169 jobs found

Systems Engineer (engineer / senior) £40,000 - 65,000 + benefits Uttoxeter area, Staffordshire - 5 days onsite Multiple roles exist for systems engineers to join a successful construction machinery manufacturing company in Staffordshire. The roles are open to engineer and senior engineer candidates. Purpose: To develop and deliver electrical and control systems for a range of hydraulic construction machine platforms. This will entail definition of systems requirements and creation of technical specifications encompassing hardware and software elements. You will work with design and development teams to create solutions, support vehicle integration, test and validation activities. This is an end-to-end systems engineering role and you will take systems from concept to production. Background: Systems Engineer It is most likely you will have a background in electrical or electronic engineering. You will have a broad range of skills and experience allowing you to contribute to all aspects of product develop and integration activities (e.g. systems definition, integration, physical troubleshooting and problem solving) - versatility and flexibility. A small company, "many hats" approach to engineering would align best to this working environment. The ideal candidate will come from a design, development, integration or validation background but must have the ability to develop systems requirements for electrical and control systems (e.g. logic circuits, ECUs and electrical distribution system / EDS). An understanding of software control would be very useful. The role could involve handling any aspect of electrical and control systems for the machine, from driver controls and interfaces, through to hydraulics, powertrain integration, active / passive safety systems and more. Skills / Experience required: Systems Engineer A good degree in a relevant subject (e.g. electrical engineering, mechatronics engineering) At least 2 years of relevant experience in the design, development, integration or validation of electrical and control systems (e.g. schematics and harnesses for low voltage DC systems (e.g. 12v, 24v), hydraulic / pneumatic control utilising electronic control units (ECUs), etc) Experience in the design of electrical distribution systems or electronic control systems for agricultural machines, construction machinery, automotive systems, off-highway vehicles (e.g. military vehicles) or complex machinery / mechatronic systems. Demonstrable capability and aptitude for systems definition and creation of technical specifications relating to electrical / electronic control. Good knowledge of electrical engineering fundamentals (e.g. electrical load calculations and circuit theory) coupled with good problem solving skills (8D, FMEA, etc) Experience of high reliability design taking into consideration water ingress, vibration, heat, impact, etc would be ideal Good communication skills and the ability to work effectively in a small team environment NOTE : Aptitude and attitude is more important that specific product knowledge but candidates must be versatile, practical and be able to apply the basics to any given situation effectively. These systems engineer roles are based onsite near Uttoxeter. Hybrid working is not supported. It is commutable from Rocester, Rugeley, Crewe, Stafford, Derby, Birmingham, Stoke-on Trent, Lichfield, Macclesfield and Burton-on-Trent.

Senior Test Solutions Engineer - 1760 Onsite in Basildon Intially until 27/01/27 (might be extended) 60ph, UMB inside IR35 SC required, can start on BPSS clearance Our client, a leading name in the Defence & Security sector, is currently seeking a Senior Test Solutions Engineer to join their team on a contract basis in Basildon. This role involves supporting the design, development, and ongoing support of electro-optical test equipment and test processes for Leonardo's range of Precision Guidance products, through the development to production stages. Key Responsibilities: Interpreting product-level test requirements to support the definition and implementation of test strategies and systems Supporting the design and commissioning of test systems used in development and production Participating in the integration, verification, and validation of test solutions Performing hands-on laboratory testing and measurement using electro-optical instrumentation Writing and reviewing technical documentation including test procedures and user instructions Working closely with cross-disciplinary teams (hardware, software, optical and systems engineers) to ensure successful product and test system delivery Job Requirements: HND or higher qualification in System, Electrical, Electronic, or related engineering discipline Experience in one or more of the following areas: Electrical testing, Electro-optics, Environmental testing, acoustic testing Practical experience with lab-based testing, diagnostics, and measurement Good understanding of test instrumentation and data analysis Ability to follow and contribute to structured engineering processes Strong attention to detail and good organisational skills Good written and verbal communication skills A collaborative approach and the ability to work effectively within a team Desirable: Experience with test software tools (e.g. LabVIEW, MATLAB or similar) Soldering Experience Knowledge of mechanical design and STTE Understanding and knowledge of using industry standard ECAD tools Awareness of environmental effects on hardware performance This position offers an excellent opportunity to work on exciting projects within the defence and security industry. If you are a qualified and experienced engineer looking for an engaging contract role, we would love to hear from you. Apply now to join our client's dynamic team in Basildon.

Job Title: Embedded Software Engineer Location: Edinburgh (Hybrid) Salary: Up to £55k (DOE) We re looking for a talented and motivated Embedded Software Engineer to join a multi-disciplinary engineering team. This is an exciting opportunity to design, implement, and test embedded software across a range of microcontrollers, microprocessors, and Linux-based systems, contributing to innovative products and solutions. About the Role Design, develop, test, and maintain embedded software using C/C++. Develop software for microcontrollers and microprocessors, including PIC and STM32 series, as well as embedded Linux systems. Work with Linux kernels, bootloaders, device drivers and Board Support Packages (BSPs). Use Linux build systems such as Yocto to create custom Linux distributions. Collaborate with hardware engineers on new hardware bring-up and debugging hardware/software interfaces. Implement and troubleshoot hardware communication protocols including UART, SPI, I2C and Ethernet. Use hardware debugging tools including oscilloscopes and logic analysers. Develop software supporting TCP/IP and UDP network protocols. Apply an understanding of basic network security concepts to embedded systems. About You Degree in Computer Science, Electrical/Electronic Engineering or a related discipline. 5+ years' experience in embedded software development. Strong proficiency in C/C++ for embedded systems. Hands-on experience developing embedded software for microcontrollers and/or microprocessors. Strong experience with embedded Linux, including kernel, Bootloaders, Device drivers, BSPs, and User interface engines Familiarity with Linux build systems such as Yocto. Good understanding of digital and analogue circuits and hardware principles. Experience using hardware debugging tools such as oscilloscopes and logic analysers. Experience with hardware communication protocols including UART, SPI, I2C and Ethernet. Understanding of TCP/IP and UDP network protocols. Excellent problem-solving skills and the ability to work independently as well as within a small, collaborative engineering team. Desirable Skills Experience with real-time operating systems (RTOS). Experience with IoT protocols, including MQTT over GSM (5G/4G/2G). Familiarity with version control tools such as Git. Please note, we cannot offer sponsorship for this role. If interested, please send over an updated CV.

