Role Information: Job Title - Test and Validation Electrical Lead Salary - Up to 38,000 DOE Location - Merthyr Tydfil, South Wales Starting - September 2026 Why join Marshall Land Systems in this role: The Test Validation & Electrical Lead is responsible for leading all electrical test and validation activities, ensuring that systems, components and assemblies are verified against engineering specifications, regulatory standards and customer requirements prior to delivery. The role provides technical leadership and governance across electrical testing and validation, driving compliance, safety and quality while ensuring robust, repeatable test processes that support on-time delivery and right-first-time performance. Your responsibilities in this role include: Lead test planning, validation strategy and readiness in line with production schedules and project milestones Own and govern electrical test plans, procedures, standards and work instructions, ensuring consistency and compliance Oversee execution of in-process, system-level and Factory Acceptance Testing (FAT) for electrical systems and assemblies Act as the technical authority for electrical testing, including continuity, insulation resistance, functional testing and diagnostics Ensure all electrical installations are verified against schematics, wiring diagrams and technical specifications Lead complex fault finding, root cause analysis and implementation of corrective actions Own the identification, escalation and resolution of non-conformances (NCRs), ensuring robust close-out and learning capture Define and enforce quality gates, ensuring all electrical systems meet safety, compliance and performance standards prior to progression or delivery Ensure accuracy, completeness and governance of test records, certification packs and electrical compliance documentation Provide clear reporting and communication of test progress, risks and issues to senior Lead continuous improvement initiatives across test and validation processes, driving efficiency, standardisation and quality improvements Support and lead internal and external audits, ensuring adherence to electrical standards, regulatory requirements and best practice Own calibration, maintenance and safe use of electrical test equipment and instrumentation Ensure adherence to 5S and high standards of housekeeping within the test environment Provide leadership, coaching and technical guidance to test engineers and technicians Promote and enforce Health, Safety and Environmental (HSE) compliance, with a strong focus on electrical safety and safe systems of work Ensure compliance with all legal, statutory and contractual obligations Support production and project teams in resolving technical issues and improving overall product performance Apply if you have most of the following: Significant experience within a manufacturing, production or engineering environment with a strong electrical testing focus Proven experience leading or coordinating electrical testing, validation or commissioning Background in testing electrical systems, control panels, machinery or integrated systems Experience working to production schedules, project milestones and delivery targets Strong knowledge of electrical standards, regulations and quality frameworks (e.g. ISO 9001, wiring regulations) Demonstrated experience in fault finding, diagnostics and root cause analysis at system level Experience driving process improvements and standardisation within a test or engineering environment Ability to influence, guide and support cross-functional teams Technical skills/education: Relevant electrical qualification (e.g. City & Guilds, NVQ, HNC/HND or Degree in Electrical Engineering or equivalent) Strong ability to read and interpret electrical schematics, wiring diagrams and technical documentation Advanced understanding of electrical testing methodologies, validation processes and safety standards Expertise in the use of electrical test equipment (e.g. multimeters, insulation resistance testers, continuity testers and specialist instrumentation) Strong knowledge of system-level testing and integration (electrical/mechanical interface) Ability to analyse, interpret and present test data to support decision-making In-depth experience of Factory Acceptance Testing (FAT), validation and inspection processes Strong understanding of non-conformance management (NCR) and structured problem solving methodologies (e.g. root cause analysis) Excellent electrical fault-finding and diagnostic capability Additional local needs: Onsite role Successful candidates will be required to complete a BPSS check The benefits of this role include: Opportunity to lead and shape electrical test and validation activities within a complex engineering environment Development of technical leadership and subject matter expertise in electrical systems and compliance Exposure to high-value, multidisciplinary engineering projects Involvement in driving quality, safety and continuous improvement at a strategic level Cross-functional influence across production, engineering, quality and project delivery Marshall Land Systems is a Canadian-owned global company with an unrivalled pedigree of British engineering excellence. From its origins in Cambridge, UK, through more than a century of innovation, pioneering advances from the nose of Concorde to the early Hydrogen fuel cell technology that ultimately powered the moon landings, Marshall engineers now continue to innovate specialist vehicles and infrastructure for NATO forces across the world. From bomb disposal vehicles to deployed shelters, from command and control to CT scanners on the battlefield, Marshall Land Systems protects people in critical situations with the very best in engineering. It employs 600 people with major facilities the UK, Canada, and the Netherlands.
May 20, 2026
Full time
Role Information: Job Title - Test and Validation Electrical Lead Salary - Up to 38,000 DOE Location - Merthyr Tydfil, South Wales Starting - September 2026 Why join Marshall Land Systems in this role: The Test Validation & Electrical Lead is responsible for leading all electrical test and validation activities, ensuring that systems, components and assemblies are verified against engineering specifications, regulatory standards and customer requirements prior to delivery. The role provides technical leadership and governance across electrical testing and validation, driving compliance, safety and quality while ensuring robust, repeatable test processes that support on-time delivery and right-first-time performance. Your responsibilities in this role include: Lead test planning, validation strategy and readiness in line with production schedules and project milestones Own and govern electrical test plans, procedures, standards and work instructions, ensuring consistency and compliance Oversee execution of in-process, system-level and Factory Acceptance Testing (FAT) for electrical systems and assemblies Act as the technical authority for electrical testing, including continuity, insulation resistance, functional testing and diagnostics Ensure all electrical installations are verified against schematics, wiring diagrams and technical specifications Lead complex fault finding, root cause analysis and implementation of corrective actions Own the identification, escalation and resolution of non-conformances (NCRs), ensuring robust close-out and learning capture Define and enforce quality gates, ensuring all electrical systems meet safety, compliance and performance standards prior to progression or delivery Ensure accuracy, completeness and governance of test records, certification packs and electrical compliance documentation Provide clear reporting and communication of test progress, risks and issues to senior Lead continuous improvement initiatives across test and validation processes, driving efficiency, standardisation and quality improvements Support and lead internal and external audits, ensuring adherence to electrical standards, regulatory requirements and best practice Own calibration, maintenance and safe use of electrical test equipment and instrumentation Ensure adherence to 5S and high standards of housekeeping within the test environment Provide leadership, coaching and technical guidance to test engineers and technicians Promote and enforce Health, Safety and Environmental (HSE) compliance, with a strong focus on electrical safety and safe systems of work Ensure compliance with all legal, statutory and contractual obligations Support production and project teams in resolving technical issues and improving overall product performance Apply if you have most of the following: Significant experience within a manufacturing, production or engineering environment with a strong electrical testing focus Proven experience leading or coordinating electrical testing, validation or commissioning Background in testing electrical systems, control panels, machinery or integrated systems Experience working to production schedules, project milestones and delivery targets Strong knowledge of electrical standards, regulations and quality frameworks (e.g. ISO 9001, wiring regulations) Demonstrated experience in fault finding, diagnostics and root cause analysis at system level Experience driving process improvements and standardisation within a test or engineering environment Ability to influence, guide and support cross-functional teams Technical skills/education: Relevant electrical qualification (e.g. City & Guilds, NVQ, HNC/HND or Degree in Electrical Engineering or equivalent) Strong ability to read and interpret electrical schematics, wiring diagrams and technical documentation Advanced understanding of electrical testing methodologies, validation processes and safety standards Expertise in the use of electrical test equipment (e.g. multimeters, insulation resistance testers, continuity testers and specialist instrumentation) Strong knowledge of system-level testing and integration (electrical/mechanical interface) Ability to analyse, interpret and present test data to support decision-making In-depth experience of Factory Acceptance Testing (FAT), validation and inspection processes Strong understanding of non-conformance management (NCR) and structured problem solving methodologies (e.g. root cause analysis) Excellent electrical fault-finding and diagnostic capability Additional local needs: Onsite role Successful candidates will be required to complete a BPSS check The benefits of this role include: Opportunity to lead and shape electrical test and validation activities within a complex engineering environment Development of technical leadership and subject matter expertise in electrical systems and compliance Exposure to high-value, multidisciplinary engineering projects Involvement in driving quality, safety and continuous improvement at a strategic level Cross-functional influence across production, engineering, quality and project delivery Marshall Land Systems is a Canadian-owned global company with an unrivalled pedigree of British engineering excellence. From its origins in Cambridge, UK, through more than a century of innovation, pioneering advances from the nose of Concorde to the early Hydrogen fuel cell technology that ultimately powered the moon landings, Marshall engineers now continue to innovate specialist vehicles and infrastructure for NATO forces across the world. From bomb disposal vehicles to deployed shelters, from command and control to CT scanners on the battlefield, Marshall Land Systems protects people in critical situations with the very best in engineering. It employs 600 people with major facilities the UK, Canada, and the Netherlands.
