Quality Inspector Location: Dewsbury, commutable from Leeds, Wakefield, Huddersfield, Bradford Hourly Rate: 18.53 Temp to Perm after 18 weeks. Excellent employee benefits once permanent The Quality Inspector Role We are looking for a proactive and detail driven Quality Inspector to support inspection, verification and compliance activities across our client's manufacturing operations. You will play a key role in ensuring assemblies, pipework, mechanical systems and modular units meet required specifications, standards and customer expectations. This role is ideal for someone with strong mechanical inspection experience, excellent attention to detail and a passion for driving quality across all stages of production. Quality Inspector Responsibilities Health & Safety Promote a safety first culture and follow all HSE procedures. Identify and report hazards, unsafe conditions and near misses. Quality Control Perform in process and final inspections during assembly. Complete release checks and ensure compliance with specifications. Use Snag R to record defects and verify corrective actions. Support Safe to Despatch checks and produce inspection evidence. Inspection & Test Plans Execute inspection activities in line with ITPs, including witness and hold points. Validate hydrotest evidence, dimensional checks, visual inspections and functional tests. Record all inspection results using approved templates. Maintain full traceability of components and inspection records. Non Conformance & Corrective Action Identify defects and raise NCRs in line with QMS requirements. Verify repairs/rework meet acceptance criteria. Support engineers and QA teams with mechanical root cause investigations. Compliance & Documentation Maintain accurate inspection documentation and quality records. Support production of Quality Packs and ensure evidence completeness. Follow correct document control practices for drawings and revisions. Stakeholder Relations Work collaboratively with production, engineering and QA teams. Provide clear feedback on inspection findings to prevent recurrence. Promote quality awareness across all manufacturing operations. Continuous Improvement Contribute to CI initiatives and defect reduction activities. Provide input for Lessons Learned / LFE cycles. Quality Inspector Experience Essential Inspection experience within fabrication, modular construction, pipework installation, industrial build or similar. Strong understanding of tolerances and high quality standards. Desirable Experience with pressure testing, hydrotesting or mechanical test procedures. Experience working within an ISO 9001 environment. Experience of offsite manufacturing. Quality Inspector Qualifications NVQ Level 3 Mechanical, mechanical engineering apprenticeship or similar. ISO 9001 Lead/Internal Auditor qualification (desirable) Membership of a recognised engineering or quality institution (desirable) Internal inspection competency training. Product or process specific mechanical assembly training. Apply now for this great opportunity to work with an employer of choice, offering training and development. Kinetic plc is a Recruitment Consultancy with over 40 years of experience of delivering staffing solutions to the engineering, manufacturing and technical industries. Kinetic plc treats all applications with a high degree of care, we review all submissions and will attempt to contact applicants who match the job profile. Those that do not meet the specification may not be contacted but their CV retained to be considered against future opportunities.
Jun 10, 2026
Seasonal
Quality Inspector Location: Dewsbury, commutable from Leeds, Wakefield, Huddersfield, Bradford Hourly Rate: 18.53 Temp to Perm after 18 weeks. Excellent employee benefits once permanent The Quality Inspector Role We are looking for a proactive and detail driven Quality Inspector to support inspection, verification and compliance activities across our client's manufacturing operations. You will play a key role in ensuring assemblies, pipework, mechanical systems and modular units meet required specifications, standards and customer expectations. This role is ideal for someone with strong mechanical inspection experience, excellent attention to detail and a passion for driving quality across all stages of production. Quality Inspector Responsibilities Health & Safety Promote a safety first culture and follow all HSE procedures. Identify and report hazards, unsafe conditions and near misses. Quality Control Perform in process and final inspections during assembly. Complete release checks and ensure compliance with specifications. Use Snag R to record defects and verify corrective actions. Support Safe to Despatch checks and produce inspection evidence. Inspection & Test Plans Execute inspection activities in line with ITPs, including witness and hold points. Validate hydrotest evidence, dimensional checks, visual inspections and functional tests. Record all inspection results using approved templates. Maintain full traceability of components and inspection records. Non Conformance & Corrective Action Identify defects and raise NCRs in line with QMS requirements. Verify repairs/rework meet acceptance criteria. Support engineers and QA teams with mechanical root cause investigations. Compliance & Documentation Maintain accurate inspection documentation and quality records. Support production of Quality Packs and ensure evidence completeness. Follow correct document control practices for drawings and revisions. Stakeholder Relations Work collaboratively with production, engineering and QA teams. Provide clear feedback on inspection findings to prevent recurrence. Promote quality awareness across all manufacturing operations. Continuous Improvement Contribute to CI initiatives and defect reduction activities. Provide input for Lessons Learned / LFE cycles. Quality Inspector Experience Essential Inspection experience within fabrication, modular construction, pipework installation, industrial build or similar. Strong understanding of tolerances and high quality standards. Desirable Experience with pressure testing, hydrotesting or mechanical test procedures. Experience working within an ISO 9001 environment. Experience of offsite manufacturing. Quality Inspector Qualifications NVQ Level 3 Mechanical, mechanical engineering apprenticeship or similar. ISO 9001 Lead/Internal Auditor qualification (desirable) Membership of a recognised engineering or quality institution (desirable) Internal inspection competency training. Product or process specific mechanical assembly training. Apply now for this great opportunity to work with an employer of choice, offering training and development. Kinetic plc is a Recruitment Consultancy with over 40 years of experience of delivering staffing solutions to the engineering, manufacturing and technical industries. Kinetic plc treats all applications with a high degree of care, we review all submissions and will attempt to contact applicants who match the job profile. Those that do not meet the specification may not be contacted but their CV retained to be considered against future opportunities.
