242 jobs found

Join Our Team as an Electrical Technician Location: Slough- THIS IS A FIELD BASED ROLE AND WILL REQUIRE TRAVEL AROUND UK AIRPORTS. Contract Type: Permanent Salary: Up to 45k - Dependant on experience Working hours: Predominately Monday to Friday, some night works will be required accommodate the airport operation and project schedule. (08:00-17:00) or (20:00-05:00) Candidates must: Have the RTW in the UK (no sponsorship required) Be able to obtain an airside pass Have worked in the UK/have continuous references for the past 5 years Be able to obtain a DBS & clear criminal record Have a Full UK driving licence Electrical Technician Mission and Responsibilities Carry out the assembly and wiring of all electrical elements of Passenger Boarding Bridges (PBBs), including cabinets, consoles, lighting, and auxiliary components. Perform assembly, wiring, and testing of lifting systems, cabins, and rotundas by following engineering electrical diagrams, plans, and material lists. All work must comply with established schedules, quality standards, and company safety requirements. The ultimate goal is the correct and reliable installation of all electrical elements on the PBB. Knowledge and Previous Experience Education / Qualifications Intermediate vocational training in: Electrical installations and automation Electromechanical maintenance Specific Knowledge and Skills Ability to interpret electrical diagrams Ability to interpret engineering plans and material lists Product knowledge focused on the electrical scope of the role Safe handling of tools and equipment, including: Multimeter Hammer, drill, jigsaw, angle grinder Ladder, transport cart Manual and electric pallet trucks Overhead crane Occupational Risk Prevention training in accordance with metal sector regulations Desirable Knowledge and Skills IPAF MEWP operator licence SSSTS certificate (Site Supervisor Safety Training Scheme) Valid CSCS card Ethernet cable termination (RJ45 plugs and sockets) Experience handling large-diameter low-voltage cables for cable cutting work Previous Experience Minimum of 1 to 2 years' experience installing electrical systems Main Tasks and Activities The Electrical Technician role is subdivided according to functions and responsibilities. Line Electrical Assembly Technician - Assembly and Wiring Responsible for assembling and wiring electrical components within the boarding bridge, including: Wiring tunnels and cabins Installing and connecting tunnel and cabin electrical boxes Installing and connecting tunnel and cabin peripherals Wiring central units Connecting main cabinets Connecting lower and upper consoles Pre-assembling and assembling tunnel and cabin lighting Correctly identifying electrical elements to maintain traceability Auxiliary Workshop Electrical Assembly Additional responsibilities may include: Wiring, connecting peripherals, and testing lifting systems Assembling electrical elements in translation systems Electrical installation of rotundas Ensuring correct identification and traceability of all electrical components Line Electrical Assembly Technician - Testing and Commissioning Responsible for verifying correct operation of the PBB in line with company protocols and planning: Performing final electrical connections of the PBB Loading and calibrating software Simulating machine operation according to established protocols Applying self-control protocols, including: Testing hydraulic equipment of the lifting system Testing electrical installations of rotundas Verifying traceability of electrical components Carrying out measurement and consumption regulation checks Executing operating protocols to confirm full functionality Health, Safety, and Environmental Competencies Environmental Responsibilities Awareness of environmental aspects associated with the role Understanding of significant energy usage and control measures Responsible consumption of paper, water, and energy Correct segregation of waste: Hazardous waste: toner, batteries Non-hazardous waste: paper, plastic Health and Safety Knowledge of job-related risks and preventive measures Safe use and handling of equipment such as: Overhead cranes Forklifts Lifting platforms Correct use, inspection, and maintenance of personal protective equipment (PPE) Awareness of procedures: General safety actions Accident response Emergency response Adecco acts as an employment agency for permanent recruitment and an employment business for the supply of temporary workers. The Adecco Group UK & Ireland is an Equal Opportunities Employer. By applying for this role your details will be submitted to Adecco. Our Candidate Privacy Information Statement explaining how we will use your information is available on our website.

Administrator/Coordinator Salary: £25000 to £27,000 dependant on experience, plus GREAT benefits Location: Chandler's Ford, Hybrid is available once trained Hours: Full-time, permanent (Monday Friday) either 8AM-4PM or 9AM-5PM Dynamite Recruitment is working in partnership with a well established business based in Chandlers Ford. With an excellent track record of offering fantastic opportunities to candidates across the country, our client is looking for a temporary Purchasing Administrator/Coordinator to join our expanding team at our head office in Chandler's Ford. As an Administrator/Cooridnator you will play a key role in managing stock allocation, purchasing, and general administration within a specialist team. Key Responsibilities: Onboarding new technicians using processes and internal systems Manage stock control for the warehouse team using specialist systems. Handle a range of purchase orders, ensuring accuracy and efficiency. Organize stock and uniforms for new starters and leavers. Sourcing lockups for technicians. Process technician-related stock requests promptly and efficiently. Maintain a busy inbox and ensure timely responses to emails within agreed timeframes. Allocate staff appropriately and raise requests for any discrepancies that may arise. Communicate with technicians and various departments to manage stock requests and resolve any issues. Complete general administration. Liaising between third parties and stakeholders to manage various enquiries. The Ideal Candidate: Strong administrative skills with an ability to handle multiple tasks. Experience working under pressure in a busy and fast-paced environment. Computer literate, including proficiency with Excel. Highly organized with the ability to multitask and prioritize workloads effectively. A proactive, self-motivated individual who is keen to take ownership of responsibilities. A team player who can also work independently and take accountability for tasks. If you re ready to contribute to a fast-growing business and join a supportive, dynamic team, we d love to hear from you!

