114 jobs found

MTrec's new career opportunity Our client are specialists in their industry sector. They are looking for a Multi Skilled Maintenance Technician to join their team working day shift. The role will initially be temporary for 3 months however if you perform well in this 12 week period you will be made permanent. The job you'll do Recruiting a multi skilled maintenance technician within our engineering department, the successful candidate will maintain plant and equipment, install new equipment and be part of a team. Work with single phase supplies. Working with hydraulics, actuators and valves. To identify root causes wherever possible and to communicate with relevant personnel. Working with Mitsubishi and Siemens PLC controls. To work effectively with colleagues and subcontractors. To perform any other duties as required by the company. About You Must have Electrical and Mechanical engineering experience. Work safely at all times observing instructions, procedures, permits, safety systems and lock offs etc. Attend calls out of hours if needed. To maintain plant and equipment both reactively (e.g. breakdowns), and proactively. To establish cause of failure in equipment and fault find. The Rewards and the Benefits Day shift role Competitive pay Company pension Free parking On-site parking

Introduction Saab UK is part of Scandinavia's largest defence company, bringing together the best of Swedish and British innovation. Saab offers world-leading solutions and services in defence, aviation, space, and civil security to keep people and society safe. Our UK presence has been growing at pace, meaning we can offer a wide range of opportunities for personal fulfilment and career growth. We currently employ over 600 people across eight sites in the UK, and our specialisations include software engineering, underwater robotics, radars, AI, and armed forces training. The Role: Following planned expansion, Saab UK is seeking a Field Support Representative to join the Programmes Team within Sensor Systems UK. The successful candidate will be trained to support the UK military's in-service radar systems in Hampshire and Yorkshire and will deploy internationally in support of the growing Giraffe 1X (G1X) radar fleet. The role involves customer-facing radar technical support across installation, maintenance, fault-finding, training, and operational deployments of radar systems in demanding environments. Key Responsibilities Planned and preventative maintenance of radar systems, including input to maintenance schedules. On-site technical support to UK military personnel operating in-service radar systems. Installation, integration, and verification of radar systems and associated subsystems. Support to software loading, configuration, and interfaces with Command and Control systems. Fault diagnosis and repair across electrical, electronic, mechanical, hydraulic, cooling, and power systems. Support to trials, exercises, and operational deployments in the UK and overseas. Training and mentoring end users in operation and basic maintenance of radar systems. Support to other business areas including customer support desks, programme delivery, and OEM activities. Reporting and administration related to projects, deployments, and training activities. Qualifications and Skill: Essential: Background or interest in radar, electronic, or other complex technical systems. Experience in a technical, customer-facing role demonstrating fault-finding in high-pressure environments. Ability and willingness to travel extensively, including overseas deployment at short notice. Medically and physically able to undertake deployment-ready training. Computer literate. Full UK driving licence. Eligible to obtain UK Security Clearance to SC level. UK or Swedish citizenship. Desirable: ONC/HNC or equivalent qualification in a relevant technical discipline. Multi-skilled with an electrical or electronic bias. Previous military experience. Experience delivering technical or instructional training. Experience of working on engines and/or motor vehicles, whether through previous employment or as a hobby. As a National Security Vetting clearance is required for this role, applicants will be required to hold National Security Vetting clearance to SC level or have the ability to gain it. By submitting an application to Saab UK you consent to undertaking workforce screening activities that may include but are not limited to: Baseline Personnel Security checks, National Security Vetting, reference checks, verification of working rights and in all circumstances preferred candidates will be placed through a security interview.

Electrical & Instrumentation Technician North East + Benefits COMAH Industrial Environment Our client is looking to recruit an experienced Electrical & Instrumentation (E&I) Technician to join a well-established industrial operation in the North East. This is an excellent opportunity to work within a highly regulated COMAH environment, offering long-term stability, strong safety culture, and ongoing training and development. The role would suit someone with solid hands-on experience in electrical and instrumentation maintenance, ideally within hazardous or heavy industrial environments. CompEx and 18th Edition qualifications are highly desirable, but candidates with relevant experience in similar sectors will also be considered. Responsibilities: Carry out maintenance, calibration, testing, and repair of electrical and instrumentation equipment Diagnose faults and ensure timely resolution to maintain plant performance and availability Complete all work in line with legal requirements and company health, safety, environmental, and quality standards Use CMMS systems to manage and record maintenance activities Install, inspect, and maintain plant equipment to a high standard and within required timescales Identify and report defects, alarms, and unsafe conditions, ensuring appropriate isolation where required Follow permit-to-work and change management procedures (MOC) Support shutdown planning and maintenance activities Contribute to continuous improvement by identifying opportunities to enhance plant performance and reliability Provide guidance or basic training to colleagues where required Support the wider engineering team with additional tasks in line with competency (e.g. basic mechanical work) Requirements: As an E&I Technician, you will be responsible for carrying out both reactive and planned maintenance across a wide range of electrical and instrumentation systems to ensure safe and efficient plant operation. Experience within a COMAH environment is advantageous, however candidates from other high-hazard industries such as oil & gas, power generation, pharmaceuticals, or manufacturing will also be considered. Therefore, to be successful you should be competent in the following: Strong experience in electrical and instrumentation maintenance within an industrial environment Knowledge of COMAH regulations and associated safety standards CompEx certification (preferred) 18th Edition Wiring Regulations (desirable) Experience with PLCs, control systems, or instrumentation software is advantageous Ability to interpret technical data and resolve complex plant issues Strong understanding of permit-to-work systems and safe isolation procedures What you ll bring: Strong fault-finding and problem-solving skills A proactive and safety-first approach Ability to work independently and as part of a team Experience working in a regulated industrial environment Good communication and reporting skills Benefits: Competitive salary Pension scheme Healthcare Overtime opportunities Ongoing training and development Long-term career stability within a high-performing engineering environment

