking for a role where your practical skills make a real difference, apply today or contact us for a confidential discussion
May 09, 2026
Full time
If you enjoy hands-on electronics work and take pride in accuracy, consistency and quality, this role offers the chance to work on advanced RF technology without needing to be a specialist design engineer. This is not a theoretical engineering role. It is about what you can do with your hands. You will join a specialist manufacturing environment where your work directly impacts the performance of high-precision electronic systems used in critical applications. Why this role stands out You will sit at the centre of engineering, production and test, giving you real exposure across the full manufacturing lifecycle You will work with advanced RF and electronic systems, building valuable technical capability in a growing sector You will develop highly transferable skills in calibration, alignment and precision assembly Shift options allow you to significantly increase your earnings What you will be doing Aligning, tuning and calibrating electronic and RF components to tight specifications Carrying out test and verification activities using specialist equipment Supporting production by ensuring consistent, repeatable quality standards Working at PCB and component level to identify and resolve issues Recording results and maintaining accurate documentation Supporting continuous improvement of alignment and test processes What we are looking for Essential experience Hands-on electronics experience within a manufacturing, test or production environment Experience working with electronic assemblies or PCB-level work Strong manual dexterity and the ability to carry out precise, repetitive tasks High attention to detail and ability to work to tight specifications Useful but not essential Exposure to RF, microwave or similar technologies Experience using test equipment such as spectrum analysers, network analysers or signal generators Background in aerospace, defence, telecoms, instrumentation or electronics manufacturing Working pattern and salary Basic salary of 30,000 Shift options available 2-shift pattern with approximately 12.5% uplift Continental shift pattern with approximately 30% uplift The continental shift offers the strongest earning potential and is likely to attract candidates seeking higher take-home pay Security and eligibility BPSS clearance required You must have full right to work in the UK What this role really suits This role is ideal for a hands-on Electronics Technician, Test Technician or Calibration Technician who enjoys precision work and wants to build capability in a high-spec manufacturing environment It is not suited to purely theoretical engineers or senior RF design specialists Apply now If you are looking for a role where your practical skills make a real difference, apply today or contact us for a confidential discussion
