28 jobs found

Digital / GPS / HFR Plant Fitter About Flannery Plant Hire: Flannery Plant Hire is a leading provider of operated and self-drive plant equipment, with a strong reputation for delivering high-quality, reliable machinery to the UK s largest infrastructure and construction projects. We are proud to be at the forefront of innovation and sustainability in plant hire, embracing the latest technology to support our clients and operators. Field Service Engineer Purpose: The Plant Fitter will be responsible for the servicing, maintenance, and calibration of digital systems installed on construction plant equipment, including GPS Machine Control systems and Human Form Recognition (HFR) safety technology. This is a mobile role working on plant machinery out on customer sites. The role focuses on preparing machinery with the required digital technology before it is deployed to operational sites. This also includes the checking and verification of all off hired plant and reporting and resolving all defects to the site foreman. Full training will be provided to our new Field Service Engineer to develop knowledge in machine control technology, plant electronics, and digital construction systems. Field Service Engineers Key Responsibilities Installation & System Integration • Install and configure GPS Machine Control systems on construction plant machinery including excavators, dozers, and graders. • Install and commission Human Form Recognition (HFR) safety systems designed to detect personnel around plant equipment. • Carry out sensor installation, GPS antenna mounting, wiring, and system configuration within the depot workshop. Service & Maintenance • Perform routine servicing, testing, and maintenance of machine control and HFR systems. • Diagnose and repair electrical, electronic, and mechanical faults relating to installed technology. • Ensure all equipment is functioning correctly prior to deployment. Calibration & System Checks • Calibrate sensors, machine control components, and system parameters to ensure accurate operation. • Conduct system testing and accuracy checks within the depot environment. Data Handling & Machine Setup • Upload machine control data including DTM files and digital terrain models where required. • Assist with system configuration and data preparation using office-based computer systems. Workshop Support • Work alongside workshop engineers to ensure machinery is fully prepared and compliant with operational requirements. • Assist with equipment preparation, upgrades, and system improvements. The Field Service Engineer will need : • Experience working with construction plant, agricultural machinery, or heavy equipment. • Background as a mechanical technician, or workshop engineer is desirable. • Basic understanding of mechanical, electrical installations. • Comfortable working with computers and electronic equipment. • Full UK driving licence desirable. Key Skills & Attributes • Strong mechanical and technical aptitude • Attention to detail and accuracy • Problem-solving and fault-finding ability • Positive attitude and willingness to learn new technologies • Ability to work effectively within a workshop team • Flexible and proactive approach to work Additional Information • Static, depot-based role • Occasional travel may be required for training purposes only • Full training provided in GPS Machine Control and HFR technology • Company equipment such as laptop and mobile phone provided where required If this Field Service Engineer role is of interest, click apply now.

WHAT IS IN IT FOR YOU? Permanent role Tyne & Wear location Day Shift Only (37-hour week) £20 per hour or Salary £38,480 per annum depending on experience Monday to Thursday 8am 4:30pm & Friday 8am 11am (30 mins lunch plus 2 x 15 min breaks) 26 days leaves increasing to 31 with 5 years service, plus bank holidays Sick pay available increasing with length of service Access to training and development opportunities Opportunity to purchase up to 4 weeks additional leave per year Three days paid leave per year to do voluntary work Employee wellbeing support for mental and physical health Car lease scheme Corporate gym membership and access to Civil Service Sports Council offers Cycle to work scheme Discounted public travel pass Discounts on local threate and sports events Stand-by allowance if decide to form part of the call out rota rarely called out but minimum of 4 hours pay if so THE BUSINESS Westray Recruitment Group is seeking to recruit a Plant Fitter who has experience maintaining and servicing cranes to work within a busy port-based setting in Tyne & Wear. You will work to repair various types of cranes such as hydraulic, mobile, dockside, gantry and rope crane, etc. THE ROLE Working to maintain and repair various cranes found within the port setting such as hydraulic, rope and mobile, gantry and dockside cranes Installing, repairing and replacing damaged or defective parts Assisting with basic facilities upkeep of the site Dealing with deadlines, interruptions, and conflicting demands, ensuring that all work and documentation are completed within appropriate timeframes. Taking corrective action to resolve any identified faults / issues. Appropriately escalating matters to management when required. Assisting colleagues to carry out scheduled services and repairs to plant equipment and infrastructure. Reading and interpreting technical drawings Adhering to port safety protocols, including confined space entry, working at heights, and hot work procedures. Undertaking work independently. Willing to work with minimal supervision following set procedures. Ensuring work is carried out accurately and in an organised and effective way. THE PERSON NVQ Level 3 in a suitable engineering related discipline Experienced working with cranes for example, hydraulic, mobile, dockside, gantry and rope crane, etc. Able to work outdoors in all the elements Experienced delivering Plant Fitting duties Experienced working with hydraulic systems and able to work with AC/DC motors Ability to undertake mechanical fitting and repairs of port infrastructure, machinery and equipment. Ideally experience working within industrial, maritime, and/or port environments. Driving license TO APPLY Please send your updated CV to Tony Hutchinson or apply direct by calling Westray Recruitment Group

