Job Title: Production Technician (Sprayer) Location: Rochester - Onsite Salary: Circa £32,773 dependent on experience Who we are: Join BAE Systems and you'll be part of something bigger. As a valued member of our global colleague network, you'll bring your unique skills and perspectives to help pioneer progress and protect what matters most. You'll be trusted to play your part in delivering the advanced, technology-led defence, aerospace and security solutions of tomorrow, shaping a safer future, for all of us. From the depths of the ocean, to the far reaches of space, there's no limit to where a career at BAE Systems could take you. What you'll be doing: In this role, you prepare surfaces for coating by removing grease, dirt, and contaminants to ensure proper adhesion of spray paint or conformal coatings. You mix paints and chemicals to meet customer specifications, following correct methods and safety regulations. Before work begins, you set up spray equipment, materials, and purpose built spray booths, then operate the spraying systems safely and accurately to achieve high quality finishes on manufactured products. You carry out quality checks using appropriate tools and techniques, addressing any defects through touch up work. The role also includes cleaning and maintaining equipment after use and upholding housekeeping standards to keep the paint and conformal coating areas clean, safe, and compliant for all personnel. Core duties: You will have experience in paint spraying and /or Conformal coating environments You will have the ability to closely follow written instructions and keep records for audit purposes. You will be able to follow strict safety requirements associated with the storage and use of hazardous materials and the disposal of hazardous material waste You will also be able to wear protective clothing including air-fed masks. Please note that protective clothing, masks, gloves and goggles must be worn when handling hazardous materials and spraying The Team: The team is responsible for spray painting Head Up Display (HUD) units, Flight Control Sticks, Fast Jet Throttle controls and other similar type -high technology products. On the conformal coating side, you will be spraying a humiseal coating onto printed circuit boards that are eventually assembled into the aforementioned products. Why BAE Systems? Here you'll build a career with purpose and limitless possibilities. With lifelong learning and meaningful work, this is a place where you can grow your career with confidence and be empowered to be your best. You'll be recognised for your contribution and enjoy rewards tailored to what's most important to you and your family, support for your financial and personal wellbeing, as well as a balanced lifestyle. In an environment embracing sustainable ways of working and with a strong sense of shared purpose, our supportive culture is a place you can feel you belong and proud of the difference you make. A place where everyone can thrive: We're committed to building an inclusive workplace where everyone feels valued and supported. We know that a diversity of backgrounds, perspectives and experiences strengthens our teams and is vital to the work we do. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role, to allow for meaningful security vetting checks. Closing Date: 29th June 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role. Therefore, if you are interested, please submit your application as early as possible.
Jun 16, 2026
Full time
Job Title: Production Technician (Sprayer) Location: Rochester - Onsite Salary: Circa £32,773 dependent on experience Who we are: Join BAE Systems and you'll be part of something bigger. As a valued member of our global colleague network, you'll bring your unique skills and perspectives to help pioneer progress and protect what matters most. You'll be trusted to play your part in delivering the advanced, technology-led defence, aerospace and security solutions of tomorrow, shaping a safer future, for all of us. From the depths of the ocean, to the far reaches of space, there's no limit to where a career at BAE Systems could take you. What you'll be doing: In this role, you prepare surfaces for coating by removing grease, dirt, and contaminants to ensure proper adhesion of spray paint or conformal coatings. You mix paints and chemicals to meet customer specifications, following correct methods and safety regulations. Before work begins, you set up spray equipment, materials, and purpose built spray booths, then operate the spraying systems safely and accurately to achieve high quality finishes on manufactured products. You carry out quality checks using appropriate tools and techniques, addressing any defects through touch up work. The role also includes cleaning and maintaining equipment after use and upholding housekeeping standards to keep the paint and conformal coating areas clean, safe, and compliant for all personnel. Core duties: You will have experience in paint spraying and /or Conformal coating environments You will have the ability to closely follow written instructions and keep records for audit purposes. You will be able to follow strict safety requirements associated with the storage and use of hazardous materials and the disposal of hazardous material waste You will also be able to wear protective clothing including air-fed masks. Please note that protective clothing, masks, gloves and goggles must be worn when handling hazardous materials and spraying The Team: The team is responsible for spray painting Head Up Display (HUD) units, Flight Control Sticks, Fast Jet Throttle controls and other similar type -high technology products. On the conformal coating side, you will be spraying a humiseal coating onto printed circuit boards that are eventually assembled into the aforementioned products. Why BAE Systems? Here you'll build a career with purpose and limitless possibilities. With lifelong learning and meaningful work, this is a place where you can grow your career with confidence and be empowered to be your best. You'll be recognised for your contribution and enjoy rewards tailored to what's most important to you and your family, support for your financial and personal wellbeing, as well as a balanced lifestyle. In an environment embracing sustainable ways of working and with a strong sense of shared purpose, our supportive culture is a place you can feel you belong and proud of the difference you make. A place where everyone can thrive: We're committed to building an inclusive workplace where everyone feels valued and supported. We know that a diversity of backgrounds, perspectives and experiences strengthens our teams and is vital to the work we do. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role, to allow for meaningful security vetting checks. Closing Date: 29th June 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role. Therefore, if you are interested, please submit your application as early as possible.
Job Title: Production Technician (Sprayer) Location: Rochester - Onsite Salary: Circa £32,773 dependent on experience Who we are: Join BAE Systems and you'll be part of something bigger. As a valued member of our global colleague network, you'll bring your unique skills and perspectives to help pioneer progress and protect what matters most. You'll be trusted to play your part in delivering the advanced, technology-led defence, aerospace and security solutions of tomorrow, shaping a safer future, for all of us. From the depths of the ocean, to the far reaches of space, there's no limit to where a career at BAE Systems could take you. What you'll be doing: In this role, you prepare surfaces for coating by removing grease, dirt, and contaminants to ensure proper adhesion of spray paint or conformal coatings. You mix paints and chemicals to meet customer specifications, following correct methods and safety regulations. Before work begins, you set up spray equipment, materials, and purpose built spray booths, then operate the spraying systems safely and accurately to achieve high quality finishes on manufactured products. You carry out quality checks using appropriate tools and techniques, addressing any defects through touch up work. The role also includes cleaning and maintaining equipment after use and upholding housekeeping standards to keep the paint and conformal coating areas clean, safe, and compliant for all personnel. Core duties: You will have experience in paint spraying and /or Conformal coating environments You will have the ability to closely follow written instructions and keep records for audit purposes. You will be able to follow strict safety requirements associated with the storage and use of hazardous materials and the disposal of hazardous material waste You will also be able to wear protective clothing including air-fed masks. Please note that protective clothing, masks, gloves and goggles must be worn when handling hazardous materials and spraying The Team: The team is responsible for spray painting Head Up Display (HUD) units, Flight Control Sticks, Fast Jet Throttle controls and other similar type -high technology products. On the conformal coating side, you will be spraying a humiseal coating onto printed circuit boards that are eventually assembled into the aforementioned products. Why BAE Systems? Here you'll build a career with purpose and limitless possibilities. With lifelong learning and meaningful work, this is a place where you can grow your career with confidence and be empowered to be your best. You'll be recognised for your contribution and enjoy rewards tailored to what's most important to you and your family, support for your financial and personal wellbeing, as well as a balanced lifestyle. In an environment embracing sustainable ways of working and with a strong sense of shared purpose, our supportive culture is a place you can feel you belong and proud of the difference you make. A place where everyone can thrive: We're committed to building an inclusive workplace where everyone feels valued and supported. We know that a diversity of backgrounds, perspectives and experiences strengthens our teams and is vital to the work we do. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role, to allow for meaningful security vetting checks. Closing Date: 29th June 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role. Therefore, if you are interested, please submit your application as early as possible.
Jun 16, 2026
Full time
Job Title: Production Technician (Sprayer) Location: Rochester - Onsite Salary: Circa £32,773 dependent on experience Who we are: Join BAE Systems and you'll be part of something bigger. As a valued member of our global colleague network, you'll bring your unique skills and perspectives to help pioneer progress and protect what matters most. You'll be trusted to play your part in delivering the advanced, technology-led defence, aerospace and security solutions of tomorrow, shaping a safer future, for all of us. From the depths of the ocean, to the far reaches of space, there's no limit to where a career at BAE Systems could take you. What you'll be doing: In this role, you prepare surfaces for coating by removing grease, dirt, and contaminants to ensure proper adhesion of spray paint or conformal coatings. You mix paints and chemicals to meet customer specifications, following correct methods and safety regulations. Before work begins, you set up spray equipment, materials, and purpose built spray booths, then operate the spraying systems safely and accurately to achieve high quality finishes on manufactured products. You carry out quality checks using appropriate tools and techniques, addressing any defects through touch up work. The role also includes cleaning and maintaining equipment after use and upholding housekeeping standards to keep the paint and conformal coating areas clean, safe, and compliant for all personnel. Core duties: You will have experience in paint spraying and /or Conformal coating environments You will have the ability to closely follow written instructions and keep records for audit purposes. You will be able to follow strict safety requirements associated with the storage and use of hazardous materials and the disposal of hazardous material waste You will also be able to wear protective clothing including air-fed masks. Please note that protective clothing, masks, gloves and goggles must be worn when handling hazardous materials and spraying The Team: The team is responsible for spray painting Head Up Display (HUD) units, Flight Control Sticks, Fast Jet Throttle controls and other similar type -high technology products. On the conformal coating side, you will be spraying a humiseal coating onto printed circuit boards that are eventually assembled into the aforementioned products. Why BAE Systems? Here you'll build a career with purpose and limitless possibilities. With lifelong learning and meaningful work, this is a place where you can grow your career with confidence and be empowered to be your best. You'll be recognised for your contribution and enjoy rewards tailored to what's most important to you and your family, support for your financial and personal wellbeing, as well as a balanced lifestyle. In an environment embracing sustainable ways of working and with a strong sense of shared purpose, our supportive culture is a place you can feel you belong and proud of the difference you make. A place where everyone can thrive: We're committed to building an inclusive workplace where everyone feels valued and supported. We know that a diversity of backgrounds, perspectives and experiences strengthens our teams and is vital to the work we do. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role, to allow for meaningful security vetting checks. Closing Date: 29th June 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role. Therefore, if you are interested, please submit your application as early as possible.