Lead Development Technician / Senior Development Technician Department: Engineering Reporting to: Senior Engineering Manager Direct Reports: None Overview This role focuses on supporting the build and testing of prototype products across a range of next-generation mechanical and electrically driven systems. The position operates within a fast-paced development environment and requires strong collaboration across engineering functions to meet project deadlines, quality standards, and performance targets. The successful candidate will take a hands-on approach while also providing leadership within a technical team setting. Requirements Approximately 10+ years of relevant industry experience HNC (or equivalent practical experience) in a relevant engineering discipline Key Responsibilities Lead prototype build and test activities Maintain effective organisation and control of workshop operations and inventory Support and mentor junior technicians Collaborate with engineering teams to deliver technical solutions during product development and validation Carry out safety inspections relating to plant and machinery Analyse test data and produce performance reports Ensure adherence to build control plans and verification processes Coordinate planned maintenance and shutdown activities Provide technical support or cover for engineering responsibilities when required Essential Skills & Experience Experience working in low-volume, prototype or development environments Background in research and development or new product introduction programmes Hands-on experience with mechanical systems and assemblies Strong analytical skills relating to both mechanical and electrical components Practical machining experience (e.g. drilling, grinding, fabrication) Experience with performance, durability, and environmental testing Familiarity with pumping or fluid handling systems Understanding of data acquisition and instrumentation principles Strong organisational and leadership capability Desirable Skills Knowledge of CAN communication protocols (e.g. J1939, CANopen) Experience with CNC machining processes Familiarity with CAD tools (e.g. Creo, Windchill, or similar) Fabrication experience Awareness of product quality planning and validation processes Exposure to development verification and validation documentation General Expectations All employees are expected to: Quality & Customer Focus Deliver work to a high standard in line with company procedures Maintain a strong focus on quality and customer outcomes Health & Safety Follow safe working practices at all times Take responsibility for personal and team safety Maintain equipment and report defects Environmental Responsibility Support initiatives to reduce waste and energy consumption Follow environmental policies and best practice Professional Development Continue to develop technical skills and product knowledge Undertake training where required for new tasks or equipment

Job Title: Technician 1 Main Purpose of the Role: To carry out basic production, testing, and support tasks under supervision, following established procedures and company policies. The role focuses on accuracy, safety, and maintaining quality standards. Pay: 15.41 per hour Shift Pattern: Monday - Friday 6:am - 2pm and 10pm (rotating) Main Responsibilities: Operate manufacturing and laboratory equipment according to standard procedures Follow instructions to produce medical products safely and correctly Monitor processes and check that products meet quality standards Measure, prepare, and handle materials as required Inspect products and materials for faults or defects Record data accurately in company systems and complete documentation Carry out basic product testing and support lab activities where required Handle, store, and move materials, including stock control tasks Maintain clean, safe, and organised work areas in line with housekeeping standards Follow all health and safety regulations, including use of PPE Report issues, accidents, or equipment problems promptly Work with team members and communicate effectively Complete tasks on time and follow training requirements General Expectations: Follow company policies, procedures, and code of conduct at all times Maintain good timekeeping and attendance Ensure all work is carried out safely and in compliance with regulations Be willing to learn, improve, and support team activities Qualifications: Basic education including Maths and English No advanced experience required (entry-level role)