Trailer Technician / Fitters (Skilled and Trainees with relevant mechanical experience) Spider is advertising on behalf of a trusted full-service trailer maintenance and repair specialist, providing comprehensive trailer servicing, inspections, MOT preparation, quay checks, fleet maintenance, and 24/7 roadside breakdown support. They seeking skilled Trailer Technicians / Trailer Fitters to join our well-established and respected team based in Harworth, Doncaster. Company benefits include: Competitive Salary: Skilled fitters can expect a base salary of around £38,000 per annum depending on experience, with realistic potential annual earnings of £45,000+ Other benefits: Double time pay for all non-rostered overtime Holiday pay calculated on average earnings Increased holiday entitlement with length of service Annual performance-related bonus As a Trailer Technician / Fitter, your key responsibilities will include: Carrying out trailer servicing, maintenance, repairs, inspections, and breakdown support as required Preparing trailers and commercial vehicle equipment for MOT inspections and compliance checks Attending roadside breakdowns and undertaking repairs and servicing at customer sites Diagnosing and rectifying mechanical, hydraulic, pneumatic, and electrical trailer faults Following company procedures, safe systems of work, and Health & Safety regulations Working efficiently, responsibly, and to agreed deadlines while maintaining high standards of workmanship A C+E licence would be advantageous (training can be provided if required) About you: For the Trailer Technician / Trailer Fitter role, you'll bring relevant mechanical, engineering, vehicle maintenance, HGV, LGV, plant, agricultural, fleet maintenance, or trailer repair experience. Previous experience working on trailers, commercial vehicles, heavy goods vehicles, agricultural machinery, plant equipment, or similar mechanical systems would be highly beneficial. Strong fault-finding abilities, attention to detail, time management skills, and the ability to work independently or as part of a team are essential. A full UK driving licence is required. We also welcome applications from those with less experience. If you have a mechanical background or training, we can provide further development. Trainee Fitters with mechanical skills can expect to earn between £34,000 - £38,000 per year, depending on experience and overtime. About them: They are not just about trailers but about creating a collaborative and dynamic environment where every team member plays a vital role in our success story. Established in 1997, their reputation for excellence is unmatched, and joining them means becoming part of a legacy of quality and innovation in trailer repairs and servicing. This is a fantastic opportunity to join a company who invests heavily in modern technology, equipment, and training. Providing an environment where you can develop your skills and technical knowledge to maximise your earning potential. If you have the relevant skills and experience for the Trailer Technician / Fitter role and would like to apply please forward an up-to-date CV as soon as possible. We look forward to hearing from you. No Recruitment Agencies please Please check your email inbox and spam / junk mail folder for any email correspondence for this Vacancy. If you require any reasonable adjustments such as access or information in an alternative format, please inform us soon as you are able so that we can make the appropriate adjustments. This vacancy is advertised and handled through Spider, the region s Online Job Advertiser on our behalf. We both take your privacy seriously. When you apply, your details are processed and available for us to directly review for this vacancy. As you might expect you may be contacted by email, text, or telephone. For full Privacy Policy details please see email correspondences on receipt of your application

Overview We are currently recruiting for a Commercial Pipefitter on behalf of a specialist utility services company who provide installation, maintenance, metering and billing services to customers throughout the Uk. Operating for over 15 years now, they are a fast growing reputable company with over 70 employees. They are an award-winning heat network services provider. The Commercial Pipefitter / Mechanical Installations Engineer is a senior field-based role responsible for the delivery of commercial mechanical pipework installations, modifications, maintenance, and commissioning support across district heating, plant room, metering, and energy infrastructure projects. The role requires a highly competent and self-sufficient engineer with strong experience across commercial pipework systems, including steel, copper, and plastic pipe installations across medium and large diameter commercial systems. The successful candidate will take ownership of projects from initial site assessment and scoping through to installation, testing, commissioning support, documentation, and handover. This is a permanent position, covering London, working Monday to Friday 37.5 hours per week. The basic salary is paying 50k - 60k per annum depending on experience. Other perks include van & fuel card which can be used for personal use, pension, 25 days annual leave plus bank holidays, overtime and Development & training opportunities. Responsibilities Carry out commercial pipework installations, modifications, repairs, and upgrades across heating, chilled water, and mechanical systems. Install and modify medium and large diameter commercial pipework systems. Work competently across a variety of pipe materials including: Copper, Carbon steel, Stainless steel and Plastic pipe systems. Carry out and oversee a variety of jointing methods including: Press-fit systems, Threaded pipework, Soldered/brazed joints and Flanged connections. Undertake valve replacements, pipework modifications, bypass arrangements, flushing points, strainers, pumps, and associated mechanical components. Support plant room modifications and heating network infrastructure upgrades. Independently scope, plan, and deliver commercial-sized mechanical installations and pipework amendments. Assess site requirements and specify all labour, materials, fittings, plant, tooling, access equipment, and consumables required to complete works. Take full end-to-end ownership of allocated projects from survey through to completion and handover. Liaise with Project Managers and Field Operations management to ensure projects are delivered safely, efficiently, and to specification. Carry out site surveys and technical assessments. Ensure all works are completed in line with: Health & Safety legislation, Company procedures, Site RAMS, Industry standards and best practices. Maintain high standards of workmanship and professionalism on all sites. Carry out reactive and planned plant room maintenance activities where required. Communicate effectively with clients, residents, contractors, and internal teams. Provide regular updates on progress, risks, delays, and technical issues. Manage van stock, tools, equipment, and materials responsibly. Skills & Attributes NVQ Level 2 or 3 in Plumbing & Heating or Mechanical Engineering desirable. Strong commercial pipefitting and mechanical installation experience. Proven experience working on commercial heating, LTHW, CHW, or district heating systems. Strong experience working on medium and large diameter commercial pipework systems. Heat meter installation experience highly advantageous, particularly DN100 flanged meters. Must hold CSCS card (or able to get one). Full UK Driving Licence. Note:- Apex Resourcing Solutions are acting as an Employment Agency

Mechanical Assembler Exceptionally busy manufacturing company require two additional Mechanical Assemblers / Mechanical Fitters due to an upturn in business. The work is very varied and requires you to build complete machinery units from start to finish. Excellent, modern working environment, tools and conditions. Friendly, experienced team who are good at training new team members. Location: Evesham, Easily commutable from Redditch , Pershore , Worcester , Upton upon Severn , Tewkesbury , Bidford-on-Avon Hours: Full time Monday to Friday, no shifts The Mechanical Assembler Role: The role will involve assembling / fitting a wide range of large metallic components in the production of new machinery. Using a variety of hand and air tools to assemble a wide range of interesting equipment on a small-batch basis. Reading/following clear engineering drawings. The role is based in a clean, very well-ordered Workshop with good quality tools and equipment provided. Great team atmosphere with good training and support for new or less experienced members of the Team. Excellent opportunities for technical development or consideration for maintenance or service type roles. Skills/attributes required for The Mechanical Assembler role: Confidence in using a variety of hand tools such as socket sets , spanners , screw drivers, pliers, torque wrenches etc. Read and interpret basic engineering drawings. Be able to solve mechanical issues regarding mechanical fitting. Work to tight quality standards and to uphold safe practices. Applicants who have been mechanics, mechanical assemblers or mechanical fitters / REME at all levels are welcomed to apply. Additionally, if you have completed a college course in mechanics / car maintenance etc , please apply. Benefits: Contributory pension. Above-average holidays plus Bank Holidays. Closed for 2 weeks at Christmas. Free parking and PPE Lots of overtime at enhanced rates. Please forward your CV to apply. If you have the above skills but don't have a CV or would like help or advice in putting one together, we can do that for you - please apply and we can support you as we progress. Trinity Recruitment is acting as an Employment Agency in regard to this permanent vacancy.

