Graduate Engineer - Great Yarmouth, Sizewell B and Sizewell C. We are looking for talented engineers who are graduating, or are recently graduated, to join the Risktec team at our Office in Great Yarmouth, Sizewell B & Sizewell C Nuclear Power Stations. Candidates must have a clear interest in a career in the nuclear industry and has a drive to work and learn valuable engineering skills in a dynamic environment. We require a Graduate Engineer, who is local to the area or is genuinely willing to relocate to this area, this is vital as commuting between the 3 locations requires you to be in situ to the location. No hybrid working is offered for this role. The ideal Graduate will work alongside experienced Systems Engineers to support the safe and reliable operation of several complex engineering systems on site. Disciplines Considered We will consider engineers who are graduating in Civil engineering, or have graduated in the following disciplines at minimum BEng or BSc level: Electrical and Electronic Engineering C&I Control and Instrumentation Mechanical Engineering Chemical Engineering Physics and Nuclear Physics Other disciplines where modules have been covered in Nuclear Operations/Engineering will also be considered. Engineers who have been graduated for over 1 year and have relevant experience will also be considered. Duration of Position Full-time (38h/week) with an initial fixed duration of 1 years with a view to make permanent. The Role We are seeking talented engineers who are graduating or have recently graduated to join our collaborative team based in Great Yarmouth and onsite at Sizewell B/C. The successful candidates will support the delivery of construction engineering, safety case updates and project management to several major projects within the nuclear power generation sector. Such projects include site wide modifications at Sizewell B, civil engineering projects to support the construction of Sizewell C and safety case work for EDF Design Authority. Across the Risktec south of England nuclear wider team individuals are involved in work supporting commissioning activities at Hinkley Point C and safety case documentation for Small Module Reactor Generic Design Assessments. Role Description and Responsibilities This role provides an opportunity to be part of an exciting, dynamic, and rapidly growing nuclear team across the south of England. Typical responsibilities may include: Supporting the delivery of major construction-based safety cases. Providing specialist civil/structural input and advice to resolve construction problems. Facilitating hazard identification in cooperation with CDM regulations and optioneering workshops. Production of formal technical reports, safety cases and other project deliverables on time and to budget. Implementation of modifications to site, including Supporting construction team and client during the construction process through problem solving. Supporting the build of safety case through justification of design. Reviewing design proposals and producing design substantiation reports. Authoring testing and commissioning strategies and functional test procedures. Support to plant operability, including: Condition monitoring and identification of plant faults. Supporting equipment reliability reviews, including plant walk downs. Reviewing maintenance routines/strategy. Management of projects, project teams and interfacing with clients. As part of this role, you will gain a broad and in depth understanding of risk management, design and operations within a large generating site. Security Clearance Checks Due to the nature of the work, candidates must have a suitable background and a valid UK working status that will allow them to achieve UK security clearance. (please note that this is very difficult to achieve within the timescales for non-UK nationals, and all applicants will be subject to a screening process prior to interview to ensure that you meet the security clearance criteria). By applying for this role, you will be agreeing to undertake initial security clearance screening and will be asked to provide evidence of your eligibility for security clearance. Other Requirements This opportunity has high visibility and maintains a valuable profile for us through which you will form part of our client facing team as such, excellent interpersonal and written skills are required. It is also essential that you have your own transport and a clean driving license. Salary Package A competitive package is offered with benefits. How to Apply We are looking for driven and conscientious individuals to form a part of one of our site based teams. If you feel you have the ability, aptitude and ambition to join us, please send us your CV and cover letter including your achievements and background stating why you are a strong fit for this role. Successful Graduate The successful graduate will be based at Great Yarmouth Risktec, Sizewell B and Sizewell C Nuclear Power Stations, working for our major nuclear client and you will be mentored and managed by Principal Engineers from Risktec Solutions Ltd. Travel and Location This role is based at Great Yarmouth Risktec, and you will be expected to work between this site and Sizewell B and Sizewell C Power Stations. Please ensure that you have made yourself aware of these locations and that you have considered your travel and accommodation arrangements to and from work when applying. No hybrid working is offered for this role. If successful to interview you will be expected to travel to our Great Yarmouth to attend an interview.
Jun 13, 2026
Full time
Graduate Engineer - Great Yarmouth, Sizewell B and Sizewell C. We are looking for talented engineers who are graduating, or are recently graduated, to join the Risktec team at our Office in Great Yarmouth, Sizewell B & Sizewell C Nuclear Power Stations. Candidates must have a clear interest in a career in the nuclear industry and has a drive to work and learn valuable engineering skills in a dynamic environment. We require a Graduate Engineer, who is local to the area or is genuinely willing to relocate to this area, this is vital as commuting between the 3 locations requires you to be in situ to the location. No hybrid working is offered for this role. The ideal Graduate will work alongside experienced Systems Engineers to support the safe and reliable operation of several complex engineering systems on site. Disciplines Considered We will consider engineers who are graduating in Civil engineering, or have graduated in the following disciplines at minimum BEng or BSc level: Electrical and Electronic Engineering C&I Control and Instrumentation Mechanical Engineering Chemical Engineering Physics and Nuclear Physics Other disciplines where modules have been covered in Nuclear Operations/Engineering will also be considered. Engineers who have been graduated for over 1 year and have relevant experience will also be considered. Duration of Position Full-time (38h/week) with an initial fixed duration of 1 years with a view to make permanent. The Role We are seeking talented engineers who are graduating or have recently graduated to join our collaborative team based in Great Yarmouth and onsite at Sizewell B/C. The successful candidates will support the delivery of construction engineering, safety case updates and project management to several major projects within the nuclear power generation sector. Such projects include site wide modifications at Sizewell B, civil engineering projects to support the construction of Sizewell C and safety case work for EDF Design Authority. Across the Risktec south of England nuclear wider team individuals are involved in work supporting commissioning activities at Hinkley Point C and safety case documentation for Small Module Reactor Generic Design Assessments. Role Description and Responsibilities This role provides an opportunity to be part of an exciting, dynamic, and rapidly growing nuclear team across the south of England. Typical responsibilities may include: Supporting the delivery of major construction-based safety cases. Providing specialist civil/structural input and advice to resolve construction problems. Facilitating hazard identification in cooperation with CDM regulations and optioneering workshops. Production of formal technical reports, safety cases and other project deliverables on time and to budget. Implementation of modifications to site, including Supporting construction team and client during the construction process through problem solving. Supporting the build of safety case through justification of design. Reviewing design proposals and producing design substantiation reports. Authoring testing and commissioning strategies and functional test procedures. Support to plant operability, including: Condition monitoring and identification of plant faults. Supporting equipment reliability reviews, including plant walk downs. Reviewing maintenance routines/strategy. Management of projects, project teams and interfacing with clients. As part of this role, you will gain a broad and in depth understanding of risk management, design and operations within a large generating site. Security Clearance Checks Due to the nature of the work, candidates must have a suitable background and a valid UK working status that will allow them to achieve UK security clearance. (please note that this is very difficult to achieve within the timescales for non-UK nationals, and all applicants will be subject to a screening process prior to interview to ensure that you meet the security clearance criteria). By applying for this role, you will be agreeing to undertake initial security clearance screening and will be asked to provide evidence of your eligibility for security clearance. Other Requirements This opportunity has high visibility and maintains a valuable profile for us through which you will form part of our client facing team as such, excellent interpersonal and written skills are required. It is also essential that you have your own transport and a clean driving license. Salary Package A competitive package is offered with benefits. How to Apply We are looking for driven and conscientious individuals to form a part of one of our site based teams. If you feel you have the ability, aptitude and ambition to join us, please send us your CV and cover letter including your achievements and background stating why you are a strong fit for this role. Successful Graduate The successful graduate will be based at Great Yarmouth Risktec, Sizewell B and Sizewell C Nuclear Power Stations, working for our major nuclear client and you will be mentored and managed by Principal Engineers from Risktec Solutions Ltd. Travel and Location This role is based at Great Yarmouth Risktec, and you will be expected to work between this site and Sizewell B and Sizewell C Power Stations. Please ensure that you have made yourself aware of these locations and that you have considered your travel and accommodation arrangements to and from work when applying. No hybrid working is offered for this role. If successful to interview you will be expected to travel to our Great Yarmouth to attend an interview.
What Are We Looking For Following continued success, our Treatment Solutions team in Muir of Ord are looking for a Production Project Engineer with a keen interest in project delivery to join us on a permanent basis. You will be responsible for the delivery of projects and manage the performance of projects end-to-end, whilst working with our internal stakeholders to ensure client needs are met. This position would ideally suit someone with the ambition to take on challenges and deliver results, with the support of an experienced team. You ll be afforded the opportunity to be at the forefront of engaging with clients for our various frameworks, as well as benefit from access to an in-house design team to provide technical solutions in real-time. Some Of Your Key Duties Include: Project liaison from enquiry stage to final acceptance and documentation, meeting with Clients as required to discuss specific requirements and carry out site surveys as required. Instructing, directing, controlling and allocating work to Trade Operatives & Apprentices, with attention to quality, productivity and safety. Ensure all technical information is available when required for the delivery of design and/or construction. Interpret and check drawings, specifications and schedules for all activities, directing works accordingly & prepare final documentation (As Built Drawings etc.). Early Identification and resolution of non-conformance within both the design and construction phase Manage the design of systems and products, ensuring alignment with design specifications and technical aspects. Completion of contract documents Management of Project Quality deliverables and procedures ensuring compliance with Internal and Client Quality Systems. Input to Tender, design and construction programmes including progress updates and reporting. Subcontractor liaison, management including tender specification, quotation and H&S documentation review and appraisal. Preparation of Construction Phase Health and Safety Plans for projects with Principal Contractor responsibility under CDM. What Do You Need? Qualification to degree / HND/ HNC in Engineering Systems. Good time management, with the ability to multitask, plan and organise day to day workloads within a busy environment. Good communication skills in both verbal and written communication and ability to follow, interpret and explain technical instructions. Knowledge of the tools, equipment, and materials common to all engineering trades, particularly Mechanical, Electrical and Civil Engineering. Driven, with an ability to work individually and with teams under your direction. Innovative thinking, with and ability to learn, understand, and apply new technologies. Ability to effectively prioritise and execute tasks in a high-pressure environment. Full UK Driving Licence. Who Are We? RSE is a trusted clean water technology company, developing market leading products and solutions for purifying drinking water, recycling wastewater and cleaning water in industrial processes. We are disrupting the water sector, delivering water treatment products, technologies, and services to clients across the UK. RSE provides offsite modular build solutions using a low-carbon approach compared to traditional construction methods and our unique offering to the market focuses on innovation, efficiency, and excellence. Established in 1982, RSE has grown into one of the most prominent MEICA engineering businesses in the UK water industry. We have created a complete in-house and full-service capability from project inception through to design, fabrication, and delivery by means of installation and commissioning. We additionally have one of the largest servicing and maintenance teams in the market, to ensure we re on hand for all our clients needs. Our service offering presents industry-leading innovative solutions and our dedicated staff play a key role in delivering our sustainability and wider business goals. With over 2000 staff across our group of companies, our strategic ambition will see the business continue to grow as we expand our operations and diversify our products. One of RSE s key focuses is driving servant leadership and giving our people the opportunity and responsibility to take an entrepreneurial approach in their career development. What RSE Offer To build successful teams and drive the level of quality that RSE is renowned for, we know we need the best people in the industry. Not only do we require the relevant skillsets, but we also need people with the right attitude and mentality to thrive and grow in an innovative and fast-paced environment. At RSE, you ll be given every opportunity to set the path of your own career through our Business Streams and work within dynamic teams that will require you to rise to the challenge of working for a market leader. Industry-leading salary based on your experience. A flexible career development path, with no restrictions on where your career can go. Holiday Allowance of 31 days per year, rising to 33 days per year after 2 years service. Holiday Buy / Sell Scheme Company Pension Scheme Cycle to Work Discounted National Gym Membership Professional Fees Paid Employee Discount Platform EV/Hybrid Car Lease Scheme Access to our network of health professionals including mental health champions and Occupational Health Nurse. In a flourishing sector where there are vast career opportunities available, we believe by leading transformation in the industry our offering to the market means our people have the space to thrive. If you re interested in a career with a company that will harness your skills and provide you with the support to create your own future within the water industry, apply now.