COMPANY OVERVIEW A leading UK-wide facilities management provider is continuing to strengthen its Fire & Security division across the South region. The organisation delivers specialist technical services to major retail and commercial clients, supporting large-scale estates with planned and reactive maintenance solutions. With a strong national presence and a reputation for operational excellence, the business provides fully integrated maintenance services across fire safety, security systems, electrical, and building compliance disciplines. The company is recognised for its structured processes, technical expertise, and long-standing client partnerships. An opportunity has arisen for a Fire & Security Technician to join the Nottingham region, delivering maintenance and compliance services across designated retail stores. COMPANY USP National Coverage with Dedicated Regional Support Operating across multiple UK regions while maintaining strong local engineering teams. Specialist Technical Expertise Delivering compliance-led fire and security solutions in line with current British Standards and industry regulations. Structured Service Delivery Model Clear KPIs, response times, and performance metrics supported by digital reporting systems. Long-Term Client Partnerships Supporting large, multi-site commercial portfolios with consistent, high-quality service. JOB PURPOSE To act as the technical specialist for designated stores, delivering first-call response and maintenance across Fire Alarms, CCTV, EAS, Access Control, PA systems, and Automatic Pedestrian Gates, ensuring full compliance and minimal disruption to store operations. JOB DUTIES Carry out planned preventative maintenance (PPM) and reactive repairs within agreed KPIs including response, first fix, and closure targets. Conduct Fire Alarm PPM visits in accordance with BS5839 standards. Ensure all Fire Alarm systems remain compliant with BS 5839 and report defects where necessary. Respond promptly to service calls from the Helpdesk during working hours and whilst on call. Identify non-repairable faults and recommend appropriate corrective actions. Order replacement parts in line with company procedures and ensure timely installation upon delivery. Complete all documentation and digital reports accurately in line with company standards. Liaise with site Duty Managers during each visit to communicate repair updates and operational risks. Carry out surveys and technical reports as required by management. Ensure all works are completed in line with Health & Safety policies and company procedures. Maintain tools and equipment to ensure readiness and compliance at all times. Attend relevant training courses and complete mandatory online training modules. Comply with all statutory regulations and company Health & Safety requirements. JOB RESPONSIBILITIES Represent the company in a professional and competent manner at all times. Build and maintain strong working relationships with client site teams and colleagues. Deliver work efficiently and cost-effectively while maintaining high technical standards. Ensure compliance with contractual obligations and service level agreements. Work collaboratively with internal teams to meet operational targets and service delivery standards. Demonstrate flexibility to support operational requirements and on-call rota participation. SKILLS & EXPERIENCE REQUIRED GCSE standard education or equivalent. Electrical competency qualification (NVQ or City & Guilds) desirable. Proven experience working with Fire Alarm systems and CCTV (IP and analogue). Full UK driving licence. Ability to work independently with minimal supervision. Good written and verbal communication skills. Customer-focused approach with a professional manner. PC literate and confident using digital reporting systems. Ability to distinguish colours as required for electrical/electronic maintenance work. Willingness to work flexible hours and participate in on-call duties. SALARY & BENEFITS £39,199 basic salary 42.5 hours per week, full-time permanent role 33 Days Holiday Company vehicle provided + Fuel Card Company pension scheme Private healthcare On-call rota participation (details discussed at interview) Ongoing training and development opportunities Supportive team environment within a national organisation Please call Jason on (phone number removed) and please apply to this advert to prompt a call back.

A Structural Steel Design Co-ordinator is responsible for planning, co-ordinating and monitoring the structural steel design process from initial design information through detailing, fabrication support and site installation support. The role ensures that drawings, models, calculations and technical queries are aligned with project requirements, buildability, programme, quality standards and relevant regulations. In practice, the role acts as the link between engineers, detailers, architects, fabricators, subcontractors and site teams to help deliver safe, accurate and efficient steelwork packages. Key Responsibilities • Co-ordinate the structural steel design process across internal teams, consultants, fabricators and site personnel. • Review structural and architectural drawings, specifications and design information for completeness, accuracy and buildability. • Manage design deliverables, drawing issue schedules, requests for information and technical submittals to meet programme deadlines. • Support the development and review of connection details, steel framing layouts, member sizing information and fabrication requirements. • Ensure models and drawings are co-ordinated with other disciplines, including architectural, civil and MEP requirements. • Identify clashes, discrepancies and technical risks early, and work with the project team to resolve them efficiently. • Liaise with clients, engineers, architects, subcontractors and suppliers to clarify technical requirements and maintain design progress. • Monitor compliance with relevant design codes, project specifications, health and safety requirements and quality procedures. • Provide technical support during fabrication and erection, including responding to site queries and managing design revisions. • Contribute to value engineering, sequencing reviews and practical design solutions that improve buildability, cost and programme outcomes. Required Qualifications & Experience • Degree, HND or equivalent qualification in Civil Engineering, Structural Engineering, Construction Engineering, or a related discipline. • Relevant experience in structural steel design, steel detailing, fabrication co-ordination or construction delivery. • Good understanding of structural steelwork, connection design principles, fabrication processes and site erection requirements. • Experience working with design and detailing software such as Tekla Structures, AutoCAD and, where relevant, Revit or other BIM platforms. • Ability to read and interpret engineering drawings, general arrangement drawings, fabrication drawings and specifications. • Knowledge of relevant design standards, quality procedures and project documentation requirements. • Experience of working within multi-disciplinary construction or engineering project teams. Essential Skills • Strong technical understanding of structural steel design and detailing. • Excellent co-ordination and communication skills with both technical and non-technical stakeholders. • Good planning, organisation and time management skills. • Ability to manage multiple design issues and priorities across live projects. • Problem-solving ability with a practical and buildable approach. • Attention to detail and commitment to drawing accuracy and document control. • Competence in Microsoft Office and common project/document management systems. • Awareness of health and safety, quality assurance and design change control processes. Typical Duties and Working Relationships: On a day-to-day basis, the Structural Steel Design Co-ordinator may attend design meetings, review drawing packages, track outstanding technical queries, co-ordinate model updates, liaise with fabrication teams on practical requirements and support site teams with design clarifications. The role typically works closely with structural engineers, architects, BIM technicians, project managers, quantity surveyors, production teams and erection crews to ensure the steel package is delivered safely, accurately and on time.

