Assembly Operator Location: Farnborough, Hampshire (full time onsite) Duration: 6 months Rate: 19 per hour (PAYE) or 25.45 per hour (Umbrella) IR35: Inside IR35 Clearance: Eligible for SC Clearance (sole British nationality required) Overview A leading organisation within the Defence & Security sector is seeking an Assembly Operator to support both RMA and new build activity. Reporting to the Senior Supervisor (Operations), the role is focused on meeting department goals and delivering to customer requirements across repair, test and assembly. Responsibilities: Working as part of the assembly team to produce LRU's to the daily going rate. Re-work of circuit boards to IPC7711/7721 standard involving removal/replacement of surface mount components. Working on repair and processing of LRU's through troubleshoot ensuring correct use of in-house systems. Use of Automated Test Equipment (ATE) for the test of product. Use electronic systems to track repairs and update correctly. Check Assemblies meet quality standards and seek advice from supervisor or Manufacturing Engineer as necessary. Work with other Cell members using lean manufacturing techniques and participate in lean production activities. Maintain housekeeping in cell using 5S+1 techniques. Maintain quality levels of work in progress adhering strictly to IPC610 cat C. Update Work in Progress and output TAKT boards, record figures daily. Assist Supervisors, undertaking any reasonable task as directed. Skillset/experience required : Experience working across assembly, repair (RMA) and/or new build in an electronics manufacturing environment. Ability to re-work circuit boards (including removal/replacement of surface mount components). Comfortable using electronic systems to track repairs and update records accurately. Strong attention to quality. Team-oriented approach and good communication skills.
Jun 13, 2026
Contractor
Assembly Operator Location: Farnborough, Hampshire (full time onsite) Duration: 6 months Rate: 19 per hour (PAYE) or 25.45 per hour (Umbrella) IR35: Inside IR35 Clearance: Eligible for SC Clearance (sole British nationality required) Overview A leading organisation within the Defence & Security sector is seeking an Assembly Operator to support both RMA and new build activity. Reporting to the Senior Supervisor (Operations), the role is focused on meeting department goals and delivering to customer requirements across repair, test and assembly. Responsibilities: Working as part of the assembly team to produce LRU's to the daily going rate. Re-work of circuit boards to IPC7711/7721 standard involving removal/replacement of surface mount components. Working on repair and processing of LRU's through troubleshoot ensuring correct use of in-house systems. Use of Automated Test Equipment (ATE) for the test of product. Use electronic systems to track repairs and update correctly. Check Assemblies meet quality standards and seek advice from supervisor or Manufacturing Engineer as necessary. Work with other Cell members using lean manufacturing techniques and participate in lean production activities. Maintain housekeeping in cell using 5S+1 techniques. Maintain quality levels of work in progress adhering strictly to IPC610 cat C. Update Work in Progress and output TAKT boards, record figures daily. Assist Supervisors, undertaking any reasonable task as directed. Skillset/experience required : Experience working across assembly, repair (RMA) and/or new build in an electronics manufacturing environment. Ability to re-work circuit boards (including removal/replacement of surface mount components). Comfortable using electronic systems to track repairs and update records accurately. Strong attention to quality. Team-oriented approach and good communication skills.
Join a new small team at MBDA Bolton and become an expert in the field of Flying Probe Manufacturing Data Analysis, developing your skills and shaping the future of circuit card manufacturing in MBDA UK. Salary: Circa £45,000 depending on experience Dynamic (hybrid) working: 4-5 days per week on-site due to on-site equipment location. Security Clearance: British Citizen. Restrictions and/or limitations relating to nationality and/or rights to work may apply. As a minimum and after offer stage, all successful candidates will need to undergo HMG Basic Personnel Security Standard checks (BPSS), which are managed by the MBDA Personnel Security Team. What we can offer you: Company bonus: Up to £2,500 (based on company performance and will vary year to year) Pension: maximum total (employer and employee) contribution of up to 14% Overtime: opportunity for paid overtime Flexi Leave: Up to 15 additional days Flexible working: We welcome applicants who are looking for flexible working arrangements Enhanced parental leave: offers up to 26 weeks for maternity, adoption and shared parental leave -enhancements are available for paternity leave, neonatal leave and fertility testing and treatments Facilities: Fantastic site facilities including subsidised meals, free car parking and much more The opportunity: This is a newly developed team, working to transform the way that defects are located and corrected within Circuit Card Assembly manufacturing, utilising state-of-the-art Flying Probe test equipment to find faults fast and improve the fault investigation process for the test engineering teams. We are looking for a motivated and organised individual, who can work effectively both independently or as part of a wider team. A background in Electronic Engineering, alongside attention to detail and a methodical approach to test development are essential skills for the role. Any existing knowledge of Flying Probe systems (specifically SPEA systems) is welcomed but not essential. You will work alongside experienced manufacturing test engineers and deliver new Flying Probe test packages for the circuit cards created at MBDA's complex technologies site in Bolton. Other aspects of the job involve delivering timely test package corrections and working on improvements to test time, test coverage and reliability of the Flying Probe systems. Additionally, there is also scope within the role to develop your skills as a test engineer, working with the existing test engineering teams to diagnose faults down to component level and suggest remedial actions to ensure the high quality of our products is maintained. MBDA Bolton is a friendly and inclusive manufacturing environment, with full training provided and wealth of knowledge and benefits within the business that will enable you to thrive at MBDA. Key Responsibilities: Creation of new Flying Probe test packages: Using the SPEA 4050S2 test system, you will follow a well-documented development process, starting from an initial circuit card data-pack, through the import to Flying Probe, debugging of tests and statistical data analysis of results. This concludes with a reliable and robust test package that can be deployed to the manufacturing operations team to use. Correction and improvement of existing Flying Probe test packages: As our products evolve and updates are released, we are required to update and improve the existing test packages to accommodate any changes. Another responsibility will be improving the yield on our deployed test packages, by running statistical analysis on test results and making changes accordingly. Communication with stakeholders and cross-team working: As part of investigations and cross-team working, you will perform fault diagnosis down to component level on analogue and digital PCB assemblies using a wide range of both automated and manual test equipment including oscilloscopes, multi-meters, signal generators, etc. What we're looking for from you: A Formal technical Engineering/Craft Apprenticeship to NVQ Level 3/TR23/TR21 and a Formal further education certificate to Level 4 (HNC or equivalent in a relevant subject). OR A BEng/BSc in relevant Engineering/Technical Degree. Key Skills Expertise in Electronics Test & Diagnosis: A strong theoretical and practical understanding of electrical/electronic measurement and test principles, test equipment and fault diagnosis techniques for electronic sub-assemblies and PCBs. Engineering Documentation Experience: An ability to interpret detailed schematics, drawings and test related documentation. Experience writing operator instructions and engineering manuals is desirable but not required. Test Equipment Experience: Hands-on experience using both manual and automated test equipment, preferably within a defence or similar high-reliability manufacturing environment. Flying Probe Systems Experience and Expertise (Desired but not required): Familiarity with Flying Probe development and debugging, including guarding methods, probe allocation and development principals. Our company: Peace is not a given, Freedom is not a given, Sovereignty is not a given MBDA is a leading defence organisation. We are proud of the role we play in supporting the Armed Forces who protect our nations. We partner with governments to work together towards a common goal, defending our freedom. We are proud of our employee-led networks, examples include: Gender Equality, Pride, Menopause Matters, Parents and Carers, Armed Forces, Ethnic Diversity, Neurodiversity, Disability and more We recognise that everyone is unique, and we encourage you to speak to us should you require any advice, support or adjustments throughout our recruitment process. Follow us on LinkedIn (MBDA), X Instagram (MBDA_UK) and Glassdoor or visit our MBDA Careers website for more information.
