SG Personnel are working with a market leading manufacturing/engineering business who are looking to recruit a Skilled Maintenance Technician on a permanent basis. Key Accountabilties / Responsibilties: Maintenance & Reliability Maintain, repair and replace plant, equipment, buildings and utilities safely and compliantly. Deliver planned preventative maintenance (PPM) to schedule and diagnose mechanical and electrical faults, implementing effective corrective actions. Ensure equipment meets defined performance standards and escalate non-conformance as required. Complete maintenance records accurately and on time to meet Health & Safety, insurance and ISO requirements. Continuous Improvement & GPS Participate in Grundfos Production System (GPS) activities, including 5S, preventative maintenance and Kaizen. Identify and implement improvements to equipment reliability, safety and process performance. Systems, Communication & Ways of Working Use SAP PM / Nuvolo to manage work orders, time recording and reporting. Communicate effectively with other functions and management to minimise disruption. Plan and prioritise work to support production requirements and agreed timescales. Apprentices & Capability Development Train, coach and support apprentices to develop technical competence and safe working practices. Liaise with supervisors, department heads and HR on training needs and skills development. Contractors & Compliance Coordinate and supervise external contractors on site. Ensure RAMS, permits to work and control measures are in place and followed. Comply with LOTO and Permit to Work procedures. Additional Responsibilities Install, relocate or disconnect plant and equipment as required. Undertake other reasonable duties aligned with the role and terms of employment. The salary ranges from 42,839 to 44,755 depending upon experience.
Jun 13, 2026
Full time
SG Personnel are working with a market leading manufacturing/engineering business who are looking to recruit a Skilled Maintenance Technician on a permanent basis. Key Accountabilties / Responsibilties: Maintenance & Reliability Maintain, repair and replace plant, equipment, buildings and utilities safely and compliantly. Deliver planned preventative maintenance (PPM) to schedule and diagnose mechanical and electrical faults, implementing effective corrective actions. Ensure equipment meets defined performance standards and escalate non-conformance as required. Complete maintenance records accurately and on time to meet Health & Safety, insurance and ISO requirements. Continuous Improvement & GPS Participate in Grundfos Production System (GPS) activities, including 5S, preventative maintenance and Kaizen. Identify and implement improvements to equipment reliability, safety and process performance. Systems, Communication & Ways of Working Use SAP PM / Nuvolo to manage work orders, time recording and reporting. Communicate effectively with other functions and management to minimise disruption. Plan and prioritise work to support production requirements and agreed timescales. Apprentices & Capability Development Train, coach and support apprentices to develop technical competence and safe working practices. Liaise with supervisors, department heads and HR on training needs and skills development. Contractors & Compliance Coordinate and supervise external contractors on site. Ensure RAMS, permits to work and control measures are in place and followed. Comply with LOTO and Permit to Work procedures. Additional Responsibilities Install, relocate or disconnect plant and equipment as required. Undertake other reasonable duties aligned with the role and terms of employment. The salary ranges from 42,839 to 44,755 depending upon experience.
Office Administrator Full Time (12-Month Contract) We are seeking an experienced Office Administrator to support our client based in Birkenhead . This is a full-time, 12-month contract role covering maternity leave. Extensions cannot be guaranteed, but successful candidates may be retained subject to workload. General office hours Monday Friday 8 00. Hourly rate: Up to £15 DOE Further information is given below but we are looking for a minimum of 3 years prior working experience as an Office Administrator or within administration roles - including time spent within invoice processing, document preparation, file maintenance and goods out logistics. Prior SAP experience is mandatory. The client works in the manufacturing sector in a busy plant environment, and some experience in a similar position will be beneficial. Training and support will be provided on an ongoing basis by the current team and plant logistics manager. Experience with SAP is essential for this role. Purpose of the Job You will provide comprehensive office administration support by undertaking clerical, coordination, and logistics-related activities. Key Responsibilities Scanning and managing documents in SAP Checking invoices and sending them to overseas offices Creating delivery documents and haulier programmes (goods out logistics) Creating and dispatching in SAP Ordering relevant stationery Managing accruals and creating PORs Supporting goods out logistics as needed Knowledge, Skills and Experience Minimum of 3 years experience in office administration or similar roles, including invoice processing, document preparation, and file maintenance Proven experience with SAP (mandatory) Proficient in Microsoft Word, Excel, and PowerPoint Strong numeracy and literacy skills Excellent team player with the ability to show initiative and problem-solving skills Experience in a manufacturing or busy plant environment is desirable What We Offer Investment in your professional development A friendly, supportive team environment Easy access to colleagues in planning, logistics, engineering, and management A workplace culture built on mutual respect and appreciation Please note: Duties may occasionally vary and additional reasonable tasks may be assigned. Candidates must have existing eligibility to work in the UK.
Jun 13, 2026
Contractor
Office Administrator Full Time (12-Month Contract) We are seeking an experienced Office Administrator to support our client based in Birkenhead . This is a full-time, 12-month contract role covering maternity leave. Extensions cannot be guaranteed, but successful candidates may be retained subject to workload. General office hours Monday Friday 8 00. Hourly rate: Up to £15 DOE Further information is given below but we are looking for a minimum of 3 years prior working experience as an Office Administrator or within administration roles - including time spent within invoice processing, document preparation, file maintenance and goods out logistics. Prior SAP experience is mandatory. The client works in the manufacturing sector in a busy plant environment, and some experience in a similar position will be beneficial. Training and support will be provided on an ongoing basis by the current team and plant logistics manager. Experience with SAP is essential for this role. Purpose of the Job You will provide comprehensive office administration support by undertaking clerical, coordination, and logistics-related activities. Key Responsibilities Scanning and managing documents in SAP Checking invoices and sending them to overseas offices Creating delivery documents and haulier programmes (goods out logistics) Creating and dispatching in SAP Ordering relevant stationery Managing accruals and creating PORs Supporting goods out logistics as needed Knowledge, Skills and Experience Minimum of 3 years experience in office administration or similar roles, including invoice processing, document preparation, and file maintenance Proven experience with SAP (mandatory) Proficient in Microsoft Word, Excel, and PowerPoint Strong numeracy and literacy skills Excellent team player with the ability to show initiative and problem-solving skills Experience in a manufacturing or busy plant environment is desirable What We Offer Investment in your professional development A friendly, supportive team environment Easy access to colleagues in planning, logistics, engineering, and management A workplace culture built on mutual respect and appreciation Please note: Duties may occasionally vary and additional reasonable tasks may be assigned. Candidates must have existing eligibility to work in the UK.
Senior Manufacturing Engineer Permanent role Based in Ampthill Offering up to 55,000 Do you have experience with 5 Axis CNC Machining? Do you have experience of MRP Systems and managing BOMs? Do you want to work with an industry-leading company? If your answer to these is yes, then this could be the role for you! As the Senior Manufacturing Engineer, you will be working alongside a market-leading Defence and Aerospace company who are constantly growing and developing. They are always looking to bring on new talents such as yourself and further develop your skills to enable you to grow within the company and industry. You will be involved in: Develop manufacturing processes Medium /Large CNC machined components Defining sequence of operations, procedures, and production layouts for assemblies, equipment installation, processing and material handling Providing Basis of Estimates for engineering activities and shop floor operations across a range of technologies and disciplines Identifying any new tooling & fixturing requirements Experienced in the creation of Technical Requirement Specifications Creation of detailed process instructions Creation of Manufacturing BOM's / routings to aid ease of manufacture Active involvement in the Level 1 & 2 Mission Directed Work Team meetings Support and contribute relevant section of the Technology Roadmap to identify improvements to current manufacturing processes and future requirements Assist with the Technical requirements of the relevant section of the Capital plan from definition to acceptance Close liaison of activities with Industrial Engineering, Production Engineering and other functions Support with the business process reviews and generation / update of relevant documentation Your skillset may include: Experience with 5 axis CNC machining and the Hyper-Mill Cam system Experience with CAD software for generating 2D technical drawings Solid understanding of MRP systems and experience managing BOMs and routings in SAP (or similar ERP systems) Proven ability to drive cultural and process change, improving efficiency and quality A collaborative mindset with a passion for continuous improvement If this all sounds like something you will be interested in then simply apply and we can discuss the opportunity further! Senior Manufacturing Engineer Permanent role Based in Ampthill Offering up to 55,000 Disclaimer: This vacancy is being advertised by either Advanced Resource Managers Limited, Advanced Resource Managers IT Limited or Advanced Resource Managers Engineering Limited ("ARM"). ARM is a specialist talent acquisition and management consultancy. We provide technical contingency recruitment and a portfolio of more complex resource solutions. Our specialist recruitment divisions cover the entire technical arena, including some of the most economically and strategically important industries in the UK and the world today. We will never send your CV without your permission.
