Senior Control Systems Engineer Reading Up to 65k My client is an established engineering organisation specialising in industrial automation, control systems, and process solutions, primarily within the utilities sector. They deliver end-to-end projects including design, software development, installation, and commissioning. Key Responsibilities Carry out site surveys and produce clear, structured reports Develop high-quality Functional Design Specifications (FDS) Design, program, and configure PLC, HMI, and SCADA systems Lead and deliver Factory Acceptance Tests (FAT), Customer FAT (CFAT), and Site Acceptance Tests (SAT) Produce Risk Assessments and Method Statements (RAMS) Support installation, commissioning, and fault-finding activities on site Manage project documentation, deliverables, and technical communications Collaborate with colleagues and support junior engineers through mentoring and training Essential Skills & Experience Experience in industrial automation and control systems Strong PLC programming experience (e.g. Allen Bradley or similar platforms) Knowledge of HMI/SCADA systems and process control principles Experience with commissioning and on-site delivery Electrical awareness and ability to work safely around control equipment Strong attention to detail in both software and documentation Effective communication skills (written and verbal) Ability to manage projects through to completion Competent IT and documentation skills Full UK driving licence Desirable Skills Experience with a range of PLC platforms (e.g. ControlLogix, Siemens, Mitsubishi) Familiarity with SCADA platforms (e.g. Wonderware, Iconics, Schneider) Industrial networking knowledge (e.g. Modbus, Profibus, Ethernet/IP) Experience with instrumentation (flow, level, pressure, drives) Electrical design or panel experience (including reading drawings) Experience within the utilities or water sector
May 16, 2026
Full time
Senior Control Systems Engineer Reading Up to 65k My client is an established engineering organisation specialising in industrial automation, control systems, and process solutions, primarily within the utilities sector. They deliver end-to-end projects including design, software development, installation, and commissioning. Key Responsibilities Carry out site surveys and produce clear, structured reports Develop high-quality Functional Design Specifications (FDS) Design, program, and configure PLC, HMI, and SCADA systems Lead and deliver Factory Acceptance Tests (FAT), Customer FAT (CFAT), and Site Acceptance Tests (SAT) Produce Risk Assessments and Method Statements (RAMS) Support installation, commissioning, and fault-finding activities on site Manage project documentation, deliverables, and technical communications Collaborate with colleagues and support junior engineers through mentoring and training Essential Skills & Experience Experience in industrial automation and control systems Strong PLC programming experience (e.g. Allen Bradley or similar platforms) Knowledge of HMI/SCADA systems and process control principles Experience with commissioning and on-site delivery Electrical awareness and ability to work safely around control equipment Strong attention to detail in both software and documentation Effective communication skills (written and verbal) Ability to manage projects through to completion Competent IT and documentation skills Full UK driving licence Desirable Skills Experience with a range of PLC platforms (e.g. ControlLogix, Siemens, Mitsubishi) Familiarity with SCADA platforms (e.g. Wonderware, Iconics, Schneider) Industrial networking knowledge (e.g. Modbus, Profibus, Ethernet/IP) Experience with instrumentation (flow, level, pressure, drives) Electrical design or panel experience (including reading drawings) Experience within the utilities or water sector
A leading UK provider of multi-disciplinary engineering solutions, delivering complex projects safely and sustainably across sectors including energy, water, pharmaceuticals and industrial infrastructure. With a strong engineering heritage and a people-first culture, this expanding business is committed to developing its teams through structured training, apprenticeships and clear career progression, making it an excellent place to build a long-term career. Control Systems Engineers x 7 £40,000 - £55,000 + BUPA + Overtime + Car Allowance + Hybrid Working + CENG Support Derbyshire based. Ref: 23693 Controls Engineer - The Role: Work through the whole life cycle of the project from completing design documentation, developing control software, testing, commissioning and handover Interpret User Requirement Specification packages and reverse engineer existing control system software Produce functional design specifications, configure PLC and SCADA packages, conduct factory and site testing and site-based commissioning. Co-ordinate and develop junior staff as required Monitor and plan projects to ensure they are completed on time and within budget Controls Engineer - The Person: Have a high regard for health and safety Be well organised and have good communication skills at all levels Be positive, approachable, willing and helpful Be a good team player Have experience in PLC software development using at least two manufacturers devices from Rockwell Automation, Siemens, Mitsubishi or Schneider Hold a full UK driving licence If you are an experienced Controls Engineer looking for a new challenge and have experience or interest in roles such as Automation Engineer, Systems Engineer, PLC Engineer, SCADA Engineer, or Electrical Controls Engineer, this role could be the perfect fit for you. Positions available for all levels of experience, Junior, Engineer, Senior and Team Leader. Lots of training and personal progression available. Support and assistance available to obtain degree and Chartered status. Hybrid working and car allowance available. For further information please contact Sharon Hill AE1
May 16, 2026
Full time
A leading UK provider of multi-disciplinary engineering solutions, delivering complex projects safely and sustainably across sectors including energy, water, pharmaceuticals and industrial infrastructure. With a strong engineering heritage and a people-first culture, this expanding business is committed to developing its teams through structured training, apprenticeships and clear career progression, making it an excellent place to build a long-term career. Control Systems Engineers x 7 £40,000 - £55,000 + BUPA + Overtime + Car Allowance + Hybrid Working + CENG Support Derbyshire based. Ref: 23693 Controls Engineer - The Role: Work through the whole life cycle of the project from completing design documentation, developing control software, testing, commissioning and handover Interpret User Requirement Specification packages and reverse engineer existing control system software Produce functional design specifications, configure PLC and SCADA packages, conduct factory and site testing and site-based commissioning. Co-ordinate and develop junior staff as required Monitor and plan projects to ensure they are completed on time and within budget Controls Engineer - The Person: Have a high regard for health and safety Be well organised and have good communication skills at all levels Be positive, approachable, willing and helpful Be a good team player Have experience in PLC software development using at least two manufacturers devices from Rockwell Automation, Siemens, Mitsubishi or Schneider Hold a full UK driving licence If you are an experienced Controls Engineer looking for a new challenge and have experience or interest in roles such as Automation Engineer, Systems Engineer, PLC Engineer, SCADA Engineer, or Electrical Controls Engineer, this role could be the perfect fit for you. Positions available for all levels of experience, Junior, Engineer, Senior and Team Leader. Lots of training and personal progression available. Support and assistance available to obtain degree and Chartered status. Hybrid working and car allowance available. For further information please contact Sharon Hill AE1
I am assisting my client with an exciting opportunity for a Project Manager to join a leading main contractor. The business undertake projects in various sectors including commercial, education and industrial projects, with values ranging between 5m and 20m. This is a freelance position for a No1 project manager for approximately 12 months, managing a new build 5m commercial office scheme in Warwick, from site set up through to client handover. As Project Manager you will be responsible for the project to ensure the safe completion, in accordance with programme, specification and budget. Key Responsibilities: Managing and maintaining the highest standards of safety Contributing to the value engineering and build-ability of the project Agreement of programmes and methods of construction with Planners and other appropriate production personnel Marshalling of resources for the overall control and execution of the works including the selection of sub-contractors to carry out the works Ensuring that key dates, resource requirements, production rates, overhead targets etc., are established, monitored and controlled Managing multi-disciplinary teams Cost Control Establishing and maintaining commercial and financial control systems, procedures and standards which will meet the contractual requirements of the projects Experience and Qualifications: You will ideally have experience of working specifically on Design and Build, industrial or commercial projects. A proven track of success of delivering projects up to 5m- 20m in value You will have experience of working for a main contractor. Good communication verbally and in written form. Hold current CSCS, SMSTS and first aid certification Present a clean and tidy site and have a good understanding of the considerate contractor's requirements to achieve high score To apply for this role, please complete the fields below
May 16, 2026
Contractor
I am assisting my client with an exciting opportunity for a Project Manager to join a leading main contractor. The business undertake projects in various sectors including commercial, education and industrial projects, with values ranging between 5m and 20m. This is a freelance position for a No1 project manager for approximately 12 months, managing a new build 5m commercial office scheme in Warwick, from site set up through to client handover. As Project Manager you will be responsible for the project to ensure the safe completion, in accordance with programme, specification and budget. Key Responsibilities: Managing and maintaining the highest standards of safety Contributing to the value engineering and build-ability of the project Agreement of programmes and methods of construction with Planners and other appropriate production personnel Marshalling of resources for the overall control and execution of the works including the selection of sub-contractors to carry out the works Ensuring that key dates, resource requirements, production rates, overhead targets etc., are established, monitored and controlled Managing multi-disciplinary teams Cost Control Establishing and maintaining commercial and financial control systems, procedures and standards which will meet the contractual requirements of the projects Experience and Qualifications: You will ideally have experience of working specifically on Design and Build, industrial or commercial projects. A proven track of success of delivering projects up to 5m- 20m in value You will have experience of working for a main contractor. Good communication verbally and in written form. Hold current CSCS, SMSTS and first aid certification Present a clean and tidy site and have a good understanding of the considerate contractor's requirements to achieve high score To apply for this role, please complete the fields below
This role provides a unique chance to shape how MBDA undertakes production testing. Salary: Circa £52,000 depending on experience Dynamic (hybrid) working: 4-5 days per week on-site due to workload classification Security Clearance: British Citizen only. Restrictions and/or limitations relating to nationality and/or rights to work may apply. As a minimum and after offer stage, all successful candidates will need to undergo HMG Basic Personnel Security Standard checks (BPSS), which are managed by the MBDA Personnel Security Team. What we can offer you: Company bonus: Up to £2,500 (based on company performance and will vary year to year) Pension: maximum total (employer and employee) contribution of up to 14% Overtime: opportunity for paid overtime Flexi Leave: Up to 15 additional days Flexible working: We welcome applicants who are looking for flexible working arrangements Enhanced parental leave: offers up to 26 weeks for maternity, adoption and shared parental leave -enhancements are available for paternity leave, neonatal leave and fertility testing and treatments Facilities: Fantastic site facilities including subsidised meals, free car parking and much more The opportunity: This opportunity is for a Principal Test Engineer to join the Manufacturing organisation supporting test system introduction and test and diagnostics of electrical/electronic weapon systems and sub-assemblies during the development / early production phase. You will work as part of the Manufacturing UK Test Engineering function and will be deployed to the Stevenage-based Manufacturing Equipment team, responsible for development testing and ensuring production readiness of new products and their test solutions. Providing Test Engineering support during Design / Development phases from initial concept through to Production Readiness Review and release to Operations. Supporting Test Facility introduction and ensure that appropriate configuration control of equipment and facilities is in place prior to use, including generating supporting test specifications and operator instructions. Supporting testing of electrical/electronic weapon systems, sub-assemblies and circuit cards, with diagnosis of development test failures down to circuit card and potentially component level, including identification of proposed remedial and corrective actions. Working closely with Operations, design teams and other stakeholders to overcome any technical challenges. Providing technical support and advice to the Test Engineering Team Lead and guiding and mentoring less experienced test engineers within the team. You will be working with a small team of dedicated engineers in a fast-paced but friendly and inclusive manufacturing environment. The team has a great mix of personnel ranging from apprentices and graduate engineers through to experienced technical practitioners, all striving to deliver technical excellence across a number of different products in development and production. What we're looking for from you: Minimum HNC level of qualification or equivalent (ideally HND/degree) in a relevant subject, plus significant experience in digital, analogue and RF electronics manufacture and test. A good understanding of electrical/electronic and RF measurement and test principles and test equipment, as well as systems-level functional testing. Experience of the product development lifecycle and supporting processes, in an electronics manufacturing environment. Significant experience of using both manual and automated test equipment, preferably in a defence organisation or similar manufacturing environment. The ability to plan and organise own work in order to ensure multiple tasks can be prioritised and delivered against Project objectives, whilst being available to support others. Good verbal and written communication skills, including working within a team, generation of test specifications, operator instructions and technical reports based on higher-level requirements. Our company: Peace is not a given, Freedom is not a given, Sovereignty is not a given MBDA is a leading defence organisation. We are proud of the role we play in supporting the Armed Forces who protect our nations. We partner with governments to work together towards a common goal, defending our freedom. We are proud of our employee-led networks, examples include: Gender Equality, Pride, Menopause Matters, Parents and Carers, Armed Forces, Ethnic Diversity, Neurodiversity, Disability and more We recognise that everyone is unique, and we encourage you to speak to us should you require any advice, support or adjustments throughout our recruitment process. Follow us on LinkedIn (MBDA), X Instagram (MBDA_UK) and Glassdoor or visit our MBDA Careers website for more information.