Jun 12, 2026
Full time
Join a new small team at MBDA Bolton and become an expert in the field of Flying Probe Manufacturing Data Analysis, developing your skills and shaping the future of circuit card manufacturing in MBDA UK. Salary: Circa £45,000 depending on experience Dynamic (hybrid) working: 4-5 days per week on-site due to on-site equipment location. Security Clearance: British Citizen. Restrictions and/or limitations relating to nationality and/or rights to work may apply. As a minimum and after offer stage, all successful candidates will need to undergo HMG Basic Personnel Security Standard checks (BPSS), which are managed by the MBDA Personnel Security Team. What we can offer you: Company bonus: Up to £2,500 (based on company performance and will vary year to year) Pension: maximum total (employer and employee) contribution of up to 14% Overtime: opportunity for paid overtime Flexi Leave: Up to 15 additional days Flexible working: We welcome applicants who are looking for flexible working arrangements Enhanced parental leave: offers up to 26 weeks for maternity, adoption and shared parental leave -enhancements are available for paternity leave, neonatal leave and fertility testing and treatments Facilities: Fantastic site facilities including subsidised meals, free car parking and much more The opportunity: This is a newly developed team, working to transform the way that defects are located and corrected within Circuit Card Assembly manufacturing, utilising state-of-the-art Flying Probe test equipment to find faults fast and improve the fault investigation process for the test engineering teams. We are looking for a motivated and organised individual, who can work effectively both independently or as part of a wider team. A background in Electronic Engineering, alongside attention to detail and a methodical approach to test development are essential skills for the role. Any existing knowledge of Flying Probe systems (specifically SPEA systems) is welcomed but not essential. You will work alongside experienced manufacturing test engineers and deliver new Flying Probe test packages for the circuit cards created at MBDA's complex technologies site in Bolton. Other aspects of the job involve delivering timely test package corrections and working on improvements to test time, test coverage and reliability of the Flying Probe systems. Additionally, there is also scope within the role to develop your skills as a test engineer, working with the existing test engineering teams to diagnose faults down to component level and suggest remedial actions to ensure the high quality of our products is maintained. MBDA Bolton is a friendly and inclusive manufacturing environment, with full training provided and wealth of knowledge and benefits within the business that will enable you to thrive at MBDA. Key Responsibilities: Creation of new Flying Probe test packages: Using the SPEA 4050S2 test system, you will follow a well-documented development process, starting from an initial circuit card data-pack, through the import to Flying Probe, debugging of tests and statistical data analysis of results. This concludes with a reliable and robust test package that can be deployed to the manufacturing operations team to use. Correction and improvement of existing Flying Probe test packages: As our products evolve and updates are released, we are required to update and improve the existing test packages to accommodate any changes. Another responsibility will be improving the yield on our deployed test packages, by running statistical analysis on test results and making changes accordingly. Communication with stakeholders and cross-team working: As part of investigations and cross-team working, you will perform fault diagnosis down to component level on analogue and digital PCB assemblies using a wide range of both automated and manual test equipment including oscilloscopes, multi-meters, signal generators, etc. What we're looking for from you: A Formal technical Engineering/Craft Apprenticeship to NVQ Level 3/TR23/TR21 and a Formal further education certificate to Level 4 (HNC or equivalent in a relevant subject). OR A BEng/BSc in relevant Engineering/Technical Degree. Key Skills Expertise in Electronics Test & Diagnosis: A strong theoretical and practical understanding of electrical/electronic measurement and test principles, test equipment and fault diagnosis techniques for electronic sub-assemblies and PCBs. Engineering Documentation Experience: An ability to interpret detailed schematics, drawings and test related documentation. Experience writing operator instructions and engineering manuals is desirable but not required. Test Equipment Experience: Hands-on experience using both manual and automated test equipment, preferably within a defence or similar high-reliability manufacturing environment. Flying Probe Systems Experience and Expertise (Desired but not required): Familiarity with Flying Probe development and debugging, including guarding methods, probe allocation and development principals. Our company: Peace is not a given, Freedom is not a given, Sovereignty is not a given MBDA is a leading defence organisation. We are proud of the role we play in supporting the Armed Forces who protect our nations. We partner with governments to work together towards a common goal, defending our freedom. We are proud of our employee-led networks, examples include: Gender Equality, Pride, Menopause Matters, Parents and Carers, Armed Forces, Ethnic Diversity, Neurodiversity, Disability and more We recognise that everyone is unique, and we encourage you to speak to us should you require any advice, support or adjustments throughout our recruitment process. Follow us on LinkedIn (MBDA), X Instagram (MBDA_UK) and Glassdoor or visit our MBDA Careers website for more information.
