Software Test Engineer (Contract) Full time on site in Cambridge Inside IR35, Day Rate: 500 9 months duration We are looking for an experienced Principal Software Test Engineer to support the development of customer-facing software for an industry-leading all-optical network switch platform. Please note, you will need experience of networking protocols and testing embedded software to be considered for this positon. Please ensure you live within a commutable distance to Cambridge and hold a valid right to work. Key Responsibilities: Develop and execute test strategies and verification plans Create and maintain automated test frameworks and scripts Perform hardware/software integration testing Troubleshoot software and hardware issues Work with protocols including I2C, UART, SPI and USB Use tools such as oscilloscopes and logic analysers Integrate automated tests into CI/CD pipelines Collaborate with engineering, production, NPI and support teams Produce test documentation, reports and project artefacts Mentor and support other test engineers Required Experience: Solid experience testing embedded software Strong experience with hardware/software integration testing Strong Python programming skills Experience with PyTest and/or Nose Experience with Jenkins or GitLab CI Linux environment and shell scripting experience Strong understanding of unit, integration and end-to-end testing Strong debugging and troubleshooting skills Experience working in Agile/Scrum environments
May 20, 2026
Full time
Software Test Engineer (Contract) Full time on site in Cambridge Inside IR35, Day Rate: 500 9 months duration We are looking for an experienced Principal Software Test Engineer to support the development of customer-facing software for an industry-leading all-optical network switch platform. Please note, you will need experience of networking protocols and testing embedded software to be considered for this positon. Please ensure you live within a commutable distance to Cambridge and hold a valid right to work. Key Responsibilities: Develop and execute test strategies and verification plans Create and maintain automated test frameworks and scripts Perform hardware/software integration testing Troubleshoot software and hardware issues Work with protocols including I2C, UART, SPI and USB Use tools such as oscilloscopes and logic analysers Integrate automated tests into CI/CD pipelines Collaborate with engineering, production, NPI and support teams Produce test documentation, reports and project artefacts Mentor and support other test engineers Required Experience: Solid experience testing embedded software Strong experience with hardware/software integration testing Strong Python programming skills Experience with PyTest and/or Nose Experience with Jenkins or GitLab CI Linux environment and shell scripting experience Strong understanding of unit, integration and end-to-end testing Strong debugging and troubleshooting skills Experience working in Agile/Scrum environments
Robotics Software Engineer (Flight Software) Up to 55,000 (flexible depending on experience) Excellent Benefits Package London / Oxfordshire, UK Hybrid ( 2 days a week from home) Permanent We are looking for a talented Robotics Software Engineer (Flight Software) to join a fast-growing AI and robotics safety startup. The business is continuing to expand its engineering capability as it develops cutting-edge software assurance systems for autonomous and robotics applications. The company is building advanced safety and assurance technology designed to ensure autonomous systems operate safely, predictably, and with optimal performance. Their solutions focus on robotics and AI environments where reliability, safety, and system assurance are critical. This is a fantastic opportunity to work on software that directly powers autonomous robotic systems. You will contribute to the design, development, integration, testing, and optimisation of robotics software components across perception, planning, control, and decision-making systems. We are looking for someone who enjoys working in a startup environment and is motivated by solving complex technical challenges. This role offers the opportunity to work on groundbreaking robotics and AI safety technology while helping shape products from an early stage. Key Responsibilities: Design, build, and integrate robotics software components within the wider product platform Develop algorithms across perception, planning, control, and decision-making Collaborate with embedded software engineers, systems architects, and AI/ML specialists to integrate components into the wider system Assist with testing, validation, optimisation, and reliability improvements Contribute to improving software development processes, tooling, and testing methodologies Stay up to date with the latest robotics software frameworks, tools, and algorithmic developments Key Skills Bachelor's or Master's degree in Computer Science, Aerospace, Robotics, Electrical Engineering, or a related discipline Practical experience in robotics, embedded systems, or autonomous systems Strong proficiency in C/C++ and/or Python Experience with robotics frameworks/tools such as ROS, Gazebo, or MoveIt Strong understanding of robotics concepts including perception, planning, control, and state estimation Experience with modern software development practices including version control, CI, and testing Strong analytical, debugging, and problem-solving skills Ability to work effectively within a multidisciplinary engineering team Must have or be eligible to obtain UK SC clearance Desirable Skills: Knowledge of safety-critical standards such as DO-178C, ISO 26262, or IEC 61508 Experience with simulation environments Experience with robotic hardware integration Aerospace, UAV, defence, or autonomous vehicle experience Startup or scale-up engineering experience What you get in return: Salary up to 55,000 Hybrid working with 2 days a week from home Company pension Cycle to work scheme Work from home flexibility Opportunity to work on industry-leading AI and robotics safety technology The chance to make a real impact on the future of autonomous system assurance This company is an equal opportunity employer and values diversity. They do not discriminate on the basis of race, religion, colour, national origin, gender, sexual orientation, age, marital status, veteran status, or disability status. Interested? Please submit your CV via the link provided. Alternatively, for a confidential discussion about the role, please get in touch directly with (url removed) INDTECH DCS Recruitment and all associated companies are committed to creating a working environment where diversity is celebrated and everyone is treated fairly, regardless of gender, gender identity, disability, ethnic origin, religion or belief, sexual orientation, marital or transgender status, age, or nationality
May 20, 2026
Full time
Robotics Software Engineer (Flight Software) Up to 55,000 (flexible depending on experience) Excellent Benefits Package London / Oxfordshire, UK Hybrid ( 2 days a week from home) Permanent We are looking for a talented Robotics Software Engineer (Flight Software) to join a fast-growing AI and robotics safety startup. The business is continuing to expand its engineering capability as it develops cutting-edge software assurance systems for autonomous and robotics applications. The company is building advanced safety and assurance technology designed to ensure autonomous systems operate safely, predictably, and with optimal performance. Their solutions focus on robotics and AI environments where reliability, safety, and system assurance are critical. This is a fantastic opportunity to work on software that directly powers autonomous robotic systems. You will contribute to the design, development, integration, testing, and optimisation of robotics software components across perception, planning, control, and decision-making systems. We are looking for someone who enjoys working in a startup environment and is motivated by solving complex technical challenges. This role offers the opportunity to work on groundbreaking robotics and AI safety technology while helping shape products from an early stage. Key Responsibilities: Design, build, and integrate robotics software components within the wider product platform Develop algorithms across perception, planning, control, and decision-making Collaborate with embedded software engineers, systems architects, and AI/ML specialists to integrate components into the wider system Assist with testing, validation, optimisation, and reliability improvements Contribute to improving software development processes, tooling, and testing methodologies Stay up to date with the latest robotics software frameworks, tools, and algorithmic developments Key Skills Bachelor's or Master's degree in Computer Science, Aerospace, Robotics, Electrical Engineering, or a related discipline Practical experience in robotics, embedded systems, or autonomous systems Strong proficiency in C/C++ and/or Python Experience with robotics frameworks/tools such as ROS, Gazebo, or MoveIt Strong understanding of robotics concepts including perception, planning, control, and state estimation Experience with modern software development practices including version control, CI, and testing Strong analytical, debugging, and problem-solving skills Ability to work effectively within a multidisciplinary engineering team Must have or be eligible to obtain UK SC clearance Desirable Skills: Knowledge of safety-critical standards such as DO-178C, ISO 26262, or IEC 61508 Experience with simulation environments Experience with robotic hardware integration Aerospace, UAV, defence, or autonomous vehicle experience Startup or scale-up engineering experience What you get in return: Salary up to 55,000 Hybrid working with 2 days a week from home Company pension Cycle to work scheme Work from home flexibility Opportunity to work on industry-leading AI and robotics safety technology The chance to make a real impact on the future of autonomous system assurance This company is an equal opportunity employer and values diversity. They do not discriminate on the basis of race, religion, colour, national origin, gender, sexual orientation, age, marital status, veteran status, or disability status. Interested? Please submit your CV via the link provided. Alternatively, for a confidential discussion about the role, please get in touch directly with (url removed) INDTECH DCS Recruitment and all associated companies are committed to creating a working environment where diversity is celebrated and everyone is treated fairly, regardless of gender, gender identity, disability, ethnic origin, religion or belief, sexual orientation, marital or transgender status, age, or nationality
Principal Civil Engineer Location: Fareham, Hampshire Hours: Monday to Friday, Flexible Opportunity with Core Hours Required Salary: Competitive Holiday: 32 days including bank holidays, Increasing with length of service. Sector: Civil Engineering Our client is a well-established, multi-disciplinary consultancy specialising in transport planning, travel planning, and civil and structural engineering services. The business has grown steadily in recent years and now operates across the UK, supporting both public and private sector clients on a wide range of development and infrastructure projects. They are known for delivering practical, high-quality solutions from early feasibility through to detailed design and project delivery, with a strong emphasis on collaboration and client-focused outcomes. With an experienced and technically strong team, the company provides end-to-end support, combining commercial awareness with in-depth knowledge of current legislation and industry standards. Our client places a strong emphasis on communication, long-term relationships, and continuous improvement, underpinned by their core values of customer focus, openness, results, and excellence. They have built a solid reputation for delivering reliable and innovative engineering solutions that enable successful development across a diverse portfolio of projects nationwide. Position Duties Lead and manage civil engineering projects across drainage, highways, and external works from planning through to construction Oversee and coordinate design teams, including mentoring, appraising, and developing junior staff Plan, allocate, and control resources to ensure efficient project delivery and team performance Produce and review engineering designs, reports, and drawings in line with relevant standards and regulations Collaborate with clients, local authorities, developers, architects, and sub-consultants Manage project budgets, costs, and fee proposals while maintaining commercial awareness Ensure compliance with quality management systems, best practice, and continuous improvement processes Identify and manage design risks, ensuring health, safety, and sustainability are embedded in all projects Attend client meetings and site visits, maintaining strong professional relationships and communication Support business development through client engagement, marketing input, and promotion of the company's services Position Requirements Chartered Engineer (CEng) or Incorporated Engineer (IEng) working towards CEng with the Institution of Civil Engineers A degree or HND in Civil Engineering Background in collaborating with local authorities, developers, and architects on the civil engineering aspects of various schemes Consultancy experience is essential for this position Project management experience in civil engineering, covering schemes that integrate drainage, external works, and highways elements Experience with the design of on- and off-site highway features, in accordance with relevant standards and guidance (e.g. Design Manual for Roads and Bridges, Manual for Streets) Previous experience in delivering drainage designs, highway layouts, and S278/S38 schemes Skilled in the use of AutoCAD and Site 3D, or equivalent 3D design software A thorough understanding of Sewers for Adoption, building regulations, and the SuDS Manual Experience in line management, including conducting appraisals, identifying training requirements, and supporting the performance of junior team members Position Remuneration 5-hour workdays with flexible working hours, with a core hour requirement allowing for lifestyle and work life balance 24 days annual leave, increasing with length of service plus 8 bank holidays Day off on your birthday if it falls on a working day One community or charity day a year to allow you to support the person projects you love Salary sacrifice scheme with the opportunity to purchase or sell annual leave days. Christmas shut down Quarterly and yearly bonus schemes, offering the potential to earn more Private healthcare upon completion of probation period Bike to work scheme Streamline Search is a technical recruitment agency based in Chichester, West Sussex operating across the United Kingdom. We are acting as a Recruitment Agency in relation to this vacancy, and in accordance with GDPR by applying to this post you are granting us consent to process your data and contact you in relation to this application.