May 16, 2026
Full time
This role provides a unique chance to shape how MBDA undertakes production testing. Salary: Circa £52,000 depending on experience Dynamic (hybrid) working: 4-5 days per week on-site due to workload classification Security Clearance: British Citizen only. Restrictions and/or limitations relating to nationality and/or rights to work may apply. As a minimum and after offer stage, all successful candidates will need to undergo HMG Basic Personnel Security Standard checks (BPSS), which are managed by the MBDA Personnel Security Team. What we can offer you: Company bonus: Up to £2,500 (based on company performance and will vary year to year) Pension: maximum total (employer and employee) contribution of up to 14% Overtime: opportunity for paid overtime Flexi Leave: Up to 15 additional days Flexible working: We welcome applicants who are looking for flexible working arrangements Enhanced parental leave: offers up to 26 weeks for maternity, adoption and shared parental leave -enhancements are available for paternity leave, neonatal leave and fertility testing and treatments Facilities: Fantastic site facilities including subsidised meals, free car parking and much more The opportunity: This opportunity is for a Principal Test Engineer to join the Manufacturing organisation supporting test system introduction and test and diagnostics of electrical/electronic weapon systems and sub-assemblies during the development / early production phase. You will work as part of the Manufacturing UK Test Engineering function and will be deployed to the Stevenage-based Manufacturing Equipment team, responsible for development testing and ensuring production readiness of new products and their test solutions. Providing Test Engineering support during Design / Development phases from initial concept through to Production Readiness Review and release to Operations. Supporting Test Facility introduction and ensure that appropriate configuration control of equipment and facilities is in place prior to use, including generating supporting test specifications and operator instructions. Supporting testing of electrical/electronic weapon systems, sub-assemblies and circuit cards, with diagnosis of development test failures down to circuit card and potentially component level, including identification of proposed remedial and corrective actions. Working closely with Operations, design teams and other stakeholders to overcome any technical challenges. Providing technical support and advice to the Test Engineering Team Lead and guiding and mentoring less experienced test engineers within the team. You will be working with a small team of dedicated engineers in a fast-paced but friendly and inclusive manufacturing environment. The team has a great mix of personnel ranging from apprentices and graduate engineers through to experienced technical practitioners, all striving to deliver technical excellence across a number of different products in development and production. What we're looking for from you: Minimum HNC level of qualification or equivalent (ideally HND/degree) in a relevant subject, plus significant experience in digital, analogue and RF electronics manufacture and test. A good understanding of electrical/electronic and RF measurement and test principles and test equipment, as well as systems-level functional testing. Experience of the product development lifecycle and supporting processes, in an electronics manufacturing environment. Significant experience of using both manual and automated test equipment, preferably in a defence organisation or similar manufacturing environment. The ability to plan and organise own work in order to ensure multiple tasks can be prioritised and delivered against Project objectives, whilst being available to support others. Good verbal and written communication skills, including working within a team, generation of test specifications, operator instructions and technical reports based on higher-level requirements. Our company: Peace is not a given, Freedom is not a given, Sovereignty is not a given MBDA is a leading defence organisation. We are proud of the role we play in supporting the Armed Forces who protect our nations. We partner with governments to work together towards a common goal, defending our freedom. We are proud of our employee-led networks, examples include: Gender Equality, Pride, Menopause Matters, Parents and Carers, Armed Forces, Ethnic Diversity, Neurodiversity, Disability and more We recognise that everyone is unique, and we encourage you to speak to us should you require any advice, support or adjustments throughout our recruitment process. Follow us on LinkedIn (MBDA), X Instagram (MBDA_UK) and Glassdoor or visit our MBDA Careers website for more information.
Lead Software Engineer Up to £90,000 per annum plus bonus Milton Keynes (Twice a week on site) VIQU have partnered with a growing SaaS organisation who are hiring a Lead Software Engineer to play a key role in shaping technical direction of the product whilst leading a team of five software engineers. The is very much a player coach role (30% management, 70% architecture/coding), and is an opportunity to shape engineering standards at a company at a pivotal point in their growth, having an influence over the technical strategy whilst remaining hands on. Experience required: Background in modern .NET/C# development & architecture. A track record of leading and mentoring teams of engineers. Cloud experience with AWS (Lambda, S3, SNS, API Gateway, and event-driven architecture). Experience with React/ Angular. Experience with testing frameworks and quality engineering practices (unit & integration testing and test driven development). Experience building and maintaining CI/CD pipelines. Previously implemented AI driven coding efficiencies within teams. Knowledge of Docker and containerised applications. Hands on experience with serverless cloud architecture would be a nice to have. Duties of the Lead Software Engineer Lead a team of 5 engineers within a scaled agile environment. Conducting code and architecture reviews to maintain consistency, quality, and maintainability whilst remaining hands on in the code. Embedding robust testing practices (TDD, integration testing, BDD) and driving automation across regression suites. Design and architect solutions using CQRS (Command Query Responsibility Segregation) and event-driven architecture patterns. Working within AWS (Lambda, API Gateway, IAM, event-based services). Exploring and introducing AI related efficiencies. Apply now to speak with VIQU IT in confidence. Or reach out to Jack McManus via the (url removed) Do you know someone great? We ll thank you with up to £1,000 if your referral is successful (terms apply). For more exciting roles and opportunities like this, please follow us on IT Recruitment
May 16, 2026
Full time
Lead Software Engineer Up to £90,000 per annum plus bonus Milton Keynes (Twice a week on site) VIQU have partnered with a growing SaaS organisation who are hiring a Lead Software Engineer to play a key role in shaping technical direction of the product whilst leading a team of five software engineers. The is very much a player coach role (30% management, 70% architecture/coding), and is an opportunity to shape engineering standards at a company at a pivotal point in their growth, having an influence over the technical strategy whilst remaining hands on. Experience required: Background in modern .NET/C# development & architecture. A track record of leading and mentoring teams of engineers. Cloud experience with AWS (Lambda, S3, SNS, API Gateway, and event-driven architecture). Experience with React/ Angular. Experience with testing frameworks and quality engineering practices (unit & integration testing and test driven development). Experience building and maintaining CI/CD pipelines. Previously implemented AI driven coding efficiencies within teams. Knowledge of Docker and containerised applications. Hands on experience with serverless cloud architecture would be a nice to have. Duties of the Lead Software Engineer Lead a team of 5 engineers within a scaled agile environment. Conducting code and architecture reviews to maintain consistency, quality, and maintainability whilst remaining hands on in the code. Embedding robust testing practices (TDD, integration testing, BDD) and driving automation across regression suites. Design and architect solutions using CQRS (Command Query Responsibility Segregation) and event-driven architecture patterns. Working within AWS (Lambda, API Gateway, IAM, event-based services). Exploring and introducing AI related efficiencies. Apply now to speak with VIQU IT in confidence. Or reach out to Jack McManus via the (url removed) Do you know someone great? We ll thank you with up to £1,000 if your referral is successful (terms apply). For more exciting roles and opportunities like this, please follow us on IT Recruitment
Machine Learning Engineer - London Join the analytics team as a Machine Learning Engineer in the Technology industry, where you'll design and implement innovative machine learning solutions. This permanent role in London offers an exciting opportunity to work on impactful projects in a forward thinking environment. Client Details Machine Learning Engineer - London This opportunity is with a medium-sized software development organisation. The company is committed to utilising advanced analytics and machine learning to enhance its services and deliver value to its clients. Description Machine Learning Engineer - London This role focuses on training custom models, building robust ML pipelines, and deploying systems at scale from research experimentation through to monitored production services. Design, train, and optimise machine learning models for audio processing tasks such as speaker diarization, automatic speech recognition (ASR), and voice activity detection. Build and maintain training and inference pipelines using PyTorch, and related ML frameworks Source, curate, and prepare training datasets; implement preprocessing, augmentation, and validation workflows. Run structured experiments, evaluate model performance, and iterate based on measurable results Build, deploy, and operate end-to-end MLOps pipelines, including experiment tracking, model versioning, and production monitoring. Package and deploy models using Docker and cloud infrastructure, with a focus on reliability and scalability Design and deploy agent-based AI systems that can execute multi-step workflows and integrate with external tools. Build Model Context Protocol (MCP) servers to enable standardised integration between models, APIs, and data sources. Evaluate and integrate large language models into production systems where they add clear value. Collaborate with product and business teams to translate requirements into practical ML solutions. Profile Machine Learning Engineer - London A successful Machine Learning Engineer should have: Strong foundation in machine learning, deep learning, and optimisation Hands-on experience training, evaluating, and deploying ML models in real-world systems Proficiency with PyTorch (preferred) or TensorFlow; familiarity with the Hugging Face ecosystem Experience with audio or speech models and frameworks. Experience building and maintaining end-to-end ML pipelines and MLOps tooling (e.g. MLflow, Weights & Biases, DVC, or similar). Strong Python skills; experience with Docker, CI/CD, and cloud platforms (Azure preferred) Practical experience designing agentic AI systems and integrating models with external services Comfortable owning the full ML lifecycle, from data preparation to production deployment Clear communicator who can work effectively across technical and non-technical teams Job Offer Machine Learning Engineer - London Competitive salary ranging from 75,000 to 95,000 per annum. Comprehensive benefits package to support your well-being. Opportunity to work in a leading organisation within the insurance industry. Collaborative and innovative work environment in London. Chance to work on impactful projects using the latest technologies. If you're a passionate Machine Learning Engineer looking to make a difference in the Technology sector, we encourage you to apply and be part of this exciting opportunity in London
May 16, 2026
Full time
Machine Learning Engineer - London Join the analytics team as a Machine Learning Engineer in the Technology industry, where you'll design and implement innovative machine learning solutions. This permanent role in London offers an exciting opportunity to work on impactful projects in a forward thinking environment. Client Details Machine Learning Engineer - London This opportunity is with a medium-sized software development organisation. The company is committed to utilising advanced analytics and machine learning to enhance its services and deliver value to its clients. Description Machine Learning Engineer - London This role focuses on training custom models, building robust ML pipelines, and deploying systems at scale from research experimentation through to monitored production services. Design, train, and optimise machine learning models for audio processing tasks such as speaker diarization, automatic speech recognition (ASR), and voice activity detection. Build and maintain training and inference pipelines using PyTorch, and related ML frameworks Source, curate, and prepare training datasets; implement preprocessing, augmentation, and validation workflows. Run structured experiments, evaluate model performance, and iterate based on measurable results Build, deploy, and operate end-to-end MLOps pipelines, including experiment tracking, model versioning, and production monitoring. Package and deploy models using Docker and cloud infrastructure, with a focus on reliability and scalability Design and deploy agent-based AI systems that can execute multi-step workflows and integrate with external tools. Build Model Context Protocol (MCP) servers to enable standardised integration between models, APIs, and data sources. Evaluate and integrate large language models into production systems where they add clear value. Collaborate with product and business teams to translate requirements into practical ML solutions. Profile Machine Learning Engineer - London A successful Machine Learning Engineer should have: Strong foundation in machine learning, deep learning, and optimisation Hands-on experience training, evaluating, and deploying ML models in real-world systems Proficiency with PyTorch (preferred) or TensorFlow; familiarity with the Hugging Face ecosystem Experience with audio or speech models and frameworks. Experience building and maintaining end-to-end ML pipelines and MLOps tooling (e.g. MLflow, Weights & Biases, DVC, or similar). Strong Python skills; experience with Docker, CI/CD, and cloud platforms (Azure preferred) Practical experience designing agentic AI systems and integrating models with external services Comfortable owning the full ML lifecycle, from data preparation to production deployment Clear communicator who can work effectively across technical and non-technical teams Job Offer Machine Learning Engineer - London Competitive salary ranging from 75,000 to 95,000 per annum. Comprehensive benefits package to support your well-being. Opportunity to work in a leading organisation within the insurance industry. Collaborative and innovative work environment in London. Chance to work on impactful projects using the latest technologies. If you're a passionate Machine Learning Engineer looking to make a difference in the Technology sector, we encourage you to apply and be part of this exciting opportunity in London