Goods Inwards Inspector 12 month contract Based in Stevenage Offering 28.71ph Inside IR35 Do you have goods in inspection experience? Do you have experience with SAP? Do you want to work with an industry-leading company? If your answer to these is yes, then this could be the role for you! As the Goods Inwards Inspector, you will be working alongside a market-leading Defence and Aerospace company who are constantly growing and developing. They are always looking to bring on new talents such as yourself and further develop your skills to enable you to grow within the company and industry. You will be involved in: Ensuring that goods received from suppliers meet the criteria of the purchase order and are compliant in all respects. Verify and accept procured products in line with contractual conditions. Practiced in reading and understanding assembly drawings with due regard to dimensional tolerances and machining. Examining the finish of all parts to detect faulty finishing or painting, deterioration of surfaces etc. Undertaking first-off inspections. Produce relevant inspection/quality control documentation. Check and complete all paperwork associated with the delivered article. Ensure inspection times are met. Control defect items via segregation from good products. Raise and maintain relevant defect reports. Maintain product verification approval process via regular audits. Inspection of PCB Ensure compliance with all associated procedures applicable to the manufacturing process. Your Skillset may include: Formal technical engineering/craft apprenticeship to NVQ Level 3/TR23/TR21 or HNC. SAP literate If this all sounds like something you will be interested in then simply apply and we can discuss the opportunity further! Goods Inwards Inspector 12 month contract Based in Stevenage Offering 28.71ph Inside IR35 Disclaimer: This vacancy is being advertised by either Advanced Resource Managers Limited, Advanced Resource Managers IT Limited or Advanced Resource Managers Engineering Limited ("ARM"). ARM is a specialist talent acquisition and management consultancy. We provide technical contingency recruitment and a portfolio of more complex resource solutions. Our specialist recruitment divisions cover the entire technical arena, including some of the most economically and strategically important industries in the UK and the world today. We will never send your CV without your permission. Where the role is marked as Outside IR35 in the advertisement this is subject to receipt of a final Status Determination Statement from the end Client and may be subject to change.
Jun 05, 2026
Contractor
Goods Inwards Inspector 12 month contract Based in Stevenage Offering 28.71ph Inside IR35 Do you have goods in inspection experience? Do you have experience with SAP? Do you want to work with an industry-leading company? If your answer to these is yes, then this could be the role for you! As the Goods Inwards Inspector, you will be working alongside a market-leading Defence and Aerospace company who are constantly growing and developing. They are always looking to bring on new talents such as yourself and further develop your skills to enable you to grow within the company and industry. You will be involved in: Ensuring that goods received from suppliers meet the criteria of the purchase order and are compliant in all respects. Verify and accept procured products in line with contractual conditions. Practiced in reading and understanding assembly drawings with due regard to dimensional tolerances and machining. Examining the finish of all parts to detect faulty finishing or painting, deterioration of surfaces etc. Undertaking first-off inspections. Produce relevant inspection/quality control documentation. Check and complete all paperwork associated with the delivered article. Ensure inspection times are met. Control defect items via segregation from good products. Raise and maintain relevant defect reports. Maintain product verification approval process via regular audits. Inspection of PCB Ensure compliance with all associated procedures applicable to the manufacturing process. Your Skillset may include: Formal technical engineering/craft apprenticeship to NVQ Level 3/TR23/TR21 or HNC. SAP literate If this all sounds like something you will be interested in then simply apply and we can discuss the opportunity further! Goods Inwards Inspector 12 month contract Based in Stevenage Offering 28.71ph Inside IR35 Disclaimer: This vacancy is being advertised by either Advanced Resource Managers Limited, Advanced Resource Managers IT Limited or Advanced Resource Managers Engineering Limited ("ARM"). ARM is a specialist talent acquisition and management consultancy. We provide technical contingency recruitment and a portfolio of more complex resource solutions. Our specialist recruitment divisions cover the entire technical arena, including some of the most economically and strategically important industries in the UK and the world today. We will never send your CV without your permission. Where the role is marked as Outside IR35 in the advertisement this is subject to receipt of a final Status Determination Statement from the end Client and may be subject to change.
Nottingham Community Housing Association
Nottingham, Nottinghamshire
Non-Executive Board Member Nottingham £6,782.00 per annum Do you want to be a voice for change? If so, join our Board as a Non-Executive Board Member and help shape change at NCHA. About Us A force for good in the East Midlands for over 50 years, NCHA s mission is to provide homes and support by people who care. We house more than 20,000 people and manage over 10,000 homes in Nottinghamshire, Derbyshire, Lincolnshire, Leicestershire, Northamptonshire and Rutland. We employ over 1,300 people, who receive training opportunities, apprenticeships and a huge range of colleague benefits. We re building new homes all the time and work with 19 local authorities to build affordable homes that meet the needs of people in their area. This includes homes for sale, rent, shared ownership and everything in between. We ve got an annual turnover of £100 million, and we have invested more than £800 million in properties. But we don t just do houses - we also provide a range of care and support services all over our region. About our Board and the roles NCHA strives to be an inclusive workplace and we particularly welcome applicants from ethnic minority communities, LGBTQ+ communities, women and people with disabilities to ensure we fully represent our communities. As we also value diversity in experience and sector, we review the make-up of our Board annually to ensure we ve got the right representation to enable us to continue to make the right decisions for our customers, colleagues and the organisation as a whole. And this is where you come in. What we re looking for: You will have current or very recent experience within a regulated, property-based Adult Social Care organisation (for example, supported living or care home services), potentially gained as a Quality Lead, Registered Manager, Commissioner, Inspector, or in a similar role. As well as in-person attendance at our Board meetings and strategic awayday, you will be required to be a member of one of NCHA s separate committees. In total, your obligation will be around 12 meetings a year, plus additional time for reviewing documents. All applicants should be enthusiastic team players with links to the East Midlands who share our CLEAR values, have a passion for housing and social care, and are looking for a Non-Executive Board Member role with a socially conscious Housing Association. You will work as part of a team and be collectively responsible for ensuring the success of NCHA, and its compliance with all legal and regulatory obligations. You will contribute to setting our strategic aims and take key strategic decisions about future development; whilst providing entrepreneurial leadership and oversight across the NCHA Group; including playing a part in managing the Chief Executive and executive management team. Finally, you will accept the legal duties, responsibilities and liabilities of Board Membership including meeting the fit and proper persons test under the Health and Social Care Act 2008 (Regulated Activities) Regulations 2014. What s in it for you? Training and support towards your personal development A chance to expand your existing Board skills Opportunities to network as you would be representing NCHA externally when required IT equipment provided Remuneration: £6,782.00 per annum If you ve got a passion for what we do, please click APPLY now and be assured that you will be joining a successful Board and contributing to our vision of More Homes, Great Services, Better Lives . We are looking forward to receiving your application! Save the dates By midnight on 22nd June - Applications close for the role By 8th July 2026 - Completion of Personality Questionnaire (if shortlisted) By 10th July 2026 - In-person interviews at