Jun 13, 2026
Full time
What Are We Looking For Following continued success, our Treatment Solutions team in Muir of Ord are looking for a Production Project Engineer with a keen interest in project delivery to join us on a permanent basis. You will be responsible for the delivery of projects and manage the performance of projects end-to-end, whilst working with our internal stakeholders to ensure client needs are met. This position would ideally suit someone with the ambition to take on challenges and deliver results, with the support of an experienced team. You ll be afforded the opportunity to be at the forefront of engaging with clients for our various frameworks, as well as benefit from access to an in-house design team to provide technical solutions in real-time. Some Of Your Key Duties Include: Project liaison from enquiry stage to final acceptance and documentation, meeting with Clients as required to discuss specific requirements and carry out site surveys as required. Instructing, directing, controlling and allocating work to Trade Operatives & Apprentices, with attention to quality, productivity and safety. Ensure all technical information is available when required for the delivery of design and/or construction. Interpret and check drawings, specifications and schedules for all activities, directing works accordingly & prepare final documentation (As Built Drawings etc.). Early Identification and resolution of non-conformance within both the design and construction phase Manage the design of systems and products, ensuring alignment with design specifications and technical aspects. Completion of contract documents Management of Project Quality deliverables and procedures ensuring compliance with Internal and Client Quality Systems. Input to Tender, design and construction programmes including progress updates and reporting. Subcontractor liaison, management including tender specification, quotation and H&S documentation review and appraisal. Preparation of Construction Phase Health and Safety Plans for projects with Principal Contractor responsibility under CDM. What Do You Need? Qualification to degree / HND/ HNC in Engineering Systems. Good time management, with the ability to multitask, plan and organise day to day workloads within a busy environment. Good communication skills in both verbal and written communication and ability to follow, interpret and explain technical instructions. Knowledge of the tools, equipment, and materials common to all engineering trades, particularly Mechanical, Electrical and Civil Engineering. Driven, with an ability to work individually and with teams under your direction. Innovative thinking, with and ability to learn, understand, and apply new technologies. Ability to effectively prioritise and execute tasks in a high-pressure environment. Full UK Driving Licence. Who Are We? RSE is a trusted clean water technology company, developing market leading products and solutions for purifying drinking water, recycling wastewater and cleaning water in industrial processes. We are disrupting the water sector, delivering water treatment products, technologies, and services to clients across the UK. RSE provides offsite modular build solutions using a low-carbon approach compared to traditional construction methods and our unique offering to the market focuses on innovation, efficiency, and excellence. Established in 1982, RSE has grown into one of the most prominent MEICA engineering businesses in the UK water industry. We have created a complete in-house and full-service capability from project inception through to design, fabrication, and delivery by means of installation and commissioning. We additionally have one of the largest servicing and maintenance teams in the market, to ensure we re on hand for all our clients needs. Our service offering presents industry-leading innovative solutions and our dedicated staff play a key role in delivering our sustainability and wider business goals. With over 2000 staff across our group of companies, our strategic ambition will see the business continue to grow as we expand our operations and diversify our products. One of RSE s key focuses is driving servant leadership and giving our people the opportunity and responsibility to take an entrepreneurial approach in their career development. What RSE Offer To build successful teams and drive the level of quality that RSE is renowned for, we know we need the best people in the industry. Not only do we require the relevant skillsets, but we also need people with the right attitude and mentality to thrive and grow in an innovative and fast-paced environment. At RSE, you ll be given every opportunity to set the path of your own career through our Business Streams and work within dynamic teams that will require you to rise to the challenge of working for a market leader. Industry-leading salary based on your experience. A flexible career development path, with no restrictions on where your career can go. Holiday Allowance of 31 days per year, rising to 33 days per year after 2 years service. Holiday Buy / Sell Scheme Company Pension Scheme Cycle to Work Discounted National Gym Membership Professional Fees Paid Employee Discount Platform EV/Hybrid Car Lease Scheme Access to our network of health professionals including mental health champions and Occupational Health Nurse. In a flourishing sector where there are vast career opportunities available, we believe by leading transformation in the industry our offering to the market means our people have the space to thrive. If you re interested in a career with a company that will harness your skills and provide you with the support to create your own future within the water industry, apply now.
WHAT IS IN IT FOR YOU? • Permanent role • Salary - £40k circa • Monday to Friday 9am-5:30pm • 23 days holiday plus standard bank holidays • Company Sickness after 12 months • Membership of the Company s pension scheme 5% contribution • Group life assurance THE BUSINESS We are seeking to recruit an Electrical Engineer for our client based in Northamptonshire. Our client has a long-distinguished history in the construction of landmark structures around the world, particularly iconic bridges and buildings. The organisations principal focus now is the design, manufacture and operation of specialist equipment and temporary works for the construction of bridges, buildings, offshore structures, refineries, power stations and industrial plants. They have particular expertise in the erection of long span suspension and cable stayed bridges and in the engineering for specialist modular construction including heavy lifting and skidding operations. THE ROLE • Design and develop: Electrical and control systems for heavy lifting equipment • Detailed electrical and control system specifications, including hardware and software selection • Electrical circuit diagrams and schematics • Install, commission, test, and operate equipment in both workshop and field settings • Ensure compliance: With relevant electrical design and safety standards, European directives, and legislation • Project Execution: Conduct feasibility studies for new equipment designs • Provide technical support to customers remotely and onsite • Documentation and Training: Maintain accurate records of all work performed • Develop and maintain technical literature accompanying equipment • Design and deliver training programs for customers on equipment use, service, and repair • Maintenance: Perform routine and corrective maintenance on equipment in the workshop THE PERSON • Bachelor's degree in Electrical Engineering or similar • Minimum 3 years of experience: Designing and building electrical systems • Strong understanding of electrical principles, codes, and standards • Excellent communication and problem-solving skills • Experience with 400V AC power circuits and 24V DC control circuits is essential • Technical Skills: Proficiency in electrical design software (e.g., AutoCAD Electrical, EPLAN) • Professional Qualities: Ability to work independently and as part of a team • Strong project management and organisational skills • Commitment to continuous learning and professional development • Travel Requirements: Valid passport and willingness to travel internationally at short notice • Driver s license Preferable: • Experience with Hydraulic systems • Ability to programme PLCs • Construction site experience • CSCS card TO APPLY Please send your updated CV to Harry Mann or apply direct by calling Westray Recruitment Group
Jun 13, 2026
Full time
WHAT IS IN IT FOR YOU? • Permanent role • Salary - £40k circa • Monday to Friday 9am-5:30pm • 23 days holiday plus standard bank holidays • Company Sickness after 12 months • Membership of the Company s pension scheme 5% contribution • Group life assurance THE BUSINESS We are seeking to recruit an Electrical Engineer for our client based in Northamptonshire. Our client has a long-distinguished history in the construction of landmark structures around the world, particularly iconic bridges and buildings. The organisations principal focus now is the design, manufacture and operation of specialist equipment and temporary works for the construction of bridges, buildings, offshore structures, refineries, power stations and industrial plants. They have particular expertise in the erection of long span suspension and cable stayed bridges and in the engineering for specialist modular construction including heavy lifting and skidding operations. THE ROLE • Design and develop: Electrical and control systems for heavy lifting equipment • Detailed electrical and control system specifications, including hardware and software selection • Electrical circuit diagrams and schematics • Install, commission, test, and operate equipment in both workshop and field settings • Ensure compliance: With relevant electrical design and safety standards, European directives, and legislation • Project Execution: Conduct feasibility studies for new equipment designs • Provide technical support to customers remotely and onsite • Documentation and Training: Maintain accurate records of all work performed • Develop and maintain technical literature accompanying equipment • Design and deliver training programs for customers on equipment use, service, and repair • Maintenance: Perform routine and corrective maintenance on equipment in the workshop THE PERSON • Bachelor's degree in Electrical Engineering or similar • Minimum 3 years of experience: Designing and building electrical systems • Strong understanding of electrical principles, codes, and standards • Excellent communication and problem-solving skills • Experience with 400V AC power circuits and 24V DC control circuits is essential • Technical Skills: Proficiency in electrical design software (e.g., AutoCAD Electrical, EPLAN) • Professional Qualities: Ability to work independently and as part of a team • Strong project management and organisational skills • Commitment to continuous learning and professional development • Travel Requirements: Valid passport and willingness to travel internationally at short notice • Driver s license Preferable: • Experience with Hydraulic systems • Ability to programme PLCs • Construction site experience • CSCS card TO APPLY Please send your updated CV to Harry Mann or apply direct by calling Westray Recruitment Group
Bennett and Game Recruitment LTD
Greenwich, London
Position: Cladding Designer (Mid to Senior level) Location: North Greenwich, London (hybrid) Salary: 42,000 to 48,000 (Mid level) / 50,000 to 60,000 (Senior level) A specialist facade contractor is expanding its design team and looking for a Mid or Senior Cladding Designer to join an established team of three. The business works across a broad range of facade packages including recladding, external wall insulation, brickwork, light steel framing, roofing and curtain walling, with projects primarily inside the M25 and some further afield. Design sits at the centre of how this business delivers. You will take projects from site survey and investigation through to construction detail, producing drawings that get built rather than filed. The work is varied, the team is close-knit, and your technical judgement will carry real weight from day one. The role is hybrid, combining a minimum of one day per week in the modern riverside office at North Greenwich, remote working, and at least one site visit per week depending on workload. Occasional overnight stays may be required. An immediate start is preferred. Cladding Designer Salary & Benefits Salary: 42,000 to 48,000 for Mid level, 50,000 to 58,000 for Senior level Annual salary reviews 20 days holiday plus Bank Holidays, with one additional day per year of service Company laptop and phone Paid travel expenses for site visits including mileage, train and parking Modern riverside office in North Greenwich, close to shops, restaurants and transport links Mentoring and career development support Quarterly office social events Clear progression pathway Cladding Designer Job Overview Produce cladding construction detail drawings across a range of systems and project types Prepare elevation, plan, fire barrier and site investigation drawings Develop accurate panel and sub-grid setting-out drawings from surveys and design information Carry out material take-offs and coordinate quantities and specifications with the commercial team Conduct site surveys, inspections and photographic records, translating findings into clear design information Attend design and progress meetings with clients, architects, engineers, Principal Designers and Building Control Liaise with suppliers to obtain specifications, confirmations, U-values and condensation risk calculations Coordinate with client representatives, structural engineers, consultants and site teams Maintain project documentation including drawing registers, RFIs and change logs Issue technical submissions and updated drawings to clients Take part in weekly internal design meetings and supplier CPD sessions Cladding Designer Requirements Degree in Civil or Mechanical Engineering, Construction or Architecture, or equivalent relevant experience Minimum 3 years UK cladding design experience for Mid level, 5 years or more for Senior level Proven experience specifically in cladding design; curtain walling and architectural metalwork experience is a plus Proficient in AutoCAD 2D, PDF software and Microsoft Office; 3D AutoCAD, SketchUp, Revit and Bluebeam are advantageous Good knowledge of cladding systems, panels, insulation, fixings, fire barriers and membranes Understanding of fire barrier design, fixing types, fabrication drawings, U-values and condensation risk analysis Able to produce accurate drawings from verbal, written or sketched instructions, site photos, surveys and mapping tools Comfortable managing 2 live projects at Mid level or 3 to 4 at Senior level Strong written and verbal English communication skills Full right to work in the UK and based within commutable distance of North Greenwich or the wider M25; driving licence preferred A PDF portfolio of sample cladding drawings from recent projects is essential; applications without a portfolio will not be considered What Makes This Opportunity Different? Join an established design team of three with immediate peer support and genuine room to influence how things are done Varied project exposure from remedial investigation work on existing buildings through to full external envelope schemes See your designs built, with regular site involvement rather than drawing in isolation A growing specialist that values its design function and is actively investing in it Clear progression with mentoring, annual reviews and a defined pathway to senior responsibility Bennett & Game Recruitment are acting as a Recruitment Agency in relation to this vacancy. Bennett and Game Recruitment are a multi-disciplined technical recruitment agency based in Chichester, West Sussex operating across the UK with specialist teams covering a range of industries. We are acting as a Recruitment Agency in relation to this vacancy, and in accordance with GDPR by applying you are granting us consent to process your data, contact you about the services we offer, and submit your CV for the role you have applied for.
Jun 13, 2026
Full time
Position: Cladding Designer (Mid to Senior level) Location: North Greenwich, London (hybrid) Salary: 42,000 to 48,000 (Mid level) / 50,000 to 60,000 (Senior level) A specialist facade contractor is expanding its design team and looking for a Mid or Senior Cladding Designer to join an established team of three. The business works across a broad range of facade packages including recladding, external wall insulation, brickwork, light steel framing, roofing and curtain walling, with projects primarily inside the M25 and some further afield. Design sits at the centre of how this business delivers. You will take projects from site survey and investigation through to construction detail, producing drawings that get built rather than filed. The work is varied, the team is close-knit, and your technical judgement will carry real weight from day one. The role is hybrid, combining a minimum of one day per week in the modern riverside office at North Greenwich, remote working, and at least one site visit per week depending on workload. Occasional overnight stays may be required. An immediate start is preferred. Cladding Designer Salary & Benefits Salary: 42,000 to 48,000 for Mid level, 50,000 to 58,000 for Senior level Annual salary reviews 20 days holiday plus Bank Holidays, with one additional day per year of service Company laptop and phone Paid travel expenses for site visits including mileage, train and parking Modern riverside office in North Greenwich, close to shops, restaurants and transport links Mentoring and career development support Quarterly office social events Clear progression pathway Cladding Designer Job Overview Produce cladding construction detail drawings across a range of systems and project types Prepare elevation, plan, fire barrier and site investigation drawings Develop accurate panel and sub-grid setting-out drawings from surveys and design information Carry out material take-offs and coordinate quantities and specifications with the commercial team Conduct site surveys, inspections and photographic records, translating findings into clear design information Attend design and progress meetings with clients, architects, engineers, Principal Designers and Building Control Liaise with suppliers to obtain specifications, confirmations, U-values and condensation risk calculations Coordinate with client representatives, structural engineers, consultants and site teams Maintain project documentation including drawing registers, RFIs and change logs Issue technical submissions and updated drawings to clients Take part in weekly internal design meetings and supplier CPD sessions Cladding Designer Requirements Degree in Civil or Mechanical Engineering, Construction or Architecture, or equivalent relevant experience Minimum 3 years UK cladding design experience for Mid level, 5 years or more for Senior level Proven experience specifically in cladding design; curtain walling and architectural metalwork experience is a plus Proficient in AutoCAD 2D, PDF software and Microsoft Office; 3D AutoCAD, SketchUp, Revit and Bluebeam are advantageous Good knowledge of cladding systems, panels, insulation, fixings, fire barriers and membranes Understanding of fire barrier design, fixing types, fabrication drawings, U-values and condensation risk analysis Able to produce accurate drawings from verbal, written or sketched instructions, site photos, surveys and mapping tools Comfortable managing 2 live projects at Mid level or 3 to 4 at Senior level Strong written and verbal English communication skills Full right to work in the UK and based within commutable distance of North Greenwich or the wider M25; driving licence preferred A PDF portfolio of sample cladding drawings from recent projects is essential; applications without a portfolio will not be considered What Makes This Opportunity Different? Join an established design team of three with immediate peer support and genuine room to influence how things are done Varied project exposure from remedial investigation work on existing buildings through to full external envelope schemes See your designs built, with regular site involvement rather than drawing in isolation A growing specialist that values its design function and is actively investing in it Clear progression with mentoring, annual reviews and a defined pathway to senior responsibility Bennett & Game Recruitment are acting as a Recruitment Agency in relation to this vacancy. Bennett and Game Recruitment are a multi-disciplined technical recruitment agency based in Chichester, West Sussex operating across the UK with specialist teams covering a range of industries. We are acting as a Recruitment Agency in relation to this vacancy, and in accordance with GDPR by applying you are granting us consent to process your data, contact you about the services we offer, and submit your CV for the role you have applied for.
