As the Facilities and Maintenance Supervisor, you will ensure the efficient of facilities and production operation areas. Your responsibilities will encompass a wide range of maintenance tasks, project management, and team leadership. You will work closely with a team of technicians to maintain and repair equipment, buildings, and support various site projects. Key Responsibilities Perform routine maintenance and upkeep tasks to ensure the continuous operation of equipment and facilities. Install new appliances and equipment as needed to support production and operational requirements. Utilize your fabrication and welding skills to support project work and other site-related tasks. Inspect, maintain, and troubleshoot equipment and systems, including ventilation and safety systems like fire alarms. Key Requirements Possess a high level of competency in plumbing, carpentry, and fabrication. Proficiency in using hand and electrical tools is essential. Be competent in the use of common machine shop equipment such as lathes, band/chop saws, pillar drills, grinders, etc. Hold a City and Guilds Level 2 minimum (Level 3 preferred) or a similar structural welding qualification. ASME certification would be an advantage. Ability to read and interpret technical manuals and drawings. Have good communication and interpersonal skills to coordinate with team members and vendors.
May 17, 2026
Full time
As the Facilities and Maintenance Supervisor, you will ensure the efficient of facilities and production operation areas. Your responsibilities will encompass a wide range of maintenance tasks, project management, and team leadership. You will work closely with a team of technicians to maintain and repair equipment, buildings, and support various site projects. Key Responsibilities Perform routine maintenance and upkeep tasks to ensure the continuous operation of equipment and facilities. Install new appliances and equipment as needed to support production and operational requirements. Utilize your fabrication and welding skills to support project work and other site-related tasks. Inspect, maintain, and troubleshoot equipment and systems, including ventilation and safety systems like fire alarms. Key Requirements Possess a high level of competency in plumbing, carpentry, and fabrication. Proficiency in using hand and electrical tools is essential. Be competent in the use of common machine shop equipment such as lathes, band/chop saws, pillar drills, grinders, etc. Hold a City and Guilds Level 2 minimum (Level 3 preferred) or a similar structural welding qualification. ASME certification would be an advantage. Ability to read and interpret technical manuals and drawings. Have good communication and interpersonal skills to coordinate with team members and vendors.
As a Facilities Technician, your main duty is to maintain facilities and production operations efficiently. You will perform planned maintenance, repairs, and assist in projects to keep facilities running smoothly. Responsibilities Swiftly address and resolve equipment and building issues. Assist in projects that need facilities support, like new installations, modifications, and commissioning. Demonstrate practical expertise in areas like carpentry, electrical work, HVAC, plumbing, and more. Maintain buildings by decorating, painting, and making minor repairs. Perform fabrication and welding for repairs and new projects. Keep tools and equipment in good condition and well-organized.
May 17, 2026
Full time
As a Facilities Technician, your main duty is to maintain facilities and production operations efficiently. You will perform planned maintenance, repairs, and assist in projects to keep facilities running smoothly. Responsibilities Swiftly address and resolve equipment and building issues. Assist in projects that need facilities support, like new installations, modifications, and commissioning. Demonstrate practical expertise in areas like carpentry, electrical work, HVAC, plumbing, and more. Maintain buildings by decorating, painting, and making minor repairs. Perform fabrication and welding for repairs and new projects. Keep tools and equipment in good condition and well-organized.
Construction Lecturer / Assessor Salary: £25 - £50 per hour / Ranging from £28,000 - £45,000 per annum Location: We are recruiting in several FE locations across the North. Job Type: Temporary and Permanent positions available. Working Hours: Part-time and Full-time positions available. Are you an experienced and resilient Construction Lecturer ? Would you like to work with young people undertaking vocational study programmes? If so, read on to find out how to join the UK's leading Further Education recruiter with additional benefits, offers and referral schemes. Reed Further Education are a leading recruitment agency working with Colleges, Prisons, Universities, and Training Providers across the UK. We are always looking for talented and aspiring Lecturers to join our team and help us deliver high-quality education to learners. Available Roles Reed Further Education are excited to work with Further Education Colleges across the North to recruit Lecturers to deliver accredited courses to young people.We are particularly interested in speaking to Lecturers of: Bricklaying Electrical Installation Multi-Skills Plumbing and Gas Plastering Carpentry and Joinery Construction Plant Operations HVAC (Heating, Ventilation & Air Conditioning) Fabrication and Welding Renewable Technologies CAD Day-to-Day of the role: Plan, deliver and assess vocational courses in the College. Co-ordinate the teaching and assessment of programmes, as identified by the Head of School, which includes liaison with other College staff. Fulfil the role of class tutor with administrative and pastoral responsibilities. Requirements: Occupationally competent in relevant subject. Possession of a relevant teaching or training qualification (e.g. QTS, QTLS, DTTLS, PGCE, A1, CAVA, TAQA). Experience of teaching on and assessing accredited qualifications from Entry Level to Level 3, 4 or 5. Benefits of working for Reed Further Education/our client: Exclusive representation to leading FE colleges and training providers in the area 1-2-1 Specialist Consultant who will search for jobs on your behalf. CV writing and job interview tips! The ability to sign up to a Health Cash Plan and Reed Discount Club. Entitlement to Statutory Sick Pay, Statutory Maternity, Paternity and Adoption Pay, Parental Leave and Antenatal/Pre-Adoption Appointment Payment Access to Training and Development - Reed Assessment Centre - Reed Learning. Eye Test and Spectacle Vouchers Great referral bonus' (up to £200 per successful referral!) To apply for this role, please send us your updated CV by clicking 'Apply Now'. Your application should demonstrate your passion for educational support and your commitment to safeguarding and promoting the welfare of children and young people. Not looking for a teaching role? We are also registering support staff, assessors and technicians, and other FE positions including HR, finance, facilities, administrators. We also have a specialist team of interim and senior management consultants with over 20 years' experience in the sector. "All candidates who register with Reed Further Education will have 2 years' referencing taken up and will be required to have a DBS check completed. All offers are conditional upon satisfactory background checks - If you are on the Barred List, it is against the law to apply and to be hired for a role that includes regulated activity with the concerned group."
