Electrical & Instrumentation Technician North East + Benefits COMAH Industrial Environment Our client is looking to recruit an experienced Electrical & Instrumentation (E&I) Technician to join a well-established industrial operation in the North East. This is an excellent opportunity to work within a highly regulated COMAH environment, offering long-term stability, strong safety culture, and ongoing training and development. The role would suit someone with solid hands-on experience in electrical and instrumentation maintenance, ideally within hazardous or heavy industrial environments. CompEx and 18th Edition qualifications are highly desirable, but candidates with relevant experience in similar sectors will also be considered. Responsibilities: Carry out maintenance, calibration, testing, and repair of electrical and instrumentation equipment Diagnose faults and ensure timely resolution to maintain plant performance and availability Complete all work in line with legal requirements and company health, safety, environmental, and quality standards Use CMMS systems to manage and record maintenance activities Install, inspect, and maintain plant equipment to a high standard and within required timescales Identify and report defects, alarms, and unsafe conditions, ensuring appropriate isolation where required Follow permit-to-work and change management procedures (MOC) Support shutdown planning and maintenance activities Contribute to continuous improvement by identifying opportunities to enhance plant performance and reliability Provide guidance or basic training to colleagues where required Support the wider engineering team with additional tasks in line with competency (e.g. basic mechanical work) Requirements: As an E&I Technician, you will be responsible for carrying out both reactive and planned maintenance across a wide range of electrical and instrumentation systems to ensure safe and efficient plant operation. Experience within a COMAH environment is advantageous, however candidates from other high-hazard industries such as oil & gas, power generation, pharmaceuticals, or manufacturing will also be considered. Therefore, to be successful you should be competent in the following: Strong experience in electrical and instrumentation maintenance within an industrial environment Knowledge of COMAH regulations and associated safety standards CompEx certification (preferred) 18th Edition Wiring Regulations (desirable) Experience with PLCs, control systems, or instrumentation software is advantageous Ability to interpret technical data and resolve complex plant issues Strong understanding of permit-to-work systems and safe isolation procedures What you ll bring: Strong fault-finding and problem-solving skills A proactive and safety-first approach Ability to work independently and as part of a team Experience working in a regulated industrial environment Good communication and reporting skills Benefits: Competitive salary Pension scheme Healthcare Overtime opportunities Ongoing training and development Long-term career stability within a high-performing engineering environment
May 19, 2026
Full time
Electrical & Instrumentation Technician North East + Benefits COMAH Industrial Environment Our client is looking to recruit an experienced Electrical & Instrumentation (E&I) Technician to join a well-established industrial operation in the North East. This is an excellent opportunity to work within a highly regulated COMAH environment, offering long-term stability, strong safety culture, and ongoing training and development. The role would suit someone with solid hands-on experience in electrical and instrumentation maintenance, ideally within hazardous or heavy industrial environments. CompEx and 18th Edition qualifications are highly desirable, but candidates with relevant experience in similar sectors will also be considered. Responsibilities: Carry out maintenance, calibration, testing, and repair of electrical and instrumentation equipment Diagnose faults and ensure timely resolution to maintain plant performance and availability Complete all work in line with legal requirements and company health, safety, environmental, and quality standards Use CMMS systems to manage and record maintenance activities Install, inspect, and maintain plant equipment to a high standard and within required timescales Identify and report defects, alarms, and unsafe conditions, ensuring appropriate isolation where required Follow permit-to-work and change management procedures (MOC) Support shutdown planning and maintenance activities Contribute to continuous improvement by identifying opportunities to enhance plant performance and reliability Provide guidance or basic training to colleagues where required Support the wider engineering team with additional tasks in line with competency (e.g. basic mechanical work) Requirements: As an E&I Technician, you will be responsible for carrying out both reactive and planned maintenance across a wide range of electrical and instrumentation systems to ensure safe and efficient plant operation. Experience within a COMAH environment is advantageous, however candidates from other high-hazard industries such as oil & gas, power generation, pharmaceuticals, or manufacturing will also be considered. Therefore, to be successful you should be competent in the following: Strong experience in electrical and instrumentation maintenance within an industrial environment Knowledge of COMAH regulations and associated safety standards CompEx certification (preferred) 18th Edition Wiring Regulations (desirable) Experience with PLCs, control systems, or instrumentation software is advantageous Ability to interpret technical data and resolve complex plant issues Strong understanding of permit-to-work systems and safe isolation procedures What you ll bring: Strong fault-finding and problem-solving skills A proactive and safety-first approach Ability to work independently and as part of a team Experience working in a regulated industrial environment Good communication and reporting skills Benefits: Competitive salary Pension scheme Healthcare Overtime opportunities Ongoing training and development Long-term career stability within a high-performing engineering environment
Field Service Engineer / Water Treatment Engineer / Service Technician required to join a leading Water Treatment solutions provider. The successful Field Service Engineer / Water Treatment Engineer / Service Technician will be responsibvle for both Electrical and Mechanical maintenance, servicing, and repair of a variety of water / watewater treatment systems such as, Reverse Osmosis systems, Demineralisation systems, Water Softening Units, Ultrafiltration systems, Electro - Deionisation units, polymer dosing systems, as well as cartridge media and other related wastewater treatment equipment. The Field Service Engineer / Water Treatment Engineer / Service Technician will ideally have an engineering background, with some electrical experience, with experience working on and around water treatment systems and related components such as pumps, motros, valves, actuators, filters, UV systems, aeration systems, flow meters and instrumentation, chemical dosing systems, control systems, and related components. Package 35,000 - 40,000 depending on experience. Company vehicle. Overtime payments. Annual Bonus 25 days + Bank Holidays. Door to Door pay Pension. Additional benefits. Field Service Engineer / Water Treatment Engineer / Service Technician Role Be responsibvle for both Electrical and Mechanical maintenance, servicing, and repair of a variety of water / watewater treatment systems such as, Reverse Osmosis systems, Demineralisation systems, Water Softening Units, Ultrafiltration systems, Electro - Deionisation units, polymer dosing systems, as well as cartridge media and other related wastewater treatment equipment. Willingness to cover the South West of the UK, remotley. Working on a range of water / wastewater treatment systems, and related products. Support Installation, calibration, maintenance and verification of systems. Liaise with various engineering departments. Field Service Engineer / Water Treatment Engineer / Service Technician Requirements Proven engineering background, with some electrical experience, with experience working on and around water treatment systems and related components such as pumps, motros, valves, actuators, filters, UV systems, aeration systems, flow meters and instrumentation, chemical dosing systems, control systems, and related components. Water treatment experience is a bonus. Knowledge of reverse osmosis, deionization, and filtration systems is preferred. Experience in field service roles such as Field Service Engineer, Service Engineer, Service Technician, or similar. A full UK driving license is essential. Willingness to travel across the Southwest region and work at various sites. Engineering qualifications are desirable but not essential.
May 18, 2026
Full time
Field Service Engineer / Water Treatment Engineer / Service Technician required to join a leading Water Treatment solutions provider. The successful Field Service Engineer / Water Treatment Engineer / Service Technician will be responsibvle for both Electrical and Mechanical maintenance, servicing, and repair of a variety of water / watewater treatment systems such as, Reverse Osmosis systems, Demineralisation systems, Water Softening Units, Ultrafiltration systems, Electro - Deionisation units, polymer dosing systems, as well as cartridge media and other related wastewater treatment equipment. The Field Service Engineer / Water Treatment Engineer / Service Technician will ideally have an engineering background, with some electrical experience, with experience working on and around water treatment systems and related components such as pumps, motros, valves, actuators, filters, UV systems, aeration systems, flow meters and instrumentation, chemical dosing systems, control systems, and related components. Package 35,000 - 40,000 depending on experience. Company vehicle. Overtime payments. Annual Bonus 25 days + Bank Holidays. Door to Door pay Pension. Additional benefits. Field Service Engineer / Water Treatment Engineer / Service Technician Role Be responsibvle for both Electrical and Mechanical maintenance, servicing, and repair of a variety of water / watewater treatment systems such as, Reverse Osmosis systems, Demineralisation systems, Water Softening Units, Ultrafiltration systems, Electro - Deionisation units, polymer dosing systems, as well as cartridge media and other related wastewater treatment equipment. Willingness to cover the South West of the UK, remotley. Working on a range of water / wastewater treatment systems, and related products. Support Installation, calibration, maintenance and verification of systems. Liaise with various engineering departments. Field Service Engineer / Water Treatment Engineer / Service Technician Requirements Proven engineering background, with some electrical experience, with experience working on and around water treatment systems and related components such as pumps, motros, valves, actuators, filters, UV systems, aeration systems, flow meters and instrumentation, chemical dosing systems, control systems, and related components. Water treatment experience is a bonus. Knowledge of reverse osmosis, deionization, and filtration systems is preferred. Experience in field service roles such as Field Service Engineer, Service Engineer, Service Technician, or similar. A full UK driving license is essential. Willingness to travel across the Southwest region and work at various sites. Engineering qualifications are desirable but not essential.
Shift Electrical Maintenance Engineer Location: Horsham, West Sussex, United Kingdom Position Type: Full-Time - Permanent Shift Pattern: 4 on 4 off (2 days, 2 nights and 4 off) 06:30 - 18:30 & 18:30 - 06:30) Overview An excellent opportunity has arisen for an experienced Shift Electrical Maintenance Engineer to join a well-established industrial operation. The successful candidate will be responsible for ensuring high levels of plant availability through effective planned preventative maintenance, reactive maintenance, fault diagnosis, and continuous improvement initiatives. This role requires a proactive engineer with strong electrical maintenance experience in industrial, manufacturing, or automated environments, capable of maintaining high engineering, safety, and compliance standards. Key Responsibilities Carry out planned preventative maintenance and reactive breakdown repairs on plant equipment Diagnose and rectify electrical faults across motors, sensors, relays, contactors, control panels, and associated systems Conduct electrical and mechanical fault-finding on industrial machinery Support continuous improvement and engineering project work Work with control and instrumentation systems, including temperature sensors, pressure transducers, and flow meters Read and interpret electrical schematics, panel layouts, and technical drawings Troubleshoot PLC hardware faults, ideally with Siemens S7 exposure Maintain high housekeeping, health & safety, and operational compliance standards Report accidents, incidents, and near misses in accordance with company procedures Candidate Requirements HNC in Electrical / Electronic Engineering or equivalent qualification Strong experience in electrical maintenance within industrial, manufacturing, or automated environments Competence in electrical fault diagnosis and maintenance of industrial systems Experience working with MCC panels, motors, drives, and instrumentation systems PLC fault-finding experience preferred BSth Edition qualification advantageous Strong commitment to safety, reliability, and engineering best practice Guidant, Carbon60, Lorien & SRG - The Impellam Group Portfolio are acting as an Employment Business in relation to this vacancy.
