Maintenance Technician Salary: Dependent on experience Location: Glenrothes Contract: Permanent Hours: Double Days 6am-2pm & 2pm-10pm Role Summary An excellent opportunity is available for a Maintenance Technician to join a leading engineering and manufacturing environment supporting the production of high-quality industrial equipment. The Maintenance Technician will play a key role in maintaining manufacturing assets, improving equipment reliability, reducing downtime, and supporting continuous improvement activities across the facility. The facility is a precision machining and assembly site, you will be working with CNC machines, PLCs, and a combination of hydraulic, mechanical and electrical components. Role & Responsibilities Build and maintain strong knowledge of manufacturing equipment and maintenance techniques Support equipment reliability improvements through planned maintenance activities Identify and eliminate root causes of unplanned downtime Complete planned and reactive maintenance activities to a high standard Support continuous improvement initiatives and identify opportunities to reduce waste Share technical knowledge and information with colleagues across the business Assist with identifying common equipment faults and implementing corrective actions Contribute to improving maintenance systems, procedures, and work standards Design and implement minor equipment improvements where required Support Health & Safety standards within the manufacturing environment Work collaboratively within the engineering team to ensure operational efficiency The Maintenance Technician will support ongoing production performance through effective maintenance activities Requirements of the Role ONC/HNC in Mechanical or Electrical Engineering or equivalent experience Previous experience within a manufacturing or engineering environment Previous experience working on CNC machinery, with PLCs or with hydraulics would be advantageous Good working knowledge of maintenance techniques and equipment reliability Strong understanding of Health & Safety requirements Good communication and interpersonal skills Enthusiastic approach with willingness to learn and develop acThe successful Maintenance Technician will demonstrate strong technical and organisational skills Experience supporting continuous improvement activities is highly desirable The Maintenance Technician should be capable of working independently and collaboratively Apply Now If you are an experienced Maintenance Technician looking for your next opportunity within an advanced engineering environment, apply now for further information on this Maintenance Technician opportunity.
Jun 10, 2026
Full time
Maintenance Technician Salary: Dependent on experience Location: Glenrothes Contract: Permanent Hours: Double Days 6am-2pm & 2pm-10pm Role Summary An excellent opportunity is available for a Maintenance Technician to join a leading engineering and manufacturing environment supporting the production of high-quality industrial equipment. The Maintenance Technician will play a key role in maintaining manufacturing assets, improving equipment reliability, reducing downtime, and supporting continuous improvement activities across the facility. The facility is a precision machining and assembly site, you will be working with CNC machines, PLCs, and a combination of hydraulic, mechanical and electrical components. Role & Responsibilities Build and maintain strong knowledge of manufacturing equipment and maintenance techniques Support equipment reliability improvements through planned maintenance activities Identify and eliminate root causes of unplanned downtime Complete planned and reactive maintenance activities to a high standard Support continuous improvement initiatives and identify opportunities to reduce waste Share technical knowledge and information with colleagues across the business Assist with identifying common equipment faults and implementing corrective actions Contribute to improving maintenance systems, procedures, and work standards Design and implement minor equipment improvements where required Support Health & Safety standards within the manufacturing environment Work collaboratively within the engineering team to ensure operational efficiency The Maintenance Technician will support ongoing production performance through effective maintenance activities Requirements of the Role ONC/HNC in Mechanical or Electrical Engineering or equivalent experience Previous experience within a manufacturing or engineering environment Previous experience working on CNC machinery, with PLCs or with hydraulics would be advantageous Good working knowledge of maintenance techniques and equipment reliability Strong understanding of Health & Safety requirements Good communication and interpersonal skills Enthusiastic approach with willingness to learn and develop acThe successful Maintenance Technician will demonstrate strong technical and organisational skills Experience supporting continuous improvement activities is highly desirable The Maintenance Technician should be capable of working independently and collaboratively Apply Now If you are an experienced Maintenance Technician looking for your next opportunity within an advanced engineering environment, apply now for further information on this Maintenance Technician opportunity.
Ref 10649 Machine Maintenance Operative Location: Mansfield, Nottinghamshire Salary: 32,800 plus outstanding benefits once permanent including monthly production bonus Shift: double day shift due to location and working hours own transport is essential Temp to perm role We have a fantastic opportunity for a Machine Maintenance Operative to join a well-established and ever-growing company. Our client has sites around the world and is looking for someone to join their Mansfield team. You will be a part of their engineering team who are responsible for keeping machines running and in good condition. Are you looking for your next role being a part of a forward thinking and proactive team? Read below for the duties: Duties for the Machine Maintenance Operative Effective operation of all CNC machines in the machine shop. Providing Support in ancillary areas when required. Liaise with cell technicians & skilled CNC machinist when required. Inspect and work with inspection cell as required. Carry out routine housekeeping duties. Ensure work order routines are filled out correctly at every stage. Personal Attributes for the Machine Maintenance Operative Excellent communication skills. Proactive with excellent attention to detail. The perfect candidate would have experience working within a machine shop/engineering environment. Ability to complete work in a timely manner. Previous engineering experience is required ideally with CNC Knowledge This would ideally suit a college/school leaver who has an interest in engineering (Btec or A Levels in technical subjects would be preferred) If you think the above attributes describe you and the duties are something which you can do and are interested in then please apply below. We would love to hear from you! This vacancy is being advertised by Fresh Start Recruitment (UK) who are acting as an Employment Agency. Due to the high volumes of applications we are currently receiving, unfortunately we are only able to contact candidates who are successful in progressing to the next stage. If you have not been contacted within 7 days of your application, then please presume that you have not been successful on this occasion.
Jun 07, 2026
Full time
Ref 10649 Machine Maintenance Operative Location: Mansfield, Nottinghamshire Salary: 32,800 plus outstanding benefits once permanent including monthly production bonus Shift: double day shift due to location and working hours own transport is essential Temp to perm role We have a fantastic opportunity for a Machine Maintenance Operative to join a well-established and ever-growing company. Our client has sites around the world and is looking for someone to join their Mansfield team. You will be a part of their engineering team who are responsible for keeping machines running and in good condition. Are you looking for your next role being a part of a forward thinking and proactive team? Read below for the duties: Duties for the Machine Maintenance Operative Effective operation of all CNC machines in the machine shop. Providing Support in ancillary areas when required. Liaise with cell technicians & skilled CNC machinist when required. Inspect and work with inspection cell as required. Carry out routine housekeeping duties. Ensure work order routines are filled out correctly at every stage. Personal Attributes for the Machine Maintenance Operative Excellent communication skills. Proactive with excellent attention to detail. The perfect candidate would have experience working within a machine shop/engineering environment. Ability to complete work in a timely manner. Previous engineering experience is required ideally with CNC Knowledge This would ideally suit a college/school leaver who has an interest in engineering (Btec or A Levels in technical subjects would be preferred) If you think the above attributes describe you and the duties are something which you can do and are interested in then please apply below. We would love to hear from you! This vacancy is being advertised by Fresh Start Recruitment (UK) who are acting as an Employment Agency. Due to the high volumes of applications we are currently receiving, unfortunately we are only able to contact candidates who are successful in progressing to the next stage. If you have not been contacted within 7 days of your application, then please presume that you have not been successful on this occasion.
Our client is a world leading manufacturer of heavy construction equipment. Due to growth they require Maintenance Technicians to work from their busy Teesside facility on a long-term contract basis which may lead to permanent employment. Standard day rate is £23.48/hr with uplifts for shift-work and overtime. The Role As a Maintenance Technician you will be responsible for the maintenance of electrical and mechanical equipment accountable for the general and preventive maintenance and repairs of the buildings, vehicles, all factory equipment including Lasers, CNC machinery and General Jigs and fixtures. Continual development and operation of Planned Preventative Maintenance Ensure all building structure, machines, equipment are all well maintained and in working condition and safe order by performing preventive maintenance planning, ensure scheduled work and improvement projects are carried out promptly and completed in the shortest possible time to shorten operations down time and reduce productivity Working within a small maintenance team. Repair and Planned Preventative Maintenance of all existing machines, jigs and fixtures throughout the production area to ensure capability and repeatability to maintain high quality Work with both Mechanical and Electrical Contractors on site under permit Developing work procedures and standards for Electrical and mechanical Respond to all machinery breakdown and log any productions issues going forward Support the Technical Resources Services Department in an advisory capacity in the installation of new equipment. The Person Electrically biased with a good mechanical understanding Knowledge of machine shop equipment within a manufacturing support function related to jig and tool and all other production equipment Requires working experience and technical knowledge in the maintenance of processes, equipment, fittings, all jigs and fixtures Excellent problem-solving skills required to quickly and correctly identify production related problems, to resolve these problems using the correct diagnostic approach and then match the personnel at their disposal to the technical requirements of the situation, determining the best sequence to complete outstanding work to achieve and maintain customer satisfaction and production objectives. Previous experience in a similar role.
Jun 07, 2026
Contractor
Our client is a world leading manufacturer of heavy construction equipment. Due to growth they require Maintenance Technicians to work from their busy Teesside facility on a long-term contract basis which may lead to permanent employment. Standard day rate is £23.48/hr with uplifts for shift-work and overtime. The Role As a Maintenance Technician you will be responsible for the maintenance of electrical and mechanical equipment accountable for the general and preventive maintenance and repairs of the buildings, vehicles, all factory equipment including Lasers, CNC machinery and General Jigs and fixtures. Continual development and operation of Planned Preventative Maintenance Ensure all building structure, machines, equipment are all well maintained and in working condition and safe order by performing preventive maintenance planning, ensure scheduled work and improvement projects are carried out promptly and completed in the shortest possible time to shorten operations down time and reduce productivity Working within a small maintenance team. Repair and Planned Preventative Maintenance of all existing machines, jigs and fixtures throughout the production area to ensure capability and repeatability to maintain high quality Work with both Mechanical and Electrical Contractors on site under permit Developing work procedures and standards for Electrical and mechanical Respond to all machinery breakdown and log any productions issues going forward Support the Technical Resources Services Department in an advisory capacity in the installation of new equipment. The Person Electrically biased with a good mechanical understanding Knowledge of machine shop equipment within a manufacturing support function related to jig and tool and all other production equipment Requires working experience and technical knowledge in the maintenance of processes, equipment, fittings, all jigs and fixtures Excellent problem-solving skills required to quickly and correctly identify production related problems, to resolve these problems using the correct diagnostic approach and then match the personnel at their disposal to the technical requirements of the situation, determining the best sequence to complete outstanding work to achieve and maintain customer satisfaction and production objectives. Previous experience in a similar role.