Job Title: Production Technician (Sprayer) Location: Rochester - Onsite Salary: Circa £32,773 dependent on experience Who we are: Join BAE Systems and you'll be part of something bigger. As a valued member of our global colleague network, you'll bring your unique skills and perspectives to help pioneer progress and protect what matters most. You'll be trusted to play your part in delivering the advanced, technology-led defence, aerospace and security solutions of tomorrow, shaping a safer future, for all of us. From the depths of the ocean, to the far reaches of space, there's no limit to where a career at BAE Systems could take you. What you'll be doing: In this role, you prepare surfaces for coating by removing grease, dirt, and contaminants to ensure proper adhesion of spray paint or conformal coatings. You mix paints and chemicals to meet customer specifications, following correct methods and safety regulations. Before work begins, you set up spray equipment, materials, and purpose built spray booths, then operate the spraying systems safely and accurately to achieve high quality finishes on manufactured products. You carry out quality checks using appropriate tools and techniques, addressing any defects through touch up work. The role also includes cleaning and maintaining equipment after use and upholding housekeeping standards to keep the paint and conformal coating areas clean, safe, and compliant for all personnel. Core duties: You will have experience in paint spraying and /or Conformal coating environments You will have the ability to closely follow written instructions and keep records for audit purposes. You will be able to follow strict safety requirements associated with the storage and use of hazardous materials and the disposal of hazardous material waste You will also be able to wear protective clothing including air-fed masks. Please note that protective clothing, masks, gloves and goggles must be worn when handling hazardous materials and spraying The Team: The team is responsible for spray painting Head Up Display (HUD) units, Flight Control Sticks, Fast Jet Throttle controls and other similar type -high technology products. On the conformal coating side, you will be spraying a humiseal coating onto printed circuit boards that are eventually assembled into the aforementioned products. Why BAE Systems? Here you'll build a career with purpose and limitless possibilities. With lifelong learning and meaningful work, this is a place where you can grow your career with confidence and be empowered to be your best. You'll be recognised for your contribution and enjoy rewards tailored to what's most important to you and your family, support for your financial and personal wellbeing, as well as a balanced lifestyle. In an environment embracing sustainable ways of working and with a strong sense of shared purpose, our supportive culture is a place you can feel you belong and proud of the difference you make. A place where everyone can thrive: We're committed to building an inclusive workplace where everyone feels valued and supported. We know that a diversity of backgrounds, perspectives and experiences strengthens our teams and is vital to the work we do. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role, to allow for meaningful security vetting checks. Closing Date: 29th June 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role. Therefore, if you are interested, please submit your application as early as possible.
Jun 16, 2026
Full time
Job Title: Production Technician (Sprayer) Location: Rochester - Onsite Salary: Circa £32,773 dependent on experience Who we are: Join BAE Systems and you'll be part of something bigger. As a valued member of our global colleague network, you'll bring your unique skills and perspectives to help pioneer progress and protect what matters most. You'll be trusted to play your part in delivering the advanced, technology-led defence, aerospace and security solutions of tomorrow, shaping a safer future, for all of us. From the depths of the ocean, to the far reaches of space, there's no limit to where a career at BAE Systems could take you. What you'll be doing: In this role, you prepare surfaces for coating by removing grease, dirt, and contaminants to ensure proper adhesion of spray paint or conformal coatings. You mix paints and chemicals to meet customer specifications, following correct methods and safety regulations. Before work begins, you set up spray equipment, materials, and purpose built spray booths, then operate the spraying systems safely and accurately to achieve high quality finishes on manufactured products. You carry out quality checks using appropriate tools and techniques, addressing any defects through touch up work. The role also includes cleaning and maintaining equipment after use and upholding housekeeping standards to keep the paint and conformal coating areas clean, safe, and compliant for all personnel. Core duties: You will have experience in paint spraying and /or Conformal coating environments You will have the ability to closely follow written instructions and keep records for audit purposes. You will be able to follow strict safety requirements associated with the storage and use of hazardous materials and the disposal of hazardous material waste You will also be able to wear protective clothing including air-fed masks. Please note that protective clothing, masks, gloves and goggles must be worn when handling hazardous materials and spraying The Team: The team is responsible for spray painting Head Up Display (HUD) units, Flight Control Sticks, Fast Jet Throttle controls and other similar type -high technology products. On the conformal coating side, you will be spraying a humiseal coating onto printed circuit boards that are eventually assembled into the aforementioned products. Why BAE Systems? Here you'll build a career with purpose and limitless possibilities. With lifelong learning and meaningful work, this is a place where you can grow your career with confidence and be empowered to be your best. You'll be recognised for your contribution and enjoy rewards tailored to what's most important to you and your family, support for your financial and personal wellbeing, as well as a balanced lifestyle. In an environment embracing sustainable ways of working and with a strong sense of shared purpose, our supportive culture is a place you can feel you belong and proud of the difference you make. A place where everyone can thrive: We're committed to building an inclusive workplace where everyone feels valued and supported. We know that a diversity of backgrounds, perspectives and experiences strengthens our teams and is vital to the work we do. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role, to allow for meaningful security vetting checks. Closing Date: 29th June 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role. Therefore, if you are interested, please submit your application as early as possible.
Job Title: Production Technician (Sprayer) Location: Rochester - Onsite Salary: Circa £32,773 dependent on experience Who we are: Join BAE Systems and you'll be part of something bigger. As a valued member of our global colleague network, you'll bring your unique skills and perspectives to help pioneer progress and protect what matters most. You'll be trusted to play your part in delivering the advanced, technology-led defence, aerospace and security solutions of tomorrow, shaping a safer future, for all of us. From the depths of the ocean, to the far reaches of space, there's no limit to where a career at BAE Systems could take you. What you'll be doing: In this role, you prepare surfaces for coating by removing grease, dirt, and contaminants to ensure proper adhesion of spray paint or conformal coatings. You mix paints and chemicals to meet customer specifications, following correct methods and safety regulations. Before work begins, you set up spray equipment, materials, and purpose built spray booths, then operate the spraying systems safely and accurately to achieve high quality finishes on manufactured products. You carry out quality checks using appropriate tools and techniques, addressing any defects through touch up work. The role also includes cleaning and maintaining equipment after use and upholding housekeeping standards to keep the paint and conformal coating areas clean, safe, and compliant for all personnel. Core duties: You will have experience in paint spraying and /or Conformal coating environments You will have the ability to closely follow written instructions and keep records for audit purposes. You will be able to follow strict safety requirements associated with the storage and use of hazardous materials and the disposal of hazardous material waste You will also be able to wear protective clothing including air-fed masks. Please note that protective clothing, masks, gloves and goggles must be worn when handling hazardous materials and spraying The Team: The team is responsible for spray painting Head Up Display (HUD) units, Flight Control Sticks, Fast Jet Throttle controls and other similar type -high technology products. On the conformal coating side, you will be spraying a humiseal coating onto printed circuit boards that are eventually assembled into the aforementioned products. Why BAE Systems? Here you'll build a career with purpose and limitless possibilities. With lifelong learning and meaningful work, this is a place where you can grow your career with confidence and be empowered to be your best. You'll be recognised for your contribution and enjoy rewards tailored to what's most important to you and your family, support for your financial and personal wellbeing, as well as a balanced lifestyle. In an environment embracing sustainable ways of working and with a strong sense of shared purpose, our supportive culture is a place you can feel you belong and proud of the difference you make. A place where everyone can thrive: We're committed to building an inclusive workplace where everyone feels valued and supported. We know that a diversity of backgrounds, perspectives and experiences strengthens our teams and is vital to the work we do. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role, to allow for meaningful security vetting checks. Closing Date: 29th June 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role. Therefore, if you are interested, please submit your application as early as possible.
Jun 16, 2026
Full time
Job Title: Production Technician (Sprayer) Location: Rochester - Onsite Salary: Circa £32,773 dependent on experience Who we are: Join BAE Systems and you'll be part of something bigger. As a valued member of our global colleague network, you'll bring your unique skills and perspectives to help pioneer progress and protect what matters most. You'll be trusted to play your part in delivering the advanced, technology-led defence, aerospace and security solutions of tomorrow, shaping a safer future, for all of us. From the depths of the ocean, to the far reaches of space, there's no limit to where a career at BAE Systems could take you. What you'll be doing: In this role, you prepare surfaces for coating by removing grease, dirt, and contaminants to ensure proper adhesion of spray paint or conformal coatings. You mix paints and chemicals to meet customer specifications, following correct methods and safety regulations. Before work begins, you set up spray equipment, materials, and purpose built spray booths, then operate the spraying systems safely and accurately to achieve high quality finishes on manufactured products. You carry out quality checks using appropriate tools and techniques, addressing any defects through touch up work. The role also includes cleaning and maintaining equipment after use and upholding housekeeping standards to keep the paint and conformal coating areas clean, safe, and compliant for all personnel. Core duties: You will have experience in paint spraying and /or Conformal coating environments You will have the ability to closely follow written instructions and keep records for audit purposes. You will be able to follow strict safety requirements associated with the storage and use of hazardous materials and the disposal of hazardous material waste You will also be able to wear protective clothing including air-fed masks. Please note that protective clothing, masks, gloves and goggles must be worn when handling hazardous materials and spraying The Team: The team is responsible for spray painting Head Up Display (HUD) units, Flight Control Sticks, Fast Jet Throttle controls and other similar type -high technology products. On the conformal coating side, you will be spraying a humiseal coating onto printed circuit boards that are eventually assembled into the aforementioned products. Why BAE Systems? Here you'll build a career with purpose and limitless possibilities. With lifelong learning and meaningful work, this is a place where you can grow your career with confidence and be empowered to be your best. You'll be recognised for your contribution and enjoy rewards tailored to what's most important to you and your family, support for your financial and personal wellbeing, as well as a balanced lifestyle. In an environment embracing sustainable ways of working and with a strong sense of shared purpose, our supportive culture is a place you can feel you belong and proud of the difference you make. A place where everyone can thrive: We're committed to building an inclusive workplace where everyone feels valued and supported. We know that a diversity of backgrounds, perspectives and experiences strengthens our teams and is vital to the work we do. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role, to allow for meaningful security vetting checks. Closing Date: 29th June 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role. Therefore, if you are interested, please submit your application as early as possible.