Job Title: Monitoring Systems Engineer Location: Cambridge Salary: Competitive Job type: Permanent, Full-time About the Organisation: MISTRAS Group is a leading global provider of asset protection solutions, helping organisations maximise the safety, reliability and performance of their critical assets. Through a combination of inspection, engineering, testing, monitoring and data-driven solutions, MISTRAS supports customers across industries including energy, oil and gas, power generation, infrastructure, aerospace and manufacturing. With a strong focus on innovation, safety and operational excellence, MISTRAS helps clients reduce risk, ensure compliance and extend the life of their assets. About the Role: The Monitoring Systems Engineer is responsible for supporting the delivery of technically advanced Structural Health Monitoring (SHM) and remote monitoring solutions across infrastructure, industrial and energy sector projects. This role combines hands-on engineering with technical problem-solving, enabling the successful deployment, commissioning and operation of monitoring systems that generate valuable real-time data and insights for customers. Working with advanced sensing technologies and data acquisition systems, you will play a key role throughout the project lifecycle, from mobilisation and installation through to data delivery and long-term remote monitoring. This position offers an excellent opportunity to develop specialist expertise within a growing area of engineering, with a clear pathway onto opportunities into Technical Specialist or Project Management roles within a global engineering organisation. Key Responsibilities: Project Delivery and Technical Support: Support the successful delivery of monitoring projects from mobilisation through to commissioning. Act as a technical lead on site during the installation, configuration and commissioning of monitoring systems. Deploy, configure and test sensors, data acquisition hardware, communications equipment and monitoring technologies. Verify system functionality, performance and data integrity prior to transition into live monitoring. Support the integration of monitoring systems into remote monitoring and data delivery platforms. Assist with troubleshooting, fault diagnosis and resolution of technical issues during installation and commissioning activities. Engineering and Technical Excellence: Produce and maintain technical documentation, installation records, commissioning reports and project documentation. Contribute to the development and continuous improvement of monitoring system installation and commissioning procedures. Support project planning activities, including equipment preparation, mobilisation and site coordination. Provide technical support and guidance to Monitoring Systems Technicians and other project team members where required. Health, Safety, Quality and Compliance Carry out all activities in accordance with company Quality, Health, Safety and Environmental (QHSE) policies and procedures. Demonstrate a strong commitment to safe working practices and regulatory compliance. Ensure risk assessments, method statements and quality documentation are completed and maintained as required. Work safely in a variety of environments, including industrial facilities, infrastructure assets, confined spaces and working at height locations where appropriately trained. Travel and Site-Based Working Travel to project locations throughout the UK and internationally as required. Support site-based installation and commissioning activities, typically involving planned periods of less than two weeks away from home. About You: Requirements: Strong interest in engineering technology, monitoring solutions and real-world asset performance. Experience supporting technical projects within site-based or field environments. Basic understanding of IT networks, communications systems and connected technologies. Knowledge of site health and safety principles and safe working practices. Awareness of CDM regulations and construction or engineering project environments. Ability to manage multiple priorities and workstreams effectively. Strong organisational and problem-solving skills with excellent attention to detail. Experience producing technical reports, installation records or project documentation would be advantageous. Ability to work independently while also contributing effectively as part of a wider engineering team. Strong communication skills with the ability to engage professionally with customers, suppliers and colleagues. Desire to develop specialist technical expertise and build a long-term engineering career within monitoring systems. Qualifications: Full UK driving licence with no more than three current penalty points. CSCS, CCNSG, GWO, Working at Height or Confined Space qualifications would be advantageous but are not essential. Relevant engineering, instrumentation, electronics or technical qualifications would be beneficial. Why Join Us? This is an outstanding opportunity to be part of a specialist engineering team delivering innovative monitoring solutions for critical infrastructure, industrial facilities and energy assets. You will work with advanced sensing technologies and data-driven monitoring systems that provide valuable insights into asset performance and structural integrity. With a clear progression pathway into Technical Specialist and Project Management positions, this role offers excellent opportunities for career growth and professional development. How to Apply? Please click the APPLY button to submit your CV and Covering Letter for this role. Candidates with experience as a Monitoring Engineer, Instrumentation Engineer, Field Engineer, Structural Health Monitoring Engineer, Data Acquisition Engineer, Electrical Engineer, Electronics Engineer, Systems Engineer, Commissioning Engineer, Technical Engineer or Project Engineer may also be considered for this role.

Our client, is a specialist provider of monitoring solutions used across critical industries worldwide including nuclear, oil & gas, marine and renewables. Their innovative monitoring systems provide real-time insight into asset performance, helping customers improve safety, manage risk and maintain reliable operations. Due to continued growth, they're looking to appoint a Commissioning Engineer to join their team based in Cowes, Isle of Wight. This is a hands-on role offering regular UK and international travel, working on cutting-edge monitoring systems across a variety of engineering environments. The Role As a Commissioning Engineer, you will be responsible for ensuring monitoring systems are successfully installed, configured, tested and handed over to customers. This role is based in Cowes on the Isle of Wight where the client have manufacturing facilities. Whilst here you'll be involved with testing and commissioning of equipment, whilst preparing for UK and international trips to client sites. These sites include a variety of different land based locations and facilities as well as offshore installations. All required training and certification for the role will be provided by the client, but experience of working away often in challenging environments would be advantageous. Key responsibilities include: Commissioning and acceptance testing of monitoring systems both in-house and on customer sites Configuring hardware, software, sensors and data acquisition systems Calibrating and validating load, strain and structural monitoring equipment Diagnosing and resolving technical faults during commissioning activities Producing commissioning reports, documentation and handover packs Supporting installation and project delivery teams Ensuring all equipment meets quality, safety and customer requirements Representing the business professionally while working on customer sites About You We're keen to speak with individuals who have: Essential Requirements Engineering qualification (Apprenticeship, HNC, HND or equivalent experience) Electrical engineering background Understanding of industrial electronics, instrumentation or automation systems Strong fault-finding and troubleshooting abilities Good communication and customer-facing skills Ability to work independently and manage workload effectively Willingness to travel throughout the UK and internationally Comfortable working at height and within confined spaces when required Desirable Experience Commissioning of industrial systems Instrumentation and monitoring equipment Data acquisition systems Structural monitoring, load monitoring or sensor-based technologies Site installation and testing activities