Are you a motivated Salesforce Solutions Architect who is passionate about Cloud and application architecture? Do you have expert knowledge of Salesforce products and are you looking to get involved at the onset of a new platform and have the chance to really make an impact? Note: This role is based out in Livingston (2days/week in office) What you'll do: Partner with product owners and solutions architecture to deliver tailored solutions across the Salesforce Ecosystem to support and realise business requirements. (Sales, Service, Communications, Experience and Marketing Clouds) Drive adoption of best practices and support a community of Salesforce Technical Designers across a wide range of initiatives to support business growth, adoption and exploitation of the Salesforce platform. Employ robust Engineering principles and practices across the design, development and delivery of changes to the Salesforce platform, working across a number of Communities of Practice to foster a culture of continuous improvement, working to define and implement best practices across the Salesforce ecosystem. Perform technical analysis, design and support implementation of changes to Salesforce platform following best practices, leveraging OOTB capabilities and customisation when necessary. Contribute to improvement of DevOps processes, Ways of Working and tools including scrum, user support, platform security, quality, version control and CI/CD. Work with domain and cross-functional agile teams to support and enhance features in CPQ, EPC, CLM and OM to support Salesforce application offerings in iterative release cycles. Manage and train advise a team of Salesforce developers and architects to build solutions using Visualforce, Lightning, APEX, APIs, and Comms Cloud components - OmniScripts, Data Raptors, Omnistudio Cards, Omnistudio Product Designer, Omnistudio Pricing Designer and Integration Procedures. What you'll bring: Extensive and in-depth experience of the Salesforce Digital Commerce platform and business processes including Comms Cloud (Vlocity, CPQ, EPC, OM, CLM), Sales, Service, Experience and Marketing Clouds, ideally in a Communications environment. Experience in design and development across the Salesforce platform including OmniScripts, Data Raptors, Omnistudio (Cards, Product Designer, Pricing Designer), Digital Commerce (including Cart based APIs), Lightning Web Component Framework, Apex, Triggers, SOQL/SOSL, Flows, Integration Procedures, Orchestration Plans and Event Driven integrations with external systems using SOAP, REST, BULK, Platform events and Streaming APIs. Experience of Salesforce core and Comms Cloud performance considerations and knowledge/techniques to avoid performance degradation. Good knowledge of industry CPQ offerings such as Assetization, Product lifecycle management, Digital Commerce/Cart based APIs and external APIs. Experience in building complex, scalable and high-performance software systems, including object modelling and OO design patterns that have been successfully delivered to customers. Knowledge of TOGAF principals would be advantageous. Experience with Version Control Systems and Continuous Integration/Continuous Delivery CI/CD workflows (GitLab CI/CD, Jenkins) using Vlocity Build tool (CLI) or Vlocity IDX tool and SFDX. Knowledge of using SonarQube or other static code analysis tools and ELK or Splunk for log analysis would also be beneficial for this role. GCS is acting as an Employment Agency in relation to this vacancy.
Jun 13, 2026
Full time
Are you a motivated Salesforce Solutions Architect who is passionate about Cloud and application architecture? Do you have expert knowledge of Salesforce products and are you looking to get involved at the onset of a new platform and have the chance to really make an impact? Note: This role is based out in Livingston (2days/week in office) What you'll do: Partner with product owners and solutions architecture to deliver tailored solutions across the Salesforce Ecosystem to support and realise business requirements. (Sales, Service, Communications, Experience and Marketing Clouds) Drive adoption of best practices and support a community of Salesforce Technical Designers across a wide range of initiatives to support business growth, adoption and exploitation of the Salesforce platform. Employ robust Engineering principles and practices across the design, development and delivery of changes to the Salesforce platform, working across a number of Communities of Practice to foster a culture of continuous improvement, working to define and implement best practices across the Salesforce ecosystem. Perform technical analysis, design and support implementation of changes to Salesforce platform following best practices, leveraging OOTB capabilities and customisation when necessary. Contribute to improvement of DevOps processes, Ways of Working and tools including scrum, user support, platform security, quality, version control and CI/CD. Work with domain and cross-functional agile teams to support and enhance features in CPQ, EPC, CLM and OM to support Salesforce application offerings in iterative release cycles. Manage and train advise a team of Salesforce developers and architects to build solutions using Visualforce, Lightning, APEX, APIs, and Comms Cloud components - OmniScripts, Data Raptors, Omnistudio Cards, Omnistudio Product Designer, Omnistudio Pricing Designer and Integration Procedures. What you'll bring: Extensive and in-depth experience of the Salesforce Digital Commerce platform and business processes including Comms Cloud (Vlocity, CPQ, EPC, OM, CLM), Sales, Service, Experience and Marketing Clouds, ideally in a Communications environment. Experience in design and development across the Salesforce platform including OmniScripts, Data Raptors, Omnistudio (Cards, Product Designer, Pricing Designer), Digital Commerce (including Cart based APIs), Lightning Web Component Framework, Apex, Triggers, SOQL/SOSL, Flows, Integration Procedures, Orchestration Plans and Event Driven integrations with external systems using SOAP, REST, BULK, Platform events and Streaming APIs. Experience of Salesforce core and Comms Cloud performance considerations and knowledge/techniques to avoid performance degradation. Good knowledge of industry CPQ offerings such as Assetization, Product lifecycle management, Digital Commerce/Cart based APIs and external APIs. Experience in building complex, scalable and high-performance software systems, including object modelling and OO design patterns that have been successfully delivered to customers. Knowledge of TOGAF principals would be advantageous. Experience with Version Control Systems and Continuous Integration/Continuous Delivery CI/CD workflows (GitLab CI/CD, Jenkins) using Vlocity Build tool (CLI) or Vlocity IDX tool and SFDX. Knowledge of using SonarQube or other static code analysis tools and ELK or Splunk for log analysis would also be beneficial for this role. GCS is acting as an Employment Agency in relation to this vacancy.
Role: Senior Business Analyst (Cyber Resilience & Operational Transformation) Sector: Utilities / Critical National Infrastructure (CNI) Location: UK (Hybrid) Purpose of the Role Lead the business analysis, requirement elicitation, and governance frameworks for critical cyber resilience and operational transformation initiatives. This position bridges corporate technology and site-based industrial systems to translate complex cyber security, data protection, and business continuity expectations into executable, delivery-ready technical specifications. Key Responsibilities Cyber Security & Regulatory Alignment: Drive Cyber Assessment Framework (CAF) aligned activities, executing control mapping, evidence collation, gap analysis, and compilation of robust regulatory Evidence Packs (EP) to satisfy NIS compliance. Resilience & Disaster Recovery (DR): Elicit and define comprehensive end-to-end Business Continuity and Disaster Recovery (BCDR) requirements, focusing on ransomware resilience, data recovery governance, and secure operational restoration. IT/OT Integration Assurance: Collaborate with cross-functional architecture and engineering teams to govern system onboarding (e.g., SIEM/SOC infrastructure monitoring) across both corporate enterprise and industrial Operational Technology (OT/SCADA) environments. Requirements Governance: Create procurement-grade business analysis artifacts, including functional/non-functional specifications, process maps (BPMN), and strict Requirements Traceability Matrices (RTM). Requirements Extensive experience operating as a Senior, Lead, or Principal Business Analyst within a utility, regulated energy network, or CNI environment. Deep domain fluency in cybersecurity, industrial data protection frameworks, and complex disaster recovery structures. Proven exposure mapping technical systems to regulatory frameworks (such as NIS regulations or NCSC guidelines). Randstad Technologies is acting as an Employment Business in relation to this vacancy.
Jun 13, 2026
Contractor
Role: Senior Business Analyst (Cyber Resilience & Operational Transformation) Sector: Utilities / Critical National Infrastructure (CNI) Location: UK (Hybrid) Purpose of the Role Lead the business analysis, requirement elicitation, and governance frameworks for critical cyber resilience and operational transformation initiatives. This position bridges corporate technology and site-based industrial systems to translate complex cyber security, data protection, and business continuity expectations into executable, delivery-ready technical specifications. Key Responsibilities Cyber Security & Regulatory Alignment: Drive Cyber Assessment Framework (CAF) aligned activities, executing control mapping, evidence collation, gap analysis, and compilation of robust regulatory Evidence Packs (EP) to satisfy NIS compliance. Resilience & Disaster Recovery (DR): Elicit and define comprehensive end-to-end Business Continuity and Disaster Recovery (BCDR) requirements, focusing on ransomware resilience, data recovery governance, and secure operational restoration. IT/OT Integration Assurance: Collaborate with cross-functional architecture and engineering teams to govern system onboarding (e.g., SIEM/SOC infrastructure monitoring) across both corporate enterprise and industrial Operational Technology (OT/SCADA) environments. Requirements Governance: Create procurement-grade business analysis artifacts, including functional/non-functional specifications, process maps (BPMN), and strict Requirements Traceability Matrices (RTM). Requirements Extensive experience operating as a Senior, Lead, or Principal Business Analyst within a utility, regulated energy network, or CNI environment. Deep domain fluency in cybersecurity, industrial data protection frameworks, and complex disaster recovery structures. Proven exposure mapping technical systems to regulatory frameworks (such as NIS regulations or NCSC guidelines). Randstad Technologies is acting as an Employment Business in relation to this vacancy.