Job Title: Production Technician (Sprayer) Location: Rochester - Onsite Salary: Circa £32,773 dependent on experience Who we are: Join BAE Systems and you'll be part of something bigger. As a valued member of our global colleague network, you'll bring your unique skills and perspectives to help pioneer progress and protect what matters most. You'll be trusted to play your part in delivering the advanced, technology-led defence, aerospace and security solutions of tomorrow, shaping a safer future, for all of us. From the depths of the ocean, to the far reaches of space, there's no limit to where a career at BAE Systems could take you. What you'll be doing: In this role, you prepare surfaces for coating by removing grease, dirt, and contaminants to ensure proper adhesion of spray paint or conformal coatings. You mix paints and chemicals to meet customer specifications, following correct methods and safety regulations. Before work begins, you set up spray equipment, materials, and purpose built spray booths, then operate the spraying systems safely and accurately to achieve high quality finishes on manufactured products. You carry out quality checks using appropriate tools and techniques, addressing any defects through touch up work. The role also includes cleaning and maintaining equipment after use and upholding housekeeping standards to keep the paint and conformal coating areas clean, safe, and compliant for all personnel. Core duties: You will have experience in paint spraying and /or Conformal coating environments You will have the ability to closely follow written instructions and keep records for audit purposes. You will be able to follow strict safety requirements associated with the storage and use of hazardous materials and the disposal of hazardous material waste You will also be able to wear protective clothing including air-fed masks. Please note that protective clothing, masks, gloves and goggles must be worn when handling hazardous materials and spraying The Team: The team is responsible for spray painting Head Up Display (HUD) units, Flight Control Sticks, Fast Jet Throttle controls and other similar type -high technology products. On the conformal coating side, you will be spraying a humiseal coating onto printed circuit boards that are eventually assembled into the aforementioned products. Why BAE Systems? Here you'll build a career with purpose and limitless possibilities. With lifelong learning and meaningful work, this is a place where you can grow your career with confidence and be empowered to be your best. You'll be recognised for your contribution and enjoy rewards tailored to what's most important to you and your family, support for your financial and personal wellbeing, as well as a balanced lifestyle. In an environment embracing sustainable ways of working and with a strong sense of shared purpose, our supportive culture is a place you can feel you belong and proud of the difference you make. A place where everyone can thrive: We're committed to building an inclusive workplace where everyone feels valued and supported. We know that a diversity of backgrounds, perspectives and experiences strengthens our teams and is vital to the work we do. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role, to allow for meaningful security vetting checks. Closing Date: 29th June 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role. Therefore, if you are interested, please submit your application as early as possible.
Jun 16, 2026
Full time
Job Title: Production Technician (Sprayer) Location: Rochester - Onsite Salary: Circa £32,773 dependent on experience Who we are: Join BAE Systems and you'll be part of something bigger. As a valued member of our global colleague network, you'll bring your unique skills and perspectives to help pioneer progress and protect what matters most. You'll be trusted to play your part in delivering the advanced, technology-led defence, aerospace and security solutions of tomorrow, shaping a safer future, for all of us. From the depths of the ocean, to the far reaches of space, there's no limit to where a career at BAE Systems could take you. What you'll be doing: In this role, you prepare surfaces for coating by removing grease, dirt, and contaminants to ensure proper adhesion of spray paint or conformal coatings. You mix paints and chemicals to meet customer specifications, following correct methods and safety regulations. Before work begins, you set up spray equipment, materials, and purpose built spray booths, then operate the spraying systems safely and accurately to achieve high quality finishes on manufactured products. You carry out quality checks using appropriate tools and techniques, addressing any defects through touch up work. The role also includes cleaning and maintaining equipment after use and upholding housekeeping standards to keep the paint and conformal coating areas clean, safe, and compliant for all personnel. Core duties: You will have experience in paint spraying and /or Conformal coating environments You will have the ability to closely follow written instructions and keep records for audit purposes. You will be able to follow strict safety requirements associated with the storage and use of hazardous materials and the disposal of hazardous material waste You will also be able to wear protective clothing including air-fed masks. Please note that protective clothing, masks, gloves and goggles must be worn when handling hazardous materials and spraying The Team: The team is responsible for spray painting Head Up Display (HUD) units, Flight Control Sticks, Fast Jet Throttle controls and other similar type -high technology products. On the conformal coating side, you will be spraying a humiseal coating onto printed circuit boards that are eventually assembled into the aforementioned products. Why BAE Systems? Here you'll build a career with purpose and limitless possibilities. With lifelong learning and meaningful work, this is a place where you can grow your career with confidence and be empowered to be your best. You'll be recognised for your contribution and enjoy rewards tailored to what's most important to you and your family, support for your financial and personal wellbeing, as well as a balanced lifestyle. In an environment embracing sustainable ways of working and with a strong sense of shared purpose, our supportive culture is a place you can feel you belong and proud of the difference you make. A place where everyone can thrive: We're committed to building an inclusive workplace where everyone feels valued and supported. We know that a diversity of backgrounds, perspectives and experiences strengthens our teams and is vital to the work we do. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role, to allow for meaningful security vetting checks. Closing Date: 29th June 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role. Therefore, if you are interested, please submit your application as early as possible.
An exciting opportunity has arisen for a Pest Control Technician to join a well-established company specialising in pest control for both residential and commercial clients using technology-driven solutions. As a Pest Control Technician, you will be visiting customers, conducting inspections, carrying out treatments, and promoting additional services where appropriate. This role offers a salary range of £26,500 - £33,000 and benefits. Full training will be provided. Trainee level candidates looking to build a long-term career within the pest control industry will also be considered. Salary details: Trainee: £26,500 + 5,000 allowance = £31,500 Qualified: £28,000 + £5,000 allowance = £33,000 What we are looking for Previously worked as a Pest Control Foot Technician, Pest Control Technician, Pest Technician, Foot Technician, Pest Controller, Trainee Pest Control Technician, Trainee Pest Controller, Pest Control Van Technician, Junior Pest Control Technician, Pest Control Trainee or in a similar role. Have RSPH Level 2 qualification (for qualified technicians) Strong attention to detail and methodical approach to work Ability to work independently and manage your schedule effectively Comfortable using mobile applications for reporting and scheduling Positive attitude, initiative, and commitment to delivering high-quality service What s on offer Competitive salary Performance-based incentives Regional allowance Company vehicle, fuel card, and uniform Pension scheme Healthcare cash plan and life assurance Referral programme and length-of-service recognition, including special leave benefits Structured career progression and professional training This is a fantastic opportunity to join a respected and growing organisation in the pest management sector. Important Information: We endeavour to process your personal data in a fair and transparent manner. In applying for this role, Additional Resources will be acting in your best interest and may contact you in relation to the role, either by email, phone or text message. For more information see our Privacy Policy on our website. It is important you are aware of your individual rights and the provisions the company has put in place to protect your data. If you would like further information on the policy or GDPR please contact us. Additional Resources Ltd is an Employment Business and an Employment Agency as defined within The Conduct of Employment Agencies & Employment Businesses Regulations 2003.
Jun 16, 2026
Full time
An exciting opportunity has arisen for a Pest Control Technician to join a well-established company specialising in pest control for both residential and commercial clients using technology-driven solutions. As a Pest Control Technician, you will be visiting customers, conducting inspections, carrying out treatments, and promoting additional services where appropriate. This role offers a salary range of £26,500 - £33,000 and benefits. Full training will be provided. Trainee level candidates looking to build a long-term career within the pest control industry will also be considered. Salary details: Trainee: £26,500 + 5,000 allowance = £31,500 Qualified: £28,000 + £5,000 allowance = £33,000 What we are looking for Previously worked as a Pest Control Foot Technician, Pest Control Technician, Pest Technician, Foot Technician, Pest Controller, Trainee Pest Control Technician, Trainee Pest Controller, Pest Control Van Technician, Junior Pest Control Technician, Pest Control Trainee or in a similar role. Have RSPH Level 2 qualification (for qualified technicians) Strong attention to detail and methodical approach to work Ability to work independently and manage your schedule effectively Comfortable using mobile applications for reporting and scheduling Positive attitude, initiative, and commitment to delivering high-quality service What s on offer Competitive salary Performance-based incentives Regional allowance Company vehicle, fuel card, and uniform Pension scheme Healthcare cash plan and life assurance Referral programme and length-of-service recognition, including special leave benefits Structured career progression and professional training This is a fantastic opportunity to join a respected and growing organisation in the pest management sector. Important Information: We endeavour to process your personal data in a fair and transparent manner. In applying for this role, Additional Resources will be acting in your best interest and may contact you in relation to the role, either by email, phone or text message. For more information see our Privacy Policy on our website. It is important you are aware of your individual rights and the provisions the company has put in place to protect your data. If you would like further information on the policy or GDPR please contact us. Additional Resources Ltd is an Employment Business and an Employment Agency as defined within The Conduct of Employment Agencies & Employment Businesses Regulations 2003.
Job Title: Production Technician (Sprayer) Location: Rochester - Onsite Salary: Circa £32,773 dependent on experience Who we are: Join BAE Systems and you'll be part of something bigger. As a valued member of our global colleague network, you'll bring your unique skills and perspectives to help pioneer progress and protect what matters most. You'll be trusted to play your part in delivering the advanced, technology-led defence, aerospace and security solutions of tomorrow, shaping a safer future, for all of us. From the depths of the ocean, to the far reaches of space, there's no limit to where a career at BAE Systems could take you. What you'll be doing: In this role, you prepare surfaces for coating by removing grease, dirt, and contaminants to ensure proper adhesion of spray paint or conformal coatings. You mix paints and chemicals to meet customer specifications, following correct methods and safety regulations. Before work begins, you set up spray equipment, materials, and purpose built spray booths, then operate the spraying systems safely and accurately to achieve high quality finishes on manufactured products. You carry out quality checks using appropriate tools and techniques, addressing any defects through touch up work. The role also includes cleaning and maintaining equipment after use and upholding housekeeping standards to keep the paint and conformal coating areas clean, safe, and compliant for all personnel. Core duties: You will have experience in paint spraying and /or Conformal coating environments You will have the ability to closely follow written instructions and keep records for audit purposes. You will be able to follow strict safety requirements associated with the storage and use of hazardous materials and the disposal of hazardous material waste You will also be able to wear protective clothing including air-fed masks. Please note that protective clothing, masks, gloves and goggles must be worn when handling hazardous materials and spraying The Team: The team is responsible for spray painting Head Up Display (HUD) units, Flight Control Sticks, Fast Jet Throttle controls and other similar type -high technology products. On the conformal coating side, you will be spraying a humiseal coating onto printed circuit boards that are eventually assembled into the aforementioned products. Why BAE Systems? Here you'll build a career with purpose and limitless possibilities. With lifelong learning and meaningful work, this is a place where you can grow your career with confidence and be empowered to be your best. You'll be recognised for your contribution and enjoy rewards tailored to what's most important to you and your family, support for your financial and personal wellbeing, as well as a balanced lifestyle. In an environment embracing sustainable ways of working and with a strong sense of shared purpose, our supportive culture is a place you can feel you belong and proud of the difference you make. A place where everyone can thrive: We're committed to building an inclusive workplace where everyone feels valued and supported. We know that a diversity of backgrounds, perspectives and experiences strengthens our teams and is vital to the work we do. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role, to allow for meaningful security vetting checks. Closing Date: 29th June 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role. Therefore, if you are interested, please submit your application as early as possible.