Warehouse & Goods In Operative / Driver Location: St Albans (with weekly travel to Kent site) Contract: Temporary to Permanent (After 13 Weeks) Rate: £14.00 - £15 per hour Hours: Monday to Friday, 8:30am 5:00pm Start: ASAP Our client is a growing UK manufacturer of high-quality bespoke display and meeting room solutions, supplying premium products to corporate clients and professional organisations. Their work combines engineering precision, craftsmanship, and creative design to produce tailor-made installations that meet exacting standards of performance and presentation. They are now seeking a hands-on, detail-oriented individual to join their team as a Warehouse Operative / Assembly & Delivery Technician. This role offers a progression route into management positions as others have already done within the business! Key Responsibilities: Warehouse & Goods In: Receive, inspect, and record incoming materials; manage stock storage and organisation; prepare and label goods for dispatch; maintain a clean, safe, and efficient workspace. Assembly & Production: Assist in assembling bespoke products to technical drawings; use hand tools and measuring equipment to build frames, panels, and components; carry out sub-assemblies and ensure all work meets quality standards. Quality Control & Packing: Inspect items for accuracy, damage, and finish; check assemblies against drawings; carefully pack and wrap products to prevent damage during transport. Driving & Deliveries: Drive between the St Albans and Kent sites (typically 1 2 times per week); safely load and unload goods; maintain a roadworthy company vehicle; ensure punctual and professional delivery. The Successful Candidate Requires: Previous experience in a warehouse , goods-in , or stock control environment Enthusiastic and keen to learn with a view to long-term development A practical, hands-on approach and excellent attention to detail Physically fit and comfortable with manual handling (up to 25kg) A full, clean UK driving licence Reliable, organised, and comfortable working independently or as part of a small team Benefits: Progression route into management Temp-to-perm opportunity with long-term career growth Overtime opportunities available once permanent Supportive, friendly working environment On-the-job training and skill development ATA is committed to creating a diverse workforce and is an equal opportunities employer. We welcome applications from all suitably qualified persons regardless of age, disability, gender, marriage and civil partnership, pregnancy and maternity, race, religion or belief, sex, and sexual orientation
May 20, 2026
Full time
Warehouse & Goods In Operative / Driver Location: St Albans (with weekly travel to Kent site) Contract: Temporary to Permanent (After 13 Weeks) Rate: £14.00 - £15 per hour Hours: Monday to Friday, 8:30am 5:00pm Start: ASAP Our client is a growing UK manufacturer of high-quality bespoke display and meeting room solutions, supplying premium products to corporate clients and professional organisations. Their work combines engineering precision, craftsmanship, and creative design to produce tailor-made installations that meet exacting standards of performance and presentation. They are now seeking a hands-on, detail-oriented individual to join their team as a Warehouse Operative / Assembly & Delivery Technician. This role offers a progression route into management positions as others have already done within the business! Key Responsibilities: Warehouse & Goods In: Receive, inspect, and record incoming materials; manage stock storage and organisation; prepare and label goods for dispatch; maintain a clean, safe, and efficient workspace. Assembly & Production: Assist in assembling bespoke products to technical drawings; use hand tools and measuring equipment to build frames, panels, and components; carry out sub-assemblies and ensure all work meets quality standards. Quality Control & Packing: Inspect items for accuracy, damage, and finish; check assemblies against drawings; carefully pack and wrap products to prevent damage during transport. Driving & Deliveries: Drive between the St Albans and Kent sites (typically 1 2 times per week); safely load and unload goods; maintain a roadworthy company vehicle; ensure punctual and professional delivery. The Successful Candidate Requires: Previous experience in a warehouse , goods-in , or stock control environment Enthusiastic and keen to learn with a view to long-term development A practical, hands-on approach and excellent attention to detail Physically fit and comfortable with manual handling (up to 25kg) A full, clean UK driving licence Reliable, organised, and comfortable working independently or as part of a small team Benefits: Progression route into management Temp-to-perm opportunity with long-term career growth Overtime opportunities available once permanent Supportive, friendly working environment On-the-job training and skill development ATA is committed to creating a diverse workforce and is an equal opportunities employer. We welcome applications from all suitably qualified persons regardless of age, disability, gender, marriage and civil partnership, pregnancy and maternity, race, religion or belief, sex, and sexual orientation
Panel Beater Location: Edinburgh Salary: £21 per hour (£55,000+ OTE) Hours: Monday to Friday, 40 hours per week Benefits: 29 days holiday, achievable time saved bonus, flexible start and finish times The Opportunity We're looking for a skilled and experienced Panel Beater to join a busy and well-established accident repair centre. This is an excellent opportunity for someone from a similar bodyshop or accident repair background who takes pride in delivering high-quality workmanship and thrives in a fast-paced environment. Working with the latest tools and repair techniques, you'll play a key role in restoring vehicles to manufacturer standards while contributing to a high-performing team. What you'll be doing as the Panel Beater: Carrying out high-quality accident repairs in line with manufacturer and customer standards Removing, repairing, and replacing damaged panels Using welding equipment, dent pulling tools, and filler techniques Aligning panels and components to ensure a precise fit Working efficiently to meet deadlines and productivity targets Maintaining a clean, safe, and organised workspace Keeping up to date with modern repair methods and industry standards What we're looking for: Previous experience in a similar Panel Beater / Panel Technician role within a busy bodyshop Recognised apprenticeship in Panel Beating or Vehicle Body Repair NVQ Level 3 / ATA accreditation (or equivalent) Strong knowledge of modern repair techniques for crash damage Ability to work under pressure while maintaining high standards A motivated team player with a focus on quality and achieving bonus targets Click 'Apply Now' to take the next step in your career. INDHW
May 20, 2026
Full time
Panel Beater Location: Edinburgh Salary: £21 per hour (£55,000+ OTE) Hours: Monday to Friday, 40 hours per week Benefits: 29 days holiday, achievable time saved bonus, flexible start and finish times The Opportunity We're looking for a skilled and experienced Panel Beater to join a busy and well-established accident repair centre. This is an excellent opportunity for someone from a similar bodyshop or accident repair background who takes pride in delivering high-quality workmanship and thrives in a fast-paced environment. Working with the latest tools and repair techniques, you'll play a key role in restoring vehicles to manufacturer standards while contributing to a high-performing team. What you'll be doing as the Panel Beater: Carrying out high-quality accident repairs in line with manufacturer and customer standards Removing, repairing, and replacing damaged panels Using welding equipment, dent pulling tools, and filler techniques Aligning panels and components to ensure a precise fit Working efficiently to meet deadlines and productivity targets Maintaining a clean, safe, and organised workspace Keeping up to date with modern repair methods and industry standards What we're looking for: Previous experience in a similar Panel Beater / Panel Technician role within a busy bodyshop Recognised apprenticeship in Panel Beating or Vehicle Body Repair NVQ Level 3 / ATA accreditation (or equivalent) Strong knowledge of modern repair techniques for crash damage Ability to work under pressure while maintaining high standards A motivated team player with a focus on quality and achieving bonus targets Click 'Apply Now' to take the next step in your career. INDHW
Panel Beater Location: Aberdeen Annual Salary: £55,000 + per year Hours: Monday to Friday 40h week Extras: 29 Days holiday, Achievable Time Saved Bonus, Flexible start & finish times Our Client is looking for a skilled and experienced Panel Beater / Panel Technician . This role is perfect for someone with ATA accreditation or NVQ Level 3 (or equivalent) who thrives in a fast-paced accident repair centre. You will be responsible for repairing damaged vehicles to manufacturer specifications using the latest tools and techniques. Key Responsibilities for Panel Beater / Panel Technician: Perform high-quality accident repairs, ensuring work meets manufacturer and customer standards Remove, repair, and replace damaged panels Use welding equipment, dent pullers, and filler techniques for panel repairs Align body panels and parts for assembly and ensure a perfect fit Work efficiently within a team to meet deadlines and production targets Maintain a clean, safe, and organized work environment Stay up to date with modern vehicle repair techniques and industry standards Skills and Qualifications for Panel Beater / Panel Technician: Recognised apprenticeship in Panel Beating or Vehicle Body Repair NVQ Level 3 / VCQ / SVQ / ATA accreditation or equivalent qualification Previous experience working as a Panel Beater / Panel Technician in a busy body shop Strong knowledge of modern repair techniques for minor and moderate crash repair Ability to work efficiently under pressure while maintaining high standards Self-motivated team player with a focus on customer satisfaction and bonus targets Click 'Apply Now' to take the next step in your career. INDHW
May 20, 2026
Full time
Panel Beater Location: Aberdeen Annual Salary: £55,000 + per year Hours: Monday to Friday 40h week Extras: 29 Days holiday, Achievable Time Saved Bonus, Flexible start & finish times Our Client is looking for a skilled and experienced Panel Beater / Panel Technician . This role is perfect for someone with ATA accreditation or NVQ Level 3 (or equivalent) who thrives in a fast-paced accident repair centre. You will be responsible for repairing damaged vehicles to manufacturer specifications using the latest tools and techniques. Key Responsibilities for Panel Beater / Panel Technician: Perform high-quality accident repairs, ensuring work meets manufacturer and customer standards Remove, repair, and replace damaged panels Use welding equipment, dent pullers, and filler techniques for panel repairs Align body panels and parts for assembly and ensure a perfect fit Work efficiently within a team to meet deadlines and production targets Maintain a clean, safe, and organized work environment Stay up to date with modern vehicle repair techniques and industry standards Skills and Qualifications for Panel Beater / Panel Technician: Recognised apprenticeship in Panel Beating or Vehicle Body Repair NVQ Level 3 / VCQ / SVQ / ATA accreditation or equivalent qualification Previous experience working as a Panel Beater / Panel Technician in a busy body shop Strong knowledge of modern repair techniques for minor and moderate crash repair Ability to work efficiently under pressure while maintaining high standards Self-motivated team player with a focus on customer satisfaction and bonus targets Click 'Apply Now' to take the next step in your career. INDHW
