14 jobs found

Production Test Engineer 12-month contract Based in Stevenage Offering 36ph Inside IR35 Are you an experienced Electronics Test Engineer? Do you have experience testing down to component level? Do you want to work with an industry-leading company? If your answer to these is yes, then this could be the role for you! As the Production Test Engineer, you will be working alongside a market-leading Defence and Aerospace company who are constantly growing and developing. They are always looking to bring on new talents such as yourself and further develop your skills to enable you to grow within the company and industry. You will be involved in: Providing test engineering support to operators on the shopfloor Testing and diagnosing complex electrical/electronic systems, sub-assemblies, and circuit cards down to component level Generating test specifications, operator instructions, and technical reports - based on higher-level requirements and information Identify remedial and corrective actions Supporting meetings with Quality and Operations to provide status updates on Test Engineering actions and investigations Your skillset may include: A good understanding of measurement and test principles, and associated equipment down to component level Awareness of electrical/electronic sub-system and system design, integration, and test principles. An understanding of RF and microwave technology at subsystem level An understanding of Environmental testing (including ESS) Manual handling training ESD training If this all sounds like something you will be interested in then simply apply and we can discuss the opportunity further! Production Test Engineer 12-month contract Based in Stevenage Offering 36ph Inside IR35 Disclaimer: This vacancy is being advertised by either Advanced Resource Managers Limited, Advanced Resource Managers IT Limited or Advanced Resource Managers Engineering Limited ("ARM"). ARM is a specialist talent acquisition and management consultancy. We provide technical contingency recruitment and a portfolio of more complex resource solutions. Our specialist recruitment divisions cover the entire technical arena, including some of the most economically and strategically important industries in the UK and the world today. We will never send your CV without your permission. Where the role is marked as Outside IR35 in the advertisement this is subject to receipt of a final Status Determination Statement from the end Client and may be subject to change.

Our client has an opportunity for a Production Test Engineer to join their team on a contract basis for 12 months. You will play a vital role in supporting testing and diagnostics of electrical/electronic sub-systems and circuit cards during the production phase of the product lifecycle. You will use your experience to provide technical support to the manufacturing test capability, to ensure programme targets are met to agreed time, cost and quality requirements. Role : Production Test Engineer - Live Build Location : Stevenage - fully onsite Hours : 37 per week Hourly Rate : 32- 36 per hour via Umbrella, inside IR35 Clearance : SC required before starting, UK Eyes Only due to project What you'll be doing: You will be working with a small team of dedicated engineers in a fast-paced but friendly and inclusive manufacturing environment, carrying out the following: Providing test engineering support to operators on the shopfloor, including supporting the introduction of new test equipment. Testing and diagnosing complex electrical/electronic systems, sub-assemblies and circuit cards down to component level. Generating test specifications, operator instructions and technical reports - based on higher-level requirements and information. Promptly identifying remedial and corrective actions to allow Manufacturing to continue in line with the programme, following production test failures. Supporting meetings with Quality and Operations to provide status updates on Test Engineering actions and investigations. Requirements : Essential: Minimum HNC level of Engineering qualifications or equivalent. Good understanding of digital and analogue electronic measurement and test principles, and fault diagnosis techniques, with demonstrable experience down to component level. Awareness of electrical/electronic sub-system and system design, integration and test principles. Good verbal and written communication skills, including generation of test specifications, operator instructions and technical reports. Ability to plan and organise one's work according to assigned priorities. Advantageous: Knowledge of RF and Microwave technology at the subsystem level. Experience in operating manual and automated test equipment in an Electronics Manufacturing environment. If you are interested in applying for this position and you meet the requirements, please apply immediately! Line Up Aviation is a specialist aviation and aerospace recruitment company that has been operating all over the world for more than 30 years. We work with some of the industry's best-known companies and pride ourselves with working to the highest standard of service supported by an ingrained culture of honesty and integrity. " on Twitter for all our latest vacancies, news and pictures from our busy UK Head Office. Interact with us using the tag at any time! Thank you for your follow!"