Gi group are currently seeking competent and skilled Composites Fitter / Assembly Technician with composite pre-preg experience to join our rapidly expanding Team with our client based in Catcliffe, Rotheram. This role will be permanent after successful 3 month period. Working Monday to Friday, 6am - 2pm and 2pm - 10pm shifts rotating weekly. Some weekend overtime available. Pay rates 16.29 - Monday - Friday up to 37.5 hours 24.44 - overtime rate after 37.5 hours and Saturdays 32.58 - Sundays and bank holidays Principle Accountabilities Production of Automotive parts using Pre-Preg composite materials. Adherence to validated process cycle/TAKT times Responsible for maintaining the highest quality standards on all manufactured composites components. Support Team Leader with prioritising work and other activities. Contribute to training and development of other team members. Ensure the work area is clean, tidy and orderly always in line with brand expectations and maintain a safe working environment for yourself and others. Proactively contributing to develop processes to improve quality and efficiency. Set an example to production operatives. Provide support on all processes in the department. Working to challenging and demanding deadlines. Knowledge, Skills and Experience A previous background in composites manufacturing and the associated Assembly/Fitting processes is essential. Pre-preg assembly/fitting experience, including hand trimming parts and experience using various hand tools, CNC/Robot operation, Bonding processes using various adhesives etc. Thorough understanding of composite materials. Experience & understanding of Quality issues. Has developed proficiency in a range of processes or procedures through job-related training and considerable on the-job expertise. Must demonstrate previous experience of using their own initiative and work under minimum supervision. Ability to read and draw information from engineering drawings/manuals Have a good knowledge base of materials Personal Attributes Excellent communication skills and ability to effectively communicate with stakeholders at all levels. Able to adopt a professional and mature attitude to work and other people. Enthusiastic, and highly self-motivated. Proactive - takes opportunity to use initiative where possible. Team player - supports other team members, department strategies and processes. Determined - results focused, driven to do the very best possible. Flexibility towards overtime when available. Excellent attendance and time keeping For more information please apply online with an up to date CV or call Ryan on (phone number removed) Should you require any support or assistance, please contact your local Gi Group office. Gi Group Holdings Recruitment Limited are proud founding members of Menopause in business, corperate members for Neurodiversity in business, Disability Confident committed members, Gold status for the Armed Forces Covenant, Bronze trail blazers for Racial Equality matters and Age Freindly Employer pledge members. Gi Group Holdings Recruitment Limited group of companies includes Gi Recruitment Limited, Draefern Limited, Gi Group Recruitment Ltd, INTOO (UK) Limited, Marks Sattin (UK) Limited, TACK TMI UK Limited, Grafton Professional Staffing Limited, Encore Personnel Services, Gi Group Ireland Limited and Kelly Services (UK) Ltd. Gi Group Ireland Limited are acting as an Employment Agency in relation to this role. We are committed to protecting the privacy of all our candidates and clients. If you choose to apply, your information will be processed in accordance with the Gi Group Privacy Statement. To view a copy and to help you understand how we collect, use and process your personal data please visit the Privacy page on our Gi Group website.
Jun 07, 2026
Seasonal
Gi group are currently seeking competent and skilled Composites Fitter / Assembly Technician with composite pre-preg experience to join our rapidly expanding Team with our client based in Catcliffe, Rotheram. This role will be permanent after successful 3 month period. Working Monday to Friday, 6am - 2pm and 2pm - 10pm shifts rotating weekly. Some weekend overtime available. Pay rates 16.29 - Monday - Friday up to 37.5 hours 24.44 - overtime rate after 37.5 hours and Saturdays 32.58 - Sundays and bank holidays Principle Accountabilities Production of Automotive parts using Pre-Preg composite materials. Adherence to validated process cycle/TAKT times Responsible for maintaining the highest quality standards on all manufactured composites components. Support Team Leader with prioritising work and other activities. Contribute to training and development of other team members. Ensure the work area is clean, tidy and orderly always in line with brand expectations and maintain a safe working environment for yourself and others. Proactively contributing to develop processes to improve quality and efficiency. Set an example to production operatives. Provide support on all processes in the department. Working to challenging and demanding deadlines. Knowledge, Skills and Experience A previous background in composites manufacturing and the associated Assembly/Fitting processes is essential. Pre-preg assembly/fitting experience, including hand trimming parts and experience using various hand tools, CNC/Robot operation, Bonding processes using various adhesives etc. Thorough understanding of composite materials. Experience & understanding of Quality issues. Has developed proficiency in a range of processes or procedures through job-related training and considerable on the-job expertise. Must demonstrate previous experience of using their own initiative and work under minimum supervision. Ability to read and draw information from engineering drawings/manuals Have a good knowledge base of materials Personal Attributes Excellent communication skills and ability to effectively communicate with stakeholders at all levels. Able to adopt a professional and mature attitude to work and other people. Enthusiastic, and highly self-motivated. Proactive - takes opportunity to use initiative where possible. Team player - supports other team members, department strategies and processes. Determined - results focused, driven to do the very best possible. Flexibility towards overtime when available. Excellent attendance and time keeping For more information please apply online with an up to date CV or call Ryan on (phone number removed) Should you require any support or assistance, please contact your local Gi Group office. Gi Group Holdings Recruitment Limited are proud founding members of Menopause in business, corperate members for Neurodiversity in business, Disability Confident committed members, Gold status for the Armed Forces Covenant, Bronze trail blazers for Racial Equality matters and Age Freindly Employer pledge members. Gi Group Holdings Recruitment Limited group of companies includes Gi Recruitment Limited, Draefern Limited, Gi Group Recruitment Ltd, INTOO (UK) Limited, Marks Sattin (UK) Limited, TACK TMI UK Limited, Grafton Professional Staffing Limited, Encore Personnel Services, Gi Group Ireland Limited and Kelly Services (UK) Ltd. Gi Group Ireland Limited are acting as an Employment Agency in relation to this role. We are committed to protecting the privacy of all our candidates and clients. If you choose to apply, your information will be processed in accordance with the Gi Group Privacy Statement. To view a copy and to help you understand how we collect, use and process your personal data please visit the Privacy page on our Gi Group website.
Ref 10649 CNC Operator Location: Mansfield, Nottinghamshire Salary: 32,800 plus outstanding benefits once permanent including monthly production bonus Shift: double day shift due to location and working hours own transport is essential Temp to perm role We have a fantastic opportunity for a CNC Operator to join a well-established and ever-growing company. Our client has sites around the world and is looking for someone to join their Mansfield team. You will be a part of their engineering team who are responsible for keeping machines running and in good condition. Are you looking for your next role being a part of a forward thinking and proactive team? Read below for the duties: Duties for the CNC Operator Effective operation of all CNC machines in the machine shop. Providing Support in ancillary areas when required. Liaise with cell technicians & skilled CNC machinist when required. Inspect and work with inspection cell as required. Carry out routine housekeeping duties. Ensure work order routines are filled out correctly at every stage. Personal Attributes for the CNC Operator Excellent communication skills. Proactive with excellent attention to detail. The perfect candidate would have experience working within a machine shop/engineering environment. Ability to complete work in a timely manner. Previous engineering experience is required ideally with CNC Knowledge This would ideally suit a college/school leaver who has an interest in engineering (Btec or A Levels in technical subjects would be preferred) If you think the above attributes describe you and the duties are something which you can do and are interested in then please apply below. We would love to hear from you! This vacancy is being advertised by Fresh Start Recruitment (UK) who are acting as an Employment Agency. Due to the high volumes of applications we are currently receiving, unfortunately we are only able to contact candidates who are successful in progressing to the next stage. If you have not been contacted within 7 days of your application, then please presume that you have not been successful on this occasion.
Jun 05, 2026
Full time
Ref 10649 CNC Operator Location: Mansfield, Nottinghamshire Salary: 32,800 plus outstanding benefits once permanent including monthly production bonus Shift: double day shift due to location and working hours own transport is essential Temp to perm role We have a fantastic opportunity for a CNC Operator to join a well-established and ever-growing company. Our client has sites around the world and is looking for someone to join their Mansfield team. You will be a part of their engineering team who are responsible for keeping machines running and in good condition. Are you looking for your next role being a part of a forward thinking and proactive team? Read below for the duties: Duties for the CNC Operator Effective operation of all CNC machines in the machine shop. Providing Support in ancillary areas when required. Liaise with cell technicians & skilled CNC machinist when required. Inspect and work with inspection cell as required. Carry out routine housekeeping duties. Ensure work order routines are filled out correctly at every stage. Personal Attributes for the CNC Operator Excellent communication skills. Proactive with excellent attention to detail. The perfect candidate would have experience working within a machine shop/engineering environment. Ability to complete work in a timely manner. Previous engineering experience is required ideally with CNC Knowledge This would ideally suit a college/school leaver who has an interest in engineering (Btec or A Levels in technical subjects would be preferred) If you think the above attributes describe you and the duties are something which you can do and are interested in then please apply below. We would love to hear from you! This vacancy is being advertised by Fresh Start Recruitment (UK) who are acting as an Employment Agency. Due to the high volumes of applications we are currently receiving, unfortunately we are only able to contact candidates who are successful in progressing to the next stage. If you have not been contacted within 7 days of your application, then please presume that you have not been successful on this occasion.
Precision CNC toolmaker/ machinist Bridgwater Area 42,000 per annum + Bonus Permanent Introduction Acorn by Synergie is recruiting for a CNC Toolmaker / Tooling Technician to join a skilled manufacturing team in the Bridgwater area. This hands-on role focuses on precision toolmaking to tight tolerances, supporting production agility, equipment reliability, and site safety. You will play a key role in manufacturing and refurbishing tooling to exacting standards while contributing to continuous improvement initiatives across the site. Key Duties: Manufacture and refurbish high-precision, low-tolerance tooling from technical drawings. Operate CNC and manual workshop equipment, including XYZ ProTrak machines. Work closely with design teams to develop new tooling solutions. Provide timely engineering solutions to manufacturing challenges. Support improvements to tooling and production processes. Maintain a clean, safe, and efficient workshop environment. Assist the maintenance team when required. Contribute to Manufacturing Excellence and Continuous Improvement initiatives. Support and mentor colleagues and apprentices where appropriate. Requirements: Apprentice-trained NVQ or equivalent engineering qualification. Proven experience in precision machining, tool design, and fabrication. Skilled in high-precision, low-tolerance toolmaking. Experience operating CNC and manual machining equipment. Experience with XYZ ProTrak machines beneficial. Strong attention to detail and ability to work to tight tolerances. Excellent problem-solving and time management skills. Strong communication and teamwork abilities. Innovative and proactive approach to work. What We Offer: 42,000 per annum. Bonus scheme. Excellent benefits package. Subsidised canteen. 33 days holiday. Permanent long-term opportunity. Supportive manufacturing environment with career development opportunities. Interested? Apply now with your up-to-date CV to be considered for this CNC Toolmaker / Tooling Technician opportunity in the Bridgwater area. Acorn by Synergie acts as an employment agency for permanent recruitment.
Jun 05, 2026
Full time
Precision CNC toolmaker/ machinist Bridgwater Area 42,000 per annum + Bonus Permanent Introduction Acorn by Synergie is recruiting for a CNC Toolmaker / Tooling Technician to join a skilled manufacturing team in the Bridgwater area. This hands-on role focuses on precision toolmaking to tight tolerances, supporting production agility, equipment reliability, and site safety. You will play a key role in manufacturing and refurbishing tooling to exacting standards while contributing to continuous improvement initiatives across the site. Key Duties: Manufacture and refurbish high-precision, low-tolerance tooling from technical drawings. Operate CNC and manual workshop equipment, including XYZ ProTrak machines. Work closely with design teams to develop new tooling solutions. Provide timely engineering solutions to manufacturing challenges. Support improvements to tooling and production processes. Maintain a clean, safe, and efficient workshop environment. Assist the maintenance team when required. Contribute to Manufacturing Excellence and Continuous Improvement initiatives. Support and mentor colleagues and apprentices where appropriate. Requirements: Apprentice-trained NVQ or equivalent engineering qualification. Proven experience in precision machining, tool design, and fabrication. Skilled in high-precision, low-tolerance toolmaking. Experience operating CNC and manual machining equipment. Experience with XYZ ProTrak machines beneficial. Strong attention to detail and ability to work to tight tolerances. Excellent problem-solving and time management skills. Strong communication and teamwork abilities. Innovative and proactive approach to work. What We Offer: 42,000 per annum. Bonus scheme. Excellent benefits package. Subsidised canteen. 33 days holiday. Permanent long-term opportunity. Supportive manufacturing environment with career development opportunities. Interested? Apply now with your up-to-date CV to be considered for this CNC Toolmaker / Tooling Technician opportunity in the Bridgwater area. Acorn by Synergie acts as an employment agency for permanent recruitment.
