168 jobs found

Electrical & Instrumentation Technician North East + Benefits COMAH Industrial Environment Our client is looking to recruit an experienced Electrical & Instrumentation (E&I) Technician to join a well-established industrial operation in the North East. This is an excellent opportunity to work within a highly regulated COMAH environment, offering long-term stability, strong safety culture, and ongoing training and development. The role would suit someone with solid hands-on experience in electrical and instrumentation maintenance, ideally within hazardous or heavy industrial environments. CompEx and 18th Edition qualifications are highly desirable, but candidates with relevant experience in similar sectors will also be considered. Responsibilities: Carry out maintenance, calibration, testing, and repair of electrical and instrumentation equipment Diagnose faults and ensure timely resolution to maintain plant performance and availability Complete all work in line with legal requirements and company health, safety, environmental, and quality standards Use CMMS systems to manage and record maintenance activities Install, inspect, and maintain plant equipment to a high standard and within required timescales Identify and report defects, alarms, and unsafe conditions, ensuring appropriate isolation where required Follow permit-to-work and change management procedures (MOC) Support shutdown planning and maintenance activities Contribute to continuous improvement by identifying opportunities to enhance plant performance and reliability Provide guidance or basic training to colleagues where required Support the wider engineering team with additional tasks in line with competency (e.g. basic mechanical work) Requirements: As an E&I Technician, you will be responsible for carrying out both reactive and planned maintenance across a wide range of electrical and instrumentation systems to ensure safe and efficient plant operation. Experience within a COMAH environment is advantageous, however candidates from other high-hazard industries such as oil & gas, power generation, pharmaceuticals, or manufacturing will also be considered. Therefore, to be successful you should be competent in the following: Strong experience in electrical and instrumentation maintenance within an industrial environment Knowledge of COMAH regulations and associated safety standards CompEx certification (preferred) 18th Edition Wiring Regulations (desirable) Experience with PLCs, control systems, or instrumentation software is advantageous Ability to interpret technical data and resolve complex plant issues Strong understanding of permit-to-work systems and safe isolation procedures What you ll bring: Strong fault-finding and problem-solving skills A proactive and safety-first approach Ability to work independently and as part of a team Experience working in a regulated industrial environment Good communication and reporting skills Benefits: Competitive salary Pension scheme Healthcare Overtime opportunities Ongoing training and development Long-term career stability within a high-performing engineering environment

Fantastic opportunity for a Software Engineer to join a leading consultancy based in Derbyshire. Our client specialise in innovative Research & Development (R&D) services, specifically for the Aerospace, Defence, Power Generation and Automotive industries. Their product range is unique and innovative. Software Engineer (Graduate / Experienced) £30,000 - £40,000 DOE + c10% Bonus, Pension, Private Medical, 36 Days Holiday, Flexi Working Derbyshire Ref: 23749 A great opportunity to work on innovative projects that push the boundaries of technology. Be part of a dynamic team that values creativity and teamwork. Software Engineer - The Role: Being involved in projects from concept to delivery Develop software for instrumentation and control systems. Design and implement Human-Machine Interfaces (HMIs). Conduct hands-on system testing and debugging. Manage multiple projects both independently and as part of a team. Software Engineer - The Person: Degree or equivalent industry experience in software development. Technical expertise in using LabVIEW and/or Python and a knack for developing attractive user interfaces would be beneficial. Excellent communication skills to effectively interact with team members and clients. Opportunities for continuous learning and career advancement are also part of the package. If you're ready for a challenging role in a supportive environment and have previously held or are interested in roles such as Software Developer, Systems Engineer, Application Developer, or LabVIEW Developer, this position could be the perfect fit for you. For further information call John Anderson AE1

Control Systems Engineer Location: West Midlands Salary: Competitive Salary DOE Full-Time or Part-Time Permanent Control Systems Engineer Siemens TIA Portal PLC Programming Automatio n My client is a growing industrial automation and control systems business looking to appoint a Control Systems Enginee r as part of a major growth phase within the company. This role offers the opportunity to work on a wide variety of industrial automation projects involving Siemens PLCs, HMIs, drives and control systems across manufacturing and industrial environments. The business is open to speaking with: Early career Controls Engineers Junior Automation Engineers Mid-level Controls Engineers Experienced Senior Control Systems Engineers Full-time and part-time applications are both welcomed. The Role As a Control Systems Engineer, you will be involved in: PLC programming and software development Siemens HMI design and configuration Siemens drive/VFD configuration Control system testing and fault finding Automation project delivery Commissioning and customer support activities Supporting industrial automation and control system projects from concept through to completion This role will involve a mixture of office-based engineering work alongside occasional customer site visits. Key Skills & Experience Essential: Previous experience within a Control Systems Engineer, Controls Engineer, PLC Engineer or Automation Engineer role Siemens PLC programming experience Experience using Siemens TIA Portal Experience with: Ladder Logic Structured Text Function Block Design (FBD) Experience with industrial automation systems Fault finding and troubleshooting experience Highly Desirable: Siemens ET200SP experience Siemens S7-1200 / S7-1500 experience Siemens Unified Comfort HMI experience Siemens G120C drive experience Commissioning experience Industrial instrumentation exposure SCADA experience JAVA exposure Technologies Used Siemens ET200SP Safety PLCs Siemens S7-1200 / S7-1500 Siemens Unified Comfort HMIs Siemens G120C drives Siemens TIA Portal V19+ Exposure to additional automation products would also be beneficial, including: Allen Bradley Schneider Electric Eurotherm Wago Weidm ller What's On Offer? Opportunity to join a growing automation business Varied automation and controls projects Flexible working options Long-term progression opportunities Opportunity to grow alongside the business Smaller engineering team with real technical influence Stable pipeline of upcoming projects and investment This is an excellent opportunity for someone looking to develop their career within industrial automation whilst working in a technically focused and growing engineering environment.

