Join a people-focused automotive company that truly values its employees. This permanent role includes full training and development, an early finish every Friday, 20 days' annual leave plus bank holidays, and an additional day off for your birthday. The Coachbuilder role is based in Manchester - accessible from the M60, including areas such as Irlam, Sale, Stockport, and lower Bolton. The company are specialists in vehicle bodybuilding, from panel vans to 26-ton truck bodies. A trusted industry name, known for quality, reliability, and outstanding customer service. Typical duties include the Coachbuilder role : Following standard operating procedures (SOPs) Drilling, assembling, and installing mechanical components Fitting side panels, flooring, and other parts into new vans Using a range of hand and power tools Electrically terminating lighting, switches and tail lifts Cutting of metals, woods and plastics using hand tools and bench equipment. Read engineering drawings provided and work from work orders. As a Coachbuilder , you'll be responsible for the assembly and installation of mechanical components on a range of commercial vehicles. Full training is provided, making this a great opportunity for individuals with transferable mechanical or assembly skills. The Coachbuilder would suit you, with experience of : Vehicle Bodybuilder Trailer Fitter Vehicle Builder Semi-Skilled Mechanic Mechanical Assembler Assembly fitter Motorhome Engineer Workshop Engineer Benefits of the Coachbuilder : A day off for your birthday Paying up to 15.60 Bonus opportunities Enhanced maternity and paternity policies Access to a wellbeing and employee assistance programme Training and development opportunities Death in service benefit 20 days annual leave plus bank holidays If you are interested in the coachbuilder role , please give Maisie a call at E3 Recruitment a call.
Jun 14, 2026
Full time
Join a people-focused automotive company that truly values its employees. This permanent role includes full training and development, an early finish every Friday, 20 days' annual leave plus bank holidays, and an additional day off for your birthday. The Coachbuilder role is based in Manchester - accessible from the M60, including areas such as Irlam, Sale, Stockport, and lower Bolton. The company are specialists in vehicle bodybuilding, from panel vans to 26-ton truck bodies. A trusted industry name, known for quality, reliability, and outstanding customer service. Typical duties include the Coachbuilder role : Following standard operating procedures (SOPs) Drilling, assembling, and installing mechanical components Fitting side panels, flooring, and other parts into new vans Using a range of hand and power tools Electrically terminating lighting, switches and tail lifts Cutting of metals, woods and plastics using hand tools and bench equipment. Read engineering drawings provided and work from work orders. As a Coachbuilder , you'll be responsible for the assembly and installation of mechanical components on a range of commercial vehicles. Full training is provided, making this a great opportunity for individuals with transferable mechanical or assembly skills. The Coachbuilder would suit you, with experience of : Vehicle Bodybuilder Trailer Fitter Vehicle Builder Semi-Skilled Mechanic Mechanical Assembler Assembly fitter Motorhome Engineer Workshop Engineer Benefits of the Coachbuilder : A day off for your birthday Paying up to 15.60 Bonus opportunities Enhanced maternity and paternity policies Access to a wellbeing and employee assistance programme Training and development opportunities Death in service benefit 20 days annual leave plus bank holidays If you are interested in the coachbuilder role , please give Maisie a call at E3 Recruitment a call.
Are you a Mechanical Fitter with experience in fast paced manufacturing environments? If so Futures are currently recruiting for an experienced Mechanical Fitter to join a well established manufacturer. This is an excellent opportunity for a skilled individual who takes pride in producing high-quality work and working to exacting standards. The Responsibilities Read and interpret engineering drawings, technical diagrams, and assembly instructions. Carry out mechanical fitting, assembly, and installation work in line with specifications. Drill, tap, and prepare components accurately using a range of hand and power tools. Use measuring equipment to ensure precision and compliance with engineering tolerances. Assemble mechanical components and sub-assemblies to a high standard of quality. Inspect completed work and carry out quality checks throughout the manufacturing process. Maintain a safe and organised working environment at all times. Work effectively within a fast-paced production environment to meet project deadlines and production targets. Identify and report any issues relating to drawings, materials, or assembly processes. The Requirements Previous experience working as a Mechanical Fitter, Assembly Fitter, or in a similar engineering/manufacturing role. Ability to confidently read and interpret engineering drawings. Experience drilling, tapping, assembling, and fitting mechanical components. Competent in the use of hand tools, power tools, and measuring equipment. Strong attention to detail with a commitment to producing work to a high standard. Ability to work independently and as part of a team. Good problem-solving skills and a proactive approach to work. Flexible and adaptable within a fast-moving manufacturing environment.
Jun 14, 2026
Full time
Are you a Mechanical Fitter with experience in fast paced manufacturing environments? If so Futures are currently recruiting for an experienced Mechanical Fitter to join a well established manufacturer. This is an excellent opportunity for a skilled individual who takes pride in producing high-quality work and working to exacting standards. The Responsibilities Read and interpret engineering drawings, technical diagrams, and assembly instructions. Carry out mechanical fitting, assembly, and installation work in line with specifications. Drill, tap, and prepare components accurately using a range of hand and power tools. Use measuring equipment to ensure precision and compliance with engineering tolerances. Assemble mechanical components and sub-assemblies to a high standard of quality. Inspect completed work and carry out quality checks throughout the manufacturing process. Maintain a safe and organised working environment at all times. Work effectively within a fast-paced production environment to meet project deadlines and production targets. Identify and report any issues relating to drawings, materials, or assembly processes. The Requirements Previous experience working as a Mechanical Fitter, Assembly Fitter, or in a similar engineering/manufacturing role. Ability to confidently read and interpret engineering drawings. Experience drilling, tapping, assembling, and fitting mechanical components. Competent in the use of hand tools, power tools, and measuring equipment. Strong attention to detail with a commitment to producing work to a high standard. Ability to work independently and as part of a team. Good problem-solving skills and a proactive approach to work. Flexible and adaptable within a fast-moving manufacturing environment.
MET Fitter Up to 45,000 Stansted area A well-established automotive restoration and vehicle preparation business is looking to strengthen its team with the appointment of an experienced MET Fitter, Coachwork Fitter, or Strip & Fit Technician. This role offers the opportunity to work on an exceptional variety of projects, ranging from modern vehicles to rare and prestigious heritage cars. Responsibilities will include the stripping, inspection, refurbishment, and reassembly of vehicle components, requiring a meticulous approach and a commitment to high-quality workmanship. The successful candidate will join a highly skilled team dedicated to delivering outstanding standards across restoration, repair, and vehicle preparation projects. Key Responsibilities: Stripping and refitting vehicle body components Removal and installation of doors, wings, bumpers, grilles, lighting systems, trims, and associated fittings Dismantling heritage and classic vehicles for restoration projects Inspecting components for wear, damage, and refurbishment requirements Reassembling vehicles to a high standard following repair or restoration work Working closely with bodyshop, restoration, and paint teams Maintaining quality standards and ensuring all work is completed safely and efficiently The Ideal Candidate Will Have: Previous experience as an MET Fitter, Strip & Fit Technician, Coachwork Fitter, or similar Strong knowledge of vehicle body assemblies and component fitting Experience working on modern vehicles and/or classic vehicles Excellent attention to detail and workmanship standards Ability to work independently and as part of a skilled team A genuine interest in automotive restoration and vehicle craftsmanship What's on Offer: Salary up to 45,000 depending on experience Opportunity to work on a diverse range of modern and heritage vehicles Stable, long-term position with a well-established business Supportive and skilled working environment Exposure to unique restoration and specialist automotive projects If you're an experienced MET Fitter or Coachwork Fitter looking for a role that offers variety, technical challenge, and the opportunity to work on some exceptional vehicles, I'd be keen to speak with you.
Jun 14, 2026
Full time
MET Fitter Up to 45,000 Stansted area A well-established automotive restoration and vehicle preparation business is looking to strengthen its team with the appointment of an experienced MET Fitter, Coachwork Fitter, or Strip & Fit Technician. This role offers the opportunity to work on an exceptional variety of projects, ranging from modern vehicles to rare and prestigious heritage cars. Responsibilities will include the stripping, inspection, refurbishment, and reassembly of vehicle components, requiring a meticulous approach and a commitment to high-quality workmanship. The successful candidate will join a highly skilled team dedicated to delivering outstanding standards across restoration, repair, and vehicle preparation projects. Key Responsibilities: Stripping and refitting vehicle body components Removal and installation of doors, wings, bumpers, grilles, lighting systems, trims, and associated fittings Dismantling heritage and classic vehicles for restoration projects Inspecting components for wear, damage, and refurbishment requirements Reassembling vehicles to a high standard following repair or restoration work Working closely with bodyshop, restoration, and paint teams Maintaining quality standards and ensuring all work is completed safely and efficiently The Ideal Candidate Will Have: Previous experience as an MET Fitter, Strip & Fit Technician, Coachwork Fitter, or similar Strong knowledge of vehicle body assemblies and component fitting Experience working on modern vehicles and/or classic vehicles Excellent attention to detail and workmanship standards Ability to work independently and as part of a skilled team A genuine interest in automotive restoration and vehicle craftsmanship What's on Offer: Salary up to 45,000 depending on experience Opportunity to work on a diverse range of modern and heritage vehicles Stable, long-term position with a well-established business Supportive and skilled working environment Exposure to unique restoration and specialist automotive projects If you're an experienced MET Fitter or Coachwork Fitter looking for a role that offers variety, technical challenge, and the opportunity to work on some exceptional vehicles, I'd be keen to speak with you.