Principal Systems Engineer Modelling & Simulation Motorsport & High-Performance Vehicles We are working with a leading engineering organisation at the forefront of motorsport and high-performance vehicle technology to appoint a Principal Systems Engineer Modelling & Simulation. This role sits at the highest level of technical contribution (equivalent to Staff Engineer level globally). It offers the opportunity to define modelling strategy, lead complex system development, and directly influence next-generation electrohydraulic technologies. The Opportunity This is a senior, hands-on technical leadership role focused on model-based design, simulation capability, and system performance. You ll work across the full lifecycle from concept development and requirements definition through to integration, validation, and customer delivery. You will play a key role in both new product development and strategic growth initiatives, acting as a technical authority internally and with customers. Key Responsibilities Lead the development and deployment of advanced modelling and simulation tools, supporting system design, customer prototyping, and strategic growth initiatives Own and evolve simulation capability, maintaining, updating, and validating modelling tools to ensure accuracy and scalability Conduct detailed performance analysis using MATLAB/Simulink, driving engineering decisions through model-based insights Develop simulation and sizing tools to support system architecture and component selection Act as a technical lead in customer engagements, leveraging model-based design to define and deliver engineering solutions Translate customer requirements into robust engineering specifications through: Functional analysis Trade studies Requirements allocation and interface definition Lead system and subsystem integration and testing, including anomaly investigation and root cause analysis Define and drive Verification & Validation (V&V) strategies across product and system development Conduct failure analysis, implementing effective corrective actions to improve reliability and performance What We re Looking For Strong expertise in hydraulic systems and classical control theory Advanced capability in MATLAB/Simulink, including performance modelling and analysis Proven experience developing simulation and/or sizing tools Demonstrated ability to build and deploy model-based engineering environments Experience leading system integration, V&V, and customer-facing technical activities Background & Experience Degree in Electrical, Mechanical, Aerospace, or Systems Engineering (Master s preferred) 10+ years experience in a progressive engineering environment Proven experience in technical leadership and cross-functional engineering delivery Working knowledge of CFD, FEA, or magnetic analysis is advantageous Familiarity with servovalve design is beneficial Why This Role? Influence cutting-edge motorsport and high-performance vehicle technologies Own and shape the modelling and simulation strategy Work at a level of true technical authority without moving into management Combine deep technical work with customer impact and innovation
Jun 13, 2026
Full time
Principal Systems Engineer Modelling & Simulation Motorsport & High-Performance Vehicles We are working with a leading engineering organisation at the forefront of motorsport and high-performance vehicle technology to appoint a Principal Systems Engineer Modelling & Simulation. This role sits at the highest level of technical contribution (equivalent to Staff Engineer level globally). It offers the opportunity to define modelling strategy, lead complex system development, and directly influence next-generation electrohydraulic technologies. The Opportunity This is a senior, hands-on technical leadership role focused on model-based design, simulation capability, and system performance. You ll work across the full lifecycle from concept development and requirements definition through to integration, validation, and customer delivery. You will play a key role in both new product development and strategic growth initiatives, acting as a technical authority internally and with customers. Key Responsibilities Lead the development and deployment of advanced modelling and simulation tools, supporting system design, customer prototyping, and strategic growth initiatives Own and evolve simulation capability, maintaining, updating, and validating modelling tools to ensure accuracy and scalability Conduct detailed performance analysis using MATLAB/Simulink, driving engineering decisions through model-based insights Develop simulation and sizing tools to support system architecture and component selection Act as a technical lead in customer engagements, leveraging model-based design to define and deliver engineering solutions Translate customer requirements into robust engineering specifications through: Functional analysis Trade studies Requirements allocation and interface definition Lead system and subsystem integration and testing, including anomaly investigation and root cause analysis Define and drive Verification & Validation (V&V) strategies across product and system development Conduct failure analysis, implementing effective corrective actions to improve reliability and performance What We re Looking For Strong expertise in hydraulic systems and classical control theory Advanced capability in MATLAB/Simulink, including performance modelling and analysis Proven experience developing simulation and/or sizing tools Demonstrated ability to build and deploy model-based engineering environments Experience leading system integration, V&V, and customer-facing technical activities Background & Experience Degree in Electrical, Mechanical, Aerospace, or Systems Engineering (Master s preferred) 10+ years experience in a progressive engineering environment Proven experience in technical leadership and cross-functional engineering delivery Working knowledge of CFD, FEA, or magnetic analysis is advantageous Familiarity with servovalve design is beneficial Why This Role? Influence cutting-edge motorsport and high-performance vehicle technologies Own and shape the modelling and simulation strategy Work at a level of true technical authority without moving into management Combine deep technical work with customer impact and innovation
Job Title: Principal Structural Engineer Location: Barrow-in-Furness We offer a range of hybrid and flexible working arrangements - please speak to your recruiter about the options for this particular role Salary: Competitive Who we are: Join BAE Systems and you'll be part of something bigger. As a valued member of our global colleague network, you'll bring your unique skills and perspectives to help pioneer progress and protect what matters most. You'll be trusted to play your part in delivering the advanced, technology-led defence, aerospace and security solutions of tomorrow, shaping a safer future, for all of us. From the depths of the ocean, to the far reaches of space, there's no limit to where a career at BAE Systems could take you. Job Description: As a Principal Structural engineer, you will design and analyse complex steel structures using Eurocodes, British Standards and BAE standards whilst applying your expertise in regulations including LOLER, Codes of Compliance, Weld Specifications and Geometric Tolerance. You will interpret data from analytical techniques, support manufacturing, assembly, lifting, handling and the overall installation of submarine structures. Core duties: You will be responsible for the design and analysis of complex steel structures utilising Eurocodes, British Standards and BAE standards You will apply your expertise in regulations and requirements that extend beyond those used within BAE Systems, including LOLER, Codes of Compliance, Weld Specifications, and Geometric Tolerance You will be responsible for interpreting data within a wide range of computer based analytical techniques You will be supporting the manufacturing, assembly, lifting, handling and installation processes of Submarine Structures You will be supporting with the production of concept drawings, layouts and other technical outputs You will be responsible for checking and approving calculations Essential Skills: You will need to hold an Engineering Degree BEng/MEng or have the equivalent experience You are required to have gained Civil / Manufacturing / Structural Based and Chartered Engineer CEng status or Incorporated IEng status nearing CEng status You will need a good expertise within structural steel analysis and design You will be required to be fully conversant in the use of Eurocodes and British Standards You will need to be proficient with the reviewing and checking of design outputs You will need to be experienced in mechanical engineering and/or structural steelwork with knowledge of lifting handling and LOLER The Production Engineering Department team: By joining us in the team, you will work with our designers and engineers to conduct engineering assessments that support the build process, contribute to equipment development and provide operational and production support for safety critical systems within a rapidly growing programme. Relocation support packages are available for all roles, subject to eligibility criteria. Why BAE Systems? Here you'll build a career with purpose and limitless possibilities. With lifelong learning and meaningful work, this is a place where you can grow your career with confidence and be empowered to be your best. You'll be recognised for your contribution and enjoy rewards tailored to what's most important to you and your family, support for your financial and personal wellbeing, as well as a balanced lifestyle. In an environment embracing sustainable ways of working and with a strong sense of shared purpose, our supportive culture is a place you can feel you belong and proud of the difference you make. A place where everyone can thrive: We're committed to building an inclusive workplace where everyone feels valued and supported. We know that a diversity of backgrounds, perspectives and experiences strengthens our teams and is vital to the work we do. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date: 16th June 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible.
Jun 13, 2026
Full time
Job Title: Principal Structural Engineer Location: Barrow-in-Furness We offer a range of hybrid and flexible working arrangements - please speak to your recruiter about the options for this particular role Salary: Competitive Who we are: Join BAE Systems and you'll be part of something bigger. As a valued member of our global colleague network, you'll bring your unique skills and perspectives to help pioneer progress and protect what matters most. You'll be trusted to play your part in delivering the advanced, technology-led defence, aerospace and security solutions of tomorrow, shaping a safer future, for all of us. From the depths of the ocean, to the far reaches of space, there's no limit to where a career at BAE Systems could take you. Job Description: As a Principal Structural engineer, you will design and analyse complex steel structures using Eurocodes, British Standards and BAE standards whilst applying your expertise in regulations including LOLER, Codes of Compliance, Weld Specifications and Geometric Tolerance. You will interpret data from analytical techniques, support manufacturing, assembly, lifting, handling and the overall installation of submarine structures. Core duties: You will be responsible for the design and analysis of complex steel structures utilising Eurocodes, British Standards and BAE standards You will apply your expertise in regulations and requirements that extend beyond those used within BAE Systems, including LOLER, Codes of Compliance, Weld Specifications, and Geometric Tolerance You will be responsible for interpreting data within a wide range of computer based analytical techniques You will be supporting the manufacturing, assembly, lifting, handling and installation processes of Submarine Structures You will be supporting with the production of concept drawings, layouts and other technical outputs You will be responsible for checking and approving calculations Essential Skills: You will need to hold an Engineering Degree BEng/MEng or have the equivalent experience You are required to have gained Civil / Manufacturing / Structural Based and Chartered Engineer CEng status or Incorporated IEng status nearing CEng status You will need a good expertise within structural steel analysis and design You will be required to be fully conversant in the use of Eurocodes and British Standards You will need to be proficient with the reviewing and checking of design outputs You will need to be experienced in mechanical engineering and/or structural steelwork with knowledge of lifting handling and LOLER The Production Engineering Department team: By joining us in the team, you will work with our designers and engineers to conduct engineering assessments that support the build process, contribute to equipment development and provide operational and production support for safety critical systems within a rapidly growing programme. Relocation support packages are available for all roles, subject to eligibility criteria. Why BAE Systems? Here you'll build a career with purpose and limitless possibilities. With lifelong learning and meaningful work, this is a place where you can grow your career with confidence and be empowered to be your best. You'll be recognised for your contribution and enjoy rewards tailored to what's most important to you and your family, support for your financial and personal wellbeing, as well as a balanced lifestyle. In an environment embracing sustainable ways of working and with a strong sense of shared purpose, our supportive culture is a place you can feel you belong and proud of the difference you make. A place where everyone can thrive: We're committed to building an inclusive workplace where everyone feels valued and supported. We know that a diversity of backgrounds, perspectives and experiences strengthens our teams and is vital to the work we do. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date: 16th June 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible.
Job Title: Principal Structural Engineer Location: Barrow-in-Furness We offer a range of hybrid and flexible working arrangements - please speak to your recruiter about the options for this particular role Salary: Competitive Who we are: Join BAE Systems and you'll be part of something bigger. As a valued member of our global colleague network, you'll bring your unique skills and perspectives to help pioneer progress and protect what matters most. You'll be trusted to play your part in delivering the advanced, technology-led defence, aerospace and security solutions of tomorrow, shaping a safer future, for all of us. From the depths of the ocean, to the far reaches of space, there's no limit to where a career at BAE Systems could take you. Job Description: As a Principal Structural engineer, you will design and analyse complex steel structures using Eurocodes, British Standards and BAE standards whilst applying your expertise in regulations including LOLER, Codes of Compliance, Weld Specifications and Geometric Tolerance. You will interpret data from analytical techniques, support manufacturing, assembly, lifting, handling and the overall installation of submarine structures. Core duties: You will be responsible for the design and analysis of complex steel structures utilising Eurocodes, British Standards and BAE standards You will apply your expertise in regulations and requirements that extend beyond those used within BAE Systems, including LOLER, Codes of Compliance, Weld Specifications, and Geometric Tolerance You will be responsible for interpreting data within a wide range of computer based analytical techniques You will be supporting the manufacturing, assembly, lifting, handling and installation processes of Submarine Structures You will be supporting with the production of concept drawings, layouts and other technical outputs You will be responsible for checking and approving calculations Essential Skills: You will need to hold an Engineering Degree BEng/MEng or have the equivalent experience You are required to have gained Civil / Manufacturing / Structural Based and Chartered Engineer CEng status or Incorporated IEng status nearing CEng status You will need a good expertise within structural steel analysis and design You will be required to be fully conversant in the use of Eurocodes and British Standards You will need to be proficient with the reviewing and checking of design outputs You will need to be experienced in mechanical engineering and/or structural steelwork with knowledge of lifting handling and LOLER The Production Engineering Department team: By joining us in the team, you will work with our designers and engineers to conduct engineering assessments that support the build process, contribute to equipment development and provide operational and production support for safety critical systems within a rapidly growing programme. Relocation support packages are available for all roles, subject to eligibility criteria. Why BAE Systems? Here you'll build a career with purpose and limitless possibilities. With lifelong learning and meaningful work, this is a place where you can grow your career with confidence and be empowered to be your best. You'll be recognised for your contribution and enjoy rewards tailored to what's most important to you and your family, support for your financial and personal wellbeing, as well as a balanced lifestyle. In an environment embracing sustainable ways of working and with a strong sense of shared purpose, our supportive culture is a place you can feel you belong and proud of the difference you make. A place where everyone can thrive: We're committed to building an inclusive workplace where everyone feels valued and supported. We know that a diversity of backgrounds, perspectives and experiences strengthens our teams and is vital to the work we do. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date: 16th June 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible.
Jun 13, 2026
Full time
Job Title: Principal Structural Engineer Location: Barrow-in-Furness We offer a range of hybrid and flexible working arrangements - please speak to your recruiter about the options for this particular role Salary: Competitive Who we are: Join BAE Systems and you'll be part of something bigger. As a valued member of our global colleague network, you'll bring your unique skills and perspectives to help pioneer progress and protect what matters most. You'll be trusted to play your part in delivering the advanced, technology-led defence, aerospace and security solutions of tomorrow, shaping a safer future, for all of us. From the depths of the ocean, to the far reaches of space, there's no limit to where a career at BAE Systems could take you. Job Description: As a Principal Structural engineer, you will design and analyse complex steel structures using Eurocodes, British Standards and BAE standards whilst applying your expertise in regulations including LOLER, Codes of Compliance, Weld Specifications and Geometric Tolerance. You will interpret data from analytical techniques, support manufacturing, assembly, lifting, handling and the overall installation of submarine structures. Core duties: You will be responsible for the design and analysis of complex steel structures utilising Eurocodes, British Standards and BAE standards You will apply your expertise in regulations and requirements that extend beyond those used within BAE Systems, including LOLER, Codes of Compliance, Weld Specifications, and Geometric Tolerance You will be responsible for interpreting data within a wide range of computer based analytical techniques You will be supporting the manufacturing, assembly, lifting, handling and installation processes of Submarine Structures You will be supporting with the production of concept drawings, layouts and other technical outputs You will be responsible for checking and approving calculations Essential Skills: You will need to hold an Engineering Degree BEng/MEng or have the equivalent experience You are required to have gained Civil / Manufacturing / Structural Based and Chartered Engineer CEng status or Incorporated IEng status nearing CEng status You will need a good expertise within structural steel analysis and design You will be required to be fully conversant in the use of Eurocodes and British Standards You will need to be proficient with the reviewing and checking of design outputs You will need to be experienced in mechanical engineering and/or structural steelwork with knowledge of lifting handling and LOLER The Production Engineering Department team: By joining us in the team, you will work with our designers and engineers to conduct engineering assessments that support the build process, contribute to equipment development and provide operational and production support for safety critical systems within a rapidly growing programme. Relocation support packages are available for all roles, subject to eligibility criteria. Why BAE Systems? Here you'll build a career with purpose and limitless possibilities. With lifelong learning and meaningful work, this is a place where you can grow your career with confidence and be empowered to be your best. You'll be recognised for your contribution and enjoy rewards tailored to what's most important to you and your family, support for your financial and personal wellbeing, as well as a balanced lifestyle. In an environment embracing sustainable ways of working and with a strong sense of shared purpose, our supportive culture is a place you can feel you belong and proud of the difference you make. A place where everyone can thrive: We're committed to building an inclusive workplace where everyone feels valued and supported. We know that a diversity of backgrounds, perspectives and experiences strengthens our teams and is vital to the work we do. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date: 16th June 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible.