Position: Senior Project Engineer Location: Godalming Salary: £55,000 - £60,000 DOE A leading engineering firm near Godalming is seeking a Senior Project Engineer to lead and execute multi-disciplinary engineering projects across process, mechanical, electrical, and instrumentation scopes. This is a senior, hands-on engineering role responsible for managing every stage of the project lifecycle. You will be directly involved in producing P&IDs, specifying and procuring process equipment, coordinating with Controls engineers, and overseeing installation and commissioning activities. The role requires the ability to manage multiple projects at varying stages simultaneously while ensuring delivery on time, within budget, and to the highest safety and quality standards. This opportunity offers the chance to shape project strategy, mentor colleagues, and represent the business with professionalism to clients and partners worldwide. Senior Project Engineer Job Overview Provide strong leadership and technical direction to project teams, setting clear objectives and supporting high levels of delivery and accountability. Take full ownership of projects from concept and detailed design, including production of P&IDs, through procurement, site installation, commissioning, and final handover. Specify process equipment and manage procurement activities in line with technical and commercial requirements. Coordinate closely with the Controls team to ensure effective system integration and project execution. Develop and maintain effective working relationships with clients, subcontractors, and supply chain partners on a global basis. Review and manage technical tenders, costings, and supplier approval processes. Mentor colleagues to strengthen the overall capability of the project team. Maintain adherence to ISO9001 standards, health and safety legislation, and all relevant statutory obligations. Promote a culture of innovation, continuous improvement, and operational best practice. Serve as the main point of contact for customer support agreements and spare parts coordination. Senior Project Engineer Job Requirements Demonstrable experience across all stages of process equipment projects - ideally within Industrial Gases and Pipework environments. Degree qualified in a Mechanical, Industrial, or Process Engineering discipline. Highly effective leadership, communication, and stakeholder engagement capabilities. Strong technical expertise within process, mechanical, electrical, or instrumentation engineering disciplines. Proven track record of delivering projects safely, on schedule, and within agreed financial targets. Strong focus on quality standards, continuous improvement, and delivering excellent outcomes for customers. Either IOSH or NEBOSH qualification advantageous. Commutable distance to Godalming. Full UK Driving Licence & Passport with a willingness to travel. Senior Project Engineer Salary & Benefits Salary £55,000 - £60,000 dependent upon experience Company bonus scheme Working hours, Monday to Friday 8am - 5pm (40 hour working week) 33 days holiday including bank holidays Pension Bennett & Game Recruitment are acting as a Recruitment Agency in relation to this vacancy. Bennett and Game Recruitment are a multi-disciplined technical recruitment agency based in Chichester, West Sussex operating across the UK with specialist teams covering a range of industries.We are acting as a Recruitment Agency in relation to this vacancy, and in accordance with GDPR by applying you are granting us consent to process your data, contact you about the services we offer, and submit your CV for the role you have applied for.

We are currently looking to recruit an Automation Engineer to join our Manchester Dairy within our Muller Milk & Ingredients business. Automation Engineer Location: Manchester Hours: 40 hours per week, Monday- Friday Key Tasks: Reactive support for site automation issues within a clear escalation Demonstrate a structured problem solving approach Ownership of minor (site managed) automation Capex projects through the full project life cycle Support project delivery of other site projects with automation elements Facilitating site activities to centrally delivered Capex projects Maintain and monitor use of automation and electrical system software and documentation version control systems. Liaise with the Automation Development team providing a site perspective to the ongoing development of the group automation and electrical standards Ensure compliance with group electrical and automation standards of site delivered projects and general improvement works Responsible for obsolescence management within the roadmap. Liaison with the Automation Development Team to ensure site criticality is a key element of the group level Ownership of the site level Obsolescence and Improvements Plan focusing on the next level of controls (VSDs, servo drives, instrumentation etc.) Evaluate performance data to feed into automation OE activity to deliver improvements inefficiency and operability within production Ownership of site panel risk assessment register, periodic health checks and remedial/improvement actions Specialist automation support to site improvement initiatives Utilise specialist skills and systems access to validate and analyse site data, for example to support quality improvement activities Muller Responsibilities: Has an active role to play in continuously improving our business Encourage engineering based OE projects Support the site roadmaps for Quality / HS / EMS / Engineering / Autonomous maintenance To have oportunities to deliver own ideas to improve our business Support improvement activities / events within engineering owned areas Understands the impact of own actions and others on achieving site/business OGSM Aware of how current performance impacts the bottom line Ability to deliver on the job training (show and tell) to new colleagues Health and safety of self and others Requirements for the role: Strong experience with Allen Bradley PLCs. Excellent electrical skills. Ability to work independently on projects. Previous experience in a similar Automation Engineer role. FMCG industry experience preferred. Ability to thrive in a fast-paced environment. IT literacy is essential. Benefits: Up to 10% annual bonus. Health care cover. 4x life assurance. Pension scheme. Access to Muller rewards platform - save money across numerous retailers. 33 days annual leave (including bank holidays).Long-term career development. On-site secure car park. Supportive working environment. You can find out more about M ller and what it's like to work for us by clicking here Careers at M ller UK & Ireland

Job Title: Senior Engineer - C&I ( Integration, Verification & Validation) Location: Barrow-In-Furness - Hybrid, 2 days every 2 weeks on site We offer a range of hybrid and flexible working arrangements - please speak to your recruiter about the options for this particular role Salary: £42,215+ (DOE) Who we are: Join BAE Systems and you'll be part of something bigger. As a valued member of our global colleague network, you'll bring your unique skills and perspectives to help pioneer progress and protect what matters most. You'll be trusted to play your part in delivering the advanced, technology-led defence, aerospace and security solutions of tomorrow, shaping a safer future, for all of us. From the depths of the ocean, to the far reaches of space, there's no limit to where a career at BAE Systems could take you. Role Description: You'll use your knowledge in Control & Instrumentation and control systems to develop and shape the Integration, Verification and Validation (IV&V) capability for SSNA Platform Complex Systems. You will establish the infrastructure, frameworks and ways of working needed to support the full V-model lifecycle, ensuring robust requirement development, prototyping methods, integration and validation activities that underpin successful system delivery. You'll oversee and support system integration across multi-layered interfaces, resolving cross-discipline tasks while ensuring compliance with contractual, safety and regulatory requirements. Expect to define and assure V&V activities, capture design evidence within requirements tools, review supplier documentation and present technical outputs to stakeholders and customers. You'll also contribute to build, commissioning and acceptance activities, driving collaboration across engineering teams and delivering technical solutions that enable high-quality, fully integrated systems. Core duties: You will apply Instrumentation and Control System experience to support design, integration and delivery of highly detailed systems You'll strategise, support and oversee and support IV&V activities across the engineering lifecycle, ensuring robust verification and validation outcomes You demonstrate considerable understanding of the full lifecycle, from requirements definition through to integration and acceptance You produce clear technical documentation and apply Control Systems knowledge to support engineering strategies and assurance Essential Skills: You hold a BEng (Hons) / MEng or equivalent experience in an engineering discipline or in Control & Instrumentation You can show robust understanding of the full engineering lifecycle, from requirements through to integration and validation You have demonstratable experience delivering IV&V activities and producing clear, structured technical documentation You will possess knowledge in at least one of the following areas, of control systems, PID, fieldbus technologies, prototyping or system integration The SSNA - Platform Complex Systems Team: The team is a growing, high-impact engineering function delivering IV&V and system integration across the SSNA programme. Working across disciplines, the team drives collaboration, resolves intricate tasks and shapes new capabilities-offering excellent development, cross-programme exposure and considerable support toward chartership. We offer relocation support packages across all Submarines roles, subject to meeting eligibility criteria. Why BAE Systems? Here you'll build a career with purpose and limitless possibilities. With lifelong learning and meaningful work, this is a place where you can grow your career with confidence and be empowered to be your best. You'll be recognised for your contribution and enjoy rewards tailored to what's most important to you and your family, support for your financial and personal wellbeing, as well as a balanced lifestyle. In an environment embracing sustainable ways of working and with a strong sense of shared purpose, our supportive culture is a place you can feel you belong and proud of the difference you make. A place where everyone can thrive: We're committed to building an inclusive workplace where everyone feels valued and supported. We know that a diversity of backgrounds, perspectives and experiences strengthens our teams and is vital to the work we do. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date: 31st May 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible.