Your new company A global leader in industrial technology and automation, this organisation designs and manufactures advanced drive and control solutions used worldwide. Based at an award-winning manufacturing site in Congleton, the business combines engineering excellence with a strong focus on innovation, digitisation, and continuous improvement. You'll be part of a collaborative, forward-thinking environment where engineering best practice is shared globally. Your new role As a Test Engineer within a high-performance manufacturing environment, you'll take ownership of delivering robust, scalable test solutions across a variable speed drives portfolio. The role blends hands-on engineering with continuous improvement, supporting both existing production and new product introductions.You'll design, deploy, and maintain PCB- and product-level test systems, ensuring reliability, efficiency, and compliance. Working closely with manufacturing, quality, and global engineering teams, you'll analyse machine data, troubleshoot issues, and drive capability improvements. You'll also play a key role in mentoring technicians and colleagues on test engineering principles.This role suits engineers from electronics, test, automation, manufacturing, or electrical engineering backgrounds who enjoy problem-solving in a fast-paced, technology-led environment. What you'll need to succeed Essential: Electrical and Electronic Engineering Qualification, e.g NVQ Level 3, HNC, Degree (or equivalent experience) Hands-on experience with automated and/or manual test systems in a manufacturing environment Strong problem-solving capability, including the use of statistical or data-driven methods Ability to communicate complex technical topics clearly to both technical and non-technical audiences Desirable: Exposure to programming (e.g. C/C++, graphical or low-code environments) Experience with ICT or flying-probe test platforms (e.g. Keysight, Teradyne, Takaya, SPEA) Familiarity with PLC-based control systems (TIA Portal experience advantageous) Knowledge of PUWER and practical risk assessment processes What you'll get in return Salary up to 55,000 Annual performance-related bonus Flexible working hours to support work-life balance Generous pension scheme with employer contributions of up to 10% 26 days' annual leave plus bank holidays Option to buy or sell up to 5 additional days of holiday Long-term career development within a global engineering organisation What you need to do now If you're interested in this role, click 'apply now' to forward an up-to-date copy of your CV, or call us now. If this job isn't quite right for you, but you are looking for a new position, please contact us for a confidential discussion about your career. Hays Specialist Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job you accept the T&C's, Privacy Policy and Disclaimers which can be found at (url removed)

Introduction Saab UK is part of Scandinavia's largest defence company, bringing together the best of Swedish and British innovation. Saab offers world-leading solutions and services in defence, aviation, space, and civil security to keep people and society safe. Our UK presence has been growing at pace, meaning we can offer a wide range of opportunities for personal fulfilment and career growth. We currently employ over 600 people across eight sites in the UK, and our specialisations include software engineering, underwater robotics, radars, AI, and armed forces training. What you will be part of Saab is a leading defence and security company with an enduring purpose, to help nations keep their people and society safe. Empowered by its 28,000 talented people, Saab constantly pushes the boundaries of technology to create a safer and more sustainable world. Saab designs, manufactures and maintains advanced systems in aeronautics, weapons, command and control, sensors and underwater systems. Saab is headquartered in Sweden. It has major operations all over the world and is part of the domestic defence capability of several nations. The Role: Following planned expansion, Saab is looking to recruit a customer-focused field support technician responsible for the service, installation, repair, and general maintenance of the Giraffe 1X multi-mission radar, as well as other radars in Saab's portfolio. This is an important role, and will require building relationships with the in-country operators, as well as with Saab Engineering Teams. In this position, you will work with a range of technologies including radar systems, software loading/programming, high-power components (AC and DC), electronics, hydraulics, cooling systems, and interfaces with both Saab and other Command and Control systems. The ability and willingness to travel, including internationally and to areas of very high risk will be essential for this role. The successful candidate will have the potential to progress within the business; they will also benefit from continuous training across the different sectors of the business and sensors. Key Responsibilities: Support customers on-site, both domestically and internationally in field and operational environments to enable initial radar system fielding; this includes conducting planned and preventative maintenance. Additional tasks will include manning customer support desks, training end users, and assisting with production at the original equipment manufacturer (OEM). Support to trials, exercises, deployments globally in support of military operations, and other company market growth initiatives. System integration and verification, and support to configuration management. Reporting and administering the running of projects and training events as required Qualifications and Experience: Essential: The ability to understand complex systems of systems - ideally this would be extensive knowledge of either a radar, electronic warfare, command and control, or sophisticated military electronic systems. A willingness to deploy at short notice to areas of very high risk. Ability to meet the physical requirements of, and pass the medical examinations associated with, Deployment Ready Training. Experience in a technical customer-facing environment demonstrating fault-finding and problem-solving abilities in a high-pressure environment Full UK driving licence Computer literate Able to obtain UK Security Clearance up to SC UK or Swedish citizenship Desirable: Qualified to a minimum of ONC/HNC level or equivalent in a technical area Multi-skilled electrical bias Previous military experience is highly desired to support the initial fielding of the systems with customers. Teaching/ instructional experience, including in practical scenarios, on military systems. Be a motivated and critical-thinking individual Be capable of working independently and managing their own workload Have excellent interpersonal skills Be comfortable in a complex customer-facing environment Thrive in big groups and maintain a large professional network Be perceptive, flexible, and act with integrity, always keeping Saab's best interests in mind Have a genuine interest in technology and the ability to adapt styles to suit a varied audience As a National Security Vetting clearance is required for this role, applicants will be required to hold National Security Vetting clearance to SC level or have the ability to gain it. By submitting an application to Saab UK you consent to undertaking workforce screening activities that may include but are not limited to: Baseline Personnel Security checks, National Security Vetting, reference checks, verification of working rights and in all circumstances preferred candidates will be placed through a security interview.