May 20, 2026
Full time
Principal Civil Engineer Location: Fareham, Hampshire Hours: Monday to Friday, Flexible Opportunity with Core Hours Required Salary: Competitive Holiday: 32 days including bank holidays, Increasing with length of service. Sector: Civil Engineering Our client is a well-established, multi-disciplinary consultancy specialising in transport planning, travel planning, and civil and structural engineering services. The business has grown steadily in recent years and now operates across the UK, supporting both public and private sector clients on a wide range of development and infrastructure projects. They are known for delivering practical, high-quality solutions from early feasibility through to detailed design and project delivery, with a strong emphasis on collaboration and client-focused outcomes. With an experienced and technically strong team, the company provides end-to-end support, combining commercial awareness with in-depth knowledge of current legislation and industry standards. Our client places a strong emphasis on communication, long-term relationships, and continuous improvement, underpinned by their core values of customer focus, openness, results, and excellence. They have built a solid reputation for delivering reliable and innovative engineering solutions that enable successful development across a diverse portfolio of projects nationwide. Position Duties Lead and manage civil engineering projects across drainage, highways, and external works from planning through to construction Oversee and coordinate design teams, including mentoring, appraising, and developing junior staff Plan, allocate, and control resources to ensure efficient project delivery and team performance Produce and review engineering designs, reports, and drawings in line with relevant standards and regulations Collaborate with clients, local authorities, developers, architects, and sub-consultants Manage project budgets, costs, and fee proposals while maintaining commercial awareness Ensure compliance with quality management systems, best practice, and continuous improvement processes Identify and manage design risks, ensuring health, safety, and sustainability are embedded in all projects Attend client meetings and site visits, maintaining strong professional relationships and communication Support business development through client engagement, marketing input, and promotion of the company's services Position Requirements Chartered Engineer (CEng) or Incorporated Engineer (IEng) working towards CEng with the Institution of Civil Engineers A degree or HND in Civil Engineering Background in collaborating with local authorities, developers, and architects on the civil engineering aspects of various schemes Consultancy experience is essential for this position Project management experience in civil engineering, covering schemes that integrate drainage, external works, and highways elements Experience with the design of on- and off-site highway features, in accordance with relevant standards and guidance (e.g. Design Manual for Roads and Bridges, Manual for Streets) Previous experience in delivering drainage designs, highway layouts, and S278/S38 schemes Skilled in the use of AutoCAD and Site 3D, or equivalent 3D design software A thorough understanding of Sewers for Adoption, building regulations, and the SuDS Manual Experience in line management, including conducting appraisals, identifying training requirements, and supporting the performance of junior team members Position Remuneration 5-hour workdays with flexible working hours, with a core hour requirement allowing for lifestyle and work life balance 24 days annual leave, increasing with length of service plus 8 bank holidays Day off on your birthday if it falls on a working day One community or charity day a year to allow you to support the person projects you love Salary sacrifice scheme with the opportunity to purchase or sell annual leave days. Christmas shut down Quarterly and yearly bonus schemes, offering the potential to earn more Private healthcare upon completion of probation period Bike to work scheme Streamline Search is a technical recruitment agency based in Chichester, West Sussex operating across the United Kingdom. We are acting as a Recruitment Agency in relation to this vacancy, and in accordance with GDPR by applying to this post you are granting us consent to process your data and contact you in relation to this application.
AI Product Engineer (Full Stack / AI Systems) We are building a new generation of AI-powered products and are looking for a hands-on AI Product Engineer to help design, build, and scale intelligent systems in production. This is not a pure research or infrastructure role. We are looking for someone who can bridge product thinking, software engineering, and real-world AI system behaviour, turning ideas into reliable, production-ready features used at scale. You will work across the full stack, with a strong focus on building AI-driven user-facing features, debugging LLM behaviour in production, and shaping how AI is embedded into real products. Key responsibilities Design and build AI-powered product features end-to-end (frontend, backend, and AI layer) Work with LLMs in production environments, including prompt design, tuning, and debugging AI behaviour Investigate and resolve production issues such as hallucinations, incorrect outputs, and context injection failures Build scalable backend services and APIs using modern cloud infrastructure C#, .NET Experience Develop responsive frontend applications and translate product designs into working interfaces Work with event-driven and distributed systems where required Collaborate closely with product, engineering, and operations teams to deliver customer-facing AI features Contribute to system design decisions including scalability, observability, and reliability What we're looking for Strong full-stack engineering experience (frontend + backend development) Experience building or shipping AI/LLM-powered features in production Understanding of prompt engineering, LLM behaviour, and AI failure modes (e.g. drift, hallucination, context issues) Experience working with cloud platforms (AWS or Azure) Strong backend engineering skills (APIs, data flow, system design) Comfortable debugging complex production issues across distributed systems Ability to work with frontend engineers and product teams collaboratively Strong curiosity and product mindset - asking the right questions, not just writing code Desirable experience RAG (Retrieval-Augmented Generation) systems or agent-based AI workflows Kubernetes or containerised deployment environments Event-driven architectures and scalable system design Experience translating UI/UX designs (e.g. Figma) into production frontend code Familiarity with Vue, React, or similar frameworks Exposure to enterprise-scale AI or data-heavy applications What sets this role apart You will be working directly on real AI systems in production, not prototypes You will be expected to debug AI behaviour, not just infrastructure issues You will own the full journey from idea product feature production AI system You will help shape how AI is embedded into core product experiences What we offer Competitive salary (based on experience) Hybrid working model Opportunity to work on cutting-edge AI product development High autonomy and influence over technical direction Exposure to modern AI tooling and agent-based development workflow Interested? Please Click Apply Now! AI Product Engineer (Full Stack / AI Systems)
May 20, 2026
Full time
AI Product Engineer (Full Stack / AI Systems) We are building a new generation of AI-powered products and are looking for a hands-on AI Product Engineer to help design, build, and scale intelligent systems in production. This is not a pure research or infrastructure role. We are looking for someone who can bridge product thinking, software engineering, and real-world AI system behaviour, turning ideas into reliable, production-ready features used at scale. You will work across the full stack, with a strong focus on building AI-driven user-facing features, debugging LLM behaviour in production, and shaping how AI is embedded into real products. Key responsibilities Design and build AI-powered product features end-to-end (frontend, backend, and AI layer) Work with LLMs in production environments, including prompt design, tuning, and debugging AI behaviour Investigate and resolve production issues such as hallucinations, incorrect outputs, and context injection failures Build scalable backend services and APIs using modern cloud infrastructure C#, .NET Experience Develop responsive frontend applications and translate product designs into working interfaces Work with event-driven and distributed systems where required Collaborate closely with product, engineering, and operations teams to deliver customer-facing AI features Contribute to system design decisions including scalability, observability, and reliability What we're looking for Strong full-stack engineering experience (frontend + backend development) Experience building or shipping AI/LLM-powered features in production Understanding of prompt engineering, LLM behaviour, and AI failure modes (e.g. drift, hallucination, context issues) Experience working with cloud platforms (AWS or Azure) Strong backend engineering skills (APIs, data flow, system design) Comfortable debugging complex production issues across distributed systems Ability to work with frontend engineers and product teams collaboratively Strong curiosity and product mindset - asking the right questions, not just writing code Desirable experience RAG (Retrieval-Augmented Generation) systems or agent-based AI workflows Kubernetes or containerised deployment environments Event-driven architectures and scalable system design Experience translating UI/UX designs (e.g. Figma) into production frontend code Familiarity with Vue, React, or similar frameworks Exposure to enterprise-scale AI or data-heavy applications What sets this role apart You will be working directly on real AI systems in production, not prototypes You will be expected to debug AI behaviour, not just infrastructure issues You will own the full journey from idea product feature production AI system You will help shape how AI is embedded into core product experiences What we offer Competitive salary (based on experience) Hybrid working model Opportunity to work on cutting-edge AI product development High autonomy and influence over technical direction Exposure to modern AI tooling and agent-based development workflow Interested? Please Click Apply Now! AI Product Engineer (Full Stack / AI Systems)
Software Engineer - TypeScript / Next.js / SQL A growing technology-led business is rebuilding and modernising its core systems including operational workflows, integrations, reporting, customer tooling, and internal platforms. These systems play an important role in supporting day-to-day operations, service delivery, and business decision-making across the organisation. This role is ideal for someone who enjoys solving technical and operational problems, working across interconnected systems, and building reliable software in a collaborative engineering environment. AI-assisted development tools such as Claude Code and Cursor are already embedded into the team s workflow, and engineers are encouraged to use them to improve delivery efficiency while applying strong technical judgement. What You ll Be Doing Building and improving business-critical applications and internal systems Developing features across frontend and backend services using TypeScript, Next.js, and NestJS Supporting integrations, operational workflows, and customer-facing functionality Working closely with engineering, operations, and support teams to solve technical challenges Investigating bugs, edge cases, and data-related issues Writing scalable, maintainable, and reliable code Contributing to improvements in system reliability, documentation, and engineering practices Using AI-assisted development tools as part of day-to-day development workflows What They re Looking For Essential Commercial experience with TypeScript across frontend and backend development Experience with Next.js, NestJS, and modern web application architecture Strong SQL and data modelling skills, ideally PostgreSQL Experience working on production systems and business applications Good understanding of APIs, system integrations, and data flows Strong problem-solving and communication skills Ability to work collaboratively across technical and non-technical teams Desirable Go experience Experience with cloud infrastructure and API integrations Exposure to operational, finance, or data-heavy systems Familiarity with AI development tools such as Claude Code or Cursor Experience working in fast-paced product or operational environments Salary & Benefits Up to £55,000 depending on experience 25 days holiday + bank holidays Flexible working arrangements 3 days office / 2 days remote Opportunity to work on systems central to business operations Interested? Please click Apply Now! Software Engineer - TypeScript / Next.js / SQL
May 20, 2026
Full time
Software Engineer - TypeScript / Next.js / SQL A growing technology-led business is rebuilding and modernising its core systems including operational workflows, integrations, reporting, customer tooling, and internal platforms. These systems play an important role in supporting day-to-day operations, service delivery, and business decision-making across the organisation. This role is ideal for someone who enjoys solving technical and operational problems, working across interconnected systems, and building reliable software in a collaborative engineering environment. AI-assisted development tools such as Claude Code and Cursor are already embedded into the team s workflow, and engineers are encouraged to use them to improve delivery efficiency while applying strong technical judgement. What You ll Be Doing Building and improving business-critical applications and internal systems Developing features across frontend and backend services using TypeScript, Next.js, and NestJS Supporting integrations, operational workflows, and customer-facing functionality Working closely with engineering, operations, and support teams to solve technical challenges Investigating bugs, edge cases, and data-related issues Writing scalable, maintainable, and reliable code Contributing to improvements in system reliability, documentation, and engineering practices Using AI-assisted development tools as part of day-to-day development workflows What They re Looking For Essential Commercial experience with TypeScript across frontend and backend development Experience with Next.js, NestJS, and modern web application architecture Strong SQL and data modelling skills, ideally PostgreSQL Experience working on production systems and business applications Good understanding of APIs, system integrations, and data flows Strong problem-solving and communication skills Ability to work collaboratively across technical and non-technical teams Desirable Go experience Experience with cloud infrastructure and API integrations Exposure to operational, finance, or data-heavy systems Familiarity with AI development tools such as Claude Code or Cursor Experience working in fast-paced product or operational environments Salary & Benefits Up to £55,000 depending on experience 25 days holiday + bank holidays Flexible working arrangements 3 days office / 2 days remote Opportunity to work on systems central to business operations Interested? Please click Apply Now! Software Engineer - TypeScript / Next.js / SQL
About Us DTC A Codan Company is a technology company based in Whiteley, Hampshire. We specialise in the research and development of wireless and critical RF communication systems. Our Engineers work at the edge of what is scientifically possible, using every advancement in technology to our advantage. Our technology is deployed by our customers to give them an unrivalled ability to wirelessly transmit data over long ranges with high reliability and security. We are well established across multiple markets such as military and defence, uncrewed vehicles such as drones, police and government, and broadcast technology. About the Role At DTC, our Embedded Engineers enjoy a varied role with a steady stream of challenging new projects to work on. We have ongoing growth in our embedded team and will be seeking to hire multiple Engineers with experence in embedded C++ and/or C for low-level Linux kernel device drivers. If you have experience in DSP or VHDL/FPGA, those skills will be put to good use, or could be developed as part of your ongoing training and professional development. Most of our Embedded Engineers enjoy getting hands-on with hardware as well, although we do have a dedicated Hardware and RF Team who take care of most of the heavy lifting. Why work at DTC We celebrate and recognise success, take pride in our culture, and enjoy working alongside highly skilled colleagues on ground-breaking technology that fuels the continued success of the business. We offer a flexible working environment, competitive salaries, a great benefits package, and ensure that our Engineers receive world-class training and development. Interested in finding out more? Click apply today and we will contact suitable candidates for an informal discussion. Successful applicants will need to be able to undergo Security Clearance, although employment can commence prior to this being obtained.
