We are looking for somebody who wants to proceed with their career in the aerospace industry. Some of the responsibilities include: Assist in managing operations that involve hazardous materials Ensure that correct pressures are maintained in the feedlines during tests. Site preparation and maintenance, Conducting pressure and control system checks Instrument calibration and steam boiler operations. Assisting with instrumentation, installation, and removal of flight engines before and after hot fire tests. Required Skills Hands on mechanical fitter or engineering skills, ideally gained within an engineering-focused organisation or aerospace company. A proactive attitude toward safety and operational support.
Jun 23, 2026
Full time
We are looking for somebody who wants to proceed with their career in the aerospace industry. Some of the responsibilities include: Assist in managing operations that involve hazardous materials Ensure that correct pressures are maintained in the feedlines during tests. Site preparation and maintenance, Conducting pressure and control system checks Instrument calibration and steam boiler operations. Assisting with instrumentation, installation, and removal of flight engines before and after hot fire tests. Required Skills Hands on mechanical fitter or engineering skills, ideally gained within an engineering-focused organisation or aerospace company. A proactive attitude toward safety and operational support.
We are currently looking to recruit a skilled mobile heavy plant fitter to join our team in East Sussex. This role will include maintaining and repairing a variety of mechanical equipment, from a petrol saw to a 23 tonne excavator. Your duties would include but not be limited to: Conduct equipment repairs and maintenance tasks as assigned Read and interpret schematics to troubleshoot issues Utilise mechanical knowledge to diagnose problems and implement solutions Perform electrical repairs and installations Use hand tools proficiently for various tasks Dig into equipment systems to identify and rectify faults Weld components as needed Role Requirements: Proven experience in plant repair and maintenance Strong mechanical knowledge Proficiency in electrical systems troubleshooting and repair Skillful use of hand tools for mechanical work Capable of maintaining accurate and up to date records of work performed Good communication skills with the office as well as on site staff Can do attitude and willingness to go above and beyond If you are a dedicated fitter with a passion for maintaining and repairing machinery, we encourage you to apply for this exciting opportunity. Job Types: Full-time, Permanent Pay: £35,000.00-£45,000.00 per year Benefits: Company car Company pension On-site parking Licence/Certification: Driving Licence (required) Work Location: In person
Jun 23, 2026
Full time
We are currently looking to recruit a skilled mobile heavy plant fitter to join our team in East Sussex. This role will include maintaining and repairing a variety of mechanical equipment, from a petrol saw to a 23 tonne excavator. Your duties would include but not be limited to: Conduct equipment repairs and maintenance tasks as assigned Read and interpret schematics to troubleshoot issues Utilise mechanical knowledge to diagnose problems and implement solutions Perform electrical repairs and installations Use hand tools proficiently for various tasks Dig into equipment systems to identify and rectify faults Weld components as needed Role Requirements: Proven experience in plant repair and maintenance Strong mechanical knowledge Proficiency in electrical systems troubleshooting and repair Skillful use of hand tools for mechanical work Capable of maintaining accurate and up to date records of work performed Good communication skills with the office as well as on site staff Can do attitude and willingness to go above and beyond If you are a dedicated fitter with a passion for maintaining and repairing machinery, we encourage you to apply for this exciting opportunity. Job Types: Full-time, Permanent Pay: £35,000.00-£45,000.00 per year Benefits: Company car Company pension On-site parking Licence/Certification: Driving Licence (required) Work Location: In person
Are you an experienced engineer with a passion for mechanical equipment? CNC Recruitment is seeking a skilled Pipe Fitter to join our client based in the Mid Devon district Location: Tiverton Role Type: Field-based Contract: Permanent, 40 hours per week Salary: £32,000£36,000 per annum (paid overtime available) Key Responsibilities Assist with and carry out commercial biomass boiler installations and pr click apply for full job details
Jun 23, 2026
Full time
Are you an experienced engineer with a passion for mechanical equipment? CNC Recruitment is seeking a skilled Pipe Fitter to join our client based in the Mid Devon district Location: Tiverton Role Type: Field-based Contract: Permanent, 40 hours per week Salary: £32,000£36,000 per annum (paid overtime available) Key Responsibilities Assist with and carry out commercial biomass boiler installations and pr click apply for full job details
MOBILE PLANT FITTER Job Title - Mobile Plant Fitter Location - North Yorkshire / County Durham / Tyne and Wear Salary - £47000 Basic = O/T Shift - Days (Field-Based Role) Job Role of the Mobile Plant Fitter An excellent opportunity has arisen for a Mobile Plant Fitter to join a leading heavy industry and plant maintenance business covering North Yorkshire, County Durham, and Tyne and Wear. This is a field-based role where you will be responsible for the service, maintenance, and repair of a wide range of mobile and heavy plant equipment across multiple customer sites. You will work independently and as part of a wider engineering team, ensuring all plant machinery is maintained to a high standard, minimising downtime, and delivering a high level of service to clients. The role offers variety, autonomy, and the chance to work with a well-established and respected organisation. Sector - Heavy Plant / Industrial Engineering Non-Negotiable Requirements of the Mobile Plant Fitter Proven experience as a Mobile Plant Fitter or Plant Engineer. Strong mechanical fault-finding and repair skills. Experience working on heavy plant, construction machinery, or industrial equipment. Full UK driving licence. Essential Requirements for the Mobile Plant Fitter Mechanical engineering background. Experience with servicing, maintenance, and breakdown repair of plant equipment. Ability to work independently and manage workload across multiple sites. Strong diagnostic and problem-solving skills. Desirable Requirements for the Mobile Plant Fitter Hydraulics and pneumatics experience. Electrical fault-finding knowledge (basic to intermediate). Experience working in a field-based or mobile engineering role. NVQ or equivalent qualification in Mechanical Engineering or Plant Maintenance. The Mobile Plant Fitter will benefit from: Competitive salary depending on experience. Company van and fuel card (if applicable). Overtime opportunities. Training and development within a growing business. Stable, long-term opportunity within the heavy plant sector. Varied field-based role with autonomy and responsibility. If you are interested in this role and feel that you have the right skills, then please click apply at the bottom of this advert. For further details contact Kieran Wall at Pioneer Selection. As a registered candidate with Pioneer Selection Ltd, you automatically become eligible for our referral scheme. You will receive £250 for every candidate we place in permanent employment who has been recommended by you. Terms and Conditions apply; please see our website for further details.
Jun 23, 2026
Full time
MOBILE PLANT FITTER Job Title - Mobile Plant Fitter Location - North Yorkshire / County Durham / Tyne and Wear Salary - £47000 Basic = O/T Shift - Days (Field-Based Role) Job Role of the Mobile Plant Fitter An excellent opportunity has arisen for a Mobile Plant Fitter to join a leading heavy industry and plant maintenance business covering North Yorkshire, County Durham, and Tyne and Wear. This is a field-based role where you will be responsible for the service, maintenance, and repair of a wide range of mobile and heavy plant equipment across multiple customer sites. You will work independently and as part of a wider engineering team, ensuring all plant machinery is maintained to a high standard, minimising downtime, and delivering a high level of service to clients. The role offers variety, autonomy, and the chance to work with a well-established and respected organisation. Sector - Heavy Plant / Industrial Engineering Non-Negotiable Requirements of the Mobile Plant Fitter Proven experience as a Mobile Plant Fitter or Plant Engineer. Strong mechanical fault-finding and repair skills. Experience working on heavy plant, construction machinery, or industrial equipment. Full UK driving licence. Essential Requirements for the Mobile Plant Fitter Mechanical engineering background. Experience with servicing, maintenance, and breakdown repair of plant equipment. Ability to work independently and manage workload across multiple sites. Strong diagnostic and problem-solving skills. Desirable Requirements for the Mobile Plant Fitter Hydraulics and pneumatics experience. Electrical fault-finding knowledge (basic to intermediate). Experience working in a field-based or mobile engineering role. NVQ or equivalent qualification in Mechanical Engineering or Plant Maintenance. The Mobile Plant Fitter will benefit from: Competitive salary depending on experience. Company van and fuel card (if applicable). Overtime opportunities. Training and development within a growing business. Stable, long-term opportunity within the heavy plant sector. Varied field-based role with autonomy and responsibility. If you are interested in this role and feel that you have the right skills, then please click apply at the bottom of this advert. For further details contact Kieran Wall at Pioneer Selection. As a registered candidate with Pioneer Selection Ltd, you automatically become eligible for our referral scheme. You will receive £250 for every candidate we place in permanent employment who has been recommended by you. Terms and Conditions apply; please see our website for further details.