Jun 13, 2026
Full time
Senior Manufacturing Engineer Permanent role Based in Ampthill Offering up to 55,000 Do you have experience with 5 Axis CNC Machining? Do you have experience of MRP Systems and managing BOMs? Do you want to work with an industry-leading company? If your answer to these is yes, then this could be the role for you! As the Senior Manufacturing Engineer, you will be working alongside a market-leading Defence and Aerospace company who are constantly growing and developing. They are always looking to bring on new talents such as yourself and further develop your skills to enable you to grow within the company and industry. You will be involved in: Develop manufacturing processes Medium /Large CNC machined components Defining sequence of operations, procedures, and production layouts for assemblies, equipment installation, processing and material handling Providing Basis of Estimates for engineering activities and shop floor operations across a range of technologies and disciplines Identifying any new tooling & fixturing requirements Experienced in the creation of Technical Requirement Specifications Creation of detailed process instructions Creation of Manufacturing BOM's / routings to aid ease of manufacture Active involvement in the Level 1 & 2 Mission Directed Work Team meetings Support and contribute relevant section of the Technology Roadmap to identify improvements to current manufacturing processes and future requirements Assist with the Technical requirements of the relevant section of the Capital plan from definition to acceptance Close liaison of activities with Industrial Engineering, Production Engineering and other functions Support with the business process reviews and generation / update of relevant documentation Your skillset may include: Experience with 5 axis CNC machining and the Hyper-Mill Cam system Experience with CAD software for generating 2D technical drawings Solid understanding of MRP systems and experience managing BOMs and routings in SAP (or similar ERP systems) Proven ability to drive cultural and process change, improving efficiency and quality A collaborative mindset with a passion for continuous improvement If this all sounds like something you will be interested in then simply apply and we can discuss the opportunity further! Senior Manufacturing Engineer Permanent role Based in Ampthill Offering up to 55,000 Disclaimer: This vacancy is being advertised by either Advanced Resource Managers Limited, Advanced Resource Managers IT Limited or Advanced Resource Managers Engineering Limited ("ARM"). ARM is a specialist talent acquisition and management consultancy. We provide technical contingency recruitment and a portfolio of more complex resource solutions. Our specialist recruitment divisions cover the entire technical arena, including some of the most economically and strategically important industries in the UK and the world today. We will never send your CV without your permission.
Role: SAP QM Consultant Length: Initial 12-month engagement - view to extend Location: Mainly Remote IR35 Status: Inside IR35 Pay Rate: Competitive Daily Rate One of my defence clients are looking for a SAP QM Consultant to join their team on a contract basis. This opportunity will be for a initial period of 12 months, with a view to extend further. This will be on a remote basis with adhoc travel to site required. KEY SKILLS: 5 Years of hands-on and at least 2 full project lifecycles in SAP Quality Management as a Solution Lead/Consultant, delivering design, configuration and support experience. Proven experience of delivering Quality Management for larger SAP Programmes. Experience of SAP Plant Maintenance and Manufacturing Excellent understanding of business processes and integrations within SAP Production Planning related solutions required to deliver the service. Integration experience with Logistics, Project Systems, Timesheets, HR, Procurement and Supply Chain. KEY RESPONSIBILITIES: Good configuration and process knowledge of Plant Maintenance (PM), Project Systems (PS), Engineering Change Management (ECM), Process Manufacturing (Batch), Product Lifecycle Management (PLM) and SAP MM (including MRP). Excellent configuration, support and business process knowledge of Quality processes and excellent design, configuration, support and business process knowledge of Production and Quality, including Flexible and Production Planning and Plant Maintenance. Ensure compliance to existing standards, and development of required data and reporting standards. Ensure the integrity of the Quality Management configuration in the SAP systems across multiple landscapes. Are you interested in this position? If so, then please respond with your CV and I will be in touch ASAP.
Jun 13, 2026
Contractor
Role: SAP QM Consultant Length: Initial 12-month engagement - view to extend Location: Mainly Remote IR35 Status: Inside IR35 Pay Rate: Competitive Daily Rate One of my defence clients are looking for a SAP QM Consultant to join their team on a contract basis. This opportunity will be for a initial period of 12 months, with a view to extend further. This will be on a remote basis with adhoc travel to site required. KEY SKILLS: 5 Years of hands-on and at least 2 full project lifecycles in SAP Quality Management as a Solution Lead/Consultant, delivering design, configuration and support experience. Proven experience of delivering Quality Management for larger SAP Programmes. Experience of SAP Plant Maintenance and Manufacturing Excellent understanding of business processes and integrations within SAP Production Planning related solutions required to deliver the service. Integration experience with Logistics, Project Systems, Timesheets, HR, Procurement and Supply Chain. KEY RESPONSIBILITIES: Good configuration and process knowledge of Plant Maintenance (PM), Project Systems (PS), Engineering Change Management (ECM), Process Manufacturing (Batch), Product Lifecycle Management (PLM) and SAP MM (including MRP). Excellent configuration, support and business process knowledge of Quality processes and excellent design, configuration, support and business process knowledge of Production and Quality, including Flexible and Production Planning and Plant Maintenance. Ensure compliance to existing standards, and development of required data and reporting standards. Ensure the integrity of the Quality Management configuration in the SAP systems across multiple landscapes. Are you interested in this position? If so, then please respond with your CV and I will be in touch ASAP.
Are you available immediately? We are looking for a Customer Support Administrator to join our superb client on a Temporary basis, starting asap. This is a Temporary role running until the end of July, however, this could be extended. Working in a friendly, supportive team, you will answer first line phone calls from customers looking for technical support. Due to location, candidate will ideally have access to their own transport. Hourly Rate: 12.82 per hour Hours: Full time, 37.5 hours per week. Shifts: 9am - 5:30pm Monday to Friday. What you'll be doing: Provide telephone and email support to customers throughout the UK. Co-ordinate engineer visits to customer sites and escalate service requests. Deal with any concerns over the phone and complete call incident reports. Update and maintain the company database. What we're looking for: Good attitude and communication style when dealing with customers Competent PC user including Microsoft package. Professional approach and customer focused. Car driver Essential unless you live CF23 area. If you're available immediately, looking for a friendly team and work environment to join, and have good PC and customer service skills - we want to hear from you!
Jun 13, 2026
Seasonal
Are you available immediately? We are looking for a Customer Support Administrator to join our superb client on a Temporary basis, starting asap. This is a Temporary role running until the end of July, however, this could be extended. Working in a friendly, supportive team, you will answer first line phone calls from customers looking for technical support. Due to location, candidate will ideally have access to their own transport. Hourly Rate: 12.82 per hour Hours: Full time, 37.5 hours per week. Shifts: 9am - 5:30pm Monday to Friday. What you'll be doing: Provide telephone and email support to customers throughout the UK. Co-ordinate engineer visits to customer sites and escalate service requests. Deal with any concerns over the phone and complete call incident reports. Update and maintain the company database. What we're looking for: Good attitude and communication style when dealing with customers Competent PC user including Microsoft package. Professional approach and customer focused. Car driver Essential unless you live CF23 area. If you're available immediately, looking for a friendly team and work environment to join, and have good PC and customer service skills - we want to hear from you!
This is a dynamic and fast-paced organisation delivering advanced engineering solutions to both domestic and international customers. The business operates across multiple specialist areas, including platform integration, ground-based defence systems, special projects, and weapons programmes, providing a wide range of products and services to defence and security clients. This is an opportunity to join a forward-thinking team offering a challenging and rewarding career, alongside a strong work-life balance, including a 4-day working week (Monday-Thursday) and flexible working arrangements. Job Description The Operations Engineering team supports operational performance and major product development across the full product lifecycle from initial design and prototyping through to production and end-of-life support. This role is focused on improving manufacturing efficiency, reducing costs, and increasing yield at every stage of the lifecycle, directly supporting programme delivery and key milestones. As part of the team, the Manufacturing Engineer acts as a key technical point of contact, providing engineering support, problem-solving, and coordination across both current and future projects. The role drives a proactive "right first time" approach to quality, helping to enhance overall product standards, improve business performance, and reduce manufacturing costs. Develop manufacturing processes. Defining sequence of operations, procedures and production layouts for assemblies, equipment installation, processing and material handling taking into account flow and lean philosophies. Providing Basis of Estimates for engineering activities and shop floor operations across a range of technologies and disciplines. Identifying any new tooling & fixturing requirements. Experienced in the creation of Technical Requirement Specifications. Creation of detailed process instructions. Creation of Manufacturing BOM's / routings to aid ease of manufacture. Active involvement in the Level 1 & 2 MDWT (Mission Directed Work Team) meetings. Support and contribute the relevant section of the Technology Roadmap to identify improvements to current manufacturing processes and future requirements. Assist with the Technical requirements of the relevant section of the Capital plan from definition to acceptance. Close liaison of activities with Industrial Engineering, Production Engineering and other functions as necessary. Support with the business process reviews and generation / update of relevant documentation. Required skills, qualifications and experience We can only consider candidates with current SC Clearance. Detailed Assembly Processing knowledge (Electro Mechanical, Bonding, etc). Knowledge of Lean Manufacturing, Six Sigma and quality improvement tools. Experience with CAD software for generating 2D technical drawings. Solid understanding of MRP systems and experience managing BOMs and routings in SAP (or similar ERP systems). Proven ability to drive cultural and process change, improving efficiency and quality. A collaborative mindset with a passion for continuous improvement. Composite processing knowledge would be beneficial.