Looking for hands-on work in a high-precision manufacturing environment? We're supporting a leading defence engineering organisation in hiring Electronics Assembly Operators to work on advanced circuit card builds. This is a great opportunity to develop specialist skills within a clean, structured production environment. What you'll be doing: Assembling and soldering components onto circuit boards Working with small components under a microscope Carrying out quality checks and identifying defects Following engineering drawings and build instructions What we're looking for: Experience in soldering or electronics assembly Strong attention to detail Comfortable working with small components What happens now? Upon submission of your application, should it meet our selection criteria, you will be contacted via e-mail by one of our talent acquisition specialists to arrange a screening call. This telephone chat is structured to explore a series of questions aimed at matching your competencies and capabilities to the specific demands of the position. Please note, this screening is contingent upon the initial success of your application. Security Clearance: British Citizen or a Dual UK national with British citizenship Restrictions and/or limitations relating to nationality and/or rights to work may apply. As a minimum and after offer stage, all successful candidates will need to undergo HMG Basic Personnel Security Standard checks (BPSS), which are managed by our clients Security Team. More about the role: For more than 70 years, our client has been in a strong partnership with the UK military. They have accomplished numerous milestones in defence engineering and have provided essential defence capabilities to meet the requirements of the armed forces across land, sea, and air. This job is at our client's site in Bolton facility, one of the North West's leading manufacturing sites for at least 25 years. The facility offers showers and bike racks and is near the motorway, with a petrol station outside. Amenities like an onsite canteen. Guidant, Carbon60, Lorien & SRG - The Impellam Group Portfolio are acting as an Employment Business in relation to this vacancy.
Jun 12, 2026
Contractor
Looking for hands-on work in a high-precision manufacturing environment? We're supporting a leading defence engineering organisation in hiring Electronics Assembly Operators to work on advanced circuit card builds. This is a great opportunity to develop specialist skills within a clean, structured production environment. What you'll be doing: Assembling and soldering components onto circuit boards Working with small components under a microscope Carrying out quality checks and identifying defects Following engineering drawings and build instructions What we're looking for: Experience in soldering or electronics assembly Strong attention to detail Comfortable working with small components What happens now? Upon submission of your application, should it meet our selection criteria, you will be contacted via e-mail by one of our talent acquisition specialists to arrange a screening call. This telephone chat is structured to explore a series of questions aimed at matching your competencies and capabilities to the specific demands of the position. Please note, this screening is contingent upon the initial success of your application. Security Clearance: British Citizen or a Dual UK national with British citizenship Restrictions and/or limitations relating to nationality and/or rights to work may apply. As a minimum and after offer stage, all successful candidates will need to undergo HMG Basic Personnel Security Standard checks (BPSS), which are managed by our clients Security Team. More about the role: For more than 70 years, our client has been in a strong partnership with the UK military. They have accomplished numerous milestones in defence engineering and have provided essential defence capabilities to meet the requirements of the armed forces across land, sea, and air. This job is at our client's site in Bolton facility, one of the North West's leading manufacturing sites for at least 25 years. The facility offers showers and bike racks and is near the motorway, with a petrol station outside. Amenities like an onsite canteen. Guidant, Carbon60, Lorien & SRG - The Impellam Group Portfolio are acting as an Employment Business in relation to this vacancy.
Electus Recruitment Solutions
Stevenage, Hertfordshire
Summary Take ownership of how complex electronic systems are tested as they move from development into production. This is an opportunity to influence test strategy, solve challenging technical problems and broaden your impact across the full product lifecycle within the defence sector. Location and setup Hybrid working in Hertfordshire, with regular on-site attendance required due to the nature of the work. What you will be doing Support the introduction of new test systems and facilities from development through to production readiness Diagnose and resolve electrical and electronic test issues at system, sub-assembly and circuit card level Develop test specifications, operator instructions and supporting technical documentation Work closely with engineering, manufacturing and operational teams to overcome technical challenges Contribute to production readiness activities and ensure appropriate configuration control is maintained Provide technical guidance and mentoring to less experienced engineers Skills and background HNC, HND, degree or equivalent qualification in a relevant engineering discipline Significant experience in electronics manufacture, test and fault finding Strong understanding of electrical, electronic and RF measurement principles Experience supporting product development lifecycles within a manufacturing environment Ability to prioritise multiple technical activities and deliver against project objectives Strong written and verbal communication skills with experience producing technical reports and instructions Essential requirements Able to obtain and maintain Developed Vetting (DV) security clearance Strong background in electronic test engineering covering digital, analogue and RF technologies Experience supporting products through development and manufacturing environments Proven capability with manual and automated test systems Able to produce technical documentation and communicate effectively with technical stakeholders Salary and rewards Circa 52,000 depending on experience, with added benefits, including: Annual performance related bonus opportunity Paid overtime opportunities where workload requires it Flexible working arrangements to support work life balance Enhanced family leave policies including parental, adoption and related support provisions Equal opportunities Our client is committed to creating an inclusive working environment and welcomes applications from suitably qualified individuals from all backgrounds. Reasonable adjustments can be discussed throughout the recruitment process where required. These vacancies require eligibility to obtain DV clearance. Applicants must be able to obtain and maintain relevant clearance. Electus Recruitment Solutions provides specialist engineering and technical recruitment solutions to high-technology industries. Thank you for your interest. If you do not hear from us within seven working days, please presume your application has been unsuccessful on this occasion. You may resubmit your CV or details in the future, and we shall assess your suitability then.