May 18, 2026
Full time
Shift Electrical Maintenance Engineer Location: Horsham, West Sussex, United Kingdom Position Type: Full-Time - Permanent Shift Pattern: 4 on 4 off (2 days, 2 nights and 4 off) 06:30 - 18:30 & 18:30 - 06:30) Overview An excellent opportunity has arisen for an experienced Shift Electrical Maintenance Engineer to join a well-established industrial operation. The successful candidate will be responsible for ensuring high levels of plant availability through effective planned preventative maintenance, reactive maintenance, fault diagnosis, and continuous improvement initiatives. This role requires a proactive engineer with strong electrical maintenance experience in industrial, manufacturing, or automated environments, capable of maintaining high engineering, safety, and compliance standards. Key Responsibilities Carry out planned preventative maintenance and reactive breakdown repairs on plant equipment Diagnose and rectify electrical faults across motors, sensors, relays, contactors, control panels, and associated systems Conduct electrical and mechanical fault-finding on industrial machinery Support continuous improvement and engineering project work Work with control and instrumentation systems, including temperature sensors, pressure transducers, and flow meters Read and interpret electrical schematics, panel layouts, and technical drawings Troubleshoot PLC hardware faults, ideally with Siemens S7 exposure Maintain high housekeeping, health & safety, and operational compliance standards Report accidents, incidents, and near misses in accordance with company procedures Candidate Requirements HNC in Electrical / Electronic Engineering or equivalent qualification Strong experience in electrical maintenance within industrial, manufacturing, or automated environments Competence in electrical fault diagnosis and maintenance of industrial systems Experience working with MCC panels, motors, drives, and instrumentation systems PLC fault-finding experience preferred BSth Edition qualification advantageous Strong commitment to safety, reliability, and engineering best practice Guidant, Carbon60, Lorien & SRG - The Impellam Group Portfolio are acting as an Employment Business in relation to this vacancy.
Multi-Skilled Maintenance Technician Location: Middlesbrough (On-site) Shift Pattern: 4 on / 4 off An international manufacturer within the Food / FMCG sector is seeking a Multi-Skilled Maintenance Technician to join its engineering team at a high-performing production facility in Middlesbrough. This is an excellent opportunity to work within a fast-paced manufacturing environment where safety, quality, and operational efficiency are central to business success. The Role Reporting to the Engineering Manager, you will play a key role in maintaining the reliability and performance of automated production equipment. The position involves responding to plant breakdowns, delivering planned preventative maintenance (PPM), and supporting continuous improvement across the site. Key Responsibilities Respond quickly and effectively to plant breakdowns to minimise downtime Deliver planned preventative maintenance activities across production equipment Maintain high standards of health & safety, hygiene, and product integrity Ensure equipment and processes support consistent product quality Work collaboratively with production and engineering teams to maintain operational performance Support continuous improvement initiatives and drive operational efficiencies Maintain clear communication across departments to support production targets About You Electrical and/or mechanical qualification or time-served apprenticeship At least 2 years' experience working in a Food, FMCG, or automated production environment Strong fault-finding and problem-solving skills Good written and verbal communication skills Basic IT skills including Microsoft Office Desirable Skills Knowledge of PLC systems, pneumatics, hydraulics, instrumentation, and temperature control Experience working with automated production or packaging equipment Basic Food Hygiene and Health & Safety awareness Welding or fabrication experience beneficial What's on Offer Opportunity to develop your career within a large global Food / FMCG manufacturer Ongoing training and career development opportunities Competitive salary and benefits package Pension scheme Health plan Staff discount programmes Generous family leave policies
May 18, 2026
Full time
Multi-Skilled Maintenance Technician Location: Middlesbrough (On-site) Shift Pattern: 4 on / 4 off An international manufacturer within the Food / FMCG sector is seeking a Multi-Skilled Maintenance Technician to join its engineering team at a high-performing production facility in Middlesbrough. This is an excellent opportunity to work within a fast-paced manufacturing environment where safety, quality, and operational efficiency are central to business success. The Role Reporting to the Engineering Manager, you will play a key role in maintaining the reliability and performance of automated production equipment. The position involves responding to plant breakdowns, delivering planned preventative maintenance (PPM), and supporting continuous improvement across the site. Key Responsibilities Respond quickly and effectively to plant breakdowns to minimise downtime Deliver planned preventative maintenance activities across production equipment Maintain high standards of health & safety, hygiene, and product integrity Ensure equipment and processes support consistent product quality Work collaboratively with production and engineering teams to maintain operational performance Support continuous improvement initiatives and drive operational efficiencies Maintain clear communication across departments to support production targets About You Electrical and/or mechanical qualification or time-served apprenticeship At least 2 years' experience working in a Food, FMCG, or automated production environment Strong fault-finding and problem-solving skills Good written and verbal communication skills Basic IT skills including Microsoft Office Desirable Skills Knowledge of PLC systems, pneumatics, hydraulics, instrumentation, and temperature control Experience working with automated production or packaging equipment Basic Food Hygiene and Health & Safety awareness Welding or fabrication experience beneficial What's on Offer Opportunity to develop your career within a large global Food / FMCG manufacturer Ongoing training and career development opportunities Competitive salary and benefits package Pension scheme Health plan Staff discount programmes Generous family leave policies
Controls & Automation Engineer 45,000 - 55,000 + Bonus + Excellent Benefits + Early Finish Fridays + Relocation Support Are you an experienced Controls & Automation Engineer looking for a hands-on role where you can make a real impact? This is an exciting opportunity to join a high-performing engineering team, working on a complex, 24/7 operational site where no two days are the same. This role combines technical problem-solving, project work, and leadership - giving you the chance to drive improvements, mentor others and play a key role in keeping operations running smoothly. What You'll Be Doing You'll be at the heart of operations, responsible for maintaining and improving control systems to minimise downtime and maximise performance. Your responsibilities will include: Troubleshooting and resolving complex control system issues Maintaining and enhancing PLC, HMI, and SCADA systems Leading and delivering engineering and automation projects Supporting site operations and ensuring rapid recovery from breakdowns Driving continuous improvement across control systems and equipment Managing contractors and working closely with internal teams Mentoring and coaching engineers, technicians, and apprentices What We're Looking For We're looking for someone who combines strong technical expertise with a proactive, problem-solving mindset. Essential: Electrical and instrumentation knowledge Experience with PLC, HMI and SCADA systems PLC programming skills HND (or higher) in an engineering discipline Strong verbal and written communication skills Desirable: Experience in a COMAH or heavy industrial environment Understanding of health, safety and environmental legislation Leadership, mentoring or coaching experience What You'll Get in Return 45,000 - 55,000 salary Bonus scheme (up to 2x target) 24-hour responsibility payment ( 3,150 per annum) 25 days annual leave plus 8 public holidays Company pension contribution (4%-9%) Life assurance (6x salary) Private medical insurance or healthcare cash plan plus dental scheme Onsite gym and wellbeing initiatives Employee Assistance Programme Education support grant ( 1,000 per child in university, paid annually) Cycle to Work scheme Employee rewards, recognition and discount programmes Additional benefits: Sign-on bonus (equivalent to one month's salary) Relocation support up to 8,000 Three months' rent covered Working Hours Monday to Thursday: 7:30am - 4:00pm Friday: 7:30am - 12:30pm (early finish every week) How to Apply: To apply for the role of Controls & Automation Engineer, please submit your CV direct for review or reach out to Georgie Ireland at E3 Recruitment for more information.
May 16, 2026
Full time
Controls & Automation Engineer 45,000 - 55,000 + Bonus + Excellent Benefits + Early Finish Fridays + Relocation Support Are you an experienced Controls & Automation Engineer looking for a hands-on role where you can make a real impact? This is an exciting opportunity to join a high-performing engineering team, working on a complex, 24/7 operational site where no two days are the same. This role combines technical problem-solving, project work, and leadership - giving you the chance to drive improvements, mentor others and play a key role in keeping operations running smoothly. What You'll Be Doing You'll be at the heart of operations, responsible for maintaining and improving control systems to minimise downtime and maximise performance. Your responsibilities will include: Troubleshooting and resolving complex control system issues Maintaining and enhancing PLC, HMI, and SCADA systems Leading and delivering engineering and automation projects Supporting site operations and ensuring rapid recovery from breakdowns Driving continuous improvement across control systems and equipment Managing contractors and working closely with internal teams Mentoring and coaching engineers, technicians, and apprentices What We're Looking For We're looking for someone who combines strong technical expertise with a proactive, problem-solving mindset. Essential: Electrical and instrumentation knowledge Experience with PLC, HMI and SCADA systems PLC programming skills HND (or higher) in an engineering discipline Strong verbal and written communication skills Desirable: Experience in a COMAH or heavy industrial environment Understanding of health, safety and environmental legislation Leadership, mentoring or coaching experience What You'll Get in Return 45,000 - 55,000 salary Bonus scheme (up to 2x target) 24-hour responsibility payment ( 3,150 per annum) 25 days annual leave plus 8 public holidays Company pension contribution (4%-9%) Life assurance (6x salary) Private medical insurance or healthcare cash plan plus dental scheme Onsite gym and wellbeing initiatives Employee Assistance Programme Education support grant ( 1,000 per child in university, paid annually) Cycle to Work scheme Employee rewards, recognition and discount programmes Additional benefits: Sign-on bonus (equivalent to one month's salary) Relocation support up to 8,000 Three months' rent covered Working Hours Monday to Thursday: 7:30am - 4:00pm Friday: 7:30am - 12:30pm (early finish every week) How to Apply: To apply for the role of Controls & Automation Engineer, please submit your CV direct for review or reach out to Georgie Ireland at E3 Recruitment for more information.
Electrical Technician Monday - Friday DaysStarting basic up to £43,000 (rising after probation) + Overtime + Allowances + HealthcareLocation: Clevedon, SomersetCommutable from: Bristol, Weston-super-Mare, Portishead, Yatton, Cheddar, Bridgwater Are you an Electrical Bias Engineer or Field Service Engineer looking for something a bit different from the standard factory maintenance environment? Yolk Recruitment are supporting a specialist engineering business working at the forefront of their sector. This is an opportunity to join a massively growing engineering company who work across industrial, pharmaceutical, chemical and infrastructure sectors throughout the UK and Europe. The role offers a genuine mix of workshop engineering in Clevedon, as well as the opportunty to work across customer sites on site installation and commissioning work, making it ideal for somebody who enjoys variety, problem-solving and practical hands-on engineering. This is what you'll be doing: As an Electrical Bias Engineer, you'll be involved in the build, installation, commissioning and fault-finding of specialist systems both within the workshop and at customer sites. The role is roughly 50/50 split between workshop-based work and travelling to customer siteswhere you will be fully expnesed and receive additional allowances for. You'll be working on: Motors, pumps and valves Control panels and electrical installations PLC-controlled equipment Instrumentation and sensors Cable installation and site wiring Modular process and filtration systems Fault-finding and commissioning activities Electrical: Confident reading and interpreting electrical schematics and technical drawings Safe isolation, testing and fault-finding using multimeters Working on 3-phase systems, motors, drives, relays and control panels Electrical installation and commissioning work across workshop and customer sites PLC fault-finding focused around I/O checks, diagnostics and system support rather than major software modifications Mechanical: Working with pumps, pipework, valves and process systems Exposure to hydraulic and pneumatic systems would be beneficial What you'll need to succeed: Background within maintenance engineering, field service, installation or commissioning Heavy Electrical bias with practical fault-finding experience Comfortable travelling to customer sites when required Ability to read schematics and technical drawings Strong hands-on engineering mindset and willingness to get involved across both electrical and mechanical work The business are particularly interested in engineers from backgrounds such as: Electrical Maintenance Engineer Field Service Engineer Electrical Installation Engineer Commissioning Engineer Multi-Skilled Maintenance Engineer And this is what you'll get in return: Starting salary up to £43,000 with progression after probation Enhanced overtime rates Additional daily travel allowances Healthcare package Regular salary reviews Monday to Friday days role Long-term progression within a growing specialist engineering sector Opportunity to work on varied UK and European projects This is an excellent opportunity to move into a growing engineering sector with strong long-term demand, varied engineering work and genuine development opportunities. Are you up to the challenge? If you're an electrically biased engineer looking for a hands-on role with variety, travel and specialist project work, apply today. Please note, whilst we do our best to contact all applicants, due to the volume of applications we cannot guarantee feedback to every candidate. If you have not heard from us within 7 days, unfortunately your application has not been successful on this occasion.