Jun 05, 2026
Full time
Non-Executive Board Member Nottingham £6,782.00 per annum Do you want to be a voice for change? If so, join our Board as a Non-Executive Board Member and help shape change at NCHA. About Us A force for good in the East Midlands for over 50 years, NCHA s mission is to provide homes and support by people who care. We house more than 20,000 people and manage over 10,000 homes in Nottinghamshire, Derbyshire, Lincolnshire, Leicestershire, Northamptonshire and Rutland. We employ over 1,300 people, who receive training opportunities, apprenticeships and a huge range of colleague benefits. We re building new homes all the time and work with 19 local authorities to build affordable homes that meet the needs of people in their area. This includes homes for sale, rent, shared ownership and everything in between. We ve got an annual turnover of £100 million, and we have invested more than £800 million in properties. But we don t just do houses - we also provide a range of care and support services all over our region. About our Board and the roles NCHA strives to be an inclusive workplace and we particularly welcome applicants from ethnic minority communities, LGBTQ+ communities, women and people with disabilities to ensure we fully represent our communities. As we also value diversity in experience and sector, we review the make-up of our Board annually to ensure we ve got the right representation to enable us to continue to make the right decisions for our customers, colleagues and the organisation as a whole. And this is where you come in. What we re looking for: You will have current or very recent experience within a regulated, property-based Adult Social Care organisation (for example, supported living or care home services), potentially gained as a Quality Lead, Registered Manager, Commissioner, Inspector, or in a similar role. As well as in-person attendance at our Board meetings and strategic awayday, you will be required to be a member of one of NCHA s separate committees. In total, your obligation will be around 12 meetings a year, plus additional time for reviewing documents. All applicants should be enthusiastic team players with links to the East Midlands who share our CLEAR values, have a passion for housing and social care, and are looking for a Non-Executive Board Member role with a socially conscious Housing Association. You will work as part of a team and be collectively responsible for ensuring the success of NCHA, and its compliance with all legal and regulatory obligations. You will contribute to setting our strategic aims and take key strategic decisions about future development; whilst providing entrepreneurial leadership and oversight across the NCHA Group; including playing a part in managing the Chief Executive and executive management team. Finally, you will accept the legal duties, responsibilities and liabilities of Board Membership including meeting the fit and proper persons test under the Health and Social Care Act 2008 (Regulated Activities) Regulations 2014. What s in it for you? Training and support towards your personal development A chance to expand your existing Board skills Opportunities to network as you would be representing NCHA externally when required IT equipment provided Remuneration: £6,782.00 per annum If you ve got a passion for what we do, please click APPLY now and be assured that you will be joining a successful Board and contributing to our vision of More Homes, Great Services, Better Lives . We are looking forward to receiving your application! Save the dates By midnight on 22nd June - Applications close for the role By 8th July 2026 - Completion of Personality Questionnaire (if shortlisted) By 10th July 2026 - In-person interviews at
Electrician / Electrical Inspector (CompEx) Excellent opportunity for an Electrician / Electrical Inspector (CompEx) carrying out ATEX inspections, electrical installation, fault finding, electrical rectifications and EC&I work across oil & gas, pharmaceutical, chemical, manufacturing and process industry environments. If you've also worked in the following roles, we'd also like to hear from you: ATEX Inspector, Field Service Engineer, Hazardous Area Electrician, Instrumentation Technician, Electrical Technician, CompEx Inspector, CompEx Electrician, Hazardous Area Inspector, EC&I Technician, EC&I Engineer SALARY: Up to £55,000 per annum (dependent on qualifications and experience) + Car + Benefits LOCATION: Field based across the North West. However, candidates based within the M60 would be favourable due to the client base. JOB TYPE: Full-Time, Permanent JOB OVERVIEW The company continues to expand its Field Service Team, creating an exciting opportunity for a CompEx Electrical Inspector / Electrician to join a forward-thinking organisation delivering specialist EC&I and engineering solutions to customers across multiple process industries. As a CompEx Electrical Inspector / Electrician you will conduct hazardous area inspections, complete ATEX assessments, undertake electrical installation work, fault finding and electrical rectifications, and support instrumentation activities across aerospace, food, beverage, pharmaceutical, chemical and oil & gas sectors. You will work with containment systems, cable installations, electrical wiring diagrams and area classification reports to ensure compliance and operational safety. The CompEx Electrical Inspector / Electrician will play an important role in delivering inspection services in accordance with IEC / BS EN 60079 standards while helping improve reliability, minimise downtime and maintain safe customer operations across the UK and EU. APPLY TODAY Ready to make your next career move? Apply Now for our Recruitment Team to review. DUTIES Your duties as the CompEx Electrical Inspector / Electrician include: ATEX Inspections: conduct detailed ATEX and CompEx inspections to IEC / BS EN 60079-17 standards Electrical Inspection: identify non-compliances and ensure hazardous area equipment meets required standards Electrical Rectifications: complete high-quality electrical repairs and corrective work to minimise downtime Inspection Reporting: produce accurate reports and communicate findings and risks clearly Documentation Preparation: create comprehensive handover documentation following site inspections Containment Installation: install containment and cable systems to a high standard Electrical Installation: undertake electrical installation work safely and efficiently Technical Interpretation: work from electrical wiring diagrams and area classification reports Instrumentation Support: support instrumentation installation and shutdown projects when required Project Delivery: manage work schedules effectively and deliver work within agreed timescales Continuous Improvement: identify recurring issues and contribute to improved inspection processes Client Relationships: collaborate with customers and internal teams to improve compliance and safety outcomes CANDIDATE REQUIREMENTS ESSENTIAL Current CompEx EX01-04 qualification C&G 2391, 2391-52, or 2394 and 2395 qualification JIB Gold Card or higher with recognised apprenticeship or equivalent Electrician qualification Strong understanding of BS EN 60079-14 and BS EN 60079-17 Proven experience conducting ATEX inspections and producing high-quality reports Experience with glanding, terminating, containment installation and cable systems Proficient in interpreting electrical wiring diagrams and area classification reports Competent using Microsoft Excel, SharePoint and Microsoft 365 Willing to travel throughout the UK and EU including overnight stays Full UK driving licence required Able to develop effective customer relationships and communicate clearly DESIRABLE CompEx EX05-06 qualification Valid CCSNG, JIB or equivalent accreditation Previous experience within a service or field-based engineering environment BENEFITS A base salary of up to £55k dependent on qualifications and experience Fully funded car and tech Fuel card, including allowances for breakfast, lunch and dinner when working away - zero out of pocket expenses here! Paid overnight allowance, every night you spend working away Employee Training Company Events Modern open plan office Free Gym membership within walking distance to HQ Company pension package to secure your future Total holiday package of 31 days Employer-sponsored office attire Employer funded Cash plan. Reimbursement for going to the opticians, dentist, physiotherapists and more! HOW TO APPLY To be considered for this job vacancy, please submit your CV to our Recruitment Team who will review your details. CV's of Job Applicants meeting this requirement will be submitted to our Client for consideration. By submitting your job application to us you are hereby giving us your express consent to submit your details to our Client for this purpose. JOB REF: AWDO-P14715 Full-Time, Permanent Jobs, Careers and Vacancies. Find a new job and work in Manchester, Greater Manchester, North West England. Multi-Job Board Advertising and CV Sourcing Recruitment Services provided by AWD online. AWD online specialise in sourcing candidates and advertising vacancies on multiple job boards for companies on a non-commission basis. AWD online operates as an employment agency. awd online