ERP Systems Engineer (Epicor / Manufacturing) We re looking for someone to take ownership of our ERP system (Epicor) and continuously improve how it supports our manufacturing operations. This role is focused on making the ERP system work better for the business improving processes, data quality, and visibility across production, planning, and operations. What you ll do Own and develop the Epicor ERP system (configuration, data, processes, improvements) Work with production, planning, and finance to identify inefficiencies and fix them Build and maintain SQL queries, BAQs, and datasets to support business needs Improve data quality, structure, and consistency across the ERP system Develop integrations between Epicor and other systems (APIs, connectors) Create dashboards (Power BI) and reports that drive operational decisions Deliver automation using Power Platform (Power Apps / Power Automate) where it adds value Support continuous improvement initiatives across the factory (WIP flow, bottlenecks, planning) What we re looking for Experience working with an ERP system in a manufacturing environment (Epicor ideally but not essential) Strong SQL and data understanding Ability to understand business processes and improve them through systems Comfortable working directly with users across the business (shopfloor to management) Practical, problem-solving mindset not just technical delivery Nice to have Experience with Epicor Kinetic Crystal/SSRS/BoldReports Reporting Power BI / Fabric / data modelling Power Platform (Apps / Automate) API / integration experience Exposure to manufacturing data (WIP, MRP, MES, IoT) Why this role matters You will be responsible for improving how our ERP system supports the business helping us reduce bottlenecks, improve planning, and make better decisions using accurate data.

Manufacturing Engineer Location: Luton Contract: 12 Month Contract Rate: £40 per hour (Inside IR35) Security Clearance: Active SC Clearance Required Working Pattern: 4-5 Days On Site THE ROLE We are recruiting on behalf of a leading defence engineering organisation looking to appoint an experienced Manufacturing Engineer to support their Manufacturing Engineering Team within Manufacturing Operations. This role will focus on supporting the transition of new products from design into manufacture, ensuring efficient, cost-effective and high-quality production readiness across complex engineering programmes. This is an excellent opportunity to work within a highly advanced defence environment supporting NPI, process improvement and shopfloor manufacturing engineering activities on technically complex products. KEY RESPONSIBILITIES - Develop and improve manufacturing processes by analysing product requirements and defining manufacturing methods - Provide Design for Excellence (DfX) input including Design for Manufacture, Assembly and Test activities - Support New Product Introduction (NPI) activities from prototype through to production - Collaborate with operators, suppliers and equipment vendors to optimise manufacturing solutions - Support Manufacturing Maturity Reviews and lifecycle governance activities - Develop and maintain manufacturing plans and process documentation - Provide manufacturing data to support production planning, labour analysis and forecasting activities - Produce process reports and analyse manufacturing trends and performance data - Develop work instructions and support manufacturing training activities - Resolve shopfloor production issues, bottlenecks and escalations to minimise operational disruption - Drive continuous improvement initiatives including capacity analysis, workflow optimisation and process improvement projects - Support layout optimisation and manufacturing efficiency improvements WHAT WE'RE LOOKING FOR - Proven experience within a Manufacturing Engineer role - Background within defence, aerospace or high-reliability engineering environments - Strong understanding of manufacturing engineering principles and production processes - Experience supporting NPI and product transition into manufacture - Good understanding of DfX principles including manufacture, assembly and test - Strong analytical and problem-solving capability - Comfortable operating within fast-paced shopfloor manufacturing environments - Excellent communication and stakeholder management skills - Active SC Clearance essential - Sole British National required DESIRABLE EXPERIENCE - Manufacturing readiness reviews - Continuous improvement and lean manufacturing - Capacity analysis and workflow simulation - Production planning and process optimisation - High-complexity electromechanical or defence products WHY APPLY? This is an opportunity to work within a highly advanced defence manufacturing environment supporting critical engineering programmes and complex manufacturing operations. You'll be joining a business at the forefront of defence technology, working alongside experienced engineering and manufacturing teams on long-term, technically challenging projects. INDWIN Our clients and their customers come from diverse backgrounds and so do we. We hire our people from various walks of life, each of whom make our company stronger with their talent, uniqueness, and expertise. This is what makes our company special; if you want to help us grow and take this ethos to our clients, then we cannot wait to collaborate with you! The UK has now left the European Union. Any EU, EEA or Swiss citizens living in the UK that wish to remain in the UK post Brexit need to apply to the EU Settlement Scheme. Although the closing date for applications was 30th Jun 2021, if you have not yet applied but believe that you would qualify under the EU Settlement Scheme, the Home Office have confirmed that they will consider late applications. For further information please see (url removed)> Many Thanks