Field Service Engineer / Water Treatment Engineer / Service Technician required to join a leading Water Treatment solutions provider. The successful Field Service Engineer / Water Treatment Engineer / Service Technician will be responsibvle for both Electrical and Mechanical maintenance, servicing, and repair of a variety of water / watewater treatment systems such as, Reverse Osmosis systems, Demineralisation systems, Water Softening Units, Ultrafiltration systems, Electro - Deionisation units, polymer dosing systems, as well as cartridge media and other related wastewater treatment equipment. The Field Service Engineer / Water Treatment Engineer / Service Technician will ideally have an engineering background, with some electrical experience, with experience working on and around water treatment systems and related components such as pumps, motros, valves, actuators, filters, UV systems, aeration systems, flow meters and instrumentation, chemical dosing systems, control systems, and related components. Package 35,000 - 40,000 depending on experience. Company vehicle. Overtime payments. Annual Bonus 25 days + Bank Holidays. Door to Door pay Pension. Additional benefits. Field Service Engineer / Water Treatment Engineer / Service Technician Role Be responsibvle for both Electrical and Mechanical maintenance, servicing, and repair of a variety of water / watewater treatment systems such as, Reverse Osmosis systems, Demineralisation systems, Water Softening Units, Ultrafiltration systems, Electro - Deionisation units, polymer dosing systems, as well as cartridge media and other related wastewater treatment equipment. Willingness to cover the South West of the UK, remotley. Working on a range of water / wastewater treatment systems, and related products. Support Installation, calibration, maintenance and verification of systems. Liaise with various engineering departments. Field Service Engineer / Water Treatment Engineer / Service Technician Requirements Proven engineering background, with some electrical experience, with experience working on and around water treatment systems and related components such as pumps, motros, valves, actuators, filters, UV systems, aeration systems, flow meters and instrumentation, chemical dosing systems, control systems, and related components. Water treatment experience is a bonus. Knowledge of reverse osmosis, deionization, and filtration systems is preferred. Experience in field service roles such as Field Service Engineer, Service Engineer, Service Technician, or similar. A full UK driving license is essential. Willingness to travel across the Southwest region and work at various sites. Engineering qualifications are desirable but not essential.

Shift Electrical Maintenance Engineer Location: Horsham, West Sussex, United Kingdom Position Type: Full-Time - Permanent Shift Pattern: 4 on 4 off (2 days, 2 nights and 4 off) 06:30 - 18:30 & 18:30 - 06:30) Overview An excellent opportunity has arisen for an experienced Shift Electrical Maintenance Engineer to join a well-established industrial operation. The successful candidate will be responsible for ensuring high levels of plant availability through effective planned preventative maintenance, reactive maintenance, fault diagnosis, and continuous improvement initiatives. This role requires a proactive engineer with strong electrical maintenance experience in industrial, manufacturing, or automated environments, capable of maintaining high engineering, safety, and compliance standards. Key Responsibilities Carry out planned preventative maintenance and reactive breakdown repairs on plant equipment Diagnose and rectify electrical faults across motors, sensors, relays, contactors, control panels, and associated systems Conduct electrical and mechanical fault-finding on industrial machinery Support continuous improvement and engineering project work Work with control and instrumentation systems, including temperature sensors, pressure transducers, and flow meters Read and interpret electrical schematics, panel layouts, and technical drawings Troubleshoot PLC hardware faults, ideally with Siemens S7 exposure Maintain high housekeeping, health & safety, and operational compliance standards Report accidents, incidents, and near misses in accordance with company procedures Candidate Requirements HNC in Electrical / Electronic Engineering or equivalent qualification Strong experience in electrical maintenance within industrial, manufacturing, or automated environments Competence in electrical fault diagnosis and maintenance of industrial systems Experience working with MCC panels, motors, drives, and instrumentation systems PLC fault-finding experience preferred BSth Edition qualification advantageous Strong commitment to safety, reliability, and engineering best practice Guidant, Carbon60, Lorien & SRG - The Impellam Group Portfolio are acting as an Employment Business in relation to this vacancy.

We are seeking an experienced and highly capable Senior Technician & Workshop Supervisor to join our busy and growing garage. This is a hands-on leadership role combining advanced technical expertise with day-to-day workshop supervision. About the company: Our client is a well-established, independent garage with a growing reputation for quality workmanship, technical expertise, and honest customer service. Based in Wantage, the business has built a loyal customer base and continues to expand through strong word-of-mouth and repeat business. You will need : NVQ Level 3 in Vehicle Maintenance & Repair (or equivalent) Qualified MOT Tester Minimum 10 years experience in vehicle mechanics Strong diagnostic and fault-finding capability Proven experience working on a wide range of vehicles Full UK Driving Licence About you: As a Vehicle Technician you will lead on complex diagnostics and repairs, while supporting the development of junior team members and ensuring high standards of workmanship, safety, and professionalism across the workshop. The details: 1. Technical Leadership Diagnose and repair complex mechanical and electrical vehicle faults Take ownership of larger, high-value, and technically challenging jobs Ensure all work is completed efficiently, safely, and to a high standard Support quality control across all workshop outputs 2. Team Leadership & Development Mentor and support apprentices and junior technicians Act as a role model for professional conduct, work ethic, and standards Provide guidance and technical oversight to the team Assist in building a high-performance workshop culture 3. Workshop Supervision Support and deputise for the Garage Owner when required Take responsibility for workshop operations during assigned shifts Participate in rotational opening, closing, and shutdown procedures Support admin staff in management of workflow, job allocation, and productivity 4. Compliance & Standards Carry out MOT testing in line with DVSA standards Ensure adherence to health & safety regulations Maintain accurate job records and documentation Working Hours: 7.30am to 6pm Monday to Friday Salary: £35 - £42k, dependent on experience For more information and to apply, get in touch with Roxie at our Oxford branch on (phone number removed) or click 'Apply Now' to submit your application. We wish you the best of luck in your job search! If you would like to know how we will store and process your data, please visit (url removed) to read our GDPR Data Protection Statement.