Panel Beater OTE: £60,000 + time saved bonus Panel Beater Details Basic Salary: £40,000 - £50,000 DOE Working Hours:8am - 5pm (Monday to Friday - 42.5 hours per week) Location:Aberdeen Talented and efficient Panel Beater to join this leading team. For this Panel Beater role, you will be repairing damaged vehicles in line with the manufacturers' specifications within a state-of-the-art Bodyshop, utilising modern equipment and techniques. Responsibilities of a Panel Beater Work efficiently in a fast-paced accident repair centre Follow the correct repair techniques and produce work in line with factory specifications and customer satisfaction Skills and Qualifications of a Panel Beater You will have served a recognised apprenticeship as a Panel Beater and gained a technical qualification (such as NVQ / VCQ / SVQ / ATA). You must have previous experience working as a Panel Beater within a busy body shop and be a strong team player with a self-motivation to earn bonus hours. You will work to the highest standard and demonstrate a sound up-to-date knowledge of vehicle repair techniques. If you think you are a good fit for this Panel Beater role, please contact Skills and state reference job number 53345. Don't worry if your CV is out of date. Get in touch and we can work that out later. As well as this Panel Beater role, Auto Skills UK is recognized as the leading provider of temporary and permanent staffing solutions, from productive trades to senior management and are always looking for candidates within the Bodyshop including: Panel Beater, Panel Technician, Vehicle Panel Beater, Bodyshop Panel Beater
May 20, 2026
Full time
Panel Beater OTE: £60,000 + time saved bonus Panel Beater Details Basic Salary: £40,000 - £50,000 DOE Working Hours:8am - 5pm (Monday to Friday - 42.5 hours per week) Location:Aberdeen Talented and efficient Panel Beater to join this leading team. For this Panel Beater role, you will be repairing damaged vehicles in line with the manufacturers' specifications within a state-of-the-art Bodyshop, utilising modern equipment and techniques. Responsibilities of a Panel Beater Work efficiently in a fast-paced accident repair centre Follow the correct repair techniques and produce work in line with factory specifications and customer satisfaction Skills and Qualifications of a Panel Beater You will have served a recognised apprenticeship as a Panel Beater and gained a technical qualification (such as NVQ / VCQ / SVQ / ATA). You must have previous experience working as a Panel Beater within a busy body shop and be a strong team player with a self-motivation to earn bonus hours. You will work to the highest standard and demonstrate a sound up-to-date knowledge of vehicle repair techniques. If you think you are a good fit for this Panel Beater role, please contact Skills and state reference job number 53345. Don't worry if your CV is out of date. Get in touch and we can work that out later. As well as this Panel Beater role, Auto Skills UK is recognized as the leading provider of temporary and permanent staffing solutions, from productive trades to senior management and are always looking for candidates within the Bodyshop including: Panel Beater, Panel Technician, Vehicle Panel Beater, Bodyshop Panel Beater
BODYSHOP ESTIMATOR Bodyshop Estimator details: Basic Salary:£30,000 - £40,000+ and Quarterly Bonuses Structures Working Hours:Monday - Friday (40 hours per week) Location:Cleckheaton A busy, modern accident repair centre is looking for a Bodyshop Estimator to join their team. You'll be responsible for producing accurate repair estimates, ensuring all work meets manufacturer standards, and supporting a smooth, efficient workflow across the Bodyshop. Responsibilities of a Bodyshop Estimator Accurately assess vehicle damage and produce detailed repair estimates using digital platforms such as Audatex or GT Motive. Identify correct repair methods in line with manufacturer repair methods (MRMs), including considerations for EV and hybrid vehicles. Liaise with insurers, engineers, and internal teams to agree repair costs, updates, and authorisations. Monitor ongoing repairs, updating estimates where required and ensuring work progresses efficiently and within agreed timescales. Maintain compliance with BSI PAS 10125 standards and ensure all repairs meet safety, quality, and customer expectations. Skills and Qualifications of a Bodyshop Estimator Proven experience as an Estimator, VDA, Panel Technician, Paint Technician, MET Technician/Strip Fitter, within a fast-paced accident repair centre. Other roles within a Bodyshop will also be considered. Strong knowledge of modern vehicle construction, repair techniques, and manufacturer standards (including high-strength steels and aluminium). Ideally have an ATA accreditation or VDA (preferred) and proficiency in estimating systems such as Audatex (up-to-date certification essential) Strong IT and system skills. Good understanding of electric and hybrid vehicle repair processes, including safety considerations. Excellent communication, organisation, and attention to detail, with the ability to manage workloads and maximise efficiency. If you think you are a good fit for this Bodyshop Estimator role, please contact UK and state reference job number 53773. Don't worry if your CV is out of date. Get in touch and we can work that out later. AutoSkills UK are a leading specialist in automotive recruitment, providing both temporary and permanent staffing solutions from skilled trades through to senior management. We are always looking to connect with experienced candidates across the Bodyshop sector, including: Bodyshop Quality Controllers, Workshop Controllers, Bodyshop Managers, Bodyshop Assistant Managers, MET Technicians/Strip Fitters, Panel Beaters, Paint Sprayers, and Preppers
May 19, 2026
Full time
BODYSHOP ESTIMATOR Bodyshop Estimator details: Basic Salary:£30,000 - £40,000+ and Quarterly Bonuses Structures Working Hours:Monday - Friday (40 hours per week) Location:Cleckheaton A busy, modern accident repair centre is looking for a Bodyshop Estimator to join their team. You'll be responsible for producing accurate repair estimates, ensuring all work meets manufacturer standards, and supporting a smooth, efficient workflow across the Bodyshop. Responsibilities of a Bodyshop Estimator Accurately assess vehicle damage and produce detailed repair estimates using digital platforms such as Audatex or GT Motive. Identify correct repair methods in line with manufacturer repair methods (MRMs), including considerations for EV and hybrid vehicles. Liaise with insurers, engineers, and internal teams to agree repair costs, updates, and authorisations. Monitor ongoing repairs, updating estimates where required and ensuring work progresses efficiently and within agreed timescales. Maintain compliance with BSI PAS 10125 standards and ensure all repairs meet safety, quality, and customer expectations. Skills and Qualifications of a Bodyshop Estimator Proven experience as an Estimator, VDA, Panel Technician, Paint Technician, MET Technician/Strip Fitter, within a fast-paced accident repair centre. Other roles within a Bodyshop will also be considered. Strong knowledge of modern vehicle construction, repair techniques, and manufacturer standards (including high-strength steels and aluminium). Ideally have an ATA accreditation or VDA (preferred) and proficiency in estimating systems such as Audatex (up-to-date certification essential) Strong IT and system skills. Good understanding of electric and hybrid vehicle repair processes, including safety considerations. Excellent communication, organisation, and attention to detail, with the ability to manage workloads and maximise efficiency. If you think you are a good fit for this Bodyshop Estimator role, please contact UK and state reference job number 53773. Don't worry if your CV is out of date. Get in touch and we can work that out later. AutoSkills UK are a leading specialist in automotive recruitment, providing both temporary and permanent staffing solutions from skilled trades through to senior management. We are always looking to connect with experienced candidates across the Bodyshop sector, including: Bodyshop Quality Controllers, Workshop Controllers, Bodyshop Managers, Bodyshop Assistant Managers, MET Technicians/Strip Fitters, Panel Beaters, Paint Sprayers, and Preppers
MET Technician Location : Wembley Basic Salary : £45,000 - £65,000 OTE Hours: 40hour week Monday to Friday (No Saturdays) Job Description: Our client is looking for a talented and efficient MET Strip Fitter / MET Technician to join this leading team. You will be repairing damaged vehicles in line with the manufacturers' specifications within a state of the art body shop, utilising modern equipment and techniques. Qualifications required for an MET Strip Fitter / MET Technician: Will have served a recognised apprenticeship as a MET Strip Fitter / MET Technician and gained a technical qualification (such as NVQ / ATA /IMI/ SVQ) Must have previous experience working as a MET Technician / MET Strip Fitter within a busy body shop and be a strong team player with a self-motivation to earn bonus hours LCV experience Relevant mechanical and suspension qualifications Steering Geometry alignment and adjustment Glazing, minor panel repairs. Preparation and priming of a new / repaired panel to first masking stage Air Conditioning system evacuation and recharge Working with Plastic repairs Duties of an MET Strip Fitter / MET Technician: Work efficiently in a fast-paced accident repair centre Follow the correct repair techniques and produce work in line with factory specifications and customer satisfaction Click 'Apply Now' if interested in joining this dynamic team. INDLP
May 19, 2026
Full time
MET Technician Location : Wembley Basic Salary : £45,000 - £65,000 OTE Hours: 40hour week Monday to Friday (No Saturdays) Job Description: Our client is looking for a talented and efficient MET Strip Fitter / MET Technician to join this leading team. You will be repairing damaged vehicles in line with the manufacturers' specifications within a state of the art body shop, utilising modern equipment and techniques. Qualifications required for an MET Strip Fitter / MET Technician: Will have served a recognised apprenticeship as a MET Strip Fitter / MET Technician and gained a technical qualification (such as NVQ / ATA /IMI/ SVQ) Must have previous experience working as a MET Technician / MET Strip Fitter within a busy body shop and be a strong team player with a self-motivation to earn bonus hours LCV experience Relevant mechanical and suspension qualifications Steering Geometry alignment and adjustment Glazing, minor panel repairs. Preparation and priming of a new / repaired panel to first masking stage Air Conditioning system evacuation and recharge Working with Plastic repairs Duties of an MET Strip Fitter / MET Technician: Work efficiently in a fast-paced accident repair centre Follow the correct repair techniques and produce work in line with factory specifications and customer satisfaction Click 'Apply Now' if interested in joining this dynamic team. INDLP