Our client has an opportunity for a Technical Shopfloor Engineer to join them on a 12 month contract. You will be accompanying the production team in identifying and analysing technical issues. Role : Technical Shopfloor Engineer Location : Broughton, Flintshire Hours : Alternating weeks of mornings and afternoons: Monday to Friday Mornings - 6:00am - 1:10pm / Afternoons - 1:30pm - 8:40pm Clearance : BPSS required to start Hourly Rate : 40.13 per hour via Umbrella, inside IR35 + a 20% shift uplift What you'll be doing: Accompany the production team / Autonomous Production Team (APT). Supports in identifying, analysing and solving technical issues not directly manageable by the Operators & First Line Manager (FLM). Provides an E2E perspective at the shopfloor level within the production team / APT in Airbus. Supports continuous production enablement by efficiently utilising available resources & knowledge Contributes to the Operational Excellence targets within her/his area by adhering to the continuous improvement of operational processes. Support in identifying Non-Conformance on the shopfloor. Requirements: Technical lineside/shopfloor experience Either an NVQ Level 4 OR vast experience in lineside within automation Manufacturing engineering experience required Experience working to regulatory requirements and constraints. Project management Communication skills Autonomy, adaptability, and proactivity Ensure Customer Focus Ensure Product Safety Support Nonconformity reduction activity Line Up Aviation is a specialist aviation and aerospace recruitment company that has been operating all over the world for more than 30 years. We work with some of the industry's best-known companies and pride ourselves with working to the highest standard of service supported by an ingrained culture of honesty and integrity. " on Twitter for all of our latest vacancies, news and pictures from our busy UK Head Office. Interact with us using the tag at anytime! Thank you for your follow!"

Quality Manager Nottingham (East) 60-70K plus Bonus plus Benefits Mon-Fri, 36.5 hours/week, 25 days leave Are you skilled and experienced manufacturing Quality Manager from an mechanical engineering/materials/metallurgy background, looking a prestigious lead quality position on a large manufacturing site? The company can offer job security and an interesting, challenging position with clear potential to progress further in the business. This position is the lead quality role on site with 2 direct reports and 20 staff indirectly reporting into it. The roles purpose involves both strategic and line management, and will be working to both ISO9001 and IATF 16949 quality standards. The site covers both manufacturing and a small amount laboratory staff. It will suit an experienced Quality Manager with a strong engineering background who ideally understands both automotive and general manufacturing quality standards. The Role Full time, permanent onsite position for a global manufacturing company Line manage a team of 20 staff (2 direct reports) Ensure products made meet all quality and compliance standards. Dealing with customer and supplier issues The Person Academic and working background in engineering, including materials/mechanical engineering/metallurgy Working experience in a Quality Manager role , including managing a team Ideally knowledge of both automotive and general manufacturing quality standards Experience of managing both shopfloor and laboratory based staff Reference Number: BBBH(phone number removed) To apply for this role or to be considered for further roles, please click "Apply Now" or contact Nick Smith at Rise Technical Recruitment. Rise Technical Recruitment Ltd acts an employment agency for permanent roles and an employment business for temporary roles. The salary advertised is the bracket available for this position. The actual salary paid will be dependent on your level of experience, qualifications and skill set and will be decided by our client, the employer. Rise are not responsible or liable for any hiring decisions made by the end client. We are an equal opportunities company and welcome applications from all suitable candidates.

