815 jobs found

Mechanical Assembler Redditch Location: Redditch Pay Rate: £13.50 per hour Working Hours: Monday to Thursday: 8:00 am 4:45 pm Friday: 8:00 am 2:45 pm (Early finish) We are currently seeking a Mechanical Assembler to join a reputable global manufacturing company based in Redditch. This is an excellent opportunity for individuals with hands-on mechanical, assembly, production or engineering experience who wish to develop a long-term career within a modern, fast-paced manufacturing environment. Key Responsibilities Mechanical assembly of components and sub-assemblies Safe use of hand and power tools Reading and interpreting technical drawings and build instructions Inspecting finished products to ensure quality standards are met Conducting testing procedures using specialist equipment Supporting production targets and deadlines Maintaining a clean, safe and organised work area Candidate Profile Previous experience in assembly, manufacturing, fitting or engineering Confident and competent in using hand tools Mechanically minded with strong practical skills Eager to learn and develop new skills Able to read and understand technical drawings Excellent attention to detail with a strong focus on quality Reliable with a positive and proactive work ethic Who Should Apply? Mechanical Fitters Production Operatives with tool experience Vehicle Technicians / Mechanics Junior Engineers Anyone practical and mechanically minded looking to progress their career This is a fantastic opportunity to join a well-established employer offering stability, comprehensive training and excellent career development prospects. We welcome applications from all suitably qualified candidates. Please apply today with your CV to be considered for this role. REDINDJ

ELECTRICAL TEST ENGINEER (EXPERIENCED LEVEL) Job Title: Electrical Test Engineer - Experienced Location: Dorset Department: Electrical Engineering/Test & Validation Reporting To: Lead Electrical Test Engineer/Head of Engineering 1. Job Purpose The Electrical Test Engineer (Experienced Level) is responsible for planning, executing, and analysing electrical and electronic test activities to validate the performance, safety, and compliance of aerospace and defence systems. The role provides strong technical capability in electrical testing, instrumentation, data acquisition, and test procedure development. The post holder will support the full test life cycle-from requirements definition and test planning through to execution, reporting, and certification-ensuring that electrical systems meet design intent, regulatory standards, and customer expectations. 2. Key Responsibilities 2.1 Test Planning & Preparation Develop detailed electrical test plans, procedures, and acceptance criteria based on system requirements. Define test setups, instrumentation requirements, and data acquisition configurations. Support the design and commissioning of electrical test rigs, harnesses, and interface equipment. Ensure all test documentation complies with internal standards and applicable regulations. Conduct risk assessments and ensure safe execution of all electrical test activities. 2.2 Test Execution & Data Acquisition Perform electrical tests including continuity, insulation resistance, power quality, load testing, functional testing, and environmental electrical testing. Install and configure electrical instrumentation such as multimeters, oscilloscopes, power analysers, and signal generators. Operate data acquisition systems and test control equipment to capture accurate and reliable data. Troubleshoot electrical issues, instrumentation faults, and test anomalies during execution. Ensure accurate recording of test conditions, observations, and deviations. 2.3 Data Analysis & Reporting Analyse electrical test data to verify compliance with design requirements and standards. Produce detailed test reports including plots, measurements, and engineering conclusions. Identify electrical failures, root causes, and corrective actions where required. Provide clear technical feedback to design, systems, and manufacturing teams. Support certification and compliance activities with robust electrical test evidence. 2.4 Engineering Support & Collaboration Work closely with electrical, systems, and manufacturing engineers to ensure test coverage aligns with design intent. Support prototype builds, harness manufacture, and integration activities with test-based insights. Assist in resolving electrical design issues through targeted test investigations. Participate in multidisciplinary design reviews and provide electrical test expertise. 2.5 Health, Safety & Quality Ensure all electrical test activities comply with UK Health & Safety legislation including HASAWA 1974. Promote safe working practices in laboratories, workshops, and test facilities. Embed quality and traceability into all test documentation and processes. Support audits, compliance checks, and continuous improvement initiatives. 3. Knowledge, Skills & Experience 3.1 Essential Degree in Electrical Engineering, Electronics Engineering, or related discipline. Experience conducting electrical testing in aerospace, defence, automotive, or similar high-integrity environments. Strong understanding of electrical systems, wiring practices, power distribution, and electronic components. Proficiency with electrical instrumentation and data acquisition systems. Ability to interpret electrical schematics, wiring diagrams, and technical specifications. Strong analytical skills with experience processing and interpreting electrical test data. Good communication skills and ability to work collaboratively across engineering teams. Working knowledge of quality management and configuration control processes. 3.2 Desirable Experience with environmental electrical testing (eg, DO-160, MIL-STD-461/810). Familiarity with aerospace or defence electrical standards and certification processes. Experience designing or commissioning electrical test rigs and harnesses. Knowledge of EMC considerations, grounding, shielding, and electrical safety. Experience with PLM or document control systems (eg, Windchill, Teamcenter, Vault). 4. Security Clearance This role is subject to UK Security Clearance requirements (BPSS, SC, or higher). The post holder must be eligible and able to obtain and maintain the required level of clearance.

