144 jobs found

Site Service Technician West Midlands Up to 45k + car Responsible for the efficient maintenance and servicing of UV Disinfection Systems on site in the Severn Trent Water network. Key Accountabilities: Tasks and responsibilities: The key objectives of the appointment are:- To undertake planned & reactive calibrations, servicing, maintenance and repairs on UV Disinfection Systems to the company's high standard. To undertake fault finding tasks and rectify in a responsive efficient manner. To undertake and provide a service on the Company's emergency/out of hours "Call Out Rota" for our Client in the Severn Trent area. Provide good liaison / communication and provide positive feedback between site and office staff. To record all data from site, which is relevant on-site report forms along with photographic evidence. Be a responsible representative at site assuring all works is carried out to a high standard in a safe manner promoting good customer relations. Assist the UV Team Leader & Site Services Co-Ordinator in the planning of works under the UV Contract for upcoming activities, ensuring that materials and equipment are optimised for upcoming scopes of work. Lead excellent working practices, including: Health, safety & environmental compliance. Data protection & information security. Customer focus. Team Behaviour. Housekeeping. Continuous improvement. Compliance with the Company's Business Quality Management System. To assume other responsibilities as required and work with colleagues to further the good performance of the Company. To always abide by the Company's Culture and Values. Maintain a 'site diary' detailing activities and key events during the course of your activities. Share the diary with your work planner / manager as required. Where testing is required, accurately record on relevant documentation. Ensure that the site, equipment and vehicles are exceptionally clean, maintained and orderly. In particular, ensure that test equipment, tools, apparatus and cabling do not present a hazard. Where applicable, barrier-off areas and ensure that only authorised and competent persons are present within the work area. Demonstrate strong and effective inter-personal and communication skills and the ability to interact professionally with a diverse group of clients and personnel. Work hard and diligently to provide exceptional customer service. Essential skills At least 3 years of relevant/similar site work experience within a customer-based or customer focused environment. Experience on UV Reactors & Disinfection systems, relatable experience can be considered. Electrical / Commissioning background preferred, with demonstrable fault diagnosis and repair capability. Good IT skills. Knowledge of the Water Industry. Solid report writing skills. Health and Safety awareness. Qualifications Apprenticeship served in a relevant Electrical / Mechanical / Instrumentation discipline (Electrical preferred). City & Guilds NVQ Level 3 in relevant discipline. Certificate of Testing & Inspection 18th Edition (or working towards). ECS Card (Gold) or equivalent.

This is not a typical line maintenance role. As an MOC Engineer, you will be at the heart of the operation -making real-time decisions that directly impact aircraft availability and the flying programme across the TUI Group. You'll provide critical technical leadership on a 24/7/365 basis, ensuring safe, efficient, and timely operations across our global fleet. This is a shift-based role working 12-hour shifts (2 days, 2 nights, 4 off). ABOUT OUR OFFER Personal benefits: Attractive remuneration, discretionary bonus schemes, generous travel benefits, extensive health & well-being support, and more.Flexible working: Work is something you do, not somewhere you go. We encourage a healthy work-life balance with a dynamic working environment.A career to shape: Access the TUI Learning Hub to level-up and reach your ambitions.Broaden your network: We champion intercultural collaboration and provide opportunities to work on global projects and teamsCommunity: Get involved with incredible local charity and sustainability initiatives like the TUI Care Foundation. ABOUT THE JOB Provide real-time technical support and troubleshooting guidance to Flight Crew and engineers across the global networkLead defect management calls with line stations and third-party providers, ensuring clear operational visibilityProactively manage Deferred Defects and maintenance activity to protect aircraft availabilityWork closely with Flight Operations and Base Maintenance to maintain fleet readiness and minimise disruptionCoordinate worldwide Line Maintenance activities, acting as the central point of control for engineering operationsTake ownership of AOG situations, driving recovery plans and directing resolution across multiple stakeholdersAct as the key interface between Line Maintenance, Part M, and support departments on airworthiness mattersLiaise directly with OEMs including Boeing and component manufacturers on complex technical issuesAnalyse component trends and drive effective troubleshooting strategiesOptimise maintenance planning through effective use of the MELProvide hands-on operational support where requiredDeputise for the MOC Duty Manager when needed ABOUT YOU Hold a valid CAA / EASA B1 or B2 LicenceCompleted a recognised Aircraft Engineering apprenticeship or equivalentStrong experience in AOG recovery and operational decision-makingConfident working in a fast-paced, high-pressure operational environmentSolid working knowledge of AMOS and maintenance planning systemsA problem-solver who can think logically and make sound decisions quicklyStrong communicator, able to translate complex technical issues across teamsAble to balance operational priorities with commercial impact (e.g. delay costs)Organised, adaptable, and confident managing multiple prioritiesWilling to travel at short notice to support operational requirements From a workplace to a place to belong. At TUI we embrace diversity, equity, and inclusion, encouraging everyone to come as you are, because together, our potential is limitless. We are committed to supporting candidates with disabilities and impairments so if you require any support, please do let us know. Security Clearance Statement At TUI, safety is our top priority. We conduct thorough background checks on all employees who join our Airline. Rest assured; we'll guide you on the necessary information you need to provide at each stage. Please note that if you are applying for a role in the UK, you must ensure you can provide a full 5 years referencing, plus a criminal record check for all countries you've resided in for more than 6 months in the past 5 years (some costs may apply).

This is not a typical line maintenance role. As an MOC Engineer, you will be at the heart of the operation -making real-time decisions that directly impact aircraft availability and the flying programme across the TUI Group. You'll provide critical technical leadership on a 24/7/365 basis, ensuring safe, efficient, and timely operations across our global fleet. This is a shift-based role working 12-hour shifts (2 days, 2 nights, 4 off). ABOUT OUR OFFER Personal benefits: Attractive remuneration, discretionary bonus schemes, generous travel benefits, extensive health & well-being support, and more.Flexible working: Work is something you do, not somewhere you go. We encourage a healthy work-life balance with a dynamic working environment.A career to shape: Access the TUI Learning Hub to level-up and reach your ambitions.Broaden your network: We champion intercultural collaboration and provide opportunities to work on global projects and teamsCommunity: Get involved with incredible local charity and sustainability initiatives like the TUI Care Foundation. ABOUT THE JOB Provide real-time technical support and troubleshooting guidance to Flight Crew and engineers across the global networkLead defect management calls with line stations and third-party providers, ensuring clear operational visibilityProactively manage Deferred Defects and maintenance activity to protect aircraft availabilityWork closely with Flight Operations and Base Maintenance to maintain fleet readiness and minimise disruptionCoordinate worldwide Line Maintenance activities, acting as the central point of control for engineering operationsTake ownership of AOG situations, driving recovery plans and directing resolution across multiple stakeholdersAct as the key interface between Line Maintenance, Part M, and support departments on airworthiness mattersLiaise directly with OEMs including Boeing and component manufacturers on complex technical issuesAnalyse component trends and drive effective troubleshooting strategiesOptimise maintenance planning through effective use of the MELProvide hands-on operational support where requiredDeputise for the MOC Duty Manager when needed ABOUT YOU Hold a valid CAA / EASA B1 or B2 LicenceCompleted a recognised Aircraft Engineering apprenticeship or equivalentStrong experience in AOG recovery and operational decision-makingConfident working in a fast-paced, high-pressure operational environmentSolid working knowledge of AMOS and maintenance planning systemsA problem-solver who can think logically and make sound decisions quicklyStrong communicator, able to translate complex technical issues across teamsAble to balance operational priorities with commercial impact (e.g. delay costs)Organised, adaptable, and confident managing multiple prioritiesWilling to travel at short notice to support operational requirements From a workplace to a place to belong. At TUI we embrace diversity, equity, and inclusion, encouraging everyone to come as you are, because together, our potential is limitless. We are committed to supporting candidates with disabilities and impairments so if you require any support, please do let us know. Security Clearance Statement At TUI, safety is our top priority. We conduct thorough background checks on all employees who join our Airline. Rest assured; we'll guide you on the necessary information you need to provide at each stage. Please note that if you are applying for a role in the UK, you must ensure you can provide a full 5 years referencing, plus a criminal record check for all countries you've resided in for more than 6 months in the past 5 years (some costs may apply).