May 15, 2026
Full time
Electrical Technician Monday - Friday DaysStarting basic up to £43,000 (rising after probation) + Overtime + Allowances + HealthcareLocation: Clevedon, SomersetCommutable from: Bristol, Weston-super-Mare, Portishead, Yatton, Cheddar, Bridgwater Are you an Electrical Bias Engineer or Field Service Engineer looking for something a bit different from the standard factory maintenance environment? Yolk Recruitment are supporting a specialist engineering business working at the forefront of their sector. This is an opportunity to join a massively growing engineering company who work across industrial, pharmaceutical, chemical and infrastructure sectors throughout the UK and Europe. The role offers a genuine mix of workshop engineering in Clevedon, as well as the opportunty to work across customer sites on site installation and commissioning work, making it ideal for somebody who enjoys variety, problem-solving and practical hands-on engineering. This is what you'll be doing: As an Electrical Bias Engineer, you'll be involved in the build, installation, commissioning and fault-finding of specialist systems both within the workshop and at customer sites. The role is roughly 50/50 split between workshop-based work and travelling to customer siteswhere you will be fully expnesed and receive additional allowances for. You'll be working on: Motors, pumps and valves Control panels and electrical installations PLC-controlled equipment Instrumentation and sensors Cable installation and site wiring Modular process and filtration systems Fault-finding and commissioning activities Electrical: Confident reading and interpreting electrical schematics and technical drawings Safe isolation, testing and fault-finding using multimeters Working on 3-phase systems, motors, drives, relays and control panels Electrical installation and commissioning work across workshop and customer sites PLC fault-finding focused around I/O checks, diagnostics and system support rather than major software modifications Mechanical: Working with pumps, pipework, valves and process systems Exposure to hydraulic and pneumatic systems would be beneficial What you'll need to succeed: Background within maintenance engineering, field service, installation or commissioning Heavy Electrical bias with practical fault-finding experience Comfortable travelling to customer sites when required Ability to read schematics and technical drawings Strong hands-on engineering mindset and willingness to get involved across both electrical and mechanical work The business are particularly interested in engineers from backgrounds such as: Electrical Maintenance Engineer Field Service Engineer Electrical Installation Engineer Commissioning Engineer Multi-Skilled Maintenance Engineer And this is what you'll get in return: Starting salary up to £43,000 with progression after probation Enhanced overtime rates Additional daily travel allowances Healthcare package Regular salary reviews Monday to Friday days role Long-term progression within a growing specialist engineering sector Opportunity to work on varied UK and European projects This is an excellent opportunity to move into a growing engineering sector with strong long-term demand, varied engineering work and genuine development opportunities. Are you up to the challenge? If you're an electrically biased engineer looking for a hands-on role with variety, travel and specialist project work, apply today. Please note, whilst we do our best to contact all applicants, due to the volume of applications we cannot guarantee feedback to every candidate. If you have not heard from us within 7 days, unfortunately your application has not been successful on this occasion.
Working on behalf of our client based on Isle of Grain. We are currently recruiting for a C&I Technician on a permanent basis. This is an excellent opportunity for a skilled professional with a strong background in control and instrumentation within an industrial or process environment. Key Duties: Carry out fault finding and rectification on electrical equipment Perform breakdown repairs and reactive click apply for full job details
May 15, 2026
Full time
Working on behalf of our client based on Isle of Grain. We are currently recruiting for a C&I Technician on a permanent basis. This is an excellent opportunity for a skilled professional with a strong background in control and instrumentation within an industrial or process environment. Key Duties: Carry out fault finding and rectification on electrical equipment Perform breakdown repairs and reactive click apply for full job details
One of our clients, a global leader within their industry, is looking for an E&I Technician to join their operations in maintaining and repairing complex machinery in an industrial setting. The ideal candidate will have a strong background in electrical work or a multi-skill engineer with Electrical bias experience. Our client is hiring for two positions, hence the broad salary range given. Duties Install, maintain, and repair valves, probes, sensors and other such instruments in industrial environments Troubleshoot instrumentation issues using appropriate testing devices Read and interpret electrical blueprints and technical diagrams Perform preventative maintenance on systems to ensure efficiency and safety Fault finding in valves, sensors, mass flow meters Collaborate with other team members to complete projects efficiently and according to HSE standards Experience Proven experience as an Instrumentation Technician, 18th Edition Knowledge of electrical systems and components Experience in Hazardous environments, Atex, Compex, Comah a big plus Proficient in using power tools and hand tools for electrical work Ability to work independently and as part of a team Excellent problem-solving skills and attention to detail
May 12, 2026
Full time
One of our clients, a global leader within their industry, is looking for an E&I Technician to join their operations in maintaining and repairing complex machinery in an industrial setting. The ideal candidate will have a strong background in electrical work or a multi-skill engineer with Electrical bias experience. Our client is hiring for two positions, hence the broad salary range given. Duties Install, maintain, and repair valves, probes, sensors and other such instruments in industrial environments Troubleshoot instrumentation issues using appropriate testing devices Read and interpret electrical blueprints and technical diagrams Perform preventative maintenance on systems to ensure efficiency and safety Fault finding in valves, sensors, mass flow meters Collaborate with other team members to complete projects efficiently and according to HSE standards Experience Proven experience as an Instrumentation Technician, 18th Edition Knowledge of electrical systems and components Experience in Hazardous environments, Atex, Compex, Comah a big plus Proficient in using power tools and hand tools for electrical work Ability to work independently and as part of a team Excellent problem-solving skills and attention to detail
Job Title: Electrical and Multi- Skilled Technician Location: Royston, UK & Enfield, North London (site based) 1 Multi Skilled Technician (M&E)- Day shift, Monday- Friday - Salary: £45,589 plus free lunch, discretionary bonus and benefits 2 Electrical Engineer's - 24/7 shift - Salary £ 44,113.00 + 35% shift allowance + lunch allowance = £60,345.05 1 Instrument Technician - 24/7 shift - Salary £43,765.00 % shift allowance + lunch allowance = £59,875.25 World-changing careers, enabled by Johnson Matthey. With more than 200 years history, join us and help to accelerate the transition to net-zero! As an Electrical Technician, you'll contribute to JM's mission as a world leader in sustainable technology, transforming energy and reducing carbon emissions for a cleaner, brighter future. Here at JM, we are hiring Electrical, Instrument and Multi skilled Technician's to join our PGMS business. Platinum Group Metal Services (PGMS) is one of four businesses within the Efficient Natural Resources Sector that manages, distributes, refines and recycles precious metals and fabricates products using precious metals and related materials. The business unit also manufactures platinum group metals, minor metal compounds, organometallics and fine metal powders for high technology applications, as well as providing a range of management services for platinum group metals. The role: As an Electrical Technician, you will help drive our goals by: Safety should always be the highest priority for any tasks undertaken, in conjunction with our life saving policies and procedures Use of technical drawings & operator manuals alongside electrical schematic drawings & P&ID's to aid fault diagnosis process Reduce Plant downtime by proposing/implementing improvements in both the Electrical and instrumentation facets of the role Contribute to improving the site performance in all aspects of safe operation, regulatory compliance, productive output and cost efficiency by improving the engineering reliability of site equipment and ensuring appropriate maintenance frequency of assets is complied with and keep accurate written records of work carried out using SAP CMMS system Work alongside compliance & technical author to support the technical review of written maintenance documents and operational procedures Conducting Inspections, testing, calibration, adjustments and monitoring tasks as required to maintain efficient plant and build-in equipment reliability Key skills that will help you succeed in this role: An industrial Electrical and Instrumentation -based qualification to HNC/ONC level or equivalent Time served Apprenticeship with a further 5 years' experience Previous Manufacturing/Chemical industry experience Experience of structured problem-solving techniques, fault diagnosis What we offer: We make sure salaries are fair, competitive and aligned to individual roles, experience and responsibilities. We are also supportive of hybrid and flexible working and where applicable, offer life, medical and other benefits that support our employees' financial and physical wellbeing, such as: Retirement savings Share plans Saving accounts House saving funds Life and disability insurance Commuter allowances and loans Medical plans / health assessments Fitness discounts Ready to make a meaningful impact on your career and the environment? Join us and help shape a sustainable future while advancing your career! At JM, inclusivity is central to our values. We create an environment where everyone can thrive, embracing diverse perspectives to tackle challenges and ensure all colleagues feel valued and connected. For any queries or accessibility requirements, please contact (url removed). We will work with you to make suitable adjustments at any stage of the recruitment process. All conversations are confidential, and your feedback is welcome to help us provide an accessible and positive recruitment experience. Closing date for applications: This job advertisement will be posted for a minimum of 2 weeks, early application is advised. To submit your application, please click the "Apply" button online. All applications are carefully considered and your details will be stored on our secure Application Management System. This is used throughout Johnson Matthey for the selection of suitable candidates for our vacancies as they arise.Johnson Matthey respects your privacy and is committed to protecting your personal information. For more information about how your personal data is used please view our privacy notice: Johnson Matthey Privacy Notice . By applying for this role and creating an account you are agreeing to the notice. Johnson Matthey Plc is an equal opportunities employer and positively encourages applications from suitably qualified and eligible candidates regardless of sex, race, disability, age, sexual orientation, marriage or civil partnership, pregnancy or maternity, religion or belief.
