The client are an established designer and manufacturer of bespoke test systems and applications for the automotive industry. They are seeking to recruit an Installations and Commissioning Engineer for their busy operations in Worcester. Salary on the role is up to 48k per annum. The role is Monday to Thursday 8.30am to 5pm and then Friday 8.30am to 1pm. Key responsibility of the role The Installation and Commissioning Engineer is responsible for the on-site installation, testing, commissioning and handover of systems and equipment to ensure they meet design specifications, safety standards, and customer requirements. The role involves close collaboration with project managers, design teams, and clients to deliver projects on time and to a high standard of quality. Responsibilities and duties Install, configure, and commission equipment and systems according to engineering drawings, specifications, and project plans Perform pre-commissioning checks, functional testing, and performance verification Diagnose, troubleshoot, and resolve technical issues during installation and commissioning Ensure all work complies with health, safety, environmental, and quality standards Liaise with customers, contractors, and internal teams during site activities Produce commissioning reports, test documentation, and as-built records Provide technical support and training to customers and operators as required Participate in factory acceptance tests (FAT) and site acceptance tests (SAT) Support system upgrades, modifications, and corrective maintenance when needed Travel to customer sites as required, including occasional international travel Experience and knowledge required Proven experience in installation, commissioning, or field engineering roles Strong understanding of electrical/mechanical systems, controls, and instrumentation Knowledge of engine test and component test related equipment Understanding of PLC software and troubleshooting using diagnostics tools (Siemens S7 preferable) Integrating control technology into mechanical assemblies Calibration of instruments Fluid systems of solid and flexible pipes and fittings including- fuel systems, petrol and diesel, water systems for engine systems, oil systems, pressure testing and lead detection, filtration, flow, temperature and pressure testing Pneumatics systems knowledge (hard piping, flexible hoses and plastic tubing) Able to read technical engineering drawings Able to travel nationally and internationally to client sites Clean driving license Good time management and organisational abilities Expenses to be paid by the company, a phone, a laptop and a car provided. Free parking available on site at headquarters in Worcester, training and progression opportunities to be provided The role is based in Worcester so would be commutable from Droitwich, Redditch, Bromsgrove, Kidderminster, Alcester, Birmingham, Solihull, Tewkesbury, Evesham
Jun 14, 2026
Full time
The client are an established designer and manufacturer of bespoke test systems and applications for the automotive industry. They are seeking to recruit an Installations and Commissioning Engineer for their busy operations in Worcester. Salary on the role is up to 48k per annum. The role is Monday to Thursday 8.30am to 5pm and then Friday 8.30am to 1pm. Key responsibility of the role The Installation and Commissioning Engineer is responsible for the on-site installation, testing, commissioning and handover of systems and equipment to ensure they meet design specifications, safety standards, and customer requirements. The role involves close collaboration with project managers, design teams, and clients to deliver projects on time and to a high standard of quality. Responsibilities and duties Install, configure, and commission equipment and systems according to engineering drawings, specifications, and project plans Perform pre-commissioning checks, functional testing, and performance verification Diagnose, troubleshoot, and resolve technical issues during installation and commissioning Ensure all work complies with health, safety, environmental, and quality standards Liaise with customers, contractors, and internal teams during site activities Produce commissioning reports, test documentation, and as-built records Provide technical support and training to customers and operators as required Participate in factory acceptance tests (FAT) and site acceptance tests (SAT) Support system upgrades, modifications, and corrective maintenance when needed Travel to customer sites as required, including occasional international travel Experience and knowledge required Proven experience in installation, commissioning, or field engineering roles Strong understanding of electrical/mechanical systems, controls, and instrumentation Knowledge of engine test and component test related equipment Understanding of PLC software and troubleshooting using diagnostics tools (Siemens S7 preferable) Integrating control technology into mechanical assemblies Calibration of instruments Fluid systems of solid and flexible pipes and fittings including- fuel systems, petrol and diesel, water systems for engine systems, oil systems, pressure testing and lead detection, filtration, flow, temperature and pressure testing Pneumatics systems knowledge (hard piping, flexible hoses and plastic tubing) Able to read technical engineering drawings Able to travel nationally and internationally to client sites Clean driving license Good time management and organisational abilities Expenses to be paid by the company, a phone, a laptop and a car provided. Free parking available on site at headquarters in Worcester, training and progression opportunities to be provided The role is based in Worcester so would be commutable from Droitwich, Redditch, Bromsgrove, Kidderminster, Alcester, Birmingham, Solihull, Tewkesbury, Evesham
Your new company Are you passionate about electrical systems and automation? Do you thrive in a hands-on role where your expertise keeps operations running smoothly and efficiently? We're looking for an experienced and electrically qualified engineer to support the site maintenance team. Your new role You will resolve complex electrical and electronic breakdowns with confidence and precision whilst enhancing and evolving electrical and control systems to meet future demands. Ultimately, you will be responsible for safeguarding the integrity of the control systems and automation assets and ensuring the site's systems are secure, reliable, and always up to date.Implement software and hardware upgrades, lead initiatives to reduce downtime, manage small to medium automation projects, including panel and HMI design and installation. Monitor and mitigate risks related to electronic component obsolescence. Maintain a comprehensive register of control systems, highlighting critical spares and obsolescence Perform regular backups of PLC and HMI programmes with secure version control, replace PLC and inverter batteries inline with preventative maintenance schedules. What you'll need to succeed Recognised electrical qualifications NVQ/C&G level 3 minimum requirement, proven experience in PLC programming, (Siemens, Allen-Bradley, Mitsubishi) Working knowledge of HMI systems, variable speed drives, instrumentation and control panels. Strong understanding of electrical schematics, safety systems and industrial communication networks Experience in fault-finding and analytical skills Ability to read and interpret electrical and control schematics accurately Proactive approach to problem-solving, attention to detail and reliability Experience within a manufacturing environment. What you'll get in return Starting salary in the range of 50k, working Monday to Friday 37.5 hours per week. Enhanced pension and sick pay schemes, 25+8 holidays, discount schemes and more What you need to do now If you're interested in this role, click 'apply now' to forward an up-to-date copy of your CV, or call us now. If this job isn't quite right for you, but you are looking for a new position, please contact us for a confidential discussion about your career. Hays EA is a trading division of Hays Specialist Recruitment Limited and acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job you accept the T&C's, Privacy Policy and Disclaimers which can be found at (url removed)
Jun 14, 2026
Full time
Your new company Are you passionate about electrical systems and automation? Do you thrive in a hands-on role where your expertise keeps operations running smoothly and efficiently? We're looking for an experienced and electrically qualified engineer to support the site maintenance team. Your new role You will resolve complex electrical and electronic breakdowns with confidence and precision whilst enhancing and evolving electrical and control systems to meet future demands. Ultimately, you will be responsible for safeguarding the integrity of the control systems and automation assets and ensuring the site's systems are secure, reliable, and always up to date.Implement software and hardware upgrades, lead initiatives to reduce downtime, manage small to medium automation projects, including panel and HMI design and installation. Monitor and mitigate risks related to electronic component obsolescence. Maintain a comprehensive register of control systems, highlighting critical spares and obsolescence Perform regular backups of PLC and HMI programmes with secure version control, replace PLC and inverter batteries inline with preventative maintenance schedules. What you'll need to succeed Recognised electrical qualifications NVQ/C&G level 3 minimum requirement, proven experience in PLC programming, (Siemens, Allen-Bradley, Mitsubishi) Working knowledge of HMI systems, variable speed drives, instrumentation and control panels. Strong understanding of electrical schematics, safety systems and industrial communication networks Experience in fault-finding and analytical skills Ability to read and interpret electrical and control schematics accurately Proactive approach to problem-solving, attention to detail and reliability Experience within a manufacturing environment. What you'll get in return Starting salary in the range of 50k, working Monday to Friday 37.5 hours per week. Enhanced pension and sick pay schemes, 25+8 holidays, discount schemes and more What you need to do now If you're interested in this role, click 'apply now' to forward an up-to-date copy of your CV, or call us now. If this job isn't quite right for you, but you are looking for a new position, please contact us for a confidential discussion about your career. Hays EA is a trading division of Hays Specialist Recruitment Limited and acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job you accept the T&C's, Privacy Policy and Disclaimers which can be found at (url removed)
Control Systems Engineer £40,000 - £50,000 + 30 Days Holiday, Health Scheme, Gym Membership, Early Finish Friday, Flexitime Plymouth Ref: 25414 Ready to work on advanced automation systems used across aerospace, renewable energy, automotive and marine industries? Join a specialist engineering business designing bespoke automated equipment for a leading international customer base. This is a fantastic opportunity for a Control Systems Engineer looking to work on varied, technically challenging projects with real involvement across the full project lifecycle. From PLC software development and control system design through to commissioning and client handover, you ll play a key role in delivering innovative automation solutions while developing your long-term career within automation and controls engineering. Control Systems Engineer - The Role: Design electrical and control systems for special purpose machinery Develop and modify PLC software, primarily using Siemens and Omron platforms Work closely with electrical, mechanical and software engineering teams Support projects from feasibility through to build, commissioning and customer handover Assist with technical sales support, quotations and customer problem-solving Research new technologies and solutions to improve equipment performance Control Systems Engineer - What We re Looking For: Experience with PLC programming, ideally Siemens TIA Portal or Omron Strong understanding of automation and machinery control systems Practical engineering problem-solving skills Strong communication and relationship-building ability Willingness to travel within the UK and internationally when required Why Join? Work on bespoke, technically advanced automation projects Exposure to multiple high-tech industries and international customers Structured development and long-term career progression Varied role with involvement across the full project lifecycle Excellent benefits package including 30 days holiday, health scheme and gym membership Interested? If you re looking for a role where you can develop technically, work on genuinely interesting automation projects and be part of a supportive engineering team, we d love to hear from you. For more information, please contact John Anderson. AE1
Jun 14, 2026
Full time
Control Systems Engineer £40,000 - £50,000 + 30 Days Holiday, Health Scheme, Gym Membership, Early Finish Friday, Flexitime Plymouth Ref: 25414 Ready to work on advanced automation systems used across aerospace, renewable energy, automotive and marine industries? Join a specialist engineering business designing bespoke automated equipment for a leading international customer base. This is a fantastic opportunity for a Control Systems Engineer looking to work on varied, technically challenging projects with real involvement across the full project lifecycle. From PLC software development and control system design through to commissioning and client handover, you ll play a key role in delivering innovative automation solutions while developing your long-term career within automation and controls engineering. Control Systems Engineer - The Role: Design electrical and control systems for special purpose machinery Develop and modify PLC software, primarily using Siemens and Omron platforms Work closely with electrical, mechanical and software engineering teams Support projects from feasibility through to build, commissioning and customer handover Assist with technical sales support, quotations and customer problem-solving Research new technologies and solutions to improve equipment performance Control Systems Engineer - What We re Looking For: Experience with PLC programming, ideally Siemens TIA Portal or Omron Strong understanding of automation and machinery control systems Practical engineering problem-solving skills Strong communication and relationship-building ability Willingness to travel within the UK and internationally when required Why Join? Work on bespoke, technically advanced automation projects Exposure to multiple high-tech industries and international customers Structured development and long-term career progression Varied role with involvement across the full project lifecycle Excellent benefits package including 30 days holiday, health scheme and gym membership Interested? If you re looking for a role where you can develop technically, work on genuinely interesting automation projects and be part of a supportive engineering team, we d love to hear from you. For more information, please contact John Anderson. AE1
Senior Control Systems Engineer Location - Glasgow Are you experienced in PLC and SCADA systems across the full project lifecycle? Do you enjoy working on complex projects within energy and renewables? Looking for a role where you can develop both technically and professionally? What's in it for you: Strong basic salary 28 days holiday + bank holidays Hybrid working (2 days from home) with flexible hours Ongoing training and development 6.5% pension Life assurance (4x salary) Private healthcare What will you be doing? Designing, developing and implementing PLC and SCADA/DCS systems Working across the full project lifecycle, from concept through to delivery Producing design and test documentation (FDS, DDS, test specifications) Carrying out factory acceptance testing (FAT) with internal teams and clients Modifying and upgrading existing systems, as well as supporting new builds Reviewing and checking technical work produced by others Supporting and mentoring less experienced engineers Where you'll be doing it: You'll be joining a well-established engineering business working on control and automation projects across energy, renewables, water and manufacturing sectors. Projects are often within highly regulated environments, focused on improving performance and efficiency at scale. What you'll need: Experience with PLC platforms such as Siemens, Rockwell or Schneider Strong SCADA configuration experience (e.g. WinCC, PCS7, Zenon or similar) Ability to write software to IEC61131 standards (ladder, FBD, ST, SFC) Experience producing technical specifications and project documentation Understanding of full project lifecycle and QA processes Strong problem-solving skills and a structured approach Willingness to travel when required Full UK driving licence We appreciate your CV may not be up to date. No problem, just apply and we can deal with that later. Important Information: We endeavour to process your personal data in a fair and transparent manner. In applying for this role, Russell Taylor will be acting within your interest and will contact you in relation to the role, either by email, phone or text message. For more information see our Privacy Policy on our website. It is important you are aware of your individual rights and the provisions the company has put in place to protect your data. If you would like further information on the policy or GDPR please get in touch with us here.