Job Title: Maritime Electrical Engineer Location: Portsmouth Naval Base. We offer a range of hybrid and flexible working arrangements. Please speak to your recruiter about the options for this particular role Salary: Up to £42,000 depending on skills and experience What you'll be doing: Applies knowledge, skill & experience in company products, services, approaches, techniques and governance. Applies experience and works across a range of standard products and services, resolves common engineering problems. Working under technical supervision Obtain confirmation beyond reasonable doubt by review, surveillance and audit that those assumptions, underpinning engineering data, analysis methodologies, and interpretation of results have been validated Define the qualification obligations for the assurance hold points during build, test and commissioning Working under technical supervision, undertake functional design and/or provide advice and qualification for the scope of responsibility and provide evidence for acceptance, fitness for purpose, regulatory & legislative requirements, and safety Liaise with both internal and external stakeholders as required ensuring that their requirements are adequately supported and that their needs are fully considered and incorporated where appropriate and agreed Contribute to identification and closure of issues emerging from all product lifecycle stages and to manage the resulting change embodiment activities Provide realistic programme status, identify problem areas and implement agreed recovery plans Provide support for assurance that the design is adequate i.e. it is robust and provide supporting documentation for the safety case Your skills and experiences: Relevant experience within an Electrical Engineering discipline Systems knowledge of power and distribution & controls systems experience Understands engineering approaches, processes and procedures HNC/HND or an electrical apprenticeship is preferred Benefits: As well as a competitive pension scheme, BAE Systems also offers employee share plans, an extensive range of flexible discounted health, wellbeing and lifestyle benefits, including a green car scheme, private health plans and shopping discounts - you may also be eligible for an annual incentive. The Warship Technical Authority Power and Propulsion team: The primary responsibility of this role is to ensure the design intent and safety of the QEC platform and to collate the assurance evidence of this for the corresponding Warship Assurance Team while working as directed by the QEC principal Electrical Engineer - Power and Propulsion, under the definitive engineering authority of the QEC WTA (Warship Technical Authority) Class Lead Engineer. Why BAE Systems? This is a place where you'll be able to make a real difference. You'll be part of an inclusive culture that values diversity of thought, rewards integrity, and merit, and where you'll be empowered to fulfil your potential. We welcome people from all backgrounds and want to make sure that our recruitment processes are as inclusive as possible. If you have a disability or health condition (for example dyslexia, autism, an anxiety disorder etc .) that may affect your performance in certain assessment types, please speak to your recruiter about potential reasonable adjustments. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date: 17th June 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible.

Job Title: Maritime Electrical Engineer Location: Portsmouth Naval Base. We offer a range of hybrid and flexible working arrangements. Please speak to your recruiter about the options for this particular role Salary: Up to £42,000 depending on skills and experience What you'll be doing: Applies knowledge, skill & experience in company products, services, approaches, techniques and governance. Applies experience and works across a range of standard products and services, resolves common engineering problems. Working under technical supervision Obtain confirmation beyond reasonable doubt by review, surveillance and audit that those assumptions, underpinning engineering data, analysis methodologies, and interpretation of results have been validated Define the qualification obligations for the assurance hold points during build, test and commissioning Working under technical supervision, undertake functional design and/or provide advice and qualification for the scope of responsibility and provide evidence for acceptance, fitness for purpose, regulatory & legislative requirements, and safety Liaise with both internal and external stakeholders as required ensuring that their requirements are adequately supported and that their needs are fully considered and incorporated where appropriate and agreed Contribute to identification and closure of issues emerging from all product lifecycle stages and to manage the resulting change embodiment activities Provide realistic programme status, identify problem areas and implement agreed recovery plans Provide support for assurance that the design is adequate i.e. it is robust and provide supporting documentation for the safety case Your skills and experiences: Relevant experience within an Electrical Engineering discipline Systems knowledge of power and distribution & controls systems experience Understands engineering approaches, processes and procedures HNC/HND or an electrical apprenticeship is preferred Benefits: As well as a competitive pension scheme, BAE Systems also offers employee share plans, an extensive range of flexible discounted health, wellbeing and lifestyle benefits, including a green car scheme, private health plans and shopping discounts - you may also be eligible for an annual incentive. The Warship Technical Authority Power and Propulsion team: The primary responsibility of this role is to ensure the design intent and safety of the QEC platform and to collate the assurance evidence of this for the corresponding Warship Assurance Team while working as directed by the QEC principal Electrical Engineer - Power and Propulsion, under the definitive engineering authority of the QEC WTA (Warship Technical Authority) Class Lead Engineer. Why BAE Systems? This is a place where you'll be able to make a real difference. You'll be part of an inclusive culture that values diversity of thought, rewards integrity, and merit, and where you'll be empowered to fulfil your potential. We welcome people from all backgrounds and want to make sure that our recruitment processes are as inclusive as possible. If you have a disability or health condition (for example dyslexia, autism, an anxiety disorder etc .) that may affect your performance in certain assessment types, please speak to your recruiter about potential reasonable adjustments. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date: 17th June 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible.