Jun 10, 2026
Full time
Summary Take ownership of how complex electronic systems are tested as they move from development into production. This is an opportunity to influence test strategy, solve challenging technical problems and broaden your impact across the full product lifecycle within the defence sector. Location and setup Hybrid working in Hertfordshire, with regular on-site attendance required due to the nature of the work. What you will be doing Support the introduction of new test systems and facilities from development through to production readiness Diagnose and resolve electrical and electronic test issues at system, sub-assembly and circuit card level Develop test specifications, operator instructions and supporting technical documentation Work closely with engineering, manufacturing and operational teams to overcome technical challenges Contribute to production readiness activities and ensure appropriate configuration control is maintained Provide technical guidance and mentoring to less experienced engineers Skills and background HNC, HND, degree or equivalent qualification in a relevant engineering discipline Significant experience in electronics manufacture, test and fault finding Strong understanding of electrical, electronic and RF measurement principles Experience supporting product development lifecycles within a manufacturing environment Ability to prioritise multiple technical activities and deliver against project objectives Strong written and verbal communication skills with experience producing technical reports and instructions Essential requirements Able to obtain and maintain Developed Vetting (DV) security clearance Strong background in electronic test engineering covering digital, analogue and RF technologies Experience supporting products through development and manufacturing environments Proven capability with manual and automated test systems Able to produce technical documentation and communicate effectively with technical stakeholders Salary and rewards Circa 52,000 depending on experience, with added benefits, including: Annual performance related bonus opportunity Paid overtime opportunities where workload requires it Flexible working arrangements to support work life balance Enhanced family leave policies including parental, adoption and related support provisions Equal opportunities Our client is committed to creating an inclusive working environment and welcomes applications from suitably qualified individuals from all backgrounds. Reasonable adjustments can be discussed throughout the recruitment process where required. These vacancies require eligibility to obtain DV clearance. Applicants must be able to obtain and maintain relevant clearance. Electus Recruitment Solutions provides specialist engineering and technical recruitment solutions to high-technology industries. Thank you for your interest. If you do not hear from us within seven working days, please presume your application has been unsuccessful on this occasion. You may resubmit your CV or details in the future, and we shall assess your suitability then.
Our client, a large Aerospace and Defence supplier is looking for a Manufacturing Engineer to join them on a contract basis at their site in Luton. Due to the nature of the role, applicants must hold the sole British nationality and be willing to undergo SC Clearance ahead of starting. 12 month initial contract. 46.15 p/h Umbrella, inside IR35 Based onsite in Luton. As a Senior Manufacturing Engineer, you will be responsible for the smooth transition of our new products from design into manufacture and will lead the front-end manufacturing engineering activities, from providing DfX input into the design (i.e. design for manufacturing, assembly and test), to solving production capability issues. Your technical and project management skills will help to ensure that new products are introduced into operations in a timely, efficient, cost effective and accurate manner. You will join our team in the following activities: Developing manufacturing processes by studying product requirements; researching, designing, modifying, and testing manufacturing methods and equipment; understanding feedback from operators, conferring with equipment vendors or external suppliers Participating and supporting Manufacturing Maturity Reviews, maintaining governance through the Lifecycle Management process and creating/contributing to Manufacturing Plans Providing manufacturing decision-making information to aid the: review of production schedules; reviewing production labour and material costs; estimating future requirements preparation of product and process reports by collecting, analysing, and summarising information and trends Building prototype products, writing work instructions and training manufacturing staff Resolving routine, and some complex, product and/or production issues and constraints (relieving bottlenecks) on the shop floor, reacting efficiently to escalation from manufacturing teams Improving manufacturing efficiency by participating in capacity analysis, simulation planning workflow, space requirements, and equipment/process layout TECHNICAL SKILLS Must Have Ability to articulate and explain technical understanding Ability to influence and negotiate with others using data and analysis to support line of reasoning Ability to take ownership of a work package; planning and scheduling own workload Been involved in capability and / or process development Confidence and ability to challenge / respond to technical / process issues Demonstrated knowledge of more than one phase of the Product Life Cycle and the associated discipline processes Excellent practical knowledge of manufacturing processes and principles Pro-active, 'can do' attitude with good problem-solving and data analysis skills Nice To Have An operational understanding of project work and how the work of the team impacts upon other project activities An understanding of cross functional / commercial business processes and their own impact Demonstrated knowledge and experience of multiple phases of the Product Life Cycle and the associated processes Educated to HND or Degree level in a relevant Engineering discipline, e.g. Manufacturing, Process, Electronics, Mechanical
Jun 08, 2026
Contractor
Our client, a large Aerospace and Defence supplier is looking for a Manufacturing Engineer to join them on a contract basis at their site in Luton. Due to the nature of the role, applicants must hold the sole British nationality and be willing to undergo SC Clearance ahead of starting. 12 month initial contract. 46.15 p/h Umbrella, inside IR35 Based onsite in Luton. As a Senior Manufacturing Engineer, you will be responsible for the smooth transition of our new products from design into manufacture and will lead the front-end manufacturing engineering activities, from providing DfX input into the design (i.e. design for manufacturing, assembly and test), to solving production capability issues. Your technical and project management skills will help to ensure that new products are introduced into operations in a timely, efficient, cost effective and accurate manner. You will join our team in the following activities: Developing manufacturing processes by studying product requirements; researching, designing, modifying, and testing manufacturing methods and equipment; understanding feedback from operators, conferring with equipment vendors or external suppliers Participating and supporting Manufacturing Maturity Reviews, maintaining governance through the Lifecycle Management process and creating/contributing to Manufacturing Plans Providing manufacturing decision-making information to aid the: review of production schedules; reviewing production labour and material costs; estimating future requirements preparation of product and process reports by collecting, analysing, and summarising information and trends Building prototype products, writing work instructions and training manufacturing staff Resolving routine, and some complex, product and/or production issues and constraints (relieving