Jun 16, 2026
Full time
Job Title: Production Technician (Sprayer) Location: Rochester - Onsite Salary: Circa £32,773 dependent on experience Who we are: Join BAE Systems and you'll be part of something bigger. As a valued member of our global colleague network, you'll bring your unique skills and perspectives to help pioneer progress and protect what matters most. You'll be trusted to play your part in delivering the advanced, technology-led defence, aerospace and security solutions of tomorrow, shaping a safer future, for all of us. From the depths of the ocean, to the far reaches of space, there's no limit to where a career at BAE Systems could take you. What you'll be doing: In this role, you prepare surfaces for coating by removing grease, dirt, and contaminants to ensure proper adhesion of spray paint or conformal coatings. You mix paints and chemicals to meet customer specifications, following correct methods and safety regulations. Before work begins, you set up spray equipment, materials, and purpose built spray booths, then operate the spraying systems safely and accurately to achieve high quality finishes on manufactured products. You carry out quality checks using appropriate tools and techniques, addressing any defects through touch up work. The role also includes cleaning and maintaining equipment after use and upholding housekeeping standards to keep the paint and conformal coating areas clean, safe, and compliant for all personnel. Core duties: You will have experience in paint spraying and /or Conformal coating environments You will have the ability to closely follow written instructions and keep records for audit purposes. You will be able to follow strict safety requirements associated with the storage and use of hazardous materials and the disposal of hazardous material waste You will also be able to wear protective clothing including air-fed masks. Please note that protective clothing, masks, gloves and goggles must be worn when handling hazardous materials and spraying The Team: The team is responsible for spray painting Head Up Display (HUD) units, Flight Control Sticks, Fast Jet Throttle controls and other similar type -high technology products. On the conformal coating side, you will be spraying a humiseal coating onto printed circuit boards that are eventually assembled into the aforementioned products. Why BAE Systems? Here you'll build a career with purpose and limitless possibilities. With lifelong learning and meaningful work, this is a place where you can grow your career with confidence and be empowered to be your best. You'll be recognised for your contribution and enjoy rewards tailored to what's most important to you and your family, support for your financial and personal wellbeing, as well as a balanced lifestyle. In an environment embracing sustainable ways of working and with a strong sense of shared purpose, our supportive culture is a place you can feel you belong and proud of the difference you make. A place where everyone can thrive: We're committed to building an inclusive workplace where everyone feels valued and supported. We know that a diversity of backgrounds, perspectives and experiences strengthens our teams and is vital to the work we do. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role, to allow for meaningful security vetting checks. Closing Date: 29th June 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role. Therefore, if you are interested, please submit your application as early as possible.
Job Title: Production Technician (Sprayer) Location: Rochester - Onsite Salary: Circa £32,773 dependent on experience Who we are: Join BAE Systems and you'll be part of something bigger. As a valued member of our global colleague network, you'll bring your unique skills and perspectives to help pioneer progress and protect what matters most. You'll be trusted to play your part in delivering the advanced, technology-led defence, aerospace and security solutions of tomorrow, shaping a safer future, for all of us. From the depths of the ocean, to the far reaches of space, there's no limit to where a career at BAE Systems could take you. What you'll be doing: In this role, you prepare surfaces for coating by removing grease, dirt, and contaminants to ensure proper adhesion of spray paint or conformal coatings. You mix paints and chemicals to meet customer specifications, following correct methods and safety regulations. Before work begins, you set up spray equipment, materials, and purpose built spray booths, then operate the spraying systems safely and accurately to achieve high quality finishes on manufactured products. You carry out quality checks using appropriate tools and techniques, addressing any defects through touch up work. The role also includes cleaning and maintaining equipment after use and upholding housekeeping standards to keep the paint and conformal coating areas clean, safe, and compliant for all personnel. Core duties: You will have experience in paint spraying and /or Conformal coating environments You will have the ability to closely follow written instructions and keep records for audit purposes. You will be able to follow strict safety requirements associated with the storage and use of hazardous materials and the disposal of hazardous material waste You will also be able to wear protective clothing including air-fed masks. Please note that protective clothing, masks, gloves and goggles must be worn when handling hazardous materials and spraying The Team: The team is responsible for spray painting Head Up Display (HUD) units, Flight Control Sticks, Fast Jet Throttle controls and other similar type -high technology products. On the conformal coating side, you will be spraying a humiseal coating onto printed circuit boards that are eventually assembled into the aforementioned products. Why BAE Systems? Here you'll build a career with purpose and limitless possibilities. With lifelong learning and meaningful work, this is a place where you can grow your career with confidence and be empowered to be your best. You'll be recognised for your contribution and enjoy rewards tailored to what's most important to you and your family, support for your financial and personal wellbeing, as well as a balanced lifestyle. In an environment embracing sustainable ways of working and with a strong sense of shared purpose, our supportive culture is a place you can feel you belong and proud of the difference you make. A place where everyone can thrive: We're committed to building an inclusive workplace where everyone feels valued and supported. We know that a diversity of backgrounds, perspectives and experiences strengthens our teams and is vital to the work we do. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role, to allow for meaningful security vetting checks. Closing Date: 29th June 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role. Therefore, if you are interested, please submit your application as early as possible.
Jun 16, 2026
Full time
Job Title: Production Technician (Sprayer) Location: Rochester - Onsite Salary: Circa £32,773 dependent on experience Who we are: Join BAE Systems and you'll be part of something bigger. As a valued member of our global colleague network, you'll bring your unique skills and perspectives to help pioneer progress and protect what matters most. You'll be trusted to play your part in delivering the advanced, technology-led defence, aerospace and security solutions of tomorrow, shaping a safer future, for all of us. From the depths of the ocean, to the far reaches of space, there's no limit to where a career at BAE Systems could take you. What you'll be doing: In this role, you prepare surfaces for coating by removing grease, dirt, and contaminants to ensure proper adhesion of spray paint or conformal coatings. You mix paints and chemicals to meet customer specifications, following correct methods and safety regulations. Before work begins, you set up spray equipment, materials, and purpose built spray booths, then operate the spraying systems safely and accurately to achieve high quality finishes on manufactured products. You carry out quality checks using appropriate tools and techniques, addressing any defects through touch up work. The role also includes cleaning and maintaining equipment after use and upholding housekeeping standards to keep the paint and conformal coating areas clean, safe, and compliant for all personnel. Core duties: You will have experience in paint spraying and /or Conformal coating environments You will have the ability to closely follow written instructions and keep records for audit purposes. You will be able to follow strict safety requirements associated with the storage and use of hazardous materials and the disposal of hazardous material waste You will also be able to wear protective clothing including air-fed masks. Please note that protective clothing, masks, gloves and goggles must be worn when handling hazardous materials and spraying The Team: The team is responsible for spray painting Head Up Display (HUD) units, Flight Control Sticks, Fast Jet Throttle controls and other similar type -high technology products. On the conformal coating side, you will be spraying a humiseal coating onto printed circuit boards that are eventually assembled into the aforementioned products. Why BAE Systems? Here you'll build a career with purpose and limitless possibilities. With lifelong learning and meaningful work, this is a place where you can grow your career with confidence and be empowered to be your best. You'll be recognised for your contribution and enjoy rewards tailored to what's most important to you and your family, support for your financial and personal wellbeing, as well as a balanced lifestyle. In an environment embracing sustainable ways of working and with a strong sense of shared purpose, our supportive culture is a place you can feel you belong and proud of the difference you make. A place where everyone can thrive: We're committed to building an inclusive workplace where everyone feels valued and supported. We know that a diversity of backgrounds, perspectives and experiences strengthens our teams and is vital to the work we do. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role, to allow for meaningful security vetting checks. Closing Date: 29th June 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role. Therefore, if you are interested, please submit your application as early as possible.
Job Title: Production Technician (Sprayer) Location: Rochester - Onsite Salary: Circa £32,773 dependent on experience Who we are: Join BAE Systems and you'll be part of something bigger. As a valued member of our global colleague network, you'll bring your unique skills and perspectives to help pioneer progress and protect what matters most. You'll be trusted to play your part in delivering the advanced, technology-led defence, aerospace and security solutions of tomorrow, shaping a safer future, for all of us. From the depths of the ocean, to the far reaches of space, there's no limit to where a career at BAE Systems could take you. What you'll be doing: In this role, you prepare surfaces for coating by removing grease, dirt, and contaminants to ensure proper adhesion of spray paint or conformal coatings. You mix paints and chemicals to meet customer specifications, following correct methods and safety regulations. Before work begins, you set up spray equipment, materials, and purpose built spray booths, then operate the spraying systems safely and accurately to achieve high quality finishes on manufactured products. You carry out quality checks using appropriate tools and techniques, addressing any defects through touch up work. The role also includes cleaning and maintaining equipment after use and upholding housekeeping standards to keep the paint and conformal coating areas clean, safe, and compliant for all personnel. Core duties: You will have experience in paint spraying and /or Conformal coating environments You will have the ability to closely follow written instructions and keep records for audit purposes. You will be able to follow strict safety requirements associated with the storage and use of hazardous materials and the disposal of hazardous material waste You will also be able to wear protective clothing including air-fed masks. Please note that protective clothing, masks, gloves and goggles must be worn when handling hazardous materials and spraying The Team: The team is responsible for spray painting Head Up Display (HUD) units, Flight Control Sticks, Fast Jet Throttle controls and other similar type -high technology products. On the conformal coating side, you will be spraying a humiseal coating onto printed circuit boards that are eventually assembled into the aforementioned products. Why BAE Systems? Here you'll build a career with purpose and limitless possibilities. With lifelong learning and meaningful work, this is a place where you can grow your career with confidence and be empowered to be your best. You'll be recognised for your contribution and enjoy rewards tailored to what's most important to you and your family, support for your financial and personal wellbeing, as well as a balanced lifestyle. In an environment embracing sustainable ways of working and with a strong sense of shared purpose, our supportive culture is a place you can feel you belong and proud of the difference you make. A place where everyone can thrive: We're committed to building an inclusive workplace where everyone feels valued and supported. We know that a diversity of backgrounds, perspectives and experiences strengthens our teams and is vital to the work we do. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role, to allow for meaningful security vetting checks. Closing Date: 29th June 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role. Therefore, if you are interested, please submit your application as early as possible.