Jun 04, 2026
Full time
Electrician / Electrical Inspector (CompEx) Excellent opportunity for an Electrician / Electrical Inspector (CompEx) carrying out ATEX inspections, electrical installation, fault finding, electrical rectifications and EC&I work across oil & gas, pharmaceutical, chemical, manufacturing and process industry environments. If you've also worked in the following roles, we'd also like to hear from you: ATEX Inspector, Field Service Engineer, Hazardous Area Electrician, Instrumentation Technician, Electrical Technician, CompEx Inspector, CompEx Electrician, Hazardous Area Inspector, EC&I Technician, EC&I Engineer SALARY: Up to £55,000 per annum (dependent on qualifications and experience) + Car + Benefits LOCATION: Field based across the North West. However, candidates based within the M60 would be favourable due to the client base. JOB TYPE: Full-Time, Permanent JOB OVERVIEW The company continues to expand its Field Service Team, creating an exciting opportunity for a CompEx Electrical Inspector / Electrician to join a forward-thinking organisation delivering specialist EC&I and engineering solutions to customers across multiple process industries. As a CompEx Electrical Inspector / Electrician you will conduct hazardous area inspections, complete ATEX assessments, undertake electrical installation work, fault finding and electrical rectifications, and support instrumentation activities across aerospace, food, beverage, pharmaceutical, chemical and oil & gas sectors. You will work with containment systems, cable installations, electrical wiring diagrams and area classification reports to ensure compliance and operational safety. The CompEx Electrical Inspector / Electrician will play an important role in delivering inspection services in accordance with IEC / BS EN 60079 standards while helping improve reliability, minimise downtime and maintain safe customer operations across the UK and EU. APPLY TODAY Ready to make your next career move? Apply Now for our Recruitment Team to review. DUTIES Your duties as the CompEx Electrical Inspector / Electrician include: ATEX Inspections: conduct detailed ATEX and CompEx inspections to IEC / BS EN 60079-17 standards Electrical Inspection: identify non-compliances and ensure hazardous area equipment meets required standards Electrical Rectifications: complete high-quality electrical repairs and corrective work to minimise downtime Inspection Reporting: produce accurate reports and communicate findings and risks clearly Documentation Preparation: create comprehensive handover documentation following site inspections Containment Installation: install containment and cable systems to a high standard Electrical Installation: undertake electrical installation work safely and efficiently Technical Interpretation: work from electrical wiring diagrams and area classification reports Instrumentation Support: support instrumentation installation and shutdown projects when required Project Delivery: manage work schedules effectively and deliver work within agreed timescales Continuous Improvement: identify recurring issues and contribute to improved inspection processes Client Relationships: collaborate with customers and internal teams to improve compliance and safety outcomes CANDIDATE REQUIREMENTS ESSENTIAL Current CompEx EX01-04 qualification C&G 2391, 2391-52, or 2394 and 2395 qualification JIB Gold Card or higher with recognised apprenticeship or equivalent Electrician qualification Strong understanding of BS EN 60079-14 and BS EN 60079-17 Proven experience conducting ATEX inspections and producing high-quality reports Experience with glanding, terminating, containment installation and cable systems Proficient in interpreting electrical wiring diagrams and area classification reports Competent using Microsoft Excel, SharePoint and Microsoft 365 Willing to travel throughout the UK and EU including overnight stays Full UK driving licence required Able to develop effective customer relationships and communicate clearly DESIRABLE CompEx EX05-06 qualification Valid CCSNG, JIB or equivalent accreditation Previous experience within a service or field-based engineering environment BENEFITS A base salary of up to £55k dependent on qualifications and experience Fully funded car and tech Fuel card, including allowances for breakfast, lunch and dinner when working away - zero out of pocket expenses here! Paid overnight allowance, every night you spend working away Employee Training Company Events Modern open plan office Free Gym membership within walking distance to HQ Company pension package to secure your future Total holiday package of 31 days Employer-sponsored office attire Employer funded Cash plan. Reimbursement for going to the opticians, dentist, physiotherapists and more! HOW TO APPLY To be considered for this job vacancy, please submit your CV to our Recruitment Team who will review your details. CV's of Job Applicants meeting this requirement will be submitted to our Client for consideration. By submitting your job application to us you are hereby giving us your express consent to submit your details to our Client for this purpose. JOB REF: AWDO-P14715 Full-Time, Permanent Jobs, Careers and Vacancies. Find a new job and work in Manchester, Greater Manchester, North West England. Multi-Job Board Advertising and CV Sourcing Recruitment Services provided by AWD online. AWD online specialise in sourcing candidates and advertising vacancies on multiple job boards for companies on a non-commission basis. AWD online operates as an employment agency. awd online
An opportunity has arisen with my client for a Goods Inwards Inspector to join them on an initial 12 -month contract. As the Goods Inwards Inspector, you will ensure that goods received from suppliers meet the criteria of the purchase order and are compliant in all respects. Role: Goods Inwards Inspector Pay: 28.71 per hour via Umbrella Company Location: Stevenage Contract: 12 Months Hours: Monday - Friday, 37 hours per week Security Clearance: Security Cleared Responsibilities: Verify and accept procured product in line with contractual conditions. Practiced in reading and understanding assembly drawings with due regards to dimensional tolerances and machined. Examining the finish of all parts to detect faulty finishing or painting, deterioration of surfaces etc. Undertaking first off inspections. Produce relevant inspection/quality control documentation. Check and complete all paperwork associated with the delivered article. Ensure inspections times are met. Control defect items via segregation from good product. Raise and maintain relevant defect reports. Maintain product verification approval process via regular audits. Inspection of PCBs Ensure compliance with all associated procedures applicable to the manufacturing process. Maintain to the highest level, workmanship standards and product quality. Contribute to the maintenance of an orderly and safe working environment. Skillset/experience required: Formal technical engineering/craft apprenticeship to NVQ Level 3/TR23/TR21 or HNC. Formal further education certificate to HNC or equivalent certificate. The successful candidate should be a team player who is able to demonstrate customer focus. They should be adaptable to any work-related processes and working practices. Must have goods in inspection experience. Manual handling training. SAP literate is desirable. If you are interested in applying for this position and you meet the requirements, please send your updated CV to: Natalie Dalkin at Line Up Aviation Line Up Aviation has carved its own place in the recruitment of Aviation and Aerospace personnel all over the world for more than 30 years. We work with some of the industry's best-known companies who demand the highest standard of applicants. " on Twitter for all of our latest vacancies, news and pictures from our busy UK Head Office. Interact with us using the tag at anytime! Thank you for your follow!"