Machine Tool Engineer Ref: Jo7123/NPH Location: Halesowen Salary: £35,000 to £38,250 + Pension + Overtime Days - Monday to Friday - 10am to 6pm The Company My client is a specialist manufacturer producing forgings for defence, aero, gears, Oil and gas, food processing, nuclear, rail, power, mining and paper industries. They also provide heat treatment, machining, test lab and steel stock working capabilities. Due to expansion, they are looking to add to their existing team. Key Skills • Apprentice Trained Engineering • Machinery Fitting Experience • Experience of Automated CNC & Milling Machines The successful candidate will be apprentice trained engineer, with experience in the machinery manufacture industry. You will have a strong engineering pedigree with experience working with CNC machine centres, lathes, and millers, including older manual lathes and milling machines. Key Duties; Carry out both planned preventative maintenance (PPM) and reactive maintenance on plant machinery, equipment, and buildings. Proactively support initiatives to improve plant reliability and performance. Execute and contribute to planned maintenance schedules. Assist with the implementation, updating, and optimisation of the Computerised Maintenance Management System (CMMS). Collaborate with and support other departments as required. Undertake additional duties as reasonably assigned by management. This is a fantastic opportunity to join a secure forward thinking group, with excellent scope for technical career development. If you are interested in this role, please send a copy of your current CV using the details provided, interviews will be held locally, and the company is looking to recruit this role as soon as possible. ETS Consulting Ltd - Recruitment specialists with specific areas of expertise in the Manufacturing, Technical, Engineering and Sales markets. ETS Consulting Limited act as an employment business and employment agency and are registered in England and Wales as ETS Consulting Limited, registered no . Registered office address 7 Stamford Square, Ashton Under Lyne, Lancashire, United Kingdom, OL6 6QU. If one of our consultants contacts you in relation to this role, please be aware that as part of our registration process you will be required to provide ETS Consulting with proof of your identity along with proof of your eligibility to work in the United Kingdom.

Principal Quality Engineer Role Purpose The Principal Quality Engineer is responsible for overseeing the execution and continuous improvement of quality processes to ensure compliance with customer, regulatory, and internal standards, particularly AS9100, ITAR, and NADCAP. This role provides technical leadership in quality engineering, supports strategic quality initiatives, and mentors the wider quality team to uphold rigorous standards in aerospace and defence gear manufacturing. Key Responsibilities Leadership and Oversight: Lead day-to-day quality engineering activities and provide mentorship to other Quality Engineers and Inspectors. Act as deputy to the Quality Manager where appropriate and support high-level decision-making on quality matters. Represent the Quality function in internal project teams, customer quality meetings, and regulatory audits. Compliance and Systems Management: Ensure ongoing compliance with AS9100, NADCAP, ISO 9001, ITAR, and customer-specific requirements. Drive maintenance and continual improvement of the Quality Management System (QMS), ensuring documentation, records, and procedures are fully aligned with certification standards. Support preparation and execution of external audits (certification, NADCAP, customer, and regulatory). Technical Quality Engineering: Lead or coordinate advanced quality planning activities including APQP, PPAP, control plans, FMEAs, and FAIRs (AS9102). Ensure robust inspection and test methods are in place for gear manufacturing processes (e.g. hobbing, grinding, heat treatment, NDT). Champion the use of risk-based thinking and structured problem-solving methodologies. NADCAP and Special Processes: Oversee compliance and audit readiness for NADCAP-accredited processes (e.g. heat treatment, NDT, coatings). Liaise with special process owners to ensure qualification and requalification activities meet NADCAP requirements. ITAR and Export Compliance: Ensure quality activities, data handling, and document control meet ITAR and UK Export Control requirements. Act as quality liaison for defence contracts requiring export licensing and controlled technical data. Root Cause and Continuous Improvement: Lead high-priority root cause investigations and corrective/preventive actions (RCA/CAPA). Drive cross-functional initiatives for process capability improvement, yield enhancement, and defect reduction. Monitor and report on key quality metrics (KPIs), using data to identify trends and opportunities for improvement. Required Skills and Competencies: Expert knowledge of AS9100, NADCAP, ITAR, and ISO 9001 standards. Proven leadership in Quality engineering within aerospace or defence sectors, including training and mentoring. Experience with gear manufacturing processes and associated quality challenges. Strong analytical and problem-solving skills (8D, DMAIC, 5 Whys, Fishbone). Ability to interpret complex technical drawings, specifications, and GD&T. Familiarity with quality tools: SPC, MSA, FMEA, APQP, PPAP, FAIRs. Comfortable working in regulated environments with strong attention to detail and compliance. Qualifications and Experience: Degree or HND/HNC in Engineering, Manufacturing, or Quality (or equivalent). Minimum 7 years experience in quality roles within aerospace/defence. Trained AS9100 and NADCAP internal auditor. Demonstrable experience managing NADCAP-accredited special processes. Knowledge of ITAR and UK Export Control compliance in a manufacturing context. Six Sigma Green or Black Belt certification (desirable). Chartered Engineer (CEng) status or working toward (desirable). Benefits: Employer pension contribution (6%) Annual bonus 25+ days holiday Training and development funding Life assurance