Jun 13, 2026
Full time
This is a dynamic and fast-paced organisation delivering advanced engineering solutions to both domestic and international customers. The business operates across multiple specialist areas, including platform integration, ground-based defence systems, special projects, and weapons programmes, providing a wide range of products and services to defence and security clients. This is an opportunity to join a forward-thinking team offering a challenging and rewarding career, alongside a strong work-life balance, including a 4-day working week (Monday-Thursday) and flexible working arrangements. Job Description The Operations Engineering team supports operational performance and major product development across the full product lifecycle from initial design and prototyping through to production and end-of-life support. This role is focused on improving manufacturing efficiency, reducing costs, and increasing yield at every stage of the lifecycle, directly supporting programme delivery and key milestones. As part of the team, the Manufacturing Engineer acts as a key technical point of contact, providing engineering support, problem-solving, and coordination across both current and future projects. The role drives a proactive "right first time" approach to quality, helping to enhance overall product standards, improve business performance, and reduce manufacturing costs. Develop manufacturing processes. Defining sequence of operations, procedures and production layouts for assemblies, equipment installation, processing and material handling taking into account flow and lean philosophies. Providing Basis of Estimates for engineering activities and shop floor operations across a range of technologies and disciplines. Identifying any new tooling & fixturing requirements. Experienced in the creation of Technical Requirement Specifications. Creation of detailed process instructions. Creation of Manufacturing BOM's / routings to aid ease of manufacture. Active involvement in the Level 1 & 2 MDWT (Mission Directed Work Team) meetings. Support and contribute the relevant section of the Technology Roadmap to identify improvements to current manufacturing processes and future requirements. Assist with the Technical requirements of the relevant section of the Capital plan from definition to acceptance. Close liaison of activities with Industrial Engineering, Production Engineering and other functions as necessary. Support with the business process reviews and generation / update of relevant documentation. Required skills, qualifications and experience We can only consider candidates with current SC Clearance. Detailed Assembly Processing knowledge (Electro Mechanical, Bonding, etc). Knowledge of Lean Manufacturing, Six Sigma and quality improvement tools. Experience with CAD software for generating 2D technical drawings. Solid understanding of MRP systems and experience managing BOMs and routings in SAP (or similar ERP systems). Proven ability to drive cultural and process change, improving efficiency and quality. A collaborative mindset with a passion for continuous improvement. Composite processing knowledge would be beneficial.
This is a dynamic and fast-paced organisation delivering advanced engineering solutions to both domestic and international customers. The business operates across multiple specialist areas, including platform integration, ground-based defence systems, special projects, and weapons programmes, providing a wide range of products and services to defence and security clients. This is an opportunity to join a forward-thinking team offering a challenging and rewarding career, alongside a strong work-life balance, including a 4-day working week (Monday-Thursday) and flexible working arrangements. Job Description The Operations Engineering team supports operational performance and major product development across the full product lifecycle from initial design and prototyping through to production and end-of-life support. This role is focused on improving manufacturing efficiency, reducing costs, and increasing yield at every stage of the lifecycle, directly supporting programme delivery and key milestones. As part of the team, the Manufacturing Engineer acts as a key technical point of contact, providing engineering support, problem-solving, and coordination across both current and future projects. The role drives a proactive "right first time" approach to quality, helping to enhance overall product standards, improve business performance, and reduce manufacturing costs. Develop manufacturing processes including but not limited to: Machining and Mechanical Assembly Defining sequence of operations, procedures and production layouts for assemblies, equipment installation, processing and material handling taking into account flow and lean philosophies. Providing Basis of Estimates for engineering activities and shop floor operations across a range of technologies and disciplines. Identifying any new tooling & fixturing requirements. Experienced in the creation of Technical Requirement Specifications. Creation of detailed process instructions. Creation of Manufacturing BOM's / routings to aid ease of manufacture. Active involvement in the Level 1 & 2 MDWT (Mission Directed Work Team) meetings. Support and contribute the relevant section of the Technology Roadmap to identify improvements to current manufacturing processes and future requirements. Assist with the Technical requirements of the relevant section of the Capital plan from definition to acceptance. Close liaison of activities with Industrial Engineering, Production Engineering and other functions as necessary. Support with the business process reviews and generation / update of relevant documentation. Required skills, qualifications and experience We can only consider candidates who already hold SC Clearance Good working knowledge of complex assemblies and New product introduction experience. Knowledge of Lean Manufacturing, Six Sigma and quality improvement tools. Experience with CAD software for generating 2D technical drawings. Solid understanding of MRP systems and experience managing BOMs and routings in SAP (or similar ERP systems). Facility layout experience would be a advantage. Proven ability to drive cultural and process change, improving efficiency and quality. A collaborative mindset with a drive for continuous improvement.
Jun 13, 2026
Full time
This is a dynamic and fast-paced organisation delivering advanced engineering solutions to both domestic and international customers. The business operates across multiple specialist areas, including platform integration, ground-based defence systems, special projects, and weapons programmes, providing a wide range of products and services to defence and security clients. This is an opportunity to join a forward-thinking team offering a challenging and rewarding career, alongside a strong work-life balance, including a 4-day working week (Monday-Thursday) and flexible working arrangements. Job Description The Operations Engineering team supports operational performance and major product development across the full product lifecycle from initial design and prototyping through to production and end-of-life support. This role is focused on improving manufacturing efficiency, reducing costs, and increasing yield at every stage of the lifecycle, directly supporting programme delivery and key milestones. As part of the team, the Manufacturing Engineer acts as a key technical point of contact, providing engineering support, problem-solving, and coordination across both current and future projects. The role drives a proactive "right first time" approach to quality, helping to enhance overall product standards, improve business performance, and reduce manufacturing costs. Develop manufacturing processes including but not limited to: Machining and Mechanical Assembly Defining sequence of operations, procedures and production layouts for assemblies, equipment installation, processing and material handling taking into account flow and lean philosophies. Providing Basis of Estimates for engineering activities and shop floor operations across a range of technologies and disciplines. Identifying any new tooling & fixturing requirements. Experienced in the creation of Technical Requirement Specifications. Creation of detailed process instructions. Creation of Manufacturing BOM's / routings to aid ease of manufacture. Active involvement in the Level 1 & 2 MDWT (Mission Directed Work Team) meetings. Support and contribute the relevant section of the Technology Roadmap to identify improvements to current manufacturing processes and future requirements. Assist with the Technical requirements of the relevant section of the Capital plan from definition to acceptance. Close liaison of activities with Industrial Engineering, Production Engineering and other functions as necessary. Support with the business process reviews and generation / update of relevant documentation. Required skills, qualifications and experience We can only consider candidates who already hold SC Clearance Good working knowledge of complex assemblies and New product introduction experience. Knowledge of Lean Manufacturing, Six Sigma and quality improvement tools. Experience with CAD software for generating 2D technical drawings. Solid understanding of MRP systems and experience managing BOMs and routings in SAP (or similar ERP systems). Facility layout experience would be a advantage. Proven ability to drive cultural and process change, improving efficiency and quality. A collaborative mindset with a drive for continuous improvement.
This is a dynamic and fast-paced organisation delivering advanced engineering solutions to both domestic and international customers. The business operates across multiple specialist areas, including platform integration, ground-based defence systems, special projects, and weapons programmes, providing a wide range of products and services to defence and security clients. This is an opportunity to join a forward-thinking team offering a challenging and rewarding career, alongside a strong work-life balance, including a 4-day working week (Monday-Thursday) and flexible working arrangements. Specific Job Description JP The Operations Engineering team supports operational performance and major product development across the full product lifecycle from initial design and prototyping through to production and end-of-life support. This role is focused on improving manufacturing efficiency, reducing costs, and increasing yield at every stage of the lifecycle, directly supporting programme delivery and key milestones. As part of the team, the Manufacturing Engineer acts as a key technical point of contact, providing engineering support, problem-solving, and coordination across both current and future projects. The role drives a proactive "right first time" approach to quality, helping to enhance overall product standards, improve business performance, and reduce manufacturing costs. Develop manufacturing processes including but not limited to: 5 Axis CNC machining of medium to large components (300mm to 2m) Defining sequence of operations, procedures and production layouts for assemblies, equipment installation, processing and material handling taking into account flow and lean philosophies. Providing Basis of Estimates for engineering activities and shop floor operations across a range of technologies and disciplines. Identifying any new tooling & fixturing requirements. Experienced in the creation of Technical Requirement Specifications. Creation of detailed process instructions. Creation of Manufacturing BOM's / routings to aid ease of manufacture. Active involvement in the Level 1 & 2 MDWT (Mission Directed Work Team) meetings. Support and contribute the relevant section of the Technology Roadmap to identify improvements to current manufacturing processes and future requirements. Assist with the Technical requirements of the relevant section of the Capital plan from definition to acceptance. Close liaison of activities with Industrial Engineering, Production Engineering and other functions as necessary. Support with the business process reviews and generation / update of relevant documentation. Required skills Good working knowledge of CNC Machining, turning and Milling up to 5 axis with Cam software experience or working knowledge of WAAM / Additive Manufacturing. Knowledge of Lean Manufacturing, Six Sigma and quality improvement tools. Experience with CAD software for generating 2D technical drawings. Solid understanding of MRP systems and experience managing BOMs and routings in SAP (or similar ERP systems). Hyper Mill Cam experience would be a advantage. Proven ability to drive cultural and process change, improving efficiency and quality. A collaborative mindset with a passion for continuous improvement.