Mobile Heavy Plant Engineer Home Based/Covering Scotland 45,500 (rising to 46,000 after 3 month probation) Door to Door Pay + Company Van, Fuel Card + Overtime + No Nights + No Call Out + Company Benefits Are you experienced in Heavy Plant Maintenance and looking for a varied field service role with excellent earning potential and genuine career development opportunities? This is an opportunity to become part of a close-knit team where employees are genuinely valued, ideas are welcomed, and career development is actively encouraged. Working within an industry that plays a vital role in supporting environmental sustainability, you'll have the chance to make a real impact while enjoying excellent earning potential and job security. Due to continued expansion, they are seeking an experienced Mobile Heavy Plant Fitter to support customers across Scotland. The Role: Reactive and planned maintenance including breakdown, repairs and replacements of motors, gearboxes, conveyors, etc. Strip machine assemblies to component level and rebuild. You'll work on a diverse range of specialist recycling, waste processing and forestry equipment, including shredders, screeners, trommels, chippers, separation systems and material handling equipment from leading manufacturers such as HAAS, JENZ, Pronar and Bruce Engineering The successful candidate would be provided initial and ongoing training with the scope to step up into a Senior Engineer role. Standard hours are 7:30 to 4:30, 42 hours per week The Person: Background considered: Mobile Plant Fitters, Field Service Engineers, Agricultural Engineers, Quarrying Equipment Engineers, Recycling Equipment Engineers and Heavy Plant Technicians with strong hydraulic, mechanical and electrical fault-finding experience. Previous experience working on shredders, screeners, chippers, separation systems and material handling equipment would be advantageous Ex Forces candidates are encouraged to apply and will be offered training (REME, Navy, RAF etc) Reference Number: BBBH(phone number removed) To apply for this role or to be considered for further roles, please click "Apply Now", or contact Sophie Fox at Rise Technical Recruitment. Rise Technical Recruitment Ltd acts an employment agency for permanent roles and an employment business for temporary roles. The salary advertised is the bracket available for this position. The actual salary paid will be dependent on your level of experience, qualifications and skill set and will be decided by our client, the employer. Rise are not responsible or liable for any hiring decisions made by the end client. We are an equal opportunities company and welcome applications from all suitable candidates.

MPI have a requirement for an Aircraft Technicians ideally with Merlin Helicopter experience, however our client will consider other rotary. These roles are based at RNAS Culdrose, Helston, Cornwall. TR12 7RH Competitive Salary with excellent benefits to be discussed on application Full time, Permanent 38 hours per week contracts available, working a day routine Are you looking to develop your career in aviation supporting the Royal Navy? Do you have hands on aircraft experience? What you ll do: Work as an Aircraft Engineering Fitter across IMOS and AESAS contracts Support operational deliverables in a highly regulated environment Ensure all work meets safety, quality, and regulatory standards Raise any risks, quality issues, or customer concerns with team leads Complete admin duties and attending training to grow your skills What you ll need: You have a few years experience of working in an airworthiness environment, with Merlin or rotary wing aircraft experience Previous experience of working with Merlin aircraft systems and support equipment Understanding of Lean Operating Procedures, Naval Air Publications, and Compound Interactive Electronic Technical Publications (CIETP) Understanding of engineering and asset management systems Commitment to safety, COSHH regulations, tool control and quality practices Completion of a Maintenance Human Factors course Safety, precision and teamwork are at the heart of everything we do. Every task contributes to the operational readiness of the Royal Navy and every detail matters. Applicants must be residing in the UK and have been for some time. If non UK Passport holders, applicants will be required to provide proof of right to work.

MERITUS are recruiting for a B1 Licensed Engineer to join a leading rotary wing MRO organisation supporting defence and aviation operations across the UK on a critical aircraft maintenance programme. B1 LICENSED ENGINEER (ROTORCRAFT) - INSIDE IR35 - £60 PER HOUR PAYE/£80.26 PER HOUR UMBRELLA - 6 months - SHAWBURY/OXFORD/RAF VALLEY - SINGLE STAGE FACE TO FACE INTERVIEW PROCESS - SECTOR: DEFENCE & AVIATION MRO Carry out certification of maintenance and repair activities across a fleet of Airbus Helicopters AS350, AS355, AS365, EC120, EC130, EC135, EC145 and EC155 platforms, ensuring continued airworthiness and safe operation of aircraft in line with UK CAA regulations. Lead and certify maintenance inspections and repairs as directed by the Maintenance Supervisor. This is a certifying role requiring a Part 66 B1.3 licence, with responsibility for ensuring all work meets Part 145, Part M and applicable regulatory standards. Provide hands on oversight of airframe, powerplant, mechanical and electrical systems maintenance, including replacement of avionics line replaceable units with appropriate functional testing and verification. Supervise maintenance fitters and support teams, ensuring high standards of workmanship, compliance, and safety across all maintenance activities. Support hangar operations including aircraft movement and general operational housekeeping. Act as a technical leader within the team, maintaining strong awareness of engine and airframe systems, specialised test equipment, and operational maintenance requirements. Work closely with engineering teams and supervisors to support efficient aircraft turnaround, defect rectification, and ongoing airworthiness management. Skills & Attributes Strong leadership capability with the ability to guide and supervise engineering teams in a fast paced rotary wing MRO environment Sound working knowledge of UK CAA regulatory framework including Part 145 and Part M Experience working across rotary wing platforms, ideally Airbus Helicopters product range Ability to work independently and as part of a high performing engineering team Strong communication skills with the ability to engage effectively across operational and technical stakeholders Flexible approach to operational demands and customer requirements in a defence aviation setting Education, Qualifications or Training Essential EASA/UK CAA Part 66 B1.3 Licence Desirable Previous rotary wing experience across platforms Type training on relevant aircraft will be provided where required Responsibilities Deliver scheduled and unscheduled maintenance, inspections, and repairs across rotary wing aircraft in accordance with approved data and regulatory requirements Certify aircraft maintenance activities in line with Part 145 and company procedures Supervise and support licensed and unlicensed engineers within the hangar environment Ensure compliance with safety, airworthiness, and quality standards at all times Support operational delivery including aircraft movement, hangar organisation, and maintenance planning inputs