Powertrain Technical Project Lead Consultant (Engine Systems Focus) 6 Months initially Outside IR35 up to 45 per hour Woking, Surrey (Hybrid Working) ASAP start Purpose of the Role Reporting to the Principal Engineer and working with the Technical Program Manager on powertrain engine system programs . Working alongside Project Engineers in a small team, responsible for the delivery of internal combustion engine components (e.g., pistons, connecting rods, crankshafts, cylinder blocks, cylinder heads, valvetrain systems) into small volume, high-performance specialist vehicle programs . Essential Criteria "Cradle to Grave" approach - working within a cross-functional team from R&D stage, through concept, design release, production launch, and series production support to deliver full vehicle performance targets and contribute to overall business KPIs. Responsible for releasing designs that meet the following targets through coordination of internal and external resources: Cost (piece, tooling, development & validation) Performance (durability, strength, efficiency, friction reduction, and combustion performance cascaded from full vehicle targets to component-level specifications) Timing Feasibility (supporting in-house manufacturing/assembly processes such as machining, casting, forging, and supplier capability) Key Responsibilities Engine System Delivery Lead the development and integration of core engine mechanical components , including: Pistons and piston rings Connecting rods Crankshaft and bearings Cylinder block and liners Cylinder head and valvetrain Ensure designs meet performance targets such as thermal/mechanical loads, fatigue life, lubrication requirements, and emissions compliance . Problem Solving Apply proactive problem avoidance at early stages (Risk Assessments, DFMEA, lessons learned). Lead hands-on issue resolution during: Prototype builds Engine dyno testing Vehicle validation Series production Address issues such as wear, NVH, durability failures, oil consumption, and tolerance stack-ups. Reporting & Control Manage and maintain accurate Bill of Materials (BOM) : Part numbering and structuring Engineering change processes Track and manage: Component weight (critical for performance targets) Costs (forecasting, risks, and opportunities) Program timing and delivery status Cost Engineering Provide rapid cost estimates to support early concept decisions for engine components. Deliver detailed cost breakdowns (materials, machining, treatments, assembly). Support sourcing decisions using market insight and value analysis. Drive continuous improvement in cost modelling through benchmarking and supplier engagement. Additional Requirements CATIA V5 / V6 2D/3D skills with strong GD&T application experience. High level of technical knowledge and experience in: Engine mechanical design and architecture Materials and manufacturing processes (casting, forging, machining, coatings) Engine testing (dyno, durability, performance validation) Production and industrialisation of engine components SAP capability including: Engineering Release Management BOM structuring Cost management
May 16, 2026
Contractor
Powertrain Technical Project Lead Consultant (Engine Systems Focus) 6 Months initially Outside IR35 up to 45 per hour Woking, Surrey (Hybrid Working) ASAP start Purpose of the Role Reporting to the Principal Engineer and working with the Technical Program Manager on powertrain engine system programs . Working alongside Project Engineers in a small team, responsible for the delivery of internal combustion engine components (e.g., pistons, connecting rods, crankshafts, cylinder blocks, cylinder heads, valvetrain systems) into small volume, high-performance specialist vehicle programs . Essential Criteria "Cradle to Grave" approach - working within a cross-functional team from R&D stage, through concept, design release, production launch, and series production support to deliver full vehicle performance targets and contribute to overall business KPIs. Responsible for releasing designs that meet the following targets through coordination of internal and external resources: Cost (piece, tooling, development & validation) Performance (durability, strength, efficiency, friction reduction, and combustion performance cascaded from full vehicle targets to component-level specifications) Timing Feasibility (supporting in-house manufacturing/assembly processes such as machining, casting, forging, and supplier capability) Key Responsibilities Engine System Delivery Lead the development and integration of core engine mechanical components , including: Pistons and piston rings Connecting rods Crankshaft and bearings Cylinder block and liners Cylinder head and valvetrain Ensure designs meet performance targets such as thermal/mechanical loads, fatigue life, lubrication requirements, and emissions compliance . Problem Solving Apply proactive problem avoidance at early stages (Risk Assessments, DFMEA, lessons learned). Lead hands-on issue resolution during: Prototype builds Engine dyno testing Vehicle validation Series production Address issues such as wear, NVH, durability failures, oil consumption, and tolerance stack-ups. Reporting & Control Manage and maintain accurate Bill of Materials (BOM) : Part numbering and structuring Engineering change processes Track and manage: Component weight (critical for performance targets) Costs (forecasting, risks, and opportunities) Program timing and delivery status Cost Engineering Provide rapid cost estimates to support early concept decisions for engine components. Deliver detailed cost breakdowns (materials, machining, treatments, assembly). Support sourcing decisions using market insight and value analysis. Drive continuous improvement in cost modelling through benchmarking and supplier engagement. Additional Requirements CATIA V5 / V6 2D/3D skills with strong GD&T application experience. High level of technical knowledge and experience in: Engine mechanical design and architecture Materials and manufacturing processes (casting, forging, machining, coatings) Engine testing (dyno, durability, performance validation) Production and industrialisation of engine components SAP capability including: Engineering Release Management BOM structuring Cost management
First Military Recruitment Ltd
Workington, Cumbria
MB943: Sustainability Manager Location: Workington Salary: £60,000 + £5,750 Car Allowance Working Hours: Monday to Friday, 37.5 hours per week Additional Company Benefits: Exceptional Career Development Opportunities, Company Car/Car Allowance (Depending on job grade), Pension matched up to 8%, 25 days annual leave plus holiday (opportunity to buy/sell leave will be implemented from January 2026), Private medical insurance, Free 24/7 EAP Overview: First Military Recruitment is proudly working in partnership with a fantastic national construction business who are looking to recruit a Sustainability Manager on a permanent basis due to growth based at either their Workington depot. Duties and Responsibilities: Manage the sustainability team Develop project specific sustainability management plans which are aligned to strategy plans where appropriate. Liaise with the project site teams and supply chain on site and ensure that Client & Stakeholder sustainability objectives are met within the required timeframe Develop communication tools (eg guidance & training materials, newsletters, alerts) to inform personnel & stakeholders about sustainability issues and performance To help the company deliver its ISO 50001 commitments and vision to sites. Assist in the necessary data collection and reporting in line with requirements for energy and emission reporting. To identify opportunities and gains from projects that can add value for money or deliver the requirements in a more sustainable way. To assist the designers and engineers in achieving step change and looking to using sustainable materials in the design and construction. Capture best practice and produce case studies to share information and improve performance Engage with Procurement team to drive continuous improvement against HTUK objectives and client requirements Report on a monthly basis on project and business sustainability performance Identify opportunities to develop own skills and experience consistent with supporting projects and to continually challenge own practice and development to provide a high-quality support Skills and Experience: Good knowledge of sustainability issues in construction, through experience, training, education. Willing to undertake further training. Wiling to lead by example. Preferably Degree level qualified, must be working towards (or hold) ISEF membership at an appropriate level (or similar professional body). Must have a good understanding of the construction process, the desire to understand and work with engineers to find better sustainable solutions to issues within the established constraints. Good understanding of carbon reduction planning MB943: Sustainability Manager Location: Workington Salary: £60,000 + £5,750 Car Allowance Working Hours: Monday to Friday, 37.5 hours per week Additional Company Benefits: Exceptional Career Development Opportunities, Company Car/Car Allowance (Depending on job grade), Pension matched up to 8%, 25 days annual leave plus holiday (opportunity to buy/sell leave will be implemented from January 2026), Private medical insurance, Free 24/7 EAP
May 16, 2026
Full time
MB943: Sustainability Manager Location: Workington Salary: £60,000 + £5,750 Car Allowance Working Hours: Monday to Friday, 37.5 hours per week Additional Company Benefits: Exceptional Career Development Opportunities, Company Car/Car Allowance (Depending on job grade), Pension matched up to 8%, 25 days annual leave plus holiday (opportunity to buy/sell leave will be implemented from January 2026), Private medical insurance, Free 24/7 EAP Overview: First Military Recruitment is proudly working in partnership with a fantastic national construction business who are looking to recruit a Sustainability Manager on a permanent basis due to growth based at either their Workington depot. Duties and Responsibilities: Manage the sustainability team Develop project specific sustainability management plans which are aligned to strategy plans where appropriate. Liaise with the project site teams and supply chain on site and ensure that Client & Stakeholder sustainability objectives are met within the required timeframe Develop communication tools (eg guidance & training materials, newsletters, alerts) to inform personnel & stakeholders about sustainability issues and performance To help the company deliver its ISO 50001 commitments and vision to sites. Assist in the necessary data collection and reporting in line with requirements for energy and emission reporting. To identify opportunities and gains from projects that can add value for money or deliver the requirements in a more sustainable way. To assist the designers and engineers in achieving step change and looking to using sustainable materials in the design and construction. Capture best practice and produce case studies to share information and improve performance Engage with Procurement team to drive continuous improvement against HTUK objectives and client requirements Report on a monthly basis on project and business sustainability performance Identify opportunities to develop own skills and experience consistent with supporting projects and to continually challenge own practice and development to provide a high-quality support Skills and Experience: Good knowledge of sustainability issues in construction, through experience, training, education. Willing to undertake further training. Wiling to lead by example. Preferably Degree level qualified, must be working towards (or hold) ISEF membership at an appropriate level (or similar professional body). Must have a good understanding of the construction process, the desire to understand and work with engineers to find better sustainable solutions to issues within the established constraints. Good understanding of carbon reduction planning MB943: Sustainability Manager Location: Workington Salary: £60,000 + £5,750 Car Allowance Working Hours: Monday to Friday, 37.5 hours per week Additional Company Benefits: Exceptional Career Development Opportunities, Company Car/Car Allowance (Depending on job grade), Pension matched up to 8%, 25 days annual leave plus holiday (opportunity to buy/sell leave will be implemented from January 2026), Private medical insurance, Free 24/7 EAP
APPLE TECHNICAL RECRUITMENT (UK) LIMITED
St. Albans, Hertfordshire
Vacancy Summary Job Title: Senior Project Manager Job Type: Permanent Job Ref: Location: Hertfordshire Start Date: ASAP Salary: c 95k- 105k (DOE) + competitive benefits package inc car or allowance, healthcare, pension and performance bonus. Company & Project: An award winning Tier 1 Main Contractor with a busy project pipeline are seeking to recruit a Senior Project Manager to join their Construction Delivery team, working on a c 50m New Build project initially in the Pre-Construction stage, managing the PCSA throught on-site delivery. Our client is a well respected employer who have a healthy secured order book for 2026 onwards, including a number of projects valued at c 50m+. You will be expected to lead a c 50m project which contains a mixture of New Build and Refurbishment, joining prior to the project starting on site. The company is recognised for supporting their employees, with both internal promotion/career development, alongside advocating employee ideas and innovations. The business has a market leading benefits package Duties & Responsibilities: The successful candidate will take responsibility for managing all project management functions for the project, from planning, design and financial management, through to practical construction delivery of the project. Previous experience in managing projects 30m+ as No1 PM is essential, along with a strong working knowledge of both pre-construction project management, contract management, H&S, and exceptional client facing skills. Our client is looking for a candidate with a stable career history working for Top 100 Main Contractors on projects from concept to completion and with experience of managing teams of 20+. Desirable Experience: Previously held Number 1 Project Manager roles with recognised Top 100 Main Contractors. Experience working on PCSAs. Track record in delivering Construction projects 30m+ within any of the following sectors would be advantageous Science, Healthcare or Education. Ideally from a Site Management or Engineering background, including a valid CSCS Card and ideally NVQ Level 6, BSc or MCIOB. Exceptional client facing and people management skills, experience in leading teams of c20 staff, including solid technical knowledge of planning, design, commercial and construction delivery. Previous Roles: Senior Project Manager OR Project Manager OR Construction Manager OR Project Director OR Contracts Manager. Qualifications & Skills: Degree in Construction Management or comparable qualification - NVQ/HNC etc. MCIOB status would be advantageous. Application Process: If you would like more information on this Senior Project Manager position or any other vacancy please email your current CV through to Jess Quinn where it will be reviewed and you will be contacted within 48 hours if your CV is of interest. Services advertised by Apple Technical Recruitment are that of an Employment Agency/Business.