May 16, 2026
Seasonal
Construction Lecturer / Assessor Salary: £25 - £50 per hour / Ranging from £28,000 - £45,000 per annum Location: We are recruiting in several FE locations across the North. Job Type: Temporary and Permanent positions available. Working Hours: Part-time and Full-time positions available. Are you an experienced and resilient Construction Lecturer ? Would you like to work with young people undertaking vocational study programmes? If so, read on to find out how to join the UK's leading Further Education recruiter with additional benefits, offers and referral schemes. Reed Further Education are a leading recruitment agency working with Colleges, Prisons, Universities, and Training Providers across the UK. We are always looking for talented and aspiring Lecturers to join our team and help us deliver high-quality education to learners. Available Roles Reed Further Education are excited to work with Further Education Colleges across the North to recruit Lecturers to deliver accredited courses to young people.We are particularly interested in speaking to Lecturers of: Bricklaying Electrical Installation Multi-Skills Plumbing and Gas Plastering Carpentry and Joinery Construction Plant Operations HVAC (Heating, Ventilation & Air Conditioning) Fabrication and Welding Renewable Technologies CAD Day-to-Day of the role: Plan, deliver and assess vocational courses in the College. Co-ordinate the teaching and assessment of programmes, as identified by the Head of School, which includes liaison with other College staff. Fulfil the role of class tutor with administrative and pastoral responsibilities. Requirements: Occupationally competent in relevant subject. Possession of a relevant teaching or training qualification (e.g. QTS, QTLS, DTTLS, PGCE, A1, CAVA, TAQA). Experience of teaching on and assessing accredited qualifications from Entry Level to Level 3, 4 or 5. Benefits of working for Reed Further Education/our client: Exclusive representation to leading FE colleges and training providers in the area 1-2-1 Specialist Consultant who will search for jobs on your behalf. CV writing and job interview tips! The ability to sign up to a Health Cash Plan and Reed Discount Club. Entitlement to Statutory Sick Pay, Statutory Maternity, Paternity and Adoption Pay, Parental Leave and Antenatal/Pre-Adoption Appointment Payment Access to Training and Development - Reed Assessment Centre - Reed Learning. Eye Test and Spectacle Vouchers Great referral bonus' (up to £200 per successful referral!) To apply for this role, please send us your updated CV by clicking 'Apply Now'. Your application should demonstrate your passion for educational support and your commitment to safeguarding and promoting the welfare of children and young people. Not looking for a teaching role? We are also registering support staff, assessors and technicians, and other FE positions including HR, finance, facilities, administrators. We also have a specialist team of interim and senior management consultants with over 20 years' experience in the sector. "All candidates who register with Reed Further Education will have 2 years' referencing taken up and will be required to have a DBS check completed. All offers are conditional upon satisfactory background checks - If you are on the Barred List, it is against the law to apply and to be hired for a role that includes regulated activity with the concerned group."
Construction Lecturer / Assessor Salary: £25 - £50 per hour / Ranging from £28,000 - £45,000 per annum Location: We are recruiting in several FE locations across the North. Job Type: Temporary and Permanent positions available. Working Hours: Part-time and Full-time positions available. Are you an experienced and resilient Construction Lecturer ? Would you like to work with young people undertaking vocational study programmes? If so, read on to find out how to join the UK's leading Further Education recruiter with additional benefits, offers and referral schemes. Reed Further Education are a leading recruitment agency working with Colleges, Prisons, Universities, and Training Providers across the UK. We are always looking for talented and aspiring Lecturers to join our team and help us deliver high-quality education to learners. Available Roles Reed Further Education are excited to work with Further Education Colleges across the North to recruit Lecturers to deliver accredited courses to young people.We are particularly interested in speaking to Lecturers of: Bricklaying Electrical Installation Multi-Skills Plumbing and Gas Plastering Carpentry and Joinery Construction Plant Operations HVAC (Heating, Ventilation & Air Conditioning) Fabrication and Welding Renewable Technologies CAD Day-to-Day of the role: Plan, deliver and assess vocational courses in the College. Co-ordinate the teaching and assessment of programmes, as identified by the Head of School, which includes liaison with other College staff. Fulfil the role of class tutor with administrative and pastoral responsibilities. Requirements: Occupationally competent in relevant subject. Possession of a relevant teaching or training qualification (e.g. QTS, QTLS, DTTLS, PGCE, A1, CAVA, TAQA). Experience of teaching on and assessing accredited qualifications from Entry Level to Level 3, 4 or 5. Benefits of working for Reed Further Education/our client: Exclusive representation to leading FE colleges and training providers in the area 1-2-1 Specialist Consultant who will search for jobs on your behalf. CV writing and job interview tips! The ability to sign up to a Health Cash Plan and Reed Discount Club. Entitlement to Statutory Sick Pay, Statutory Maternity, Paternity and Adoption Pay, Parental Leave and Antenatal/Pre-Adoption Appointment Payment Access to Training and Development - Reed Assessment Centre - Reed Learning. Eye Test and Spectacle Vouchers Great referral bonus' (up to £200 per successful referral!) To apply for this role, please send us your updated CV by clicking 'Apply Now'. Your application should demonstrate your passion for educational support and your commitment to safeguarding and promoting the welfare of children and young people. Not looking for a teaching role? We are also registering support staff, assessors and technicians, and other FE positions including HR, finance, facilities, administrators. We also have a specialist team of interim and senior management consultants with over 20 years' experience in the sector. "All candidates who register with Reed Further Education will have 2 years' referencing taken up and will be required to have a DBS check completed. All offers are conditional upon satisfactory background checks - If you are on the Barred List, it is against the law to apply and to be hired for a role that includes regulated activity with the concerned group."