May 20, 2026
Full time
About Us DTC A Codan Company is a technology company based in Whiteley, Hampshire. We specialise in the research and development of wireless and critical RF communication systems. Our Engineers work at the edge of what is scientifically possible, using every advancement in technology to our advantage. Our technology is deployed by our customers to give them an unrivalled ability to wirelessly transmit data over long ranges with high reliability and security. We are well established across multiple markets such as military and defence, uncrewed vehicles such as drones, police and government, and broadcast technology. About the Role At DTC, our Embedded Engineers enjoy a varied role with a steady stream of challenging new projects to work on. We have ongoing growth in our embedded team and will be seeking to hire multiple Engineers with experence in embedded C++ and/or C for low-level Linux kernel device drivers. If you have experience in DSP or VHDL/FPGA, those skills will be put to good use, or could be developed as part of your ongoing training and professional development. Most of our Embedded Engineers enjoy getting hands-on with hardware as well, although we do have a dedicated Hardware and RF Team who take care of most of the heavy lifting. Why work at DTC We celebrate and recognise success, take pride in our culture, and enjoy working alongside highly skilled colleagues on ground-breaking technology that fuels the continued success of the business. We offer a flexible working environment, competitive salaries, a great benefits package, and ensure that our Engineers receive world-class training and development. Interested in finding out more? Click apply today and we will contact suitable candidates for an informal discussion. Successful applicants will need to be able to undergo Security Clearance, although employment can commence prior to this being obtained.
Software/Firmware Engineer - Kent - 40K- 55K My Client is a growing, established company operating in a regulated, quality-driven sector. They are looking for an innovative software/firmware engineer to assist in developing and improving embedded systems, with emphasis on robust testing, validation, and raising overall engineering and software quality standards. The Role: Develop and maintain embedded software and firmware across multiple product lines Design and support structured testing and validation approaches for embedded and application software Work closely with electronics, mechanical, and systems engineering teams Contribute to design reviews, stand-ups, and wider engineering discussions About You: Strong background in embedded or low-level software development Experience in software testing, verification, or validation Proficient in C, C++, and/or C# Familiar with test planning, structured test environments, and software lifecycle processes Able to work independently and collaborate across disciplines If this sounds like you - please apply below! Please note that security clearance is required for this role, so no sponsorship is available.
May 20, 2026
Full time
Software/Firmware Engineer - Kent - 40K- 55K My Client is a growing, established company operating in a regulated, quality-driven sector. They are looking for an innovative software/firmware engineer to assist in developing and improving embedded systems, with emphasis on robust testing, validation, and raising overall engineering and software quality standards. The Role: Develop and maintain embedded software and firmware across multiple product lines Design and support structured testing and validation approaches for embedded and application software Work closely with electronics, mechanical, and systems engineering teams Contribute to design reviews, stand-ups, and wider engineering discussions About You: Strong background in embedded or low-level software development Experience in software testing, verification, or validation Proficient in C, C++, and/or C# Familiar with test planning, structured test environments, and software lifecycle processes Able to work independently and collaborate across disciplines If this sounds like you - please apply below! Please note that security clearance is required for this role, so no sponsorship is available.
Nordson Test & Inspection, a global leader in world-class metrology equipment and inspection systems, is seeking a motivated and talented Graduate Junior Electronics Engineer to join our team in Colchester, United Kingdom. Summary of the role You will be responsible for designing electronics hardware associated with X-ray imaging components. You will have the opportunity to contribute to the full lifecycle, from initial concept to product including design, development, test and production support. You will be supported by an experienced team to develop your Electronics Engineering abilities and the personal skills needed to thrive in a high technology engineering team. There is the opportunity for skills rotation through other disciplines such as software development, mechatronics and IC design. As a member of our team, you will have the opportunity to work in a dynamic and collaborative environment, where your ideas and contributions will be valued and respected. We are committed to creating a diverse and inclusive workplace, and we are looking for candidates who share that same commitment. Role and Responsibilities PCB design including some high-speed elements. PCB layout constraints and analysis. High voltage (200 KV) PSU design. Embedded Firmware and HDL development. Technical documentation. Verification at board and system level. Skills and Qualifications Bachelor's or Master's degree in Electronics Engineering or a related field. Knowledge of analogue/digital circuit design, power electronics, and embedded systems. Good communication and interpersonal skills, willingness to learn and be flexible to change. Experience with Analogue circuit design (e.g. LTSpice etc) and testing. Knowledge of PCB CAD tools (e.g. Altium etc) is preferred Knowledge of FPGA design using VHDL/Verilog, including simulation and verification, is preferred Travel Some travel to Nordson sites both in the UK and overseas. Less than 5% Benefits We offer a flexible work schedule, a comprehensive benefits package, and opportunities for growth and development. Our benefits do further include: Company Healthcare Scheme after successful completion of probationary period (3 months) Group Personal Pension Plan - 4% minimum employee contribution, 6% employer contribution after successful completion of probationary period (3 months) 25 days annual holiday entitlement, plus public holidays About Nordson Test & Inspection Nordson Test & Inspection manufactures world-class metrology equipment and inspection systems to ensure electronic products are built to meet the highest standards. We use X-ray inspection, acoustic imaging, and optical inspection technologies to create testing systems that enable the identification of even the smallest defects at high resolution. By joining our team today, you will help us bring innovative ideas to life. Nordson Test & Inspection is a global team that works to create machines and systems that improve the manufacturing process for a wide range of industries, including electronics, aerospace, automotive, energy, lighting, and medical. We offer a supportive culture in a growing and dynamic work environment. Whether you're just beginning your career or you're a seasoned professional, there's a place for you to belong at Nordson Test & Inspection. We offer hourly and salary positions in production, maintenance, customer service, quality, engineering, and more. We actively invest in our teams to help you build your skillsets and advance your career. Our recruitment process is designed to identify the best qualified candidates for the role, and we are committed to ensuring a fair and equitable interview process. We are looking for candidates who have a passion for inclusion, diversity and equity, and the ability to contribute to a culture where all employees feel valued, respected, and included. Interested? If you are interested in being a part of a team that is dedicated to providing advanced inspection and testing solutions and creating an inclusive and diverse workplace, please apply online with your CV.
May 20, 2026
Full time
Nordson Test & Inspection, a global leader in world-class metrology equipment and inspection systems, is seeking a motivated and talented Graduate Junior Electronics Engineer to join our team in Colchester, United Kingdom. Summary of the role You will be responsible for designing electronics hardware associated with X-ray imaging components. You will have the opportunity to contribute to the full lifecycle, from initial concept to product including design, development, test and production support. You will be supported by an experienced team to develop your Electronics Engineering abilities and the personal skills needed to thrive in a high technology engineering team. There is the opportunity for skills rotation through other disciplines such as software development, mechatronics and IC design. As a member of our team, you will have the opportunity to work in a dynamic and collaborative environment, where your ideas and contributions will be valued and respected. We are committed to creating a diverse and inclusive workplace, and we are looking for candidates who share that same commitment. Role and Responsibilities PCB design including some high-speed elements. PCB layout constraints and analysis. High voltage (200 KV) PSU design. Embedded Firmware and HDL development. Technical documentation. Verification at board and system level. Skills and Qualifications Bachelor's or Master's degree in Electronics Engineering or a related field. Knowledge of analogue/digital circuit design, power electronics, and embedded systems. Good communication and interpersonal skills, willingness to learn and be flexible to change. Experience with Analogue circuit design (e.g. LTSpice etc) and testing. Knowledge of PCB CAD tools (e.g. Altium etc) is preferred Knowledge of FPGA design using VHDL/Verilog, including simulation and verification, is preferred Travel Some travel to Nordson sites both in the UK and overseas. Less than 5% Benefits We offer a flexible work schedule, a comprehensive benefits package, and opportunities for growth and development. Our benefits do further include: Company Healthcare Scheme after successful completion of probationary period (3 months) Group Personal Pension Plan - 4% minimum employee contribution, 6% employer contribution after successful completion of probationary period (3 months) 25 days annual holiday entitlement, plus public holidays About Nordson Test & Inspection Nordson Test & Inspection manufactures world-class metrology equipment and inspection systems to ensure electronic products are built to meet the highest standards. We use X-ray inspection, acoustic imaging, and optical inspection technologies to create testing systems that enable the identification of even the smallest defects at high resolution. By joining our team today, you will help us bring innovative ideas to life. Nordson Test & Inspection is a global team that works to create machines and systems that improve the manufacturing process for a wide range of industries, including electronics, aerospace, automotive, energy, lighting, and medical. We offer a supportive culture in a growing and dynamic work environment. Whether you're just beginning your career or you're a seasoned professional, there's a place for you to belong at Nordson Test & Inspection. We offer hourly and salary positions in production, maintenance, customer service, quality, engineering, and more. We actively invest in our teams to help you build your skillsets and advance your career. Our recruitment process is designed to identify the best qualified candidates for the role, and we are committed to ensuring a fair and equitable interview process. We are looking for candidates who have a passion for inclusion, diversity and equity, and the ability to contribute to a culture where all employees feel valued, respected, and included. Interested? If you are interested in being a part of a team that is dedicated to providing advanced inspection and testing solutions and creating an inclusive and diverse workplace, please apply online with your CV.
Nordson Test & Inspection, a global leader in world-class metrology equipment and inspection systems, is seeking a motivated and talented Graduate Junior Electronics Engineer to join our team in Colchester, United Kingdom. Summary of the role You will be responsible for designing electronics hardware associated with X-ray imaging components. You will have the opportunity to contribute to the full lifecycle, from initial concept to product including design, development, test and production support. You will be supported by an experienced team to develop your Electronics Engineering abilities and the personal skills needed to thrive in a high technology engineering team. There is the opportunity for skills rotation through other disciplines such as software development, mechatronics and IC design. As a member of our team, you will have the opportunity to work in a dynamic and collaborative environment, where your ideas and contributions will be valued and respected. We are committed to creating a diverse and inclusive workplace, and we are looking for candidates who share that same commitment. Role and Responsibilities PCB design including some high-speed elements. PCB layout constraints and analysis. High voltage (200 KV) PSU design. Embedded Firmware and HDL development. Technical documentation. Verification at board and system level. Skills and Qualifications Bachelor's or Master's degree in Electronics Engineering or a related field. Knowledge of analogue/digital circuit design, power electronics, and embedded systems. Good communication and interpersonal skills, willingness to learn and be flexible to change. Experience with Analogue circuit design (e.g. LTSpice etc) and testing. Knowledge of PCB CAD tools (e.g. Altium etc) is preferred Knowledge of FPGA design using VHDL/Verilog, including simulation and verification, is preferred Travel Some travel to Nordson sites both in the UK and overseas. Less than 5% Benefits We offer a flexible work schedule, a comprehensive benefits package, and opportunities for growth and development. Our benefits do further include: Company Healthcare Scheme after successful completion of probationary period (3 months) Group Personal Pension Plan - 4% minimum employee contribution, 6% employer contribution after successful completion of probationary period (3 months) 25 days annual holiday entitlement, plus public holidays About Nordson Test & Inspection Nordson Test & Inspection manufactures world-class metrology equipment and inspection systems to ensure electronic products are built to meet the highest standards. We use X-ray inspection, acoustic imaging, and optical inspection technologies to create testing systems that enable the identification of even the smallest defects at high resolution. By joining our team today, you will help us bring innovative ideas to life. Nordson Test & Inspection is a global team that works to create machines and systems that improve the manufacturing process for a wide range of industries, including electronics, aerospace, automotive, energy, lighting, and medical. We offer a supportive culture in a growing and dynamic work environment. Whether you're just beginning your career or you're a seasoned professional, there's a place for you to belong at Nordson Test & Inspection. We offer hourly and salary positions in production, maintenance, customer service, quality, engineering, and more. We actively invest in our teams to help you build your skillsets and advance your career. Our recruitment process is designed to identify the best qualified candidates for the role, and we are committed to ensuring a fair and equitable interview process. We are looking for candidates who have a passion for inclusion, diversity and equity, and the ability to contribute to a culture where all employees feel valued, respected, and included. Interested? If you are interested in being a part of a team that is dedicated to providing advanced inspection and testing solutions and creating an inclusive and diverse workplace, please apply online with your CV.