This is a fantastic opportunity to join a leading UK manufacturer in the Nottingham area, a company renowned for its innovation, investment in new technology, and commitment to employee development. This full-time, permanent role offers a competitive salary of 47,000+, generous overtime rates (x1.5/x2), and an outstanding benefits package including up to 10% pension, share options, and extensive training opportunities. Why Join as an Electrical Engineer? Competitive salary of 47,000+ plus premium overtime rates (x1.5 / x2) Monday to Friday - 40 hours per week Shifts: Mornings (6-2), Afternoons (2-10), Nights (10-6) Investment in training and upskilling - including PLCs, cross-skilling and health & safety Clearly defined career progression, including leadership and management pathways Up to 10% pension, share options, and a full benefits package (cycle to work scheme, retail discounts and more) Be part of an exciting period of growth with major investment in new production lines Your Role as an Electrical Engineer As an Electrical Maintenance Engineer, your focus will be on ensuring the safe and efficient operation of plant equipment. You'll join a skilled and collaborative team and take ownership of: Electrical maintenance and repairs on motors, conveyors, invertors, PLCs, control panels and automation systems Planned preventative maintenance (PPM) and reactive repairs Supporting continuous improvement and site upgrades Participating in project work and ongoing investment plans What We're Looking For in an Electrical Engineer Fully qualified: Advanced Electrical Apprenticeship (Level 3), or NVQ Level 3 & BTEC Level 3 in Electrical Engineering (or equivalent) Experience in a manufacturing or industrial environment Strong electrical fault-finding and problem-solving skills Able to work in a fast-paced, proactive maintenance setting Whether you're an experienced Electrical Engineer, Electrical Technician, or Multi-Skilled Maintenance Engineer with a strong electrical bias, this is a fantastic opportunity to grow with a respected, forward-thinking business. Apply now to take the next step in your career as an Electrical Engineer with a market-leading manufacturer!

Branch Operations Administrator East Kilbride Join a fast-paced, supportive team driving efficient branch operations We are currently recruiting a Branch Operations Administrator to join our client in East Kilbride. This is a fantastic opportunity to work in a dynamic environment where organisation, teamwork, and customer service are key to success. Key Details Location: East Kilbride Salary: Up to £26,000 per annum Role: Branch Operations Administrator Reporting to: Branch Manager Type: Mon - Fri Full-time, permanent About the Role As a Branch Operations Administrator, you will provide essential administrative and operational support to ensure the smooth day-to-day running of the branch. You'll work closely with the Branch Manager and wider teams, playing a key role in supporting scheduling, stock control, reporting, and customer communication. Key Responsibilities Operational & Administrative Support Assist the Branch Manager with daily operations and compliance Support stock control including ordering, deliveries, and reconciliation Maintain records, logs, and filing systems Assist with reports, KPIs, and general administration Manage banking, petty cash, and payment processing Planning & Scheduling Support scheduling of fitters and maintain accurate job records Communicate effectively with customers and technicians Update availability for booking teams Customer Experience Handle customer enquiries professionally Support aftercare processes and resolve issues Maintain high customer satisfaction standards Facilities, Health & Safety Assist with H&S compliance and record keeping Coordinate maintenance, cleaning, and general branch upkeep Ensure a safe and tidy working environment Compliance & Improvements Maintain GDPR compliance and confidentiality Ensure processes meet company standards Suggest improvements to increase efficiency What We're Looking For Essential: Highly organised with strong attention to detail Excellent communication skills Proactive, reliable, and able to multitask Customer-focused with a professional approach Competent with Microsoft Office and CRM systems Ability to work in a fast-paced team environment Desirable: Experience in administration, retail, or operations Knowledge of scheduling systems or booking processes Basic understanding of H&S and GDPR What's on Offer Stable, full-time position Opportunity to develop within a growing business Supportive and team-focused working environment Hands-on role with varied responsibilities Apply Now If you're an organised and proactive individual looking to build a career in operations and administration, we'd love to hear from you!