BODYSHOP ESTIMATOR Bodyshop Estimator details: Basic Salary:£30,000 - £40,000+ and Quarterly Bonuses Structures Working Hours:Monday - Friday (40 hours per week) Location:Sunderland A busy, modern accident repair centre is looking for a Bodyshop Estimator to join their team. You'll be responsible for producing accurate repair estimates, ensuring all work meets manufacturer standards, and supporting a smooth, efficient workflow across the Bodyshop. Responsibilities of a Bodyshop Estimator Accurately assess vehicle damage and produce detailed repair estimates using digital platforms such as Audatex or GT Motive. Identify correct repair methods in line with manufacturer repair methods (MRMs), including considerations for EV and hybrid vehicles. Liaise with insurers, engineers, and internal teams to agree repair costs, updates, and authorisations. Monitor ongoing repairs, updating estimates where required and ensuring work progresses efficiently and within agreed timescales. Maintain compliance with BSI PAS 10125 standards and ensure all repairs meet safety, quality, and customer expectations. Skills and Qualifications of a Bodyshop Estimator Proven experience as an Estimator, VDA, Panel Technician, Paint Technician, MET Technician/Strip Fitter, within a fast-paced accident repair centre. Other roles within a Bodyshop will also be considered. Strong knowledge of modern vehicle construction, repair techniques, and manufacturer standards (including high-strength steels and aluminium). Ideally have an ATA accreditation or VDA (preferred) and proficiency in estimating systems such as Audatex (up-to-date certification essential) Strong IT and system skills. Good understanding of electric and hybrid vehicle repair processes, including safety considerations. Excellent communication, organisation, and attention to detail, with the ability to manage workloads and maximise efficiency. If you think you are a good fit for this Bodyshop Estimator role, please contact UK and state reference job number 53768. Don't worry if your CV is out of date. Get in touch and we can work that out later. AutoSkills UK are a leading specialist in automotive recruitment, providing both temporary and permanent staffing solutions from skilled trades through to senior management. We are always looking to connect with experienced candidates across the Bodyshop sector, including: Bodyshop Quality Controllers, Workshop Controllers, Bodyshop Managers, Bodyshop Assistant Managers, MET Technicians/Strip Fitters, Panel Beaters, Paint Sprayers, and Preppers
May 19, 2026
Full time
BODYSHOP ESTIMATOR Bodyshop Estimator details: Basic Salary:£30,000 - £40,000+ and Quarterly Bonuses Structures Working Hours:Monday - Friday (40 hours per week) Location:Sunderland A busy, modern accident repair centre is looking for a Bodyshop Estimator to join their team. You'll be responsible for producing accurate repair estimates, ensuring all work meets manufacturer standards, and supporting a smooth, efficient workflow across the Bodyshop. Responsibilities of a Bodyshop Estimator Accurately assess vehicle damage and produce detailed repair estimates using digital platforms such as Audatex or GT Motive. Identify correct repair methods in line with manufacturer repair methods (MRMs), including considerations for EV and hybrid vehicles. Liaise with insurers, engineers, and internal teams to agree repair costs, updates, and authorisations. Monitor ongoing repairs, updating estimates where required and ensuring work progresses efficiently and within agreed timescales. Maintain compliance with BSI PAS 10125 standards and ensure all repairs meet safety, quality, and customer expectations. Skills and Qualifications of a Bodyshop Estimator Proven experience as an Estimator, VDA, Panel Technician, Paint Technician, MET Technician/Strip Fitter, within a fast-paced accident repair centre. Other roles within a Bodyshop will also be considered. Strong knowledge of modern vehicle construction, repair techniques, and manufacturer standards (including high-strength steels and aluminium). Ideally have an ATA accreditation or VDA (preferred) and proficiency in estimating systems such as Audatex (up-to-date certification essential) Strong IT and system skills. Good understanding of electric and hybrid vehicle repair processes, including safety considerations. Excellent communication, organisation, and attention to detail, with the ability to manage workloads and maximise efficiency. If you think you are a good fit for this Bodyshop Estimator role, please contact UK and state reference job number 53768. Don't worry if your CV is out of date. Get in touch and we can work that out later. AutoSkills UK are a leading specialist in automotive recruitment, providing both temporary and permanent staffing solutions from skilled trades through to senior management. We are always looking to connect with experienced candidates across the Bodyshop sector, including: Bodyshop Quality Controllers, Workshop Controllers, Bodyshop Managers, Bodyshop Assistant Managers, MET Technicians/Strip Fitters, Panel Beaters, Paint Sprayers, and Preppers
MET TECHNICIAN (MECHANICAL, ELECTRICAL & TRIM) OTE: £50,000 MET Technician (Mechanical, Electrical & Trim) details: Basic Salary: £40,000 + Overtime available Working Hours: Monday - Friday (Flexi Start - 40 hours per week) Location: Oldham, Greater Manchester A skilled and motivated MET Technician (Mechanical, Electrical & Trim is required for a busy, modern Bodyshop, well-equipped Bodyshop with the latest technology. You will be responsible for dismantling, repairing, and reassembling vehicles in line with manufacturer repair methods using the latest tools, equipment, and diagnostic systems. Working in a fast-paced accident repair centre, you will play a key role in ensuring vehicles are repaired safely, efficiently, and to the highest quality standards, with strong earning potential through bonus opportunities. You will receive ongoing training and development, especially in EV and emerging vehicle technologies, in a supportive, team-focused environment. The ideal candidate will have a strong Bodyshop background and be confident in demonstrating multi skilled abilities in panel beating and paint spraying/refinishing. Responsibilities of an MET Technician Carry out efficient removal and refitting (strip & fit) of mechanical, electrical, and trim components on a wide range of vehicles, including electric and hybrid models. Diagnose faults and complete mechanical and electrical repairs in line with manufacturer repair methods (MRMs). Use modern diagnostic equipment and follow manufacturer guidelines to ensure accurate repair and fault resolution. Interpret digital job cards, repair specifications, and technical data using Bodyshop management systems (e.g., Audatex, Autoflow). Support ADAS (Advanced Driver Assistance Systems) processes, including calibration awareness following vehicle repairs. Ensure all work meets BSI PAS 10125 standards, maintaining a strong focus on safety, compliance, and quality. Collaborate effectively with Panel Beaters, Paint Sprayers, and VDA teams to maintain workflow efficiency and maximise productivity. Skills and Qualifications of an MET Technician Recognised apprenticeship or Level 3 qualification in Vehicle Mechanical, Electrical & Trim (NVQ / IMI / SVQ / ATA), with a commitment to continuous professional development. Proven experience working as an MET Technician / Strip Fitter in a high-volume, fast-paced accident repair environment. Strong knowledge of modern vehicle systems, including electrical diagnostics, CAN systems, and hybrid/electric vehicle safety procedures. Competent in the use of diagnostic tools, repair method software, and digital workshop systems. Understanding of ADAS components and the importance of correct calibration processes. High attention to detail, self-motivation, and ability to meet or exceed productivity targets while maintaining exceptional quality standards. If you think you are a good fit for this MET Technician (Mechanical, Electrical & Trim) role, please contact UK and state reference job number 53759. Don't worry if your CV is out of date - get in touch and we can work that out later. AutoSkills UK is a leading automotive recruitment specialist, providing both temporary and permanent staffing solutions from skilled trades through to senior management. We are always looking to connect with experienced Bodyshop professionals, including: Vehicle Damage Assessors / Estimators, Panel Beaters, Paint Sprayers, Vehicle Damage Assessors, Workshop Controllers, Bodyshop Managers, and Quality Controllers.
May 19, 2026
Full time
MET TECHNICIAN (MECHANICAL, ELECTRICAL & TRIM) OTE: £50,000 MET Technician (Mechanical, Electrical & Trim) details: Basic Salary: £40,000 + Overtime available Working Hours: Monday - Friday (Flexi Start - 40 hours per week) Location: Oldham, Greater Manchester A skilled and motivated MET Technician (Mechanical, Electrical & Trim is required for a busy, modern Bodyshop, well-equipped Bodyshop with the latest technology. You will be responsible for dismantling, repairing, and reassembling vehicles in line with manufacturer repair methods using the latest tools, equipment, and diagnostic systems. Working in a fast-paced accident repair centre, you will play a key role in ensuring vehicles are repaired safely, efficiently, and to the highest quality standards, with strong earning potential through bonus opportunities. You will receive ongoing training and development, especially in EV and emerging vehicle technologies, in a supportive, team-focused environment. The ideal candidate will have a strong Bodyshop background and be confident in demonstrating multi skilled abilities in panel beating and paint spraying/refinishing. Responsibilities of an MET Technician Carry out efficient removal and refitting (strip & fit) of mechanical, electrical, and trim components on a wide range of vehicles, including electric and hybrid models. Diagnose faults and complete mechanical and electrical repairs in line with manufacturer repair methods (MRMs). Use modern diagnostic equipment and follow manufacturer guidelines to ensure accurate repair and fault resolution. Interpret digital job cards, repair specifications, and technical data using Bodyshop management systems (e.g., Audatex, Autoflow). Support ADAS (Advanced Driver Assistance Systems) processes, including calibration awareness following vehicle repairs. Ensure all work meets BSI PAS 10125 standards, maintaining a strong focus on safety, compliance, and quality. Collaborate effectively with Panel Beaters, Paint Sprayers, and VDA teams to maintain workflow efficiency and maximise productivity. Skills and Qualifications of an MET Technician Recognised apprenticeship or Level 3 qualification in Vehicle Mechanical, Electrical & Trim (NVQ / IMI / SVQ / ATA), with a commitment to continuous professional development. Proven experience working as an MET Technician / Strip Fitter in a high-volume, fast-paced accident repair environment. Strong knowledge of modern vehicle systems, including electrical diagnostics, CAN systems, and hybrid/electric vehicle safety procedures. Competent in the use of diagnostic tools, repair method software, and digital workshop systems. Understanding of ADAS components and the importance of correct calibration processes. High attention to detail, self-motivation, and ability to meet or exceed productivity targets while maintaining exceptional quality standards. If you think you are a good fit for this MET Technician (Mechanical, Electrical & Trim) role, please contact UK and state reference job number 53759. Don't worry if your CV is out of date - get in touch and we can work that out later. AutoSkills UK is a leading automotive recruitment specialist, providing both temporary and permanent staffing solutions from skilled trades through to senior management. We are always looking to connect with experienced Bodyshop professionals, including: Vehicle Damage Assessors / Estimators, Panel Beaters, Paint Sprayers, Vehicle Damage Assessors, Workshop Controllers, Bodyshop Managers, and Quality Controllers.
