200 jobs found

Server Build Engineer (Maritime) Onsite in Warrington (UK and occasional international travel required) 40,000 - 45,000 per annum Must be eligible and willing to undergo high-level security clearance We are seeking an experienced and adaptable Server Build Engineer to join a specialist maritime delivery team supporting the deployment of complex IT and communications systems within defence and secure environments. This is a hands-on technical role involving the build, configuration, installation, and support of hardware and software solutions both in controlled factory settings and onboard naval vessels. The successful candidate will work on challenging projects with demanding deadlines, where flexibility and the ability to operate outside standard working hours are essential. You will play a key role in delivering and supporting secure infrastructure solutions from initial factory builds through to installation, commissioning, data migration, and transition into live service. Key Responsibilities Build, configure, and test server and network hardware in a secure factory environment. Install and commission IT equipment onboard maritime platforms and at defence sites. Perform hardware removals, installations, Factory Acceptance Testing (FAT), and Harbour Acceptance Testing (HAT). Build and configure software images, virtual machines, and application environments. Apply patches, hotfixes, and software updates to maintain operational readiness. Support data migration, third-party application integration, and communications connectivity. Conduct assurance and commissioning activities to ensure systems meet customer requirements. Participate in customer handovers and provide onsite engineering support during service transition. Produce daily progress reports when acting as Vessel Lead. Maintain and update technical knowledge bases to support information sharing and troubleshooting. Escalate technical, security, and health and safety issues where appropriate. Ensure compliance with security procedures for classified equipment and protectively marked data. Identify additional training needs to support evolving technologies and project requirements. Technical Skills and Experience Essential Skills Strong experience in server build, hardware configuration, and systems integration. Working knowledge of: Cisco Systems networking equipment Riverbed Technology optimisation products Hewlett Packard Enterprise hardware Dell Technologies servers and storage APC by Schneider Electric UPS systems Panasonic Corporation rugged devices Xerox printers Epson printers OKI Electric Industry printers Strong knowledge of: Microsoft Windows Server and enterprise platforms VMware virtualisation technologies Experience with operating in secure and classified environments. Ability to troubleshoot hardware, software, and connectivity issues under pressure. Excellent communication and customer-facing skills. Strong documentation and reporting capabilities. Desirable Skills Experience in maritime, naval, or defence environments. Marine electrical background, including electrical power distribution. Understanding of engineering standards relevant to defence platforms. Knowledge of multi-level secure systems and bulk data handling. Familiarity with Health & Safety regulations, including COSHH. If you are interested in discussing this Server Build Engineer role, apply now or send your CV to me at (url removed)

Robotics Software Engineer (Flight Software) Up to 55,000 (flexible depending on experience) Excellent Benefits Package London / Oxfordshire, UK Hybrid ( 2 days a week from home) Permanent We are looking for a talented Robotics Software Engineer (Flight Software) to join a fast-growing AI and robotics safety startup. The business is continuing to expand its engineering capability as it develops cutting-edge software assurance systems for autonomous and robotics applications. The company is building advanced safety and assurance technology designed to ensure autonomous systems operate safely, predictably, and with optimal performance. Their solutions focus on robotics and AI environments where reliability, safety, and system assurance are critical. This is a fantastic opportunity to work on software that directly powers autonomous robotic systems. You will contribute to the design, development, integration, testing, and optimisation of robotics software components across perception, planning, control, and decision-making systems. We are looking for someone who enjoys working in a startup environment and is motivated by solving complex technical challenges. This role offers the opportunity to work on groundbreaking robotics and AI safety technology while helping shape products from an early stage. Key Responsibilities: Design, build, and integrate robotics software components within the wider product platform Develop algorithms across perception, planning, control, and decision-making Collaborate with embedded software engineers, systems architects, and AI/ML specialists to integrate components into the wider system Assist with testing, validation, optimisation, and reliability improvements Contribute to improving software development processes, tooling, and testing methodologies Stay up to date with the latest robotics software frameworks, tools, and algorithmic developments Key Skills Bachelor's or Master's degree in Computer Science, Aerospace, Robotics, Electrical Engineering, or a related discipline Practical experience in robotics, embedded systems, or autonomous systems Strong proficiency in C/C++ and/or Python Experience with robotics frameworks/tools such as ROS, Gazebo, or MoveIt Strong understanding of robotics concepts including perception, planning, control, and state estimation Experience with modern software development practices including version control, CI, and testing Strong analytical, debugging, and problem-solving skills Ability to work effectively within a multidisciplinary engineering team Must have or be eligible to obtain UK SC clearance Desirable Skills: Knowledge of safety-critical standards such as DO-178C, ISO 26262, or IEC 61508 Experience with simulation environments Experience with robotic hardware integration Aerospace, UAV, defence, or autonomous vehicle experience Startup or scale-up engineering experience What you get in return: Salary up to 55,000 Hybrid working with 2 days a week from home Company pension Cycle to work scheme Work from home flexibility Opportunity to work on industry-leading AI and robotics safety technology The chance to make a real impact on the future of autonomous system assurance This company is an equal opportunity employer and values diversity. They do not discriminate on the basis of race, religion, colour, national origin, gender, sexual orientation, age, marital status, veteran status, or disability status. Interested? Please submit your CV via the link provided. Alternatively, for a confidential discussion about the role, please get in touch directly with (url removed) INDTECH DCS Recruitment and all associated companies are committed to creating a working environment where diversity is celebrated and everyone is treated fairly, regardless of gender, gender identity, disability, ethnic origin, religion or belief, sexual orientation, marital or transgender status, age, or nationality