May 16, 2026
Seasonal
Construction Lecturer / Assessor Salary: £25 - £50 per hour / Ranging from £28,000 - £45,000 per annum Location: We are recruiting in several FE locations across the North. Job Type: Temporary and Permanent positions available. Working Hours: Part-time and Full-time positions available. Are you an experienced and resilient Construction Lecturer ? Would you like to work with young people undertaking vocational study programmes? If so, read on to find out how to join the UK's leading Further Education recruiter with additional benefits, offers and referral schemes. Reed Further Education are a leading recruitment agency working with Colleges, Prisons, Universities, and Training Providers across the UK. We are always looking for talented and aspiring Lecturers to join our team and help us deliver high-quality education to learners. Available Roles Reed Further Education are excited to work with Further Education Colleges across the North to recruit Lecturers to deliver accredited courses to young people.We are particularly interested in speaking to Lecturers of: Bricklaying Electrical Installation Multi-Skills Plumbing and Gas Plastering Carpentry and Joinery Construction Plant Operations HVAC (Heating, Ventilation & Air Conditioning) Fabrication and Welding Renewable Technologies CAD Day-to-Day of the role: Plan, deliver and assess vocational courses in the College. Co-ordinate the teaching and assessment of programmes, as identified by the Head of School, which includes liaison with other College staff. Fulfil the role of class tutor with administrative and pastoral responsibilities. Requirements: Occupationally competent in relevant subject. Possession of a relevant teaching or training qualification (e.g. QTS, QTLS, DTTLS, PGCE, A1, CAVA, TAQA). Experience of teaching on and assessing accredited qualifications from Entry Level to Level 3, 4 or 5. Benefits of working for Reed Further Education/our client: Exclusive representation to leading FE colleges and training providers in the area 1-2-1 Specialist Consultant who will search for jobs on your behalf. CV writing and job interview tips! The ability to sign up to a Health Cash Plan and Reed Discount Club. Entitlement to Statutory Sick Pay, Statutory Maternity, Paternity and Adoption Pay, Parental Leave and Antenatal/Pre-Adoption Appointment Payment Access to Training and Development - Reed Assessment Centre - Reed Learning. Eye Test and Spectacle Vouchers Great referral bonus' (up to £200 per successful referral!) To apply for this role, please send us your updated CV by clicking 'Apply Now'. Your application should demonstrate your passion for educational support and your commitment to safeguarding and promoting the welfare of children and young people. Not looking for a teaching role? We are also registering support staff, assessors and technicians, and other FE positions including HR, finance, facilities, administrators. We also have a specialist team of interim and senior management consultants with over 20 years' experience in the sector. "All candidates who register with Reed Further Education will have 2 years' referencing taken up and will be required to have a DBS check completed. All offers are conditional upon satisfactory background checks - If you are on the Barred List, it is against the law to apply and to be hired for a role that includes regulated activity with the concerned group."
Construction Lecturer / Assessor Salary: £25 - £50 per hour / Ranging from £28,000 - £45,000 per annum Location: We are recruiting in several FE locations across the North. Job Type: Temporary and Permanent positions available. Working Hours: Part-time and Full-time positions available. Are you an experienced and resilient Construction Lecturer ? Would you like to work with young people undertaking vocational study programmes? If so, read on to find out how to join the UK's leading Further Education recruiter with additional benefits, offers and referral schemes. Reed Further Education are a leading recruitment agency working with Colleges, Prisons, Universities, and Training Providers across the UK. We are always looking for talented and aspiring Lecturers to join our team and help us deliver high-quality education to learners. Available Roles Reed Further Education are excited to work with Further Education Colleges across the North to recruit Lecturers to deliver accredited courses to young people.We are particularly interested in speaking to Lecturers of: Bricklaying Electrical Installation Multi-Skills Plumbing and Gas Plastering Carpentry and Joinery Construction Plant Operations HVAC (Heating, Ventilation & Air Conditioning) Fabrication and Welding Renewable Technologies CAD Day-to-Day of the role: Plan, deliver and assess vocational courses in the College. Co-ordinate the teaching and assessment of programmes, as identified by the Head of School, which includes liaison with other College staff. Fulfil the role of class tutor with administrative and pastoral responsibilities. Requirements: Occupationally competent in relevant subject. Possession of a relevant teaching or training qualification (e.g. QTS, QTLS, DTTLS, PGCE, A1, CAVA, TAQA). Experience of teaching on and assessing accredited qualifications from Entry Level to Level 3, 4 or 5. Benefits of working for Reed Further Education/our client: Exclusive representation to leading FE colleges and training providers in the area 1-2-1 Specialist Consultant who will search for jobs on your behalf. CV writing and job interview tips! The ability to sign up to a Health Cash Plan and Reed Discount Club. Entitlement to Statutory Sick Pay, Statutory Maternity, Paternity and Adoption Pay, Parental Leave and Antenatal/Pre-Adoption Appointment Payment Access to Training and Development - Reed Assessment Centre - Reed Learning. Eye Test and Spectacle Vouchers Great referral bonus' (up to £200 per successful referral!) To apply for this role, please send us your updated CV by clicking 'Apply Now'. Your application should demonstrate your passion for educational support and your commitment to safeguarding and promoting the welfare of children and young people. Not looking for a teaching role? We are also registering support staff, assessors and technicians, and other FE positions including HR, finance, facilities, administrators. We also have a specialist team of interim and senior management consultants with over 20 years' experience in the sector. "All candidates who register with Reed Further Education will have 2 years' referencing taken up and will be required to have a DBS check completed. All offers are conditional upon satisfactory background checks - If you are on the Barred List, it is against the law to apply and to be hired for a role that includes regulated activity with the concerned group."