Location: Bicester Job Title : Engineering Manager Salary: 65,000 to 75,000 + 500 per month car allowance, DOE Hours: Monday to Friday, days, 8:00am to 5:00pm core hours My client is looking to appoint an experienced Engineering Workshop & Site Services Manager to lead a busy practical engineering operation covering fabrication, welding, machining, repair, refurbishment, installation and customer site work. This is a senior hands-on leadership role suited to someone who has already managed a mixed engineering workshop, engineering services business or similar practical environment. The successful candidate will need strong fabrication and welding understanding, supported by enough machining knowledge to plan varied workshop activity including one-off jobs, batch work, repairs, refurbishment and urgent customer requirements. This is not an automotive production, assembly or high-volume manufacturing management role. The environment is varied, practical and service-led, with responsibility for both in-house workshop priorities and the planning of customer site activity. The Engineering Manager role: As Engineering Workshop & Site Services Manager, you will lead a skilled team of approximately 10 tradespeople, including fabricators, welders, machinists, fitters and installers. You will plan and prioritise workshop workload, allocate labour, coordinate fitters and welders for customer site work, manage urgent requirements and make sure standards are maintained across quality, delivery, health and safety, and team performance. The role would suit someone from a fabrication, welding, machining, mechanical engineering services, industrial maintenance, pump/gearbox refurbishment, repair or site installation background. Key Engineering Services Manager responsibilities Lead the day-to-day activity of a busy engineering workshop. Manage a team of approximately 10 skilled tradespeople. Plan workshop workload and allocate labour effectively. Coordinate fitters, welders and installers for customer site work. Balance planned workshop jobs with urgent repairs, breakdowns and site requirements. Monitor job progress, priorities, quality and delivery expectations. Maintain strong health and safety standards across workshop and site activity. Manage team standards, performance and behaviour. Communicate clearly with the Managing Director, internal teams and customers where required. Keep the workshop organised, productive and commercially focused. Experience required Applicants must have experience managing a relevant engineering workshop, engineering services or site-support environment. Relevant backgrounds may include: Fabrication and welding businesses Engineering services companies Machine shops carrying out varied one-off, repair or batch work Industrial maintenance and mechanical service providers Pump, gearbox or mechanical refurbishment businesses Food, FMCG, utilities or process engineering contractors Businesses carrying out both workshop and customer site engineering work A strong fabrication and welding background would be particularly useful, as much of the customer site work is fabrication-led. Machining knowledge is also important, but this is more about understanding varied practical engineering jobs than managing a high-volume CNC production environment. Candidates from automotive will only be suitable if their background is genuinely relevant to fabrication, welding, machining, repair, refurbishment, site installation or practical engineering services. The person My client is looking for someone organised, practical and commercially aware, with the confidence to lead experienced tradespeople and make sensible decisions when priorities change. You will need to be comfortable balancing workshop jobs, customer site work, urgent repairs and breakdown requirements. This role will suit someone who can keep standards high, communicate clearly and bring structure to a busy engineering workshop and site services operation. Package 60,000 to 65,000 basic salary 500 per month car allowance Monday to Friday, days Core hours 8:00am to 5:00pm Flexibility required around customer work, urgent jobs and operational priorities If this Engineering Manager role is of interest to you, please click apply now below.
Jun 13, 2026
Full time
Location: Bicester Job Title : Engineering Manager Salary: 65,000 to 75,000 + 500 per month car allowance, DOE Hours: Monday to Friday, days, 8:00am to 5:00pm core hours My client is looking to appoint an experienced Engineering Workshop & Site Services Manager to lead a busy practical engineering operation covering fabrication, welding, machining, repair, refurbishment, installation and customer site work. This is a senior hands-on leadership role suited to someone who has already managed a mixed engineering workshop, engineering services business or similar practical environment. The successful candidate will need strong fabrication and welding understanding, supported by enough machining knowledge to plan varied workshop activity including one-off jobs, batch work, repairs, refurbishment and urgent customer requirements. This is not an automotive production, assembly or high-volume manufacturing management role. The environment is varied, practical and service-led, with responsibility for both in-house workshop priorities and the planning of customer site activity. The Engineering Manager role: As Engineering Workshop & Site Services Manager, you will lead a skilled team of approximately 10 tradespeople, including fabricators, welders, machinists, fitters and installers. You will plan and prioritise workshop workload, allocate labour, coordinate fitters and welders for customer site work, manage urgent requirements and make sure standards are maintained across quality, delivery, health and safety, and team performance. The role would suit someone from a fabrication, welding, machining, mechanical engineering services, industrial maintenance, pump/gearbox refurbishment, repair or site installation background. Key Engineering Services Manager responsibilities Lead the day-to-day activity of a busy engineering workshop. Manage a team of approximately 10 skilled tradespeople. Plan workshop workload and allocate labour effectively. Coordinate fitters, welders and installers for customer site work. Balance planned workshop jobs with urgent repairs, breakdowns and site requirements. Monitor job progress, priorities, quality and delivery expectations. Maintain strong health and safety standards across workshop and site activity. Manage team standards, performance and behaviour. Communicate clearly with the Managing Director, internal teams and customers where required. Keep the workshop organised, productive and commercially focused. Experience required Applicants must have experience managing a relevant engineering workshop, engineering services or site-support environment. Relevant backgrounds may include: Fabrication and welding businesses Engineering services companies Machine shops carrying out varied one-off, repair or batch work Industrial maintenance and mechanical service providers Pump, gearbox or mechanical refurbishment businesses Food, FMCG, utilities or process engineering contractors Businesses carrying out both workshop and customer site engineering work A strong fabrication and welding background would be particularly useful, as much of the customer site work is fabrication-led. Machining knowledge is also important, but this is more about understanding varied practical engineering jobs than managing a high-volume CNC production environment. Candidates from automotive will only be suitable if their background is genuinely relevant to fabrication, welding, machining, repair, refurbishment, site installation or practical engineering services. The person My client is looking for someone organised, practical and commercially aware, with the confidence to lead experienced tradespeople and make sensible decisions when priorities change. You will need to be comfortable balancing workshop jobs, customer site work, urgent repairs and breakdown requirements. This role will suit someone who can keep standards high, communicate clearly and bring structure to a busy engineering workshop and site services operation. Package 60,000 to 65,000 basic salary 500 per month car allowance Monday to Friday, days Core hours 8:00am to 5:00pm Flexibility required around customer work, urgent jobs and operational priorities If this Engineering Manager role is of interest to you, please click apply now below.
Mechanical Assemblers Wembley, London Proactive Global is hiring for experienced Mechanical Assemblers to work for manufacturing company based in Wembley, London, NW10. This position is well-suited to a person who is ideally having Mechanical assembly experience. Position is temp to perm for right candidates. Shift Timings: 08:00am-4:30pm Monday to Friday Location : London, NW10 Pay Rate : 13.50 - 15 per hour Responsibilities: Duties will include mechanical assembly and fitting of parts and components, following drawings and using a variety of hand and power tools Good Knowledge of hand power tools will be advantageous Candidates must have previous mechanical assembly experience We need someone who can use different type of tools Maintaining general cleanliness, and tidiness of the production area. If you are interested for the above mentioned role, contact Gaurvi Sharma at (url removed) or (phone number removed) alternatively, apply directly to this advert! Proactive Global is committed to equality in the workplace and is an equal opportunity employer. Proactive Global is acting as an Employment Business in relation to this vacancy.
Jun 13, 2026
Contractor
Mechanical Assemblers Wembley, London Proactive Global is hiring for experienced Mechanical Assemblers to work for manufacturing company based in Wembley, London, NW10. This position is well-suited to a person who is ideally having Mechanical assembly experience. Position is temp to perm for right candidates. Shift Timings: 08:00am-4:30pm Monday to Friday Location : London, NW10 Pay Rate : 13.50 - 15 per hour Responsibilities: Duties will include mechanical assembly and fitting of parts and components, following drawings and using a variety of hand and power tools Good Knowledge of hand power tools will be advantageous Candidates must have previous mechanical assembly experience We need someone who can use different type of tools Maintaining general cleanliness, and tidiness of the production area. If you are interested for the above mentioned role, contact Gaurvi Sharma at (url removed) or (phone number removed) alternatively, apply directly to this advert! Proactive Global is committed to equality in the workplace and is an equal opportunity employer. Proactive Global is acting as an Employment Business in relation to this vacancy.
Westray Recruitment Consultants Ltd
Knitsley, County Durham
WHAT IS IN IT FOR YOU? • Permanent role • Durham location • £17.29 ph (£33,265.96 pa) • 37 hours per week • Day Shift Only Mon to Fri 07:30-16:00 Fri 07:30-12:30 • Overtime Rate Applicable • Pension with company contribution • 25 days holiday, plus bank holidays • Death In Service Scheme • Income Protection Scheme • Cycle To Work Scheme • Travel allowance based on miles to work • Onsite parking THE BUSINESS Based in Consett, our client is a well-established and forward-thinking engineering business specialising in the reverse engineering and refurbishment of rotating equipment. Supporting a wide range of industrial sectors, they provide expert servicing, repair, and overhaul solutions across all types of pumps. With a strong reputation for technical excellence and reliability, the company is currently experiencing sustained growth and is at an exciting stage in its development. This is a great opportunity to join a skilled and supportive team where your expertise will be valued; and opportunities for progression are actively encouraged. THE ROLE • Carry out the disassembly, inspection, repair, and reassembly of rotating equipment, with a primary focus on pumps • Diagnose faults and identify root causes of equipment issues to support effective repairs • Work to agreed deadlines while maintaining high standards of workmanship • Ensure all tasks are completed in line with company procedures and relevant industry standards • Assist in compiling detailed service and inspection reports for customers • Collaborate with internal teams to resolve technical issues and improve processes • Contribute to a busy service department handling a wide range of equipment from a global customer base • Participate in team-based and cross-functional activities as required THE PERSON • Time-served fitter or engineer with relevant industry experience • Proven background in the servicing, assembly, and repair of pumps and rotating equipment • Strong fault-finding and problem-solving skills • Comfortable working in a fast-paced, varied environment • Flexible approach to work, with willingness to support overtime when needed • Reliable, honest, and committed to delivering high-quality work • Team player with good communication skills and a proactive attitude TO APPLY Please send your updated CV to Harry Mann or apply direct by calling Westray Recruitment Group
Jun 13, 2026
Full time