bottlenecks) on the shop floor, reacting efficiently to escalation from manufacturing teams Improving manufacturing efficiency by participating in capacity analysis, simulation planning workflow, space requirements, and equipment/process layout TECHNICAL SKILLS Must Have Ability to articulate and explain technical understanding Ability to influence and negotiate with others using data and analysis to support line of reasoning Ability to take ownership of a work package; planning and scheduling own workload Been involved in capability and / or process development Confidence and ability to challenge / respond to technical / process issues Demonstrated knowledge of more than one phase of the Product Life Cycle and the associated discipline processes Excellent practical knowledge of manufacturing processes and principles Pro-active, 'can do' attitude with good problem-solving and data analysis skills Nice To Have An operational understanding of project work and how the work of the team impacts upon other project activities An understanding of cross functional / commercial business processes and their own impact Demonstrated knowledge and experience of multiple phases of the Product Life Cycle and the associated processes Educated to HND or Degree level in a relevant Engineering discipline, e.g. Manufacturing, Process, Electronics, Mechanical
Production Operator - Electronics Assembly (Soldering Experience preferred) Newtownabbey, Belfast £12.65 per hour, weekly Paid (Overtime available) Are you a hands-on, detail-oriented individual with a passion for precision and quality? Do you have experience with soldering and a background in production or electronics assembly? If so, we want to hear from you!We are currently recruiting for a skilled Production Operator to join a forward-thinking electronics manufacturing team based in Newtownabbey, Belfast . - This is an on-going temporary role with the chance to go perm for the right candidate.This is an excellent opportunity to work across a variety of innovative projects in a modern, fast-paced environment where your skills will truly make an impact. What You'll Be Doing: Operating production machinery to assemble electronic products Assembling cable looms and mechanical components with precision Performing soldering tasks and working with PCB assemblies Copying and installing software as part of the production process Kit preparation and packaging of completed units Meeting daily/weekly output targets and maintaining quality standards Participating in LEAN manufacturing initiatives Ensuring your workstation remains clean, organised, and safe Supporting a wide range of projects across various product lines What We're Looking For: Soldering experience is essential Previous experience in a production or manufacturing setting Knowledge of electronic components and working with PCBAs Strong manual dexterity and attention to detail Ability to follow work instructions and adhere to processes Comfortable multitasking in a busy, team-oriented environment Basic computer literacy (ECDL or equivalent desirable) Why Apply? Join a collaborative and supportive production team Be part of an exciting and fast-growing manufacturing environment Competitive hourly rate with weekly pay Opportunities for learning and professional development Working Hours: Monday - Thursday, 7:25am - 16:55pm Pay Rate: £12.65 per hour (Weekly Paid) Brook Street NMR is acting as an Employment Business in relation to this vacancy.
Oct 07, 2025
Full time
Production Operator - Electronics Assembly (Soldering Experience preferred) Newtownabbey, Belfast £12.65 per hour, weekly Paid (Overtime available) Are you a hands-on, detail-oriented individual with a passion for precision and quality? Do you have experience with soldering and a background in production or electronics assembly? If so, we want to hear from you!We are currently recruiting for a skilled Production Operator to join a forward-thinking electronics manufacturing team based in Newtownabbey, Belfast . - This is an on-going temporary role with the chance to go perm for the right candidate.This is an excellent opportunity to work across a variety of innovative projects in a modern, fast-paced environment where your skills will truly make an impact. What You'll Be Doing: Operating production machinery to assemble electronic products Assembling cable looms and mechanical components with precision Performing soldering tasks and working with PCB assemblies Copying and installing software as part of the production process Kit preparation and packaging of completed units Meeting daily/weekly output targets and maintaining quality standards Participating in LEAN manufacturing initiatives Ensuring your workstation remains clean, organised, and safe Supporting a wide range of projects across various product lines What We're Looking For: Soldering experience is essential Previous experience in a production or manufacturing setting Knowledge of electronic components and working with PCBAs Strong manual dexterity and attention to detail Ability to follow work instructions and adhere to processes Comfortable multitasking in a busy, team-oriented environment Basic computer literacy (ECDL or equivalent desirable) Why Apply? Join a collaborative and supportive production team Be part of an exciting and fast-growing manufacturing environment Competitive hourly rate with weekly pay Opportunities for learning and professional development Working Hours: Monday - Thursday, 7:25am - 16:55pm Pay Rate: £12.65 per hour (Weekly Paid) Brook Street NMR is acting as an Employment Business in relation to this vacancy.
Surface Mount Technician- Waterlooville Are you skilled in operating and maintaining SMT equipment? Are you adept at working with fine pitch components? Our client, an organisation specialising in electronics manufacturing, is seeking a Surface Mount Technician to join their team. This is a temporary-to-permanent role with negotiable salary, offering an exciting opportunity for the right candidate. Main Responsibilities: Operate and maintain SMT Pick & Place machines, ensuring adherence to strict health and safety guidelines. Use screen-printing machines for efficient operations. Programme and set up P&P machines for optimal performance. Programme and maintain reflow ovens. Perform PCB assembly, including SMT and PTH soldering. Carry out cable assembly using crimp tools. Engage in electromechanical assembly. Work from customer BOM's and drawings to ensure manufacturing meets required standards. Conduct PCBA rework as needed. Experience / Skills / Qualifications: Essential ability to operate Pick & Place machines. Off-line programming experience with P&P machines (Juki etc.). Strong problem-solving and diagnostic skills. Excellent component recognition and knowledge. Ability to thrive in a high-pressure environment. The working hours for this role are Monday to Friday, from 08:00 to 16:00. Our client values its employees and provides a collaborative and supportive work environment. They offer competitive compensation that is commensurate with experience. If you believe you have the necessary skills and enthusiasm to excel in this role, we would love to hear from you. Join our client's team as a Surface Mount Technician and take the next step in your career. Apply today! Adecco is a disability-confident employer. It is important to us that we run an inclusive and accessible recruitment process to support candidates of all backgrounds and all abilities to apply. Adecco is committed to building a supportive environment for you to explore the next steps in your career. If you require reasonable adjustments at any stage, please let us know and we will be happy to support you. Adecco acts as an employment agency for permanent recruitment and an employment business for the supply of temporary workers. The Adecco Group UK & Ireland is an Equal Opportunities Employer. By applying for this role your details will be submitted to Adecco. Our Candidate Privacy Information Statement explaining how we will use your information is available on our website.