May 16, 2026
Seasonal
Construction Lecturer / Assessor Salary: £25 - £50 per hour / Ranging from £28,000 - £45,000 per annum Location: We are recruiting in several FE locations across the North. Job Type: Temporary and Permanent positions available. Working Hours: Part-time and Full-time positions available. Are you an experienced and resilient Construction Lecturer ? Would you like to work with young people undertaking vocational study programmes? If so, read on to find out how to join the UK's leading Further Education recruiter with additional benefits, offers and referral schemes. Reed Further Education are a leading recruitment agency working with Colleges, Prisons, Universities, and Training Providers across the UK. We are always looking for talented and aspiring Lecturers to join our team and help us deliver high-quality education to learners. Available Roles Reed Further Education are excited to work with Further Education Colleges across the North to recruit Lecturers to deliver accredited courses to young people.We are particularly interested in speaking to Lecturers of: Bricklaying Electrical Installation Multi-Skills Plumbing and Gas Plastering Carpentry and Joinery Construction Plant Operations HVAC (Heating, Ventilation & Air Conditioning) Fabrication and Welding Renewable Technologies CAD Day-to-Day of the role: Plan, deliver and assess vocational courses in the College. Co-ordinate the teaching and assessment of programmes, as identified by the Head of School, which includes liaison with other College staff. Fulfil the role of class tutor with administrative and pastoral responsibilities. Requirements: Occupationally competent in relevant subject. Possession of a relevant teaching or training qualification (e.g. QTS, QTLS, DTTLS, PGCE, A1, CAVA, TAQA). Experience of teaching on and assessing accredited qualifications from Entry Level to Level 3, 4 or 5. Benefits of working for Reed Further Education/our client: Exclusive representation to leading FE colleges and training providers in the area 1-2-1 Specialist Consultant who will search for jobs on your behalf. CV writing and job interview tips! The ability to sign up to a Health Cash Plan and Reed Discount Club. Entitlement to Statutory Sick Pay, Statutory Maternity, Paternity and Adoption Pay, Parental Leave and Antenatal/Pre-Adoption Appointment Payment Access to Training and Development - Reed Assessment Centre - Reed Learning. Eye Test and Spectacle Vouchers Great referral bonus' (up to £200 per successful referral!) To apply for this role, please send us your updated CV by clicking 'Apply Now'. Your application should demonstrate your passion for educational support and your commitment to safeguarding and promoting the welfare of children and young people. Not looking for a teaching role? We are also registering support staff, assessors and technicians, and other FE positions including HR, finance, facilities, administrators. We also have a specialist team of interim and senior management consultants with over 20 years' experience in the sector. "All candidates who register with Reed Further Education will have 2 years' referencing taken up and will be required to have a DBS check completed. All offers are conditional upon satisfactory background checks - If you are on the Barred List, it is against the law to apply and to be hired for a role that includes regulated activity with the concerned group."
HAWK3 Talent Solutions
West Aberthaw, South Glamorgan
Job Title: Facilities Technician Salary: (£37k - £42k) DOE - Paid hourly, overtime expected Department: Maintenance & Facilities Department Location: St Athan, South Wales, CF62 4WB Contract: Permanent Hours: 39 hours - (Mon-Thurs 06:15 to 15:15, Fri 06:15 to 11:15) Benefits: Cycle to Work, Employee Assistance Programme, Long-service Awards, Company, Pension Role Purpose The Facilities Technician will be responsible for the day-to-day planned and reactive maintenance of all facilities and building fabric (i.e. welfare areas, HVAC, electrical distribution & various plant rooms etc.) across the estate working within a multi-disciplined maintenance team led by AML Maintenance Management Team. The individual should be highly motivated, ensuring the client receives the best service, whilst having a common-sense approach to commercial aspects of the contract. You will also be responsible for supporting improving, implementing & maintaining technical processes and procedures and will lead Health and Safety standards in line with site requirements. Main Duties and Responsibilities Repair and maintain all facilities and building fabric equipment and machinery in a timely and efficient manner based on criticality to production stoppages. Carry out the Planned Preventative Maintenance (PPM) Schedule to reduce breakdowns and raise any reactive maintenance work required. Ensure that all maintenance work performed is always carried out in a safe manner ensuring that all appropriate risk assessments and method statements are adhered to and comply with relevant Health & Safety regulations. Improve the current PPM system and assist in the integration of the customers Operating System for future PPM management of infrastructure assets. Identify opportunities for improvements to working processes and customer assets, undertaking or assisting with their implementation. Understand the customer quality needs and to comply with the various audit processes to ensure that both customers expectations are met. Apply company policies, processes and procedures where stipulated and, where necessary, develop, or assist in the development of new practices. Sub-contractor management in line with customer and site management procedures. Participate in the implementation of contingency procedures for asset breakdowns and other site-specific customer requirements. Ensure customers departmental monthly KPI s are achieved as per contractual agreements. Support an "out of hours" reactive maintenance function working with the site based technical team &/or Sub-contractors for all aspects of critical plant and equipment. Qualifications, Knowledge and Experience Essential Qualifications NVQ Level 2 - Electrical or Mechanical Engineering (Or equivalent) 18th Edition Electrical IPAF Fabrication & Welding (415V) Electrical LV Systems H&S Systems and Procedures Microsoft Office - Inc. Word, PowerPoint and Excel Compressed Air Systems Gas Boilers / Burners HVAC - AHU's / ACU's / FCU's HW Systems & Controls CAFM / CMMS / BMS Systems Water Treatment Systems Desirable HNC or NVQ Level 3 - Engineering (or equivalent) Electrical Inspecting & Testing Gas Safe Forklift License Basic PLC programming capability Fault Finding capability and problem resolution techniques Refrigeration (F-Gas) Interrogating Trend BMS Systems Electrical modifications and installations Automotive manufacturing background Chlorine Dosing Systems Closing date is 15th May 2026