WHAT IS IN IT FOR YOU? • Permanent role • Durham location • £17.29 ph (£33,265.96 pa) • 37 hours per week • Day Shift Only Mon to Fri 07:30-16:00 Fri 07:30-12:30 • Overtime Rate Applicable • Pension with company contribution • 25 days holiday, plus bank holidays • Death In Service Scheme • Income Protection Scheme • Cycle To Work Scheme • Travel allowance based on miles to work • Onsite parking THE BUSINESS Based in Consett, our client is a well-established and forward-thinking engineering business specialising in the reverse engineering and refurbishment of rotating equipment. Supporting a wide range of industrial sectors, they provide expert servicing, repair, and overhaul solutions across all types of pumps. With a strong reputation for technical excellence and reliability, the company is currently experiencing sustained growth and is at an exciting stage in its development. This is a great opportunity to join a skilled and supportive team where your expertise will be valued; and opportunities for progression are actively encouraged. THE ROLE • Carry out the disassembly, inspection, repair, and reassembly of rotating equipment, with a primary focus on pumps • Diagnose faults and identify root causes of equipment issues to support effective repairs • Work to agreed deadlines while maintaining high standards of workmanship • Ensure all tasks are completed in line with company procedures and relevant industry standards • Assist in compiling detailed service and inspection reports for customers • Collaborate with internal teams to resolve technical issues and improve processes • Contribute to a busy service department handling a wide range of equipment from a global customer base • Participate in team-based and cross-functional activities as required THE PERSON • Time-served fitter or engineer with relevant industry experience • Proven background in the servicing, assembly, and repair of pumps and rotating equipment • Strong fault-finding and problem-solving skills • Comfortable working in a fast-paced, varied environment • Flexible approach to work, with willingness to support overtime when needed • Reliable, honest, and committed to delivering high-quality work • Team player with good communication skills and a proactive attitude TO APPLY Please send your updated CV to Harry Mann or apply direct by calling Westray Recruitment Group
AGRICULTURAL MECHANIC My client is searching for a Plant Mechanic / Agricultural Mechanic / Agricultural Service Technician near Bicester Oxfordshire Location of the Plant Mechanic / Plant Fitter / Agricultural Mechanic / Agricultural Engineer / Agricultural Service Technician / Fitter / Groundcare Technician / Agriculture Technician: Bicester / Oxfordshire area Please note this role is both workshop and site based. Salary of the Plant Mechanic / Plant Fitter / Agricultural Mechanic / Agricultural Engineer / Agricultural Service Technician / Fitter / Groundcare Technician / Agriculture Technician: 40,000.00 pa to 50,000.00 pa (depending on experience) NEGOTIABLE My client, a specialist in Agricultural Machinery and small plant equipment, are looking for an experienced Mechanic for their workshop and for site based work. The Role of the Plant Mechanic / Plant Fitter / Agricultural Mechanic / Agricultural Engineer / Agricultural Service Technician / Fitter / Groundcare Technician / Agriculture Technician: My client is looking for experienced mechanics to join their team in their workshop and to assist on site based work, based in Bicester area. This role consists of the repair, maintenance, assembly, and operation of various Ground care and Agricultural, equipment and vehicles. The Mechanics work as a team on a huge variety of equipment that pass through the work shop. They work closely with colleagues in the parts department to ensure timely, efficient, and quality repair and maintenance. Their mechanics also carry out mobile repairs on-site and are fully responsible for a company vehicle. They are looking for someone with experience and or qualifications in plant and or agricultural machinery in a mechanical capacity, this is an essential part of the role. The ability to plan and coordinate your own workload and work within a team. A full clean driving licence is also required. Required: Drivers Licence Experience with Plant / Agricultural Equipment / Groundcare Equipment ideally 3 years. If you feel that this role sounds great to you then please send your CV to Danica Baker at Sprint Recruitment
Jun 13, 2026
Full time
AGRICULTURAL MECHANIC My client is searching for a Plant Mechanic / Agricultural Mechanic / Agricultural Service Technician near Bicester Oxfordshire Location of the Plant Mechanic / Plant Fitter / Agricultural Mechanic / Agricultural Engineer / Agricultural Service Technician / Fitter / Groundcare Technician / Agriculture Technician: Bicester / Oxfordshire area Please note this role is both workshop and site based. Salary of the Plant Mechanic / Plant Fitter / Agricultural Mechanic / Agricultural Engineer / Agricultural Service Technician / Fitter / Groundcare Technician / Agriculture Technician: 40,000.00 pa to 50,000.00 pa (depending on experience) NEGOTIABLE My client, a specialist in Agricultural Machinery and small plant equipment, are looking for an experienced Mechanic for their workshop and for site based work. The Role of the Plant Mechanic / Plant Fitter / Agricultural Mechanic / Agricultural Engineer / Agricultural Service Technician / Fitter / Groundcare Technician / Agriculture Technician: My client is looking for experienced mechanics to join their team in their workshop and to assist on site based work, based in Bicester area. This role consists of the repair, maintenance, assembly, and operation of various Ground care and Agricultural, equipment and vehicles. The Mechanics work as a team on a huge variety of equipment that pass through the work shop. They work closely with colleagues in the parts department to ensure timely, efficient, and quality repair and maintenance. Their mechanics also carry out mobile repairs on-site and are fully responsible for a company vehicle. They are looking for someone with experience and or qualifications in plant and or agricultural machinery in a mechanical capacity, this is an essential part of the role. The ability to plan and coordinate your own workload and work within a team. A full clean driving licence is also required. Required: Drivers Licence Experience with Plant / Agricultural Equipment / Groundcare Equipment ideally 3 years. If you feel that this role sounds great to you then please send your CV to Danica Baker at Sprint Recruitment
Mechanical Fitter - Contract roles - 3 Months Fixed Term Mechanical Fitters required to join a busy workshop team at an established machine builder in Telford. This is a hands-on role offering variety, responsibility, and the opportunity to work on hydraulics and machinery from build through to test. Excellent pay and benefits with plenty of overtime to boost earnings. Location: Telford Hours: Days Mon - Friday Friday - Early finish As Mechanical Fitter, duties will include: You will be responsible for the assembly, setting, and testing of machines, working from engineering drawings and hydraulic schematics to deliver a high-quality end product. • Mechanical fitting and assembly from drawings • Installation of hydraulic components and pipework • Machine setting, testing, and fault finding • Use of hand tools, power tools, and lifting equipment • Working to tight schedules while maintaining quality and safety standards • Supporting apprentices and sharing best practice • Maintaining accurate timesheets and workshop standards • Representing the company professionally on site and with customers Relevant skills and experience: • Apprenticeship in Mechanical Engineering and/or NVQ Level 3 (or equivalent experience) • Proven experience in mechanical fitting within machine building or component assembly industry • Ability to read engineering drawings and hydraulic schematics • Strong problem-solving and teamwork skills • A proactive, safety-focused approach You will have current or recent experience as a bench fitter, maintenance fitter, multi-skilled fitter, mechanical assembler, Mechanical technician, Hydraulic fitter, hydraulic engineer, test repair technician or mechanical maintenance engineer In return: • Varied and challenging work on bespoke machinery • Supportive team environment • Hourly rate of around £17 - 18/hr plus regular overtime paid after 38 hours earning you £900/ week • Fixed term contract direct with company If you're a motivated Mechanical Fitter / Tester who takes pride in quality workmanship and Teamwork APPLY TODAY Your CV will be forwarded to Jonathan Lee Recruitment, a leading engineering and manufacturing recruitment consultancy established in 1978. The services advertised by Jonathan Lee Recruitment are those of an Employment Agency. In order for your CV to be processed effectively, please ensure your name, email address, phone number and location (post code OR town OR county, as a minimum) are included.
Jun 13, 2026
Full time
Mechanical Fitter - Contract roles - 3 Months Fixed Term Mechanical Fitters required to join a busy workshop team at an established machine builder in Telford. This is a hands-on role offering variety, responsibility, and the opportunity to work on hydraulics and machinery from build through to test. Excellent pay and benefits with plenty of overtime to boost earnings. Location: Telford Hours: Days Mon - Friday Friday - Early finish As Mechanical Fitter, duties will include: You will be responsible for the assembly, setting, and testing of machines, working from engineering drawings and hydraulic schematics to deliver a high-quality end product. • Mechanical fitting and assembly from drawings • Installation of hydraulic components and pipework • Machine setting, testing, and fault finding • Use of hand tools, power tools, and lifting equipment • Working to tight schedules while maintaining quality and safety standards • Supporting apprentices and sharing best practice • Maintaining accurate timesheets and workshop standards • Representing the company professionally on site and with customers Relevant skills and experience: • Apprenticeship in Mechanical Engineering and/or NVQ Level 3 (or equivalent experience) • Proven experience in mechanical fitting within machine building or component assembly industry • Ability to read engineering drawings and hydraulic schematics • Strong problem-solving and teamwork skills • A proactive, safety-focused approach You will have current or recent experience as a bench fitter, maintenance fitter, multi-skilled fitter, mechanical assembler, Mechanical technician, Hydraulic fitter, hydraulic engineer, test repair technician or mechanical maintenance engineer In return: • Varied and challenging work on bespoke machinery • Supportive team environment • Hourly rate of around £17 - 18/hr plus regular overtime paid after 38 hours earning you £900/ week • Fixed term contract direct with company If you're a motivated Mechanical Fitter / Tester who takes pride in quality workmanship and Teamwork APPLY TODAY Your CV will be forwarded to Jonathan Lee Recruitment, a leading engineering and manufacturing recruitment consultancy established in 1978. The services advertised by Jonathan Lee Recruitment are those of an Employment Agency. In order for your CV to be processed effectively, please ensure your name, email address, phone number and location (post code OR town OR county, as a minimum) are included.
Tooling & Technical Support Engineer Location Rochdale £45,000 per annum Full Time Days with an early finish on Fridays An exciting opportunity has arisen for an experienced Tooling & Technical Support Engineer to join a busy technical department in a varied and hands-on engineering role. This position combines tooling repair and modification work with wider engineering and technical support responsibilities for post-moulding operations. Reporting directly to the Technical Director, the successful candidate will work closely with both internal departments and external suppliers to support production efficiency, tooling performance, and continuous improvement initiatives. The Tooling & Technical Support Engineer role is predominantly shop floor based, with occasional travel within the UK and very occasional overseas travel. This opportunity would suit a time-served Toolmaker or Tool Fitter who has progressed into a supervisory or foreman-level position and is now looking to move into a broader technical role with long-term development prospects. Tooling & Technical Support Engineer Key Responsibilities Manage, prioritise, and carry out tooling repairs, insert changes, and modifications Strip, assess, and commission new tooling to required operational standards Support the sampling and development of new tooling and implement modifications where necessary Prioritise and allocate work to engineering personnel Identify and source replacement parts, tooling, and consumables Obtain and assess quotations for tooling repairs and modifications Manage and prioritise jig, fixture, and stillage requirements Oversee and carry out repairs and modifications to stillage, bonding, assembly, routing, and machining fixtures Liaise with production and technical sales teams to coordinate tooling availability and production schedules Manage subcontractors and monitor the quality of externally completed tooling and fixture work Commission new production tooling, stillage, and fixtures Reverse engineer bespoke tooling requirements and maintain critical spare parts where required Specify, source, and introduce tooling solutions for post-moulding operations Design and manufacture post-moulding fixtures where necessary Evaluate and improve current production processes through tooling and fixture enhancements Assess new product lines and determine tooling, fixture, stillage, and process requirements Tooling & Technical Support Engineer Candidate Requirements Time-served Toolmaker, Tool Fitter, or similar engineering background Previous experience within tooling repair, modification, and maintenance Supervisory or team leadership experience preferred Strong understanding of engineering drawings and manufacturing processes Ability to manage workloads and prioritise effectively Good communication and organisational skills Hands-on approach with strong problem-solving ability Experience working within manufacturing or production environments What s on Offer for a Tooling & Technical Support Engineer £45,000 salary Early finish on Fridays Long-term career progression opportunities Varied and technically challenging role Opportunity to work closely with senior technical management Please apply online for this Tooling & Technical Support Engineer position To view more jobs from Bamford Contract Services, Find us on Facebook bamfordcs or follow us on Twitter bamfordcs.