Manufacturing Technician - Precision SealsLiverpoolCompetitive salary plus shift allowance - details on request12-hour day shifts (Mon-Wed Week 1 / Thu-Sat Week 2)PermanentAn excellent opportunity has arisen for an experienced Manufacturing Technician to join a precision manufacturing environment in Liverpool. This is a newly created role supporting the introduction of an in-house capability for producing critical precision sealing components.Working within a dedicated machining cell, you'll set and operate Okuma 5-axis machining centres to produce small batch, high-precision components in specialist elastomers and engineering plastics.This is a highly autonomous role working closely with Engineering, suited to someone who enjoys independent working within a technical and detail-focused manufacturing environment.Key Responsibilities• Set and operate 5-axis CNC machining centres • Manufacture precision seals to tight tolerances • Use inspection equipment including probing and CMM • Read and interpret technical drawings • Maintain high standards of quality, safety and housekeeping Requirements• Time-served machining/manufacturing background • Experience setting and operating 5-axis CNC machinery • Strong precision engineering experience • Excellent attention to detail and ability to work independently Desirable• Okuma controls experience • Grinding experience (surface/internal) • Experience in controlled or high-precision manufacturing environments Small batch production environment with strong engineering involvement and high technical standards.If this sounds like the right next step in your career, please send across your CV to be considered. Important Information: We endeavour to process your personal data in a fair and transparent manner. In applying for this role, Russell Taylor will be acting within your interest and will contact you in relation to the role, either by email, phone or text message. For more information see our on our website. It is important you are aware of your individual rights and the provisions the company has put in place to protect your data. If you would like further information on the policy or GDPR please get in touch with us .
Jun 04, 2026
Full time
Manufacturing Technician - Precision SealsLiverpoolCompetitive salary plus shift allowance - details on request12-hour day shifts (Mon-Wed Week 1 / Thu-Sat Week 2)PermanentAn excellent opportunity has arisen for an experienced Manufacturing Technician to join a precision manufacturing environment in Liverpool. This is a newly created role supporting the introduction of an in-house capability for producing critical precision sealing components.Working within a dedicated machining cell, you'll set and operate Okuma 5-axis machining centres to produce small batch, high-precision components in specialist elastomers and engineering plastics.This is a highly autonomous role working closely with Engineering, suited to someone who enjoys independent working within a technical and detail-focused manufacturing environment.Key Responsibilities• Set and operate 5-axis CNC machining centres • Manufacture precision seals to tight tolerances • Use inspection equipment including probing and CMM • Read and interpret technical drawings • Maintain high standards of quality, safety and housekeeping Requirements• Time-served machining/manufacturing background • Experience setting and operating 5-axis CNC machinery • Strong precision engineering experience • Excellent attention to detail and ability to work independently Desirable• Okuma controls experience • Grinding experience (surface/internal) • Experience in controlled or high-precision manufacturing environments Small batch production environment with strong engineering involvement and high technical standards.If this sounds like the right next step in your career, please send across your CV to be considered. Important Information: We endeavour to process your personal data in a fair and transparent manner. In applying for this role, Russell Taylor will be acting within your interest and will contact you in relation to the role, either by email, phone or text message. For more information see our on our website. It is important you are aware of your individual rights and the provisions the company has put in place to protect your data. If you would like further information on the policy or GDPR please get in touch with us .
Are you an experienced CNC Turner looking to join a high-performing precision engineering team? We are seeking a skilled and motivated CNC Turner to programme, set, and operate CNC turning machines within a modern and fast-paced machine shop environment. You will play a key role in delivering high-quality precision components across a diverse range of engineering projects. This is an excellent opportunity for a proactive engineer who takes pride in their workmanship and thrives in a continuous improvement culture. The Opportunity Working alongside a team of experienced engineers and CNC technicians, you will be responsible for producing precision components to the highest quality standards while ensuring delivery schedules are achieved. You will report directly to the Turning Team Leader and Production Manager and contribute to ongoing process and tooling improvements across multiple programmes. Key Responsibilities Programming, setting, and operating CNC turning machines Working with Mazak and Okuma controls (Mazatrol / Fanuc) Reading and interpreting detailed engineering drawings Understanding and analysing CNC programs and machine movements Selecting appropriate tooling and cutting inserts for optimal performance Liaising with tooling suppliers when required Conducting in-process inspection using hand measuring equipment Maintaining strict in-process quality control standards Troubleshooting machining and programming issues Supporting machining process improvements and fixture/tooling development Ensuring production targets and delivery deadlines are consistently met What We re Looking For Essential: Minimum 5 years experience in a CNC turning role Strong experience programming CNC machinery Ability to work independently and use own initiative Proven problem-solving ability in a machining environment Strong understanding of precision engineering drawings High attention to detail and quality standards Good communication and organisational skills Qualifications: - GCSE / O-Level (or equivalent) Essential Skills & Experience: - Proven ability to program CNC machinery independently - Strong organisational skills with the ability to prioritise workload effectively - Logical, pragmatic approach to problem-solving within a machining environment - Continuous improvement mindset able to identify and act on opportunities to improve processes, performance, and efficiency - Clear and effective communication skills - Strong time management with the ability to meet production deadlines - Ability to work collaboratively with quality and production teams to optimise performance - Confident working from both verbal and written engineering instructions - Commitment to high housekeeping standards and 5S principles - Competent IT skills, including Microsoft Office Desirable (Advantageous but Not Essential) Experience programming Mazak (Mazatrol) controls Experience programming Okuma (Fanuc) controls Knowledge of Lean Manufacturing principles Experience using structured problem-solving methods such as 8D
Jun 03, 2026
Full time
Are you an experienced CNC Turner looking to join a high-performing precision engineering team? We are seeking a skilled and motivated CNC Turner to programme, set, and operate CNC turning machines within a modern and fast-paced machine shop environment. You will play a key role in delivering high-quality precision components across a diverse range of engineering projects. This is an excellent opportunity for a proactive engineer who takes pride in their workmanship and thrives in a continuous improvement culture. The Opportunity Working alongside a team of experienced engineers and CNC technicians, you will be responsible for producing precision components to the highest quality standards while ensuring delivery schedules are achieved. You will report directly to the Turning Team Leader and Production Manager and contribute to ongoing process and tooling improvements across multiple programmes. Key Responsibilities Programming, setting, and operating CNC turning machines Working with Mazak and Okuma controls (Mazatrol / Fanuc) Reading and interpreting detailed engineering drawings Understanding and analysing CNC programs and machine movements Selecting appropriate tooling and cutting inserts for optimal performance Liaising with tooling suppliers when required Conducting in-process inspection using hand measuring equipment Maintaining strict in-process quality control standards Troubleshooting machining and programming issues Supporting machining process improvements and fixture/tooling development Ensuring production targets and delivery deadlines are consistently met What We re Looking For Essential: Minimum 5 years experience in a CNC turning role Strong experience programming CNC machinery Ability to work independently and use own initiative Proven problem-solving ability in a machining environment Strong understanding of precision engineering drawings High attention to detail and quality standards Good communication and organisational skills Qualifications: - GCSE / O-Level (or equivalent) Essential Skills & Experience: - Proven ability to program CNC machinery independently - Strong organisational skills with the ability to prioritise workload effectively - Logical, pragmatic approach to problem-solving within a machining environment - Continuous improvement mindset able to identify and act on opportunities to improve processes, performance, and efficiency - Clear and effective communication skills - Strong time management with the ability to meet production deadlines - Ability to work collaboratively with quality and production teams to optimise performance - Confident working from both verbal and written engineering instructions - Commitment to high housekeeping standards and 5S principles - Competent IT skills, including Microsoft Office Desirable (Advantageous but Not Essential) Experience programming Mazak (Mazatrol) controls Experience programming Okuma (Fanuc) controls Knowledge of Lean Manufacturing principles Experience using structured problem-solving methods such as 8D
Maintenance Engineer Cambridge Area 32,000 - 42,000 To lead both proactive and reactive/breakdown maintenance across all Our Clients sites, focusing on reducing the incident of breakdowns and improving production facilities. Ensuring that machinery and equipment operates smoothly and reliably. THE ROLE The role also takes ownership of all electrical and mechanical work, ensuring compliance with regulations and standards. It includes leading agreed facilities projects such as refits, upgrades, and equipment installations, managing work from planning to completion, including snagging and testing. The post ensures all maintenance and project work is carried out safely, efficiently, and reliably to support smooth operations. Key Responsibilities Safety and Compliance - following the rules and regulations related to health and safety in the workplace. Among these are wearing the appropriate Personal Protective Equipment (PPE), using safe work practices, and understanding emergency procedures. Equipment Inspection and Troubleshooting: - to identify whether work equipment can be operated, adjusted, and maintained safely. Repair and Maintenance - restoration work when an asset breaks, gets damaged, or stops working. Carrying out routine activities and/or corrective or preventive repair done on assets to prevent damage and prolong the life expectancy. Emergency Repairs - ensuring response to emergency calls for equipment breakdowns and prioritisation of urgent repairs to minimize downtime. Preventive Maintenance - plan and implement a rigorous machine maintenance program, which meets audit and legal compliance regulations. Covering the routine maintenance of equipment and assets to keep them running and prevent any costly unplanned downtime from unexpected equipment failure. Electrical & Mechanical Work - provide technical support on aspects of M&E compliance, statutory legislation, standards validation, project snagging, equipment factory acceptance testing, and M&E site control. Documentation and Reporting - maintenance of detailed records of maintenance work, including parts used and hours worked. Generating reports for management and supervisors. Continuous Learning - stay updated on industry trends, new technologies, and best practices. Attending training sessions and workshops as needed. Facilities Project Management - lead agreed facilities projects, including refits, upgrades, and equipment installations. Manage all stages from planning to completion, ensuring snagging, testing, and handover are completed safely, on time, and to the required standard. General responsibilities: Health & Safety Responsibilities All employees are responsible for adhering to health and safety procedures and guidelines, ensuring a safe working environment for themselves and others. Any accidents, near misses, or concerns must be reported to the Health & Safety Manager and/or their line manager immediately. Quality Responsibilities Quality is the responsibility of every individual within the company. Each employee contributes to Our Clients quality objectives and plays a key role in fostering a quality-focused culture. It is essential to uphold high standards to ensure that customer needs and expectations are fully met. Person Specification Skills: Knowledge of PUWER regulations Mechanical / Electrical Biased Engineer Interacting with suppliers, overseeing a team and managing budgets Ability to understand a variety of engineering procedures and functions Team-working skills to liaise and work cooperatively with individuals at all levels Negotiation skills and the ability to persuade others Excellent diagnostic and problem-solving skills Ability to work under pressure Interpersonal and people-management skills Maintenance Engineer / Service Engineer / PUWER Regulations / PLC / Fault Finding / Mechanical Technician / Service Engineer / CNC Maintenance / CNC Engineer / CNC service Engineer Call Settings Override To From Record Yes No Always use these settings
Oct 07, 2025
Full time