PE Global is currently recruiting for an experienced Senior System Engineer to join our client based in Cambourne, UK. The role is an initial 24-month contract and the rate for this role is 31 PAYE p/hour or 41.90 Umbrella p/hour. Key Responsibilities - Define and manage System, Hardware, Embedded, ATE, Software and Integration requirements throughout the product lifecycle. - Contribute to the design and development of multidisciplinary connected device and IoT solutions. - Define technical protocols and support system architecture and integration activities. - Lead technical workstreams within multidisciplinary R&D projects. - Provide technical problem solving and develop proof-of-concept solutions to address complex engineering challenges. - Support the design and execution of testing, investigations and field testing activities. - Work closely with System Engineers, Embedded Software Developers, Hardware Engineers, Integration Engineers and Backend and Frontend teams. - Work within a Product and Platform team to deliver solutions that are valuable, viable, usable and technically feasible. - Support the development and delivery of connected device products from discovery through to delivery. Requirements - BSc/MSc in Electrical Engineering or a related discipline. - Minimum of 5 years' experience in Systems Engineering within multidisciplinary systems. - Experience working with communication products, embedded systems, hardware and RF systems. - Strong understanding of complex IoT systems and connected devices. - Experience working on complex multidisciplinary engineering projects. - Strong problem-solving skills with the ability to assess technical challenges and compare alternative solutions. - Excellent communication and teamwork skills. - Strong organisational skills and the ability to work within a structured process environment. - A hands-on approach with a strong interest in learning and innovation. - Experience with Linux, Atlassian or Azure DevOps would be advantageous. - Coding experience in C, C#, Java or Python would be advantageous. - Experience with RF communication technologies such as BLE, Wi-Fi, LTE-M or LoRa would be advantageous. - Knowledge of backend systems, serverless solutions and cloud-based infrastructure for IoT devices would be advantageous. Additional Information - Hybrid working with a minimum of 2 days per week onsite in Cambourne. - Some travel may be required depending on project requirements. - The interview process will involve multiple stages, including CV review, technical interviews and a team-fit interview. - Interviews may be conducted both online and onsite Although it is not possible for us to respond to all applications, we at PE Global will do our upmost to give you feedback on your application. You have sent your Cv into us as a company and even though you have sent your CV to a particular position, we are making the reasonable assumption that you are active on the job market and as part of our normal recruitment service we will discuss other suitable positions with you. You are free to opt out of this so please specify in your application to us if you just want to be contacted in relation to a specific vacancy. Your Cv is sent to a central recruitment inbox which a number of people in the applicable PE Global division have access to and so this means that you might not be contacted by the named person in this advert.

An exciting opportunity has arisen for a Principal Test Development Engineer to join a leading technology and engineering organisation specialising in secure communications, advanced electronics, and mission-critical systems. This role offers the chance to work on innovative products that support highly secure environments, contributing to the development of advanced test solutions for complex electronic systems throughout the product lifecycle. You will play a key role in designing, developing and supporting automated test equipment for both new and existing products. The Role As a Principal Test Development Engineer, you will be responsible for the design, implementation, and ongoing support of test solutions used during product development, qualification, and production. You will collaborate closely with multidisciplinary engineering teams to ensure products are designed with testability in mind and that robust, cost-effective test strategies are implemented. Key Responsibilities Provide development estimates, costs, and lead times for test equipment during bid and proposal activities. Lead Design-for-Test reviews and contribute to product development activities to ensure effective test coverage. Define and develop efficient, reliable, and cost-effective production and qualification test solutions. Design test equipment and generate supporting manufacturing and technical documentation. Support the build and integration of test systems. Develop test software and firmware for automated test environments. Commission and validate test systems, including calibration procedures where required. Produce clear test specifications, operating instructions, and technical documentation. Work closely with software, hardware, and systems engineering teams to define interface and communication requirements. Maintain, troubleshoot, and enhance legacy test equipment and associated infrastructure. Ensure adherence to information security and handling procedures. Required Skills & Experience Strong experience developing automated test solutions using National Instruments TestStand, CVI, and/or LabVIEW. Solid programming experience in C. Experience creating basic mechanical drawings to support test equipment design. Knowledge of electrical schematics, wiring diagrams, and cable assemblies. Ability to create clear and detailed test procedures and technical documentation. Proficiency with Microsoft Office applications, including Word, Excel, and Visio. Experience testing FPGA-based products. Experience developing test solutions for RF products. Desirable Skills & Experience Experience testing communication interfaces including Ethernet, I2C, SPI, RS232, and RS485. Security Requirements Due to the nature of the work, candidates must be eligible and willing to obtain and maintain UK Security Clearance up to Developed Vetting (DV) level. This is an excellent opportunity for an experienced Test Development Engineer looking to take a lead technical role in the development of sophisticated automated test solutions within a highly regulated engineering environment.