Workshop Fleet Technician Vehicle Management Unit - Monday to Friday (days) Your career path will see you upskilled on new products and put through various courses that will make you miore effifcient in your role. We are looking for a qualified and time served HGV Technician who can demonstrate a thorough understanding of commercial vehicle mechanical dynamics. You can expect to be situated in a positive and vibrant working environment where your efforts will be rewarded. A skills shortage can be trained by way of upskilling. What cannot be trained however is the right attitude and the desire to give your clients a first class service. You will be carrying out inspections to a varied and diverse fleet. You could be working on main dealer heavy goods vehicles (HGV) refuse collection vehicles, road sweepers, hook loaders, light commercials (vans), trailers and tippers- The type of work you can expect to be carrying out includes (but is not limited to) Routine (and preventative) maintenance MOT preparation Scheduled servicing to DVSA standards 6 (or 8) weekly inspections Correction of running defects Chassis and fabrication work Hydraulics and pneumatics Improvement of vehicle standards Electrical and wiring inspections and corrections Ideally you will be fully qualified (City & Guilds), NVQ or equivalent. Additional accreditations such as IRTEC would be desirable, as would a HGV Class 1 or licence. So what are you waiting for. Get in touch for further details and start that next journey on your career. HGV, heavy goods vehicle, commercial vehicle, RCV, refuse collection vehicle, tipper, sweeper, gritter, mechanic, vehicle engineer, vehicle technician, fitter, workshop. VMU
Jun 23, 2026
Full time
Workshop Fleet Technician Vehicle Management Unit - Monday to Friday (days) Your career path will see you upskilled on new products and put through various courses that will make you miore effifcient in your role. We are looking for a qualified and time served HGV Technician who can demonstrate a thorough understanding of commercial vehicle mechanical dynamics. You can expect to be situated in a positive and vibrant working environment where your efforts will be rewarded. A skills shortage can be trained by way of upskilling. What cannot be trained however is the right attitude and the desire to give your clients a first class service. You will be carrying out inspections to a varied and diverse fleet. You could be working on main dealer heavy goods vehicles (HGV) refuse collection vehicles, road sweepers, hook loaders, light commercials (vans), trailers and tippers- The type of work you can expect to be carrying out includes (but is not limited to) Routine (and preventative) maintenance MOT preparation Scheduled servicing to DVSA standards 6 (or 8) weekly inspections Correction of running defects Chassis and fabrication work Hydraulics and pneumatics Improvement of vehicle standards Electrical and wiring inspections and corrections Ideally you will be fully qualified (City & Guilds), NVQ or equivalent. Additional accreditations such as IRTEC would be desirable, as would a HGV Class 1 or licence. So what are you waiting for. Get in touch for further details and start that next journey on your career. HGV, heavy goods vehicle, commercial vehicle, RCV, refuse collection vehicle, tipper, sweeper, gritter, mechanic, vehicle engineer, vehicle technician, fitter, workshop. VMU
Ernest Gordon Recruitment
Stoke-on-trent, Staffordshire
Field Service Engineer (Heavy Plant & Construction Equipment) £20.00 - £21.50 per hour + Door-to-Door Pay + Overtime + Company Vehicle + Training + Company Benefits Stoke Are you a Mobile Plant Fitter with mechanical and/or electrical experience seeking a field-based role that offers door-to-door pay, regular overtime, and excellent long-term career stability with a growing engineering company? Do you click apply for full job details
Jun 23, 2026
Full time
Field Service Engineer (Heavy Plant & Construction Equipment) £20.00 - £21.50 per hour + Door-to-Door Pay + Overtime + Company Vehicle + Training + Company Benefits Stoke Are you a Mobile Plant Fitter with mechanical and/or electrical experience seeking a field-based role that offers door-to-door pay, regular overtime, and excellent long-term career stability with a growing engineering company? Do you click apply for full job details
HGV / Trailer Fitter We are seeking a skilled and motivated HGV / Trailer Fitter to join a growing engineering and transport support operation. This role offers the opportunity to work on a diverse fleet of HGVs, trailers, specialist transport equipment, and associated plant machinery, ensuring all vehicles and equipment are maintained to the highest standards of safety, reliability, and compliance. Based from a fully equipped workshop, you will be part of an experienced team responsible for servicing, repairing, inspecting, and fault-finding across a varied fleet that supports operations throughout the UK. This is a hands-on position suited to an experienced fitter who enjoys working on a range of mechanical, hydraulic, pneumatic, and electrical systems. Key Responsibilities Carry out routine servicing, maintenance, and repairs on HGVs, trailers, and specialist transport equipment. Diagnose and rectify mechanical, hydraulic, pneumatic, and electrical faults. Conduct trailer inspections, MOT preparations, and safety checks in line with DVSA requirements. Perform repairs on braking systems, suspension, axle assemblies, lighting systems, and running gear. Maintain and repair ancillary equipment including generators, lighting towers, and small plant machinery. Complete all maintenance records and inspection documentation accurately. Ensure all work is completed safely and in accordance with company procedures and industry regulations. Support breakdown response and emergency repairs when required. Assist with fleet compliance, vehicle inspections, and preventative maintenance schedules. About You Proven experience as an HGV Technician, HGV Fitter, Trailer Fitter, Fleet Engineer, or similar role. Relevant engineering qualification, apprenticeship, or time-served experience. Strong understanding of HGV and trailer maintenance practices. Experience working with braking systems, hydraulics, pneumatics, suspension systems, and vehicle electrics. Ability to diagnose faults and carry out repairs independently. Knowledge of DVSA inspection standards and vehicle compliance requirements. Welding and fabrication experience would be advantageous. Strong attention to detail and commitment to safe working practices. Full UK driving licence (HGV licence advantageous but not essential). Positive attitude with the ability to work both independently and as part of a team. What's on Offer Competitive salary and overtime opportunities - 7.5 hours overtime guaranteed per week Long-term career stability within a well-established engineering operation. Exposure to a varied fleet of HGVs, trailers, and specialist equipment. Ongoing training and development opportunities. Company pension scheme. Life assurance and additional employee benefits. Employee rewards and recognition programme. Annual bonus scheme Important Information: We endeavour to process your personal data in a fair and transparent manner. In applying for this role, NMS Recruit will be acting within your interest and will contact you in relation to the role, either by email, phone or text message. For more information see our Privacy Policy on our website. It is important you are aware of your individual rights and the provisions the company has put in place to protect your data. If you would like further information on the policy or GDPR please get in touch with us here.