Job Role: Parks Team Leader Location: Newtownabbey area Pay Rate: 16.90- 18.35 per hour Hours: Monday- Friday 8-430pm Your role: To take lead responsibility for the day-to-day operation and management of respective Parks Operative teams under the direction of the Assistant Manager for a local Council. Your responsibilities: 1 Responsibility for the operational management of employees, vehicles, plant, and equipment at designated areas. 2 Responsible for the effective management of rotas, timekeeping, performance, attendance, and training needs of respective teams. 3 Assist in the management of all aspects of horticultural operations including preparation and planting of hanging baskets, floral displays, planters, and all other associated activities. 4 Assist in the management of the training and implementation of herbicide and fertilising programmes including monitoring service requirements to ensure proactive control of horticultural environment (e.g. Management of invasive species, weed control programmes etc). 5 Ensure that all mandatory health and safety policies, COSHH, manual handling, risk assessment and accident reporting procedures are rigorously implemented and adhered to within area of responsibility. 6 Investigate accidents/incidents promptly, liaising with the Health and Safety team where required and submitting all relevant paperwork within Council's target timescale. 7 Rigorously comply with Council's contracting, tendering and quotation systems/procedures. 8 Ensure strict compliance with all mandatory checks and paperwork relating to plant and equipment as set out by Council's Fleet Service. 9 Organise machinery checks, arrange and document repairs to vehicles, plant and machinery as required. 10 Advise the Parks and Assistant Manager on the plant and equipment replacement programme. 11 Where applicable, coordinate and deliver the maintenance of Council's Sports facilities within the respective area of work including golf courses, driving ranges, grass pitches, bowling greens, artificial surfaces including tennis, athletic tracks, synthetic pitches, and multi-use games areas, etc. 12 Take responsibility for ensuring Play Technicians Liaise report any issues or maintenance requirements relating to Play Parks and action promptly. 13 Assist in the implementation of adverse weather programme including salt/ gritting, and deployment of sandbags etc where and when required 14 Assist in the implementation of Council's Biodiversity Action Plan, liaising as necessary with the Parks Development Team. 15 Responsible for ensuring all requests/orders are processed within the appropriate computerised system. 16 Assist the Parks Administration team in resolving customer complaints or queries in a timely manner. 17 Where required and where relevant, liaise with external agencies on any matters relating to Council's Parks Service. 18 Where required, be a key-holder for allocated buildings, ensuring cleanliness and security of same and access where appropriate. 19 Take responsibility for your own Health and Safety and ensure all Health and Safety requirements are adhered to as per the Council's Health and Safety Policy. 20 To be available from time to time to carry out duties outside of normal office hours and in addition to basic contracted hours. Such additional hours will be remunerated in line with Council's approved policies at the time. 21 To be available to work flexibly in other services during emergencies. 22 Deputise for the Parks and Assistant Manager when required. You will have: - Hold an NVQ Level 1 in Amenity Horticulture/Landscaping or equivalent (Level 2 preferable) - Hold a full current driving licence (preferable to include C1+E to enable post holder to drive a vehicle and trailer combination) - Hold a CPC card - A minimum of two years' experience in the supervision of a team - As the post involves significant physical and manual handling elements, the post holder must be of a satisfactory level of general fitness Ready to lead your career forward, apply today with your CV! Blue Arrow is proud to be a Disability Confident Employer and is committed to helping find great work opportunities for great people.

Paint Sprayer / Vehicle Paint Technician - Night Shift Rolling Stock Maintenance / Vehicle Finishing Team Client: Alstom UK - Derby Large-scale rail manufacturing and refurbishment environment Voyager Refurbishment project and the follow-on CL222 Refurbishment project until September 2028 Role Purpose This role involves delivering high-quality paint finishing on large rail vehicles, including full surface preparation, priming, spraying, and final finishing. You will be working in a safety-critical, physically demanding production environment where precision and finish quality are essential. Candidates from a range of engineering and vehicle finishing backgrounds will be considered. Location & Working Pattern Location: Derby Shifts: Nights Minimum 48 hours per week Immediate starts available Key Responsibilities Carry out full surface preparation on rolling stock (sanding, keying, masking, filling) Apply primer and topcoat systems, including 2K paint systems Spray large vehicle surfaces to a high-quality standard Complete finishing work including polishing, defect removal, and snagging Carry out touch-ups and rectification work on completed vehicles Apply detailed livery designs accurately to specification Work from technical drawings, written instructions, and job sheets Maintain high standards of safety, cleanliness, and quality Work effectively as part of a fast-paced production team Shifts, Salary & Benefits Pay Rates: Note: The shift is a single continuous night shift with enhanced pay rates applied to overtime hours within the shift. Nights, Monday - Thursday (48 hr week total) 18.00 - 06.00 18.00 - 03.15: 24.06 PAYE / 32.24 Umbrella 03.15 - 06.00: 27.14 PAYE / 36.43 Umbrella Paid Breaks Required Skills & Experience Essential Previous experience in paint finishing or spray painting Ability to prepare, prime, and finish large surface areas Experience working from technical instructions and specifications Strong attention to detail and quality control Ability to work in a physically demanding environment Ability and willingness to work permanent night shifts Desirable Experience in rail, automotive, marine, aviation, HGV, or plant industries Water-based paint system experience Knowledge of 2K systems and Hydro topcoats Ability to mix and match paint colours accurately Experience with pressure pot spray systems Experience working with aluminium components (awareness of sensitivity considerations) Key Competencies Strong attention to detail and pride in workmanship Ability to follow structured processes consistently Team-oriented approach in a high-volume production environment Consistency across large surface applications Reliable and committed to shift-based work Safety-focused at all times Willingness to learn and develop new techniques Health, Safety & Compliance Drug & Alcohol test required prior to start Full compliance with PPE and site safety rules Safe handling of coatings, chemicals, and equipment Adherence to COSHH and environmental procedures Working within a safety-critical manufacturing environment # INDENG-BR Rullion celebrates and supports diversity and is committed to ensuring equal opportunities for both employees and applicants.

We are seeking a proactive and detail-oriented individual to join our team as a Test Technician. In this role, you will provide essential support to lead Test Engineers in various tasks related to site preparation, maintenance, and testing activities. Your responsibilities will include but are not limited to: Assisting in site preparation and maintenance tasks Conducting pressure and control systems checks Operating mechanical and steam vacuum systems Performing instrumentation calibrations Maintaining and operating steam boilers Operating high-pressure gas and fluidic systems Utilising electrical and electronic measurement and testing equipment Skills and Behavioural Competencies: Degree in Aerospace, Mechanical or Electrical Engineering, or equivalent Experience working with high-pressure gas systems Familiarity with electronics and High Voltage equipment

Seeking a skilled Senior Test Engineer with expertise in space propulsion. Responsible for overseeing firing site operations, including site preparation, maintenance, fuel and oxidizer handling, pressure systems. Key Responsibilities Design and manufacture of liquid propellant and high-pressure gas feed systems. Advanced training provision in key operational skills on firing sites. Proficient analysis and assessment of test data, producing high-quality analysis material. Adherence to COMAH controlled testing standards. Minimum Requirements: Mechanical fitter or practical engineering skills Ideally qualified to OU or equivalent graduate level course in engineering. Level 4 training on the Skills and Competency Matrix with in-depth experience.