Role Information Quality Assurance Engineer Salary up to 32,000 DOE Merthyr Tydfil South Wales Onsite role Starting October 2026 Why join Marshall Land Systems in this role: The Quality Assurance Engineer is responsible for ensuring that products and processes meet defined quality standards and customer requirements across the production lifecycle. Working closely with Production, Engineering, and Operations teams, the role drives quality compliance, supports continuous improvement, and ensures robust quality systems are implemented and maintained to support safe, efficient, and right-first-time delivery. Your responsibilities in this role include: Ensure compliance with all quality standards, procedures, and regulatory requirements across production operations Support the development, implementation, and continuous improvement of the Quality Management System (QMS) Conduct internal audits and support external audits, ensuring readiness and compliance at all times Investigate non-conformances, identify root causes, and implement corrective and preventive actions (CAPA) Work closely with Production teams to ensure adherence to quality processes and standards on the shopfloor Collaborate with Engineering to ensure effective transition of designs into production, with quality built into processes Support inspection and testing activities, ensuring products meet required specifications and customer expectations Analyse quality data and trends to identify areas for improvement and support decision Drive continuous improvement initiatives to reduce defects, rework, and waste Ensure all quality documentation is accurate, controlled, and up to date Support supplier quality activities where required, including evaluation and performance monitoring Promote a strong quality culture across the site, ensuring accountability and awareness at all levels Apply if you have most of the following; Strong understanding of quality assurance principles and quality management systems (e.g. ISO 9001) Understanding of engineering drawings, specifications, and technical documentation Working knowledge of Health & Safety and regulatory compliance requirements Technical skills/qualifications: Strong understanding of quality assurance principles and quality management systems (e.g. ISO 9001) Experience with root cause analysis tools (e.g. 8D, 5 Whys, Fishbone/Ishikawa) Knowledge of inspection and testing methods within a manufacturing environment Ability to analyse and interpret quality and production data Familiarity with continuous improvement methodologies (e.g. Lean, Six Sigma) Understanding of engineering drawings, specifications, and technical documentation Working knowledge of Health & Safety and regulatory compliance requirements Additional local needs: Onsite role Successful candidate will need to complete BPSS checks The benefits for this role are: Opportunity to develop into senior Quality Engineering or Quality Management roles Exposure to cross-functional operations, including Production, Engineering, and Supply Chain Involvement in continuous improvement and operational excellence initiatives Potential progression into broader operational or technical leadership role Marshall Land Systems is a Canadian-owned global company with an unrivalled pedigree of British engineering excellence. From its origins in Cambridge, UK, through more than a century of innovation, pioneering advances from the nose of Concorde to the early Hydrogen fuel cell technology that ultimately powered the moon landings, Marshall engineers now continue to innovate specialist vehicles and infrastructure for NATO forces across the world. From bomb disposal vehicles to deployed shelters, from command and control to CT scanners on the battlefield, Marshall Land Systems protects people in critical situations with the very best in engineering. It employs 600 people with major facilities the UK, Canada, and the Netherlands.

Production Test Engineer 12-month contract Based in Bolton Offering 37ph Inside IR35 Are you an experienced Test Engineer? Do you have experience testing down to component level? Do you want to work with an industry-leading company? If your answer to these is yes, then this could be the role for you! As the Production Test Engineer, you will be working alongside a market-leading Defence and Aerospace company who are constantly growing and developing. They are always looking to bring on new talents such as yourself and further develop your skills to enable you to grow within the company and industry. You will be involved in: Providing test engineering support to operators on the shopfloor Testing and diagnosing complex electrical/electronic systems, sub-assemblies, and circuit cards down to component level Generating test specifications, operator instructions, and technical reports - based on higher-level requirements and information Identify remedial and corrective actions Supporting meetings with Quality and Operations to provide status updates on Test Engineering actions and investigations Your skillset may include: A good understanding of measurement and test principles, and associated equipment down to component level Awareness of electrical/electronic sub-system and system design, integration, and test principles. An understanding of RF and microwave technology at subsystem level An understanding of Environmental testing (including ESS) Manual handling training ESD training If this all sounds like something you will be interested in then simply apply and we can discuss the opportunity further! Production Test Engineer 12-month contract Based in Bolton Offering 37ph Inside IR35 Disclaimer: This vacancy is being advertised by either Advanced Resource Managers Limited, Advanced Resource Managers IT Limited or Advanced Resource Managers Engineering Limited ("ARM"). ARM is a specialist talent acquisition and management consultancy. We provide technical contingency recruitment and a portfolio of more complex resource solutions. Our specialist recruitment divisions cover the entire technical arena, including some of the most economically and strategically important industries in the UK and the world today. We will never send your CV without your permission. Where the role is marked as Outside IR35 in the advertisement this is subject to receipt of a final Status Determination Statement from the end Client and may be subject to change.

Role: CAD Designer Type: Permanent, Full-time Pay: Up to £35,000 Hours: Monday to Friday 8:30 - 17:00 Location: Stourbridge - West Midlands Are you a CAD Designer looking for your next opportunity? I'm currently representing an Engineering Manufacturer company based in Stourbridge and they're looking for a CAD Designer to join them on a permanent basis due to growth in the business. CAD DesignerJob Description Responsible for creating technical drawings and detailed CAD designs. Optional tasks include operating a press brake and wire eroder for test samples. Work closely with the shopfloor on tooling designs for press brakes. Focus on producing precise and innovative manufacturing solutions. CAD Designer Essential Experience/Skills/Qualifications Strong technical drawing ability Proficient in SolidWorks Good understanding of design engineering principles High attention to detail and accuracy Able to perform well in a fast-moving environment Excellent communication and teamworking skills If you feel you're a good fit for this position, please click 'apply'.

