An interesting opportunity is available for a civil engineering design engineer to join a growing multi-disciplinary design and project coordination business who operate across the civil and structural design disciplines. The role will be based from their South Leeds offices where they service both a national and regional client base across variety project sectors (including rail, infrastructure, bridges, water and some general civils project), where your primary responsibilities will be to take a lead on key aspects of design and manage principal projects, as well as having some input into the leadership of the design team. To be considered for this role you should fit the following spec; Have a proven track record of operating in a structural design engineer role, either from a consultancy or contractor environment. Ability to carry drainage design and minor civils projects. Ability to develop detailed design and calculations via a range of computer software. Being able to think methodically and to manage projects. Ability to liaise with professionals and supervise and lead drawing office staff. Ability to work well within a team and within a highly pressurised environment. Ability to interpret client requirements and communicate these requirements to others. High level of written and verbal communication skills. Good attention to detail Familiarity within the rail sector advantageous. This role will offer the successful candidate a supportive environment where you can have key input into the day to day running of small successful business and help shape its future direction, whilst added to your own personal development. If you would like to be considered for this role, please send an up to date CV detailing your career history to date and I will be in touch to discuss the opportunity further.
Jun 16, 2026
Full time
An interesting opportunity is available for a civil engineering design engineer to join a growing multi-disciplinary design and project coordination business who operate across the civil and structural design disciplines. The role will be based from their South Leeds offices where they service both a national and regional client base across variety project sectors (including rail, infrastructure, bridges, water and some general civils project), where your primary responsibilities will be to take a lead on key aspects of design and manage principal projects, as well as having some input into the leadership of the design team. To be considered for this role you should fit the following spec; Have a proven track record of operating in a structural design engineer role, either from a consultancy or contractor environment. Ability to carry drainage design and minor civils projects. Ability to develop detailed design and calculations via a range of computer software. Being able to think methodically and to manage projects. Ability to liaise with professionals and supervise and lead drawing office staff. Ability to work well within a team and within a highly pressurised environment. Ability to interpret client requirements and communicate these requirements to others. High level of written and verbal communication skills. Good attention to detail Familiarity within the rail sector advantageous. This role will offer the successful candidate a supportive environment where you can have key input into the day to day running of small successful business and help shape its future direction, whilst added to your own personal development. If you would like to be considered for this role, please send an up to date CV detailing your career history to date and I will be in touch to discuss the opportunity further.
Junior Project Manager, Site Engineer, Site Supervisor, Site Manager, Civil Engineering Your new company Hays Belfast are currently recruiting for a Junior Project Manager within the Civil Engineering sector. You'll be joining a well established civil engineering contractor operating as a principal contractor on specialist water and infrastructure projects. The company has a proven track record delivering refurbishment and upgrade works within live environments and benefits from a strong pipeline of secured projects. This role offers an excellent opportunity for a Junior Project Manager to develop within a structured, delivery focused business working on nationally significant water assets.This role will require you to be based on site, accommodation can be offered, or it may suit those living in the South Down, South Armagh areas who are within a commutable distance from the project. Your new role As a Junior Project Manager, you will support the delivery of a €4.5m reservoir and dam refurbishment programme across two water infrastructure schemes. The project has an approximate 12-month programme, commencing this summer (target July start) with future projects typically being based in County Down and greater Belfast going forward. Working closely with the Project Manager and site based team, the Junior Project Manager will assist with the day-to-day management of works including reservoir and dam refurbishment, site pipework installation, road construction, concrete repairs and associated civil engineering activities. Your responsibilities will include supporting programme management, coordinating subcontractors, tracking progress, assisting with cost and quality control, and ensuring health & safety and client requirements are met.Accommodation can be provided if required, this Junior Project Manager role would also suit candidates commuting daily from South Down, South Armagh or surrounding areas. What you'll need to succeed To succeed in this Junior Project Manager position, you will have a background in civil engineering, construction or utilities, ideally with exposure to live infrastructure or water sector projects.You will typically demonstrate: Experience in a Junior Project Manager, Project Engineer, Site Engineer or similar roleUnderstanding of civil works such as pipework, concrete repairs, road construction or utilitiesStrong coordination and organisational skills, with the ability to support multiple workstreamsA sound approach to health & safety and quality managementRelevant industry tickets (e.g. SMSTS/SSSTS, CSCS, or working toward them)A proactive attitude and a desire to progress your career as a Project Manager within civilsWhat you'll get in return In return, the Junior Project Manager will secure a role on a high profile water infrastructure project with a reputable civil engineering contractor. You'll receive a competitive package, structured support from experienced project leadership, and exposure across all stages of project delivery.This Junior Project Manager opportunity offers excellent long term career development within the water and utilities sector, alongside project stability, accommodation support where required, and the chance to build strong experience working on large scale water framework projects. What you need to do now If you're interested in this role, click 'apply now' to forward an up-to-date copy of your CV, or call Chis McNamara now. If this job isn't quite right for you, but you are looking for a new position, please contact us for a confidential discussion about your career.
Jun 16, 2026
Full time
Junior Project Manager, Site Engineer, Site Supervisor, Site Manager, Civil Engineering Your new company Hays Belfast are currently recruiting for a Junior Project Manager within the Civil Engineering sector. You'll be joining a well established civil engineering contractor operating as a principal contractor on specialist water and infrastructure projects. The company has a proven track record delivering refurbishment and upgrade works within live environments and benefits from a strong pipeline of secured projects. This role offers an excellent opportunity for a Junior Project Manager to develop within a structured, delivery focused business working on nationally significant water assets.This role will require you to be based on site, accommodation can be offered, or it may suit those living in the South Down, South Armagh areas who are within a commutable distance from the project. Your new role As a Junior Project Manager, you will support the delivery of a €4.5m reservoir and dam refurbishment programme across two water infrastructure schemes. The project has an approximate 12-month programme, commencing this summer (target July start) with future projects typically being based in County Down and greater Belfast going forward. Working closely with the Project Manager and site based team, the Junior Project Manager will assist with the day-to-day management of works including reservoir and dam refurbishment, site pipework installation, road construction, concrete repairs and associated civil engineering activities. Your responsibilities will include supporting programme management, coordinating subcontractors, tracking progress, assisting with cost and quality control, and ensuring health & safety and client requirements are met.Accommodation can be provided if required, this Junior Project Manager role would also suit candidates commuting daily from South Down, South Armagh or surrounding areas. What you'll need to succeed To succeed in this Junior Project Manager position, you will have a background in civil engineering, construction or utilities, ideally with exposure to live infrastructure or water sector projects.You will typically demonstrate: Experience in a Junior Project Manager, Project Engineer, Site Engineer or similar roleUnderstanding of civil works such as pipework, concrete repairs, road construction or utilitiesStrong coordination and organisational skills, with the ability to support multiple workstreamsA sound approach to health & safety and quality managementRelevant industry tickets (e.g. SMSTS/SSSTS, CSCS, or working toward them)A proactive attitude and a desire to progress your career as a Project Manager within civilsWhat you'll get in return In return, the Junior Project Manager will secure a role on a high profile water infrastructure project with a reputable civil engineering contractor. You'll receive a competitive package, structured support from experienced project leadership, and exposure across all stages of project delivery.This Junior Project Manager opportunity offers excellent long term career development within the water and utilities sector, alongside project stability, accommodation support where required, and the chance to build strong experience working on large scale water framework projects. What you need to do now If you're interested in this role, click 'apply now' to forward an up-to-date copy of your CV, or call Chis McNamara now. If this job isn't quite right for you, but you are looking for a new position, please contact us for a confidential discussion about your career.
What Are We Looking For Following continued success, our Treatment Solutions team in Muir of Ord are looking for a Production Project Engineer with a keen interest in project delivery to join us on a permanent basis. You will be responsible for the delivery of projects and manage the performance of projects end-to-end, whilst working with our internal stakeholders to ensure client needs are met. This position would ideally suit someone with the ambition to take on challenges and deliver results, with the support of an experienced team. You ll be afforded the opportunity to be at the forefront of engaging with clients for our various frameworks, as well as benefit from access to an in-house design team to provide technical solutions in real-time. Some Of Your Key Duties Include: Project liaison from enquiry stage to final acceptance and documentation, meeting with Clients as required to discuss specific requirements and carry out site surveys as required. Instructing, directing, controlling and allocating work to Trade Operatives & Apprentices, with attention to quality, productivity and safety. Ensure all technical information is available when required for the delivery of design and/or construction. Interpret and check drawings, specifications and schedules for all activities, directing works accordingly & prepare final documentation (As Built Drawings etc.). Early Identification and resolution of non-conformance within both the design and construction phase Manage the design of systems and products, ensuring alignment with design specifications and technical aspects. Completion of contract documents Management of Project Quality deliverables and procedures ensuring compliance with Internal and Client Quality Systems. Input to Tender, design and construction programmes including progress updates and reporting. Subcontractor liaison, management including tender specification, quotation and H&S documentation review and appraisal. Preparation of Construction Phase Health and Safety Plans for projects with Principal Contractor responsibility under CDM. What Do You Need? Qualification to degree / HND/ HNC in Engineering Systems. Good time management, with the ability to multitask, plan and organise day to day workloads within a busy environment. Good communication skills in both verbal and written communication and ability to follow, interpret and explain technical instructions. Knowledge of the tools, equipment, and materials common to all engineering trades, particularly Mechanical, Electrical and Civil Engineering. Driven, with an ability to work individually and with teams under your direction. Innovative thinking, with and ability to learn, understand, and apply new technologies. Ability to effectively prioritise and execute tasks in a high-pressure environment. Full UK Driving Licence. Who Are We? RSE is a trusted clean water technology company, developing market leading products and solutions for purifying drinking water, recycling wastewater and cleaning water in industrial processes. We are disrupting the water sector, delivering water treatment products, technologies, and services to clients across the UK. RSE provides offsite modular build solutions using a low-carbon approach compared to traditional construction methods and our unique offering to the market focuses on innovation, efficiency, and excellence. Established in 1982, RSE has grown into one of the most prominent MEICA engineering businesses in the UK water industry. We have created a complete in-house and full-service capability from project inception through to design, fabrication, and delivery by means of installation and commissioning. We additionally have one of the largest servicing and maintenance teams in the market, to ensure we re on hand for all our clients needs. Our service offering presents industry-leading innovative solutions and our dedicated staff play a key role in delivering our sustainability and wider business goals. With over 2000 staff across our group of companies, our strategic ambition will see the business continue to grow as we expand our operations and diversify our products. One of RSE s key focuses is driving servant leadership and giving our people the opportunity and responsibility to take an entrepreneurial approach in their career development. What RSE Offer To build successful teams and drive the level of quality that RSE is renowned for, we know we need the best people in the industry. Not only do we require the relevant skillsets, but we also need people with the right attitude and mentality to thrive and grow in an innovative and fast-paced environment. At RSE, you ll be given every opportunity to set the path of your own career through our Business Streams and work within dynamic teams that will require you to rise to the challenge of working for a market leader. Industry-leading salary based on your experience. A flexible career development path, with no restrictions on where your career can go. Holiday Allowance of 31 days per year, rising to 33 days per year after 2 years service. Holiday Buy / Sell Scheme Company Pension Scheme Cycle to Work Discounted National Gym Membership Professional Fees Paid Employee Discount Platform EV/Hybrid Car Lease Scheme Access to our network of health professionals including mental health champions and Occupational Health Nurse. In a flourishing sector where there are vast career opportunities available, we believe by leading transformation in the industry our offering to the market means our people have the space to thrive. If you re interested in a career with a company that will harness your skills and provide you with the support to create your own future within the water industry, apply now.