Join our client in Southampton as a Motorcycle Workshop Controller and take a lead role within a well-established motorcycle dealership that prioritises organisation, customer satisfaction, and team development. This is a unique opportunity for a skilled professional to advance their career in a dynamic, supportive environment where expertise and dedication are highly valued. Benefits of a Workshop Controller: Competitive salary ranging from 30,000 to 39,000, dependent on experience Ongoing manufacturer training and professional development programmes Employee discounts on motorcycles, parts, and accessories Company pension scheme, life insurance, and sick pay benefits Spacious on-site parking facilities Opportunity to work in a modern, well-organised dealership within a reputable family-owned business with a rich history Supportive, community-oriented working environment promoting career growth and stability Duties of a Workshop Controller: Manage the daily workshop diary, ensuring efficient workflow and timely job delivery Allocate work to motorcycle technicians based on skill, capacity, and workload demands Monitor progress of repairs and services to meet deadlines and maintain high standards Liaise effectively with parts department to ensure parts availability and minimise delays Process job cards, warranty claims, and invoicing accurately and promptly Support the service team with updates on repair status and additional work requirements Maintain manufacturer compliance and uphold workshop standards in accordance with industry regulations Supervise and oversee the work of motorcycle technicians and support staff Contribute to delivering exceptional customer service and workshop organisation Assist in fostering a professional and productive team environment Requirements of a Workshop Controller: Previous experience as a Workshop Controller, Service Advisor, or in a similar workshop management role is preferred Knowledge of motorcycles or the automotive industry is highly desirable Strong organisational skills with the ability to multitask efficiently Excellent communication and team management skills Familiarity with Dealer Management Systems (DMS) is advantageous Professional, reliable, and detail-oriented approach to workshop operations Enthusiastic and proactive attitude towards workshop leadership Ambition to progress within the motorcycle trade or to assume greater autonomia Contact Kinga Csipetics, Automotive Recruitment Specialist at Perfect Placement covering Southampton and Hampshire today to discover more about this fantastic Workshop Controller opportunity. Our team of Automotive recruitment specialists are dedicated to finding the perfect match for both job seekers and employers in the motor trade. Don't settle for just any Motor Trade job - let us help you find the one to take the first step towards your dream Motor Trade career.

Fire & Security Engineer - Southampton Salary: 38,000 - 45,000 Service & Installation Role We're recruiting an experienced Fire & Security Engineer to join a well-established and respected company in Southampton. Known for delivering high-quality projects across commercial and residential sites, this company values its engineers and provides a professional, supportive, and team-focused environment with ongoing training and development opportunities. This is a hands-on service and installation role , giving you the chance to work across a range of systems, including fire alarms, CCTV, intruder alarms, and access control. You will be responsible for installing new systems, servicing and maintaining existing installations, troubleshooting faults, and ensuring all work meets industry standards and client requirements. The role includes: Installing fire and security systems across commercial and residential projects Servicing, maintaining, and fault-finding on existing systems Ensuring compliance with fire and security regulations and client standards Working within a skilled and supportive team What they're looking for: Proven experience in fire and security system installation and service Strong technical knowledge of fire alarms, CCTV, intruder alarms, and access control Reliable, professional, and self-motivated Good communication skills and ability to work independently or as part of a team Why this role stands out: Competitive salary 38k- 45k DOE Mix of service and installation work for variety and career development Supportive management and structured projects Ongoing training and clear progression opportunities Stable company with long-term projects This role is ideal for a Fire & Security Engineer looking for a varied, hands-on position with a company that values quality work, supports its engineers, and offers long-term career progression in Southampton. YOU MAY BE A; Fire & Security Engineer, Fire Alarm Engineer, Fire Alarm Technician, Fire and Security Technician, Fire Alarm Service Engineer, Service Engineer, Intruder Service Engineer, Security Engineer, Intruder Alarm Engineer, Fire Engineer, Electrical Engineer, Maintenance Electrician, Electrician INDAV