Jun 13, 2026
Full time
Tooling & Technical Support Engineer Location Rochdale £45,000 per annum Full Time Days with an early finish on Fridays An exciting opportunity has arisen for an experienced Tooling & Technical Support Engineer to join a busy technical department in a varied and hands-on engineering role. This position combines tooling repair and modification work with wider engineering and technical support responsibilities for post-moulding operations. Reporting directly to the Technical Director, the successful candidate will work closely with both internal departments and external suppliers to support production efficiency, tooling performance, and continuous improvement initiatives. The Tooling & Technical Support Engineer role is predominantly shop floor based, with occasional travel within the UK and very occasional overseas travel. This opportunity would suit a time-served Toolmaker or Tool Fitter who has progressed into a supervisory or foreman-level position and is now looking to move into a broader technical role with long-term development prospects. Tooling & Technical Support Engineer Key Responsibilities Manage, prioritise, and carry out tooling repairs, insert changes, and modifications Strip, assess, and commission new tooling to required operational standards Support the sampling and development of new tooling and implement modifications where necessary Prioritise and allocate work to engineering personnel Identify and source replacement parts, tooling, and consumables Obtain and assess quotations for tooling repairs and modifications Manage and prioritise jig, fixture, and stillage requirements Oversee and carry out repairs and modifications to stillage, bonding, assembly, routing, and machining fixtures Liaise with production and technical sales teams to coordinate tooling availability and production schedules Manage subcontractors and monitor the quality of externally completed tooling and fixture work Commission new production tooling, stillage, and fixtures Reverse engineer bespoke tooling requirements and maintain critical spare parts where required Specify, source, and introduce tooling solutions for post-moulding operations Design and manufacture post-moulding fixtures where necessary Evaluate and improve current production processes through tooling and fixture enhancements Assess new product lines and determine tooling, fixture, stillage, and process requirements Tooling & Technical Support Engineer Candidate Requirements Time-served Toolmaker, Tool Fitter, or similar engineering background Previous experience within tooling repair, modification, and maintenance Supervisory or team leadership experience preferred Strong understanding of engineering drawings and manufacturing processes Ability to manage workloads and prioritise effectively Good communication and organisational skills Hands-on approach with strong problem-solving ability Experience working within manufacturing or production environments What s on Offer for a Tooling & Technical Support Engineer £45,000 salary Early finish on Fridays Long-term career progression opportunities Varied and technically challenging role Opportunity to work closely with senior technical management Please apply online for this Tooling & Technical Support Engineer position To view more jobs from Bamford Contract Services, Find us on Facebook bamfordcs or follow us on Twitter bamfordcs.
An opportunity has arisen with my client for an Electrical Fitter to join them on a 12-month contract. As the Electrical Fitter you will be responsible for carrying out manufacturing and test tasks within the electrical department, in accordance with product certification procedures, defined workmanship standards, allocated budgets and timescales to meet project objectives. Role: Electrical Fitter Pay: 28.35 per hour via umbrella (rising to 29.70 per hour after 12 weeks) Location: Bolton Contract: 12 Months Hours: Monday - Friday, 37 hours per week Security Clearance: BPSS Responsibilities: Certify the product in line with Product Certification procedure. Demonstrated ability / willingness to certify own work in line with company quality standards. Maintain product certification and approval via regular audits. Possess a versatile skill base with the capability to apply these skills across a range of tasks. Be fully conversant with all equipment, tools and measuring instruments associated with the manufacturing cycle. Ensure manufacturing build, inspection and where relevant test times are met. Check and complete all paperwork associated with the manufacturing data pack. Maintain to the highest level, workmanship standards and product quality. Ensure compliance with all associated procedures applicable to the manufacturing process. Maintain a safe working environment. Maintain a good housekeeping policy. Willing to contribute to an environment of process improvement Education/Qualifications Approved Apprenticeship/Apprenticeship Framework/Modern Apprenticeship OR Vocational G or H Units with Further Education, City & Guilds Parts 1, 2 & 3 OR Vocational TR23 Units with Further Education, ONC or City & Guilds Parts 1, 2 & 3 OR Vocational NVQ3 with Further Education, BTEC ONC/HNC Skills/Experince IPC 610 certified/ trained preferred. Possess experience in electrical wiring and assembly. Previous experience in the aerospace or defence industry would be desirable. Manual handling training. Lifting and slinging (including overhead cranes) training. ESD training. Please send your updated CV to: Natalie Dalkin at Line Up Aviation Line Up Aviation has carved its own place in the recruitment of Aviation and Aerospace personnel all over the world for more than 30 years. We work with some of the industry's best-known companies who demand the highest standard of applicants. " on Twitter for all of our latest vacancies, news and pictures from our busy UK Head Office. Interact with us using the tag at anytime! Thank you for your follow!"
Jun 13, 2026
Contractor
An opportunity has arisen with my client for an Electrical Fitter to join them on a 12-month contract. As the Electrical Fitter you will be responsible for carrying out manufacturing and test tasks within the electrical department, in accordance with product certification procedures, defined workmanship standards, allocated budgets and timescales to meet project objectives. Role: Electrical Fitter Pay: 28.35 per hour via umbrella (rising to 29.70 per hour after 12 weeks) Location: Bolton Contract: 12 Months Hours: Monday - Friday, 37 hours per week Security Clearance: BPSS Responsibilities: Certify the product in line with Product Certification procedure. Demonstrated ability / willingness to certify own work in line with company quality standards. Maintain product certification and approval via regular audits. Possess a versatile skill base with the capability to apply these skills across a range of tasks. Be fully conversant with all equipment, tools and measuring instruments associated with the manufacturing cycle. Ensure manufacturing build, inspection and where relevant test times are met. Check and complete all paperwork associated with the manufacturing data pack. Maintain to the highest level, workmanship standards and product quality. Ensure compliance with all associated procedures applicable to the manufacturing process. Maintain a safe working environment. Maintain a good housekeeping policy. Willing to contribute to an environment of process improvement Education/Qualifications Approved Apprenticeship/Apprenticeship Framework/Modern Apprenticeship OR Vocational G or H Units with Further Education, City & Guilds Parts 1, 2 & 3 OR Vocational TR23 Units with Further Education, ONC or City & Guilds Parts 1, 2 & 3 OR Vocational NVQ3 with Further Education, BTEC ONC/HNC Skills/Experince IPC 610 certified/ trained preferred. Possess experience in electrical wiring and assembly. Previous experience in the aerospace or defence industry would be desirable. Manual handling training. Lifting and slinging (including overhead cranes) training. ESD training. Please send your updated CV to: Natalie Dalkin at Line Up Aviation Line Up Aviation has carved its own place in the recruitment of Aviation and Aerospace personnel all over the world for more than 30 years. We work with some of the industry's best-known companies who demand the highest standard of applicants. " on Twitter for all of our latest vacancies, news and pictures from our busy UK Head Office. Interact with us using the tag at anytime! Thank you for your follow!"
Our client is a well-established and successful manufacturer, they are looking for experienced Auto Electricians or Hydraulic Fitters to join them as an Electrical & Hydraulic Fitter. PLEASE ONLY APPLY IF YOU MEET THE FOLLOWING REQUIREMENTS: Skilled in either electrical or hydraulic fitting and electro-mechanical assembly techniques (Automotive) You will have Auto-Electrical qualifications, if you have completed training courses in fitting, hydraulics, pneumatics it would be an advantage Ability to read electrical and hydraulic drawings Knowledge of CANbus systems Two years experience of working in a manufacturing environment in a similar role Experience in production projects and Continuous Improvement Ability to read and understand engineering build specifications You are available for overtime during the week, Fridays, and weekends on occasions Salary: Up to £17.24 per hour + Overtime Hours of Work: 40 hours per week. Monday to Thursday 6:00am to 4:30pm Responsibilities: Responsible for assembling and fitting electrical and hydraulic systems to high standards Read and interpret electrical and hydraulic drawings Ensure all work meets build specifications and quality expectations in line with BS EN ISO 9001 Carry out electrical and hydraulic fitting and electro-mechanical assembly Take ownership of your own quality and workmanship Promote good housekeeping and follow all health and safety procedures Support team members and assist with planning and continuous improvement Be flexible and willing to move between departments as needed Maintain punctuality, discipline, and a positive, can-do attitude This role would suit someone with Auto Electrical and Mechanical Fitting skills, e.g. Electro-Mechanical Engineer / Electromechanical Technician / Auto Electrician / Automotive Technician / Electrical Engineer / Multiskilled Engineer / Multi Skilled Technician / Vehicle Technician / Coach Builder / Electrical Assembler / Mechanical Fitter / Coachbuilder / Electrical Fitter / Hydraulics Fitter / HGV Fitter / HGV Technician / HGV Mechanic / Plant Fitter / Plant Mechanic / Plant Fitter / Plant Technician / etc.
Jun 12, 2026
Full time
Our client is a well-established and successful manufacturer, they are looking for experienced Auto Electricians or Hydraulic Fitters to join them as an Electrical & Hydraulic Fitter. PLEASE ONLY APPLY IF YOU MEET THE FOLLOWING REQUIREMENTS: Skilled in either electrical or hydraulic fitting and electro-mechanical assembly techniques (Automotive) You will have Auto-Electrical qualifications, if you have completed training courses in fitting, hydraulics, pneumatics it would be an advantage Ability to read electrical and hydraulic drawings Knowledge of CANbus systems Two years experience of working in a manufacturing environment in a similar role Experience in production projects and Continuous Improvement Ability to read and understand engineering build specifications You are available for overtime during the week, Fridays, and weekends on occasions Salary: Up to £17.24 per hour + Overtime Hours of Work: 40 hours per week. Monday to Thursday 6:00am to 4:30pm Responsibilities: Responsible for assembling and fitting electrical and hydraulic systems to high standards Read and interpret electrical and hydraulic drawings Ensure all work meets build specifications and quality expectations in line with BS EN ISO 9001 Carry out electrical and hydraulic fitting and electro-mechanical assembly Take ownership of your own quality and workmanship Promote good housekeeping and follow all health and safety procedures Support team members and assist with planning and continuous improvement Be flexible and willing to move between departments as needed Maintain punctuality, discipline, and a positive, can-do attitude This role would suit someone with Auto Electrical and Mechanical Fitting skills, e.g. Electro-Mechanical Engineer / Electromechanical Technician / Auto Electrician / Automotive Technician / Electrical Engineer / Multiskilled Engineer / Multi Skilled Technician / Vehicle Technician / Coach Builder / Electrical Assembler / Mechanical Fitter / Coachbuilder / Electrical Fitter / Hydraulics Fitter / HGV Fitter / HGV Technician / HGV Mechanic / Plant Fitter / Plant Mechanic / Plant Fitter / Plant Technician / etc.