Oct 07, 2025
Seasonal
Surface Mount Technician- Waterlooville Are you skilled in operating and maintaining SMT equipment? Are you adept at working with fine pitch components? Our client, an organisation specialising in electronics manufacturing, is seeking a Surface Mount Technician to join their team. This is a temporary-to-permanent role with negotiable salary, offering an exciting opportunity for the right candidate. Main Responsibilities: Operate and maintain SMT Pick & Place machines, ensuring adherence to strict health and safety guidelines. Use screen-printing machines for efficient operations. Programme and set up P&P machines for optimal performance. Programme and maintain reflow ovens. Perform PCB assembly, including SMT and PTH soldering. Carry out cable assembly using crimp tools. Engage in electromechanical assembly. Work from customer BOM's and drawings to ensure manufacturing meets required standards. Conduct PCBA rework as needed. Experience / Skills / Qualifications: Essential ability to operate Pick & Place machines. Off-line programming experience with P&P machines (Juki etc.). Strong problem-solving and diagnostic skills. Excellent component recognition and knowledge. Ability to thrive in a high-pressure environment. The working hours for this role are Monday to Friday, from 08:00 to 16:00. Our client values its employees and provides a collaborative and supportive work environment. They offer competitive compensation that is commensurate with experience. If you believe you have the necessary skills and enthusiasm to excel in this role, we would love to hear from you. Join our client's team as a Surface Mount Technician and take the next step in your career. Apply today! Adecco is a disability-confident employer. It is important to us that we run an inclusive and accessible recruitment process to support candidates of all backgrounds and all abilities to apply. Adecco is committed to building a supportive environment for you to explore the next steps in your career. If you require reasonable adjustments at any stage, please let us know and we will be happy to support you. Adecco acts as an employment agency for permanent recruitment and an employment business for the supply of temporary workers. The Adecco Group UK & Ireland is an Equal Opportunities Employer. By applying for this role your details will be submitted to Adecco. Our Candidate Privacy Information Statement explaining how we will use your information is available on our website.
Production Operator - Electronics Assembly (Soldering Experience preferred) Newtownabbey, Belfast 12.65 per hour, weekly Paid (Overtime available) Are you a hands-on, detail-oriented individual with a passion for precision and quality? Do you have experience with soldering and a background in production or electronics assembly? If so, we want to hear from you! We are currently recruiting for a skilled Production Operator to join a forward-thinking electronics manufacturing team based in Newtownabbey, Belfast . - This is an on-going temporary role with the chance to go perm for the right candidate. This is an excellent opportunity to work across a variety of innovative projects in a modern, fast-paced environment where your skills will truly make an impact. What You'll Be Doing: Operating production machinery to assemble electronic products Assembling cable looms and mechanical components with precision Performing soldering tasks and working with PCB assemblies Copying and installing software as part of the production process Kit preparation and packaging of completed units Meeting daily/weekly output targets and maintaining quality standards Participating in LEAN manufacturing initiatives Ensuring your workstation remains clean, organised, and safe Supporting a wide range of projects across various product lines What We're Looking For: Soldering experience is essential Previous experience in a production or manufacturing setting Knowledge of electronic components and working with PCBAs Strong manual dexterity and attention to detail Ability to follow work instructions and adhere to processes Comfortable multitasking in a busy, team-oriented environment Basic computer literacy (ECDL or equivalent desirable) Why Apply? Join a collaborative and supportive production team Be part of an exciting and fast-growing manufacturing environment Competitive hourly rate with weekly pay Opportunities for learning and professional development Working Hours: Monday - Thursday, 7:25am - 16:55pm Pay Rate: 12.65 per hour (Weekly Paid) Brook Street NMR is acting as an Employment Business in relation to this vacancy.
Oct 07, 2025
Seasonal
Production Operator - Electronics Assembly (Soldering Experience preferred) Newtownabbey, Belfast 12.65 per hour, weekly Paid (Overtime available) Are you a hands-on, detail-oriented individual with a passion for precision and quality? Do you have experience with soldering and a background in production or electronics assembly? If so, we want to hear from you! We are currently recruiting for a skilled Production Operator to join a forward-thinking electronics manufacturing team based in Newtownabbey, Belfast . - This is an on-going temporary role with the chance to go perm for the right candidate. This is an excellent opportunity to work across a variety of innovative projects in a modern, fast-paced environment where your skills will truly make an impact. What You'll Be Doing: Operating production machinery to assemble electronic products Assembling cable looms and mechanical components with precision Performing soldering tasks and working with PCB assemblies Copying and installing software as part of the production process Kit preparation and packaging of completed units Meeting daily/weekly output targets and maintaining quality standards Participating in LEAN manufacturing initiatives Ensuring your workstation remains clean, organised, and safe Supporting a wide range of projects across various product lines What We're Looking For: Soldering experience is essential Previous experience in a production or manufacturing setting Knowledge of electronic components and working with PCBAs Strong manual dexterity and attention to detail Ability to follow work instructions and adhere to processes Comfortable multitasking in a busy, team-oriented environment Basic computer literacy (ECDL or equivalent desirable) Why Apply? Join a collaborative and supportive production team Be part of an exciting and fast-growing manufacturing environment Competitive hourly rate with weekly pay Opportunities for learning and professional development Working Hours: Monday - Thursday, 7:25am - 16:55pm Pay Rate: 12.65 per hour (Weekly Paid) Brook Street NMR is acting as an Employment Business in relation to this vacancy.