Principal Test Equipment Engineer 100% on site in Edinburgh The opportunity: Are you interested in developing test equipment for some of the most cutting-edge defence and aerospace projects in the UK? If you like the sound of developing test equipment for projects such as the SAAB Gripen jet, then Leonardo would like to hear from you. We are looking for an experienced Principal Test Equipment Engineer to join the development team on a complex Automatic Test Equipment system within Product & MRO Services of the Customer Support Services Solutions (CS3) at our Edinburgh based site. You will be required to work within a multi-disciplined engineering team in the delivery of technical solutions for the project. The successful candidate will be involved in a wide variety of engineering activities including, but not limited to, involvement with the design and development of solutions for Automatic Test Equipment systems, integration testing, qualification, certification and customer acceptance. This will involve liaison with internal/external customers, other functions within the Integrated Project Team (IPT) and engineering sub-contractors. What you'll do as a Principal Test Equipment Engineer: Key contributor to the creation and delivery of the technical solution within a defined work package area, ensuring that it meets all stakeholder requirements Development and deployment of test programs Hardware and software integration of test programs Design of systems, interfaces and cable assemblies Work closely with internal IPT Functions, support to Production and liaison with external customers stakeholders Ensure the application of appropriate tools / techniques for test equipment design by the team, providing advice in own area of expertise Resolve emerging issues by proposing and driving through solutions, escalating more complex risks and supporting definition of opportunities and risk mitigation options Foster relationships and networks within and outside the line of business, actively seeking out opportunities and promoting a culture for adoption of best practice Develop, coach, mentor, teach, and upskill other engineers in the wider application of engineering. What we need from you: Demonstrated experience of technical solution development within a multi-disciplinary team Integration experience using software languages such as CVI, C, C++ Integration experience in a NI Test Stand environment LF/Digital and / or RF/uW hardware integration experience Offsite / Overseas test integration experience Hands on experience of hardware full design process and lifecycle. Knowledge of Product safety legislation Experience in capturing and analysing stakeholder needs to help guide the development of solutions capable of meeting the needs of future operational environments Strong interpersonal and collaboration skills, with an ability to influence and adapt according to changing demands. Experience of working collaboratively with internal and external stakeholders from a wide range of organisations, disciplines, backgrounds and levels of seniority, including managing relationships with customers and/or suppliers. Ability to maintain engineering best practice, including looking externally to sources such as academia or other industries Demonstrated ability to coach and develop others Self-motivated with an aptitude for problem solving and driving difficult issues to conclusion Intrinsic Factors: This is an Edinburgh factory based role using ATE systems however the successful candidate may also have to visit customers in other parts of the UK and abroad. The successful candidate will be expected to work full time hours and shift patterns in a flexible and demanding environment. The nature of the Engineering projects means that any candidate being considered for the position must: - Have Secret security clearance - Have a minimum of 5 years permanent residency in the UK - Have the clearance to see caveated information such as UK eyes only and ITAR INDWIN Our clients and their customers come from diverse backgrounds and so do we. We hire our people from various walks of life, each of whom make our company stronger with their talent, uniqueness, and expertise. This is what makes our company special; if you want to help us grow and take this ethos to our clients, then we cannot wait to collaborate with you! The UK has now left the European Union. Any EU, EEA or Swiss citizens living in the UK that wish to remain in the UK post Brexit need to apply to the EU Settlement Scheme. Although the closing date for applications was 30th Jun 2021, if you have not yet applied but believe that you would qualify under the EU Settlement Scheme, the Home Office have confirmed that they will consider late applications. For further information please see (url removed)> Many Thanks

Power Systems Engineer Space / Aerospace Guildford Hybrid An exciting opportunity to make a difference within the industry delivering highly innovative power solutions for spacecraft missions. This role involves responsibility for undertaking the design, analysis, development, verification and delivery of power system and energy conversion solutions into different missions, including power subsystem lead responsibility for those missions. This key role will often sit within the core team of a satellite mission interacting with other technical leads across multiple disciplines to generate the technical solutions for innovative projects. Key Tasks Primary role will be the Power System Engineer in Space Projects, working in a team supporting Senior Power System Engineers to deliver flight modules to spacecraft and support their integration and testing at spacecraft level. Typical duties include: Managing and updating module documentation including procedures, reports, interface documents and drawings Ensuring that module test equipment is operating normally Fault-finding on flight modules as necessary Overseeing of the testing of flight modules Preparing reviews of all test documentation Reviewing module build documentation Configuration and updating of ATE to suit the requirements of current modules Delivery of tested flight modules to the spacecraft Assembly, Integration and Test team on time In conjunction with Senior Engineers carrying out qualification testing on new and revised module designs Support to product development and new designs for future missions. Providing support for spacecraft-level Thermal-Vacuum testing Previous Experience At least 1 year proven Power System Engineering experience in a systems / power electronics role, ideally in the Space or Aerospace Industries though equivalent experience with complex electronic systems will be considered In-depth understanding of analogue and power electronics testing and fault-finding Familiarity with typical Power System Equipment in a spacecraft including: Battery Charge/Discharge Regulators, Power Distribution Modules, Relay/Activation Modules, Drive Electronics for motors/mechanism, DC-DC converters (range from 5W-3kW), Heater Control Boards, Batteries and Solar Panels Hands-on experience in fault-finding during development of power electronics/analogue products Good presentation and discussion skills of technical material to/with a technical audience Recent experience with schematic capture and simulation software (e.g. MentorGraphics, OrCAD PSPICE, etc.) Recent experience with scripting languages such as Python, ideally in a hardware/ATE control environment. Recent experience with the use of standard test equipment including oscilloscopes, power supplies, load units and meters. Qualifications Knowledge & Skills BTEC / Degree in Electronics or equivalent Very good understanding of analogue and power electronics Familiarity with microprocessor and FPGA interfacing Good knowledge of electronic components Familiarity with the use of test equipment in power environments and to be able to use it to produce accurate measurements in electrically noisy environments Familiarity of the use of scripting languages to control test sequencing Benefits Highly competitive Salary dependent on experience Flexible working policies 32 days annual leave + BH Annual Company Bonus Scheme Up to 8% employer pension contribution Life Assurance (6X salary) Private Health Care Enhanced Maternity & Paternity leave Multiple Discount, Memberships schemes