Jun 13, 2026
Full time
Senior Control Systems Engineer Location - Glasgow Are you experienced in PLC and SCADA systems across the full project lifecycle? Do you enjoy working on complex projects within energy and renewables? Looking for a role where you can develop both technically and professionally? What's in it for you: Strong basic salary 28 days holiday + bank holidays Hybrid working (2 days from home) with flexible hours Ongoing training and development 6.5% pension Life assurance (4x salary) Private healthcare What will you be doing? Designing, developing and implementing PLC and SCADA/DCS systems Working across the full project lifecycle, from concept through to delivery Producing design and test documentation (FDS, DDS, test specifications) Carrying out factory acceptance testing (FAT) with internal teams and clients Modifying and upgrading existing systems, as well as supporting new builds Reviewing and checking technical work produced by others Supporting and mentoring less experienced engineers Where you'll be doing it: You'll be joining a well-established engineering business working on control and automation projects across energy, renewables, water and manufacturing sectors. Projects are often within highly regulated environments, focused on improving performance and efficiency at scale. What you'll need: Experience with PLC platforms such as Siemens, Rockwell or Schneider Strong SCADA configuration experience (e.g. WinCC, PCS7, Zenon or similar) Ability to write software to IEC61131 standards (ladder, FBD, ST, SFC) Experience producing technical specifications and project documentation Understanding of full project lifecycle and QA processes Strong problem-solving skills and a structured approach Willingness to travel when required Full UK driving licence We appreciate your CV may not be up to date. No problem, just apply and we can deal with that later. Important Information: We endeavour to process your personal data in a fair and transparent manner. In applying for this role, Russell Taylor will be acting within your interest and will contact you in relation to the role, either by email, phone or text message. For more information see our Privacy Policy on our website. It is important you are aware of your individual rights and the provisions the company has put in place to protect your data. If you would like further information on the policy or GDPR please get in touch with us here.
Control Systems Engineer Location: West Midlands Salary: Competitive Salary DOE Full-Time or Part-Time Permanent Control Systems Engineer Siemens TIA Portal PLC Programming Automatio n My client is a growing industrial automation and control systems business looking to appoint a Control Systems Enginee r as part of a major growth phase within the company. This role offers the opportunity to work on a wide variety of industrial automation projects involving Siemens PLCs, HMIs, drives and control systems across manufacturing and industrial environments. The business is open to speaking with: Early career Controls Engineers Junior Automation Engineers Mid-level Controls Engineers Experienced Senior Control Systems Engineers Full-time and part-time applications are both welcomed. The Role As a Control Systems Engineer, you will be involved in: PLC programming and software development Siemens HMI design and configuration Siemens drive/VFD configuration Control system testing and fault finding Automation project delivery Commissioning and customer support activities Supporting industrial automation and control system projects from concept through to completion This role will involve a mixture of office-based engineering work alongside occasional customer site visits. Key Skills & Experience Essential: Previous experience within a Control Systems Engineer, Controls Engineer, PLC Engineer or Automation Engineer role Siemens PLC programming experience Experience using Siemens TIA Portal Experience with: Ladder Logic Structured Text Function Block Design (FBD) Experience with industrial automation systems Fault finding and troubleshooting experience Highly Desirable: Siemens ET200SP experience Siemens S7-1200 / S7-1500 experience Siemens Unified Comfort HMI experience Siemens G120C drive experience Commissioning experience Industrial instrumentation exposure SCADA experience JAVA exposure Technologies Used Siemens ET200SP Safety PLCs Siemens S7-1200 / S7-1500 Siemens Unified Comfort HMIs Siemens G120C drives Siemens TIA Portal V19+ Exposure to additional automation products would also be beneficial, including: Allen Bradley Schneider Electric Eurotherm Wago Weidm ller What's On Offer? Opportunity to join a growing automation business Varied automation and controls projects Flexible working options Long-term progression opportunities Opportunity to grow alongside the business Smaller engineering team with real technical influence Stable pipeline of upcoming projects and investment This is an excellent opportunity for someone looking to develop their career within industrial automation whilst working in a technically focused and growing engineering environment.
Jun 13, 2026
Full time
Control Systems Engineer Location: West Midlands Salary: Competitive Salary DOE Full-Time or Part-Time Permanent Control Systems Engineer Siemens TIA Portal PLC Programming Automatio n My client is a growing industrial automation and control systems business looking to appoint a Control Systems Enginee r as part of a major growth phase within the company. This role offers the opportunity to work on a wide variety of industrial automation projects involving Siemens PLCs, HMIs, drives and control systems across manufacturing and industrial environments. The business is open to speaking with: Early career Controls Engineers Junior Automation Engineers Mid-level Controls Engineers Experienced Senior Control Systems Engineers Full-time and part-time applications are both welcomed. The Role As a Control Systems Engineer, you will be involved in: PLC programming and software development Siemens HMI design and configuration Siemens drive/VFD configuration Control system testing and fault finding Automation project delivery Commissioning and customer support activities Supporting industrial automation and control system projects from concept through to completion This role will involve a mixture of office-based engineering work alongside occasional customer site visits. Key Skills & Experience Essential: Previous experience within a Control Systems Engineer, Controls Engineer, PLC Engineer or Automation Engineer role Siemens PLC programming experience Experience using Siemens TIA Portal Experience with: Ladder Logic Structured Text Function Block Design (FBD) Experience with industrial automation systems Fault finding and troubleshooting experience Highly Desirable: Siemens ET200SP experience Siemens S7-1200 / S7-1500 experience Siemens Unified Comfort HMI experience Siemens G120C drive experience Commissioning experience Industrial instrumentation exposure SCADA experience JAVA exposure Technologies Used Siemens ET200SP Safety PLCs Siemens S7-1200 / S7-1500 Siemens Unified Comfort HMIs Siemens G120C drives Siemens TIA Portal V19+ Exposure to additional automation products would also be beneficial, including: Allen Bradley Schneider Electric Eurotherm Wago Weidm ller What's On Offer? Opportunity to join a growing automation business Varied automation and controls projects Flexible working options Long-term progression opportunities Opportunity to grow alongside the business Smaller engineering team with real technical influence Stable pipeline of upcoming projects and investment This is an excellent opportunity for someone looking to develop their career within industrial automation whilst working in a technically focused and growing engineering environment.
Are you an experienced Automation Engineer with a solid background in control systems, across a range of special purpose machinery? Can you write PLC software from scratch if needed? Do you want a role with less travel - where you'll support the whole engineering team remotely across installation, commissioning, service and repair in the United Kingdom? Home based, you will likely only be on customer sites 2-3 days a month. BASIC SALARY: Up to £85,000 dependant on your relevant experience BENEFITS: Home based - remote / hybrid working 25 Days Holiday + Bank Holidays Company Vehicle 5% Pension LOCATION: Birmingham COMMUTABLE LOCATIONS: Stoke on Trent, Manchester, Sheffield, Leicester, Nottingham, Derby, Coventry, Sheffield, Liverpool, Leeds, Huddersfield, Peterborough, Milton Keynes, Teesside, Wirral, Bradford, Newcastle, Bolton, Hull, Preston, Wigan, Barnsley, Luton, Northampton, Worthing, London. REASONS WHY YOU SHOULD APPLY: You can live anywhere in the UK if you are the right person This is a brand new role, created to ease our reliance on global machine support and bring it in house, in the UK If you're currently an Automation Engineer or Controls Engineer, then this should be a lot less travel than you're currently used to - so a better work life balance for you JOB DESCRIPTION: Automation Engineer, Controls Engineer - Programmable Logic Controller, FMCG We're a global manufacturer of filling and packaging machines and provide a comprehensive service to include installation, commissioning, service and breakdown to our customers. We need an experienced Engineer that can remotely support that engineering team across customer sites in the United Kingdom. You will need a broad appreciation of control systems and automaton and be able to write PLC software from scratch. Although most of the work will be editing and modifying. RESPONSIBILITIES: Automation Engineer, Controls Engineer - Programmable Logic Controller, FMCG Liaise with customers regarding retrieving backups of PLC programs, HMI programs and robot programs for modifications. Modifying software for conversions and writing software for extensive modifications, to provide new functionality to already existing equipment Support our service engineers with any technical issues and manage their work during upgrades and modifications Resolve issues with third party suppliers and / or customers interfacing Troubleshoot network issues. This could be ethernet, Profinet, Profibus, DeviceNet, ControlNet etc Assist with the connection of machines to MES / PDA systems, modify our equipment to provide necessary data to those systems. YOUR BACKGROUND: Automation Engineer, Controls Engineer - Programmable Logic Controller, FMCG You'll have a proven track record as a Controls Engineer or Automation Engineer or equivalent working for a PPMA business or similar supplying the beverage and / or food manufacturing, FMCG, Pharmaceutical, Chemical or water treatment markets. Likely in Siemens S7 or Allen Bradley. Any KUKA / Robot technology knowledge is a bonus. You MUST be able to write software from scratch, but 50% of this role will be modifying and upgrading software. Your experience will need to cover machine connectivity and industrial networking issues. Any specific experience of filling and packaging machinery, or working for a systems builder or integrator would be advantageous, but is not essential. You MUST be a qualified Engineer (likely degree educated) and possess significant practical experience and / or qualifications in the field of automation and controls. You MUST be willing to travel through the UK to customer sites where needed supporting the installation, commissioning and service Engineers - likely 2-4 nights per month. THE COMPANY: We are a global German manufacturer of special purpose machinery for the Food, Pharmaceutical and Beverage industries. It is highly likely you will have worked in any of the following roles and/or markets, and worked with the following products and/or services: Automation Engineer, Controls Engineer, PLC Programmer - PLC Programs - Siemens, Allen Bradley, Mitsubishi, S7, Automate UK, packaging machinery, FMCG, food, chemical, beverage, pharmaceutical, commissioning, installation, KUKA, Robotics,HMI, ethernet, MES, manufacturing execution system, Profinet, Profibus, DeviceNet, ControlNet, OPC server, Weihenstephan, industrial networking, Electrical. INTERESTED? Please click apply. You will receive an acknowledgement of your application. Wallace Hind Selection, alongside our client embrace diversity, champion equality, and foster inclusion to create a work environment where everyone belongs and thrives. Please Note: Wallace Hind Selection have been chosen as the retained recruitment partner of our client and therefore any direct applications to our client from candidates or agencies will be forwarded on to us direct. REF: JAC18485, Wallace Hind Selection
Jun 13, 2026
Full time