Process Development Technologist Sharnbrook Hybrid 34,000 - 50,000 Join one of six world class innovation hubs developing some of the world's most loved products. The site is home to the Advanced Prototype & Engineering Centre where every day is full of experiments of new formulations and production technologies We're looking for a hands-on Process Development Technologist to help turn breakthrough ideas into large scale, factory-ready products. What You'll Do Work with formulators to take small lab batches and turn them into factory processes. Write process specs and run manufacturing trials Operate pilot plant machinery (mixing, batching, filling) Produce test batches for consumer and clinical studies Troubleshoot texture, processing and filling issues Drive cost savings and explore new technologies What we're looking for: Food Science, Chemical/Mechanical Engineering or similar background Experience in FMCG, process engineering, or pilot plant operations Practical, hands-on approach and strong problem-solving skills What you'll get: Hybrid working pattern Internal development that's taken seriously! Progression opportunities Salary 35,000 - 50,000 DOE Private Medical Discounted platform Bonus Up to 25 days holiday Up to 25% pension If you are interested in this position please click 'apply'. Hunter Selection Limited is a recruitment consultancy with offices UK wide, specialising in permanent & contract roles within Engineering & Manufacturing, IT & Digital, Science & Technology and Service & Sales sectors. Please note as we receive a high level of applications we can only respond to applicants whose skills & qualifications are suitable for this position. No terminology in this advert is intended to discriminate against any of the protected characteristics that fall under the Equality Act 2010. For the purposes of the Conduct Regulations 2003, when advertising permanent vacancies we are acting as an Employment Agency, and when advertising temporary/contract vacancies we are acting as an Employment Business.

Job Description Manufacturing Services Technician - Tool Maker Derby Permanent, full Time Onsite - Derby Shift Pattern: 24/6 (12hr shifts) including some weekends Why join Rolls-Royce? At Rolls-Royce we are proud to be a business that has truly helped to shape the modern world and are committed to always being a force for progress; powering, protecting and connecting people everywhere. By joining Rolls-Royce, you'll have the opportunity to work on world-class solutions, supported by a culture that believes individuality is our greatest strength, and all perspectives, experiences and backgrounds help us innovate and enable our high-performance culture. We have a fantastic opportunity for Manufacturing Services Technician (Toolmaker) to join our Turbine Blade Facility in Derby, in this role you will be producing parts from engineering drawings and maintaining critical tooling and fixtures in a fast-paced production environment. You will support equipment availability through fault rectification, servicing, supplier engagement and continuous improvement, while maintaining strong adherence to Health and Safety standards and a Zero Harm culture. What you will be doing: Perform a range of routine and reactive, maintenance on tooling and fixtures across a broad range of manufacturing assets and production equipment to ensure that manufacturing equipment is safe, available and capable for use when required. Analyse equipment data to inform and implement the most effective approach towards repair, manufacture or modification. Collect, organise, and analyse data in support of Key Performance Indicators for the Manufacturing Services Department as required. Work with site Manufacturing Engineers to help understand and implement tooling requirements and work alongside equipment OEM engineers as required Utilise problem solving skills and abilities to make sound recommendations based on judgement, training and previous experience to identify, recommend and implement improvements Liaise with the onsite spares integrator to ensure spares inventory reflects operational demands with minimal inventory Position qualifications: NVQ level 3 and relevant time served apprenticeship in a relevant subject. Ability to use and understand hand gauges, inspection equipment and computerised measuring equipment. Ability to read engineering drawings and manufacture components based on these Experience in operating manual and CNC machine tools to a high degree in order to manufacture components to Engineering drawings and be able to reverse engineer and manufacture components where drawings aren't available Experience in programming CNC machine tools preferable Ability to use CAD/CAM PLM software to design parts and create technical drawings is preferable but not essential Our vision is to ensure that the excellence and ingenuity that shaped our history continues into our future. Our multi-year transformation programme aims to turn Rolls-Royce into a high-performing, competitive, resilient and growing company. Join us, and it can be your future vision too. Rolls-Royce are committed to being a respectful, inclusive, and non-discriminatory workplace where individuality is valued, diverse perspectives fuel innovation, and everyone can thrive. Closing date: 27th May 2026 As part of our selection process, candidates in certain locations may be asked to complete an online assessment, which can include cognitive and behavioural aptitude testing relevant to the role. If required, full instructions for the next steps will be provided. Job Category Manufacturing Services - Factory Staff Posting Date 13 May 2026; 00:05 Posting End Date 26 May 2026PandoLogic.