May 12, 2026
Full time
Job Title: Electrical and Multi- Skilled Technician Location: Royston, UK & Enfield, North London (site based) 1 Multi Skilled Technician (M&E)- Day shift, Monday- Friday - Salary: £45,589 plus free lunch, discretionary bonus and benefits 2 Electrical Engineer's - 24/7 shift - Salary £ 44,113.00 + 35% shift allowance + lunch allowance = £60,345.05 1 Instrument Technician - 24/7 shift - Salary £43,765.00 % shift allowance + lunch allowance = £59,875.25 World-changing careers, enabled by Johnson Matthey. With more than 200 years history, join us and help to accelerate the transition to net-zero! As an Electrical Technician, you'll contribute to JM's mission as a world leader in sustainable technology, transforming energy and reducing carbon emissions for a cleaner, brighter future. Here at JM, we are hiring Electrical, Instrument and Multi skilled Technician's to join our PGMS business. Platinum Group Metal Services (PGMS) is one of four businesses within the Efficient Natural Resources Sector that manages, distributes, refines and recycles precious metals and fabricates products using precious metals and related materials. The business unit also manufactures platinum group metals, minor metal compounds, organometallics and fine metal powders for high technology applications, as well as providing a range of management services for platinum group metals. The role: As an Electrical Technician, you will help drive our goals by: Safety should always be the highest priority for any tasks undertaken, in conjunction with our life saving policies and procedures Use of technical drawings & operator manuals alongside electrical schematic drawings & P&ID's to aid fault diagnosis process Reduce Plant downtime by proposing/implementing improvements in both the Electrical and instrumentation facets of the role Contribute to improving the site performance in all aspects of safe operation, regulatory compliance, productive output and cost efficiency by improving the engineering reliability of site equipment and ensuring appropriate maintenance frequency of assets is complied with and keep accurate written records of work carried out using SAP CMMS system Work alongside compliance & technical author to support the technical review of written maintenance documents and operational procedures Conducting Inspections, testing, calibration, adjustments and monitoring tasks as required to maintain efficient plant and build-in equipment reliability Key skills that will help you succeed in this role: An industrial Electrical and Instrumentation -based qualification to HNC/ONC level or equivalent Time served Apprenticeship with a further 5 years' experience Previous Manufacturing/Chemical industry experience Experience of structured problem-solving techniques, fault diagnosis What we offer: We make sure salaries are fair, competitive and aligned to individual roles, experience and responsibilities. We are also supportive of hybrid and flexible working and where applicable, offer life, medical and other benefits that support our employees' financial and physical wellbeing, such as: Retirement savings Share plans Saving accounts House saving funds Life and disability insurance Commuter allowances and loans Medical plans / health assessments Fitness discounts Ready to make a meaningful impact on your career and the environment? Join us and help shape a sustainable future while advancing your career! At JM, inclusivity is central to our values. We create an environment where everyone can thrive, embracing diverse perspectives to tackle challenges and ensure all colleagues feel valued and connected. For any queries or accessibility requirements, please contact (url removed). We will work with you to make suitable adjustments at any stage of the recruitment process. All conversations are confidential, and your feedback is welcome to help us provide an accessible and positive recruitment experience. Closing date for applications: This job advertisement will be posted for a minimum of 2 weeks, early application is advised. To submit your application, please click the "Apply" button online. All applications are carefully considered and your details will be stored on our secure Application Management System. This is used throughout Johnson Matthey for the selection of suitable candidates for our vacancies as they arise.Johnson Matthey respects your privacy and is committed to protecting your personal information. For more information about how your personal data is used please view our privacy notice: Johnson Matthey Privacy Notice . By applying for this role and creating an account you are agreeing to the notice. Johnson Matthey Plc is an equal opportunities employer and positively encourages applications from suitably qualified and eligible candidates regardless of sex, race, disability, age, sexual orientation, marriage or civil partnership, pregnancy or maternity, religion or belief.
Title: EC&I Technician Location: Hampshire Duration: Permanent Our client is looking for an EC&I Technician to support the safe, efficient, and reliable operation of the plant by delivering high-quality maintenance and technical support across all EC&I systems. Responsibilities: Provide expert EC&I maintenance support to maximise plant availability and operational efficiency. Advise management on safety issues and support continuous improvement of safety performance. Conduct risk assessments and prepare method statements for both routine and defect-based maintenance tasks. Perform planned maintenance (PM) inspections on all safety instrumented systems. Respond to breakdowns and carry out routine maintenance tasks as required. Maintain high standards of housekeeping and operational discipline in all work areas. Assist with planning and execution of plant maintenance shutdowns. Recommend system modifications or maintenance enhancements to improve performance and reliability. Requirements: Strong background in Electrical, Control & Instrumentation maintenance . CompEx certified with proven experience in hazardous area working practices. Hands-on experience with DCS, ESD, and PLC-based control systems .
Oct 09, 2025
Full time
Title: EC&I Technician Location: Hampshire Duration: Permanent Our client is looking for an EC&I Technician to support the safe, efficient, and reliable operation of the plant by delivering high-quality maintenance and technical support across all EC&I systems. Responsibilities: Provide expert EC&I maintenance support to maximise plant availability and operational efficiency. Advise management on safety issues and support continuous improvement of safety performance. Conduct risk assessments and prepare method statements for both routine and defect-based maintenance tasks. Perform planned maintenance (PM) inspections on all safety instrumented systems. Respond to breakdowns and carry out routine maintenance tasks as required. Maintain high standards of housekeeping and operational discipline in all work areas. Assist with planning and execution of plant maintenance shutdowns. Recommend system modifications or maintenance enhancements to improve performance and reliability. Requirements: Strong background in Electrical, Control & Instrumentation maintenance . CompEx certified with proven experience in hazardous area working practices. Hands-on experience with DCS, ESD, and PLC-based control systems .
Highfield Professional Solutions Ltd
Seascale, Cumbria
Commissioning Engineer (EC&I) - Sellafield Site Location: Sellafield, Cumbria Pay: Up to 50 per hour (Inside IR35) Contract: Full-time, site-based (4 on 4 off rotation or standard site hours) Start Date: ASAP Duration: Until June 2026 About the Role We're seeking an experienced Commissioning Engineer (EC&I) to join the team at Sellafield . This position plays a vital role in ensuring the safe, compliant, and efficient commissioning of control, instrumentation, and electrical systems within one of the UK's most complex and highly regulated industrial environments. Key Responsibilities Witness and verify vendor testing at works test stage. Prepare plant commissioning test specifications. Conduct early inspections of site installations to support timely system handovers. Execute testing activities during the Integrated Plant Commissioning phase. Identify faults, propose solutions, and implement corrective actions. Coordinate commissioning technicians and support resources. Initiate and manage Field Observation Books (FOBs). Validate working-level instructions and ensure accurate application and removal of temporary commissioning aids. Essential Experience & Qualifications Proven experience in nuclear EC&I systems commissioning . Background in highly regulated industries - nuclear experience essential , Sellafield experience preferable . Minimum HNC/HND in an Engineering discipline (or equivalent). Competent in Microsoft Office and Excel-based calculations. Familiarity with project management principles (APM membership desirable). IOSH Working or Managing Safely , SMSTS or SSSTS , and valid ECS Supervisory Card required. Must be able to obtain BPSS security clearance . Why Join Be part of a nationally significant project at Sellafield . Competitive pay - up to 50 per hour (Inside IR35) . Flexible working options - 4 on 4 off rotation or standard site hours . Immediate start available.
Oct 08, 2025
Contractor
Commissioning Engineer (EC&I) - Sellafield Site Location: Sellafield, Cumbria Pay: Up to 50 per hour (Inside IR35) Contract: Full-time, site-based (4 on 4 off rotation or standard site hours) Start Date: ASAP Duration: Until June 2026 About the Role We're seeking an experienced Commissioning Engineer (EC&I) to join the team at Sellafield . This position plays a vital role in ensuring the safe, compliant, and efficient commissioning of control, instrumentation, and electrical systems within one of the UK's most complex and highly regulated industrial environments. Key Responsibilities Witness and verify vendor testing at works test stage. Prepare plant commissioning test specifications. Conduct early inspections of site installations to support timely system handovers. Execute testing activities during the Integrated Plant Commissioning phase. Identify faults, propose solutions, and implement corrective actions. Coordinate commissioning technicians and support resources. Initiate and manage Field Observation Books (FOBs). Validate working-level instructions and ensure accurate application and removal of temporary commissioning aids. Essential Experience & Qualifications Proven experience in nuclear EC&I systems commissioning . Background in highly regulated industries - nuclear experience essential , Sellafield experience preferable . Minimum HNC/HND in an Engineering discipline (or equivalent). Competent in Microsoft Office and Excel-based calculations. Familiarity with project management principles (APM membership desirable). IOSH Working or Managing Safely , SMSTS or SSSTS , and valid ECS Supervisory Card required. Must be able to obtain BPSS security clearance . Why Join Be part of a nationally significant project at Sellafield . Competitive pay - up to 50 per hour (Inside IR35) . Flexible working options - 4 on 4 off rotation or standard site hours . Immediate start available.
This role is to support the operations, ongoing engineering development and maintenance of the QMRE Pyrolysis Facility near Hoo, Rochester (the Plant), with the intention that the plant is maintained and operated to the highest possible performance, quality, health and safety, and environmental standards. These requirements necessitate a flexible and adaptive working approach both to developing solutions to challenges and working patterns. Responsibilities and accountabilities: To take direction from the Site Operations Manager as to the work needed and timelines required. Undertake all required work activities ensuring that tasks are prioritised and completed in a timely way to ensure that the plants schedules are fully met. Ensure that works are undertaken in accordance with safe methods of work, using standard operating procedures, correct PPE, and safety assessments, and help develop these safe methods of work where they do not exist. Support the Site Operations Manager with plant performance issues and resolutions Full understanding of the QMRE process and good understanding of the SCADA control system. Support plant maintenance activities. Update and maintain accurate records, including audits, inspections, calibration records, plant operations data, turnaround data, documents and drawings relating to the plant. Collating and logging all information appropriately as agreed. Take personal responsibility for the quality and completion of the work tasks given to the Operations team. Preparation of and recording quantities of all materials needed (inc. chemicals, gases, feedstocks, etc.), reporting any deficiencies in a timely manner to permit early resolution. Recording quantities of all products & waste materials produced, co-ordinating with the Site Operations Manager for their safe storage and removal. Assist in ensuring skills and competence are relevant by undertaking, and applying, suitable training and development. Be able to assess the need for and correctly apply plant isolations. Prepare and issue permits to work covering all relevant works. Contribute to the engineering design, development and implementation of new and existing equipment, and comply with the needs of the change management process for the plant. Participate in safety assessments and meetings (e.g. Hazop and risk assessments) relating to plant modifications, additions etc. Ensure the working environment is safe and in a clean condition, including organising periodic cleaning of operational and welfare areas. Use of the stock management system to ensure that key stocks and consumables are maintained at appropriate levels, reporting any stock shortage or equipment failures or other deficiencies in a timely manner to permit early resolution. Actively seek and identify opportunities for improvement to plant operations and agree corrective actions with the Site Operations Manager. Lead by example and supervise the Process Technicians day to day activities. Key abilities for job: Essential Ability to work safely, and to ensure the safety of others, complying with all safety assessment requirements. Ability to take a leading role in and champion plant safety, e.g. hazops, risk assessments, use of safety equipment, etc., and participate, where needed, in health and safety meetings. Demonstrated ability to supervise successful and safe plant operations across all conditions, including reporting of trials. Ability to work as part of a team and to work independently. Work flexibly in terms of working patterns, location, and reporting lines, to ensure that the plant is adequately manned at all times, including being on call. To organise, monitor and report the work activities of others. To fully understand the operation and equipment of the QMRE process. Willingness to undertake training to ensure safe operation of equipment (e.g. forklift, compressed gases, CoSHH, etc.). Desirable Ability to use mobile plant (especially forklifts). Ideally experience in similar operational environment. Ideally, Electrical, Instrumentation/Controls or Mechanical qualifications or experience with experience of working with flammable materials.