Jun 23, 2026
Full time
HGV / Trailer Fitter We are seeking a skilled and motivated HGV / Trailer Fitter to join a growing engineering and transport support operation. This role offers the opportunity to work on a diverse fleet of HGVs, trailers, specialist transport equipment, and associated plant machinery, ensuring all vehicles and equipment are maintained to the highest standards of safety, reliability, and compliance. Based from a fully equipped workshop, you will be part of an experienced team responsible for servicing, repairing, inspecting, and fault-finding across a varied fleet that supports operations throughout the UK. This is a hands-on position suited to an experienced fitter who enjoys working on a range of mechanical, hydraulic, pneumatic, and electrical systems. Key Responsibilities Carry out routine servicing, maintenance, and repairs on HGVs, trailers, and specialist transport equipment. Diagnose and rectify mechanical, hydraulic, pneumatic, and electrical faults. Conduct trailer inspections, MOT preparations, and safety checks in line with DVSA requirements. Perform repairs on braking systems, suspension, axle assemblies, lighting systems, and running gear. Maintain and repair ancillary equipment including generators, lighting towers, and small plant machinery. Complete all maintenance records and inspection documentation accurately. Ensure all work is completed safely and in accordance with company procedures and industry regulations. Support breakdown response and emergency repairs when required. Assist with fleet compliance, vehicle inspections, and preventative maintenance schedules. About You Proven experience as an HGV Technician, HGV Fitter, Trailer Fitter, Fleet Engineer, or similar role. Relevant engineering qualification, apprenticeship, or time-served experience. Strong understanding of HGV and trailer maintenance practices. Experience working with braking systems, hydraulics, pneumatics, suspension systems, and vehicle electrics. Ability to diagnose faults and carry out repairs independently. Knowledge of DVSA inspection standards and vehicle compliance requirements. Welding and fabrication experience would be advantageous. Strong attention to detail and commitment to safe working practices. Full UK driving licence (HGV licence advantageous but not essential). Positive attitude with the ability to work both independently and as part of a team. What's on Offer Competitive salary and overtime opportunities - 7.5 hours overtime guaranteed per week Long-term career stability within a well-established engineering operation. Exposure to a varied fleet of HGVs, trailers, and specialist equipment. Ongoing training and development opportunities. Company pension scheme. Life assurance and additional employee benefits. Employee rewards and recognition programme. Annual bonus scheme Important Information: We endeavour to process your personal data in a fair and transparent manner. In applying for this role, NMS Recruit will be acting within your interest and will contact you in relation to the role, either by email, phone or text message. For more information see our Privacy Policy on our website. It is important you are aware of your individual rights and the provisions the company has put in place to protect your data. If you would like further information on the policy or GDPR please get in touch with us here.
MET Technician Location: Bristol Annual Salary: Up to £50,000 Hours: Mon-Fri, 40h week Benefits: Flexibility and early starts and finishes available, 30 Days holiday Job Description: Our client is looking for a talented and efficient MET Strip Fitter / MET Technician to join this leading team. You will be repairing damaged vehicles in line with manufacturers' specifications within a state-of-the-art body shop, utilising modern equipment and techniques. Qualifications Required for an MET Strip Fitter / MET Technician Will have served a recognised apprenticeship as a MET Strip Fitter / MET Technician and gained a technical qualification (such as NVQ / ATA / IMI / SVQ) Must have previous experience working as a MET Technician / MET Strip Fitter within a busy body shop Strong team player with self-motivation to earn bonus hours Experience with Geometry work and 4-wheel alignment Sound up-to-date knowledge of vehicle repair techniques Diagnostic training Duties of an MET Strip Fitter / MET Technician: Work efficiently in a fast-paced accident repair centre Follow correct repair techniques and work to factory specifications Conduct detailed inspections to diagnose mechanical and electrical issues Repair or replace damaged mechanical, electrical, and trim components Disassemble and reassemble vehicle parts as required Use diagnostic tools to identify and fix system faults Perform quality checks to ensure work meets industry standards Collaborate with colleagues to ensure smooth workflow Maintain accurate records of work completed Adhere to all safety protocols and industry regulations Click 'Apply Now' if interested in joining this dynamic team. INDLP
Jun 23, 2026
Full time
MET Technician Location: Bristol Annual Salary: Up to £50,000 Hours: Mon-Fri, 40h week Benefits: Flexibility and early starts and finishes available, 30 Days holiday Job Description: Our client is looking for a talented and efficient MET Strip Fitter / MET Technician to join this leading team. You will be repairing damaged vehicles in line with manufacturers' specifications within a state-of-the-art body shop, utilising modern equipment and techniques. Qualifications Required for an MET Strip Fitter / MET Technician Will have served a recognised apprenticeship as a MET Strip Fitter / MET Technician and gained a technical qualification (such as NVQ / ATA / IMI / SVQ) Must have previous experience working as a MET Technician / MET Strip Fitter within a busy body shop Strong team player with self-motivation to earn bonus hours Experience with Geometry work and 4-wheel alignment Sound up-to-date knowledge of vehicle repair techniques Diagnostic training Duties of an MET Strip Fitter / MET Technician: Work efficiently in a fast-paced accident repair centre Follow correct repair techniques and work to factory specifications Conduct detailed inspections to diagnose mechanical and electrical issues Repair or replace damaged mechanical, electrical, and trim components Disassemble and reassemble vehicle parts as required Use diagnostic tools to identify and fix system faults Perform quality checks to ensure work meets industry standards Collaborate with colleagues to ensure smooth workflow Maintain accurate records of work completed Adhere to all safety protocols and industry regulations Click 'Apply Now' if interested in joining this dynamic team. INDLP
Owen Daniels are supporting a leading and well-established manufacturing and engineering business, is currently recruiting for an experienced Electro Mechanical Fitter Team Leader to join their growing operation based in Coventry.This is an excellent opportunity for a hands-on engineering professional with strong leadership experience to join a highly reputable company working across a wide range of rotating equipment including generators, AC/DC motors, pumps, and associated electro-mechanical systems.The RoleThe successful candidate will lead a small team of 6 engineers within the workshop, overseeing the repair, overhaul, assembly, and testing of electro-mechanical equipment while ensuring high standards of quality, safety, and productivity are maintained at all times.This is a hands-on position suited to someone from a manufacturing, service, or heavy engineering background who is comfortable both leading a team and supporting day-to-day engineering activities.Key Responsibilities Supervising and supporting a team of 6 electro-mechanical engineers/fitters Carrying out fault finding, servicing, repair, and overhaul work on: Generators AC/DC motors Pumps and rotating equipment Coordinating daily workshop activities and workloads Ensuring work is completed to customer specifications and deadlines Maintaining health & safety and quality standards throughout the workshop Providing technical support and guidance to the engineering team Supporting continuous improvement initiatives Candidate Requirements Previous experience working on generators, AC/DC motors, or rotating equipment Prior experience in a Team Leader, Supervisor, or Senior Engineer position Strong electro-mechanical fault-finding and repair capabilities Manufacturing, engineering, or industrial background Ability to read and interpret engineering drawings Excellent communication and organisational skills Engineering qualification or apprenticeship beneficial If this role is of interest, please apply now.
Jun 22, 2026
Full time
Owen Daniels are supporting a leading and well-established manufacturing and engineering business, is currently recruiting for an experienced Electro Mechanical Fitter Team Leader to join their growing operation based in Coventry.This is an excellent opportunity for a hands-on engineering professional with strong leadership experience to join a highly reputable company working across a wide range of rotating equipment including generators, AC/DC motors, pumps, and associated electro-mechanical systems.The RoleThe successful candidate will lead a small team of 6 engineers within the workshop, overseeing the repair, overhaul, assembly, and testing of electro-mechanical equipment while ensuring high standards of quality, safety, and productivity are maintained at all times.This is a hands-on position suited to someone from a manufacturing, service, or heavy engineering background who is comfortable both leading a team and supporting day-to-day engineering activities.Key Responsibilities Supervising and supporting a team of 6 electro-mechanical engineers/fitters Carrying out fault finding, servicing, repair, and overhaul work on: Generators AC/DC motors Pumps and rotating equipment Coordinating daily workshop activities and workloads Ensuring work is completed to customer specifications and deadlines Maintaining health & safety and quality standards throughout the workshop Providing technical support and guidance to the engineering team Supporting continuous improvement initiatives Candidate Requirements Previous experience working on generators, AC/DC motors, or rotating equipment Prior experience in a Team Leader, Supervisor, or Senior Engineer position Strong electro-mechanical fault-finding and repair capabilities Manufacturing, engineering, or industrial background Ability to read and interpret engineering drawings Excellent communication and organisational skills Engineering qualification or apprenticeship beneficial If this role is of interest, please apply now.