Maintenance Engineer Cambridge Area 32,000 - 42,000 To lead both proactive and reactive/breakdown maintenance across all Our Clients sites, focusing on reducing the incident of breakdowns and improving production facilities. Ensuring that machinery and equipment operates smoothly and reliably. THE ROLE The role also takes ownership of all electrical and mechanical work, ensuring compliance with regulations and standards. It includes leading agreed facilities projects such as refits, upgrades, and equipment installations, managing work from planning to completion, including snagging and testing. The post ensures all maintenance and project work is carried out safely, efficiently, and reliably to support smooth operations. Key Responsibilities Safety and Compliance - following the rules and regulations related to health and safety in the workplace. Among these are wearing the appropriate Personal Protective Equipment (PPE), using safe work practices, and understanding emergency procedures. Equipment Inspection and Troubleshooting: - to identify whether work equipment can be operated, adjusted, and maintained safely. Repair and Maintenance - restoration work when an asset breaks, gets damaged, or stops working. Carrying out routine activities and/or corrective or preventive repair done on assets to prevent damage and prolong the life expectancy. Emergency Repairs - ensuring response to emergency calls for equipment breakdowns and prioritisation of urgent repairs to minimize downtime. Preventive Maintenance - plan and implement a rigorous machine maintenance program, which meets audit and legal compliance regulations. Covering the routine maintenance of equipment and assets to keep them running and prevent any costly unplanned downtime from unexpected equipment failure. Electrical & Mechanical Work - provide technical support on aspects of M&E compliance, statutory legislation, standards validation, project snagging, equipment factory acceptance testing, and M&E site control. Documentation and Reporting - maintenance of detailed records of maintenance work, including parts used and hours worked. Generating reports for management and supervisors. Continuous Learning - stay updated on industry trends, new technologies, and best practices. Attending training sessions and workshops as needed. Facilities Project Management - lead agreed facilities projects, including refits, upgrades, and equipment installations. Manage all stages from planning to completion, ensuring snagging, testing, and handover are completed safely, on time, and to the required standard. General responsibilities: Health & Safety Responsibilities All employees are responsible for adhering to health and safety procedures and guidelines, ensuring a safe working environment for themselves and others. Any accidents, near misses, or concerns must be reported to the Health & Safety Manager and/or their line manager immediately. Quality Responsibilities Quality is the responsibility of every individual within the company. Each employee contributes to Our Clients quality objectives and plays a key role in fostering a quality-focused culture. It is essential to uphold high standards to ensure that customer needs and expectations are fully met. Person Specification Skills: Knowledge of PUWER regulations Mechanical / Electrical Biased Engineer Interacting with suppliers, overseeing a team and managing budgets Ability to understand a variety of engineering procedures and functions Team-working skills to liaise and work cooperatively with individuals at all levels Negotiation skills and the ability to persuade others Excellent diagnostic and problem-solving skills Ability to work under pressure Interpersonal and people-management skills Maintenance Engineer / Service Engineer / PUWER Regulations / PLC / Fault Finding / Mechanical Technician / Service Engineer / CNC Maintenance / CNC Engineer / CNC service Engineer Call Settings Override To From Record Yes No Always use these settings
Adecco are pleased to be recruiting for a Radio Communications Technician to join the Civil Nuclear Constabulary (CNC). Location: Culham, Oxfordshire (office based, some travel may be required - would be fully funded) Salary: Range from 35,854 to 39,929 plus a 2,000 South East allowance p/a Contract: Permanent, full-time 37.5 hours per week Critical to the operational capability of front-line officers is the ability to interoperate, predominantly with Home Office and Police Scotland forces and all emergency services including Special Forces when necessary. The Operational Communications Team ensures that this ability is always provisioned with minimum compromise to the Concept of Operations. The Operational Communications (OC) Team is responsible for the management, provision, and support of the mission-critical voice communications systems (currently Airwave TETRA) used by front line police officers, control room staff and partnership agencies (SL Guard Forces) deployed nationally across the nuclear licensed sites where Civil Nuclear Constabulary (CNC) has a presence. This includes ensuring the security of the assets, contract and service management, interoperability with other emergency services, Special Forces, and other agencies. The team must prepare for ESN, whilst delivering an effective BAU service capability and an increasing requirement to inform and deliver Operational Communications work streams or projects within the CNC's Project Portfolio and Ambition work - the most significant being ESN , Airwave's replacement. Provide technical and subject matter expertise and promote emerging technologies which can support or enhance both current and future operational communications with the CNC. Job Purpose: Plan, implement and deliver specific work streams/projects in support of the Operational Communications Strategy and Constabulary initiatives, within both the Business as Usual and Change (Projects) arenas. Specific responsibility for resolving faults and issues relating to devices fitted within vehicles or fixed positions and site-specific and specialist Ops Comms kit and equipment. Provide an intelligent delivery function and additional resilience in support of the activities of the team. Employ and develop best practices such as; ITIL, Lean Six Sigma and Prince 2 and use these to engage in and drive OC workstreams and projects to a successful conclusion Technical/Specialist: Demonstrate an understanding of both the technical and contextual issues and effectively articulate the issue/requirements/outcomes etc. Develop and maintain a comprehensive understanding of the OC team's functional areas to provided resilience as necessary, to include but not limited to; the break/fix process and helpdesk monitoring, auditing and reprogramming and other specialist activities. Provide relevant and timely responses to issues arising and contribute to effective resolutions developed by the team, which could include site visits to the Operational Units. Provide tactical and operational advice and guidance as appropriate, translating technical concepts to suit a non-technical audience. Maintain and develop technical knowledge of Airwave and Operational Communications issues, best practice and standards. Develop and maintain a knowledge of ESN - the Emergency Services Network which will replace Airwave within the next 5 years. Knowledge & Skills Required: Hold a vocational qualification/ work experience in Radio Engineer or related technical discipline. Experience of operating in teams with cross-functional stakeholders Demonstrable experience of effective planning, production of documentation, impact assessments and change control. Demonstrable experience of installing, integrating and maintaining of technical radio or communications systems in a service role. Understand the project lifecycle and the use of methodologies such as; Prince 2, ITIL and Lean Six Sigma and the ability to effectively apply them. Experience of capturing and effectively communicating issues, risks, impacts, requirements and outcomes. Ability to organise own workload, set priorities and deadlines, proactive attitude and able to flex with competing priorities. Apply Now: If you have the skills and experience required for this role, we encourage you to apply. Should your CV be shortlisted, an Adecco Consultant will contact you to discuss progressing your application to the Force. Important Eligibility Information: Due to Police recruitment criteria, applicants must have lived continuously in the UK for the past five years. Unfortunately, applications that do not meet this requirement cannot be considered. Please note that any job offer made by the Force will be subject to Police Vetting procedures. Adecco acts as an employment agency for permanent recruitment and an employment business for the supply of temporary workers. The Adecco Group UK & Ireland is an Equal Opportunities Employer. By applying for this role your details will be submitted to Adecco. Our Candidate Privacy Information Statement explains how we will use your information - please copy and paste the following link in to your browser (url removed)
Oct 07, 2025
Full time
Adecco are pleased to be recruiting for a Radio Communications Technician to join the Civil Nuclear Constabulary (CNC). Location: Culham, Oxfordshire (office based, some travel may be required - would be fully funded) Salary: Range from 35,854 to 39,929 plus a 2,000 South East allowance p/a Contract: Permanent, full-time 37.5 hours per week Critical to the operational capability of front-line officers is the ability to interoperate, predominantly with Home Office and Police Scotland forces and all emergency services including Special Forces when necessary. The Operational Communications Team ensures that this ability is always provisioned with minimum compromise to the Concept of Operations. The Operational Communications (OC) Team is responsible for the management, provision, and support of the mission-critical voice communications systems (currently Airwave TETRA) used by front line police officers, control room staff and partnership agencies (SL Guard Forces) deployed nationally across the nuclear licensed sites where Civil Nuclear Constabulary (CNC) has a presence. This includes ensuring the security of the assets, contract and service management, interoperability with other emergency services, Special Forces, and other agencies. The team must prepare for ESN, whilst delivering an effective BAU service capability and an increasing requirement to inform and deliver Operational Communications work streams or projects within the CNC's Project Portfolio and Ambition work - the most significant being ESN , Airwave's replacement. Provide technical and subject matter expertise and promote emerging technologies which can support or enhance both current and future operational communications with the CNC. Job Purpose: Plan, implement and deliver specific work streams/projects in support of the Operational Communications Strategy and Constabulary initiatives, within both the Business as Usual and Change (Projects) arenas. Specific responsibility for resolving faults and issues relating to devices fitted within vehicles or fixed positions and site-specific and specialist Ops Comms kit and equipment. Provide an intelligent delivery function and additional resilience in support of the activities of the team. Employ and develop best practices such as; ITIL, Lean Six Sigma and Prince 2 and use these to engage in and drive OC workstreams and projects to a successful conclusion Technical/Specialist: Demonstrate an understanding of both the technical and contextual issues and effectively articulate the issue/requirements/outcomes etc. Develop and maintain a comprehensive understanding of the OC team's functional areas to provided resilience as necessary, to include but not limited to; the break/fix process and helpdesk monitoring, auditing and reprogramming and other specialist activities. Provide relevant and timely responses to issues arising and contribute to effective resolutions developed by the team, which could include site visits to the Operational Units. Provide tactical and operational advice and guidance as appropriate, translating technical concepts to suit a non-technical audience. Maintain and develop technical knowledge of Airwave and Operational Communications issues, best practice and standards. Develop and maintain a knowledge of ESN - the Emergency Services Network which will replace Airwave within the next 5 years. Knowledge & Skills Required: Hold a vocational qualification/ work experience in Radio Engineer or related technical discipline. Experience of operating in teams with cross-functional stakeholders Demonstrable experience of effective planning, production of documentation, impact assessments and change control. Demonstrable experience of installing, integrating and maintaining of technical radio or communications systems in a service role. Understand the project lifecycle and the use of methodologies such as; Prince 2, ITIL and Lean Six Sigma and the ability to effectively apply them. Experience of capturing and effectively communicating issues, risks, impacts, requirements and outcomes. Ability to organise own workload, set priorities and deadlines, proactive attitude and able to flex with competing priorities. Apply Now: If you have the skills and experience required for this role, we encourage you to apply. Should your CV be shortlisted, an Adecco Consultant will contact you to discuss progressing your application to the Force. Important Eligibility Information: Due to Police recruitment criteria, applicants must have lived continuously in the UK for the past five years. Unfortunately, applications that do not meet this requirement cannot be considered. Please note that any job offer made by the Force will be subject to Police Vetting procedures. Adecco acts as an employment agency for permanent recruitment and an employment business for the supply of temporary workers. The Adecco Group UK & Ireland is an Equal Opportunities Employer. By applying for this role your details will be submitted to Adecco. Our Candidate Privacy Information Statement explains how we will use your information - please copy and paste the following link in to your browser (url removed)
Tool Technician Based in Wotton, Surrey (Own transport is required due to Rural location) Monday - Friday / 8am - 4.30pm The Tool technician is tasked with supporting the production department daily, based in the tool room. Working with other team members cleaning and servicing of Injection moulding tools with timely turnaround to maintain production schedules. The cleaning and servicing of the injection moulding tools requires good attention to detail and quality of workmanship that are vital to this role. What You'll Be Doing The Tooling technician will be servicing and cleaning injection mould tools, stripping them down for cleaning, inspecting for issues and reporting any found, reassembling the tools after servicing, and returning the tools to the production department. On occasion other responsibilities for the repair, maintenance, and calibration of tools, jigs, fixtures, and instruments may be required Daily servicing & cleaning of mould tools in the tool room or in the factory. Carrying out the repairs, modifications and servicing of injection moulding tools and other associated tooling. Document service & repair work by completing electronic records, including photographs of issues documented. At times support production by completing cleans or repairs in the clean room factory. To carry out, cleaning and servicing on other toolroom and production equipment as required from time to time. Assist in equipment repairs and breakdown if required. Maintaining a clean and safe working environment. What You'll Bring You will hold a C&G's, NVQ or Apprenticeship trained Solid experience in mechanical assembly & disassembly and basic wiring. Experience of Manual and CNC machine tools to include all or some of the following: Surface Grinder, CNC, VMC, Milling and Centre Lathe Mechanical Engineering / toolmaker apprenticeship, with experience in injection molding tools although not essential. High precision injection tooling, polishing, and finishing experience is desirable. Hot runner experience and multi-cavity high is also advantageous Be able to read and understand 2D component Drawings, experience with wiring drawings also advantageous Core Computer skills using email, excel and word documents. Work in a small team with good communication & co-operation Ability to work under pressure and keep to deadlines. Ability to adapt to change and maintain a positive attitude and continuous improvements.