Multi-Skilled Maintenance Technician Location: Middlesbrough (On-site) Shift Pattern: 4 on / 4 off An international manufacturer within the Food / FMCG sector is seeking a Multi-Skilled Maintenance Technician to join its engineering team at a high-performing production facility in Middlesbrough. This is an excellent opportunity to work within a fast-paced manufacturing environment where safety, quality, and operational efficiency are central to business success. The Role Reporting to the Engineering Manager, you will play a key role in maintaining the reliability and performance of automated production equipment. The position involves responding to plant breakdowns, delivering planned preventative maintenance (PPM), and supporting continuous improvement across the site. Key Responsibilities Respond quickly and effectively to plant breakdowns to minimise downtime Deliver planned preventative maintenance activities across production equipment Maintain high standards of health & safety, hygiene, and product integrity Ensure equipment and processes support consistent product quality Work collaboratively with production and engineering teams to maintain operational performance Support continuous improvement initiatives and drive operational efficiencies Maintain clear communication across departments to support production targets About You Electrical and/or mechanical qualification or time-served apprenticeship At least 2 years' experience working in a Food, FMCG, or automated production environment Strong fault-finding and problem-solving skills Good written and verbal communication skills Basic IT skills including Microsoft Office Desirable Skills Knowledge of PLC systems, pneumatics, hydraulics, instrumentation, and temperature control Experience working with automated production or packaging equipment Basic Food Hygiene and Health & Safety awareness Welding or fabrication experience beneficial What's on Offer Opportunity to develop your career within a large global Food / FMCG manufacturer Ongoing training and career development opportunities Competitive salary and benefits package Pension scheme Health plan Staff discount programmes Generous family leave policies

About the role We re looking for an experienced Maintenance Manager to lead the maintenance function at our large-scale AO Recycling plant in Telford, a 24/7 operational site processing fridges and other Large Domestic Appliances (LDA). This is a role with full responsibility for the safe, reliable, and efficient operation of all plant and equipment across the site. You will lead maintenance delivery across a complex, highly automated recycling facility, managing supervisors and multi-skilled technicians and driving a strong planned maintenance culture. The Site & Operation AO is one of the UK s largest recyclers of fridges and Large Domestic Appliances (LDA). The recycling facility operates 24/7 and includes: • PLC-controlled fridge recycling plant and gas recovery systems • Material handling equipment, conveyors, screens, magnetic separators, air separators, compactors and balers. • Forklift trucks, dock bays, and site infrastructure Here's What You Can Expect To Be Doing • Lead, manage, and develop maintenance supervisors and mechanical/electrical technicians. • Ensure effective shift coverage and skills availability across a 24/7 operation. • Set, measure and report clear standards of maintenance performance and safety. • Own all planned, preventive, and reactive maintenance activities. • Ensure high PPM compliance leading to reduced unplanned downtime. • Lead root cause analysis and reliability improvements. • Own and control the CMMS, including asset data, work orders, and reporting • Drive consistent CMMS use across all shifts. • Champion safe systems of work including LOTOTO and permit-to-work. • Control contractor activities and support audits and compliance A Few Things About You • Minimum 5 years experience in a maintenance leadership role within an industrial or process environment. • Experience managing maintenance in a 24/7 operation. • Proven leadership of multi-disciplinary mechanical and electrical teams. • Strong working knowledge of PLC-controlled and automated plants. • Demonstrable CMMS ownership and PPM management. • Strong health, safety, and contractor management background. Qualifications • NVQ Level 3 / Apprenticeship or equivalent in Mechanical or Electrical Engineering. • Technical certificate in a relevant discipline. (City & Guilds, B-Tech, HNC or equivalent) Benefits Our benefits are designed to cover the moments that matter to AOers. From health and wellness to giving back you ll be rewarded inside and outside of work. • Holidays; 25 days holiday • Pension; Contribute 5% of your annual salary and we'll do the same, giving you a little extra support for the future. • Be a VIP at the AO Arena; we have loads of opportunities to win free tickets and pre-sale access! • Health & wellbeing; discounted gym membership, and our scheme giving you access to virtual GP s, Mental Health support and much more. • Discounts; exclusive discounts across our product range. • Family leave; Enhanced Maternity, Paternity and Adoption leave. • Making a difference; 2 fully paid days a year to donate your time to any charity of your choice. • Free Food Thursday - Last Thursday of every month, lunch is on us as a way of saying thank you for your efforts!