Junior Mechanical Project Manager Bristol 65,000 - 80,000 + Travel Allowance + Stay Away Included + Discretionary Bonus + Pension + Holidays + Private Medical + Full Package + Progression + Immediate Start Take on the role of Junior Mechanical Project Manager with a leading technical main contractor delivering complex projects across the UK's rapidly growing mission-critical and industrial construction sectors. This is a fantastic opportunity for a hands-on mechanical professional - plumber, pipefitter, HVAC engineer or mechanical supervisor or looking to step into site management and progress within a major contractor environment. You'll join a business known for promoting from within and giving practical, site-based professionals the opportunity to move into construction and project management. This role suits someone with a strong tools background who understands site delivery and wants long-term career progression. Your Role as a Junior Mechanical Project Manager Will Include: Coordinating mechanical subcontractors, direct labour, and specialist trades on site. Monitoring progress against the programme and reporting into senior site leadership. Ensuring all mechanical works meet quality standards, drawings, and specifications. Attending site coordination and progress meetings. Maintaining strong health & safety standards and site compliance at all times. As a Junior Mechanical Project Manager, You Will Have: A strong mechanical background such as plumber, pipefitter, HVAC engineer, or mechanical supervisor. Experience working in industrial, pharmaceutical, manufacturing, or data-centre environments. Ambition to progress into construction or project management roles. Willingness to travel or stay away for projects when required. Strong communication and organisational skills with a proactive mindset.
Jun 22, 2026
Full time
Junior Mechanical Project Manager Bristol 65,000 - 80,000 + Travel Allowance + Stay Away Included + Discretionary Bonus + Pension + Holidays + Private Medical + Full Package + Progression + Immediate Start Take on the role of Junior Mechanical Project Manager with a leading technical main contractor delivering complex projects across the UK's rapidly growing mission-critical and industrial construction sectors. This is a fantastic opportunity for a hands-on mechanical professional - plumber, pipefitter, HVAC engineer or mechanical supervisor or looking to step into site management and progress within a major contractor environment. You'll join a business known for promoting from within and giving practical, site-based professionals the opportunity to move into construction and project management. This role suits someone with a strong tools background who understands site delivery and wants long-term career progression. Your Role as a Junior Mechanical Project Manager Will Include: Coordinating mechanical subcontractors, direct labour, and specialist trades on site. Monitoring progress against the programme and reporting into senior site leadership. Ensuring all mechanical works meet quality standards, drawings, and specifications. Attending site coordination and progress meetings. Maintaining strong health & safety standards and site compliance at all times. As a Junior Mechanical Project Manager, You Will Have: A strong mechanical background such as plumber, pipefitter, HVAC engineer, or mechanical supervisor. Experience working in industrial, pharmaceutical, manufacturing, or data-centre environments. Ambition to progress into construction or project management roles. Willingness to travel or stay away for projects when required. Strong communication and organisational skills with a proactive mindset.
MET (MECHANICAL, ELECTRICAL & TRIM) TECHNICIAN OTE: £45,000 MET (Mechanical, Electrical & Trim) Technician details: Basic Salary: £39,000+ DOE (Unlimited Overtime, Time Saved Bonus) Working Hours: Monday to Friday (42.5 hours per week) Flexi start times available Location: Wilmslow, Cheshire A skilled and motivated MET Technician (Mechanical, Electrical & Trim) / Strip Fitter is required for a busy, modern Bodyshop, well-equipped Bodyshop with the latest technology. You will be responsible for dismantling, repairing, and reassembling vehicles in line with manufacturer repair methods using the latest tools, equipment, and diagnostic systems. Working in a fast-paced accident repair centre, you will play a key role in ensuring vehicles are repaired safely, efficiently, and to the highest quality standards, with strong earning potential through bonus opportunities. You will receive ongoing training and development, especially in EV and emerging vehicle technologies, in a supportive, team-focused environment. Responsibilities of an MET (Mechanical, Electrical & Trim) Technician Carry out efficient removal and refitting (strip & fit) of mechanical, electrical, and trim components on a wide range of vehicles, including electric and hybrid models. Diagnose faults and complete mechanical and electrical repairs in line with manufacturer repair methods (MRMs). Use modern diagnostic equipment and follow manufacturer guidelines to ensure accurate repair and fault resolution. Interpret digital job cards, repair specifications, and technical data using Bodyshop management systems (e.g., Audatex, Autoflow). Support ADAS (Advanced Driver Assistance Systems) processes, including calibration awareness following vehicle repairs. Ensure all work meets BSI PAS 10125 standards, maintaining a strong focus on safety, compliance, and quality. Collaborate effectively with Panel Beaters, Paint Sprayers, and VDA teams to maintain workflow efficiency and maximise productivity. Skills and Qualifications of an MET (Mechanical, Electrical & Trim) Technician Recognised apprenticeship or Level 3 qualification in Vehicle Mechanical, Electrical & Trim (NVQ / IMI / SVQ / ATA), with a commitment to continuous professional development. Proven experience working as an MET (Mechanical, Electrical & Trim) Technician in a high-volume, fast-paced accident repair environment. Strong knowledge of modern vehicle systems, including electrical diagnostics, CAN systems, and hybrid/electric vehicle safety procedures. Competent in the use of diagnostic tools, repair method software, and digital workshop systems. Understanding of ADAS components and the importance of correct calibration processes and Geometry. High attention to detail, self-motivation, and ability to meet or exceed productivity targets while maintaining exceptional quality standards. If you think you are a good fit for this MET (Mechanical, Electrical & Trim) Technician role, please contact UK and state reference job number 53881. Don't worry if your CV is out of date - get in touch and we can work that out later. AutoSkills UK is a leading automotive recruitment specialist, providing both temporary and permanent staffing solutions from skilled trades through to senior management. We are always looking to connect with experienced Bodyshop professionals, including: Vehicle Damage Assessors / Estimators, Panel Beaters, Paint Sprayers, Vehicle Damage Assessors, Workshop Controllers, Bodyshop Managers, and Quality Controllers
Jun 22, 2026
Full time
MET (MECHANICAL, ELECTRICAL & TRIM) TECHNICIAN OTE: £45,000 MET (Mechanical, Electrical & Trim) Technician details: Basic Salary: £39,000+ DOE (Unlimited Overtime, Time Saved Bonus) Working Hours: Monday to Friday (42.5 hours per week) Flexi start times available Location: Wilmslow, Cheshire A skilled and motivated MET Technician (Mechanical, Electrical & Trim) / Strip Fitter is required for a busy, modern Bodyshop, well-equipped Bodyshop with the latest technology. You will be responsible for dismantling, repairing, and reassembling vehicles in line with manufacturer repair methods using the latest tools, equipment, and diagnostic systems. Working in a fast-paced accident repair centre, you will play a key role in ensuring vehicles are repaired safely, efficiently, and to the highest quality standards, with strong earning potential through bonus opportunities. You will receive ongoing training and development, especially in EV and emerging vehicle technologies, in a supportive, team-focused environment. Responsibilities of an MET (Mechanical, Electrical & Trim) Technician Carry out efficient removal and refitting (strip & fit) of mechanical, electrical, and trim components on a wide range of vehicles, including electric and hybrid models. Diagnose faults and complete mechanical and electrical repairs in line with manufacturer repair methods (MRMs). Use modern diagnostic equipment and follow manufacturer guidelines to ensure accurate repair and fault resolution. Interpret digital job cards, repair specifications, and technical data using Bodyshop management systems (e.g., Audatex, Autoflow). Support ADAS (Advanced Driver Assistance Systems) processes, including calibration awareness following vehicle repairs. Ensure all work meets BSI PAS 10125 standards, maintaining a strong focus on safety, compliance, and quality. Collaborate effectively with Panel Beaters, Paint Sprayers, and VDA teams to maintain workflow efficiency and maximise productivity. Skills and Qualifications of an MET (Mechanical, Electrical & Trim) Technician Recognised apprenticeship or Level 3 qualification in Vehicle Mechanical, Electrical & Trim (NVQ / IMI / SVQ / ATA), with a commitment to continuous professional development. Proven experience working as an MET (Mechanical, Electrical & Trim) Technician in a high-volume, fast-paced accident repair environment. Strong knowledge of modern vehicle systems, including electrical diagnostics, CAN systems, and hybrid/electric vehicle safety procedures. Competent in the use of diagnostic tools, repair method software, and digital workshop systems. Understanding of ADAS components and the importance of correct calibration processes and Geometry. High attention to detail, self-motivation, and ability to meet or exceed productivity targets while maintaining exceptional quality standards. If you think you are a good fit for this MET (Mechanical, Electrical & Trim) Technician role, please contact UK and state reference job number 53881. Don't worry if your CV is out of date - get in touch and we can work that out later. AutoSkills UK is a leading automotive recruitment specialist, providing both temporary and permanent staffing solutions from skilled trades through to senior management. We are always looking to connect with experienced Bodyshop professionals, including: Vehicle Damage Assessors / Estimators, Panel Beaters, Paint Sprayers, Vehicle Damage Assessors, Workshop Controllers, Bodyshop Managers, and Quality Controllers