Field Service Engineer / Water Treatment Engineer / Service Technician required to join a leading Water Treatment solutions provider. The successful Field Service Engineer / Water Treatment Engineer / Service Technician will be responsibvle for both Electrical and Mechanical maintenance, servicing, and repair of a variety of water / watewater treatment systems such as, Reverse Osmosis systems, Demineralisation systems, Water Softening Units, Ultrafiltration systems, Electro - Deionisation units, polymer dosing systems, as well as cartridge media and other related wastewater treatment equipment. The Field Service Engineer / Water Treatment Engineer / Service Technician will ideally have an engineering background, with some electrical experience, with experience working on and around water treatment systems and related components such as pumps, motros, valves, actuators, filters, UV systems, aeration systems, flow meters and instrumentation, chemical dosing systems, control systems, and related components. Package 35,000 - 40,000 depending on experience. Company vehicle. Overtime payments. Annual Bonus 25 days + Bank Holidays. Door to Door pay Pension. Additional benefits. Field Service Engineer / Water Treatment Engineer / Service Technician Role Be responsibvle for both Electrical and Mechanical maintenance, servicing, and repair of a variety of water / watewater treatment systems such as, Reverse Osmosis systems, Demineralisation systems, Water Softening Units, Ultrafiltration systems, Electro - Deionisation units, polymer dosing systems, as well as cartridge media and other related wastewater treatment equipment. Willingness to cover the South West of the UK, remotley. Working on a range of water / wastewater treatment systems, and related products. Support Installation, calibration, maintenance and verification of systems. Liaise with various engineering departments. Field Service Engineer / Water Treatment Engineer / Service Technician Requirements Proven engineering background, with some electrical experience, with experience working on and around water treatment systems and related components such as pumps, motros, valves, actuators, filters, UV systems, aeration systems, flow meters and instrumentation, chemical dosing systems, control systems, and related components. Water treatment experience is a bonus. Knowledge of reverse osmosis, deionization, and filtration systems is preferred. Experience in field service roles such as Field Service Engineer, Service Engineer, Service Technician, or similar. A full UK driving license is essential. Willingness to travel across the Southwest region and work at various sites. Engineering qualifications are desirable but not essential.

Shift Electrical Maintenance Engineer Location: Horsham, West Sussex, United Kingdom Position Type: Full-Time - Permanent Shift Pattern: 4 on 4 off (2 days, 2 nights and 4 off) 06:30 - 18:30 & 18:30 - 06:30) Overview An excellent opportunity has arisen for an experienced Shift Electrical Maintenance Engineer to join a well-established industrial operation. The successful candidate will be responsible for ensuring high levels of plant availability through effective planned preventative maintenance, reactive maintenance, fault diagnosis, and continuous improvement initiatives. This role requires a proactive engineer with strong electrical maintenance experience in industrial, manufacturing, or automated environments, capable of maintaining high engineering, safety, and compliance standards. Key Responsibilities Carry out planned preventative maintenance and reactive breakdown repairs on plant equipment Diagnose and rectify electrical faults across motors, sensors, relays, contactors, control panels, and associated systems Conduct electrical and mechanical fault-finding on industrial machinery Support continuous improvement and engineering project work Work with control and instrumentation systems, including temperature sensors, pressure transducers, and flow meters Read and interpret electrical schematics, panel layouts, and technical drawings Troubleshoot PLC hardware faults, ideally with Siemens S7 exposure Maintain high housekeeping, health & safety, and operational compliance standards Report accidents, incidents, and near misses in accordance with company procedures Candidate Requirements HNC in Electrical / Electronic Engineering or equivalent qualification Strong experience in electrical maintenance within industrial, manufacturing, or automated environments Competence in electrical fault diagnosis and maintenance of industrial systems Experience working with MCC panels, motors, drives, and instrumentation systems PLC fault-finding experience preferred BSth Edition qualification advantageous Strong commitment to safety, reliability, and engineering best practice Guidant, Carbon60, Lorien & SRG - The Impellam Group Portfolio are acting as an Employment Business in relation to this vacancy.