May 16, 2026
Full time
Job Title: Facilities Technician Salary: (£37k - £42k) DOE - Paid hourly, overtime expected Department: Maintenance & Facilities Department Location: St Athan, South Wales, CF62 4WB Contract: Permanent Hours: 39 hours - (Mon-Thurs 06:15 to 15:15, Fri 06:15 to 11:15) Benefits: Cycle to Work, Employee Assistance Programme, Long-service Awards, Company, Pension Role Purpose The Facilities Technician will be responsible for the day-to-day planned and reactive maintenance of all facilities and building fabric (i.e. welfare areas, HVAC, electrical distribution & various plant rooms etc.) across the estate working within a multi-disciplined maintenance team led by AML Maintenance Management Team. The individual should be highly motivated, ensuring the client receives the best service, whilst having a common-sense approach to commercial aspects of the contract. You will also be responsible for supporting improving, implementing & maintaining technical processes and procedures and will lead Health and Safety standards in line with site requirements. Main Duties and Responsibilities Repair and maintain all facilities and building fabric equipment and machinery in a timely and efficient manner based on criticality to production stoppages. Carry out the Planned Preventative Maintenance (PPM) Schedule to reduce breakdowns and raise any reactive maintenance work required. Ensure that all maintenance work performed is always carried out in a safe manner ensuring that all appropriate risk assessments and method statements are adhered to and comply with relevant Health & Safety regulations. Improve the current PPM system and assist in the integration of the customers Operating System for future PPM management of infrastructure assets. Identify opportunities for improvements to working processes and customer assets, undertaking or assisting with their implementation. Understand the customer quality needs and to comply with the various audit processes to ensure that both customers expectations are met. Apply company policies, processes and procedures where stipulated and, where necessary, develop, or assist in the development of new practices. Sub-contractor management in line with customer and site management procedures. Participate in the implementation of contingency procedures for asset breakdowns and other site-specific customer requirements. Ensure customers departmental monthly KPI s are achieved as per contractual agreements. Support an "out of hours" reactive maintenance function working with the site based technical team &/or Sub-contractors for all aspects of critical plant and equipment. Qualifications, Knowledge and Experience Essential Qualifications NVQ Level 2 - Electrical or Mechanical Engineering (Or equivalent) 18th Edition Electrical IPAF Fabrication & Welding (415V) Electrical LV Systems H&S Systems and Procedures Microsoft Office - Inc. Word, PowerPoint and Excel Compressed Air Systems Gas Boilers / Burners HVAC - AHU's / ACU's / FCU's HW Systems & Controls CAFM / CMMS / BMS Systems Water Treatment Systems Desirable HNC or NVQ Level 3 - Engineering (or equivalent) Electrical Inspecting & Testing Gas Safe Forklift License Basic PLC programming capability Fault Finding capability and problem resolution techniques Refrigeration (F-Gas) Interrogating Trend BMS Systems Electrical modifications and installations Automotive manufacturing background Chlorine Dosing Systems Closing date is 15th May 2026
Construction Lecturer / Assessor Salary: £25 - £50 per hour / Ranging from £28,000 - £45,000 per annum Location: We are recruiting in several FE locations across the North. Job Type: Temporary and Permanent positions available. Working Hours: Part-time and Full-time positions available. Are you an experienced and resilient Construction Lecturer ? Would you like to work with young people undertaking vocational study programmes? If so, read on to find out how to join the UK's leading Further Education recruiter with additional benefits, offers and referral schemes. Reed Further Education are a leading recruitment agency working with Colleges, Prisons, Universities, and Training Providers across the UK. We are always looking for talented and aspiring Lecturers to join our team and help us deliver high-quality education to learners. Available Roles Reed Further Education are excited to work with Further Education Colleges across the North to recruit Lecturers to deliver accredited courses to young people.We are particularly interested in speaking to Lecturers of: Bricklaying Electrical Installation Multi-Skills Plumbing and Gas Plastering Carpentry and Joinery Construction Plant Operations HVAC (Heating, Ventilation & Air Conditioning) Fabrication and Welding Renewable Technologies CAD Day-to-Day of the role: Plan, deliver and assess vocational courses in the College. Co-ordinate the teaching and assessment of programmes, as identified by the Head of School, which includes liaison with other College staff. Fulfil the role of class tutor with administrative and pastoral responsibilities. Requirements: Occupationally competent in relevant subject. Possession of a relevant teaching or training qualification (e.g. QTS, QTLS, DTTLS, PGCE, A1, CAVA, TAQA). Experience of teaching on and assessing accredited qualifications from Entry Level to Level 3, 4 or 5. Benefits of working for Reed Further Education/our client: Exclusive representation to leading FE colleges and training providers in the area 1-2-1 Specialist Consultant who will search for jobs on your behalf. CV writing and job interview tips! The ability to sign up to a Health Cash Plan and Reed Discount Club. Entitlement to Statutory Sick Pay, Statutory Maternity, Paternity and Adoption Pay, Parental Leave and Antenatal/Pre-Adoption Appointment Payment Access to Training and Development - Reed Assessment Centre - Reed Learning. Eye Test and Spectacle Vouchers Great referral bonus' (up to £200 per successful referral!) To apply for this role, please send us your updated CV by clicking 'Apply Now'. Your application should demonstrate your passion for educational support and your commitment to safeguarding and promoting the welfare of children and young people. Not looking for a teaching role? We are also registering support staff, assessors and technicians, and other FE positions including HR, finance, facilities, administrators. We also have a specialist team of interim and senior management consultants with over 20 years' experience in the sector. "All candidates who register with Reed Further Education will have 2 years' referencing taken up and will be required to have a DBS check completed. All offers are conditional upon satisfactory background checks - If you are on the Barred List, it is against the law to apply and to be hired for a role that includes regulated activity with the concerned group."