Jun 13, 2026
Full time
This is a dynamic and fast-paced organisation delivering advanced engineering solutions to both domestic and international customers. The business operates across multiple specialist areas, including platform integration, ground-based defence systems, special projects, and weapons programmes, providing a wide range of products and services to defence and security clients. This is an opportunity to join a forward-thinking team offering a challenging and rewarding career, alongside a strong work-life balance, including a 4-day working week (Monday-Thursday) and flexible working arrangements. Specific Job Description JP The Operations Engineering team supports operational performance and major product development across the full product lifecycle from initial design and prototyping through to production and end-of-life support. This role is focused on improving manufacturing efficiency, reducing costs, and increasing yield at every stage of the lifecycle, directly supporting programme delivery and key milestones. As part of the team, the Manufacturing Engineer acts as a key technical point of contact, providing engineering support, problem-solving, and coordination across both current and future projects. The role drives a proactive "right first time" approach to quality, helping to enhance overall product standards, improve business performance, and reduce manufacturing costs. Develop manufacturing processes including but not limited to: 5 Axis CNC machining of medium to large components (300mm to 2m) Defining sequence of operations, procedures and production layouts for assemblies, equipment installation, processing and material handling taking into account flow and lean philosophies. Providing Basis of Estimates for engineering activities and shop floor operations across a range of technologies and disciplines. Identifying any new tooling & fixturing requirements. Experienced in the creation of Technical Requirement Specifications. Creation of detailed process instructions. Creation of Manufacturing BOM's / routings to aid ease of manufacture. Active involvement in the Level 1 & 2 MDWT (Mission Directed Work Team) meetings. Support and contribute the relevant section of the Technology Roadmap to identify improvements to current manufacturing processes and future requirements. Assist with the Technical requirements of the relevant section of the Capital plan from definition to acceptance. Close liaison of activities with Industrial Engineering, Production Engineering and other functions as necessary. Support with the business process reviews and generation / update of relevant documentation. Required skills Good working knowledge of CNC Machining, turning and Milling up to 5 axis with Cam software experience or working knowledge of WAAM / Additive Manufacturing. Knowledge of Lean Manufacturing, Six Sigma and quality improvement tools. Experience with CAD software for generating 2D technical drawings. Solid understanding of MRP systems and experience managing BOMs and routings in SAP (or similar ERP systems). Hyper Mill Cam experience would be a advantage. Proven ability to drive cultural and process change, improving efficiency and quality. A collaborative mindset with a passion for continuous improvement.
Are you an experienced CNC Programmer? Do you have strong Offline Programming experience within precision manufacturing environments? If so, a global leader within the Aerospace sector is looking to take on board an experienced CNC Programmer on an Outside IR35 contract basis! CNC Programmer Outside IR35 Contract ASAP Start Derby CNC Programmer Job Description: Creating CNC Routing / Turning / Milling programs to support fast turnaround AOG and concession orders on a daily basis Offline programming of CNC machines using ALPHA CAM or equivalent CADCAM software Supporting day-to-day engineering requirements across manufacturing operations Working closely with Group & Site Engineers and Programmers to support production and development activities Understanding, troubleshooting and improving NC programs to maximise efficiency and productivity Identifying continuous improvement opportunities across machining and programming activities CNC Programmer Essential Experience/Skills/Qualifications: Extensive CNC / NC / CADCAM / Offline Programming experience Proven programming experience across CNC Routing, Turning and Milling Ability to read and understand complex engineering drawings Aerospace manufacturing experience preferred, although other precision engineering backgrounds will be considered Proven ALPHA CAM experience or equivalent CADCAM software background Please apply below if this role is of interest!
Jun 12, 2026
Contractor
Are you an experienced CNC Programmer? Do you have strong Offline Programming experience within precision manufacturing environments? If so, a global leader within the Aerospace sector is looking to take on board an experienced CNC Programmer on an Outside IR35 contract basis! CNC Programmer Outside IR35 Contract ASAP Start Derby CNC Programmer Job Description: Creating CNC Routing / Turning / Milling programs to support fast turnaround AOG and concession orders on a daily basis Offline programming of CNC machines using ALPHA CAM or equivalent CADCAM software Supporting day-to-day engineering requirements across manufacturing operations Working closely with Group & Site Engineers and Programmers to support production and development activities Understanding, troubleshooting and improving NC programs to maximise efficiency and productivity Identifying continuous improvement opportunities across machining and programming activities CNC Programmer Essential Experience/Skills/Qualifications: Extensive CNC / NC / CADCAM / Offline Programming experience Proven programming experience across CNC Routing, Turning and Milling Ability to read and understand complex engineering drawings Aerospace manufacturing experience preferred, although other precision engineering backgrounds will be considered Proven ALPHA CAM experience or equivalent CADCAM software background Please apply below if this role is of interest!
Assistant Insite Manager (Temp to Perm Opportunity) Location: Market Drayton Pay Rate: £15.38 per hour Hours: 8:00am - 4:00pm (37.5 hours per week) Start Date: ASAP About the Role We are currently recruiting for an Assistant Insite Manager to join a fast-paced, customer-focused environment on a temp-to-perm basis . This is a varied and hands-on role with plenty of opportunity to make it your own. You will play a key role in delivering an exceptional level of service to customers while also supporting business growth by identifying new opportunities and strengthening existing relationships. Working closely with both customers and suppliers, you'll help ensure the smooth supply of parts, spares, and tooling-keeping operations running efficiently while also supporting commercial performance. Key Responsibilities Manage sales enquiries and process customer orders accurately within internal systems Deputise for the Insite Manager in their absence Maintain and update customer data within internal and customer systems Coordinate and manage work orders from engineering teams Handle customer enquiries including stock availability, pricing, back orders, and delivery queries Prepare and follow up on quotations Build and maintain strong customer relationships to maximise sales and retention Communicate with suppliers regarding stock levels, pricing, and delivery schedules Identify and support opportunities to drive revenue growth and improve margins What We're Looking For Skills & Experience: Previous experience in a customer-facing or sales-driven environment Strong working knowledge of Microsoft Office packages Excellent communication skills with the ability to liaise internally and externally Ability to build relationships with a wide range of stakeholders Strong organisational skills with the ability to meet deadlines and work under pressure Able to work both independently and as part of a team Enthusiastic, flexible, and self-motivated with a proactive approach Desirable (but not essential): Experience within industrial, engineering, or stores environments Knowledge of industrial products, parts, spares, or tooling Full training will be provided for the right candidate. What's on Offer Competitive hourly rate of £15.38 Temp-to-perm opportunity with long-term career potential Varied and engaging role with autonomy to make an impact Opportunity to develop commercial and customer management skills Supportive team environment If you're a driven, customer-focused individual looking to take the next step in your career, we'd love to hear from you. Apply today to start ASAP!
Jun 12, 2026
Seasonal
Assistant Insite Manager (Temp to Perm Opportunity) Location: Market Drayton Pay Rate: £15.38 per hour Hours: 8:00am - 4:00pm (37.5 hours per week) Start Date: ASAP About the Role We are currently recruiting for an Assistant Insite Manager to join a fast-paced, customer-focused environment on a temp-to-perm basis . This is a varied and hands-on role with plenty of opportunity to make it your own. You will play a key role in delivering an exceptional level of service to customers while also supporting business growth by identifying new opportunities and strengthening existing relationships. Working closely with both customers and suppliers, you'll help ensure the smooth supply of parts, spares, and tooling-keeping operations running efficiently while also supporting commercial performance. Key Responsibilities Manage sales enquiries and process customer orders accurately within internal systems Deputise for the Insite Manager in their absence Maintain and update customer data within internal and customer systems Coordinate and manage work orders from engineering teams Handle customer enquiries including stock availability, pricing, back orders, and delivery queries Prepare and follow up on quotations Build and maintain strong customer relationships to maximise sales and retention Communicate with suppliers regarding stock levels, pricing, and delivery schedules Identify and support opportunities to drive revenue growth and improve margins What We're Looking For Skills & Experience: Previous experience in a customer-facing or sales-driven environment Strong working knowledge of Microsoft Office packages Excellent communication skills with the ability to liaise internally and externally Ability to build relationships with a wide range of stakeholders Strong organisational skills with the ability to meet deadlines and work under pressure Able to work both independently and as part of a team Enthusiastic, flexible, and self-motivated with a proactive approach Desirable (but not essential): Experience within industrial, engineering, or stores environments Knowledge of industrial products, parts, spares, or tooling Full training will be provided for the right candidate. What's on Offer Competitive hourly rate of £15.38 Temp-to-perm opportunity with long-term career potential Varied and engaging role with autonomy to make an impact Opportunity to develop commercial and customer management skills Supportive team environment If you're a driven, customer-focused individual looking to take the next step in your career, we'd love to hear from you. Apply today to start ASAP!