Electronics Engineer Permanent role Based in Ampthill Offering circa £50,000 Do you hold a formal Electronic Engineering qualification to HNC or higher? Do you have EMC awareness at product and PCB level? Do you want to work with an industry-leading company? If your answers are yes to these, then this could be the role for you! As the Electronics Engineer, you will be working alongside a market-leading Defence and Aerospace company who are constantly growing and developing. They are always looking to bring on new talents such as yourself and further develop your skills to enable you to grow within the company and industry! Due to the nature of the work, you will be required ot achieve high level MOD security clearance. You will be involved in: Take responsibility for the design, development, and support of mixed electrical/electronic solutions from concept to completion Define processes, specifications, and procedures that support the design and manufacture of the electrical/electronic hardware Provide technical review of supplier capabilities to facilitate source selection Facilitate the development of functional and physical design requirements to ensure complete integrated design architecture Design and development of electrical/electronic circuitry (includes analogue, digital, microprocessor, FPGA design techniques, and power electronics). Analysis, test, and evaluation of electronic/electrical circuits and components Electrical/Electronic circuit simulation and analysis Your skillset & experience: Formal Electronic qualification such as HNC/HND/BEng Experience of Electronics Hardware Design & Electrical Product Development for Harsh Environments Electronic analysis of derating, stress, and tolerance Experience of Schematic Capture, PCB Layout, and IPC awareness (Preferably Altium) EMC Awareness at product and PCB level Awareness of Def-Stan/Mil Standards, Safety, and Quality processes Ability to support and manage aspects of Assembly, Integration, and Test Experience working with lab test equipment, JTAG design, and debug of electronic circuits Experience with Windchill or other Product Lifecycle Management tool If this all sounds like something you will be interested in then simply apply and we can discuss the opportunity further! Electronics Engineer Permanent role Based in Ampthill Offering circa £50,000 Disclaimer: This vacancy is being advertised by either Advanced Resource Managers Limited, Advanced Resource Managers IT Limited or Advanced Resource Managers Engineering Limited ("ARM"). ARM is a specialist talent acquisition and management consultancy. We provide technical contingency recruitment and a portfolio of more complex resource solutions. Our specialist recruitment divisions cover the entire technical arena, including some of the most economically and strategically important industries in the UK and the world today. We will never send your CV without your permission.

Electronics Engineer Permanent role Based in Ampthill Offering circa 50,000 Do you hold a formal Electronic Engineering qualification to HNC or higher? Do you have EMC awareness at product and PCB level? Do you want to work with an industry-leading company? If your answers are yes to these, then this could be the role for you! As the Electronics Engineer, you will be working alongside a market-leading Defence and Aerospace company who are constantly growing and developing. They are always looking to bring on new talents such as yourself and further develop your skills to enable you to grow within the company and industry! Due to the nature of the work, you will be required ot achieve high level MOD security clearance. You will be involved in: Take responsibility for the design, development, and support of mixed electrical/electronic solutions from concept to completion Define processes, specifications, and procedures that support the design and manufacture of the electrical/electronic hardware Provide technical review of supplier capabilities to facilitate source selection Facilitate the development of functional and physical design requirements to ensure complete integrated design architecture Design and development of electrical/electronic circuitry (includes analogue, digital, microprocessor, FPGA design techniques, and power electronics). Analysis, test, and evaluation of electronic/electrical circuits and components Electrical/Electronic circuit simulation and analysis Your skillset & experience: Formal Electronic qualification such as HNC/HND/BEng Experience of Electronics Hardware Design & Electrical Product Development for Harsh Environments Electronic analysis of derating, stress, and tolerance Experience of Schematic Capture, PCB Layout, and IPC awareness (Preferably Altium) EMC Awareness at product and PCB level Awareness of Def-Stan/Mil Standards, Safety, and Quality processes Ability to support and manage aspects of Assembly, Integration, and Test Experience working with lab test equipment, JTAG design, and debug of electronic circuits Experience with Windchill or other Product Lifecycle Management tool If this all sounds like something you will be interested in then simply apply and we can discuss the opportunity further! Electronics Engineer Permanent role Based in Ampthill Offering circa 50,000 Disclaimer: This vacancy is being advertised by either Advanced Resource Managers Limited, Advanced Resource Managers IT Limited or Advanced Resource Managers Engineering Limited ("ARM"). ARM is a specialist talent acquisition and management consultancy. We provide technical contingency recruitment and a portfolio of more complex resource solutions. Our specialist recruitment divisions cover the entire technical arena, including some of the most economically and strategically important industries in the UK and the world today. We will never send your CV without your permission.

Job Title: Hardware Engineer Location: Cheshire (hybrid 3 days onsite) Salary: Up to £55,000 (DOE) We are working with an established engineering business that designs and manufactures specialist electronic systems and control products. Due to continued growth, we re looking for a mid-level Electronics Design Engineer with experience across both hardware and embedded firmware. This is a hands-on, full-lifecycle engineering position where you will have the opportunity to take designs from initial concept and schematic capture through PCB layout, embedded firmware development, testing, validation and into production. About The Role Designing analogue and digital electronic circuits, including 12V and 24V power distribution, switching, sensing and control products. Producing multi-layer PCB layouts, considering high-current power routing, thermal management, EMC performance, creepage and clearance, DFM and design for test. Developing, testing and maintaining embedded firmware in C/C++ for 8-, 16- and 32-bit microcontrollers. Working with bare-metal and RTOS firmware, including peripheral drivers, interrupts and low-level debugging. Working with embedded communications including CAN, LIN, UART, SPI and I C. Supporting schematic capture, prototype build, board bring-up and debugging. Translating customer and end-user requirements into practical electronic and embedded system designs. Planning and carrying out bench, environmental and EMC testing. Using laboratory equipment including oscilloscopes, CAN analysers, load banks and in-circuit debuggers. Supporting products through validation and into production release. Working with manufacturing, quality and purchasing on BOMs, component selection, obsolescence, test fixtures and first-article inspection. Supporting the investigation and resolution of technical and field issues. Participating in design reviews and contributing to technical decisions within a small R&D team. About You A degree in Electronic Engineering, Electrical Engineering or a closely related discipline, or equivalent demonstrable experience. 3 5 years' commercial experience designing electronics products. Experience taking at least one electronics design through to production. Strong schematic capture and multi-layer PCB layout experience using a professional ECAD package such as Altium Designer, OrCAD, KiCad or similar. Practical embedded firmware development in C or C++ on microcontrollers. Experience with peripheral drivers, interrupts and low-level debugging. An understanding of automotive electrical environments, or an interest in developing this knowledge. The ability to manage multiple projects and competing priorities while working to deadlines. Strong written and verbal communication skills, with the ability to explain technical designs clearly. Please note, we cannot offer sponsorship for this position. If interested, please send over an updated CV.