Oct 07, 2025
Full time
Tool Technician Based in Wotton, Surrey (Own transport is required due to Rural location) Monday - Friday / 8am - 4.30pm The Tool technician is tasked with supporting the production department daily, based in the tool room. Working with other team members cleaning and servicing of Injection moulding tools with timely turnaround to maintain production schedules. The cleaning and servicing of the injection moulding tools requires good attention to detail and quality of workmanship that are vital to this role. What You'll Be Doing The Tooling technician will be servicing and cleaning injection mould tools, stripping them down for cleaning, inspecting for issues and reporting any found, reassembling the tools after servicing, and returning the tools to the production department. On occasion other responsibilities for the repair, maintenance, and calibration of tools, jigs, fixtures, and instruments may be required Daily servicing & cleaning of mould tools in the tool room or in the factory. Carrying out the repairs, modifications and servicing of injection moulding tools and other associated tooling. Document service & repair work by completing electronic records, including photographs of issues documented. At times support production by completing cleans or repairs in the clean room factory. To carry out, cleaning and servicing on other toolroom and production equipment as required from time to time. Assist in equipment repairs and breakdown if required. Maintaining a clean and safe working environment. What You'll Bring You will hold a C&G's, NVQ or Apprenticeship trained Solid experience in mechanical assembly & disassembly and basic wiring. Experience of Manual and CNC machine tools to include all or some of the following: Surface Grinder, CNC, VMC, Milling and Centre Lathe Mechanical Engineering / toolmaker apprenticeship, with experience in injection molding tools although not essential. High precision injection tooling, polishing, and finishing experience is desirable. Hot runner experience and multi-cavity high is also advantageous Be able to read and understand 2D component Drawings, experience with wiring drawings also advantageous Core Computer skills using email, excel and word documents. Work in a small team with good communication & co-operation Ability to work under pressure and keep to deadlines. Ability to adapt to change and maintain a positive attitude and continuous improvements.
PWS Worksurfaces
Heighington Village, County Durham
Overview At our award-winning worksurfaces facility, we combine state-of-the-art technology with expert craftsmanship to deliver high-quality, bespoke granite worktops. We're growing our CAM team and are looking for a skilled CAM Technician to help us achieve right-first-time results and on-time delivery for our customers. Reporting to the CAM Technical Leader, the CAM Technician role is responsible for translating approved digital templates and CAD drawings into accurate, efficient CNC programs to support the production of precision-engineered granite worktops. Working within the manufacturing team at our Newton Aycliffe facility, this role ensures optimal material usage, machine efficiency, and adherence to quality standards. The CAM Programmer also collaborates closely with CAD technicians, production teams, and external partners to resolve any discrepancies in templating or specifications, ensuring seamless workflow and consistent delivery of right-first time (RFT) products. Responsibilities Interpret detailed CAD drawings provided by the design team to create accurate CNC machine programs for cutting and finishing granite worktops. Prepare and optimise CAM files (e.g., toolpaths, nesting, cutting strategies) to ensure efficient use of materials and machine time. Configure and maintain machine setup parameters in line with production requirements and job specifications. Verify and simulate toolpaths to detect and resolve errors before releasing programs to the production floor. Collaborate with the production team to ensure CAM outputs align with manufacturing capabilities and constraints. Support resolution of any technical issues or discrepancies arising during CNC machining related to programming. Communicate with CAD technicians regarding any missing or unclear information in drawings that may affect programming accuracy. Ensure that all CAM outputs meet Right First Time (RFT) standards to support high-quality production and reduce rework. Maintain organised KPI records of all programs, setup sheets, and documentation for traceability and repeatability. Adhere to all safety protocols, company policies, and quality standards throughout the programming process. Contribute to continuous improvement initiatives to enhance programming efficiency and production throughput. Essential Requirements Strong ability to read and interpret CAD drawings and digital templates for conversion into precise CNC programs. Excellent time management and organisational skills, with the ability to prioritise tasks in a high-volume production environment. High level of numerical accuracy and attention to detail in programming and material optimisation. Effective communicator with the ability to collaborate across teams, including CAD, production, sales, and subcontractors. Results-driven, with a commitment to achieving deadlines and meeting quality standards consistently. Adaptable and open to change, especially in response to design revisions, technical challenges, or urgent production needs. Demonstrates resilience, with a proactive and flexible approach to problem-solving and continuous improvement. Strong analytical skills and the ability to develop logical, efficient machining strategies and solutions. Understanding of the importance of production performance metrics and quality KPIs, including RFT and OTIF. Awareness of customer expectations and a clear understanding of the cost and impact of programming errors or poor quality. Working knowledge of health & safety practices within a manufacturing environment is advantageous. Desirable but not essential: NVQ or Level 3 Diploma in Engineering, Manufacturing, or CNC Machining. Experience within the kitchen industry. Office Based (Newton Aycliffe) Working hours: 8.30am - 5pm, Monday to Friday Job Types: Full-time, Permanent Pay: £26,865.70-£27,682.59 per year Benefits: Company events Cycle to work scheme Employee discount Free parking Life insurance On-site parking Referral programme Ability to commute/relocate: Newton Aycliffe DL5 6AJ: reliably commute or plan to relocate before starting work (required) Work Location: In person
Oct 04, 2025
Full time
Overview At our award-winning worksurfaces facility, we combine state-of-the-art technology with expert craftsmanship to deliver high-quality, bespoke granite worktops. We're growing our CAM team and are looking for a skilled CAM Technician to help us achieve right-first-time results and on-time delivery for our customers. Reporting to the CAM Technical Leader, the CAM Technician role is responsible for translating approved digital templates and CAD drawings into accurate, efficient CNC programs to support the production of precision-engineered granite worktops. Working within the manufacturing team at our Newton Aycliffe facility, this role ensures optimal material usage, machine efficiency, and adherence to quality standards. The CAM Programmer also collaborates closely with CAD technicians, production teams, and external partners to resolve any discrepancies in templating or specifications, ensuring seamless workflow and consistent delivery of right-first time (RFT) products. Responsibilities Interpret detailed CAD drawings provided by the design team to create accurate CNC machine programs for cutting and finishing granite worktops. Prepare and optimise CAM files (e.g., toolpaths, nesting, cutting strategies) to ensure efficient use of materials and machine time. Configure and maintain machine setup parameters in line with production requirements and job specifications. Verify and simulate toolpaths to detect and resolve errors before releasing programs to the production floor. Collaborate with the production team to ensure CAM outputs align with manufacturing capabilities and constraints. Support resolution of any technical issues or discrepancies arising during CNC machining related to programming. Communicate with CAD technicians regarding any missing or unclear information in drawings that may affect programming accuracy. Ensure that all CAM outputs meet Right First Time (RFT) standards to support high-quality production and reduce rework. Maintain organised KPI records of all programs, setup sheets, and documentation for traceability and repeatability. Adhere to all safety protocols, company policies, and quality standards throughout the programming process. Contribute to continuous improvement initiatives to enhance programming efficiency and production throughput. Essential Requirements Strong ability to read and interpret CAD drawings and digital templates for conversion into precise CNC programs. Excellent time management and organisational skills, with the ability to prioritise tasks in a high-volume production environment. High level of numerical accuracy and attention to detail in programming and material optimisation. Effective communicator with the ability to collaborate across teams, including CAD, production, sales, and subcontractors. Results-driven, with a commitment to achieving deadlines and meeting quality standards consistently. Adaptable and open to change, especially in response to design revisions, technical challenges, or urgent production needs. Demonstrates resilience, with a proactive and flexible approach to problem-solving and continuous improvement. Strong analytical skills and the ability to develop logical, efficient machining strategies and solutions. Understanding of the importance of production performance metrics and quality KPIs, including RFT and OTIF. Awareness of customer expectations and a clear understanding of the cost and impact of programming errors or poor quality. Working knowledge of health & safety practices within a manufacturing environment is advantageous. Desirable but not essential: NVQ or Level 3 Diploma in Engineering, Manufacturing, or CNC Machining. Experience within the kitchen industry. Office Based (Newton Aycliffe) Working hours: 8.30am - 5pm, Monday to Friday Job Types: Full-time, Permanent Pay: £26,865.70-£27,682.59 per year Benefits: Company events Cycle to work scheme Employee discount Free parking Life insurance On-site parking Referral programme Ability to commute/relocate: Newton Aycliffe DL5 6AJ: reliably commute or plan to relocate before starting work (required) Work Location: In person
Production Technician ReeVR Talent are working with a cutting-edge Engineering business with a dedicated team offering its customers unrivalled design, and manufacture. They are looking for a multiskilled Production Technician who holds strong manufacturing capabilities to join the team on their success journey. Your responsibilities and Impact: Working with a variety of materials including Titanium, Aluminium, and Stainless-Steel. Accurately measure parts using a CMM machine and operating a manual CNC machine. Collaborate with Account Managers and Engineers Providing manufacturability feedback on proposed designs. Ensure your work meets both customer and internal requirements. Specify new tooling in response to customer needs. Required Skills & Experience: Engineering workshop experience involving precise processes and assembly. Ability to interpret engineering drawings and workshop instructions. Proficiency in using computers and relevant software (training will be provided on specific software). Ability to solve problems and overcome challenges, ensuring deliveries are met (thinking on your feet). Ability to appreciate and understand all workshop processes. Willingness to work across other workshop areas as required and maintain a positive attitude. Production Technician Requirements: Ability to complete work quickly and efficiently without compromising quality. Strong teamwork and respect for colleagues. Professional, flexible, and effective under pressure. Results-focused with excellent communication skills. Positive attitude toward continuous improvement and change. Why you should join the team: Competitive salary and generous holiday entitlement. A dynamic work environment with a focus on quality and teamwork. Opportunities for personal development and growth in an innovative sector. Working Hours: 37.5 hours per week, 7:00am 16:00pm If you are passionate about engineering, motivated to work in a collaborative environment, and ready to bring your skills, we'd love to hear from you! Apply today or contact Abby Maslin at ReeVR Talent to find out more.
Oct 04, 2025
Full time
Production Technician ReeVR Talent are working with a cutting-edge Engineering business with a dedicated team offering its customers unrivalled design, and manufacture. They are looking for a multiskilled Production Technician who holds strong manufacturing capabilities to join the team on their success journey. Your responsibilities and Impact: Working with a variety of materials including Titanium, Aluminium, and Stainless-Steel. Accurately measure parts using a CMM machine and operating a manual CNC machine. Collaborate with Account Managers and Engineers Providing manufacturability feedback on proposed designs. Ensure your work meets both customer and internal requirements. Specify new tooling in response to customer needs. Required Skills & Experience: Engineering workshop experience involving precise processes and assembly. Ability to interpret engineering drawings and workshop instructions. Proficiency in using computers and relevant software (training will be provided on specific software). Ability to solve problems and overcome challenges, ensuring deliveries are met (thinking on your feet). Ability to appreciate and understand all workshop processes. Willingness to work across other workshop areas as required and maintain a positive attitude. Production Technician Requirements: Ability to complete work quickly and efficiently without compromising quality. Strong teamwork and respect for colleagues. Professional, flexible, and effective under pressure. Results-focused with excellent communication skills. Positive attitude toward continuous improvement and change. Why you should join the team: Competitive salary and generous holiday entitlement. A dynamic work environment with a focus on quality and teamwork. Opportunities for personal development and growth in an innovative sector. Working Hours: 37.5 hours per week, 7:00am 16:00pm If you are passionate about engineering, motivated to work in a collaborative environment, and ready to bring your skills, we'd love to hear from you! Apply today or contact Abby Maslin at ReeVR Talent to find out more.