Are you an experienced Automation Engineer with a solid background in control systems, across a range of special purpose machinery? Can you write PLC software from scratch if needed? Do you want a role with less travel - where you'll support the whole engineering team remotely across installation, commissioning, service and repair in the United Kingdom? Home based, you will likely only be on customer sites 2-3 days a month. BASIC SALARY: Up to £85,000 dependant on your relevant experience BENEFITS: Home based - remote / hybrid working 25 Days Holiday + Bank Holidays Company Vehicle 5% Pension LOCATION: Birmingham COMMUTABLE LOCATIONS: Stoke on Trent, Manchester, Sheffield, Leicester, Nottingham, Derby, Coventry, Sheffield, Liverpool, Leeds, Huddersfield, Peterborough, Milton Keynes, Teesside, Wirral, Bradford, Newcastle, Bolton, Hull, Preston, Wigan, Barnsley, Luton, Northampton, Worthing, London. REASONS WHY YOU SHOULD APPLY: You can live anywhere in the UK if you are the right person This is a brand new role, created to ease our reliance on global machine support and bring it in house, in the UK If you're currently an Automation Engineer or Controls Engineer, then this should be a lot less travel than you're currently used to - so a better work life balance for you JOB DESCRIPTION: Automation Engineer, Controls Engineer - Programmable Logic Controller, FMCG We're a global manufacturer of filling and packaging machines and provide a comprehensive service to include installation, commissioning, service and breakdown to our customers. We need an experienced Engineer that can remotely support that engineering team across customer sites in the United Kingdom. You will need a broad appreciation of control systems and automaton and be able to write PLC software from scratch. Although most of the work will be editing and modifying. RESPONSIBILITIES: Automation Engineer, Controls Engineer - Programmable Logic Controller, FMCG Liaise with customers regarding retrieving backups of PLC programs, HMI programs and robot programs for modifications. Modifying software for conversions and writing software for extensive modifications, to provide new functionality to already existing equipment Support our service engineers with any technical issues and manage their work during upgrades and modifications Resolve issues with third party suppliers and / or customers interfacing Troubleshoot network issues. This could be ethernet, Profinet, Profibus, DeviceNet, ControlNet etc Assist with the connection of machines to MES / PDA systems, modify our equipment to provide necessary data to those systems. YOUR BACKGROUND: Automation Engineer, Controls Engineer - Programmable Logic Controller, FMCG You'll have a proven track record as a Controls Engineer or Automation Engineer or equivalent working for a PPMA business or similar supplying the beverage and / or food manufacturing, FMCG, Pharmaceutical, Chemical or water treatment markets. Likely in Siemens S7 or Allen Bradley. Any KUKA / Robot technology knowledge is a bonus. You MUST be able to write software from scratch, but 50% of this role will be modifying and upgrading software. Your experience will need to cover machine connectivity and industrial networking issues. Any specific experience of filling and packaging machinery, or working for a systems builder or integrator would be advantageous, but is not essential. You MUST be a qualified Engineer (likely degree educated) and possess significant practical experience and / or qualifications in the field of automation and controls. You MUST be willing to travel through the UK to customer sites where needed supporting the installation, commissioning and service Engineers - likely 2-4 nights per month. THE COMPANY: We are a global German manufacturer of special purpose machinery for the Food, Pharmaceutical and Beverage industries. It is highly likely you will have worked in any of the following roles and/or markets, and worked with the following products and/or services: Automation Engineer, Controls Engineer, PLC Programmer - PLC Programs - Siemens, Allen Bradley, Mitsubishi, S7, Automate UK, packaging machinery, FMCG, food, chemical, beverage, pharmaceutical, commissioning, installation, KUKA, Robotics,HMI, ethernet, MES, manufacturing execution system, Profinet, Profibus, DeviceNet, ControlNet, OPC server, Weihenstephan, industrial networking, Electrical. INTERESTED? Please click apply. You will receive an acknowledgement of your application. Wallace Hind Selection, alongside our client embrace diversity, champion equality, and foster inclusion to create a work environment where everyone belongs and thrives. Please Note: Wallace Hind Selection have been chosen as the retained recruitment partner of our client and therefore any direct applications to our client from candidates or agencies will be forwarded on to us direct. REF: JAC18485, Wallace Hind Selection
Are you an experienced Automation Engineer with a solid background in control systems, across a range of special purpose machinery? Can you write PLC software from scratch if needed? Do you want a role with less travel - where you'll support the whole engineering team remotely across installation, commissioning, service and repair in the United Kingdom? Home based, you will likely only be on customer sites 2-3 days a month. BASIC SALARY: Up to £85,000 dependant on your relevant experience BENEFITS: Home based - remote / hybrid working 25 Days Holiday + Bank Holidays Company Vehicle 5% Pension LOCATION: Birmingham COMMUTABLE LOCATIONS: Stoke on Trent, Manchester, Sheffield, Leicester, Nottingham, Derby, Coventry, Sheffield, Liverpool, Leeds, Huddersfield, Peterborough, Milton Keynes, Teesside, Wirral, Bradford, Newcastle, Bolton, Hull, Preston, Wigan, Barnsley, Luton, Northampton, Worthing, London. REASONS WHY YOU SHOULD APPLY: You can live anywhere in the UK if you are the right person This is a brand new role, created to ease our reliance on global machine support and bring it in house, in the UK If you're currently an Automation Engineer or Controls Engineer, then this should be a lot less travel than you're currently used to - so a better work life balance for you JOB DESCRIPTION: Automation Engineer, Controls Engineer - Programmable Logic Controller, FMCG We're a global manufacturer of filling and packaging machines and provide a comprehensive service to include installation, commissioning, service and breakdown to our customers. We need an experienced Engineer that can remotely support that engineering team across customer sites in the United Kingdom. You will need a broad appreciation of control systems and automaton and be able to write PLC software from scratch. Although most of the work will be editing and modifying. RESPONSIBILITIES: Automation Engineer, Controls Engineer - Programmable Logic Controller, FMCG Liaise with customers regarding retrieving backups of PLC programs, HMI programs and robot programs for modifications. Modifying software for conversions and writing software for extensive modifications, to provide new functionality to already existing equipment Support our service engineers with any technical issues and manage their work during upgrades and modifications Resolve issues with third party suppliers and / or customers interfacing Troubleshoot network issues. This could be ethernet, Profinet, Profibus, DeviceNet, ControlNet etc Assist with the connection of machines to MES / PDA systems, modify our equipment to provide necessary data to those systems. YOUR BACKGROUND: Automation Engineer, Controls Engineer - Programmable Logic Controller, FMCG You'll have a proven track record as a Controls Engineer or Automation Engineer or equivalent working for a PPMA business or similar supplying the beverage and / or food manufacturing, FMCG, Pharmaceutical, Chemical or water treatment markets. Likely in Siemens S7 or Allen Bradley. Any KUKA / Robot technology knowledge is a bonus. You MUST be able to write software from scratch, but 50% of this role will be modifying and upgrading software. Your experience will need to cover machine connectivity and industrial networking issues. Any specific experience of filling and packaging machinery, or working for a systems builder or integrator would be advantageous, but is not essential. You MUST be a qualified Engineer (likely degree educated) and possess significant practical experience and / or qualifications in the field of automation and controls. You MUST be willing to travel through the UK to customer sites where needed supporting the installation, commissioning and service Engineers - likely 2-4 nights per month. THE COMPANY: We are a global German manufacturer of special purpose machinery for the Food, Pharmaceutical and Beverage industries. It is highly likely you will have worked in any of the following roles and/or markets, and worked with the following products and/or services: Automation Engineer, Controls Engineer, PLC Programmer - PLC Programs - Siemens, Allen Bradley, Mitsubishi, S7, Automate UK, packaging machinery, FMCG, food, chemical, beverage, pharmaceutical, commissioning, installation, KUKA, Robotics,HMI, ethernet, MES, manufacturing execution system, Profinet, Profibus, DeviceNet, ControlNet, OPC server, Weihenstephan, industrial networking, Electrical. INTERESTED? Please click apply. You will receive an acknowledgement of your application. Wallace Hind Selection, alongside our client embrace diversity, champion equality, and foster inclusion to create a work environment where everyone belongs and thrives. Please Note: Wallace Hind Selection have been chosen as the retained recruitment partner of our client and therefore any direct applications to our client from candidates or agencies will be forwarded on to us direct. REF: JAC18485, Wallace Hind Selection
Jun 13, 2026
Full time
Are you an experienced Automation Engineer with a solid background in control systems, across a range of special purpose machinery? Can you write PLC software from scratch if needed? Do you want a role with less travel - where you'll support the whole engineering team remotely across installation, commissioning, service and repair in the United Kingdom? Home based, you will likely only be on customer sites 2-3 days a month. BASIC SALARY: Up to £85,000 dependant on your relevant experience BENEFITS: Home based - remote / hybrid working 25 Days Holiday + Bank Holidays Company Vehicle 5% Pension LOCATION: Birmingham COMMUTABLE LOCATIONS: Stoke on Trent, Manchester, Sheffield, Leicester, Nottingham, Derby, Coventry, Sheffield, Liverpool, Leeds, Huddersfield, Peterborough, Milton Keynes, Teesside, Wirral, Bradford, Newcastle, Bolton, Hull, Preston, Wigan, Barnsley, Luton, Northampton, Worthing, London. REASONS WHY YOU SHOULD APPLY: You can live anywhere in the UK if you are the right person This is a brand new role, created to ease our reliance on global machine support and bring it in house, in the UK If you're currently an Automation Engineer or Controls Engineer, then this should be a lot less travel than you're currently used to - so a better work life balance for you JOB DESCRIPTION: Automation Engineer, Controls Engineer - Programmable Logic Controller, FMCG We're a global manufacturer of filling and packaging machines and provide a comprehensive service to include installation, commissioning, service and breakdown to our customers. We need an experienced Engineer that can remotely support that engineering team across customer sites in the United Kingdom. You will need a broad appreciation of control systems and automaton and be able to write PLC software from scratch. Although most of the work will be editing and modifying. RESPONSIBILITIES: Automation Engineer, Controls Engineer - Programmable Logic Controller, FMCG Liaise with customers regarding retrieving backups of PLC programs, HMI programs and robot programs for modifications. Modifying software for conversions and writing software for extensive modifications, to provide new functionality to already existing equipment Support our service engineers with any technical issues and manage their work during upgrades and modifications Resolve issues with third party suppliers and / or customers interfacing Troubleshoot network issues. This could be ethernet, Profinet, Profibus, DeviceNet, ControlNet etc Assist with the connection of machines to MES / PDA systems, modify our equipment to provide necessary data to those systems. YOUR BACKGROUND: Automation Engineer, Controls Engineer - Programmable Logic Controller, FMCG You'll have a proven track record as a Controls Engineer or Automation Engineer or equivalent working for a PPMA business or similar supplying the beverage and / or food manufacturing, FMCG, Pharmaceutical, Chemical or water treatment markets. Likely in Siemens S7 or Allen Bradley. Any KUKA / Robot technology knowledge is a bonus. You MUST be able to write software from scratch, but 50% of this role will be modifying and upgrading software. Your experience will need to cover machine connectivity and industrial networking issues. Any specific experience of filling and packaging machinery, or working for a systems builder or integrator would be advantageous, but is not essential. You MUST be a qualified Engineer (likely degree educated) and possess significant practical experience and / or qualifications in the field of automation and controls. You MUST be willing to travel through the UK to customer sites where needed supporting the installation, commissioning and service Engineers - likely 2-4 nights per month. THE COMPANY: We are a global German manufacturer of special purpose machinery for the Food, Pharmaceutical and Beverage industries. It is highly likely you will have worked in any of the following roles and/or markets, and worked with the following products and/or services: Automation Engineer, Controls Engineer, PLC Programmer - PLC Programs - Siemens, Allen Bradley, Mitsubishi, S7, Automate UK, packaging machinery, FMCG, food, chemical, beverage, pharmaceutical, commissioning, installation, KUKA, Robotics,HMI, ethernet, MES, manufacturing execution system, Profinet, Profibus, DeviceNet, ControlNet, OPC server, Weihenstephan, industrial networking, Electrical. INTERESTED? Please click apply. You will receive an acknowledgement of your application. Wallace Hind Selection, alongside our client embrace diversity, champion equality, and foster inclusion to create a work environment where everyone belongs and thrives. Please Note: Wallace Hind Selection have been chosen as the retained recruitment partner of our client and therefore any direct applications to our client from candidates or agencies will be forwarded on to us direct. REF: JAC18485, Wallace Hind Selection