May 16, 2026
Full time
Vacancy Summary Job Title: Senior Project Manager Job Type: Permanent Job Ref: Location: Hertfordshire Start Date: ASAP Salary: c 95k- 105k (DOE) + competitive benefits package inc car or allowance, healthcare, pension and performance bonus. Company & Project: An award winning Tier 1 Main Contractor with a busy project pipeline are seeking to recruit a Senior Project Manager to join their Construction Delivery team, working on a c 50m New Build project initially in the Pre-Construction stage, managing the PCSA throught on-site delivery. Our client is a well respected employer who have a healthy secured order book for 2026 onwards, including a number of projects valued at c 50m+. You will be expected to lead a c 50m project which contains a mixture of New Build and Refurbishment, joining prior to the project starting on site. The company is recognised for supporting their employees, with both internal promotion/career development, alongside advocating employee ideas and innovations. The business has a market leading benefits package Duties & Responsibilities: The successful candidate will take responsibility for managing all project management functions for the project, from planning, design and financial management, through to practical construction delivery of the project. Previous experience in managing projects 30m+ as No1 PM is essential, along with a strong working knowledge of both pre-construction project management, contract management, H&S, and exceptional client facing skills. Our client is looking for a candidate with a stable career history working for Top 100 Main Contractors on projects from concept to completion and with experience of managing teams of 20+. Desirable Experience: Previously held Number 1 Project Manager roles with recognised Top 100 Main Contractors. Experience working on PCSAs. Track record in delivering Construction projects 30m+ within any of the following sectors would be advantageous Science, Healthcare or Education. Ideally from a Site Management or Engineering background, including a valid CSCS Card and ideally NVQ Level 6, BSc or MCIOB. Exceptional client facing and people management skills, experience in leading teams of c20 staff, including solid technical knowledge of planning, design, commercial and construction delivery. Previous Roles: Senior Project Manager OR Project Manager OR Construction Manager OR Project Director OR Contracts Manager. Qualifications & Skills: Degree in Construction Management or comparable qualification - NVQ/HNC etc. MCIOB status would be advantageous. Application Process: If you would like more information on this Senior Project Manager position or any other vacancy please email your current CV through to Jess Quinn where it will be reviewed and you will be contacted within 48 hours if your CV is of interest. Services advertised by Apple Technical Recruitment are that of an Employment Agency/Business.
Mobile Software Engineer iOS Up to 75k Bristol, Hybrid Swift, Objective-C Benefits: 35 days holiday including bank Buy and Sell holiday Health Insurance I am working with a highly respected SaaS client in Bristol who are looking for Mobile Software Engineer to join the team. The products they design are internationally recognised, and you will contribute to their continued performance and presence. You will focus on the design and development of iOS applications using Swift and Objective-C for the Apple store. You will work with a cross functional team. Ideally you should be an AI evangelist, excited about using AI to accelerate development, but with great foundational programming skills. Alongside solid development skills, you should be someone that enjoys speaking with stakeholders and comes across as approachable. Quality is of the utmost importance due to the nature of the industry, and if you would like to continue your career in an environment where best practise really is standard, then please apply today. Experience needed: Excellent communication skills Proven commercial experience leading complex iOS development and deployment Objective-C, Swift Frameworks including: UIKit, SwiftUI, Foundation Auto Layout Agile Development - with experience across the entire SDLC including testing CI/CD tools - ADO, Xcode cloud Rest APIs SQLite TestFlight This is an urgent vacancy, If you are interested then please apply quoting reference AR(phone number removed). Objective-C, Swift, Objective C, Swift Concurrency, SwiftUI, UIKit, Auto Layout, Xcode, Instruments, Apple iOS, iOS developer, iOS engineer, mobile developer, Git, Azure DevOps, GitHub, Azure Repos, SQLite, SQLite database, Testflight, Xcode cloud, App Store Connect, Jenkins, Rest API, RestAPI, JSON, Objective-C, Swift, Objective C, Swift Concurrency, SwiftUI, UIKit, Auto Layout, Xcode, Instruments, Apple iOS, iOS developer, iOS engineer, mobile developer, Git, Azure DevOps, GitHub, Azure Repos, SQLite, SQLite database, Testflight, Xcode cloud, App Store Connect, Jenkins, Rest API, RestAPI, JSON, Objective-C, Swift, Objective C, Swift Concurrency, SwiftUI, UIKit, Auto Layout, Xcode, Instruments, Apple iOS, iOS developer, iOS engineer, mobile developer, Git, Azure DevOps, GitHub, Azure Repos, SQLite, SQLite database, Testflight, Xcode cloud, App Store Connect, Jenkins, Rest API, RestAPI, JSON,Objective-C, Swift, Objective C, Swift Concurrency, SwiftUI, UIKit, Auto Layout, Xcode, Instruments, Apple iOS, iOS developer, iOS engineer, mobile developer, Git, Azure DevOps, GitHub, Azure Repos, SQLite, SQLite database, Testflight, Xcode cloud, App Store Connect, Jenkins, Rest API, RestAPI, JSON If you are interested in this position please click 'apply'. Hunter Selection Limited is a recruitment consultancy with offices UK wide, specialising in permanent & contract roles within Engineering & Manufacturing, IT & Digital, Science & Technology and Service & Sales sectors. Please note as we receive a high level of applications we can only respond to applicants whose skills & qualifications are suitable for this position. No terminology in this advert is intended to discriminate against any of the protected characteristics that fall under the Equality Act 2010. For the purposes of the Conduct Regulations 2003, when advertising permanent vacancies we are acting as an Employment Agency, and when advertising temporary/contract vacancies we are acting as an Employment Business.
May 16, 2026
Full time
Mobile Software Engineer iOS Up to 75k Bristol, Hybrid Swift, Objective-C Benefits: 35 days holiday including bank Buy and Sell holiday Health Insurance I am working with a highly respected SaaS client in Bristol who are looking for Mobile Software Engineer to join the team. The products they design are internationally recognised, and you will contribute to their continued performance and presence. You will focus on the design and development of iOS applications using Swift and Objective-C for the Apple store. You will work with a cross functional team. Ideally you should be an AI evangelist, excited about using AI to accelerate development, but with great foundational programming skills. Alongside solid development skills, you should be someone that enjoys speaking with stakeholders and comes across as approachable. Quality is of the utmost importance due to the nature of the industry, and if you would like to continue your career in an environment where best practise really is standard, then please apply today. Experience needed: Excellent communication skills Proven commercial experience leading complex iOS development and deployment Objective-C, Swift Frameworks including: UIKit, SwiftUI, Foundation Auto Layout Agile Development - with experience across the entire SDLC including testing CI/CD tools - ADO, Xcode cloud Rest APIs SQLite TestFlight This is an urgent vacancy, If you are interested then please apply quoting reference AR(phone number removed). Objective-C, Swift, Objective C, Swift Concurrency, SwiftUI, UIKit, Auto Layout, Xcode, Instruments, Apple iOS, iOS developer, iOS engineer, mobile developer, Git, Azure DevOps, GitHub, Azure Repos, SQLite, SQLite database, Testflight, Xcode cloud, App Store Connect, Jenkins, Rest API, RestAPI, JSON, Objective-C, Swift, Objective C, Swift Concurrency, SwiftUI, UIKit, Auto Layout, Xcode, Instruments, Apple iOS, iOS developer, iOS engineer, mobile developer, Git, Azure DevOps, GitHub, Azure Repos, SQLite, SQLite database, Testflight, Xcode cloud, App Store Connect, Jenkins, Rest API, RestAPI, JSON, Objective-C, Swift, Objective C, Swift Concurrency, SwiftUI, UIKit, Auto Layout, Xcode, Instruments, Apple iOS, iOS developer, iOS engineer, mobile developer, Git, Azure DevOps, GitHub, Azure Repos, SQLite, SQLite database, Testflight, Xcode cloud, App Store Connect, Jenkins, Rest API, RestAPI, JSON,Objective-C, Swift, Objective C, Swift Concurrency, SwiftUI, UIKit, Auto Layout, Xcode, Instruments, Apple iOS, iOS developer, iOS engineer, mobile developer, Git, Azure DevOps, GitHub, Azure Repos, SQLite, SQLite database, Testflight, Xcode cloud, App Store Connect, Jenkins, Rest API, RestAPI, JSON If you are interested in this position please click 'apply'. Hunter Selection Limited is a recruitment consultancy with offices UK wide, specialising in permanent & contract roles within Engineering & Manufacturing, IT & Digital, Science & Technology and Service & Sales sectors. Please note as we receive a high level of applications we can only respond to applicants whose skills & qualifications are suitable for this position. No terminology in this advert is intended to discriminate against any of the protected characteristics that fall under the Equality Act 2010. For the purposes of the Conduct Regulations 2003, when advertising permanent vacancies we are acting as an Employment Agency, and when advertising temporary/contract vacancies we are acting as an Employment Business.
We are currently seeking a Systems Engineer to join an innovative company that specialise in the defence and secure communications sector. This role offers the opportunity to support the delivery of advanced Cyber and Information Assurance solutions. You will play a key role shaping technical solutions, contributing across the full systems engineering lifecycle, and supporting multi-disciplinary product development that will address real-world operational challenges. Key Responsibilities Lead or contribute to systems engineering activities across cyber and Information Assurance (IA) development programmes Collaborate with cross-functional teams (hardware, software, FPGA, mechanical) to develop integrated technical solutions Define, manage, and maintain system requirements across all engineering disciplines Support the full system lifecycle from concept through development, integration, and verification Work closely with project leadership to ensure delivery against time, cost, quality, and performance objectives Provide technical input into bid and proposal activities Engage with stakeholders to clarify requirements and ensure solutions meet end-user needs Produce clear, high-quality technical documentation Ensure alignment and coherence across all technical areas Skills & Experience Required Experience working across the systems engineering lifecycle (requirements, design, integration, V&V) Strong understanding of multi-disciplinary engineering environments, with expertise in at least one area (e.g. software, electronics, FPGA) Experience with requirements management tools (e.g. DOORS or similar) Ability to apply system-level thinking to complex technical challenges Familiarity with systems modelling approaches (e.g. UML, SysML, use cases, trade studies) Strong documentation and communication skills Degree qualified in a relevant engineering or technical discipline (or equivalent experience) Eligibility to obtain UK Security Clearance (SC) Desirable Experience Experience supporting technical bids and proposals Knowledge of environmental and mechanical qualification processes Comfortable working in complex, fast-paced environments with competing priorities Strong problem-solving ability and attention to detail What's on Offer Opportunity to work on cutting-edge secure and defence-related technologies Exposure to end-to-end product development across advanced systems Career development and progression opportunities Collaborative and supportive team environment Competitive salary and benefits package Apply Now If you're a Systems Engineer, or an engineer looking to broaden into a systems-focused role, this is a great opportunity to work on impactful and technically challenging programmes.