Job Title: Hardware Engineer (Avionics & Embedded Systems) Location: Salisbury ( Hybrid-2 days a week in office) Clearance Requirement: UK SC Cleared or SC Eligible Role Overview We are an innovative Original Equipment Manufacturer (OEM) based in Wiltshire, specializing in advanced Uncrewed Aerial Systems (UAS). We are seeking a highly skilled Hardware Engineer to take ownership of the end-to-end design, multi-layer PCB layout, prototype bring-up, and environmental qualification of safety-critical flight control electronics, platform management computers, and sensor payload interfaces for fixed-wing, VTOL, and gas-turbine platforms. Key Responsibilities Schematic & PCB Design: Create multi-layer rigid and flex-rigid PCBs using Altium Designer for flight control computers, power distribution units (PDUs), and sensor interfaces. Avionics Bus Integration: Implement robust, low-latency communication bus architectures, including CAN / CAN FD, RS422, RS485, Ethernet, SPI, and I2C. Power Electronics: Design low-voltage DC-DC converters, switching regulators, and power distribution circuitry optimized for weight, thermal dissipation, and efficiency. Board Bring-Up & Verification: Lead hands-on prototype bring-up, fault isolation, and hardware-in-the-loop (HITL) bench testing using standard laboratory equipment. Environmental & EMC Qualification: Design for harsh operating environments, ensuring compliance with RTCA DO-160G, DEF-STAN 59-411, and MIL-STD-810. Design Assurance: Produce comprehensive technical documentation (ICDs, DFMEA, BOMs, Gerber files) operating under ISO 9001 / AS9100 quality frameworks. Required Skills & Experience Education: Degree in Electronic Engineering, Electrical Engineering, or Mechatronics. CAD Tools: Advanced proficiency in Altium Designer (Schematic Capture, Multilayer High-Speed PCB Layout, Controlled Impedance, DRC). Silicon Architecture: Proven experience with ARM Cortex-M microcontrollers (e.g., STM32) and microprocessors. Optional FPGA integration experience (Xilinx/Altera) is highly desirable. Test & Measurement: Hands-on expertise in electronic diagnostics, soldering, EWIS harness integration, and bench-test automation (Python/LabVIEW). Security Clearance: Due to the nature of the projects, candidates must have the ability to obtain and maintain UK Security Clearance (SC). Randstad Technologies is acting as an Employment Business in relation to this vacancy.

Are you a hands-on engineer driven by the challenge of developing cutting-edge electrified machine technology? We are currently seeking a highly skilled Electrical Systems Engineer to join a fast-paced, innovative development team in Peterborough. This is a critical, high-impact role where you will play a pivotal part in the development of electrified machine demonstrators and prototypes. As we accelerate our electrification initiatives, we are looking for a dedicated professional ready to take ownership of complex technical challenges immediately. About the Role This is a 12-month contract position that covers the full development lifecycle. You will transition from early concept and requirements definition through to system integration, machine build, and final validation. Operating in a specialised development environment, you will collaborate closely with cross-functional teams; including controls, software, and mechanical integration; to deliver safe, robust, and industry-leading electrical solutions. This role offers an exceptional opportunity to gain exposure to advanced battery and power electronics technology while working directly with prototype hardware. Responsibilities Define comprehensive electrical system requirements and technical specifications. Lead electrical architecture development and ensure seamless, high-quality system integration. Select electrical components and perform rigorous technical evaluations of various subsystems. Create detailed validation plans, test procedures, and clear acceptance criteria. Conduct hands-on machine electrical system validation, overseeing both HV and LV architectures. Execute proactive troubleshooting, commissioning, and debugging activities. Resolve integration issues effectively during the machine build phase. Document technical decisions, test outcomes, and engineering recommendations with precision. Qualifications Proven experience in developing and integrating electrical systems within automotive, off-highway, industrial, aerospace, or rail sectors. Substantial hands-on experience working safely with LV and HV electrical systems (ranging from 60V to 1500V+ applications). Expertise in commissioning, fault finding, and root-cause investigation using CAN-based tools and diagnostic equipment. Strong understanding of engineering standards, compliance requirements, and validation processes for electrified systems. Proficiency in analysing complex system interactions and a systematic, analytical approach to problem-solving. Ability to work effectively in a collaborative team, balancing detailed technical tasks with wider project objectives. What We Offer A competitive pay rate of 25.74 - 31.74 per hour. A 12-month contract providing direct involvement in cutting-edge electrification programs. A dynamic, task-force style environment emphasising real-world hardware interaction. Full-time, on-site engagement in Peterborough (37.5 hours per week). How to Apply Given the urgency of this requirement, our team is prepared to move quickly to identify and onboard the right talent. If you possess the required technical expertise and a passion for machine electrification, please submit your application today. We look forward to reviewing your qualifications and discussing how you can contribute to our upcoming development programs. Randstad CPE values diversity and promotes equality. No terminology in this advert is intended to discriminate against any of the protected characteristics that fall under the Equality Act 2010. We encourage and welcome applications from all sections of society and are more than happy to discuss reasonable adjustments and/or additional arrangements as required to support your application. Candidates must be eligible to live and work in the UK. For the purposes of the Conduct Regulations 2003, when advertising permanent vacancies we are acting as an Employment Agency, and when advertising temporary/contract vacancies we are acting as an Employment Business.