Are you an experienced Automation Engineer with a solid background in control systems, across a range of special purpose machinery? Can you write PLC software from scratch if needed? Do you want a role with less travel - where you'll support the whole engineering team remotely across installation, commissioning, service and repair in the United Kingdom? Home based, you will likely only be on customer sites 2-3 days a month. BASIC SALARY: Up to £85,000 dependant on your relevant experience BENEFITS: Home based - remote / hybrid working 25 Days Holiday + Bank Holidays Company Vehicle 5% Pension LOCATION: Birmingham COMMUTABLE LOCATIONS: Stoke on Trent, Manchester, Sheffield, Leicester, Nottingham, Derby, Coventry, Sheffield, Liverpool, Leeds, Huddersfield, Peterborough, Milton Keynes, Teesside, Wirral, Bradford, Newcastle, Bolton, Hull, Preston, Wigan, Barnsley, Luton, Northampton, Worthing, London. REASONS WHY YOU SHOULD APPLY: You can live anywhere in the UK if you are the right person This is a brand new role, created to ease our reliance on global machine support and bring it in house, in the UK If you're currently an Automation Engineer or Controls Engineer, then this should be a lot less travel than you're currently used to - so a better work life balance for you JOB DESCRIPTION: Automation Engineer, Controls Engineer - Programmable Logic Controller, FMCG We're a global manufacturer of filling and packaging machines and provide a comprehensive service to include installation, commissioning, service and breakdown to our customers. We need an experienced Engineer that can remotely support that engineering team across customer sites in the United Kingdom. You will need a broad appreciation of control systems and automaton and be able to write PLC software from scratch. Although most of the work will be editing and modifying. RESPONSIBILITIES: Automation Engineer, Controls Engineer - Programmable Logic Controller, FMCG Liaise with customers regarding retrieving backups of PLC programs, HMI programs and robot programs for modifications. Modifying software for conversions and writing software for extensive modifications, to provide new functionality to already existing equipment Support our service engineers with any technical issues and manage their work during upgrades and modifications Resolve issues with third party suppliers and / or customers interfacing Troubleshoot network issues. This could be ethernet, Profinet, Profibus, DeviceNet, ControlNet etc Assist with the connection of machines to MES / PDA systems, modify our equipment to provide necessary data to those systems. YOUR BACKGROUND: Automation Engineer, Controls Engineer - Programmable Logic Controller, FMCG You'll have a proven track record as a Controls Engineer or Automation Engineer or equivalent working for a PPMA business or similar supplying the beverage and / or food manufacturing, FMCG, Pharmaceutical, Chemical or water treatment markets. Likely in Siemens S7 or Allen Bradley. Any KUKA / Robot technology knowledge is a bonus. You MUST be able to write software from scratch, but 50% of this role will be modifying and upgrading software. Your experience will need to cover machine connectivity and industrial networking issues. Any specific experience of filling and packaging machinery, or working for a systems builder or integrator would be advantageous, but is not essential. You MUST be a qualified Engineer (likely degree educated) and possess significant practical experience and / or qualifications in the field of automation and controls. You MUST be willing to travel through the UK to customer sites where needed supporting the installation, commissioning and service Engineers - likely 2-4 nights per month. THE COMPANY: We are a global German manufacturer of special purpose machinery for the Food, Pharmaceutical and Beverage industries. It is highly likely you will have worked in any of the following roles and/or markets, and worked with the following products and/or services: Automation Engineer, Controls Engineer, PLC Programmer - PLC Programs - Siemens, Allen Bradley, Mitsubishi, S7, Automate UK, packaging machinery, FMCG, food, chemical, beverage, pharmaceutical, commissioning, installation, KUKA, Robotics,HMI, ethernet, MES, manufacturing execution system, Profinet, Profibus, DeviceNet, ControlNet, OPC server, Weihenstephan, industrial networking, Electrical. INTERESTED? Please click apply. You will receive an acknowledgement of your application. Wallace Hind Selection, alongside our client embrace diversity, champion equality, and foster inclusion to create a work environment where everyone belongs and thrives. Please Note: Wallace Hind Selection have been chosen as the retained recruitment partner of our client and therefore any direct applications to our client from candidates or agencies will be forwarded on to us direct. REF: JAC18485, Wallace Hind Selection
Jun 13, 2026
Full time
Are you an experienced Automation Engineer with a solid background in control systems, across a range of special purpose machinery? Can you write PLC software from scratch if needed? Do you want a role with less travel - where you'll support the whole engineering team remotely across installation, commissioning, service and repair in the United Kingdom? Home based, you will likely only be on customer sites 2-3 days a month. BASIC SALARY: Up to £85,000 dependant on your relevant experience BENEFITS: Home based - remote / hybrid working 25 Days Holiday + Bank Holidays Company Vehicle 5% Pension LOCATION: Birmingham COMMUTABLE LOCATIONS: Stoke on Trent, Manchester, Sheffield, Leicester, Nottingham, Derby, Coventry, Sheffield, Liverpool, Leeds, Huddersfield, Peterborough, Milton Keynes, Teesside, Wirral, Bradford, Newcastle, Bolton, Hull, Preston, Wigan, Barnsley, Luton, Northampton, Worthing, London. REASONS WHY YOU SHOULD APPLY: You can live anywhere in the UK if you are the right person This is a brand new role, created to ease our reliance on global machine support and bring it in house, in the UK If you're currently an Automation Engineer or Controls Engineer, then this should be a lot less travel than you're currently used to - so a better work life balance for you JOB DESCRIPTION: Automation Engineer, Controls Engineer - Programmable Logic Controller, FMCG We're a global manufacturer of filling and packaging machines and provide a comprehensive service to include installation, commissioning, service and breakdown to our customers. We need an experienced Engineer that can remotely support that engineering team across customer sites in the United Kingdom. You will need a broad appreciation of control systems and automaton and be able to write PLC software from scratch. Although most of the work will be editing and modifying. RESPONSIBILITIES: Automation Engineer, Controls Engineer - Programmable Logic Controller, FMCG Liaise with customers regarding retrieving backups of PLC programs, HMI programs and robot programs for modifications. Modifying software for conversions and writing software for extensive modifications, to provide new functionality to already existing equipment Support our service engineers with any technical issues and manage their work during upgrades and modifications Resolve issues with third party suppliers and / or customers interfacing Troubleshoot network issues. This could be ethernet, Profinet, Profibus, DeviceNet, ControlNet etc Assist with the connection of machines to MES / PDA systems, modify our equipment to provide necessary data to those systems. YOUR BACKGROUND: Automation Engineer, Controls Engineer - Programmable Logic Controller, FMCG You'll have a proven track record as a Controls Engineer or Automation Engineer or equivalent working for a PPMA business or similar supplying the beverage and / or food manufacturing, FMCG, Pharmaceutical, Chemical or water treatment markets. Likely in Siemens S7 or Allen Bradley. Any KUKA / Robot technology knowledge is a bonus. You MUST be able to write software from scratch, but 50% of this role will be modifying and upgrading software. Your experience will need to cover machine connectivity and industrial networking issues. Any specific experience of filling and packaging machinery, or working for a systems builder or integrator would be advantageous, but is not essential. You MUST be a qualified Engineer (likely degree educated) and possess significant practical experience and / or qualifications in the field of automation and controls. You MUST be willing to travel through the UK to customer sites where needed supporting the installation, commissioning and service Engineers - likely 2-4 nights per month. THE COMPANY: We are a global German manufacturer of special purpose machinery for the Food, Pharmaceutical and Beverage industries. It is highly likely you will have worked in any of the following roles and/or markets, and worked with the following products and/or services: Automation Engineer, Controls Engineer, PLC Programmer - PLC Programs - Siemens, Allen Bradley, Mitsubishi, S7, Automate UK, packaging machinery, FMCG, food, chemical, beverage, pharmaceutical, commissioning, installation, KUKA, Robotics,HMI, ethernet, MES, manufacturing execution system, Profinet, Profibus, DeviceNet, ControlNet, OPC server, Weihenstephan, industrial networking, Electrical. INTERESTED? Please click apply. You will receive an acknowledgement of your application. Wallace Hind Selection, alongside our client embrace diversity, champion equality, and foster inclusion to create a work environment where everyone belongs and thrives. Please Note: Wallace Hind Selection have been chosen as the retained recruitment partner of our client and therefore any direct applications to our client from candidates or agencies will be forwarded on to us direct. REF: JAC18485, Wallace Hind Selection
Control Systems Engineer Woodford Green up to 70k As a Control Systems Engineer, you will bring an innovative approach to problem solving, you will be working with highly skilled engineers to help you develop and succeed in your career. The ideal candidate will have previous knowledge of PLC's, SCADA, HMI, variable speed drives and instrumentation products, with experience in a maintenance / electrical background or similar. Essential experience Experience in designing control system's PLC and HMI/SCADA software and making amendments/upgrades to existing system software. Experience in producing project documentation Competence in the programming of PLCs like Siemens, Rockwell, or Mitsubishi PLC's AND / OR competence in programming SCADA systems like Siemens, Rockwell or Wonderware HMI/SCADA platforms. UK Sites commissioning (which may involve short periods away from home) Software Engineering Degree and/or Electrical qualifications Experience with Allen Bradley, Siemens Mitsubishi PLC's or experience of SCADA systems like Wonderware, Iconics, Schneider or other platforms Good verbal and written communication skills Clean UK Driving License Must be eligible to work in the UK For Lead positions we would look for the ability to motivate and manage a team of engineers to improve performance (Must have over 5+ years experience)
Jun 13, 2026
Full time