Job Title: Senior Engineer - C&I ( Integration, Verification & Validation) Location: Barrow-In-Furness - Hybrid, 2 days every 2 weeks on site We offer a range of hybrid and flexible working arrangements - please speak to your recruiter about the options for this particular role Salary: £42,215+ (DOE) Who we are: Join BAE Systems and you'll be part of something bigger. As a valued member of our global colleague network, you'll bring your unique skills and perspectives to help pioneer progress and protect what matters most. You'll be trusted to play your part in delivering the advanced, technology-led defence, aerospace and security solutions of tomorrow, shaping a safer future, for all of us. From the depths of the ocean, to the far reaches of space, there's no limit to where a career at BAE Systems could take you. Role Description: You'll use your knowledge in Control & Instrumentation and control systems to develop and shape the Integration, Verification and Validation (IV&V) capability for SSNA Platform Complex Systems. You will establish the infrastructure, frameworks and ways of working needed to support the full V-model lifecycle, ensuring robust requirement development, prototyping methods, integration and validation activities that underpin successful system delivery. You'll oversee and support system integration across multi-layered interfaces, resolving cross-discipline tasks while ensuring compliance with contractual, safety and regulatory requirements. Expect to define and assure V&V activities, capture design evidence within requirements tools, review supplier documentation and present technical outputs to stakeholders and customers. You'll also contribute to build, commissioning and acceptance activities, driving collaboration across engineering teams and delivering technical solutions that enable high-quality, fully integrated systems. Core duties: You will apply Instrumentation and Control System experience to support design, integration and delivery of highly detailed systems You'll strategise, support and oversee and support IV&V activities across the engineering lifecycle, ensuring robust verification and validation outcomes You demonstrate considerable understanding of the full lifecycle, from requirements definition through to integration and acceptance You produce clear technical documentation and apply Control Systems knowledge to support engineering strategies and assurance Essential Skills: You hold a BEng (Hons) / MEng or equivalent experience in an engineering discipline or in Control & Instrumentation You can show robust understanding of the full engineering lifecycle, from requirements through to integration and validation You have demonstratable experience delivering IV&V activities and producing clear, structured technical documentation You will possess knowledge in at least one of the following areas, of control systems, PID, fieldbus technologies, prototyping or system integration The SSNA - Platform Complex Systems Team: The team is a growing, high-impact engineering function delivering IV&V and system integration across the SSNA programme. Working across disciplines, the team drives collaboration, resolves intricate tasks and shapes new capabilities-offering excellent development, cross-programme exposure and considerable support toward chartership. We offer relocation support packages across all Submarines roles, subject to meeting eligibility criteria. Why BAE Systems? Here you'll build a career with purpose and limitless possibilities. With lifelong learning and meaningful work, this is a place where you can grow your career with confidence and be empowered to be your best. You'll be recognised for your contribution and enjoy rewards tailored to what's most important to you and your family, support for your financial and personal wellbeing, as well as a balanced lifestyle. In an environment embracing sustainable ways of working and with a strong sense of shared purpose, our supportive culture is a place you can feel you belong and proud of the difference you make. A place where everyone can thrive: We're committed to building an inclusive workplace where everyone feels valued and supported. We know that a diversity of backgrounds, perspectives and experiences strengthens our teams and is vital to the work we do. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date: 31st May 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible.

Excellent opportunity for a Technical Business Development Manager to join a leading specialist in advanced motion control solutions supporting a number of key market sectors. Their product portfolio includes motors, drives, actuators, gearboxes, integrated systems and associated instrumentation. This is a hybrid technical sales and business development role focused on new business generation, strategic account growth and delivering engineered solutions into OEM and test markets across the UK. Key responsibilities for the Technical Business Development Manager role covering the UK: Identify, prospect and win new business opportunities across OEM and test markets Develop and grow pipeline activity to meet and exceed sales and margin targets Deliver technical sales solutions across motors, drives, actuators, gearboxes and motion systems Work closely with Applications Engineers to deliver strategic and technically complex projects Support customers in product design and development with a strong technical bias Manage and expand existing accounts through structured account management Identify and promote cross-selling opportunities across the wider group Maintain accurate CRM records of all sales activities, visits and pipeline progression Liaise with suppliers and group businesses on new projects and product opportunities Negotiate NDAs and contracts where applicable Ensure compliance with company Health & Safety and Quality/ISO standards Key skills required for the Technical Business Development Manager role covering the UK: Proven experience in technical sales or business development Strong background in motors, drives and gearboxes (motion control experience essential) Demonstrated success in new business development and pipeline growth Experience selling into OEM environments Technical qualification in Mechanical or Electrical Engineering (HNC/HND or higher preferred) Confident using CRM systems to manage sales activity Strong IT skills including Excel, Word and PowerPoint Excellent written and verbal communication skills Able to work autonomously while contributing to a collaborative sales team This is a newly created position for a technical business development manager, aligning a specialist motion control product portfolio with strategic growth plans. It offers the opportunity to play a key role in shaping market development while working closely with engineering and technical teams to deliver high-value solutions. APPLY NOW! To apply for the Technical Business Development Manager role covering the whole of the UK, please send your CV to (url removed), or for more information contact Mike Belmar on (phone number removed).

Multi-Skilled Maintenance Technician Location: Middlesbrough (On-site) Shift Pattern: 4 on / 4 off An international manufacturer within the Food / FMCG sector is seeking a Multi-Skilled Maintenance Technician to join its engineering team at a high-performing production facility in Middlesbrough. This is an excellent opportunity to work within a fast-paced manufacturing environment where safety, quality, and operational efficiency are central to business success. The Role Reporting to the Engineering Manager, you will play a key role in maintaining the reliability and performance of automated production equipment. The position involves responding to plant breakdowns, delivering planned preventative maintenance (PPM), and supporting continuous improvement across the site. Key Responsibilities Respond quickly and effectively to plant breakdowns to minimise downtime Deliver planned preventative maintenance activities across production equipment Maintain high standards of health & safety, hygiene, and product integrity Ensure equipment and processes support consistent product quality Work collaboratively with production and engineering teams to maintain operational performance Support continuous improvement initiatives and drive operational efficiencies Maintain clear communication across departments to support production targets About You Electrical and/or mechanical qualification or time-served apprenticeship At least 2 years' experience working in a Food, FMCG, or automated production environment Strong fault-finding and problem-solving skills Good written and verbal communication skills Basic IT skills including Microsoft Office Desirable Skills Knowledge of PLC systems, pneumatics, hydraulics, instrumentation, and temperature control Experience working with automated production or packaging equipment Basic Food Hygiene and Health & Safety awareness Welding or fabrication experience beneficial What's on Offer Opportunity to develop your career within a large global Food / FMCG manufacturer Ongoing training and career development opportunities Competitive salary and benefits package Pension scheme Health plan Staff discount programmes Generous family leave policies