May 16, 2026
Full time
We are currently seeking a Systems Engineer to join an innovative company that specialise in the defence and secure communications sector. This role offers the opportunity to support the delivery of advanced Cyber and Information Assurance solutions. You will play a key role shaping technical solutions, contributing across the full systems engineering lifecycle, and supporting multi-disciplinary product development that will address real-world operational challenges. Key Responsibilities Lead or contribute to systems engineering activities across cyber and Information Assurance (IA) development programmes Collaborate with cross-functional teams (hardware, software, FPGA, mechanical) to develop integrated technical solutions Define, manage, and maintain system requirements across all engineering disciplines Support the full system lifecycle from concept through development, integration, and verification Work closely with project leadership to ensure delivery against time, cost, quality, and performance objectives Provide technical input into bid and proposal activities Engage with stakeholders to clarify requirements and ensure solutions meet end-user needs Produce clear, high-quality technical documentation Ensure alignment and coherence across all technical areas Skills & Experience Required Experience working across the systems engineering lifecycle (requirements, design, integration, V&V) Strong understanding of multi-disciplinary engineering environments, with expertise in at least one area (e.g. software, electronics, FPGA) Experience with requirements management tools (e.g. DOORS or similar) Ability to apply system-level thinking to complex technical challenges Familiarity with systems modelling approaches (e.g. UML, SysML, use cases, trade studies) Strong documentation and communication skills Degree qualified in a relevant engineering or technical discipline (or equivalent experience) Eligibility to obtain UK Security Clearance (SC) Desirable Experience Experience supporting technical bids and proposals Knowledge of environmental and mechanical qualification processes Comfortable working in complex, fast-paced environments with competing priorities Strong problem-solving ability and attention to detail What's on Offer Opportunity to work on cutting-edge secure and defence-related technologies Exposure to end-to-end product development across advanced systems Career development and progression opportunities Collaborative and supportive team environment Competitive salary and benefits package Apply Now If you're a Systems Engineer, or an engineer looking to broaden into a systems-focused role, this is a great opportunity to work on impactful and technically challenging programmes.
With over 50 years of heritage, this leading UK manufacturer has established itself as a global force within its industry. Renowned for quality and innovation, the company specialises in the design, development and manufacture of household products that enhance everyday living. Continuously evolving, they are at the forefront of integrating smart technology and automation into their product range, ensuring they remain ahead in a competitive market. Competitive salary, 10% Pension, 33 days holiday, 4x Life Assurance subsidised canteen, various health benefits 40 hours per week - 08:00 to 17:00, Monday to Friday. This is a varied and hands-on position focused on the continuous improvement of existing products, alongside the development of new designs from concept through to full production. You will play a key role in enhancing current product lines while delivering innovative solutions for the market. You will be involved across the full product lifecycle, including conceptual design, prototyping, testing, pre-production and final component approval. As a Product Design Engineer your duties will include: Designing and developing new and existing products using the Autodesk Inventor Product Design suite in a 3D environment Carrying out analysis activities such as FEA and Moldflow Prototyping and testing new concepts Collaborating with internal teams to produce manufacturing and installation documentation Creating high-quality renders and visuals for catalogues and promotional materials To be successful in the role of Product Design Engineer, the ideal candidate will: Hold a degree in Product Design (or have equivalent industry experience) Have experience with injection moulded part design Possess a strong understanding of drafting standards and GD&T You will be a proactive and team-oriented individual with a hands-on approach and a genuine drive to improve both products and processes. A willingness to learn, develop new skills and contribute meaningful results to the business is essential. With continued success, the company offers long-term stability, security and opportunities for professional growth. If this sounds like the right opportunity for you, apply today. ASC Connections Ltd acts as an employment business for temporary positions and an employment agency for permanent positions. We are committed to equal opportunity and diversity.
May 16, 2026
Full time
With over 50 years of heritage, this leading UK manufacturer has established itself as a global force within its industry. Renowned for quality and innovation, the company specialises in the design, development and manufacture of household products that enhance everyday living. Continuously evolving, they are at the forefront of integrating smart technology and automation into their product range, ensuring they remain ahead in a competitive market. Competitive salary, 10% Pension, 33 days holiday, 4x Life Assurance subsidised canteen, various health benefits 40 hours per week - 08:00 to 17:00, Monday to Friday. This is a varied and hands-on position focused on the continuous improvement of existing products, alongside the development of new designs from concept through to full production. You will play a key role in enhancing current product lines while delivering innovative solutions for the market. You will be involved across the full product lifecycle, including conceptual design, prototyping, testing, pre-production and final component approval. As a Product Design Engineer your duties will include: Designing and developing new and existing products using the Autodesk Inventor Product Design suite in a 3D environment Carrying out analysis activities such as FEA and Moldflow Prototyping and testing new concepts Collaborating with internal teams to produce manufacturing and installation documentation Creating high-quality renders and visuals for catalogues and promotional materials To be successful in the role of Product Design Engineer, the ideal candidate will: Hold a degree in Product Design (or have equivalent industry experience) Have experience with injection moulded part design Possess a strong understanding of drafting standards and GD&T You will be a proactive and team-oriented individual with a hands-on approach and a genuine drive to improve both products and processes. A willingness to learn, develop new skills and contribute meaningful results to the business is essential. With continued success, the company offers long-term stability, security and opportunities for professional growth. If this sounds like the right opportunity for you, apply today. ASC Connections Ltd acts as an employment business for temporary positions and an employment agency for permanent positions. We are committed to equal opportunity and diversity.
Principal Systems Engineer(Software/Simulation) Portsmouth-Broad Oak Up to 75k% Bonus My client a multinational Aerospace & Defence organisation are looking for a Principal Systems Engineer to join their team working on a hybrid basis. You will join the clients Simulation and Training sector at Broad Oak Works Portsmouth, part of the Maritime and Land Defence Solutions business, working on the MIMESIS product. As a System Technical Lead within the MIMESIS team, you will have technical responsibility for the design and development of new modules/content for the product, reviewing and approving lower level documentation. You will also provide technical guidance to the engineering team, working closely with System Design Authority, to develop and support MIMESIS for their customers. What you'll be doing: Provide hands-on technical leadership with a team of systems and software engineers, and directly support the product System Design Authority Apply the principles of Systems Engineering to develop software-based Simulation Systems across the full engineering lifecycle Undertake Simulation Systems equipment design, network design and software design Lead requirement decomposition and manage specifications using tools like IBM DOORS Next Direct architectural modelling and interface definitions in tools such as CATIA Magic (Cameo) Drive system integration and define acceptance strategies for software-based systems Lead technical reviews and ensure compliance with customer, legislative & business requirements Your skills and experiences: Demonstrable experience of the application of Systems Engineering for software-based products Model Based Systems Engineering(MBSE) - (Highly desirable) Expertise in Systems Engineering and Software integration lifecycle principles (ISO 15288 and 12207) Strong background in requirements management (e.g., IBM DOORS Next - desirable) Familiarity with engineering lifecycle models (Waterfall & Agile) and tools (e.g. JIRA) Background in software development and integration Technical leadership and ability to guide teams across disciplines to shape design solutions Ideally from a Defence background To apply for this role please forward your CV to Peter Bibby on the email address below
May 16, 2026
Full time
Principal Systems Engineer(Software/Simulation) Portsmouth-Broad Oak Up to 75k% Bonus My client a multinational Aerospace & Defence organisation are looking for a Principal Systems Engineer to join their team working on a hybrid basis. You will join the clients Simulation and Training sector at Broad Oak Works Portsmouth, part of the Maritime and Land Defence Solutions business, working on the MIMESIS product. As a System Technical Lead within the MIMESIS team, you will have technical responsibility for the design and development of new modules/content for the product, reviewing and approving lower level documentation. You will also provide technical guidance to the engineering team, working closely with System Design Authority, to develop and support MIMESIS for their customers. What you'll be doing: Provide hands-on technical leadership with a team of systems and software engineers, and directly support the product System Design Authority Apply the principles of Systems Engineering to develop software-based Simulation Systems across the full engineering lifecycle Undertake Simulation Systems equipment design, network design and software design Lead requirement decomposition and manage specifications using tools like IBM DOORS Next Direct architectural modelling and interface definitions in tools such as CATIA Magic (Cameo) Drive system integration and define acceptance strategies for software-based systems Lead technical reviews and ensure compliance with customer, legislative & business requirements Your skills and experiences: Demonstrable experience of the application of Systems Engineering for software-based products Model Based Systems Engineering(MBSE) - (Highly desirable) Expertise in Systems Engineering and Software integration lifecycle principles (ISO 15288 and 12207) Strong background in requirements management (e.g., IBM DOORS Next - desirable) Familiarity with engineering lifecycle models (Waterfall & Agile) and tools (e.g. JIRA) Background in software development and integration Technical leadership and ability to guide teams across disciplines to shape design solutions Ideally from a Defence background To apply for this role please forward your CV to Peter Bibby on the email address below
Vehicle Integration Leader £33.99/hr umbrella rate Do you have proven expertise in automotive technology, with in-depth knowledge of vehicle, system, and component design and development Are you ready to take your career to the next level? This is an exciting opportunity to join a forward-thinking company at the cutting edge of the automotive industry as a Vehicle Integration Leader. You'll be at the heart of innovation, driving the development of new and existing vehicle architectures and shaping the future of mobility. With a focus on collaboration and technical excellence, this role offers the chance to work on ground breaking projects in a dynamic and supportive environment. What You Will Do: - Lead the integration and delivery of engineering for the entire vehicle, ensuring compatibility with strategic targets and delivering functional excellence. - Collaborate with cross-functional teams to drive technical solutions, resolve obstacles, and ensure smooth progression of vehicle technical data. - Act as a technical arbitrator, embedding design quality and driving the delivery of service and manufacturing requirements. - Oversee the delivery of Minimum Viable Product into virtual and physical verification stages, ensuring alignment with programme goals. - Support complex engineering problem-solving activities, leveraging structured approaches such as Agile and Six Sigma methodologies. What You Will Bring: - Proven expertise in automotive technology, with in-depth knowledge of vehicle, system, and component design and development. - Strong leadership and management skills, with the ability to motivate and guide teams to solve complex technical challenges. - Exceptional communication, influencing, and negotiation skills to build credibility and trust across stakeholders. - Experience in project management, delivering against a complex set of programme technical deliverables. - A customer-first mindset with a passion for delivering personalised, transparent, and dependable experiences. As a Vehicle Integration Leader, you'll play a pivotal role in driving innovation and excellence, contributing to the company's mission of delivering cutting-edge automotive solutions. This is your chance to be part of a team that values progressive thinking and embraces Agile principles to achieve remarkable results. Location: This role is based in Gaydon, a hub of automotive innovation and excellence. Interested?: Don't miss the chance to be a key player in shaping the future of automotive engineering. Apply now to become a Vehicle Integration Leader and drive your career forward! This role is Inside IR35. Your CV will be forwarded to Jonathan Lee Recruitment, a leading engineering and manufacturing recruitment consultancy established in 1978. The services advertised by Jonathan Lee Recruitment are those of an Employment Agency.In order for your CV to be processed effectively, please ensure your name, email address, phone number and location (post code OR town OR county, as a minimum) are included.