Jun 04, 2026
Contractor
An opportunity has arisen with my client for a Goods Inwards Inspector to join them on an initial 12 -month contract. As the Goods Inwards Inspector, you will ensure that goods received from suppliers meet the criteria of the purchase order and are compliant in all respects. Role: Goods Inwards Inspector Pay: 28.71 per hour via Umbrella Company Location: Stevenage Contract: 12 Months Hours: Monday - Friday, 37 hours per week Security Clearance: Security Cleared Responsibilities: Verify and accept procured product in line with contractual conditions. Practiced in reading and understanding assembly drawings with due regards to dimensional tolerances and machined. Examining the finish of all parts to detect faulty finishing or painting, deterioration of surfaces etc. Undertaking first off inspections. Produce relevant inspection/quality control documentation. Check and complete all paperwork associated with the delivered article. Ensure inspections times are met. Control defect items via segregation from good product. Raise and maintain relevant defect reports. Maintain product verification approval process via regular audits. Inspection of PCBs Ensure compliance with all associated procedures applicable to the manufacturing process. Maintain to the highest level, workmanship standards and product quality. Contribute to the maintenance of an orderly and safe working environment. Skillset/experience required: Formal technical engineering/craft apprenticeship to NVQ Level 3/TR23/TR21 or HNC. Formal further education certificate to HNC or equivalent certificate. The successful candidate should be a team player who is able to demonstrate customer focus. They should be adaptable to any work-related processes and working practices. Must have goods in inspection experience. Manual handling training. SAP literate is desirable. If you are interested in applying for this position and you meet the requirements, please send your updated CV to: Natalie Dalkin at Line Up Aviation Line Up Aviation has carved its own place in the recruitment of Aviation and Aerospace personnel all over the world for more than 30 years. We work with some of the industry's best-known companies who demand the highest standard of applicants. " on Twitter for all of our latest vacancies, news and pictures from our busy UK Head Office. Interact with us using the tag at anytime! Thank you for your follow!"
On behalf of our client, we are seeking to recruit a Technical Incoming Inspector on an initial 5-month contract. Role: Technical Incoming Inspector Pay: 31.90 per hour via umbrella Location: Belfast Contract: Monday - Friday, 36 hours per week, 5 months contract IR35 Status: Inside Security Clearance : BPSS Responsibilities Carrying out Inspection, Quality Control and Quality Assurance Functions. Ensuring product compliance with design specification, customer and approving authority requirements and regulations. Providing instruction and advice to operators as and when required. Monitoring the Delegated Operator Scheme. Working flexibly in groups. Writing technical reports to highlight drawing, process and tooling anomalies to instigate investigation and corrective action. Essential & Desirable Skills: Candidates must be familiar with quality control requirements. The ability to interpret drawings and specifications, and to communicate effectively is essential. Candidates must be able to demonstrate a knowledge of Company manufacturing and assembly practices, requirements and standards An ONC/ A levels or equivalent qualifications is desirable. A knowledge of 3D metrology would be desirable. A recognised electrical or mechanical apprenticeship and have a minimum of 2 years' relevant post apprenticeship experience in an electrical aerospace environment or a manufacturing/assembly or tooling environment is desirable If you are interested in applying for this position and you meet the requirements, please send your updated CV to: Natalie Dalkin at Line Up Aviation Line Up Aviation has carved its own place in the recruitment of Aviation and Aerospace personnel all over the world for more than 30 years. We work with some of the industry's best known companies who demand the highest standard of applicants. " on Twitter for all of our latest vacancies, news and pictures from our busy UK Head Office. Interact with us using the tag at anytime! Thank you for your follow!"
Jun 03, 2026
Contractor
On behalf of our client, we are seeking to recruit a Technical Incoming Inspector on an initial 5-month contract. Role: Technical Incoming Inspector Pay: 31.90 per hour via umbrella Location: Belfast Contract: Monday - Friday, 36 hours per week, 5 months contract IR35 Status: Inside Security Clearance : BPSS Responsibilities Carrying out Inspection, Quality Control and Quality Assurance Functions. Ensuring product compliance with design specification, customer and approving authority requirements and regulations. Providing instruction and advice to operators as and when required. Monitoring the Delegated Operator Scheme. Working flexibly in groups. Writing technical reports to highlight drawing, process and tooling anomalies to instigate investigation and corrective action. Essential & Desirable Skills: Candidates must be familiar with quality control requirements. The ability to interpret drawings and specifications, and to communicate effectively is essential. Candidates must be able to demonstrate a knowledge of Company manufacturing and assembly practices, requirements and standards An ONC/ A levels or equivalent qualifications is desirable. A knowledge of 3D metrology would be desirable. A recognised electrical or mechanical apprenticeship and have a minimum of 2 years' relevant post apprenticeship experience in an electrical aerospace environment or a manufacturing/assembly or tooling environment is desirable If you are interested in applying for this position and you meet the requirements, please send your updated CV to: Natalie Dalkin at Line Up Aviation Line Up Aviation has carved its own place in the recruitment of Aviation and Aerospace personnel all over the world for more than 30 years. We work with some of the industry's best known companies who demand the highest standard of applicants. " on Twitter for all of our latest vacancies, news and pictures from our busy UK Head Office. Interact with us using the tag at anytime! Thank you for your follow!"