Jun 16, 2026
Full time
What Are We Looking For Following continued success, our Treatment Solutions team in Muir of Ord are looking for a Production Project Engineer with a keen interest in project delivery to join us on a permanent basis. You will be responsible for the delivery of projects and manage the performance of projects end-to-end, whilst working with our internal stakeholders to ensure client needs are met. This position would ideally suit someone with the ambition to take on challenges and deliver results, with the support of an experienced team. You ll be afforded the opportunity to be at the forefront of engaging with clients for our various frameworks, as well as benefit from access to an in-house design team to provide technical solutions in real-time. Some Of Your Key Duties Include: Project liaison from enquiry stage to final acceptance and documentation, meeting with Clients as required to discuss specific requirements and carry out site surveys as required. Instructing, directing, controlling and allocating work to Trade Operatives & Apprentices, with attention to quality, productivity and safety. Ensure all technical information is available when required for the delivery of design and/or construction. Interpret and check drawings, specifications and schedules for all activities, directing works accordingly & prepare final documentation (As Built Drawings etc.). Early Identification and resolution of non-conformance within both the design and construction phase Manage the design of systems and products, ensuring alignment with design specifications and technical aspects. Completion of contract documents Management of Project Quality deliverables and procedures ensuring compliance with Internal and Client Quality Systems. Input to Tender, design and construction programmes including progress updates and reporting. Subcontractor liaison, management including tender specification, quotation and H&S documentation review and appraisal. Preparation of Construction Phase Health and Safety Plans for projects with Principal Contractor responsibility under CDM. What Do You Need? Qualification to degree / HND/ HNC in Engineering Systems. Good time management, with the ability to multitask, plan and organise day to day workloads within a busy environment. Good communication skills in both verbal and written communication and ability to follow, interpret and explain technical instructions. Knowledge of the tools, equipment, and materials common to all engineering trades, particularly Mechanical, Electrical and Civil Engineering. Driven, with an ability to work individually and with teams under your direction. Innovative thinking, with and ability to learn, understand, and apply new technologies. Ability to effectively prioritise and execute tasks in a high-pressure environment. Full UK Driving Licence. Who Are We? RSE is a trusted clean water technology company, developing market leading products and solutions for purifying drinking water, recycling wastewater and cleaning water in industrial processes. We are disrupting the water sector, delivering water treatment products, technologies, and services to clients across the UK. RSE provides offsite modular build solutions using a low-carbon approach compared to traditional construction methods and our unique offering to the market focuses on innovation, efficiency, and excellence. Established in 1982, RSE has grown into one of the most prominent MEICA engineering businesses in the UK water industry. We have created a complete in-house and full-service capability from project inception through to design, fabrication, and delivery by means of installation and commissioning. We additionally have one of the largest servicing and maintenance teams in the market, to ensure we re on hand for all our clients needs. Our service offering presents industry-leading innovative solutions and our dedicated staff play a key role in delivering our sustainability and wider business goals. With over 2000 staff across our group of companies, our strategic ambition will see the business continue to grow as we expand our operations and diversify our products. One of RSE s key focuses is driving servant leadership and giving our people the opportunity and responsibility to take an entrepreneurial approach in their career development. What RSE Offer To build successful teams and drive the level of quality that RSE is renowned for, we know we need the best people in the industry. Not only do we require the relevant skillsets, but we also need people with the right attitude and mentality to thrive and grow in an innovative and fast-paced environment. At RSE, you ll be given every opportunity to set the path of your own career through our Business Streams and work within dynamic teams that will require you to rise to the challenge of working for a market leader. Industry-leading salary based on your experience. A flexible career development path, with no restrictions on where your career can go. Holiday Allowance of 31 days per year, rising to 33 days per year after 2 years service. Holiday Buy / Sell Scheme Company Pension Scheme Cycle to Work Discounted National Gym Membership Professional Fees Paid Employee Discount Platform EV/Hybrid Car Lease Scheme Access to our network of health professionals including mental health champions and Occupational Health Nurse. In a flourishing sector where there are vast career opportunities available, we believe by leading transformation in the industry our offering to the market means our people have the space to thrive. If you re interested in a career with a company that will harness your skills and provide you with the support to create your own future within the water industry, apply now.
Senior / Principal / Associate Director Flood Modeller/Hydrology UK wide 75,000 plus benefits Exceptional opportunities exist with this leading consultancy who continue to grow their water group across the country. We are keen to hear from Senior to Associate Director level individuals with strong Flood Modelling/Hydrology experience. At Senior/Principal level you will lead and manage commissions, sign off modelling reporting, manage budgets as well as change control and mentor modellers. The Associate Director will act as Project Director on key commissions, lead client relationships and work-winning, set modelling governance standards across the team and oversee portfolio performance. The main focus surrounds the leadership and management and the delivery of hydrology and hydraulic modelling commissions (1D/2D fluvial, tidal and surface water) to support planning, design and construction. Providing technical direction, managing programme/budget/risk/QA, coordinate multi-disciplinary inputs, and acted as the key client interface for modelling work streams. In more detail the role will be to:- Lead and manage modelling projects end-to-end: define scope and methodology, set programme, manage budget, control risk, and deliver to agreed QA/QMS standards. Lead and manage hydrology inputs: catchment assessment, rainfall/flow estimation, hydrograph derivation, climate change allowances, and clear documentation of assumptions and uncertainty. Lead and coordinate model build, verification and scenario testing (e.g., climate change, breach/blockage, sensitivities) ensuring outputs are fit for purpose. Provide technical direction on data requirements, boundary conditions, model schematisation, mesh strategy, time step selection, roughness/structures representation, stability/performance and optimisation. Interpret and communicate results into clear, decision-ready advice for clients and design teams (mitigation optioneering, levels/FFL strategy, safe access/egress, residual risk, exceedance routing, floodplain compensation concepts where applicable). Produce and sign-off technical reports/appendices suitable for regulator review and planning/design submissions; respond to technical queries and challenge. Lead and manage stakeholder engagement with EA/LLFAs/LPAs and other technical reviewers (method agreement, meetings, review responses). Coordinate interfaces with drainage, civils, highways, geotechnical and planning teams to ensure consistent assumptions and integrated outcomes. Resource-plan and delegate tasks; mentor junior modellers; maintain consistent standards, templates, and auditable file/version control. Contribute to bids: scope, methodology, programme, assumptions, risks and fee inputs; identify follow-on opportunities. For your part you will possess:- Strong UK consultancy experience leading hydrology and hydraulic modelling projects, including delivery governance (scope/programme/budget/risk/QA). Demonstrable hydrology competence: flow estimation and hydrograph development; confident selection of methods appropriate to catchment type, data availability and study purpose; able to communicate uncertainty and sensitivity clearly. Strong hydraulic modelling understanding (stability, mesh/timestep, roughness, structures representation, boundary conditions, calibration/validation where possible). Confident client-facing communicator with excellent technical writing and project management discipline. Advanced capability in one or more of: TUFLOW, Flood Modeller, InfoWorks ICM. Strong GIS skills (QGIS/ArcGIS) for data preparation and mapping outputs. Desirable: hydrology tools familiarity (e.g., ReFH2, WINFAP, FEH methods or equivalent), plus Python/data processing and CAD familiarity. A graduate in Civil Engineering, Water/Environmental Engineering, Hydrology, Geography or similar and preferably Chartered (ICE/CIWEM) In return you can expect an above industry salary and benefits package together with unrivalled career progression.
Jun 15, 2026
Full time
Senior / Principal / Associate Director Flood Modeller/Hydrology UK wide 75,000 plus benefits Exceptional opportunities exist with this leading consultancy who continue to grow their water group across the country. We are keen to hear from Senior to Associate Director level individuals with strong Flood Modelling/Hydrology experience. At Senior/Principal level you will lead and manage commissions, sign off modelling reporting, manage budgets as well as change control and mentor modellers. The Associate Director will act as Project Director on key commissions, lead client relationships and work-winning, set modelling governance standards across the team and oversee portfolio performance. The main focus surrounds the leadership and management and the delivery of hydrology and hydraulic modelling commissions (1D/2D fluvial, tidal and surface water) to support planning, design and construction. Providing technical direction, managing programme/budget/risk/QA, coordinate multi-disciplinary inputs, and acted as the key client interface for modelling work streams. In more detail the role will be to:- Lead and manage modelling projects end-to-end: define scope and methodology, set programme, manage budget, control risk, and deliver to agreed QA/QMS standards. Lead and manage hydrology inputs: catchment assessment, rainfall/flow estimation, hydrograph derivation, climate change allowances, and clear documentation of assumptions and uncertainty. Lead and coordinate model build, verification and scenario testing (e.g., climate change, breach/blockage, sensitivities) ensuring outputs are fit for purpose. Provide technical direction on data requirements, boundary conditions, model schematisation, mesh strategy, time step selection, roughness/structures representation, stability/performance and optimisation. Interpret and communicate results into clear, decision-ready advice for clients and design teams (mitigation optioneering, levels/FFL strategy, safe access/egress, residual risk, exceedance routing, floodplain compensation concepts where applicable). Produce and sign-off technical reports/appendices suitable for regulator review and planning/design submissions; respond to technical queries and challenge. Lead and manage stakeholder engagement with EA/LLFAs/LPAs and other technical reviewers (method agreement, meetings, review responses). Coordinate interfaces with drainage, civils, highways, geotechnical and planning teams to ensure consistent assumptions and integrated outcomes. Resource-plan and delegate tasks; mentor junior modellers; maintain consistent standards, templates, and auditable file/version control. Contribute to bids: scope, methodology, programme, assumptions, risks and fee inputs; identify follow-on opportunities. For your part you will possess:- Strong UK consultancy experience leading hydrology and hydraulic modelling projects, including delivery governance (scope/programme/budget/risk/QA). Demonstrable hydrology competence: flow estimation and hydrograph development; confident selection of methods appropriate to catchment type, data availability and study purpose; able to communicate uncertainty and sensitivity clearly. Strong hydraulic modelling understanding (stability, mesh/timestep, roughness, structures representation, boundary conditions, calibration/validation where possible). Confident client-facing communicator with excellent technical writing and project management discipline. Advanced capability in one or more of: TUFLOW, Flood Modeller, InfoWorks ICM. Strong GIS skills (QGIS/ArcGIS) for data preparation and mapping outputs. Desirable: hydrology tools familiarity (e.g., ReFH2, WINFAP, FEH methods or equivalent), plus Python/data processing and CAD familiarity. A graduate in Civil Engineering, Water/Environmental Engineering, Hydrology, Geography or similar and preferably Chartered (ICE/CIWEM) In return you can expect an above industry salary and benefits package together with unrivalled career progression.
Bennett & Game are pleased to be representing a well-established and employee-owned civil and structural engineering consultancy based in Cardiff. With over 30 years of industry presence, they are now seeking a Senior / Principal Structural Engineer to join their growing team due to continued project success and a strong pipeline of work. This is an excellent opportunity for an experienced Structural Engineer who is either Chartered, or approaching Chartership, to join a respected consultancy offering genuine career progression, project ownership and long-term stability within an employee-owned business. The successful candidate will be involved in the design and delivery of a wide range of structural engineering projects across the residential, commercial, education, healthcare, leisure, industrial and restoration sectors. The role would suit someone confident in technical design, client liaison and project delivery who is looking to step into a more senior position within a supportive consultancy environment. Senior / Principal Structural Engineer Job Overview Deliver structural design solutions across a variety of building projects, including new build, refurbishment, conversion and restoration schemes Work on structural alterations, repair and strengthening projects across multiple sectors Produce and review calculations, drawings, specifications and technical reports Lead projects from concept through to completion, ensuring technical quality and commercial delivery Liaise with clients, architects, contractors and wider design teams Support junior engineers and technicians with technical guidance and project delivery Attend site visits, design meetings and client meetings where required Contribute to the continued growth and development of the structural engineering team Senior / Principal Structural Engineer Job Requirements Degree qualified in Structural Engineering, Civil Engineering or a related discipline Chartered or working towards Chartership with IStructE or ICE Strong experience within a UK structural engineering consultancy environment Experience delivering building structures projects across a range of sectors Confident working with steel, concrete, masonry and timber structures Ability to manage projects, liaise with clients and coordinate with external design teams Strong technical design ability and commercial awareness Experience mentoring or supporting junior members of staff would be advantageous Full UK driving licence desirable Senior / Principal Structural Engineer Salary & Benefits Circa to 60,000 Employee-owned business structure Private healthcare Genuine progression to senior leadership level Support towards Chartership, where required Opportunity to work on a varied and high-quality project portfolio Professional and collaborative working environment Long-term career stability within a growing consultancy Pension scheme Holiday: 25 days per year Additional company benefits to be discussed at interview Bennett and Game Recruitment are a multi-disciplined technical recruitment agency based in Chichester, West Sussex operating across the UK with specialist teams covering a range of industries. We are acting as a Recruitment Agency in relation to this vacancy, and in accordance with GDPR by applying you are granting us consent to process your data, contact you about the services we offer, and submit your CV for the role you have applied for.
Jun 15, 2026
Full time
Bennett & Game are pleased to be representing a well-established and employee-owned civil and structural engineering consultancy based in Cardiff. With over 30 years of industry presence, they are now seeking a Senior / Principal Structural Engineer to join their growing team due to continued project success and a strong pipeline of work. This is an excellent opportunity for an experienced Structural Engineer who is either Chartered, or approaching Chartership, to join a respected consultancy offering genuine career progression, project ownership and long-term stability within an employee-owned business. The successful candidate will be involved in the design and delivery of a wide range of structural engineering projects across the residential, commercial, education, healthcare, leisure, industrial and restoration sectors. The role would suit someone confident in technical design, client liaison and project delivery who is looking to step into a more senior position within a supportive consultancy environment. Senior / Principal Structural Engineer Job Overview Deliver structural design solutions across a variety of building projects, including new build, refurbishment, conversion and restoration schemes Work on structural alterations, repair and strengthening projects across multiple sectors Produce and review calculations, drawings, specifications and technical reports Lead projects from concept through to completion, ensuring technical quality and commercial delivery Liaise with clients, architects, contractors and wider design teams Support junior engineers and technicians with technical guidance and project delivery Attend site visits, design meetings and client meetings where required Contribute to the continued growth and development of the structural engineering team Senior / Principal Structural Engineer Job Requirements Degree qualified in Structural Engineering, Civil Engineering or a related discipline Chartered or working towards Chartership with IStructE or ICE Strong experience within a UK structural engineering consultancy environment Experience delivering building structures projects across a range of sectors Confident working with steel, concrete, masonry and timber structures Ability to manage projects, liaise with clients and coordinate with external design teams Strong technical design ability and commercial awareness Experience mentoring or supporting junior members of staff would be advantageous Full UK driving licence desirable Senior / Principal Structural Engineer Salary & Benefits Circa to 60,000 Employee-owned business structure Private healthcare Genuine progression to senior leadership level Support towards Chartership, where required Opportunity to work on a varied and high-quality project portfolio Professional and collaborative working environment Long-term career stability within a growing consultancy Pension scheme Holiday: 25 days per year Additional company benefits to be discussed at interview Bennett and Game Recruitment are a multi-disciplined technical recruitment agency based in Chichester, West Sussex operating across the UK with specialist teams covering a range of industries. We are acting as a Recruitment Agency in relation to this vacancy, and in accordance with GDPR by applying you are granting us consent to process your data, contact you about the services we offer, and submit your CV for the role you have applied for.