Job Title: Senior Engineer - C&I ( Integration, Verification & Validation) Location: Barrow-In-Furness - Hybrid, 2 days every 2 weeks on site We offer a range of hybrid and flexible working arrangements - please speak to your recruiter about the options for this particular role Salary: £42,215+ (DOE) Who we are: Join BAE Systems and you'll be part of something bigger. As a valued member of our global colleague network, you'll bring your unique skills and perspectives to help pioneer progress and protect what matters most. You'll be trusted to play your part in delivering the advanced, technology-led defence, aerospace and security solutions of tomorrow, shaping a safer future, for all of us. From the depths of the ocean, to the far reaches of space, there's no limit to where a career at BAE Systems could take you. Role Description: You'll use your knowledge in Control & Instrumentation and control systems to develop and shape the Integration, Verification and Validation (IV&V) capability for SSNA Platform Complex Systems. You will establish the infrastructure, frameworks and ways of working needed to support the full V-model lifecycle, ensuring robust requirement development, prototyping methods, integration and validation activities that underpin successful system delivery. You'll oversee and support system integration across multi-layered interfaces, resolving cross-discipline tasks while ensuring compliance with contractual, safety and regulatory requirements. Expect to define and assure V&V activities, capture design evidence within requirements tools, review supplier documentation and present technical outputs to stakeholders and customers. You'll also contribute to build, commissioning and acceptance activities, driving collaboration across engineering teams and delivering technical solutions that enable high-quality, fully integrated systems. Core duties: You will apply Instrumentation and Control System experience to support design, integration and delivery of highly detailed systems You'll strategise, support and oversee and support IV&V activities across the engineering lifecycle, ensuring robust verification and validation outcomes You demonstrate considerable understanding of the full lifecycle, from requirements definition through to integration and acceptance You produce clear technical documentation and apply Control Systems knowledge to support engineering strategies and assurance Essential Skills: You hold a BEng (Hons) / MEng or equivalent experience in an engineering discipline or in Control & Instrumentation You can show robust understanding of the full engineering lifecycle, from requirements through to integration and validation You have demonstratable experience delivering IV&V activities and producing clear, structured technical documentation You will possess knowledge in at least one of the following areas, of control systems, PID, fieldbus technologies, prototyping or system integration The SSNA - Platform Complex Systems Team: The team is a growing, high-impact engineering function delivering IV&V and system integration across the SSNA programme. Working across disciplines, the team drives collaboration, resolves intricate tasks and shapes new capabilities-offering excellent development, cross-programme exposure and considerable support toward chartership. We offer relocation support packages across all Submarines roles, subject to meeting eligibility criteria. Why BAE Systems? Here you'll build a career with purpose and limitless possibilities. With lifelong learning and meaningful work, this is a place where you can grow your career with confidence and be empowered to be your best. You'll be recognised for your contribution and enjoy rewards tailored to what's most important to you and your family, support for your financial and personal wellbeing, as well as a balanced lifestyle. In an environment embracing sustainable ways of working and with a strong sense of shared purpose, our supportive culture is a place you can feel you belong and proud of the difference you make. A place where everyone can thrive: We're committed to building an inclusive workplace where everyone feels valued and supported. We know that a diversity of backgrounds, perspectives and experiences strengthens our teams and is vital to the work we do. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date: 31st May 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible.

Job Title: Senior Engineer - C&I ( Integration, Verification & Validation) Location: Barrow-In-Furness - Hybrid, 2 days every 2 weeks on site We offer a range of hybrid and flexible working arrangements - please speak to your recruiter about the options for this particular role Salary: £42,215+ (DOE) Who we are: Join BAE Systems and you'll be part of something bigger. As a valued member of our global colleague network, you'll bring your unique skills and perspectives to help pioneer progress and protect what matters most. You'll be trusted to play your part in delivering the advanced, technology-led defence, aerospace and security solutions of tomorrow, shaping a safer future, for all of us. From the depths of the ocean, to the far reaches of space, there's no limit to where a career at BAE Systems could take you. Role Description: You'll use your knowledge in Control & Instrumentation and control systems to develop and shape the Integration, Verification and Validation (IV&V) capability for SSNA Platform Complex Systems. You will establish the infrastructure, frameworks and ways of working needed to support the full V-model lifecycle, ensuring robust requirement development, prototyping methods, integration and validation activities that underpin successful system delivery. You'll oversee and support system integration across multi-layered interfaces, resolving cross-discipline tasks while ensuring compliance with contractual, safety and regulatory requirements. Expect to define and assure V&V activities, capture design evidence within requirements tools, review supplier documentation and present technical outputs to stakeholders and customers. You'll also contribute to build, commissioning and acceptance activities, driving collaboration across engineering teams and delivering technical solutions that enable high-quality, fully integrated systems. Core duties: You will apply Instrumentation and Control System experience to support design, integration and delivery of highly detailed systems You'll strategise, support and oversee and support IV&V activities across the engineering lifecycle, ensuring robust verification and validation outcomes You demonstrate considerable understanding of the full lifecycle, from requirements definition through to integration and acceptance You produce clear technical documentation and apply Control Systems knowledge to support engineering strategies and assurance Essential Skills: You hold a BEng (Hons) / MEng or equivalent experience in an engineering discipline or in Control & Instrumentation You can show robust understanding of the full engineering lifecycle, from requirements through to integration and validation You have demonstratable experience delivering IV&V activities and producing clear, structured technical documentation You will possess knowledge in at least one of the following areas, of control systems, PID, fieldbus technologies, prototyping or system integration The SSNA - Platform Complex Systems Team: The team is a growing, high-impact engineering function delivering IV&V and system integration across the SSNA programme. Working across disciplines, the team drives collaboration, resolves intricate tasks and shapes new capabilities-offering excellent development, cross-programme exposure and considerable support toward chartership. We offer relocation support packages across all Submarines roles, subject to meeting eligibility criteria. Why BAE Systems? Here you'll build a career with purpose and limitless possibilities. With lifelong learning and meaningful work, this is a place where you can grow your career with confidence and be empowered to be your best. You'll be recognised for your contribution and enjoy rewards tailored to what's most important to you and your family, support for your financial and personal wellbeing, as well as a balanced lifestyle. In an environment embracing sustainable ways of working and with a strong sense of shared purpose, our supportive culture is a place you can feel you belong and proud of the difference you make. A place where everyone can thrive: We're committed to building an inclusive workplace where everyone feels valued and supported. We know that a diversity of backgrounds, perspectives and experiences strengthens our teams and is vital to the work we do. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date: 31st May 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible.

Role: Senior Software Engineer Location: Royston (Onsite) Salary: Up to 65,000 DOE A growing, innovation-led biotechnology company based in the Cambridge area is seeking a Senior Software Engineer to support the development of advanced instrumentation platforms used in cutting-edge scientific research. This is a fantastic opportunity to work on complex systems that combine software, hardware, and data analysis to deliver real-world impact in life sciences. You'll play a key role in designing and developing high-quality application and control software across Windows and Linux environments, working closely with multidisciplinary teams in a collaborative setting. Key Responsibilities: Design and develop data collection and analysis software (Python and TypeScript) Contribute to instrument control software (C#) and embedded systems (C++) Support full software lifecycle including testing, release, and maintenance Collaborate with cross-functional teams and support documentation and training Skills & Experience: 5+ years' software engineering experience Strong skills in Python and TypeScript Experience with C#, C++, and cross-platform development (Windows/Linux) Knowledge of CI/CD and agile methodologies Background in scientific, biotech, or complex systems environments (desirable) If you're interested in finding out the details, please reach out to Fintan at TEC Partners for more information.