Job Title: Maritime Electrical Engineer Location: Portsmouth Naval Base. We offer a range of hybrid and flexible working arrangements. Please speak to your recruiter about the options for this particular role Salary: Up to £42,000 depending on skills and experience What you'll be doing: Applies knowledge, skill & experience in company products, services, approaches, techniques and governance. Applies experience and works across a range of standard products and services, resolves common engineering problems. Working under technical supervision Obtain confirmation beyond reasonable doubt by review, surveillance and audit that those assumptions, underpinning engineering data, analysis methodologies, and interpretation of results have been validated Define the qualification obligations for the assurance hold points during build, test and commissioning Working under technical supervision, undertake functional design and/or provide advice and qualification for the scope of responsibility and provide evidence for acceptance, fitness for purpose, regulatory & legislative requirements, and safety Liaise with both internal and external stakeholders as required ensuring that their requirements are adequately supported and that their needs are fully considered and incorporated where appropriate and agreed Contribute to identification and closure of issues emerging from all product lifecycle stages and to manage the resulting change embodiment activities Provide realistic programme status, identify problem areas and implement agreed recovery plans Provide support for assurance that the design is adequate i.e. it is robust and provide supporting documentation for the safety case Your skills and experiences: Relevant experience within an Electrical Engineering discipline Systems knowledge of power and distribution & controls systems experience Understands engineering approaches, processes and procedures HNC/HND or an electrical apprenticeship is preferred Benefits: As well as a competitive pension scheme, BAE Systems also offers employee share plans, an extensive range of flexible discounted health, wellbeing and lifestyle benefits, including a green car scheme, private health plans and shopping discounts - you may also be eligible for an annual incentive. The Warship Technical Authority Power and Propulsion team: The primary responsibility of this role is to ensure the design intent and safety of the QEC platform and to collate the assurance evidence of this for the corresponding Warship Assurance Team while working as directed by the QEC principal Electrical Engineer - Power and Propulsion, under the definitive engineering authority of the QEC WTA (Warship Technical Authority) Class Lead Engineer. Why BAE Systems? This is a place where you'll be able to make a real difference. You'll be part of an inclusive culture that values diversity of thought, rewards integrity, and merit, and where you'll be empowered to fulfil your potential. We welcome people from all backgrounds and want to make sure that our recruitment processes are as inclusive as possible. If you have a disability or health condition (for example dyslexia, autism, an anxiety disorder etc .) that may affect your performance in certain assessment types, please speak to your recruiter about potential reasonable adjustments. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date: 17th June 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible.

Job Title: Maritime Electrical Engineer Location: Portsmouth Naval Base. We offer a range of hybrid and flexible working arrangements. Please speak to your recruiter about the options for this particular role Salary: Up to £42,000 depending on skills and experience What you'll be doing: Applies knowledge, skill & experience in company products, services, approaches, techniques and governance. Applies experience and works across a range of standard products and services, resolves common engineering problems. Working under technical supervision Obtain confirmation beyond reasonable doubt by review, surveillance and audit that those assumptions, underpinning engineering data, analysis methodologies, and interpretation of results have been validated Define the qualification obligations for the assurance hold points during build, test and commissioning Working under technical supervision, undertake functional design and/or provide advice and qualification for the scope of responsibility and provide evidence for acceptance, fitness for purpose, regulatory & legislative requirements, and safety Liaise with both internal and external stakeholders as required ensuring that their requirements are adequately supported and that their needs are fully considered and incorporated where appropriate and agreed Contribute to identification and closure of issues emerging from all product lifecycle stages and to manage the resulting change embodiment activities Provide realistic programme status, identify problem areas and implement agreed recovery plans Provide support for assurance that the design is adequate i.e. it is robust and provide supporting documentation for the safety case Your skills and experiences: Relevant experience within an Electrical Engineering discipline Systems knowledge of power and distribution & controls systems experience Understands engineering approaches, processes and procedures HNC/HND or an electrical apprenticeship is preferred Benefits: As well as a competitive pension scheme, BAE Systems also offers employee share plans, an extensive range of flexible discounted health, wellbeing and lifestyle benefits, including a green car scheme, private health plans and shopping discounts - you may also be eligible for an annual incentive. The Warship Technical Authority Power and Propulsion team: The primary responsibility of this role is to ensure the design intent and safety of the QEC platform and to collate the assurance evidence of this for the corresponding Warship Assurance Team while working as directed by the QEC principal Electrical Engineer - Power and Propulsion, under the definitive engineering authority of the QEC WTA (Warship Technical Authority) Class Lead Engineer. Why BAE Systems? This is a place where you'll be able to make a real difference. You'll be part of an inclusive culture that values diversity of thought, rewards integrity, and merit, and where you'll be empowered to fulfil your potential. We welcome people from all backgrounds and want to make sure that our recruitment processes are as inclusive as possible. If you have a disability or health condition (for example dyslexia, autism, an anxiety disorder etc .) that may affect your performance in certain assessment types, please speak to your recruiter about potential reasonable adjustments. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date: 17th June 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible.

Job Title: Maritime Electrical Engineer Location: Portsmouth Naval Base. We offer a range of hybrid and flexible working arrangements. Please speak to your recruiter about the options for this particular role Salary: Up to £42,000 depending on skills and experience What you'll be doing: Applies knowledge, skill & experience in company products, services, approaches, techniques and governance. Applies experience and works across a range of standard products and services, resolves common engineering problems. Working under technical supervision Obtain confirmation beyond reasonable doubt by review, surveillance and audit that those assumptions, underpinning engineering data, analysis methodologies, and interpretation of results have been validated Define the qualification obligations for the assurance hold points during build, test and commissioning Working under technical supervision, undertake functional design and/or provide advice and qualification for the scope of responsibility and provide evidence for acceptance, fitness for purpose, regulatory & legislative requirements, and safety Liaise with both internal and external stakeholders as required ensuring that their requirements are adequately supported and that their needs are fully considered and incorporated where appropriate and agreed Contribute to identification and closure of issues emerging from all product lifecycle stages and to manage the resulting change embodiment activities Provide realistic programme status, identify problem areas and implement agreed recovery plans Provide support for assurance that the design is adequate i.e. it is robust and provide supporting documentation for the safety case Your skills and experiences: Relevant experience within an Electrical Engineering discipline Systems knowledge of power and distribution & controls systems experience Understands engineering approaches, processes and procedures HNC/HND or an electrical apprenticeship is preferred Benefits: As well as a competitive pension scheme, BAE Systems also offers employee share plans, an extensive range of flexible discounted health, wellbeing and lifestyle benefits, including a green car scheme, private health plans and shopping discounts - you may also be eligible for an annual incentive. The Warship Technical Authority Power and Propulsion team: The primary responsibility of this role is to ensure the design intent and safety of the QEC platform and to collate the assurance evidence of this for the corresponding Warship Assurance Team while working as directed by the QEC principal Electrical Engineer - Power and Propulsion, under the definitive engineering authority of the QEC WTA (Warship Technical Authority) Class Lead Engineer. Why BAE Systems? This is a place where you'll be able to make a real difference. You'll be part of an inclusive culture that values diversity of thought, rewards integrity, and merit, and where you'll be empowered to fulfil your potential. We welcome people from all backgrounds and want to make sure that our recruitment processes are as inclusive as possible. If you have a disability or health condition (for example dyslexia, autism, an anxiety disorder etc .) that may affect your performance in certain assessment types, please speak to your recruiter about potential reasonable adjustments. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date: 17th June 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible.