Controls & Automation Engineer 45,000 - 55,000 + Bonus + Excellent Benefits + Early Finish Fridays + Relocation Support Are you an experienced Controls & Automation Engineer looking for a hands-on role where you can make a real impact? This is an exciting opportunity to join a high-performing engineering team, working on a complex, 24/7 operational site where no two days are the same. This role combines technical problem-solving, project work, and leadership - giving you the chance to drive improvements, mentor others and play a key role in keeping operations running smoothly. What You'll Be Doing You'll be at the heart of operations, responsible for maintaining and improving control systems to minimise downtime and maximise performance. Your responsibilities will include: Troubleshooting and resolving complex control system issues Maintaining and enhancing PLC, HMI, and SCADA systems Leading and delivering engineering and automation projects Supporting site operations and ensuring rapid recovery from breakdowns Driving continuous improvement across control systems and equipment Managing contractors and working closely with internal teams Mentoring and coaching engineers, technicians, and apprentices What We're Looking For We're looking for someone who combines strong technical expertise with a proactive, problem-solving mindset. Essential: Electrical and instrumentation knowledge Experience with PLC, HMI and SCADA systems PLC programming skills HND (or higher) in an engineering discipline Strong verbal and written communication skills Desirable: Experience in a COMAH or heavy industrial environment Understanding of health, safety and environmental legislation Leadership, mentoring or coaching experience What You'll Get in Return 45,000 - 55,000 salary Bonus scheme (up to 2x target) 24-hour responsibility payment ( 3,150 per annum) 25 days annual leave plus 8 public holidays Company pension contribution (4%-9%) Life assurance (6x salary) Private medical insurance or healthcare cash plan plus dental scheme Onsite gym and wellbeing initiatives Employee Assistance Programme Education support grant ( 1,000 per child in university, paid annually) Cycle to Work scheme Employee rewards, recognition and discount programmes Additional benefits: Sign-on bonus (equivalent to one month's salary) Relocation support up to 8,000 Three months' rent covered Working Hours Monday to Thursday: 7:30am - 4:00pm Friday: 7:30am - 12:30pm (early finish every week) How to Apply: To apply for the role of Controls & Automation Engineer, please submit your CV direct for review or reach out to Georgie Ireland at E3 Recruitment for more information.

1st Line IT Support Technician Ipswich, Stowmarket and Felixstowe Our well-established and highly regarded client is looking for a 1st Line IT Support Technician to join their friendly, supportive and growing team. This is a fantastic opportunity for someone with around 12 months of IT support experience who is looking to develop their technical skills, gain exposure to a varied user base and progress within a company that genuinely invests in its people. The successful candidate will support multiple education sites across Ipswich, Stowmarket and Felixstowe , so a full UK driving licence and access to your own vehicle is essential. MFK Recruitment has proudly placed 46 IT professionals with this client over the past 5 years, and 32 are still with the company today . Their excellent staff retention reflects their positive culture, strong progression routes and commitment to developing their people. The Role As a 1st Line IT Support Technician, you will be the first point of contact for users across a range of education sites, providing technical support, troubleshooting issues and ensuring IT services run smoothly. You will be joining a collaborative team where no two days are the same, supporting a wide range of technologies including Microsoft 365, Azure, Windows, Active Directory, networking, device management and cloud-based systems. Day-to-Day Responsibilities As the 1st Line IT Support Technician, you will: Manage incidents and customer requests from initial receipt through to resolution and closure Provide professional, friendly and efficient IT support to end users Ensure service level agreement standards are met Troubleshoot and resolve a range of hardware, software, network and cloud-related issues Complete admin tasks, documentation and support records accurately and promptly Maintain accurate site information using IT Service Management tools Promote IT best practice across supported sites Follow change control processes and internal procedures Plan and organise your working week effectively across multiple locations Escalate more complex issues where required, while continuing to learn from senior team members Experience Required The client is not expecting someone to tick every box, but experience with some of the following would be beneficial: A minimum of 12 months commercial experience in an IT support role Microsoft 365, Azure, Windows, Active Directory and Windows Server Basic networking, including configuration, maintenance and troubleshooting Cloud technologies such as Microsoft 365, Azure, SharePoint and OneDrive Microsoft Endpoint Manager or similar device management tools Windows and Apple operating system support Backup solutions, including on-premise and cloud-based systems Experience supporting a range of IT technologies in a professional environment Strong communication skills and a customer-focused approach Good organisation skills and the ability to manage multiple support requests Why Apply? This is an excellent opportunity to join a company with a proven track record of retaining and developing its staff. You will be part of a supportive team, working in a varied role with the chance to build your technical knowledge and progress your IT career. A full UK driving licence and access to your own vehicle are essential, as travel to sites in Ipswich, Stowmarket and Felixstowe will be required.