Mechanical Technician - Training To Technical Support Engineer 30,000 + Early Friday Finish + Training + Development Monday - Thursday, 08:00 - 16:30, Friday, 08:00 - 15:15 Near Pocklington - Commutable From: Melbourne, Market Weighton, Seaton Ross & York Do you have strong communication, hand tools & mechanical experience? Are you able to read engineering drawings? Do you want a new role within an industry leading manufacturing company who can provide first class training and development to move you into a technical support role? Due to continued growth, my client is looking for a Mechanical Technician to join the team at their state of the art facility near Pocklington. The successful applicant will come from an assembly/mechanical engineering background and will have access to an excellent in house training platform. Once trained you will be able to inspect & sign off finished machinery, report back any potential quality issues and work with the engineering teams to implement potential changes. You will also become a technical point of contact for customers, understanding the products so that you can understand enquiries and provide possible solutions & support. This is an excellent opportunity to join an industry leading manufacturer who have been at the forefront of their industry for over 30 years! With an excellent staff retention rate and first class training on offer, this is a great time to join a business specialising in the design, build and transport of valuable special purpose machinery. For more information please click apply and contact Patrick Walsh - REF 5131 - (phone number removed) The Role: Revieing special purpose machinery, working with in house teams to report any issues A technical point of contact for customers An excellent training platform in place The Candidate: Mechanical assembly/fitter experience Has strong communication skills A commutable distance to Pocklington Consultant: Patrick Walsh elix Sourcing Solutions is a specialist recruiter for Engineering, IT and Science roles ranging from mid to senior level positions. Please be aware that we will only accept applications from candidates that have a valid work permit to work in the UK. By applying to this job you are confirming that you do not hold a criminal record and that you know of no legal reason why you would be ineligible for employment. Assembler Machinery SPM Special Purpose Machinery Technical Support Training Welder Fabricator Welding TIG MIG ARC STICK MMA Fitter Mechanical Technician Engineer Manufacturing Manufacturer Manufactured York Yorkshire Pocklington Melbourne Market Weighton Shipton Thorpe INDLP
Jun 12, 2026
Full time
Mechanical Technician - Training To Technical Support Engineer 30,000 + Early Friday Finish + Training + Development Monday - Thursday, 08:00 - 16:30, Friday, 08:00 - 15:15 Near Pocklington - Commutable From: Melbourne, Market Weighton, Seaton Ross & York Do you have strong communication, hand tools & mechanical experience? Are you able to read engineering drawings? Do you want a new role within an industry leading manufacturing company who can provide first class training and development to move you into a technical support role? Due to continued growth, my client is looking for a Mechanical Technician to join the team at their state of the art facility near Pocklington. The successful applicant will come from an assembly/mechanical engineering background and will have access to an excellent in house training platform. Once trained you will be able to inspect & sign off finished machinery, report back any potential quality issues and work with the engineering teams to implement potential changes. You will also become a technical point of contact for customers, understanding the products so that you can understand enquiries and provide possible solutions & support. This is an excellent opportunity to join an industry leading manufacturer who have been at the forefront of their industry for over 30 years! With an excellent staff retention rate and first class training on offer, this is a great time to join a business specialising in the design, build and transport of valuable special purpose machinery. For more information please click apply and contact Patrick Walsh - REF 5131 - (phone number removed) The Role: Revieing special purpose machinery, working with in house teams to report any issues A technical point of contact for customers An excellent training platform in place The Candidate: Mechanical assembly/fitter experience Has strong communication skills A commutable distance to Pocklington Consultant: Patrick Walsh elix Sourcing Solutions is a specialist recruiter for Engineering, IT and Science roles ranging from mid to senior level positions. Please be aware that we will only accept applications from candidates that have a valid work permit to work in the UK. By applying to this job you are confirming that you do not hold a criminal record and that you know of no legal reason why you would be ineligible for employment. Assembler Machinery SPM Special Purpose Machinery Technical Support Training Welder Fabricator Welding TIG MIG ARC STICK MMA Fitter Mechanical Technician Engineer Manufacturing Manufacturer Manufactured York Yorkshire Pocklington Melbourne Market Weighton Shipton Thorpe INDLP
Our client is a successful and well-established automotive company that is going from strength to strength. They are looking for an experienced and skilled Panel Beater / MET Technician to join their team. You will ensure the repair of motor vehicles of all types is carried out to motor manufacturer industry standards or repair methods. Salary: Circa £55,000 depending on experience + Bonus (Higher salary may be available for very experienced individuals - up to £60,000) Hours of work (to be confirmed): 8:00am 5:30pm, Monday to Friday, possibly 1 Saturday a month if targets not hit. PLEASE ONLY APPLY IF YOU HAVE THE FOLLOWING EXPERIENCE: Previous recent experience as a Panel Beater, including welding Current AOM009 welding certificate, or BS equivalent Training in MIG braze, spot welding, rivet and bonding, high strength and Boron steel awareness Motor manufacturer s qualifications and experience Light MET qualification linked to ATA Bonding certification Full UK Driving licence Responsibilities include: Strip & refit where necessary including adjustment and panel alignment. Report any defects or damage linked to associated job but not down for repair. Observe, recognise and report on vehicle structure and paintwork. Ensure that vehicles comply with safety standards when returned to customers, or that faults have been reported and noted on the job card. Removal and safe storage of vehicle components, fluids and gases as directed. Removal and safe disposal of vehicle components and fluids as directed. Quality control of all repairs, with final stage sign off. Report all faults, defects noticed whilst working on vehicles not apparent before dismantling. Actively make sure the repair method is in the job pack and is fully read, understood (e-scribe, manufacturer or other source) and displayed with the vehicle at all times. It is also your duty to sign off the Quality Control section of the Repair Inspection sheet at your and other operatives relevant repair stage. Ensure seat covers & foot mats are in place on all vehicles being worked on and soft top vehicles are protected. Panel alignment and adjacent components. Filler repairs & finished correctly in P180 and pinholes are checked. Underseal, weld through primers, anti-corrosion measures are complete before next stage. Benefits include, but are not limited to: Healthcare Cash Plan (including Gym and shopping discounts) Life Assurance Equipment purchase Scheme Celebration Day (to use as you wish to celebrate a significant day in your life) Car Insurance discount Employee Pension Cycle to Work Scheme Refer a Friend Scheme (earn £1,000 for referring people to join the team) This job will suit someone who has extensive experience as a Panel Beater or is skilled in Panel Beating, any additional automotive bodywork related background would be an advantage. Previous job titles could include; MET Technician / Panel Technician / Coach Builder / Vehicle Assembler / Vehicle Assembly Operative / Paint Sprayer / Vinyl Wrapper / Vinyl Wrapping Operative / Bodywork Technician / Vehicle Damage Panel Technician / Automotive Body Repairer / Body Shop Technician / Auto Body Technician / Motor Vehicle Body Repairer / Smash Repairer / Collision Repair Technician / Body Repair & Fit / Strip Fitter / Body-line Finisher / Dent Remover / Vehicle Welder / etc.
Jun 12, 2026
Full time
Our client is a successful and well-established automotive company that is going from strength to strength. They are looking for an experienced and skilled Panel Beater / MET Technician to join their team. You will ensure the repair of motor vehicles of all types is carried out to motor manufacturer industry standards or repair methods. Salary: Circa £55,000 depending on experience + Bonus (Higher salary may be available for very experienced individuals - up to £60,000) Hours of work (to be confirmed): 8:00am 5:30pm, Monday to Friday, possibly 1 Saturday a month if targets not hit. PLEASE ONLY APPLY IF YOU HAVE THE FOLLOWING EXPERIENCE: Previous recent experience as a Panel Beater, including welding Current AOM009 welding certificate, or BS equivalent Training in MIG braze, spot welding, rivet and bonding, high strength and Boron steel awareness Motor manufacturer s qualifications and experience Light MET qualification linked to ATA Bonding certification Full UK Driving licence Responsibilities include: Strip & refit where necessary including adjustment and panel alignment. Report any defects or damage linked to associated job but not down for repair. Observe, recognise and report on vehicle structure and paintwork. Ensure that vehicles comply with safety standards when returned to customers, or that faults have been reported and noted on the job card. Removal and safe storage of vehicle components, fluids and gases as directed. Removal and safe disposal of vehicle components and fluids as directed. Quality control of all repairs, with final stage sign off. Report all faults, defects noticed whilst working on vehicles not apparent before dismantling. Actively make sure the repair method is in the job pack and is fully read, understood (e-scribe, manufacturer or other source) and displayed with the vehicle at all times. It is also your duty to sign off the Quality Control section of the Repair Inspection sheet at your and other operatives relevant repair stage. Ensure seat covers & foot mats are in place on all vehicles being worked on and soft top vehicles are protected. Panel alignment and adjacent components. Filler repairs & finished correctly in P180 and pinholes are checked. Underseal, weld through primers, anti-corrosion measures are complete before next stage. Benefits include, but are not limited to: Healthcare Cash Plan (including Gym and shopping discounts) Life Assurance Equipment purchase Scheme Celebration Day (to use as you wish to celebrate a significant day in your life) Car Insurance discount Employee Pension Cycle to Work Scheme Refer a Friend Scheme (earn £1,000 for referring people to join the team) This job will suit someone who has extensive experience as a Panel Beater or is skilled in Panel Beating, any additional automotive bodywork related background would be an advantage. Previous job titles could include; MET Technician / Panel Technician / Coach Builder / Vehicle Assembler / Vehicle Assembly Operative / Paint Sprayer / Vinyl Wrapper / Vinyl Wrapping Operative / Bodywork Technician / Vehicle Damage Panel Technician / Automotive Body Repairer / Body Shop Technician / Auto Body Technician / Motor Vehicle Body Repairer / Smash Repairer / Collision Repair Technician / Body Repair & Fit / Strip Fitter / Body-line Finisher / Dent Remover / Vehicle Welder / etc.