Electrical Engineering Manager / Lead Electrical Engineer (Hands on) Surrey, UK Permanent £Competitive salary plus attractive benefits ARCA Resourcing is proud to partner with an innovative technology company operating at the forefront of clean energy and advanced power systems. This is a fantastic opportunity for an Electrical Engineering Manager who wishes to remain hands on technical, or a Lead Engineer seeking to step into a hands-on technical management position. You will lead a highly skilled electrical engineering function delivering cutting-edge projects within a fast-paced engineering environment. This is an exceptional opportunity for a technically strong lead engineer who combines hands-on electrical engineering expertise with team management capability. The successful candidate will play a pivotal role in leading electrical developments across complex systems while helping shape the future of sustainable energy technologies. The Opportunity As Electrical Engineering Manager, you will lead and develop the Electrical Engineering Team, ensuring the successful delivery of electrical systems across multiple engineering projects. You will oversee resource planning, technical delivery, quality standards, and engineering governance while remaining actively involved in system architecture, design, integration, and verification activities. Working closely with multidisciplinary engineering and scientific teams, you'll contribute to the development of highly innovative technologies in an environment that encourages technical excellence, collaboration, and continuous improvement. Key Responsibilities Team Leadership & Management Lead, manage, and support the Electrical Engineering Team Define team scope, responsibilities, processes, and engineering standards Assess and allocate engineering resources across projects Ensure engineering capability and skills are aligned with business requirements Mentor, coach, and support the professional development of engineers within the team Ensure compliance with all health & safety requirements and engineering best practice Technical Delivery Lead electrical engineering developments and project deliverables Capture requirements and define system-level electrical architectures Undertake system trade studies and electrical design decisions Develop single line diagrams, wiring schematics, and detailed electrical designs Produce technical specifications for electrical components, motors, transformers, wiring, and circuit protection Generate technical documentation for internal teams and external contractors Support product compliance, validation, and configuration control activities Produce design documentation suitable for manufacturing and integration Collaborate with multidisciplinary engineering teams to ensure successful system integration What We're Looking For Degree qualified in Electrical Engineering or a related engineering discipline Extensive experience in electrical system design, instrumentation, and control panel design Schematic design Strong leadership and team management experience within an engineering environment Detailed knowledge of BS7671:2018 Experience designing systems compliant with EN 60204 Experience with PLC systems, particularly Siemens hardware and software Understanding of hazardous area / ATEX environments Strong practical fault-finding and electrical hardware design capability Excellent communication and stakeholder management skills Comfortable working in a fast-paced, innovative engineering environment Proficient in Microsoft Office and engineering documentation practices Desirable Functional safety experience Experience working within or designing for hazardous area / ATEX environments Why Join? Lead a talented engineering team within an exciting high-growth technology sector Work on pioneering clean energy and advanced power technologies Influence major engineering projects from concept through to deployment Collaborative and innovative culture with strong technical focus Excellent long-term career progression opportunities Opportunity to work on international projects and cutting-edge systems If you are an experienced Electrical Engineering leader looking for your next challenge in a highly innovative environment, we'd love to hear from you. If you would like to apply, please click on the link to apply!

Earn great money working as an Electronic or Electrical Service Engineer to install, commission, fault find and repair instrumentation, and automation systems for the marine industry. Field based, but commutable to customers around the South West. We offer an excellent basic salary, lots of overtime and great earning potential for an Engineer who is happy to stay away across the UK on one to two week projects at a time. SALARY: Up to £65,000 BENEFITS: Overtime on all work over 37 hours (with premium for weekend / bank holidays) Company vehicle Annual bonus Holiday allowance which increases with overtime Private healthcare Pension. LOCATION: Cornwall / Devon COMMUTABLE LOCATIONS: Penzance, Newquay, Falmouth, Bude, Truro, Bodmin, Plymouth, Exeter, Taunton, Torquay, Crediton, Yeovil, Weymouth, Minehead, Bristol WHY SHOULD I APPLY? We're a profitable and developing company. Now is a great time to join us! Our generous overtime means you can earn an excellent salary. Planned work! You'll know where you'll be, when, and for how long. Take control of your life and schedule. Be part of a team of experts and become an expert yourself in a niche field. JOB SPECIFICATION: Electrical Engineer, Electronic Service Engineer : Instrumentation, PLC Control and Automation Systems - Marine Industry This is a field based Electronic / Electrical Service Engineer vacancy for a very well established and respected specialist in instrumentation, PLC control and automation systems to the marine industry. This role will be split between (80%) scheduled electrical / electronic installation, commissioning and refit projects - typically staying away for 10-14 days at sites across the UK - but with a heavy focus on customers around Falmouth / Devonport. The remainder (20%) will be reactionary fault finding and repair (1-2 day trips) on first and third party instrumentation, PLC controls and automation equipment or machinery. The majority of work will be in the UK, though you will work on international projects - perhaps 6 weeks per year and including trips to Gibraltar, UAE, Bahrain and USA. REQUIREMENTS: Electrical Engineer, Electronic Service Engineer : Instrumentation, PLC Control and Automation Systems - Marine Industry We require a practical, hands on Engineer with a track record as an electronic or electrical Service / Maintenance Engineer in an industrial setting. A good, practical grasp of electronic engineering is required. Any experience / familiarity with temperature, pressure & level measurement would be an advantage. As would, to a lesser extent, Allen Bradley and Siemens PLC Programming and Maintenance experience. You must be flexible and prepared to travel and stay away as required. THE COMPANY: We are a well established and recognised company - specialising in a niche field of Instrumentation, PLC Control and Automation Systems to the Marine Industry - with an excellent reputation. This role has come about as a result of our continued growth and development. PROSPECTS: Excellent earning potential in this role. We also have a track record of promoting from within where possible. It is highly likely you will have worked in any of the following roles and/or markets, and worked with the following products and/or services: Controls Engineer, Service Engineer, Maintenance Engineer, Electronic Engineer, Electrical Engineer, Process Engineer, Installation Engineer, Commissioning Engineer, Applications Engineer - Electrical, Electronic, Instrumentation, PLC Control Systems, Automation Systems, Marine Industry, Industrial Engineering, Automation, Siemens, Allen Bradley, Temperature, Pressure, Level Measurement Please Note - We have been selected as the exclusive retained partner for this role so any direct applications to our client from candidates or agencies will be forwarded on to us direct. REF: SP18470, Wallace Hind Selection