Mechanical Apprentice Intake 2026 RSE is delighted to welcome applications for our Mechanical Apprentice Intake 2025 across our business units based in Dalgety Bay. This is an exciting opportunity for individuals to join one of the industry s leading Engineering businesses, who are truly innovative in their solutions to the Water industry. You ll receive best-in-class training whilst going through your education and then be given the opportunity to work on a variety of projects throughout the UK, providing technical expertise to our client s. There are no barriers to progression with RSE, so beyond your initial training and development, our wider business can offer you a truly rewarding career. Closing date for applications is 27th of April 2026, and we will be conducting the first series of interviews in May 2026. Following the interview process, placements will start in July 2026. What Do You Need? To be eligible for the Apprenticeship programme, you should: Have achieved National 4 Level Grade in Maths and/or Application of Maths, English and a Science (preferably Physics). Owing to insurance and legal requirement you must be 16 years of age when starting (July 2026). Who Are We? RSE is a trusted clean water technology company, developing market-leading products and solutions for purifying drinking water, recycling wastewater, and cleaning water in industrial processes. We are disrupting the water sector, delivering water treatment products, technologies, and services to clients across the UK. RSE provides offsite modular build solutions using a low-carbon approach compared to traditional construction methods and our unique offering to the market focuses on innovation, efficiency, and excellence. Established in 1982, RSE has grown into one of the most prominent MEICA engineering businesses in the UK water industry. We have created a complete in-house and full-service capability from project inception through to design, fabrication, and delivery by means of installation and commissioning. We additionally have one of the largest servicing and maintenance teams in the market, to ensure we re on hand for all our clients needs. Our service offering presents industry-leading innovative solutions and our dedicated staff play a key role in delivering our sustainability and wider business goals. With over 2000 staff across our group of companies, our strategic ambition will see the business continue to grow as we expand our operations and diversify our products. One of RSE s key focuses is driving servant leadership and giving our people the opportunity and responsibility to take an entrepreneurial approach in their career development. What RSE Offer To build successful teams and drive the level of quality that RSE is renowned for, we know we need the best people in the industry. Not only do we require the relevant skillsets, but we also need people with the right attitude and mentality to thrive and grow in an innovative and fast-paced environment. At RSE, you ll be given every opportunity to set the path of your own career through our Business Streams and work within dynamic teams that will require you to rise to the challenge of working for a market leader. Industry-leading salary based on your experience. A flexible career development path, with no restrictions on where your career can go. Holiday Allowance of 31 days per year, rising to 33 days per year after 2 years service. Holiday Buy / Sell Scheme Company Pension Scheme Cycle to Work Discounted National Gym Membership Professional Fees Paid Employee Discount Platform Access to our network of health professionals including mental health champions and Occupational Health Nurse. In a flourishing sector where there are vast career opportunities available, we believe by leading transformation in the industry our offering to the market means our people have the space to thrive. If you re interested in a career with a company that will harness your skills and provide you with the support to create your own future within the water industry, apply now

SUMMARY Only those points under Senior Supervisor Fitter applies. Provide service and limited work supervision Supervisor Fitter: higher level of supervision Senior Supervisor Fitter: high level of supervision and leadership to complete plant installation, commissioning, equipment maintenance, repair, rebuild, troubleshooting, operator training and warranty commitments at customers operational and construction sites and within a factory assembly premises as required. Complete assigned installation team activities under the direction of the Installation Manager. Senior Supervisor Fitter: Assist Installation Manager in complying with the Construction, Design and Management regulations ESSENTIAL GENERIC DUTIES AND RESPONSIBILITIES include the following. Plan and supervise the work assigned Supervisor Fitter: work assigned may be of higher complexity and scope than undertaken by a Fitter (Supervisor) Senior Supervisor Fitter: work assigned may be of high complexity, scope and value Senior Site Supervisor: preparation of work documentation under the direction of the Installation Manager when required Support scheduled and emergency call outs to clients. Produce written documentation of all activities. Maintain progress against the works program. Check plant and tool certification is in order prior to work commencing. Comply with safe working practices and requirements at all times Plan and perform all work in accordance with established safety procedures and to site Health & Safety conditions. Other duties may be assigned as required. LOCAL DUTIES AND RESPONSIBILITIES include the following; Apply training and competency Fitter (Supervisor): higher level of training and competency Senior Supervisor Fitter: high level of training and competency to the production and use of risk assessments and method statements for the work being undertaken at all times Liaise with the customer at site and ensure work is undertaken and completed to the satisfaction of the customer Supervisor Fitter: attend site meetings with a company Project Engineer, Senior Site Supervisor or equivalent Senior Supervisor Fitter: attend site meetings on behalf of the company Follow company procedures and promptly report quality; health& safety and environmental incidents, issues and risks Building, installing, refurbishing and maintaining specialised and non-specialised equipment. Understanding and assisting the meeting of specifications outlined in engineering drawings, British Standards and Client Specifications Work towards solutions to mechanical engineering problems to enable improvements to quality, safety and speed of manufacture and assembly. Working in higher hazard environments. For example working in confined spaces, at height, with lifting operations, contact with sewage Produce daily site reports, weekly time sheets and expenses, monthly mileage logs and van sheets and any other site specific documents. Identifying and reporting opportunities for improvement, implement change in consultation with Senior Supervisor Fitter Senior Supervisor Fitter: Implement site changes following own review or in consultation with Installation Manager as required Contribute in creating standard and specific documents e.g. Method Statements/Risk Assessments Assist the Installation Manager in installation team employee assessments and performance reviews SUPERVISORY EXPERIENCE Evidence and examples at a work site, of: Health and safety supervision Senior Site Supervisor: H&S leadership extending to installation team Solving and making decisions Supervisor Fitter: more complex decision making than Fitter (Supervisor) Senior Supervisor Fitter: complex decisions Leading and managing change Supervisor Fitter: more complex changes than Fitter (Supervisor) Senior Supervisor Fitter: complex changes Effective communication and preventing and resolving conflict Senior Supervisor Fitter: including negotiation of a resolution Completing work on time, to quality standards and to the satisfaction of the customer Planning other workers and subcontractors work activities. Senior Supervisor Fitter: Large and complex own and subcontracted work scopes Preparing and presenting site safety briefings and toolbox talks. Assessing and managing safety hazards. EDUCATION, TRAINING AND EXPERIENCE As a minimum, a suitable demonstrable level of Health, Safety Training and Environmental awareness and experience and competence for the work assigned. Fitter (Supervisor):Working towards achieving City & Guilds or equivalent in Mechanical Engineering, or willingness to undertake a similar qualification experience of assisting with installing, repairing or maintaining technical, or capital equipment within the Waste/Water industry. CSCS card, SSSTS, C&G Confined space, Slinger Signaler/ crane supervisor Blue Competency Card. Supervisor Fitter: City & Guilds or equivalent in Mechanical Engineering and two years experience supervising, installing, repairing and maintaining technical, or capital equipment within the Waste/Water industry. CSCS Gold card, SSSTS, C&G Confined space, Slinger Signaler/ crane supervisor Blue Competency Card. Senior Supervisor Fitter: City & Guilds or equivalent in Mechanical Engineering and five years experience of complex supervising, installing, repairing and maintaining technical, or capital equipment within the Waste/Water industry. CSCS Gold card, SSSTS, C&G Confined space, Slinger Signaler/ crane supervisor Blue Competency Card, CDM training, First Aid COMMUNICATION SKILLS Effective communication with customers, suppliers and other contractors at all levels on site Ability to understand and both read, write and converse in English. A full understanding of reading and interpreting Engineering drawings. INDEPENDENT JUDGMENT, DECISION MAKING & PROBLEM SOLVING: Willingness to make decisions requiring the use of a single variable in standard situations. Understanding when a decision should be referred to a manager or supervisor OTHER SKILLS AND ABILITIES Computer Skills: Computer literate with knowledge of Microsoft Office, specifically Word, Excel, Teams and Outlook. Mathematical Skills: Ability to understand and apply mathematical concepts such as addition, subtraction, multiplication and division. Travel: Regular visits to customer, supplier and job sites. Un-restricted ability to travel and spend time away from home for long periods. Other: Ability to work effectively and safely with power tools, chemicals and various materials as necessary to perform field service work. A high level of flexibility in your role and working hours will be required. A good level of physical fitness is required. Experience working on Construction Sites and/or in a construction environment is preferable Supervisor Fitter and Senior Supervisor Fitter: essential . Clean driving license is essential. Senior Supervisor Fitter: mentoring skills to develop, support and direct Fitters (Supervisor) and Supervisor Fitters WORK ENVIRONMENT The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The employee is regularly required to visit Client s work sites and other assembly premises, which will involve working in hazardous and access restricted environments. The noise level in the work environment is usually moderate to loud.