Control Systems Engineer Woodford Green up to 70k As a Control Systems Engineer, you will bring an innovative approach to problem solving, you will be working with highly skilled engineers to help you develop and succeed in your career. The ideal candidate will have previous knowledge of PLC's, SCADA, HMI, variable speed drives and instrumentation products, with experience in a maintenance / electrical background or similar. Essential experience Experience in designing control system's PLC and HMI/SCADA software and making amendments/upgrades to existing system software. Experience in producing project documentation Competence in the programming of PLCs like Siemens, Rockwell, or Mitsubishi PLC's AND / OR competence in programming SCADA systems like Siemens, Rockwell or Wonderware HMI/SCADA platforms. UK Sites commissioning (which may involve short periods away from home) Software Engineering Degree and/or Electrical qualifications Experience with Allen Bradley, Siemens Mitsubishi PLC's or experience of SCADA systems like Wonderware, Iconics, Schneider or other platforms Good verbal and written communication skills Clean UK Driving License Must be eligible to work in the UK For Lead positions we would look for the ability to motivate and manage a team of engineers to improve performance (Must have over 5+ years experience)
Senior Control Systems Engineer London Up to 70k A UK-based systems engineering company is looking for experienced Control Systems Engineers to support the delivery of mission-critical control and communication systems across transport and critical infrastructure environments. This is an opportunity to join a growing engineering team working on complex and highly regulated projects involving PLC and SCADA systems. The role would suit engineers who enjoy technically challenging work, problem-solving, and delivering reliable systems within operational environments. Key Responsibilities Control system design and documentation (specifications, drawings, registers) PLC and SCADA software development (Rockwell and Siemens) Hardware configuration and system integration Factory and site testing and commissioning (FAT, SAT, migrations) On-site implementation and technical support Supporting assurance and requirements traceability activities Experience At least 5 years' experience in control systems engineering Experience delivering PLC and/or SCADA projects Strong communication and problem-solving skills A degree in a STEM subject or equivalent industry experience Experience with IEC 62443 or industrial cybersecurity standards
Jun 13, 2026
Full time
Senior Control Systems Engineer London Up to 70k A UK-based systems engineering company is looking for experienced Control Systems Engineers to support the delivery of mission-critical control and communication systems across transport and critical infrastructure environments. This is an opportunity to join a growing engineering team working on complex and highly regulated projects involving PLC and SCADA systems. The role would suit engineers who enjoy technically challenging work, problem-solving, and delivering reliable systems within operational environments. Key Responsibilities Control system design and documentation (specifications, drawings, registers) PLC and SCADA software development (Rockwell and Siemens) Hardware configuration and system integration Factory and site testing and commissioning (FAT, SAT, migrations) On-site implementation and technical support Supporting assurance and requirements traceability activities Experience At least 5 years' experience in control systems engineering Experience delivering PLC and/or SCADA projects Strong communication and problem-solving skills A degree in a STEM subject or equivalent industry experience Experience with IEC 62443 or industrial cybersecurity standards
Job Opportunity: Electrical Engineer - PLC Engineer (Water Sector) Location: Central England/East Anglia Rate: up to £60an hour Contract Duration: 6 - 12 months Are you an experienced Electrical Engineer with a passion for automation and control systems? We're seeking a talented PLC Engineer to join our team on a key project in the water sector. If you're driven, technically skilled, and ready to make a significant impact, this opportunity could be for you. Key Responsibilities: Develop Functional Design Specifications from customer control philosophies. Program, Test, and Commission PLC & HMI code to ensure flawless operations. Collaborate with Schneider, Rockwell, Siemens, and Mitsubishi PLC & HMI systems (experience preferred but not essential). Work with SCADA systems (experience preferred but not essential). Deliver high-quality projects for UK Water Authorities, with the option to leverage a strong automation or process background if water-specific experience is limited. Manage tasks autonomously, demonstrating strong self-motivation and initiative. What We're Looking For: Proficiency in PLC programming and commissioning. Previous experience in process automation or water sector projects. A proactive, independent worker who thrives in a fast-paced project environment. Why Join Us? Contribute to critical infrastructure in the water sector, helping improve efficiency and sustainability. Competitive contract rates and the opportunity to work on exciting, high-impact projects. A role offering autonomy and the chance to showcase your expertise in leading automation technologies. Interested in being part of a team driving change in the water industry? Apply today and take your career to the next level! If you are interested you can apply on online or send your CV to (url removed) and I will call you to discuss By applying for this position you are agreeing for Carrington West to hold and process your personal data in accordance with our Data Protection Policy. Your data will be shared with third party clients specifically relevant to any roles you have applied for. If at any stage you wish to withdraw your consent please email us on (url removed)
Jun 13, 2026
Contractor
Job Opportunity: Electrical Engineer - PLC Engineer (Water Sector) Location: Central England/East Anglia Rate: up to £60an hour Contract Duration: 6 - 12 months Are you an experienced Electrical Engineer with a passion for automation and control systems? We're seeking a talented PLC Engineer to join our team on a key project in the water sector. If you're driven, technically skilled, and ready to make a significant impact, this opportunity could be for you. Key Responsibilities: Develop Functional Design Specifications from customer control philosophies. Program, Test, and Commission PLC & HMI code to ensure flawless operations. Collaborate with Schneider, Rockwell, Siemens, and Mitsubishi PLC & HMI systems (experience preferred but not essential). Work with SCADA systems (experience preferred but not essential). Deliver high-quality projects for UK Water Authorities, with the option to leverage a strong automation or process background if water-specific experience is limited. Manage tasks autonomously, demonstrating strong self-motivation and initiative. What We're Looking For: Proficiency in PLC programming and commissioning. Previous experience in process automation or water sector projects. A proactive, independent worker who thrives in a fast-paced project environment. Why Join Us? Contribute to critical infrastructure in the water sector, helping improve efficiency and sustainability. Competitive contract rates and the opportunity to work on exciting, high-impact projects. A role offering autonomy and the chance to showcase your expertise in leading automation technologies. Interested in being part of a team driving change in the water industry? Apply today and take your career to the next level! If you are interested you can apply on online or send your CV to (url removed) and I will call you to discuss By applying for this position you are agreeing for Carrington West to hold and process your personal data in accordance with our Data Protection Policy. Your data will be shared with third party clients specifically relevant to any roles you have applied for. If at any stage you wish to withdraw your consent please email us on (url removed)
MERITUS are recruiting for a Lead Control Systems Software Engineer to join our client based in Glasgow to support the delivery of complex industrial automation and energy infrastructure projects. LEAD CONTROL SYSTEMS SOFTWARE ENGINEER - NEG (ENQUIRE FOR DETAILS) - GLASGOW (HYBRID, 3 DAYS ON-SITE) - SECTOR: ENERGY / INDUSTRIAL AUTOMATION Lead the design and development of industrial control system software solutions, primarily using Siemens PLC platforms. Oversee full project lifecycle delivery including requirements capture, system design, software development, testing, and commissioning. Provide technical leadership and mentoring support to engineers across multiple project teams. Interface directly with clients and stakeholders to ensure successful project delivery and technical alignment. Support Factory Acceptance Testing (FAT), Site Acceptance Testing (SAT), and on-site commissioning activities. Contribute to both new-build and upgrade projects across power and energy infrastructure environments. Skillset / experience required: Essential: Strong experience designing and programming Siemens PLC systems including TIA Portal, S7, and PCS7. Proven background delivering PLC, SCADA, and DCS control systems within industrial or energy environments. Experience working across full project lifecycles within control systems engineering. Strong understanding of IEC 61131 programming languages including Ladder Logic, Function Block, and Structured Text. Excellent communication and stakeholder management skills with the ability to lead engineering teams. Experience supporting commissioning, testing, and client-facing project activities. Desirable: Previous experience within the Energy, Power Generation, Utilities, or other highly regulated sectors. Experience leading multidisciplinary engineering teams on complex automation projects. Knowledge of industrial networking and communication protocols. Understanding of functional safety and control system standards. Experience working within systems integration or engineering consultancy environments. Benefits: Neg (Enquire for details) 28 days holiday + bank holidays 6.5% matched pension Private medical insurance Flexible / hybrid working options This is an excellent opportunity to join a leading engineering and systems integration organisation delivering high-profile projects across the Energy sector. The role offers the chance to work on technically challenging programmes, provide technical leadership across major projects, and play a key role in delivering critical infrastructure solutions.
Jun 13, 2026
Full time
MERITUS are recruiting for a Lead Control Systems Software Engineer to join our client based in Glasgow to support the delivery of complex industrial automation and energy infrastructure projects. LEAD CONTROL SYSTEMS SOFTWARE ENGINEER - NEG (ENQUIRE FOR DETAILS) - GLASGOW (HYBRID, 3 DAYS ON-SITE) - SECTOR: ENERGY / INDUSTRIAL AUTOMATION Lead the design and development of industrial control system software solutions, primarily using Siemens PLC platforms. Oversee full project lifecycle delivery including requirements capture, system design, software development, testing, and commissioning. Provide technical leadership and mentoring support to engineers across multiple project teams. Interface directly with clients and stakeholders to ensure successful project delivery and technical alignment. Support Factory Acceptance Testing (FAT), Site Acceptance Testing (SAT), and on-site commissioning activities. Contribute to both new-build and upgrade projects across power and energy infrastructure environments. Skillset / experience required: Essential: Strong experience designing and programming Siemens PLC systems including TIA Portal, S7, and PCS7. Proven background delivering PLC, SCADA, and DCS control systems within industrial or energy environments. Experience working across full project lifecycles within control systems engineering. Strong understanding of IEC 61131 programming languages including Ladder Logic, Function Block, and Structured Text. Excellent communication and stakeholder management skills with the ability to lead engineering teams. Experience supporting commissioning, testing, and client-facing project activities. Desirable: Previous experience within the Energy, Power Generation, Utilities, or other highly regulated sectors. Experience leading multidisciplinary engineering teams on complex automation projects. Knowledge of industrial networking and communication protocols. Understanding of functional safety and control system standards. Experience working within systems integration or engineering consultancy environments. Benefits: Neg (Enquire for details) 28 days holiday + bank holidays 6.5% matched pension Private medical insurance Flexible / hybrid working options This is an excellent opportunity to join a leading engineering and systems integration organisation delivering high-profile projects across the Energy sector. The role offers the chance to work on technically challenging programmes, provide technical leadership across major projects, and play a key role in delivering critical infrastructure solutions.