Jun 16, 2026
Full time
Job Title: Production Technician (Sprayer) Location: Rochester - Onsite Salary: Circa £32,773 dependent on experience Who we are: Join BAE Systems and you'll be part of something bigger. As a valued member of our global colleague network, you'll bring your unique skills and perspectives to help pioneer progress and protect what matters most. You'll be trusted to play your part in delivering the advanced, technology-led defence, aerospace and security solutions of tomorrow, shaping a safer future, for all of us. From the depths of the ocean, to the far reaches of space, there's no limit to where a career at BAE Systems could take you. What you'll be doing: In this role, you prepare surfaces for coating by removing grease, dirt, and contaminants to ensure proper adhesion of spray paint or conformal coatings. You mix paints and chemicals to meet customer specifications, following correct methods and safety regulations. Before work begins, you set up spray equipment, materials, and purpose built spray booths, then operate the spraying systems safely and accurately to achieve high quality finishes on manufactured products. You carry out quality checks using appropriate tools and techniques, addressing any defects through touch up work. The role also includes cleaning and maintaining equipment after use and upholding housekeeping standards to keep the paint and conformal coating areas clean, safe, and compliant for all personnel. Core duties: You will have experience in paint spraying and /or Conformal coating environments You will have the ability to closely follow written instructions and keep records for audit purposes. You will be able to follow strict safety requirements associated with the storage and use of hazardous materials and the disposal of hazardous material waste You will also be able to wear protective clothing including air-fed masks. Please note that protective clothing, masks, gloves and goggles must be worn when handling hazardous materials and spraying The Team: The team is responsible for spray painting Head Up Display (HUD) units, Flight Control Sticks, Fast Jet Throttle controls and other similar type -high technology products. On the conformal coating side, you will be spraying a humiseal coating onto printed circuit boards that are eventually assembled into the aforementioned products. Why BAE Systems? Here you'll build a career with purpose and limitless possibilities. With lifelong learning and meaningful work, this is a place where you can grow your career with confidence and be empowered to be your best. You'll be recognised for your contribution and enjoy rewards tailored to what's most important to you and your family, support for your financial and personal wellbeing, as well as a balanced lifestyle. In an environment embracing sustainable ways of working and with a strong sense of shared purpose, our supportive culture is a place you can feel you belong and proud of the difference you make. A place where everyone can thrive: We're committed to building an inclusive workplace where everyone feels valued and supported. We know that a diversity of backgrounds, perspectives and experiences strengthens our teams and is vital to the work we do. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role, to allow for meaningful security vetting checks. Closing Date: 29th June 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role. Therefore, if you are interested, please submit your application as early as possible.
Exciting Opportunity for a Vehicle Technician at a Renowned Franchise Dealership in Brighton Our client, a well-established franchise dealership in Brighton, is seeking an experienced Vehicle Technician to join their reputable family-run business. With a history spanning over 165 years and a network of more than 80 sites along the South Coast, this company prides itself on delivering exceptional customer service, honesty, and quality workmanship. The Vehicle Technician role offers a highly supportive environment, ongoing manufacturer-standard training, and a competitive salary package. Benefits: Competitive basic salary ranging from £29,835 to £40,885, with potential OTE up to £45,685 Opportunity for additional earnings through overtime and MOT bonuses MOT training provided if eligible Car benefit scheme from day one Structured ongoing training and career development programmes Enhanced holiday entitlement plus family leave options Healthcare and pension schemes Discounts on new and used vehicles, servicing, and parts Supportive team environment with a focus on professional growth Duties: Conduct comprehensive vehicle examinations, including electronic vehicle health checks Identify non-routine faults and defects in the workshop or during road tests Carry out repairs and servicing of customer vehicles in accordance with technical standards Provide excellent, courteous, and responsive service to colleagues and customers Communicate vehicle progress and technical issues effectively to the service team and customers Support and mentor apprentices within the workshop Assist in developing and implementing improved work methods to enhance efficiency Requirements of a Vehicle Technician: NVQ Level 3 or equivalent in Vehicle Maintenance and Repair Proven experience as a Vehicle Technician, ideally within a main dealer environment Full UK driving licence is essential MOT licence desirable but not mandatory Ability to work within structured processes and promote best practices Customer-focused with strong communication skills First-time fix mentality and commitment to ongoing learning Team player, capable of supporting colleagues and apprentices This Vehicle Technician position is an ideal role for skilled professionals eager to join a reputable employer that values quality, training, and career development. If you are seeking a challenging and rewarding opportunity, we encourage you to apply now. Contact Martin Bane, Automotive Recruitment Specialist at Perfect Placement covering Brighton and East Sussex today to discover more about this fantastic opportunity. Our team of Automotive Recruitment Consultants all share a passion for connecting talented candidates with the best jobs in the Automotive Industry. So, if you are looking to improve your career and want to hear about more Motor Trade jobs in your local area, please contact us today.
Jun 16, 2026
Full time
Exciting Opportunity for a Vehicle Technician at a Renowned Franchise Dealership in Brighton Our client, a well-established franchise dealership in Brighton, is seeking an experienced Vehicle Technician to join their reputable family-run business. With a history spanning over 165 years and a network of more than 80 sites along the South Coast, this company prides itself on delivering exceptional customer service, honesty, and quality workmanship. The Vehicle Technician role offers a highly supportive environment, ongoing manufacturer-standard training, and a competitive salary package. Benefits: Competitive basic salary ranging from £29,835 to £40,885, with potential OTE up to £45,685 Opportunity for additional earnings through overtime and MOT bonuses MOT training provided if eligible Car benefit scheme from day one Structured ongoing training and career development programmes Enhanced holiday entitlement plus family leave options Healthcare and pension schemes Discounts on new and used vehicles, servicing, and parts Supportive team environment with a focus on professional growth Duties: Conduct comprehensive vehicle examinations, including electronic vehicle health checks Identify non-routine faults and defects in the workshop or during road tests Carry out repairs and servicing of customer vehicles in accordance with technical standards Provide excellent, courteous, and responsive service to colleagues and customers Communicate vehicle progress and technical issues effectively to the service team and customers Support and mentor apprentices within the workshop Assist in developing and implementing improved work methods to enhance efficiency Requirements of a Vehicle Technician: NVQ Level 3 or equivalent in Vehicle Maintenance and Repair Proven experience as a Vehicle Technician, ideally within a main dealer environment Full UK driving licence is essential MOT licence desirable but not mandatory Ability to work within structured processes and promote best practices Customer-focused with strong communication skills First-time fix mentality and commitment to ongoing learning Team player, capable of supporting colleagues and apprentices This Vehicle Technician position is an ideal role for skilled professionals eager to join a reputable employer that values quality, training, and career development. If you are seeking a challenging and rewarding opportunity, we encourage you to apply now. Contact Martin Bane, Automotive Recruitment Specialist at Perfect Placement covering Brighton and East Sussex today to discover more about this fantastic opportunity. Our team of Automotive Recruitment Consultants all share a passion for connecting talented candidates with the best jobs in the Automotive Industry. So, if you are looking to improve your career and want to hear about more Motor Trade jobs in your local area, please contact us today.
A leading global manufacturer of advanced power solutions is seeking a Test Technician to join its growing production team. Operating internationally across multiple high-tech industries, the company designs and manufactures specialist electronic systems that support innovation in medical technology, scientific research, industrial equipment, and advanced manufacturing applications. In this role as a Test Technician you will ensure products meet strict safety, quality and performance standards before release to customers. Key Responsibilities Set up and operate test equipment and processes Conduct functional, environmental, and performance tests Record and report test data and deviations Interpret technical drawings and specifications Maintain and calibrate test equipment Collaborate with engineering and quality teams Follow Quality and Safety regulations as well as internal SOP s The Test Technician role will also involve working closely with engineering and production teams to implement design changes, improve product performance and support continuous improvement initiatives within the manufacturing environment. Desirable High-voltage testing methods, Soldering and rework techniques to industry standards. Previous experience of working within a lean manufacturing environment would be highly advantageous. This is an excellent opportunity for a Test Technician to join an established and innovative engineering business offering long-term career development within a technically advanced manufacturing environment. INDMAN Due to the volume of applications, if you do not hear back within 5 working days, please assume your application has been unsuccessful. Check our website for more opportunities.
Jun 16, 2026
Full time
A leading global manufacturer of advanced power solutions is seeking a Test Technician to join its growing production team. Operating internationally across multiple high-tech industries, the company designs and manufactures specialist electronic systems that support innovation in medical technology, scientific research, industrial equipment, and advanced manufacturing applications. In this role as a Test Technician you will ensure products meet strict safety, quality and performance standards before release to customers. Key Responsibilities Set up and operate test equipment and processes Conduct functional, environmental, and performance tests Record and report test data and deviations Interpret technical drawings and specifications Maintain and calibrate test equipment Collaborate with engineering and quality teams Follow Quality and Safety regulations as well as internal SOP s The Test Technician role will also involve working closely with engineering and production teams to implement design changes, improve product performance and support continuous improvement initiatives within the manufacturing environment. Desirable High-voltage testing methods, Soldering and rework techniques to industry standards. Previous experience of working within a lean manufacturing environment would be highly advantageous. This is an excellent opportunity for a Test Technician to join an established and innovative engineering business offering long-term career development within a technically advanced manufacturing environment. INDMAN Due to the volume of applications, if you do not hear back within 5 working days, please assume your application has been unsuccessful. Check our website for more opportunities.