Job Title: Firmware Engineer Location: Bristol (Hybrid 3 days on-site per week) Salary: Up to £60,000 + Bonus & Benefits (dependent on experience) Overview : An exciting opportunity has arisen for a Firmware Engineer to join an engineering team of 40+ who are going to be developing the next generation of product, which will be deployed across the globe. In this role, you will contribute to the design and development of high-performance embedded software and firmware for next-generation products, while also maintaining and enhancing existing systems. Key Responsibilities Design, develop, and maintain firmware in C Support new product development and continuous improvement of existing solutions Collaborate closely with multidisciplinary engineering teams Debug and troubleshoot embedded hardware and software issues Skills & Experience Required Minimum of 3 years experience working with embedded systems Strong proficiency in Embedded C for bare-metal firmware development Experience with communication interfaces and protocols such as SPI, RS-485, and CAN Hands-on debugging experience using oscilloscopes, logic analysers, and multimeters Familiarity with source control systems such as Git Benefits Package Competitive pension scheme (up to 7% employer match) Discretionary annual bonus (typically around 10%) 25 days annual leave plus 8 bank holidays Private medical healthcare Hybrid working and flexitime Annual wellness checks 25% discount on gym memberships Retail vouchers Mental health support services Regular social activities If you re interested in learning more about this opportunity, please apply with your latest CV. Visa Sponsorship not available for this role

Management Accountant Role Permanent Tamworth £45K + Your new company HAYS are excited to represent a global technology business that develops advanced hardware and software solutions to improve measurement accuracy and operational efficiency across industries such as construction, engineering, and land surveying. The organisation specialises in integrating positioning technologies, sensors, and data-driven platforms to help businesses optimise workflows, reduce errors, and enhance productivity across field-based and project environments. Your new role Who are now seeking a hands-on and commercially minded Management Accountant to support the finance function within a fast-paced, technology-driven environment.This is a true end-to-end, all-rounder role, covering the full finance lifecycle, from transactional finance activities (such as purchasing and accounts processing) through to the preparation and finalisation of monthly management accounts.The role is ideal for someone who enjoys working in both operational and strategic finance, and who is comfortable rolling up their sleeves while also providing meaningful financial insight to support business decision-making.This role offers future progression opportunities into a leadership position. Therefore, if you enjoy managing people, this role could be a fantastic opportunity for you. What you'll need to succeed Qualified accountant or QBE Previous experience in a Management Accountant or similar finance role Strong technical accounting knowledge and month-end close experience Excellent Excel and financial systems skills Strong analytical skills with the ability to interpret data and communicate clear insights High attention to detail with strong organisational skills What you'll get in return Flexible hybrid working Private Healthcare Death in service 25 days annual leave 5% Pension contribution Flexible Hybrid working What you need to do now If you're interested in this role, click 'apply now' to forward an up-to-date copy of your CV, or call us now. If this job isn't quite right for you, but you are looking for a new position, please contact us for a confidential discussion about your career.

Specialist Field Engineer - EPoS & IT Field Services Field-Based Role UK Travel Required Take your engineering career to the next level If you are an experienced EPoS Field Engineer looking for more than just standard break-fix work, this is your opportunity to step into a high-impact, multi-skilled Specialist Field Engineer role. At Barron McCann, you will not just fix issues. You will play a critical role in keeping major retail and hospitality operations running, while also delivering next-generation technology deployments for some of the UK's most recognised brands. Why this role stands out This role combines high-level fault resolution, project delivery, technical leadership, and exposure to EPoS, networking, WiFi, and infrastructure technologies. You will be trusted as a go-to technical expert in the field, someone who can solve, install, improve, and influence. Your impact As a Specialist Field Engineer, you will respond to critical break-fix scenarios, diagnosing and resolving hardware, software, and network issues quickly to minimise downtime. You will also deliver installation and deployment projects, ensuring systems are configured, tested, and integrated into live environments. What you will be doing Handling escalated technical calls and complex fault scenarios Installing and configuring EPoS, IT hardware, networking, and WiFi solutions Performing site surveys for installations and upgrades Carrying out planned maintenance and proactive service visits Diagnosing faults to component level or replacing full units where required Supporting project work independently or within a team Coaching and mentoring other engineers Working closely with planning and project teams What we are looking for Experience as a field-based EPoS or IT Engineer Knowledge of hardware, peripherals, and IP networking Experience in installations and break-fix environments Strong troubleshooting and problem-solving skills Clear communication skills A proactive and adaptable approach with strong organisational skills What you can expect A varied role with ownership and autonomy Opportunities to develop skills across new technologies A step up into a more senior, solutions-focused role Ongoing training and exposure to new systems A supportive environment where your expertise is valued Things to know This is a field-based role with extensive travel Out of hours work, overnight stays, and night work may be required A full UK driving licence is essential If you are an experienced field engineer looking to broaden your skillset, take on more technical responsibility, and play a key role in both support and deployment, we would love to hear from you.