Locations: East Midlands (England), East of England, London (region), North East England, North West England, Scotland, South East England, South West England, Wales, West Midlands (England), Yorkshire and the Humber The Role Please note this role requires you to pass Security Check clearance. Please click on the link for details. We're recruiting for a Lead Developer here at Justice Digital , to be part of our warm and collaborative Developer Experience team which sits in the Office of the Chief Technology Officer (OCTO). This role aligns against the Lead Developer Role from the Government Digital and Data Framework OCTO sets technical direction across the organisation. It defines standards, shapes platforms and ways of working, and supports teams to build and operate services that are secure, reliable and sustainable. This role focuses on improving how engineers work by defining standards and ensuring they are implemented through shared tooling rather than guidance alone. You will play an integral part in central teams responsible for Developer Experience (DevX) and the Developer Portal, working closely with platform, security and architecture teams. You'll be confident working with other developers on our tech stack and comfortable learning new technologies and systems. We use a variety of different technologies and will work with you to place you in a team that matches your skills, interests and aspirations wherever possible. You will work with user researchers, product managers, designers, delivery managers, technical architects and content specialists who share a vision for improving government through smarter use of technology. You can find more details of the Benefits we offer here . To help picture your life at MoJ Justice Digital, Data and Science please take a look at our blog. Our Tech Stack We use a range of technologies and we're looking for people who specialise in one or more of them (Python or Java) and who love learning new languages and frameworks. For example, we might use Python to write our application code, Circle CI or GitHub Actions for CI/CD, Sentry for application monitoring, Kubernetes and Docker to schedule and run our services (read about our Cloud Platform), AWS for most of our infrastructure, GOV.UK Design System for our web interfaces and use Macbook Pros. For front-end development, we value a robust understanding of the underlying web technologies. We value well-maintained, open-source tools that can be used to produce semantic HTML, performant CSS and unobtrusive JavaScript or TypeScript, and we assess all our services against accessibility criteria. We're happy to help you learn our tech stack once you're part of our team, and do not require an exact match in your experience of languages. Check out GitHub for a closer look at the technologies we use, and a complete list of services that we build and maintain. We subscribe to the manifesto for agile software development. Our Community We currently have over 200+ experienced developers who make up the engineering community across the MoJ. You will coach and mentor junior colleagues and take part in informal support networks with your peers. You will be encouraged to play an active role in the engineering community and culture. We take the responsibility of supportive and effective line management very seriously. We will value the skills you bring to the civil service and help you to build on them. When the time is right, we will support moving between teams or government departments to learn different technologies, or take on more responsibility, according to your career goals. Take a look at our developer blog to get a sense of our work and culture. Key Responsibilities This role combines a number of key disciplines in addition to hands-on development and writing code. You will inspire, mentor, coach, manage and lead software developers within a business domain. You will also focus on generating a culture of quality, maintaining balance between building sustainable well architected products and unlocking citizen value early The areas of your responsibility for leadership will shift between people, architecture, development and product strategy, depending on context and need You will contribute to the technical leadership in DevX team, specifically Developer Tooling. There will be opportunity to line manage several Senior Developers as the team expands into Developer Portal. Technical Leadership Taking responsibility for tickets and releasing production ready code Collaborate with Technical Architects and Product Managers to set product direction Collaborate with Technical Architects to help in the design of systems and implementation of coherent and sustainable technical roadmaps Lead discussions with Developers to nurture consensus on technical/team decisions Support backlog refinement, helping plan, define and prioritise actionable tasks for the team Build inclusivity and understanding by promoting strategies to share technical knowledge of our systems with appropriate documentation and other activities Support Delivery Managers in unblocking value where necessary and/or honest representations of effort in an agile environment as the teams learn more Engineering Management Managing, coaching and growing people with a focus on their wellbeing and development Support Delivery Managers in improving team maturity Engineering Profession Work with your local Principal Developer and the wider community to improve and maintain good coding standards and practices Help provide feedback on wider technical strategy of your business unit Share knowledge and build enthusiasm for sharing via activities like brown bags, cooperative workshops, chat discussions and other means Encourage open discussion and drive communities in our primary communication tools Have a mindset for growth and learning looking for emerging technologies, tools and good practice Help build and maintain a diverse, inclusive culture across the development community, growing awareness, inclusivity, and balance Take part in the recruitment and onboarding of other Developers If this feels like an exciting challenge, something you are enthusiastic about, and want to join our team please read on and apply! Person Specification Essential You can demonstrate proven experience of Python or Java. You have experience of software development and writing production ready code. You have experience nurturing a culture of good software practice that makes change easy. You can share evidence of growing your skills in technical leadership, and advocating for your team. You have coached other people. You have contributed towards building a high performing, inclusive team culture. You have experience in delivering better value sooner and safer, through DevOps, XP or other ways of working that lead to agility and collaboration. You enjoy building long-lasting relationships and trust with others. You have proven technical leadership skills. You have grown sustainable teams. Willingness to be assessed against the requirements for SC clearance.
Jun 15, 2026
Full time
Locations: East Midlands (England), East of England, London (region), North East England, North West England, Scotland, South East England, South West England, Wales, West Midlands (England), Yorkshire and the Humber The Role Please note this role requires you to pass Security Check clearance. Please click on the link for details. We're recruiting for a Lead Developer here at Justice Digital , to be part of our warm and collaborative Developer Experience team which sits in the Office of the Chief Technology Officer (OCTO). This role aligns against the Lead Developer Role from the Government Digital and Data Framework OCTO sets technical direction across the organisation. It defines standards, shapes platforms and ways of working, and supports teams to build and operate services that are secure, reliable and sustainable. This role focuses on improving how engineers work by defining standards and ensuring they are implemented through shared tooling rather than guidance alone. You will play an integral part in central teams responsible for Developer Experience (DevX) and the Developer Portal, working closely with platform, security and architecture teams. You'll be confident working with other developers on our tech stack and comfortable learning new technologies and systems. We use a variety of different technologies and will work with you to place you in a team that matches your skills, interests and aspirations wherever possible. You will work with user researchers, product managers, designers, delivery managers, technical architects and content specialists who share a vision for improving government through smarter use of technology. You can find more details of the Benefits we offer here . To help picture your life at MoJ Justice Digital, Data and Science please take a look at our blog. Our Tech Stack We use a range of technologies and we're looking for people who specialise in one or more of them (Python or Java) and who love learning new languages and frameworks. For example, we might use Python to write our application code, Circle CI or GitHub Actions for CI/CD, Sentry for application monitoring, Kubernetes and Docker to schedule and run our services (read about our Cloud Platform), AWS for most of our infrastructure, GOV.UK Design System for our web interfaces and use Macbook Pros. For front-end development, we value a robust understanding of the underlying web technologies. We value well-maintained, open-source tools that can be used to produce semantic HTML, performant CSS and unobtrusive JavaScript or TypeScript, and we assess all our services against accessibility criteria. We're happy to help you learn our tech stack once you're part of our team, and do not require an exact match in your experience of languages. Check out GitHub for a closer look at the technologies we use, and a complete list of services that we build and maintain. We subscribe to the manifesto for agile software development. Our Community We currently have over 200+ experienced developers who make up the engineering community across the MoJ. You will coach and mentor junior colleagues and take part in informal support networks with your peers. You will be encouraged to play an active role in the engineering community and culture. We take the responsibility of supportive and effective line management very seriously. We will value the skills you bring to the civil service and help you to build on them. When the time is right, we will support moving between teams or government departments to learn different technologies, or take on more responsibility, according to your career goals. Take a look at our developer blog to get a sense of our work and culture. Key Responsibilities This role combines a number of key disciplines in addition to hands-on development and writing code. You will inspire, mentor, coach, manage and lead software developers within a business domain. You will also focus on generating a culture of quality, maintaining balance between building sustainable well architected products and unlocking citizen value early The areas of your responsibility for leadership will shift between people, architecture, development and product strategy, depending on context and need You will contribute to the technical leadership in DevX team, specifically Developer Tooling. There will be opportunity to line manage several Senior Developers as the team expands into Developer Portal. Technical Leadership Taking responsibility for tickets and releasing production ready code Collaborate with Technical Architects and Product Managers to set product direction Collaborate with Technical Architects to help in the design of systems and implementation of coherent and sustainable technical roadmaps Lead discussions with Developers to nurture consensus on technical/team decisions Support backlog refinement, helping plan, define and prioritise actionable tasks for the team Build inclusivity and understanding by promoting strategies to share technical knowledge of our systems with appropriate documentation and other activities Support Delivery Managers in unblocking value where necessary and/or honest representations of effort in an agile environment as the teams learn more Engineering Management Managing, coaching and growing people with a focus on their wellbeing and development Support Delivery Managers in improving team maturity Engineering Profession Work with your local Principal Developer and the wider community to improve and maintain good coding standards and practices Help provide feedback on wider technical strategy of your business unit Share knowledge and build enthusiasm for sharing via activities like brown bags, cooperative workshops, chat discussions and other means Encourage open discussion and drive communities in our primary communication tools Have a mindset for growth and learning looking for emerging technologies, tools and good practice Help build and maintain a diverse, inclusive culture across the development community, growing awareness, inclusivity, and balance Take part in the recruitment and onboarding of other Developers If this feels like an exciting challenge, something you are enthusiastic about, and want to join our team please read on and apply! Person Specification Essential You can demonstrate proven experience of Python or Java. You have experience of software development and writing production ready code. You have experience nurturing a culture of good software practice that makes change easy. You can share evidence of growing your skills in technical leadership, and advocating for your team. You have coached other people. You have contributed towards building a high performing, inclusive team culture. You have experience in delivering better value sooner and safer, through DevOps, XP or other ways of working that lead to agility and collaboration. You enjoy building long-lasting relationships and trust with others. You have proven technical leadership skills. You have grown sustainable teams. Willingness to be assessed against the requirements for SC clearance.