May 16, 2026
Contractor
Vehicle Integration Leader £33.99/hr umbrella rate Do you have proven expertise in automotive technology, with in-depth knowledge of vehicle, system, and component design and development Are you ready to take your career to the next level? This is an exciting opportunity to join a forward-thinking company at the cutting edge of the automotive industry as a Vehicle Integration Leader. You'll be at the heart of innovation, driving the development of new and existing vehicle architectures and shaping the future of mobility. With a focus on collaboration and technical excellence, this role offers the chance to work on ground breaking projects in a dynamic and supportive environment. What You Will Do: - Lead the integration and delivery of engineering for the entire vehicle, ensuring compatibility with strategic targets and delivering functional excellence. - Collaborate with cross-functional teams to drive technical solutions, resolve obstacles, and ensure smooth progression of vehicle technical data. - Act as a technical arbitrator, embedding design quality and driving the delivery of service and manufacturing requirements. - Oversee the delivery of Minimum Viable Product into virtual and physical verification stages, ensuring alignment with programme goals. - Support complex engineering problem-solving activities, leveraging structured approaches such as Agile and Six Sigma methodologies. What You Will Bring: - Proven expertise in automotive technology, with in-depth knowledge of vehicle, system, and component design and development. - Strong leadership and management skills, with the ability to motivate and guide teams to solve complex technical challenges. - Exceptional communication, influencing, and negotiation skills to build credibility and trust across stakeholders. - Experience in project management, delivering against a complex set of programme technical deliverables. - A customer-first mindset with a passion for delivering personalised, transparent, and dependable experiences. As a Vehicle Integration Leader, you'll play a pivotal role in driving innovation and excellence, contributing to the company's mission of delivering cutting-edge automotive solutions. This is your chance to be part of a team that values progressive thinking and embraces Agile principles to achieve remarkable results. Location: This role is based in Gaydon, a hub of automotive innovation and excellence. Interested?: Don't miss the chance to be a key player in shaping the future of automotive engineering. Apply now to become a Vehicle Integration Leader and drive your career forward! This role is Inside IR35. Your CV will be forwarded to Jonathan Lee Recruitment, a leading engineering and manufacturing recruitment consultancy established in 1978. The services advertised by Jonathan Lee Recruitment are those of an Employment Agency.In order for your CV to be processed effectively, please ensure your name, email address, phone number and location (post code OR town OR county, as a minimum) are included.
Sprinkler Design Engineer Waltham Cross Sector Experience: Fire Protection Salary: 50,000 to 70,000 The Client They are a leading provider of innovative fire protection, specializing in the design, installation, and maintenance of advanced fire detection and suppression systems. With a commitment to safeguarding lives and property, the company delivers tailored, high-quality services across various sectors, ensuring compliance with stringent safety standards. Their expert team leverages cutting-edge technology to offer reliable, efficient, and discreet fire protection solutions that blend seamlessly into any environment. The Sprinkler Design Engineer ensures designs are produced to a high quality, are compliant with the relevant standards and meet necessary timescales, while maintaining a professional relationship with clients, team members and sub-contractors. If you currently sit as a Fire Sprinkler Designer, Fire Protection Design Engineer, Fire Systems Engineer or a Fire Suppression Designer please apply Responsibilities Production and design responsibility of fire protection sprinkler system installation drawings and coordination models. Production of hydraulic calculations. Onsite surveying, where necessary. Attend coordination meetings within the wider clients' task team. Carry out checks to ensure designs are complaint to the relevant standards and project specifications. Mentor junior members of the design department. Essential Experience Minimum of 5 Years experience in the design of fire protection sprinkler systems. Must be experienced in producing technical drawings in AutoCAD and Revit sheets. Experience in the production of the hydraulic calculations using the Canute FHC design software. Qualifications Knowledge of LPC Sprinkler Rules is essential. Minimum of LCPB Basic Design Qualification. LPCB Intermediate and FHC Design Qualifications would be advantageous. Knowledge of FM and NFPA standards would be advantageous If you currently sit as a Fire Sprinkler Designer, Fire Protection Design Engineer, Fire Systems Engineer or a Fire Suppression Designer please apply For information on the role please call Giles Churchill - Director - Fire at Amida Solutions on (phone number removed). I am available to book calls in from 8am to 8pm Mon to Fri & Weekends.
May 16, 2026
Full time
Sprinkler Design Engineer Waltham Cross Sector Experience: Fire Protection Salary: 50,000 to 70,000 The Client They are a leading provider of innovative fire protection, specializing in the design, installation, and maintenance of advanced fire detection and suppression systems. With a commitment to safeguarding lives and property, the company delivers tailored, high-quality services across various sectors, ensuring compliance with stringent safety standards. Their expert team leverages cutting-edge technology to offer reliable, efficient, and discreet fire protection solutions that blend seamlessly into any environment. The Sprinkler Design Engineer ensures designs are produced to a high quality, are compliant with the relevant standards and meet necessary timescales, while maintaining a professional relationship with clients, team members and sub-contractors. If you currently sit as a Fire Sprinkler Designer, Fire Protection Design Engineer, Fire Systems Engineer or a Fire Suppression Designer please apply Responsibilities Production and design responsibility of fire protection sprinkler system installation drawings and coordination models. Production of hydraulic calculations. Onsite surveying, where necessary. Attend coordination meetings within the wider clients' task team. Carry out checks to ensure designs are complaint to the relevant standards and project specifications. Mentor junior members of the design department. Essential Experience Minimum of 5 Years experience in the design of fire protection sprinkler systems. Must be experienced in producing technical drawings in AutoCAD and Revit sheets. Experience in the production of the hydraulic calculations using the Canute FHC design software. Qualifications Knowledge of LPC Sprinkler Rules is essential. Minimum of LCPB Basic Design Qualification. LPCB Intermediate and FHC Design Qualifications would be advantageous. Knowledge of FM and NFPA standards would be advantageous If you currently sit as a Fire Sprinkler Designer, Fire Protection Design Engineer, Fire Systems Engineer or a Fire Suppression Designer please apply For information on the role please call Giles Churchill - Director - Fire at Amida Solutions on (phone number removed). I am available to book calls in from 8am to 8pm Mon to Fri & Weekends.
We're looking for a Principal Product Manager who operates as an enterprise level problem solver: someone who can set a multi year vision, orchestrate complex cross functional work, and influence strategy across products, customers, and partners. You'll own a critical product domain that cuts across teams and capabilities within a platform used by some of the biggest enterprises on the planet. This is not a feature factory. You will be expected to make hard trade offs, say no as much as you say yes, and base every bet in evidence. Responsibilities Own and scale a cross cutting product domain. Define and continuously refine the multi quarter and multi year strategy for a product area that spans multiple teams and surfaces, ensuring it ladders up to company and portfolio strategy-not just a single feature set. Set direction through outcomes, not output. Establish clear, measurable product outcomes; translate them into coherent roadmaps; and make deliberate trade offs that balance short term wins with long term strategic bets. Drive complex cross functional execution. Lead cross team initiatives that require coordination across product, engineering, design, data/AI, GTM, customer facing teams, and partners. Anticipate and remove systemic blockers, resolve conflicts, and ensure we ship high quality, high impact releases on schedule. Act as a thought partner to senior leadership. Synthesize customer, market, competitive, and internal data into crisp narratives and recommendations that influence portfolio and business strategy. Lead strategy documents, investment cases, and executive reviews for your domain. Be deeply data driven at scale. Define and instrument success metrics for your domain, design experiments, and use quantitative and qualitative signals to make decisions, validate hypotheses, and iterate. Model best practices in how we use data to steer product direction. Design for AI and build AI native experiences. Identify and prioritize where AI and agentic capabilities create disproportionate value for our industrial users. Partner closely with engineering and AI teams to shape use cases, UX, and guardrails. Use AI tools proactively in your own discovery, analysis, and execution. Lead through ambiguity. Take ownership of problem spaces where the market signal is incomplete, constraints are evolving, or the solution requires structured experimentation. Bring structure, frameworks, and focus to ambiguous domains and help others navigate them. Be the trusted voice of the customer and the field. Build deep relationships with strategic customers, partners, and field teams. Regularly engage in discovery, design partner programs, and high stakes customer conversations. Use these insights to challenge assumptions and refine strategy. Raise the bar for product quality and UX. Champion simplicity, usability, and technical soundness. Collaborate tightly with design and engineering to ensure we ship experiences that are robust, scalable, and delightful for industrial users. Mentor and elevate other product managers. Coach PMs across the team on craft, frameworks, and decision making. Share best practices, review their work, and help shape and continuously improve product management standards and rituals at Seeq. Qualifications Proven Principal level impact in B2B SaaS. 7+ years of product management experience (or equivalent), including substantial time operating at Senior or Principal PM level on complex products or platforms. Track record owning strategy for complex domains. Demonstrated experience defining and executing multi quarter roadmaps for cross cutting or platform capabilities (e.g., data, analytics, workflow, AI/ML, or developer/platform surfaces). Enterprise and ecosystem mindset. Experience building products for enterprise customers-ideally in data, analytics, industrial software, or adjacent domains-balancing user needs, technical constraints, security, and commercial realities. Exceptional influence and communication skills. Ability to frame problems, tell compelling product stories, and influence executive stakeholders, peers, and cross functional partners across time zones and functions. Strong analytical and experimentation skills. Comfortable with metrics, experimentation, and instrumentation at scale. You can move seamlessly between qualitative discovery and quantitative decision making. AI fluency. Experience defining and shipping AI powered product capabilities and/or demonstrated ability to quickly come up the learning curve on AI native workflows, agentic patterns, and their implications for users. Leadership without formal authority. Demonstrated ability to mentor PMs and cross functional partners, lead large initiatives, and elevate the overall quality of product thinking and execution across a team or organization. Domain familiarity (nice to have). Experience with industrial operations, time series data, OT/IT environments, or process manufacturing is a plus, but not required if you have a strong track record quickly learning complex technical domains. Benefits Competitive salary plus bonus incentives Benefits: 12 week paid Seeq family leave Unlimited PTO Internet and mobile phone reimbursements Medical benefits Group term life insurance Short term and long term disability insurance pre tax benefits Voluntary vision and dental (ortho) Vacation bonus program Employee Assistance Program Generous home office allowance The best co workers (we've analyzed the data, so we know it's true.) Pet friendly workspace (your dog will be so happy to have you home) You love your job! Seeq provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, national origin, age, disability, or genetics. You must be authorized to work in the country in which you reside. Seeq does not sponsor US F1 or H 1B work visas.