Senior Hardware Engineer / Technical Lead Lead Electronics Engineer An exciting opportunity has arisen for an experienced Senior Hardware Engineer / Technical Lead to join an innovative technology business developing advanced electronic products. This is a senior, hands-on technical leadership role, offering significant autonomy and ownership across the full product lifecycle. You will provide technical direction for new product development, lead engineering activities from concept through to production, and play a key role in shaping product architecture, engineering best practice and design strategy. Working within a small, highly skilled engineering team, you will act as the technical authority across multiple projects, guiding design decisions, supporting and mentoring engineers, and ensuring the successful delivery of high-quality electronic products. Whilst remaining technically hands-on, you will work closely with external design partners, PCB contractors, manufacturing partners and key stakeholders to drive projects through development, validation and production. This opportunity would suit an experienced electronics engineer who enjoys leading complex technical programmes, influencing product direction, and combining technical excellence with practical project leadership. Key Responsibilities for Senior Hardware Engineer / Technical Lead Provide technical leadership across electronic hardware development projects from concept through to production and product release. Define system architectures and lead key design decisions for new product development. Act as the technical authority for hardware design, ensuring engineering solutions meet performance, reliability, cost and manufacturability requirements. Lead the design, simulation and verification of mixed-signal electronic circuits. Review and approve schematics, PCB layouts and technical documentation. Mentor and support engineers, promoting engineering best practice and continuous technical development. Coordinate activities with external PCB designers, development partners and contract manufacturers. Oversee prototype build, testing, validation and regulatory compliance activities. Drive problem-solving activities and support root-cause analysis of complex technical issues. Champion design-for-manufacture (DFM), design-for-test (DFT), quality and continuous improvement initiatives. Support production, calibration and manufacturing engineering activities. Manage technical project risks, ensuring successful delivery against programme objectives, timescales and budgets. Collaborate with customers and stakeholders to translate requirements into robust engineering solutions. To succeed, you will ideally be an experienced electronics engineer with a strong background in mixed-signal hardware design and a proven ability to provide technical leadership within multidisciplinary product development environments. Key requirements for Senior Hardware Engineer / Technical Electronic Lead Degree qualified in Electronics Engineering or a related discipline. Extensive experience designing and developing electronic hardware products. Strong mixed-signal design experience, including analogue and digital circuit design. Experience developing low-noise, high-performance electronic systems. Strong understanding of electronic system architecture and product development lifecycles. Hands-on experience with schematic capture, PCB design and circuit simulation tools. Experience using Altium Designer or similar PCB design packages (OrCAD, Cadence, Eagle etc.). Experience with high-speed ADCs, signal conditioning and data acquisition systems. Experience supporting products through development, testing, validation and manufacture. Excellent analytical and problem-solving skills. Strong communication skills with the ability to influence technical decisions and engage stakeholders at all levels. In return, you will have the opportunity to undertake a highly autonomous role with full project ownership. Hours - Monday Friday, Flexible start/finish times, primarily site-based, with some hybrid flexibility. For further details, please contact Alison Kemp or apply via the link. Likely to suit individuals with a background as (but not limited to) Senior Electronics Engineer, Electronic Design Engineer, Electrical Engineer, Hardware Engineer, Electronic Technical Lead, Senior Hardware Engineer or similar INDENG

Join an established engineering manufacturer supplying advanced industrial equipment to customers across a variety of global markets. We are seeking a Control Systems Engineer to support the development, testing, commissioning and ongoing support of complex automated machinery. Up to 45,000 + Benefits This is an excellent opportunity for an engineer with strong controls and automation experience who enjoys a hands-on role combining electrical, software and commissioning activities. Based in the West Midlands, the role will also involve occasional travel within the UK and overseas to support installation, commissioning and customer requirements. Control Systems Engineer Responsibilities Commission and test advanced industrial machinery and automated equipment. Test and validate electrical control systems and machine safety functions. Configure, load and test PLC, HMI and motion control systems. Carry out machine calibration and prepare equipment for production and acceptance testing. Support the setup and commissioning of servo drives, inverter systems and associated control hardware. Develop and modify control system designs, including hardware and PLC software. Undertake functional testing to ensure equipment meets performance and customer specifications. Provide technical support to customers and internal engineering teams. Assist with troubleshooting, fault finding and continuous improvement activities. Control Systems Engineer Requirements Experience commissioning industrial automation, machinery or control systems. Ability to read and interpret electrical, pneumatic and hydraulic schematics. Experience working with low-voltage control systems. Knowledge of inverter drives, servo systems and motion control technologies. Good understanding of industrial sensors, actuators and machine automation. Practical fault-finding experience across electrical, pneumatic and hydraulic systems. Experience reading, modifying or developing PLC software. Knowledge of machine commissioning, testing and validation processes. Exposure to CNC machinery or automated manufacturing equipment would be advantageous. Control Systems Engineer Benefits 40,000 - 45,000 per annum, depending on experience. Permanent, full-time position. Monday-Thursday: 7:30am-4:00pm. Friday: 7:30am-3:00pm. Opportunity to work on technically advanced engineering projects. Varied role covering controls engineering, commissioning and customer support. UK and international travel opportunities. Hands-on involvement throughout the machine and project lifecycle. Supportive engineering environment with ongoing technical development opportunities. Apply now or get in touch for more information about this Control Systems Engineer opportunity in the West Midlands. ASC Connections Ltd acts as an employment business for temporary positions and an employment agency for permanent positions. We are committed to equal opportunity and diversity.

Job Title: Senior Hardware Engineer Location: Aviemore, Scottish Highlands (Full-time, On-site) Salary: Up to £60k (DOE) We're partnering with an innovative technology company that designs and develops advanced electronic hardware solutions for leading organisations around the world. Due to continued growth, they're looking for a Senior Hardware Engineer to join their team. This is a hands-on role where you'll take ownership of hardware development projects throughout the full product lifecycle, from concept and design through to validation, production, and product release. You'll also play an important role in mentoring junior engineers and contributing to the continued growth of the engineering team. About The Role Design and develop electronic hardware throughout the full product lifecycle. Produce circuit designs, schematic capture and PCB layouts. Develop prototypes and support product validation and testing. Take designs from prototype through to manufacture. Debug, fault-find and resolve hardware issues during development. Work closely with manufacturing to ensure successful product handover and production. Mentor and support graduate and junior engineers. Contribute to continuous improvement within the hardware engineering team. Support innovative product development in a collaborative engineering environment. About You Degree qualified in Electronic Engineering, Electrical Engineering or a closely related discipline. Experienced in Hardware product development. Strong background in electronic circuit design and schematic capture. Experience in taking products from prototype through to manufacture. Highly skilled in PCB layout principles and tools Understanding of hardware debugging and fault finding. Ability to mentor and develop junior engineers. Excellent organisational skills with a proactive approach to problem solving. Desirable Skills Experience with Python, FPGA development, and Compliance testing. Please note, we cannot offer sponsorship for this role. If interested, please send over an updated CV.