May 15, 2026
Seasonal
Construction Lecturer / Assessor Salary: £25 - £50 per hour / Ranging from £28,000 - £45,000 per annum Location: We are recruiting in several FE locations across the North. Job Type: Temporary and Permanent positions available. Working Hours: Part-time and Full-time positions available. Are you an experienced and resilient Construction Lecturer ? Would you like to work with young people undertaking vocational study programmes? If so, read on to find out how to join the UK's leading Further Education recruiter with additional benefits, offers and referral schemes. Reed Further Education are a leading recruitment agency working with Colleges, Prisons, Universities, and Training Providers across the UK. We are always looking for talented and aspiring Lecturers to join our team and help us deliver high-quality education to learners. Available Roles Reed Further Education are excited to work with Further Education Colleges across the North to recruit Lecturers to deliver accredited courses to young people.We are particularly interested in speaking to Lecturers of: Bricklaying Electrical Installation Multi-Skills Plumbing and Gas Plastering Carpentry and Joinery Construction Plant Operations HVAC (Heating, Ventilation & Air Conditioning) Fabrication and Welding Renewable Technologies CAD Day-to-Day of the role: Plan, deliver and assess vocational courses in the College. Co-ordinate the teaching and assessment of programmes, as identified by the Head of School, which includes liaison with other College staff. Fulfil the role of class tutor with administrative and pastoral responsibilities. Requirements: Occupationally competent in relevant subject. Possession of a relevant teaching or training qualification (e.g. QTS, QTLS, DTTLS, PGCE, A1, CAVA, TAQA). Experience of teaching on and assessing accredited qualifications from Entry Level to Level 3, 4 or 5. Benefits of working for Reed Further Education/our client: Exclusive representation to leading FE colleges and training providers in the area 1-2-1 Specialist Consultant who will search for jobs on your behalf. CV writing and job interview tips! The ability to sign up to a Health Cash Plan and Reed Discount Club. Entitlement to Statutory Sick Pay, Statutory Maternity, Paternity and Adoption Pay, Parental Leave and Antenatal/Pre-Adoption Appointment Payment Access to Training and Development - Reed Assessment Centre - Reed Learning. Eye Test and Spectacle Vouchers Great referral bonus' (up to £200 per successful referral!) To apply for this role, please send us your updated CV by clicking 'Apply Now'. Your application should demonstrate your passion for educational support and your commitment to safeguarding and promoting the welfare of children and young people. Not looking for a teaching role? We are also registering support staff, assessors and technicians, and other FE positions including HR, finance, facilities, administrators. We also have a specialist team of interim and senior management consultants with over 20 years' experience in the sector. "All candidates who register with Reed Further Education will have 2 years' referencing taken up and will be required to have a DBS check completed. All offers are conditional upon satisfactory background checks - If you are on the Barred List, it is against the law to apply and to be hired for a role that includes regulated activity with the concerned group."