Job Description Production Engineer - Rail Key Responsibilities: • Perform maintenance and repair tasks on series 1600 and 4000 applications in accordance with the working manual, with opportunities to support other business units in the field as required. • Assist in the assembly and preparation of 199 and 2000 applications, as required. • Demonstrate relevant technical knowledge to support troubleshooting and diagnostics of different applications. • Conduct engine and component inspections and cleaning as required. • Identify opportunities for cost reduction and efficiency improvements in operations. • Collaborate with the lean team to identify and implement process improvements. • Utilize special tools and measuring equipment as necessary. • Complete relevant process documentation as required. • Comply with all health and safety regulations. • Foster a positive work environment that encourages teamwork and collaboration. • Maintain high standards of cleanliness and housekeeping in all production and shopfloor areas and facilities. • Manoeuvre products and materials using plant machinery in accordance with assigned competencies. • Attend training courses as required to enhance job performance. • Maintain a monthly utilization rate of 85% or higher. • Be responsible for ticket management, ensuring the accurate recording of material and labour hours for job-related tickets assigned to you. Prioritize the completion of these tickets, including C4S tickets, before engine and powerpack applications depart. Ensure all tasks are promptly completed and submitted, adhering to established standards while remaining compliant. • Undertake any other production or facilities-related activities as reasonably required by the Operations Manager, Supervisor, or Team Leader. Personality / Job Skills: • Skilled in maintenance and repairs with a strong technical background. • Proficient in basic troubleshooting and diagnostic methods. • Ability to identify ways to save money and improve efficiency. • Excellent teamwork skills and ability to foster a positive work environment. • Organized, with a keen attention to cleanliness on the shopfloor and the wider facility. • Takes ownership and demonstrates accountability for task completion. • Capable of safely operating machinery. • Responsible, reliable, and dependable in completing tasks on time. • Note: This job is physically demanding. Computer Skills: • Computer literate with proficient keyboard skills and knowledge of both Windows and IOS based systems. • On-the-job training will be provided for SAP C4S, 3C's, MTU Go!Care and MTU Business Portal. Requirements: Language: Must be fluent in both written and spoken English. NVQ Level 3 in Engineering - with Electrical and Mechanical experience literacy and Numeracy: Must be competent in both. Must possess a full, clean driving license and be a UK passport holder Experience driving forklift/tow truck and crane operation is preferable, although training will be provided. Type of Contract PermanentPandoLogic.

Job Description We are seeking a skilled Production Engineer responsible for the assembly of new product and maintenance, repair, and overhaul of customer owned product. The ideal candidate will collaborate on process improvements, prioritize safety, and ensure efficient operations while demonstrating significant mechanical knowledge and an ability to work effectively in a team. Key Responsibilities: Perform maintenance and repair tasks on series 1600 and 4000 applications in accordance with the working manual, with opportunities to support other business units in the field as required. Assist in the assembly and preparation of 199 and 2000 applications, as required. Demonstrate relevant technical knowledge to support troubleshooting and diagnostics of different applications. Conduct engine and component inspections and cleaning as required. Identify opportunities for cost reduction and efficiency improvements in operations. Collaborate with the lean team to identify and implement process improvements. Utilize special tools and measuring equipment as necessary. Complete relevant process documentation as required. Comply with all health and safety regulations. Foster a positive work environment that encourages teamwork and collaboration. Maintain high standards of cleanliness and housekeeping in all production and shopfloor areas and facilities. Manoeuvre products and materials using plant machinery in accordance with assigned competencies. Attend training courses as required to enhance job performance. Maintain a monthly utilization rate of 85% or higher. Be responsible for ticket management, ensuring the accurate recording of material and labour hours for job-related tickets assigned to you. Prioritize the completion of these tickets, including C4S tickets, before engine and powerpack applications depart. Ensure all tasks are promptly completed and submitted, adhering to established standards while remaining compliant. Undertake any other production or facilities-related activities as reasonably required by the Operations Manager, Supervisor, or Team Leader. This list is not exhaustive and may change. Personality / Job Skills: Skilled in maintenance and repairs with a strong technical background. Proficient in basic troubleshooting and diagnostic methods. Ability to identify ways to save money and improve efficiency. Excellent teamwork skills and ability to foster a positive work environment. Organized, with a keen attention to cleanliness on the shopfloor and the wider facility. Takes ownership and demonstrates accountability for task completion. Capable of safely operating machinery. Responsible, reliable, and dependable in completing tasks on time. Note: This job is physically demanding. Computer Skills: Computer literate with proficient keyboard skills and knowledge of both Windows and IOS based systems. On-the-job training will be provided for SAP C4S, 3C's, MTU Go!Care and MTU Business Portal. Requirements: Language: Must be fluent in both written and spoken English. NVQ Level 3 or equivalent Literacy and Numeracy: Must be competent in both. Must possess a full, clean driving license and be a UK passport holder. Experience driving forklift/tow truck and crane operation is preferable, although training will be provided. Type of Contract PermanentPandoLogic.