Focus areas of the role: The success of the role will be measured against the effective implementation of the following focus areas: Installation and calibration of all company machine control products including excavator, dozer, and roller solutions. Work with and assist machine control support Eng. where required. Manage and service machine control equipment reporting damages and issues to management team. Manage on-hire and off-hire diary for their assigned depot. Promotion and support of the company Machine Control products across all the construction sectors. Field, Depot and Remote based role requiring self-initiative and good time management with a reactive attitude to customer requirements. Delivery and collection of machine control equipment to customers and suppliers. Success enablers: To be successful in this role you will need the following skills, behaviours, and abilities: You will have a natural drive to collaborate with internal teams and customers, driving a real ONE TEAM approach. Provide quality and efficient machine control installations on in house plant machinery. Demonstrate good knowledge of auto electrical, mechanical, and hydraulic systems. Provide technical support via phone, email, and remote desktop software. Offer new installation ideas and innovative thinking. Document and report technical events and issues to management team. Education & Qualifications/Experience Higher Education Qualifications - Mechanical/Electrical engineering with 1-2 years site/plant fitter experience being advantageous but not necessary. Proven experience with auto electrical, mechanical and CAN Bus based systems. A working knowledge of electrical and mechanical plant machinery systems. Proven experience with basic tooling and fabrication methods I.e. Drilling, Tapping, Welding and steel fabrication. Demonstrates strong technical diagnostic skills. Experience of working within the UK construction industry is advantageous. Strong coherent communication skills, both verbally and written. Ability to understand and follow technical diagrams. A strong aptitude to technology and associated hardware developments. An understanding of UK construction practices is advantageous. Entrepreneurial drive and strong work ethic. Strong sense of urgency, responsibility and accountability. A clean UK driving licence. Manufacturer level training will be provided to the right candidate looking to expand their knowledge and skill set.

Role Information: Job title - A&I (Assembly and Installation) Fitter Salary - 32,000 Location - Merthyr Tydfil, South Wales Why join Marshall Land Systems in this role: The Assembly & Installation Fitter is responsible for the fitting and installation of machined parts, sheet metal components and various assembled parts in accordance with engineering drawings, technical specifications and quality standards. Working as part of a multidisciplinary production team, the role ensures all assembly and installation activities are completed safely, efficiently and to a high standard, supporting the delivery of projects on time and to customer expectations. Your responsibilities in this role include: Assemble and install components including machined parts, brackets, and other assembled parts Work from engineering drawings, technical specifications and associated design data Ensure all tasks are completed within allocated timeframes and to required quality standards Follow company production processes, procedures and configuration control requirements Maintain high standards of workmanship and attention to detail Comply with all health and safety policies and procedures Identify and report any issues, defects or non-conformances during assembly Support continuous improvement initiatives, including lean and 5S activities Maintain a clean, organised and compliant work area Ensure tools, equipment and materials are used correctly and maintained in good condition Accurately complete required documentation, including timesheets and job records Support production meetings or team briefings where required Apply if you have most of the following: Experience in a hands-on role requiring manual dexterity, precision and accuracy Background in any practical trade (e.g. mechanical fitting, vehicle body building, fabrication, construction or similar) Proven ability to work with tools and assemble components to fine tolerances Experience working in a workshop, site or manufacturing environment is beneficial Ability to follow instructions and work effectively as part of a team Technical skills/education: Apprenticeship (e.g. City & Guilds) or equivalent in a relevant trade (desirable) Ability to read and interpret engineering drawings and technical information Understanding of basic assembly and installation techniques Familiarity with workshop or site-based health and safety practices Basic knowledge of production processes and methods Good communication skills (written and verbal) Additional local needs: Onsite working Candidates will need to be able to obtain BPSS clearance The benefits in the role include: Development of practical and technical assembly skills Opportunity to gain experience across a range of engineering projects Clear progression pathways into senior fitter, specialist or supervisory roles Ongoing training and skill development in tools, systems and processes Exposure to engineering drawings, specifications and real-world applications Involvement in continuous improvement and operational excellence initiatives Marshall Land Systems is a Canadian-owned global company with an unrivalled pedigree of British engineering excellence. From its origins in Cambridge, UK, through more than a century of innovation, pioneering advances from the nose of Concorde to the early Hydrogen fuel cell technology that ultimately powered the moon landings, Marshall engineers now continue to innovate specialist vehicles and infrastructure for NATO forces across the world. From bomb disposal vehicles to deployed shelters, from command and control to CT scanners on the battlefield, Marshall Land Systems protects people in critical situations with the very best in engineering. It employs 600 people with major facilities the UK, Canada, and the Netherlands.