PAINT SPRAYER / PAINT TECHNICIAN Paint Sprayer / Paint Technician details: Basic Salary: £45,000+ DOE + Time Saved Bonus & Unlimited Overtime Working Hours: Monday - Friday (40 hours per week) Location: Edinburgh Airport A skilled and experienced Paint Sprayer / Paint Technician is required for a busy, modern Bodyshop with. You will be responsible for delivering high-quality paint finishes using the latest equipment, materials, and techniques. You will be working in their advanced spray booths within a fast-paced accident repair centre. You will ensure all vehicles are prepared and refinished to manufacturer standards, with a strong focus on quality, efficiency, and achieving bonus targets. A supportive team environment, providing ongoing training and development, including EV and new paint technologies. Responsibilities of a Paint Sprayer / Paint Technician Prepare vehicles for refinishing, including masking, sanding, priming, and panel cleaning to ensure a high-quality finish. Mix and match paint in line with manufacturer specifications using water-based paint systems and colour matching technology. Apply paint using modern spray equipment, ensuring a flawless and consistent finish across all vehicle types, including electric and hybrid vehicles. Carry out quality control checks to identify and rectify defects such as runs, blemishes, or inconsistencies before vehicle handover. Follow manufacturer repair methods (MRMs) and paint system guidelines to ensure compliance and durability of repairs. Use digital job cards and Bodyshop management systems (e.g., Audatex, Autoflow) to track work and maintain efficiency. Maintain a clean, safe working environment in line with Health & Safety and BSI PAS 10125 standards. Work collaboratively with Preppers, Panel Beaters, and MET Technicians to ensure efficient workflow and maximise productivity. Skills and Qualifications of a Paint Sprayer / Paint Technician Recognised qualification in Vehicle Refinishing (NVQ / IMI / City & Guilds / ATA or equivalent), with a commitment to continuous professional development. Proven experience as a Paint Sprayer / Paint Technician in a high-volume Bodyshop environment. Strong knowledge of modern paint systems, including water-based paints, colour matching, and refinishing techniques. Awareness of repairs on modern vehicle materials and finishes, including EV-specific considerations. Ability to use digital systems, paint mixing software, and workshop management tools effectively. High attention to detail, excellent time management, and a strong focus on achieving high-quality results while meeting productivity targets. If you think you are a good fit for this Paint Sprayer role, please contact UK and state reference job number 53770. Don't worry if your CV is out of date - get in touch and we can work that out later. AutoSkills UK is a leading specialist in automotive recruitment, providing both temporary and permanent staffing solutions from skilled trades through to senior management. We are always looking to connect with experienced professionals across the Bodyshop sector, including: Paint Sprayers, Preppers, Panel Beaters, MET Technicians / Strip Fitters, Vehicle Damage Assessors, Workshop Controllers, Bodyshop Quality Controllers and Bodyshop Managers.
May 19, 2026
Full time
PAINT SPRAYER / PAINT TECHNICIAN Paint Sprayer / Paint Technician details: Basic Salary: £45,000+ DOE + Time Saved Bonus & Unlimited Overtime Working Hours: Monday - Friday (40 hours per week) Location: Edinburgh Airport A skilled and experienced Paint Sprayer / Paint Technician is required for a busy, modern Bodyshop with. You will be responsible for delivering high-quality paint finishes using the latest equipment, materials, and techniques. You will be working in their advanced spray booths within a fast-paced accident repair centre. You will ensure all vehicles are prepared and refinished to manufacturer standards, with a strong focus on quality, efficiency, and achieving bonus targets. A supportive team environment, providing ongoing training and development, including EV and new paint technologies. Responsibilities of a Paint Sprayer / Paint Technician Prepare vehicles for refinishing, including masking, sanding, priming, and panel cleaning to ensure a high-quality finish. Mix and match paint in line with manufacturer specifications using water-based paint systems and colour matching technology. Apply paint using modern spray equipment, ensuring a flawless and consistent finish across all vehicle types, including electric and hybrid vehicles. Carry out quality control checks to identify and rectify defects such as runs, blemishes, or inconsistencies before vehicle handover. Follow manufacturer repair methods (MRMs) and paint system guidelines to ensure compliance and durability of repairs. Use digital job cards and Bodyshop management systems (e.g., Audatex, Autoflow) to track work and maintain efficiency. Maintain a clean, safe working environment in line with Health & Safety and BSI PAS 10125 standards. Work collaboratively with Preppers, Panel Beaters, and MET Technicians to ensure efficient workflow and maximise productivity. Skills and Qualifications of a Paint Sprayer / Paint Technician Recognised qualification in Vehicle Refinishing (NVQ / IMI / City & Guilds / ATA or equivalent), with a commitment to continuous professional development. Proven experience as a Paint Sprayer / Paint Technician in a high-volume Bodyshop environment. Strong knowledge of modern paint systems, including water-based paints, colour matching, and refinishing techniques. Awareness of repairs on modern vehicle materials and finishes, including EV-specific considerations. Ability to use digital systems, paint mixing software, and workshop management tools effectively. High attention to detail, excellent time management, and a strong focus on achieving high-quality results while meeting productivity targets. If you think you are a good fit for this Paint Sprayer role, please contact UK and state reference job number 53770. Don't worry if your CV is out of date - get in touch and we can work that out later. AutoSkills UK is a leading specialist in automotive recruitment, providing both temporary and permanent staffing solutions from skilled trades through to senior management. We are always looking to connect with experienced professionals across the Bodyshop sector, including: Paint Sprayers, Preppers, Panel Beaters, MET Technicians / Strip Fitters, Vehicle Damage Assessors, Workshop Controllers, Bodyshop Quality Controllers and Bodyshop Managers.
Parts Advisors, Would you like an attractive salary package with the opportunity of earning over £34,000+ Would you like to join a stable team with a friendly work environment? Would you like to work with a great group and a terrific, LUXURY BRAND ? The Recruitment Solution are working directly with a dealer group, with one of there dealerships based in the Sidcup area. They are looking to bring someone into this varied parts role, that will expose you to all aspects of the department, allowing you to make a genuine contribution to its success. Why Apply for this Parts Advisor role? • Fantastic career opportunities, and an excellent salary! • State of the art resources and training • Company Pension • Performance Bonus • Company Benefits Scheme • Long Service Holiday Reward • Enhanced Family Planning Policy • Share Save Scheme • Your Birthday Off • You get to be a part of a prestige brand, who provide you with excellent support • Market leading £34,000+ OTE Parts Advisor Requirements • The successful candidate must have previous experience in an automotive parts environment, with good knowledge of electronic parts catalogues • You will be responsible for dealing with trade and retail customers both face to face and over the phone, and supplying parts to the workshop • You will need to have the ability to work under pressure when required • Experience working within a busy environment where you must possess a mature attitude and be a team player. Apply today sending your CV to (url removed) or call us on (phone number removed) or call Daniel directly on (phone number removed) We have many different Motor Trade Jobs available from Service Manager, Service Team Leader, Aftersales Manager, Sales Executive, General Sales Manager, Sales Manager, Business Manager, Sales Admin, Body Shop Manager, Panel Beater, Dealer Principal, Motor Mechanic, Service Advisor, Bodyshop Estimator, Paint Sprayer, Motor Cycle Technicians & Mechanics, Vehicle Technician, MET Fitter, Light Commercial Vehicle Technicians, HGV Fitters, Parts Advisor, Parts Manager, Workshop Controller, Trade Parts Representative, Fast Fit, Tyre Fitters, Warranty Administrator, Rental Advisor, Car Valetor, Collection & Delivery Drivers. Lots of Motor Trade Jobs throughout the UK. Call Us Now for Motor Trade Jobs, Working in Automotive Main Car Dealerships such as Mercedes, Audi, BMW, VW, Jaguar, Land Rover, Volvo, Bentley, Saab, Lexus, Toyota, Mazda, Ford, Peugeot, Renault, Citroen, Vauxhall, Nissan and many more.