May 20, 2026
Full time
Nordson Test & Inspection, a global leader in world-class metrology equipment and inspection systems, is seeking a motivated and talented Graduate Junior Electronics Engineer to join our team in Colchester, United Kingdom. Summary of the role You will be responsible for designing electronics hardware associated with X-ray imaging components. You will have the opportunity to contribute to the full lifecycle, from initial concept to product including design, development, test and production support. You will be supported by an experienced team to develop your Electronics Engineering abilities and the personal skills needed to thrive in a high technology engineering team. There is the opportunity for skills rotation through other disciplines such as software development, mechatronics and IC design. As a member of our team, you will have the opportunity to work in a dynamic and collaborative environment, where your ideas and contributions will be valued and respected. We are committed to creating a diverse and inclusive workplace, and we are looking for candidates who share that same commitment. Role and Responsibilities PCB design including some high-speed elements. PCB layout constraints and analysis. High voltage (200 KV) PSU design. Embedded Firmware and HDL development. Technical documentation. Verification at board and system level. Skills and Qualifications Bachelor's or Master's degree in Electronics Engineering or a related field. Knowledge of analogue/digital circuit design, power electronics, and embedded systems. Good communication and interpersonal skills, willingness to learn and be flexible to change. Experience with Analogue circuit design (e.g. LTSpice etc) and testing. Knowledge of PCB CAD tools (e.g. Altium etc) is preferred Knowledge of FPGA design using VHDL/Verilog, including simulation and verification, is preferred Travel Some travel to Nordson sites both in the UK and overseas. Less than 5% Benefits We offer a flexible work schedule, a comprehensive benefits package, and opportunities for growth and development. Our benefits do further include: Company Healthcare Scheme after successful completion of probationary period (3 months) Group Personal Pension Plan - 4% minimum employee contribution, 6% employer contribution after successful completion of probationary period (3 months) 25 days annual holiday entitlement, plus public holidays About Nordson Test & Inspection Nordson Test & Inspection manufactures world-class metrology equipment and inspection systems to ensure electronic products are built to meet the highest standards. We use X-ray inspection, acoustic imaging, and optical inspection technologies to create testing systems that enable the identification of even the smallest defects at high resolution. By joining our team today, you will help us bring innovative ideas to life. Nordson Test & Inspection is a global team that works to create machines and systems that improve the manufacturing process for a wide range of industries, including electronics, aerospace, automotive, energy, lighting, and medical. We offer a supportive culture in a growing and dynamic work environment. Whether you're just beginning your career or you're a seasoned professional, there's a place for you to belong at Nordson Test & Inspection. We offer hourly and salary positions in production, maintenance, customer service, quality, engineering, and more. We actively invest in our teams to help you build your skillsets and advance your career. Our recruitment process is designed to identify the best qualified candidates for the role, and we are committed to ensuring a fair and equitable interview process. We are looking for candidates who have a passion for inclusion, diversity and equity, and the ability to contribute to a culture where all employees feel valued, respected, and included. Interested? If you are interested in being a part of a team that is dedicated to providing advanced inspection and testing solutions and creating an inclusive and diverse workplace, please apply online with your CV.
Nordson Test & Inspection, a global leader in world-class metrology equipment and inspection systems, is seeking a motivated and talented Graduate Junior Electronics Engineer to join our team in Colchester, United Kingdom. Summary of the role You will be responsible for designing electronics hardware associated with X-ray imaging components. You will have the opportunity to contribute to the full lifecycle, from initial concept to product including design, development, test and production support. You will be supported by an experienced team to develop your Electronics Engineering abilities and the personal skills needed to thrive in a high technology engineering team. There is the opportunity for skills rotation through other disciplines such as software development, mechatronics and IC design. As a member of our team, you will have the opportunity to work in a dynamic and collaborative environment, where your ideas and contributions will be valued and respected. We are committed to creating a diverse and inclusive workplace, and we are looking for candidates who share that same commitment. Role and Responsibilities PCB design including some high-speed elements. PCB layout constraints and analysis. High voltage (200 KV) PSU design. Embedded Firmware and HDL development. Technical documentation. Verification at board and system level. Skills and Qualifications Bachelor's or Master's degree in Electronics Engineering or a related field. Knowledge of analogue/digital circuit design, power electronics, and embedded systems. Good communication and interpersonal skills, willingness to learn and be flexible to change. Experience with Analogue circuit design (e.g. LTSpice etc) and testing. Knowledge of PCB CAD tools (e.g. Altium etc) is preferred Knowledge of FPGA design using VHDL/Verilog, including simulation and verification, is preferred Travel Some travel to Nordson sites both in the UK and overseas. Less than 5% Benefits We offer a flexible work schedule, a comprehensive benefits package, and opportunities for growth and development. Our benefits do further include: Company Healthcare Scheme after successful completion of probationary period (3 months) Group Personal Pension Plan - 4% minimum employee contribution, 6% employer contribution after successful completion of probationary period (3 months) 25 days annual holiday entitlement, plus public holidays About Nordson Test & Inspection Nordson Test & Inspection manufactures world-class metrology equipment and inspection systems to ensure electronic products are built to meet the highest standards. We use X-ray inspection, acoustic imaging, and optical inspection technologies to create testing systems that enable the identification of even the smallest defects at high resolution. By joining our team today, you will help us bring innovative ideas to life. Nordson Test & Inspection is a global team that works to create machines and systems that improve the manufacturing process for a wide range of industries, including electronics, aerospace, automotive, energy, lighting, and medical. We offer a supportive culture in a growing and dynamic work environment. Whether you're just beginning your career or you're a seasoned professional, there's a place for you to belong at Nordson Test & Inspection. We offer hourly and salary positions in production, maintenance, customer service, quality, engineering, and more. We actively invest in our teams to help you build your skillsets and advance your career. Our recruitment process is designed to identify the best qualified candidates for the role, and we are committed to ensuring a fair and equitable interview process. We are looking for candidates who have a passion for inclusion, diversity and equity, and the ability to contribute to a culture where all employees feel valued, respected, and included. Interested? If you are interested in being a part of a team that is dedicated to providing advanced inspection and testing solutions and creating an inclusive and diverse workplace, please apply online with your CV.
May 20, 2026
Full time
Nordson Test & Inspection, a global leader in world-class metrology equipment and inspection systems, is seeking a motivated and talented Graduate Junior Electronics Engineer to join our team in Colchester, United Kingdom. Summary of the role You will be responsible for designing electronics hardware associated with X-ray imaging components. You will have the opportunity to contribute to the full lifecycle, from initial concept to product including design, development, test and production support. You will be supported by an experienced team to develop your Electronics Engineering abilities and the personal skills needed to thrive in a high technology engineering team. There is the opportunity for skills rotation through other disciplines such as software development, mechatronics and IC design. As a member of our team, you will have the opportunity to work in a dynamic and collaborative environment, where your ideas and contributions will be valued and respected. We are committed to creating a diverse and inclusive workplace, and we are looking for candidates who share that same commitment. Role and Responsibilities PCB design including some high-speed elements. PCB layout constraints and analysis. High voltage (200 KV) PSU design. Embedded Firmware and HDL development. Technical documentation. Verification at board and system level. Skills and Qualifications Bachelor's or Master's degree in Electronics Engineering or a related field. Knowledge of analogue/digital circuit design, power electronics, and embedded systems. Good communication and interpersonal skills, willingness to learn and be flexible to change. Experience with Analogue circuit design (e.g. LTSpice etc) and testing. Knowledge of PCB CAD tools (e.g. Altium etc) is preferred Knowledge of FPGA design using VHDL/Verilog, including simulation and verification, is preferred Travel Some travel to Nordson sites both in the UK and overseas. Less than 5% Benefits We offer a flexible work schedule, a comprehensive benefits package, and opportunities for growth and development. Our benefits do further include: Company Healthcare Scheme after successful completion of probationary period (3 months) Group Personal Pension Plan - 4% minimum employee contribution, 6% employer contribution after successful completion of probationary period (3 months) 25 days annual holiday entitlement, plus public holidays About Nordson Test & Inspection Nordson Test & Inspection manufactures world-class metrology equipment and inspection systems to ensure electronic products are built to meet the highest standards. We use X-ray inspection, acoustic imaging, and optical inspection technologies to create testing systems that enable the identification of even the smallest defects at high resolution. By joining our team today, you will help us bring innovative ideas to life. Nordson Test & Inspection is a global team that works to create machines and systems that improve the manufacturing process for a wide range of industries, including electronics, aerospace, automotive, energy, lighting, and medical. We offer a supportive culture in a growing and dynamic work environment. Whether you're just beginning your career or you're a seasoned professional, there's a place for you to belong at Nordson Test & Inspection. We offer hourly and salary positions in production, maintenance, customer service, quality, engineering, and more. We actively invest in our teams to help you build your skillsets and advance your career. Our recruitment process is designed to identify the best qualified candidates for the role, and we are committed to ensuring a fair and equitable interview process. We are looking for candidates who have a passion for inclusion, diversity and equity, and the ability to contribute to a culture where all employees feel valued, respected, and included. Interested? If you are interested in being a part of a team that is dedicated to providing advanced inspection and testing solutions and creating an inclusive and diverse workplace, please apply online with your CV.
Nordson Test & Inspection, a global leader in world-class metrology equipment and inspection systems, is seeking a motivated and talented Graduate Junior Electronics Engineer to join our team in Colchester, United Kingdom. Summary of the role You will be responsible for designing electronics hardware associated with X-ray imaging components. You will have the opportunity to contribute to the full lifecycle, from initial concept to product including design, development, test and production support. You will be supported by an experienced team to develop your Electronics Engineering abilities and the personal skills needed to thrive in a high technology engineering team. There is the opportunity for skills rotation through other disciplines such as software development, mechatronics and IC design. As a member of our team, you will have the opportunity to work in a dynamic and collaborative environment, where your ideas and contributions will be valued and respected. We are committed to creating a diverse and inclusive workplace, and we are looking for candidates who share that same commitment. Role and Responsibilities PCB design including some high-speed elements. PCB layout constraints and analysis. High voltage (200 KV) PSU design. Embedded Firmware and HDL development. Technical documentation. Verification at board and system level. Skills and Qualifications Bachelor's or Master's degree in Electronics Engineering or a related field. Knowledge of analogue/digital circuit design, power electronics, and embedded systems. Good communication and interpersonal skills, willingness to learn and be flexible to change. Experience with Analogue circuit design (e.g. LTSpice etc) and testing. Knowledge of PCB CAD tools (e.g. Altium etc) is preferred Knowledge of FPGA design using VHDL/Verilog, including simulation and verification, is preferred Travel Some travel to Nordson sites both in the UK and overseas. Less than 5% Benefits We offer a flexible work schedule, a comprehensive benefits package, and opportunities for growth and development. Our benefits do further include: Company Healthcare Scheme after successful completion of probationary period (3 months) Group Personal Pension Plan - 4% minimum employee contribution, 6% employer contribution after successful completion of probationary period (3 months) 25 days annual holiday entitlement, plus public holidays About Nordson Test & Inspection Nordson Test & Inspection manufactures world-class metrology equipment and inspection systems to ensure electronic products are built to meet the highest standards. We use X-ray inspection, acoustic imaging, and optical inspection technologies to create testing systems that enable the identification of even the smallest defects at high resolution. By joining our team today, you will help us bring innovative ideas to life. Nordson Test & Inspection is a global team that works to create machines and systems that improve the manufacturing process for a wide range of industries, including electronics, aerospace, automotive, energy, lighting, and medical. We offer a supportive culture in a growing and dynamic work environment. Whether you're just beginning your career or you're a seasoned professional, there's a place for you to belong at Nordson Test & Inspection. We offer hourly and salary positions in production, maintenance, customer service, quality, engineering, and more. We actively invest in our teams to help you build your skillsets and advance your career. Our recruitment process is designed to identify the best qualified candidates for the role, and we are committed to ensuring a fair and equitable interview process. We are looking for candidates who have a passion for inclusion, diversity and equity, and the ability to contribute to a culture where all employees feel valued, respected, and included. Interested? If you are interested in being a part of a team that is dedicated to providing advanced inspection and testing solutions and creating an inclusive and diverse workplace, please apply online with your CV.