Description The role of the Splash technician is to manage the technical operation and maintenance of the swimming pools systems, ensuring the water is safe, clean and healthy for users, that all equipment runs efficiently and complies with legal requirements. General Duties & Key Accountabilities Splash Maintenance & Repairs Conducts regular water tests for chemical balance (pH, chlorine etc) Adjusts chemical dosages accordingly Inspecting and maintaining plant equipment, pumps, filters, heating systems and dosing units Perform routine maintenance tasks including backwashing filters, and cleaning strainer baskets Monotors control panels, sensors and gauges to ensure equipment is working correctly, and reports where there are issues/ Ensure minimal disruption to guests and operations when completing works. Safety & Compliance Ensures compliance with all H&S and RLSS guidelines Maintain detailed and accurate records and documentation of all maintenance and repair work performed including but not limited to inspection reports and safety certification information Follow safe systems of work, risk assessments and permit-to-work procedures. Respond to emergency call-outs and support incident response when required. Operational Support Implements appropriate procedures for dealing with contaminations incidents Supports Splash team to ensure proper functioning and provide basic technical support during operations. Liaise with contractors and oversee works carried out by third parties. Ensure tools, materials and parts are available and stock levels maintained. Work collaboratively with the wider maintenance and facilities team. Guest & Team Experience Work in a professional and guest-focused manner when operating in public areas. Provide technical advice and support to resort departments. Maintain high standards of housekeeping in all work areas and plant rooms. Experience & Qualification Requirements RLSS Pool Plant Operator certificate (required) Knowledge of electrical systems within hospitality, leisure or similar environments (desirable). Strong fault-finding and problem-solving skills. Ability to work independently and prioritise workload. Good communication and teamwork skills. Flexible approach to working hours and operational demands. About Butlin's At Butlin's, we're all about fun, excitement, and adventure by the bucketload! For over 80 years we've been delighting hundreds of thousands of guests each year, whether on a non-stop action family break or our epic Adult only Big Weekenders. Ask any of our team, past and present, and one of the best things they'll say about working at Butlin's is our culture! We're all about providing our guests with an Altogether More Entertaining and Fun Break, brought to life through our three mighty values. So, if you want a role where you Create Smiles, where you aren't afraid to Get Stuck In and where the team genuinely Cares For Each Other - this could be the perfect fit for you. There has never been a more exciting time to join Butlin's!

Automation Test Engineer Location: Congleton, CW12, UK Category: Automation Engineering Bonus: 600 + annual performance bonus The Opportunity Join a global engineering and technology leader specialising in industrial automation, electrification, and digitalisation solutions. This organisation designs and manufactures advanced variable speed drives used across multiple industries worldwide. Based at an award winning UK manufacturing site, you will play a key role in delivering high quality, scalable test solutions within a fast paced, innovation led environment. The Role This position offers strong variety and would suit professionals from backgrounds such as: Electronics Test Engineer, ICT Engineer, Automation Engineer, Manufacturing Engineer, Field Service Engineer, Systems Design Engineer, or Electrical Engineer. You will take ownership of test engineering activities across production, focusing on both performance and continuous improvement. Key Responsibilities Design and implement test systems for PCB and product level testing Maintain and improve production test processes to ensure reliability and efficiency Analyse machine and test data to drive quality and capability improvements Support new product introduction and ongoing continuous improvement initiatives Collaborate with global teams to standardise and share best practice Mentor technicians and engineers on test methodologies and principles Skills and Experience Essential: Degree, HNC or HND in Electrical or Electronic Engineering or equivalent experience Experience with automated or manual test systems in a manufacturing environment Strong analytical and problem solving capability using statistical methods Clear communication skills across technical and non technical audiences Desirable: Programming knowledge in C, C++, or graphical or low code environments Experience with ICT platforms such as Keysight or Teradyne, or flying probe systems such as Takaya or SPEA Exposure to PLC based control systems, ideally using TIA Portal Understanding of PUWER regulations and risk assessment processes What's on Offer Annual performance related bonus Flexible working hours to support work life balance Pension scheme with employer contributions up to 10 percent 26 days annual leave plus bank holidays, with option to buy or sell up to 5 additional days Diversity and Inclusion The business is committed to building an inclusive workplace where diverse perspectives drive innovation. Adjustments and support are available throughout the recruitment process to ensure every candidate can perform at their best. Barker Ross Group values diversity and promotes equality. No terminology in this advert is intended to discriminate against any of the protected characteristics that fall under the Equality Act 2010. We encourage and welcome applications from all sections of society and are more than happy to discuss reasonable adjustments and/or additional arrangements as required to support your application. For the purposes of the Conduct Regulations 2003, when advertising permanent vacancies we are acting as an Employment Agency, and when advertising temporary/contract vacancies we are acting as an Employment Business.

Several exciting opportunities have arisen for Electrical and Senior Electrical Technicians to join the newly-restructured Maintenance Services team at the University of Surrey. Working as part of a team responsible for the operational maintenance of University premises, you will be undertaking planned and reactive work on electrical systems to support the University's infrastructure and environmental control systems across all our premises, ensuring that they are maintained in a safe, efficient, and functional order. The post will be required to support our current day pattern of 08.00 - 16.12 Monday to Friday. Key Responsibilities include: Maintain all electrical systems, including statutory inspection and testing where required, to meet current legislative requirements. Ensure failing plant or assets are reported to the Helpdesk and plant areas are maintained in good condition. Deliver an effective and timely response to maintenance demands across the University in a timely and cost-effective manner. Ensure compliance with all University Health and Safety and Environmental systems and procedures, and take an active part in the development of these policies Ensure the use of equipment and materials in delivery of maintenance services are appropriate and meet current legislative standards. Keep up to date with electrical related legislation and developments, attending courses to improve knowledge and passing necessary exams to maintain professional accreditation where relevant. Carry out multi-skilled tasks such as mechanical isolation and fault finding, minor carpentry, redecoration repairs linked to maintenance work. Complete all administrative work associated with departmental management systems, including the completion of work records, timesheets, stores issues, estimates and health & safety records. Utilise Building Logbook to record all maintenance visits and any relevant defective information and repairs. All defects to be reported immediately to the help desk for further action. For the senior role, you'll need good planning, organising and prioritising skills, and will be expected to tackle more complex tasks, take on additional responsibilities and communicate effectively at a senior level. The post holder may be required to support out of hours rotas as required by the SSM (Service Support Manager) to ensure operational effectiveness and business continuity. What's in it for you? We think Surrey is an amazing place to work, and we are carefully crafting a dynamic, flexible, and fun place to work and thrive. Our campus is a beautiful, leafy environment with carefully designed gardens, vibrant green playing fields, and a picturesque lake. With the buzz of student life and superb working facilities, the University of Surrey is a global community of ideas and people, dedicated to life-changing education and research in an inspiring, innovative and diverse environment. Alongside our gorgeous campus setting, collegiate on-site atmosphere and plentiful development opportunities, we also offer: 20 days holiday rising 1 day per year of service to max of 5 PLUS 8 days bank holiday / 3 Uni days at Easter / 3 Uni days at Xmas / plus 1 VC day 36 Hours per week Training in relevant areas Discount at SSP Onsite discounted childcare Cycle to work scheme Electric car lease scheme For more information or to be considered for either role, please apply via the University of Surrey Website. The University of Surrey is committed to providing an inclusive environment that offers equal opportunities for all. We place great value on diversity and are seeking to increase the diversity within our community. Therefore, we particularly encourage applications from under-represented groups, such as people from Black, Asian and minority ethnic groups and people with disabilities. Further details Job Description