Senior Applications Engineer / Hybrid, Lancaster / Full Time / £60,000 to £70,000 Quantum Base is a pioneering deep-tech spin-out from Lancaster University, and we have invented Q-ID a world-leading, anti-counterfeit technology solution for brand protection and security printing. Q-IDs cannot be counterfeited or photocopied, can be applied to virtually any physical product, and can be instantly authenticated using any standard smartphone. With 11 years of deep R&D backing us, our mission is to create a new global standard in security. Our largest client is a prestigious security printer utilizing Q-IDs for a major government tax stamp programme. The Senior Applications Engineer Role: As our first external hire into the Customer Implementation Function , this is a unique opportunity to take true ownership and shape how we scale. We are seeking a senior, hands-on engineer to accelerate the rollout of our technology in real-world customer environments guiding clients from initial technical conversations, through live trials, and into paying production. Our technology sits at the fascinating intersection of mobile, cloud, manufacturing, machine vision, and materials science. You will be highly comfortable working at the boundary of the physical and digital worlds, confident in solving unprecedented problems, and keen to leverage automation and AI to build scalable, repeatable playbooks. Key Responsibilities of the Senior Applications Engineer: Partner with the commercial team as the senior technical voice, setting realistic expectations regarding risks, dependencies, and timelines. Lead customer trials from inception to completion, integrating our technology seamlessly into client systems and operational workflows. Spend time on-site during live production tests, rapidly diagnosing and resolving issues across hardware, software, and manufacturing points. Build repeatable tools, processes, and playbooks to allow multiple, parallel customer implementations to run concurrently. Train customer teams to ensure they are production-ready, and feed field-tested insights back into our internal Platform and Materials teams. Skills and Experience: Experience in applications, field, or implementation engineering, with sharp troubleshooting instincts during live trials, commissioning, or production ramp-ups. Strong experience implementing solutions that combine physical hardware with software workflows (e.g., mobile SDKs, cloud APIs). Prior experience in a startup or scale-up environment, demonstrating practical judgment amidst ambiguity and a track record of optimizing delivery processes. Exceptional communication skills, confident engaging with engineering, operations, and IT stakeholders. Comfort utilizing AI tools for speed and process execution is highly valued. Ability to work from our Lancaster office 3 4 days a week (during active programmes) and a willingness to travel regularly to UK and international customer sites. Experience with machine vision systems, production/print lines, or Quality Control (QC) systems. Experience within the security printing, anti-counterfeit, or brand protection industries. What s on Offer? £60k - £70k base salary + annual performance bonus + participation in the company share scheme. 30 days annual leave plus bank holidays. Hybrid working model and flexible working hours. A comprehensive relocation package is available if you are looking to move closer to Lancaster. Pension scheme, Cycle to Work scheme, and a continually evolving benefits package. How to Apply If you are a senior engineer who thrives on being close to the real problem, loves working directly with customers, and enjoys making complex systems work in live production, we want to hear from you. Apply today to shape the future of global brand security.

SRT Marine Systems plc (SRT) is a market leader in the domain of international marine surveillance technology and systems. We are a respected, established, and an ambitious multi-national company headquartered in the UK with a global customer base. The company has a worldwide impact in the marine sector by leading the next generation of maritime domain awareness technologies "MDA", products, and systems that significantly enhance security, safety, environmental protection, and sustainability. Our customers are global and range from the largest national coast guards to individual vessel owners. SRT is an exciting company where high-quality results are rewarded. We are ambitious and constantly seek to innovate in order to deliver better products and services to our customers. We strive to make SRT a rewarding and challenging place to work, where talented, hard-working individuals have the opportunity to make a real impact across the marine industry. We are seeking a Sensor Software Engineer to design, develop, and integrate sensor capabilities within a Marine Domain Awareness (MDA) platform. The role focuses on ingesting, controlling, and processing data from coastal surveillance cameras, radio direction finders (RDF), radar, AIS, and other maritime sensors, and exposing this data in a consistent, operationally robust format. The role of Sensor Software Engineer is a hands-on engineering role requiring strong C#/.NET development skills, experience working with real-world sensor systems, and the ability to partner effectively with AI/ML components to deliver intelligent detection, classification, and tracking capabilities. About the role of Sensor Software Engineer - (not exhaustive): You'll work on the "sensors at the fringe" fixed and mobile surveillance equipment such as radars, cameras, RDF, AIS, and other specialist maritime sensors. Your mission as a Sensor Software Engineer will be to integrate, calibrate, and optimise these systems in non-production environments, building the software that makes their outputs usable for downstream systems and training our Delivery Team for field deployment. The role of Sensor Software Engineer spans multi-domain sensor fusion, AI-assisted analysis, anomaly detection, augmented reality, autonomous sentry operation, and evidence collection. You'll work closely with colleagues across software, hardware, data science, and infrastructure to bring innovative, high-performance edge solutions to life. Sensor Integration & Control Develop integrations with maritime sensors including: Coastal surveillance cameras (e.g. PTZ, thermal, EO/IR) Radio Direction Finders (RDF) Radar and AIS data sources Implement control interfaces (e.g. PTZ, presets, tracking handoff) Work with proprietary and undocumented APIs where required Backend Development (.NET) Build robust services using C# and .NET Develop APIs and services for downstream consumers Optimise for performance, reliability, and low-latency processing Work within distributed, containerised environments System Integration Work across a distributed system (e.g. message brokers, microservices) Integrate with existing platform components and abstraction layers Support deployments in on-prem / air-gapped environments Required Skills & Experience Core Engineering Strong experience in C# and .NET (Core / .NET 6+) Solid understanding of distributed systems and event-driven architectures Sensor / Domain Experience Experience integrating or working with any of: Surveillance cameras (PTZ, ONVIF, RTSP, video streams) Radio systems or RDF Radar, AIS, or similar telemetry sources Comfortable working with hardware interfaces and imperfect APIs Systems & Infrastructure Experience with: Messaging systems (e.g. RabbitMQ or similar) Containerisation (Docker) Linux-based deployments Understanding of performance, scaling, and resilience challenges Desirable Experience Experience in maritime, defence, or surveillance domains Familiarity with video processing pipelines Experience working in air-gapped or high-security environments SRT Marine Systems plc is an equal opportunity employer. We are committed to creating an inclusive environment for all employees and welcome applications from all backgrounds.