Adecco are pleased to be recruiting for a Operational Communications Technician to join the Civil Nuclear Constabulary (CNC). Location: Culham, Oxfordshire (office based, some travel may be required - would be fully funded) Salary: Range from 35,854 to 39,929 plus a 2,000 South East allowance p/a Contract: Permanent, full-time 37.5 hours per week Critical to the operational capability of front-line officers is the ability to interoperate, predominantly with Home Office and Police Scotland forces and all emergency services including Special Forces when necessary. The Operational Communications Team ensures that this ability is always provisioned with minimum compromise to the Concept of Operations. The Operational Communications (OC) Team is responsible for the management, provision, and support of the mission-critical voice communications systems (currently Airwave TETRA) used by front line police officers, control room staff and partnership agencies (SL Guard Forces) deployed nationally across the nuclear licensed sites where Civil Nuclear Constabulary (CNC) has a presence. This includes ensuring the security of the assets, contract and service management, interoperability with other emergency services, Special Forces, and other agencies. The team must prepare for ESN, whilst delivering an effective BAU service capability and an increasing requirement to inform and deliver Operational Communications work streams or projects within the CNC's Project Portfolio and Ambition work - the most significant being ESN , Airwave's replacement. Provide technical and subject matter expertise and promote emerging technologies which can support or enhance both current and future operational communications with the CNC. Job Purpose: Plan, implement and deliver specific work streams/projects in support of the Operational Communications Strategy and Constabulary initiatives, within both the Business as Usual and Change (Projects) arenas. Specific responsibility for resolving faults and issues relating to devices fitted within vehicles or fixed positions and site-specific and specialist Ops Comms kit and equipment. Provide an intelligent delivery function and additional resilience in support of the activities of the team. Employ and develop best practices such as; ITIL, Lean Six Sigma and Prince 2 and use these to engage in and drive OC workstreams and projects to a successful conclusion Technical/Specialist: Demonstrate an understanding of both the technical and contextual issues and effectively articulate the issue/requirements/outcomes etc. Develop and maintain a comprehensive understanding of the OC team's functional areas to provided resilience as necessary, to include but not limited to; the break/fix process and helpdesk monitoring, auditing and reprogramming and other specialist activities. Provide relevant and timely responses to issues arising and contribute to effective resolutions developed by the team, which could include site visits to the Operational Units. Provide tactical and operational advice and guidance as appropriate, translating technical concepts to suit a non-technical audience. Maintain and develop technical knowledge of Airwave and Operational Communications issues, best practice and standards. Develop and maintain a knowledge of ESN - the Emergency Services Network which will replace Airwave within the next 5 years. Knowledge & Skills Required: Hold a vocational qualification/ work experience in Radio Engineer or related technical discipline. Experience of operating in teams with cross-functional stakeholders Demonstrable experience of effective planning, production of documentation, impact assessments and change control. Demonstrable experience of installing, integrating and maintaining of technical radio or communications systems in a service role. Understand the project lifecycle and the use of methodologies such as; Prince 2, ITIL and Lean Six Sigma and the ability to effectively apply them. Experience of capturing and effectively communicating issues, risks, impacts, requirements and outcomes. Ability to organise own workload, set priorities and deadlines, proactive attitude and able to flex with competing priorities. Apply Now: If you have the skills and experience required for this role, we encourage you to apply. Should your CV be shortlisted, an Adecco Consultant will contact you to discuss progressing your application to the Force. Important Eligibility Information: Due to Police recruitment criteria, applicants must have lived continuously in the UK for the past five years. Unfortunately, applications that do not meet this requirement cannot be considered. Please note that any job offer made by the Force will be subject to Police Vetting procedures. Adecco acts as an employment agency for permanent recruitment and an employment business for the supply of temporary workers. The Adecco Group UK & Ireland is an Equal Opportunities Employer. By applying for this role your details will be submitted to Adecco. Our Candidate Privacy Information Statement explains how we will use your information - please copy and paste the following link in to your browser (url removed)
Oct 03, 2025
Full time
Adecco are pleased to be recruiting for a Operational Communications Technician to join the Civil Nuclear Constabulary (CNC). Location: Culham, Oxfordshire (office based, some travel may be required - would be fully funded) Salary: Range from 35,854 to 39,929 plus a 2,000 South East allowance p/a Contract: Permanent, full-time 37.5 hours per week Critical to the operational capability of front-line officers is the ability to interoperate, predominantly with Home Office and Police Scotland forces and all emergency services including Special Forces when necessary. The Operational Communications Team ensures that this ability is always provisioned with minimum compromise to the Concept of Operations. The Operational Communications (OC) Team is responsible for the management, provision, and support of the mission-critical voice communications systems (currently Airwave TETRA) used by front line police officers, control room staff and partnership agencies (SL Guard Forces) deployed nationally across the nuclear licensed sites where Civil Nuclear Constabulary (CNC) has a presence. This includes ensuring the security of the assets, contract and service management, interoperability with other emergency services, Special Forces, and other agencies. The team must prepare for ESN, whilst delivering an effective BAU service capability and an increasing requirement to inform and deliver Operational Communications work streams or projects within the CNC's Project Portfolio and Ambition work - the most significant being ESN , Airwave's replacement. Provide technical and subject matter expertise and promote emerging technologies which can support or enhance both current and future operational communications with the CNC. Job Purpose: Plan, implement and deliver specific work streams/projects in support of the Operational Communications Strategy and Constabulary initiatives, within both the Business as Usual and Change (Projects) arenas. Specific responsibility for resolving faults and issues relating to devices fitted within vehicles or fixed positions and site-specific and specialist Ops Comms kit and equipment. Provide an intelligent delivery function and additional resilience in support of the activities of the team. Employ and develop best practices such as; ITIL, Lean Six Sigma and Prince 2 and use these to engage in and drive OC workstreams and projects to a successful conclusion Technical/Specialist: Demonstrate an understanding of both the technical and contextual issues and effectively articulate the issue/requirements/outcomes etc. Develop and maintain a comprehensive understanding of the OC team's functional areas to provided resilience as necessary, to include but not limited to; the break/fix process and helpdesk monitoring, auditing and reprogramming and other specialist activities. Provide relevant and timely responses to issues arising and contribute to effective resolutions developed by the team, which could include site visits to the Operational Units. Provide tactical and operational advice and guidance as appropriate, translating technical concepts to suit a non-technical audience. Maintain and develop technical knowledge of Airwave and Operational Communications issues, best practice and standards. Develop and maintain a knowledge of ESN - the Emergency Services Network which will replace Airwave within the next 5 years. Knowledge & Skills Required: Hold a vocational qualification/ work experience in Radio Engineer or related technical discipline. Experience of operating in teams with cross-functional stakeholders Demonstrable experience of effective planning, production of documentation, impact assessments and change control. Demonstrable experience of installing, integrating and maintaining of technical radio or communications systems in a service role. Understand the project lifecycle and the use of methodologies such as; Prince 2, ITIL and Lean Six Sigma and the ability to effectively apply them. Experience of capturing and effectively communicating issues, risks, impacts, requirements and outcomes. Ability to organise own workload, set priorities and deadlines, proactive attitude and able to flex with competing priorities. Apply Now: If you have the skills and experience required for this role, we encourage you to apply. Should your CV be shortlisted, an Adecco Consultant will contact you to discuss progressing your application to the Force. Important Eligibility Information: Due to Police recruitment criteria, applicants must have lived continuously in the UK for the past five years. Unfortunately, applications that do not meet this requirement cannot be considered. Please note that any job offer made by the Force will be subject to Police Vetting procedures. Adecco acts as an employment agency for permanent recruitment and an employment business for the supply of temporary workers. The Adecco Group UK & Ireland is an Equal Opportunities Employer. By applying for this role your details will be submitted to Adecco. Our Candidate Privacy Information Statement explains how we will use your information - please copy and paste the following link in to your browser (url removed)
Recruit4staff are representing a leading steel fabrication business in their search for a Machine Operator to work in Mold Job Details: Pay: £12.50 - £14.00 per hour Hours of Work: Monday to Friday, 6:00 AM - 2:00 PM OR Afternoon Shift: Monday to Thursday, 2:00 PM - 12:00 AM Duration: Temp to Perm Benefits: Potential for long-term employment, clean working environment, and shift options to suit work-life balance. Job Role: As a Machine Operator , you will be setting up and operating a variety of machinery, including some CNC equipment, following detailed work instructions. Your duties will involve using hand and power tools, sanding or grinding components to remove splatter, and carrying out quality checks on finished products. Adhering to health & safety, quality assurance, and manual handling procedures is essential for this Machine Operator position. Essential Skills, Experience, or Qualifications: Experience working in a manufacturing or engineering environment Skilled in operating engineering machinery Advantageous Skills, Experience, or Qualifications Previous CNC machine operation experience Mechanical assembly background Familiarity with hand tools and grinding/sanding tasks Additional Information Clean, organised production facility Training provided on company-specific processes Commutable From: Wrexham, Chester, Wirral, Mold, Deeside Similar Job Titles: Quality Inspector, Mechanical Assembler, Machine Technician For further information about this and other positions please apply now. This vacancy is being advertised on behalf of Recruit4staff who are operating as a recruitment agency, agent, agencies, employment agency or employment business.
Oct 02, 2025
Seasonal
Recruit4staff are representing a leading steel fabrication business in their search for a Machine Operator to work in Mold Job Details: Pay: £12.50 - £14.00 per hour Hours of Work: Monday to Friday, 6:00 AM - 2:00 PM OR Afternoon Shift: Monday to Thursday, 2:00 PM - 12:00 AM Duration: Temp to Perm Benefits: Potential for long-term employment, clean working environment, and shift options to suit work-life balance. Job Role: As a Machine Operator , you will be setting up and operating a variety of machinery, including some CNC equipment, following detailed work instructions. Your duties will involve using hand and power tools, sanding or grinding components to remove splatter, and carrying out quality checks on finished products. Adhering to health & safety, quality assurance, and manual handling procedures is essential for this Machine Operator position. Essential Skills, Experience, or Qualifications: Experience working in a manufacturing or engineering environment Skilled in operating engineering machinery Advantageous Skills, Experience, or Qualifications Previous CNC machine operation experience Mechanical assembly background Familiarity with hand tools and grinding/sanding tasks Additional Information Clean, organised production facility Training provided on company-specific processes Commutable From: Wrexham, Chester, Wirral, Mold, Deeside Similar Job Titles: Quality Inspector, Mechanical Assembler, Machine Technician For further information about this and other positions please apply now. This vacancy is being advertised on behalf of Recruit4staff who are operating as a recruitment agency, agent, agencies, employment agency or employment business.