Role Information Electrical Fitter Salary 34,000 Merthyr Tydfil South Wales Onsite role Starting July 2026 Why join Marshall Land Systems in this role: The Electrical Fitter is responsible for the installation, assembly, and integration of electrical systems and components within specialist manufactured products. Working within a production environment, the role ensures electrical installations are completed safely, efficiently, and in accordance with engineering drawings, technical specifications, and quality standards. The Electrical Fitter contributes directly to achieving Safety, Quality, Cost, Delivery, and People (SQCDP) objectives by delivering high-quality electrical builds that meet production schedules and customer requirements. Working as part of a multidisciplinary production team, the Electrical Fitter ensures all work is carried out to the highest professional and technical standards while maintaining a strong focus on safety and continuous improvement. Your responsibilities in this role include: Install electrical systems, wiring looms, harnesses, and components in accordance with engineering drawings, build documentation, and work instructions. Carry out electrical assembly, routing, termination, and connection of wiring and electrical equipment. Support the integration of electrical systems into mechanical assemblies and vehicle platforms where applicable. Ensure all work is completed in line with the agreed production schedule and daily build plan. Use appropriate hand tools, electrical test equipment, and assembly equipment safely and effectively. Identify and report build issues, defects, or deviations from specification to the Team Leader or Supervisor. Assist with electrical fault finding and rectification during build and test activities. Ensure all electrical work is completed to a high standard and ready for inspection or testing. Carry out all tasks in accordance with safe systems of work and health and safety procedures. Ensure appropriate use of Personal Protective Equipment (PPE) at all times. Identify hazards and report any unsafe conditions, incidents, or near misses. Maintain a safe, clean, and organised working environment in line with 5S principles. Support the company's commitment to maintaining a safe production environment. Ensure electrical installations comply with engineering drawings, technical specifications, and company standards. Complete all build documentation, check sheets, and quality records accurately. Support quality inspections and testing processes. Identify non-conformances and assist with corrective actions where required. Maintain high standards of workmanship to ensure right-first-time build quality. Actively support continuous improvement initiatives within the production environment. Identify opportunities to improve electrical installation processes, efficiency, and build quality. Participate in Lean activities including 5S, standard work, and waste reduction initiatives. Support improvements that enhance safety, productivity, and delivery performance. Carry out electrical installation work within the scope of approved engineering documentation. Raise technical or quality concerns to the Team Leader or Supervisor where required. Provide feedback on build processes and potential improvements. Support resolution of electrical issues during production builds. Apply if you have most of the following; Experience working in a manufacturing, assembly, or vehicle build environment. Practical experience installing electrical systems, harnesses, and components. Experience interpreting electrical drawings and schematics. Experience working within a regulated or quality-controlled production environment - desirable. Technical skills/qualifications: Recognised apprenticeship in Electrical Engineering, Electrical Installation, or similar discipline - desirable. City & Guilds or NVQ Level 3 in Electrical Engineering or Electrical Installation - desirable. Relevant electrical safety training - desirable. Marshall Land Systems is a Canadian-owned global company with an unrivalled pedigree of British engineering excellence. From its origins in Cambridge, UK, through more than a century of innovation, pioneering advances from the nose of Concorde to the early Hydrogen fuel cell technology that ultimately powered the moon landings, Marshall engineers now continue to innovate specialist vehicles and infrastructure for NATO forces across the world. From bomb disposal vehicles to deployed shelters, from command and control to CT scanners on the battlefield, Marshall Land Systems protects people in critical situations with the very best in engineering. It employs 600 people with major facilities the UK, Canada, and the Netherlands.