Construction Superintendent (Contract - Outside IR35) Location: Scotland Contract Length: Approximately 4 months The Role We are seeking an experienced Construction Superintendent to oversee the safe and efficient delivery of a major mechanical installation project within a busy industrial construction environment. Key Responsibilities Manage daily construction activities across mechanical and multi-disciplined trades. Coordinate supervisors and site teams to ensure work is delivered safely and efficiently. Drive productivity and ensure construction activities meet project schedules and priorities. Liaise with engineering and project teams to support construction, testing and commissioning activities. Identify and resolve site issues that may impact progress. Enforce site safety standards, Permit to Work requirements and RAMS compliance. Ensure work is completed in accordance with project specifications, drawings and quality requirements. Monitor workforce performance and support effective supervision across all work fronts. Essential Requirements Previous experience as a Construction Superintendent, General Foreman or Senior Supervisor on industrial or construction projects. Strong background in mechanical installation, process pipework, fabrication or industrial construction. Experience managing supervisors and multi-disciplinary construction teams. Ability to interpret engineering drawings, P&IDs and isometrics. Good understanding of Permit to Work systems, RAMS and site safety requirements. Strong leadership, organisational and communication skills. Proven ability to manage competing priorities and solve problems in a fast-paced environment. Desirable SMSTS qualification. Mechanical trade background (e.g. Pipefitter, Welder, Mechanical Fitter). Experience in industrial, energy, petrochemical, pharmaceutical or process plant environments. Experience supporting testing, commissioning and project handover activities. Contract Details Outside IR35 Approx. 4-month duration Long-hours rotational working pattern with overtime opportunities Competitive rate, dependent on experience and qualification
Jun 22, 2026
Contractor
Construction Superintendent (Contract - Outside IR35) Location: Scotland Contract Length: Approximately 4 months The Role We are seeking an experienced Construction Superintendent to oversee the safe and efficient delivery of a major mechanical installation project within a busy industrial construction environment. Key Responsibilities Manage daily construction activities across mechanical and multi-disciplined trades. Coordinate supervisors and site teams to ensure work is delivered safely and efficiently. Drive productivity and ensure construction activities meet project schedules and priorities. Liaise with engineering and project teams to support construction, testing and commissioning activities. Identify and resolve site issues that may impact progress. Enforce site safety standards, Permit to Work requirements and RAMS compliance. Ensure work is completed in accordance with project specifications, drawings and quality requirements. Monitor workforce performance and support effective supervision across all work fronts. Essential Requirements Previous experience as a Construction Superintendent, General Foreman or Senior Supervisor on industrial or construction projects. Strong background in mechanical installation, process pipework, fabrication or industrial construction. Experience managing supervisors and multi-disciplinary construction teams. Ability to interpret engineering drawings, P&IDs and isometrics. Good understanding of Permit to Work systems, RAMS and site safety requirements. Strong leadership, organisational and communication skills. Proven ability to manage competing priorities and solve problems in a fast-paced environment. Desirable SMSTS qualification. Mechanical trade background (e.g. Pipefitter, Welder, Mechanical Fitter). Experience in industrial, energy, petrochemical, pharmaceutical or process plant environments. Experience supporting testing, commissioning and project handover activities. Contract Details Outside IR35 Approx. 4-month duration Long-hours rotational working pattern with overtime opportunities Competitive rate, dependent on experience and qualification
Multi Skilled Bodyshop Technician Multi Skilled Bodyshop Technician details: Basic Salary:£46,000 - £49,000 + Time Saved Bonus Working Hours:Monday - Friday (45 hours per week) Location:Aberdeen Central We are currently recruiting for a highly skilled Multiskilled Bodyshop Technician to join a busy, modern accident repair centre. This is an excellent opportunity for a technician proficient across Panel Beating, Paint Spraying, and MET (Mechanical, Electrical & Trim / Strip & Fit), looking to maximise earning potential in a high-performance environment. Working with the latest tools, equipment, and manufacturer repair methods, you will be responsible for completing end-to-end repairs to the highest quality standards while maintaining efficiency and productivity targets. Responsibilities of a Multiskilled Bodyshop Technician Carry out full vehicle repairs across panel, paint, and MET disciplines Perform strip & fit (mechanical, electrical, and trim) on a wide range of vehicles, including modern and EV models Complete panel repairs, dent removal, and structural work in line with manufacturer repair methods (MRMs) Prepare, mask, and refinish vehicles using water-based paint systems to achieve a high-quality finish Diagnose faults and ensure correct refit and functionality of all vehicle components Follow digital job cards and Bodyshop management systems (e.g. Audatex / Autoflow) Ensure all repairs meet BSI/PAS 10125 standards and health & safety requirements Carry out quality control checks to achieve "right first time" repairs Work collaboratively with the wider Bodyshop team to maintain efficient workflow and turnaround times Skills & Qualifications Proven experience as a Multiskilled Bodyshop Technician (Panel, Paint & MET) Strong knowledge of modern vehicle repair techniques, including strip & fit and refinishing Experience working with water-based paint systems and colour matching technology Confident with mechanical and electrical components, including basic diagnostics Ability to work efficiently in a fast-paced, high-volume Bodyshop High attention to detail with a commitment to delivering exceptional quality Recognised qualification (NVQ / IMI / City & Guilds or equivalent) ATA accreditation desirable but not essential Stable work history demonstrating reliability and consistency Full UK driving licence If you think you are a good fit for this Paint Sprayer role, please contact UK and state reference job number 53380. Don't worry if your CV is out of date - get in touch and we can work that out later. AutoSkills UK is a leading specialist in automotive recruitment, providing both temporary and permanent staffing solutions from skilled trades through to senior management. We are always looking to connect with experienced professionals across the Bodyshop sector, including: Paint Sprayers, Panel Beaters, MET Technicians / Strip Fitters, Vehicle Damage Assessors, Workshop Controllers, Bodyshop Quality Controllers and Bodyshop Managers
Jun 22, 2026
Full time
Multi Skilled Bodyshop Technician Multi Skilled Bodyshop Technician details: Basic Salary:£46,000 - £49,000 + Time Saved Bonus Working Hours:Monday - Friday (45 hours per week) Location:Aberdeen Central We are currently recruiting for a highly skilled Multiskilled Bodyshop Technician to join a busy, modern accident repair centre. This is an excellent opportunity for a technician proficient across Panel Beating, Paint Spraying, and MET (Mechanical, Electrical & Trim / Strip & Fit), looking to maximise earning potential in a high-performance environment. Working with the latest tools, equipment, and manufacturer repair methods, you will be responsible for completing end-to-end repairs to the highest quality standards while maintaining efficiency and productivity targets. Responsibilities of a Multiskilled Bodyshop Technician Carry out full vehicle repairs across panel, paint, and MET disciplines Perform strip & fit (mechanical, electrical, and trim) on a wide range of vehicles, including modern and EV models Complete panel repairs, dent removal, and structural work in line with manufacturer repair methods (MRMs) Prepare, mask, and refinish vehicles using water-based paint systems to achieve a high-quality finish Diagnose faults and ensure correct refit and functionality of all vehicle components Follow digital job cards and Bodyshop management systems (e.g. Audatex / Autoflow) Ensure all repairs meet BSI/PAS 10125 standards and health & safety requirements Carry out quality control checks to achieve "right first time" repairs Work collaboratively with the wider Bodyshop team to maintain efficient workflow and turnaround times Skills & Qualifications Proven experience as a Multiskilled Bodyshop Technician (Panel, Paint & MET) Strong knowledge of modern vehicle repair techniques, including strip & fit and refinishing Experience working with water-based paint systems and colour matching technology Confident with mechanical and electrical components, including basic diagnostics Ability to work efficiently in a fast-paced, high-volume Bodyshop High attention to detail with a commitment to delivering exceptional quality Recognised qualification (NVQ / IMI / City & Guilds or equivalent) ATA accreditation desirable but not essential Stable work history demonstrating reliability and consistency Full UK driving licence If you think you are a good fit for this Paint Sprayer role, please contact UK and state reference job number 53380. Don't worry if your CV is out of date - get in touch and we can work that out later. AutoSkills UK is a leading specialist in automotive recruitment, providing both temporary and permanent staffing solutions from skilled trades through to senior management. We are always looking to connect with experienced professionals across the Bodyshop sector, including: Paint Sprayers, Panel Beaters, MET Technicians / Strip Fitters, Vehicle Damage Assessors, Workshop Controllers, Bodyshop Quality Controllers and Bodyshop Managers
Plant Fitter Depot Location: Newton-Le-Willows Working Hours: 7.30am to 17.00pm Monday to Friday Contract Type: Full time / Permanent role Financial Package: £45000 to £47000 Per Annum + Overtime My client, a well-established Commercial Vehicle/Plant business is actively seeking to employ an Plant Fitter on a straight day shift. Key Responsibilities: Inspect and prepare equipment to the highest standards Diagnose faults and perform necessary repairs Adhere to Health & Safety regulations at all times Maintain, repair, and Service HGV vehicles Repair mechanical and electrical defects on all vehicles and related Complete all paperwork and documentation accurately Pre MOT checks and preparation Role requirements: Experience in HGV/LGV repairs Class 2 license (preferred but not essential) NVQ Level 2/3 in Light or Heavy Vehicles Strong problem-solving skills and a proactive attitude Excellent communication skills and ability to follow instructions Ability to work independently and manage workload efficiently Team player with a willingness to learn new skills To make an application for this exciting role, make an application via this advert or alternatively, email me directly at (url removed) or for further information call (phone number removed).