Location Newport, NP10 8QQ About the job Job summary Senior Dynamics Developer The IPO is a modern organisation which depends on its IT services to operate and innovate effectively. To provide up to date services to our customers systems need to be developed, improved, and maintained. This position plays a pivotal role in ensuring the core applications are reviewed and continually improved. You will need the appetite to learn new technologies and methodologies for delivering high quality IT services. In this role you will work within a multi-disciplined squad using several technologies to build enterprise grade services. You will be expected to be proactive and take accountability for the squad assigned deliveries. The role will also require the investigation, diagnosis and fix of any system issues. A Senior Developer is expected to contribute to the technical strategy for the department. As a multi-skilled individual specialising in MS Dynamics and Power Apps, you will have the opportunities to develop and mature skills in a core role but extend this to skills typically aligned to other role types. You will have a high level of input in defining which additional skills you can develop. This is a rolling recruitment exercise. Applications will be assessed at regular intervals against the published criteria. Selection decisions will be made on merit, following fair and open competition, in line with the Civil Service Commission's Recruitment Principles. We may appoint candidates as assessment stages are completed and may close the advert early or create a reserve list where sufficient candidates are identified. Working Style This role will be carried out in-line with IPO Hybrid working arrangements where staff are currently expected to spend at least 20% of their time working onsite from one of our offices. This role is based in our Newport Office . The requirement for attendance at an office location can vary by role so we would encourage candidates to discuss working arrangements with the recruiting manager to agree a reasonable balance between working from home and the office. Job description Main duties consist of but are not limited to: Technical Be responsible for the design, coding, configuration, testing and documentation of large, complex or mission critical applications in a cloud first environment using Dynamics and Power Apps in MS Azure Configure and customise both model model-driven and canvas apps Develop Power Automate Flows via connectors to the Dataverse and other data sources Develop PowerApps integrations with other Azure components such as Logic Apps, Azure Service Bus and Azure Functions Work closely with test engineers to reach a common understanding of acceptance criteria, the code base and test coverage Work collaboratively with IT and stakeholders, share knowledge and expertise with your wider team, aspire to be a role model within the organisation, champion our culture of learning, development, cross-company collaboration and teamwork Proactively investigate problems and opportunities in existing processes, evaluating and communicating findings and recommendations to stakeholders Identify and manage defects, incidents, risks and issues in line with IPO standards Work within a multi-disciplinary team to deliver highly user focused and successful digital services ensuring governance standards are adhered to Assist in implementing toolkits and APIs for purposes such as integration, performance optimisation, security and scalability Keeping an open mind and exploring innovative ways to solve problems, working in a fail-fast fashion to provide required functionality Embrace a continuous improvement ethos Responsible for ensuring that the team test and build activities follow agreed governance and processes Proactively apply HMG IA technical security controls according to ISO 27001 & the Security Policy Framework (SPF) Behavioural Understanding yourself to be a leader (and the impact of your behaviour on others in a project team focused on results) Engaging Stakeholders (for mutually beneficial collaborative relationships outside of the team) Share knowledge and expertise with your wider team, aspire to be a role model within the organisation, champion our culture of learning, development, cross-company collaboration and teamwork Work across several multi-disciplinary teams to deliver highly focused and successful digital services Provide project / delivery management support when required Effective management and delegation of tasks within the team Applies "progress over perfection" principle Takes full responsibility for decisions and delivers Inner composure, recovers quickly from setbacks and learns from the experience Highly driven & inspires others to move things along and make things happen Personal and Team Development Drive your own training and self-development, keeping skills up to date and learning new skills Promote and display the IPO and Civil Service Values Guides more junior members in their personal development Coaches and mentors' colleagues Continuously improves technical knowledge and stays abreast of latest trends Shares knowledge of tools and techniques with your wider team and the business stakeholders Person specification Essential Experience Has been a key player in delivering technical solutions as part of large projects Experienced with modern delivery models such as Scrum and other Agile methodologies Advocate of DevOps principles Experience working in a Microsoft Azure Cloud first team Experience with Azure DevOps Essential Technical Experience of MS Dynamics CRM and PowerApps platform Has a deep understanding of architectural principals such as SOA and Micro-Services Technical aptitude Proficiency in one or more of these languages: C#, Python, JavaScript, Typescript Experience writing and implementing Unit Testing
Jun 15, 2026
Full time
Location Newport, NP10 8QQ About the job Job summary Senior Dynamics Developer The IPO is a modern organisation which depends on its IT services to operate and innovate effectively. To provide up to date services to our customers systems need to be developed, improved, and maintained. This position plays a pivotal role in ensuring the core applications are reviewed and continually improved. You will need the appetite to learn new technologies and methodologies for delivering high quality IT services. In this role you will work within a multi-disciplined squad using several technologies to build enterprise grade services. You will be expected to be proactive and take accountability for the squad assigned deliveries. The role will also require the investigation, diagnosis and fix of any system issues. A Senior Developer is expected to contribute to the technical strategy for the department. As a multi-skilled individual specialising in MS Dynamics and Power Apps, you will have the opportunities to develop and mature skills in a core role but extend this to skills typically aligned to other role types. You will have a high level of input in defining which additional skills you can develop. This is a rolling recruitment exercise. Applications will be assessed at regular intervals against the published criteria. Selection decisions will be made on merit, following fair and open competition, in line with the Civil Service Commission's Recruitment Principles. We may appoint candidates as assessment stages are completed and may close the advert early or create a reserve list where sufficient candidates are identified. Working Style This role will be carried out in-line with IPO Hybrid working arrangements where staff are currently expected to spend at least 20% of their time working onsite from one of our offices. This role is based in our Newport Office . The requirement for attendance at an office location can vary by role so we would encourage candidates to discuss working arrangements with the recruiting manager to agree a reasonable balance between working from home and the office. Job description Main duties consist of but are not limited to: Technical Be responsible for the design, coding, configuration, testing and documentation of large, complex or mission critical applications in a cloud first environment using Dynamics and Power Apps in MS Azure Configure and customise both model model-driven and canvas apps Develop Power Automate Flows via connectors to the Dataverse and other data sources Develop PowerApps integrations with other Azure components such as Logic Apps, Azure Service Bus and Azure Functions Work closely with test engineers to reach a common understanding of acceptance criteria, the code base and test coverage Work collaboratively with IT and stakeholders, share knowledge and expertise with your wider team, aspire to be a role model within the organisation, champion our culture of learning, development, cross-company collaboration and teamwork Proactively investigate problems and opportunities in existing processes, evaluating and communicating findings and recommendations to stakeholders Identify and manage defects, incidents, risks and issues in line with IPO standards Work within a multi-disciplinary team to deliver highly user focused and successful digital services ensuring governance standards are adhered to Assist in implementing toolkits and APIs for purposes such as integration, performance optimisation, security and scalability Keeping an open mind and exploring innovative ways to solve problems, working in a fail-fast fashion to provide required functionality Embrace a continuous improvement ethos Responsible for ensuring that the team test and build activities follow agreed governance and processes Proactively apply HMG IA technical security controls according to ISO 27001 & the Security Policy Framework (SPF) Behavioural Understanding yourself to be a leader (and the impact of your behaviour on others in a project team focused on results) Engaging Stakeholders (for mutually beneficial collaborative relationships outside of the team) Share knowledge and expertise with your wider team, aspire to be a role model within the organisation, champion our culture of learning, development, cross-company collaboration and teamwork Work across several multi-disciplinary teams to deliver highly focused and successful digital services Provide project / delivery management support when required Effective management and delegation of tasks within the team Applies "progress over perfection" principle Takes full responsibility for decisions and delivers Inner composure, recovers quickly from setbacks and learns from the experience Highly driven & inspires others to move things along and make things happen Personal and Team Development Drive your own training and self-development, keeping skills up to date and learning new skills Promote and display the IPO and Civil Service Values Guides more junior members in their personal development Coaches and mentors' colleagues Continuously improves technical knowledge and stays abreast of latest trends Shares knowledge of tools and techniques with your wider team and the business stakeholders Person specification Essential Experience Has been a key player in delivering technical solutions as part of large projects Experienced with modern delivery models such as Scrum and other Agile methodologies Advocate of DevOps principles Experience working in a Microsoft Azure Cloud first team Experience with Azure DevOps Essential Technical Experience of MS Dynamics CRM and PowerApps platform Has a deep understanding of architectural principals such as SOA and Micro-Services Technical aptitude Proficiency in one or more of these languages: C#, Python, JavaScript, Typescript Experience writing and implementing Unit Testing
Site Engineer Based in Suffolk - Working on a Large Sizewell C Infrastructure Project £55k-£60k + Company Vehicle & Fuel Card (Can be used for personal mileage) 24 Days holiday + Bank Holidays + Health Insurance 5D are working with a leading civils contractor who is heavily involved in HS2 and a variety of other blue-chip construction and infrastructure projects. Over the last twenty years this business has grown to be one of the UK s leading principal contractors and have developed a reputation for excellence. Working on road and infrastructure upgrades on the Sizewell C site, this project is estimated to be at least 3 years, and is focussed on the earthworks for road and infrastructure upgrades around the site of Sizewell C. What the Role Will Involve: Establishing site control. Setting-up GPS base stations on site. Topographical surveys using GPS instruments. Setting out of complex sites. Processing surveys. Quantifying stockpiles and running earthworks analysis Checking machine control accuracy and completing site QA. Diagnosing machine control faults. Working alongside a senior site engineer. What we are Looking in a Candidate: Experience with road infrastructure projects. Experience in a similar role, ideally with groundworks but this is not essential. Full driving licence. What we can offer the successful candidate: An opportunity to work on a wide variety of construction and earthmoving projects. Vitality Health Insurance on completion of your probationary period. Unfortunately, sponsorship cannot be offered for this role.
Jun 14, 2026
Full time
Site Engineer Based in Suffolk - Working on a Large Sizewell C Infrastructure Project £55k-£60k + Company Vehicle & Fuel Card (Can be used for personal mileage) 24 Days holiday + Bank Holidays + Health Insurance 5D are working with a leading civils contractor who is heavily involved in HS2 and a variety of other blue-chip construction and infrastructure projects. Over the last twenty years this business has grown to be one of the UK s leading principal contractors and have developed a reputation for excellence. Working on road and infrastructure upgrades on the Sizewell C site, this project is estimated to be at least 3 years, and is focussed on the earthworks for road and infrastructure upgrades around the site of Sizewell C. What the Role Will Involve: Establishing site control. Setting-up GPS base stations on site. Topographical surveys using GPS instruments. Setting out of complex sites. Processing surveys. Quantifying stockpiles and running earthworks analysis Checking machine control accuracy and completing site QA. Diagnosing machine control faults. Working alongside a senior site engineer. What we are Looking in a Candidate: Experience with road infrastructure projects. Experience in a similar role, ideally with groundworks but this is not essential. Full driving licence. What we can offer the successful candidate: An opportunity to work on a wide variety of construction and earthmoving projects. Vitality Health Insurance on completion of your probationary period. Unfortunately, sponsorship cannot be offered for this role.
Senior Civil Design Engineer This is an opportunity to join a well-established independent Consultancy that has been delivering Civil, Structural and Geo-Environmental Engineering solutions for over 35 years. With offices in Yorkshire and projects delivered nationwide, the Consultancy has developed an enviable reputation for providing practical, commercially focused engineering advice across the residential, commercial, leisure and industrial sectors. A significant proportion of its work comes from repeat business and long-standing client relationships, built on a straightforward approach, trusted technical advice and a genuine commitment to adding value throughout the design process. The team takes pride in developing lean, efficient engineering solutions rather than simply over-designing schemes, working closely with clients, architects and contractors to overcome site constraints, improve development potential and deliver the most effective outcome possible. Supported by an in-house Civil, Structural and Geo-Environmental capability, projects benefit from a highly coordinated approach from initial concept through to construction. As a Senior Civil Engineer, you will take a leading role in the delivery of infrastructure projects, managing schemes from concept through to completion whilst supporting the continued growth and development of the Civil Engineering team. Working closely with Directors and Associates, you will provide technical leadership across a varied portfolio of projects whilst maintaining responsibility for project delivery, client relationships and commercial performance. You will oversee the design and coordination of highways, drainage and development infrastructure schemes, including site appraisals, drainage strategies, Flood Risk Assessments, SuDS assessments, site levels design, cut and fill analysis, private and adoptable drainage systems, highway designs, earthworks strategies and external works packages. The role will also involve securing technical approvals through Section 104, 106, 38 and 278 agreements whilst working closely with local authorities, water companies, Lead Local Flood Authorities and other stakeholders. You will play a key role throughout the project lifecycle, contributing from initial feasibility and concept design through planning, detailed design and construction support. You will be expected to identify practical and cost-effective engineering solutions, challenge layouts where necessary and help clients maximise the potential of their developments whilst maintaining compliance with current standards and legislation. Alongside project delivery responsibilities, you will act as a key point of contact for clients, lead project meetings, contribute to fee proposals and business development activities and help strengthen existing client relationships. You will also provide mentorship and technical support to Graduate Engineers, Project Engineers and Technicians, supporting their progression towards professional qualifications and helping to maintain high technical standards across the team. Applicants should be degree qualified in Civil Engineering and possess strong experience delivering infrastructure and drainage designs within a Consultancy environment. A thorough understanding of development-led Civil Engineering projects is required, together with experience in highways design, drainage strategies, SuDS and technical approval processes including Sections 38, 278, 104 and 106 agreements. You will be proficient in Civil 3D and MicroDrainage or InfoDrainage and be comfortable managing multiple projects simultaneously. Experience liaising with local authorities, the Environment Agency, Lead Local Flood Authorities and other approval bodies will be highly advantageous. This position would suit an experienced Civil Engineer with approximately five to ten years' experience who is either Chartered or working towards Chartership through the ICE. The successful candidate will be looking for a role that offers greater responsibility, leadership opportunities and a clear progression route towards Principal Engineer or Team Leader level. In return, you will join a Consultancy that combines the technical expertise and project diversity of a larger business with the flexibility, approachability and close-knit culture of an independent practice. Alongside a varied workload and significant client exposure, you will have the opportunity to influence project delivery, mentor junior engineers and play a key role in the future growth of the Civil Engineering team. For more information about this role, please contact Sam at Calibre Search or click apply. Calibre Search promote equality in the workplace and we welcome applications from all suitably skilled or qualified candidates regardless of their sex, race, disability, religion/beliefs, sexual orientation or age. We act as both an employment agency and employment business.
Jun 14, 2026
Full time
Senior Civil Design Engineer This is an opportunity to join a well-established independent Consultancy that has been delivering Civil, Structural and Geo-Environmental Engineering solutions for over 35 years. With offices in Yorkshire and projects delivered nationwide, the Consultancy has developed an enviable reputation for providing practical, commercially focused engineering advice across the residential, commercial, leisure and industrial sectors. A significant proportion of its work comes from repeat business and long-standing client relationships, built on a straightforward approach, trusted technical advice and a genuine commitment to adding value throughout the design process. The team takes pride in developing lean, efficient engineering solutions rather than simply over-designing schemes, working closely with clients, architects and contractors to overcome site constraints, improve development potential and deliver the most effective outcome possible. Supported by an in-house Civil, Structural and Geo-Environmental capability, projects benefit from a highly coordinated approach from initial concept through to construction. As a Senior Civil Engineer, you will take a leading role in the delivery of infrastructure projects, managing schemes from concept through to completion whilst supporting the continued growth and development of the Civil Engineering team. Working closely with Directors and Associates, you will provide technical leadership across a varied portfolio of projects whilst maintaining responsibility for project delivery, client relationships and commercial performance. You will oversee the design and coordination of highways, drainage and development infrastructure schemes, including site appraisals, drainage strategies, Flood Risk Assessments, SuDS assessments, site levels design, cut and fill analysis, private and adoptable drainage systems, highway designs, earthworks strategies and external works packages. The role will also involve securing technical approvals through Section 104, 106, 38 and 278 agreements whilst working closely with local authorities, water companies, Lead Local Flood Authorities and other stakeholders. You will play a key role throughout the project lifecycle, contributing from initial feasibility and concept design through planning, detailed design and construction support. You will be expected to identify practical and cost-effective engineering solutions, challenge layouts where necessary and help clients maximise the potential of their developments whilst maintaining compliance with current standards and legislation. Alongside project delivery responsibilities, you will act as a key point of contact for clients, lead project meetings, contribute to fee proposals and business development activities and help strengthen existing client relationships. You will also provide mentorship and technical support to Graduate Engineers, Project Engineers and Technicians, supporting their progression towards professional qualifications and helping to maintain high technical standards across the team. Applicants should be degree qualified in Civil Engineering and possess strong experience delivering infrastructure and drainage designs within a Consultancy environment. A thorough understanding of development-led Civil Engineering projects is required, together with experience in highways design, drainage strategies, SuDS and technical approval processes including Sections 38, 278, 104 and 106 agreements. You will be proficient in Civil 3D and MicroDrainage or InfoDrainage and be comfortable managing multiple projects simultaneously. Experience liaising with local authorities, the Environment Agency, Lead Local Flood Authorities and other approval bodies will be highly advantageous. This position would suit an experienced Civil Engineer with approximately five to ten years' experience who is either Chartered or working towards Chartership through the ICE. The successful candidate will be looking for a role that offers greater responsibility, leadership opportunities and a clear progression route towards Principal Engineer or Team Leader level. In return, you will join a Consultancy that combines the technical expertise and project diversity of a larger business with the flexibility, approachability and close-knit culture of an independent practice. Alongside a varied workload and significant client exposure, you will have the opportunity to influence project delivery, mentor junior engineers and play a key role in the future growth of the Civil Engineering team. For more information about this role, please contact Sam at Calibre Search or click apply. Calibre Search promote equality in the workplace and we welcome applications from all suitably skilled or qualified candidates regardless of their sex, race, disability, religion/beliefs, sexual orientation or age. We act as both an employment agency and employment business.