Job Description Job Title: NB&C - NPI - CNC Machinist - Infinity Park Derby Working Pattern: Day Working (Role will require shift working as development progress) Working location: Infinity Park Derby An exciting opportunity has arisen for a CNC Machinist at our Submarines as part of a Dedicated New Product Introduction Facility at Infinity Park Derby. The Role of New Product Introduction is fundamental to enabling Rolls Royce Submarines exceed its current challenge of delivering the next generation of technology for the Royal Navy Submarine Service. This role has a clear line of sight from Machine through keeping the nation safe by giving the Royal Navy what it needs when it needs it! Why Rolls-Royce? Rolls-Royce is one of the most enduring and iconic brands in the world and has been at the forefront of innovation for over a century. We design, build and service systems that provide critical power to customers where safety and reliability are paramount. We are proud to be a force for progress, powering, protecting and connecting people everywhere. We want to ensure that the excellence and ingenuity that has shaped our history continues into our future and we need people like you to come and join us on this journey. We'll provide an environment of caring and belonging where you can be yourself. An inclusive, innovative culture that invests in you, gives you access to an incredible breadth and depth of opportunities where you can grow your career and make a difference. What we offer: We offer excellent development opportunities, a competitive salary, and exceptional benefits. These include bonus, employee support assistance and employee discounts. What you will be doing: Multi Skilled Manufacturing Machinist- Machining (Turning / Milling/EDM) Machine components to the method as defined in the Technical Instructions and ensuring compliance against the documented method of manufacture. Training to operate different machine/equipment is managed via the 5 Step Pack. Required to work as part of an integrated team to achieve cell targets and focus on continuous improvement across the products and processes. Operate, maintain, and optimise advanced machining equipment to ensure the highest standards of quality, safety, and efficiency, in addition you will: Set up, operate, and monitor CNC machining equipment. These will include WFL, Hermle and Sodic platforms with Siemens controls. Undertake on machine programming. Interpret engineering drawings, technical specifications and working instructions to produce components to exact tolerances. Perform in-process inspections using precision measuring equipment (micrometres, callipers, CMM's and gauges) to ensure compliance with Rolls-Royce quality standards. Identify and help implement improvements to machining processes whilst collaborating with RR Manufacturing Engineers to enhance productivity, reduce waste and improve component quality in order to drive improvement as out current capability will not be enough to meet this challenge. Collaborate with engineering, machine maintenance teams and team leaders to troubleshoot and resolve technical issues during production. Be vigilant and highlight any concerns with product, material and measurement equipment which may affect customer quality or safety standards. Adhere to Rolls-Royce quality standards and industry regulations. Document production data, inspection results and non-conformances accurately, prioritising product safety. Follow all health, safety, and environmental policies to maintain a safe working environment. Work closely with cross-functional teams, including manufacturing engineers, quality engineers, production staff, team leaders and production managers to achieve production targets and solve problems. HS&E Responsible for applying the appropriate Health and Safety practices and maintaining a safe environment at all times. Perform operations in a safe manner complying with all HS&E requirements Keeps work area safe, tidy and clean Follows all fire, conventional HS&E and where applicable the Nuclear licensed site conditions, procedures and regulations Identify and report any matter that indicates that the safety of an operation or the safe condition of any plant may be affected PRODUCT SAFETY Responsible for delivering a defined set of tasks, complying with procedures to apply established methods to plan. Understand and interpret manufacturing engineering drawings, technical instructions and written specifications. Can safely deal with any problems / discrepancies while following the correct procedures. Makes decisions and provides suitable justification for those decisions and conclusions. QUALITY Ensures that the completed tasks for components meets the quality standards & drawing requirements and that the relevant paperwork & documentation is completed in full. Deliver right first time quality for each operation Comply with the procedures for control of non-conformance for their area Works in an integrated team to effectively resolve quality issues COST Works within the team to drive productivity and achieve the cell financial targets. Aware of consumable costs and supports in the reduction of waste. DELIVERY Works closely with manufacturing engineering on design and manufacturability problems to quickly resolve issues Understands cell performance metrics and be involved with improvement activities to enable improved performance in cell Supports activities to enable on time delivery to the customer and is flexible to perform other duties when assigned PEOPLE Supports with or provides on the job training and technical support to other team members as required. Be engaged when receiving communications from cell and business leaders. Understand any knowledge & skill gaps and be proactive in addressing these through the relevant training and development pathways to become a Suitably Qualified Experienced Person (SQEP). Where applicable ensure qualifications that require external bodies to certify (eg PCN, CSWIP) or a validation from internal authority (eg eye tests) are kept upto date. ASSET MANAGEMENT Ensures that any equipment and measuring tools, used when performing tasks, are in calibration Ensures equipment is fit for purpose both before and after use Ensure all breakdowns are reported appropriately Who we're looking for: At Rolls-Royce we put safety first, do the right thing, keep it simple and make a difference. These principles form the behaviours that guide us and are an essential component of our assessment process. They are the fundamental qualities that we seek for all roles. Has developed proficient knowledge and understanding of differing machine centres, a range of practical methods, techniques and work processes, gained through a recognised time served apprenticeship. Experience of operating WFL M80 or Hermle C52 machines is beneficial Experience of operating Programmable Logic Controllers (PLCs) for CNC machines is beneficial. Awareness of HS&E requirements, including risk assessment processes. An awareness of the importance of sustaining and contributing to a strong safety culture. Manage a number of tasks simultaneously, following guidance from the Production Leader. Demonstrate the ability to get things done in an ever changing environment. Display confident communication skills and experience of team working. Project a positive 'can do' attitude to deliver on objectives and commitments. Be flexible and willing to multi skill with a desire to grow, learn and develop new skills. Somone to become a development part/Asset lead from a technician level to read across to fellow technicians To work hand in hand with CAE drive a robust process. We are an equal opportunities employer. We're committed to developing a diverse workforce and an inclusive working environment. We believe that people from different backgrounds and cultures give us different perspectives which are crucial to innovation and problem solving. We believe the more diverse perspectives we have, the more successful we'll be. By building a culture of caring and belonging, we give everyone who works here the opportunity to realise their full potential. You can learn more about our global Inclusion strategy at Our people Rolls-Royce To work for the Rolls-Royce Submarines business an individual has to hold a Security Check clearance. Rolls-Royce will support the application for Security Clearance if you do not currently already have this in place. Due to the nature of work the business conducts and the protection of certain assets we can only progress applications from individuals who are a UK national or, in MoD approved cases, a dual national. Job Category Manufacturing Posting Date 26 Sept 2025; 00:09 Posting End Date 24 Oct 2025PandoLogic.
Oct 01, 2025
Full time
Job Description Job Title: NB&C - NPI - CNC Machinist - Infinity Park Derby Working Pattern: Day Working (Role will require shift working as development progress) Working location: Infinity Park Derby An exciting opportunity has arisen for a CNC Machinist at our Submarines as part of a Dedicated New Product Introduction Facility at Infinity Park Derby. The Role of New Product Introduction is fundamental to enabling Rolls Royce Submarines exceed its current challenge of delivering the next generation of technology for the Royal Navy Submarine Service. This role has a clear line of sight from Machine through keeping the nation safe by giving the Royal Navy what it needs when it needs it! Why Rolls-Royce? Rolls-Royce is one of the most enduring and iconic brands in the world and has been at the forefront of innovation for over a century. We design, build and service systems that provide critical power to customers where safety and reliability are paramount. We are proud to be a force for progress, powering, protecting and connecting people everywhere. We want to ensure that the excellence and ingenuity that has shaped our history continues into our future and we need people like you to come and join us on this journey. We'll provide an environment of caring and belonging where you can be yourself. An inclusive, innovative culture that invests in you, gives you access to an incredible breadth and depth of opportunities where you can grow your career and make a difference. What we offer: We offer excellent development opportunities, a competitive salary, and exceptional benefits. These include bonus, employee support assistance and employee discounts. What you will be doing: Multi Skilled Manufacturing Machinist- Machining (Turning / Milling/EDM) Machine components to the method as defined in the Technical Instructions and ensuring compliance against the documented method of manufacture. Training to operate different machine/equipment is managed via the 5 Step Pack. Required to work as part of an integrated team to achieve cell targets and focus on continuous improvement across the products and processes. Operate, maintain, and optimise advanced machining equipment to ensure the highest standards of quality, safety, and efficiency, in addition you will: Set up, operate, and monitor CNC machining equipment. These will include WFL, Hermle and Sodic platforms with Siemens controls. Undertake on machine programming. Interpret engineering drawings, technical specifications and working instructions to produce components to exact tolerances. Perform in-process inspections using precision measuring equipment (micrometres, callipers, CMM's and gauges) to ensure compliance with Rolls-Royce quality standards. Identify and help implement improvements to machining processes whilst collaborating with RR Manufacturing Engineers to enhance productivity, reduce waste and improve component quality in order to drive improvement as out current capability will not be enough to meet this challenge. Collaborate with engineering, machine maintenance teams and team leaders to troubleshoot and resolve technical issues during production. Be vigilant and highlight any concerns with product, material and measurement equipment which may affect customer quality or safety standards. Adhere to Rolls-Royce quality standards and industry regulations. Document production data, inspection results and non-conformances accurately, prioritising product safety. Follow all health, safety, and environmental policies to maintain a safe working environment. Work closely with cross-functional teams, including manufacturing engineers, quality engineers, production staff, team leaders and production managers to achieve production targets and solve problems. HS&E Responsible for applying the appropriate Health and Safety practices and maintaining a safe environment at all times. Perform operations in a safe manner complying with all HS&E requirements Keeps work area safe, tidy and clean Follows all fire, conventional HS&E and where applicable the Nuclear licensed site conditions, procedures and regulations Identify and report any matter that indicates that the safety of an operation or the safe condition of any plant may be affected PRODUCT SAFETY Responsible for delivering a defined set of tasks, complying with procedures to apply established methods to plan. Understand and interpret manufacturing engineering drawings, technical instructions and written specifications. Can safely deal with any problems / discrepancies while following the correct procedures. Makes decisions and provides suitable justification for those decisions and conclusions. QUALITY Ensures that the completed tasks for components meets the quality standards & drawing requirements and that the relevant paperwork & documentation is completed in full. Deliver right first time quality for each operation Comply with the procedures for control of non-conformance for their area Works in an integrated team to effectively resolve quality issues COST Works within the team to drive productivity and achieve the cell financial targets. Aware of consumable costs and supports in the reduction of waste. DELIVERY Works closely with manufacturing engineering on design and manufacturability problems to quickly resolve issues Understands cell performance metrics and be involved with improvement activities to enable improved performance in cell Supports activities to enable on time delivery to the customer and is flexible to perform other duties when assigned PEOPLE Supports with or provides on the job training and technical support to other team members as required. Be engaged when receiving communications from cell and business leaders. Understand any knowledge & skill gaps and be proactive in addressing these through the relevant training and development pathways to become a Suitably Qualified Experienced Person (SQEP). Where applicable ensure qualifications that require external bodies to certify (eg PCN, CSWIP) or a validation from internal authority (eg eye tests) are kept upto date. ASSET MANAGEMENT Ensures that any equipment and measuring tools, used when performing tasks, are in calibration Ensures equipment is fit for purpose both before and after use Ensure all breakdowns are reported appropriately Who we're looking for: At Rolls-Royce we put safety first, do the right thing, keep it simple and make a difference. These principles form the behaviours that guide us and are an essential component of our assessment process. They are the fundamental qualities that we seek for all roles. Has developed proficient knowledge and understanding of differing machine centres, a range of practical methods, techniques and work processes, gained through a recognised time served apprenticeship. Experience of operating WFL M80 or Hermle C52 machines is beneficial Experience of operating Programmable Logic Controllers (PLCs) for CNC machines is beneficial. Awareness of HS&E requirements, including risk assessment processes. An awareness of the importance of sustaining and contributing to a strong safety culture. Manage a number of tasks simultaneously, following guidance from the Production Leader. Demonstrate the ability to get things done in an ever changing environment. Display confident communication skills and experience of team working. Project a positive 'can do' attitude to deliver on objectives and commitments. Be flexible and willing to multi skill with a desire to grow, learn and develop new skills. Somone to become a development part/Asset lead from a technician level to read across to fellow technicians To work hand in hand with CAE drive a robust process. We are an equal opportunities employer. We're committed to developing a diverse workforce and an inclusive working environment. We believe that people from different backgrounds and cultures give us different perspectives which are crucial to innovation and problem solving. We believe the more diverse perspectives we have, the more successful we'll be. By building a culture of caring and belonging, we give everyone who works here the opportunity to realise their full potential. You can learn more about our global Inclusion strategy at Our people Rolls-Royce To work for the Rolls-Royce Submarines business an individual has to hold a Security Check clearance. Rolls-Royce will support the application for Security Clearance if you do not currently already have this in place. Due to the nature of work the business conducts and the protection of certain assets we can only progress applications from individuals who are a UK national or, in MoD approved cases, a dual national. Job Category Manufacturing Posting Date 26 Sept 2025; 00:09 Posting End Date 24 Oct 2025PandoLogic.