SLR Recruitment are looking for multi-skilled labourers to support Installation Engineers on an on going long term basis. Our client is a sealing systems specialist who provide sealing solutions for cable and pipe entries. Their products help protect buildings from water leaks, fire risks, and gas movement. They offer a range of solutions including Rise Duct Seal, Slipsil Sealing Plug, and Nofirno Coated Mineral Wool Boards, all designed to meet safety standards and specific site needs. The client also support customers with training, installation guidance, and technical advice to ensure their systems are fitted and maintained correctly. The role This job role is looking for labourers willing to be mobile and travel around the UK wherever the project takes them. You will be expected to get stuck in and help with all aspects of general labouring whilst keeping the site clean and hazard free. All training will be given to ensure you feel confident on site and learn the neccessary skills to fully assist every project. This job role will put you working closely with the engineers and give you an insight into the job they do which could possibly lead to future development and even a permanent position! CVs will be reviewed and any potential candidates will be asked to attend an interview this can be face to face if local to the head office in Cramlington or via Teams/ WhatsApp Video Call if further away. Must have a valid CSCS Card and a Valid UK Driving License Rates 15.00 per hour weekdays ( Monday to Friday, 10 hours a day) 22.00 Weekend Digs are included if working away plus 22 a day subs Hours Roughly 10-11 hours a day Start: 06:30 Finish:17:00 Contractors will have the use of a company vehicle, so a driving license is an absolute must. If you are interested in this role please get in touch.
Jun 12, 2026
Full time
SLR Recruitment are looking for multi-skilled labourers to support Installation Engineers on an on going long term basis. Our client is a sealing systems specialist who provide sealing solutions for cable and pipe entries. Their products help protect buildings from water leaks, fire risks, and gas movement. They offer a range of solutions including Rise Duct Seal, Slipsil Sealing Plug, and Nofirno Coated Mineral Wool Boards, all designed to meet safety standards and specific site needs. The client also support customers with training, installation guidance, and technical advice to ensure their systems are fitted and maintained correctly. The role This job role is looking for labourers willing to be mobile and travel around the UK wherever the project takes them. You will be expected to get stuck in and help with all aspects of general labouring whilst keeping the site clean and hazard free. All training will be given to ensure you feel confident on site and learn the neccessary skills to fully assist every project. This job role will put you working closely with the engineers and give you an insight into the job they do which could possibly lead to future development and even a permanent position! CVs will be reviewed and any potential candidates will be asked to attend an interview this can be face to face if local to the head office in Cramlington or via Teams/ WhatsApp Video Call if further away. Must have a valid CSCS Card and a Valid UK Driving License Rates 15.00 per hour weekdays ( Monday to Friday, 10 hours a day) 22.00 Weekend Digs are included if working away plus 22 a day subs Hours Roughly 10-11 hours a day Start: 06:30 Finish:17:00 Contractors will have the use of a company vehicle, so a driving license is an absolute must. If you are interested in this role please get in touch.
On behalf of our client, we are seeking to recruit a Manufacturing Assembly & Integration Engineer Lead on an initial 12-month contract basis. As the Manufacturing Assembly & Integration Engineer your focus will be to ensure that our products are built efficiently and to budget. A key member of the Manufacturing Engineering team, you will carry out activities in support of multi-project manufacturing. Role: Manufacturing Assembly & Integration Engineer Pay : 32 - 35 per hour Umbrella rate Location: Bolton Contract: Monday to Friday, 37 hours per week, 12 months IR35 Status: Inside SC Clearance: SC however can start on BPSS Responsibilities Compilation and update of Manufacturing Instructions. Design, Commissioning and proving of associated tooling. Support the industrial validation process using FMEA's, FAI's etc. Resolution of technical problems that may arise during the manufacturing process. Route card changes as a result or rework activities. Management of Configuration Control by the embodiment of Design Modifications into the Manufacturing Instructions. Support to the Non-Conformance Process using SAP. Experience Formal technical Engineering/Craft Apprenticeship to NVQ Level 3/TR23/TR21 and level 3 (ONC) OR Formal further education certificate to HNC or equivalent certificate with experience within an engineering discipline 5 years' experience within an engineering discipline. Can interpret Design Drawings with a view to producing Manufacturing Build Instructions for both Skilled and Semi-Skilled operators. Have experience of Electronic Sub Assembly manufacture through to System level builds. Have experience and knowledge of the assembly process for small/miniature Electro-Mechanical Actuation Systems. Must be able to work within and contribute to a team environment. Recognise and understand customer requirements and respond to them. Understand and work to Company Processes and Procedures. Can communicate both within the working group and at various levels of the organisation. If you are interested in applying for this position and you meet the requirements, please send your updated CV to: Natalie Dalkin at Line Up Aviation Line Up Aviation is a specialist aviation and aerospace recruitment company that has been operating all over the world for more than 30 years. We work with some of the industry's best-known companies and pride ourselves with working to the highest standard of service supported by an ingrained culture of honesty and integrity. " on Twitter for all of our latest vacancies, news and pictures from our busy UK Head Office. Interact with us using the tag at anytime! Thank you for your follow!"
Jun 12, 2026
Contractor
On behalf of our client, we are seeking to recruit a Manufacturing Assembly & Integration Engineer Lead on an initial 12-month contract basis. As the Manufacturing Assembly & Integration Engineer your focus will be to ensure that our products are built efficiently and to budget. A key member of the Manufacturing Engineering team, you will carry out activities in support of multi-project manufacturing. Role: Manufacturing Assembly & Integration Engineer Pay : 32 - 35 per hour Umbrella rate Location: Bolton Contract: Monday to Friday, 37 hours per week, 12 months IR35 Status: Inside SC Clearance: SC however can start on BPSS Responsibilities Compilation and update of Manufacturing Instructions. Design, Commissioning and proving of associated tooling. Support the industrial validation process using FMEA's, FAI's etc. Resolution of technical problems that may arise during the manufacturing process. Route card changes as a result or rework activities. Management of Configuration Control by the embodiment of Design Modifications into the Manufacturing Instructions. Support to the Non-Conformance Process using SAP. Experience Formal technical Engineering/Craft Apprenticeship to NVQ Level 3/TR23/TR21 and level 3 (ONC) OR Formal further education certificate to HNC or equivalent certificate with experience within an engineering discipline 5 years' experience within an engineering discipline. Can interpret Design Drawings with a view to producing Manufacturing Build Instructions for both Skilled and Semi-Skilled operators. Have experience of Electronic Sub Assembly manufacture through to System level builds. Have experience and knowledge of the assembly process for small/miniature Electro-Mechanical Actuation Systems. Must be able to work within and contribute to a team environment. Recognise and understand customer requirements and respond to them. Understand and work to Company Processes and Procedures. Can communicate both within the working group and at various levels of the organisation. If you are interested in applying for this position and you meet the requirements, please send your updated CV to: Natalie Dalkin at Line Up Aviation Line Up Aviation is a specialist aviation and aerospace recruitment company that has been operating all over the world for more than 30 years. We work with some of the industry's best-known companies and pride ourselves with working to the highest standard of service supported by an ingrained culture of honesty and integrity. " on Twitter for all of our latest vacancies, news and pictures from our busy UK Head Office. Interact with us using the tag at anytime! Thank you for your follow!"