Overview Founded in 1985, Andover Trailers Limited has become a leader in the field of specialist body and trailer manufacturing. We are renowned for our unrivalled engineering standards and the highest quality materials, ensuring our products offer an unmatched combination of strength, durability, and operational ease. Each trailer and body leaving our facility is a testament to our commitment to "Better by Design," tailored to meet the precise needs of our customers now and in the future. Role Purpose To provide high-quality on-site servicing, fault diagnosis, and repair of heavy commercial trailers and MOD trailers. The role requires strong mechanical and electrical skills, a proactive approach, and a commitment to safety and reliability. Key Responsibilities Perform routine maintenance, inspections, and repairs on trailers at customer locations Diagnose and fix faults in braking systems, suspension, electrical wiring, chassis, and pneumatics Replace worn or damaged parts and perform minor welding or fabrication when needed Complete all job documentation, service reports, and time sheets accurately Communicate regularly with the Service Coordinator regarding job status and requirements Ensure all work complies with VOSA, IVA, and MOD standards and specifications Maintain the service van, tools, and stock in a safe and organised manner Work safely and complete site-specific risk assessments prior to starting work Deliver a professional and courteous service to all customers Quality Standards Responsible for the quality output within your respective area/department Ensure all work meets the required quality standards and follows the relevant specifications in line with drawings and build instructions Highlight any quality issues immediately and support investigation or corrective actions Conduct quality inspections and ensuring the Job Book inspection sign-offs have been completed for your area/department before moving the product on Work closely with the Quality department to address non-conformances and implement corrective actions Drive continuous improvement initiatives to reduce waste, improve efficiency and enhance product quality Communication & Liaison Act as a point of contact between shop floor, production teams and management Provide regular up-dates on progress, issues and resource/material shortages or re-work requirements Complete production records including job book inspection sign-offs Communicate clearly with fitting, welding, paint and quality teams to resolve issues Work closely with Quality, Health & Safety and Stores teams to maintain smooth workflow Health & Safety Responsible for health and safety within respective area/team Ensure all work is conducted in accordance with company health & safety policies, risk assessments, and statutory regulations Promote a culture of safety-first and challenge unsafe behaviours or conditions via our near miss procedures Participate in toolbox talks, safety briefings, and support accident/incident investigations if any witness, near misses in line with support from Health & Safety Advisors Maintain a tidy and organised bay in line with Health and Safety 6S principles Ensure all tools, equipment and PPE are used correctly and maintained in good condition Other Duties Support cross-functional teams as and when required Contribute to audits, compliance checks and improvement projects Perform any other reasonable duties in line with business needs Essential Knowledge & Experience Proven experience in trailer maintenance and repair (commercial or MOD) Strong diagnostic ability across mechanical, pneumatic, and electrical systems Full UK driving licence Ability to work independently in the field Good communication and documentation skills Working knowledge and understanding of health and safety practices Desirable Knowledge & Experience HGV licence, preferable Knowledge of MOD-spec trailer requirements Welding and basic fabrication skills IRTEC certification or similar Familiarity with EBS/ABS systems and hydraulic components Working Hours Monday to Friday, 39 hours per week Job Type Full-time Salary From £17.26 to £18.74 per hour equivalent to £35, 000. 00- £38, 000 per annum Benefits Competitive hourly rate or salary (based on experience) 20 days holiday plus bank holidays 2/3 days gifted by the Company for Christmas/New Year Early Friday finish time of 3.00pm, for all employees Bonus Scheme- In Place for hourly paid Production/Workshop employees Overtime available- In Place for hourly paid Production/Workshop employees Free on-site Parking Convenient location, close to food outlets, green space & parks Company team events Life Assurance Scheme Pension Scheme Training and development opportunities Additional Information On site/field based working required with limited flexibility for remote working. This will include some working away from home. -Statutory Sick Pay (SSP) only Job Types: Full-time, Permanent Pay: £35,000.00-£38,000.00 per year Application question(s): Experience in trailer maintenance and repair (commercial or MOD) Strong diagnostic ability across mechanical, pneumatic, and electrical systems Ability to work independently in the field Work authorisation: United Kingdom (required) Work Location: In person

REED Engineering & Manufacturing are working exclusively with Graphoidal who are part of the Rondot Grouo of companies Want to join a purposeful international group? With more than 400 committed men and women, Rondot Group brings together 9 complementary brands-Graphoidal, Rondot, Quantum, Sonicam, Novaxion, Sheppee, Ramsey Products, Pennine and LWN Lufttechnik-within a multicultural environment where technical expertise is built on strong human values, driven by teams passionate about their work. Joining the Group means, above all, taking part in a human adventure, growing alongside internationally engaged teams and contributing to innovative projects for the hollow glass industry. Strongly committed to sustainable development, Rondot Group works every day to build a more responsible and sustainable future, delivering solutions aligned with the challenges of tomorrow. Find out more: Service Engineer - UK and Global travel Graphoidal Developments Ltd (Rondot Group) - Chesterfield - Graphoidal Developments, a global supplier of lubrication and coating systems for the glass container industry, is looking for a Service Engineer with electrical control experience. Based in Chesterfield, you'll support customers worldwide through installation, commissioning, maintenance, and troubleshooting of our precision equipment. Key Responsibilities Install, commission, test, repair, and maintain lubrication/coating systems globally Provide on-site customer support and ensure high service standards Diagnose electrical/PLC control issues (Siemens/Schneider ideal) Produce clear engineering service reports Participate in call-out cover with the wider team Skills & Requirements ONC/HNC in Electrical/Electronic Engineering (or equivalent) Strong mechanical aptitude and hands-on experience Able to work independently under pressure and to tight deadlines Willing to travel regularly in the UK and overseas, including out-of-hours work Good IT skills; PLC experience preferred Full driving licence essential; additional languages a bonus Full training provided before customer visits, the position also includes a market rate allowance of up to £10,000 per annum + travel + accommodation on travel etc.