WHAT IS IN IT FOR YOU? • Permanent role • Salary - £40k circa • Monday to Friday 9am-5:30pm • 23 days holiday plus standard bank holidays • Company Sickness after 12 months • Membership of the Company s pension scheme 5% contribution • Group life assurance THE BUSINESS We are seeking to recruit an Electrical Engineer for our client based in Northamptonshire. Our client has a long-distinguished history in the construction of landmark structures around the world, particularly iconic bridges and buildings. The organisations principal focus now is the design, manufacture and operation of specialist equipment and temporary works for the construction of bridges, buildings, offshore structures, refineries, power stations and industrial plants. They have particular expertise in the erection of long span suspension and cable stayed bridges and in the engineering for specialist modular construction including heavy lifting and skidding operations. THE ROLE • Design and develop: Electrical and control systems for heavy lifting equipment • Detailed electrical and control system specifications, including hardware and software selection • Electrical circuit diagrams and schematics • Install, commission, test, and operate equipment in both workshop and field settings • Ensure compliance: With relevant electrical design and safety standards, European directives, and legislation • Project Execution: Conduct feasibility studies for new equipment designs • Provide technical support to customers remotely and onsite • Documentation and Training: Maintain accurate records of all work performed • Develop and maintain technical literature accompanying equipment • Design and deliver training programs for customers on equipment use, service, and repair • Maintenance: Perform routine and corrective maintenance on equipment in the workshop THE PERSON • Bachelor's degree in Electrical Engineering or similar • Minimum 3 years of experience: Designing and building electrical systems • Strong understanding of electrical principles, codes, and standards • Excellent communication and problem-solving skills • Experience with 400V AC power circuits and 24V DC control circuits is essential • Technical Skills: Proficiency in electrical design software (e.g., AutoCAD Electrical, EPLAN) • Professional Qualities: Ability to work independently and as part of a team • Strong project management and organisational skills • Commitment to continuous learning and professional development • Travel Requirements: Valid passport and willingness to travel internationally at short notice • Driver s license Preferable: • Experience with Hydraulic systems • Ability to programme PLCs • Construction site experience • CSCS card TO APPLY Please send your updated CV to Harry Mann or apply direct by calling Westray Recruitment Group
Jun 13, 2026
Full time
WHAT IS IN IT FOR YOU? • Permanent role • Salary - £40k circa • Monday to Friday 9am-5:30pm • 23 days holiday plus standard bank holidays • Company Sickness after 12 months • Membership of the Company s pension scheme 5% contribution • Group life assurance THE BUSINESS We are seeking to recruit an Electrical Engineer for our client based in Northamptonshire. Our client has a long-distinguished history in the construction of landmark structures around the world, particularly iconic bridges and buildings. The organisations principal focus now is the design, manufacture and operation of specialist equipment and temporary works for the construction of bridges, buildings, offshore structures, refineries, power stations and industrial plants. They have particular expertise in the erection of long span suspension and cable stayed bridges and in the engineering for specialist modular construction including heavy lifting and skidding operations. THE ROLE • Design and develop: Electrical and control systems for heavy lifting equipment • Detailed electrical and control system specifications, including hardware and software selection • Electrical circuit diagrams and schematics • Install, commission, test, and operate equipment in both workshop and field settings • Ensure compliance: With relevant electrical design and safety standards, European directives, and legislation • Project Execution: Conduct feasibility studies for new equipment designs • Provide technical support to customers remotely and onsite • Documentation and Training: Maintain accurate records of all work performed • Develop and maintain technical literature accompanying equipment • Design and deliver training programs for customers on equipment use, service, and repair • Maintenance: Perform routine and corrective maintenance on equipment in the workshop THE PERSON • Bachelor's degree in Electrical Engineering or similar • Minimum 3 years of experience: Designing and building electrical systems • Strong understanding of electrical principles, codes, and standards • Excellent communication and problem-solving skills • Experience with 400V AC power circuits and 24V DC control circuits is essential • Technical Skills: Proficiency in electrical design software (e.g., AutoCAD Electrical, EPLAN) • Professional Qualities: Ability to work independently and as part of a team • Strong project management and organisational skills • Commitment to continuous learning and professional development • Travel Requirements: Valid passport and willingness to travel internationally at short notice • Driver s license Preferable: • Experience with Hydraulic systems • Ability to programme PLCs • Construction site experience • CSCS card TO APPLY Please send your updated CV to Harry Mann or apply direct by calling Westray Recruitment Group
SRT Marine Systems plc (SRT) are a market leader in its domain of international marine surveillance technology and systems. We are respected, established and an ambitious multi-national company headquartered in the UK with a global customer base. The company has a global impact in the marine domain by leading the next generation of Maritime Domain Awareness 'MDA' technologies, products and systems that significantly enhance, security, safety and environment protection and sustainability. Our customers are worldwide and range from the largest national coast guards to individual vessel owners. SRT is an exciting company where high quality results are rewarded. We are ambitious and are constantly seeking to innovate to deliver better products and services to our customers. We strive to make SRT a rewarding and challenging place to work where talented hard-working individuals have the opportunity to make a real impact across the marine world. Role Overview This role is ideal for a talented and ambitious professional IT Systems and Network Engineer. The role of IT Systems and Network Engineer entails being responsible for, the installation, configuration and commissioning of complex network servers, PC's and other systems such as CCTV and building monitoring systems that make up our maritime surveillance systems. Along with their ongoing maintenance and issue trouble shooting and resolution. Please note: The role of IT Systems and Network Engineer is a role where you will travel globally for our projects, whether this is the Middle East, Far East, South East Asia, Africa's region - you will be expected to travel and live in country with an agreed rotation period up to 12 weeks in-country, 2 weeks home. Responsibilities - IT Systems and Network Engineer Configuration and deployment of networked servers, storage, network (hardware and related software packages) and other IT system support infrastructure Check and validate installations, and provide reports Configuration and troubleshooting of different types of connectivity systems Monitor system performance, undertake trouble shooting and resolution and implementation of software patches and hardware replacements Support and train customer internal IT departments and technicians to enable them to take operational ownership and responsibility of the systems we have supplied - day to day maintenance, issue identification and resolution Maintain good document trails of system changes and updates Requirements - IT Systems and Network Engineer ESSENTIAL - A minimum of 5 years network IT system setup and management experience in either commercial or industrial environments ESSENTIAL - Professional English language - spoken and written ESSENTIAL - Deep understanding of IT networks and server system configurations and set up - in particular Windows/Linux servers and networking (TCP/IP, DNS, VPN) Experience with virtualisation (VMware/Hyper-V) and cloud platforms (AWS/Azure) advantageous Strong understanding of IT security and data protection best practices Strong analytical and problem-solving skills Excellent teamwork and communication abilities Benefits - IT Systems and Network Engineer Highly competitive salary, fantastic accommodation and flights IAW company policy Private Healthcare & additional benefits package Development opportunities SRT Marine Systems plc are an equal opportunity employer. We are committed to creating an inclusive working environment for all employees and actively encourage applications from allsectors of the community.
Jun 13, 2026
Full time
SRT Marine Systems plc (SRT) are a market leader in its domain of international marine surveillance technology and systems. We are respected, established and an ambitious multi-national company headquartered in the UK with a global customer base. The company has a global impact in the marine domain by leading the next generation of Maritime Domain Awareness 'MDA' technologies, products and systems that significantly enhance, security, safety and environment protection and sustainability. Our customers are worldwide and range from the largest national coast guards to individual vessel owners. SRT is an exciting company where high quality results are rewarded. We are ambitious and are constantly seeking to innovate to deliver better products and services to our customers. We strive to make SRT a rewarding and challenging place to work where talented hard-working individuals have the opportunity to make a real impact across the marine world. Role Overview This role is ideal for a talented and ambitious professional IT Systems and Network Engineer. The role of IT Systems and Network Engineer entails being responsible for, the installation, configuration and commissioning of complex network servers, PC's and other systems such as CCTV and building monitoring systems that make up our maritime surveillance systems. Along with their ongoing maintenance and issue trouble shooting and resolution. Please note: The role of IT Systems and Network Engineer is a role where you will travel globally for our projects, whether this is the Middle East, Far East, South East Asia, Africa's region - you will be expected to travel and live in country with an agreed rotation period up to 12 weeks in-country, 2 weeks home. Responsibilities - IT Systems and Network Engineer Configuration and deployment of networked servers, storage, network (hardware and related software packages) and other IT system support infrastructure Check and validate installations, and provide reports Configuration and troubleshooting of different types of connectivity systems Monitor system performance, undertake trouble shooting and resolution and implementation of software patches and hardware replacements Support and train customer internal IT departments and technicians to enable them to take operational ownership and responsibility of the systems we have supplied - day to day maintenance, issue identification and resolution Maintain good document trails of system changes and updates Requirements - IT Systems and Network Engineer ESSENTIAL - A minimum of 5 years network IT system setup and management experience in either commercial or industrial environments ESSENTIAL - Professional English language - spoken and written ESSENTIAL - Deep understanding of IT networks and server system configurations and set up - in particular Windows/Linux servers and networking (TCP/IP, DNS, VPN) Experience with virtualisation (VMware/Hyper-V) and cloud platforms (AWS/Azure) advantageous Strong understanding of IT security and data protection best practices Strong analytical and problem-solving skills Excellent teamwork and communication abilities Benefits - IT Systems and Network Engineer Highly competitive salary, fantastic accommodation and flights IAW company policy Private Healthcare & additional benefits package Development opportunities SRT Marine Systems plc are an equal opportunity employer. We are committed to creating an inclusive working environment for all employees and actively encourage applications from allsectors of the community.
SRT Marine Systems plc (SRT) is a market leader in the domain of international marine surveillance technology and systems. We are a respected, established, and an ambitious multi-national company headquartered in the UK with a global customer base. The company has a worldwide impact in the marine sector by leading the next generation of maritime domain awareness technologies "MDA", products, and systems that significantly enhance security, safety, environmental protection, and sustainability. Our customers are global and range from the largest national coast guards to individual vessel owners. SRT is an exciting company where high-quality results are rewarded. We are ambitious and constantly seek to innovate in order to deliver better products and services to our customers. We strive to make SRT a rewarding and challenging place to work, where talented, hard-working individuals have the opportunity to make a real impact across the marine industry. We are seeking a Sensor Software Engineer to design, develop, and integrate sensor capabilities within a Marine Domain Awareness (MDA) platform. The role focuses on ingesting, controlling, and processing data from coastal surveillance cameras, radio direction finders (RDF), radar, AIS, and other maritime sensors, and exposing this data in a consistent, operationally robust format. The role of Sensor Software Engineer is a hands-on engineering role requiring strong C#/.NET development skills, experience working with real-world sensor systems, and the ability to partner effectively with AI/ML components to deliver intelligent detection, classification, and tracking capabilities. About the role of Sensor Software Engineer - (not exhaustive): You'll work on the "sensors at the fringe" fixed and mobile surveillance equipment such as radars, cameras, RDF, AIS, and other specialist maritime sensors. Your mission as a Sensor Software Engineer will be to integrate, calibrate, and optimise these systems in non-production environments, building the software that makes their outputs usable for downstream systems and training our Delivery Team for field deployment. The role of Sensor Software Engineer spans multi-domain sensor fusion, AI-assisted analysis, anomaly detection, augmented reality, autonomous sentry operation, and evidence collection. You'll work closely with colleagues across software, hardware, data science, and infrastructure to bring innovative, high-performance edge solutions to life. Sensor Integration & Control Develop integrations with maritime sensors including: Coastal surveillance cameras (e.g. PTZ, thermal, EO/IR) Radio Direction Finders (RDF) Radar and AIS data sources Implement control interfaces (e.g. PTZ, presets, tracking handoff) Work with proprietary and undocumented APIs where required Backend Development (.NET) Build robust services using C# and .NET Develop APIs and services for downstream consumers Optimise for performance, reliability, and low-latency processing Work within distributed, containerised environments System Integration Work across a distributed system (e.g. message brokers, microservices) Integrate with existing platform components and abstraction layers Support deployments in on-prem / air-gapped environments Required Skills & Experience Core Engineering Strong experience in C# and .NET (Core / .NET 6+) Solid understanding of distributed systems and event-driven architectures Sensor / Domain Experience Experience integrating or working with any of: Surveillance cameras (PTZ, ONVIF, RTSP, video streams) Radio systems or RDF Radar, AIS, or similar telemetry sources Comfortable working with hardware interfaces and imperfect APIs Systems & Infrastructure Experience with: Messaging systems (e.g. RabbitMQ or similar) Containerisation (Docker) Linux-based deployments Understanding of performance, scaling, and resilience challenges Desirable Experience Experience in maritime, defence, or surveillance domains Familiarity with video processing pipelines Experience working in air-gapped or high-security environments SRT Marine Systems plc is an equal opportunity employer. We are committed to creating an inclusive environment for all employees and welcome applications from all backgrounds.