PRINCIPAL DESIGN MANAGER - WATER NON-INFRASTRUCTURE Location: Leeds / Tamworth Salary: 70,000 - 85,000 An exciting opportunity has arisen for an experienced Principal Design Manager to take technical leadership across water non-infrastructure projects within the UK water sector. This Principal Design Manager role offers real influence, client exposure and the chance to lead multidisciplinary engineering teams delivering complex framework projects. A growing engineering consultancy is seeking a Principal Design Manager to lead the delivery of water non-infrastructure projects for a major UK water utility framework. As a Principal Design Manager, you will provide technical leadership across civil, mechanical, electrical and process engineering teams while ensuring projects are delivered safely, efficiently and to the highest technical standards. The client's offices are based in Tamworth and require attendance one to two days per week. With this level of flexibility, candidates based across Leeds, Yorkshire, the Midlands, North West or London are encouraged to apply. Key Responsibilities Lead design delivery across a portfolio of water non-infrastructure projects Coordinate multidisciplinary engineering teams across civil, mechanical, electrical and process disciplines Develop and manage design programmes across multiple projects Review and approve design deliverables to ensure compliance with industry standards and client specifications Act as the primary design interface with the water utility client Support project managers with budgets, resources and design risk management Mentor engineers and design leads within the team About You Degree qualified in Civil Engineering or a related engineering discipline Chartered Engineer or working towards chartership Strong experience within the UK water sector Proven experience delivering design programmes across multiple projects Strong understanding of UK design standards, CDM regulations and water industry specifications Excellent communication and stakeholder management skills Why Apply This Principal Design Manager position offers a salary of 70,000 - 85,000 and the opportunity to play a leading role in delivering high profile water sector projects within a growing consultancy. Applicants must already have the right to work in the UK. Sponsorship is not available. Penguin Recruitment is operating as a Recruitment Agency for this position. For more information, contact Andy Hopkins, our Civil Engineering specialist with over 30 years' recruitment experience.
Jun 14, 2026
Full time
PRINCIPAL DESIGN MANAGER - WATER NON-INFRASTRUCTURE Location: Leeds / Tamworth Salary: 70,000 - 85,000 An exciting opportunity has arisen for an experienced Principal Design Manager to take technical leadership across water non-infrastructure projects within the UK water sector. This Principal Design Manager role offers real influence, client exposure and the chance to lead multidisciplinary engineering teams delivering complex framework projects. A growing engineering consultancy is seeking a Principal Design Manager to lead the delivery of water non-infrastructure projects for a major UK water utility framework. As a Principal Design Manager, you will provide technical leadership across civil, mechanical, electrical and process engineering teams while ensuring projects are delivered safely, efficiently and to the highest technical standards. The client's offices are based in Tamworth and require attendance one to two days per week. With this level of flexibility, candidates based across Leeds, Yorkshire, the Midlands, North West or London are encouraged to apply. Key Responsibilities Lead design delivery across a portfolio of water non-infrastructure projects Coordinate multidisciplinary engineering teams across civil, mechanical, electrical and process disciplines Develop and manage design programmes across multiple projects Review and approve design deliverables to ensure compliance with industry standards and client specifications Act as the primary design interface with the water utility client Support project managers with budgets, resources and design risk management Mentor engineers and design leads within the team About You Degree qualified in Civil Engineering or a related engineering discipline Chartered Engineer or working towards chartership Strong experience within the UK water sector Proven experience delivering design programmes across multiple projects Strong understanding of UK design standards, CDM regulations and water industry specifications Excellent communication and stakeholder management skills Why Apply This Principal Design Manager position offers a salary of 70,000 - 85,000 and the opportunity to play a leading role in delivering high profile water sector projects within a growing consultancy. Applicants must already have the right to work in the UK. Sponsorship is not available. Penguin Recruitment is operating as a Recruitment Agency for this position. For more information, contact Andy Hopkins, our Civil Engineering specialist with over 30 years' recruitment experience.
Principal Flood Risk and Hydraulic Modelling Consultant Location: Cambridge Salary: 60,000 - 68,000 Ready to lead complex modelling projects while shaping the growth of a regional water team? This Principal Flood Risk and Hydraulic Modelling Consultant opportunity in Cambridge offers technical authority, client influence and clear long-term progression. A growing environmental consultancy is strengthening its senior capability in Cambridge. As a Principal Flood Risk and Hydraulic Modelling Consultant, you will take ownership of flood risk assessments, hydraulic modelling studies and water environment reporting across residential, commercial and infrastructure schemes. The Principal Flood Risk and Hydraulic Modelling Consultant will oversee hydrological analysis using FEH, ReFH2 and WINFAP, and manage hydraulic modelling using HEC RAS, TUFLOW, ESTRY or Flood Modeller. This Principal Flood Risk and Hydraulic Modelling Consultant role combines hands-on technical delivery with mentoring, stakeholder engagement and commercial awareness. Flexible working is available with a balanced office and home approach. Key responsibilities Lead hydrological and hydraulic modelling studies Prepare Flood Risk Assessments and ES chapters Liaise with regulators, clients and multidisciplinary teams Mentor junior consultants and review technical outputs Support fee proposals, budgeting and project planning Candidate requirements Minimum seven years' flood risk and modelling experience Strong technical capability across modelling platforms Confident report writer and client communicator Chartered or working towards CIWEM or similar Why apply This Principal Flood Risk and Hydraulic Modelling Consultant position offers a salary of 60,000 - 75,000 alongside structured CPD, professional fee support and genuine progression. Applicants must already have the right to work in the UK. Sponsorship is not available. Penguin Recruitment is operating as a Recruitment Agency for this position. For more information, contact Andy Hopkins, our Civil Engineering specialist with over 30 years' recruitment experience.
Jun 13, 2026
Full time
Principal Flood Risk and Hydraulic Modelling Consultant Location: Cambridge Salary: 60,000 - 68,000 Ready to lead complex modelling projects while shaping the growth of a regional water team? This Principal Flood Risk and Hydraulic Modelling Consultant opportunity in Cambridge offers technical authority, client influence and clear long-term progression. A growing environmental consultancy is strengthening its senior capability in Cambridge. As a Principal Flood Risk and Hydraulic Modelling Consultant, you will take ownership of flood risk assessments, hydraulic modelling studies and water environment reporting across residential, commercial and infrastructure schemes. The Principal Flood Risk and Hydraulic Modelling Consultant will oversee hydrological analysis using FEH, ReFH2 and WINFAP, and manage hydraulic modelling using HEC RAS, TUFLOW, ESTRY or Flood Modeller. This Principal Flood Risk and Hydraulic Modelling Consultant role combines hands-on technical delivery with mentoring, stakeholder engagement and commercial awareness. Flexible working is available with a balanced office and home approach. Key responsibilities Lead hydrological and hydraulic modelling studies Prepare Flood Risk Assessments and ES chapters Liaise with regulators, clients and multidisciplinary teams Mentor junior consultants and review technical outputs Support fee proposals, budgeting and project planning Candidate requirements Minimum seven years' flood risk and modelling experience Strong technical capability across modelling platforms Confident report writer and client communicator Chartered or working towards CIWEM or similar Why apply This Principal Flood Risk and Hydraulic Modelling Consultant position offers a salary of 60,000 - 75,000 alongside structured CPD, professional fee support and genuine progression. Applicants must already have the right to work in the UK. Sponsorship is not available. Penguin Recruitment is operating as a Recruitment Agency for this position. For more information, contact Andy Hopkins, our Civil Engineering specialist with over 30 years' recruitment experience.
Graduate Engineer - Great Yarmouth, Sizewell B and Sizewell C. We are looking for talented engineers who are graduating, or are recently graduated, to join the Risktec team at our Office in Great Yarmouth, Sizewell B & Sizewell C Nuclear Power Stations. Candidates must have a clear interest in a career in the nuclear industry and has a drive to work and learn valuable engineering skills in a dynamic environment. We require a Graduate Engineer, who is local to the area or is genuinely willing to relocate to this area, this is vital as commuting between the 3 locations requires you to be in situ to the location. No hybrid working is offered for this role. The ideal Graduate will work alongside experienced Systems Engineers to support the safe and reliable operation of several complex engineering systems on site. Disciplines Considered We will consider engineers who are graduating in Civil engineering, or have graduated in the following disciplines at minimum BEng or BSc level: Electrical and Electronic Engineering C&I Control and Instrumentation Mechanical Engineering Chemical Engineering Physics and Nuclear Physics Other disciplines where modules have been covered in Nuclear Operations/Engineering will also be considered. Engineers who have been graduated for over 1 year and have relevant experience will also be considered. Duration of Position Full-time (38h/week) with an initial fixed duration of 1 years with a view to make permanent. The Role We are seeking talented engineers who are graduating or have recently graduated to join our collaborative team based in Great Yarmouth and onsite at Sizewell B/C. The successful candidates will support the delivery of construction engineering, safety case updates and project management to several major projects within the nuclear power generation sector. Such projects include site wide modifications at Sizewell B, civil engineering projects to support the construction of Sizewell C and safety case work for EDF Design Authority. Across the Risktec south of England nuclear wider team individuals are involved in work supporting commissioning activities at Hinkley Point C and safety case documentation for Small Module Reactor Generic Design Assessments. Role Description and Responsibilities This role provides an opportunity to be part of an exciting, dynamic, and rapidly growing nuclear team across the south of England. Typical responsibilities may include: Supporting the delivery of major construction-based safety cases. Providing specialist civil/structural input and advice to resolve construction problems. Facilitating hazard identification in cooperation with CDM regulations and optioneering workshops. Production of formal technical reports, safety cases and other project deliverables on time and to budget. Implementation of modifications to site, including Supporting construction team and client during the construction process through problem solving. Supporting the build of safety case through justification of design. Reviewing design proposals and producing design substantiation reports. Authoring testing and commissioning strategies and functional test procedures. Support to plant operability, including: Condition monitoring and identification of plant faults. Supporting equipment reliability reviews, including plant walk downs. Reviewing maintenance routines/strategy. Management of projects, project teams and interfacing with clients. As part of this role, you will gain a broad and in depth understanding of risk management, design and operations within a large generating site. Security Clearance Checks Due to the nature of the work, candidates must have a suitable background and a valid UK working status that will allow them to achieve UK security clearance. (please note that this is very difficult to achieve within the timescales for non-UK nationals, and all applicants will be subject to a screening process prior to interview to ensure that you meet the security clearance criteria). By applying for this role, you will be agreeing to undertake initial security clearance screening and will be asked to provide evidence of your eligibility for security clearance. Other Requirements This opportunity has high visibility and maintains a valuable profile for us through which you will form part of our client facing team as such, excellent interpersonal and written skills are required. It is also essential that you have your own transport and a clean driving license. Salary Package A competitive package is offered with benefits. How to Apply We are looking for driven and conscientious individuals to form a part of one of our site based teams. If you feel you have the ability, aptitude and ambition to join us, please send us your CV and cover letter including your achievements and background stating why you are a strong fit for this role. Successful Graduate The successful graduate will be based at Great Yarmouth Risktec, Sizewell B and Sizewell C Nuclear Power Stations, working for our major nuclear client and you will be mentored and managed by Principal Engineers from Risktec Solutions Ltd. Travel and Location This role is based at Great Yarmouth Risktec, and you will be expected to work between this site and Sizewell B and Sizewell C Power Stations. Please ensure that you have made yourself aware of these locations and that you have considered your travel and accommodation arrangements to and from work when applying. No hybrid working is offered for this role. If successful to interview you will be expected to travel to our Great Yarmouth to attend an interview.