Production Operator - Electronics Assembly (Soldering Experience preferred) Newtownabbey, Belfast £12.65 per hour, weekly Paid (Overtime available) Are you a hands-on, detail-oriented individual with a passion for precision and quality? Do you have experience with soldering and a background in production or electronics assembly? If so, we want to hear from you!We are currently recruiting for a skilled Production Operator to join a forward-thinking electronics manufacturing team based in Newtownabbey, Belfast . - This is an on-going temporary role with the chance to go perm for the right candidate. This is an excellent opportunity to work across a variety of innovative projects in a modern, fast-paced environment where your skills will truly make an impact. What You'll Be Doing: Operating production machinery to assemble electronic products Assembling cable looms and mechanical components with precision Performing soldering tasks and working with PCB assemblies Copying and installing software as part of the production process Kit preparation and packaging of completed units Meeting daily/weekly output targets and maintaining quality standards Participating in LEAN manufacturing initiatives Ensuring your workstation remains clean, organised, and safe Supporting a wide range of projects across various product lines What We're Looking For: Soldering experience is essential Previous experience in a production or manufacturing setting Knowledge of electronic components and working with PCBAs Strong manual dexterity and attention to detail Ability to follow work instructions and adhere to processes Comfortable multitasking in a busy, team-oriented environment Basic computer literacy (ECDL or equivalent desirable) Why Apply? Join a collaborative and supportive production team Be part of an exciting and fast-growing manufacturing environment Competitive hourly rate with weekly pay Opportunities for learning and professional development Working Hours: Monday - Thursday, 7:25am - 16:55pm Pay Rate: £12.65 per hour (Weekly Paid) Brook Street NMR is acting as an Employment Business in relation to this vacancy.
Oct 06, 2025
Full time
Production Operator - Electronics Assembly (Soldering Experience preferred) Newtownabbey, Belfast £12.65 per hour, weekly Paid (Overtime available) Are you a hands-on, detail-oriented individual with a passion for precision and quality? Do you have experience with soldering and a background in production or electronics assembly? If so, we want to hear from you!We are currently recruiting for a skilled Production Operator to join a forward-thinking electronics manufacturing team based in Newtownabbey, Belfast . - This is an on-going temporary role with the chance to go perm for the right candidate. This is an excellent opportunity to work across a variety of innovative projects in a modern, fast-paced environment where your skills will truly make an impact. What You'll Be Doing: Operating production machinery to assemble electronic products Assembling cable looms and mechanical components with precision Performing soldering tasks and working with PCB assemblies Copying and installing software as part of the production process Kit preparation and packaging of completed units Meeting daily/weekly output targets and maintaining quality standards Participating in LEAN manufacturing initiatives Ensuring your workstation remains clean, organised, and safe Supporting a wide range of projects across various product lines What We're Looking For: Soldering experience is essential Previous experience in a production or manufacturing setting Knowledge of electronic components and working with PCBAs Strong manual dexterity and attention to detail Ability to follow work instructions and adhere to processes Comfortable multitasking in a busy, team-oriented environment Basic computer literacy (ECDL or equivalent desirable) Why Apply? Join a collaborative and supportive production team Be part of an exciting and fast-growing manufacturing environment Competitive hourly rate with weekly pay Opportunities for learning and professional development Working Hours: Monday - Thursday, 7:25am - 16:55pm Pay Rate: £12.65 per hour (Weekly Paid) Brook Street NMR is acting as an Employment Business in relation to this vacancy.
Production Operator - Electronics Assembly (Soldering Experience preferred) Newtownabbey, Belfast £12.65 per hour, weekly Paid (Overtime available) Are you a hands-on, detail-oriented individual with a passion for precision and quality? Do you have experience with soldering and a background in production or electronics assembly? If so, we want to hear from you!We are currently recruiting for a skilled Production Operator to join a forward-thinking electronics manufacturing team based in Newtownabbey, Belfast . - This is an on-going temporary role with the chance to go perm for the right candidate. This is an excellent opportunity to work across a variety of innovative projects in a modern, fast-paced environment where your skills will truly make an impact. What You'll Be Doing: Operating production machinery to assemble electronic products Assembling cable looms and mechanical components with precision Performing soldering tasks and working with PCB assemblies Copying and installing software as part of the production process Kit preparation and packaging of completed units Meeting daily/weekly output targets and maintaining quality standards Participating in LEAN manufacturing initiatives Ensuring your workstation remains clean, organised, and safe Supporting a wide range of projects across various product lines What We're Looking For: Soldering experience is essential Previous experience in a production or manufacturing setting Knowledge of electronic components and working with PCBAs Strong manual dexterity and attention to detail Ability to follow work instructions and adhere to processes Comfortable multitasking in a busy, team-oriented environment Basic computer literacy (ECDL or equivalent desirable) Why Apply? Join a collaborative and supportive production team Be part of an exciting and fast-growing manufacturing environment Competitive hourly rate with weekly pay Opportunities for learning and professional development Working Hours: Monday - Thursday, 7:25am - 16:55pm Pay Rate: £12.65 per hour (Weekly Paid) Brook Street NMR is acting as an Employment Business in relation to this vacancy.
Oct 01, 2025
Full time
Production Operator - Electronics Assembly (Soldering Experience preferred) Newtownabbey, Belfast £12.65 per hour, weekly Paid (Overtime available) Are you a hands-on, detail-oriented individual with a passion for precision and quality? Do you have experience with soldering and a background in production or electronics assembly? If so, we want to hear from you!We are currently recruiting for a skilled Production Operator to join a forward-thinking electronics manufacturing team based in Newtownabbey, Belfast . - This is an on-going temporary role with the chance to go perm for the right candidate. This is an excellent opportunity to work across a variety of innovative projects in a modern, fast-paced environment where your skills will truly make an impact. What You'll Be Doing: Operating production machinery to assemble electronic products Assembling cable looms and mechanical components with precision Performing soldering tasks and working with PCB assemblies Copying and installing software as part of the production process Kit preparation and packaging of completed units Meeting daily/weekly output targets and maintaining quality standards Participating in LEAN manufacturing initiatives Ensuring your workstation remains clean, organised, and safe Supporting a wide range of projects across various product lines What We're Looking For: Soldering experience is essential Previous experience in a production or manufacturing setting Knowledge of electronic components and working with PCBAs Strong manual dexterity and attention to detail Ability to follow work instructions and adhere to processes Comfortable multitasking in a busy, team-oriented environment Basic computer literacy (ECDL or equivalent desirable) Why Apply? Join a collaborative and supportive production team Be part of an exciting and fast-growing manufacturing environment Competitive hourly rate with weekly pay Opportunities for learning and professional development Working Hours: Monday - Thursday, 7:25am - 16:55pm Pay Rate: £12.65 per hour (Weekly Paid) Brook Street NMR is acting as an Employment Business in relation to this vacancy.