A leading engineering organisation is seeking a talented Electronic Systems Engineer to play a key role in the design and integration of complex electronic systems. This is an excellent opportunity to work on advanced, high-integrity engineering projects within a collaborative and innovative environment. They work on a Hybrid basis, with 2-3 days per week onsite, at either their Stevenage, Bristol or Bolton offices. The Role As an Electronic Systems Engineer, you will take ownership of system-level design and integration, translating high-level requirements into robust, fully integrated hardware solutions. You'll be responsible for defining system architectures, breaking down complex equipment into subsystems, and ensuring seamless connectivity across interfaces. Key Responsibilities: Lead system-level electronic design from concept through to deployment Define system architectures, interfaces, and interconnects Produce high-quality technical documentation, including: System schematics Wiring diagrams Interface control documentation Block diagrams Collaborate with cross-functional teams (mechanical, software, firmware, manufacturing) Support system integration, validation, and acceptance testing Conduct root cause analysis and resolve system-level issues Ensure compliance with relevant safety, EMC, and regulatory standards About You We're looking for a systems-oriented engineer who thrives in complex environments and enjoys solving challenging integration problems. Essential: Degree-qualified in Electronic Engineering, Electrical Engineering, or a related discipline Strong experience in system-level electronic design and integration Proven ability to define system architectures and equipment breakdowns Solid understanding of analogue and digital electronics Experience producing technical documentation and system diagrams Strong analytical, problem-solving, and communication skills Familiarity with systems design tools (e.g. DOORS, Rhapsody, MATLAB/Simulink) Desirable: Experience with power distribution and grounding strategies Knowledge of communication protocols (e.g. CAN, Ethernet, SPI, I C, UART) Understanding of EMC/EMI mitigation Background in regulated industries such as aerospace, defence, automotive, rail, or medical Experience with SPICE simulation tools What's on Offer Competitive salary ( 52,500 - 57,000 depending on experience) Annual performance bonus Generous pension scheme (up to 14% combined contributions) Paid overtime opportunities Flexible working arrangements Additional annual leave options (including flexi leave) Enhanced parental leave benefits On-site facilities including subsidised meals and free parking Healthcare cash plan Additional Information Due to the nature of the work, applicants must be eligible to obtain security clearance. This typically requires British citizenship or dual nationality including British citizenship, along with the ability to pass standard background checks. Apply Now If you're an experienced Electronic Systems Engineer looking to work on technically challenging projects with real-world impact, we'd love to hear from you. Apply today or contact us confidentially for more information.

AMS is a global workforce solutions partner committed to creating inclusive, dynamic, and future-ready workplaces. We help organisations adapt, grow, and thrive in an ever-evolving world by building, shaping, and optimising diverse talent strategies. Our Contingent Workforce Solution (CWS) is one way we support our clients. Acting as an extension of their recruitment teams, we connect them with skilled interim and temporary professionals, fostering workplaces where everyone can contribute and succeed. On behalf of our globally respected client who develop cutting-edge technologies that deliver clean, safe and competitive solutions to meet the planet's vital power needs we are looking for a Senior Project Engineer - Manufacturing for a 12 month contract based in Derby . This role is a hybrid position in which you will be based in our client Derby facility Tues-Thurs each week and working from home Monday and Friday. Some occasional travel within the UK and Europe to support test activities will be required. Purpose of the role: Lead the end-to-end delivery of multiple bespoke test rig projects, ensuring high-quality outcomes that meet customer requirements Act as the key interface between customers, engineering teams, and suppliers to translate technical needs into structured delivery plans Coordinate complex, multi-stakeholder activities to deliver certification-ready test solutions within defined timelines and standards What you'll do: Manage test rig projects from concept through to certification Engage with customers to define requirements and agree delivery plans Work closely with design engineers to develop testing solutions Coordinate test setup, including software, hardware, and location Manage suppliers and supply chain for externally built rigs and components Apply structured delivery processes and track progress using planning tools Analyse and communicate project data and updates to stakeholders Deliver final test results and certification documentation The skills you'll need: Experience in project engineering or project management within an engineering environment Strong mechanical engineering understanding Proven ability to manage multiple projects end-to-end Excellent stakeholder and supplier management skills Experience using planning tools (e.g. MS Project, P6, Oracle) Experienced in verification and validation exercises Ability to interpret technical requirements and communicate clearly Strong analytical and reporting skills Next steps We will only accept workers operating via an Umbrella engagement model. If you are interested in applying for this position and meet the criteria outlined above, please click the link to apply and we will contact you with an update in due course. AMS, a Recruitment Process Outsourcing Company, may in the delivery of some of its services be deemed to operate as an Employment Agency or an Employment Business