Apprenticeship Delivery Manager Job reference: REQ003545 Salary: £37,500 - £47,500 per annum Contractual hours: 37.5 Basis: Full Time Region: Hybrid Peterborough office Closing Date: 5 November 2025 at Midnight Interviews: First interviews are to be conducted via Microsoft Teams United Learning is a large, and growing, group of schools aiming to offer a life changing education to children and young people across England. Central Office staff work closely with schools, offering a wealth of expertise to underpin schools' own knowledge. Our specialist departments, including HR, finance, technology, strategy and performance, estates, and marketing, work alongside dedicated school improvement teams. By joining us, you will provide ongoing support to schools, ultimately improving the outcomes of our pupils. United Learning is committed to safeguarding and promoting the welfare of all children and young people and expects all staff and volunteers to share this commitment. All positions are subject to an Enhanced Disclosure and Barring check from the Disclosure and Barring Service (DBS) and shortlisted candidates will be subject to an online check. We always appoint on merit, and we are open to discussing flexible working options. Job description Do you have a passion for people management and apprenticeships? We re looking for a detail-driven Apprenticeship Delivery Manager to build on what we do to make it even better. About the role This is a role where you will see the difference you make. You ll bring extensive experience of curriculum design and delivery and a great knowledge of the apprenticeship space. What drives you is the joy of continuous improvement and people management. We are looking for someone who is a detail-oriented and forward-thinking to lead our programme delivery. Your aim is to make sure learners receive an exceptional experience. You ll care about the line management you provide and always want to do better than any targets set. Be the person who sets the bar for what excellence looks like for our pupils, schools, support staff and training provider team. Duties/responsibilities: Lead the delivery of high-quality apprenticeship programmes, ensuring every learner experiences an ambitious, well-planned curriculum and excellent teaching. Manage and support a team of programme leads and tutors, driving continuous improvement, inclusivity, and strong learner outcomes through effective leadership. Role requirements Essential: Line management experience (>4 years) Level 2 English and Maths qualifications (GCSE, A Level, or Functional Skills L2) Teaching qualification Desirable: School teaching experience Business management qualification at level 5 or higher TAQA Level 3 and 4 qualifications Benefits Competitive salary. Contributory pension scheme. 26 days holiday. Occupational sick pay, protecting you and your family. Competitive maternity, paternity, and adoption benefits. Group Life Insurance Scheme. Westfield Health cash plan and extensive range of employee benefits for eligible staff Continuous Professional Development options that will be tailored to your needs. A supportive team across the country. We are open to requests for flexible working; and we encourage open and regular conversations about work-life balance. United Learning Apprenticeships is graded Good by Ofsted following its latest inspection in January 2024. Inspectors rated the provider as Good in all areas. Please note that we reserve the right to close the application process early if a suitable candidate is found.
Oct 29, 2025
Full time
Apprenticeship Delivery Manager Job reference: REQ003545 Salary: £37,500 - £47,500 per annum Contractual hours: 37.5 Basis: Full Time Region: Hybrid Peterborough office Closing Date: 5 November 2025 at Midnight Interviews: First interviews are to be conducted via Microsoft Teams United Learning is a large, and growing, group of schools aiming to offer a life changing education to children and young people across England. Central Office staff work closely with schools, offering a wealth of expertise to underpin schools' own knowledge. Our specialist departments, including HR, finance, technology, strategy and performance, estates, and marketing, work alongside dedicated school improvement teams. By joining us, you will provide ongoing support to schools, ultimately improving the outcomes of our pupils. United Learning is committed to safeguarding and promoting the welfare of all children and young people and expects all staff and volunteers to share this commitment. All positions are subject to an Enhanced Disclosure and Barring check from the Disclosure and Barring Service (DBS) and shortlisted candidates will be subject to an online check. We always appoint on merit, and we are open to discussing flexible working options. Job description Do you have a passion for people management and apprenticeships? We re looking for a detail-driven Apprenticeship Delivery Manager to build on what we do to make it even better. About the role This is a role where you will see the difference you make. You ll bring extensive experience of curriculum design and delivery and a great knowledge of the apprenticeship space. What drives you is the joy of continuous improvement and people management. We are looking for someone who is a detail-oriented and forward-thinking to lead our programme delivery. Your aim is to make sure learners receive an exceptional experience. You ll care about the line management you provide and always want to do better than any targets set. Be the person who sets the bar for what excellence looks like for our pupils, schools, support staff and training provider team. Duties/responsibilities: Lead the delivery of high-quality apprenticeship programmes, ensuring every learner experiences an ambitious, well-planned curriculum and excellent teaching. Manage and support a team of programme leads and tutors, driving continuous improvement, inclusivity, and strong learner outcomes through effective leadership. Role requirements Essential: Line management experience (>4 years) Level 2 English and Maths qualifications (GCSE, A Level, or Functional Skills L2) Teaching qualification Desirable: School teaching experience Business management qualification at level 5 or higher TAQA Level 3 and 4 qualifications Benefits Competitive salary. Contributory pension scheme. 26 days holiday. Occupational sick pay, protecting you and your family. Competitive maternity, paternity, and adoption benefits. Group Life Insurance Scheme. Westfield Health cash plan and extensive range of employee benefits for eligible staff Continuous Professional Development options that will be tailored to your needs. A supportive team across the country. We are open to requests for flexible working; and we encourage open and regular conversations about work-life balance. United Learning Apprenticeships is graded Good by Ofsted following its latest inspection in January 2024. Inspectors rated the provider as Good in all areas. Please note that we reserve the right to close the application process early if a suitable candidate is found.