Our client is a successful and well-established automotive company that is going from strength to strength. They are looking for an experienced and skilled Panel Beater / MET Technician to join their team. You will ensure the repair of motor vehicles of all types is carried out to motor manufacturer industry standards or repair methods. Salary: Circa £55,000 depending on experience + Bonus (Higher salary may be available for very experienced individuals - up to £60,000) Hours of work (to be confirmed): 8:00am 5:30pm, Monday to Friday, possibly 1 Saturday a month if targets not hit. PLEASE ONLY APPLY IF YOU HAVE THE FOLLOWING EXPERIENCE: Previous recent experience as a Panel Beater, including welding Current AOM009 welding certificate, or BS equivalent Training in MIG braze, spot welding, rivet and bonding, high strength and Boron steel awareness Motor manufacturer s qualifications and experience Light MET qualification linked to ATA Bonding certification Full UK Driving licence Responsibilities include: Strip & refit where necessary including adjustment and panel alignment. Report any defects or damage linked to associated job but not down for repair. Observe, recognise and report on vehicle structure and paintwork. Ensure that vehicles comply with safety standards when returned to customers, or that faults have been reported and noted on the job card. Removal and safe storage of vehicle components, fluids and gases as directed. Removal and safe disposal of vehicle components and fluids as directed. Quality control of all repairs, with final stage sign off. Report all faults, defects noticed whilst working on vehicles not apparent before dismantling. Actively make sure the repair method is in the job pack and is fully read, understood (e-scribe, manufacturer or other source) and displayed with the vehicle at all times. It is also your duty to sign off the Quality Control section of the Repair Inspection sheet at your and other operatives relevant repair stage. Ensure seat covers & foot mats are in place on all vehicles being worked on and soft top vehicles are protected. Panel alignment and adjacent components. Filler repairs & finished correctly in P180 and pinholes are checked. Underseal, weld through primers, anti-corrosion measures are complete before next stage. Benefits include, but are not limited to: Healthcare Cash Plan (including Gym and shopping discounts) Life Assurance Equipment purchase Scheme Celebration Day (to use as you wish to celebrate a significant day in your life) Car Insurance discount Employee Pension Cycle to Work Scheme Refer a Friend Scheme (earn £1,000 for referring people to join the team) This job will suit someone who has extensive experience as a Panel Beater or is skilled in Panel Beating, any additional automotive bodywork related background would be an advantage. Previous job titles could include; MET Technician / Panel Technician / Coach Builder / Vehicle Assembler / Vehicle Assembly Operative / Paint Sprayer / Vinyl Wrapper / Vinyl Wrapping Operative / Bodywork Technician / Vehicle Damage Panel Technician / Automotive Body Repairer / Body Shop Technician / Auto Body Technician / Motor Vehicle Body Repairer / Smash Repairer / Collision Repair Technician / Body Repair & Fit / Strip Fitter / Body-line Finisher / Dent Remover / Vehicle Welder / etc.
Jun 12, 2026
Full time
Our client is a successful and well-established automotive company that is going from strength to strength. They are looking for an experienced and skilled Panel Beater / MET Technician to join their team. You will ensure the repair of motor vehicles of all types is carried out to motor manufacturer industry standards or repair methods. Salary: Circa £55,000 depending on experience + Bonus (Higher salary may be available for very experienced individuals - up to £60,000) Hours of work (to be confirmed): 8:00am 5:30pm, Monday to Friday, possibly 1 Saturday a month if targets not hit. PLEASE ONLY APPLY IF YOU HAVE THE FOLLOWING EXPERIENCE: Previous recent experience as a Panel Beater, including welding Current AOM009 welding certificate, or BS equivalent Training in MIG braze, spot welding, rivet and bonding, high strength and Boron steel awareness Motor manufacturer s qualifications and experience Light MET qualification linked to ATA Bonding certification Full UK Driving licence Responsibilities include: Strip & refit where necessary including adjustment and panel alignment. Report any defects or damage linked to associated job but not down for repair. Observe, recognise and report on vehicle structure and paintwork. Ensure that vehicles comply with safety standards when returned to customers, or that faults have been reported and noted on the job card. Removal and safe storage of vehicle components, fluids and gases as directed. Removal and safe disposal of vehicle components and fluids as directed. Quality control of all repairs, with final stage sign off. Report all faults, defects noticed whilst working on vehicles not apparent before dismantling. Actively make sure the repair method is in the job pack and is fully read, understood (e-scribe, manufacturer or other source) and displayed with the vehicle at all times. It is also your duty to sign off the Quality Control section of the Repair Inspection sheet at your and other operatives relevant repair stage. Ensure seat covers & foot mats are in place on all vehicles being worked on and soft top vehicles are protected. Panel alignment and adjacent components. Filler repairs & finished correctly in P180 and pinholes are checked. Underseal, weld through primers, anti-corrosion measures are complete before next stage. Benefits include, but are not limited to: Healthcare Cash Plan (including Gym and shopping discounts) Life Assurance Equipment purchase Scheme Celebration Day (to use as you wish to celebrate a significant day in your life) Car Insurance discount Employee Pension Cycle to Work Scheme Refer a Friend Scheme (earn £1,000 for referring people to join the team) This job will suit someone who has extensive experience as a Panel Beater or is skilled in Panel Beating, any additional automotive bodywork related background would be an advantage. Previous job titles could include; MET Technician / Panel Technician / Coach Builder / Vehicle Assembler / Vehicle Assembly Operative / Paint Sprayer / Vinyl Wrapper / Vinyl Wrapping Operative / Bodywork Technician / Vehicle Damage Panel Technician / Automotive Body Repairer / Body Shop Technician / Auto Body Technician / Motor Vehicle Body Repairer / Smash Repairer / Collision Repair Technician / Body Repair & Fit / Strip Fitter / Body-line Finisher / Dent Remover / Vehicle Welder / etc.
Site Fitter UK Wide Travel Based from Heywood, Greater Manchester Competitive Salary + Overtime + Expenses Full Time Permanent Site Fitters Wanted - Immediate Starts Available Are you an experienced Site Fitter looking for your next challenge? We're recruiting for two Site Fitters to join a growing installation team working on projects throughout the UK. This is an excellent opportunity to join a well-established engineering manufacturer supplying specialist equipment to the healthcare, pharmaceutical and laboratory sectors. You'll be installing bespoke equipment, ductwork and extraction systems on customer sites nationwide, working on a variety of new build and refurbishment projects. The Role Installation of specialist equipment, ductwork and extraction systems Working on customer sites across the UK Installation work within laboratories, healthcare and commercial environments Using hand and power tools to assemble and install equipment Working from engineering drawings and site instructions Supporting the Site Supervisor and wider installation team Ensuring all work is completed safely and to a high standard What We're Looking For Previous site fitting, mechanical fitting, installation or construction experience CSCS Card (essential) DBS is desirable Full UK Driving Licence Own transport Experience using hand and power tools Comfortable working away from home Monday to Friday (typically 4 nights per week) Highly Desirable Experience installing ductwork or extraction systems Previous fume cupboard installation experience Mechanical assembly or engineering background What's On Offer Long-term project work Opportunity to work on specialist engineering installations Overtime opportunities Expenses covered when working away Career development and training opportunities Supportive and growing team environment If you're a hands-on Site Fitter, Mechanical Fitter, Installation Engineer or Ductwork Installer looking for your next opportunity, we'd like to hear from you. Apply today with your CV for immediate consideration. Call Sue on (phone number removed)
Jun 11, 2026
Contractor
Site Fitter UK Wide Travel Based from Heywood, Greater Manchester Competitive Salary + Overtime + Expenses Full Time Permanent Site Fitters Wanted - Immediate Starts Available Are you an experienced Site Fitter looking for your next challenge? We're recruiting for two Site Fitters to join a growing installation team working on projects throughout the UK. This is an excellent opportunity to join a well-established engineering manufacturer supplying specialist equipment to the healthcare, pharmaceutical and laboratory sectors. You'll be installing bespoke equipment, ductwork and extraction systems on customer sites nationwide, working on a variety of new build and refurbishment projects. The Role Installation of specialist equipment, ductwork and extraction systems Working on customer sites across the UK Installation work within laboratories, healthcare and commercial environments Using hand and power tools to assemble and install equipment Working from engineering drawings and site instructions Supporting the Site Supervisor and wider installation team Ensuring all work is completed safely and to a high standard What We're Looking For Previous site fitting, mechanical fitting, installation or construction experience CSCS Card (essential) DBS is desirable Full UK Driving Licence Own transport Experience using hand and power tools Comfortable working away from home Monday to Friday (typically 4 nights per week) Highly Desirable Experience installing ductwork or extraction systems Previous fume cupboard installation experience Mechanical assembly or engineering background What's On Offer Long-term project work Opportunity to work on specialist engineering installations Overtime opportunities Expenses covered when working away Career development and training opportunities Supportive and growing team environment If you're a hands-on Site Fitter, Mechanical Fitter, Installation Engineer or Ductwork Installer looking for your next opportunity, we'd like to hear from you. Apply today with your CV for immediate consideration. Call Sue on (phone number removed)
Vehicle Strip/Fitter Location: Grimsby (DN31) Pay: 16.75 per hour Shifts: 4 on 4 off Hours: 06:00-18:00 Contract: Temp to Perm after 12 weeks (subject to performance and attendance) GI Group Humber are recruiting an experienced Vehicle Strip/Fitter for our automotive client based in Grimsby (DN31) . This is an excellent opportunity for a bodyshop professional looking for stable work and a long-term role. Pay & Hours 16.75 per hour 4 on 4 off shift pattern 06:00-18:00 Temp to perm after 12 weeks (performance/attendance dependent) Key Responsibilities Duties will include (but are not limited to): Stripping and refitting vehicles, including removing/replacing panels, bumpers, lights, door handles and interior trim Handling minor mechanical, electrical and trim components during strip/refit Ensuring excellent component care by labelling, organising and storing parts correctly for efficient reassembly Working to set processes and quality standards, ensuring health & safety is followed at all times Requirements To be considered, you must have: Full UK Driving Licence held for at least 2 years Aged 22+ No points/endorsements (up to 3 points may be accepted depending on code) Proven experience as a Vehicle Strip/Fitter (or similar bodyshop role) - essential (client requirement) Good attention to detail and ability to follow procedures Reliable and able to work the 4 on 4 off shift rotation Benefits Competitive hourly rate of 16.75 Temp to perm opportunity after 12 weeks Ongoing work with a reputable automotive client Friendly, supportive team environment Lifestyle vouchers and discounts (subject to qualifying criteria) How to Apply Apply now - we want to hear from you. Call: Chelsea Mitchell or Shannon Smith on (phone number removed) (option 2) - GI Group Humber Text: 'DRIVER' to (phone number removed) Email: Send your CV to humber. Please note: Due to client requirements, previous experience as a Strip/Fitter is essential. Should you require any support or assistance, please contact your local Gi Group office. Gi Group Holdings Recruitment Limited are proud founding members of Menopause in business, corperate members for Neurodiversity in business, Disability Confident committed members, Gold status for the Armed Forces Covenant, Bronze trail blazers for Racial Equality matters and Age Freindly Employer pledge members. Gi Group Holdings Recruitment Limited group of companies includes Gi Recruitment Limited, Draefern Limited, Gi Group Recruitment Ltd, INTOO (UK) Limited, Marks Sattin (UK) Limited, TACK TMI UK Limited, Grafton Professional Staffing Limited, Encore Personnel Services, Gi Group Ireland Limited and Kelly Services (UK) Ltd. Gi Group Ireland Limited are acting as an Employment Agency in relation to this role. We are committed to protecting the privacy of all our candidates and clients. If you choose to apply, your information will be processed in accordance with the Gi Group Privacy Statement. To view a copy and to help you understand how we collect, use and process your personal data please visit the Privacy page on our Gi Group website.