Looking for a hands-on part-time engineering role with variety, flexibility, and great benefits? Join Weald Electronics in Slinfold as a Mechanical Engineer / QC Inspector today! Mechanical EngineerSlinfold, West Sussex 23 - 24.75 hours per week over three days £14 - £14.75 per hour Permanent contract Please Note: Applicants must be authorised to work in the UK Weald Electronics Ltd, part of The Lodge Group, is a trusted manufacturer of high-performance connectors and electro-mechanical assemblies. Known for quality, innovation, and reliability, we support industries where precision is critical. With a supportive culture and opportunities to grow, this is an exciting time to join our dedicated team. The Role We're looking for a skilled Mechanical Engineer / QC Inspector to support our Production, Engineering, and Quality departments. The role is varied, offering plenty of hands-on tasks while also playing a vital role in inspection and quality assurance. Key Responsibilities: Maintain and repair assembly jigs and small tools Manufacture and adapt simple tooling for production Carry out small batch modifications using lathes, drills, milling machines, and hand tools Prototype new parts for testing and evaluation Support the QA department with timely and accurate inspection of sub-assemblies and incoming goods Record inspection results and complete non-conformance reports when required Provide feedback to the Quality Manager to support continuous improvement Operate at all times to company's quality and health & safety standards Benefits: Competitive hourly rate: £14.00 - £14.75 (depending on experience) Contributory pension scheme 23 days holiday + bank holidays (pro rata) Holiday entitlement increases with service (up to 25 days) Paid Christmas closure 2x discretionary annual bonuses (June & December) Employee assistance programme with 24/7 helpline, wellbeing app & discounts Free onsite parking The Ideal Candidate We're looking for a practical engineer with a strong mechanical background and a proactive, adaptable approach. You'll be someone who takes pride in accuracy and can balance both production and quality tasks. About you: Due to the location of this role, applicants must have a valid driving licence and access to their own vehicle Able to interpret technical drawings Previous hands-on experience in machining, toolmaking, or precision engineering Skilled in the use of lathes, drills, mills, and other workshop tools Familiar with mechanical and optical measuring equipment High attention to detail and accuracy Flexible, adaptable, and keen to learn new skills Basic IT skills This is a fantastic opportunity to join a stable, friendly company where you'll receive a full handover before the current post-holder retires. How to apply for the role: If you have the skills and experience required for this position, click "apply" today and check your inbox for an email providing more information on how to complete your application and provide any other supporting documents. You must be authorised to work in the UK. No agencies please. Other suitable skills and experience include Mechanical Technician, Quality Inspector, Toolmaker, Maintenance Engineer, Machinist, CNC Operator, Production Engineer, Mechanical Assembler, Quality Engineer, Fitter/Turner
Sep 26, 2025
Full time
Looking for a hands-on part-time engineering role with variety, flexibility, and great benefits? Join Weald Electronics in Slinfold as a Mechanical Engineer / QC Inspector today! Mechanical EngineerSlinfold, West Sussex 23 - 24.75 hours per week over three days £14 - £14.75 per hour Permanent contract Please Note: Applicants must be authorised to work in the UK Weald Electronics Ltd, part of The Lodge Group, is a trusted manufacturer of high-performance connectors and electro-mechanical assemblies. Known for quality, innovation, and reliability, we support industries where precision is critical. With a supportive culture and opportunities to grow, this is an exciting time to join our dedicated team. The Role We're looking for a skilled Mechanical Engineer / QC Inspector to support our Production, Engineering, and Quality departments. The role is varied, offering plenty of hands-on tasks while also playing a vital role in inspection and quality assurance. Key Responsibilities: Maintain and repair assembly jigs and small tools Manufacture and adapt simple tooling for production Carry out small batch modifications using lathes, drills, milling machines, and hand tools Prototype new parts for testing and evaluation Support the QA department with timely and accurate inspection of sub-assemblies and incoming goods Record inspection results and complete non-conformance reports when required Provide feedback to the Quality Manager to support continuous improvement Operate at all times to company's quality and health & safety standards Benefits: Competitive hourly rate: £14.00 - £14.75 (depending on experience) Contributory pension scheme 23 days holiday + bank holidays (pro rata) Holiday entitlement increases with service (up to 25 days) Paid Christmas closure 2x discretionary annual bonuses (June & December) Employee assistance programme with 24/7 helpline, wellbeing app & discounts Free onsite parking The Ideal Candidate We're looking for a practical engineer with a strong mechanical background and a proactive, adaptable approach. You'll be someone who takes pride in accuracy and can balance both production and quality tasks. About you: Due to the location of this role, applicants must have a valid driving licence and access to their own vehicle Able to interpret technical drawings Previous hands-on experience in machining, toolmaking, or precision engineering Skilled in the use of lathes, drills, mills, and other workshop tools Familiar with mechanical and optical measuring equipment High attention to detail and accuracy Flexible, adaptable, and keen to learn new skills Basic IT skills This is a fantastic opportunity to join a stable, friendly company where you'll receive a full handover before the current post-holder retires. How to apply for the role: If you have the skills and experience required for this position, click "apply" today and check your inbox for an email providing more information on how to complete your application and provide any other supporting documents. You must be authorised to work in the UK. No agencies please. Other suitable skills and experience include Mechanical Technician, Quality Inspector, Toolmaker, Maintenance Engineer, Machinist, CNC Operator, Production Engineer, Mechanical Assembler, Quality Engineer, Fitter/Turner
Toolroom Technician Location: Huddersfield Hours: Rotating Shifts (6 AM - 2 PM / 2 PM - 10 PM, Monday to Friday) Salary: 40K per annum Join the Team as a Toolroom Technician! Are you a skilled technician with a passion for precision and problem-solving? Major Recruitment's Technical Division is excited to partner with a forward-thinking manufacturing client in Huddersfield. We're looking for a Toolroom Technician to keep production running smoothly, tackle challenges head-on, and contribute to the company's ongoing success. If you're ready to make your mark in a collaborative and innovation-driven environment, this role is for you! Your Role at a Glance: As a Toolroom Technician , you'll play a critical role in ensuring tools and equipment are maintained to perfection. You'll support production teams to deliver high-quality products efficiently and safely, while also driving improvements that help the business thrive. What You'll Do: Maintain and service tools and production equipment to ensure peak performance. Identify and resolve tooling issues in collaboration with your team. Contribute to improvement initiatives that boost efficiency and effectiveness. Promote a safe working environment and good manufacturing practices. Enhance change-over processes by working closely with production teams. What You'll Need: Essential Skills: Knowledge of safety and quality standards. Expertise in maintaining tooling and production equipment. Hands-on experience with lathes, milling machines, surface grinders, and workshop tools. Familiarity with CNC milling and turning, especially XYZ machines. Experience with power press and metal forming equipment. Ability to work independently and as part of a team. Desirable Skills: Experience in maintaining press tools, rolling tools, and forming tools. Willingness to participate in health and safety initiatives. Qualifications: Preferred but not essential - NVQ Level 3 in Mechanical Engineering or equivalent Abrasive wheel training. Why Join Us? Challenge Yourself: Work on diverse equipment in a dynamic manufacturing environment. Make an Impact: Be a key player in improving processes and driving success. Collaborative Culture: Join a supportive team that values your skills and ideas. Growth Opportunities: Take part in improvement activities that hone your expertise. Ready to Take the Next Step? Don't wait-apply online today! If you're passionate about precision and ready to make a difference, we'd love to hear from you. HMIND
Sep 23, 2025
Full time
Toolroom Technician Location: Huddersfield Hours: Rotating Shifts (6 AM - 2 PM / 2 PM - 10 PM, Monday to Friday) Salary: 40K per annum Join the Team as a Toolroom Technician! Are you a skilled technician with a passion for precision and problem-solving? Major Recruitment's Technical Division is excited to partner with a forward-thinking manufacturing client in Huddersfield. We're looking for a Toolroom Technician to keep production running smoothly, tackle challenges head-on, and contribute to the company's ongoing success. If you're ready to make your mark in a collaborative and innovation-driven environment, this role is for you! Your Role at a Glance: As a Toolroom Technician , you'll play a critical role in ensuring tools and equipment are maintained to perfection. You'll support production teams to deliver high-quality products efficiently and safely, while also driving improvements that help the business thrive. What You'll Do: Maintain and service tools and production equipment to ensure peak performance. Identify and resolve tooling issues in collaboration with your team. Contribute to improvement initiatives that boost efficiency and effectiveness. Promote a safe working environment and good manufacturing practices. Enhance change-over processes by working closely with production teams. What You'll Need: Essential Skills: Knowledge of safety and quality standards. Expertise in maintaining tooling and production equipment. Hands-on experience with lathes, milling machines, surface grinders, and workshop tools. Familiarity with CNC milling and turning, especially XYZ machines. Experience with power press and metal forming equipment. Ability to work independently and as part of a team. Desirable Skills: Experience in maintaining press tools, rolling tools, and forming tools. Willingness to participate in health and safety initiatives. Qualifications: Preferred but not essential - NVQ Level 3 in Mechanical Engineering or equivalent Abrasive wheel training. Why Join Us? Challenge Yourself: Work on diverse equipment in a dynamic manufacturing environment. Make an Impact: Be a key player in improving processes and driving success. Collaborative Culture: Join a supportive team that values your skills and ideas. Growth Opportunities: Take part in improvement activities that hone your expertise. Ready to Take the Next Step? Don't wait-apply online today! If you're passionate about precision and ready to make a difference, we'd love to hear from you. HMIND
Role: CNC Setter Operator Location: Cheltenham £36,434 Monday to Thursday 02:00 pm to 11:30 pm Benefits: 27 paid days holiday, Staff canteen, Free Parking, Free tea & Coffee This market leading engineering company are recruiting for CNC Setter Operators to set and operate CNC Lathes at their site in Cheltenham. The company manufacture and supply a range of specialist products to various industries across the globe. Main duties & responsibilities: Setting computer numerically controlled (CNC) lathes Producing parts to drawing, deburring, cleaning and packaging to set procedures Ensuring excellent quality through the inspection of parts using measuring equipment such as gauges, verniers and micrometers. Working to Standard Operating Procedures (SOPs), production rates, workplace organisation, front line operator asset care (FLOAC), maintenance and cleanliness of machine equipment. Understanding and complying with Company Environmental, Health and Safety (EHS) practices, identifying areas for improvement and supporting related initiatives Engaging, suggesting and contribution to continuous improvement initiatives and projects as required Skills / Experience: Basic CNC setting and operating experience Experience with sliding head/star (beneficial) Basic experience with measuring equipment Working within a production/engineering environment For further details, please contact Nick Sollis (phone number removed) or email your cv (url removed) Omega Resource Group are an employment agency specialising in opportunities at all levels within the Engineering, Aerospace, Automotive, Electronics, Defence, Scientific, Oil & Gas, Construction and Manufacturing sectors. We are always seeking Engineering Staff, Senior Managers, Skilled and Semi-Skilled Machinists, Mechanical Fitters, Electrical Fitters, Quality Engineers, Materials Science Engineers, Maintenance Engineers, Electronics Engineers, Test Technicians, Technical Authors and Laboratory Technicians to name but a few. Omega is an employment agency specialising in opportunities at all levels within the Engineering, Manufacturing, Aerospace, Automotive, Electronics, Defence, Scientific, Energy & Renewables and Tech sectors.
Sep 22, 2025
Full time
Role: CNC Setter Operator Location: Cheltenham £36,434 Monday to Thursday 02:00 pm to 11:30 pm Benefits: 27 paid days holiday, Staff canteen, Free Parking, Free tea & Coffee This market leading engineering company are recruiting for CNC Setter Operators to set and operate CNC Lathes at their site in Cheltenham. The company manufacture and supply a range of specialist products to various industries across the globe. Main duties & responsibilities: Setting computer numerically controlled (CNC) lathes Producing parts to drawing, deburring, cleaning and packaging to set procedures Ensuring excellent quality through the inspection of parts using measuring equipment such as gauges, verniers and micrometers. Working to Standard Operating Procedures (SOPs), production rates, workplace organisation, front line operator asset care (FLOAC), maintenance and cleanliness of machine equipment. Understanding and complying with Company Environmental, Health and Safety (EHS) practices, identifying areas for improvement and supporting related initiatives Engaging, suggesting and contribution to continuous improvement initiatives and projects as required Skills / Experience: Basic CNC setting and operating experience Experience with sliding head/star (beneficial) Basic experience with measuring equipment Working within a production/engineering environment For further details, please contact Nick Sollis (phone number removed) or email your cv (url removed) Omega Resource Group are an employment agency specialising in opportunities at all levels within the Engineering, Aerospace, Automotive, Electronics, Defence, Scientific, Oil & Gas, Construction and Manufacturing sectors. We are always seeking Engineering Staff, Senior Managers, Skilled and Semi-Skilled Machinists, Mechanical Fitters, Electrical Fitters, Quality Engineers, Materials Science Engineers, Maintenance Engineers, Electronics Engineers, Test Technicians, Technical Authors and Laboratory Technicians to name but a few. Omega is an employment agency specialising in opportunities at all levels within the Engineering, Manufacturing, Aerospace, Automotive, Electronics, Defence, Scientific, Energy & Renewables and Tech sectors.