Earn great money working as an Electronic or Electrical Service Engineer to install, commission, fault find and repair instrumentation, and automation systems for the marine industry. Field based, but commutable to customers around the South West. We offer an excellent basic salary, lots of overtime and great earning potential for an Engineer who is happy to stay away across the UK on one to two week projects at a time. SALARY: Up to £65,000 BENEFITS: Overtime on all work over 37 hours (with premium for weekend / bank holidays) Company vehicle Annual bonus Holiday allowance which increases with overtime Private healthcare Pension. LOCATION: Cornwall / Devon COMMUTABLE LOCATIONS: Penzance, Newquay, Falmouth, Bude, Truro, Bodmin, Plymouth, Exeter, Taunton, Torquay, Crediton, Yeovil, Weymouth, Minehead, Bristol WHY SHOULD I APPLY? We're a profitable and developing company. Now is a great time to join us! Our generous overtime means you can earn an excellent salary. Planned work! You'll know where you'll be, when, and for how long. Take control of your life and schedule. Be part of a team of experts and become an expert yourself in a niche field. JOB SPECIFICATION: Electrical Engineer, Electronic Service Engineer : Instrumentation, PLC Control and Automation Systems - Marine Industry This is a field based Electronic / Electrical Service Engineer vacancy for a very well established and respected specialist in instrumentation, PLC control and automation systems to the marine industry. This role will be split between (80%) scheduled electrical / electronic installation, commissioning and refit projects - typically staying away for 10-14 days at sites across the UK - but with a heavy focus on customers around Falmouth / Devonport. The remainder (20%) will be reactionary fault finding and repair (1-2 day trips) on first and third party instrumentation, PLC controls and automation equipment or machinery. The majority of work will be in the UK, though you will work on international projects - perhaps 6 weeks per year and including trips to Gibraltar, UAE, Bahrain and USA. REQUIREMENTS: Electrical Engineer, Electronic Service Engineer : Instrumentation, PLC Control and Automation Systems - Marine Industry We require a practical, hands on Engineer with a track record as an electronic or electrical Service / Maintenance Engineer in an industrial setting. A good, practical grasp of electronic engineering is required. Any experience / familiarity with temperature, pressure & level measurement would be an advantage. As would, to a lesser extent, Allen Bradley and Siemens PLC Programming and Maintenance experience. You must be flexible and prepared to travel and stay away as required. THE COMPANY: We are a well established and recognised company - specialising in a niche field of Instrumentation, PLC Control and Automation Systems to the Marine Industry - with an excellent reputation. This role has come about as a result of our continued growth and development. PROSPECTS: Excellent earning potential in this role. We also have a track record of promoting from within where possible. It is highly likely you will have worked in any of the following roles and/or markets, and worked with the following products and/or services: Controls Engineer, Service Engineer, Maintenance Engineer, Electronic Engineer, Electrical Engineer, Process Engineer, Installation Engineer, Commissioning Engineer, Applications Engineer - Electrical, Electronic, Instrumentation, PLC Control Systems, Automation Systems, Marine Industry, Industrial Engineering, Automation, Siemens, Allen Bradley, Temperature, Pressure, Level Measurement Please Note - We have been selected as the exclusive retained partner for this role so any direct applications to our client from candidates or agencies will be forwarded on to us direct. REF: SP18470, Wallace Hind Selection

Earn great money working as an Electronic or Electrical Service Engineer to install, commission, fault find and repair instrumentation, and automation systems for the marine industry. Field based, but commutable to customers around the South West. We offer an excellent basic salary, lots of overtime and great earning potential for an Engineer who is happy to stay away across the UK on one to two week projects at a time. SALARY: Up to £65,000 BENEFITS: Overtime on all work over 37 hours (with premium for weekend / bank holidays) Company vehicle Annual bonus Holiday allowance which increases with overtime Private healthcare Pension. LOCATION: Cornwall / Devon COMMUTABLE LOCATIONS: Penzance, Newquay, Falmouth, Bude, Truro, Bodmin, Plymouth, Exeter, Taunton, Torquay, Crediton, Yeovil, Weymouth, Minehead, Bristol WHY SHOULD I APPLY? We're a profitable and developing company. Now is a great time to join us! Our generous overtime means you can earn an excellent salary. Planned work! You'll know where you'll be, when, and for how long. Take control of your life and schedule. Be part of a team of experts and become an expert yourself in a niche field. JOB SPECIFICATION: Electrical Engineer, Electronic Service Engineer : Instrumentation, PLC Control and Automation Systems - Marine Industry This is a field based Electronic / Electrical Service Engineer vacancy for a very well established and respected specialist in instrumentation, PLC control and automation systems to the marine industry. This role will be split between (80%) scheduled electrical / electronic installation, commissioning and refit projects - typically staying away for 10-14 days at sites across the UK - but with a heavy focus on customers around Falmouth / Devonport. The remainder (20%) will be reactionary fault finding and repair (1-2 day trips) on first and third party instrumentation, PLC controls and automation equipment or machinery. The majority of work will be in the UK, though you will work on international projects - perhaps 6 weeks per year and including trips to Gibraltar, UAE, Bahrain and USA. REQUIREMENTS: Electrical Engineer, Electronic Service Engineer : Instrumentation, PLC Control and Automation Systems - Marine Industry We require a practical, hands on Engineer with a track record as an electronic or electrical Service / Maintenance Engineer in an industrial setting. A good, practical grasp of electronic engineering is required. Any experience / familiarity with temperature, pressure & level measurement would be an advantage. As would, to a lesser extent, Allen Bradley and Siemens PLC Programming and Maintenance experience. You must be flexible and prepared to travel and stay away as required. THE COMPANY: We are a well established and recognised company - specialising in a niche field of Instrumentation, PLC Control and Automation Systems to the Marine Industry - with an excellent reputation. This role has come about as a result of our continued growth and development. PROSPECTS: Excellent earning potential in this role. We also have a track record of promoting from within where possible. It is highly likely you will have worked in any of the following roles and/or markets, and worked with the following products and/or services: Controls Engineer, Service Engineer, Maintenance Engineer, Electronic Engineer, Electrical Engineer, Process Engineer, Installation Engineer, Commissioning Engineer, Applications Engineer - Electrical, Electronic, Instrumentation, PLC Control Systems, Automation Systems, Marine Industry, Industrial Engineering, Automation, Siemens, Allen Bradley, Temperature, Pressure, Level Measurement Please Note - We have been selected as the exclusive retained partner for this role so any direct applications to our client from candidates or agencies will be forwarded on to us direct. REF: SP18470, Wallace Hind Selection