Location: Knutsford Package: £ 15-17 per hour - dependent on experience. Overtime at x1.5 Work Pattern: Mon-Fri 08:30-17:00 (40 hours with half hour for lunch) At Oliver Valves, we design and manufacture high-quality valves used in critical applications across the globe. To maintain our reputation for quality, we re looking for a Mechanical Inspector to join our team. The Role This role would be best suited to a CNC or conventional machinist looking to move into inspection or an inspector looking for a new challenge. They will be passionate about engineering and enjoy working in a fast paced, supportive environment. As a Mechanical Inspector, you ll play a key part in ensuring our components and finished products meet the highest standards before reaching our customers. This will involve: Carrying out first-off inspection of CNC-machined parts. Using precision measuring equipment (plug gauges, micrometers, verniers, height gauges) to verify compliance with tight GD&T (Geometric Dimensioning of Tolerancing). Reviewing CAD and machined components against drawings and specifications in imperial measurement. Completing QC paperwork and working with Quality Assurance and Purchasing to resolve quality issues. Managing acceptance/return of defective parts via the ERP system. Using CMM or FARO arm for advanced measurement full training provided if needed. About You We re looking for someone who: Has a mechanical background apprenticeship, vocational training, or relevant industry experience. Brings experience from a machine shop, automotive, aerospace, or precision engineering environment. Can confidently interpret engineering drawings and work with inspection tools. Has a good understanding of ISO9001:2015 quality systems . Is computer-literate and comfortable completing documentation. Is practical, detail-focused, and passionate about engineering quality. Why Join Us? £15-17 per hour depending on experience Benefits package which includes Life Assurance (AKA "Death in Service"), Medi-cash health plan, Pension (employer contribution of 4%, employee contribution of 5%), EAP, 23 days holiday + bank which increases with tenure, drinks machine token and long service awards. Training and development opportunities, including CMM/FARO arm skills. Be part of a business with a global reputation for engineering excellence. Work in a supportive team that takes pride in quality and precision.
Oct 07, 2025
Full time
Location: Knutsford Package: £ 15-17 per hour - dependent on experience. Overtime at x1.5 Work Pattern: Mon-Fri 08:30-17:00 (40 hours with half hour for lunch) At Oliver Valves, we design and manufacture high-quality valves used in critical applications across the globe. To maintain our reputation for quality, we re looking for a Mechanical Inspector to join our team. The Role This role would be best suited to a CNC or conventional machinist looking to move into inspection or an inspector looking for a new challenge. They will be passionate about engineering and enjoy working in a fast paced, supportive environment. As a Mechanical Inspector, you ll play a key part in ensuring our components and finished products meet the highest standards before reaching our customers. This will involve: Carrying out first-off inspection of CNC-machined parts. Using precision measuring equipment (plug gauges, micrometers, verniers, height gauges) to verify compliance with tight GD&T (Geometric Dimensioning of Tolerancing). Reviewing CAD and machined components against drawings and specifications in imperial measurement. Completing QC paperwork and working with Quality Assurance and Purchasing to resolve quality issues. Managing acceptance/return of defective parts via the ERP system. Using CMM or FARO arm for advanced measurement full training provided if needed. About You We re looking for someone who: Has a mechanical background apprenticeship, vocational training, or relevant industry experience. Brings experience from a machine shop, automotive, aerospace, or precision engineering environment. Can confidently interpret engineering drawings and work with inspection tools. Has a good understanding of ISO9001:2015 quality systems . Is computer-literate and comfortable completing documentation. Is practical, detail-focused, and passionate about engineering quality. Why Join Us? £15-17 per hour depending on experience Benefits package which includes Life Assurance (AKA "Death in Service"), Medi-cash health plan, Pension (employer contribution of 4%, employee contribution of 5%), EAP, 23 days holiday + bank which increases with tenure, drinks machine token and long service awards. Training and development opportunities, including CMM/FARO arm skills. Be part of a business with a global reputation for engineering excellence. Work in a supportive team that takes pride in quality and precision.
About the Role We are currently recruiting experienced Pipefitters to join a well-established engineering and fabrication team delivering key industrial projects across Teesside. This is an excellent opportunity to work on long-term assignments within the energy, chemical, and manufacturing sectors - offering stability, competitive rates, and a strong commitment to health, safety and quality. Key Responsibilities Read and interpret isometric, P&ID, and GA drawings Measure, cut, bend and prepare pipework using appropriate hand and power tools Install pipe systems using threaded, flanged, welded, or mechanical joints (carbon/stainless steel) Support pressure testing, hydrotesting and flushing activities as required Work to site-specific tolerances and project quality standards Assist in alignment of pipework to equipment and structural supports Collaborate with site supervisors, welders and inspectors to ensure safe, efficient progress Maintain a clean and safe working environment in line with site HSE protocols What We're Looking For Time-served apprenticeship or NVQ Level 3 in Pipefitting or Mechanical Engineering Previous experience working on industrial or heavy engineering sites (petrochemical, power, fabrication yards, etc.) Strong ability to work from drawings and understand complex pipe routes and layouts Valid CCNSG Safety Passport (required) Additional qualifications (e.g. IPAF, Confined Space, Welding appreciation) are desirable Must be eligible to work in the UK - due to the nature of some projects, UK National status may be required What You Need to Know All work is Teesside-based - no travel or lodging required Overtime opportunities available Site-specific induction and competency tests may be carried out
Sep 25, 2025
Seasonal
About the Role We are currently recruiting experienced Pipefitters to join a well-established engineering and fabrication team delivering key industrial projects across Teesside. This is an excellent opportunity to work on long-term assignments within the energy, chemical, and manufacturing sectors - offering stability, competitive rates, and a strong commitment to health, safety and quality. Key Responsibilities Read and interpret isometric, P&ID, and GA drawings Measure, cut, bend and prepare pipework using appropriate hand and power tools Install pipe systems using threaded, flanged, welded, or mechanical joints (carbon/stainless steel) Support pressure testing, hydrotesting and flushing activities as required Work to site-specific tolerances and project quality standards Assist in alignment of pipework to equipment and structural supports Collaborate with site supervisors, welders and inspectors to ensure safe, efficient progress Maintain a clean and safe working environment in line with site HSE protocols What We're Looking For Time-served apprenticeship or NVQ Level 3 in Pipefitting or Mechanical Engineering Previous experience working on industrial or heavy engineering sites (petrochemical, power, fabrication yards, etc.) Strong ability to work from drawings and understand complex pipe routes and layouts Valid CCNSG Safety Passport (required) Additional qualifications (e.g. IPAF, Confined Space, Welding appreciation) are desirable Must be eligible to work in the UK - due to the nature of some projects, UK National status may be required What You Need to Know All work is Teesside-based - no travel or lodging required Overtime opportunities available Site-specific induction and competency tests may be carried out