Electronic/Firmware Engineer Leeds - 5 days on-site 40,000 - 50,000 + 10% Pension Contribution + Holiday Are you an Electronics and Firmware Engineer looking for a varied role where you can work across the full product lifecycle, develop cutting-edge hardware and embedded systems, gain exposure to high-voltage applications, and have opportunities for international travel and specialist technical development? This is an excellent opportunity for an engineer with a background in electronics design and embedded firmware development to join a specialist engineering business working on bespoke technical solutions. The position offers a broad range of responsibilities, from concept and design through to testing, commissioning, and ongoing product support. In this role, you will be involved in electrical and electronic design, including circuit design, component selection, schematic capture, and PCB layout. You will also develop embedded firmware for microcontroller-based systems and support assembly, testing, fault finding, and commissioning activities. The ideal candidate will have experience in both analogue and digital electronics, embedded C programming, and the use of electronic test equipment. You will be a self-motivated individual who enjoys working independently while contributing effectively within a small engineering team. In return, you will join a growing engineering environment where you can continue developing your technical expertise, gain experience in specialist high-voltage applications, and work on innovative engineering projects with customers worldwide. The Role: Electronic hardware design including schematics, PCB layout, and component selection Embedded firmware development for microcontroller-based systems Creation of wiring diagrams, BoMs, and technical documentation Testing, fault finding, repair, and product support Support for onsite commissioning and customer installations International travel to customer and company sites with potential offshore work The Person: Experience in analogue and digital circuit design Embedded C programming experience with low-level hardware knowledge Familiar with oscilloscopes, signal generators, loads, and other test equipment Hands-on prototyping skills including soldering and wiring Strong communication skills with the ability to work independently and within a team Degree-qualified with industry experience, or significant equivalent practical experience Reference Number: BBBH(phone number removed) Rise Technical Recruitment Ltd acts an employment agency for permanent roles and an employment business for temporary roles. The salary advertised is the bracket available for this position. The actual salary paid will be dependent on your level of experience, qualifications and skill set and will be decided by our client, the employer. Rise are not responsible or liable for any hiring decisions made by the end client. We are an equal opportunities company and welcome applications from all suitable candidates.

We are recruiting on behalf of a electronics engineering organisation looking to appoint an experienced Principal Electronic Design Engineer to take a leading role across a range of complex engineering projects. This is a senior technical position suited to an experienced electronics engineer who enjoys taking ownership of projects, coordinating engineering activity and providing technical guidance to other engineers, without necessarily wanting a traditional people-management role. This is an excellent opportunity for an experienced Senior or Principal Electronic Design Engineer looking for a role that combines technical engineering knowledge with project ownership, technical leadership and the opportunity to influence how engineering projects are delivered. Principal Electronic Design Engineer - The role - PCB, Circuit Design, Prototype, Test, Manufacturing You will act as a key technical point of contact across multiple projects, helping to ensure electronic and hardware engineering deliverables are completed to the required standards of quality, safety, cost and timescale. A major part of the role will involve project coordination and technical leadership. You will work closely with engineering colleagues, project managers and other stakeholders to define requirements, plan engineering activities, resolve technical issues and ensure projects progress effectively from concept through design, verification, validation and delivery. You will also support and guide other engineers within the team, providing technical direction, reviewing engineering work and helping less experienced engineers develop their capabilities. Key responsibilities will include coordinating electronic and hardware engineering activity across multiple projects, providing technical leadership and guidance to engineering teams, managing technical project priorities and deliverables, supporting project planning and resource requirements, reviewing designs and technical documentation, ensuring engineering solutions meet customer and regulatory requirements, and maintaining high standards of technical, quality and safety compliance. Principal Electronic Design Engineer - Skills - PCB, Circuit Design, Prototype, Test, Manufacturing You will also contribute to the continued development of engineering tools, processes and working practices, helping to improve both the quality and efficiency of engineering delivery. We are looking for an experienced Electronic Design Engineer who has progressed into a senior, lead or principal-level position and is comfortable taking technical ownership of complex engineering projects. You should have a strong background in electronic product design and development, together with experience of taking products or systems through the full engineering lifecycle. Previous experience coordinating projects, leading technical work packages or guiding other engineers will be particularly important. You should be comfortable balancing multiple priorities and communicating effectively with engineering, project and commercial stakeholders. A degree or equivalent qualification in Electronic Engineering, Electrical Engineering or a related STEM discipline would be preferred. Principal Electronic Design Engineer, PCB, Circuit Design, Prototype, Test, Manufacturing Apply now for a confidential discussion and further information.