Jun 22, 2026
Full time
Plant Fitter Depot Location: Newton-Le-Willows Working Hours: 7.30am to 17.00pm Monday to Friday Contract Type: Full time / Permanent role Financial Package: £45000 to £47000 Per Annum + Overtime My client, a well-established Commercial Vehicle/Plant business is actively seeking to employ an Plant Fitter on a straight day shift. Key Responsibilities: Inspect and prepare equipment to the highest standards Diagnose faults and perform necessary repairs Adhere to Health & Safety regulations at all times Maintain, repair, and Service HGV vehicles Repair mechanical and electrical defects on all vehicles and related Complete all paperwork and documentation accurately Pre MOT checks and preparation Role requirements: Experience in HGV/LGV repairs Class 2 license (preferred but not essential) NVQ Level 2/3 in Light or Heavy Vehicles Strong problem-solving skills and a proactive attitude Excellent communication skills and ability to follow instructions Ability to work independently and manage workload efficiently Team player with a willingness to learn new skills To make an application for this exciting role, make an application via this advert or alternatively, email me directly at (url removed) or for further information call (phone number removed).
Are you a Mechanical Technician ? Are you able to read mechanical drawings or sketches ? Do you have previous assembly experience ?If so a global leader of special purpose vehicles is looking to expand their shopfloor and take on board a new Mechanical technician! Mechanical Technician Permanent Position x4 Mon-Thurs (8.30am to 4.30pm) and Friday (8.30am to 4pm) Flexi-time available Kirkbymoorside Mechanical Technician Job Description: Reading engineering drawings/assembly instructions and building mechanical sub assemblies Using hand and power tools to assemble parts/systems Mechanical assembly of products such as: structural components, pumps, motors, manifolds, valves, manipulators and specialist equipment Performing testing of assembled products Reading and working from mechanical sketches and engineering drawings. Mechanical Technician Essential Experience/Skills/Qualifications: Must be able to read mechanical engineering drawings Previous assembly experience If you feel you're a good fit for this position, please click 'apply'
Jun 22, 2026
Full time
Are you a Mechanical Technician ? Are you able to read mechanical drawings or sketches ? Do you have previous assembly experience ?If so a global leader of special purpose vehicles is looking to expand their shopfloor and take on board a new Mechanical technician! Mechanical Technician Permanent Position x4 Mon-Thurs (8.30am to 4.30pm) and Friday (8.30am to 4pm) Flexi-time available Kirkbymoorside Mechanical Technician Job Description: Reading engineering drawings/assembly instructions and building mechanical sub assemblies Using hand and power tools to assemble parts/systems Mechanical assembly of products such as: structural components, pumps, motors, manifolds, valves, manipulators and specialist equipment Performing testing of assembled products Reading and working from mechanical sketches and engineering drawings. Mechanical Technician Essential Experience/Skills/Qualifications: Must be able to read mechanical engineering drawings Previous assembly experience If you feel you're a good fit for this position, please click 'apply'
All your technical production skills will be used here; mechanical, pipe fitting, electrical connections and reading assembly drawings for a company who make large bespoke barriers and gates. Everything they do is different for each customer so this is interesting and a long way from a boring and repeatitive assembly job You ll be working from detailed assembly diagrams, putting together large prefabricated metal components, hydraulic hoses, attaching electric motors & pumps, connecting cable assemblies and undertaking basic test checks. I d like to see a Mechanical Apprenticeship or trained background in engineering manufacturing and work experience in a heavy duty assembly environment A counterbalance forklift licence and welding skills will be a huge plus but not essential This company is really busy with lots of overtime and promotional propects to their field service team CV not ready? No problem, just email, Inmail, text ot call me I ll always get back to you
Jun 22, 2026
Full time
All your technical production skills will be used here; mechanical, pipe fitting, electrical connections and reading assembly drawings for a company who make large bespoke barriers and gates. Everything they do is different for each customer so this is interesting and a long way from a boring and repeatitive assembly job You ll be working from detailed assembly diagrams, putting together large prefabricated metal components, hydraulic hoses, attaching electric motors & pumps, connecting cable assemblies and undertaking basic test checks. I d like to see a Mechanical Apprenticeship or trained background in engineering manufacturing and work experience in a heavy duty assembly environment A counterbalance forklift licence and welding skills will be a huge plus but not essential This company is really busy with lots of overtime and promotional propects to their field service team CV not ready? No problem, just email, Inmail, text ot call me I ll always get back to you
Job Title: Mechanical Fitter Location: Bassingbourn Pay Rate: £16.25 £17.33 per hour (DOE) or £21.68 - £23.12 per hour Umbrella Contract Role Overview of the Mechanical Fitter We are currently recruiting for an experienced Mechanical Fitter to join a busy and growing team based in Bassingbourn on a contract basis. Key Responsibilities Mechanical assembly and build of products and systems Working from engineering drawings and technical instructions Fitting components, sub-assemblies, and final assemblies Supporting basic electrical wiring tasks where needed Conducting build checks to ensure quality and accuracy Maintaining high standards of health and safety Requirements Previous experience as a Mechanical Fitter or Assembly Technician Strong ability to read and interpret engineering drawings Experience in mechanical build/assembly Ideally some basic wiring knowledge (desirable but not essential) Good attention to detail and quality If you would like to know more about this role, please get in touch with Alessandra at Orion Electrotech Due to the volume of applications, if you do not hear back within 5 working days, please assume your application has been unsuccessful. Check our website for more opportunities. INDMAN
Jun 22, 2026
Full time
Job Title: Mechanical Fitter Location: Bassingbourn Pay Rate: £16.25 £17.33 per hour (DOE) or £21.68 - £23.12 per hour Umbrella Contract Role Overview of the Mechanical Fitter We are currently recruiting for an experienced Mechanical Fitter to join a busy and growing team based in Bassingbourn on a contract basis. Key Responsibilities Mechanical assembly and build of products and systems Working from engineering drawings and technical instructions Fitting components, sub-assemblies, and final assemblies Supporting basic electrical wiring tasks where needed Conducting build checks to ensure quality and accuracy Maintaining high standards of health and safety Requirements Previous experience as a Mechanical Fitter or Assembly Technician Strong ability to read and interpret engineering drawings Experience in mechanical build/assembly Ideally some basic wiring knowledge (desirable but not essential) Good attention to detail and quality If you would like to know more about this role, please get in touch with Alessandra at Orion Electrotech Due to the volume of applications, if you do not hear back within 5 working days, please assume your application has been unsuccessful. Check our website for more opportunities. INDMAN
Fabricator 36,000 - 42,000 + Training + Early Friday Finish + Overtime Monday - Thursday, 07:00 - 16:00, Friday, 07:00 - 13:00 Bridgend Do you have Fabrication/Welding experience within a production, engineering or marine environment? Have you been coded and want to regain this certificate? Are you looking to gain access to further training & development to enhance your skillset? Do you want to join a leading manufacturing group offering excellent work/life balance with a Monday-Friday early working pattern? Due to continued growth, my client is looking for a Fabricator to join the team working out of their state of the art facility near Bridgend. The successful applicant will be working on large, bespoke equipment to service a range of customers within the energy, healthcare and marine sectors. You will gain exposure to other fabrication and welding tasks enabling you to enhance your skillset and gain further experience & qualifications. This is a vital role within an expanding production team, giving you access to overtime, development and other welding techniques. This is a great time to join the business who are one of the leading companies within their sector with 2 expanding sites in the UK! With weekends off and other hours available this is a great opportunity for someone looking to increase their earnings and improve their work/life balance within a long term challenge. For more information please click apply and contact Patrick Walsh - Reference 5144 - (phone number removed) The Role: TIG & MIG Welding - Trained on MIG Access to other fabrication work Monday - Friday, days The Candidate: TIG Welding Experience Has been coded A commutable distance to Bridgend elix Sourcing Solutions is a specialist recruiter for Engineering, IT and Science roles ranging from mid to senior level positions. Please be aware that we will only accept applications from candidates that have a valid work permit to work in the UK. By applying to this job, you are confirming that you do not hold a criminal record and that you know of no legal reason why you would be ineligible for employment. MIG TIG Welding Fabricator Fabrication Training Fitter Mechanical Production Manufacturing Manufacture Manufacturer Manufactured Engineer Engineering Bridgend Wales South Wales Neath Port Talbot Swansea Porthcawl Pencoed Cardiff INDMP