Production Test Engineer 12-month contract Based in Stevenage Offering £36ph Inside IR35 Are you an experienced Electronics Test Engineer? Do you have experience testing down to component level? Do you want to work with an industry-leading company? If your answer to these is yes, then this could be the role for you! As the Production Test Engineer, you will be working alongside a market-leading Defence and Aerospace company who are constantly growing and developing. They are always looking to bring on new talents such as yourself and further develop your skills to enable you to grow within the company and industry. You will be involved in: Providing test engineering support to operators on the shopfloor Testing and diagnosing complex electrical/electronic systems, sub-assemblies, and circuit cards down to component level Generating test specifications, operator instructions, and technical reports - based on higher-level requirements and information Identify remedial and corrective actions Supporting meetings with Quality and Operations to provide status updates on Test Engineering actions and investigations Your skillset may include: A good understanding of measurement and test principles, and associated equipment down to component level Awareness of electrical/electronic sub-system and system design, integration, and test principles. An understanding of RF and microwave technology at subsystem level An understanding of Environmental testing (including ESS) Manual handling training ESD training If this all sounds like something you will be interested in then simply apply and we can discuss the opportunity further! Production Test Engineer 12-month contract Based in Stevenage Offering £36ph Inside IR35 Disclaimer: This vacancy is being advertised by either Advanced Resource Managers Limited, Advanced Resource Managers IT Limited or Advanced Resource Managers Engineering Limited ("ARM"). ARM is a specialist talent acquisition and management consultancy. We provide technical contingency recruitment and a portfolio of more complex resource solutions. Our specialist recruitment divisions cover the entire technical arena, including some of the most economically and strategically important industries in the UK and the world today. We will never send your CV without your permission. Where the role is marked as Outside IR35 in the advertisement this is subject to receipt of a final Status Determination Statement from the end Client and may be subject to change.

Mildenhall, Suffolk 33,000- 40,000 Monday-Friday, 08:00-17:00 A well-established manufacturer in Mildenhall, Suffolk, is growing its team to keep up with rising demand and is looking for a talented Toolmaker ready to step into a Mechanical Design Engineer role. Whether you've worked with CAD before or are completely new to design, the company offers full training and ongoing support to help you grow and succeed. What's the pay & hours? This is a full-time, permanent position offering a competitive salary of 33,000 to 40,000 per annum, depending on experience. Standard working hours are Monday to Friday, 08:00 - 17:00. Toolmaker Duties, with a Design Focus: Take a lead role in the design and development of production tooling and fixtures Support engineering projects from concept through to completion Create technical drawings, parts lists, and instructions for production use Manufacture and test tooling using traditional toolroom/workshop machinery Develop and run product testing, analyse results, and assess reliability Maintain detailed documentation and provide updates to senior management Work within ISO quality and regulatory standards Attend occasional UK/international travel for project-related work Participate in relevant training courses to support your transition into design Who are we looking for? We're interested in two types of candidates: A Toolmaker with little to no design experience who is eager to step into a Mechanical Design Engineer role (full training provided), or A Design Engineer who has hands-on experience from a toolmaking background Ideally, you'll have: Experience with toolroom/workshop-based machinery Familiarity with 3D CAD software like SolidWorks (training can be provided) A qualification in Mechanical Engineering, Product Design, or equivalent experience A proactive, self-motivated attitude and strong teamwork skills Confidence with written and verbal communication, including MS Office and Adobe What are the benefits? Hands-on training and mentoring from senior engineers A clear pathway into a Mechanical Design Engineer role Exposure to both shopfloor and CAD-based design work Free on-site parking Career growth opportunities as part of a forward-thinking engineering team If you're a Toolmaker ready to move into design, or someone with both practical and design skills, we'd love to hear from you. Apply now or get in touch with Appointments for more details.