May 19, 2026
Full time
Parts Advisors, Would you like an attractive salary package with the opportunity of earning over £34,000+ Would you like to join a stable team with a friendly work environment? Would you like to work with a great group and a terrific, LUXURY BRAND ? The Recruitment Solution are working directly with a dealer group, with one of there dealerships based in the Sidcup area. They are looking to bring someone into this varied parts role, that will expose you to all aspects of the department, allowing you to make a genuine contribution to its success. Why Apply for this Parts Advisor role? • Fantastic career opportunities, and an excellent salary! • State of the art resources and training • Company Pension • Performance Bonus • Company Benefits Scheme • Long Service Holiday Reward • Enhanced Family Planning Policy • Share Save Scheme • Your Birthday Off • You get to be a part of a prestige brand, who provide you with excellent support • Market leading £34,000+ OTE Parts Advisor Requirements • The successful candidate must have previous experience in an automotive parts environment, with good knowledge of electronic parts catalogues • You will be responsible for dealing with trade and retail customers both face to face and over the phone, and supplying parts to the workshop • You will need to have the ability to work under pressure when required • Experience working within a busy environment where you must possess a mature attitude and be a team player. Apply today sending your CV to (url removed) or call us on (phone number removed) or call Daniel directly on (phone number removed) We have many different Motor Trade Jobs available from Service Manager, Service Team Leader, Aftersales Manager, Sales Executive, General Sales Manager, Sales Manager, Business Manager, Sales Admin, Body Shop Manager, Panel Beater, Dealer Principal, Motor Mechanic, Service Advisor, Bodyshop Estimator, Paint Sprayer, Motor Cycle Technicians & Mechanics, Vehicle Technician, MET Fitter, Light Commercial Vehicle Technicians, HGV Fitters, Parts Advisor, Parts Manager, Workshop Controller, Trade Parts Representative, Fast Fit, Tyre Fitters, Warranty Administrator, Rental Advisor, Car Valetor, Collection & Delivery Drivers. Lots of Motor Trade Jobs throughout the UK. Call Us Now for Motor Trade Jobs, Working in Automotive Main Car Dealerships such as Mercedes, Audi, BMW, VW, Jaguar, Land Rover, Volvo, Bentley, Saab, Lexus, Toyota, Mazda, Ford, Peugeot, Renault, Citroen, Vauxhall, Nissan and many more.
Job Title: Senior Panel Technician / Panel Beater Location: Dunfermline Salary / Hourly Rate: £24 per hour Job Type: Full-Time, Permanent About the Role Our client, a leading business within the automotive accident repair and bodyshop sector, is looking for an experienced ATA Panel Technician / Panel Beater to join their busy workshop click apply for full job details
May 19, 2026
Full time
Job Title: Senior Panel Technician / Panel Beater Location: Dunfermline Salary / Hourly Rate: £24 per hour Job Type: Full-Time, Permanent About the Role Our client, a leading business within the automotive accident repair and bodyshop sector, is looking for an experienced ATA Panel Technician / Panel Beater to join their busy workshop click apply for full job details
Panel Beater Basic Salary: £54,600 Working Hours: Monday - Friday 7am till 5pm & 1 in 2 Saturdays Location: Harrow Talented and efficient Panel Beater to join this leading team. For this Panel Beater role, you will be repairing damaged vehicles in line with the manufacturers' specifications within a state-of-the-art Bodyshop, utilising modern equipment and techniques. Responsibilities of a Panel Beater Work efficiently in a fast-paced accident repair centre Follow the correct repair techniques and produce work in line with factory specifications and customer satisfaction Skills and Qualifications of a Panel Beater You will have served a recognised apprenticeship as a Panel Beater and gained a technical qualification (such as NVQ / VCQ / SVQ / ATA). You must have previous experience working as a Panel Beater within a busy body shop and be a strong team player with a self-motivation to earn bonus hours. You will work to the highest standard and demonstrate a sound up-to-date knowledge of vehicle repair techniques. If you think you are a good fit for this Panel Beater role, please contact Skills and state reference job number 53710 Don't worry if your CV is out of date. Get in touch and we can work that out later. As well as this Panel Beater role, Auto Skills UK is recognized as the leading provider of temporary and permanent staffing solutions, from productive trades to senior management and are always looking for candidates within the Bodyshop including: Panel Beater, Panel Technician, Vehicle Panel Beater, Bodyshop Panel Beater
May 19, 2026
Full time
Panel Beater Basic Salary: £54,600 Working Hours: Monday - Friday 7am till 5pm & 1 in 2 Saturdays Location: Harrow Talented and efficient Panel Beater to join this leading team. For this Panel Beater role, you will be repairing damaged vehicles in line with the manufacturers' specifications within a state-of-the-art Bodyshop, utilising modern equipment and techniques. Responsibilities of a Panel Beater Work efficiently in a fast-paced accident repair centre Follow the correct repair techniques and produce work in line with factory specifications and customer satisfaction Skills and Qualifications of a Panel Beater You will have served a recognised apprenticeship as a Panel Beater and gained a technical qualification (such as NVQ / VCQ / SVQ / ATA). You must have previous experience working as a Panel Beater within a busy body shop and be a strong team player with a self-motivation to earn bonus hours. You will work to the highest standard and demonstrate a sound up-to-date knowledge of vehicle repair techniques. If you think you are a good fit for this Panel Beater role, please contact Skills and state reference job number 53710 Don't worry if your CV is out of date. Get in touch and we can work that out later. As well as this Panel Beater role, Auto Skills UK is recognized as the leading provider of temporary and permanent staffing solutions, from productive trades to senior management and are always looking for candidates within the Bodyshop including: Panel Beater, Panel Technician, Vehicle Panel Beater, Bodyshop Panel Beater
Solus Accident Repair Centres
Washington, Tyne And Wear
Overview Are you looking for a position where you can make a difference, constantly learn new things and be at the forefront of technology,working aspart of the Aviva family? Responsibilities TheRole: As part of the wider Aviva family, we are looking to bring fresh thinking into our business which will support our transformation into thebodyshopof the future.We challenge traditional thinking to make us stand apart from our competitors.As such,our painters assumeresponsibilityto provide and sharetheirexpertisethroughout the site, while identifyingopportunitiesto improve ourprocessesand the service we provide to our customers Qualifications Desirable qualifications and experience; ATA accreditation Preparation and priming of a new / repaired panel to first masking stage Polishing Who are Solus? Solus, who are owned by Aviva, are one of the UK leaders in vehicle repairs, returning cars to the road in just 11 days on average and a 4.6/5 star customer rating. With an award-winning apprenticeship programme and winners of other recognised industry awards Solus are proud to be shaping the future of vehicle repair. Why Join Solus? We have so much to offer when it comes to being a Solus colleague: Competitive salary based on location, skills, experience, and qualifications. Bonus opportunity tied to your performance and the overall success of Solus. Company pension scheme with employer contributions. 33 days' holiday (including bank holidays), with the option to buy or sell up to 5 days. Save money with up to 40% discount on Aviva products and other retailer discounts. Share in Aviva's success through the Aviva Save As You Earn scheme. Supportive policies including parental and carer's leave. Wellbeing focus with tools like Group Income Protection and 24/7 GP access. At Solus, we value inclusivity and welcome all applicants. If you're excited but don't tick every box, we encourage you to apply-your unique skills might be just what we need. We guarantee an interview for disabled applicants meeting the minimum criteria-just email us after applying to let us know. Ready to join us? Apply online today, and our team will be in touch within 14 days.
May 19, 2026
Full time
Overview Are you looking for a position where you can make a difference, constantly learn new things and be at the forefront of technology,working aspart of the Aviva family? Responsibilities TheRole: As part of the wider Aviva family, we are looking to bring fresh thinking into our business which will support our transformation into thebodyshopof the future.We challenge traditional thinking to make us stand apart from our competitors.As such,our painters assumeresponsibilityto provide and sharetheirexpertisethroughout the site, while identifyingopportunitiesto improve ourprocessesand the service we provide to our customers Qualifications Desirable qualifications and experience; ATA accreditation Preparation and priming of a new / repaired panel to first masking stage Polishing Who are Solus? Solus, who are owned by Aviva, are one of the UK leaders in vehicle repairs, returning cars to the road in just 11 days on average and a 4.6/5 star customer rating. With an award-winning apprenticeship programme and winners of other recognised industry awards Solus are proud to be shaping the future of vehicle repair. Why Join Solus? We have so much to offer when it comes to being a Solus colleague: Competitive salary based on location, skills, experience, and qualifications. Bonus opportunity tied to your performance and the overall success of Solus. Company pension scheme with employer contributions. 33 days' holiday (including bank holidays), with the option to buy or sell up to 5 days. Save money with up to 40% discount on Aviva products and other retailer discounts. Share in Aviva's success through the Aviva Save As You Earn scheme. Supportive policies including parental and carer's leave. Wellbeing focus with tools like Group Income Protection and 24/7 GP access. At Solus, we value inclusivity and welcome all applicants. If you're excited but don't tick every box, we encourage you to apply-your unique skills might be just what we need. We guarantee an interview for disabled applicants meeting the minimum criteria-just email us after applying to let us know. Ready to join us? Apply online today, and our team will be in touch within 14 days.