May 16, 2026
Full time
We're looking for a Principal Product Manager who operates as an enterprise level problem solver: someone who can set a multi year vision, orchestrate complex cross functional work, and influence strategy across products, customers, and partners. You'll own a critical product domain that cuts across teams and capabilities within a platform used by some of the biggest enterprises on the planet. This is not a feature factory. You will be expected to make hard trade offs, say no as much as you say yes, and base every bet in evidence. Responsibilities Own and scale a cross cutting product domain. Define and continuously refine the multi quarter and multi year strategy for a product area that spans multiple teams and surfaces, ensuring it ladders up to company and portfolio strategy-not just a single feature set. Set direction through outcomes, not output. Establish clear, measurable product outcomes; translate them into coherent roadmaps; and make deliberate trade offs that balance short term wins with long term strategic bets. Drive complex cross functional execution. Lead cross team initiatives that require coordination across product, engineering, design, data/AI, GTM, customer facing teams, and partners. Anticipate and remove systemic blockers, resolve conflicts, and ensure we ship high quality, high impact releases on schedule. Act as a thought partner to senior leadership. Synthesize customer, market, competitive, and internal data into crisp narratives and recommendations that influence portfolio and business strategy. Lead strategy documents, investment cases, and executive reviews for your domain. Be deeply data driven at scale. Define and instrument success metrics for your domain, design experiments, and use quantitative and qualitative signals to make decisions, validate hypotheses, and iterate. Model best practices in how we use data to steer product direction. Design for AI and build AI native experiences. Identify and prioritize where AI and agentic capabilities create disproportionate value for our industrial users. Partner closely with engineering and AI teams to shape use cases, UX, and guardrails. Use AI tools proactively in your own discovery, analysis, and execution. Lead through ambiguity. Take ownership of problem spaces where the market signal is incomplete, constraints are evolving, or the solution requires structured experimentation. Bring structure, frameworks, and focus to ambiguous domains and help others navigate them. Be the trusted voice of the customer and the field. Build deep relationships with strategic customers, partners, and field teams. Regularly engage in discovery, design partner programs, and high stakes customer conversations. Use these insights to challenge assumptions and refine strategy. Raise the bar for product quality and UX. Champion simplicity, usability, and technical soundness. Collaborate tightly with design and engineering to ensure we ship experiences that are robust, scalable, and delightful for industrial users. Mentor and elevate other product managers. Coach PMs across the team on craft, frameworks, and decision making. Share best practices, review their work, and help shape and continuously improve product management standards and rituals at Seeq. Qualifications Proven Principal level impact in B2B SaaS. 7+ years of product management experience (or equivalent), including substantial time operating at Senior or Principal PM level on complex products or platforms. Track record owning strategy for complex domains. Demonstrated experience defining and executing multi quarter roadmaps for cross cutting or platform capabilities (e.g., data, analytics, workflow, AI/ML, or developer/platform surfaces). Enterprise and ecosystem mindset. Experience building products for enterprise customers-ideally in data, analytics, industrial software, or adjacent domains-balancing user needs, technical constraints, security, and commercial realities. Exceptional influence and communication skills. Ability to frame problems, tell compelling product stories, and influence executive stakeholders, peers, and cross functional partners across time zones and functions. Strong analytical and experimentation skills. Comfortable with metrics, experimentation, and instrumentation at scale. You can move seamlessly between qualitative discovery and quantitative decision making. AI fluency. Experience defining and shipping AI powered product capabilities and/or demonstrated ability to quickly come up the learning curve on AI native workflows, agentic patterns, and their implications for users. Leadership without formal authority. Demonstrated ability to mentor PMs and cross functional partners, lead large initiatives, and elevate the overall quality of product thinking and execution across a team or organization. Domain familiarity (nice to have). Experience with industrial operations, time series data, OT/IT environments, or process manufacturing is a plus, but not required if you have a strong track record quickly learning complex technical domains. Benefits Competitive salary plus bonus incentives Benefits: 12 week paid Seeq family leave Unlimited PTO Internet and mobile phone reimbursements Medical benefits Group term life insurance Short term and long term disability insurance pre tax benefits Voluntary vision and dental (ortho) Vacation bonus program Employee Assistance Program Generous home office allowance The best co workers (we've analyzed the data, so we know it's true.) Pet friendly workspace (your dog will be so happy to have you home) You love your job! Seeq provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, national origin, age, disability, or genetics. You must be authorized to work in the country in which you reside. Seeq does not sponsor US F1 or H 1B work visas.
Building & Construction Project Leader Location: Broughton (onsite) Contract: Contract role IR35: Inside Hours: 35 hours per week (4.5 days, between 7am-7pm) Rate: £31.40 per hour (PAYE) £42.00 per hour (Umbrella) Clearance: BPSS+ (completed by Airbus Security) Interview Process: One-stage interview About the role We are working with Airbus to recruit an experienced Building & Construction Project Leader to support a growing portfolio of capital investment (CAPEX) projects at their Broughton site.In this role, you'll take ownership of projects from initial feasibility through design, delivery, and final handover , leading multi-functional teams and ensuring all work is delivered safely, compliantly, and to a high technical standard. This is a hands-on leadership role, ideal for someone with strong client-side construction and project management experience within complex operational environments. What you'll be doing Setting up and leading CAPEX building and construction projects from inception to completion Managing multi-functional project teams , including internal stakeholders and external professional services Leading the detailed design of building services , including major plant replacement and refurbishment works Developing and managing project delivery plans , risks, and opportunities Preparing and managing CAPEX business cases , from approval through to project close Overseeing professional service work packages and monitoring on-site installation works Ensuring full compliance with Airbus procedures , technical standards, and health & safety requirements Producing and presenting project documentation, reports, specifications, and cost information Building and maintaining strong working relationships with clients, architects, designers, and contractors What we're looking for Proven experience delivering capital investment construction projects , ideally in a senior project management role Strong background in building and construction , with experience on the client side Demonstrable experience taking projects from feasibility through design, site delivery, and handover Practical understanding of mechanical and electrical building services , including operation and maintenance Experience leading multi-disciplinary teams , including external consultants and contractors Ability to translate client briefs into clear construction scopes and design requirements Confident communicator, able to engage effectively with a wide range of stakeholders ONC / HNC (or equivalent) in a building engineering services or design-related discipline (experience is prioritised over qualifications) Professional membership (e.g. CIBSE, IMechE, IET) is advantageous Competent using IT tools to produce reports, technical analysis, and project documentation (SharePoint / MS Project / G-Suite experience preferred) Why join through Guidant Global? At Guidant Global , we connect great people with meaningful opportunities across some of the UK's most advanced engineering and manufacturing environments. You'll benefit from: Access to high-profile projects within a globally recognised organisation A supportive recruitment partner focused on clear communication and candidate experience Competitive pay options and transparent contract arrangements The opportunity to apply your expertise in a role with real impact and visibility Ready to apply? If you're an experienced construction or building services project leader looking for your next contract opportunity in a complex, high-standards environment, we'd love to hear from you.Apply today via Guidant Global and take the next step in your project leadership career. Guidant, Carbon60, Lorien & SRG - The Impellam Group Portfolio are acting as an Employment Business in relation to this vacancy.
May 16, 2026
Contractor
Building & Construction Project Leader Location: Broughton (onsite) Contract: Contract role IR35: Inside Hours: 35 hours per week (4.5 days, between 7am-7pm) Rate: £31.40 per hour (PAYE) £42.00 per hour (Umbrella) Clearance: BPSS+ (completed by Airbus Security) Interview Process: One-stage interview About the role We are working with Airbus to recruit an experienced Building & Construction Project Leader to support a growing portfolio of capital investment (CAPEX) projects at their Broughton site.In this role, you'll take ownership of projects from initial feasibility through design, delivery, and final handover , leading multi-functional teams and ensuring all work is delivered safely, compliantly, and to a high technical standard. This is a hands-on leadership role, ideal for someone with strong client-side construction and project management experience within complex operational environments. What you'll be doing Setting up and leading CAPEX building and construction projects from inception to completion Managing multi-functional project teams , including internal stakeholders and external professional services Leading the detailed design of building services , including major plant replacement and refurbishment works Developing and managing project delivery plans , risks, and opportunities Preparing and managing CAPEX business cases , from approval through to project close Overseeing professional service work packages and monitoring on-site installation works Ensuring full compliance with Airbus procedures , technical standards, and health & safety requirements Producing and presenting project documentation, reports, specifications, and cost information Building and maintaining strong working relationships with clients, architects, designers, and contractors What we're looking for Proven experience delivering capital investment construction projects , ideally in a senior project management role Strong background in building and construction , with experience on the client side Demonstrable experience taking projects from feasibility through design, site delivery, and handover Practical understanding of mechanical and electrical building services , including operation and maintenance Experience leading multi-disciplinary teams , including external consultants and contractors Ability to translate client briefs into clear construction scopes and design requirements Confident communicator, able to engage effectively with a wide range of stakeholders ONC / HNC (or equivalent) in a building engineering services or design-related discipline (experience is prioritised over qualifications) Professional membership (e.g. CIBSE, IMechE, IET) is advantageous Competent using IT tools to produce reports, technical analysis, and project documentation (SharePoint / MS Project / G-Suite experience preferred) Why join through Guidant Global? At Guidant Global , we connect great people with meaningful opportunities across some of the UK's most advanced engineering and manufacturing environments. You'll benefit from: Access to high-profile projects within a globally recognised organisation A supportive recruitment partner focused on clear communication and candidate experience Competitive pay options and transparent contract arrangements The opportunity to apply your expertise in a role with real impact and visibility Ready to apply? If you're an experienced construction or building services project leader looking for your next contract opportunity in a complex, high-standards environment, we'd love to hear from you.Apply today via Guidant Global and take the next step in your project leadership career. Guidant, Carbon60, Lorien & SRG - The Impellam Group Portfolio are acting as an Employment Business in relation to this vacancy.