Jun 11, 2026
Seasonal
Vehicle Strip/Fitter Location: Grimsby (DN31) Pay: 16.75 per hour Shifts: 4 on 4 off Hours: 06:00-18:00 Contract: Temp to Perm after 12 weeks (subject to performance and attendance) GI Group Humber are recruiting an experienced Vehicle Strip/Fitter for our automotive client based in Grimsby (DN31) . This is an excellent opportunity for a bodyshop professional looking for stable work and a long-term role. Pay & Hours 16.75 per hour 4 on 4 off shift pattern 06:00-18:00 Temp to perm after 12 weeks (performance/attendance dependent) Key Responsibilities Duties will include (but are not limited to): Stripping and refitting vehicles, including removing/replacing panels, bumpers, lights, door handles and interior trim Handling minor mechanical, electrical and trim components during strip/refit Ensuring excellent component care by labelling, organising and storing parts correctly for efficient reassembly Working to set processes and quality standards, ensuring health & safety is followed at all times Requirements To be considered, you must have: Full UK Driving Licence held for at least 2 years Aged 22+ No points/endorsements (up to 3 points may be accepted depending on code) Proven experience as a Vehicle Strip/Fitter (or similar bodyshop role) - essential (client requirement) Good attention to detail and ability to follow procedures Reliable and able to work the 4 on 4 off shift rotation Benefits Competitive hourly rate of 16.75 Temp to perm opportunity after 12 weeks Ongoing work with a reputable automotive client Friendly, supportive team environment Lifestyle vouchers and discounts (subject to qualifying criteria) How to Apply Apply now - we want to hear from you. Call: Chelsea Mitchell or Shannon Smith on (phone number removed) (option 2) - GI Group Humber Text: 'DRIVER' to (phone number removed) Email: Send your CV to humber. Please note: Due to client requirements, previous experience as a Strip/Fitter is essential. Should you require any support or assistance, please contact your local Gi Group office. Gi Group Holdings Recruitment Limited are proud founding members of Menopause in business, corperate members for Neurodiversity in business, Disability Confident committed members, Gold status for the Armed Forces Covenant, Bronze trail blazers for Racial Equality matters and Age Freindly Employer pledge members. Gi Group Holdings Recruitment Limited group of companies includes Gi Recruitment Limited, Draefern Limited, Gi Group Recruitment Ltd, INTOO (UK) Limited, Marks Sattin (UK) Limited, TACK TMI UK Limited, Grafton Professional Staffing Limited, Encore Personnel Services, Gi Group Ireland Limited and Kelly Services (UK) Ltd. Gi Group Ireland Limited are acting as an Employment Agency in relation to this role. We are committed to protecting the privacy of all our candidates and clients. If you choose to apply, your information will be processed in accordance with the Gi Group Privacy Statement. To view a copy and to help you understand how we collect, use and process your personal data please visit the Privacy page on our Gi Group website.
Electrical Fitter Location: Peterborough Salary: circa. 36,000 DoE + bonus scheme! 39 hour working week + Lots Overtime Available The Company We're partnering with a leading UK manufacturer of specialist electric industrial vehicles, supplying innovative transport solutions to customers across manufacturing, logistics, healthcare, airports, hospitality and many other sectors. Due to continued growth, they're looking to add an Electrical Fitter to their production team based just outside Peterborough. The Role This is a hands-on position within a busy production environment, building, testing, maintaining and repairing a wide range of electric industrial vehicles and bespoke transport solutions. Working as part of the factory team, you'll be involved in both new vehicle production and fleet preparation, ensuring all vehicles meet the highest standards of quality and reliability. Key Responsibilities Electrical installation and wiring of 12V and 48V vehicle systems Electrical fault finding, diagnostics and repair work Mechanical assembly and fitting of vehicle components Building, testing and preparing vehicles for customer delivery Maintaining high quality, safety and housekeeping standards About You We're keen to speak with candidates from backgrounds such as: Automotive Auto Electrical Vehicle Assembly Plant Machinery Agricultural Equipment Manufacturing You'll Ideally Have Previous experience in a mechanical or electrical engineering role Experience working with 12V and 48V electrical systems Electrical fault-finding and diagnostic skills A practical, hands-on approach with a willingness to learn Welding experience would be advantageous but not essential What's On Offer? Competitive salary with realistic OTE of 36,000 - 48,000 Company profit share bonus scheme Overtime opportunities available Ongoing manufacturer and in-house training Career progression opportunities 29 days holiday including bank holidays Interested? If you're an Electrical Fitter, Auto Electrician, Vehicle Technician or Assembly Technician looking for a varied hands-on role with a growing UK manufacturer, we'd love to hear from you. Apply today
Jun 11, 2026
Full time
Electrical Fitter Location: Peterborough Salary: circa. 36,000 DoE + bonus scheme! 39 hour working week + Lots Overtime Available The Company We're partnering with a leading UK manufacturer of specialist electric industrial vehicles, supplying innovative transport solutions to customers across manufacturing, logistics, healthcare, airports, hospitality and many other sectors. Due to continued growth, they're looking to add an Electrical Fitter to their production team based just outside Peterborough. The Role This is a hands-on position within a busy production environment, building, testing, maintaining and repairing a wide range of electric industrial vehicles and bespoke transport solutions. Working as part of the factory team, you'll be involved in both new vehicle production and fleet preparation, ensuring all vehicles meet the highest standards of quality and reliability. Key Responsibilities Electrical installation and wiring of 12V and 48V vehicle systems Electrical fault finding, diagnostics and repair work Mechanical assembly and fitting of vehicle components Building, testing and preparing vehicles for customer delivery Maintaining high quality, safety and housekeeping standards About You We're keen to speak with candidates from backgrounds such as: Automotive Auto Electrical Vehicle Assembly Plant Machinery Agricultural Equipment Manufacturing You'll Ideally Have Previous experience in a mechanical or electrical engineering role Experience working with 12V and 48V electrical systems Electrical fault-finding and diagnostic skills A practical, hands-on approach with a willingness to learn Welding experience would be advantageous but not essential What's On Offer? Competitive salary with realistic OTE of 36,000 - 48,000 Company profit share bonus scheme Overtime opportunities available Ongoing manufacturer and in-house training Career progression opportunities 29 days holiday including bank holidays Interested? If you're an Electrical Fitter, Auto Electrician, Vehicle Technician or Assembly Technician looking for a varied hands-on role with a growing UK manufacturer, we'd love to hear from you. Apply today
MOBILE FITTER NEEDED IN TELFORD, SHROPSHIRE Due to an increase in orders, we are looking for an additional Mobile Fitter to join a well established vehicle conversion manufacturing business in Telford, Shropshire. This role will involve you being out on the road installing after market products to vehicles across the country to an excellent standard while providing and excellent customer service, it is ESSENTIAL that you hold a Full UK Driving License . The working hours are day shifts Monday to Friday (45 hours per week), the starting hourly pay rate is between £13.50 - £14.00 per hour (annual salary around £30K), with future development and progression opportunities available, as well as overtime also being available and paid at premium rate once you've passed a probation period, overnight stays may be required from time to time This role would be a great fit for someone who has previous experience as a Service Engineer, Field Service Engineer, Mobile Mechanic, Assembly Fitter, Mobile Fitter, Mechanical Assembler, Mechanical Fitter, Electrical Fitter, Vehicle Fitter or Vehicle Technician who has a passion for working with vehicles and is happy working on the road. Whilst the starting rate is typically £13.00 per hour, should you have any experience in installing the following parts, then the starting rate of pay could increase: Security Locks Inverter Systems Hard Tops for 4 x 4 Ply Lining Kits Racking Systems Vents Hand Wash Units Tow Bars Beacons Lighting Fall & Arrest Bars Reverse Cameras Roof Bars What You Will Do: Measure, cut, and install components into vehicles with precision. Work confidently from technical drawings to ensure accuracy. Use a variety of hand and power tools daily, including spanners and drills. Adhere to all health and safety regulations to maintain a safe workspace. Complete supporting paperwork efficiently and accurately. Collaborate with the team to meet production deadlines and quality standards. What You Will Bring: Full UK Driving License Proven experience within a manufacturing or assembly environment. Proficiency in using hand and power tools. Ability to read and understand technical drawings. A proactive attitude and a keen eye for detail. A passion for working with vehicles or a willingness to learn in this area. This role plays a vital part in delivering high-quality products that align with the company's commitment to excellence. The Mobile Fitter will contribute to the organisation's goals by ensuring precision and efficiency in the assembly process, helping to maintain their strong reputation within the manufacturing industry. Location: The position is based in Telford, Shropshire. Interested?: Don't miss out on this fantastic opportunity to develop your career as a Mobile Fitter. Apply today to join a forward-thinking company that values your skills and offers long-term career prospects. Demand for this role is high, so act quickly to secure your chance to shine! Your CV will be forwarded to Jonathan Lee Recruitment, a leading engineering and manufacturing recruitment consultancy established in 1978. The services advertised by Jonathan Lee Recruitment are those of an Employment Agency. In order for your CV to be processed effectively, please ensure your name, email address, phone number and location (post code OR town OR county, as a minimum) are included.