Trainee Electronics Technician Permanent Position Proactive Global is hiring for Trainee Electronics Technicians to join a Leading manufacturing company based in Greenford,UB6. This is a Permanent position. Location : Greenford, UB6 Shift Timings: Mon- Friday 8:00AM - 4:30PM Salary: 29k- 31k per annum Responsibilities: Observing, learning and gaining understanding of a wide range of electronic engineering skills and processes while under the instruction of skilled technical staff. To be able to demonstrate these skills and processes as the training period progresses by working independently or with a team, to undertake tasks as instructed and increasing overall contribution to the To learn and understand the importance of Health and Safety within the To develop the skills and knowledge to construct or modify electrical and electronic equipment to an appropriate standard from both verbal instructions and drawings. To develop the skills and knowledge to be able to use a variety of electronic test To learn how to maintain workshop equipment to keep it in good To maintain and ensure general good housekeeping of the To liaise with clients both internal and external to provide technical assistance and problem To develop consistent and effective use of all available systems to support entire engineering request process. Utilise system information to effectively manage resources and priorities based on orders and repairs. Utilise Pinnacle Service Module to ensure data is accurate and up to date for all internal users and support annual stock take. To ensure the highest level of customer satisfaction through to job completion by liaising with all internal departments. Provide technical support to Operations dept and clients as required. Maintain and support the company's standards for electronic maintenance and Job specification: Willing to keep an open mind and to objectively accept constructive Display a professional attitude and good people Must be able to communicate effectively with clients and work colleagues and be able to work on own initiative. Display outstanding customer service; be willing to go the extra mile for both internal and external customers. Exhibit initiative on all client or equipment related issues and have a great sense of Be flexible in the approach to work and assignments and be able to seamlessly adapt to changing situations and priorities. Conduct assigned tasks in a controlled and safe manner, paying respect to colleagues and Be an enthusiastic and dynamic team-player, highly self-motivated and able to work on own Be proactive in gaining and maintaining technical knowledge and skills on all PV and third-party Be highly computer Interested candidates can share their cv's at (url removed) or call at (phone number removed) for further discussions. Alternatively, directly apply to this Advert! Proactive Global is committed to equality in the workplace and is an equal opportunity employer. Proactive Global is acting as an Employment Business in relation to this vacancy.

Maintenance Technician Department: Engineering Location: Widnes, UK Reports to: EHS Advisor Role Purpose To provide safe, timely and effective maintenance support to production equipment and site facilities, ensuring minimal downtime and overall site reliability. The role also supports continuous improvement initiatives and ensures full compliance with quality, safety and environmental standards. Key Responsibilities Maintenance & Engineering Respond promptly to machine breakdowns within the engineering workshop Carry out preventive and predictive maintenance, including TPM activities Maintain and repair workshop equipment Perform general site maintenance and repairs as required Conduct electrical and mechanical fault finding and repairs Install and modify machinery and equipment Ensure all work complies with BS 7671 Wiring Regulations and control system standards Support fabrication and welding tasks where required Facilities & Site Support Carry out maintenance of site utilities and facilities Work with contractors and equipment suppliers as needed Support ongoing improvements to plant, equipment and processes Compliance & Documentation Maintain accurate maintenance records and documentation Support compliance with ISO 9001, ISO 14001 and ISO 45001 standards Prepare for and support internal and external audits Ensure adherence to EHS, H&S and statutory requirements Continuous Improvement Role model continuous improvement and best practices Contribute to Lean manufacturing initiatives Support EHS and quality-led improvements Key Duties Troubleshoot and repair CNC machines (e.g. Mazak, Hardinge, DMG) Repair pneumatic, hydraulic and automated systems Maintain factory utilities (HVAC, lighting, extraction) Operate workshop equipment for fabricating/fixture support Conduct risk assessments and safety checks Document all work carried out accurately Knowledge, Skills & Experience Essential: Recognised Apprenticeship or NVQ Level 3 (Mechanical or Electrical) Proven experience in a manufacturing maintenance environment Strong diagnostic and repair skills (electrical and mechanical) Knowledge of BS 7671 wiring regulations Experience with CNC equipment and control panels Understanding of pneumatics and hydraulics Ability to read engineering drawings Desirable: 18th Edition Wiring Regulations Knowledge of TPM principles and CI practices Experience with ISO 9001, 14001 and 45001 standards Personal Attributes: Proactive and solution-focused Strong communication skills Ability to work independently and as part of a team Good organisational and documentation skills Adecco acts as an employment agency for permanent recruitment and an employment business for the supply of temporary workers. The Adecco Group UK & Ireland is an Equal Opportunities Employer. By applying for this role your details will be submitted to Adecco. Our Candidate Privacy Information Statement explaining how we will use your information is available on our website.