Panel Beater Stoke On Trent Up to 55,000 base salary Monday to Friday - No Weekends Permanent position, 42.5 Hours a week, Pension, Healthcare, 33 Days annual leave, perkbox, medical care plan, Immaculate ARC, Latest equipment Consistent flow of repairs For more information, please call Rochelle on:(phone number removed) ATA or Level 3 Panel Beater We currently have a fantastic opportunity for an experienced Panel Beater from either body shop or Accident repair background, to join a growing accident repair group. The site is performing really well, and they have a very stable team of technicians. This job role is a Skilled Panel Beater's position and requires an experienced candidate who can complete all panel repairs to accident damaged vehicles. ATA, NVQ 3 or IMI 3 qualifications would be a distinct advantage. The Job: Panel Beater To repair or replace as necessary bodywork panels of damaged vehicles according to the instructions received or details on the job card. This will include chassis and framework. Stripping and fitting panels and bodywork You will be required to efficiently repair vehicles checking on completion ensuring there are no defects including changing quarter panels, filler work, stripping a vehicle down and rebuilding it. Panel straightening and filler to repair dents Replacement of panels Welding and bonding of vehicle structure Removing & replacing complete body shell Adhere to the manufacturer's literature and modification bulletins as appropriate to the repair and to the replacement of chassis and panel work. To ensure that all equipment used, to include jigs, fixtures and welding equipment, is operated in accordance with defined safety requirements. The role is to carry out all panel beater repair work on all makes of vehicles and to be able demonstrate a full range of vehicle body repairs including jig work. Repair and replace body components to damaged vehicles to pre-accident condition and to Kitemark BS10125 and manufacturer's standards Job Experience - Panel Beater A working and demonstrable knowledge of vehicle panel repairs Relevant panel qualifications - IMI 3, NVQ 3 or ATA Panel Beater Accreditation desirable but not essential Panel beater Experience is required A working knowledge of H&S responsibilities Manufacturer experience is desirable. IND123 If you would like to be considered for the Panel Beater job role, please call Rochelle on: (phone number removed) or email your CV for an immediate interview Clear Automotive Recruitment Solutions is a leading Automotive recruitment specialist covering all areas of the UK. We are also looking for candidates with the following skill sets: Panel Beater, Panel Technician, MET Technician, Bodyshop Mechanic, Vehicle Painter, Vehicle Paint Sprayer, Vehicle Prepper, Paint Prepper, Bodyshop Technicians, Accident repair, Vehicle body repair, coach builder, VDA, Vehicle Damage Assessor, Bodyshop Estimator, Production Manager, Vehicle Technician, Workshop Controller, Bodyshop Controller, SMART Repairer and Bodyshop Manager, Regional and General Manager, Service Advisor, Service Manager, Parts Advisor, Parts Manager and more.
May 19, 2026
Full time
Panel Beater Stoke On Trent Up to 55,000 base salary Monday to Friday - No Weekends Permanent position, 42.5 Hours a week, Pension, Healthcare, 33 Days annual leave, perkbox, medical care plan, Immaculate ARC, Latest equipment Consistent flow of repairs For more information, please call Rochelle on:(phone number removed) ATA or Level 3 Panel Beater We currently have a fantastic opportunity for an experienced Panel Beater from either body shop or Accident repair background, to join a growing accident repair group. The site is performing really well, and they have a very stable team of technicians. This job role is a Skilled Panel Beater's position and requires an experienced candidate who can complete all panel repairs to accident damaged vehicles. ATA, NVQ 3 or IMI 3 qualifications would be a distinct advantage. The Job: Panel Beater To repair or replace as necessary bodywork panels of damaged vehicles according to the instructions received or details on the job card. This will include chassis and framework. Stripping and fitting panels and bodywork You will be required to efficiently repair vehicles checking on completion ensuring there are no defects including changing quarter panels, filler work, stripping a vehicle down and rebuilding it. Panel straightening and filler to repair dents Replacement of panels Welding and bonding of vehicle structure Removing & replacing complete body shell Adhere to the manufacturer's literature and modification bulletins as appropriate to the repair and to the replacement of chassis and panel work. To ensure that all equipment used, to include jigs, fixtures and welding equipment, is operated in accordance with defined safety requirements. The role is to carry out all panel beater repair work on all makes of vehicles and to be able demonstrate a full range of vehicle body repairs including jig work. Repair and replace body components to damaged vehicles to pre-accident condition and to Kitemark BS10125 and manufacturer's standards Job Experience - Panel Beater A working and demonstrable knowledge of vehicle panel repairs Relevant panel qualifications - IMI 3, NVQ 3 or ATA Panel Beater Accreditation desirable but not essential Panel beater Experience is required A working knowledge of H&S responsibilities Manufacturer experience is desirable. IND123 If you would like to be considered for the Panel Beater job role, please call Rochelle on: (phone number removed) or email your CV for an immediate interview Clear Automotive Recruitment Solutions is a leading Automotive recruitment specialist covering all areas of the UK. We are also looking for candidates with the following skill sets: Panel Beater, Panel Technician, MET Technician, Bodyshop Mechanic, Vehicle Painter, Vehicle Paint Sprayer, Vehicle Prepper, Paint Prepper, Bodyshop Technicians, Accident repair, Vehicle body repair, coach builder, VDA, Vehicle Damage Assessor, Bodyshop Estimator, Production Manager, Vehicle Technician, Workshop Controller, Bodyshop Controller, SMART Repairer and Bodyshop Manager, Regional and General Manager, Service Advisor, Service Manager, Parts Advisor, Parts Manager and more.
Panel Beater Location: Manchester Annual Salary: Up to £54,000 Hours: 42.5 hours per week, Monday to Friday Extras: 30 Days holiday, Achievable bonus worth over £10K, Flexible working hours Our client is looking for a talented and efficient Panel Beater / Panel Technician with a valid ATA or NVQ equivalent to join their leading team. You'll be repairing damaged vehicles in line with manufacturer specifications in a state-of-the-art bodyshop, using the latest tools and techniques. Responsibilities for a Panel Beater / Panel Technician: Work efficiently in a fast-paced accident repair centre Follow correct repair techniques and factory specifications Remove damaged panels and parts, and repair or replace them Use welding equipment, hand tools, and power tools to reshape and fit panels Smooth out dents and minor imperfections using fillers and sanders Align body parts accurately for assembly and fitting Collaborate with other technicians to ensure timely completion of repairs Maintain a clean, safe, and organised working environment Stay up to date with the latest repair standards and industry developments Skills and Qualifications for a Panel Beater / Panel Technician: Recognised apprenticeship and technical qualification (NVQ, VCQ, SVQ, or ATA) Previous experience in a busy bodyshop environment as a Panel Beater / Panel Technician Strong team player with motivation to achieve bonus hours Sound and current knowledge of crash repair techniques for both heavy and light damage Click 'Apply Now' to take the next step in your career. INDHW
May 18, 2026
Full time
Panel Beater Location: Manchester Annual Salary: Up to £54,000 Hours: 42.5 hours per week, Monday to Friday Extras: 30 Days holiday, Achievable bonus worth over £10K, Flexible working hours Our client is looking for a talented and efficient Panel Beater / Panel Technician with a valid ATA or NVQ equivalent to join their leading team. You'll be repairing damaged vehicles in line with manufacturer specifications in a state-of-the-art bodyshop, using the latest tools and techniques. Responsibilities for a Panel Beater / Panel Technician: Work efficiently in a fast-paced accident repair centre Follow correct repair techniques and factory specifications Remove damaged panels and parts, and repair or replace them Use welding equipment, hand tools, and power tools to reshape and fit panels Smooth out dents and minor imperfections using fillers and sanders Align body parts accurately for assembly and fitting Collaborate with other technicians to ensure timely completion of repairs Maintain a clean, safe, and organised working environment Stay up to date with the latest repair standards and industry developments Skills and Qualifications for a Panel Beater / Panel Technician: Recognised apprenticeship and technical qualification (NVQ, VCQ, SVQ, or ATA) Previous experience in a busy bodyshop environment as a Panel Beater / Panel Technician Strong team player with motivation to achieve bonus hours Sound and current knowledge of crash repair techniques for both heavy and light damage Click 'Apply Now' to take the next step in your career. INDHW
Panel Beater Location: Yeovil Annual Salary: Up to £52,000 Hours: 42.5 Hour Working Week Extras: Achievable Bonus, Flexible Start times, Additional Training and more Our client is looking for a talented and efficient Panel Beater / Panel Technician with a valid ATA or NVQ equivalent to join this leading team. You will be repairing damaged vehicles in line with the manufacturers' specifications within a state-of-the-art Bodyshop, utilising modern equipment and techniques. Responsibilities for Panel Beater / Panel Technician / Car Body Repair Technician: Work efficiently in a fast-paced accident repair centre Follow the correct repair techniques and produce work in line with factory specifications and customer satisfaction Remove damaged panels and parts, and repair or replace them Use welding equipment, hand tools, and power tools to reshape and fit panels Smooth out dents and small imperfections using fillers and sanders Align body parts for assembly and fit Work collaboratively with other team members to ensure timely completion of repairs Maintain a clean and safe working environment Keep up-to-date with industry standards and techniques Skills and Qualifications for Panel Beater / Panel Technician / Car Body Repair Technician: You will have served a recognised apprenticeship as a Panel Beater / Panel Technician / Car Body Repair Technician and gained a technical qualification (such as NVQ / VCQ / SVQ / ATA) You must have previous experience working as a Panel Beater / Panel Technician / Car Body Repair Technician within a busy body shop and be a strong team player with a self-motivation to earn bonus hours You will work to the highest standard and demonstrate a sound up-to-date knowledge of vehicle repair techniques with both heavy and minor crash repair. Click 'Apply Now' to take the next step in your career. INDLP
May 18, 2026
Full time