Network Engineer - Contract - Inside IR35 - DV Clearance Required We are seeking an experienced Network Engineer to join a secure programme environment on a contract basis. This is a hands-on technical role operating at CCNP level or above (current certification not required but ability must be demonstrable), focused on the design, implementation, and validation of complex physical and virtual network infrastructure in a secure environment. Key Responsibilities: Design, build, and validate physical and virtual networking components across a complex, secure environment Produce and review network design artefacts and supporting engineering documentation Deliver network configuration implementation and testing with a focus on secure, repeatable solutions Perform network monitoring and traffic analysis to maintain performance, security, and service reliability Support hardware and software configuration, life cycle management, and system testing activities Engage with technical and non-technical stakeholders, communicating and justifying proposed solutions effectively What You Will Ideally Bring: Proven network engineering experience operating at CCNP level or above (essential) Hands-on experience with ESXi 8.0.3 and vSphere 8.0.3 (essential) Experience with Cisco Nexus and Cisco IOS XE Leaf and Spine network architecture VXLAN Overlay networks Dual Cloud Dual Hub DMVPN solutions Layer 3 Multicast/PIM Firewall IPS/IDS AAA Management Platforms such as Cisco ISE Desirable: EIGRP routing protocol, QoS and DSCP configuration, VoIP network optimisation, Linux Ubuntu 24.04.4, Cisco Unified Call Manager (CUCM) v15.x, and familiarity with cybersecurity and regulatory compliance requirements Contract Details: Resource Type: Contract - Inside IR35 Rate: £600 per day (Inside IR35) Security Clearance: Active DV Clearance required Start Date: ASAP
Jun 12, 2026
Contractor
Network Engineer - Contract - Inside IR35 - DV Clearance Required We are seeking an experienced Network Engineer to join a secure programme environment on a contract basis. This is a hands-on technical role operating at CCNP level or above (current certification not required but ability must be demonstrable), focused on the design, implementation, and validation of complex physical and virtual network infrastructure in a secure environment. Key Responsibilities: Design, build, and validate physical and virtual networking components across a complex, secure environment Produce and review network design artefacts and supporting engineering documentation Deliver network configuration implementation and testing with a focus on secure, repeatable solutions Perform network monitoring and traffic analysis to maintain performance, security, and service reliability Support hardware and software configuration, life cycle management, and system testing activities Engage with technical and non-technical stakeholders, communicating and justifying proposed solutions effectively What You Will Ideally Bring: Proven network engineering experience operating at CCNP level or above (essential) Hands-on experience with ESXi 8.0.3 and vSphere 8.0.3 (essential) Experience with Cisco Nexus and Cisco IOS XE Leaf and Spine network architecture VXLAN Overlay networks Dual Cloud Dual Hub DMVPN solutions Layer 3 Multicast/PIM Firewall IPS/IDS AAA Management Platforms such as Cisco ISE Desirable: EIGRP routing protocol, QoS and DSCP configuration, VoIP network optimisation, Linux Ubuntu 24.04.4, Cisco Unified Call Manager (CUCM) v15.x, and familiarity with cybersecurity and regulatory compliance requirements Contract Details: Resource Type: Contract - Inside IR35 Rate: £600 per day (Inside IR35) Security Clearance: Active DV Clearance required Start Date: ASAP
Data Scientist (Palantir / FDP essential) - 560/day (Inside IR35) - RemoteYou will require Palantir (FDP) experience as well and UK Citizenship to apply I'm currently looking for an experienced Data Scientist with strong Data Engineering capability to join a high-profile public sector organisation working on a major digital screening programme. This is a genuinely impactful piece of work where you'll be shaping how data is used to drive decisions through modern dashboards and reporting products. What you'll be doing You'll be working as part of an Agile, multidisciplinary team, taking ownership of data exploration and engineering to support new digital services. On a day-to-day basis, you will: Lead exploratory data analysis to understand datasets and inform product decisions Define dashboard requirements and determine what good looks like from a reporting perspective Design and build data pipelines and datasets for dashboards Identify and mitigate data quality risks Develop reusable code in Python and PySpark for data prep and analysis Collaborate closely with Data Engineers, Analysts and UCD professionals Work within modern engineering practices including CI/CD, TDD and DevSecOps Pair programme and contribute to a strong engineering culture What I need from you (essential) To be considered, your CV must clearly show experience with the following: Palantir (FDP) Python PySpark Exploratory Data Analysis Data pipeline design / data engineering concepts Dashboard / reporting dataset development BI tools (Redshift, Databricks or similar) Agile delivery environments If these technologies aren't clearly visible on your CV, you're unlikely to be shortlisted - so please make sure they are easy to find before applying. Nice to have (not essential) Experience within a wider public sector data environment Exposure to screening or clinical datasets What this role IS A hands-on data role blending Data Science and Engineering A chance to influence real-world digital services A collaborative Agile environment working with strong technical teams A role where you'll own problems and drive solutions What this role ISN'T Not a purely academic Data Science position Not a reporting-only / BA-style role Not a role where you'll just "pick up tickets" with no ownership Not suitable if your experience is light on Python, PySpark or Palantir Key Details 560 per day (Inside IR35) Start ASAP Running until November 2026 (extensions very likely) Remote with occasional travel to London Must be a UK National with 5+ years continuous UK residency Next Steps If this aligns with your experience, send me your CV and make sure it clearly highlights the key skills in bold above - that will help fast-track your application. If it looks like a strong match, I'll be in touch quickly to discuss next steps. Hays Specialist Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job you accept the T&C's, Privacy Policy and Disclaimers which can be found at (url removed)
Jun 12, 2026
Contractor
Data Scientist (Palantir / FDP essential) - 560/day (Inside IR35) - RemoteYou will require Palantir (FDP) experience as well and UK Citizenship to apply I'm currently looking for an experienced Data Scientist with strong Data Engineering capability to join a high-profile public sector organisation working on a major digital screening programme. This is a genuinely impactful piece of work where you'll be shaping how data is used to drive decisions through modern dashboards and reporting products. What you'll be doing You'll be working as part of an Agile, multidisciplinary team, taking ownership of data exploration and engineering to support new digital services. On a day-to-day basis, you will: Lead exploratory data analysis to understand datasets and inform product decisions Define dashboard requirements and determine what good looks like from a reporting perspective Design and build data pipelines and datasets for dashboards Identify and mitigate data quality risks Develop reusable code in Python and PySpark for data prep and analysis Collaborate closely with Data Engineers, Analysts and UCD professionals Work within modern engineering practices including CI/CD, TDD and DevSecOps Pair programme and contribute to a strong engineering culture What I need from you (essential) To be considered, your CV must clearly show experience with the following: Palantir (FDP) Python PySpark Exploratory Data Analysis Data pipeline design / data engineering concepts Dashboard / reporting dataset development BI tools (Redshift, Databricks or similar) Agile delivery environments If these technologies aren't clearly visible on your CV, you're unlikely to be shortlisted - so please make sure they are easy to find before applying. Nice to have (not essential) Experience within a wider public sector data environment Exposure to screening or clinical datasets What this role IS A hands-on data role blending Data Science and Engineering A chance to influence real-world digital services A collaborative Agile environment working with strong technical teams A role where you'll own problems and drive solutions What this role ISN'T Not a purely academic Data Science position Not a reporting-only / BA-style role Not a role where you'll just "pick up tickets" with no ownership Not suitable if your experience is light on Python, PySpark or Palantir Key Details 560 per day (Inside IR35) Start ASAP Running until November 2026 (extensions very likely) Remote with occasional travel to London Must be a UK National with 5+ years continuous UK residency Next Steps If this aligns with your experience, send me your CV and make sure it clearly highlights the key skills in bold above - that will help fast-track your application. If it looks like a strong match, I'll be in touch quickly to discuss next steps. Hays Specialist Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job you accept the T&C's, Privacy Policy and Disclaimers which can be found at (url removed)
Talentmark are recruiting for an experienced Maintenance and Asset Coordinator to join a well-established and successful global pharmaceutical company, based in Hatfield, Hertfordshire, on a permanent basis. This is an onsite based role, working 7:30am - 4pm Monday - Friday. Key duties will include: To ensure the effective operation and continuous improvement of the Computerised Maintenance Management System (CMMS), supporting the planning, coordination, and execution of maintenance and facilities activities. To act as a central interface between engineering and operational teams, enabling data-driven decision-making, optimising asset performance, and supporting regulatory compliance. To proactively plan and collaborate with stakeholders to ensure maintenance activities are delivered and closed out on time, in full compliance with GMP standards. Your Background: Proven experience working with CMMS platforms (e.g., Maximo, SAP, Hexagon, Concept) Experience in coordinating with cross-functional teams including engineering, operations, and quality assurance Ability to produce and interpret maintenance performance reports and KPIs Strong understanding of GMP (Good Manufacturing Practice) and Home Office compliance requirements would be an advantage Apply: It is essential that applicants hold entitlement to work in the UK. Please quote job reference (phone number removed) in all correspondence.
Jun 11, 2026
Full time
Talentmark are recruiting for an experienced Maintenance and Asset Coordinator to join a well-established and successful global pharmaceutical company, based in Hatfield, Hertfordshire, on a permanent basis. This is an onsite based role, working 7:30am - 4pm Monday - Friday. Key duties will include: To ensure the effective operation and continuous improvement of the Computerised Maintenance Management System (CMMS), supporting the planning, coordination, and execution of maintenance and facilities activities. To act as a central interface between engineering and operational teams, enabling data-driven decision-making, optimising asset performance, and supporting regulatory compliance. To proactively plan and collaborate with stakeholders to ensure maintenance activities are delivered and closed out on time, in full compliance with GMP standards. Your Background: Proven experience working with CMMS platforms (e.g., Maximo, SAP, Hexagon, Concept) Experience in coordinating with cross-functional teams including engineering, operations, and quality assurance Ability to produce and interpret maintenance performance reports and KPIs Strong understanding of GMP (Good Manufacturing Practice) and Home Office compliance requirements would be an advantage Apply: It is essential that applicants hold entitlement to work in the UK. Please quote job reference (phone number removed) in all correspondence.