May 20, 2026
Full time
Nordson Test & Inspection, a global leader in world-class metrology equipment and inspection systems, is seeking a motivated and talented Graduate Junior Electronics Engineer to join our team in Colchester, United Kingdom. Summary of the role You will be responsible for designing electronics hardware associated with X-ray imaging components. You will have the opportunity to contribute to the full lifecycle, from initial concept to product including design, development, test and production support. You will be supported by an experienced team to develop your Electronics Engineering abilities and the personal skills needed to thrive in a high technology engineering team. There is the opportunity for skills rotation through other disciplines such as software development, mechatronics and IC design. As a member of our team, you will have the opportunity to work in a dynamic and collaborative environment, where your ideas and contributions will be valued and respected. We are committed to creating a diverse and inclusive workplace, and we are looking for candidates who share that same commitment. Role and Responsibilities PCB design including some high-speed elements. PCB layout constraints and analysis. High voltage (200 KV) PSU design. Embedded Firmware and HDL development. Technical documentation. Verification at board and system level. Skills and Qualifications Bachelor's or Master's degree in Electronics Engineering or a related field. Knowledge of analogue/digital circuit design, power electronics, and embedded systems. Good communication and interpersonal skills, willingness to learn and be flexible to change. Experience with Analogue circuit design (e.g. LTSpice etc) and testing. Knowledge of PCB CAD tools (e.g. Altium etc) is preferred Knowledge of FPGA design using VHDL/Verilog, including simulation and verification, is preferred Travel Some travel to Nordson sites both in the UK and overseas. Less than 5% Benefits We offer a flexible work schedule, a comprehensive benefits package, and opportunities for growth and development. Our benefits do further include: Company Healthcare Scheme after successful completion of probationary period (3 months) Group Personal Pension Plan - 4% minimum employee contribution, 6% employer contribution after successful completion of probationary period (3 months) 25 days annual holiday entitlement, plus public holidays About Nordson Test & Inspection Nordson Test & Inspection manufactures world-class metrology equipment and inspection systems to ensure electronic products are built to meet the highest standards. We use X-ray inspection, acoustic imaging, and optical inspection technologies to create testing systems that enable the identification of even the smallest defects at high resolution. By joining our team today, you will help us bring innovative ideas to life. Nordson Test & Inspection is a global team that works to create machines and systems that improve the manufacturing process for a wide range of industries, including electronics, aerospace, automotive, energy, lighting, and medical. We offer a supportive culture in a growing and dynamic work environment. Whether you're just beginning your career or you're a seasoned professional, there's a place for you to belong at Nordson Test & Inspection. We offer hourly and salary positions in production, maintenance, customer service, quality, engineering, and more. We actively invest in our teams to help you build your skillsets and advance your career. Our recruitment process is designed to identify the best qualified candidates for the role, and we are committed to ensuring a fair and equitable interview process. We are looking for candidates who have a passion for inclusion, diversity and equity, and the ability to contribute to a culture where all employees feel valued, respected, and included. Interested? If you are interested in being a part of a team that is dedicated to providing advanced inspection and testing solutions and creating an inclusive and diverse workplace, please apply online with your CV.
Nordson Test & Inspection, a global leader in world-class metrology equipment and inspection systems, is seeking a motivated and talented Graduate Junior Electronics Engineer to join our team in Colchester, United Kingdom. Summary of the role You will be responsible for designing electronics hardware associated with X-ray imaging components. You will have the opportunity to contribute to the full lifecycle, from initial concept to product including design, development, test and production support. You will be supported by an experienced team to develop your Electronics Engineering abilities and the personal skills needed to thrive in a high technology engineering team. There is the opportunity for skills rotation through other disciplines such as software development, mechatronics and IC design. As a member of our team, you will have the opportunity to work in a dynamic and collaborative environment, where your ideas and contributions will be valued and respected. We are committed to creating a diverse and inclusive workplace, and we are looking for candidates who share that same commitment. Role and Responsibilities PCB design including some high-speed elements. PCB layout constraints and analysis. High voltage (200 KV) PSU design. Embedded Firmware and HDL development. Technical documentation. Verification at board and system level. Skills and Qualifications Bachelor's or Master's degree in Electronics Engineering or a related field. Knowledge of analogue/digital circuit design, power electronics, and embedded systems. Good communication and interpersonal skills, willingness to learn and be flexible to change. Experience with Analogue circuit design (e.g. LTSpice etc) and testing. Knowledge of PCB CAD tools (e.g. Altium etc) is preferred Knowledge of FPGA design using VHDL/Verilog, including simulation and verification, is preferred Travel Some travel to Nordson sites both in the UK and overseas. Less than 5% Benefits We offer a flexible work schedule, a comprehensive benefits package, and opportunities for growth and development. Our benefits do further include: Company Healthcare Scheme after successful completion of probationary period (3 months) Group Personal Pension Plan - 4% minimum employee contribution, 6% employer contribution after successful completion of probationary period (3 months) 25 days annual holiday entitlement, plus public holidays About Nordson Test & Inspection Nordson Test & Inspection manufactures world-class metrology equipment and inspection systems to ensure electronic products are built to meet the highest standards. We use X-ray inspection, acoustic imaging, and optical inspection technologies to create testing systems that enable the identification of even the smallest defects at high resolution. By joining our team today, you will help us bring innovative ideas to life. Nordson Test & Inspection is a global team that works to create machines and systems that improve the manufacturing process for a wide range of industries, including electronics, aerospace, automotive, energy, lighting, and medical. We offer a supportive culture in a growing and dynamic work environment. Whether you're just beginning your career or you're a seasoned professional, there's a place for you to belong at Nordson Test & Inspection. We offer hourly and salary positions in production, maintenance, customer service, quality, engineering, and more. We actively invest in our teams to help you build your skillsets and advance your career. Our recruitment process is designed to identify the best qualified candidates for the role, and we are committed to ensuring a fair and equitable interview process. We are looking for candidates who have a passion for inclusion, diversity and equity, and the ability to contribute to a culture where all employees feel valued, respected, and included. Interested? If you are interested in being a part of a team that is dedicated to providing advanced inspection and testing solutions and creating an inclusive and diverse workplace, please apply online with your CV.
May 20, 2026
Full time
Nordson Test & Inspection, a global leader in world-class metrology equipment and inspection systems, is seeking a motivated and talented Graduate Junior Electronics Engineer to join our team in Colchester, United Kingdom. Summary of the role You will be responsible for designing electronics hardware associated with X-ray imaging components. You will have the opportunity to contribute to the full lifecycle, from initial concept to product including design, development, test and production support. You will be supported by an experienced team to develop your Electronics Engineering abilities and the personal skills needed to thrive in a high technology engineering team. There is the opportunity for skills rotation through other disciplines such as software development, mechatronics and IC design. As a member of our team, you will have the opportunity to work in a dynamic and collaborative environment, where your ideas and contributions will be valued and respected. We are committed to creating a diverse and inclusive workplace, and we are looking for candidates who share that same commitment. Role and Responsibilities PCB design including some high-speed elements. PCB layout constraints and analysis. High voltage (200 KV) PSU design. Embedded Firmware and HDL development. Technical documentation. Verification at board and system level. Skills and Qualifications Bachelor's or Master's degree in Electronics Engineering or a related field. Knowledge of analogue/digital circuit design, power electronics, and embedded systems. Good communication and interpersonal skills, willingness to learn and be flexible to change. Experience with Analogue circuit design (e.g. LTSpice etc) and testing. Knowledge of PCB CAD tools (e.g. Altium etc) is preferred Knowledge of FPGA design using VHDL/Verilog, including simulation and verification, is preferred Travel Some travel to Nordson sites both in the UK and overseas. Less than 5% Benefits We offer a flexible work schedule, a comprehensive benefits package, and opportunities for growth and development. Our benefits do further include: Company Healthcare Scheme after successful completion of probationary period (3 months) Group Personal Pension Plan - 4% minimum employee contribution, 6% employer contribution after successful completion of probationary period (3 months) 25 days annual holiday entitlement, plus public holidays About Nordson Test & Inspection Nordson Test & Inspection manufactures world-class metrology equipment and inspection systems to ensure electronic products are built to meet the highest standards. We use X-ray inspection, acoustic imaging, and optical inspection technologies to create testing systems that enable the identification of even the smallest defects at high resolution. By joining our team today, you will help us bring innovative ideas to life. Nordson Test & Inspection is a global team that works to create machines and systems that improve the manufacturing process for a wide range of industries, including electronics, aerospace, automotive, energy, lighting, and medical. We offer a supportive culture in a growing and dynamic work environment. Whether you're just beginning your career or you're a seasoned professional, there's a place for you to belong at Nordson Test & Inspection. We offer hourly and salary positions in production, maintenance, customer service, quality, engineering, and more. We actively invest in our teams to help you build your skillsets and advance your career. Our recruitment process is designed to identify the best qualified candidates for the role, and we are committed to ensuring a fair and equitable interview process. We are looking for candidates who have a passion for inclusion, diversity and equity, and the ability to contribute to a culture where all employees feel valued, respected, and included. Interested? If you are interested in being a part of a team that is dedicated to providing advanced inspection and testing solutions and creating an inclusive and diverse workplace, please apply online with your CV.
Get Staffed Online Recruitment Limited
Bristol, Gloucestershire
Senior Firmware Engineer Location: Bristol; Hybrid Join our client as a Senior Firmware Engineer! Are you a passionate Firmware Engineer wanting to make a real impact by giving a voice to those without speech? Our client is looking for a dedicated individual to help improve the lives of people with disabilities. Your Impact As our client s Senior Firmware Engineer, you will: Technical Project Delivery: Deliver multi disciplinary projects, meeting scope, time, budget and quality requirements, and coordinating others as needed. Firmware Architecture and Lifecycle: Develop reliable, portable firmware with a long-life cycle. Firmware Development: Design, develop and maintain embedded firmware in C for Zephyr RTOS and Embedded Linux, including board bring up, drivers and HALs. Code Quality and Standards: Set and uphold coding, documentation and review standards, ensuring best practices in architecture, modularity, fault tolerance and testability. Test strategy and Automation: Apply strong automated testing practices following the Test Pyramid, including unit, component, contract and hardware in the loop tests, with CI automation to prevent regressions. Test Software and Tooling: Build and maintain automated test harnesses, GUIs and utility tools (e.g. Python, C#) to support development, validation and manufacturing. Libraries and Developer Experience: Create libraries and demo applications in C compatible languages (C#, C++) to support subsystem validation and cross team integration. Verification and Validation: EAD verification through lab testing, user trials and real world use, ensuring documentation supports regulatory compliance. Quality Assurance: Analyse and resolve quality issues promptly, feeding insights back into designs and processes to drive continuous improvement. Technical Strategy: Contribute to strategy for reliable, mission critical firmware, clearly communicating trade offs and enabling strong decision making. Mentoring and Leadership: Mentor Engineers, provide coaching and support, and help foster a positive, collaborative team culture. Essential Qualifications / Skills / Experience: Degree or equivalent experience in an engineering subject (Electronics, Computer Science, Software), Physics, Mathematics, or another scientific subject. 8+ years of experience in embedded software development in C. A strong knowledge of Computer Science fundamentals in data structures, algorithm design, problem-solving, and complexity analysis. A strong grounding in embedded software architecture, with a focus on maintainability, modularity, fault-tolerance and testability. Confident and experienced with automated testing, including unit, integration and system tests, mocking and automation frameworks. A strong understanding of API design and the creation of clear, stable abstractions for hardware / firmware interaction. Skilled at debugging in constrained environments and using hardware / software debugging tools. A proven track record of innovation and quality software development throughout the entire software product lifecycle. Ability to solve complex technical problems in elegant and maintainable ways, demonstrating systems thinking across hardware, firmware and application layers. Experience with embedded platforms (for example: Embedded Linux, Arduino, STM32, Nordic, Zephyr RTOS). A passion and drive for excellence in software craftsmanship. Linux, Bash / shell, CI (Continuous integration) experience. Ability to read electronics schematics and collaborate effectively with Hardware Engineers during bring-up and debugging. Technical leadership through influence able to guide architecture and standards, mentor others, and improve team-wide practices. Practical, proactive mindset comfortable taking initiative and working through ambiguity in a fast-moving team. Proven experience in people or team management, with the ability to lead, motivate, and develop others. Strong communication and interpersonal skills, with the ability to build positive working relationships at all levels. Proven ability to foster high performing, engaged, and collaborative teams. About Our Client They are a leader in assistive communication technology, with products used globally by people with diverse needs. Their values, passionate, caring, empowering, achieving together and enabling change, guide everything they do. Our Client s Inclusive Culture They believe in giving everyone a voice. Joining them means joining a diverse, collaborative team and supporting a community that relies on their technology. Our Client s Commitment to Sustainability They prioritise sustainability, aiming to reduce their environmental impact. By joining them, you ll help support a more inclusive and sustainable future. Our Client s D&I Commitments They are a Disability Confident Employer and a Founding Partner of Purple Tuesday. Their recruitment practices are inclusive and barrier free, with adjustments available throughout the process and your career. They believe in adding to their culture. Their diverse team shapes products that reflect their users. Rewards and Benefits Explore competitive salary, private medical insurance, hybrid working, wellness benefits and paid volunteering days. Agencies Please respect that at this current time, our client wishes to recruit directly and are not seeking agency support.