Job Title: Principal Structural Engineer Location: Barrow-in-Furness We offer a range of hybrid and flexible working arrangements - please speak to your recruiter about the options for this particular role Salary: Competitive Who we are: Join BAE Systems and you'll be part of something bigger. As a valued member of our global colleague network, you'll bring your unique skills and perspectives to help pioneer progress and protect what matters most. You'll be trusted to play your part in delivering the advanced, technology-led defence, aerospace and security solutions of tomorrow, shaping a safer future, for all of us. From the depths of the ocean, to the far reaches of space, there's no limit to where a career at BAE Systems could take you. Job Description: As a Principal Structural engineer, you will design and analyse complex steel structures using Eurocodes, British Standards and BAE standards whilst applying your expertise in regulations including LOLER, Codes of Compliance, Weld Specifications and Geometric Tolerance. You will interpret data from analytical techniques, support manufacturing, assembly, lifting, handling and the overall installation of submarine structures. Core duties: You will be responsible for the design and analysis of complex steel structures utilising Eurocodes, British Standards and BAE standards You will apply your expertise in regulations and requirements that extend beyond those used within BAE Systems, including LOLER, Codes of Compliance, Weld Specifications, and Geometric Tolerance You will be responsible for interpreting data within a wide range of computer based analytical techniques You will be supporting the manufacturing, assembly, lifting, handling and installation processes of Submarine Structures You will be supporting with the production of concept drawings, layouts and other technical outputs You will be responsible for checking and approving calculations Essential Skills: You will need to hold an Engineering Degree BEng/MEng or have the equivalent experience You are required to have gained Civil / Manufacturing / Structural Based and Chartered Engineer CEng status or Incorporated IEng status nearing CEng status You will need a good expertise within structural steel analysis and design You will be required to be fully conversant in the use of Eurocodes and British Standards You will need to be proficient with the reviewing and checking of design outputs You will need to be experienced in mechanical engineering and/or structural steelwork with knowledge of lifting handling and LOLER The Production Engineering Department team: By joining us in the team, you will work with our designers and engineers to conduct engineering assessments that support the build process, contribute to equipment development and provide operational and production support for safety critical systems within a rapidly growing programme. Relocation support packages are available for all roles, subject to eligibility criteria. Why BAE Systems? Here you'll build a career with purpose and limitless possibilities. With lifelong learning and meaningful work, this is a place where you can grow your career with confidence and be empowered to be your best. You'll be recognised for your contribution and enjoy rewards tailored to what's most important to you and your family, support for your financial and personal wellbeing, as well as a balanced lifestyle. In an environment embracing sustainable ways of working and with a strong sense of shared purpose, our supportive culture is a place you can feel you belong and proud of the difference you make. A place where everyone can thrive: We're committed to building an inclusive workplace where everyone feels valued and supported. We know that a diversity of backgrounds, perspectives and experiences strengthens our teams and is vital to the work we do. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date: 16th June 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible.
Jun 13, 2026
Full time
Job Title: Principal Structural Engineer Location: Barrow-in-Furness We offer a range of hybrid and flexible working arrangements - please speak to your recruiter about the options for this particular role Salary: Competitive Who we are: Join BAE Systems and you'll be part of something bigger. As a valued member of our global colleague network, you'll bring your unique skills and perspectives to help pioneer progress and protect what matters most. You'll be trusted to play your part in delivering the advanced, technology-led defence, aerospace and security solutions of tomorrow, shaping a safer future, for all of us. From the depths of the ocean, to the far reaches of space, there's no limit to where a career at BAE Systems could take you. Job Description: As a Principal Structural engineer, you will design and analyse complex steel structures using Eurocodes, British Standards and BAE standards whilst applying your expertise in regulations including LOLER, Codes of Compliance, Weld Specifications and Geometric Tolerance. You will interpret data from analytical techniques, support manufacturing, assembly, lifting, handling and the overall installation of submarine structures. Core duties: You will be responsible for the design and analysis of complex steel structures utilising Eurocodes, British Standards and BAE standards You will apply your expertise in regulations and requirements that extend beyond those used within BAE Systems, including LOLER, Codes of Compliance, Weld Specifications, and Geometric Tolerance You will be responsible for interpreting data within a wide range of computer based analytical techniques You will be supporting the manufacturing, assembly, lifting, handling and installation processes of Submarine Structures You will be supporting with the production of concept drawings, layouts and other technical outputs You will be responsible for checking and approving calculations Essential Skills: You will need to hold an Engineering Degree BEng/MEng or have the equivalent experience You are required to have gained Civil / Manufacturing / Structural Based and Chartered Engineer CEng status or Incorporated IEng status nearing CEng status You will need a good expertise within structural steel analysis and design You will be required to be fully conversant in the use of Eurocodes and British Standards You will need to be proficient with the reviewing and checking of design outputs You will need to be experienced in mechanical engineering and/or structural steelwork with knowledge of lifting handling and LOLER The Production Engineering Department team: By joining us in the team, you will work with our designers and engineers to conduct engineering assessments that support the build process, contribute to equipment development and provide operational and production support for safety critical systems within a rapidly growing programme. Relocation support packages are available for all roles, subject to eligibility criteria. Why BAE Systems? Here you'll build a career with purpose and limitless possibilities. With lifelong learning and meaningful work, this is a place where you can grow your career with confidence and be empowered to be your best. You'll be recognised for your contribution and enjoy rewards tailored to what's most important to you and your family, support for your financial and personal wellbeing, as well as a balanced lifestyle. In an environment embracing sustainable ways of working and with a strong sense of shared purpose, our supportive culture is a place you can feel you belong and proud of the difference you make. A place where everyone can thrive: We're committed to building an inclusive workplace where everyone feels valued and supported. We know that a diversity of backgrounds, perspectives and experiences strengthens our teams and is vital to the work we do. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date: 16th June 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible.
Job Title: Principal Structural Engineer Location: Barrow-in-Furness We offer a range of hybrid and flexible working arrangements - please speak to your recruiter about the options for this particular role Salary: Competitive Who we are: Join BAE Systems and you'll be part of something bigger. As a valued member of our global colleague network, you'll bring your unique skills and perspectives to help pioneer progress and protect what matters most. You'll be trusted to play your part in delivering the advanced, technology-led defence, aerospace and security solutions of tomorrow, shaping a safer future, for all of us. From the depths of the ocean, to the far reaches of space, there's no limit to where a career at BAE Systems could take you. Job Description: As a Principal Structural engineer, you will design and analyse complex steel structures using Eurocodes, British Standards and BAE standards whilst applying your expertise in regulations including LOLER, Codes of Compliance, Weld Specifications and Geometric Tolerance. You will interpret data from analytical techniques, support manufacturing, assembly, lifting, handling and the overall installation of submarine structures. Core duties: You will be responsible for the design and analysis of complex steel structures utilising Eurocodes, British Standards and BAE standards You will apply your expertise in regulations and requirements that extend beyond those used within BAE Systems, including LOLER, Codes of Compliance, Weld Specifications, and Geometric Tolerance You will be responsible for interpreting data within a wide range of computer based analytical techniques You will be supporting the manufacturing, assembly, lifting, handling and installation processes of Submarine Structures You will be supporting with the production of concept drawings, layouts and other technical outputs You will be responsible for checking and approving calculations Essential Skills: You will need to hold an Engineering Degree BEng/MEng or have the equivalent experience You are required to have gained Civil / Manufacturing / Structural Based and Chartered Engineer CEng status or Incorporated IEng status nearing CEng status You will need a good expertise within structural steel analysis and design You will be required to be fully conversant in the use of Eurocodes and British Standards You will need to be proficient with the reviewing and checking of design outputs You will need to be experienced in mechanical engineering and/or structural steelwork with knowledge of lifting handling and LOLER The Production Engineering Department team: By joining us in the team, you will work with our designers and engineers to conduct engineering assessments that support the build process, contribute to equipment development and provide operational and production support for safety critical systems within a rapidly growing programme. Relocation support packages are available for all roles, subject to eligibility criteria. Why BAE Systems? Here you'll build a career with purpose and limitless possibilities. With lifelong learning and meaningful work, this is a place where you can grow your career with confidence and be empowered to be your best. You'll be recognised for your contribution and enjoy rewards tailored to what's most important to you and your family, support for your financial and personal wellbeing, as well as a balanced lifestyle. In an environment embracing sustainable ways of working and with a strong sense of shared purpose, our supportive culture is a place you can feel you belong and proud of the difference you make. A place where everyone can thrive: We're committed to building an inclusive workplace where everyone feels valued and supported. We know that a diversity of backgrounds, perspectives and experiences strengthens our teams and is vital to the work we do. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date: 16th June 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible.
Jun 13, 2026
Full time
Job Title: Principal Structural Engineer Location: Barrow-in-Furness We offer a range of hybrid and flexible working arrangements - please speak to your recruiter about the options for this particular role Salary: Competitive Who we are: Join BAE Systems and you'll be part of something bigger. As a valued member of our global colleague network, you'll bring your unique skills and perspectives to help pioneer progress and protect what matters most. You'll be trusted to play your part in delivering the advanced, technology-led defence, aerospace and security solutions of tomorrow, shaping a safer future, for all of us. From the depths of the ocean, to the far reaches of space, there's no limit to where a career at BAE Systems could take you. Job Description: As a Principal Structural engineer, you will design and analyse complex steel structures using Eurocodes, British Standards and BAE standards whilst applying your expertise in regulations including LOLER, Codes of Compliance, Weld Specifications and Geometric Tolerance. You will interpret data from analytical techniques, support manufacturing, assembly, lifting, handling and the overall installation of submarine structures. Core duties: You will be responsible for the design and analysis of complex steel structures utilising Eurocodes, British Standards and BAE standards You will apply your expertise in regulations and requirements that extend beyond those used within BAE Systems, including LOLER, Codes of Compliance, Weld Specifications, and Geometric Tolerance You will be responsible for interpreting data within a wide range of computer based analytical techniques You will be supporting the manufacturing, assembly, lifting, handling and installation processes of Submarine Structures You will be supporting with the production of concept drawings, layouts and other technical outputs You will be responsible for checking and approving calculations Essential Skills: You will need to hold an Engineering Degree BEng/MEng or have the equivalent experience You are required to have gained Civil / Manufacturing / Structural Based and Chartered Engineer CEng status or Incorporated IEng status nearing CEng status You will need a good expertise within structural steel analysis and design You will be required to be fully conversant in the use of Eurocodes and British Standards You will need to be proficient with the reviewing and checking of design outputs You will need to be experienced in mechanical engineering and/or structural steelwork with knowledge of lifting handling and LOLER The Production Engineering Department team: By joining us in the team, you will work with our designers and engineers to conduct engineering assessments that support the build process, contribute to equipment development and provide operational and production support for safety critical systems within a rapidly growing programme. Relocation support packages are available for all roles, subject to eligibility criteria. Why BAE Systems? Here you'll build a career with purpose and limitless possibilities. With lifelong learning and meaningful work, this is a place where you can grow your career with confidence and be empowered to be your best. You'll be recognised for your contribution and enjoy rewards tailored to what's most important to you and your family, support for your financial and personal wellbeing, as well as a balanced lifestyle. In an environment embracing sustainable ways of working and with a strong sense of shared purpose, our supportive culture is a place you can feel you belong and proud of the difference you make. A place where everyone can thrive: We're committed to building an inclusive workplace where everyone feels valued and supported. We know that a diversity of backgrounds, perspectives and experiences strengthens our teams and is vital to the work we do. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date: 16th June 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible.