Job Title: Production Technician (Sprayer) Location: Rochester - Onsite Salary: Circa £32,773 dependent on experience Who we are: Join BAE Systems and you'll be part of something bigger. As a valued member of our global colleague network, you'll bring your unique skills and perspectives to help pioneer progress and protect what matters most. You'll be trusted to play your part in delivering the advanced, technology-led defence, aerospace and security solutions of tomorrow, shaping a safer future, for all of us. From the depths of the ocean, to the far reaches of space, there's no limit to where a career at BAE Systems could take you. What you'll be doing: In this role, you prepare surfaces for coating by removing grease, dirt, and contaminants to ensure proper adhesion of spray paint or conformal coatings. You mix paints and chemicals to meet customer specifications, following correct methods and safety regulations. Before work begins, you set up spray equipment, materials, and purpose built spray booths, then operate the spraying systems safely and accurately to achieve high quality finishes on manufactured products. You carry out quality checks using appropriate tools and techniques, addressing any defects through touch up work. The role also includes cleaning and maintaining equipment after use and upholding housekeeping standards to keep the paint and conformal coating areas clean, safe, and compliant for all personnel. Core duties: You will have experience in paint spraying and /or Conformal coating environments You will have the ability to closely follow written instructions and keep records for audit purposes. You will be able to follow strict safety requirements associated with the storage and use of hazardous materials and the disposal of hazardous material waste You will also be able to wear protective clothing including air-fed masks. Please note that protective clothing, masks, gloves and goggles must be worn when handling hazardous materials and spraying The Team: The team is responsible for spray painting Head Up Display (HUD) units, Flight Control Sticks, Fast Jet Throttle controls and other similar type -high technology products. On the conformal coating side, you will be spraying a humiseal coating onto printed circuit boards that are eventually assembled into the aforementioned products. Why BAE Systems? Here you'll build a career with purpose and limitless possibilities. With lifelong learning and meaningful work, this is a place where you can grow your career with confidence and be empowered to be your best. You'll be recognised for your contribution and enjoy rewards tailored to what's most important to you and your family, support for your financial and personal wellbeing, as well as a balanced lifestyle. In an environment embracing sustainable ways of working and with a strong sense of shared purpose, our supportive culture is a place you can feel you belong and proud of the difference you make. A place where everyone can thrive: We're committed to building an inclusive workplace where everyone feels valued and supported. We know that a diversity of backgrounds, perspectives and experiences strengthens our teams and is vital to the work we do. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role, to allow for meaningful security vetting checks. Closing Date: 29th June 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role. Therefore, if you are interested, please submit your application as early as possible.
Jun 16, 2026
Full time
Job Title: Production Technician (Sprayer) Location: Rochester - Onsite Salary: Circa £32,773 dependent on experience Who we are: Join BAE Systems and you'll be part of something bigger. As a valued member of our global colleague network, you'll bring your unique skills and perspectives to help pioneer progress and protect what matters most. You'll be trusted to play your part in delivering the advanced, technology-led defence, aerospace and security solutions of tomorrow, shaping a safer future, for all of us. From the depths of the ocean, to the far reaches of space, there's no limit to where a career at BAE Systems could take you. What you'll be doing: In this role, you prepare surfaces for coating by removing grease, dirt, and contaminants to ensure proper adhesion of spray paint or conformal coatings. You mix paints and chemicals to meet customer specifications, following correct methods and safety regulations. Before work begins, you set up spray equipment, materials, and purpose built spray booths, then operate the spraying systems safely and accurately to achieve high quality finishes on manufactured products. You carry out quality checks using appropriate tools and techniques, addressing any defects through touch up work. The role also includes cleaning and maintaining equipment after use and upholding housekeeping standards to keep the paint and conformal coating areas clean, safe, and compliant for all personnel. Core duties: You will have experience in paint spraying and /or Conformal coating environments You will have the ability to closely follow written instructions and keep records for audit purposes. You will be able to follow strict safety requirements associated with the storage and use of hazardous materials and the disposal of hazardous material waste You will also be able to wear protective clothing including air-fed masks. Please note that protective clothing, masks, gloves and goggles must be worn when handling hazardous materials and spraying The Team: The team is responsible for spray painting Head Up Display (HUD) units, Flight Control Sticks, Fast Jet Throttle controls and other similar type -high technology products. On the conformal coating side, you will be spraying a humiseal coating onto printed circuit boards that are eventually assembled into the aforementioned products. Why BAE Systems? Here you'll build a career with purpose and limitless possibilities. With lifelong learning and meaningful work, this is a place where you can grow your career with confidence and be empowered to be your best. You'll be recognised for your contribution and enjoy rewards tailored to what's most important to you and your family, support for your financial and personal wellbeing, as well as a balanced lifestyle. In an environment embracing sustainable ways of working and with a strong sense of shared purpose, our supportive culture is a place you can feel you belong and proud of the difference you make. A place where everyone can thrive: We're committed to building an inclusive workplace where everyone feels valued and supported. We know that a diversity of backgrounds, perspectives and experiences strengthens our teams and is vital to the work we do. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role, to allow for meaningful security vetting checks. Closing Date: 29th June 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role. Therefore, if you are interested, please submit your application as early as possible.
Your new company Hays Recruitment have partnered with Leicestershire County Council in the search for a Senior Technical Specialist with strong knowledge of firewalls, ideally with Cisco knowledge. As the SME in the team, you will lead on the operational management and administration of the corporate firewall infrastructure. Working alongside other specialists, you will bring extensive firewall skills and expertise to help support this critical infrastructure.Mentoring and guiding technical specialists and other technical staff is key as part of the knowledge sharing ethos within the team. You will also be expected to co-ordinate small teams of technicians to deliver new services and service improvements. Your new role will involve To own, support, install and administer corporate firewall and perimeter security solutions Liaise with customers and appropriate IT staff Advise on technical and security standards to ensure compliance, security of systems and services to maintain high service availability. The role will involve a varying combination of line management duties and in-depth technical knowledge and understanding across a range of IT infrastructure services. To co-ordinate small teams of technicians across I&T to deliver new services and service improvements. Work in a technical operations team that is responsible for the following technologies: Hyper-Converged Systems (HCI) Infrastructure Security SQL Database Administration System Backup Management & Administration Server administration (Windows, Solaris, Linux, VMWare) File Structure and Permission Management Facilities Management Security Testing Disaster Recovery What you need to succeed In depth experience of firewalls, ideally Cisco / Checkpoint Demonstrable experience in perimeter security Demonstrable experience with the principles and concepts of firewalls Experience upgrading, managing and monitoring firewalls Strong understanding of storage infrastructure Strong understanding of virtual infrastructure MS knowledge Strong desire to future proof perimeter security against future threats Ability to mentor and knowledge share There will be occasional out of hours requirements for planned works or major incidents, therefore you will need to be within an hour of the location and have your own transport. Sponsorship is not available for this role What you need to do now If you're interested in this role, click 'apply now' to forward an up-to-date copy of your CV, or call us now. If this job isn't quite right for you, but you are looking for a new position, please contact us for a confidential discussion about your career. Hays Specialist Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job you accept the T&C's, Privacy Policy and Disclaimers which can be found at (url removed)
Jun 16, 2026
Full time
Your new company Hays Recruitment have partnered with Leicestershire County Council in the search for a Senior Technical Specialist with strong knowledge of firewalls, ideally with Cisco knowledge. As the SME in the team, you will lead on the operational management and administration of the corporate firewall infrastructure. Working alongside other specialists, you will bring extensive firewall skills and expertise to help support this critical infrastructure.Mentoring and guiding technical specialists and other technical staff is key as part of the knowledge sharing ethos within the team. You will also be expected to co-ordinate small teams of technicians to deliver new services and service improvements. Your new role will involve To own, support, install and administer corporate firewall and perimeter security solutions Liaise with customers and appropriate IT staff Advise on technical and security standards to ensure compliance, security of systems and services to maintain high service availability. The role will involve a varying combination of line management duties and in-depth technical knowledge and understanding across a range of IT infrastructure services. To co-ordinate small teams of technicians across I&T to deliver new services and service improvements. Work in a technical operations team that is responsible for the following technologies: Hyper-Converged Systems (HCI) Infrastructure Security SQL Database Administration System Backup Management & Administration Server administration (Windows, Solaris, Linux, VMWare) File Structure and Permission Management Facilities Management Security Testing Disaster Recovery What you need to succeed In depth experience of firewalls, ideally Cisco / Checkpoint Demonstrable experience in perimeter security Demonstrable experience with the principles and concepts of firewalls Experience upgrading, managing and monitoring firewalls Strong understanding of storage infrastructure Strong understanding of virtual infrastructure MS knowledge Strong desire to future proof perimeter security against future threats Ability to mentor and knowledge share There will be occasional out of hours requirements for planned works or major incidents, therefore you will need to be within an hour of the location and have your own transport. Sponsorship is not available for this role What you need to do now If you're interested in this role, click 'apply now' to forward an up-to-date copy of your CV, or call us now. If this job isn't quite right for you, but you are looking for a new position, please contact us for a confidential discussion about your career. Hays Specialist Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job you accept the T&C's, Privacy Policy and Disclaimers which can be found at (url removed)
Our client, a prominent player in the Defence and Nuclear sector, is seeking a skilled Wiring/Assembly Tech for a contract role at their site in Wimborne. Due to the nature of the role, applicants must hold the sole British nationality. Fully onsite in Wimborne, Dorset. 16.71 p/h PAYE or 22.38 p/h Umbrella, inside IR35. 12 month contract. Key Responsibilities: Wiring complex assemblies using technical drawings, wiring/circuit diagrams, and work instructions Terminal installation Soldering high-density multi-pin connections Soldering surface mount devices Mechanical assembly of control cabinets, racks, frames, and associated metalwork Manufacture of cable looms Printed circuit board assembly and repair Repairs and modifications including upgrades in accordance with documented procedures Comprehensive checks on wired assemblies Ensuring all paperwork (hard and soft copy) and electronic systems including ERP is completed accurately to ensure traceability Maintaining good standards of housekeeping and cleanliness whilst complying with best health and safety practice, including ESD precautions Skills, Qualifications, and Experience: Academic qualification or practical experience in electrical assembly Previous assembly experience within a workshop manufacturing environment Excellent soldering skills including complex high-density connectors and surface mount devices Meticulous assembling skills Able to read and understand electrical drawings including wiring diagrams and PCB schematics Strong time management and ability to work unsupervised to defined deadlines Good communicator and team player Basic computer literacy, including experience with Microsoft Outlook, Word, and Excel Desired Skills: Existing qualification to IPC-A-610/620 would be an advantage Experience with COSHH Essential Functions: This role is based in the manufacturing facility and is not physically demanding, although some lifting of equipment will be required Ability to attain UKSV security clearance If you meet the above criteria and are looking for a challenging and rewarding opportunity in the Defence & Security, Nuclear, and Aerospace sectors, we encourage you to apply now. Join our client's dedicated team and contribute to critical projects.