Oct 07, 2025
Full time
This role is to support the operations, ongoing engineering development and maintenance of the QMRE Pyrolysis Facility near Hoo, Rochester (the Plant), with the intention that the plant is maintained and operated to the highest possible performance, quality, health and safety, and environmental standards. These requirements necessitate a flexible and adaptive working approach both to developing solutions to challenges and working patterns. Responsibilities and accountabilities: To take direction from the Site Operations Manager as to the work needed and timelines required. Undertake all required work activities ensuring that tasks are prioritised and completed in a timely way to ensure that the plants schedules are fully met. Ensure that works are undertaken in accordance with safe methods of work, using standard operating procedures, correct PPE, and safety assessments, and help develop these safe methods of work where they do not exist. Support the Site Operations Manager with plant performance issues and resolutions Full understanding of the QMRE process and good understanding of the SCADA control system. Support plant maintenance activities. Update and maintain accurate records, including audits, inspections, calibration records, plant operations data, turnaround data, documents and drawings relating to the plant. Collating and logging all information appropriately as agreed. Take personal responsibility for the quality and completion of the work tasks given to the Operations team. Preparation of and recording quantities of all materials needed (inc. chemicals, gases, feedstocks, etc.), reporting any deficiencies in a timely manner to permit early resolution. Recording quantities of all products & waste materials produced, co-ordinating with the Site Operations Manager for their safe storage and removal. Assist in ensuring skills and competence are relevant by undertaking, and applying, suitable training and development. Be able to assess the need for and correctly apply plant isolations. Prepare and issue permits to work covering all relevant works. Contribute to the engineering design, development and implementation of new and existing equipment, and comply with the needs of the change management process for the plant. Participate in safety assessments and meetings (e.g. Hazop and risk assessments) relating to plant modifications, additions etc. Ensure the working environment is safe and in a clean condition, including organising periodic cleaning of operational and welfare areas. Use of the stock management system to ensure that key stocks and consumables are maintained at appropriate levels, reporting any stock shortage or equipment failures or other deficiencies in a timely manner to permit early resolution. Actively seek and identify opportunities for improvement to plant operations and agree corrective actions with the Site Operations Manager. Lead by example and supervise the Process Technicians day to day activities. Key abilities for job: Essential Ability to work safely, and to ensure the safety of others, complying with all safety assessment requirements. Ability to take a leading role in and champion plant safety, e.g. hazops, risk assessments, use of safety equipment, etc., and participate, where needed, in health and safety meetings. Demonstrated ability to supervise successful and safe plant operations across all conditions, including reporting of trials. Ability to work as part of a team and to work independently. Work flexibly in terms of working patterns, location, and reporting lines, to ensure that the plant is adequately manned at all times, including being on call. To organise, monitor and report the work activities of others. To fully understand the operation and equipment of the QMRE process. Willingness to undertake training to ensure safe operation of equipment (e.g. forklift, compressed gases, CoSHH, etc.). Desirable Ability to use mobile plant (especially forklifts). Ideally experience in similar operational environment. Ideally, Electrical, Instrumentation/Controls or Mechanical qualifications or experience with experience of working with flammable materials.
We are currently looking for a High Voltage Maintenance Technician for our client based in the East of England. This is a permanent opportunity to join a great company with career prospects. Areas covered will range from Kings Lynn to Southend. Candidates will be placed closest to their home locations. This role will be within the MEICA and capital maintenance- Our Mechanical, Electrical, Instrumentation, Control & Automation (MEICA) experts offer a one-stop solution, including ongoing operation and maintenance services. As the next HV Electrician, you'll work within a small team carrying out the installation, maintenance, and repair of high-voltage (HV) electrical equipment and systems to ensure safety, compliance and operational efficiency. The role involves working in the distribution network sector, supporting asset availability and critical maintenance works. General maintenance routines, periodic testing, inspection and associated remedial works. Installation of power systems on-site and assisting station engineers with reported defects. Installation and maintenance of both AIS and GIS substation equipment. Maintenance of HV equipment such as power transformers (up to 132kV), earth switches, disconnectors, CTs, protection panels, battery chargers, SCADA panels, etc., within new or existing substations to ensure compliance with DNO/IDNO specifications. Installation and maintenance of switchgear from low voltage up to 132kV. Installation of prefabricated steel work and cable containment. Testing and inspection of installations, including cable testing (insulation resistance, continuity), ductor testing, and recording results. Glanding and termination of SWA and multicore cables. Interpreting engineering drawings and specifications to determine assembly requirements. Assembling components using hand tools, power tools, and other necessary equipment. Conducting quality checks on completed assemblies to ensure compliance with standards. Panel wiring following line drawings and core sheets. Ensuring compliance with all health, safety, environment, and quality policies, procedures, and standards at all times. Collaborating with team members to troubleshoot issues. Maintaining a clean and organized work environment, adhering to health and safety regulations. What you'll bring: Proficient in the use of hand tools and power tools for assembly tasks. Strong understanding of safe systems of work within a substation. Excellent attention to detail and ability to follow precise instructions. Strong problem-solving skills and ability to work under pressure. Effective communication skills, both verbal and written, for collaboration with team members. Qualifications: City & Guilds 2339-17 (or equivalent) Level 3 Power Networks Craftsperson Qualification Level 3 in Electrical Engineering Level 3 NVQ Electrical Maintenance (or Installations) BSth Edition Wiring Regulations Additional Qualifications (desirable): Emergency First Aid at Work Confined Space A, B & C certifications EUSR PAF 3a and 3b PASMA Ladder Association Inspector & User certifications Slinger/Sig and Telehandler certifications Staff benefits include: Company van/vehicle and fuel card for business use 25 days annual leave plus bank holidays Recommend a friend - get rewarded for introducing people to us! Matched or contributory pension scheme Employee Assistance Programme My Rewards portal, access to 1000's of retail discounts Life assurance Cycle to work scheme 40 hours per week, Overtime is offered when available.
Oct 07, 2025
Full time
We are currently looking for a High Voltage Maintenance Technician for our client based in the East of England. This is a permanent opportunity to join a great company with career prospects. Areas covered will range from Kings Lynn to Southend. Candidates will be placed closest to their home locations. This role will be within the MEICA and capital maintenance- Our Mechanical, Electrical, Instrumentation, Control & Automation (MEICA) experts offer a one-stop solution, including ongoing operation and maintenance services. As the next HV Electrician, you'll work within a small team carrying out the installation, maintenance, and repair of high-voltage (HV) electrical equipment and systems to ensure safety, compliance and operational efficiency. The role involves working in the distribution network sector, supporting asset availability and critical maintenance works. General maintenance routines, periodic testing, inspection and associated remedial works. Installation of power systems on-site and assisting station engineers with reported defects. Installation and maintenance of both AIS and GIS substation equipment. Maintenance of HV equipment such as power transformers (up to 132kV), earth switches, disconnectors, CTs, protection panels, battery chargers, SCADA panels, etc., within new or existing substations to ensure compliance with DNO/IDNO specifications. Installation and maintenance of switchgear from low voltage up to 132kV. Installation of prefabricated steel work and cable containment. Testing and inspection of installations, including cable testing (insulation resistance, continuity), ductor testing, and recording results. Glanding and termination of SWA and multicore cables. Interpreting engineering drawings and specifications to determine assembly requirements. Assembling components using hand tools, power tools, and other necessary equipment. Conducting quality checks on completed assemblies to ensure compliance with standards. Panel wiring following line drawings and core sheets. Ensuring compliance with all health, safety, environment, and quality policies, procedures, and standards at all times. Collaborating with team members to troubleshoot issues. Maintaining a clean and organized work environment, adhering to health and safety regulations. What you'll bring: Proficient in the use of hand tools and power tools for assembly tasks. Strong understanding of safe systems of work within a substation. Excellent attention to detail and ability to follow precise instructions. Strong problem-solving skills and ability to work under pressure. Effective communication skills, both verbal and written, for collaboration with team members. Qualifications: City & Guilds 2339-17 (or equivalent) Level 3 Power Networks Craftsperson Qualification Level 3 in Electrical Engineering Level 3 NVQ Electrical Maintenance (or Installations) BSth Edition Wiring Regulations Additional Qualifications (desirable): Emergency First Aid at Work Confined Space A, B & C certifications EUSR PAF 3a and 3b PASMA Ladder Association Inspector & User certifications Slinger/Sig and Telehandler certifications Staff benefits include: Company van/vehicle and fuel card for business use 25 days annual leave plus bank holidays Recommend a friend - get rewarded for introducing people to us! Matched or contributory pension scheme Employee Assistance Programme My Rewards portal, access to 1000's of retail discounts Life assurance Cycle to work scheme 40 hours per week, Overtime is offered when available.