Jun 11, 2026
Contractor
MOBILE FITTER NEEDED IN TELFORD, SHROPSHIRE Due to an increase in orders, we are looking for an additional Mobile Fitter to join a well established vehicle conversion manufacturing business in Telford, Shropshire. This role will involve you being out on the road installing after market products to vehicles across the country to an excellent standard while providing and excellent customer service, it is ESSENTIAL that you hold a Full UK Driving License . The working hours are day shifts Monday to Friday (45 hours per week), the starting hourly pay rate is between £13.50 - £14.00 per hour (annual salary around £30K), with future development and progression opportunities available, as well as overtime also being available and paid at premium rate once you've passed a probation period, overnight stays may be required from time to time This role would be a great fit for someone who has previous experience as a Service Engineer, Field Service Engineer, Mobile Mechanic, Assembly Fitter, Mobile Fitter, Mechanical Assembler, Mechanical Fitter, Electrical Fitter, Vehicle Fitter or Vehicle Technician who has a passion for working with vehicles and is happy working on the road. Whilst the starting rate is typically £13.00 per hour, should you have any experience in installing the following parts, then the starting rate of pay could increase: Security Locks Inverter Systems Hard Tops for 4 x 4 Ply Lining Kits Racking Systems Vents Hand Wash Units Tow Bars Beacons Lighting Fall & Arrest Bars Reverse Cameras Roof Bars What You Will Do: Measure, cut, and install components into vehicles with precision. Work confidently from technical drawings to ensure accuracy. Use a variety of hand and power tools daily, including spanners and drills. Adhere to all health and safety regulations to maintain a safe workspace. Complete supporting paperwork efficiently and accurately. Collaborate with the team to meet production deadlines and quality standards. What You Will Bring: Full UK Driving License Proven experience within a manufacturing or assembly environment. Proficiency in using hand and power tools. Ability to read and understand technical drawings. A proactive attitude and a keen eye for detail. A passion for working with vehicles or a willingness to learn in this area. This role plays a vital part in delivering high-quality products that align with the company's commitment to excellence. The Mobile Fitter will contribute to the organisation's goals by ensuring precision and efficiency in the assembly process, helping to maintain their strong reputation within the manufacturing industry. Location: The position is based in Telford, Shropshire. Interested?: Don't miss out on this fantastic opportunity to develop your career as a Mobile Fitter. Apply today to join a forward-thinking company that values your skills and offers long-term career prospects. Demand for this role is high, so act quickly to secure your chance to shine! Your CV will be forwarded to Jonathan Lee Recruitment, a leading engineering and manufacturing recruitment consultancy established in 1978. The services advertised by Jonathan Lee Recruitment are those of an Employment Agency. In order for your CV to be processed effectively, please ensure your name, email address, phone number and location (post code OR town OR county, as a minimum) are included.
2 x MECHANICAL ASSEMBLERS REQUIRED IN TELFORD (SHROPSHIRE) Are you a Mechanically biased Assembly Operative who is seeking a new job in Telford, and do you have a Full UK Driving License?! We are seeking a Mechanical Assembler to join a leading manufacturer in the Halesfield area of Telford, the starting pay rate is up to £13.50 per hour (DOE) and the working hours are 7am-5pm Mon-Thurs, with a 3pm finish on a Friday (45 hours per week). Overtime is also available and is paid at T1/2 once you've passed a probation period. The hiring manager would like someone who has some experience within carpentry or joinery, or someone who has previous woodworking / band saw / nail gun experience and may have operated a CNC Wood Routing machine, or similar. Anyone who has worked with vehicles, camper vans or commercial vehicles previously would be a great fit for this job, alternatively, anyone who has previously worked as a Panel Maker, Joiner, Carpenter, Mechanical Assembler, Mechanical Fitter, Electrical Fitter, Vehicle Fitter or Vehicle Technician would also be well received. A Full UK Driving License is an ESSENTIAL REQUIREMENT. What You Will Do: Measure, cut, and install components into vehicles with precision and care. Work from and interpret technical drawings to ensure accurate assembly. Use hand and power tools daily, including spanners and drills. Adhere to all health and safety regulations, ensuring a safe working environment. Complete supporting paperwork to maintain accurate records. Collaborate with a team to meet production targets and deliver high-quality results. What You Will Bring: A Full UK Driving License - Essential Proven experience within a manufacturing or assembly environment. Skilled in using hand and power tools effectively and safely. Ability to read and understand technical drawings. A proactive and detail-oriented approach to work. A passion for working with vehicles or a willingness to learn and develop in this area. This Mechanical Assembler role plays a vital part in supporting the company's mission to deliver high-quality products and services. By joining this team, you'll be contributing to a business that values dedication, skill, and innovation, while being part of a supportive and dynamic workplace. Location: This role is based in the Halesfield area of Telford (Shropshire). Interested?: If you're ready to step into a rewarding role as a Mechanical Assembler, don't wait! Apply today to take the first step towards an exciting new chapter in your career. Opportunities like this don't come around often, so make sure you don't miss out! Your CV will be forwarded to Jonathan Lee Recruitment, a leading engineering and manufacturing recruitment consultancy established in 1978. The services advertised by Jonathan Lee Recruitment are those of an Employment Agency. In order for your CV to be processed effectively, please ensure your name, email address, phone number and location (post code OR town OR county, as a minimum) are included.
Jun 11, 2026
Contractor
2 x MECHANICAL ASSEMBLERS REQUIRED IN TELFORD (SHROPSHIRE) Are you a Mechanically biased Assembly Operative who is seeking a new job in Telford, and do you have a Full UK Driving License?! We are seeking a Mechanical Assembler to join a leading manufacturer in the Halesfield area of Telford, the starting pay rate is up to £13.50 per hour (DOE) and the working hours are 7am-5pm Mon-Thurs, with a 3pm finish on a Friday (45 hours per week). Overtime is also available and is paid at T1/2 once you've passed a probation period. The hiring manager would like someone who has some experience within carpentry or joinery, or someone who has previous woodworking / band saw / nail gun experience and may have operated a CNC Wood Routing machine, or similar. Anyone who has worked with vehicles, camper vans or commercial vehicles previously would be a great fit for this job, alternatively, anyone who has previously worked as a Panel Maker, Joiner, Carpenter, Mechanical Assembler, Mechanical Fitter, Electrical Fitter, Vehicle Fitter or Vehicle Technician would also be well received. A Full UK Driving License is an ESSENTIAL REQUIREMENT. What You Will Do: Measure, cut, and install components into vehicles with precision and care. Work from and interpret technical drawings to ensure accurate assembly. Use hand and power tools daily, including spanners and drills. Adhere to all health and safety regulations, ensuring a safe working environment. Complete supporting paperwork to maintain accurate records. Collaborate with a team to meet production targets and deliver high-quality results. What You Will Bring: A Full UK Driving License - Essential Proven experience within a manufacturing or assembly environment. Skilled in using hand and power tools effectively and safely. Ability to read and understand technical drawings. A proactive and detail-oriented approach to work. A passion for working with vehicles or a willingness to learn and develop in this area. This Mechanical Assembler role plays a vital part in supporting the company's mission to deliver high-quality products and services. By joining this team, you'll be contributing to a business that values dedication, skill, and innovation, while being part of a supportive and dynamic workplace. Location: This role is based in the Halesfield area of Telford (Shropshire). Interested?: If you're ready to step into a rewarding role as a Mechanical Assembler, don't wait! Apply today to take the first step towards an exciting new chapter in your career. Opportunities like this don't come around often, so make sure you don't miss out! Your CV will be forwarded to Jonathan Lee Recruitment, a leading engineering and manufacturing recruitment consultancy established in 1978. The services advertised by Jonathan Lee Recruitment are those of an Employment Agency. In order for your CV to be processed effectively, please ensure your name, email address, phone number and location (post code OR town OR county, as a minimum) are included.
Astute's Power Team are currently recruiting for a Mechanical Fitters mate to join the EPC Contractor on the new build OCGT plant based in Lincolnshire on a 4 months contract. The Mechanical Fitters mate position comes with a flat hourly rate from 18.00 to 20.00 CIS. Role responsibilities and key skills for the role: Assist Mechanical Fitters and Platers with the completion of mechanical and structural punch list items, ensuring works are carried out safely and efficiently. Prepare tools, equipment, materials and work areas to support mechanical installation, maintenance and repair activities. Support the assembly, installation and removal of mechanical components, steelwork, supports and associated plant equipment under supervision. Carry out general labouring duties, housekeeping and site cleanliness activities to maintain a safe and organised working environment. Assist with the movement, positioning and handling of materials, equipment and components in accordance with site procedures and lifting plans. Work collaboratively with mechanical and construction teams to support outage, maintenance and new-build project activities while adhering to all site HSE requirements. Location, day rate and timeframe of the Mechanical Fitters mate position: Lincolnshire. 18.00 to 20.00 per hour CIS Immediate start date 4 months INDPOW Astute People are acting as an employment business in relation to this vacancy. We do not discriminate on the grounds of age, race, gender, disability, creed or sexual orientation and comply with all relevant UK legislation. We encourage applications from individuals from all backgrounds but candidates must be able to demonstrate their ability to work in the UK. Astute is also committed to the government's Disability Confident Employer initiative. We endeavour to get back to everyone, however, if you have not heard anything after 7 days, please consider your application unsuccessful.
Jun 11, 2026
Contractor
Astute's Power Team are currently recruiting for a Mechanical Fitters mate to join the EPC Contractor on the new build OCGT plant based in Lincolnshire on a 4 months contract. The Mechanical Fitters mate position comes with a flat hourly rate from 18.00 to 20.00 CIS. Role responsibilities and key skills for the role: Assist Mechanical Fitters and Platers with the completion of mechanical and structural punch list items, ensuring works are carried out safely and efficiently. Prepare tools, equipment, materials and work areas to support mechanical installation, maintenance and repair activities. Support the assembly, installation and removal of mechanical components, steelwork, supports and associated plant equipment under supervision. Carry out general labouring duties, housekeeping and site cleanliness activities to maintain a safe and organised working environment. Assist with the movement, positioning and handling of materials, equipment and components in accordance with site procedures and lifting plans. Work collaboratively with mechanical and construction teams to support outage, maintenance and new-build project activities while adhering to all site HSE requirements. Location, day rate and timeframe of the Mechanical Fitters mate position: Lincolnshire. 18.00 to 20.00 per hour CIS Immediate start date 4 months INDPOW Astute People are acting as an employment business in relation to this vacancy. We do not discriminate on the grounds of age, race, gender, disability, creed or sexual orientation and comply with all relevant UK legislation. We encourage applications from individuals from all backgrounds but candidates must be able to demonstrate their ability to work in the UK. Astute is also committed to the government's Disability Confident Employer initiative. We endeavour to get back to everyone, however, if you have not heard anything after 7 days, please consider your application unsuccessful.