Job Title: Principal Structural Engineer Location: Barrow-in-Furness We offer a range of hybrid and flexible working arrangements - please speak to your recruiter about the options for this particular role Salary: Competitive Who we are: Join BAE Systems and you'll be part of something bigger. As a valued member of our global colleague network, you'll bring your unique skills and perspectives to help pioneer progress and protect what matters most. You'll be trusted to play your part in delivering the advanced, technology-led defence, aerospace and security solutions of tomorrow, shaping a safer future, for all of us. From the depths of the ocean, to the far reaches of space, there's no limit to where a career at BAE Systems could take you. Job Description: As a Principal Structural engineer, you will design and analyse complex steel structures using Eurocodes, British Standards and BAE standards whilst applying your expertise in regulations including LOLER, Codes of Compliance, Weld Specifications and Geometric Tolerance. You will interpret data from analytical techniques, support manufacturing, assembly, lifting, handling and the overall installation of submarine structures. Core duties: You will be responsible for the design and analysis of complex steel structures utilising Eurocodes, British Standards and BAE standards You will apply your expertise in regulations and requirements that extend beyond those used within BAE Systems, including LOLER, Codes of Compliance, Weld Specifications, and Geometric Tolerance You will be responsible for interpreting data within a wide range of computer based analytical techniques You will be supporting the manufacturing, assembly, lifting, handling and installation processes of Submarine Structures You will be supporting with the production of concept drawings, layouts and other technical outputs You will be responsible for checking and approving calculations Essential Skills: You will need to hold an Engineering Degree BEng/MEng or have the equivalent experience You are required to have gained Civil / Manufacturing / Structural Based and Chartered Engineer CEng status or Incorporated IEng status nearing CEng status You will need a good expertise within structural steel analysis and design You will be required to be fully conversant in the use of Eurocodes and British Standards You will need to be proficient with the reviewing and checking of design outputs You will need to be experienced in mechanical engineering and/or structural steelwork with knowledge of lifting handling and LOLER The Production Engineering Department team: By joining us in the team, you will work with our designers and engineers to conduct engineering assessments that support the build process, contribute to equipment development and provide operational and production support for safety critical systems within a rapidly growing programme. Relocation support packages are available for all roles, subject to eligibility criteria. Why BAE Systems? Here you'll build a career with purpose and limitless possibilities. With lifelong learning and meaningful work, this is a place where you can grow your career with confidence and be empowered to be your best. You'll be recognised for your contribution and enjoy rewards tailored to what's most important to you and your family, support for your financial and personal wellbeing, as well as a balanced lifestyle. In an environment embracing sustainable ways of working and with a strong sense of shared purpose, our supportive culture is a place you can feel you belong and proud of the difference you make. A place where everyone can thrive: We're committed to building an inclusive workplace where everyone feels valued and supported. We know that a diversity of backgrounds, perspectives and experiences strengthens our teams and is vital to the work we do. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date: 16th June 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible.
Jun 13, 2026
Full time
Job Title: Principal Structural Engineer Location: Barrow-in-Furness We offer a range of hybrid and flexible working arrangements - please speak to your recruiter about the options for this particular role Salary: Competitive Who we are: Join BAE Systems and you'll be part of something bigger. As a valued member of our global colleague network, you'll bring your unique skills and perspectives to help pioneer progress and protect what matters most. You'll be trusted to play your part in delivering the advanced, technology-led defence, aerospace and security solutions of tomorrow, shaping a safer future, for all of us. From the depths of the ocean, to the far reaches of space, there's no limit to where a career at BAE Systems could take you. Job Description: As a Principal Structural engineer, you will design and analyse complex steel structures using Eurocodes, British Standards and BAE standards whilst applying your expertise in regulations including LOLER, Codes of Compliance, Weld Specifications and Geometric Tolerance. You will interpret data from analytical techniques, support manufacturing, assembly, lifting, handling and the overall installation of submarine structures. Core duties: You will be responsible for the design and analysis of complex steel structures utilising Eurocodes, British Standards and BAE standards You will apply your expertise in regulations and requirements that extend beyond those used within BAE Systems, including LOLER, Codes of Compliance, Weld Specifications, and Geometric Tolerance You will be responsible for interpreting data within a wide range of computer based analytical techniques You will be supporting the manufacturing, assembly, lifting, handling and installation processes of Submarine Structures You will be supporting with the production of concept drawings, layouts and other technical outputs You will be responsible for checking and approving calculations Essential Skills: You will need to hold an Engineering Degree BEng/MEng or have the equivalent experience You are required to have gained Civil / Manufacturing / Structural Based and Chartered Engineer CEng status or Incorporated IEng status nearing CEng status You will need a good expertise within structural steel analysis and design You will be required to be fully conversant in the use of Eurocodes and British Standards You will need to be proficient with the reviewing and checking of design outputs You will need to be experienced in mechanical engineering and/or structural steelwork with knowledge of lifting handling and LOLER The Production Engineering Department team: By joining us in the team, you will work with our designers and engineers to conduct engineering assessments that support the build process, contribute to equipment development and provide operational and production support for safety critical systems within a rapidly growing programme. Relocation support packages are available for all roles, subject to eligibility criteria. Why BAE Systems? Here you'll build a career with purpose and limitless possibilities. With lifelong learning and meaningful work, this is a place where you can grow your career with confidence and be empowered to be your best. You'll be recognised for your contribution and enjoy rewards tailored to what's most important to you and your family, support for your financial and personal wellbeing, as well as a balanced lifestyle. In an environment embracing sustainable ways of working and with a strong sense of shared purpose, our supportive culture is a place you can feel you belong and proud of the difference you make. A place where everyone can thrive: We're committed to building an inclusive workplace where everyone feels valued and supported. We know that a diversity of backgrounds, perspectives and experiences strengthens our teams and is vital to the work we do. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date: 16th June 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible.
Job Title: Principal Structural Engineer Location: Barrow-in-Furness We offer a range of hybrid and flexible working arrangements - please speak to your recruiter about the options for this particular role Salary: Competitive Who we are: Join BAE Systems and you'll be part of something bigger. As a valued member of our global colleague network, you'll bring your unique skills and perspectives to help pioneer progress and protect what matters most. You'll be trusted to play your part in delivering the advanced, technology-led defence, aerospace and security solutions of tomorrow, shaping a safer future, for all of us. From the depths of the ocean, to the far reaches of space, there's no limit to where a career at BAE Systems could take you. Job Description: As a Principal Structural engineer, you will design and analyse complex steel structures using Eurocodes, British Standards and BAE standards whilst applying your expertise in regulations including LOLER, Codes of Compliance, Weld Specifications and Geometric Tolerance. You will interpret data from analytical techniques, support manufacturing, assembly, lifting, handling and the overall installation of submarine structures. Core duties: You will be responsible for the design and analysis of complex steel structures utilising Eurocodes, British Standards and BAE standards You will apply your expertise in regulations and requirements that extend beyond those used within BAE Systems, including LOLER, Codes of Compliance, Weld Specifications, and Geometric Tolerance You will be responsible for interpreting data within a wide range of computer based analytical techniques You will be supporting the manufacturing, assembly, lifting, handling and installation processes of Submarine Structures You will be supporting with the production of concept drawings, layouts and other technical outputs You will be responsible for checking and approving calculations Essential Skills: You will need to hold an Engineering Degree BEng/MEng or have the equivalent experience You are required to have gained Civil / Manufacturing / Structural Based and Chartered Engineer CEng status or Incorporated IEng status nearing CEng status You will need a good expertise within structural steel analysis and design You will be required to be fully conversant in the use of Eurocodes and British Standards You will need to be proficient with the reviewing and checking of design outputs You will need to be experienced in mechanical engineering and/or structural steelwork with knowledge of lifting handling and LOLER The Production Engineering Department team: By joining us in the team, you will work with our designers and engineers to conduct engineering assessments that support the build process, contribute to equipment development and provide operational and production support for safety critical systems within a rapidly growing programme. Relocation support packages are available for all roles, subject to eligibility criteria. Why BAE Systems? Here you'll build a career with purpose and limitless possibilities. With lifelong learning and meaningful work, this is a place where you can grow your career with confidence and be empowered to be your best. You'll be recognised for your contribution and enjoy rewards tailored to what's most important to you and your family, support for your financial and personal wellbeing, as well as a balanced lifestyle. In an environment embracing sustainable ways of working and with a strong sense of shared purpose, our supportive culture is a place you can feel you belong and proud of the difference you make. A place where everyone can thrive: We're committed to building an inclusive workplace where everyone feels valued and supported. We know that a diversity of backgrounds, perspectives and experiences strengthens our teams and is vital to the work we do. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date: 16th June 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible.
Jun 13, 2026
Full time
Job Title: Principal Structural Engineer Location: Barrow-in-Furness We offer a range of hybrid and flexible working arrangements - please speak to your recruiter about the options for this particular role Salary: Competitive Who we are: Join BAE Systems and you'll be part of something bigger. As a valued member of our global colleague network, you'll bring your unique skills and perspectives to help pioneer progress and protect what matters most. You'll be trusted to play your part in delivering the advanced, technology-led defence, aerospace and security solutions of tomorrow, shaping a safer future, for all of us. From the depths of the ocean, to the far reaches of space, there's no limit to where a career at BAE Systems could take you. Job Description: As a Principal Structural engineer, you will design and analyse complex steel structures using Eurocodes, British Standards and BAE standards whilst applying your expertise in regulations including LOLER, Codes of Compliance, Weld Specifications and Geometric Tolerance. You will interpret data from analytical techniques, support manufacturing, assembly, lifting, handling and the overall installation of submarine structures. Core duties: You will be responsible for the design and analysis of complex steel structures utilising Eurocodes, British Standards and BAE standards You will apply your expertise in regulations and requirements that extend beyond those used within BAE Systems, including LOLER, Codes of Compliance, Weld Specifications, and Geometric Tolerance You will be responsible for interpreting data within a wide range of computer based analytical techniques You will be supporting the manufacturing, assembly, lifting, handling and installation processes of Submarine Structures You will be supporting with the production of concept drawings, layouts and other technical outputs You will be responsible for checking and approving calculations Essential Skills: You will need to hold an Engineering Degree BEng/MEng or have the equivalent experience You are required to have gained Civil / Manufacturing / Structural Based and Chartered Engineer CEng status or Incorporated IEng status nearing CEng status You will need a good expertise within structural steel analysis and design You will be required to be fully conversant in the use of Eurocodes and British Standards You will need to be proficient with the reviewing and checking of design outputs You will need to be experienced in mechanical engineering and/or structural steelwork with knowledge of lifting handling and LOLER The Production Engineering Department team: By joining us in the team, you will work with our designers and engineers to conduct engineering assessments that support the build process, contribute to equipment development and provide operational and production support for safety critical systems within a rapidly growing programme. Relocation support packages are available for all roles, subject to eligibility criteria. Why BAE Systems? Here you'll build a career with purpose and limitless possibilities. With lifelong learning and meaningful work, this is a place where you can grow your career with confidence and be empowered to be your best. You'll be recognised for your contribution and enjoy rewards tailored to what's most important to you and your family, support for your financial and personal wellbeing, as well as a balanced lifestyle. In an environment embracing sustainable ways of working and with a strong sense of shared purpose, our supportive culture is a place you can feel you belong and proud of the difference you make. A place where everyone can thrive: We're committed to building an inclusive workplace where everyone feels valued and supported. We know that a diversity of backgrounds, perspectives and experiences strengthens our teams and is vital to the work we do. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date: 16th June 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible.
Job Title: Principal Structural Engineer Location: Barrow-in-Furness We offer a range of hybrid and flexible working arrangements - please speak to your recruiter about the options for this particular role Salary: Competitive Who we are: Join BAE Systems and you'll be part of something bigger. As a valued member of our global colleague network, you'll bring your unique skills and perspectives to help pioneer progress and protect what matters most. You'll be trusted to play your part in delivering the advanced, technology-led defence, aerospace and security solutions of tomorrow, shaping a safer future, for all of us. From the depths of the ocean, to the far reaches of space, there's no limit to where a career at BAE Systems could take you. Job Description: As a Principal Structural engineer, you will design and analyse complex steel structures using Eurocodes, British Standards and BAE standards whilst applying your expertise in regulations including LOLER, Codes of Compliance, Weld Specifications and Geometric Tolerance. You will interpret data from analytical techniques, support manufacturing, assembly, lifting, handling and the overall installation of submarine structures. Core duties: You will be responsible for the design and analysis of complex steel structures utilising Eurocodes, British Standards and BAE standards You will apply your expertise in regulations and requirements that extend beyond those used within BAE Systems, including LOLER, Codes of Compliance, Weld Specifications, and Geometric Tolerance You will be responsible for interpreting data within a wide range of computer based analytical techniques You will be supporting the manufacturing, assembly, lifting, handling and installation processes of Submarine Structures You will be supporting with the production of concept drawings, layouts and other technical outputs You will be responsible for checking and approving calculations Essential Skills: You will need to hold an Engineering Degree BEng/MEng or have the equivalent experience You are required to have gained Civil / Manufacturing / Structural Based and Chartered Engineer CEng status or Incorporated IEng status nearing CEng status You will need a good expertise within structural steel analysis and design You will be required to be fully conversant in the use of Eurocodes and British Standards You will need to be proficient with the reviewing and checking of design outputs You will need to be experienced in mechanical engineering and/or structural steelwork with knowledge of lifting handling and LOLER The Production Engineering Department team: By joining us in the team, you will work with our designers and engineers to conduct engineering assessments that support the build process, contribute to equipment development and provide operational and production support for safety critical systems within a rapidly growing programme. Relocation support packages are available for all roles, subject to eligibility criteria. Why BAE Systems? Here you'll build a career with purpose and limitless possibilities. With lifelong learning and meaningful work, this is a place where you can grow your career with confidence and be empowered to be your best. You'll be recognised for your contribution and enjoy rewards tailored to what's most important to you and your family, support for your financial and personal wellbeing, as well as a balanced lifestyle. In an environment embracing sustainable ways of working and with a strong sense of shared purpose, our supportive culture is a place you can feel you belong and proud of the difference you make. A place where everyone can thrive: We're committed to building an inclusive workplace where everyone feels valued and supported. We know that a diversity of backgrounds, perspectives and experiences strengthens our teams and is vital to the work we do. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date: 16th June 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible.