Job Title: HIU Service Engineer Location: London Salary: Competitive salary (depending upon experience) + out of hours reactive calls Job Type: Permanent, Full Time About us: At Elevate, our core values shape the work environment and define our approach to everything we do. We prioritise respect, integrity, active listening, collaboration, diversity, inclusion, quality, lifelong learning, and health and safety. By embracing these values, you will become part of a community that fosters a positive and supportive culture. About the role: As HIU Service Engineer, you will be required to conduct servicing on HIU, Boiler or Cylinder systems. The HIU Service Engineer can identify issues with HIU function such as leaks, electronic components, underfloor heating manifolds or faults with the pre-payment system/pre-payment valve. In addition, the HIU Service Engineer will be working towards Elevate's best practice standards. Assist the administration team in the identification of issues found whilst completing HIU Service appointments, and highlighting the need for a reactive repair to be raised concerning part replacement, or a more experienced engineer being required to attend. Ensure the adoption of Safe Working Practices during works inside residents' properties. Make effective recommendations for continuous improvement. Ensure that Statutory and Mandatory Inspections are satisfactorily carried out and documented in line with the Company's Management System. Diligently and accurately maintain, submit relevant documentation and records as required, and maintain Company Standards. Provide a high standard of work and detailed step-to-step reports, referencing what you have been called for, the actions you have taken to rectify any issues, your final checks on the heating and hot water system and any further actions for your team, or other contractors. Adopt HSE Policies, Procedures and Objectives, and ensure they are achieved throughout area of responsibility. Ensuring PPE equipment is safe and in date for use. Be available to support other Evolve works, such as reacting to HIU breakdowns or works outside of the contractual agreement, supporting engineers and administrative departments in increasing first-time fix ratios. Available to assist in HIU Repairs and HIU Commissioning works as and when required. Be a part of the regular on-call rota. Any other duties consistent with the job description that may be required from time to time. About you: The ideal candidate will be well presented, wearing company uniform at all times, organised and polite. This is a client & customer-facing role, with excellent communication and customer service skills. A minimum of 2 years of experience working on various types of HIU/Heating and hot water systems. Completed a recognised apprenticeship and/or be qualified to City & Guilds/NVQ Level 2 in Plumbing/HVAC. A full UK driving licence and a flexible approach to working practices is essential. You will also be required to actively take part in the callout/standby rota. You will have a proactive approach in identifying issues and making sure they are understood, reporting them effectively to management and ensuring they are being addressed and closed out. You will have some experience on types of Energy Centres and District Heating networks. Being able to write a point-to-point report following attendance that is ready to be distributed to Client Stakeholders. Good customer service skills, able to work alone or as part of a team on various projects. Hot water systems or valid unvented hot water certification. Mechanical Biased with knowledge in a similar environment (Advantageous). Familiarity with a range of heating equipment and control (Advantageous). Upholds the standard that the HIU Technician and Senior Residential Engineers present. Has knowledge of heating systems - Direct and indirect and Energy Centre processes. Working understanding or accreditations in Electrical issues/repair would be advantageous. Willingness to study for relevant industry qualifications. Knowledge and understanding of renewable energies, such as air source Heat Pumps, solar thermal panels or biomass boilers, would be advantageous. What we offer: Competitive salary (depending upon experience) + out of hours reactive calls. Company van. Company Pension Scheme. Sickness insurance. Life Assurance. 24 days plus bank holidays. After successful completion of probation: CPD opportunities, Private Health Insurance and more. Additional Information: You will also be required to actively take part in the callout/standby rota. Please click on the APPLY button to send your CV and Cover Letter for this role. Candidates with experience of; HIU Technician, Heat Interface Unit Engineer, District Heating Engineer, Plumbing and Heating Engineer, HVAC Engineer, or Residential Maintenance Engineer also be considered for this role.

Lab Technician 35,000 + Full Training Provided Continental Shifts Major Expansion Plans Massive expansion plans. Full training provided. Long-term career opportunities. We are hiring multiple Lab Technicians for a rapidly growing advanced manufacturing business following major international investment and a huge site expansion programme. Offering starting salaries of 35,000, this is an excellent opportunity to join a secure and expanding business with genuine long-term progression and development opportunities. No direct industry experience is required, we are looking for reliable people with a strong attitude, good attention to detail, and the willingness to learn. If you have experience within manufacturing, production, assembly, warehousing, cleanroom, laboratory or technical environments, we want to hear from you. Important Information Before Applying : You will work permanent continental shifts consisting of both days and nights The shift pattern is 2 days, 2 nights, followed by 4 days off Due to the rural location of the site, own transport is essential You will be working within a full cleanroom PPE environment A positive attitude and willingness to learn are essential for success in this role Shift Pattern : 4 on / 4 off continental shifts: 2 x Days - 7am to 7pm 2 x Nights - 7pm to 7am Followed by 4 days off The Role : This is an opportunity to join a modern high-tech manufacturing environment where you will be working within a controlled cleanroom setting, supporting a range of precision production and inspection processes. The position involves a mixture of manual handling, microscope work, computer-based processing, quality checks, and operating specialised production equipment. You will receive full training and ongoing support as part of a growing team within a business investing heavily into its future operations and workforce. Key Responsibilities : Working within a cleanroom and laboratory-style manufacturing environment Following detailed process and quality procedures Using microscopes and specialised equipment for inspection work Supporting precision manufacturing and production activities Accurately recording production data using internal computer systems Working to strict quality, safety and cleanliness standards Contributing towards team production and delivery targets What We're Looking For : Good attention to detail and accuracy Positive attitude and willingness to learn Comfortable working within a cleanroom environment Good communication and teamwork skills Stable work history and reliable attendance Basic computer literacy Previous experience within manufacturing, cleanroom, laboratory, production or technical environments is beneficial but not essential What's on Offer : 35,000 starting salary Full training and structured onboarding Genuine long-term career progression Opportunity to join a business undergoing major expansion Modern, clean and highly technical working environment Excellent job stability and future opportunities Supportive team culture and long-term development opportunities We are the exclusive recruitment partner for these positions. All applications and interviews will be managed directly through us. This is an excellent opportunity for candidates looking to build a long-term career within an advanced manufacturing environment with significant future growth plans.