Jun 13, 2026
Full time
SRT Marine Systems plc (SRT) is a market leader in the domain of international marine surveillance technology and systems. We are a respected, established, and an ambitious multi-national company headquartered in the UK with a global customer base. The company has a worldwide impact in the marine sector by leading the next generation of maritime domain awareness technologies "MDA", products, and systems that significantly enhance security, safety, environmental protection, and sustainability. Our customers are global and range from the largest national coast guards to individual vessel owners. SRT is an exciting company where high-quality results are rewarded. We are ambitious and constantly seek to innovate in order to deliver better products and services to our customers. We strive to make SRT a rewarding and challenging place to work, where talented, hard-working individuals have the opportunity to make a real impact across the marine industry. We are seeking a Sensor Software Engineer to design, develop, and integrate sensor capabilities within a Marine Domain Awareness (MDA) platform. The role focuses on ingesting, controlling, and processing data from coastal surveillance cameras, radio direction finders (RDF), radar, AIS, and other maritime sensors, and exposing this data in a consistent, operationally robust format. The role of Sensor Software Engineer is a hands-on engineering role requiring strong C#/.NET development skills, experience working with real-world sensor systems, and the ability to partner effectively with AI/ML components to deliver intelligent detection, classification, and tracking capabilities. About the role of Sensor Software Engineer - (not exhaustive): You'll work on the "sensors at the fringe" fixed and mobile surveillance equipment such as radars, cameras, RDF, AIS, and other specialist maritime sensors. Your mission as a Sensor Software Engineer will be to integrate, calibrate, and optimise these systems in non-production environments, building the software that makes their outputs usable for downstream systems and training our Delivery Team for field deployment. The role of Sensor Software Engineer spans multi-domain sensor fusion, AI-assisted analysis, anomaly detection, augmented reality, autonomous sentry operation, and evidence collection. You'll work closely with colleagues across software, hardware, data science, and infrastructure to bring innovative, high-performance edge solutions to life. Sensor Integration & Control Develop integrations with maritime sensors including: Coastal surveillance cameras (e.g. PTZ, thermal, EO/IR) Radio Direction Finders (RDF) Radar and AIS data sources Implement control interfaces (e.g. PTZ, presets, tracking handoff) Work with proprietary and undocumented APIs where required Backend Development (.NET) Build robust services using C# and .NET Develop APIs and services for downstream consumers Optimise for performance, reliability, and low-latency processing Work within distributed, containerised environments System Integration Work across a distributed system (e.g. message brokers, microservices) Integrate with existing platform components and abstraction layers Support deployments in on-prem / air-gapped environments Required Skills & Experience Core Engineering Strong experience in C# and .NET (Core / .NET 6+) Solid understanding of distributed systems and event-driven architectures Sensor / Domain Experience Experience integrating or working with any of: Surveillance cameras (PTZ, ONVIF, RTSP, video streams) Radio systems or RDF Radar, AIS, or similar telemetry sources Comfortable working with hardware interfaces and imperfect APIs Systems & Infrastructure Experience with: Messaging systems (e.g. RabbitMQ or similar) Containerisation (Docker) Linux-based deployments Understanding of performance, scaling, and resilience challenges Desirable Experience Experience in maritime, defence, or surveillance domains Familiarity with video processing pipelines Experience working in air-gapped or high-security environments SRT Marine Systems plc is an equal opportunity employer. We are committed to creating an inclusive environment for all employees and welcome applications from all backgrounds.
SRT Marine Systems plc (SRT) is a market leader in the domain of international marine surveillance technology and systems. We are a respected, established, and an ambitious multi-national company headquartered in the UK with a global customer base. The company has a worldwide impact in the marine sector by leading the next generation of maritime domain awareness technologies "MDA", products, and systems that significantly enhance security, safety, environmental protection, and sustainability. Our customers are global and range from the largest national coast guards to individual vessel owners. SRT is an exciting company where high-quality results are rewarded. We are ambitious and constantly seek to innovate in order to deliver better products and services to our customers. We strive to make SRT a rewarding and challenging place to work, where talented, hard-working individuals have the opportunity to make a real impact across the marine industry. We are seeking a Sensor Software Engineer to design, develop, and integrate sensor capabilities within a Marine Domain Awareness (MDA) platform. The role focuses on ingesting, controlling, and processing data from coastal surveillance cameras, radio direction finders (RDF), radar, AIS, and other maritime sensors, and exposing this data in a consistent, operationally robust format. The role of Sensor Software Engineer is a hands-on engineering role requiring strong C#/.NET development skills, experience working with real-world sensor systems, and the ability to partner effectively with AI/ML components to deliver intelligent detection, classification, and tracking capabilities. About the role of Sensor Software Engineer - (not exhaustive): You'll work on the "sensors at the fringe" fixed and mobile surveillance equipment such as radars, cameras, RDF, AIS, and other specialist maritime sensors. Your mission as a Sensor Software Engineer will be to integrate, calibrate, and optimise these systems in non-production environments, building the software that makes their outputs usable for downstream systems and training our Delivery Team for field deployment. The role of Sensor Software Engineer spans multi-domain sensor fusion, AI-assisted analysis, anomaly detection, augmented reality, autonomous sentry operation, and evidence collection. You'll work closely with colleagues across software, hardware, data science, and infrastructure to bring innovative, high-performance edge solutions to life. Sensor Integration & Control Develop integrations with maritime sensors including: Coastal surveillance cameras (e.g. PTZ, thermal, EO/IR) Radio Direction Finders (RDF) Radar and AIS data sources Implement control interfaces (e.g. PTZ, presets, tracking handoff) Work with proprietary and undocumented APIs where required Backend Development (.NET) Build robust services using C# and .NET Develop APIs and services for downstream consumers Optimise for performance, reliability, and low-latency processing Work within distributed, containerised environments System Integration Work across a distributed system (e.g. message brokers, microservices) Integrate with existing platform components and abstraction layers Support deployments in on-prem / air-gapped environments Required Skills & Experience Core Engineering Strong experience in C# and .NET (Core / .NET 6+) Solid understanding of distributed systems and event-driven architectures Sensor / Domain Experience Experience integrating or working with any of: Surveillance cameras (PTZ, ONVIF, RTSP, video streams) Radio systems or RDF Radar, AIS, or similar telemetry sources Comfortable working with hardware interfaces and imperfect APIs Systems & Infrastructure Experience with: Messaging systems (e.g. RabbitMQ or similar) Containerisation (Docker) Linux-based deployments Understanding of performance, scaling, and resilience challenges Desirable Experience Experience in maritime, defence, or surveillance domains Familiarity with video processing pipelines Experience working in air-gapped or high-security environments SRT Marine Systems plc is an equal opportunity employer. We are committed to creating an inclusive environment for all employees and welcome applications from all backgrounds.
Jun 13, 2026
Full time
SRT Marine Systems plc (SRT) is a market leader in the domain of international marine surveillance technology and systems. We are a respected, established, and an ambitious multi-national company headquartered in the UK with a global customer base. The company has a worldwide impact in the marine sector by leading the next generation of maritime domain awareness technologies "MDA", products, and systems that significantly enhance security, safety, environmental protection, and sustainability. Our customers are global and range from the largest national coast guards to individual vessel owners. SRT is an exciting company where high-quality results are rewarded. We are ambitious and constantly seek to innovate in order to deliver better products and services to our customers. We strive to make SRT a rewarding and challenging place to work, where talented, hard-working individuals have the opportunity to make a real impact across the marine industry. We are seeking a Sensor Software Engineer to design, develop, and integrate sensor capabilities within a Marine Domain Awareness (MDA) platform. The role focuses on ingesting, controlling, and processing data from coastal surveillance cameras, radio direction finders (RDF), radar, AIS, and other maritime sensors, and exposing this data in a consistent, operationally robust format. The role of Sensor Software Engineer is a hands-on engineering role requiring strong C#/.NET development skills, experience working with real-world sensor systems, and the ability to partner effectively with AI/ML components to deliver intelligent detection, classification, and tracking capabilities. About the role of Sensor Software Engineer - (not exhaustive): You'll work on the "sensors at the fringe" fixed and mobile surveillance equipment such as radars, cameras, RDF, AIS, and other specialist maritime sensors. Your mission as a Sensor Software Engineer will be to integrate, calibrate, and optimise these systems in non-production environments, building the software that makes their outputs usable for downstream systems and training our Delivery Team for field deployment. The role of Sensor Software Engineer spans multi-domain sensor fusion, AI-assisted analysis, anomaly detection, augmented reality, autonomous sentry operation, and evidence collection. You'll work closely with colleagues across software, hardware, data science, and infrastructure to bring innovative, high-performance edge solutions to life. Sensor Integration & Control Develop integrations with maritime sensors including: Coastal surveillance cameras (e.g. PTZ, thermal, EO/IR) Radio Direction Finders (RDF) Radar and AIS data sources Implement control interfaces (e.g. PTZ, presets, tracking handoff) Work with proprietary and undocumented APIs where required Backend Development (.NET) Build robust services using C# and .NET Develop APIs and services for downstream consumers Optimise for performance, reliability, and low-latency processing Work within distributed, containerised environments System Integration Work across a distributed system (e.g. message brokers, microservices) Integrate with existing platform components and abstraction layers Support deployments in on-prem / air-gapped environments Required Skills & Experience Core Engineering Strong experience in C# and .NET (Core / .NET 6+) Solid understanding of distributed systems and event-driven architectures Sensor / Domain Experience Experience integrating or working with any of: Surveillance cameras (PTZ, ONVIF, RTSP, video streams) Radio systems or RDF Radar, AIS, or similar telemetry sources Comfortable working with hardware interfaces and imperfect APIs Systems & Infrastructure Experience with: Messaging systems (e.g. RabbitMQ or similar) Containerisation (Docker) Linux-based deployments Understanding of performance, scaling, and resilience challenges Desirable Experience Experience in maritime, defence, or surveillance domains Familiarity with video processing pipelines Experience working in air-gapped or high-security environments SRT Marine Systems plc is an equal opportunity employer. We are committed to creating an inclusive environment for all employees and welcome applications from all backgrounds.
SRT Marine Systems plc (SRT) are a market leader in its domain of international marine surveillance technology and systems. We are respected, established and an ambitious multi-national company headquartered in the UK with a global customer base. The company has a global impact in the marine domain by leading the next generation of Maritime Domain Awareness 'MDA' technologies, products and systems that significantly enhance, security, safety and environment protection and sustainability. Our customers are worldwide and range from the largest national coast guards to individual vessel owners. SRT is an exciting company where high quality results are rewarded. We are ambitious and are constantly seeking to innovate to deliver better products and services to our customers. We strive to make SRT a rewarding and challenging place to work where talented hard-working individuals have the opportunity to make a real impact across the marine world. Role Overview This role is ideal for a talented and ambitious professional IT Systems and Network Engineer. The role of IT Systems and Network Engineer entails being responsible for, the installation, configuration and commissioning of complex network servers, PC's and other systems such as CCTV and building monitoring systems that make up our maritime surveillance systems. Along with their ongoing maintenance and issue trouble shooting and resolution. Please note: The role of IT Systems and Network Engineer is a role where you will travel globally for our projects, whether this is the Middle East, Far East, South East Asia, Africa's region - you will be expected to travel and live in country with an agreed rotation period up to 12 weeks in-country,2 weeks home. Responsibilities - IT Systems and Network Engineer Configuration and deployment of networked servers, storage, network (hardware and related software packages) and other IT system support infrastructure Check and validate installations, and provide reports Configuration and troubleshooting of different types of connectivity systems Monitor system performance, undertake trouble shooting and resolution and implementation of software patches and hardware replacements Support and train customer internal IT departments and technicians to enable them to take operational ownership and responsibility of the systems we have supplied - day to day maintenance, issue identification and resolution Maintain good document trails of system changes and updates Requirements - IT Systems and Network Engineer ESSENTIAL - A minimum of 5 years network IT system setup and management experience in either commercial or industrial environments ESSENTIAL - Professional English language - spoken and written ESSENTIAL - Deep understanding of IT networks and server system configurations and set up - in particular Windows/Linux servers and networking (TCP/IP, DNS, VPN) Experience with virtualisation (VMware/Hyper-V) and cloud platforms (AWS/Azure) advantageous Strong understanding of IT security and data protection best practices Strong analytical and problem-solving skills Excellent teamwork and communication abilities Benefits - IT Systems and Network Engineer Highly competitive salary, fantastic accommodation and flights IAW company policy Private Healthcare & additional benefits package Development opportunities SRT Marine Systems plc are an equal opportunity employer. We are committed to creating an inclusive working environment for all employees and actively encourage applications from all sectors of the community.