Airco Refrigeration and Air Conditioning Ltd
Swindon, Wiltshire
A bit about us Founded in 1991 as a sole trade; and fast forward to today, Airco stands as a leading HVAC & Renewables contractor, directly employing more than 200 staff. Proud of our roots in Hull, the business has expanded to provide a now largely national service offering. Originally, the business predominantly operated as a refrigeration contractor; the business has grown into offering multiple disciplines including air conditioning, ventilation, heating, plumbing and renewables. We provide full service, maintenance, repair, design and installation services for this entire scope to ensure our clients can rely on us for turn key solutions within the industry, including 24/7 365 availability for critical breakdowns. What are we looking for We currently have a fantastic opportunity for a Service Engineer, responsible for ensuring the efficient operation of air conditioning systems through installation, maintenance, repair, and troubleshooting. This role requires technical expertise in HVACR (Heating, Ventilation, Air Conditioning and Refrigeration) systems and the ability to work independently or as part of a team to deliver high-quality service to clients. You will be part of a team of Engineers who support Airco in providing a service to our growing and highly prestigious client base in the Swindon and surrounding areas. The role will be very varied from carrying out planned and preventative maintenance to responding to service calls. Location : Swindon Salary: Upto £22 per hour - dependent on Experience Benefits: Enhanced Holidays, Birthday day off, Long service awards, Enhanced sick pay, Bike to work scheme, referral scheme, Home support and Health cash plans. What will you do . Effectively diagnose, identify faults and failures with equipment and systems, providing effective solutions Where possible provide a first time fix response Carry out routine planned preventative maintenance Coordinate and control all documents associated with reactive & planned preventative maintenance works Liaise closely with the client (Domestic & Commercial clients) to maintain excellent stakeholder relationships Work in a safe and controlled manor following all necessary internal health & safety processes and client specific site requirements Take part in the on-call rota to support the business achieve its 24/7/365 response Who are we looking for . A highly experienced Refrigeration & Air conditioning engineer, with a minimum NVQ Level 2 qualification in Refrigeration & Air conditioning, you will be F-Gas/EN 378 compliant An individual with hands-on experience working with VRV systems, cold rooms, close control units, chilled water systems, and heat pumps. You will be used to working unsupervised A high level of interpersonal skills, you will have strong networking skills, building strong stakeholder relationships at a variety of levels with our wide range of clients You will be confident in your own ability Strong problem solving skills, you will have a "can do" attitude Ideally you will have good electrical competence including the ability to read wiring schematics and test control circuits Full Driving licence Please note you must be able to achieve a DBS certificate What will you get in return . The Package Competitive salary Paid Door to Door £90 call out payment iPad and phone Transit/Vivaro/Proace van Training and Continuous Professional Development Opportunities to progress within the business Regular overtime available Job Type: Full-time Pay: Up to £22.00 per hour Benefits: Additional leave Bereavement leave Company car Cycle to work scheme Enhanced maternity leave Enhanced paternity leave On-site parking Paid volunteer time Referral programme Sabbatical Sick pay Experience: Air conditioning & Refrigeration : 3 years (required) Licence/Certification: Driving Licence (required) Work Location: On the road
May 16, 2026
Full time
A bit about us Founded in 1991 as a sole trade; and fast forward to today, Airco stands as a leading HVAC & Renewables contractor, directly employing more than 200 staff. Proud of our roots in Hull, the business has expanded to provide a now largely national service offering. Originally, the business predominantly operated as a refrigeration contractor; the business has grown into offering multiple disciplines including air conditioning, ventilation, heating, plumbing and renewables. We provide full service, maintenance, repair, design and installation services for this entire scope to ensure our clients can rely on us for turn key solutions within the industry, including 24/7 365 availability for critical breakdowns. What are we looking for We currently have a fantastic opportunity for a Service Engineer, responsible for ensuring the efficient operation of air conditioning systems through installation, maintenance, repair, and troubleshooting. This role requires technical expertise in HVACR (Heating, Ventilation, Air Conditioning and Refrigeration) systems and the ability to work independently or as part of a team to deliver high-quality service to clients. You will be part of a team of Engineers who support Airco in providing a service to our growing and highly prestigious client base in the Swindon and surrounding areas. The role will be very varied from carrying out planned and preventative maintenance to responding to service calls. Location : Swindon Salary: Upto £22 per hour - dependent on Experience Benefits: Enhanced Holidays, Birthday day off, Long service awards, Enhanced sick pay, Bike to work scheme, referral scheme, Home support and Health cash plans. What will you do . Effectively diagnose, identify faults and failures with equipment and systems, providing effective solutions Where possible provide a first time fix response Carry out routine planned preventative maintenance Coordinate and control all documents associated with reactive & planned preventative maintenance works Liaise closely with the client (Domestic & Commercial clients) to maintain excellent stakeholder relationships Work in a safe and controlled manor following all necessary internal health & safety processes and client specific site requirements Take part in the on-call rota to support the business achieve its 24/7/365 response Who are we looking for . A highly experienced Refrigeration & Air conditioning engineer, with a minimum NVQ Level 2 qualification in Refrigeration & Air conditioning, you will be F-Gas/EN 378 compliant An individual with hands-on experience working with VRV systems, cold rooms, close control units, chilled water systems, and heat pumps. You will be used to working unsupervised A high level of interpersonal skills, you will have strong networking skills, building strong stakeholder relationships at a variety of levels with our wide range of clients You will be confident in your own ability Strong problem solving skills, you will have a "can do" attitude Ideally you will have good electrical competence including the ability to read wiring schematics and test control circuits Full Driving licence Please note you must be able to achieve a DBS certificate What will you get in return . The Package Competitive salary Paid Door to Door £90 call out payment iPad and phone Transit/Vivaro/Proace van Training and Continuous Professional Development Opportunities to progress within the business Regular overtime available Job Type: Full-time Pay: Up to £22.00 per hour Benefits: Additional leave Bereavement leave Company car Cycle to work scheme Enhanced maternity leave Enhanced paternity leave On-site parking Paid volunteer time Referral programme Sabbatical Sick pay Experience: Air conditioning & Refrigeration : 3 years (required) Licence/Certification: Driving Licence (required) Work Location: On the road
About Us SharkNinja is a global product design and technology company, with a diversified portfolio of 5-star rated lifestyle solutions that positively impact people's lives in homes around the world. Powered by two trusted, global brands, Shark and Ninja , the company has a proven track record of bringing disruptive innovation to market and developing one consumer product after another has allowed SharkNinja to enter multiple product categories, driving significant growth and market share gains. Headquartered in Needham, Massachusetts with more than 4,100 associates, the company's products are sold at key retailers, online and offline, and through distributors around the world. About the Role We're looking for a Product Design Engineer (NPD) to help create the next generation of innovative products within our Ninja Beverage range. Based in our London Design Office, you'll play a key role in turning ideas into real, market-ready solutions-bringing both technical expertise and creative thinking to deliver products that truly delight consumers. Working in a fast-paced, collaborative environment, you'll partner with global teams across the UK, US, and China to take concepts from early design through to production. This is a hybrid role, with 3 days per week in our Battersea office . What You'll Do You'll contribute across the full product development lifecycle, combining engineering rigor with hands-on problem solving: Lead or support design studies to solve technical and consumer challenges during product development Take designs from concept through CAD, prototyping, and verification, delivering at pace Continuously refine designs to improve cost, manufacturability, quality, and consumer value Apply sound engineering principles to develop robust, real-world solutions Leverage knowledge of materials and high-volume manufacturing processes to optimise designs Build and test prototypes, conduct lab testing, and document results clearly Collaborate closely with cross-functional and global teams to bring ideas to production Communicate effectively and contribute positively to team dynamics, supporting and learning from others What You'll Bring You're a hands-on, curious engineer with a passion for creating great consumer products: Degree in Product Design Engineering, Mechanical Engineering, Industrial Design, or similar 1-3+ years' experience in a product, mechanical, or industrial design environment Experience (or strong interest) in consumer goods or household appliances Knowledge of plastic manufacturing processes is a plus Proven ability to take products from concept to market Proficiency in CAD tools such as SolidWorks or Creo Strong problem-solving skills, with the ability to work both independently and as part of a team Hands-on approach to prototyping, testing, and validation Collaborative mindset, flexibility, and a positive, inquisitive attitude Our Culture At SharkNinja, we don't just raise the bar-we push past it every single day. Our Outrageously Extraordinary mindset drives us to tackle the impossible, push boundaries, and deliver results that others only dream of. If you thrive on breaking out of your swim lane, you'll be right at home. What We Offer We offer competitive health insurance, retirement plans, paid time off, employee stock purchase options, wellness programs, SharkNinja product discounts, and more. We empower your personal and professional growth with high impact Learning Programs featuring bold voices redefining what's possible. When you join, you're not just part of a company-you're part of an outrageously extraordinary community. To gether, we won't just launch products- we'll disrupt entire markets. At SharkNinja, Diversity, Equity, and Inclusion are vital to our global success. Valuing each unique voice and blending all of our diverse skills strengthens SharkNinja's innovation every day. We support ALL associates in bringing their authentic selves to work, making an impact, and having the opportunity for career acceleration. With help from our leadership, associates, and our community, we aim to have equity be a key component of the SharkNinja DNA. Learn more about us: Life At SharkNinja Outrageously Extraordinary SharkNinja Candidate Privacy Notice For candidates based in all regions , please refer to this Candidate Privacy Notice . For candidates based in China , please refer to this Candidate Privacy Notice . For candidates based in Vietnam , please refer to this Candidate Privacy Notice . We do not discriminate on the basis of race, religion, color, national origin, sex, gender, gender expression, sexual orientation, age, marital status, veteran status, disability, or any other class protected by legislation, and local law. SharkNinja will consider reasonable accommodations consistent with legislation, and local law. If you require a reasonable accommodation to participate in the job application or interview process, please contact SharkNinja People & Culture at
May 16, 2026
Full time
About Us SharkNinja is a global product design and technology company, with a diversified portfolio of 5-star rated lifestyle solutions that positively impact people's lives in homes around the world. Powered by two trusted, global brands, Shark and Ninja , the company has a proven track record of bringing disruptive innovation to market and developing one consumer product after another has allowed SharkNinja to enter multiple product categories, driving significant growth and market share gains. Headquartered in Needham, Massachusetts with more than 4,100 associates, the company's products are sold at key retailers, online and offline, and through distributors around the world. About the Role We're looking for a Product Design Engineer (NPD) to help create the next generation of innovative products within our Ninja Beverage range. Based in our London Design Office, you'll play a key role in turning ideas into real, market-ready solutions-bringing both technical expertise and creative thinking to deliver products that truly delight consumers. Working in a fast-paced, collaborative environment, you'll partner with global teams across the UK, US, and China to take concepts from early design through to production. This is a hybrid role, with 3 days per week in our Battersea office . What You'll Do You'll contribute across the full product development lifecycle, combining engineering rigor with hands-on problem solving: Lead or support design studies to solve technical and consumer challenges during product development Take designs from concept through CAD, prototyping, and verification, delivering at pace Continuously refine designs to improve cost, manufacturability, quality, and consumer value Apply sound engineering principles to develop robust, real-world solutions Leverage knowledge of materials and high-volume manufacturing processes to optimise designs Build and test prototypes, conduct lab testing, and document results clearly Collaborate closely with cross-functional and global teams to bring ideas to production Communicate effectively and contribute positively to team dynamics, supporting and learning from others What You'll Bring You're a hands-on, curious engineer with a passion for creating great consumer products: Degree in Product Design Engineering, Mechanical Engineering, Industrial Design, or similar 1-3+ years' experience in a product, mechanical, or industrial design environment Experience (or strong interest) in consumer goods or household appliances Knowledge of plastic manufacturing processes is a plus Proven ability to take products from concept to market Proficiency in CAD tools such as SolidWorks or Creo Strong problem-solving skills, with the ability to work both independently and as part of a team Hands-on approach to prototyping, testing, and validation Collaborative mindset, flexibility, and a positive, inquisitive attitude Our Culture At SharkNinja, we don't just raise the bar-we push past it every single day. Our Outrageously Extraordinary mindset drives us to tackle the impossible, push boundaries, and deliver results that others only dream of. If you thrive on breaking out of your swim lane, you'll be right at home. What We Offer We offer competitive health insurance, retirement plans, paid time off, employee stock purchase options, wellness programs, SharkNinja product discounts, and more. We empower your personal and professional growth with high impact Learning Programs featuring bold voices redefining what's possible. When you join, you're not just part of a company-you're part of an outrageously extraordinary community. To gether, we won't just launch products- we'll disrupt entire markets. At SharkNinja, Diversity, Equity, and Inclusion are vital to our global success. Valuing each unique voice and blending all of our diverse skills strengthens SharkNinja's innovation every day. We support ALL associates in bringing their authentic selves to work, making an impact, and having the opportunity for career acceleration. With help from our leadership, associates, and our community, we aim to have equity be a key component of the SharkNinja DNA. Learn more about us: Life At SharkNinja Outrageously Extraordinary SharkNinja Candidate Privacy Notice For candidates based in all regions , please refer to this Candidate Privacy Notice . For candidates based in China , please refer to this Candidate Privacy Notice . For candidates based in Vietnam , please refer to this Candidate Privacy Notice . We do not discriminate on the basis of race, religion, color, national origin, sex, gender, gender expression, sexual orientation, age, marital status, veteran status, disability, or any other class protected by legislation, and local law. SharkNinja will consider reasonable accommodations consistent with legislation, and local law. If you require a reasonable accommodation to participate in the job application or interview process, please contact SharkNinja People & Culture at
A leading tech firm in Cambridge seeks a Staff Verification Engineer to take ownership of verification for multi-FPGA system designs. You will work collaboratively with hardware designers to ensure high performance and reliability standards are met. Candidates should have experience verifying FPGA designs, excellent debugging skills, and adaptability to changing requirements. Offering a comprehensive benefits package including bonuses and private medical insurance, this full-time position invites those passionate about advancing technology to apply.
May 16, 2026
Full time
A leading tech firm in Cambridge seeks a Staff Verification Engineer to take ownership of verification for multi-FPGA system designs. You will work collaboratively with hardware designers to ensure high performance and reliability standards are met. Candidates should have experience verifying FPGA designs, excellent debugging skills, and adaptability to changing requirements. Offering a comprehensive benefits package including bonuses and private medical insurance, this full-time position invites those passionate about advancing technology to apply.