Maintenance Technician (Mechanical) £35,000 - £40,000 + £45K OTE + 2k Call Out Bonus + Funded Qualifications + Training + Progression + Bonus Bury St Edmunds Are you a Maintenance Technician or similar from a Mechanical background, looking for a static, days based role within a stable global business that will look after you for years to come, through a company bonus and a generous call out bonus? In this hands-on role, you will be carrying out a wide range of planned maintenance on a variety of electrical equipment and facilities. You will be working within a tight knit maintenance team to ensure all controlled temperature facilities, along with the control panels are maintained, offering a range of day-to-day variety. This role will also offer full training on refrigeration through multiple funded courses with Star Refrigeration. Founded over 80 years ago, this global business is one of the biggest logistic companies on the globe. With a catalogue of blue-chip clients within the food industry, they provide a range of services for controlled temperature environments. From manufacturing and servicing to exportation across the globe, they aim to be the one stop for all within the industry. This role would suit a Maintenance Technician from a Mechanical background looking for a static, days-based role within a global business. The Role: Planned and reactive maintenance Working on controlled temperature environments Full training on bespoke temperature courses Monday to Friday 8am - 4:30pm The Person: Maintenance Technician or similar Mechanical Qualification (NVQ, HND/HNC) Reference Number: BBBH24724f Maintenance Engineer, Maintenance, Electrical, HVAC, NVQ, 17 /18 Edition, BTEC, Technician, HVAC, PLC, Hydraulics, Fault Finding, Overtime, Days Based, Training, Refrigeration, Manufacturing If you're interested in this role, click 'apply now' to forward an up-to-date copy of your CV. We are an equal opportunities employer and welcome applications from all suitable candidates. The salary advertised is a guideline for this position. The offered renumeration will be dependent on the extent of your experience, qualifications, and skill set. Ernest Gordon Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job, you accept the T&C's, Privacy Policy and Disclaimers which can be found at our website.

We are currently recruiting for a Mechanical & Electrical Technician to join our team at Bicester Sewage Treatment Works, OX25 2NY.As a successful candidate, you will using your mechanical & electrical knowledge as well as your experience to inspect, maintain, fault diagnose, test, install, modify or repair as appropriate, mechanical plant and associated electrical equipment, in a safe efficient timely and effective manner with minimum supervision allowing us to ensurethat all of our sites remain operational for the benefits of our customers.This is an excellent opportunity to make a real difference to Thames Water's environmental impact, and you will be actively helping to reduce pollution from our sites. What you'll be doing as the Mechanical & Electrical Technician Carrying out scheduled planned maintenance work on mechanical and electrical equipment in compliance with company procedures to minimise plant breakdowns. You will investigate plant failures and carry out repairs as quickly and efficiently as possible to avoid interruptions to the process. This may involve investigating and diagnosing complex faults and carrying out repairs during incidents. You will be expected to provide technical advice, refer to up-to-date technical knowledge, and provide training or support for technical trainees if required. Examples of equipment that you will be working on will be various pumps and associated control gear, 3-phase motors, starters and controls, electronic control systems such as VSDs, automatic valves and penstocks, flow, level and pressure measurement, programmable logic controllers, variable speed drives and controls, and chemical handling and dosing equipment. Participate in a standby rota following the relevant training. Base Location: Bicester STW - OX25 2NY Working Pattern: 38 Hours, Monday- Friday 7:30 am - 3:36 pm plus Standby rota payments & Overtime opportunities can increase the earning potential by up to a further £8,000-£10,000 per annum upon completion of essential company training. All PPE, tools, a company van and a fuel card are provided. You must have previous experience in an electrical apprenticeship, ONC/HNC in engineering, NVQ, or C&G level 3 in Electrical engineering, with an upskill in mechanical NVQ2/3 is crucial. What you should bring to the role To thrive in this role, the essential criteria you'll need are: You should be a time-served apprentice with significant experience in electrical systems working in a "true multi-skilled" capacity. Ideally, you will have been upskilled with a mechanical qualification to allow inspecting, maintaining, fault diagnosis, testing, installing, modifying or repairing mechanical and electrical plant equipment safely and efficiently. For individuals with mechanical or electrical experience only, we will look to develop the right people to dual-skilled status. Knowledge and awareness of health and safety issues are crucial. The work will require physical fitness, as you will work in confined spaces with the successful completion of the appropriate training. A valid driving license is essential, and all necessary equipment, such as the vehicle and tools, is provided. What's in it for you? Competitive salary up to £45,000 per annum, depending on skills and experience. Standby rota payments & Overtime opportunities can increase this earning potential by up to a further £8,000-£10,000 per annum upon completion of essential company training. Performance-related pay plan directly linked to company performance measures and targets. Annual Leave: 24 days holiday per year, increasing to 28 with the length of service (plus bank holidays) Generous Pension Scheme through AON. Access to lots of benefits to help you take care of you and your family's health and wellbeing, and your finances - from annual health MOTs and access to physiotherapy and counselling, to Cycle to Work schemes, shopping vouchers and life assurance. Find out more about our benefits and perks (Please note different T&Cs apply if onsecondment)unities, flexible working arrangements and excellent benefits.If you're looking for a sustainable and successful career where you can make a daily difference to millions of people's lives while helping to protect the world of water for future generations, we'll be here to support you every step of the way. Together, we can build a better future for our customers, our region, and our planet.Real purpose, real support, real opportunities. Come and join the Thames Water family. Why choose us? Learn more.We're committed to being a great, diverse, and inclusive place to work. We welcome applications from everyone and want to ensure you feel supported throughout the recruitment process. If you need any adjustments, whether that's extra time, accessible formats, or anything else, just let us know. We're here to help and support.When a crisis happens, we all rally around to support our customers. As part of Team Thames, you'll have the opportunity to sign up to support our customers on the frontline as an ambassador. Full training will be given for what is undoubtedly an incredibly rewarding experience. It's also a great opportunity to learn more about our business and meet colleagues. Disclaimer: Due to the high volume of applications we receive, we may close the advert earlier than the advertised date, so we encourage you to apply as soon as possible to avoid disappointment.