SRT Marine Systems plc (SRT) is a market leader in the domain of international marine surveillance technology and systems. We are a respected, established, and an ambitious multi-national company headquartered in the UK with a global customer base. The company has a worldwide impact in the marine sector by leading the next generation of maritime domain awareness technologies "MDA", products, and systems that significantly enhance security, safety, environmental protection, and sustainability. Our customers are global and range from the largest national coast guards to individual vessel owners. SRT is an exciting company where high-quality results are rewarded. We are ambitious and constantly seek to innovate in order to deliver better products and services to our customers. We strive to make SRT a rewarding and challenging place to work, where talented, hard-working individuals have the opportunity to make a real impact across the marine industry. We are seeking a Sensor Software Engineer to design, develop, and integrate sensor capabilities within a Marine Domain Awareness (MDA) platform. The role focuses on ingesting, controlling, and processing data from coastal surveillance cameras, radio direction finders (RDF), radar, AIS, and other maritime sensors, and exposing this data in a consistent, operationally robust format. The role of Sensor Software Engineer is a hands-on engineering role requiring strong C#/.NET development skills, experience working with real-world sensor systems, and the ability to partner effectively with AI/ML components to deliver intelligent detection, classification, and tracking capabilities. About the role of Sensor Software Engineer - (not exhaustive): You'll work on the "sensors at the fringe" fixed and mobile surveillance equipment such as radars, cameras, RDF, AIS, and other specialist maritime sensors. Your mission as a Sensor Software Engineer will be to integrate, calibrate, and optimise these systems in non-production environments, building the software that makes their outputs usable for downstream systems and training our Delivery Team for field deployment. The role of Sensor Software Engineer spans multi-domain sensor fusion, AI-assisted analysis, anomaly detection, augmented reality, autonomous sentry operation, and evidence collection. You'll work closely with colleagues across software, hardware, data science, and infrastructure to bring innovative, high-performance edge solutions to life. Sensor Integration & Control Develop integrations with maritime sensors including: Coastal surveillance cameras (e.g. PTZ, thermal, EO/IR) Radio Direction Finders (RDF) Radar and AIS data sources Implement control interfaces (e.g. PTZ, presets, tracking handoff) Work with proprietary and undocumented APIs where required Backend Development (.NET) Build robust services using C# and .NET Develop APIs and services for downstream consumers Optimise for performance, reliability, and low-latency processing Work within distributed, containerised environments System Integration Work across a distributed system (e.g. message brokers, microservices) Integrate with existing platform components and abstraction layers Support deployments in on-prem / air-gapped environments Required Skills & Experience Core Engineering Strong experience in C# and .NET (Core / .NET 6+) Solid understanding of distributed systems and event-driven architectures Sensor / Domain Experience Experience integrating or working with any of: Surveillance cameras (PTZ, ONVIF, RTSP, video streams) Radio systems or RDF Radar, AIS, or similar telemetry sources Comfortable working with hardware interfaces and imperfect APIs Systems & Infrastructure Experience with: Messaging systems (e.g. RabbitMQ or similar) Containerisation (Docker) Linux-based deployments Understanding of performance, scaling, and resilience challenges Desirable Experience Experience in maritime, defence, or surveillance domains Familiarity with video processing pipelines Experience working in air-gapped or high-security environments SRT Marine Systems plc is an equal opportunity employer. We are committed to creating an inclusive environment for all employees and welcome applications from all backgrounds.

C# Simulation Engineer You will take ownership of developing complex software components that simulate sophisticated weapon systems and bring synthetic environments to life. This role allows you to influence the full lifecycle of advanced technology while expanding your technical capability within a specialist simulation and experimentation team. You will see your real-time software integrate directly with hardware to create true representations of world-class systems. Essential requirements Sole British nationality is required due to workload classification Strong software engineering background with practical C# development experience Experience with real-time simulations using C++ or C# Key responsibilities Develop real-time software components using agile scrum methodologies to simulate complex defence systems Integrate real hardware components with models and synthetic environments to achieve precise system representations Provide critical visualisation, demonstration, verification, and validation support across the full product lifecycle Collaborate with a specialist engineering team to advance the use of distributed simulation in sophisticated system design Skills and background Proficiency in C# software engineering within a technical environment Knowledge of real-time software development and agile principles Experience with configuration control and unit testing or test-driven development Familiarity with continuous integration and continuous delivery or deployment pathways Perks and opportunitiesHere is how this employer helps you thrive: Bonus scheme providing up to 2,500 based on performance Secure your future with an excellent pension contribution matching up to 14% Regular opportunities to increase earnings via paid overtime options Excellent onsite facilities including subsidised meals and free car parking Generous parental leave policy offering up to 26 weeks of enhanced support Location and setup This position is based in Bristol and operates on a hybrid working pattern requiring two to three days onsite each week due to security classifications. Share your profile to arrange a short confidential call this week. You will be represented by a specialist technical recruiter who will guide you through each stage of the process. These vacancies are only open to British Citizens. This is a permanent role. Electus Recruitment Solutions provides specialist engineering and technical recruitment solutions to high-technology industries. Thank you for your interest. If you do not hear from us within seven working days, please presume your application has been unsuccessful on this occasion. You may resubmit your CV or details in the future, and we shall assess your suitability then.

Senior Cyber Security & Network Analyst The Opportunity in a Nutshell On behalf of our client, a leader in their industry , we are seeking a senior, hands-on technology professional with a deep foundation in Network Engineering (minimum 5-7 years of experience) coupled with strong Cyber Security expertise. This is not a purely monitoring role; the client requires an engineer who can lead from the front, physically and logically build infrastructure, and own complex technical projects from inception to completion. You will ensure the client's digital ecosystem remains resilient, highly performant, and securely aligned with evolving business objectives. Core Responsibilities As a senior technical anchor within the operations team, your daily focus will heavily lean into robust network engineering, system build-outs, and defensive security protocols: Infrastructure Installations & Kit Builds: Act as the technical lead for configuring, assembling, installing, and deploying new network and security hardware. Ensure all engineering documentation is immaculately maintained. Network Architecture Ownership: Maintain, optimize, and scale the client's Layer 2/3 environment, specifically managing Cisco Nexus routing, LAN/WAN frameworks, wireless networks, B2B links, and network load balancing solutions. Project Leadership: Spearhead mid-to-large scale infrastructure initiatives, ensuring deliverables are hit on time and within budget. You will be expected to demonstrate the tangible business value your technical decisions bring to the overall deployment process. Infrastructure Defense & Monitoring: Oversee next-generation Palo Alto firewalls, intrusion prevention systems, and data encryption protocols. Monitor SIEM platforms and threat feeds to isolate, investigate, and remediate digital vulnerabilities. Collaboration & Mentorship: Partner closely with internal technical squads and coordinate with external vendor partners. Provide coaching and technical advice to team members to foster a culture of continuous improvement. What The Client Is Looking For To thrive in this fast-paced environment, candidates must possess a blend of seasoned engineering experience and a structured, methodical approach to problem-solving. Technical Competencies: Minimum of 5-7 years of dedicated experience implementing, supporting, and developing complex L2/3 network architectures. Proven track record of leading and performing new network installations and physical/logical kit builds. Deep technical proficiency configuring and supporting L2/3 Cisco Nexus switching frameworks and Aruba Wi-Fi environments. Solid understanding of Network Load Balancing mechanisms and coordinating third-party Penetration Testing. Strong secondary expertise in Cyber Security, specifically administering Palo Alto Firewalls alongside their advanced next-gen service suites. Background utilizing Qualys Vulnerability Management tools and endpoint detection/remediation software. Previous experience navigating SOX compliance frameworks and handling fast-paced data environments is highly desirable. Application Requirement: Project Examples Our client values real-world execution. As part of your application, please be prepared to provide specific examples of projects where you led from the front on network or security kit deployments. We will look for details on: The scope of the hardware/software deployment you personally executed. The specific technical challenges you overcame during the installation or build phase. The tangible value and security/performance improvements your role brought to that process. Growth, Support & Culture Our client believes in empowering their people to reach their full potential. Joining this team means benefiting from: Structured Progression: Clear objective setting, tailored 1:1 mentorship sessions, and consistent coaching to elevate your architectural capabilities. Empowerment & Autonomy: An inclusive culture that grants ownership of meaningful outcomes and encourages exploration of development opportunities outside your immediate remit. A Collaborative Space: A supportive management philosophy designed to give employees the resources they need to excel while allowing them to bring their authentic selves to work every day.