Jun 13, 2026
Full time
Graduate Engineer - Great Yarmouth, Sizewell B and Sizewell C. We are looking for talented engineers who are graduating, or are recently graduated, to join the Risktec team at our Office in Great Yarmouth, Sizewell B & Sizewell C Nuclear Power Stations. Candidates must have a clear interest in a career in the nuclear industry and has a drive to work and learn valuable engineering skills in a dynamic environment. We require a Graduate Engineer, who is local to the area or is genuinely willing to relocate to this area, this is vital as commuting between the 3 locations requires you to be in situ to the location. No hybrid working is offered for this role. The ideal Graduate will work alongside experienced Systems Engineers to support the safe and reliable operation of several complex engineering systems on site. Disciplines Considered We will consider engineers who are graduating in Civil engineering, or have graduated in the following disciplines at minimum BEng or BSc level: Electrical and Electronic Engineering C&I Control and Instrumentation Mechanical Engineering Chemical Engineering Physics and Nuclear Physics Other disciplines where modules have been covered in Nuclear Operations/Engineering will also be considered. Engineers who have been graduated for over 1 year and have relevant experience will also be considered. Duration of Position Full-time (38h/week) with an initial fixed duration of 1 years with a view to make permanent. The Role We are seeking talented engineers who are graduating or have recently graduated to join our collaborative team based in Great Yarmouth and onsite at Sizewell B/C. The successful candidates will support the delivery of construction engineering, safety case updates and project management to several major projects within the nuclear power generation sector. Such projects include site wide modifications at Sizewell B, civil engineering projects to support the construction of Sizewell C and safety case work for EDF Design Authority. Across the Risktec south of England nuclear wider team individuals are involved in work supporting commissioning activities at Hinkley Point C and safety case documentation for Small Module Reactor Generic Design Assessments. Role Description and Responsibilities This role provides an opportunity to be part of an exciting, dynamic, and rapidly growing nuclear team across the south of England. Typical responsibilities may include: Supporting the delivery of major construction-based safety cases. Providing specialist civil/structural input and advice to resolve construction problems. Facilitating hazard identification in cooperation with CDM regulations and optioneering workshops. Production of formal technical reports, safety cases and other project deliverables on time and to budget. Implementation of modifications to site, including Supporting construction team and client during the construction process through problem solving. Supporting the build of safety case through justification of design. Reviewing design proposals and producing design substantiation reports. Authoring testing and commissioning strategies and functional test procedures. Support to plant operability, including: Condition monitoring and identification of plant faults. Supporting equipment reliability reviews, including plant walk downs. Reviewing maintenance routines/strategy. Management of projects, project teams and interfacing with clients. As part of this role, you will gain a broad and in depth understanding of risk management, design and operations within a large generating site. Security Clearance Checks Due to the nature of the work, candidates must have a suitable background and a valid UK working status that will allow them to achieve UK security clearance. (please note that this is very difficult to achieve within the timescales for non-UK nationals, and all applicants will be subject to a screening process prior to interview to ensure that you meet the security clearance criteria). By applying for this role, you will be agreeing to undertake initial security clearance screening and will be asked to provide evidence of your eligibility for security clearance. Other Requirements This opportunity has high visibility and maintains a valuable profile for us through which you will form part of our client facing team as such, excellent interpersonal and written skills are required. It is also essential that you have your own transport and a clean driving license. Salary Package A competitive package is offered with benefits. How to Apply We are looking for driven and conscientious individuals to form a part of one of our site based teams. If you feel you have the ability, aptitude and ambition to join us, please send us your CV and cover letter including your achievements and background stating why you are a strong fit for this role. Successful Graduate The successful graduate will be based at Great Yarmouth Risktec, Sizewell B and Sizewell C Nuclear Power Stations, working for our major nuclear client and you will be mentored and managed by Principal Engineers from Risktec Solutions Ltd. Travel and Location This role is based at Great Yarmouth Risktec, and you will be expected to work between this site and Sizewell B and Sizewell C Power Stations. Please ensure that you have made yourself aware of these locations and that you have considered your travel and accommodation arrangements to and from work when applying. No hybrid working is offered for this role. If successful to interview you will be expected to travel to our Great Yarmouth to attend an interview.
Principal Hydraulic Modeller Location: Sheffield Salary: 55,000 - 68,000 Ready to lead modelling strategy while building and mentoring a high-performing team? This Principal Hydraulic Modeller opportunity in Sheffield offers technical authority, influence and long-term progression within a growing consultancy. A specialist water consultancy delivering wastewater and integrated hydraulic modelling projects is strengthening its senior capability. As a Principal Hydraulic Modeller, you will develop, calibrate and validate hydraulic models, support root cause analysis and guide solution development across complex programmes. The Principal Hydraulic Modeller will provide technical leadership, coach modellers and ensure modelling outputs meet high quality and regulatory standards. This Principal Hydraulic Modeller role combines hands-on modelling with stakeholder engagement and commercial awareness. A minimum of three days per week will be office-based in Sheffield, with flexibility built around project requirements. Key responsibilities Develop, calibrate and verify hydraulic models Lead technical mentoring and internal training Support TOTEX and solution development strategies Manage stakeholders and communicate modelling risk Drive quality assurance and continuous improvement Candidate requirements Degree qualified with substantial modelling experience Strong expertise in InfoWorks ICM and associated tools Experience in river and wastewater modelling Confident using Excel including data interrogation Chartered or working towards Chartership desirable Why apply This Principal Hydraulic Modeller role offers structured CPD and leadership development. The salary for this Principal Hydraulic Modeller position is 55,000 - 68,000, alongside flexible working, strong team culture and long-term career progression. Applicants must already have the right to work in the UK. Sponsorship is not available. Penguin Recruitment is operating as a Recruitment Agency for this position. For more information, contact Andy Hopkins, our Civil Engineering specialist with over 30 years' recruitment experience.
Jun 13, 2026
Full time
Principal Hydraulic Modeller Location: Sheffield Salary: 55,000 - 68,000 Ready to lead modelling strategy while building and mentoring a high-performing team? This Principal Hydraulic Modeller opportunity in Sheffield offers technical authority, influence and long-term progression within a growing consultancy. A specialist water consultancy delivering wastewater and integrated hydraulic modelling projects is strengthening its senior capability. As a Principal Hydraulic Modeller, you will develop, calibrate and validate hydraulic models, support root cause analysis and guide solution development across complex programmes. The Principal Hydraulic Modeller will provide technical leadership, coach modellers and ensure modelling outputs meet high quality and regulatory standards. This Principal Hydraulic Modeller role combines hands-on modelling with stakeholder engagement and commercial awareness. A minimum of three days per week will be office-based in Sheffield, with flexibility built around project requirements. Key responsibilities Develop, calibrate and verify hydraulic models Lead technical mentoring and internal training Support TOTEX and solution development strategies Manage stakeholders and communicate modelling risk Drive quality assurance and continuous improvement Candidate requirements Degree qualified with substantial modelling experience Strong expertise in InfoWorks ICM and associated tools Experience in river and wastewater modelling Confident using Excel including data interrogation Chartered or working towards Chartership desirable Why apply This Principal Hydraulic Modeller role offers structured CPD and leadership development. The salary for this Principal Hydraulic Modeller position is 55,000 - 68,000, alongside flexible working, strong team culture and long-term career progression. Applicants must already have the right to work in the UK. Sponsorship is not available. Penguin Recruitment is operating as a Recruitment Agency for this position. For more information, contact Andy Hopkins, our Civil Engineering specialist with over 30 years' recruitment experience.
We are recruiting for an experienced Project Manager to join a principal contractor delivering a major food manufacturing construction scheme in Barnsley. The project is a high-value 15m- 30m development involving demolition, new build and fit-out , currently at design and procurement stage . This is an excellent opportunity for a construction professional with a strong background in food manufacturing environments , who can take ownership of project delivery from inception through to completion while ensuring the highest standards of safety, quality, programme control and stakeholder communication. Role Overview The successful Project Manager will lead and manage specialist food manufacturing construction projects on behalf of the principal contractor, ensuring works are delivered on time, within budget and to the required quality and compliance standards . The role will involve full lifecycle project leadership, from planning and procurement through execution, reporting, risk management and handover. Key Responsibilities Project Planning & Delivery Develop detailed project plans, programmes and resource allocation strategies. Define project scope, objectives and deliverables in collaboration with key stakeholders. Manage all phases of the construction project from pre-construction through to completion and handover. Oversee demolition, new build and fit-out activities while maintaining progress against programme. Minimum 7 years' experience in food manufacturing construction project management. Proven track record delivering complex projects as a main contractor Experience managing projects valued at over 10m . Strong experience managing budgets, schedules and multidisciplinary teams. Experience across the full project lifecycle, from pre-construction through to handover. Experience managing shutdowns, phased works and commissioning in live or regulated environments. Key Skills & Competencies Strong strategic health and safety awareness. Budget ownership and commercial control capability. Programme development and risk management expertise. Extensive experience in food manufacturing builds or refurbishments. Strong client leadership and decision-making ability. Excellent communication, coordination and stakeholder management skills. Qualifications & Certifications NVQ Level 6 or equivalent in Construction Management, Civil Engineering or a related discipline is preferred. CSCS Card (Manager level). SMSTS (Site Management Safety Training Scheme). TWC (Temporary Works Coordinator). First Aid at Work certification UKATA Asbestos Training Please click here to find out more about our Key Information Documents. Please note that the documents provided contain generic information. If we are successful in finding you an assignment, you will receive a Key Information Document which will be specific to the vendor set-up you have chosen and your placement. To find out more about Progressive please visit (url removed) Progressive Recruitment, a trading division of SThree Partnership LLP is acting as an Employment Business in relation to this vacancy Registered office 8 Bishopsgate, London, EC2N 4BQ, United Kingdom Partnership Number OC(phone number removed) England and Wales
Jun 13, 2026
Contractor
We are recruiting for an experienced Project Manager to join a principal contractor delivering a major food manufacturing construction scheme in Barnsley. The project is a high-value 15m- 30m development involving demolition, new build and fit-out , currently at design and procurement stage . This is an excellent opportunity for a construction professional with a strong background in food manufacturing environments , who can take ownership of project delivery from inception through to completion while ensuring the highest standards of safety, quality, programme control and stakeholder communication. Role Overview The successful Project Manager will lead and manage specialist food manufacturing construction projects on behalf of the principal contractor, ensuring works are delivered on time, within budget and to the required quality and compliance standards . The role will involve full lifecycle project leadership, from planning and procurement through execution, reporting, risk management and handover. Key Responsibilities Project Planning & Delivery Develop detailed project plans, programmes and resource allocation strategies. Define project scope, objectives and deliverables in collaboration with key stakeholders. Manage all phases of the construction project from pre-construction through to completion and handover. Oversee demolition, new build and fit-out activities while maintaining progress against programme. Minimum 7 years' experience in food manufacturing construction project management. Proven track record delivering complex projects as a main contractor Experience managing projects valued at over 10m . Strong experience managing budgets, schedules and multidisciplinary teams. Experience across the full project lifecycle, from pre-construction through to handover. Experience managing shutdowns, phased works and commissioning in live or regulated environments. Key Skills & Competencies Strong strategic health and safety awareness. Budget ownership and commercial control capability. Programme development and risk management expertise. Extensive experience in food manufacturing builds or refurbishments. Strong client leadership and decision-making ability. Excellent communication, coordination and stakeholder management skills. Qualifications & Certifications NVQ Level 6 or equivalent in Construction Management, Civil Engineering or a related discipline is preferred. CSCS Card (Manager level). SMSTS (Site Management Safety Training Scheme). TWC (Temporary Works Coordinator). First Aid at Work certification UKATA Asbestos Training Please click here to find out more about our Key Information Documents. Please note that the documents provided contain generic information. If we are successful in finding you an assignment, you will receive a Key Information Document which will be specific to the vendor set-up you have chosen and your placement. To find out more about Progressive please visit (url removed) Progressive Recruitment, a trading division of SThree Partnership LLP is acting as an Employment Business in relation to this vacancy Registered office 8 Bishopsgate, London, EC2N 4BQ, United Kingdom Partnership Number OC(phone number removed) England and Wales
WHAT IS IN IT FOR YOU? • Permanent role • Northamptonshire location • Salary - £35k circa • Hours of work Monday to Friday 9am 5:30pm • Holiday entitlement: 23 days per annum (plus usual public holidays). After 3 years service, an additional day s holiday for each year of service up to a maximum of 25 days. • Membership of the Company s pension scheme 5% contribution • Group life assurance THE BUSINESS Are you a new graduate or recently qualified graduate who specialises in Structural Design Engineering? Are you proficient with the use of finite element analysis? Are you skilled with AutoCAD and additional design packages? Are you seeking to start your career with a renowned client whose roots stretch back to the 19th century? If the answer to the above is YES, we would love to hear from you today. We are seeking to recruit a Graduate Design Engineer for our client based in Northamptonshire. Our client has a long-distinguished history in the construction of landmark structures around the world, particularly iconic bridges and buildings. The organisation s principal focus now is the design, manufacture and operation of specialist equipment and temporary works for the construction of bridges, buildings, offshore structures, refineries, power stations and industrial plants. They have particular expertise in the erection of long span suspension and cable stayed bridges and in the engineering for specialist modular construction including heavy lifting and skidding operations. You will be working within a team of engineers and CAD technicians, carrying out conceptual and detailed design of permanent and temporary structures and equipment, particularly related to construction engineering of bridges, tower systems and complex structures. THE ROLE • Conceptual and detailed design of permanent and temporary structures, particularly in steel • Conceptual and detailed design of specialist equipment, particularly related to heavy lifting and moving projects • Production of animations, 3D models, and drawings using Inventor software • Preparation of detailed calculations using computer program Excel • Static analyses of structures using structural analysis (FEA) computer programs • Preparation of sketches and drawings using computer program AutoCAD • Development of standard spreadsheet solutions suitable for use with Excel THE PERSON Essential: • A bachelor s degree in an engineering discipline (civil, Structural, mechanical or similar) • Experience in the use of computer drafting software, preferably AutoCAD • Experience in the use of finite element analysis computer programs • Good general IT skills (Microsoft word, Excel, Email Systems) • Good presentation and communication skills Preferable: • Experience in analysis and design of structures, particularly in steel • Experience in the use of 3D modelling software preferably Inventor, however full training will be provided • Some practical experience TO APPLY Please send your updated CV to Harry Mann or apply direct by calling Westray Recruitment Group