Jun 13, 2026
Full time
Job Title: Principal Structural Engineer Location: Barrow-in-Furness We offer a range of hybrid and flexible working arrangements - please speak to your recruiter about the options for this particular role Salary: Competitive Who we are: Join BAE Systems and you'll be part of something bigger. As a valued member of our global colleague network, you'll bring your unique skills and perspectives to help pioneer progress and protect what matters most. You'll be trusted to play your part in delivering the advanced, technology-led defence, aerospace and security solutions of tomorrow, shaping a safer future, for all of us. From the depths of the ocean, to the far reaches of space, there's no limit to where a career at BAE Systems could take you. Job Description: As a Principal Structural engineer, you will design and analyse complex steel structures using Eurocodes, British Standards and BAE standards whilst applying your expertise in regulations including LOLER, Codes of Compliance, Weld Specifications and Geometric Tolerance. You will interpret data from analytical techniques, support manufacturing, assembly, lifting, handling and the overall installation of submarine structures. Core duties: You will be responsible for the design and analysis of complex steel structures utilising Eurocodes, British Standards and BAE standards You will apply your expertise in regulations and requirements that extend beyond those used within BAE Systems, including LOLER, Codes of Compliance, Weld Specifications, and Geometric Tolerance You will be responsible for interpreting data within a wide range of computer based analytical techniques You will be supporting the manufacturing, assembly, lifting, handling and installation processes of Submarine Structures You will be supporting with the production of concept drawings, layouts and other technical outputs You will be responsible for checking and approving calculations Essential Skills: You will need to hold an Engineering Degree BEng/MEng or have the equivalent experience You are required to have gained Civil / Manufacturing / Structural Based and Chartered Engineer CEng status or Incorporated IEng status nearing CEng status You will need a good expertise within structural steel analysis and design You will be required to be fully conversant in the use of Eurocodes and British Standards You will need to be proficient with the reviewing and checking of design outputs You will need to be experienced in mechanical engineering and/or structural steelwork with knowledge of lifting handling and LOLER The Production Engineering Department team: By joining us in the team, you will work with our designers and engineers to conduct engineering assessments that support the build process, contribute to equipment development and provide operational and production support for safety critical systems within a rapidly growing programme. Relocation support packages are available for all roles, subject to eligibility criteria. Why BAE Systems? Here you'll build a career with purpose and limitless possibilities. With lifelong learning and meaningful work, this is a place where you can grow your career with confidence and be empowered to be your best. You'll be recognised for your contribution and enjoy rewards tailored to what's most important to you and your family, support for your financial and personal wellbeing, as well as a balanced lifestyle. In an environment embracing sustainable ways of working and with a strong sense of shared purpose, our supportive culture is a place you can feel you belong and proud of the difference you make. A place where everyone can thrive: We're committed to building an inclusive workplace where everyone feels valued and supported. We know that a diversity of backgrounds, perspectives and experiences strengthens our teams and is vital to the work we do. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date: 16th June 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible.
Job Title: Principal Structural Engineer Location: Barrow-in-Furness We offer a range of hybrid and flexible working arrangements - please speak to your recruiter about the options for this particular role Salary: Competitive Who we are: Join BAE Systems and you'll be part of something bigger. As a valued member of our global colleague network, you'll bring your unique skills and perspectives to help pioneer progress and protect what matters most. You'll be trusted to play your part in delivering the advanced, technology-led defence, aerospace and security solutions of tomorrow, shaping a safer future, for all of us. From the depths of the ocean, to the far reaches of space, there's no limit to where a career at BAE Systems could take you. Job Description: As a Principal Structural engineer, you will design and analyse complex steel structures using Eurocodes, British Standards and BAE standards whilst applying your expertise in regulations including LOLER, Codes of Compliance, Weld Specifications and Geometric Tolerance. You will interpret data from analytical techniques, support manufacturing, assembly, lifting, handling and the overall installation of submarine structures. Core duties: You will be responsible for the design and analysis of complex steel structures utilising Eurocodes, British Standards and BAE standards You will apply your expertise in regulations and requirements that extend beyond those used within BAE Systems, including LOLER, Codes of Compliance, Weld Specifications, and Geometric Tolerance You will be responsible for interpreting data within a wide range of computer based analytical techniques You will be supporting the manufacturing, assembly, lifting, handling and installation processes of Submarine Structures You will be supporting with the production of concept drawings, layouts and other technical outputs You will be responsible for checking and approving calculations Essential Skills: You will need to hold an Engineering Degree BEng/MEng or have the equivalent experience You are required to have gained Civil / Manufacturing / Structural Based and Chartered Engineer CEng status or Incorporated IEng status nearing CEng status You will need a good expertise within structural steel analysis and design You will be required to be fully conversant in the use of Eurocodes and British Standards You will need to be proficient with the reviewing and checking of design outputs You will need to be experienced in mechanical engineering and/or structural steelwork with knowledge of lifting handling and LOLER The Production Engineering Department team: By joining us in the team, you will work with our designers and engineers to conduct engineering assessments that support the build process, contribute to equipment development and provide operational and production support for safety critical systems within a rapidly growing programme. Relocation support packages are available for all roles, subject to eligibility criteria. Why BAE Systems? Here you'll build a career with purpose and limitless possibilities. With lifelong learning and meaningful work, this is a place where you can grow your career with confidence and be empowered to be your best. You'll be recognised for your contribution and enjoy rewards tailored to what's most important to you and your family, support for your financial and personal wellbeing, as well as a balanced lifestyle. In an environment embracing sustainable ways of working and with a strong sense of shared purpose, our supportive culture is a place you can feel you belong and proud of the difference you make. A place where everyone can thrive: We're committed to building an inclusive workplace where everyone feels valued and supported. We know that a diversity of backgrounds, perspectives and experiences strengthens our teams and is vital to the work we do. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date: 16th June 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible.
Jun 13, 2026
Full time
Job Title: Principal Structural Engineer Location: Barrow-in-Furness We offer a range of hybrid and flexible working arrangements - please speak to your recruiter about the options for this particular role Salary: Competitive Who we are: Join BAE Systems and you'll be part of something bigger. As a valued member of our global colleague network, you'll bring your unique skills and perspectives to help pioneer progress and protect what matters most. You'll be trusted to play your part in delivering the advanced, technology-led defence, aerospace and security solutions of tomorrow, shaping a safer future, for all of us. From the depths of the ocean, to the far reaches of space, there's no limit to where a career at BAE Systems could take you. Job Description: As a Principal Structural engineer, you will design and analyse complex steel structures using Eurocodes, British Standards and BAE standards whilst applying your expertise in regulations including LOLER, Codes of Compliance, Weld Specifications and Geometric Tolerance. You will interpret data from analytical techniques, support manufacturing, assembly, lifting, handling and the overall installation of submarine structures. Core duties: You will be responsible for the design and analysis of complex steel structures utilising Eurocodes, British Standards and BAE standards You will apply your expertise in regulations and requirements that extend beyond those used within BAE Systems, including LOLER, Codes of Compliance, Weld Specifications, and Geometric Tolerance You will be responsible for interpreting data within a wide range of computer based analytical techniques You will be supporting the manufacturing, assembly, lifting, handling and installation processes of Submarine Structures You will be supporting with the production of concept drawings, layouts and other technical outputs You will be responsible for checking and approving calculations Essential Skills: You will need to hold an Engineering Degree BEng/MEng or have the equivalent experience You are required to have gained Civil / Manufacturing / Structural Based and Chartered Engineer CEng status or Incorporated IEng status nearing CEng status You will need a good expertise within structural steel analysis and design You will be required to be fully conversant in the use of Eurocodes and British Standards You will need to be proficient with the reviewing and checking of design outputs You will need to be experienced in mechanical engineering and/or structural steelwork with knowledge of lifting handling and LOLER The Production Engineering Department team: By joining us in the team, you will work with our designers and engineers to conduct engineering assessments that support the build process, contribute to equipment development and provide operational and production support for safety critical systems within a rapidly growing programme. Relocation support packages are available for all roles, subject to eligibility criteria. Why BAE Systems? Here you'll build a career with purpose and limitless possibilities. With lifelong learning and meaningful work, this is a place where you can grow your career with confidence and be empowered to be your best. You'll be recognised for your contribution and enjoy rewards tailored to what's most important to you and your family, support for your financial and personal wellbeing, as well as a balanced lifestyle. In an environment embracing sustainable ways of working and with a strong sense of shared purpose, our supportive culture is a place you can feel you belong and proud of the difference you make. A place where everyone can thrive: We're committed to building an inclusive workplace where everyone feels valued and supported. We know that a diversity of backgrounds, perspectives and experiences strengthens our teams and is vital to the work we do. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date: 16th June 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible.
LTM Recruitment Specialists Ltd
Newcastle Upon Tyne, Tyne And Wear
My client, one of the best companies in their sector is an expanding international M&E consultancy, with a proven track record in low energy design, focused on providing excellent design solutions to clients. They are looking for a experienced Senior or Principal Mechanical Engineer to be based in our Newcastle office with the ability to inspire others. You will have the ability to run medium sized projects, undertake a client facing role in the development, design and co-ordination of engineering projects. Skills should include experience on data centre and mission critical projects. Other sector experience including commercial, hotel, retail and hotel design desirable. Experience will also include the coordination of engineering project services, with a proven track record in project management. Your excellent communication and interpersonal skills, both with colleagues and clients, and experience working on innovative projects with leading client organisations, and contractors will equip you to take a future pro-active role in forging client relationships of our sector portfolio. You will possess good commercial awareness, in addition to having robust technical knowledge relevant to building services design, and capable of incorporating those technologies into the hotel and leisure sector. The position will ideally suit someone who is currently working in building service consultancy and is prepared to work hands on . The ideal candidate will be a Chartered Engineer or working towards, educated to degree level in Building Services Engineering or equivalent with a minimum of 5 years industry experience. Role Responsibilities • Responsible for running of medium size projects. Undertakes a client facing role in the development and design and coordination of engineering project services for Mechanical installations, systems, equipment, facilities etc. • Develops and specifies applications of controls, instruments, and operating systems for all building engineering services purposes • Surveys tests and reports on existing electrical/mechanical installations • Specifies activities to ensure that manufacturing, construction, installation, and operational testing confirm to functional specifications and customer requirements • Day to day decision making on project progress and direct liaison with and provides advice to client • Represents Company at technical meetings with customers, professional teams and contractors teams • Carries out engineering calculations to ensure drawings meet required robust industry and legal standards • Responsible for technical content and accuracy of Trainee, Graduates and Engineers • Validation and checking of designs and specifications Specific Skills & Knowledge • BEng, MSc, and have sufficient experience • MCIBSE/MIEE or HNC/HND + appropriate experience or equivalent • Working towards Chartered Eng status • Competent in specification design/drawing for several building types • Sound knowledge of key Health and Safety issues and legislation • Knowledge of MS Office applications word, excel etc • Ability to use IT based calculation and spreadsheet software • Good understanding of BS standards • Ability to prioritise own workload • Ability to work to deadlines • Managerial Skills
Jun 13, 2026
Full time
My client, one of the best companies in their sector is an expanding international M&E consultancy, with a proven track record in low energy design, focused on providing excellent design solutions to clients. They are looking for a experienced Senior or Principal Mechanical Engineer to be based in our Newcastle office with the ability to inspire others. You will have the ability to run medium sized projects, undertake a client facing role in the development, design and co-ordination of engineering projects. Skills should include experience on data centre and mission critical projects. Other sector experience including commercial, hotel, retail and hotel design desirable. Experience will also include the coordination of engineering project services, with a proven track record in project management. Your excellent communication and interpersonal skills, both with colleagues and clients, and experience working on innovative projects with leading client organisations, and contractors will equip you to take a future pro-active role in forging client relationships of our sector portfolio. You will possess good commercial awareness, in addition to having robust technical knowledge relevant to building services design, and capable of incorporating those technologies into the hotel and leisure sector. The position will ideally suit someone who is currently working in building service consultancy and is prepared to work hands on . The ideal candidate will be a Chartered Engineer or working towards, educated to degree level in Building Services Engineering or equivalent with a minimum of 5 years industry experience. Role Responsibilities • Responsible for running of medium size projects. Undertakes a client facing role in the development and design and coordination of engineering project services for Mechanical installations, systems, equipment, facilities etc. • Develops and specifies applications of controls, instruments, and operating systems for all building engineering services purposes • Surveys tests and reports on existing electrical/mechanical installations • Specifies activities to ensure that manufacturing, construction, installation, and operational testing confirm to functional specifications and customer requirements • Day to day decision making on project progress and direct liaison with and provides advice to client • Represents Company at technical meetings with customers, professional teams and contractors teams • Carries out engineering calculations to ensure drawings meet required robust industry and legal standards • Responsible for technical content and accuracy of Trainee, Graduates and Engineers • Validation and checking of designs and specifications Specific Skills & Knowledge • BEng, MSc, and have sufficient experience • MCIBSE/MIEE or HNC/HND + appropriate experience or equivalent • Working towards Chartered Eng status • Competent in specification design/drawing for several building types • Sound knowledge of key Health and Safety issues and legislation • Knowledge of MS Office applications word, excel etc • Ability to use IT based calculation and spreadsheet software • Good understanding of BS standards • Ability to prioritise own workload • Ability to work to deadlines • Managerial Skills
LTM Recruitment Specialists Ltd
Newcastle Upon Tyne, Tyne And Wear
My client, arguably one of the best companies in the sector, are an expanding international M&E consultancy, with a proven track record in low energy design, focused on providing excellent design solutions to clients. They are looking to employ an experienced Senior / Principal Engineer to be based in our NE office. You will have experience in the delivery of European data centres and mission-critical projects, along with other sector experience including process pharmaceutical, healthcare, commercial, labs and/or clean rooms would be desirable. Role Responsibilities • Responsible for the running of large projects. Undertakes a client facing role in the development and design and coordination of engineering project services for Mechanical or Electrical installations, systems, equipment, facilities etc. (Several building types) • Develops and specifies applications of controls, instruments, and operating systems for all building engineering services purposes • Surveys, tests, carries out dilapidation reports on existing electrical/mechanical installations • Specifies activities to ensure that manufacturing, construction, installation, and operational testing confirm to functional specifications and customer requirements • Day to day decision making on project progress and direct liaison with and provides advice to client • Represents Company at technical meetings with customers, professional teams and contractors teams • Ensures engineering calculations and drawings meet required robust industry and legal standards • Leads on the coordination of engineering services • Takes a holistic view in the selection and application of engineering concepts and solutions Role Requirements You will need to possess the following professional and technical expertise: • BSc/BEng or degree in appropriate engineering discipline or have sufficient equivalent experience • MCIBSE/MIEE or HNC/HND plus appropriate experience or equivalent • Working towards Chartered Eng status • Significant experience of specification design for several building types • Sound knowledge of key Health and Safety issues and legislation • Knowledge of MS Office applications word, excel etc • Ability to use IT based calculation and spreadsheet software • Good understanding of BS standards/ UK Regulations/Codes • Ability to prioritise own workload • Ability to work to deadlines • Managerial skills • Presentation skills • Support the delivery of projects in accordance with the expectations of the Project Delivery Process from a Project Management, Financial Management, QA/QC and Technical Review perspective.