Looking for a hands-on part-time engineering role with variety, flexibility, and great benefits? Join Weald Electronics in Slinfold as a Mechanical Engineer / QC Inspector today! Mechanical EngineerSlinfold, West Sussex 23 - 24.75 hours per week over three days £14 - £14.75 per hour Permanent contract Please Note: Applicants must be authorised to work in the UK Weald Electronics Ltd, part of The Lodge Group, is a trusted manufacturer of high-performance connectors and electro-mechanical assemblies. Known for quality, innovation, and reliability, we support industries where precision is critical. With a supportive culture and opportunities to grow, this is an exciting time to join our dedicated team. The Role We're looking for a skilled Mechanical Engineer / QC Inspector to support our Production, Engineering, and Quality departments. The role is varied, offering plenty of hands-on tasks while also playing a vital role in inspection and quality assurance. Key Responsibilities: Maintain and repair assembly jigs and small tools Manufacture and adapt simple tooling for production Carry out small batch modifications using lathes, drills, milling machines, and hand tools Prototype new parts for testing and evaluation Support the QA department with timely and accurate inspection of sub-assemblies and incoming goods Record inspection results and complete non-conformance reports when required Provide feedback to the Quality Manager to support continuous improvement Operate at all times to company's quality and health & safety standards Benefits: Competitive hourly rate: £14.00 - £14.75 (depending on experience) Contributory pension scheme 23 days holiday + bank holidays (pro rata) Holiday entitlement increases with service (up to 25 days) Paid Christmas closure 2x discretionary annual bonuses (June & December) Employee assistance programme with 24/7 helpline, wellbeing app & discounts Free onsite parking The Ideal Candidate We're looking for a practical engineer with a strong mechanical background and a proactive, adaptable approach. You'll be someone who takes pride in accuracy and can balance both production and quality tasks. About you: Due to the location of this role, applicants must have a valid driving licence and access to their own vehicle Able to interpret technical drawings Previous hands-on experience in machining, toolmaking, or precision engineering Skilled in the use of lathes, drills, mills, and other workshop tools Familiar with mechanical and optical measuring equipment High attention to detail and accuracy Flexible, adaptable, and keen to learn new skills Basic IT skills This is a fantastic opportunity to join a stable, friendly company where you'll receive a full handover before the current post-holder retires. How to apply for the role: If you have the skills and experience required for this position, click "apply" today and check your inbox for an email providing more information on how to complete your application and provide any other supporting documents. You must be authorised to work in the UK. No agencies please. Other suitable skills and experience include Mechanical Technician, Quality Inspector, Toolmaker, Maintenance Engineer, Machinist, CNC Operator, Production Engineer, Mechanical Assembler, Quality Engineer, Fitter/Turner
Sep 26, 2025
Full time
Looking for a hands-on part-time engineering role with variety, flexibility, and great benefits? Join Weald Electronics in Slinfold as a Mechanical Engineer / QC Inspector today! Mechanical EngineerSlinfold, West Sussex 23 - 24.75 hours per week over three days £14 - £14.75 per hour Permanent contract Please Note: Applicants must be authorised to work in the UK Weald Electronics Ltd, part of The Lodge Group, is a trusted manufacturer of high-performance connectors and electro-mechanical assemblies. Known for quality, innovation, and reliability, we support industries where precision is critical. With a supportive culture and opportunities to grow, this is an exciting time to join our dedicated team. The Role We're looking for a skilled Mechanical Engineer / QC Inspector to support our Production, Engineering, and Quality departments. The role is varied, offering plenty of hands-on tasks while also playing a vital role in inspection and quality assurance. Key Responsibilities: Maintain and repair assembly jigs and small tools Manufacture and adapt simple tooling for production Carry out small batch modifications using lathes, drills, milling machines, and hand tools Prototype new parts for testing and evaluation Support the QA department with timely and accurate inspection of sub-assemblies and incoming goods Record inspection results and complete non-conformance reports when required Provide feedback to the Quality Manager to support continuous improvement Operate at all times to company's quality and health & safety standards Benefits: Competitive hourly rate: £14.00 - £14.75 (depending on experience) Contributory pension scheme 23 days holiday + bank holidays (pro rata) Holiday entitlement increases with service (up to 25 days) Paid Christmas closure 2x discretionary annual bonuses (June & December) Employee assistance programme with 24/7 helpline, wellbeing app & discounts Free onsite parking The Ideal Candidate We're looking for a practical engineer with a strong mechanical background and a proactive, adaptable approach. You'll be someone who takes pride in accuracy and can balance both production and quality tasks. About you: Due to the location of this role, applicants must have a valid driving licence and access to their own vehicle Able to interpret technical drawings Previous hands-on experience in machining, toolmaking, or precision engineering Skilled in the use of lathes, drills, mills, and other workshop tools Familiar with mechanical and optical measuring equipment High attention to detail and accuracy Flexible, adaptable, and keen to learn new skills Basic IT skills This is a fantastic opportunity to join a stable, friendly company where you'll receive a full handover before the current post-holder retires. How to apply for the role: If you have the skills and experience required for this position, click "apply" today and check your inbox for an email providing more information on how to complete your application and provide any other supporting documents. You must be authorised to work in the UK. No agencies please. Other suitable skills and experience include Mechanical Technician, Quality Inspector, Toolmaker, Maintenance Engineer, Machinist, CNC Operator, Production Engineer, Mechanical Assembler, Quality Engineer, Fitter/Turner