Jun 22, 2026
Full time
Fabricator 36,000 - 42,000 + Training + Early Friday Finish + Overtime Monday - Thursday, 07:00 - 16:00, Friday, 07:00 - 13:00 Bridgend Do you have Fabrication/Welding experience within a production, engineering or marine environment? Have you been coded and want to regain this certificate? Are you looking to gain access to further training & development to enhance your skillset? Do you want to join a leading manufacturing group offering excellent work/life balance with a Monday-Friday early working pattern? Due to continued growth, my client is looking for a Fabricator to join the team working out of their state of the art facility near Bridgend. The successful applicant will be working on large, bespoke equipment to service a range of customers within the energy, healthcare and marine sectors. You will gain exposure to other fabrication and welding tasks enabling you to enhance your skillset and gain further experience & qualifications. This is a vital role within an expanding production team, giving you access to overtime, development and other welding techniques. This is a great time to join the business who are one of the leading companies within their sector with 2 expanding sites in the UK! With weekends off and other hours available this is a great opportunity for someone looking to increase their earnings and improve their work/life balance within a long term challenge. For more information please click apply and contact Patrick Walsh - Reference 5144 - (phone number removed) The Role: TIG & MIG Welding - Trained on MIG Access to other fabrication work Monday - Friday, days The Candidate: TIG Welding Experience Has been coded A commutable distance to Bridgend elix Sourcing Solutions is a specialist recruiter for Engineering, IT and Science roles ranging from mid to senior level positions. Please be aware that we will only accept applications from candidates that have a valid work permit to work in the UK. By applying to this job, you are confirming that you do not hold a criminal record and that you know of no legal reason why you would be ineligible for employment. MIG TIG Welding Fabricator Fabrication Training Fitter Mechanical Production Manufacturing Manufacture Manufacturer Manufactured Engineer Engineering Bridgend Wales South Wales Neath Port Talbot Swansea Porthcawl Pencoed Cardiff INDMP
TIG Welder 33,000 - 38,000 + Training + Early Friday Finish Monday - Thursday, Early Or Late Shift Available. 40 Hours Per Week Didcot - Commutable from Abingdon, Oxford, Wantage & Colsey Do you have TIG Welding experience within a production, engineering or marine environment? Are you looking to gain access to further training & development to enhance your skillset? Do you want to join a leading manufacturing group offering excellent work/life balance with a Monday-Friday working pattern? Due to continued growth, my client is looking for a welder to join the team working out of their state of the art facility near Didcot. The successful applicant will be working on large, bespoke equipment to service a range of customers within the energy, healthcare and marine sectors. You will gain exposure to other production & machining related tasks enabling you to enhance your skillset and gain further experience & qualifications. This is a vital role within an expanding production team, giving you access to overtime, development and other welding techniques. This is a great time to join the business who are one of the leading companies within their sector with 2 expanding sites in the UK! With weekends off and other hours available this is a great opportunity for someone looking to increase their earnings and improve their work/life balance within a long term challenge. For more information please click apply and contact Patrick Walsh - Reference 4697 - (phone number removed) The Role: TIG & MIG Welding - Trained on MIG Access to other production & machining work Monday - Friday, earlies The Candidate: TIG Welding Experience An interest in learning new skills A commutable distance to Didcot elix Sourcing Solutions is a specialist recruiter for Engineering, IT and Science roles ranging from mid to senior level positions. Please be aware that we will only accept applications from candidates that have a valid work permit to work in the UK. By applying to this job, you are confirming that you do not hold a criminal record and that you know of no legal reason why you would be ineligible for employment. MIG TIG Welding Fabricator Fabrication Training Fitter Mechanical Production Manufacturing Manufacture Manufacturer Manufactured Engineer Engineering Didcot Oxford Oxfordshire Abingdon Colsey Reading Newbury Swindon MIG Welder 16.50 - 17.50 Per Hour + Training + Overtime + Early Friday Finish Monday - Thursday, 08:00 - 16:30. Friday, 08:00 - 15:15 Near Pocklington - Commutable From: Melbourne, Market Weighton, Seaton Ross & York Do you have MIG welding or fabrication experience? Are you looking for an exciting new role within a leading special purpose machinery manufacturing employer? Do you want the chance to enhance your skillset, gain industry specific training and increase your earnings through overtime? Due to continued growth, my client is looking for fabricators to join the team at their state of the art facility near Pocklington. The successful applicant will be working on a range of special purpose machinery that is sent to customers across the UK, Europe and the rest of the world. You will gain excellent product and industry training and will have the opportunity to further develop your MIG & TIG welding skills. You will be working to a range of engineering drawings and will be working with mild and stainless steel. This is an excellent opportunity to join an industry leading manufacturer who have been at the forefront of their industry for over 30 years! With an excellent staff retention rate and first class training on offer, this is a great time to join a business specialising in the design, build and transport of valuable special purpose machinery. For more information please click apply and contact Patrick Walsh - REF 4960 - (phone number removed) The Role: Mig & Tig Welding Working with mild and stainless steel Fitting a range of special purpose machinery The Candidate: MIG Welding experience Has worked with steel A commutable distance to Pocklington Consultant: Patrick Walsh elix Sourcing Solutions is a specialist recruiter for Engineering, IT and Science roles ranging from mid to senior level positions. Please be aware that we will only accept applications from candidates that have a valid work permit to work in the UK. By applying to this job you are confirming that you do not hold a criminal record and that you know of no legal reason why you would be ineligible for employment. Welder Fabricator Welding TIG MIG ARC STICK MMA Fitter Mechanical Technician Engineer Manufacturing Manufacturer Manufactured York Yorkshire Pocklington Melbourne Market Weighton Shipton Thorpe INDMP
Jun 22, 2026
Full time