Workplace IT Engineer (2nd Line Support) West London Ongoing Temporary Contract ASAP Start 174 per day PAYE or 225 per day Umbrella Full time site based role with as this is supporting the wider members of the team with both hardware and software A West London Local Authority is seeking an experienced Workplace IT Engineer to join their IT & Digital Services team on an ongoing temporary basis. This is a site-based role requiring travel across multiple locations within the borough, so a full UK driving licence is essential. The Role You will provide 2nd line support and deliver high-quality workplace technology services to council staff. This includes supporting hardware, software, and end-user issues both remotely and onsite. Resolve 1st and 2nd line incidents via face-to-face support, telephony, and remote tools Deliver hands-on support across multiple council sites Install, configure, and decommission IT equipment, including cabling and network patching Support print services and liaise with third-party providers (e.g. Ricoh) Manage and prioritise escalations, including VIP support cases Work collaboratively with wider Digital Services teams on issue resolution and projects About You Proven experience in 2nd line IT support within a complex environment Strong troubleshooting skills, including backend analysis Experience supporting hardware, software, and network infrastructure Comfortable working across multiple sites and delivering in-person support Ability to manage priorities and communicate effectively with stakeholders Experience supporting VIP users and handling escalations Full UK driving licence required Additional Information Site-based role across borough locations Ongoing temporary assignment Subject to pre-employment vetting checks
Jun 11, 2026
Seasonal
Workplace IT Engineer (2nd Line Support) West London Ongoing Temporary Contract ASAP Start 174 per day PAYE or 225 per day Umbrella Full time site based role with as this is supporting the wider members of the team with both hardware and software A West London Local Authority is seeking an experienced Workplace IT Engineer to join their IT & Digital Services team on an ongoing temporary basis. This is a site-based role requiring travel across multiple locations within the borough, so a full UK driving licence is essential. The Role You will provide 2nd line support and deliver high-quality workplace technology services to council staff. This includes supporting hardware, software, and end-user issues both remotely and onsite. Resolve 1st and 2nd line incidents via face-to-face support, telephony, and remote tools Deliver hands-on support across multiple council sites Install, configure, and decommission IT equipment, including cabling and network patching Support print services and liaise with third-party providers (e.g. Ricoh) Manage and prioritise escalations, including VIP support cases Work collaboratively with wider Digital Services teams on issue resolution and projects About You Proven experience in 2nd line IT support within a complex environment Strong troubleshooting skills, including backend analysis Experience supporting hardware, software, and network infrastructure Comfortable working across multiple sites and delivering in-person support Ability to manage priorities and communicate effectively with stakeholders Experience supporting VIP users and handling escalations Full UK driving licence required Additional Information Site-based role across borough locations Ongoing temporary assignment Subject to pre-employment vetting checks
Senior Data Analyst - 515/day (Inside IR35) - Remote UK Nationality and Palantir (FDP) are essential to apply for this role I'm currently looking for a Senior Data Analyst / Data Scientist to join a high-impact public sector organisation, working on a major digital screening programme. This is a great opportunity to play a key role in shaping how data is presented, interpreted, and used to inform decisions through high-quality dashboards and reporting products. What you'll be doing You'll be embedded within a collaborative Agile team, working closely with Data Engineers, Data Scientists and UCD professionals to deliver meaningful data products. On a day-to-day basis, you will: Design and develop data dashboards and visualisations Translate user needs into clear metrics, insights and data stories Work closely with stakeholders to understand requirements and refine outputs Validate dashboards and reporting outputs directly with users Support iterative product development in an Agile environment Contribute to a strong engineering culture, including CI/CD, TDD and DevSecOps practices Pair programme and collaborate across multidisciplinary teams What I need from you (essential) To be considered, your CV must clearly show experience with the following: Python and/or BI tools (Power BI, Tableau, Looker Studio) Palantir (FDP) Design and delivery of dashboards / data visualisations Translating user needs into insights and data stories User validation and iterative product delivery Agile delivery environments If these skills aren't clearly visible on your CV, you're unlikely to be shortlisted - so please make sure they are easy to find before applying. Nice to have (not essential) Experience within a wider public sector data environment Exposure to screening or clinical datasets What this role IS A hands-on data visualisation and insight-driven role A chance to influence real digital services used at scale A collaborative, Agile environment with strong technical teams A role where you'll work closely with users and stakeholders What this role ISN'T Not a purely engineering or backend-heavy data role Not a basic reporting role with no user interaction Not suitable if you lack experience in dashboard delivery or Palantir Not a role where you'll work in isolation with no stakeholder engagement Key Details 515 per day (Inside IR35) Start ASAP Contract running until November 2026 (extensions likely) Remote with occasional travel to London Must be a UK National with 5+ years continuous UK residency Next Steps If this aligns with your experience, send me your CV and make sure it clearly highlights the key skills in bold above - this will help fast-track your application. If your experience matches, I'll be in touch quickly to talk through the next steps. Hays Specialist Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job you accept the T&C's, Privacy Policy and Disclaimers which can be found at (url removed)
Jun 11, 2026
Contractor
Senior Data Analyst - 515/day (Inside IR35) - Remote UK Nationality and Palantir (FDP) are essential to apply for this role I'm currently looking for a Senior Data Analyst / Data Scientist to join a high-impact public sector organisation, working on a major digital screening programme. This is a great opportunity to play a key role in shaping how data is presented, interpreted, and used to inform decisions through high-quality dashboards and reporting products. What you'll be doing You'll be embedded within a collaborative Agile team, working closely with Data Engineers, Data Scientists and UCD professionals to deliver meaningful data products. On a day-to-day basis, you will: Design and develop data dashboards and visualisations Translate user needs into clear metrics, insights and data stories Work closely with stakeholders to understand requirements and refine outputs Validate dashboards and reporting outputs directly with users Support iterative product development in an Agile environment Contribute to a strong engineering culture, including CI/CD, TDD and DevSecOps practices Pair programme and collaborate across multidisciplinary teams What I need from you (essential) To be considered, your CV must clearly show experience with the following: Python and/or BI tools (Power BI, Tableau, Looker Studio) Palantir (FDP) Design and delivery of dashboards / data visualisations Translating user needs into insights and data stories User validation and iterative product delivery Agile delivery environments If these skills aren't clearly visible on your CV, you're unlikely to be shortlisted - so please make sure they are easy to find before applying. Nice to have (not essential) Experience within a wider public sector data environment Exposure to screening or clinical datasets What this role IS A hands-on data visualisation and insight-driven role A chance to influence real digital services used at scale A collaborative, Agile environment with strong technical teams A role where you'll work closely with users and stakeholders What this role ISN'T Not a purely engineering or backend-heavy data role Not a basic reporting role with no user interaction Not suitable if you lack experience in dashboard delivery or Palantir Not a role where you'll work in isolation with no stakeholder engagement Key Details 515 per day (Inside IR35) Start ASAP Contract running until November 2026 (extensions likely) Remote with occasional travel to London Must be a UK National with 5+ years continuous UK residency Next Steps If this aligns with your experience, send me your CV and make sure it clearly highlights the key skills in bold above - this will help fast-track your application. If your experience matches, I'll be in touch quickly to talk through the next steps. Hays Specialist Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job you accept the T&C's, Privacy Policy and Disclaimers which can be found at (url removed)
Data Scientist (Palantir/FDP essential) - £560/day (Inside IR35) - RemoteYou will require Palantir (FDP) experience as well and UK Citizenship to apply I'm currently looking for an experienced Data Scientist with strong Data Engineering capability to join a high-profile public sector organisation working on a major digital screening programme. This is a genuinely impactful piece of work where you'll be shaping how data is used to drive decisions through modern dashboards and reporting products. What you'll be doing You'll be working as part of an Agile, multidisciplinary team, taking ownership of data exploration and engineering to support new digital services. On a day-to-day basis, you will: *Lead exploratory data analysis to understand datasets and inform product decisions *Define dashboard requirements and determine what good looks like from a reporting perspective *Design and build data pipelines and datasets for dashboards *Identify and mitigate data quality risks *Develop reusable code in Python and PySpark for data prep and analysis *Collaborate closely with Data Engineers, Analysts and UCD professionals *Work within modern engineering practices including CI/CD, TDD and DevSecOps *Pair programme and contribute to a strong engineering culture What I need from you (essential) To be considered, your CV must clearly show experience with the following: *Palantir (FDP) *Python *PySpark *Exploratory Data Analysis *Data pipeline design/data engineering concepts *Dashboard/reporting dataset development *BI tools (Redshift, Databricks or similar) *Agile delivery environments If these technologies aren't clearly visible on your CV, you're unlikely to be shortlisted - so please make sure they are easy to find before applying. Nice to have (not essential) *Experience within a wider public sector data environment *Exposure to screening or clinical datasets What this role IS *A hands-on data role blending Data Science and Engineering *A chance to influence real-world digital services *A collaborative Agile environment working with strong technical teams *A role where you'll own problems and drive solutions What this role ISN'T *Not a purely academic Data Science position *Not a reporting-only/BA-style role *Not a role where you'll just "pick up tickets" with no ownership *Not suitable if your experience is light on Python, PySpark or Palantir Key Details £560 per day (Inside IR35) Start ASAP Running until November 2026 (extensions very likely) Remote with occasional travel to London Must be a UK National with 5+ years continuous UK residency Next Steps If this aligns with your experience, send me your CV and make sure it clearly highlights the key skills in bold above - that will help fast-track your application. If it looks like a strong match, I'll be in touch quickly to discuss next steps. Hays Specialist Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job you accept the T&C's, Privacy Policy and Disclaimers which can be found on our website.