My client, arguably one of the best companies in the sector, are an expanding international M&E consultancy, with a proven track record in low energy design, focused on providing excellent design solutions to clients. They are looking to employ an experienced Senior / Principal Engineer to be based in our NE office. You will have experience in the delivery of European data centres and mission-critical projects, along with other sector experience including process pharmaceutical, healthcare, commercial, labs and/or clean rooms would be desirable. Role Responsibilities • Responsible for the running of large projects. Undertakes a client facing role in the development and design and coordination of engineering project services for Mechanical or Electrical installations, systems, equipment, facilities etc. (Several building types) • Develops and specifies applications of controls, instruments, and operating systems for all building engineering services purposes • Surveys, tests, carries out dilapidation reports on existing electrical/mechanical installations • Specifies activities to ensure that manufacturing, construction, installation, and operational testing confirm to functional specifications and customer requirements • Day to day decision making on project progress and direct liaison with and provides advice to client • Represents Company at technical meetings with customers, professional teams and contractors teams • Ensures engineering calculations and drawings meet required robust industry and legal standards • Leads on the coordination of engineering services • Takes a holistic view in the selection and application of engineering concepts and solutions Role Requirements You will need to possess the following professional and technical expertise: • BSc/BEng or degree in appropriate engineering discipline or have sufficient equivalent experience • MCIBSE/MIEE or HNC/HND plus appropriate experience or equivalent • Working towards Chartered Eng status • Significant experience of specification design for several building types • Sound knowledge of key Health and Safety issues and legislation • Knowledge of MS Office applications word, excel etc • Ability to use IT based calculation and spreadsheet software • Good understanding of BS standards/ UK Regulations/Codes • Ability to prioritise own workload • Ability to work to deadlines • Managerial skills • Presentation skills • Support the delivery of projects in accordance with the expectations of the Project Delivery Process from a Project Management, Financial Management, QA/QC and Technical Review perspective.

Buyer required for a world-leading precision manufacturing company, providing end-to-end solutions for a diverse range of industries including Defence, Aerospace and many more. With over 60 years experience, this employer has developed a first-class reputation through it's quality deliverables. This role is based in HIGHBURTON, therefore the successful Buyer will be able to commute from surrounding areas including Huddersfield, Mirfield, Dewsbury, Ossett and Horbury for example. Key Responsibilities of the Buyer will include; Manage supplier relationships, monitoring KPIs and driving performance improvements for quality, cost, and delivery. Identify and mitigate supply chain risks, including capacity, geopolitical factors, and single-source dependencies. Negotiate with vendors to secure best value and favourable commercial terms, selecting suppliers based on cost, quality, and reliability. Collaborate with internal teams to resolve procurement issues and support operational requirements. Maintain accurate system data (costs, lead times, compliance) and ensured adherence to export controls and ethical sourcing standards. Control inventory and delivery alignment through daily reporting, balancing customer demand with stock levels and cash flow. Manag end-to-end procurement operations, including PO/RFQ processing, supplier non-conformance resolution, invoice queries, and delivery expediting. For the role of Buyer, we are keen to receive applications from individuals who have; Experience as a Buyer within an Engineering or Manufacturing environment Experience using ERP systems Excellent negotiation and communication skills An understanding of machining and manufacturing processes Salary & Benefits; 43,000 to 47,000 depending on experience Subsidised on-site canteen 33 days annual leave (including public holidays) with the option to buy or sell 3 days Combined pension of up to 19% Profit share scheme - 5% of profit post tax Various medical & well-being perks such as corporate gym membership, health insurance & cash plan, annual eye test & prescription safety glasses and optional annual medical jab. To apply for the Buyer role, please click "Apply Now" and attach a copy of your CV. Alternatively, please contact Alex Feather at E3 Recruitment.

Network Security Engineer Cisco / Palo Alto Manufacturing 450/day - Outside IR35 Contract: Until Sept 2026 (likely extension) Location: Reading (occasional on-site) We're hiring a Network Security Engineer to support a major security transformation programme within a manufacturing environment, reporting into the CISO. The programme is focused on uplifting network security standards in line with NIST Cyber Security Framework (CSF) and CIS Critical Security Controls, across data centres and manufacturing sites. This is a hands-on role focused on improving network security posture across critical infrastructure. Key Responsibilities Conduct network security assessments and gap analysis against NIST CSF and CIS Controls Define and deliver remediation plans across critical environments Design and implement ZTNA and secure access solutions Lead upgrades, testing, pilots, and full deployment Decommission legacy technologies and support transition to BAU Tech Environment Cisco (LAN) Palo Alto (Firewalls, Prisma Access) HPE Aruba (Wireless) SD-WAN, CASB, DLP, ZTNA Requirements Strong Cisco and Palo Alto expertise (essential) Proven experience in network security transformation programmes Experience working with NIST CSF and CIS Critical Security Controls frameworks Experience in manufacturing environments (desirable) Hands-on capability across design, build, and deployment Immediate interviews available - apply now to be considered.