Job Title: Maritime Electrical Engineer Location: Portsmouth Naval Base. We offer a range of hybrid and flexible working arrangements. Please speak to your recruiter about the options for this particular role Salary: Up to £42,000 depending on skills and experience What you'll be doing: Applies knowledge, skill & experience in company products, services, approaches, techniques and governance. Applies experience and works across a range of standard products and services, resolves common engineering problems. Working under technical supervision Obtain confirmation beyond reasonable doubt by review, surveillance and audit that those assumptions, underpinning engineering data, analysis methodologies, and interpretation of results have been validated Define the qualification obligations for the assurance hold points during build, test and commissioning Working under technical supervision, undertake functional design and/or provide advice and qualification for the scope of responsibility and provide evidence for acceptance, fitness for purpose, regulatory & legislative requirements, and safety Liaise with both internal and external stakeholders as required ensuring that their requirements are adequately supported and that their needs are fully considered and incorporated where appropriate and agreed Contribute to identification and closure of issues emerging from all product lifecycle stages and to manage the resulting change embodiment activities Provide realistic programme status, identify problem areas and implement agreed recovery plans Provide support for assurance that the design is adequate i.e. it is robust and provide supporting documentation for the safety case Your skills and experiences: Relevant experience within an Electrical Engineering discipline Systems knowledge of power and distribution & controls systems experience Understands engineering approaches, processes and procedures HNC/HND or an electrical apprenticeship is preferred Benefits: As well as a competitive pension scheme, BAE Systems also offers employee share plans, an extensive range of flexible discounted health, wellbeing and lifestyle benefits, including a green car scheme, private health plans and shopping discounts - you may also be eligible for an annual incentive. The Warship Technical Authority Power and Propulsion team: The primary responsibility of this role is to ensure the design intent and safety of the QEC platform and to collate the assurance evidence of this for the corresponding Warship Assurance Team while working as directed by the QEC principal Electrical Engineer - Power and Propulsion, under the definitive engineering authority of the QEC WTA (Warship Technical Authority) Class Lead Engineer. Why BAE Systems? This is a place where you'll be able to make a real difference. You'll be part of an inclusive culture that values diversity of thought, rewards integrity, and merit, and where you'll be empowered to fulfil your potential. We welcome people from all backgrounds and want to make sure that our recruitment processes are as inclusive as possible. If you have a disability or health condition (for example dyslexia, autism, an anxiety disorder etc .) that may affect your performance in certain assessment types, please speak to your recruiter about potential reasonable adjustments. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date: 17th June 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible.

Job Title: Maritime Electrical Engineer Location: Portsmouth Naval Base. We offer a range of hybrid and flexible working arrangements. Please speak to your recruiter about the options for this particular role Salary: Up to £42,000 depending on skills and experience What you'll be doing: Applies knowledge, skill & experience in company products, services, approaches, techniques and governance. Applies experience and works across a range of standard products and services, resolves common engineering problems. Working under technical supervision Obtain confirmation beyond reasonable doubt by review, surveillance and audit that those assumptions, underpinning engineering data, analysis methodologies, and interpretation of results have been validated Define the qualification obligations for the assurance hold points during build, test and commissioning Working under technical supervision, undertake functional design and/or provide advice and qualification for the scope of responsibility and provide evidence for acceptance, fitness for purpose, regulatory & legislative requirements, and safety Liaise with both internal and external stakeholders as required ensuring that their requirements are adequately supported and that their needs are fully considered and incorporated where appropriate and agreed Contribute to identification and closure of issues emerging from all product lifecycle stages and to manage the resulting change embodiment activities Provide realistic programme status, identify problem areas and implement agreed recovery plans Provide support for assurance that the design is adequate i.e. it is robust and provide supporting documentation for the safety case Your skills and experiences: Relevant experience within an Electrical Engineering discipline Systems knowledge of power and distribution & controls systems experience Understands engineering approaches, processes and procedures HNC/HND or an electrical apprenticeship is preferred Benefits: As well as a competitive pension scheme, BAE Systems also offers employee share plans, an extensive range of flexible discounted health, wellbeing and lifestyle benefits, including a green car scheme, private health plans and shopping discounts - you may also be eligible for an annual incentive. The Warship Technical Authority Power and Propulsion team: The primary responsibility of this role is to ensure the design intent and safety of the QEC platform and to collate the assurance evidence of this for the corresponding Warship Assurance Team while working as directed by the QEC principal Electrical Engineer - Power and Propulsion, under the definitive engineering authority of the QEC WTA (Warship Technical Authority) Class Lead Engineer. Why BAE Systems? This is a place where you'll be able to make a real difference. You'll be part of an inclusive culture that values diversity of thought, rewards integrity, and merit, and where you'll be empowered to fulfil your potential. We welcome people from all backgrounds and want to make sure that our recruitment processes are as inclusive as possible. If you have a disability or health condition (for example dyslexia, autism, an anxiety disorder etc .) that may affect your performance in certain assessment types, please speak to your recruiter about potential reasonable adjustments. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date: 17th June 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible.