Assembly Technician - Scientific Instruments Scientific & Laboratory Instrumentation - Cheshire Crewe, Nantwich, Sandbach, Haslington 26,000 - 28,000 Basic Salary + Overtime Opportunities + Training & Benefits including Healthcare & 10% pension Have you got an electromechanical assembly background? Are you interested in the world of scientific and laboratory equipment? If you've answered yes to both, this could be a brilliant opportunity for you. The Company recruiting for the Assembly Technician : This well-respected manufacturer of laboratory instrumentation works with a wide portfolio of international clients. Their equipment is trusted by well-known leading organisations within the food & drink sector as well more specialist industries including ecology, geotechnical, drug misuse & doping. Having a truly international footprint they are looking to strengthen their in-house technical assembly team. A recent acquisition means there are substantial career opportunities further down the line. Your Role as an Assembly Technician : Based in Crewe and will be responsible for the building and assembly of their bespoke scientific and laboratory equipment. Assembling electrical, mechanical, and electronic components to detailed specifications. Working as part of an experienced team you will be supported and will become a valued member of the company. Conducting tests and troubleshooting on assembled products. Involvement with everything from making wiring harnesses to cabinet assembly. Mon - Fri role working daytime hours. Ideal background for the Assembly Technician Position : You need to have strong electromechanical assembly experience and a genuine practical interest. Ideally you will have experience reading engineering / technical drawings and schematics. Strong eye for detail, great practical, technical & problem-solving ability. Experience with soldering, crimping, and mechanical assembly. Able to commute daily to the Crewe facility. Right to work in the UK indefinitely as sponsorship won't be provided. The Package for the Assembly Technician : 26,000 - 28,000 basic salary, depending on experience. Overtime opportunities available. Ongoing training. Competitive benefits package - including 10% pension & healthcare. 25 days holiday + stats. Please apply for this job online if you are interested and feel you fit the above criteria. Dave is the main point of contact for the role. INDENG
Oct 07, 2025
Full time
Assembly Technician - Scientific Instruments Scientific & Laboratory Instrumentation - Cheshire Crewe, Nantwich, Sandbach, Haslington 26,000 - 28,000 Basic Salary + Overtime Opportunities + Training & Benefits including Healthcare & 10% pension Have you got an electromechanical assembly background? Are you interested in the world of scientific and laboratory equipment? If you've answered yes to both, this could be a brilliant opportunity for you. The Company recruiting for the Assembly Technician : This well-respected manufacturer of laboratory instrumentation works with a wide portfolio of international clients. Their equipment is trusted by well-known leading organisations within the food & drink sector as well more specialist industries including ecology, geotechnical, drug misuse & doping. Having a truly international footprint they are looking to strengthen their in-house technical assembly team. A recent acquisition means there are substantial career opportunities further down the line. Your Role as an Assembly Technician : Based in Crewe and will be responsible for the building and assembly of their bespoke scientific and laboratory equipment. Assembling electrical, mechanical, and electronic components to detailed specifications. Working as part of an experienced team you will be supported and will become a valued member of the company. Conducting tests and troubleshooting on assembled products. Involvement with everything from making wiring harnesses to cabinet assembly. Mon - Fri role working daytime hours. Ideal background for the Assembly Technician Position : You need to have strong electromechanical assembly experience and a genuine practical interest. Ideally you will have experience reading engineering / technical drawings and schematics. Strong eye for detail, great practical, technical & problem-solving ability. Experience with soldering, crimping, and mechanical assembly. Able to commute daily to the Crewe facility. Right to work in the UK indefinitely as sponsorship won't be provided. The Package for the Assembly Technician : 26,000 - 28,000 basic salary, depending on experience. Overtime opportunities available. Ongoing training. Competitive benefits package - including 10% pension & healthcare. 25 days holiday + stats. Please apply for this job online if you are interested and feel you fit the above criteria. Dave is the main point of contact for the role. INDENG
Production Technician - Scientific Instruments Scientific & Laboratory Instrumentation - Cheshire Crewe, Nantwich, Sandbach, Haslington 26,000 - 28,000 Basic Salary + Overtime Opportunities + Training & Benefits including Healthcare & 10% pension Have you got an electromechanical assembly background? Are you interested in the world of scientific and laboratory equipment? If you've answered yes to both, this could be a brilliant opportunity for you. The Company recruiting for the Production Technician : This well-respected manufacturer of laboratory instrumentation works with a wide portfolio of international clients. Their equipment is trusted by well-known leading organisations within the food & drink sector as well more specialist industries including ecology, geotechnical, drug misuse & doping. Having a truly international footprint they are looking to strengthen their in-house technical assembly team. A recent acquisition means there are substantial career opportunities further down the line. Your Role as a Production Technician : Based in Crewe and will be responsible for the building and assembly of their bespoke scientific and laboratory equipment. Assembling electrical, mechanical, and electronic components to detailed specifications. Working as part of an experienced team you will be supported and will become a valued member of the company. Conducting tests and troubleshooting on assembled products. Involvement with everything from making wiring harnesses to cabinet assembly. Mon - Fri role working daytime hours. Ideal Background for the Production Technician : You need to have strong electromechanical assembly experience and a genuine practical interest. Ideally you will have experience reading engineering / technical drawings and schematics. Strong eye for detail, great practical, technical & problem-solving ability. Experience with soldering, crimping, and mechanical assembly. Able to commute daily to the Crewe facility. Right to work in the UK indefinitely as sponsorship won't be provided. The Package for the Production Technician Position : 26,000 - 28,000 basic salary, depending on experience. Overtime opportunities available. Ongoing training. Competitive benefits package - including 10% pension & healthcare. 25 days holiday + stats. Please apply for this job online if you are interested and feel you fit the above criteria. Dave is the main point of contact for the role. INDENG
Oct 06, 2025
Full time
Production Technician - Scientific Instruments Scientific & Laboratory Instrumentation - Cheshire Crewe, Nantwich, Sandbach, Haslington 26,000 - 28,000 Basic Salary + Overtime Opportunities + Training & Benefits including Healthcare & 10% pension Have you got an electromechanical assembly background? Are you interested in the world of scientific and laboratory equipment? If you've answered yes to both, this could be a brilliant opportunity for you. The Company recruiting for the Production Technician : This well-respected manufacturer of laboratory instrumentation works with a wide portfolio of international clients. Their equipment is trusted by well-known leading organisations within the food & drink sector as well more specialist industries including ecology, geotechnical, drug misuse & doping. Having a truly international footprint they are looking to strengthen their in-house technical assembly team. A recent acquisition means there are substantial career opportunities further down the line. Your Role as a Production Technician : Based in Crewe and will be responsible for the building and assembly of their bespoke scientific and laboratory equipment. Assembling electrical, mechanical, and electronic components to detailed specifications. Working as part of an experienced team you will be supported and will become a valued member of the company. Conducting tests and troubleshooting on assembled products. Involvement with everything from making wiring harnesses to cabinet assembly. Mon - Fri role working daytime hours. Ideal Background for the Production Technician : You need to have strong electromechanical assembly experience and a genuine practical interest. Ideally you will have experience reading engineering / technical drawings and schematics. Strong eye for detail, great practical, technical & problem-solving ability. Experience with soldering, crimping, and mechanical assembly. Able to commute daily to the Crewe facility. Right to work in the UK indefinitely as sponsorship won't be provided. The Package for the Production Technician Position : 26,000 - 28,000 basic salary, depending on experience. Overtime opportunities available. Ongoing training. Competitive benefits package - including 10% pension & healthcare. 25 days holiday + stats. Please apply for this job online if you are interested and feel you fit the above criteria. Dave is the main point of contact for the role. INDENG
World-changing careers, enabled by Johnson Matthey. With more than 200 years history, join us and help to accelerate the transition to net-zero! As an Instrument Technician, you'll contribute to JM's mission as a world leader in sustainable technology, transforming energy and reducing carbon emissions for a cleaner, brighter future. The role: As an Instrument Technician, you will help drive our goals by: Providing skilled execution of Planned, Reactive & Corrective Instrumentation maintenance activities to ensure the ongoing reliability of equipment across the plant Effective problem solving and fault diagnosis skills, adhering to identified work priorities to ensure that customers and stakeholders are supported in their daily operational needs Identifying and carrying out occasional plant modification work to help enhance plant safety and improve efficiency Conducting Inspections, testing, calibration, adjustments and monitoring tasks as required to maintain efficient plant and equipment reliability. Key skills that will help you succeed in this role: An Instrumentation qualification to NVQ level 3 or equivalent. Instrumentation experience in a manufacturing / chemical industry within a maintenance function Experience of large scale complex manufacturing facilities/plants Ability to read and comprehend basic electrical and mechanical drawings Even if you only match some of the skills, we'd love to hear from you to discuss further! This role is a 12.5 hour day shift pattern which includes weekends on a rotation of 5 days on followed by 4 days off in rotation. Due to the nature of this role applicants must be non-smokers and have been free from nicotine products for at least 3 months What we offer: We make sure salaries are fair, competitive and aligned to individual roles, experience and responsibilities. We are also supportive of hybrid and flexible working and offer benefits that support our employees' financial and physical wellbeing, such as: Competitive Retirement savings Company-matched Share Incentive Plan Life Assurance, Income Protection and Critical Illness Medical Plans/Health Assessments Retailer and Wellbeing Discounts Competitive Annual Incentive Plan Ready to make a meaningful impact on your career and the environment? Join us and help shape a sustainable future while advancing your career! At JM, inclusivity is central to our values. We create an environment where everyone can thrive, embracing diverse perspectives to tackle challenges and ensure all colleagues feel valued and connected. For any queries or accessibility requirements, please contact (url removed). We will work with you to make suitable adjustments at any stage of the recruitment process. All conversations are confidential, and your feedback is welcome to help us provide an accessible and positive recruitment experience. Closing date for applications: This job advertisement will be posted for a minimum of 2 weeks, early application is advised. To submit your application, please click the "Apply" button online. All applications are carefully considered and your details will be stored on our secure Application Management System. This is used throughout Johnson Matthey for the selection of suitable candidates for our vacancies as they arise.Johnson Matthey respects your privacy and is committed to protecting your personal information. For more information about how your personal data is used please view our privacy notice: Johnson Matthey Privacy Notice . By applying for this role and creating an account you are agreeing to the notice. Johnson Matthey Plc is an equal opportunities employer and positively encourages applications from suitably qualified and eligible candidates regardless of sex, race, disability, age, sexual orientation, marriage or civil partnership, pregnancy or maternity, religion or belief.
Oct 05, 2025
Full time
World-changing careers, enabled by Johnson Matthey. With more than 200 years history, join us and help to accelerate the transition to net-zero! As an Instrument Technician, you'll contribute to JM's mission as a world leader in sustainable technology, transforming energy and reducing carbon emissions for a cleaner, brighter future. The role: As an Instrument Technician, you will help drive our goals by: Providing skilled execution of Planned, Reactive & Corrective Instrumentation maintenance activities to ensure the ongoing reliability of equipment across the plant Effective problem solving and fault diagnosis skills, adhering to identified work priorities to ensure that customers and stakeholders are supported in their daily operational needs Identifying and carrying out occasional plant modification work to help enhance plant safety and improve efficiency Conducting Inspections, testing, calibration, adjustments and monitoring tasks as required to maintain efficient plant and equipment reliability. Key skills that will help you succeed in this role: An Instrumentation qualification to NVQ level 3 or equivalent. Instrumentation experience in a manufacturing / chemical industry within a maintenance function Experience of large scale complex manufacturing facilities/plants Ability to read and comprehend basic electrical and mechanical drawings Even if you only match some of the skills, we'd love to hear from you to discuss further! This role is a 12.5 hour day shift pattern which includes weekends on a rotation of 5 days on followed by 4 days off in rotation. Due to the nature of this role applicants must be non-smokers and have been free from nicotine products for at least 3 months What we offer: We make sure salaries are fair, competitive and aligned to individual roles, experience and responsibilities. We are also supportive of hybrid and flexible working and offer benefits that support our employees' financial and physical wellbeing, such as: Competitive Retirement savings Company-matched Share Incentive Plan Life Assurance, Income Protection and Critical Illness Medical Plans/Health Assessments Retailer and Wellbeing Discounts Competitive Annual Incentive Plan Ready to make a meaningful impact on your career and the environment? Join us and help shape a sustainable future while advancing your career! At JM, inclusivity is central to our values. We create an environment where everyone can thrive, embracing diverse perspectives to tackle challenges and ensure all colleagues feel valued and connected. For any queries or accessibility requirements, please contact (url removed). We will work with you to make suitable adjustments at any stage of the recruitment process. All conversations are confidential, and your feedback is welcome to help us provide an accessible and positive recruitment experience. Closing date for applications: This job advertisement will be posted for a minimum of 2 weeks, early application is advised. To submit your application, please click the "Apply" button online. All applications are carefully considered and your details will be stored on our secure Application Management System. This is used throughout Johnson Matthey for the selection of suitable candidates for our vacancies as they arise.Johnson Matthey respects your privacy and is committed to protecting your personal information. For more information about how your personal data is used please view our privacy notice: Johnson Matthey Privacy Notice . By applying for this role and creating an account you are agreeing to the notice. Johnson Matthey Plc is an equal opportunities employer and positively encourages applications from suitably qualified and eligible candidates regardless of sex, race, disability, age, sexual orientation, marriage or civil partnership, pregnancy or maternity, religion or belief.