Jun 13, 2026
Full time
WHAT IS IN IT FOR YOU? • Permanent role • Northamptonshire location • Salary - £35k circa • Hours of work Monday to Friday 9am 5:30pm • Holiday entitlement: 23 days per annum (plus usual public holidays). After 3 years service, an additional day s holiday for each year of service up to a maximum of 25 days. • Membership of the Company s pension scheme 5% contribution • Group life assurance THE BUSINESS Are you a new graduate or recently qualified graduate who specialises in Structural Design Engineering? Are you proficient with the use of finite element analysis? Are you skilled with AutoCAD and additional design packages? Are you seeking to start your career with a renowned client whose roots stretch back to the 19th century? If the answer to the above is YES, we would love to hear from you today. We are seeking to recruit a Graduate Design Engineer for our client based in Northamptonshire. Our client has a long-distinguished history in the construction of landmark structures around the world, particularly iconic bridges and buildings. The organisation s principal focus now is the design, manufacture and operation of specialist equipment and temporary works for the construction of bridges, buildings, offshore structures, refineries, power stations and industrial plants. They have particular expertise in the erection of long span suspension and cable stayed bridges and in the engineering for specialist modular construction including heavy lifting and skidding operations. You will be working within a team of engineers and CAD technicians, carrying out conceptual and detailed design of permanent and temporary structures and equipment, particularly related to construction engineering of bridges, tower systems and complex structures. THE ROLE • Conceptual and detailed design of permanent and temporary structures, particularly in steel • Conceptual and detailed design of specialist equipment, particularly related to heavy lifting and moving projects • Production of animations, 3D models, and drawings using Inventor software • Preparation of detailed calculations using computer program Excel • Static analyses of structures using structural analysis (FEA) computer programs • Preparation of sketches and drawings using computer program AutoCAD • Development of standard spreadsheet solutions suitable for use with Excel THE PERSON Essential: • A bachelor s degree in an engineering discipline (civil, Structural, mechanical or similar) • Experience in the use of computer drafting software, preferably AutoCAD • Experience in the use of finite element analysis computer programs • Good general IT skills (Microsoft word, Excel, Email Systems) • Good presentation and communication skills Preferable: • Experience in analysis and design of structures, particularly in steel • Experience in the use of 3D modelling software preferably Inventor, however full training will be provided • Some practical experience TO APPLY Please send your updated CV to Harry Mann or apply direct by calling Westray Recruitment Group
Apex Resources Limited are on the lookout for a 278 Civils Supervisor in Haslingden, BB4 Duties: To be considered, you will come from a Highways, Utilities or Civil Engineering background and hold relevant Supervisor accreditation under the New Roads and Street Works Act 1991 (NRSWA), with demonstrable experience supervising Section 278 and highway works. The Street Works Supervisor will be responsible for overseeing and monitoring street and highway works to ensure full compliance with statutory requirements, contract drawings, specifications, permits, and safety standards. The role will include supervising site teams and subcontractors undertaking works on the public highway. Key Accountabilities (including but not limited to): Health, Safety & Environment: Ensuring works comply with the New Roads and Street Works Act 1991 and the Traffic Management Act 2004 Monitoring compliance with Street Works permits and conditions issued by the Highway Authority Reviewing and checking RAMS and Traffic Management Plans (TMPs), ensuring they are communicated effectively to operatives Carrying out regular site inspections to ensure safe systems of work and zero tolerance of unsafe practices Ensuring signing, lighting and guarding are compliant with Chapter 8 requirements Liaising with the Principal Contractor and Local Authority to ensure permits are received, varied, or closed out correctly and on time Programme & Coordination: Monitoring street works progress in line with permit durations and agreed programmes Identifying risks to programme, including overrun risks, and escalating where necessary Coordinating subcontractors and operatives to minimise disruption to the public and network Supporting collaborative working with utilities, local authorities and stakeholders Quality Management: Ensuring reinstatements comply with the Specification Conducting regular inspections to ensure materials and workmanship meet required standards Recording and managing defects, ensuring timely remedial works Maintaining accurate records including site photographs, inspection reports and compliance documentation Supporting quality handover documentation where required Skills: Strong knowledge of NRSWA legislation and permit schemes Good communication, leadership and stakeholder management skills Ability to challenge unsafe or non-compliant practices Experience using Street Manager and permit management systems Competent in reviewing drawings and traffic management layouts Good record-keeping and reporting skills Qualifications: NRSWA Supervisor Accreditation (Units ) IOSH Managing Safely or SSSTS/SMSTS Valid CSCS Card (Supervisory level) First Aid at Work (desirable) Temporary Works awareness (desirable) If you are interested and available, please apply with your most up to date CV and all the office on (phone number removed) and ask for Jack or Glenn
Jun 13, 2026
Seasonal
Apex Resources Limited are on the lookout for a 278 Civils Supervisor in Haslingden, BB4 Duties: To be considered, you will come from a Highways, Utilities or Civil Engineering background and hold relevant Supervisor accreditation under the New Roads and Street Works Act 1991 (NRSWA), with demonstrable experience supervising Section 278 and highway works. The Street Works Supervisor will be responsible for overseeing and monitoring street and highway works to ensure full compliance with statutory requirements, contract drawings, specifications, permits, and safety standards. The role will include supervising site teams and subcontractors undertaking works on the public highway. Key Accountabilities (including but not limited to): Health, Safety & Environment: Ensuring works comply with the New Roads and Street Works Act 1991 and the Traffic Management Act 2004 Monitoring compliance with Street Works permits and conditions issued by the Highway Authority Reviewing and checking RAMS and Traffic Management Plans (TMPs), ensuring they are communicated effectively to operatives Carrying out regular site inspections to ensure safe systems of work and zero tolerance of unsafe practices Ensuring signing, lighting and guarding are compliant with Chapter 8 requirements Liaising with the Principal Contractor and Local Authority to ensure permits are received, varied, or closed out correctly and on time Programme & Coordination: Monitoring street works progress in line with permit durations and agreed programmes Identifying risks to programme, including overrun risks, and escalating where necessary Coordinating subcontractors and operatives to minimise disruption to the public and network Supporting collaborative working with utilities, local authorities and stakeholders Quality Management: Ensuring reinstatements comply with the Specification Conducting regular inspections to ensure materials and workmanship meet required standards Recording and managing defects, ensuring timely remedial works Maintaining accurate records including site photographs, inspection reports and compliance documentation Supporting quality handover documentation where required Skills: Strong knowledge of NRSWA legislation and permit schemes Good communication, leadership and stakeholder management skills Ability to challenge unsafe or non-compliant practices Experience using Street Manager and permit management systems Competent in reviewing drawings and traffic management layouts Good record-keeping and reporting skills Qualifications: NRSWA Supervisor Accreditation (Units ) IOSH Managing Safely or SSSTS/SMSTS Valid CSCS Card (Supervisory level) First Aid at Work (desirable) Temporary Works awareness (desirable) If you are interested and available, please apply with your most up to date CV and all the office on (phone number removed) and ask for Jack or Glenn
PRINCIPAL DESIGN MANAGER - WATER NON-INFRASTRUCTURE Location: Leicester / Tamworth Salary: 70,000 - 85,000 An exciting opportunity has arisen for an experienced Principal Design Manager to take technical leadership across water non-infrastructure projects within the UK water sector. This Principal Design Manager role offers real influence, client exposure and the chance to lead multidisciplinary engineering teams delivering complex framework projects. A growing engineering consultancy is seeking a Principal Design Manager to lead the delivery of water non-infrastructure projects for a major UK water utility framework. As a Principal Design Manager, you will provide technical leadership across civil, mechanical, electrical and process engineering teams while ensuring projects are delivered safely, efficiently and to the highest technical standards. The client's offices are based in Tamworth and require attendance one to two days per week. With this level of flexibility, candidates based across Leicester, the Midlands, North West, Yorkshire or London are encouraged to apply. Key Responsibilities Lead design delivery across a portfolio of water non-infrastructure projects Coordinate multidisciplinary engineering teams across civil, mechanical, electrical and process disciplines Develop and manage design programmes across multiple projects Review and approve design deliverables to ensure compliance with industry standards and client specifications Act as the primary design interface with the water utility client Support project managers with budgets, resources and design risk management Mentor engineers and design leads within the team About You Degree qualified in Civil Engineering or a related engineering discipline Chartered Engineer or working towards chartership Strong experience within the UK water sector Proven experience delivering design programmes across multiple projects Strong understanding of UK design standards, CDM regulations and water industry specifications Excellent communication and stakeholder management skills Why Apply This Principal Design Manager position offers a salary of 70,000 - 85,000 and the opportunity to play a leading role in delivering high profile water sector projects within a growing consultancy. Applicants must already have the right to work in the UK. Sponsorship is not available. Penguin Recruitment is operating as a Recruitment Agency for this position. For more information, contact Andy Hopkins, our Civil Engineering specialist with over 30 years' recruitment experience.
Jun 13, 2026
Full time
PRINCIPAL DESIGN MANAGER - WATER NON-INFRASTRUCTURE Location: Leicester / Tamworth Salary: 70,000 - 85,000 An exciting opportunity has arisen for an experienced Principal Design Manager to take technical leadership across water non-infrastructure projects within the UK water sector. This Principal Design Manager role offers real influence, client exposure and the chance to lead multidisciplinary engineering teams delivering complex framework projects. A growing engineering consultancy is seeking a Principal Design Manager to lead the delivery of water non-infrastructure projects for a major UK water utility framework. As a Principal Design Manager, you will provide technical leadership across civil, mechanical, electrical and process engineering teams while ensuring projects are delivered safely, efficiently and to the highest technical standards. The client's offices are based in Tamworth and require attendance one to two days per week. With this level of flexibility, candidates based across Leicester, the Midlands, North West, Yorkshire or London are encouraged to apply. Key Responsibilities Lead design delivery across a portfolio of water non-infrastructure projects Coordinate multidisciplinary engineering teams across civil, mechanical, electrical and process disciplines Develop and manage design programmes across multiple projects Review and approve design deliverables to ensure compliance with industry standards and client specifications Act as the primary design interface with the water utility client Support project managers with budgets, resources and design risk management Mentor engineers and design leads within the team About You Degree qualified in Civil Engineering or a related engineering discipline Chartered Engineer or working towards chartership Strong experience within the UK water sector Proven experience delivering design programmes across multiple projects Strong understanding of UK design standards, CDM regulations and water industry specifications Excellent communication and stakeholder management skills Why Apply This Principal Design Manager position offers a salary of 70,000 - 85,000 and the opportunity to play a leading role in delivering high profile water sector projects within a growing consultancy. Applicants must already have the right to work in the UK. Sponsorship is not available. Penguin Recruitment is operating as a Recruitment Agency for this position. For more information, contact Andy Hopkins, our Civil Engineering specialist with over 30 years' recruitment experience.
PRINCIPAL DESIGN MANAGER - WATER NON-INFRASTRUCTURE Location: Sheffield / Tamworth Salary: 70,000 - 85,000 An exciting opportunity has arisen for an experienced Principal Design Manager to take technical leadership across water non-infrastructure projects within the UK water sector. This Principal Design Manager role offers real influence, client exposure and the chance to lead multidisciplinary engineering teams delivering complex framework projects. A growing engineering consultancy is seeking a Principal Design Manager to lead the delivery of water non-infrastructure projects for a major UK water utility framework. As a Principal Design Manager, you will provide technical leadership across civil, mechanical, electrical and process engineering teams while ensuring projects are delivered safely, efficiently and to the highest technical standards. The client's offices are based in Tamworth and require attendance one to two days per week. With this level of flexibility, candidates based across Sheffield, Yorkshire, the Midlands, North West or London are encouraged to apply. Key Responsibilities Lead design delivery across a portfolio of water non-infrastructure projects Coordinate multidisciplinary engineering teams across civil, mechanical, electrical and process disciplines Develop and manage design programmes across multiple projects Review and approve design deliverables to ensure compliance with industry standards and client specifications Act as the primary design interface with the water utility client Support project managers with budgets, resources and design risk management Mentor engineers and design leads within the team About You Degree qualified in Civil Engineering or a related engineering discipline Chartered Engineer or working towards chartership Strong experience within the UK water sector Proven experience delivering design programmes across multiple projects Strong understanding of UK design standards, CDM regulations and water industry specifications Excellent communication and stakeholder management skills Why Apply This Principal Design Manager position offers a salary of 70,000 - 85,000 and the opportunity to play a leading role in delivering high profile water sector projects within a growing consultancy. Applicants must already have the right to work in the UK. Sponsorship is not available. Penguin Recruitment is operating as a Recruitment Agency for this position. For more information, contact Andy Hopkins, our Civil Engineering specialist with over 30 years' recruitment experience.