The company are a multi-national group, being No 1 in Europe for what they do! With a number of awards and recognitions, with great career progression and opportunities across the business! Important: All applicants must be able to obtain Security Clearance and must hold British Nationality as their primary nationality. Working: The role is a 4-5 day a week onsite role and is on a secure site where SC clearance is needed. Join a business at the forefront of innovation, with a lot to offer! A company backed by a record multi-year order book, offering long-term stability and sustained investment, with years of secured work ahead! Company Highlights: Be part of an organisation that invests in its people and their long-term success: Join a company who are a global leader in defence innovation, known not only for its technological excellence but also for its outstanding workplace culture. A reputable business who, have a number of awards and recognitions, including Sunday times 'Best Places to Work 2024'. Recognised as a 'Most Loved Organisation' A organisation passionate about it's people with accreditations such as 'Investors in People 'We Invest in People' (Gold) & Investors in People 'We Invest in Wellbeing' (Platinum) - the highest level of accreditation. Passionate advocates for Equity, Diversity & Inclusion, with 10+ employee networks. Committed employer of veterans and service leavers, awarded as one of the Top 15 Great British Employers of Veterans in the Forces in Business Awards 2025 and Gold member of 'The 5% Club'. Armed Forces Covenant (Gold). Be part of a growing team, involved in an international product range, and influencing today's most advanced innovations! Full range of company benefits, flexible working, training, development, and clear career progression! Evolving business, with formal training programmes covering both technical and soft skills, complemented by lunchtime learning sessions, language courses, and supported self-study, with access to thousands of online courses and learning resources. We're looking for a Senior Test Engineer to join a high-performing Manufacturing team, supporting the test and diagnostics of electrical and electronic sub-systems and circuit cards during the early phases of the product lifecycle. In this role, you'll provide technical expertise to ensure manufacturing test capability meets programme targets across time, cost and quality. Playing a key part in delivering cutting-edge systems into production. Responsibilities: Delivering Test Engineering support throughout the design and development lifecycle, from initial concept through to Production Readiness Review and release to Operations Supporting the introduction of test facilities, ensuring robust configuration control of equipment and processes prior to use Developing test specifications, operator instructions and technical documentation for production environments Diagnosing production test failures down to component level, supporting electrical/electronic sub-assemblies and circuit cards Collaborating closely with Operations, Design teams and key stakeholders to resolve technical challenges Ensuring all work aligns with programme, quality and governance requirements, while driving continuous improvement Working with Test Experts and Design Engineers to develop and implement test strategies, influencing design for testability Supporting Manufacturing in defining process flows for new products Contributing to Process FMEA activities, ensuring test risks are identified and mitigated Initiating test fixture designs for new products Estimating test times and supporting planning for new product introduction Supporting functional and environmental testing of prototype systems You'll join a collaborative and inclusive manufacturing environment, working within a small, dedicated team of engineers. The team combines apprentices, graduates and experienced professionals, all focused on delivering technical excellence across a range of complex systems in development and production. Essential Skills & Experience Minimum Level 4 qualification in Engineering, Physics or Maths (ideally Electrical, Electronic, Aerospace or Mechanical) Strong grounding in electrical/electronic principles (analogue and/or digital) Proven experience in a manufacturing or engineering environment Solid understanding of test and measurement principles, along with fault-finding techniques at sub-assembly and component level Experience using manual and automated test equipment (defence or highly regulated environments preferred) Familiarity with systems such as SAP or MES for recording test activity, non-conformance reporting and concessions Ability to manage and prioritise multiple tasks, delivering against project deadlines Strong communication skills, with experience producing technical documentation and reports Excellent analytical and problem-solving skills, with a keen eye for detail Desirable Experience: Experience in the Defence / Aerospace or safety regulated environment would be advantageous. Even If you feel like you don't meet every requirement, we encourage you to reach out and apply.

MB326: Weapons Trainer Location: Lyneham Salary: £36,227 - £38,787 Working Hours: 07:30am - 16:30pm Mon to Fri (early finish on a Wednesday) Additional Company Benefits: PPE Supplied, Exceptional Career Development Opportunities, Heavily Discounted Gym Membership, Enhanced Pension Contributions Overview: First Military Recruitment is proudly working in partnership with a fantastic International Defence business who are looking to recruit multiple Weapons Trainers on a permanent basis due to growth based at their Lyneham depot. Duties and Responsibilities: Your role will entail the training of highly motivated students in all aspects of the trade, stripping and assembling, fault finding & repairs on most of the current in-service weapon systems. Within this role, you will be working as part of a highly motivated team, in a job that offers the highest level of job satisfaction along with an excellent work life balance. To prepare relevant training material, if necessary involving Media and Graphics Department input to provide relevant Weapons Training and maintain personal Course Training Plans (CPD) portfolio in respect of new technologies and equipment ensuring that lesson plans are training sessions are developed in accordance of the approved Course Training Plans (CTP). Ensuring student development through monitoring, feedback appraisal, discipline and training interventions, ensuring all supporting documentation is maintained and that any special student developmental needs or training delays are flagged to the Lead Trainer (LT). Delivery of remedial training and revision as necessary. Assessment of trainees to include: Creation of written examination and progress test papers, Creation of practical assessment/examination scenario and continuous assessments. Invigilation of examination and assessments. Successful candidate will work within the existing training team delivering high quality military apprentice training. Responsibility within the Trade Training areas for cleanliness, security, Health, Safety and Welfare (HSW), Control of Substances Hazardous to Health (COSHH) and environmental and engineering hygiene, ensuring that all students are fully aware of these requirements. Supervision of Students and Visitors to ensure full compliance with relevant H&S & PPE requirements and as relevant to the equipment training department, ensuring risks are adequately assessed and minimised. Ensuring that the correct equipment is used for each task. To ensure that procedures are understood and implemented in the course of carrying out any work tasks. Full training provided culminating in a Level 4 qualification (CET) Skills and Qualifications: An Armourer or Multi skilled mechanical engineer with high level of experience who would relish the challenge of a new job role. Engineering teaching experience in further education Minimum CGLI City & Guilds part 3 or above, NVQ Level 3 or equivalent military qualification. Minimum 5 years experience in engineering Have good craft/technical skills PC literate with Powerpoint and Word You must hold or have ability to obtain Baseline Personnel Security Standard (BPSS) security clearance MB326: Weapons Trainer Location: Lyneham Salary: £36,227 - £38,787 Working Hours: 07:30am - 16:30pm Mon to Fri (early finish on a Wednesday) Additional Company Benefits: PPE Supplied, Exceptional Career Development Opportunities, Heavily Discounted Gym Membership, Enhanced Pension Contributions

Job Title: Sheet Metal Worker Location: Glasgow, Govan and Scotstoun, Onsite - Must be able to attend a recruitment day in Glasgow Salary: £40,016 - plus 33% shift allowance where applicable Shift Pattern: Days - Mon-Thurs, 07:00-16:30, Nights - Mon-Thurs 20:30-06:00, Weekends - Fri-Sun, 07:00-19:30 Requirements: Modern Apprenticeship / Trade Papers must be provided when submitting your application Who we are: Join BAE Systems and you'll be part of something bigger. As a valued member of our global colleague network, you'll bring your unique skills and perspectives to help pioneer progress and protect what matters most. You'll be trusted to play your part in delivering the advanced, technology-led defence, aerospace and security solutions of tomorrow, shaping a safer future, for all of us. From the depths of the ocean, to the far reaches of space, there's no limit to where a career at BAE Systems could take you. What you'll be doing: Manufacture and install high quality sheet metal components, including ventilation systems and internal fittings Interpret engineering drawings to measure, cut, shape and assemble materials using a range of hand and power tools Produce accurate, well finished work that meets required standards and quality expectations Apply practical problem solving skills to resolve issues during manufacturing and installation, ensuring correct fit and safe completion Work collaboratively within a skilled team to maintain a safe environment and deliver reliable installations that keep projects on track Essential skills: You will hold a recognised Modern Apprenticeship, Trade Papers, or SVQ/NVQ Level 3 qualification (or equivalent) In this role, you'll bring experience from construction, manufacturing, marine, or other practical engineering environments You'll be applying your understanding of SHE and COSHH requirements, following safe working practices and safety training Working with engineering drawings, you'll measure, cut, shape, and assemble components accurately and safely You can demonstrate solid attention to detail, using your craftsmanship skills to deliver accurate, high-quality work The Sheet Metal Worker Team: The team delivers upgrades, refurbishments, and new installations across secure BAE Systems sites, working in groups of 6-12. A qualified Sheet Metal Worker contributes to high quality HVAC and furniture manufacture, supported by SVQ3 Marine Engineering, NC/HNC Fabrication and Welding and post apprenticeship industrial experience. Why BAE Systems? Here you'll build a career with purpose and limitless possibilities. With lifelong learning and meaningful work, this is a place where you can grow your career with confidence and be empowered to be your best. You'll be recognised for your contribution and enjoy rewards tailored to what's most important to you and your family, support for your financial and personal wellbeing, as well as a balanced lifestyle. In an environment embracing sustainable ways of working and with a strong sense of shared purpose, our supportive culture is a place you can feel you belong and proud of the difference you make. A place where everyone can thrive: We're committed to building an inclusive workplace where everyone feels valued and supported. We know that a diversity of backgrounds, perspectives and experiences strengthens our teams and is vital to the work we do. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date: 12th June 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible.