Earn great money working as an Electronic or Electrical Service Engineer to install, commission, fault find and repair instrumentation, and automation systems for the marine industry. Field based, but commutable to customers around the South West. We offer an excellent basic salary, lots of overtime and great earning potential for an Engineer who is happy to stay away across the UK on one to two week projects at a time. SALARY: Up to £65,000 BENEFITS: Overtime on all work over 37 hours (with premium for weekend / bank holidays) Company vehicle Annual bonus Holiday allowance which increases with overtime Private healthcare Pension. LOCATION: Cornwall / Devon COMMUTABLE LOCATIONS: Penzance, Newquay, Falmouth, Bude, Truro, Bodmin, Plymouth, Exeter, Taunton, Torquay, Crediton, Yeovil, Weymouth, Minehead, Bristol WHY SHOULD I APPLY? We're a profitable and developing company. Now is a great time to join us! Our generous overtime means you can earn an excellent salary. Planned work! You'll know where you'll be, when, and for how long. Take control of your life and schedule. Be part of a team of experts and become an expert yourself in a niche field. JOB SPECIFICATION: Electrical Engineer, Electronic Service Engineer : Instrumentation, PLC Control and Automation Systems - Marine Industry This is a field based Electronic / Electrical Service Engineer vacancy for a very well established and respected specialist in instrumentation, PLC control and automation systems to the marine industry. This role will be split between (80%) scheduled electrical / electronic installation, commissioning and refit projects - typically staying away for 10-14 days at sites across the UK - but with a heavy focus on customers around Falmouth / Devonport. The remainder (20%) will be reactionary fault finding and repair (1-2 day trips) on first and third party instrumentation, PLC controls and automation equipment or machinery. The majority of work will be in the UK, though you will work on international projects - perhaps 6 weeks per year and including trips to Gibraltar, UAE, Bahrain and USA. REQUIREMENTS: Electrical Engineer, Electronic Service Engineer : Instrumentation, PLC Control and Automation Systems - Marine Industry We require a practical, hands on Engineer with a track record as an electronic or electrical Service / Maintenance Engineer in an industrial setting. A good, practical grasp of electronic engineering is required. Any experience / familiarity with temperature, pressure & level measurement would be an advantage. As would, to a lesser extent, Allen Bradley and Siemens PLC Programming and Maintenance experience. You must be flexible and prepared to travel and stay away as required. THE COMPANY: We are a well established and recognised company - specialising in a niche field of Instrumentation, PLC Control and Automation Systems to the Marine Industry - with an excellent reputation. This role has come about as a result of our continued growth and development. PROSPECTS: Excellent earning potential in this role. We also have a track record of promoting from within where possible. It is highly likely you will have worked in any of the following roles and/or markets, and worked with the following products and/or services: Controls Engineer, Service Engineer, Maintenance Engineer, Electronic Engineer, Electrical Engineer, Process Engineer, Installation Engineer, Commissioning Engineer, Applications Engineer - Electrical, Electronic, Instrumentation, PLC Control Systems, Automation Systems, Marine Industry, Industrial Engineering, Automation, Siemens, Allen Bradley, Temperature, Pressure, Level Measurement Please Note - We have been selected as the exclusive retained partner for this role so any direct applications to our client from candidates or agencies will be forwarded on to us direct. REF: SP18470, Wallace Hind Selection

Ready to kick-start your future in engineering? Join as an Instrumentation, Control & Automation (ICA) Engineering Apprentice and gain hands-on experience supporting the UK's largest water and wastewater provider. Work with skilled engineers to develop advanced skills in electrical engineering, control systems, and automation, while earning a Level 6 Control Systems BEng Applied Professional Engineering qualification. What you'll be doing as an ICA Apprentice: Design, maintain, and optimise ICA systems, including sensors, actuators, and control loops for water and wastewater treatment Work on electrical installations, fault diagnosis, and maintenance of control panels, PLCs, and SCADA systems Use advanced control technologies to monitor plant performance, troubleshoot issues, and implement improvements Contribute to engineering projects, including upgrades and new installations, ensuring compliance with safety and regulatory standards Learn to integrate smart technologies and automation solutions to improve operational efficiency Apply Thames Water's safety protocols and champion best practices in electrical and ICA work Where you'll work: Location: Clearwater Court, Reading RG1 8DB- Hybrid Hours: 36-hour week over four working days plus one training day Start date: September 2026 Training and qualification : You'll study with Warwick University, a leading UK engineering training provider, through a mix of 2.5-day block-release sessions and online learning across each 12-week semester. Qualification achieved: Level 6 Apprenticeship Standard in Control Systems- BEng Applied Professional Engineering Duration: Permanent contract with a 48-54 month structured programme What you should bring to the role 5 GCSEs including Maths and English (grade 9-4 / A-C) 112 UCAS points, including A-Level Maths with a minimum grade B Travel required across Thames Water sites Good time management and communication skills Able to work well in a team and independently What's in it for you? Excellent salary: £23,500 annum Annual Leave: 24 days holiday per year, increasing to 28 with the length of service (plus bank holidays) Performance-related pay plan directly linked to company performance measures and targets Generous Pension Scheme through AON Access to lots of benefits to help you take care of you and your family's health and wellbeing, and your finances - from annual health MOTs and access to physiotherapy and counselling, to Cycle to Work schemes, shopping vouchers and life assurance. Find out more about our benefits and perks (Please note different T&Cs apply if on secondment) Who are we? We're the UK's largest water and wastewater company, with more than 16 million customers relying on us every day to supply water for their taps and toilets. We want to build a better future for all, helping our customers, communities, people, and the planet to thrive. It's a big job and we've got a long way to go, so we need help from passionate and skilled people, committed to making a difference and getting us to where we want to be in the years and decades to come. Learn more about our purpose and values Working at Thames Wate r Thames Water is a unique, rewarding, and diverse place to work, where every day you can make a difference, yet no day is the same. As part of our family, you'll enjoy meaningful career opportunities, flexible working arrangements and excellent benefits.If you're looking for a sustainable and successful career where you can make a daily difference to millions of people's lives while helping to protect the world of water for future generations, we'll be here to support you every step of the way. Together, we can build a better future for our customers, our region, and our planet.Real purpose, real support, real opportunities. Come and join the Thames Water family. Why choose us? Learn more.We're committed to being a great, diverse, and inclusive place to work. We welcome applications from everyone and want to ensure you feel supported throughout the recruitment process. If you need any adjustments, whether that's extra time, accessible formats, or anything else, just let us know. We're here to help and support.When a crisis happens, we all rally around to support our customers. As part of Team Thames, you'll have the opportunity to sign up to support our customers on the frontline as an ambassador. Full training will be given for what is undoubtedly an incredibly rewarding experience. It's also a great opportunity to learn more about our business and meet colleagues. Disclaimer: Due to the high volume of applications we receive, we may close the advert earlier than the advertised date, so we encourage you to apply as soon as possible to avoid disappointment.