Jun 13, 2026
Full time
PRINCIPAL DESIGN MANAGER - WATER NON-INFRASTRUCTURE Location: Sheffield / Tamworth Salary: 70,000 - 85,000 An exciting opportunity has arisen for an experienced Principal Design Manager to take technical leadership across water non-infrastructure projects within the UK water sector. This Principal Design Manager role offers real influence, client exposure and the chance to lead multidisciplinary engineering teams delivering complex framework projects. A growing engineering consultancy is seeking a Principal Design Manager to lead the delivery of water non-infrastructure projects for a major UK water utility framework. As a Principal Design Manager, you will provide technical leadership across civil, mechanical, electrical and process engineering teams while ensuring projects are delivered safely, efficiently and to the highest technical standards. The client's offices are based in Tamworth and require attendance one to two days per week. With this level of flexibility, candidates based across Sheffield, Yorkshire, the Midlands, North West or London are encouraged to apply. Key Responsibilities Lead design delivery across a portfolio of water non-infrastructure projects Coordinate multidisciplinary engineering teams across civil, mechanical, electrical and process disciplines Develop and manage design programmes across multiple projects Review and approve design deliverables to ensure compliance with industry standards and client specifications Act as the primary design interface with the water utility client Support project managers with budgets, resources and design risk management Mentor engineers and design leads within the team About You Degree qualified in Civil Engineering or a related engineering discipline Chartered Engineer or working towards chartership Strong experience within the UK water sector Proven experience delivering design programmes across multiple projects Strong understanding of UK design standards, CDM regulations and water industry specifications Excellent communication and stakeholder management skills Why Apply This Principal Design Manager position offers a salary of 70,000 - 85,000 and the opportunity to play a leading role in delivering high profile water sector projects within a growing consultancy. Applicants must already have the right to work in the UK. Sponsorship is not available. Penguin Recruitment is operating as a Recruitment Agency for this position. For more information, contact Andy Hopkins, our Civil Engineering specialist with over 30 years' recruitment experience.
Recruitment Consultant Jobs Australia UK Recruitment Consultants Wanted Are you a Recruitment Consultant in the UK thinking about relocating to Australia? We re supporting experienced UK Recruitment Consultants to secure Recruitment Consultant roles in Australia, offering not just a job, but a genuine lifestyle change. With high demand for skilled recruiters, these Australia-based Recruitment Consultant opportunities offer career growth, excellent earning potential, and a fresh start. Techforce Personnel is the fastest growing, national recruitment agency and project management firm specialising in blue and white collar recruitment. We operate across mining and resources, shutdowns, facilities maintenance, industrial services, civil construction, oil and gas sectors and healthcare and hospitality. With established operations across Perth, Adelaide, Darwin, Brisbane and Newcastle, Techforce continues to expand its footprint within the Australian market and is seeking experienced UK-based Recruitment Consultants interested in an international career move. This opportunity is ideal for consultants with experience in trades, technical, engineering, construction, industrial or energy and hospitality recruitment, who are looking to apply their skills within Australia's thriving resources sector. What to expect: Warm, live clients + immediate pipelines Basic ($70-$100k) + uncapped commissions top performers regularly $200K+ OTE Tech edge: AI sourcing, skills-based hiring tools Fast career progression + accredited training High-energy team, incentives, events & real work-life balance Focus areas - high-demand roles you're filling White Collar Mining/Process/Civil Engineers Project Controls, Planning & Cost Mining Supervisors & Superintendents Healthcare & Hospitality Administration, HR & Tech-savvy professionals Blue Collar FIFO/DIDO Operators & Trades (Heavy Diesel, Electricians, Boilermakers) Shutdown Teams & Maintenance Civil Construction & Industrial Services What you'll deliver (Full 360 ownership) Build and nurture long-term client partnerships in resources Source and develop diverse, skills-focused talent pipelines (prioritising capability over credentials) Leverage modern tools to beat competition in a tight market Consistently hit/exceed billing targets in a fast-paced environment What we're looking for Proven Senior/Principal Recruitment Consultant experience (agency background essential) Strong 360 desk management from lead generation to placement Building relationships Resilient, ambitious, team-oriented mindset Advantage : Resources sector knowledge, skills-based/AI recruitment experience Perks that keep high performers thriving Uncapped earning potential Warm portfolios & live mandates Ongoing professional development Recognition, rewards & social events Genuine work-life balance support in a high-achieving team Although Techforce is Australian-based, our UK office is available to have honest conversations about what working in Australia really looks like - the opportunities, the expectations, and the practical side of relocating - visa's and accommodation. Apply now or contact Jo Wilson in our UK office confidentially: (url removed).au
Jun 13, 2026
Full time
Recruitment Consultant Jobs Australia UK Recruitment Consultants Wanted Are you a Recruitment Consultant in the UK thinking about relocating to Australia? We re supporting experienced UK Recruitment Consultants to secure Recruitment Consultant roles in Australia, offering not just a job, but a genuine lifestyle change. With high demand for skilled recruiters, these Australia-based Recruitment Consultant opportunities offer career growth, excellent earning potential, and a fresh start. Techforce Personnel is the fastest growing, national recruitment agency and project management firm specialising in blue and white collar recruitment. We operate across mining and resources, shutdowns, facilities maintenance, industrial services, civil construction, oil and gas sectors and healthcare and hospitality. With established operations across Perth, Adelaide, Darwin, Brisbane and Newcastle, Techforce continues to expand its footprint within the Australian market and is seeking experienced UK-based Recruitment Consultants interested in an international career move. This opportunity is ideal for consultants with experience in trades, technical, engineering, construction, industrial or energy and hospitality recruitment, who are looking to apply their skills within Australia's thriving resources sector. What to expect: Warm, live clients + immediate pipelines Basic ($70-$100k) + uncapped commissions top performers regularly $200K+ OTE Tech edge: AI sourcing, skills-based hiring tools Fast career progression + accredited training High-energy team, incentives, events & real work-life balance Focus areas - high-demand roles you're filling White Collar Mining/Process/Civil Engineers Project Controls, Planning & Cost Mining Supervisors & Superintendents Healthcare & Hospitality Administration, HR & Tech-savvy professionals Blue Collar FIFO/DIDO Operators & Trades (Heavy Diesel, Electricians, Boilermakers) Shutdown Teams & Maintenance Civil Construction & Industrial Services What you'll deliver (Full 360 ownership) Build and nurture long-term client partnerships in resources Source and develop diverse, skills-focused talent pipelines (prioritising capability over credentials) Leverage modern tools to beat competition in a tight market Consistently hit/exceed billing targets in a fast-paced environment What we're looking for Proven Senior/Principal Recruitment Consultant experience (agency background essential) Strong 360 desk management from lead generation to placement Building relationships Resilient, ambitious, team-oriented mindset Advantage : Resources sector knowledge, skills-based/AI recruitment experience Perks that keep high performers thriving Uncapped earning potential Warm portfolios & live mandates Ongoing professional development Recognition, rewards & social events Genuine work-life balance support in a high-achieving team Although Techforce is Australian-based, our UK office is available to have honest conversations about what working in Australia really looks like - the opportunities, the expectations, and the practical side of relocating - visa's and accommodation. Apply now or contact Jo Wilson in our UK office confidentially: (url removed).au
Our client is a leading Piling contractor with a major Projects Division that delivers high-value multi-discipline ground engineering schemes across the UK and Ireland. They offer a range of geotechnical solutions, as well as civil engineering, marine, and tunnelling works, and we have the flexibility to act a principal contractor, joint venture partner or specialist subcontractor. Reporting to the Projects Division Estimating Manager, they are seeking an estimator who has experience in the pricing and presentation to clients of geotechnical engineering solutions (e.g., diaphragm wall construction, piling works, grouting works, etc.), and someone who is interested in pricing works where they are working collaboratively with their clients, joint venture partners, and supply chain to overcome complex multi-discipline civil engineering challenges. KEY RESPONSIBILITIES The role will cover all aspects of the preconstruction work winning phase of a project opportunity with key responsibilities including: Assisting with the management of incoming enquiries including the assessment and prioritisation of business appropriate tender opportunities. Developing appropriate opportunity bid/win strategies to suit the requirements of their clients. Collaboratively working with their technical and operations team and supply chain to prepare conforming scheme and value engineering scheme cost studies for internal governance review. Liaise with the technical, operations, and commercial teams to ensure risks are recognised and mitigation strategies are agreed at the preconstruction stage. Writing and presenting tender offers to the clients. Engaging in client interactions and tender negotiations from receipt of enquiry through to contract award and project handover to the operations team. Maintain and update the Salesforce CRM database. Engaging with and assisting the Projects Division Business Development Manager in identifying appropriate future clients and major project opportunities that would benefit from the value the division has to offer. KNOWLEDGE AND EXPERIENCE REQUIRED A relevant civil engineering degree or bias towards geotechnical engineering and professional qualification status is preferrable. Ability to discharge professional duties with integrity and ability to behave with integrity in relation to all conduct bearing upon the standing, reputation and dignity of the company. Have full regard to matters of health and safety, well-being, the environment and sustainability. Significant experience of the UK geotechnical industry. An understanding of the geotechnical design process. Working knowledge and demonstrable experience of estimating geotechnical engineering solutions. Essential understanding of the capabilities of the company. Excellent interpersonal and communication skills to engage with colleagues and clients. Proven ability to work well in a team as well as an individual. Effective time management to ensure task deadlines are met. High level of accuracy, attention to detail, and driven to providing a quality product and service to clients. Excellent IT skills including Excel, Word, PowerPoint, Project, Salesforce. Knowledge of Primavera P6 and Candy is preferrable though not essential. Ability to develop professional knowledge, skills, and competence on a continuing basis and ability to aid the professional development of others. Full UK driving licence. WORKING LOCATION Normally based in their Surrey office with the expectation of being present three days per Monday to Friday working week. Travel as required to client offices, joint venture partner and/or project opportunity offices, project opportunity site locations, and our clients regional offices.
Jun 13, 2026
Full time
Our client is a leading Piling contractor with a major Projects Division that delivers high-value multi-discipline ground engineering schemes across the UK and Ireland. They offer a range of geotechnical solutions, as well as civil engineering, marine, and tunnelling works, and we have the flexibility to act a principal contractor, joint venture partner or specialist subcontractor. Reporting to the Projects Division Estimating Manager, they are seeking an estimator who has experience in the pricing and presentation to clients of geotechnical engineering solutions (e.g., diaphragm wall construction, piling works, grouting works, etc.), and someone who is interested in pricing works where they are working collaboratively with their clients, joint venture partners, and supply chain to overcome complex multi-discipline civil engineering challenges. KEY RESPONSIBILITIES The role will cover all aspects of the preconstruction work winning phase of a project opportunity with key responsibilities including: Assisting with the management of incoming enquiries including the assessment and prioritisation of business appropriate tender opportunities. Developing appropriate opportunity bid/win strategies to suit the requirements of their clients. Collaboratively working with their technical and operations team and supply chain to prepare conforming scheme and value engineering scheme cost studies for internal governance review. Liaise with the technical, operations, and commercial teams to ensure risks are recognised and mitigation strategies are agreed at the preconstruction stage. Writing and presenting tender offers to the clients. Engaging in client interactions and tender negotiations from receipt of enquiry through to contract award and project handover to the operations team. Maintain and update the Salesforce CRM database. Engaging with and assisting the Projects Division Business Development Manager in identifying appropriate future clients and major project opportunities that would benefit from the value the division has to offer. KNOWLEDGE AND EXPERIENCE REQUIRED A relevant civil engineering degree or bias towards geotechnical engineering and professional qualification status is preferrable. Ability to discharge professional duties with integrity and ability to behave with integrity in relation to all conduct bearing upon the standing, reputation and dignity of the company. Have full regard to matters of health and safety, well-being, the environment and sustainability. Significant experience of the UK geotechnical industry. An understanding of the geotechnical design process. Working knowledge and demonstrable experience of estimating geotechnical engineering solutions. Essential understanding of the capabilities of the company. Excellent interpersonal and communication skills to engage with colleagues and clients. Proven ability to work well in a team as well as an individual. Effective time management to ensure task deadlines are met. High level of accuracy, attention to detail, and driven to providing a quality product and service to clients. Excellent IT skills including Excel, Word, PowerPoint, Project, Salesforce. Knowledge of Primavera P6 and Candy is preferrable though not essential. Ability to develop professional knowledge, skills, and competence on a continuing basis and ability to aid the professional development of others. Full UK driving licence. WORKING LOCATION Normally based in their Surrey office with the expectation of being present three days per Monday to Friday working week. Travel as required to client offices, joint venture partner and/or project opportunity offices, project opportunity site locations, and our clients regional offices.