Aircraft Engineering Supervisors (Wildcat) (Mechanical and Avionics) RNAS Yeovilton, Yeovil BA22 8HT Competitive salary plus benefits 38 hours /40 hours or 45 hours per week contracts available/ Monday- Friday Are you looking to develop a career in Aviation supporting the Royal Navy? Do you have hands on Aircraft experience, if so we would love to hear from you. Serco are proud to support the Fleet Air Arm, including the Wildcat Maritime Force (WMF) based at Royal Naval Air Station Yeovilton, delivering services ranging from the repair and maintenance of military aircraft- to fuel delivery and off aircraft support services. Yeovilton is one of the Royal Navy s two principal air stations, is one of the busiest military airfields in the UK and home to more than 100 aircraft. Serco have some exciting opportunities for Aircraft Engineering Supervisors (Any Trade) (Wildcat) to be based at our site at RNAS Yeovilton located in Somerset. This role is responsible for the aircraft management and ground support to our Wildcat aircrafts. Our Aircraft Engineering Supervisors carry out contracted tasks ensuring customer policy and regulations are met to a high standard, whilst ensuring any customer complaints or quality issues and business risks are raised with Team leads. Within this role, our Aircraft Fitters will comply with The Health and Safety at Work (HASAW) Act 1974 and Customer Policy and Regulations. You will be responsible for completing any administration duties required to the role and be willing to attend further training courses to develop your skills and knowledge in the role. We offer this position as either 40 or 45 hours per week, working Monday- Friday, plus an option to undertake shift work, with additional shift pay. What you'll need to do the role: Minimum of 6 years working in an airworthiness environment, relevant experience for the Wildcat aircraft, with a minimum of 2 years hands on experience Hold/have ability to hold Certificate of Competency for Supervisory level Attained formal training in the Wildcat aircraft and associated trade systems. Previous experience and a good working knowledge of the following: Wildcat Aircraft Engineering and Aircraft Systems (by Trade). Wildcat Aircraft Servicing and Support Equipment. Hold a certificate of Competency at Supervisor level An understanding of Lean Operating Procedures. An understanding of Naval Air Publications and Compound - Interactive Electronic Technical Publications (C-IETP). Adhere to Health and Safety, the Control of Substances Hazardous to Health (COSHH) Regulations, Tool Control and Quality Practices. An understanding of Engineering and Asset Management Systems. Completed or able to complete Maintenance Human Factors Course. Understand rotary wing military (aviation) procedures. An understanding of Airworthiness Engineering Safety and Compliance iaw Regulatory and Legislative requirements (MAA). A capability to work productively, efficiently & effectively with initiative and drive under tight timescales and pressure whilst maintaining operational outputs. Ability to achieve SC clearance What we offer: Salary: Competitive salaries with annual reviews Pension: Up to 6% contributory pension scheme Holidays: 28 days' annual leave plus bank holidays Training and development: We offer a wide range of learning opportunities with over 1,100 internal courses available, funding for qualifications and apprenticeships, mentoring opportunities, and a focus on internal progression Wellbeing: 24/7 Employee Assistance Programme, BUPA Anytime HealthLine, wellbeing app, Simplyhealth cash plans to claim back money towards healthcare costs, 30% off at Serco-managed leisure centres Discounts: Save across around 1,000 retailers, from food and clothing to days out, entertainment and travel ShareSave scheme: Helps you save regularly with the choice to buy Serco shares at a discount at the end of your savings period Employee networks: Dedicated networks where colleagues can come together to find support, share challenges, discuss ideas, network and be part of a community Charity: You can also choose to donate to your favourite charity tax-free, through our Payroll Giving Scheme. To discover more about our careers in Defence, meet our team, and to find out more about what we offer, please follow this Link . We're also a signatory of the UK Governments Women in Defence Charter, to find out more please click here . Please click on the apply button to complete your application. Occasionally we receive a large volume of applications for our roles and when that happens, we sometimes bring the closing date forward, so please apply promptly to avoid disappointment. At Serco, we see people first and foremost for their performance and potential. We are committed to building a diverse and inclusive organisation that supports the needs of all. As such we will make reasonable adjustments at interview through to employment for our candidates and strongly encourage applications from a diverse candidate pool. We are open to discussions around flexibility and flexible working. As a proud Disability Confident Leader and holder of the Gold Inclusive Employer Standard, disabled applicants who meet the minimum criteria for the job will be given the opportunity to demonstrate their abilities at an interview.

WORKSHOP ENGINEER/FITTER (GEARBOXES) HUDDERSFIELD DAYS 40,000- 45,000 We are looking for a motivated engineer to join a market leading manfacturing company within their respective field. Reporting directly to the engineering manager you will be a key member in ensuring the production facility is kept running. You will be involved in all aspects of planned and reactive maintenance within their operation. With progressive training and development this company is always is always looking to enhance its employees and their skill sets, whilst additionally being supported by a welcoming team of engineers. The position will appeal to a strong engineer looking for their next challenging role within in a secure and stable company. Role Description - Mechanical industrial gearbox fitting - Gearboxes ranging in size from 150kg - 10T - Strip, repair and rebuild of gearboxes (Helical, Worm, Bevel Helical & Spur Gearboxes) - Shafts, drives, bearings & casings Skills and Qualifications - Gearbox fitting experience (4 years ideally) - Apprentice trained/time served Background: Manufacturing In return for your commitment my client offers a stable and secure career for a technically motivated engineer. If you feel this is of interest please send your CV directly to Jordan Hindhaugh at or call for a confidential discussion on (phone number removed).

You will like Fulfilling HV Electrical AP duties from Bristol or Swansea for one of the largest contracting businesses in the UK, offering a broad scope of services including mechanical, electrical, high voltage, electrical vehicle (EV) infrastructure installation, test and inspection services, as well as street lighting. You can be proud to work with this employer who are recognised leaders in electrical contracting known for a professional an innovative approach to large & small projects. You will like The Senior Authorised Person (Senior AP HV Electrical) job itself where you will carry out LV & HV/EHV switching, isolation, earthing, PTW, SFT, identification of the point of work and issue of safety documentation duties on construction and asset replacement projects on SSEN and private networks. You will be responsible for all aspects of operational duties, creating switching schedules and methods of work. You ll control & monitor all Electrical construction and Fault restoration work on HV/LV networks up to 132kV. Ensuring the power distribution is maintained, you will be the delegated lead electrical person in cases of emergency and power restoration. More specifically: Plan outages, produce switching programmes, and liaise with System/Local Control. Make dead, isolate, and earth high-voltage electrical networks; carry out HV testing and fault location; issue Safety Documents, Permits to Work, and SFT. Lead and promote a positive safety culture develop SHE plans, review RAMS, deliver inductions and toolbox talks, investigate incidents, conduct site safety inspections, and ensure compliance with company and client rules. Provide full project management for smaller/non-complex projects, including client liaison, tender/bid support, and financial management (valuations, invoicing, meeting monthly targets). Manage and supervise Jointer and Fitter teams; provide technical expertise to the team and support clients with engineering solutions. Mentor trainee SAPs, oversee HV operations training, maintain operational authorisations, and report on trainee progress. This is a predominantly site-based role where you will be required to travel within our region. It could also require availability for weekend working and on-call duties on a rota basis. You will have To be successful as Senior Authorised Person you will have a healthy mix of the following: Authorised to conduct switching operations to from 11kV to 33 kV Hold a current DNO or equivalent Certificate of Authorisation An excellent attitude towards safety & operational excellence. Technical knowledge of DNO switchgear & associated plant. Excellent verbal & written communication skills and the ability to lead a team. Knowledge of current regulations, standards and codes of practice Nice to have - 132 kV Authorisations would be advantageous You will get As Senior Authorised Person you will enjoy a competitive base salary of £45K-£65K (for 37 hour week) + Package. Up to £79K for 45 hour week after internal authorisations. Benefits include car/allowance and pension. You can apply To Senior Authorised Person by pushing the button on this job posting (recommended), or by sending CV in confidence to (url removed) UK_MS