May 20, 2026
Full time
Senior Firmware Engineer Location: Bristol; Hybrid Join our client as a Senior Firmware Engineer! Are you a passionate Firmware Engineer wanting to make a real impact by giving a voice to those without speech? Our client is looking for a dedicated individual to help improve the lives of people with disabilities. Your Impact As our client s Senior Firmware Engineer, you will: Technical Project Delivery: Deliver multi disciplinary projects, meeting scope, time, budget and quality requirements, and coordinating others as needed. Firmware Architecture and Lifecycle: Develop reliable, portable firmware with a long-life cycle. Firmware Development: Design, develop and maintain embedded firmware in C for Zephyr RTOS and Embedded Linux, including board bring up, drivers and HALs. Code Quality and Standards: Set and uphold coding, documentation and review standards, ensuring best practices in architecture, modularity, fault tolerance and testability. Test strategy and Automation: Apply strong automated testing practices following the Test Pyramid, including unit, component, contract and hardware in the loop tests, with CI automation to prevent regressions. Test Software and Tooling: Build and maintain automated test harnesses, GUIs and utility tools (e.g. Python, C#) to support development, validation and manufacturing. Libraries and Developer Experience: Create libraries and demo applications in C compatible languages (C#, C++) to support subsystem validation and cross team integration. Verification and Validation: EAD verification through lab testing, user trials and real world use, ensuring documentation supports regulatory compliance. Quality Assurance: Analyse and resolve quality issues promptly, feeding insights back into designs and processes to drive continuous improvement. Technical Strategy: Contribute to strategy for reliable, mission critical firmware, clearly communicating trade offs and enabling strong decision making. Mentoring and Leadership: Mentor Engineers, provide coaching and support, and help foster a positive, collaborative team culture. Essential Qualifications / Skills / Experience: Degree or equivalent experience in an engineering subject (Electronics, Computer Science, Software), Physics, Mathematics, or another scientific subject. 8+ years of experience in embedded software development in C. A strong knowledge of Computer Science fundamentals in data structures, algorithm design, problem-solving, and complexity analysis. A strong grounding in embedded software architecture, with a focus on maintainability, modularity, fault-tolerance and testability. Confident and experienced with automated testing, including unit, integration and system tests, mocking and automation frameworks. A strong understanding of API design and the creation of clear, stable abstractions for hardware / firmware interaction. Skilled at debugging in constrained environments and using hardware / software debugging tools. A proven track record of innovation and quality software development throughout the entire software product lifecycle. Ability to solve complex technical problems in elegant and maintainable ways, demonstrating systems thinking across hardware, firmware and application layers. Experience with embedded platforms (for example: Embedded Linux, Arduino, STM32, Nordic, Zephyr RTOS). A passion and drive for excellence in software craftsmanship. Linux, Bash / shell, CI (Continuous integration) experience. Ability to read electronics schematics and collaborate effectively with Hardware Engineers during bring-up and debugging. Technical leadership through influence able to guide architecture and standards, mentor others, and improve team-wide practices. Practical, proactive mindset comfortable taking initiative and working through ambiguity in a fast-moving team. Proven experience in people or team management, with the ability to lead, motivate, and develop others. Strong communication and interpersonal skills, with the ability to build positive working relationships at all levels. Proven ability to foster high performing, engaged, and collaborative teams. About Our Client They are a leader in assistive communication technology, with products used globally by people with diverse needs. Their values, passionate, caring, empowering, achieving together and enabling change, guide everything they do. Our Client s Inclusive Culture They believe in giving everyone a voice. Joining them means joining a diverse, collaborative team and supporting a community that relies on their technology. Our Client s Commitment to Sustainability They prioritise sustainability, aiming to reduce their environmental impact. By joining them, you ll help support a more inclusive and sustainable future. Our Client s D&I Commitments They are a Disability Confident Employer and a Founding Partner of Purple Tuesday. Their recruitment practices are inclusive and barrier free, with adjustments available throughout the process and your career. They believe in adding to their culture. Their diverse team shapes products that reflect their users. Rewards and Benefits Explore competitive salary, private medical insurance, hybrid working, wellness benefits and paid volunteering days. Agencies Please respect that at this current time, our client wishes to recruit directly and are not seeking agency support.
Senior Firmware Engineer Cambridge My client is looking for an experienced Embedded Software Engineer to join their industry-leading R&D team. You will take ownership of a bare-metal control stack , working with a high degree of autonomy to manage complex hardware-software integrations and precision motion control click apply for full job details
May 20, 2026
Full time
Senior Firmware Engineer Cambridge My client is looking for an experienced Embedded Software Engineer to join their industry-leading R&D team. You will take ownership of a bare-metal control stack , working with a high degree of autonomy to manage complex hardware-software integrations and precision motion control click apply for full job details
Nordson Test & Inspection, a global leader in world-class metrology equipment and inspection systems, is seeking a motivated and talented Graduate Junior Electronics Engineer to join our team in Colchester, United Kingdom. Summary of the role You will be responsible for designing electronics hardware associated with X-ray imaging components. You will have the opportunity to contribute to the full lifecycle, from initial concept to product including design, development, test and production support. You will be supported by an experienced team to develop your Electronics Engineering abilities and the personal skills needed to thrive in a high technology engineering team. There is the opportunity for skills rotation through other disciplines such as software development, mechatronics and IC design. As a member of our team, you will have the opportunity to work in a dynamic and collaborative environment, where your ideas and contributions will be valued and respected. We are committed to creating a diverse and inclusive workplace, and we are looking for candidates who share that same commitment. Role and Responsibilities PCB design including some high-speed elements. PCB layout constraints and analysis. High voltage (200 KV) PSU design. Embedded Firmware and HDL development. Technical documentation. Verification at board and system level. Skills and Qualifications Bachelor's or Master's degree in Electronics Engineering or a related field. Knowledge of analogue/digital circuit design, power electronics, and embedded systems. Good communication and interpersonal skills, willingness to learn and be flexible to change. Experience with Analogue circuit design (e.g. LTSpice etc) and testing. Knowledge of PCB CAD tools (e.g. Altium etc) is preferred Knowledge of FPGA design using VHDL/Verilog, including simulation and verification, is preferred Travel Some travel to Nordson sites both in the UK and overseas. Less than 5% Benefits We offer a flexible work schedule, a comprehensive benefits package, and opportunities for growth and development. Our benefits do further include: Company Healthcare Scheme after successful completion of probationary period (3 months) Group Personal Pension Plan - 4% minimum employee contribution, 6% employer contribution after successful completion of probationary period (3 months) 25 days annual holiday entitlement, plus public holidays About Nordson Test & Inspection Nordson Test & Inspection manufactures world-class metrology equipment and inspection systems to ensure electronic products are built to meet the highest standards. We use X-ray inspection, acoustic imaging, and optical inspection technologies to create testing systems that enable the identification of even the smallest defects at high resolution. By joining our team today, you will help us bring innovative ideas to life. Nordson Test & Inspection is a global team that works to create machines and systems that improve the manufacturing process for a wide range of industries, including electronics, aerospace, automotive, energy, lighting, and medical. We offer a supportive culture in a growing and dynamic work environment. Whether you're just beginning your career or you're a seasoned professional, there's a place for you to belong at Nordson Test & Inspection. We offer hourly and salary positions in production, maintenance, customer service, quality, engineering, and more. We actively invest in our teams to help you build your skillsets and advance your career. Our recruitment process is designed to identify the best qualified candidates for the role, and we are committed to ensuring a fair and equitable interview process. We are looking for candidates who have a passion for inclusion, diversity and equity, and the ability to contribute to a culture where all employees feel valued, respected, and included. Interested? If you are interested in being a part of a team that is dedicated to providing advanced inspection and testing solutions and creating an inclusive and diverse workplace, please apply online with your CV.
May 20, 2026
Full time
Nordson Test & Inspection, a global leader in world-class metrology equipment and inspection systems, is seeking a motivated and talented Graduate Junior Electronics Engineer to join our team in Colchester, United Kingdom. Summary of the role You will be responsible for designing electronics hardware associated with X-ray imaging components. You will have the opportunity to contribute to the full lifecycle, from initial concept to product including design, development, test and production support. You will be supported by an experienced team to develop your Electronics Engineering abilities and the personal skills needed to thrive in a high technology engineering team. There is the opportunity for skills rotation through other disciplines such as software development, mechatronics and IC design. As a member of our team, you will have the opportunity to work in a dynamic and collaborative environment, where your ideas and contributions will be valued and respected. We are committed to creating a diverse and inclusive workplace, and we are looking for candidates who share that same commitment. Role and Responsibilities PCB design including some high-speed elements. PCB layout constraints and analysis. High voltage (200 KV) PSU design. Embedded Firmware and HDL development. Technical documentation. Verification at board and system level. Skills and Qualifications Bachelor's or Master's degree in Electronics Engineering or a related field. Knowledge of analogue/digital circuit design, power electronics, and embedded systems. Good communication and interpersonal skills, willingness to learn and be flexible to change. Experience with Analogue circuit design (e.g. LTSpice etc) and testing. Knowledge of PCB CAD tools (e.g. Altium etc) is preferred Knowledge of FPGA design using VHDL/Verilog, including simulation and verification, is preferred Travel Some travel to Nordson sites both in the UK and overseas. Less than 5% Benefits We offer a flexible work schedule, a comprehensive benefits package, and opportunities for growth and development. Our benefits do further include: Company Healthcare Scheme after successful completion of probationary period (3 months) Group Personal Pension Plan - 4% minimum employee contribution, 6% employer contribution after successful completion of probationary period (3 months) 25 days annual holiday entitlement, plus public holidays About Nordson Test & Inspection Nordson Test & Inspection manufactures world-class metrology equipment and inspection systems to ensure electronic products are built to meet the highest standards. We use X-ray inspection, acoustic imaging, and optical inspection technologies to create testing systems that enable the identification of even the smallest defects at high resolution. By joining our team today, you will help us bring innovative ideas to life. Nordson Test & Inspection is a global team that works to create machines and systems that improve the manufacturing process for a wide range of industries, including electronics, aerospace, automotive, energy, lighting, and medical. We offer a supportive culture in a growing and dynamic work environment. Whether you're just beginning your career or you're a seasoned professional, there's a place for you to belong at Nordson Test & Inspection. We offer hourly and salary positions in production, maintenance, customer service, quality, engineering, and more. We actively invest in our teams to help you build your skillsets and advance your career. Our recruitment process is designed to identify the best qualified candidates for the role, and we are committed to ensuring a fair and equitable interview process. We are looking for candidates who have a passion for inclusion, diversity and equity, and the ability to contribute to a culture where all employees feel valued, respected, and included. Interested? If you are interested in being a part of a team that is dedicated to providing advanced inspection and testing solutions and creating an inclusive and diverse workplace, please apply online with your CV.