Specialist Field Engineer - EPoS & IT Field Services Field-Based Role UK Travel Required Take your engineering career to the next level If you are an experienced EPoS Field Engineer looking for more than just standard break-fix work, this is your opportunity to step into a high-impact, multi-skilled Specialist Field Engineer role. At Barron McCann, you will not just fix issues. You will play a critical role in keeping major retail and hospitality operations running, while also delivering next-generation technology deployments for some of the UK's most recognised brands. Why this role stands out This role combines high-level fault resolution, project delivery, technical leadership, and exposure to EPoS, networking, WiFi, and infrastructure technologies. You will be trusted as a go-to technical expert in the field, someone who can solve, install, improve, and influence. Your impact As a Specialist Field Engineer, you will respond to critical break-fix scenarios, diagnosing and resolving hardware, software, and network issues quickly to minimise downtime. You will also deliver installation and deployment projects, ensuring systems are configured, tested, and integrated into live environments. What you will be doing Handling escalated technical calls and complex fault scenarios Installing and configuring EPoS, IT hardware, networking, and WiFi solutions Performing site surveys for installations and upgrades Carrying out planned maintenance and proactive service visits Diagnosing faults to component level or replacing full units where required Supporting project work independently or within a team Coaching and mentoring other engineers Working closely with planning and project teams What we are looking for Experience as a field-based EPoS or IT Engineer Knowledge of hardware, peripherals, and IP networking Experience in installations and break-fix environments Strong troubleshooting and problem-solving skills Clear communication skills A proactive and adaptable approach with strong organisational skills What you can expect A varied role with ownership and autonomy Opportunities to develop skills across new technologies A step up into a more senior, solutions-focused role Ongoing training and exposure to new systems A supportive environment where your expertise is valued Things to know This is a field-based role with extensive travel Out of hours work, overnight stays, and night work may be required A full UK driving licence is essential If you are an experienced field engineer looking to broaden your skillset, take on more technical responsibility, and play a key role in both support and deployment, we would love to hear from you.

Cure Talent are delighted to be partnered with an emerging wearable medical technology company at a defining stage of its growth. Developing next-generation optical monitoring solutions designed to deliver medical-grade physiological insights beyond the hospital environment, the business is now transitioning from research and development into industrialisation and regulated market entry. We have an opportunity for a Software Engineer to join the organisation at a pivotal point in its journey. This role will play a key part in developing the software ecosystem surrounding a next-generation wearable medical device platform, with a particular focus on SDK development, desktop applications and third-party integration. Working closely with firmware, hardware and data science teams, you will help translate advanced physiological monitoring technology into robust, compliant software solutions suitable for clinical studies and commercial deployment. Key responsibilities Develop SDKs and software interfaces enabling third-party integration with wearable medical devices and physiological monitoring platforms Design and develop desktop applications supporting clinical studies, device configuration and customer integration activities Support the integration of signal processing algorithms into validated, production-ready software solutions Work closely with firmware, hardware and data science teams to ensure reliable communication, data transfer and system integration Generate and maintain software documentation, traceability, verification and validation activities in accordance with IEC 62304 Contribute to software architecture, development processes and testing approaches suitable for regulated medical device environments Experience and skills required Experience developing desktop applications using technologies such as C#, .NET, C++ or similar Experience building APIs, SDKs, software interfaces or integration layers for connected devices Proven experience working within medical devices or other regulated environments, with hands-on exposure to IEC 62304 Experience integrating software with BLE, wireless devices or other connected hardware systems Strong understanding of verification, validation, traceability and medical device software development processes Comfortable working within a small, multidisciplinary product development team If you're a software engineer looking to play a key role in bringing next-generation wearable medical technology to market, whilst working at the intersection of software, hardware, data science and clinical innovation, we'd love to hear from you.

Embedded Software Engineer Location: Stroud, Gloucestershire Salary: Up to 70,000 KO2's client is a fast-growing, well-funded tech start-up developing advanced sensing and monitoring systems using low-power embedded platforms, intelligent signal processing, and secure wireless connectivity. The Role You'll lead the full embedded development lifecycle, from requirements and system architecture through to firmware development, integration, and production release. You'll work closely with hardware, data, and product teams to deliver robust, low-power sensing solutions for real-world environments. Key Responsibilities Develop low-power embedded firmware in C/C++ Design for battery-operated, ultra-low power systems Implement sensor data acquisition and signal processing (e.g. MEMS microphones, accelerometers) Develop RF communication systems (LoRa/LPWAN, mesh networking) Implement secure communications (encryption, authentication, secure boot) Deploy optimised machine learning models on embedded devices Essential Experience Strong embedded C/C++ development experience Full product lifecycle experience (concept to production) Low-power system design expertise Sensor data processing and RF communications (LoRa or similar) Embedded security and debugging skills Desirable ML for acoustic detection MEMS microphone systems OTA updates and noise mitigation Start-up experience If you're looking to build intelligent, low-power sensing systems from the ground up, KO2 would love to hear from you.