Electronic Assembly Technician - Power Supplies & LED Lighting This is a hands-on technical role with excellent career progression opportunities into pre-sales engineering and product development support. Key Responsibilities of this Electronic Assembly Technician, West Berkshire job are: Assembly & Modification - Assemble and modify LED lighting products, including routing cables, soldering multicore cables and LED strips, and integrating power supplies and drivers. Testing & Quality Control - Conduct functional and safety testing, troubleshoot technical issues, and ensure compliance with specifications before dispatch. Technical Documentation - Maintain accurate build records, wiring diagrams, and documentation for all assemblies and modifications. Production Coordination - Work within a small team to coordinate workloads, support production planning, and maintain safe working practices. Cross-Functional Collaboration - Liaise with engineering, purchasing, and customer support teams to resolve issues and improve processes. Key Requirements of this Electronic Assembly Technician job, West Berkshire are: Strong hands-on experience with electronic assembly and testing (ideally to IPC-A-610 standards). Proven soldering skills with multicore cables, LED strips, and connectors to a high standard. Understanding of power supplies, lighting systems, and electro-mechanical assemblies. Ability to interpret technical drawings, wiring diagrams, and work instructions accurately. Excellent organisational and communication skills, with a proactive and quality-focused mindset. Relevant qualification such as a Degree, HNC or equivalent in Electrical, Electronic, or Electro-mechanical Engineering preferred. To apply for this Electronic Assembly Technician - Power Supplies & LED Lighting role in West Berkshire, please send your CV to (url removed) or call (phone number removed)

My client are well recognised manufacturer of water boosting and pump solutions are currently needing an experience Test Technician to join the business, they are looking for someone who has got a very hands on background. Test Technician Permanent Monday - Friday 7am- 4pm Hardwicke Test technician Job Description Conduct hydraulic, leak, and electrical testing on completed pump sets, pipework, and control systems to verify performance, safety, and compliance with specifications. Follow testing procedures and specifications to validate flow rate, pressure, duty point, and operational performance of each unit. Identify, record, and communicate faults, defects, or non-conformances with production teams to ensure corrective actions are completed before dispatch. Complete and maintain accurate test documentation, including test records, certificates, and quality sign-off paperwork. Ensure tested units are correctly labelled and maintain a clean, organised, and safe testing environment and equipment area. Test technician Essential Experience/Skills/Qualifications Basic knowledge of hydraulic systems, pump performance, and fluid mechanics, with willingness to develop further through training. Understanding of electrical testing procedures, safe isolation practices, and use of test equipment such as multimeters and insulation testers. Familiarity with pressure testing and leak detection methods, with the ability to follow testing procedures accurately. Strong attention to detail, accurate record keeping skills, and awareness of cold water boosting or heating systems as an added advantage If you feel you're a good fit for this position, please click 'apply'

COMPANY DESCRIPTION, PROFILE AND SCOPE OF ROLE: This is a fantastic opportunity for an experienced Electronics Test Engineer to join an established, global leader in specialist engineering. Based primarily at a facility in County Durham, you will be working on behalf of our client to provide dedicated technical expertise and drive innovation in automated test development. You will report directly to the Senior Electronics Test Engineer and play a pivotal role in the design, development, and validation of custom automated test equipment (ATE). This is an autonomous, on-site position that requires a confident practitioner capable of managing the full test lifecycle while collaborating with wider engineering, NPI, and quality teams. This role offers a culture of trust and accountability, perfect for a professional who thrives on independence, creative problem-solving, and taking ownership of their work. KEY DUTIES & RESPONSIBILITIES: Lead the design, development, and validation of custom automated test equipment (ATE) and bespoke fixtures. Create and optimize test sequences using LabVIEW and Python to enhance automated data capture and analysis. Contribute to the New Product Introduction process through test specification design, PFMEA activities, and failure analysis. Provide expert fault-finding support for both complex electronic products and internal diagnostic rigs. Maintain accurate technical documentation, manage firmware version control, and produce detailed test reports for stakeholders. Deliver technical guidance and training to the technician team to ensure continuous improvement in production testing. QUALIFICATIONS, EXPERIENCE, SKILLS AND ATTRIBUTES: ESSENTIAL Degree in Electrical and Electronic Engineering (BEng) or a relevant discipline. Proven background in a Test Engineering role specifically within a manufacturing or production environment. Strong proficiency in LabVIEW for instrument control and system automation. Competency in Python for automating test routines, data processing, or system interfacing. Experience in database-driven data acquisition (SQL) and a structured approach to hardware troubleshooting. A proactive problem-solver who communicates clearly and can manage multiple priorities in a fast-paced environment. DESIRABLE Proficiency in text-based languages such as Python, C#, or C++. Familiarity with modern automation trends, including the use of LLMs or advanced software tools to accelerate application development. Experience with firmware programming and version control protocols. Knowledge of APQP/SPQP frameworks and reliability engineering principles.