General Knowledge & Experience Personal Experience - zSeries Storage Management/Engineering background preferred or experience to equivalent level - Working and partnering with vendors (eg IBM, DELL, Broadcom) - Supporting and/or leading technical management of large infrastructure deployment projects - Experience supporting large-scale enterprise IT environment and the Embedded controls within change, incident, and problem management processes - Experience working with Agile working practices and tooling - Experience and awareness of security, audit, risk and compliance within enterprise IT environment Personal Skills - Ability to work under pressure to deadlines - Strong work ethic - Collaborating with others and building a network - Strong interpersonal skills - Ability to pitch communications to a variety of stakeholders Hardware Technical Skills - IBM DS8K disk hardware installation design, upgrade and support skills including DSCLI Scripting and familiarity with HMC GUI - DELL DLM virtual tape (VTE with Data Domain) hardware installation design, upgrade and support skills with knowledge of GUI, NFS and Linux - Broadcom (Brocade) DCX hardware skills and FICON/FIBRE concepts and configuration. Set-up and utilising SanNav and Maps Software Technical Skills - IBM core knowledge: z/OS, TSO, SDSF, JCL, IDCAMS, IWS - IBM storage knowledge: DFHSM, DFDSS, ICKDSF, DFSMS (inc OAM), TDMF, GDPS, CSM - Broadcom (CA): CA1, CA Vantage, CA Disk, CA Allocate, CA View, Endeavor - Dino Software: T-rex, Terradon - Rocket: CR+ - Interchip: RTD Additional skills (optional) - Knowledge of zSeries Systems Programming concepts and technologies - Awareness of Network technologies and Dark Fibre concepts - Awareness of newer or emerging technologies - Awareness of IBM Virtual tape solutions (TS7700's) - Experience of data centre migrations - Knowledge of: GKLM, Spectrum Control and Storage insights and API exploitation - Knowledge of Ansible Automation Platform (AAP), GitHub, Jenkins - Programing/Scripting languages: Rexx, Python, YAML The zSeries Storage Engineer is responsible for leading, building and supporting the zSeries Storage hardware and software infrastructure. This role will carry out some or all of the following activities Perform a Technical Project Management role for large zSeries infrastructure deployment and evergreening projects Setup automation to reduce manaual interventions in the Storage infrastructure Test new software and exploit functionality Consolidate and reduce infrastructure complexity Risk and Cost Management Ensure Service Quality Targets are met for offered platform services Business stakeholder management Vendor liaison and management zSeries Storage hardware/software design, configuration, testing, implementation and support Location: Sheffield Client: HSBC Day Rate: negotiable (Inside IR35) Hybrid/Remote: Hybrid (2-3 days in office)
May 20, 2026
Contractor
General Knowledge & Experience Personal Experience - zSeries Storage Management/Engineering background preferred or experience to equivalent level - Working and partnering with vendors (eg IBM, DELL, Broadcom) - Supporting and/or leading technical management of large infrastructure deployment projects - Experience supporting large-scale enterprise IT environment and the Embedded controls within change, incident, and problem management processes - Experience working with Agile working practices and tooling - Experience and awareness of security, audit, risk and compliance within enterprise IT environment Personal Skills - Ability to work under pressure to deadlines - Strong work ethic - Collaborating with others and building a network - Strong interpersonal skills - Ability to pitch communications to a variety of stakeholders Hardware Technical Skills - IBM DS8K disk hardware installation design, upgrade and support skills including DSCLI Scripting and familiarity with HMC GUI - DELL DLM virtual tape (VTE with Data Domain) hardware installation design, upgrade and support skills with knowledge of GUI, NFS and Linux - Broadcom (Brocade) DCX hardware skills and FICON/FIBRE concepts and configuration. Set-up and utilising SanNav and Maps Software Technical Skills - IBM core knowledge: z/OS, TSO, SDSF, JCL, IDCAMS, IWS - IBM storage knowledge: DFHSM, DFDSS, ICKDSF, DFSMS (inc OAM), TDMF, GDPS, CSM - Broadcom (CA): CA1, CA Vantage, CA Disk, CA Allocate, CA View, Endeavor - Dino Software: T-rex, Terradon - Rocket: CR+ - Interchip: RTD Additional skills (optional) - Knowledge of zSeries Systems Programming concepts and technologies - Awareness of Network technologies and Dark Fibre concepts - Awareness of newer or emerging technologies - Awareness of IBM Virtual tape solutions (TS7700's) - Experience of data centre migrations - Knowledge of: GKLM, Spectrum Control and Storage insights and API exploitation - Knowledge of Ansible Automation Platform (AAP), GitHub, Jenkins - Programing/Scripting languages: Rexx, Python, YAML The zSeries Storage Engineer is responsible for leading, building and supporting the zSeries Storage hardware and software infrastructure. This role will carry out some or all of the following activities Perform a Technical Project Management role for large zSeries infrastructure deployment and evergreening projects Setup automation to reduce manaual interventions in the Storage infrastructure Test new software and exploit functionality Consolidate and reduce infrastructure complexity Risk and Cost Management Ensure Service Quality Targets are met for offered platform services Business stakeholder management Vendor liaison and management zSeries Storage hardware/software design, configuration, testing, implementation and support Location: Sheffield Client: HSBC Day Rate: negotiable (Inside IR35) Hybrid/Remote: Hybrid (2-3 days in office)
Nordson Test & Inspection, a global leader in world-class metrology equipment and inspection systems, is seeking a motivated and talented Graduate Junior Electronics Engineer to join our team in Colchester, United Kingdom. Summary of the role You will be responsible for designing electronics hardware associated with X-ray imaging components. You will have the opportunity to contribute to the full lifecycle, from initial concept to product including design, development, test and production support. You will be supported by an experienced team to develop your Electronics Engineering abilities and the personal skills needed to thrive in a high technology engineering team. There is the opportunity for skills rotation through other disciplines such as software development, mechatronics and IC design. As a member of our team, you will have the opportunity to work in a dynamic and collaborative environment, where your ideas and contributions will be valued and respected. We are committed to creating a diverse and inclusive workplace, and we are looking for candidates who share that same commitment. Role and Responsibilities PCB design including some high-speed elements. PCB layout constraints and analysis. High voltage (200 KV) PSU design. Embedded Firmware and HDL development. Technical documentation. Verification at board and system level. Skills and Qualifications Bachelor's or Master's degree in Electronics Engineering or a related field. Knowledge of analogue/digital circuit design, power electronics, and embedded systems. Good communication and interpersonal skills, willingness to learn and be flexible to change. Experience with Analogue circuit design (e.g. LTSpice etc) and testing. Knowledge of PCB CAD tools (e.g. Altium etc) is preferred Knowledge of FPGA design using VHDL/Verilog, including simulation and verification, is preferred Travel Some travel to Nordson sites both in the UK and overseas. Less than 5% Benefits We offer a flexible work schedule, a comprehensive benefits package, and opportunities for growth and development. Our benefits do further include: Company Healthcare Scheme after successful completion of probationary period (3 months) Group Personal Pension Plan - 4% minimum employee contribution, 6% employer contribution after successful completion of probationary period (3 months) 25 days annual holiday entitlement, plus public holidays About Nordson Test & Inspection Nordson Test & Inspection manufactures world-class metrology equipment and inspection systems to ensure electronic products are built to meet the highest standards. We use X-ray inspection, acoustic imaging, and optical inspection technologies to create testing systems that enable the identification of even the smallest defects at high resolution. By joining our team today, you will help us bring innovative ideas to life. Nordson Test & Inspection is a global team that works to create machines and systems that improve the manufacturing process for a wide range of industries, including electronics, aerospace, automotive, energy, lighting, and medical. We offer a supportive culture in a growing and dynamic work environment. Whether you're just beginning your career or you're a seasoned professional, there's a place for you to belong at Nordson Test & Inspection. We offer hourly and salary positions in production, maintenance, customer service, quality, engineering, and more. We actively invest in our teams to help you build your skillsets and advance your career. Our recruitment process is designed to identify the best qualified candidates for the role, and we are committed to ensuring a fair and equitable interview process. We are looking for candidates who have a passion for inclusion, diversity and equity, and the ability to contribute to a culture where all employees feel valued, respected, and included. Interested? If you are interested in being a part of a team that is dedicated to providing advanced inspection and testing solutions and creating an inclusive and diverse workplace, please apply online with your CV.
May 20, 2026
Full time
Nordson Test & Inspection, a global leader in world-class metrology equipment and inspection systems, is seeking a motivated and talented Graduate Junior Electronics Engineer to join our team in Colchester, United Kingdom. Summary of the role You will be responsible for designing electronics hardware associated with X-ray imaging components. You will have the opportunity to contribute to the full lifecycle, from initial concept to product including design, development, test and production support. You will be supported by an experienced team to develop your Electronics Engineering abilities and the personal skills needed to thrive in a high technology engineering team. There is the opportunity for skills rotation through other disciplines such as software development, mechatronics and IC design. As a member of our team, you will have the opportunity to work in a dynamic and collaborative environment, where your ideas and contributions will be valued and respected. We are committed to creating a diverse and inclusive workplace, and we are looking for candidates who share that same commitment. Role and Responsibilities PCB design including some high-speed elements. PCB layout constraints and analysis. High voltage (200 KV) PSU design. Embedded Firmware and HDL development. Technical documentation. Verification at board and system level. Skills and Qualifications Bachelor's or Master's degree in Electronics Engineering or a related field. Knowledge of analogue/digital circuit design, power electronics, and embedded systems. Good communication and interpersonal skills, willingness to learn and be flexible to change. Experience with Analogue circuit design (e.g. LTSpice etc) and testing. Knowledge of PCB CAD tools (e.g. Altium etc) is preferred Knowledge of FPGA design using VHDL/Verilog, including simulation and verification, is preferred Travel Some travel to Nordson sites both in the UK and overseas. Less than 5% Benefits We offer a flexible work schedule, a comprehensive benefits package, and opportunities for growth and development. Our benefits do further include: Company Healthcare Scheme after successful completion of probationary period (3 months) Group Personal Pension Plan - 4% minimum employee contribution, 6% employer contribution after successful completion of probationary period (3 months) 25 days annual holiday entitlement, plus public holidays About Nordson Test & Inspection Nordson Test & Inspection manufactures world-class metrology equipment and inspection systems to ensure electronic products are built to meet the highest standards. We use X-ray inspection, acoustic imaging, and optical inspection technologies to create testing systems that enable the identification of even the smallest defects at high resolution. By joining our team today, you will help us bring innovative ideas to life. Nordson Test & Inspection is a global team that works to create machines and systems that improve the manufacturing process for a wide range of industries, including electronics, aerospace, automotive, energy, lighting, and medical. We offer a supportive culture in a growing and dynamic work environment. Whether you're just beginning your career or you're a seasoned professional, there's a place for you to belong at Nordson Test & Inspection. We offer hourly and salary positions in production, maintenance, customer service, quality, engineering, and more. We actively invest in our teams to help you build your skillsets and advance your career. Our recruitment process is designed to identify the best qualified candidates for the role, and we are committed to ensuring a fair and equitable interview process. We are looking for candidates who have a passion for inclusion, diversity and equity, and the ability to contribute to a culture where all employees feel valued, respected, and included. Interested? If you are interested in being a part of a team that is dedicated to providing advanced inspection and testing solutions and creating an inclusive and diverse workplace, please apply online with your CV.
Our client design and develop uncrewed systems for clients globally. They are currently looking for an additional Software Engineer coming from an embedded programming background. Responsibilities: Design, develop, and maintain high-quality software and firmware applications and services. Translate requirements into efficient, scalable, and secure software designs. Collaborate with cross-functional teams to define technical specifications and system behaviour. Conduct code reviews, support testing activities, and troubleshoot software defects. Develop and maintain documentation, including technical specifications, architecture diagrams, and user manuals. Participate in system integration activities and ensure software components operate seamlessly within wider system architectures. Conduct code reviews and provide constructive feedback to team members, ensuring adherence to coding standards and best practices. Debug and resolve complex software issues, working closely with the team to identify and implement effective solutions. Stay updated on the latest advancements and emerging technologies in the field of UAVs and drones, and incorporate them into the software development process. Monitor project progress, identify risks, and propose mitigation strategies to ensure timely delivery of high-quality software solutions. Collaborate with the product management team to define software requirements, prioritize features, and contribute to the overall product roadmap. Requirements: Strong coding skills in C++, Python and Matlab. Desirable to have flight controller coding or similar. Use of Ardupilot and/or PX4 will ensure interview! Apply asap.
May 20, 2026
Full time
Our client design and develop uncrewed systems for clients globally. They are currently looking for an additional Software Engineer coming from an embedded programming background. Responsibilities: Design, develop, and maintain high-quality software and firmware applications and services. Translate requirements into efficient, scalable, and secure software designs. Collaborate with cross-functional teams to define technical specifications and system behaviour. Conduct code reviews, support testing activities, and troubleshoot software defects. Develop and maintain documentation, including technical specifications, architecture diagrams, and user manuals. Participate in system integration activities and ensure software components operate seamlessly within wider system architectures. Conduct code reviews and provide constructive feedback to team members, ensuring adherence to coding standards and best practices. Debug and resolve complex software issues, working closely with the team to identify and implement effective solutions. Stay updated on the latest advancements and emerging technologies in the field of UAVs and drones, and incorporate them into the software development process. Monitor project progress, identify risks, and propose mitigation strategies to ensure timely delivery of high-quality software solutions. Collaborate with the product management team to define software requirements, prioritize features, and contribute to the overall product roadmap. Requirements: Strong coding skills in C++, Python and Matlab. Desirable to have flight controller coding or similar. Use of Ardupilot and/or PX4 will ensure interview! Apply asap.