Quality Engineering Manager Salary: Negotiable Direct Reports: 8 10 Location: Coatbridge Sector: Aerospace, Defence & Space The Opportunity We are seeking a Quality Engineering Manager to lead the Quality function within a regulated manufacturing environment. You will be responsible for maintaining and improving the QMS in line with AS9100 and ISO 9001 , supporting the design and manufacture of advanced products for mission-critical applications. The organisation specialises in advanced thermal battery systems and components used in mission-critical aerospace, defence, and space applications. Key Responsibilities: Lead and develop the Quality Engineering team Manage and improve the Quality Management System (QMS) Oversee AS9100 / ISO9001 audits (internal, external, customer) Drive non-conformance management, root cause analysis, and continuous improvement Ensure effective inspection, testing, calibration, and documentation processes Monitor KPIs and lead quality performance reviews Act as key interface for customers, suppliers, and regulators Requirements: Degree in Engineering or Science 10+ years experience in Quality Engineering within AS9100 / ISO9001 environments Strong knowledge of PFMEA/FMECA, 8D, Six Sigma, MSA Experience leading audits and managing QMS in manufacturing Ability to read engineering drawings (GD&T) Strong leadership and communication skills Desirable: Lead Auditor (AS9100 / ISO9001) NEBOSH / IOSH Battery or advanced product knowledge Why Apply? Senior leadership role with real influence Work on cutting-edge aerospace and defence technology Opportunity to drive quality strategy and continuous improvement

My client, one of the best companies in their sector is an expanding international M&E consultancy, with a proven track record in low energy design, focused on providing excellent design solutions to clients. They are looking for a experienced Senior or Principal Mechanical Engineer to be based in our Newcastle office with the ability to inspire others. You will have the ability to run medium sized projects, undertake a client facing role in the development, design and co-ordination of engineering projects. Skills should include experience on data centre and mission critical projects. Other sector experience including commercial, hotel, retail and hotel design desirable. Experience will also include the coordination of engineering project services, with a proven track record in project management. Your excellent communication and interpersonal skills, both with colleagues and clients, and experience working on innovative projects with leading client organisations, and contractors will equip you to take a future pro-active role in forging client relationships of our sector portfolio. You will possess good commercial awareness, in addition to having robust technical knowledge relevant to building services design, and capable of incorporating those technologies into the hotel and leisure sector. The position will ideally suit someone who is currently working in building service consultancy and is prepared to work hands on . The ideal candidate will be a Chartered Engineer or working towards, educated to degree level in Building Services Engineering or equivalent with a minimum of 5 years industry experience. Role Responsibilities • Responsible for running of medium size projects. Undertakes a client facing role in the development and design and coordination of engineering project services for Mechanical installations, systems, equipment, facilities etc. • Develops and specifies applications of controls, instruments, and operating systems for all building engineering services purposes • Surveys tests and reports on existing electrical/mechanical installations • Specifies activities to ensure that manufacturing, construction, installation, and operational testing confirm to functional specifications and customer requirements • Day to day decision making on project progress and direct liaison with and provides advice to client • Represents Company at technical meetings with customers, professional teams and contractors teams • Carries out engineering calculations to ensure drawings meet required robust industry and legal standards • Responsible for technical content and accuracy of Trainee, Graduates and Engineers • Validation and checking of designs and specifications Specific Skills & Knowledge • BEng, MSc, and have sufficient experience • MCIBSE/MIEE or HNC/HND + appropriate experience or equivalent • Working towards Chartered Eng status • Competent in specification design/drawing for several building types • Sound knowledge of key Health and Safety issues and legislation • Knowledge of MS Office applications word, excel etc • Ability to use IT based calculation and spreadsheet software • Good understanding of BS standards • Ability to prioritise own workload • Ability to work to deadlines • Managerial Skills

Electronic Test Operator Initial 12-months Bolton (onsite) 28.35ph, UMB inside IR35 (rising to 29.70ph after 12 weeks) Please note, this role does require SC level Security Clearance and will be working on "UKEO" programmes, meaning the post is only open to sole British nationals due to the nature of work. The Test Operator will be responsible for carrying out test tasks within the operational business, in accordance with product certification procedures, defined workmanship standards, allocated budgets and timescales to meet project objectives. Specific responsibilities include: Certify the product in line with Product Certification procedure. Maintain product certification and approval via regular audits. Possess a versatile skill base with the capability to apply these skills across a range of tasks. Carry out setting-up procedures for testing, to include the awareness of the need for periodic recalibration of test equipment. Carry out tests on electronic equipment in accordance with test instructions, using specified test equipment. Carry out simple fault-finding procedures on electronic equipment. Keep test records and reporting faults for rectification. Ensure manufacturing test times are met. Check and complete all paperwork associated with the manufacturing data pack. Maintain to the highest level, workmanship standards and product quality. Ensure compliance with all associated procedures applicable to the manufacturing process. Maintain a safe working environment. Maintain a good housekeeping policy. Communicate best practice to other team members. The successful candidate should be a team player who is able to demonstrate customer focus. They should also have proven planning and organising skills and be flexible and adaptable. Formal technical engineering/craft apprenticeship to NVQ Level 3/TR23/TR21/ONC. Formal further education certificate to HNC or equivalent certificate. Manual handling training. Lifting & Slinging training (Including overhead cranes). ESD training. No colour blindness. Essenitial Requirements: Electrical Apprenticeship in One Of The Following Approved Apprenticeship/Apprenticeship Framework/Modern Apprenticeship Vocational G or H Units with Further Education, City & Guilds Parts 1, 2 & 3 Vocational TR23 Units with Further Education, ONC or City & Guilds Parts 1, 2 & 3 Vocational NVQ3 with Further Education, BTEC ONC/HNC Qualifications must be in Electrical Manufacturing/Engineering subjects Please only apply if you are able to meet the security clearance resctrictions & hold the relevent qualifactions listed above.