Jun 11, 2026
Contractor
Data Scientist (Palantir/FDP essential) - £560/day (Inside IR35) - RemoteYou will require Palantir (FDP) experience as well and UK Citizenship to apply I'm currently looking for an experienced Data Scientist with strong Data Engineering capability to join a high-profile public sector organisation working on a major digital screening programme. This is a genuinely impactful piece of work where you'll be shaping how data is used to drive decisions through modern dashboards and reporting products. What you'll be doing You'll be working as part of an Agile, multidisciplinary team, taking ownership of data exploration and engineering to support new digital services. On a day-to-day basis, you will: *Lead exploratory data analysis to understand datasets and inform product decisions *Define dashboard requirements and determine what good looks like from a reporting perspective *Design and build data pipelines and datasets for dashboards *Identify and mitigate data quality risks *Develop reusable code in Python and PySpark for data prep and analysis *Collaborate closely with Data Engineers, Analysts and UCD professionals *Work within modern engineering practices including CI/CD, TDD and DevSecOps *Pair programme and contribute to a strong engineering culture What I need from you (essential) To be considered, your CV must clearly show experience with the following: *Palantir (FDP) *Python *PySpark *Exploratory Data Analysis *Data pipeline design/data engineering concepts *Dashboard/reporting dataset development *BI tools (Redshift, Databricks or similar) *Agile delivery environments If these technologies aren't clearly visible on your CV, you're unlikely to be shortlisted - so please make sure they are easy to find before applying. Nice to have (not essential) *Experience within a wider public sector data environment *Exposure to screening or clinical datasets What this role IS *A hands-on data role blending Data Science and Engineering *A chance to influence real-world digital services *A collaborative Agile environment working with strong technical teams *A role where you'll own problems and drive solutions What this role ISN'T *Not a purely academic Data Science position *Not a reporting-only/BA-style role *Not a role where you'll just "pick up tickets" with no ownership *Not suitable if your experience is light on Python, PySpark or Palantir Key Details £560 per day (Inside IR35) Start ASAP Running until November 2026 (extensions very likely) Remote with occasional travel to London Must be a UK National with 5+ years continuous UK residency Next Steps If this aligns with your experience, send me your CV and make sure it clearly highlights the key skills in bold above - that will help fast-track your application. If it looks like a strong match, I'll be in touch quickly to discuss next steps. Hays Specialist Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job you accept the T&C's, Privacy Policy and Disclaimers which can be found on our website.
Job Title : Finance Manager Location : Maidenhead (Hybrid, 3 days per week in the office) Duration: Permanent Salary : Competitive Salary + Car & Benefits Join a Major Infrastructure Business and Help Drive Finance Systems Excellence An exciting opportunity has arisen for a Finance Manager to join a leading FTSE-listed infrastructure and construction organisation on a permanent basis. This is a highly visible role within the finance function, focused on supporting and developing key finance systems, improving reporting capability, and ensuring robust governance across critical financial processes. Working closely with senior finance stakeholders, you'll play a key role in enhancing systems, supporting business users, and driving continuous improvement initiatives. Key Responsibilities of the Finance Manager Finance Systems Management Act as the key support contact for budgeting, reporting, and timesheet systems Manage system administration, user access, governance, and data integrity Lead the resolution of system issues and coordinate configuration changes Support ongoing system enhancements, upgrades, and process improvements Reporting & Business Insight Work closely with FP&A teams to develop reporting solutions, dashboards, and KPIs Support the delivery of accurate, timely, and meaningful financial information Drive improvements in reporting efficiency and data quality across the business Assist with the development of automated reporting and business intelligence tools Process Improvement & Controls Standardise processes and establish best practice across finance systems Document existing and future-state processes Ensure compliance with financial controls, audit requirements, and governance standards Support data cleansing, validation, and master data management activities Team Leadership Manage and develop a Finance Assistant Provide guidance, coaching, and support to system users across the business Build strong relationships with finance, IT, and operational stakeholders The successful applicant will have: Proven experience in a finance systems, finance transformation, or finance operations role Strong understanding of financial processes including project accounting, WIP, cost allocation, approvals, and timesheet management Experience with finance reporting platforms such as Mercur, Cognos, Power BI, or similar Exposure to ERP systems such as Oracle, SAP, JD Edwards, Dynamics, or equivalent Strong Excel skills including pivot tables, lookups, and data analysis Experience supporting month-end reporting, audit processes, and financial controls Previous experience supervising, mentoring, or developing junior team members Excellent stakeholder management and communication skills Desirable Experience Experience within construction, engineering, infrastructure, or project-based environments Involvement in finance system implementations, upgrades, or transformation projects Knowledge of Oracle or JD Edwards ACA, ACCA, or CIMA qualification, or actively studying towards a professional qualification To be considered for this Finance Manager opportunity, you must APPLY NOW, making sure to attach your up-to-date CV. Only shortlisted candidates will be contacted for an initial telephone interview. If selected from the shortlist, a formal interview process will then begin.
Jun 11, 2026
Full time
Job Title : Finance Manager Location : Maidenhead (Hybrid, 3 days per week in the office) Duration: Permanent Salary : Competitive Salary + Car & Benefits Join a Major Infrastructure Business and Help Drive Finance Systems Excellence An exciting opportunity has arisen for a Finance Manager to join a leading FTSE-listed infrastructure and construction organisation on a permanent basis. This is a highly visible role within the finance function, focused on supporting and developing key finance systems, improving reporting capability, and ensuring robust governance across critical financial processes. Working closely with senior finance stakeholders, you'll play a key role in enhancing systems, supporting business users, and driving continuous improvement initiatives. Key Responsibilities of the Finance Manager Finance Systems Management Act as the key support contact for budgeting, reporting, and timesheet systems Manage system administration, user access, governance, and data integrity Lead the resolution of system issues and coordinate configuration changes Support ongoing system enhancements, upgrades, and process improvements Reporting & Business Insight Work closely with FP&A teams to develop reporting solutions, dashboards, and KPIs Support the delivery of accurate, timely, and meaningful financial information Drive improvements in reporting efficiency and data quality across the business Assist with the development of automated reporting and business intelligence tools Process Improvement & Controls Standardise processes and establish best practice across finance systems Document existing and future-state processes Ensure compliance with financial controls, audit requirements, and governance standards Support data cleansing, validation, and master data management activities Team Leadership Manage and develop a Finance Assistant Provide guidance, coaching, and support to system users across the business Build strong relationships with finance, IT, and operational stakeholders The successful applicant will have: Proven experience in a finance systems, finance transformation, or finance operations role Strong understanding of financial processes including project accounting, WIP, cost allocation, approvals, and timesheet management Experience with finance reporting platforms such as Mercur, Cognos, Power BI, or similar Exposure to ERP systems such as Oracle, SAP, JD Edwards, Dynamics, or equivalent Strong Excel skills including pivot tables, lookups, and data analysis Experience supporting month-end reporting, audit processes, and financial controls Previous experience supervising, mentoring, or developing junior team members Excellent stakeholder management and communication skills Desirable Experience Experience within construction, engineering, infrastructure, or project-based environments Involvement in finance system implementations, upgrades, or transformation projects Knowledge of Oracle or JD Edwards ACA, ACCA, or CIMA qualification, or actively studying towards a professional qualification To be considered for this Finance Manager opportunity, you must APPLY NOW, making sure to attach your up-to-date CV. Only shortlisted candidates will be contacted for an initial telephone interview. If selected from the shortlist, a formal interview process will then begin.
I am recruiting for a BI / AWS Engineer to work on a remote basis with occasional travel to London or Swindon (once a month). The role falls inside IR35 so you will be required to work through an umbrella company for the duration of the contract. I am searching for an experienced Business Intelligence Engineer / AWS Data Engineer to support the development of a modern data platform and contribute to emerging AI-driven initiatives. This role will suit someone with a strong foundation in AWS data engineering and BI, alongside practical exposure to AI/ML concepts or tools. You must have strong hands-on experience in: AWS Data Engineering stack (e.g. Glue, S3, Lambda, Redshift, Athena) SQL (advanced level) Python (for data processing and pipeline development) Infrastructure / tooling exposure (e.g. Terraform, APIs, CI/CD beneficial) Experience working in Business Intelligence / analytics environments Candidates must demonstrate some level of exposure to AI/ML, such as: Working with cloud-based AI services (e.g. AWS Bedrock or similar) Supporting AI-enabled data products or workflows Understanding of generative AI / prompt engineering concepts If your experience matches the above requirements please apply ASAP.
Jun 11, 2026
Contractor
I am recruiting for a BI / AWS Engineer to work on a remote basis with occasional travel to London or Swindon (once a month). The role falls inside IR35 so you will be required to work through an umbrella company for the duration of the contract. I am searching for an experienced Business Intelligence Engineer / AWS Data Engineer to support the development of a modern data platform and contribute to emerging AI-driven initiatives. This role will suit someone with a strong foundation in AWS data engineering and BI, alongside practical exposure to AI/ML concepts or tools. You must have strong hands-on experience in: AWS Data Engineering stack (e.g. Glue, S3, Lambda, Redshift, Athena) SQL (advanced level) Python (for data processing and pipeline development) Infrastructure / tooling exposure (e.g. Terraform, APIs, CI/CD beneficial) Experience working in Business Intelligence / analytics environments Candidates must demonstrate some level of exposure to AI/ML, such as: Working with cloud-based AI services (e.g. AWS Bedrock or similar) Supporting AI-enabled data products or workflows Understanding of generative AI / prompt engineering concepts If your experience matches the above requirements please apply ASAP.