The company are a multi-national group, being No 1 in Europe for what they do! With a number of awards and recognitions, with great career progression and opportunities across the business! Important: All applicants must be able to obtain Security Clearance and must hold British Nationality as their primary nationality. Working: The role is a 4-5 day a week onsite role and is on a secure site where SC clearance is needed. Join a business at the forefront of innovation, with a lot to offer! A company backed by a record multi-year order book, offering long-term stability and sustained investment, with years of secured work ahead! Company Highlights: Be part of an organisation that invests in its people and their long-term success: Join a company who are a global leader in defence innovation, known not only for its technological excellence but also for its outstanding workplace culture. A reputable business who, have a number of awards and recognitions, including Sunday times 'Best Places to Work 2024'. Recognised as a 'Most Loved Organisation' A organisation passionate about it's people with accreditations such as 'Investors in People 'We Invest in People' (Gold) & Investors in People 'We Invest in Wellbeing' (Platinum) - the highest level of accreditation. Passionate advocates for Equity, Diversity & Inclusion, with 10+ employee networks. Committed employer of veterans and service leavers, awarded as one of the Top 15 Great British Employers of Veterans in the Forces in Business Awards 2025 and Gold member of 'The 5% Club'. Armed Forces Covenant (Gold). Be part of a growing team, involved in an international product range, and influencing today's most advanced innovations! Full range of company benefits, flexible working, training, development, and clear career progression! Evolving business, with formal training programmes covering both technical and soft skills, complemented by lunchtime learning sessions, language courses, and supported self-study, with access to thousands of online courses and learning resources. We are seeking a Principal Test Engineer to join our Manufacturing organisation, supporting the introduction of test systems, as well as the testing and diagnostics of electrical and electronic systems and sub-assemblies during their development and early production phases. As part of the UK Manufacturing Test Engineering function, you will be embedded within the Manufacturing Equipment team. This team plays a key role in development testing and ensuring new products and their associated test solutions are fully prepared for production. Responsibilities: Provide Test Engineering expertise throughout the design and development lifecycle, from initial concept through to Production Readiness Review and release to Operations. Support the introduction of test facilities, ensuring robust configuration control of equipment and facilities prior to use, including the creation of test specifications and operator instructions. Conduct testing of electrical and electronic systems, sub-assemblies, and circuit cards, diagnosing development test failures down to circuit card and, where necessary, component level. Identify and recommend corrective and remedial actions to resolve technical issues. Collaborate closely with Operations, design teams, and key stakeholders to overcome engineering challenges. Offer technical guidance to the Test Engineering Team Lead and provide mentoring to less experienced engineers within the team. You will join a small, dedicated team of engineers within a fast-paced yet supportive and inclusive manufacturing environment. The team brings together a diverse mix of talent, from apprentices and graduate engineers to highly experienced technical specialists, all committed to delivering technical excellence across a range of products in both development and production. Essential Skills & Experience A minimum of HNC or equivalent qualification in a relevant discipline (with HND or degree level preferred), combined with substantial experience in the manufacture and testing of digital, analogue, and RF electronic systems. A strong understanding of electrical, electronic, and RF measurement principles, along with practical experience of test equipment and systems-level functional testing. Proven experience across the product development lifecycle within an electronics manufacturing environment, including associated processes and best practices. Extensive hands-on experience with both manual and automated test equipment, ideally gained within a defence or similarly regulated manufacturing environment. The ability to effectively plan and prioritise workload, managing multiple tasks to meet project objectives while remaining responsive to team support requirements. Strong communication skills, both written and verbal, with experience in collaborative team environments. This includes the ability to produce high-quality documentation such as test specifications, operator instructions, and technical reports from higher-level requirements. Desirable Experience: Experience in the Defence / Aerospace or safety regulated environment would be advantageous. Even if you feel like you don't meet every requirement, we encourage you to reach out and apply.

Job Title: Sheet Metal Worker Location: Glasgow, Govan and Scotstoun, Onsite - Must be able to attend a recruitment day in Glasgow Salary: £40,016 - plus 33% shift allowance where applicable Shift Pattern: Days - Mon-Thurs, 07:00-16:30, Nights - Mon-Thurs 20:30-06:00, Weekends - Fri-Sun, 07:00-19:30 Requirements: Modern Apprenticeship / Trade Papers must be provided when submitting your application Who we are: Join BAE Systems and you'll be part of something bigger. As a valued member of our global colleague network, you'll bring your unique skills and perspectives to help pioneer progress and protect what matters most. You'll be trusted to play your part in delivering the advanced, technology-led defence, aerospace and security solutions of tomorrow, shaping a safer future, for all of us. From the depths of the ocean, to the far reaches of space, there's no limit to where a career at BAE Systems could take you. What you'll be doing: Manufacture and install high quality sheet metal components, including ventilation systems and internal fittings Interpret engineering drawings to measure, cut, shape and assemble materials using a range of hand and power tools Produce accurate, well finished work that meets required standards and quality expectations Apply practical problem solving skills to resolve issues during manufacturing and installation, ensuring correct fit and safe completion Work collaboratively within a skilled team to maintain a safe environment and deliver reliable installations that keep projects on track Essential skills: You will hold a recognised Modern Apprenticeship, Trade Papers, or SVQ/NVQ Level 3 qualification (or equivalent) In this role, you'll bring experience from construction, manufacturing, marine, or other practical engineering environments You'll be applying your understanding of SHE and COSHH requirements, following safe working practices and safety training Working with engineering drawings, you'll measure, cut, shape, and assemble components accurately and safely You can demonstrate solid attention to detail, using your craftsmanship skills to deliver accurate, high-quality work The Sheet Metal Worker Team: The team delivers upgrades, refurbishments, and new installations across secure BAE Systems sites, working in groups of 6-12. A qualified Sheet Metal Worker contributes to high quality HVAC and furniture manufacture, supported by SVQ3 Marine Engineering, NC/HNC Fabrication and Welding and post apprenticeship industrial experience. Why BAE Systems? Here you'll build a career with purpose and limitless possibilities. With lifelong learning and meaningful work, this is a place where you can grow your career with confidence and be empowered to be your best. You'll be recognised for your contribution and enjoy rewards tailored to what's most important to you and your family, support for your financial and personal wellbeing, as well as a balanced lifestyle. In an environment embracing sustainable ways of working and with a strong sense of shared purpose, our supportive culture is a place you can feel you belong and proud of the difference you make. A place where everyone can thrive: We're committed to building an inclusive workplace where everyone feels valued and supported. We know that a diversity of backgrounds, perspectives and experiences strengthens our teams and is vital to the work we do. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date: 12th June 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible.