World-changing careers, enabled by Johnson Matthey. With more than 200 years history, join us and help to accelerate the transition to net-zero! As an Instrument Technician, you'll contribute to JM's mission as a world leader in sustainable technology, transforming energy and reducing carbon emissions for a cleaner, brighter future. The role: As an Instrument Technician, you will help drive our goals by: Providing skilled execution of Planned, Reactive & Corrective Instrumentation maintenance activities to ensure the ongoing reliability of equipment across the plant Effective problem solving and fault diagnosis skills, adhering to identified work priorities to ensure that customers and stakeholders are supported in their daily operational needs Identifying and carrying out occasional plant modification work to help enhance plant safety and improve efficiency Conducting Inspections, testing, calibration, adjustments and monitoring tasks as required to maintain efficient plant and equipment reliability. Key skills that will help you succeed in this role: An Instrumentation qualification to NVQ level 3 or equivalent. Instrumentation experience in a manufacturing / chemical industry within a maintenance function Experience of large scale complex manufacturing facilities/plants Ability to read and comprehend basic electrical and mechanical drawings Even if you only match some of the skills, we'd love to hear from you to discuss further! This role is a 12.5 hour day shift pattern which includes weekends on a rotation of 5 days on followed by 4 days off in rotation. Due to the nature of this role applicants must be non-smokers and have been free from nicotine products for at least 3 months What we offer: We make sure salaries are fair, competitive and aligned to individual roles, experience and responsibilities. We are also supportive of hybrid and flexible working and offer benefits that support our employees' financial and physical wellbeing, such as: Competitive Retirement savings Company-matched Share Incentive Plan Life Assurance, Income Protection and Critical Illness Medical Plans/Health Assessments Retailer and Wellbeing Discounts Competitive Annual Incentive Plan Ready to make a meaningful impact on your career and the environment? Join us and help shape a sustainable future while advancing your career! At JM, inclusivity is central to our values. We create an environment where everyone can thrive, embracing diverse perspectives to tackle challenges and ensure all colleagues feel valued and connected. For any queries or accessibility requirements, please contact (url removed). We will work with you to make suitable adjustments at any stage of the recruitment process. All conversations are confidential, and your feedback is welcome to help us provide an accessible and positive recruitment experience. Closing date for applications: This job advertisement will be posted for a minimum of 2 weeks, early application is advised. To submit your application, please click the "Apply" button online. All applications are carefully considered and your details will be stored on our secure Application Management System. This is used throughout Johnson Matthey for the selection of suitable candidates for our vacancies as they arise.Johnson Matthey respects your privacy and is committed to protecting your personal information. For more information about how your personal data is used please view our privacy notice: Johnson Matthey Privacy Notice . By applying for this role and creating an account you are agreeing to the notice. Johnson Matthey Plc is an equal opportunities employer and positively encourages applications from suitably qualified and eligible candidates regardless of sex, race, disability, age, sexual orientation, marriage or civil partnership, pregnancy or maternity, religion or belief.
Oct 04, 2025
Full time
World-changing careers, enabled by Johnson Matthey. With more than 200 years history, join us and help to accelerate the transition to net-zero! As an Instrument Technician, you'll contribute to JM's mission as a world leader in sustainable technology, transforming energy and reducing carbon emissions for a cleaner, brighter future. The role: As an Instrument Technician, you will help drive our goals by: Providing skilled execution of Planned, Reactive & Corrective Instrumentation maintenance activities to ensure the ongoing reliability of equipment across the plant Effective problem solving and fault diagnosis skills, adhering to identified work priorities to ensure that customers and stakeholders are supported in their daily operational needs Identifying and carrying out occasional plant modification work to help enhance plant safety and improve efficiency Conducting Inspections, testing, calibration, adjustments and monitoring tasks as required to maintain efficient plant and equipment reliability. Key skills that will help you succeed in this role: An Instrumentation qualification to NVQ level 3 or equivalent. Instrumentation experience in a manufacturing / chemical industry within a maintenance function Experience of large scale complex manufacturing facilities/plants Ability to read and comprehend basic electrical and mechanical drawings Even if you only match some of the skills, we'd love to hear from you to discuss further! This role is a 12.5 hour day shift pattern which includes weekends on a rotation of 5 days on followed by 4 days off in rotation. Due to the nature of this role applicants must be non-smokers and have been free from nicotine products for at least 3 months What we offer: We make sure salaries are fair, competitive and aligned to individual roles, experience and responsibilities. We are also supportive of hybrid and flexible working and offer benefits that support our employees' financial and physical wellbeing, such as: Competitive Retirement savings Company-matched Share Incentive Plan Life Assurance, Income Protection and Critical Illness Medical Plans/Health Assessments Retailer and Wellbeing Discounts Competitive Annual Incentive Plan Ready to make a meaningful impact on your career and the environment? Join us and help shape a sustainable future while advancing your career! At JM, inclusivity is central to our values. We create an environment where everyone can thrive, embracing diverse perspectives to tackle challenges and ensure all colleagues feel valued and connected. For any queries or accessibility requirements, please contact (url removed). We will work with you to make suitable adjustments at any stage of the recruitment process. All conversations are confidential, and your feedback is welcome to help us provide an accessible and positive recruitment experience. Closing date for applications: This job advertisement will be posted for a minimum of 2 weeks, early application is advised. To submit your application, please click the "Apply" button online. All applications are carefully considered and your details will be stored on our secure Application Management System. This is used throughout Johnson Matthey for the selection of suitable candidates for our vacancies as they arise.Johnson Matthey respects your privacy and is committed to protecting your personal information. For more information about how your personal data is used please view our privacy notice: Johnson Matthey Privacy Notice . By applying for this role and creating an account you are agreeing to the notice. Johnson Matthey Plc is an equal opportunities employer and positively encourages applications from suitably qualified and eligible candidates regardless of sex, race, disability, age, sexual orientation, marriage or civil partnership, pregnancy or maternity, religion or belief.
Job Title: Senior Instrument Engineer Job ID: 36854 Location: Seal Sands, Middlesbrough Salary: £60,000 to £65,000 (dependent on experience) Hours: 40 hours per week - flexible working hours core hours Monday to Friday 9:30am to 3:00pm Contract/Permanent: Permanent Site Based/Office/Remote: Site and Office based Start Date: ASAP Benefits: 28 days holiday plus bank holidays Pension is Salary sacrifice 6% and we match up to another 3% Incentive bonus at 2% per quarter Onsite Parking Overview As a key member of the EC&I Team, the Senior Instrument Engineer will be responsible for the design, development, installation, management of all instrumentation and systems across the site. Provide technical support to the maintenance technicians. The Senior Instrument Engineer will support the Manufacturing facilities in production. Contribute and deliver capital projects. Ensure regulatory compliance. Main Tasks and Responsibilities: The Senior Instrument Engineer will development and design of advanced instrumentation and control systems for both new and existing processes. Author and review detailed specifications and comprehensive design documentation for complex instrumentation systems. The Senior Instrument Engineer will supervise and coordinate the installation and commissioning of instrumentation and control system, managing installation contractors and ensuring adherence to project timelines. Conduct thorough site inspections and rigorous testing to verify proper installation and optimal functionality of instrumentation systems. Collaborate closely with multidisciplinary project teams to seamlessly integrate instrumentation systems into overall plant operations. Develop, implement, and oversee maintenance schedules for instrumentation and control systems, ensuring long-term reliability and performance. Diagnose, troubleshoot, and resolve complex issues with instrumentation and control systems, providing expert guidance and support. Lead and actively contribute to HAZOP (Hazard and Operability Study) and LOPA (Layer of Protection Analysis) meetings, ensuring safety and compliance. Maintain meticulous documentation and records in strict accordance with COMAH regulations, ensuring regulatory compliance. Ensure all instrumentation and control systems comply with ATEX directives, providing expert oversight and guidance. Select, install, and validate ATEX-certified equipment in hazardous areas, ensuring safety and compliance. Identify, evaluate, and implement opportunities for process improvements, driving innovation and efficiency within the instrumentation domain. Oversee functional safety activities, including the development of Safety Requirements Specifications (SRS), arranging Functional Safety Assessments (FSA), and performing verification calculations to ensure compliance with safety standards. SHEQ: Ensure that all Health, Safety and Environmental requirements are met including (but not limited to) workplace organization, work instructions, risk assessments, COSHH assessments, housekeeping standards in accordance with GLP and GMP Demonstrable evidence of understanding the importance of creating a safe environment Working in a safe manner Follow appropriate and relevant practices and procedures Team Building & Incentive: Assist in the generation, data collection and monitoring of key performance indicators (KPIs). Organize and deliver SHE related training modules for staff. Communication: Verbal and written communication within Engineering Team. Participate in interdepartmental communications. Communication: Verbal and written communication within Engineering Team. Participate in interdepartmental communications. Confidentiality: Follow company policies and procedures to keep confidentiality on sensitive information. Skills & Qualifications: Bachelor's degree in Electrical, Instrumentation & Control Systems Engineering, or a related field. Functional safety qualifications (desirable) CompEx Ex12 (Desirable) Strong knowledge of COMAH and ATEX regulations and safety standards. Proficiency in instrumentation and control system design, installation, and maintenance. Excellent problem-solving and analytical skills. Strong communication and teamwork abilities. Proficiency in AutoCAD for designing and drafting instrumentation and control systems. Experience with batch processing systems (Desirable) Familiarity with PLC, DCS, and SCADA systems particularly Siemens PCS7 (Desirable) You have been sent this vacancy list by EC&I Partners. By clicking "accept", we will call you to discuss your current circumstancesand process your application. If you choose to"reject", please add a comment to help us understand why the role isn't for you. If you would like to talk to one of our consultants before making a decision, our phone number is (phone number removed). Please note our office hours are 9am-4pm Monday-Friday.
Oct 03, 2025
Full time
Job Title: Senior Instrument Engineer Job ID: 36854 Location: Seal Sands, Middlesbrough Salary: £60,000 to £65,000 (dependent on experience) Hours: 40 hours per week - flexible working hours core hours Monday to Friday 9:30am to 3:00pm Contract/Permanent: Permanent Site Based/Office/Remote: Site and Office based Start Date: ASAP Benefits: 28 days holiday plus bank holidays Pension is Salary sacrifice 6% and we match up to another 3% Incentive bonus at 2% per quarter Onsite Parking Overview As a key member of the EC&I Team, the Senior Instrument Engineer will be responsible for the design, development, installation, management of all instrumentation and systems across the site. Provide technical support to the maintenance technicians. The Senior Instrument Engineer will support the Manufacturing facilities in production. Contribute and deliver capital projects. Ensure regulatory compliance. Main Tasks and Responsibilities: The Senior Instrument Engineer will development and design of advanced instrumentation and control systems for both new and existing processes. Author and review detailed specifications and comprehensive design documentation for complex instrumentation systems. The Senior Instrument Engineer will supervise and coordinate the installation and commissioning of instrumentation and control system, managing installation contractors and ensuring adherence to project timelines. Conduct thorough site inspections and rigorous testing to verify proper installation and optimal functionality of instrumentation systems. Collaborate closely with multidisciplinary project teams to seamlessly integrate instrumentation systems into overall plant operations. Develop, implement, and oversee maintenance schedules for instrumentation and control systems, ensuring long-term reliability and performance. Diagnose, troubleshoot, and resolve complex issues with instrumentation and control systems, providing expert guidance and support. Lead and actively contribute to HAZOP (Hazard and Operability Study) and LOPA (Layer of Protection Analysis) meetings, ensuring safety and compliance. Maintain meticulous documentation and records in strict accordance with COMAH regulations, ensuring regulatory compliance. Ensure all instrumentation and control systems comply with ATEX directives, providing expert oversight and guidance. Select, install, and validate ATEX-certified equipment in hazardous areas, ensuring safety and compliance. Identify, evaluate, and implement opportunities for process improvements, driving innovation and efficiency within the instrumentation domain. Oversee functional safety activities, including the development of Safety Requirements Specifications (SRS), arranging Functional Safety Assessments (FSA), and performing verification calculations to ensure compliance with safety standards. SHEQ: Ensure that all Health, Safety and Environmental requirements are met including (but not limited to) workplace organization, work instructions, risk assessments, COSHH assessments, housekeeping standards in accordance with GLP and GMP Demonstrable evidence of understanding the importance of creating a safe environment Working in a safe manner Follow appropriate and relevant practices and procedures Team Building & Incentive: Assist in the generation, data collection and monitoring of key performance indicators (KPIs). Organize and deliver SHE related training modules for staff. Communication: Verbal and written communication within Engineering Team. Participate in interdepartmental communications. Communication: Verbal and written communication within Engineering Team. Participate in interdepartmental communications. Confidentiality: Follow company policies and procedures to keep confidentiality on sensitive information. Skills & Qualifications: Bachelor's degree in Electrical, Instrumentation & Control Systems Engineering, or a related field. Functional safety qualifications (desirable) CompEx Ex12 (Desirable) Strong knowledge of COMAH and ATEX regulations and safety standards. Proficiency in instrumentation and control system design, installation, and maintenance. Excellent problem-solving and analytical skills. Strong communication and teamwork abilities. Proficiency in AutoCAD for designing and drafting instrumentation and control systems. Experience with batch processing systems (Desirable) Familiarity with PLC, DCS, and SCADA systems particularly Siemens PCS7 (Desirable) You have been sent this vacancy list by EC&I Partners. By clicking "accept", we will call you to discuss your current circumstancesand process your application. If you choose to"reject", please add a comment to help us understand why the role isn't for you. If you would like to talk to one of our consultants before making a decision, our phone number is (phone number removed). Please note our office hours are 9am-4pm Monday-Friday.