Jun 16, 2026
Contractor
Our client, a prominent player in the Defence and Nuclear sector, is seeking a skilled Wiring/Assembly Tech for a contract role at their site in Wimborne. Due to the nature of the role, applicants must hold the sole British nationality. Fully onsite in Wimborne, Dorset. 16.71 p/h PAYE or 22.38 p/h Umbrella, inside IR35. 12 month contract. Key Responsibilities: Wiring complex assemblies using technical drawings, wiring/circuit diagrams, and work instructions Terminal installation Soldering high-density multi-pin connections Soldering surface mount devices Mechanical assembly of control cabinets, racks, frames, and associated metalwork Manufacture of cable looms Printed circuit board assembly and repair Repairs and modifications including upgrades in accordance with documented procedures Comprehensive checks on wired assemblies Ensuring all paperwork (hard and soft copy) and electronic systems including ERP is completed accurately to ensure traceability Maintaining good standards of housekeeping and cleanliness whilst complying with best health and safety practice, including ESD precautions Skills, Qualifications, and Experience: Academic qualification or practical experience in electrical assembly Previous assembly experience within a workshop manufacturing environment Excellent soldering skills including complex high-density connectors and surface mount devices Meticulous assembling skills Able to read and understand electrical drawings including wiring diagrams and PCB schematics Strong time management and ability to work unsupervised to defined deadlines Good communicator and team player Basic computer literacy, including experience with Microsoft Outlook, Word, and Excel Desired Skills: Existing qualification to IPC-A-610/620 would be an advantage Experience with COSHH Essential Functions: This role is based in the manufacturing facility and is not physically demanding, although some lifting of equipment will be required Ability to attain UKSV security clearance If you meet the above criteria and are looking for a challenging and rewarding opportunity in the Defence & Security, Nuclear, and Aerospace sectors, we encourage you to apply now. Join our client's dedicated team and contribute to critical projects.
Mechanical Fitter Cinderford, Gloucestershire 30,000 - 35,000 per annum + Overtime + Benefits Permanent Position We are currently looking for a Mechanical Technician to be responsible for building Special Purpose Equipment. In this job you will: Assemble and test Special Purpose Equipment. Meticulously build equipment in accordance with engineering drawings. Collaborate with the Quality Assurance engineers to promptly address any assembly issues. Work as a team. About You: City & Guilds Qualified / Apprentice Trained Engineering Qualification Team Player For more information, please contact Rory McStay
Jun 16, 2026
Full time
Mechanical Fitter Cinderford, Gloucestershire 30,000 - 35,000 per annum + Overtime + Benefits Permanent Position We are currently looking for a Mechanical Technician to be responsible for building Special Purpose Equipment. In this job you will: Assemble and test Special Purpose Equipment. Meticulously build equipment in accordance with engineering drawings. Collaborate with the Quality Assurance engineers to promptly address any assembly issues. Work as a team. About You: City & Guilds Qualified / Apprentice Trained Engineering Qualification Team Player For more information, please contact Rory McStay
Our client, is currently seeking a Senior Highway Engineer to join their team on a contract basis. This role offers you the opportunity to work on a variety of significant highways, bridges, and infrastructure projects across the County alongside a highly collaborative and multi-disciplinary team. Key Responsibilities: Developing highway designs on multi-disciplinary projects through various stages of the project lifecycle. Ensuring projects are delivered to programme, budget, technical standards, and legal requirements. Providing guidance and support to junior engineers and technicians, contributing to their professional development. Assisting Project Managers with planning, programming, technical input, pricing of project briefs, proposals, and cost estimation. Preparing and reviewing design documentation, drawings, reports, and technical submissions. Working across a portfolio of varied multi-disciplinary projects simultaneously. Coordinating with engineering and technician resources to deliver work packages effectively. Collaborating with clients, stakeholders, and internal teams to ensure successful project delivery. Supporting site-based activities on an ad hoc basis, including supervision and monitoring contractor compliance with contract requirements. Job Requirements: Passion for design and a drive to develop innovative, practical engineering solutions. Degree in Civil Engineering or equivalent experience within a highway design environment. Chartered Engineer preferred or working towards IEng or CEng status with a relevant professional institution. Experience in multidisciplinary highway design across different project stages. Technical knowledge in areas such as road geometry, junction design, active travel schemes, drainage systems, road restraint systems, and traffic signs/road markings. Familiarity with relevant design standards including DMRB, Manual for Streets, TSRGD, and Local Authority guidance, including experience preparing drawings for Technical Approvals and Departures from Standards. Proficiency in relevant design software such as Autodesk Civil 3D, Bentley OpenRoads Designer, InfoDrainage and/or PDS. Understanding of Designer's Duties under CDM regulations. If you are an experienced Senior Highway Engineer looking to take the next step in your career, we would love to hear from you.
Jun 15, 2026
Contractor
Our client, is currently seeking a Senior Highway Engineer to join their team on a contract basis. This role offers you the opportunity to work on a variety of significant highways, bridges, and infrastructure projects across the County alongside a highly collaborative and multi-disciplinary team. Key Responsibilities: Developing highway designs on multi-disciplinary projects through various stages of the project lifecycle. Ensuring projects are delivered to programme, budget, technical standards, and legal requirements. Providing guidance and support to junior engineers and technicians, contributing to their professional development. Assisting Project Managers with planning, programming, technical input, pricing of project briefs, proposals, and cost estimation. Preparing and reviewing design documentation, drawings, reports, and technical submissions. Working across a portfolio of varied multi-disciplinary projects simultaneously. Coordinating with engineering and technician resources to deliver work packages effectively. Collaborating with clients, stakeholders, and internal teams to ensure successful project delivery. Supporting site-based activities on an ad hoc basis, including supervision and monitoring contractor compliance with contract requirements. Job Requirements: Passion for design and a drive to develop innovative, practical engineering solutions. Degree in Civil Engineering or equivalent experience within a highway design environment. Chartered Engineer preferred or working towards IEng or CEng status with a relevant professional institution. Experience in multidisciplinary highway design across different project stages. Technical knowledge in areas such as road geometry, junction design, active travel schemes, drainage systems, road restraint systems, and traffic signs/road markings. Familiarity with relevant design standards including DMRB, Manual for Streets, TSRGD, and Local Authority guidance, including experience preparing drawings for Technical Approvals and Departures from Standards. Proficiency in relevant design software such as Autodesk Civil 3D, Bentley OpenRoads Designer, InfoDrainage and/or PDS. Understanding of Designer's Duties under CDM regulations. If you are an experienced Senior Highway Engineer looking to take the next step in your career, we would love to hear from you.
About the role This is a rare and exciting opportunity to contribute to a once-in-a-generation exhibition centred on the Bayeux Tapestry - one of the world's most iconic and historically significant works. As part of this landmark project, you will play a key role in supporting and maintaining the AV infrastructure that brings the exhibition to life, helping to create an immersive and memorable experience for visitors. We are looking for enthusiastic AV technicians who are motivated by the opportunity to work on a high-profile, culturally significant exhibition and ensure its technical delivery runs seamlessly. About you You have hands-on experience of setting up, operating, and troubleshooting AV equipment, with a strong interest in live events and exhibition environments You are a confident communicator, able to explain technical information clearly to non-technical colleagues and build effective working relationships You remain calm under pressure, able to prioritise tasks and respond flexibly in a fast-paced and sometimes reactive environment You are proactive and self-motivated, with a willingness to learn and continuously develop your technical skills on the job Key areas of responsibility Operate and support AV facilities across live events, exhibitions, galleries, and meeting spaces Provide first-line technical support, troubleshooting AV equipment and systems to ensure seamless delivery Contribute to AV projects, including design, installation, maintenance, and de-installation for exhibitions and gallery spaces Support the setup and delivery of live and hybrid events, including digital streaming and technical coordination Work collaboratively with stakeholders across the Museum to understand requirements, manage AV assets, and continuously improve services The Masterplan The British Museum is undertaking its biggest transformation since its founding nearly 300 years ago. This physical and intellectual transformation includes large scale building and gallery transformation, new ways of connecting with audiences and different ways of working. As we look towards this exciting future, we remain guided by the words of our founder Hans Sloane - who dreamed of a museum connecting all arts and sciences, which would be accessible to everyone, everywhere.
Jun 15, 2026
Full time
About the role This is a rare and exciting opportunity to contribute to a once-in-a-generation exhibition centred on the Bayeux Tapestry - one of the world's most iconic and historically significant works. As part of this landmark project, you will play a key role in supporting and maintaining the AV infrastructure that brings the exhibition to life, helping to create an immersive and memorable experience for visitors. We are looking for enthusiastic AV technicians who are motivated by the opportunity to work on a high-profile, culturally significant exhibition and ensure its technical delivery runs seamlessly. About you You have hands-on experience of setting up, operating, and troubleshooting AV equipment, with a strong interest in live events and exhibition environments You are a confident communicator, able to explain technical information clearly to non-technical colleagues and build effective working relationships You remain calm under pressure, able to prioritise tasks and respond flexibly in a fast-paced and sometimes reactive environment You are proactive and self-motivated, with a willingness to learn and continuously develop your technical skills on the job Key areas of responsibility Operate and support AV facilities across live events, exhibitions, galleries, and meeting spaces Provide first-line technical support, troubleshooting AV equipment and systems to ensure seamless delivery Contribute to AV projects, including design, installation, maintenance, and de-installation for exhibitions and gallery spaces Support the setup and delivery of live and hybrid events, including digital streaming and technical coordination Work collaboratively with stakeholders across the Museum to understand requirements, manage AV assets, and continuously improve services The Masterplan The British Museum is undertaking its biggest transformation since its founding nearly 300 years ago. This physical and intellectual transformation includes large scale building and gallery transformation, new ways of connecting with audiences and different ways of working. As we look towards this exciting future, we remain guided by the words of our founder Hans Sloane - who dreamed of a museum connecting all arts and sciences, which would be accessible to everyone, everywhere.