HGV Technician - Earn 60,000+ in a Stable, Well-Paid Workshop Role West Thurrock, Essex 49,140 Basic + Overtime OTE 60,000+ Full-Time 45 Hours Per Week Tired of Being Undervalued? If you're an experienced HGV Technician who's fed up with poor management, unrealistic workloads, or workshops that don't appreciate skilled engineers - this is the opportunity you've been waiting for. We're looking for a proven HGV Unit/Trailer Technician to join a busy, established workshop in West Thurrock where your experience is respected, your overtime is available, and your earning potential is real. This is not a dead-end role. It's a long-term opportunity with a company that has built its reputation over 35+ years by investing in good people and keeping skilled technicians happy. What's In It For You? 49,140 guaranteed basic salary Overtime paid at 26 per hour Realistic 60,000+ earnings Stable, full-time position Supportive workshop environment Modern facilities and varied work Ongoing training and development On-site parking Pension scheme 28 days holiday including bank holidays The Work You'll be working on a wide range of HGV units and trailers carrying out: Servicing and maintenance Diagnostics and fault finding Repairs and MOT prep Trailer work Welding/fabrication work where applicable You'll have the freedom to get on with the job properly while working alongside experienced professionals who know the industry inside out. What We Need From You Minimum 5 years' HGV/trailer experience NVQ Level 3 or equivalent qualification Strong diagnostic skills Ability to work independently and as part of a team Full UK driving licence Bonus points if you hold a Class 1 licence or welding qualifications - and support can be provided to gain additional licences. Why Technicians Stay Here Because the workshop is organised. Because the overtime is there if you want it. Because management understands the trade. Because good technicians are treated properly. To apply, send your CV to (url removed) For more information, call (phone number removed) If this role is not right for you but would suit a friend or colleague, paid referral fees are available for successful placements. INDHP
May 12, 2026
Full time
HGV Technician - Earn 60,000+ in a Stable, Well-Paid Workshop Role West Thurrock, Essex 49,140 Basic + Overtime OTE 60,000+ Full-Time 45 Hours Per Week Tired of Being Undervalued? If you're an experienced HGV Technician who's fed up with poor management, unrealistic workloads, or workshops that don't appreciate skilled engineers - this is the opportunity you've been waiting for. We're looking for a proven HGV Unit/Trailer Technician to join a busy, established workshop in West Thurrock where your experience is respected, your overtime is available, and your earning potential is real. This is not a dead-end role. It's a long-term opportunity with a company that has built its reputation over 35+ years by investing in good people and keeping skilled technicians happy. What's In It For You? 49,140 guaranteed basic salary Overtime paid at 26 per hour Realistic 60,000+ earnings Stable, full-time position Supportive workshop environment Modern facilities and varied work Ongoing training and development On-site parking Pension scheme 28 days holiday including bank holidays The Work You'll be working on a wide range of HGV units and trailers carrying out: Servicing and maintenance Diagnostics and fault finding Repairs and MOT prep Trailer work Welding/fabrication work where applicable You'll have the freedom to get on with the job properly while working alongside experienced professionals who know the industry inside out. What We Need From You Minimum 5 years' HGV/trailer experience NVQ Level 3 or equivalent qualification Strong diagnostic skills Ability to work independently and as part of a team Full UK driving licence Bonus points if you hold a Class 1 licence or welding qualifications - and support can be provided to gain additional licences. Why Technicians Stay Here Because the workshop is organised. Because the overtime is there if you want it. Because management understands the trade. Because good technicians are treated properly. To apply, send your CV to (url removed) For more information, call (phone number removed) If this role is not right for you but would suit a friend or colleague, paid referral fees are available for successful placements. INDHP
Vehicle & Plant Maintenance Technician Location: Wakefield Job Type: Full-time Salary: £32,061 - £34,434 Join our team as a Vehicle & Plant Maintenance Technician and play a crucial role in maintaining and repairing a diverse range of vehicles and plant equipment. This position is essential for ensuring safety, legal compliance, and supporting our Climate Change Action Plan. Day-to-day of the role: Inspect, service, and repair vehicles, plant, and equipment to meet both statutory and internal standards. Utilize both manual and computer-based diagnostic systems (e.g., CanBus, high-voltage systems) to identify faults. Conduct MOTs, taxi tests, roadworthiness checks, and provide breakdown recovery services. Operate a variety of diagnostic and testing equipment while maintaining accurate service records. Perform welding, fabrication, and manufacture parts as required. Drive and operate a range of vehicles and plant machinery. Mentor apprentices and provide support to junior staff. Ensure strict compliance with health & safety regulations, including proper use of PPE. Participate in shift work and provide out-of-hours cover as needed. Required Skills & Qualifications: NVQ Level 2 or 3 (or equivalent) in Motor Vehicle Engineering. Experience or awareness of maintenance for Electric/Hybrid Vehicles. Valid Category B driving licence (Category C LGV is desirable). Manual handling training. Desirable qualifications include MOT Tester Certification, and licences for forklift, crane, abrasive wheel, and chainsaw. NVQ Level 4 or BTEC in relevant disciplines is a plus. Benefits: Annual leave ranging from 26-36 days plus 8 Bank Holidays. Flexible working patterns. Comprehensive access to training and opportunities for career development. Wellbeing support including coaching and carers' support. Discounts on public transport and leisure facilities. Enrollment in the Local Government Pension Scheme. Discounts at various retail, entertainment, and health outlets. Cycle to work scheme. Working Conditions: 37 hours per week with rotating shifts (including 1 in 4 weeks on afternoons). The role is physically demanding, involving heavy lifting, working in confined spaces, and performing outdoor tasks in all weather conditions. Mandatory PPE usage is required.
Oct 08, 2025
Full time
Vehicle & Plant Maintenance Technician Location: Wakefield Job Type: Full-time Salary: £32,061 - £34,434 Join our team as a Vehicle & Plant Maintenance Technician and play a crucial role in maintaining and repairing a diverse range of vehicles and plant equipment. This position is essential for ensuring safety, legal compliance, and supporting our Climate Change Action Plan. Day-to-day of the role: Inspect, service, and repair vehicles, plant, and equipment to meet both statutory and internal standards. Utilize both manual and computer-based diagnostic systems (e.g., CanBus, high-voltage systems) to identify faults. Conduct MOTs, taxi tests, roadworthiness checks, and provide breakdown recovery services. Operate a variety of diagnostic and testing equipment while maintaining accurate service records. Perform welding, fabrication, and manufacture parts as required. Drive and operate a range of vehicles and plant machinery. Mentor apprentices and provide support to junior staff. Ensure strict compliance with health & safety regulations, including proper use of PPE. Participate in shift work and provide out-of-hours cover as needed. Required Skills & Qualifications: NVQ Level 2 or 3 (or equivalent) in Motor Vehicle Engineering. Experience or awareness of maintenance for Electric/Hybrid Vehicles. Valid Category B driving licence (Category C LGV is desirable). Manual handling training. Desirable qualifications include MOT Tester Certification, and licences for forklift, crane, abrasive wheel, and chainsaw. NVQ Level 4 or BTEC in relevant disciplines is a plus. Benefits: Annual leave ranging from 26-36 days plus 8 Bank Holidays. Flexible working patterns. Comprehensive access to training and opportunities for career development. Wellbeing support including coaching and carers' support. Discounts on public transport and leisure facilities. Enrollment in the Local Government Pension Scheme. Discounts at various retail, entertainment, and health outlets. Cycle to work scheme. Working Conditions: 37 hours per week with rotating shifts (including 1 in 4 weeks on afternoons). The role is physically demanding, involving heavy lifting, working in confined spaces, and performing outdoor tasks in all weather conditions. Mandatory PPE usage is required.