Quality Inspector We are working with a client who has been established for over 50 years now. Ourclient is a supplier of precision and machined parts for the aerospace sector. They are currently looking to recruit an experienced Apprentice Trained Quality Inspector. Key skills required: Must have over 5 years working experience as a Quality Inspector Must have experience using manual measuring equipm click apply for full job details
Sep 23, 2025
Full time
Quality Inspector We are working with a client who has been established for over 50 years now. Ourclient is a supplier of precision and machined parts for the aerospace sector. They are currently looking to recruit an experienced Apprentice Trained Quality Inspector. Key skills required: Must have over 5 years working experience as a Quality Inspector Must have experience using manual measuring equipm click apply for full job details
Major Recruitment Oldbury
Darlaston, West Midlands
Major Recruitment Oldbury are delighted to be recruiting for our Darlaston based client who are seeking an experienced Quality Inspector/ Engineer to join their busy quality team. The role is on a four day working week of Monday to Thursday 6am to 4.30pm. The role is on a temporary to permanent basis. Duties and tasks will include: Complete first off and last off checks using mechanical measuring equipment, acting as the release signatory for manufacturing components. Run existing CMM programs on our Mitutoyo CNC CMM's. Have excellent communication skills and be able to relate inspection findings back to Engineers in a clear and concise manner. Be able to read Engineering Drawings and have a working knowledge of Geometrical Dimensioning & Tolerancing. Be able to work to inspection plans and use their own initiative to solve problems. Be able to work as part of a team. Take ownership of the Engineering Change Notification process. Ensure calibration of equipment is completed in a timely manner Support our Production Engineers in the development of high accuracy processes, taking ownership of the controls section in relation to Method of Manufacture. Support our Quality Engineers with the creation of inspection plans. Candidates welcome to apply for the role will have the following: Experience must have been gained in a similar role. Experience of using mechanical measuring equipment is essential. The candidate must be able to work on their own initiative. Experience of running CMM programs is desirable, but training will be given if required. An Engineering qualification gained through an apprenticeship would be desirable. INDLS
Sep 22, 2025
Full time
Major Recruitment Oldbury are delighted to be recruiting for our Darlaston based client who are seeking an experienced Quality Inspector/ Engineer to join their busy quality team. The role is on a four day working week of Monday to Thursday 6am to 4.30pm. The role is on a temporary to permanent basis. Duties and tasks will include: Complete first off and last off checks using mechanical measuring equipment, acting as the release signatory for manufacturing components. Run existing CMM programs on our Mitutoyo CNC CMM's. Have excellent communication skills and be able to relate inspection findings back to Engineers in a clear and concise manner. Be able to read Engineering Drawings and have a working knowledge of Geometrical Dimensioning & Tolerancing. Be able to work to inspection plans and use their own initiative to solve problems. Be able to work as part of a team. Take ownership of the Engineering Change Notification process. Ensure calibration of equipment is completed in a timely manner Support our Production Engineers in the development of high accuracy processes, taking ownership of the controls section in relation to Method of Manufacture. Support our Quality Engineers with the creation of inspection plans. Candidates welcome to apply for the role will have the following: Experience must have been gained in a similar role. Experience of using mechanical measuring equipment is essential. The candidate must be able to work on their own initiative. Experience of running CMM programs is desirable, but training will be given if required. An Engineering qualification gained through an apprenticeship would be desirable. INDLS
Quality Inspector - Aerospace (Manual Inspection) Location: South West UK (On-site) Salary: 30,000 - 35,000 + benefits I'm currently recruiting for a leading aerospace precision engineering business who are looking for a Quality Inspector to join their established team. This role is primarily manual inspection, ensuring aerospace components meet tight tolerances and customer specifications. The Role: Carry out first-off, in-process, and final inspections on precision-machined aerospace components. Use a wide range of manual inspection equipment (micrometers, verniers, gauges, shadowgraphs, height gauges, etc.) to verify quality. Operate CMMs for measurement and inspection when required. Interpret engineering drawings and specifications, including GD&T. Record inspection results accurately and maintain full traceability of documentation. Support FAIR (First Article Inspection Report) activity when needed. Collaborate with machinists and engineers to resolve quality issues at source. What You'll Need: Experience as a Quality Inspector within aerospace, precision engineering, or a similar high-precision industry. Strong skills in manual inspection using micrometers, verniers, and gauges. Ability to operate CMMs (basic programming desirable but not essential). Solid understanding of engineering drawings and geometric tolerancing (GD&T). Excellent attention to detail and commitment to quality. Desirable: Aerospace or defence sector background. Knowledge of FAIRs and AS9100 standards. Apprenticeship or qualifications in mechanical/precision engineering. Hours & Benefits: 37 hours per week (Mon-Thu 07:30-16:00, Fri 07:30-12:30). 25 days holiday + bank holidays. Company pension scheme, health & wellbeing plan, life insurance. Cycle-to-work scheme. This is an excellent opportunity for a hands-on Quality Inspector with strong manual inspection skills to join a respected aerospace manufacturer. The company offers stability, long-term career prospects, and a competitive salary package. If you're an experienced inspector looking for your next move, apply today or get in touch for more details.
Sep 22, 2025
Full time
Quality Inspector - Aerospace (Manual Inspection) Location: South West UK (On-site) Salary: 30,000 - 35,000 + benefits I'm currently recruiting for a leading aerospace precision engineering business who are looking for a Quality Inspector to join their established team. This role is primarily manual inspection, ensuring aerospace components meet tight tolerances and customer specifications. The Role: Carry out first-off, in-process, and final inspections on precision-machined aerospace components. Use a wide range of manual inspection equipment (micrometers, verniers, gauges, shadowgraphs, height gauges, etc.) to verify quality. Operate CMMs for measurement and inspection when required. Interpret engineering drawings and specifications, including GD&T. Record inspection results accurately and maintain full traceability of documentation. Support FAIR (First Article Inspection Report) activity when needed. Collaborate with machinists and engineers to resolve quality issues at source. What You'll Need: Experience as a Quality Inspector within aerospace, precision engineering, or a similar high-precision industry. Strong skills in manual inspection using micrometers, verniers, and gauges. Ability to operate CMMs (basic programming desirable but not essential). Solid understanding of engineering drawings and geometric tolerancing (GD&T). Excellent attention to detail and commitment to quality. Desirable: Aerospace or defence sector background. Knowledge of FAIRs and AS9100 standards. Apprenticeship or qualifications in mechanical/precision engineering. Hours & Benefits: 37 hours per week (Mon-Thu 07:30-16:00, Fri 07:30-12:30). 25 days holiday + bank holidays. Company pension scheme, health & wellbeing plan, life insurance. Cycle-to-work scheme. This is an excellent opportunity for a hands-on Quality Inspector with strong manual inspection skills to join a respected aerospace manufacturer. The company offers stability, long-term career prospects, and a competitive salary package. If you're an experienced inspector looking for your next move, apply today or get in touch for more details.