We are currently recruiting an Enhanced Technician / Senior Operator / Assistant Shift Team Leader /SAP to join the operations department of a large Energy from Waste plant in Kent. The Enhanced Technician will need an adaptable approach and will be responsible for supervising the shift teams ensuring the safe and efficient operation of the plant. The Enhanced Technician will be required, on occasions, to step up to the full Shift Manager role to cover for periods of sickness and holidays. If you have the relevant experience (please see below) and are looking for a rewarding role in the Power sector, then please apply. Responsibilities and duties of the Enhanced Technician role Reporting to the Operations Manager you will be responsible for: The day-to-day support of the Shift Team, including supervision of Shift Technicians who will be responsible for the safe and efficient operation of turbines, boilers, pumps and water treatment plant. Acting as the site Senior Authorised Person complying with the sites safe systems of work. Ensuring the plant is operating within its parameters whilst complying with strict HSE rules and regulations as well as company policies and procedures. Providing technical supervision and assistance where necessary for company and contract staff engaged in work. Carrying out return to work discussions with team members returning from periods of absence. Working within the Company Health & Safety, Environmental and Quality Systems. Professional qualifications We are looking for someone with the following: Ideally a relevant technical qualification such as a C&G / NVQ / ONC / HNC in an engineering discipline Ideally an IOSH or NEBOSH qualification Ideally qualified as a Senior Authorised Person / SAP working with High Voltage electrical equipment Personal skills The Enhanced Technician role would suit someone who is: At least 5 years' experience in an operational environment on a power station or heavy process facility with steam raising plant e.g. EFW. biomass, coal, utilities etc. Ex-Military Engineers with management/leadership experience will also be considered - Navy, REME, RAF, RFA etc Experience with Electrical Safety at Work such as HV Switching, Earthing & Isolations Salary and benefits of the Enhanced Technician role Industry competitive salary up to 63,000 per year Health Care plan Pension matched up to 6% Bonus opportunity up to 12% Further full company benefits INDPOW Astute People are acting as an employment agency in relation to this vacancy. We do not discriminate on the grounds of age, race, gender, disability, creed or sexual orientation and comply with all relevant UK legislation. We encourage applications from individuals from all backgrounds but candidates must be able to demonstrate their ability to work in the UK. Astute is also committed to the government's Disability Confident Employer initiative. We endeavour to get back to everyone, however, if you have not heard anything after 7 days, please consider your application unsuccessful.
Jun 15, 2026
Full time
We are currently recruiting an Enhanced Technician / Senior Operator / Assistant Shift Team Leader /SAP to join the operations department of a large Energy from Waste plant in Kent. The Enhanced Technician will need an adaptable approach and will be responsible for supervising the shift teams ensuring the safe and efficient operation of the plant. The Enhanced Technician will be required, on occasions, to step up to the full Shift Manager role to cover for periods of sickness and holidays. If you have the relevant experience (please see below) and are looking for a rewarding role in the Power sector, then please apply. Responsibilities and duties of the Enhanced Technician role Reporting to the Operations Manager you will be responsible for: The day-to-day support of the Shift Team, including supervision of Shift Technicians who will be responsible for the safe and efficient operation of turbines, boilers, pumps and water treatment plant. Acting as the site Senior Authorised Person complying with the sites safe systems of work. Ensuring the plant is operating within its parameters whilst complying with strict HSE rules and regulations as well as company policies and procedures. Providing technical supervision and assistance where necessary for company and contract staff engaged in work. Carrying out return to work discussions with team members returning from periods of absence. Working within the Company Health & Safety, Environmental and Quality Systems. Professional qualifications We are looking for someone with the following: Ideally a relevant technical qualification such as a C&G / NVQ / ONC / HNC in an engineering discipline Ideally an IOSH or NEBOSH qualification Ideally qualified as a Senior Authorised Person / SAP working with High Voltage electrical equipment Personal skills The Enhanced Technician role would suit someone who is: At least 5 years' experience in an operational environment on a power station or heavy process facility with steam raising plant e.g. EFW. biomass, coal, utilities etc. Ex-Military Engineers with management/leadership experience will also be considered - Navy, REME, RAF, RFA etc Experience with Electrical Safety at Work such as HV Switching, Earthing & Isolations Salary and benefits of the Enhanced Technician role Industry competitive salary up to 63,000 per year Health Care plan Pension matched up to 6% Bonus opportunity up to 12% Further full company benefits INDPOW Astute People are acting as an employment agency in relation to this vacancy. We do not discriminate on the grounds of age, race, gender, disability, creed or sexual orientation and comply with all relevant UK legislation. We encourage applications from individuals from all backgrounds but candidates must be able to demonstrate their ability to work in the UK. Astute is also committed to the government's Disability Confident Employer initiative. We endeavour to get back to everyone, however, if you have not heard anything after 7 days, please consider your application unsuccessful.
Hartland Recruitment & Advertising Limited
City, Birmingham
I am looking for an ELECTRICAL ENGINEER or INSTRUMENTATION TECHNICIAN to join one of my growing customers in the Service Engineering team supporting instruments and electrical panels in West Midlands sites. The company is involved in the design, build and installation of electrical control panels and instrumentation panels which are used on various manufacturing and power, food, water, UK process industry sites, and the extra Technician would be responsible for WEST MIDLANDS sites - testing the panels, calibrating the process instruments on the site systems, sometimes installing new equipment. Electrical or Instrument Panel building, test, calibration, site service repair support experience would be ideal. OR industrial electrical experience 18th edition, ECS Gold Card, with a bit of control panel or process instrumentation or RTU / Telemetry would be a bonus. Location: Your sites will be based between Wales and the West Midlands, Coventry, Birmingham, so a home location somewhere in that area would be ideal. Rewards: Alongside a good basic salary and benefits (health/pension/holiday) package, there is a lot of opportunity to earn extra with paid overtime if you want to do it- the company is growing, there's always work to do. You'll get a company van to help you to do it. Please send a copy of your CV to Mark Burnard of Hartland Recruitment ASAP for more details. Hartland Recruitment - a technical recruitment company specialising in finding Engineers for the UK Factory Automation, Process Control Systems and Machinery Manufacturers since 1990. Looking for your next job in Electrical, Mechanical Design, Service Commissioning Engineering, or PLC HMI SCADA control? Send me your CV.
Jun 15, 2026
Full time
I am looking for an ELECTRICAL ENGINEER or INSTRUMENTATION TECHNICIAN to join one of my growing customers in the Service Engineering team supporting instruments and electrical panels in West Midlands sites. The company is involved in the design, build and installation of electrical control panels and instrumentation panels which are used on various manufacturing and power, food, water, UK process industry sites, and the extra Technician would be responsible for WEST MIDLANDS sites - testing the panels, calibrating the process instruments on the site systems, sometimes installing new equipment. Electrical or Instrument Panel building, test, calibration, site service repair support experience would be ideal. OR industrial electrical experience 18th edition, ECS Gold Card, with a bit of control panel or process instrumentation or RTU / Telemetry would be a bonus. Location: Your sites will be based between Wales and the West Midlands, Coventry, Birmingham, so a home location somewhere in that area would be ideal. Rewards: Alongside a good basic salary and benefits (health/pension/holiday) package, there is a lot of opportunity to earn extra with paid overtime if you want to do it- the company is growing, there's always work to do. You'll get a company van to help you to do it. Please send a copy of your CV to Mark Burnard of Hartland Recruitment ASAP for more details. Hartland Recruitment - a technical recruitment company specialising in finding Engineers for the UK Factory Automation, Process Control Systems and Machinery Manufacturers since 1990. Looking for your next job in Electrical, Mechanical Design, Service Commissioning Engineering, or PLC HMI SCADA control? Send me your CV.
About the Company: A global manufacturing business with 4 manufacturing sites across the UK. Main Responsibilities: Build systems, sub-assemblies and piece parts for complex systems to required quality and ISO standards Ensure BOM and customer specification requirements are met Identify and resolve build issues efficiently Report technical issues via the FRACAS process Maintain technical competence through ongoing training Provide build sequence guidance and support to the team Mentor and train junior technicians Promote high standards of build cleanliness, housekeeping, and health & safety (including supporting 5S initiatives) Contribute to continuous improvement and production team performance Work in accordance with the rotating shift schedule provided by the Team Leader Essential Requirements: Experience building electrical systems, ideally for complex/special-purpose machinery Strong background in electrical wiring, including panel building Able to read and interpret electrical schematics Hands-on experience with: Control panels MCBs, contactors, relays Inverter drives and PLCs Cable crimping, soldering, and termination Excellent attention to detail and fault-finding ability Commitment to high-quality build standards Desirable Qualifications: Electrical Engineering Apprenticeship 16th/17th Edition Electrical qualification HNC/HND in Electrical/Electronic Engineering City & Guilds in Electrical/Electronic Engineering Other relevant electrical qualifications Benefits: Competitive Salary Structured career development opportunities Good work-life balance Private healthcare Share plan incentive 25 days annual leave Defined contribution Group Personal Pension Plan Flexible benefits package Current Shift Times: Early: 06:00 - 14:00 (Mon-Thurs) Afternoon: 14:00 - 22:00 (Mon-Thurs) Friday: 06:00 - 11:00 and 11:00 - 16:00
Jun 15, 2026
Full time
About the Company: A global manufacturing business with 4 manufacturing sites across the UK. Main Responsibilities: Build systems, sub-assemblies and piece parts for complex systems to required quality and ISO standards Ensure BOM and customer specification requirements are met Identify and resolve build issues efficiently Report technical issues via the FRACAS process Maintain technical competence through ongoing training Provide build sequence guidance and support to the team Mentor and train junior technicians Promote high standards of build cleanliness, housekeeping, and health & safety (including supporting 5S initiatives) Contribute to continuous improvement and production team performance Work in accordance with the rotating shift schedule provided by the Team Leader Essential Requirements: Experience building electrical systems, ideally for complex/special-purpose machinery Strong background in electrical wiring, including panel building Able to read and interpret electrical schematics Hands-on experience with: Control panels MCBs, contactors, relays Inverter drives and PLCs Cable crimping, soldering, and termination Excellent attention to detail and fault-finding ability Commitment to high-quality build standards Desirable Qualifications: Electrical Engineering Apprenticeship 16th/17th Edition Electrical qualification HNC/HND in Electrical/Electronic Engineering City & Guilds in Electrical/Electronic Engineering Other relevant electrical qualifications Benefits: Competitive Salary Structured career development opportunities Good work-life balance Private healthcare Share plan incentive 25 days annual leave Defined contribution Group Personal Pension Plan Flexible benefits package Current Shift Times: Early: 06:00 - 14:00 (Mon-Thurs) Afternoon: 14:00 - 22:00 (Mon-Thurs) Friday: 06:00 - 11:00 and 11:00 - 16:00