Job Title: Principal Engineer -Site Asset Safety Verification Location: Barrow-in-Furness. Hybrid - once a quarter onsite We offer a range of hybrid and flexible working arrangements - please speak to your recruiter about the options for this particular role Salary: £60,000 depending on experience Who we are: Join BAE Systems and you'll be part of something bigger. As a valued member of our global colleague network, you'll bring your unique skills and perspectives to help pioneer progress and protect what matters most. You'll be trusted to play your part in delivering the advanced, technology-led defence, aerospace and security solutions of tomorrow, shaping a safer future, for all of us. From the depths of the ocean, to the far reaches of space, there's no limit to where a career at BAE Systems could take you. Job Description: As a member of the Site Engineering Nuclear Substantiation team Your role is responsible for authoring and managing site assets' & infrastructure design substantiation documentation supporting the site nuclear safety case. This will include reviewing analyses , assessments, and calculations supporting nuclear design substantiation. You'll support periodic review of safety. You'll take ownership of deliverables and demonstrate high levels of autonomy and leadership . Core duties: You will support the implementation of design substantiation requirements. You will work closely with a broad range of stakeholders including Site Safety Case, Human Factors, and Engineering Authority Teams. You will collaborate with the wider business on site assets nuclear design substantiation related activities. Essential Skills: You will bring your experience in a complex or high-risk industry (i.e. Aerospace, Oil & Gas, OME, Shipbuilding, Weapons etc.) to this role You will be degree qualified or time served apprentice in a STEM subject or equivalent working experience You will showcase your ability to produce high quality technical reports The Site Engineering - Nuclear Substantiation Team: You will be joining a key team with some great development opportunities both in the technical and managerial streams. Native to the team, there are opportunities to get involved in the design substantiation and safety justification of a variety of site assets and facilities spanning mechanical, civil and structural. This role offers plenty of development opportunities through various avenues, engaging cross functionally to help drive and deliver an exceptionally varied and diverse scope, to suite you and your career aspirations. This could be an exciting and fulfilling opportunity waiting for you at the Nuclear Substantiation team - SEA (DDC) at BAE Systems. . We offer relocation support packages across all Submarine roles, subject to meeting eligibility criteria. Why BAE Systems? Here you'll build a career with purpose and limitless possibilities. With lifelong learning and meaningful work, this is a place where you can grow your career with confidence and be empowered to be your best. You'll be recognised for your contribution and enjoy rewards tailored to what's most important to you and your family, support for your financial and personal wellbeing, as well as a balanced lifestyle. In an environment embracing sustainable ways of working and with a strong sense of shared purpose, our supportive culture is a place you can feel you belong and proud of the difference you make. A place where everyone can thrive: We're committed to building an inclusive workplace where everyone feels valued and supported. We know that a diversity of backgrounds, perspectives and experiences strengthens our teams and is vital to the work we do. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date: 24th June 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible.

Job Title: Electrical Design Engineer Location: Portsmouth Naval Base, Onsite We offer a range of hybrid and flexible working arrangements - please speak to your recruiter about the options for this particular role Salary: Up to £43,500 dependent on skills and experience Who we are: Join BAE Systems and you'll be part of something bigger. As a valued member of our global colleague network, you'll bring your unique skills and perspectives to help pioneer progress and protect what matters most. You'll be trusted to play your part in delivering the advanced, technology-led defence, aerospace and security solutions of tomorrow, shaping a safer future, for all of us. From the depths of the ocean, to the far reaches of space, there's no limit to where a career at BAE Systems could take you. Job Description: This role provides electrical design and integration support for the introduction of new systems and equipment across maritime platforms. It covers the full design lifecycle, from early feasibility and ship survey activities through to detailed electrical design and installation documentation. Core duties: Production of Installation Design Solutions including Electrical/System Drawings, Cable Routes, Data Sheets, Bills of Materials Liaison with MoD Customer and Industry Partners throughout Design process developing agreed Equipment Integration Requirements Undertake Ship Surveys supporting Design Integration, Material State Reports, Configuration Control and Power Load Charts Configuring and Maintaining Ship Databases for Electrical Power Distribution and Blown Fibre Networks Production of Ship and Equipment Feasibility Studies Collaborate with in-house Mechanical, Structural, HVAC and Project Management Teams Collaborate with Industry Partners and Technical Authorities Support Ship-build and Submarine electrical detailed design activities Provide technical input to Product Safety of Design Services deliverables Essential Skills: Knowledge of Electrical Systems theory Interpretation and application of Electrical Design Standards Working knowledge of Electrical Installation Practices and Electrical Distribution Systems Working knowledge/understanding of CAD/Engineering Drawing Toolsets IT literate in Microsoft Office applications ONC/HNC in Electrical Engineering or equivalent The Design Services - Electrical Team: Our Team of engineers is sourced from a combination of Industry, Armed Forces Service Leavers and our own BAE Apprenticeship Schemes. Working in tandem with our Structures & Outfit, HVAC, Mechanical & Piping and Safety Teams we provide through life electrical engineering support to all Royal Naval Surface Fleet, Royal Fleet Auxiliary and Submarine Platforms. Why BAE Systems? Here you'll build a career with purpose and limitless possibilities. With lifelong learning and meaningful work, this is a place where you can grow your career with confidence and be empowered to be your best. You'll be recognised for your contribution and enjoy rewards tailored to what's most important to you and your family, support for your financial and personal wellbeing, as well as a balanced lifestyle. In an environment embracing sustainable ways of working and with a strong sense of shared purpose, our supportive culture is a place you can feel you belong and proud of the difference you make. A place where everyone can thrive: We're committed to building an inclusive workplace where everyone feels valued and supported. We know that a diversity of backgrounds, perspectives and experiences strengthens our teams and is vital to the work we do. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date: 12th June 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible.