Exciting Opportunity: Join a Cutting-edge Global Company as a Technical Support Engineer Are you a skilled Technical Support Engineer with hands-on experience in Trend & Tridium BMS Systems? Are you ready to propel your career with a pioneering industry leader, driving innovation in energy-efficient technology on a global scale? If so, we want to hear from you! About Us: Our client, a forward-thinking organization, is at the forefront of designing and delivering state-of-the-art, energy-efficient infrastructure, ensuring the utmost confidentiality for our clients. Join them as a dedicated Technical Support Engineer and play a pivotal role in supporting our client's business needs. Position: Technical Support Engineer Type: Permanent Location: Onsite (M4 Corridor, UK) Salary: £competitive Why Join Us? Innovative Global Impact: Be part of a visionary team dedicated to revolutionizing energy-efficient technology on a UK and international stage. Career Advancement: Unlock a world of opportunities for professional growth and development. Cutting-edge Environment: Immerse yourself in the dynamic world of groundbreaking technological solutions, collaborating with some of the best leaders in the field. Key Responsibilities: Provide technical support and commissioning assistance to internal teams. Diagnose and troubleshoot complex software and hardware issues, specializing in Trend and Tridium BMS Systems. Address network concerns, configure operating systems, and deliver remote assistance. Rapidly resolve client queries via email, phone, or in-person interactions. Craft clear instructions and technical manuals for intricate problems. Collaborate with onsite subcontractors, ensuring project milestones and quality benchmarks. Research, identify, and implement software and hardware solutions. Conduct BMS PPM tasks and manage control system issues through resolution. Deliver exceptional customer service by effectively guiding clients through issue resolution. Escalate unresolved matters to appropriate internal teams. Document and catalogue all issues and their resolutions. Prepare comprehensive and timely reports. Share technical insights through meticulous note-taking and manual creation. Required Qualifications: Proven experience in service engineering, technical roles, or related fields. Hands-on proficiency in technical problem-solving. Thorough understanding of computer systems, mobile devices, and tech products. Proficiency in diagnosing and resolving basic technical issues. Familiarity with remote desktop applications. Outstanding problem-solving and communication abilities. Skill in delivering clear step-by-step technical assistance. Experience with Tridium AX & N4 systems and Trend systems. Previous involvement in system commissioning. Preferred: Bachelor's Degree. Join our Client in driving innovation and making a significant impact in the world of energy-efficient technology. Apply now and be part of their dynamic team! To ensure that your application receives the fullest possible attention, it is essential that you consider carefully the role that you are applying for, please ensure that your CV contains all relevant information about yourself in relation to the specific role advertised. This is important as in the present economic climate, we are receiving huge amounts of applications and thus it will help your application if your CV and covering letter state all relevant information clearly. Due to this unprecedented increase in applications, we are unfortunately unable to respond to each application personally (which would normally be our preferred method of communication). Hence, if you do not hear from us within one week, we regret you must conclude on this occasion your application for this role has been unsuccessful, we will, however, keep your details for any future opportunities that we may deem you suitable for. As a Recruitment Consultancy you will be required to attend a "virtual meeting" with one of our Consultants prior to your details being submitted to our Clients. Taylor Made Recruitment Services are an equal opportunities employer and encourage applications from all areas of society

Job Title: NPI Project Manager Location: Plymouth, Devon Salary: £50,000.00 - £52,000.00 plus bonus Contract Type: Permanent This is a full-time position, Monday Friday, 39 hours per week. Our client believes in driving innovation and excellence. There clients include some of the world s leading technology companies major players in software, hardware, and cloud computing. And specialises in enclosures, climate control systems, power distribution, and IT infrastructure for industrial and IT applications. The Opportunity We are seeking a proactive and results-driven NPI Project Manager to drive the successful introduction of new products from concept through to launch. In this pivotal role, you will manage timelines, budgets, resources, and risks, ensuring every project aligns with customer and business objectives. You ll be the crucial link between product development and our complex manufacturing environment. Key Accountabilities Lead cross-functional teams (engineering, manufacturing, supply chain, quality, sales, etc.) to deliver new products on time, within scope and budget. Develop and maintain detailed project plans, timelines, and resource allocations for all NPI activities. Drive project governance through phase-gate reviews, risk assessments, and issue resolution. Collaborate with customers, design, operations, and commercial teams to define project requirements and deliverables. Coordinate prototype builds, testing, validation, and pilot production. Track and report on project performance using KPIs and dashboards for stakeholders and senior leadership. Manage changes to project scope, schedule, and costs using robust change control processes. Ensure compliance with internal processes, industry standards, and regulatory requirements. Support transfer to production and product launch readiness, including documentation, training, and supply chain ramp-up. Key Performance Indicators Time: On-time delivery to customer expectations, aligned with internal stakeholders. Cost: Effective budget management, delivering cost-effective solutions for both company and customer. Quality: Meeting internal and customer-driven quality standards. Relationships You will build and maintain strong relationships with both internal and external stakeholders, including engineering, manufacturing, supply chain, quality, sales, customers, and suppliers. Qualifications & Experience We welcome candidates from all backgrounds. To succeed, you ll bring: Bachelor s degree in Engineering, Business Management, Project Management, or a related field. PMQ or equivalent project management certification preferred. Substantial project management experience, ideally within a manufacturing environment. Strong understanding of product development lifecycles. Proficiency in project management tools and NPI processes. SAP experience is advantageous. Excellent leadership, communication, and organisational skills. Strong problem-solving abilities and attention to detail. Ability to manage multiple priorities and stakeholders in a fast-paced environment. What We Value Teamwork: Collaborating effectively across diverse teams. Training: Commitment to continuous learning and development. Communication: Clear and confident communication at all levels. Recognition: Respect for diverse perspectives and contributions. What s in it for you? Opportunity to make a real impact Room for innovation and creativity Career growth and development Collaborative, supportive environment Recognition and rewards Rewards Package We re offering a salary of £50,000 - £52,000 plus bonus based on your qualifications and experience 33 days annual leave (including bank holidays) plus holiday purchasing scheme Life insurance 3 x your salary Pension contributions matched to 5% Access to our Westfield Health provision Access to our Smart Spending platform If interested, APPLY NOW! Alternatively, please send a copy of your CV to (url removed)