Role: NDT Technician Salary: £39,285 including Shift Allowance + Excellent Benefits Shift Pattern: Day/Night Shifts Rotational (no weekends) Location: Hartlepool GEM Partnership is delighted to be partnering with a leading global manufacturer of solutions for the energy and infrastructure sectors, which has recently acquired a major facility in the North East of England. With a strong order book and robust pipeline of business opportunities, the new owners have already committed to significant CAPEX investment into the North East operation. This represents an exciting opportunity to join a newly established UK operation at the start of a major investment programme that will transform the long-term prospects of both the site and the wider business. As part of a ramp up across their Operations and Engineering functions, the successful candidate will become part of a progressive organisation committed to delivering complex projects for major international clients around the world. The business fosters a working environment where safety, teamwork and the continuous development of its people are central to everything it does. The Role: Deliver Non-Destructive Testing services by conducting inspection and testing of fabricated products in accordance with procedures and industry standards (ISO 9712) Apply multiple scientific principles to identify sub surface flaws or repetitive indications in fabricated products Aspects of non-destructive testing including ultrasonics, radiography and magnetic particle inspection, including visual and dimensional inspection. Perform calibration checks and periodic maintenance on NDT equipment Complete relevant documentation / computer data entry / ad-hoc reports as required Generate Inspection certification Liaise with client inspection teams The Person: NDT qualified to level 2 in accordance with ISO 9712 / PCN / CSWIP Applicants qualified primarily in radiography or ultrasonics with at least one other NDT inspection discipline (MPI / Dye Pen) will also be considered, as will individuals with CSWIP Weld inspection qualifications Equipment calibration and maintenance experience This is a fantastic opportunity for an individual with a desire to be impactful to join an ambitious and rapidly growing business at an exciting time in their evolution, offering a clear pathway for career progression. Benefits include 34 days holiday, employer matched contributory pension scheme, access to life insurance and use of an onsite gym. GEM Partnership is acting as an employment agency on this vacancy. Due to the high volume of applications we receive, we are unable to contact every candidate individually. If you do not hear from us within 7 days of submitting your application, please assume that you have not been shortlisted on this occasion. We are committed to fair, consistent, and inclusive recruitment practices, and all applications are reviewed in line with relevant employment legislation and our equal opportunities principles. To stay safe in your job search we recommend that you visit JobsAware, a non-profit, joint industry and law enforcement organisation working to combat job scams. Visit the JobsAware website to get free, expert advice for safer job search.

Redline has an extraordinary opportunity for multiple Contract Mechanical Technicians based in Oxfordshire, with a specialist scientific company who are at the forefront of groundbreaking scientific experiments. This contract will not accept candidates operating via a PSC, therefore you will be required to work via an Umbrella company. This is a great opportunity to work with technology that you will not find anywhere else in the UK. The company is currently undertaking the biggest project in their history, worth around 500 million and they need you to come on board and help them make it a success. You will be responsible for the upgrade and installation of existing mechanical units and placing them into racks to fit into a bigger machine. Key skills required for the Contract Mechanical Technician position based in Oxfordshire: - Experience in construction, conditioning, testing, installation & commissioning Mechanical Systems - Experience working in high technology or Ultra High Vacuum environment - Recognised Apprenticeship in Mechanical or Electrical Engineering discipline, alternatively significant years of experience For more information or to apply for the Contract Mechanical Technician opportunity based in Oxfordshire, please contact Jack Kelly - (url removed) / (phone number removed) quoting reference JWK1068.

Redline has an extraordinary opportunity for multiple a Contract Vacuum Instrumentation Engineer based in Oxfordshire, with a specialist scientific company who are at the forefront of groundbreaking scientific experiments. This contract will not accept candidates operating via a PSC, therefore you will be required to work via an Umbrella company. This is a great opportunity to work with technology that you will not find anywhere else in the UK. The company is currently undertaking the biggest project in their history, worth around 500 million and they need you to come on board and help them make it a success. You will be responsible for inspection, testing, commissioning of the state of the art vacuum systems which are part of a bigger machine. Key skills required for the Contract Vacuum Instrumentation Engineer based in Oxfordshire: - Practical experience and ability with vacuum or general physics instrumentation and electronics, interfacing, debugging and fault-finding. - Experience with Physics of ultra-high vacuum or accelerator vacuum systems. - Experience with Industrial or accelerator control systems - Practical experience and ability with commissioning, operation and troubleshooting of control instrumentation. For more information or to apply for the Contract Vacuum Instrumentation Engineer opportunity based in Oxfordshire, please contact Jack Kelly - (url removed) / (phone number removed) quoting reference JWK1069.