ADAS Test Technician (992) Location: Cranfield Pay: Tech E+ £19.67 per hour 5-day working week in the office, normal hours are (8:00-17:00 Mon-Thu & 8:00-13:20 Fri) We are recruiting for a ADAS Test Technician for one of our automotive clients based in Cranfield. You will be working for a globally recognised automotive company. This is a long-term contract role. The contract is on an ongoing basis a may run for several years. Key Responsibilities of the ADAS Test Technician: • Preparation / building / maintenance of vehicles, instrumentation, and data acquisition systems in line with local procedures and the clients Engineering Manuals. • Support Testing in dynamic conditions to gather accurate, timely, and quality test data/results. • Support Evaluation and concern identification including liaison with Test Engineer. • Support delivery of Key Performance Indicators for the section • Use skills to provide support to other sections as required. Vehicle preparation, instrumentation, test, and validation of function & operation: • Fundamental understanding of vehicle dis-assembly, assembly, & maintenance techniques. • UK license holder with 3 years experience, preferably LHD /European driving experience. (Any additional driving Qual s advantageous) • Vehicle CAN bus system knowledge with the ability to fault find. • Experience with Vector CAN tools not compulsory but an advantage. • Harness fabrication/repair and ability to read technical drawings a must. • Instrumentation set-up (Camera, Radar, ADAS Logging) • Data acquisition & Report writing • Microsoft Office competency required (Excel/PowerPoint) • Willingness and flexibility to travel on short notice for business purposes, typically for durations of up to two weeks. Travel commitments are expected to grow as the role evolves. • Organised, work to deadlines and can operate under own initiative. • Develop relationship with engineering team. Qualifications & Experience for the ADAS Test Technician: • C&G / BTEC L3 would be preferable, ideally in mechanical, electrical, or automotive engineering with a recognised apprenticeship or qualification within a relevant field. Vehicle preparation, instrumentation, test, and validation of function & operation: • Fundamental understanding of vehicle dis-assembly, assembly, & maintenance techniques. • UK license holder with 3 years experience, preferably LHD /European driving experience. (Any additional driving Qual s advantageous) • Vehicle CAN bus system knowledge with the ability to fault find. • Experience with Vector CAN tools not compulsory but an advantage. • Harness fabrication/repair and ability to read technical drawings a must. • Instrumentation set-up (Camera, Radar, ADAS Logging) • Data acquisition & Report writing • Microsoft Office competency required (Excel/PowerPoint) • Willingness and flexibility to travel on short notice for business purposes, typically for durations of up to two weeks. Travel commitments are expected to grow as the role evolves. • Organised, work to deadlines and can operate under own initiative. • Develop relationship with engineering team. LMIND
Oct 03, 2025
Contractor
ADAS Test Technician (992) Location: Cranfield Pay: Tech E+ £19.67 per hour 5-day working week in the office, normal hours are (8:00-17:00 Mon-Thu & 8:00-13:20 Fri) We are recruiting for a ADAS Test Technician for one of our automotive clients based in Cranfield. You will be working for a globally recognised automotive company. This is a long-term contract role. The contract is on an ongoing basis a may run for several years. Key Responsibilities of the ADAS Test Technician: • Preparation / building / maintenance of vehicles, instrumentation, and data acquisition systems in line with local procedures and the clients Engineering Manuals. • Support Testing in dynamic conditions to gather accurate, timely, and quality test data/results. • Support Evaluation and concern identification including liaison with Test Engineer. • Support delivery of Key Performance Indicators for the section • Use skills to provide support to other sections as required. Vehicle preparation, instrumentation, test, and validation of function & operation: • Fundamental understanding of vehicle dis-assembly, assembly, & maintenance techniques. • UK license holder with 3 years experience, preferably LHD /European driving experience. (Any additional driving Qual s advantageous) • Vehicle CAN bus system knowledge with the ability to fault find. • Experience with Vector CAN tools not compulsory but an advantage. • Harness fabrication/repair and ability to read technical drawings a must. • Instrumentation set-up (Camera, Radar, ADAS Logging) • Data acquisition & Report writing • Microsoft Office competency required (Excel/PowerPoint) • Willingness and flexibility to travel on short notice for business purposes, typically for durations of up to two weeks. Travel commitments are expected to grow as the role evolves. • Organised, work to deadlines and can operate under own initiative. • Develop relationship with engineering team. Qualifications & Experience for the ADAS Test Technician: • C&G / BTEC L3 would be preferable, ideally in mechanical, electrical, or automotive engineering with a recognised apprenticeship or qualification within a relevant field. Vehicle preparation, instrumentation, test, and validation of function & operation: • Fundamental understanding of vehicle dis-assembly, assembly, & maintenance techniques. • UK license holder with 3 years experience, preferably LHD /European driving experience. (Any additional driving Qual s advantageous) • Vehicle CAN bus system knowledge with the ability to fault find. • Experience with Vector CAN tools not compulsory but an advantage. • Harness fabrication/repair and ability to read technical drawings a must. • Instrumentation set-up (Camera, Radar, ADAS Logging) • Data acquisition & Report writing • Microsoft Office competency required (Excel/PowerPoint) • Willingness and flexibility to travel on short notice for business purposes, typically for durations of up to two weeks. Travel commitments are expected to grow as the role evolves. • Organised, work to deadlines and can operate under own initiative. • Develop relationship with engineering team. LMIND
Astute's Power Team is partnered with a market leading energy company to recruit an Electrical, Controls and Instrumentation (EC&I) Technician for their Energy from Waste Power Station in Birmingham, West Midlands. The vital EC&I Technician role comes with a salary of 52,686 + Bonus + Overtime + benefits. If you're an Electrical, Controls and Instrumentation Technician and are looking to work for an organisation that puts integrity and people at the forefront of everything it does then upload your CV to apply today. Responsibilities and duties: Reporting to the Maintenance Engineer you will: Carrying out fault diagnosis, repairs, planned and unplanned maintenance activities on all EC&I assets to maximise plant availability including pressure, level, temperature and flow sensors and control systems (DCS, PLCs) and electrical equipment. Assisting during major maintenance periods, shutdowns, outages etc. when required to ensure maximum plant availability and efficiency. Working alongside other technicians in the maintenance team in diagnosing faults and assisting/suggesting equipment upgrades Maintaining accurate maintenance records using the site CMMS Supervising and directing on site contractors when required Working within the company health, safety and environmental processes and procedures at all times. Professional qualifications: We are looking for someone with the following: Ideally have at least an NVQ Level 3 in a relevant engineering discipline such as controls and instrumentation or electrical engineering. 17th / 18th Edition will be highly advantageous A formal health and safety qualification such as IOSH would be advantageous Experience, knowledge, and personal skills The EC&I Technician role would suit someone who has: Prior experience working in heavy process engineering environments such as Power (EfW, Biomass, CCGT, Coal, CHP, etc), Pharmaceutical, Chemicals, Steel Production, etc. Having prior experience working with steam generation equipment will be highly advantageous. Excellent technical knowledge of PLC, DCS, Instrumentation and some electrical systems Experience working with Computerised Maintenance Management Systems (CMMS) Salary and benefits of the EC&I Technician role: Basic salary of 52,686 Bonus Overtime Other excellent benefits Astute People are acting as an employment agency in relation to this vacancy. We do not discriminate on the grounds of age, race, gender, disability, creed or sexual orientation and comply with all relevant UK legislation. We encourage applications from individuals from all backgrounds but candidates must be able to demonstrate their ability to work in the UK. Astute is also committed to the government's Disability Confident Employer initiative. We endeavour to get back to everyone, however, if you have not heard anything after 7 days, please consider your application unsuccessful.
Oct 03, 2025
Full time
Astute's Power Team is partnered with a market leading energy company to recruit an Electrical, Controls and Instrumentation (EC&I) Technician for their Energy from Waste Power Station in Birmingham, West Midlands. The vital EC&I Technician role comes with a salary of 52,686 + Bonus + Overtime + benefits. If you're an Electrical, Controls and Instrumentation Technician and are looking to work for an organisation that puts integrity and people at the forefront of everything it does then upload your CV to apply today. Responsibilities and duties: Reporting to the Maintenance Engineer you will: Carrying out fault diagnosis, repairs, planned and unplanned maintenance activities on all EC&I assets to maximise plant availability including pressure, level, temperature and flow sensors and control systems (DCS, PLCs) and electrical equipment. Assisting during major maintenance periods, shutdowns, outages etc. when required to ensure maximum plant availability and efficiency. Working alongside other technicians in the maintenance team in diagnosing faults and assisting/suggesting equipment upgrades Maintaining accurate maintenance records using the site CMMS Supervising and directing on site contractors when required Working within the company health, safety and environmental processes and procedures at all times. Professional qualifications: We are looking for someone with the following: Ideally have at least an NVQ Level 3 in a relevant engineering discipline such as controls and instrumentation or electrical engineering. 17th / 18th Edition will be highly advantageous A formal health and safety qualification such as IOSH would be advantageous Experience, knowledge, and personal skills The EC&I Technician role would suit someone who has: Prior experience working in heavy process engineering environments such as Power (EfW, Biomass, CCGT, Coal, CHP, etc), Pharmaceutical, Chemicals, Steel Production, etc. Having prior experience working with steam generation equipment will be highly advantageous. Excellent technical knowledge of PLC, DCS, Instrumentation and some electrical systems Experience working with Computerised Maintenance Management Systems (CMMS) Salary and benefits of the EC&I Technician role: Basic salary of 52,686 Bonus Overtime Other excellent benefits Astute People are acting as an employment agency in relation to this vacancy. We do not discriminate on the grounds of age, race, gender, disability, creed or sexual orientation and comply with all relevant UK legislation. We encourage applications from individuals from all backgrounds but candidates must be able to demonstrate their ability to work in the UK. Astute is also committed to the government's Disability Confident Employer initiative. We endeavour to get back to everyone, however, if you have not heard anything after 7 days, please consider your application unsuccessful.