Technical Manager High Performance Computing An exciting opportunity is available for an experienced Technical Manager - High Performance Computing to support the development and delivery of next-generation BEV and PHEV electrical/electronic architectures. This senior technical leadership role will focus on the delivery and integration of HCP4 systems, ensuring projects are delivered to timing, quality, and cost targets. The successful candidate will work cross-functionally across Engineering, Manufacturing, Quality, Suppliers, and wider Group stakeholders to support future vehicle technologies and electrical architectures. Key Responsibilities Technical ownership of HCP4 systems and related vehicle functions Delivery of software, hardware, and system integration activities Management of project timing, KPIs, budgets, and technical deliverables Cross-functional collaboration and supplier management Support technical roadmap development and future concept activities Lead issue resolution and continuous improvement initiatives Essential Experience Experience within the automotive industry delivering ECU-based systems Strong knowledge of Body Electronics and vehicle electrical architectures Understanding of systems engineering and product development processes Excellent communication and stakeholder management skills Experience working with suppliers and cross-functional engineering teams Degree-qualified in Engineering or equivalent Desirable Experience Chartered Engineer status German language skills This is an excellent opportunity to work on advanced automotive technologies within a highly innovative engineering environment. Disclaimer: This vacancy is being advertised by either Advanced Resource Managers Limited, Advanced Resource Managers IT Limited or Advanced Resource Managers Engineering Limited ("ARM"). ARM is a specialist talent acquisition and management consultancy. We provide technical contingency recruitment and a portfolio of more complex resource solutions. Our specialist recruitment divisions cover the entire technical arena, including some of the most economically and strategically important industries in the UK and the world today. We will never send your CV without your permission. Where the role is marked as Outside IR35 in the advertisement this is subject to receipt of a final Status Determination Statement from the end Client and may be subject to change.

Specialist Field Engineer EPoS & IT Field Services Field-Based Role UK Travel Required Take your engineering career to the next level If you are an experienced EPoS Field Engineer looking for more than just standard break-fix work, this is your opportunity to step into a high-impact, multi-skilled Specialist Field Engineer role. At Barron McCann, you will not just fix issues. You will play a critical role in keeping major retail and hospitality operations running, while also delivering next-generation technology deployments for some of the UK s most recognised brands. Why this role stands out This role combines high-level fault resolution, project delivery, technical leadership, and exposure to EPoS, networking, WiFi, and infrastructure technologies. You will be trusted as a go-to technical expert in the field, someone who can solve, install, improve, and influence. Your impact As a Specialist Field Engineer, you will respond to critical break-fix scenarios, diagnosing and resolving hardware, software, and network issues quickly to minimise downtime. You will also deliver installation and deployment projects, ensuring systems are configured, tested, and integrated into live environments. What you will be doing Handling escalated technical calls and complex fault scenarios Installing and configuring EPoS, IT hardware, networking, and WiFi solutions Performing site surveys for installations and upgrades Carrying out planned maintenance and proactive service visits Diagnosing faults to component level or replacing full units where required Supporting project work independently or within a team Coaching and mentoring other engineers Working closely with planning and project teams What we are looking for Experience as a field-based EPoS or IT Engineer Knowledge of hardware, peripherals, and IP networking Experience in installations and break-fix environments Strong troubleshooting and problem-solving skills Clear communication skills A proactive and adaptable approach with strong organisational skills What you can expect A varied role with ownership and autonomy Opportunities to develop skills across new technologies A step up into a more senior, solutions-focused role Ongoing training and exposure to new systems A supportive environment where your expertise is valued Things to know This is a field-based role with extensive travel Out of hours work, overnight stays, and night work may be required A full UK driving licence is essential If you are an experienced field engineer looking to broaden your skillset, take on more technical responsibility, and play a key role in both support and deployment, we would love to hear from you.

IT Engineer Wrexham - 5 days a week on-site 35,000 + bonus Our client in Wrexham is seeking an IT Engineer with a strong focus on network infrastructure and connectivity to play a key role in maintaining and enhancing their IT environment. This position will take ownership of network performance, availability, and security, while also supporting wider IT systems and contributing to ongoing digital transformation initiatives. You'll work closely with internal teams to ensure robust, scalable network solutions that underpin bespoke software platforms and business operations. Main duties and responsibilities: Deliver high-quality IT and network support, ensuring reliable connectivity and performance across the organisation Take ownership of network infrastructure, including configuration, monitoring, troubleshooting, and optimisation of switches, firewalls, and wireless networks Manage and support core networking technologies and services, including VLANs, VPNs, routing, and network security protocols Provide support across key systems: Active Directory, Server Management (Windows & Ubuntu), SQL (SQL Server & MySQL), Virtual Machines (VMware, vSphere), Backups (Veeam), Documentation (Confluence), and Synology DSM Work with Microsoft 365 and maintain strong knowledge of Windows operating systems Support network device installation and management, including switches, firewalls, routers, and associated hardware Assist with general software deployment, patching, and integration within a networked environment Maintain and improve the configuration, performance, and ongoing usability of interconnected systems and hardware Assist in monitoring network security, identifying vulnerabilities, and helping prevent potential threats and attack vectors The following skills and experience will be beneficial for this role: Experience providing hands on technical support around networking Experience with maintaining servers and firewalls as well as working with CISCO Passion for IT and the prevention of security threats and attack vectors Understanding of basic IT security principles Strong communication on all levels, including complex IT issues in simple terms Some of the benefits that come with this role: 20 days annual leave + bank holidays 19-21 non-working Fridays offered per year Annual company bonus Subsidised Onsite Restaurant Employer pension contributions 50% discount health plan membership, dental, medal treatment, private/GP consultants / health assessments, prescription charges my wellbeing, hospital cover, new child payment