Mechanical Fitter Location - Stratford Upon Avon We are looking for Mechanical Fitters to work in our metal recycling shredder plant, assisting with maintaining fixed plant and machinery to best practice standards, whilst maintaining production at the highest possible level. Key Responsibilities Immediately respond to and assist in the correction of plant breakdowns Responsible for the repair of plant machinery and the maintenance of plant facilities, tooling and equipment Identify and bring to the attention of Site Management, opportunities for improving the reliability, efficiency and performance of site equipment. Provide technical support to site personnel. Assist in the operation of the site to ensure plant availability and production is maintained at the highest possible level Comply with all applicable legislation and company standards. Perform such other duties as the Company may from time to time reasonably require Comply with all Company policies related to Code of Conduct, Environmental, Health and Safety and Community Key Skills/Competencies Mechanical, welding and fabrication skills Qualifications Experience in medium to heavy industry Knowledge of health and safety processes and procedures Knowledge of hazard and risk assessment principles Knowledge of safe systems of work, including isolation procedures Experience working on industrial mechanical equipment Knowledge of lubrication principles and techniques FLT Licence desirable Mechanical, welding and fabrication experience/qualifications Working at height training desirable Harness training desirable Abrasive wheels training desirable Lifting and slinging training desirable Your benefits will include Competitive basic salary £Competitive Overtime Rates Additional Benefits 23 days holiday + bank holiday 6% Pension Contribution Simply health (gym and lifestyle discounts, contribution to dental/ medical/ physio/ etc.) life insurance, advice & counselling, virtual GP, and more! Cycle2work (huge discounts on bikes/equipment, 12 monthly payments 0% interest) Training provided as needed. Your CV will be forwarded to Jonathan Lee Recruitment, a leading engineering and manufacturing recruitment consultancy established in 1978. The services advertised by Jonathan Lee Recruitment are those of an Employment Agency. In order for your CV to be processed effectively, please ensure your name, email address, phone number and location (post code OR town OR county, as a minimum) are included.

MECHANICAL FITTER / ENGINEER BARNSLEY DAYS ONLY (MONDAY - FRIDAY) 30,000 - 33,000 We are looking for a motivated Mechanical Fitter / Engineer to join a market leading manufacturing company. Reporting directly to the engineering manager you will be a key member in ensuring the production facility is kept running. You will be involved in all aspects of planned and reactive maintenance within their operation. With progressive training and development this company is always is always looking to enhance its employees and their skill sets, whilst additionally being supported by a welcoming team of engineers. The position will appeal to a strong engineer looking for their next challenging role within in a secure and stable company. Role Description Providing both Reactive & PPM Working on a variety of machinery including gearboxes, rotating machinery, power transmutations etc. Being involved in Project Work Fault Finding Mechanical Skills and Qualifications Maintenance/Fitting Experience Mechanical Qualifications Desirable Fault Finding ability Mechanical Hydraulics and Pneumatics (Advantageous) In return for your commitment my client offers a stable and secure career for a technically motivated engineer. If you feel this is of interest please send your CV directly to Jordan Pannell at or call for a confidential discussion on (phone number removed).

2 x Earlies / 3 x Lates Earlies: 22.23 PAYE or 30.56 UMB - 06:00-14:15 (Mon-Thu) / 06:00-12:00 (Fri) Lates: 25.94 PAYE or 35.66 UMB - 14:15-22:30 (Mon-Thu) / 12:00-18:00 (Fri) Role Summary Working as part of an established team within the A350 department. This role is skilled and will undertake to strip, repair and assemble aircraft components and sub-assemblies. As a Skilled Operator, your role has an increased level of self-management, empowerment and a disciplined outlook to your everyday working. Skilled status also carries the responsibility for problem solving, team working and a will to succeed with the business. Essential Responsibilities EHS - Promote a safe workplace environment without risk to health and minimising the impact to the environment. Ensure that all Environmental, Health and Safety policies, procedures, rules and regulations are adhered to and that all accidents and incidents are reported Clocking and Booking - Ensure that all required clockings (time and attendance) and bookings (job costings) are made in an accurate and timely manner Housekeeping - Ensure that workstations are kept clean and maintained, with all tools and equipment stored correctly. Uphold a clear desk policy Quality - Ensure that all Quality standards, processes and procedures are complied with. All work is completed with care and attention minimising wastage Cost Management - Support cost reduction and management initiatives through reducing unnecessary expenditure Knowledge & Skills - Keep knowledge and training up to date for necessary operations to the best of your knowledge and belief to achieve specification and acceptable standards for your role. For example, Approved Operator (AO) stamp(s) to be kept up to date Team Working - Must actively participate in team meetings and be prepared to share knowledge, coach and mentor trainees when required, be willing to be trained in other areas Any other reasonable duties that fall in line with the level of the role Role Specific Duties Will include but is not limited to: Reporting directly to the section Flow Leader, participate within a team and work with functional specialists (such as engineering, Quality, etc) to ensure production requirements are achieved safely, on time and to the customer specifications Read and follow work instructions, specifications and part drawings (accessed via PC) Read and interpret engineering data, technical drawings, specifications, repair schemes, Manufacturing Procedures (MPs) and other approved maintenance data Accurately complete work route cards to maintain component traceability Measuring and marking out of materials to carry out close tolerance hand fitting processes Precision drilling, countersink, reaming and finishing of holes in aircraft structure assemblies Application of assembly techniques including riveting, mechanical fasteners and other bonding processes Sealing and jointing techniques for environmental protection and painting, alocrome of aircraft structures Application of bush and bearing installation Application of part mark on aircraft assemblies/sub-assemblies Assembly of pipework for various types of aircraft Alignment, pressure, electrical bonding testing and functional testing Preferred Candidate Requirements NVQ Level 3 or equivalent in Engineering or Manufacturing, or Time-served apprenticeship in allied trades Numeracy, literacy and IT skills, and able to read and understand technical documentation, including via computer/IT equipment Good planning and problem- solving skills Working understanding of the 5 S and lean principles Strong work ethic supported by a real positive attitude to succeed Excellent communication skills Demonstrate the currency and competency of the key skill codes required within department Great attention to the detail and accuracy of the task requirement Proven ability to actively participate in a team culture. To be able to work with minimal supervision Shift working required There are certain aspects of this role that require mechanical / manual lifting of parts so some lifting will be required and applicants must be capable of undertaking activities with appropriate assistance if required. Desirable Qualifications / Experience Previous experience of manufacture of complex metallic and composite structures Security Clearance Baseline Personnel Security Standard (BPSS) clearance is required and must be maintained for this role. Please note that in the event that BPSS clearance cannot be obtained, you may not be eligible for the role and/or any offer of employment may be withdrawn on grounds of national security.