WALSTEAD ROCHE, one of the UK's leading web offset printers has the following vacancy for their site based in Cornwall: Electromechanical Engineer (Electrical bias) Salary £40,000 per annum + overtime opportunities at double time 42 hours per week average across 3-4 shifts Working Monday, Tuesday and Wednesday for 4 weeks, then rotating to Thursday, Friday, Saturday for 4 weeks and every other Sunday day shift on rotation 6.00am-18.00pm with a 1 hour paid break Responsible for repairs, servicing and maintenance of all production related equipment, including Fault diagnosis and repair, continuous improvement project/task work, and general site facilities tasks. In addition to these day-to-day duties the role will be allocated specific improvement projects with focus on manufacturing continuous improvement projects/Tasks. We require a multi-skilled electrical and engineering Technician (Electromechanical) who can complete both electrical and mechanical jobs across a wide range of manufacturers machines to fault diagnose, repair, complete preventative servicing and other general site facilities tasks. Benefits: Excellent work/time-off balance: Average of 3.5 days off each week. 4 days off one week, 3 days off the following week 7 weeks holiday Overtime earning opportunities every week Double time overtime on specific weekend shifts Paid break Fully funded ongoing training courses Training and development opportunities available leading to increased salary. Free on-site parking Electric car subscription scheme Company sick pay scheme The successful candidate must have: A recognised industrial Electrical qualification. As well as training and qualification to IEE 18th/19th edition preferred. Experience working on drives and PCB's. Specific training where required will be provided, OEM suppliers and via remote modem diagnostic support from the OEM. Ability to work solo as an Electromechanical Engineer diagnosing, repairing and performing servicing tasks which are both electrical and mechanical. Competent to operate a lathe. MIG/TIG welding skills preferable although not essential. Have good communication, organisational and team work skills. Self-motivation, ability to apply initiative and determined. _The Company's Information Notice can be found on the Company website. This notice sets out how your personal data will be processed and retained._ Job Types: Full-time, Permanent Pay: £40,000.00 per year Benefits: Company pension Free parking On-site parking Sick pay Ability to commute/relocate: St. Austell PL26 8LX: reliably commute or plan to relocate before starting work (required) Licence/Certification: electrical qualification? (required) Work authorisation: United Kingdom (required) Work Location: In person
Oct 01, 2025
Full time
WALSTEAD ROCHE, one of the UK's leading web offset printers has the following vacancy for their site based in Cornwall: Electromechanical Engineer (Electrical bias) Salary £40,000 per annum + overtime opportunities at double time 42 hours per week average across 3-4 shifts Working Monday, Tuesday and Wednesday for 4 weeks, then rotating to Thursday, Friday, Saturday for 4 weeks and every other Sunday day shift on rotation 6.00am-18.00pm with a 1 hour paid break Responsible for repairs, servicing and maintenance of all production related equipment, including Fault diagnosis and repair, continuous improvement project/task work, and general site facilities tasks. In addition to these day-to-day duties the role will be allocated specific improvement projects with focus on manufacturing continuous improvement projects/Tasks. We require a multi-skilled electrical and engineering Technician (Electromechanical) who can complete both electrical and mechanical jobs across a wide range of manufacturers machines to fault diagnose, repair, complete preventative servicing and other general site facilities tasks. Benefits: Excellent work/time-off balance: Average of 3.5 days off each week. 4 days off one week, 3 days off the following week 7 weeks holiday Overtime earning opportunities every week Double time overtime on specific weekend shifts Paid break Fully funded ongoing training courses Training and development opportunities available leading to increased salary. Free on-site parking Electric car subscription scheme Company sick pay scheme The successful candidate must have: A recognised industrial Electrical qualification. As well as training and qualification to IEE 18th/19th edition preferred. Experience working on drives and PCB's. Specific training where required will be provided, OEM suppliers and via remote modem diagnostic support from the OEM. Ability to work solo as an Electromechanical Engineer diagnosing, repairing and performing servicing tasks which are both electrical and mechanical. Competent to operate a lathe. MIG/TIG welding skills preferable although not essential. Have good communication, organisational and team work skills. Self-motivation, ability to apply initiative and determined. _The Company's Information Notice can be found on the Company website. This notice sets out how your personal data will be processed and retained._ Job Types: Full-time, Permanent Pay: £40,000.00 per year Benefits: Company pension Free parking On-site parking Sick pay Ability to commute/relocate: St. Austell PL26 8LX: reliably commute or plan to relocate before starting work (required) Licence/Certification: electrical qualification? (required) Work authorisation: United Kingdom (required) Work Location: In person