Jun 13, 2026
Full time
My client, arguably one of the best companies in the sector, are an expanding international M&E consultancy, with a proven track record in low energy design, focused on providing excellent design solutions to clients. They are looking to employ an experienced Senior / Principal Engineer to be based in our NE office. You will have experience in the delivery of European data centres and mission-critical projects, along with other sector experience including process pharmaceutical, healthcare, commercial, labs and/or clean rooms would be desirable. Role Responsibilities • Responsible for the running of large projects. Undertakes a client facing role in the development and design and coordination of engineering project services for Mechanical or Electrical installations, systems, equipment, facilities etc. (Several building types) • Develops and specifies applications of controls, instruments, and operating systems for all building engineering services purposes • Surveys, tests, carries out dilapidation reports on existing electrical/mechanical installations • Specifies activities to ensure that manufacturing, construction, installation, and operational testing confirm to functional specifications and customer requirements • Day to day decision making on project progress and direct liaison with and provides advice to client • Represents Company at technical meetings with customers, professional teams and contractors teams • Ensures engineering calculations and drawings meet required robust industry and legal standards • Leads on the coordination of engineering services • Takes a holistic view in the selection and application of engineering concepts and solutions Role Requirements You will need to possess the following professional and technical expertise: • BSc/BEng or degree in appropriate engineering discipline or have sufficient equivalent experience • MCIBSE/MIEE or HNC/HND plus appropriate experience or equivalent • Working towards Chartered Eng status • Significant experience of specification design for several building types • Sound knowledge of key Health and Safety issues and legislation • Knowledge of MS Office applications word, excel etc • Ability to use IT based calculation and spreadsheet software • Good understanding of BS standards/ UK Regulations/Codes • Ability to prioritise own workload • Ability to work to deadlines • Managerial skills • Presentation skills • Support the delivery of projects in accordance with the expectations of the Project Delivery Process from a Project Management, Financial Management, QA/QC and Technical Review perspective.
Job Title: Principal Embedded Software Engineer Location: North West & Yorkshire Offices Salary: Up to £75k (depending on experience) We re partnering with an established technology engineering organisation seeking a Principal Embedded Software Engineer to lead software architecture, technical delivery, and development strategy across advanced embedded systems. This is a senior, hands-on role combining system architecture, embedded software development, and project ownership. A key aspect of this position is applying electrical power systems knowledge and protection function theory within embedded control environments. If you re a senior embedded engineer looking to influence architecture, lead delivery, and work on complex real-time systems, we want to hear from you! About the Role Define and own embedded software architecture and technical direction Lead delivery of complex embedded projects to time and quality targets Develop and maintain robust C/C++ embedded codebases Translate system requirements into structured deliverables Guide design decisions and review implementation approaches Oversee testing strategy, documentation, and release quality Identify technical risks and implement mitigation strategies Drive Agile processes and continuous improvement practices Collaborate cross-functionally with engineering and project stakeholders About you Degree (or equivalent experience) in Computer Science, Electronics, or similar Advanced C/C++ embedded development experience Strong background in embedded systems design Experience working with real-time operating systems (e.g., FreeRTOS) Solid understanding of multithreading and concurrency Networking knowledge including TCP/IP, UDP and secure communications Experience with embedded Linux or RTOS environments Knowledge of electrical power systems and protection function theory Experience delivering commercial embedded products end-to-end Peripheral interfacing experience (SPI, I2C, memory interfaces) Debugging complex real-time or multithreaded systems Desirable Experience Linux-based embedded platforms or containerised environments Python or scripting languages CI/CD pipelines and DevOps tooling Industrial communication protocols or automation systems Cybersecurity concepts within embedded environments Cloud or enterprise platform integration Wireless communications (WiFi, Bluetooth, Zigbee) Please note, we cannot offer sponsorship for this role. If interested, please send over an updated CV.
Jun 13, 2026
Full time
Job Title: Principal Embedded Software Engineer Location: North West & Yorkshire Offices Salary: Up to £75k (depending on experience) We re partnering with an established technology engineering organisation seeking a Principal Embedded Software Engineer to lead software architecture, technical delivery, and development strategy across advanced embedded systems. This is a senior, hands-on role combining system architecture, embedded software development, and project ownership. A key aspect of this position is applying electrical power systems knowledge and protection function theory within embedded control environments. If you re a senior embedded engineer looking to influence architecture, lead delivery, and work on complex real-time systems, we want to hear from you! About the Role Define and own embedded software architecture and technical direction Lead delivery of complex embedded projects to time and quality targets Develop and maintain robust C/C++ embedded codebases Translate system requirements into structured deliverables Guide design decisions and review implementation approaches Oversee testing strategy, documentation, and release quality Identify technical risks and implement mitigation strategies Drive Agile processes and continuous improvement practices Collaborate cross-functionally with engineering and project stakeholders About you Degree (or equivalent experience) in Computer Science, Electronics, or similar Advanced C/C++ embedded development experience Strong background in embedded systems design Experience working with real-time operating systems (e.g., FreeRTOS) Solid understanding of multithreading and concurrency Networking knowledge including TCP/IP, UDP and secure communications Experience with embedded Linux or RTOS environments Knowledge of electrical power systems and protection function theory Experience delivering commercial embedded products end-to-end Peripheral interfacing experience (SPI, I2C, memory interfaces) Debugging complex real-time or multithreaded systems Desirable Experience Linux-based embedded platforms or containerised environments Python or scripting languages CI/CD pipelines and DevOps tooling Industrial communication protocols or automation systems Cybersecurity concepts within embedded environments Cloud or enterprise platform integration Wireless communications (WiFi, Bluetooth, Zigbee) Please note, we cannot offer sponsorship for this role. If interested, please send over an updated CV.
Principal Control Systems Engineer Sheffield - Hybrid Full-time Are you ready to lead complex control systems projects from concept through to delivery? Do you enjoy combining technical leadership with client-facing responsibility? Could this be the step up where your engineering expertise shapes major projects in highly regulated environments? What's in it for you? Fantastic basic salary 25 days annual click apply for full job details
Jun 12, 2026
Full time
Principal Control Systems Engineer Sheffield - Hybrid Full-time Are you ready to lead complex control systems projects from concept through to delivery? Do you enjoy combining technical leadership with client-facing responsibility? Could this be the step up where your engineering expertise shapes major projects in highly regulated environments? What's in it for you? Fantastic basic salary 25 days annual click apply for full job details
Are you a Business Development Manager that has existing relationships with electrical contractors, M&E firms or main contractors delivering commercial projects? Have you sold fire alarms, CCTV, access control, intruder alarms or life safety systems into the construction sector? If so, this could be the opportunity you've been looking for. Benefits: Mansfield, Nottinghamshire (Office-Based with UK Travel) Competitive Basic Salary + Uncapped Commission + Car Allowance 22 + 8 bank holidays Full time permanent role Uncapped commission structure. Company vehicle or car allowance. Opportunity to shape and grow a key business division. Support from an established delivery, engineering and project management team. Genuine long-term career progression within a growing Fire & Security business. About the Company Our client is an established and trusted provider of integrated fire, security and life safety solutions across the UK. Delivering CCTV, Access Control, Intruder Alarm, Fire Detection and Life Safety Systems to commercial and retail clients nationwide, they are now seeking an experienced Sales & Business Development Manager to lead this expansion. The Role This is a strategic business development role focused on generating opportunities with electrical contractors, M&E contractors, consultants and main contractors who require specialist fire and security systems as part of larger construction, refurbishment and fit-out projects. You will be responsible for identifying projects at pre-construction stage, building long-term relationships with key decision-makers and securing opportunities for the company's fire and security solutions across the UK. Key Responsibilities Develop new business opportunities with electrical contractors, M&E contractors and principal contractors. Promote Fire Alarm, CCTV, Access Control, Intruder Alarm and Integrated Security Solutions. Build relationships with Estimators, Project Managers, Contracts Managers, Commercial Managers and Directors. Identify upcoming projects, tenders and framework opportunities. Attend client meetings, networking events and industry exhibitions. Prepare and submit proposals, quotations and tender responses. Work closely with estimating, design and operations teams to ensure successful project delivery. Maintain a strong pipeline of opportunities and achieve agreed sales targets. Skills/Experience required: Proven Business Development experience within the Fire & Security sector. Strong understanding of CCTV, Access Control, Intruder Alarms and Fire Detection Systems. Experience selling into electrical contractors, M&E contractors, consultants or main contractors. Existing industry network and ability to open doors with key decision-makers. Strong commercial awareness and understanding of construction project lifecycles. Motivated, ambitious and target-driven. Full UK Driving Licence. This role would suit a Fire & Security, Sales Manager or Business Development Manager, looking to leverage their industry contacts and play a pivotal role in the growth of a respected security and life safety specialist.
Jun 12, 2026
Full time
Are you a Business Development Manager that has existing relationships with electrical contractors, M&E firms or main contractors delivering commercial projects? Have you sold fire alarms, CCTV, access control, intruder alarms or life safety systems into the construction sector? If so, this could be the opportunity you've been looking for. Benefits: Mansfield, Nottinghamshire (Office-Based with UK Travel) Competitive Basic Salary + Uncapped Commission + Car Allowance 22 + 8 bank holidays Full time permanent role Uncapped commission structure. Company vehicle or car allowance. Opportunity to shape and grow a key business division. Support from an established delivery, engineering and project management team. Genuine long-term career progression within a growing Fire & Security business. About the Company Our client is an established and trusted provider of integrated fire, security and life safety solutions across the UK. Delivering CCTV, Access Control, Intruder Alarm, Fire Detection and Life Safety Systems to commercial and retail clients nationwide, they are now seeking an experienced Sales & Business Development Manager to lead this expansion. The Role This is a strategic business development role focused on generating opportunities with electrical contractors, M&E contractors, consultants and main contractors who require specialist fire and security systems as part of larger construction, refurbishment and fit-out projects. You will be responsible for identifying projects at pre-construction stage, building long-term relationships with key decision-makers and securing opportunities for the company's fire and security solutions across the UK. Key Responsibilities Develop new business opportunities with electrical contractors, M&E contractors and principal contractors. Promote Fire Alarm, CCTV, Access Control, Intruder Alarm and Integrated Security Solutions. Build relationships with Estimators, Project Managers, Contracts Managers, Commercial Managers and Directors. Identify upcoming projects, tenders and framework opportunities. Attend client meetings, networking events and industry exhibitions. Prepare and submit proposals, quotations and tender responses. Work closely with estimating, design and operations teams to ensure successful project delivery. Maintain a strong pipeline of opportunities and achieve agreed sales targets. Skills/Experience required: Proven Business Development experience within the Fire & Security sector. Strong understanding of CCTV, Access Control, Intruder Alarms and Fire Detection Systems. Experience selling into electrical contractors, M&E contractors, consultants or main contractors. Existing industry network and ability to open doors with key decision-makers. Strong commercial awareness and understanding of construction project lifecycles. Motivated, ambitious and target-driven. Full UK Driving Licence. This role would suit a Fire & Security, Sales Manager or Business Development Manager, looking to leverage their industry contacts and play a pivotal role in the growth of a respected security and life safety specialist.