Job Title: Sheet Metal Worker Location: Glasgow, Govan and Scotstoun, Onsite - Must be able to attend a recruitment day in Glasgow Salary: £40,016 - plus 33% shift allowance where applicable Shift Pattern: Days - Mon-Thurs, 07:00-16:30, Nights - Mon-Thurs 20:30-06:00, Weekends - Fri-Sun, 07:00-19:30 Requirements: Modern Apprenticeship / Trade Papers must be provided when submitting your application Who we are: Join BAE Systems and you'll be part of something bigger. As a valued member of our global colleague network, you'll bring your unique skills and perspectives to help pioneer progress and protect what matters most. You'll be trusted to play your part in delivering the advanced, technology-led defence, aerospace and security solutions of tomorrow, shaping a safer future, for all of us. From the depths of the ocean, to the far reaches of space, there's no limit to where a career at BAE Systems could take you. What you'll be doing: Manufacture and install high quality sheet metal components, including ventilation systems and internal fittings Interpret engineering drawings to measure, cut, shape and assemble materials using a range of hand and power tools Produce accurate, well finished work that meets required standards and quality expectations Apply practical problem solving skills to resolve issues during manufacturing and installation, ensuring correct fit and safe completion Work collaboratively within a skilled team to maintain a safe environment and deliver reliable installations that keep projects on track Essential skills: You will hold a recognised Modern Apprenticeship, Trade Papers, or SVQ/NVQ Level 3 qualification (or equivalent) In this role, you'll bring experience from construction, manufacturing, marine, or other practical engineering environments You'll be applying your understanding of SHE and COSHH requirements, following safe working practices and safety training Working with engineering drawings, you'll measure, cut, shape, and assemble components accurately and safely You can demonstrate solid attention to detail, using your craftsmanship skills to deliver accurate, high-quality work The Sheet Metal Worker Team: The team delivers upgrades, refurbishments, and new installations across secure BAE Systems sites, working in groups of 6-12. A qualified Sheet Metal Worker contributes to high quality HVAC and furniture manufacture, supported by SVQ3 Marine Engineering, NC/HNC Fabrication and Welding and post apprenticeship industrial experience. Why BAE Systems? Here you'll build a career with purpose and limitless possibilities. With lifelong learning and meaningful work, this is a place where you can grow your career with confidence and be empowered to be your best. You'll be recognised for your contribution and enjoy rewards tailored to what's most important to you and your family, support for your financial and personal wellbeing, as well as a balanced lifestyle. In an environment embracing sustainable ways of working and with a strong sense of shared purpose, our supportive culture is a place you can feel you belong and proud of the difference you make. A place where everyone can thrive: We're committed to building an inclusive workplace where everyone feels valued and supported. We know that a diversity of backgrounds, perspectives and experiences strengthens our teams and is vital to the work we do. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date: 12th June 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible.

Job Title: Sheet Metal Worker Location: Glasgow, Govan and Scotstoun, Onsite - Must be able to attend a recruitment day in Glasgow Salary: £40,016 - plus 33% shift allowance where applicable Shift Pattern: Days - Mon-Thurs, 07:00-16:30, Nights - Mon-Thurs 20:30-06:00, Weekends - Fri-Sun, 07:00-19:30 Requirements: Modern Apprenticeship / Trade Papers must be provided when submitting your application Who we are: Join BAE Systems and you'll be part of something bigger. As a valued member of our global colleague network, you'll bring your unique skills and perspectives to help pioneer progress and protect what matters most. You'll be trusted to play your part in delivering the advanced, technology-led defence, aerospace and security solutions of tomorrow, shaping a safer future, for all of us. From the depths of the ocean, to the far reaches of space, there's no limit to where a career at BAE Systems could take you. What you'll be doing: Manufacture and install high quality sheet metal components, including ventilation systems and internal fittings Interpret engineering drawings to measure, cut, shape and assemble materials using a range of hand and power tools Produce accurate, well finished work that meets required standards and quality expectations Apply practical problem solving skills to resolve issues during manufacturing and installation, ensuring correct fit and safe completion Work collaboratively within a skilled team to maintain a safe environment and deliver reliable installations that keep projects on track Essential skills: You will hold a recognised Modern Apprenticeship, Trade Papers, or SVQ/NVQ Level 3 qualification (or equivalent) In this role, you'll bring experience from construction, manufacturing, marine, or other practical engineering environments You'll be applying your understanding of SHE and COSHH requirements, following safe working practices and safety training Working with engineering drawings, you'll measure, cut, shape, and assemble components accurately and safely You can demonstrate solid attention to detail, using your craftsmanship skills to deliver accurate, high-quality work The Sheet Metal Worker Team: The team delivers upgrades, refurbishments, and new installations across secure BAE Systems sites, working in groups of 6-12. A qualified Sheet Metal Worker contributes to high quality HVAC and furniture manufacture, supported by SVQ3 Marine Engineering, NC/HNC Fabrication and Welding and post apprenticeship industrial experience. Why BAE Systems? Here you'll build a career with purpose and limitless possibilities. With lifelong learning and meaningful work, this is a place where you can grow your career with confidence and be empowered to be your best. You'll be recognised for your contribution and enjoy rewards tailored to what's most important to you and your family, support for your financial and personal wellbeing, as well as a balanced lifestyle. In an environment embracing sustainable ways of working and with a strong sense of shared purpose, our supportive culture is a place you can feel you belong and proud of the difference you make. A place where everyone can thrive: We're committed to building an inclusive workplace where everyone feels valued and supported. We know that a diversity of backgrounds, perspectives and experiences strengthens our teams and is vital to the work we do. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date: 12th June 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible.

Job: Welder Location: Govan/Scotstoun (Glasgow), United Kingdom Salary & Shifts: Range of payrates based on shift patterns, full breakdown below Contract length: 10 months (extensions available) Contracted hours: 37 hours (overtime available) Rate card: Available on request Morson are partnered up with a prestigious defence client (leader in the Defence and Security sector) in search for time served Welders. You ll be part of an inclusive culture that values diversity, rewards integrity, and merit, and where you ll be empowered to fulfil your potential. What is expected from me? As a qualified Welder you will have an important role within the business to stay professional throughout your contract delivering to the highest standard ensuring Safety, Health and Environmental regulations are followed. Job Description - Welding different materials (carbon & stainless steel & aluminium) - Welding using different welding processes i.e., Manual Metal Arc, Metal Active Gas, Metal Inert Gas, Automatic & Semi-Automatic Machine Welding (Submerged Arc & KAT) & Resistance Welding (Stud Welding) - Welding butts and fillets to a high standard - Main process FCAW / MAG using ceramic tiles Requirements - Qualifications & Compliance: Holds a full Engineering Modern Apprenticeship, trade papers. - Flux core arc welding experience - Knowledge and experience in Welding and use of associated equipment - Must be comfortable working in confined spaces and or at height - Safety certification i.e. SHE Induction, COSHH Awareness, working at height etc - Background in marine, Oil and Gas, major construction / manufacturing environment Benefits - Build your portfolio by working on advanced defence project - Provide security for our country and allies for decades to come - Permanent opportunities with leader in the defence and security sector Next steps - If interested in finding out more information regarding the role, please click apply and one of the team members will be in touch to discuss the role further