Panel Beater Location: Yeovil Annual Salary: Up to £52,000 Hours: 42.5 Hour Working Week Extras: Achievable Bonus, Flexible Start times, Additional Training and more Our client is looking for a talented and efficient Panel Beater / Panel Technician with a valid ATA or NVQ equivalent to join this leading team. You will be repairing damaged vehicles in line with the manufacturers' specifications within a state-of-the-art Bodyshop, utilising modern equipment and techniques. Responsibilities for Panel Beater / Panel Technician / Car Body Repair Technician: Work efficiently in a fast-paced accident repair centre Follow the correct repair techniques and produce work in line with factory specifications and customer satisfaction Remove damaged panels and parts, and repair or replace them Use welding equipment, hand tools, and power tools to reshape and fit panels Smooth out dents and small imperfections using fillers and sanders Align body parts for assembly and fit Work collaboratively with other team members to ensure timely completion of repairs Maintain a clean and safe working environment Keep up-to-date with industry standards and techniques Skills and Qualifications for Panel Beater / Panel Technician / Car Body Repair Technician: You will have served a recognised apprenticeship as a Panel Beater / Panel Technician / Car Body Repair Technician and gained a technical qualification (such as NVQ / VCQ / SVQ / ATA) You must have previous experience working as a Panel Beater / Panel Technician / Car Body Repair Technician within a busy body shop and be a strong team player with a self-motivation to earn bonus hours You will work to the highest standard and demonstrate a sound up-to-date knowledge of vehicle repair techniques with both heavy and minor crash repair. Click 'Apply Now' to take the next step in your career. INDLP
Panel Beater Location: Harrow Annual Salary: Up to £55,000 per year Hours: Monday to Friday 45h week Join a state-of-the-art Bodyshop as a skilled and experienced Panel Beater / Panel Technician . This role is perfect for someone with ATA accreditation or NVQ Level 3 (or equivalent) who thrives in a fast-paced accident repair centre. You will be responsible for repairing damaged vehicles to manufacturer specifications using the latest tools and techniques. Key Responsibilities for Panel Beater / Panel Technician: Perform high-quality accident repairs, ensuring work meets manufacturer and customer standards Remove, repair, and replace damaged panels Use welding equipment, dent pullers, and filler techniques for panel repairs Align body panels and parts for assembly and ensure a perfect fit Work efficiently within a team to meet deadlines and production targets Maintain a clean, safe, and organized work environment Stay up to date with modern vehicle repair techniques and industry standards Skills and Qualifications for Panel Beater / Panel Technician: Recognised apprenticeship in Panel Beating or Vehicle Body Repair NVQ Level 3 / VCQ / SVQ / ATA accreditation or equivalent qualification Previous experience working as a Panel Beater / Panel Technician in a busy body shop Strong knowledge of modern repair techniques for minor and moderate crash repair Ability to work efficiently under pressure while maintaining high standards Self-motivated team player with a focus on customer satisfaction and bonus targets Click 'Apply Now' to take the next step in your career. INDLP
May 18, 2026
Full time
Panel Beater Location: Harrow Annual Salary: Up to £55,000 per year Hours: Monday to Friday 45h week Join a state-of-the-art Bodyshop as a skilled and experienced Panel Beater / Panel Technician . This role is perfect for someone with ATA accreditation or NVQ Level 3 (or equivalent) who thrives in a fast-paced accident repair centre. You will be responsible for repairing damaged vehicles to manufacturer specifications using the latest tools and techniques. Key Responsibilities for Panel Beater / Panel Technician: Perform high-quality accident repairs, ensuring work meets manufacturer and customer standards Remove, repair, and replace damaged panels Use welding equipment, dent pullers, and filler techniques for panel repairs Align body panels and parts for assembly and ensure a perfect fit Work efficiently within a team to meet deadlines and production targets Maintain a clean, safe, and organized work environment Stay up to date with modern vehicle repair techniques and industry standards Skills and Qualifications for Panel Beater / Panel Technician: Recognised apprenticeship in Panel Beating or Vehicle Body Repair NVQ Level 3 / VCQ / SVQ / ATA accreditation or equivalent qualification Previous experience working as a Panel Beater / Panel Technician in a busy body shop Strong knowledge of modern repair techniques for minor and moderate crash repair Ability to work efficiently under pressure while maintaining high standards Self-motivated team player with a focus on customer satisfaction and bonus targets Click 'Apply Now' to take the next step in your career. INDLP
Panel Beater Location: Harrow Annual Salary: Up to £55,000 per year Hours: Monday to Friday 45h week Benefits: 33 Days Holiday, Paid Breaks, Health care and insurance discounts and many more Join a state-of-the-art Bodyshop as a skilled and experienced Panel Beater / Panel Technician . This role is perfect for someone with ATA accreditation or NVQ Level 3 (or equivalent) who thrives in a fast-paced accident repair centre. You will be responsible for repairing damaged vehicles to manufacturer specifications using the latest tools and techniques. Key Responsibilities for Panel Beater / Panel Technician: Perform high-quality accident repairs, ensuring work meets manufacturer and customer standards Remove, repair, and replace damaged panels Use welding equipment, dent pullers, and filler techniques for panel repairs Align body panels and parts for assembly and ensure a perfect fit Work efficiently within a team to meet deadlines and production targets Maintain a clean, safe, and organized work environment Stay up to date with modern vehicle repair techniques and industry standards Skills and Qualifications for Panel Beater / Panel Technician: Recognised apprenticeship in Panel Beating or Vehicle Body Repair NVQ Level 3 / VCQ / SVQ / ATA accreditation or equivalent qualification Previous experience working as a Panel Beater / Panel Technician in a busy body shop Strong knowledge of modern repair techniques for minor and moderate crash repair Ability to work efficiently under pressure while maintaining high standards Self-motivated team player with a focus on customer satisfaction and bonus targets Click 'Apply Now' to take the next step in your career. INDLP
May 18, 2026
Full time
Panel Beater Location: Harrow Annual Salary: Up to £55,000 per year Hours: Monday to Friday 45h week Benefits: 33 Days Holiday, Paid Breaks, Health care and insurance discounts and many more Join a state-of-the-art Bodyshop as a skilled and experienced Panel Beater / Panel Technician . This role is perfect for someone with ATA accreditation or NVQ Level 3 (or equivalent) who thrives in a fast-paced accident repair centre. You will be responsible for repairing damaged vehicles to manufacturer specifications using the latest tools and techniques. Key Responsibilities for Panel Beater / Panel Technician: Perform high-quality accident repairs, ensuring work meets manufacturer and customer standards Remove, repair, and replace damaged panels Use welding equipment, dent pullers, and filler techniques for panel repairs Align body panels and parts for assembly and ensure a perfect fit Work efficiently within a team to meet deadlines and production targets Maintain a clean, safe, and organized work environment Stay up to date with modern vehicle repair techniques and industry standards Skills and Qualifications for Panel Beater / Panel Technician: Recognised apprenticeship in Panel Beating or Vehicle Body Repair NVQ Level 3 / VCQ / SVQ / ATA accreditation or equivalent qualification Previous experience working as a Panel Beater / Panel Technician in a busy body shop Strong knowledge of modern repair techniques for minor and moderate crash repair Ability to work efficiently under pressure while maintaining high standards Self-motivated team player with a focus on customer satisfaction and bonus targets Click 'Apply Now' to take the next step in your career. INDLP
Panel Beater Location: Basingstoke Basic Salary: up to £55,000 + Time Saved Bonus (£300/£400) a Mouth Hours: 07:30am - 17:00pm (Monday - Friday) Benefits: 33 Days Holiday, Staff benefits and incentives and many more Our client is looking for a skilled and experienced Panel Beater / Panel Technician . This role is perfect for someone with ATA accreditation or NVQ Level 3 (or equivalent) who thrives in a fast-paced accident repair centre. You will be responsible for repairing damaged vehicles to manufacturer specifications using the latest tools and techniques. Key Responsibilities for Panel Beater / Panel Technician: Perform high-quality accident repairs, ensuring work meets manufacturer and customer standards Remove, repair, and replace damaged panels Use welding equipment, dent pullers, and filler techniques for panel repairs Align body panels and parts for assembly and ensure a perfect fit Work efficiently within a team to meet deadlines and production targets Maintain a clean, safe, and organized work environment Stay up to date with modern vehicle repair techniques and industry standards Skills and Qualifications for Panel Beater / Panel Technician: (Ideally not Essential) Recognised apprenticeship in Panel Beating or Vehicle Body Repair NVQ Level 3 / VCQ / SVQ / ATA accreditation or equivalent qualification Previous experience working as a Panel Beater / Panel Technician in a busy body shop Strong knowledge of modern repair techniques for minor and moderate crash repair Ability to work efficiently under pressure while maintaining high standards Manufacturer Approved / Insurance and Fleet. Self-motivated team player with a focus on customer satisfaction and bonus targets Click 'Apply Now' to take the next step in your career. INDBS
May 18, 2026
Full time
Panel Beater Location: Basingstoke Basic Salary: up to £55,000 + Time Saved Bonus (£300/£400) a Mouth Hours: 07:30am - 17:00pm (Monday - Friday) Benefits: 33 Days Holiday, Staff benefits and incentives and many more Our client is looking for a skilled and experienced Panel Beater / Panel Technician . This role is perfect for someone with ATA accreditation or NVQ Level 3 (or equivalent) who thrives in a fast-paced accident repair centre. You will be responsible for repairing damaged vehicles to manufacturer specifications using the latest tools and techniques. Key Responsibilities for Panel Beater / Panel Technician: Perform high-quality accident repairs, ensuring work meets manufacturer and customer standards Remove, repair, and replace damaged panels Use welding equipment, dent pullers, and filler techniques for panel repairs Align body panels and parts for assembly and ensure a perfect fit Work efficiently within a team to meet deadlines and production targets Maintain a clean, safe, and organized work environment Stay up to date with modern vehicle repair techniques and industry standards Skills and Qualifications for Panel Beater / Panel Technician: (Ideally not Essential) Recognised apprenticeship in Panel Beating or Vehicle Body Repair NVQ Level 3 / VCQ / SVQ / ATA accreditation or equivalent qualification Previous experience working as a Panel Beater / Panel Technician in a busy body shop Strong knowledge of modern repair techniques for minor and moderate crash repair Ability to work efficiently under pressure while maintaining high standards Manufacturer Approved / Insurance and Fleet. Self-motivated team player with a focus on customer satisfaction and bonus targets Click 'Apply Now' to take the next step in your career. INDBS