We don't just believe in better. We make it happen. " Better content. Better products. And better careers. " Working in Tech, Product or Data at Sky is about building the next and the new. From broadband to broadcast, streaming to mobile, Sky Stream to Sky Glass, we never stand still. We optimise and innovate. We turn big ideas into the products, content and services millions of people love. And we do it all right here at Sky." And we do it all right here at Sky. Role/ Team overview" The AppSec Tooling team at Sky is responsible for enabling secure software development practices across the organisation. We build and operate platforms that support penetration testing activities, including the scheduling, organisation, and management of testing engagements, as well as capabilities for threat modelling, security reporting, and vulnerability remediation. This is an exciting opportunity to join the AppSec Tooling function at Sky as we continue to scale our platforms and services. We are expanding our UK-based capability to ensure software security is embedded by default across Sky's engineering estate. This role requires strong hands-on software security knowledge, the ability to investigate and respond to application-level security vulnerabilities and incidents, and the confidence to influence engineering teams toward secure-by-design outcomes at scale. . What you'll do Work closely with software engineering, platform, and DevOps teams to embed security into the end-to-end software delivery lifecycle across AWS-based environments Support and guide the secure development of cloud-native applications, APIs, and backend services using technologies such as Python, JavaScript, and PHP Provide practical guidance on secure application design, authentication, access control, secrets management, and resilient cloud architectures Integrate security, testing, and automation controls into CI/CD pipelines and development workflows while maintaining a strong developer experience Contribute to the development and maintenance of infrastructure as code, cloud automation, and scalable platform capabilities within AWS environments Drive the adoption of engineering guardrails, reusable security patterns, and automation that enable teams to deliver securely and efficiently at scale Support the identification, investigation, triage, and remediation of application and platform vulnerabilities in collaboration with engineering teams Contribute to security incident response activities, including root cause analysis, remediation support, and continuous improvement initiatives Work with platform and engineering teams to improve monitoring, logging, alerting, and observability practices across distributed systems Promote a positive engineering and security culture through coaching, collaboration, knowledge sharing, and day-to-day engagement with development teams What you'll bring Strong understanding of modern software engineering practices, secure development principles, and common application security risks Experience developing and supporting cloud-native applications using Python, JavaScript, and/or PHP within AWS-based environments Familiarity with designing and integrating RESTful APIs, backend services, and event-driven architectures Experience integrating security, testing, and automation controls into CI/CD pipelines and software delivery workflows Hands-on experience with infrastructure as code and cloud automation to provision and manage scalable AWS environments Experience working with containerised applications and modern platform technologies in distributed systems Understanding of secure authentication, access control, secrets management, and security best practices in cloud environments Experience implementing monitoring, logging, alerting, and observability practices for operational resilience and troubleshooting Ability to investigate, triage, and help remediate application and platform security issues in collaboration with engineering teams Strong problem-solving, collaboration, and communication skills, with the ability to work effectively across engineering, platform, and security teams in fast-paced environments Benefits and perks There's one thing people can't stop talking about when it comes to life at Sky: the perks. Here's a taster: Free Sky TV or NOW package, including Sky Sports and Sky Cinema Pension package"with up to 9% employer contribution Private healthcare"with mental health support" Aviva Digital GP and dental insurance" Discounts on Sky products, including Sky Mobile, Sky Broadband, Sky Glass and Sky Protect Sharesave and Tech schemes" A range of Sky VIP rewards and experiences " How you'll work" At Sky, we want to be a community that thrives by being together. Flexible working remains a key part of that. We want our people to have the best of both worlds - time working at home, as well as time in the office. The hybrid working expectations for this role are 2 days in the office per week. Your office base Osterley Our Osterley Campus is a 10-minute walk from Syon Lane train station. Or you can hop on one of our free shuttle buses that run to and from Osterley, Gunnersbury, Ealing Broadway and South Ealing tube stations. There's also plenty of bike shelters and showers. On campus, you'll find 13 subsidised restaurants, cafes, and a Waitrose. You can keep in shape at our subsidised gym, catch the latest shows and movies at our cinema, get your car washed and even get pampered at our beauty salon. " Who we are" We're Sky, a leading media and entertainment company who connect millions with entertainment, sports, news and arts through innovative products and services. Working with us means you'll be bringing the joy of a better experience to more people, every day. All so we can do better and deliver better for our customers, colleagues and society. " We're an equal opportunity employer and value diversity at our company. We're a Disability Confident Accredited Employer, and welcome and encourage applications from all candidates."We will look to ensure a fair and consistent experience for all and will make reasonable adjustments to support you where appropriate. Please flag any adjustments you need as early as you can." Just so you know: if your application is successful, we'll ask you to complete a criminal record check. And depending on the role you have applied for and the nature of any convictions you may have, we might have to withdraw the offer. " To be eligible for this role you are required to have the appropriate right to work in the UK. Please be aware Sky does not offer sponsorship for this position. To find out more about working with us, search on social media."
May 20, 2026
Full time
We don't just believe in better. We make it happen. " Better content. Better products. And better careers. " Working in Tech, Product or Data at Sky is about building the next and the new. From broadband to broadcast, streaming to mobile, Sky Stream to Sky Glass, we never stand still. We optimise and innovate. We turn big ideas into the products, content and services millions of people love. And we do it all right here at Sky." And we do it all right here at Sky. Role/ Team overview" The AppSec Tooling team at Sky is responsible for enabling secure software development practices across the organisation. We build and operate platforms that support penetration testing activities, including the scheduling, organisation, and management of testing engagements, as well as capabilities for threat modelling, security reporting, and vulnerability remediation. This is an exciting opportunity to join the AppSec Tooling function at Sky as we continue to scale our platforms and services. We are expanding our UK-based capability to ensure software security is embedded by default across Sky's engineering estate. This role requires strong hands-on software security knowledge, the ability to investigate and respond to application-level security vulnerabilities and incidents, and the confidence to influence engineering teams toward secure-by-design outcomes at scale. . What you'll do Work closely with software engineering, platform, and DevOps teams to embed security into the end-to-end software delivery lifecycle across AWS-based environments Support and guide the secure development of cloud-native applications, APIs, and backend services using technologies such as Python, JavaScript, and PHP Provide practical guidance on secure application design, authentication, access control, secrets management, and resilient cloud architectures Integrate security, testing, and automation controls into CI/CD pipelines and development workflows while maintaining a strong developer experience Contribute to the development and maintenance of infrastructure as code, cloud automation, and scalable platform capabilities within AWS environments Drive the adoption of engineering guardrails, reusable security patterns, and automation that enable teams to deliver securely and efficiently at scale Support the identification, investigation, triage, and remediation of application and platform vulnerabilities in collaboration with engineering teams Contribute to security incident response activities, including root cause analysis, remediation support, and continuous improvement initiatives Work with platform and engineering teams to improve monitoring, logging, alerting, and observability practices across distributed systems Promote a positive engineering and security culture through coaching, collaboration, knowledge sharing, and day-to-day engagement with development teams What you'll bring Strong understanding of modern software engineering practices, secure development principles, and common application security risks Experience developing and supporting cloud-native applications using Python, JavaScript, and/or PHP within AWS-based environments Familiarity with designing and integrating RESTful APIs, backend services, and event-driven architectures Experience integrating security, testing, and automation controls into CI/CD pipelines and software delivery workflows Hands-on experience with infrastructure as code and cloud automation to provision and manage scalable AWS environments Experience working with containerised applications and modern platform technologies in distributed systems Understanding of secure authentication, access control, secrets management, and security best practices in cloud environments Experience implementing monitoring, logging, alerting, and observability practices for operational resilience and troubleshooting Ability to investigate, triage, and help remediate application and platform security issues in collaboration with engineering teams Strong problem-solving, collaboration, and communication skills, with the ability to work effectively across engineering, platform, and security teams in fast-paced environments Benefits and perks There's one thing people can't stop talking about when it comes to life at Sky: the perks. Here's a taster: Free Sky TV or NOW package, including Sky Sports and Sky Cinema Pension package"with up to 9% employer contribution Private healthcare"with mental health support" Aviva Digital GP and dental insurance" Discounts on Sky products, including Sky Mobile, Sky Broadband, Sky Glass and Sky Protect Sharesave and Tech schemes" A range of Sky VIP rewards and experiences " How you'll work" At Sky, we want to be a community that thrives by being together. Flexible working remains a key part of that. We want our people to have the best of both worlds - time working at home, as well as time in the office. The hybrid working expectations for this role are 2 days in the office per week. Your office base Osterley Our Osterley Campus is a 10-minute walk from Syon Lane train station. Or you can hop on one of our free shuttle buses that run to and from Osterley, Gunnersbury, Ealing Broadway and South Ealing tube stations. There's also plenty of bike shelters and showers. On campus, you'll find 13 subsidised restaurants, cafes, and a Waitrose. You can keep in shape at our subsidised gym, catch the latest shows and movies at our cinema, get your car washed and even get pampered at our beauty salon. " Who we are" We're Sky, a leading media and entertainment company who connect millions with entertainment, sports, news and arts through innovative products and services. Working with us means you'll be bringing the joy of a better experience to more people, every day. All so we can do better and deliver better for our customers, colleagues and society. " We're an equal opportunity employer and value diversity at our company. We're a Disability Confident Accredited Employer, and welcome and encourage applications from all candidates."We will look to ensure a fair and consistent experience for all and will make reasonable adjustments to support you where appropriate. Please flag any adjustments you need as early as you can." Just so you know: if your application is successful, we'll ask you to complete a criminal record check. And depending on the role you have applied for and the nature of any convictions you may have, we might have to withdraw the offer. " To be eligible for this role you are required to have the appropriate right to work in the UK. Please be aware Sky does not offer sponsorship for this position. To find out more about working with us, search on social media."
Job Title : Electronic Design Engineer Location : Portsmouth Salary : £50,000 - £60,000 (Depending on Experience) Note : All applicants must be able to work in the UK without the need for VISA Sponsorship now, or in the future. Overview: We are currently seeking an experienced Electronic Design Engineer with at least 3 years of commercial experience and a strong understanding of electronic design and testing within a manufacturing environment. Experience working within a regulated industry would be highly advantageous. Our client develops advanced electronic systems deployed across the UK and is continuing to expand its engineering team. This is an exciting opportunity to play a key role in the development of next-generation products, while also supporting the enhancement and maintenance of existing systems. Key Responsibilities Collaborate with Embedded Software and Electronics Engineers to design, develop, modify, and test both new and existing systems Design electronic systems and complete products, considering component availability, lifecycle, and long-term reliability Develop and integrate hardware and software components to improve current platforms and support new product development Conduct fault-finding and failure analysis activities from PCB level through to complete system level Use a variety of test and measurement equipment, including oscilloscopes and digital multimeters, to evaluate PCBs and associated electronics Design, develop, review, and test embedded firmware using C Design, review, and test electronic hardware, including PCB development Support the creation of new hardware and software assemblies to enhance both existing and future systems Required Skills & Experience Commercial experience with both analogue and digital electronic design Strong component selection, validation, and testing experience Understanding of Embedded C development Knowledge of automated testing methodologies (desirable) If you are interested in this opportunity, please apply with your latest CV. Suitable applicants will be contacted with further information.
May 20, 2026
Full time
Job Title : Electronic Design Engineer Location : Portsmouth Salary : £50,000 - £60,000 (Depending on Experience) Note : All applicants must be able to work in the UK without the need for VISA Sponsorship now, or in the future. Overview: We are currently seeking an experienced Electronic Design Engineer with at least 3 years of commercial experience and a strong understanding of electronic design and testing within a manufacturing environment. Experience working within a regulated industry would be highly advantageous. Our client develops advanced electronic systems deployed across the UK and is continuing to expand its engineering team. This is an exciting opportunity to play a key role in the development of next-generation products, while also supporting the enhancement and maintenance of existing systems. Key Responsibilities Collaborate with Embedded Software and Electronics Engineers to design, develop, modify, and test both new and existing systems Design electronic systems and complete products, considering component availability, lifecycle, and long-term reliability Develop and integrate hardware and software components to improve current platforms and support new product development Conduct fault-finding and failure analysis activities from PCB level through to complete system level Use a variety of test and measurement equipment, including oscilloscopes and digital multimeters, to evaluate PCBs and associated electronics Design, develop, review, and test embedded firmware using C Design, review, and test electronic hardware, including PCB development Support the creation of new hardware and software assemblies to enhance both existing and future systems Required Skills & Experience Commercial experience with both analogue and digital electronic design Strong component selection, validation, and testing experience Understanding of Embedded C development Knowledge of automated testing methodologies (desirable) If you are interested in this opportunity, please apply with your latest CV. Suitable applicants will be contacted with further information.