Jun 13, 2026
Full time
SRT Marine Systems plc (SRT) are a market leader in its domain of international marine surveillance technology and systems. We are respected, established and an ambitious multi-national company headquartered in the UK with a global customer base. The company has a global impact in the marine domain by leading the next generation of Maritime Domain Awareness 'MDA' technologies, products and systems that significantly enhance, security, safety and environment protection and sustainability. Our customers are worldwide and range from the largest national coast guards to individual vessel owners. SRT is an exciting company where high quality results are rewarded. We are ambitious and are constantly seeking to innovate to deliver better products and services to our customers. We strive to make SRT a rewarding and challenging place to work where talented hard-working individuals have the opportunity to make a real impact across the marine world. Role Overview This role is ideal for a talented and ambitious professional IT Systems and Network Engineer. The role of IT Systems and Network Engineer entails being responsible for, the installation, configuration and commissioning of complex network servers, PC's and other systems such as CCTV and building monitoring systems that make up our maritime surveillance systems. Along with their ongoing maintenance and issue trouble shooting and resolution. Please note: The role of IT Systems and Network Engineer is a role where you will travel globally for our projects, whether this is the Middle East, Far East, South East Asia, Africa's region - you will be expected to travel and live in country with an agreed rotation period up to 12 weeks in-country,2 weeks home. Responsibilities - IT Systems and Network Engineer Configuration and deployment of networked servers, storage, network (hardware and related software packages) and other IT system support infrastructure Check and validate installations, and provide reports Configuration and troubleshooting of different types of connectivity systems Monitor system performance, undertake trouble shooting and resolution and implementation of software patches and hardware replacements Support and train customer internal IT departments and technicians to enable them to take operational ownership and responsibility of the systems we have supplied - day to day maintenance, issue identification and resolution Maintain good document trails of system changes and updates Requirements - IT Systems and Network Engineer ESSENTIAL - A minimum of 5 years network IT system setup and management experience in either commercial or industrial environments ESSENTIAL - Professional English language - spoken and written ESSENTIAL - Deep understanding of IT networks and server system configurations and set up - in particular Windows/Linux servers and networking (TCP/IP, DNS, VPN) Experience with virtualisation (VMware/Hyper-V) and cloud platforms (AWS/Azure) advantageous Strong understanding of IT security and data protection best practices Strong analytical and problem-solving skills Excellent teamwork and communication abilities Benefits - IT Systems and Network Engineer Highly competitive salary, fantastic accommodation and flights IAW company policy Private Healthcare & additional benefits package Development opportunities SRT Marine Systems plc are an equal opportunity employer. We are committed to creating an inclusive working environment for all employees and actively encourage applications from all sectors of the community.
SRT Marine Systems plc (SRT) are a market leader in its domain of international marine surveillance technology and systems. We are respected, established and an ambitious multi-national company headquartered in the UK with a global customer base. The company has a global impact in the marine domain by leading the next generation of Maritime Domain Awareness 'MDA' technologies, products and systems that significantly enhance, security, safety and environment protection and sustainability. Our customers are worldwide and range from the largest national coast guards to individual vessel owners. SRT is an exciting company where high quality results are rewarded. We are ambitious and are constantly seeking to innovate to deliver better products and services to our customers. We strive to make SRT a rewarding and challenging place to work where talented hard-working individuals have the opportunity to make a real impact across the marine world. Role Overview This role is ideal for a talented and ambitious professional IT Systems and Network Engineer. The role of IT Systems and Network Engineer entails being responsible for, the installation, configuration and commissioning of complex network servers, PC's and other systems such as CCTV and building monitoring systems that make up our maritime surveillance systems. Along with their ongoing maintenance and issue trouble shooting and resolution. Please note: The role of IT Systems and Network Engineer is a role where you will travel globally for our projects, whether this is the Middle East, Far East, South East Asia, Africa's region - you will be expected to travel and live in country with an agreed rotation period up to 12 weeks in-country,2 weeks home. Responsibilities - IT Systems and Network Engineer Configuration and deployment of networked servers, storage, network (hardware and related software packages) and other IT system support infrastructure Check and validate installations, and provide reports Configuration and troubleshooting of different types of connectivity systems Monitor system performance, undertake trouble shooting and resolution and implementation of software patches and hardware replacements Support and train customer internal IT departments and technicians to enable them to take operational ownership and responsibility of the systems we have supplied - day to day maintenance, issue identification and resolution Maintain good document trails of system changes and updates Requirements - IT Systems and Network Engineer ESSENTIAL - A minimum of 5 years network IT system setup and management experience in either commercial or industrial environments ESSENTIAL - Professional English language - spoken and written ESSENTIAL - Deep understanding of IT networks and server system configurations and set up - in particular Windows/Linux servers and networking (TCP/IP, DNS, VPN) Experience with virtualisation (VMware/Hyper-V) and cloud platforms (AWS/Azure) advantageous Strong understanding of IT security and data protection best practices Strong analytical and problem-solving skills Excellent teamwork and communication abilities Benefits - IT Systems and Network Engineer Highly competitive salary, fantastic accommodation and flights IAW company policy Private Healthcare & additional benefits package Development opportunities SRT Marine Systems plc are an equal opportunity employer. We are committed to creating an inclusive working environment for all employees and actively encourage applications from all sectors of the community.
Jun 13, 2026
Full time
SRT Marine Systems plc (SRT) are a market leader in its domain of international marine surveillance technology and systems. We are respected, established and an ambitious multi-national company headquartered in the UK with a global customer base. The company has a global impact in the marine domain by leading the next generation of Maritime Domain Awareness 'MDA' technologies, products and systems that significantly enhance, security, safety and environment protection and sustainability. Our customers are worldwide and range from the largest national coast guards to individual vessel owners. SRT is an exciting company where high quality results are rewarded. We are ambitious and are constantly seeking to innovate to deliver better products and services to our customers. We strive to make SRT a rewarding and challenging place to work where talented hard-working individuals have the opportunity to make a real impact across the marine world. Role Overview This role is ideal for a talented and ambitious professional IT Systems and Network Engineer. The role of IT Systems and Network Engineer entails being responsible for, the installation, configuration and commissioning of complex network servers, PC's and other systems such as CCTV and building monitoring systems that make up our maritime surveillance systems. Along with their ongoing maintenance and issue trouble shooting and resolution. Please note: The role of IT Systems and Network Engineer is a role where you will travel globally for our projects, whether this is the Middle East, Far East, South East Asia, Africa's region - you will be expected to travel and live in country with an agreed rotation period up to 12 weeks in-country,2 weeks home. Responsibilities - IT Systems and Network Engineer Configuration and deployment of networked servers, storage, network (hardware and related software packages) and other IT system support infrastructure Check and validate installations, and provide reports Configuration and troubleshooting of different types of connectivity systems Monitor system performance, undertake trouble shooting and resolution and implementation of software patches and hardware replacements Support and train customer internal IT departments and technicians to enable them to take operational ownership and responsibility of the systems we have supplied - day to day maintenance, issue identification and resolution Maintain good document trails of system changes and updates Requirements - IT Systems and Network Engineer ESSENTIAL - A minimum of 5 years network IT system setup and management experience in either commercial or industrial environments ESSENTIAL - Professional English language - spoken and written ESSENTIAL - Deep understanding of IT networks and server system configurations and set up - in particular Windows/Linux servers and networking (TCP/IP, DNS, VPN) Experience with virtualisation (VMware/Hyper-V) and cloud platforms (AWS/Azure) advantageous Strong understanding of IT security and data protection best practices Strong analytical and problem-solving skills Excellent teamwork and communication abilities Benefits - IT Systems and Network Engineer Highly competitive salary, fantastic accommodation and flights IAW company policy Private Healthcare & additional benefits package Development opportunities SRT Marine Systems plc are an equal opportunity employer. We are committed to creating an inclusive working environment for all employees and actively encourage applications from all sectors of the community.
We are looking for a C++ Software Engineer to work on defence projects. Key Responsibilities Develop and maintain C++ and Python software for complex systems Work on real-time data processing, simulation, or sensor integration Support verification, validation, and testing activities Build and maintain CI/CD pipelines (Linux and Windows) Collaborate in Agile teams (Scrum and Kanban) Key Skills Strong C++ experience (Python beneficial) Background in defence, aerospace, robotics, or simulation Experience with Linux, Git, and CI/CD tools Understanding of systems integration, testing, or comms protocols Ability to work with hardware or real-world data systems Experience with LiDAR or robotics systems Knowledge of Azure DevOps, SVN, or PLCs
Jun 13, 2026
Full time
We are looking for a C++ Software Engineer to work on defence projects. Key Responsibilities Develop and maintain C++ and Python software for complex systems Work on real-time data processing, simulation, or sensor integration Support verification, validation, and testing activities Build and maintain CI/CD pipelines (Linux and Windows) Collaborate in Agile teams (Scrum and Kanban) Key Skills Strong C++ experience (Python beneficial) Background in defence, aerospace, robotics, or simulation Experience with Linux, Git, and CI/CD tools Understanding of systems integration, testing, or comms protocols Ability to work with hardware or real-world data systems Experience with LiDAR or robotics systems Knowledge of Azure DevOps, SVN, or PLCs
Graduate Electrical Electronic / Software Engineer 30,000 - 35,000 + Full Industry Training + Career Progression + Flexi Hours Office based with some Hybrid, Commutable from Evesham, Cheltenham, Ledbury, Cirencester, Churchdown, Gloucester, Kineton and surrounding areas Are you a Graduate within Electrical Electronic Engineering, Software Engineering, Robotics or similar looking to receive full mentorship and training into Electrical Design and Electrical Engineering all whilst furthering your career and having the opportunity to progress as a task expert? This is a rare opportunity to join a close knit team of experts, that will invest in your career through hands on training, where you will be given countless opportunities to propel your career. Established since 1960, this company were re-established in 2020 in a management buyout, and since have grown from strength to strength, due to retirement and ongoing growth, they are expanding their team to plan for the future. This role will suit a Graduate within Electrical Electronic Engineering, Software Engineering, Robotics or similar looking to receive full mentorship and training into Electrical Design and Electrical Engineering all whilst furthering your career The Role: Completing Electrical Design and PLC / HMI Development once trained Working on Electrical panels and schematics from cradle to grave Full Training and opportunity to progress your career The Person: Highly interested in Electrical Engineering Reference number: (phone number removed) To apply for this role or to be considered for further roles, please click "Apply Now" or contact Harry Heal at Rise Technical Recruitment. Rise Technical Recruitment Ltd acts an employment agency for permanent roles and an employment business for temporary roles. The salary advertised is the bracket available for this position. The actual salary paid will be dependent on your level of experience, qualifications and skill set and will be decided by our client, the employer. Rise are not responsible or liable for any hiring decisions made by the end client. We are an equal opportunities company and welcome applications from all suitable candidates.
Jun 13, 2026
Full time
Graduate Electrical Electronic / Software Engineer 30,000 - 35,000 + Full Industry Training + Career Progression + Flexi Hours Office based with some Hybrid, Commutable from Evesham, Cheltenham, Ledbury, Cirencester, Churchdown, Gloucester, Kineton and surrounding areas Are you a Graduate within Electrical Electronic Engineering, Software Engineering, Robotics or similar looking to receive full mentorship and training into Electrical Design and Electrical Engineering all whilst furthering your career and having the opportunity to progress as a task expert? This is a rare opportunity to join a close knit team of experts, that will invest in your career through hands on training, where you will be given countless opportunities to propel your career. Established since 1960, this company were re-established in 2020 in a management buyout, and since have grown from strength to strength, due to retirement and ongoing growth, they are expanding their team to plan for the future. This role will suit a Graduate within Electrical Electronic Engineering, Software Engineering, Robotics or similar looking to receive full mentorship and training into Electrical Design and Electrical Engineering all whilst furthering your career The Role: Completing Electrical Design and PLC / HMI Development once trained Working on Electrical panels and schematics from cradle to grave Full Training and opportunity to progress your career The Person: Highly interested in Electrical Engineering Reference number: (phone number removed) To apply for this role or to be considered for further roles, please click "Apply Now" or contact Harry Heal at Rise Technical Recruitment. Rise Technical Recruitment Ltd acts an employment agency for permanent roles and an employment business for temporary roles. The salary advertised is the bracket available for this position. The actual salary paid will be dependent on your level of experience, qualifications and skill set and will be decided by our client, the employer. Rise are not responsible or liable for any hiring decisions made by the end client. We are an equal opportunities company and welcome applications from all suitable candidates.