Our client, a leading firm in the cyber security sector, is currently seeking an OT Cybersecurity Engineer to join their dynamic team. This permanent position is focused within the energy industry, playing a crucial role in ensuring the secure development and implementation of cybersecurity policies, processes, and controls for Operational Technologies (OT). Key Responsibilities: Support the Threat and Risk Assessment process for client products, solutions, and services. Conduct cybersecurity risk assessments for OT components within solutions and services. Provide secure design and architecture support for OT projects following Purdue Model principles (Levels 0-3). Contribute to security baselines, code-signing processes, and secure boot architecture for OT metering and embedded systems. Analyse firmware vulnerabilities using appropriate tools without impacting operational availability. Support security testing throughout the project lifecycle, ensuring security factory acceptance tests are undertaken. Integrate OT asset visibility and threat detection platforms. Maintain compliance with energy sector regulations and frameworks, including ISA/IEC 62443, NIST SP 800-82, and others. Provide procedural and technical cybersecurity advice to project designers, engineers, and testers. Monitor and report on cybersecurity target achievements and proactively suggest improvements. Job Requirements: Experience in cybersecurity with exposure to Operational Technology (OT), ICS, or SCADA utility environments. Working knowledge of core OT security principles, technologies, and processes, including ISA/IEC 62443 framework. Understanding of firmware and hardware security concepts, including cryptographic signing and hardware security modules (HSMs). Familiarity with sector-specific protocols such as DNP3, IEC (phone number removed)-104, Modbus, and OPC UA. Skills in problem-solving, analytical abilities, and strong organisational skills. Relevant degree in Electrical Engineering, Computer Engineering, Computer Science, or equivalent experience. Relevant certifications such as GICSP, ISA/IEC 62443 Specialist, or GRID are desirable. Ability to work effectively and responsibly without close supervision, supporting a collaborative team environment. Benefits: Competitive compensation package Opportunity for professional development and training Work on a variety of challenging projects Supportive and inclusive work environment Comprehensive employee benefits package If you are a skilled OT Cybersecurity Engineer looking to advance your career in a forward-thinking and prestigious company, we would love to hear from you. Apply now to be part of our client's dedicated team.

ATE Technical Lead The R&D ATE team is looking for an ATE Technical Lead to lead the development, deployment, and lifecycle ownership of Automated Test Equipment for a product line. This role combines hands-on technical leadership, multidisciplinary project execution, production-line support, and close collaboration with internal engineering teams and external manufacturing partners. The position on offer is a temporary contract role for 2 years offering hybrid working (3 days onsite and 2 days from home) with an hourly rate of 21.54 - 34.62 depending on experience, plus 25 days holiday pro rata per annum. The ATE Technical Lead will define test strategies, guide tester architecture decisions, lead tester bring-up, improve production quality and yield, and support scalable ATE implementation across manufacturing environments. The role includes close day-to-day cooperation with Taiwanese Contract Manufacturing Organization (CMO), including technical alignment, issue resolution, documentation transfer, production readiness, and coordination across time zones. Join our client to work in a dynamic R&D environment that combines hardware, software, data, manufacturing, and connected-device expertise, while leading mission-critical testing platforms that directly influence product quality and operational excellence. This is a great opportunity to Join as they build the team that will develop and deliver our future generations of Vence Collar. A product rich in technological challenges across the multidisciplinary domains with its advanced system architecture and connectivity. You will experience the success of your work in customers hands with short delivery cycles and quick customer feedback. Role Functions: The responsibilities will include, but are not limited to, the following: Lead the architecture, development, validation, deployment, and lifecycle management of ATE systems for a product line. Own the ATE technical roadmap, ensuring maintainability, standardization, scalability, and alignment with product and production needs. Define tester requirements, test strategies, integration plans, acceptance criteria, documentation packages, and production transfer plans. Lead tester bring-up and integration across mechanical, electronic, embedded, software, fixture, instrumentation, and production interfaces. Manage ATE project execution end-to-end, including requirements, design reviews, gate approvals, planning, scheduling, risk management, and stakeholder communication. Work closely with CMOs to support production readiness, tester deployment, issue escalation, troubleshooting, and continuous improvement across time zones. Coordinate technical activities with hardware, software, embedded, mechanical, operations, manufacturing engineering, quality, and external subcontractors. Provide Tier 2 and technical-lead support for production ATE systems, including troubleshooting, calibration, failure analysis, reliability improvement, and yield optimization. Analyze test and manufacturing data to identify trends, root causes, yield improvements, and opportunities for process optimization. Collaborate with multidisciplinary product and platform teams in the UK, Israel and California, USA. Experience, Knowledge and Skills include: The position requires multidisciplinary understanding, strong hands-on technical capabilities, and the ability to work effectively in a multi-site matrix organization. The candidate should be comfortable leading technical topics while working closely with system engineers, hardware engineers, embedded software developers, mechanical engineers, production teams, quality teams, subcontractors, and CMOs. Skills & Characteristics: Strong ownership mindset with the ability to lead complex technical topics from concept to production implementation. Ability to focus on what is important, prioritize risks, and drive issues to practical resolution. Organized and able to work well in a structured process environment with clear documentation and follow-up. Strong hands-on approach, including debugging, tester bring-up, system integration, and production troubleshooting. Ability to communicate clearly across disciplines, sites, vendors, and time zones. Excellent team player with strong collaboration skills and a desire for learning and innovation. Comfortable working with external partners and manufacturing sites, including technical alignment with CMOs. Qualifications, Education and Previous Experience include: Requirements: B.Sc. or higher in Electrical Engineering, Computer Engineering, or a related technical field. Minimum 5 years of hands-on experience in ATE system integration, development, validation, deployment, and production support. Proven experience leading technical projects in a multidisciplinary engineering or manufacturing environment. Strong hands-on expertise with hardware systems, embedded interfaces, networks, instrumentation, debugging, and system-level integration. Strong hands-on experience with National Instruments TestStand, automated test development, hardware integration, and production support environments, or equivalent automated test platforms. Proficiency in Python and test automation development, including debugging, tool creation, data processing, and system integration. Strong analytical skills for test data analysis, failure investigation, process improvement, and yield optimization. Advantage: Experience working with Linux-based systems, command-line tools, and SQL databases in engineering or manufacturing environments. Experience with manufacturing databases, production data pipelines, and engineering data analysis tools. Experience with hardware communication protocols such as I2C, SPI, UART, Ethernet, or similar embedded and instrumentation interfaces. Experience with automated instrumentation, fixture design considerations, tester safety, calibration, and production maintainability. Knowledge of server, platform, and test-station management in production environments. Experience working with subcontractors, external vendors, CMO production teams, and procurement processes for tester or prototype parts.