TIG Welder 33,000 - 38,000 + Training + Early Friday Finish Monday - Thursday, Early Or Late Shift Available. 40 Hours Per Week Didcot - Commutable from Abingdon, Oxford, Wantage & Colsey Do you have TIG Welding experience within a production, engineering or marine environment? Are you looking to gain access to further training & development to enhance your skillset? Do you want to join a leading manufacturing group offering excellent work/life balance with a Monday-Friday working pattern? Due to continued growth, my client is looking for a welder to join the team working out of their state of the art facility near Didcot. The successful applicant will be working on large, bespoke equipment to service a range of customers within the energy, healthcare and marine sectors. You will gain exposure to other production & machining related tasks enabling you to enhance your skillset and gain further experience & qualifications. This is a vital role within an expanding production team, giving you access to overtime, development and other welding techniques. This is a great time to join the business who are one of the leading companies within their sector with 2 expanding sites in the UK! With weekends off and other hours available this is a great opportunity for someone looking to increase their earnings and improve their work/life balance within a long term challenge. For more information please click apply and contact Patrick Walsh - Reference 4697 - (phone number removed) The Role: TIG & MIG Welding - Trained on MIG Access to other production & machining work Monday - Friday, earlies The Candidate: TIG Welding Experience An interest in learning new skills A commutable distance to Didcot elix Sourcing Solutions is a specialist recruiter for Engineering, IT and Science roles ranging from mid to senior level positions. Please be aware that we will only accept applications from candidates that have a valid work permit to work in the UK. By applying to this job, you are confirming that you do not hold a criminal record and that you know of no legal reason why you would be ineligible for employment. MIG TIG Welding Fabricator Fabrication Training Fitter Mechanical Production Manufacturing Manufacture Manufacturer Manufactured Engineer Engineering Didcot Oxford Oxfordshire Abingdon Colsey Reading Newbury Swindon MIG Welder 16.50 - 17.50 Per Hour + Training + Overtime + Early Friday Finish Monday - Thursday, 08:00 - 16:30. Friday, 08:00 - 15:15 Near Pocklington - Commutable From: Melbourne, Market Weighton, Seaton Ross & York Do you have MIG welding or fabrication experience? Are you looking for an exciting new role within a leading special purpose machinery manufacturing employer? Do you want the chance to enhance your skillset, gain industry specific training and increase your earnings through overtime? Due to continued growth, my client is looking for fabricators to join the team at their state of the art facility near Pocklington. The successful applicant will be working on a range of special purpose machinery that is sent to customers across the UK, Europe and the rest of the world. You will gain excellent product and industry training and will have the opportunity to further develop your MIG & TIG welding skills. You will be working to a range of engineering drawings and will be working with mild and stainless steel. This is an excellent opportunity to join an industry leading manufacturer who have been at the forefront of their industry for over 30 years! With an excellent staff retention rate and first class training on offer, this is a great time to join a business specialising in the design, build and transport of valuable special purpose machinery. For more information please click apply and contact Patrick Walsh - REF 4960 - (phone number removed) The Role: Mig & Tig Welding Working with mild and stainless steel Fitting a range of special purpose machinery The Candidate: MIG Welding experience Has worked with steel A commutable distance to Pocklington Consultant: Patrick Walsh elix Sourcing Solutions is a specialist recruiter for Engineering, IT and Science roles ranging from mid to senior level positions. Please be aware that we will only accept applications from candidates that have a valid work permit to work in the UK. By applying to this job you are confirming that you do not hold a criminal record and that you know of no legal reason why you would be ineligible for employment. Welder Fabricator Welding TIG MIG ARC STICK MMA Fitter Mechanical Technician Engineer Manufacturing Manufacturer Manufactured York Yorkshire Pocklington Melbourne Market Weighton Shipton Thorpe INDMP
CP30633 HGV Fitter 40k- 45k Warrington Alecto Recruitment is working with a well-established and reputable supplier of suction excavators. Due to continued growth, they are looking to add an experienced HGV Technician to their workshop team. This represents an exciting opportunity to join a stable and successful business that values its employees and offers long-term career prospects. With a supportive working environment, ongoing development opportunities and regular overtime available, this is an excellent role for an experienced HGV professional. A great stand-out in this role is the work-life balance on offer, combined with excellent overtime opportunities and a friendly team environment. You'll be joining a business that genuinely invests in its staff and provides the support needed to develop your skills and progress your career. Salary & Benefits 40,000 - 45,000 Basic Salary (Dependent on Experience) Overtime Available Throughout the Week and Weekends Workplace Pension Scheme Employee Assistance Programme Ongoing Training & Development Stable, Permanent Position Supportive Team Environment Long-Term Career Progression Opportunities Working Hours Monday to Friday: 7:30am - 5:00pm Saturday: 7:30am - 1:00pm The Role Carry out servicing, maintenance and repairs on HGV and LGV vehicles. Diagnose and rectify mechanical and electrical faults. Complete pre-MOT inspections and vehicle preparation. Ensure all repairs are completed to a high standard and within required timescales. Complete all service records, inspection sheets and workshop documentation accurately. Maintain compliance with all Health & Safety regulations and company procedures. Requirements Previous experience as an HGV Technician, HGV Fitter or LGV Technician. NVQ Level 2 or Level 3 in Light Vehicle Maintenance, Heavy Vehicle Maintenance or equivalent qualification. Strong diagnostic and fault-finding skills. Experience carrying out mechanical and electrical repairs. Ability to work independently and effectively manage workloads. Strong communication skills and a proactive approach to problem-solving. Desirable Class 2 (Category C) Driving Licence. Experience within commercial vehicle workshops or fleet maintenance environments. If you're an experienced HGV Technician looking for a secure and rewarding position with a growing business, we want to hear from you. Send your CV to: (url removed) or call (phone number removed) for a confidential chat. INDHP HGV Technician, HGV Fitter, LGV Technician, LGV Mechanic, HGV Mechanic, Commercial Vehicle Technician, Fleet Technician, Heavy Vehicle Technician, Workshop Technician, Vehicle Mechanic, Diesel Mechanic, MOT Preparation, Fleet Maintenance, Mechanical Engineer, Electrical Diagnostics, Transport Maintenance, Great Sankey, Warrington.
Jun 22, 2026
Full time
CP30633 HGV Fitter 40k- 45k Warrington Alecto Recruitment is working with a well-established and reputable supplier of suction excavators. Due to continued growth, they are looking to add an experienced HGV Technician to their workshop team. This represents an exciting opportunity to join a stable and successful business that values its employees and offers long-term career prospects. With a supportive working environment, ongoing development opportunities and regular overtime available, this is an excellent role for an experienced HGV professional. A great stand-out in this role is the work-life balance on offer, combined with excellent overtime opportunities and a friendly team environment. You'll be joining a business that genuinely invests in its staff and provides the support needed to develop your skills and progress your career. Salary & Benefits 40,000 - 45,000 Basic Salary (Dependent on Experience) Overtime Available Throughout the Week and Weekends Workplace Pension Scheme Employee Assistance Programme Ongoing Training & Development Stable, Permanent Position Supportive Team Environment Long-Term Career Progression Opportunities Working Hours Monday to Friday: 7:30am - 5:00pm Saturday: 7:30am - 1:00pm The Role Carry out servicing, maintenance and repairs on HGV and LGV vehicles. Diagnose and rectify mechanical and electrical faults. Complete pre-MOT inspections and vehicle preparation. Ensure all repairs are completed to a high standard and within required timescales. Complete all service records, inspection sheets and workshop documentation accurately. Maintain compliance with all Health & Safety regulations and company procedures. Requirements Previous experience as an HGV Technician, HGV Fitter or LGV Technician. NVQ Level 2 or Level 3 in Light Vehicle Maintenance, Heavy Vehicle Maintenance or equivalent qualification. Strong diagnostic and fault-finding skills. Experience carrying out mechanical and electrical repairs. Ability to work independently and effectively manage workloads. Strong communication skills and a proactive approach to problem-solving. Desirable Class 2 (Category C) Driving Licence. Experience within commercial vehicle workshops or fleet maintenance environments. If you're an experienced HGV Technician looking for a secure and rewarding position with a growing business, we want to hear from you. Send your CV to: (url removed) or call (phone number removed) for a confidential chat. INDHP HGV Technician, HGV Fitter, LGV Technician, LGV Mechanic, HGV Mechanic, Commercial Vehicle Technician, Fleet Technician, Heavy Vehicle Technician, Workshop Technician, Vehicle Mechanic, Diesel Mechanic, MOT Preparation, Fleet Maintenance, Mechanical Engineer, Electrical Diagnostics, Transport Maintenance, Great Sankey, Warrington.
